shield

package
v0.101.0 Latest Latest
Warning

This package is not in the latest version of its module.

 Go to latest Published: Apr 11, 2024 License: Apache-2.0 Imports: 8 Imported by: 0

Documentation

Index

Constants

View Source 
const (
	ProactiveEngagementStatusEnabled  = ProactiveEngagementStatus("ENABLED")
	ProactiveEngagementStatusDisabled = ProactiveEngagementStatus("DISABLED")
)
View Source 
const (
	ProtectionApplicationLayerAutomaticResponseConfigurationStatusEnabled  = ProtectionApplicationLayerAutomaticResponseConfigurationStatus("ENABLED")
	ProtectionApplicationLayerAutomaticResponseConfigurationStatusDisabled = ProtectionApplicationLayerAutomaticResponseConfigurationStatus("DISABLED")
)
View Source 
const (
	ProtectionGroupAggregationSum  = ProtectionGroupAggregation("SUM")
	ProtectionGroupAggregationMean = ProtectionGroupAggregation("MEAN")
	ProtectionGroupAggregationMax  = ProtectionGroupAggregation("MAX")
)
View Source 
const (
	ProtectionGroupPatternAll            = ProtectionGroupPattern("ALL")
	ProtectionGroupPatternArbitrary      = ProtectionGroupPattern("ARBITRARY")
	ProtectionGroupPatternByResourceType = ProtectionGroupPattern("BY_RESOURCE_TYPE")
)
View Source 
const (
	ProtectionGroupResourceTypeCloudfrontDistribution  = ProtectionGroupResourceType("CLOUDFRONT_DISTRIBUTION")
	ProtectionGroupResourceTypeRoute53HostedZone       = ProtectionGroupResourceType("ROUTE_53_HOSTED_ZONE")
	ProtectionGroupResourceTypeElasticIpAllocation     = ProtectionGroupResourceType("ELASTIC_IP_ALLOCATION")
	ProtectionGroupResourceTypeClassicLoadBalancer     = ProtectionGroupResourceType("CLASSIC_LOAD_BALANCER")
	ProtectionGroupResourceTypeApplicationLoadBalancer = ProtectionGroupResourceType("APPLICATION_LOAD_BALANCER")
	ProtectionGroupResourceTypeGlobalAccelerator       = ProtectionGroupResourceType("GLOBAL_ACCELERATOR")
)

Variables

This section is empty.

Functions

This section is empty.

Types

type DrtAccess added in v0.72.0 

type DrtAccess struct {
	pulumi.CustomResourceState

	AccountId pulumi.StringOutput `pulumi:"accountId"`
	// Authorizes the Shield Response Team (SRT) to access the specified Amazon S3 bucket containing log data such as Application Load Balancer access logs, CloudFront logs, or logs from third party sources. You can associate up to 10 Amazon S3 buckets with your subscription.
	LogBucketList pulumi.StringArrayOutput `pulumi:"logBucketList"`
	// Authorizes the Shield Response Team (SRT) using the specified role, to access your AWS account to assist with DDoS attack mitigation during potential attacks. This enables the SRT to inspect your AWS WAF configuration and create or update AWS WAF rules and web ACLs.
	RoleArn pulumi.StringOutput `pulumi:"roleArn"`
}

Config the role and list of Amazon S3 log buckets used by the Shield Response Team (SRT) to access your AWS account while assisting with attack mitigation.

func GetDrtAccess added in v0.72.0 

func GetDrtAccess(ctx *pulumi.Context,
	name string, id pulumi.IDInput, state *DrtAccessState, opts ...pulumi.ResourceOption) (*DrtAccess, error)

GetDrtAccess gets an existing DrtAccess resource's state with the given name, ID, and optional state properties that are used to uniquely qualify the lookup (nil if not required).

func NewDrtAccess added in v0.72.0 

func NewDrtAccess(ctx *pulumi.Context,
	name string, args *DrtAccessArgs, opts ...pulumi.ResourceOption) (*DrtAccess, error)

NewDrtAccess registers a new resource with the given unique name, arguments, and options.

func (*DrtAccess) ElementType added in v0.72.0 

func (*DrtAccess) ElementType() reflect.Type

func (*DrtAccess) ToDrtAccessOutput added in v0.72.0 

func (i *DrtAccess) ToDrtAccessOutput() DrtAccessOutput

func (*DrtAccess) ToDrtAccessOutputWithContext added in v0.72.0 

func (i *DrtAccess) ToDrtAccessOutputWithContext(ctx context.Context) DrtAccessOutput

type DrtAccessArgs added in v0.72.0 

type DrtAccessArgs struct {
	// Authorizes the Shield Response Team (SRT) to access the specified Amazon S3 bucket containing log data such as Application Load Balancer access logs, CloudFront logs, or logs from third party sources. You can associate up to 10 Amazon S3 buckets with your subscription.
	LogBucketList pulumi.StringArrayInput
	// Authorizes the Shield Response Team (SRT) using the specified role, to access your AWS account to assist with DDoS attack mitigation during potential attacks. This enables the SRT to inspect your AWS WAF configuration and create or update AWS WAF rules and web ACLs.
	RoleArn pulumi.StringInput
}

The set of arguments for constructing a DrtAccess resource.

func (DrtAccessArgs) ElementType added in v0.72.0 

func (DrtAccessArgs) ElementType() reflect.Type

type DrtAccessInput added in v0.72.0 

type DrtAccessInput interface {
	pulumi.Input

	ToDrtAccessOutput() DrtAccessOutput
	ToDrtAccessOutputWithContext(ctx context.Context) DrtAccessOutput
}

type DrtAccessOutput added in v0.72.0 

type DrtAccessOutput struct{ *pulumi.OutputState }

func (DrtAccessOutput) AccountId added in v0.72.0 

func (o DrtAccessOutput) AccountId() pulumi.StringOutput

func (DrtAccessOutput) ElementType added in v0.72.0 

func (DrtAccessOutput) ElementType() reflect.Type

func (DrtAccessOutput) LogBucketList added in v0.72.0 

func (o DrtAccessOutput) LogBucketList() pulumi.StringArrayOutput

Authorizes the Shield Response Team (SRT) to access the specified Amazon S3 bucket containing log data such as Application Load Balancer access logs, CloudFront logs, or logs from third party sources. You can associate up to 10 Amazon S3 buckets with your subscription.

func (DrtAccessOutput) RoleArn added in v0.72.0 

func (o DrtAccessOutput) RoleArn() pulumi.StringOutput

Authorizes the Shield Response Team (SRT) using the specified role, to access your AWS account to assist with DDoS attack mitigation during potential attacks. This enables the SRT to inspect your AWS WAF configuration and create or update AWS WAF rules and web ACLs.

func (DrtAccessOutput) ToDrtAccessOutput added in v0.72.0 

func (o DrtAccessOutput) ToDrtAccessOutput() DrtAccessOutput

func (DrtAccessOutput) ToDrtAccessOutputWithContext added in v0.72.0 

func (o DrtAccessOutput) ToDrtAccessOutputWithContext(ctx context.Context) DrtAccessOutput

type DrtAccessState added in v0.72.0 

type DrtAccessState struct {
}

func (DrtAccessState) ElementType added in v0.72.0 

func (DrtAccessState) ElementType() reflect.Type

type LookupDrtAccessArgs added in v0.72.0 

type LookupDrtAccessArgs struct {
	AccountId string `pulumi:"accountId"`
}

type LookupDrtAccessOutputArgs added in v0.72.0 

type LookupDrtAccessOutputArgs struct {
	AccountId pulumi.StringInput `pulumi:"accountId"`
}

func (LookupDrtAccessOutputArgs) ElementType added in v0.72.0 

func (LookupDrtAccessOutputArgs) ElementType() reflect.Type

type LookupDrtAccessResult added in v0.72.0 

type LookupDrtAccessResult struct {
	AccountId *string `pulumi:"accountId"`
	// Authorizes the Shield Response Team (SRT) to access the specified Amazon S3 bucket containing log data such as Application Load Balancer access logs, CloudFront logs, or logs from third party sources. You can associate up to 10 Amazon S3 buckets with your subscription.
	LogBucketList []string `pulumi:"logBucketList"`
	// Authorizes the Shield Response Team (SRT) using the specified role, to access your AWS account to assist with DDoS attack mitigation during potential attacks. This enables the SRT to inspect your AWS WAF configuration and create or update AWS WAF rules and web ACLs.
	RoleArn *string `pulumi:"roleArn"`
}

func LookupDrtAccess added in v0.72.0 

func LookupDrtAccess(ctx *pulumi.Context, args *LookupDrtAccessArgs, opts ...pulumi.InvokeOption) (*LookupDrtAccessResult, error)

Config the role and list of Amazon S3 log buckets used by the Shield Response Team (SRT) to access your AWS account while assisting with attack mitigation.

type LookupDrtAccessResultOutput added in v0.72.0 

type LookupDrtAccessResultOutput struct{ *pulumi.OutputState }

func LookupDrtAccessOutput added in v0.72.0 

func LookupDrtAccessOutput(ctx *pulumi.Context, args LookupDrtAccessOutputArgs, opts ...pulumi.InvokeOption) LookupDrtAccessResultOutput

func (LookupDrtAccessResultOutput) AccountId added in v0.72.0 

func (o LookupDrtAccessResultOutput) AccountId() pulumi.StringPtrOutput

func (LookupDrtAccessResultOutput) ElementType added in v0.72.0 

func (LookupDrtAccessResultOutput) ElementType() reflect.Type

func (LookupDrtAccessResultOutput) LogBucketList added in v0.72.0 

func (o LookupDrtAccessResultOutput) LogBucketList() pulumi.StringArrayOutput

Authorizes the Shield Response Team (SRT) to access the specified Amazon S3 bucket containing log data such as Application Load Balancer access logs, CloudFront logs, or logs from third party sources. You can associate up to 10 Amazon S3 buckets with your subscription.

func (LookupDrtAccessResultOutput) RoleArn added in v0.72.0 

func (o LookupDrtAccessResultOutput) RoleArn() pulumi.StringPtrOutput

Authorizes the Shield Response Team (SRT) using the specified role, to access your AWS account to assist with DDoS attack mitigation during potential attacks. This enables the SRT to inspect your AWS WAF configuration and create or update AWS WAF rules and web ACLs.

func (LookupDrtAccessResultOutput) ToLookupDrtAccessResultOutput added in v0.72.0 

func (o LookupDrtAccessResultOutput) ToLookupDrtAccessResultOutput() LookupDrtAccessResultOutput

func (LookupDrtAccessResultOutput) ToLookupDrtAccessResultOutputWithContext added in v0.72.0 

func (o LookupDrtAccessResultOutput) ToLookupDrtAccessResultOutputWithContext(ctx context.Context) LookupDrtAccessResultOutput

type LookupProactiveEngagementArgs 

type LookupProactiveEngagementArgs struct {
	AccountId string `pulumi:"accountId"`
}

type LookupProactiveEngagementOutputArgs 

type LookupProactiveEngagementOutputArgs struct {
	AccountId pulumi.StringInput `pulumi:"accountId"`
}

func (LookupProactiveEngagementOutputArgs) ElementType 

func (LookupProactiveEngagementOutputArgs) ElementType() reflect.Type

type LookupProactiveEngagementResult 

type LookupProactiveEngagementResult struct {
	AccountId *string `pulumi:"accountId"`
	// A list of email addresses and phone numbers that the Shield Response Team (SRT) can use to contact you for escalations to the SRT and to initiate proactive customer support.
	// To enable proactive engagement, the contact list must include at least one phone number.
	EmergencyContactList []ProactiveEngagementEmergencyContact `pulumi:"emergencyContactList"`
	// If `ENABLED`, the Shield Response Team (SRT) will use email and phone to notify contacts about escalations to the SRT and to initiate proactive customer support.
	// If `DISABLED`, the SRT will not proactively notify contacts about escalations or to initiate proactive customer support.
	ProactiveEngagementStatus *ProactiveEngagementStatus `pulumi:"proactiveEngagementStatus"`
}

func LookupProactiveEngagement 

func LookupProactiveEngagement(ctx *pulumi.Context, args *LookupProactiveEngagementArgs, opts ...pulumi.InvokeOption) (*LookupProactiveEngagementResult, error)

Authorizes the Shield Response Team (SRT) to use email and phone to notify contacts about escalations to the SRT and to initiate proactive customer support.

type LookupProactiveEngagementResultOutput 

type LookupProactiveEngagementResultOutput struct{ *pulumi.OutputState }

func LookupProactiveEngagementOutput 

func LookupProactiveEngagementOutput(ctx *pulumi.Context, args LookupProactiveEngagementOutputArgs, opts ...pulumi.InvokeOption) LookupProactiveEngagementResultOutput

func (LookupProactiveEngagementResultOutput) AccountId 

func (o LookupProactiveEngagementResultOutput) AccountId() pulumi.StringPtrOutput

func (LookupProactiveEngagementResultOutput) ElementType 

func (LookupProactiveEngagementResultOutput) ElementType() reflect.Type

func (LookupProactiveEngagementResultOutput) EmergencyContactList 

func (o LookupProactiveEngagementResultOutput) EmergencyContactList() ProactiveEngagementEmergencyContactArrayOutput

A list of email addresses and phone numbers that the Shield Response Team (SRT) can use to contact you for escalations to the SRT and to initiate proactive customer support. To enable proactive engagement, the contact list must include at least one phone number.

func (LookupProactiveEngagementResultOutput) ProactiveEngagementStatus 

func (o LookupProactiveEngagementResultOutput) ProactiveEngagementStatus() ProactiveEngagementStatusPtrOutput

If `ENABLED`, the Shield Response Team (SRT) will use email and phone to notify contacts about escalations to the SRT and to initiate proactive customer support. If `DISABLED`, the SRT will not proactively notify contacts about escalations or to initiate proactive customer support.

func (LookupProactiveEngagementResultOutput) ToLookupProactiveEngagementResultOutput 

func (o LookupProactiveEngagementResultOutput) ToLookupProactiveEngagementResultOutput() LookupProactiveEngagementResultOutput

func (LookupProactiveEngagementResultOutput) ToLookupProactiveEngagementResultOutputWithContext 

func (o LookupProactiveEngagementResultOutput) ToLookupProactiveEngagementResultOutputWithContext(ctx context.Context) LookupProactiveEngagementResultOutput

type LookupProtectionArgs 

type LookupProtectionArgs struct {
	// The ARN (Amazon Resource Name) of the protection.
	ProtectionArn string `pulumi:"protectionArn"`
}

type LookupProtectionGroupArgs 

type LookupProtectionGroupArgs struct {
	// The ARN (Amazon Resource Name) of the protection group.
	ProtectionGroupArn string `pulumi:"protectionGroupArn"`
}

type LookupProtectionGroupOutputArgs 

type LookupProtectionGroupOutputArgs struct {
	// The ARN (Amazon Resource Name) of the protection group.
	ProtectionGroupArn pulumi.StringInput `pulumi:"protectionGroupArn"`
}

func (LookupProtectionGroupOutputArgs) ElementType 

func (LookupProtectionGroupOutputArgs) ElementType() reflect.Type

type LookupProtectionGroupResult 

type LookupProtectionGroupResult struct {
	// Defines how AWS Shield combines resource data for the group in order to detect, mitigate, and report events.
	// * Sum - Use the total traffic across the group. This is a good choice for most cases. Examples include Elastic IP addresses for EC2 instances that scale manually or automatically.
	// * Mean - Use the average of the traffic across the group. This is a good choice for resources that share traffic uniformly. Examples include accelerators and load balancers.
	// * Max - Use the highest traffic from each resource. This is useful for resources that don't share traffic and for resources that share that traffic in a non-uniform way. Examples include Amazon CloudFront and origin resources for CloudFront distributions.
	Aggregation *ProtectionGroupAggregation `pulumi:"aggregation"`
	// The Amazon Resource Names (ARNs) of the resources to include in the protection group. You must set this when you set `Pattern` to `ARBITRARY` and you must not set it for any other `Pattern` setting.
	Members []string `pulumi:"members"`
	// The criteria to use to choose the protected resources for inclusion in the group. You can include all resources that have protections, provide a list of resource Amazon Resource Names (ARNs), or include all resources of a specified resource type.
	Pattern *ProtectionGroupPattern `pulumi:"pattern"`
	// The ARN (Amazon Resource Name) of the protection group.
	ProtectionGroupArn *string `pulumi:"protectionGroupArn"`
	// The resource type to include in the protection group. All protected resources of this type are included in the protection group. Newly protected resources of this type are automatically added to the group. You must set this when you set `Pattern` to `BY_RESOURCE_TYPE` and you must not set it for any other `Pattern` setting.
	ResourceType *ProtectionGroupResourceType `pulumi:"resourceType"`
	// One or more tag key-value pairs for the Protection object.
	Tags []aws.Tag `pulumi:"tags"`
}

func LookupProtectionGroup 

func LookupProtectionGroup(ctx *pulumi.Context, args *LookupProtectionGroupArgs, opts ...pulumi.InvokeOption) (*LookupProtectionGroupResult, error)

A grouping of protected resources so they can be handled as a collective. This resource grouping improves the accuracy of detection and reduces false positives.

type LookupProtectionGroupResultOutput 

type LookupProtectionGroupResultOutput struct{ *pulumi.OutputState }

func LookupProtectionGroupOutput 

func LookupProtectionGroupOutput(ctx *pulumi.Context, args LookupProtectionGroupOutputArgs, opts ...pulumi.InvokeOption) LookupProtectionGroupResultOutput

func (LookupProtectionGroupResultOutput) Aggregation 

func (o LookupProtectionGroupResultOutput) Aggregation() ProtectionGroupAggregationPtrOutput

Defines how AWS Shield combines resource data for the group in order to detect, mitigate, and report events. * Sum - Use the total traffic across the group. This is a good choice for most cases. Examples include Elastic IP addresses for EC2 instances that scale manually or automatically. * Mean - Use the average of the traffic across the group. This is a good choice for resources that share traffic uniformly. Examples include accelerators and load balancers. * Max - Use the highest traffic from each resource. This is useful for resources that don't share traffic and for resources that share that traffic in a non-uniform way. Examples include Amazon CloudFront and origin resources for CloudFront distributions.

func (LookupProtectionGroupResultOutput) ElementType 

func (LookupProtectionGroupResultOutput) ElementType() reflect.Type

func (LookupProtectionGroupResultOutput) Members 

func (o LookupProtectionGroupResultOutput) Members() pulumi.StringArrayOutput

The Amazon Resource Names (ARNs) of the resources to include in the protection group. You must set this when you set `Pattern` to `ARBITRARY` and you must not set it for any other `Pattern` setting.

func (LookupProtectionGroupResultOutput) Pattern 

func (o LookupProtectionGroupResultOutput) Pattern() ProtectionGroupPatternPtrOutput

The criteria to use to choose the protected resources for inclusion in the group. You can include all resources that have protections, provide a list of resource Amazon Resource Names (ARNs), or include all resources of a specified resource type.

func (LookupProtectionGroupResultOutput) ProtectionGroupArn 

func (o LookupProtectionGroupResultOutput) ProtectionGroupArn() pulumi.StringPtrOutput

The ARN (Amazon Resource Name) of the protection group.

func (LookupProtectionGroupResultOutput) ResourceType 

func (o LookupProtectionGroupResultOutput) ResourceType() ProtectionGroupResourceTypePtrOutput

The resource type to include in the protection group. All protected resources of this type are included in the protection group. Newly protected resources of this type are automatically added to the group. You must set this when you set `Pattern` to `BY_RESOURCE_TYPE` and you must not set it for any other `Pattern` setting.

func (LookupProtectionGroupResultOutput) Tags 

func (o LookupProtectionGroupResultOutput) Tags() aws.TagArrayOutput

One or more tag key-value pairs for the Protection object.

func (LookupProtectionGroupResultOutput) ToLookupProtectionGroupResultOutput 

func (o LookupProtectionGroupResultOutput) ToLookupProtectionGroupResultOutput() LookupProtectionGroupResultOutput

func (LookupProtectionGroupResultOutput) ToLookupProtectionGroupResultOutputWithContext 

func (o LookupProtectionGroupResultOutput) ToLookupProtectionGroupResultOutputWithContext(ctx context.Context) LookupProtectionGroupResultOutput

type LookupProtectionOutputArgs 

type LookupProtectionOutputArgs struct {
	// The ARN (Amazon Resource Name) of the protection.
	ProtectionArn pulumi.StringInput `pulumi:"protectionArn"`
}

func (LookupProtectionOutputArgs) ElementType 

func (LookupProtectionOutputArgs) ElementType() reflect.Type

type LookupProtectionResult 

type LookupProtectionResult struct {
	ApplicationLayerAutomaticResponseConfiguration *ProtectionApplicationLayerAutomaticResponseConfiguration `pulumi:"applicationLayerAutomaticResponseConfiguration"`
	// The Amazon Resource Names (ARNs) of the health check to associate with the protection.
	HealthCheckArns []string `pulumi:"healthCheckArns"`
	// The ARN (Amazon Resource Name) of the protection.
	ProtectionArn *string `pulumi:"protectionArn"`
	// The unique identifier (ID) of the protection.
	ProtectionId *string `pulumi:"protectionId"`
	// One or more tag key-value pairs for the Protection object.
	Tags []aws.Tag `pulumi:"tags"`
}

func LookupProtection 

func LookupProtection(ctx *pulumi.Context, args *LookupProtectionArgs, opts ...pulumi.InvokeOption) (*LookupProtectionResult, error)

Enables AWS Shield Advanced for a specific AWS resource. The resource can be an Amazon CloudFront distribution, Amazon Route 53 hosted zone, AWS Global Accelerator standard accelerator, Elastic IP Address, Application Load Balancer, or a Classic Load Balancer. You can protect Amazon EC2 instances and Network Load Balancers by association with protected Amazon EC2 Elastic IP addresses.

type LookupProtectionResultOutput 

type LookupProtectionResultOutput struct{ *pulumi.OutputState }

func LookupProtectionOutput 

func LookupProtectionOutput(ctx *pulumi.Context, args LookupProtectionOutputArgs, opts ...pulumi.InvokeOption) LookupProtectionResultOutput

func (LookupProtectionResultOutput) ApplicationLayerAutomaticResponseConfiguration 

func (o LookupProtectionResultOutput) ApplicationLayerAutomaticResponseConfiguration() ProtectionApplicationLayerAutomaticResponseConfigurationPtrOutput

func (LookupProtectionResultOutput) ElementType 

func (LookupProtectionResultOutput) ElementType() reflect.Type

func (LookupProtectionResultOutput) HealthCheckArns 

func (o LookupProtectionResultOutput) HealthCheckArns() pulumi.StringArrayOutput

The Amazon Resource Names (ARNs) of the health check to associate with the protection.

func (LookupProtectionResultOutput) ProtectionArn 

func (o LookupProtectionResultOutput) ProtectionArn() pulumi.StringPtrOutput

The ARN (Amazon Resource Name) of the protection.

func (LookupProtectionResultOutput) ProtectionId 

func (o LookupProtectionResultOutput) ProtectionId() pulumi.StringPtrOutput

The unique identifier (ID) of the protection.

func (LookupProtectionResultOutput) Tags 

func (o LookupProtectionResultOutput) Tags() aws.TagArrayOutput

One or more tag key-value pairs for the Protection object.

func (LookupProtectionResultOutput) ToLookupProtectionResultOutput 

func (o LookupProtectionResultOutput) ToLookupProtectionResultOutput() LookupProtectionResultOutput

func (LookupProtectionResultOutput) ToLookupProtectionResultOutputWithContext 

func (o LookupProtectionResultOutput) ToLookupProtectionResultOutputWithContext(ctx context.Context) LookupProtectionResultOutput

type ProactiveEngagement 

type ProactiveEngagement struct {
	pulumi.CustomResourceState

	AccountId pulumi.StringOutput `pulumi:"accountId"`
	// A list of email addresses and phone numbers that the Shield Response Team (SRT) can use to contact you for escalations to the SRT and to initiate proactive customer support.
	// To enable proactive engagement, the contact list must include at least one phone number.
	EmergencyContactList ProactiveEngagementEmergencyContactArrayOutput `pulumi:"emergencyContactList"`
	// If `ENABLED`, the Shield Response Team (SRT) will use email and phone to notify contacts about escalations to the SRT and to initiate proactive customer support.
	// If `DISABLED`, the SRT will not proactively notify contacts about escalations or to initiate proactive customer support.
	ProactiveEngagementStatus ProactiveEngagementStatusOutput `pulumi:"proactiveEngagementStatus"`
}

Authorizes the Shield Response Team (SRT) to use email and phone to notify contacts about escalations to the SRT and to initiate proactive customer support.

func GetProactiveEngagement 

func GetProactiveEngagement(ctx *pulumi.Context,
	name string, id pulumi.IDInput, state *ProactiveEngagementState, opts ...pulumi.ResourceOption) (*ProactiveEngagement, error)

GetProactiveEngagement gets an existing ProactiveEngagement resource's state with the given name, ID, and optional state properties that are used to uniquely qualify the lookup (nil if not required).

func NewProactiveEngagement 

func NewProactiveEngagement(ctx *pulumi.Context,
	name string, args *ProactiveEngagementArgs, opts ...pulumi.ResourceOption) (*ProactiveEngagement, error)

NewProactiveEngagement registers a new resource with the given unique name, arguments, and options.

func (*ProactiveEngagement) ElementType 

func (*ProactiveEngagement) ElementType() reflect.Type

func (*ProactiveEngagement) ToProactiveEngagementOutput 

func (i *ProactiveEngagement) ToProactiveEngagementOutput() ProactiveEngagementOutput

func (*ProactiveEngagement) ToProactiveEngagementOutputWithContext 

func (i *ProactiveEngagement) ToProactiveEngagementOutputWithContext(ctx context.Context) ProactiveEngagementOutput

type ProactiveEngagementArgs 

type ProactiveEngagementArgs struct {
	// A list of email addresses and phone numbers that the Shield Response Team (SRT) can use to contact you for escalations to the SRT and to initiate proactive customer support.
	// To enable proactive engagement, the contact list must include at least one phone number.
	EmergencyContactList ProactiveEngagementEmergencyContactArrayInput
	// If `ENABLED`, the Shield Response Team (SRT) will use email and phone to notify contacts about escalations to the SRT and to initiate proactive customer support.
	// If `DISABLED`, the SRT will not proactively notify contacts about escalations or to initiate proactive customer support.
	ProactiveEngagementStatus ProactiveEngagementStatusInput
}

The set of arguments for constructing a ProactiveEngagement resource.

func (ProactiveEngagementArgs) ElementType 

func (ProactiveEngagementArgs) ElementType() reflect.Type

type ProactiveEngagementEmergencyContact 

type ProactiveEngagementEmergencyContact struct {
	// Additional notes regarding the contact.
	ContactNotes *string `pulumi:"contactNotes"`
	// The email address for the contact.
	EmailAddress string `pulumi:"emailAddress"`
	// The phone number for the contact
	PhoneNumber *string `pulumi:"phoneNumber"`
}

An emergency contact is used by Shield Response Team (SRT) to contact you for escalations to the SRT and to initiate proactive customer support. An emergency contact requires an email address.

type ProactiveEngagementEmergencyContactArgs 

type ProactiveEngagementEmergencyContactArgs struct {
	// Additional notes regarding the contact.
	ContactNotes pulumi.StringPtrInput `pulumi:"contactNotes"`
	// The email address for the contact.
	EmailAddress pulumi.StringInput `pulumi:"emailAddress"`
	// The phone number for the contact
	PhoneNumber pulumi.StringPtrInput `pulumi:"phoneNumber"`
}

An emergency contact is used by Shield Response Team (SRT) to contact you for escalations to the SRT and to initiate proactive customer support. An emergency contact requires an email address.

func (ProactiveEngagementEmergencyContactArgs) ElementType 

func (ProactiveEngagementEmergencyContactArgs) ElementType() reflect.Type

func (ProactiveEngagementEmergencyContactArgs) ToProactiveEngagementEmergencyContactOutput 

func (i ProactiveEngagementEmergencyContactArgs) ToProactiveEngagementEmergencyContactOutput() ProactiveEngagementEmergencyContactOutput

func (ProactiveEngagementEmergencyContactArgs) ToProactiveEngagementEmergencyContactOutputWithContext 

func (i ProactiveEngagementEmergencyContactArgs) ToProactiveEngagementEmergencyContactOutputWithContext(ctx context.Context) ProactiveEngagementEmergencyContactOutput

type ProactiveEngagementEmergencyContactArray 

type ProactiveEngagementEmergencyContactArray []ProactiveEngagementEmergencyContactInput

func (ProactiveEngagementEmergencyContactArray) ElementType 

func (ProactiveEngagementEmergencyContactArray) ElementType() reflect.Type

func (ProactiveEngagementEmergencyContactArray) ToProactiveEngagementEmergencyContactArrayOutput 

func (i ProactiveEngagementEmergencyContactArray) ToProactiveEngagementEmergencyContactArrayOutput() ProactiveEngagementEmergencyContactArrayOutput

func (ProactiveEngagementEmergencyContactArray) ToProactiveEngagementEmergencyContactArrayOutputWithContext 

func (i ProactiveEngagementEmergencyContactArray) ToProactiveEngagementEmergencyContactArrayOutputWithContext(ctx context.Context) ProactiveEngagementEmergencyContactArrayOutput

type ProactiveEngagementEmergencyContactArrayInput 

type ProactiveEngagementEmergencyContactArrayInput interface {
	pulumi.Input

	ToProactiveEngagementEmergencyContactArrayOutput() ProactiveEngagementEmergencyContactArrayOutput
	ToProactiveEngagementEmergencyContactArrayOutputWithContext(context.Context) ProactiveEngagementEmergencyContactArrayOutput
}

ProactiveEngagementEmergencyContactArrayInput is an input type that accepts ProactiveEngagementEmergencyContactArray and ProactiveEngagementEmergencyContactArrayOutput values. You can construct a concrete instance of `ProactiveEngagementEmergencyContactArrayInput` via: 

ProactiveEngagementEmergencyContactArray{ ProactiveEngagementEmergencyContactArgs{...} }

type ProactiveEngagementEmergencyContactArrayOutput 

type ProactiveEngagementEmergencyContactArrayOutput struct{ *pulumi.OutputState }

func (ProactiveEngagementEmergencyContactArrayOutput) ElementType 

func (ProactiveEngagementEmergencyContactArrayOutput) ElementType() reflect.Type

func (ProactiveEngagementEmergencyContactArrayOutput) Index 

func (o ProactiveEngagementEmergencyContactArrayOutput) Index(i pulumi.IntInput) ProactiveEngagementEmergencyContactOutput

func (ProactiveEngagementEmergencyContactArrayOutput) ToProactiveEngagementEmergencyContactArrayOutput 

func (o ProactiveEngagementEmergencyContactArrayOutput) ToProactiveEngagementEmergencyContactArrayOutput() ProactiveEngagementEmergencyContactArrayOutput

func (ProactiveEngagementEmergencyContactArrayOutput) ToProactiveEngagementEmergencyContactArrayOutputWithContext 

func (o ProactiveEngagementEmergencyContactArrayOutput) ToProactiveEngagementEmergencyContactArrayOutputWithContext(ctx context.Context) ProactiveEngagementEmergencyContactArrayOutput

type ProactiveEngagementEmergencyContactInput 

type ProactiveEngagementEmergencyContactInput interface {
	pulumi.Input

	ToProactiveEngagementEmergencyContactOutput() ProactiveEngagementEmergencyContactOutput
	ToProactiveEngagementEmergencyContactOutputWithContext(context.Context) ProactiveEngagementEmergencyContactOutput
}

ProactiveEngagementEmergencyContactInput is an input type that accepts ProactiveEngagementEmergencyContactArgs and ProactiveEngagementEmergencyContactOutput values. You can construct a concrete instance of `ProactiveEngagementEmergencyContactInput` via: 

ProactiveEngagementEmergencyContactArgs{...}

type ProactiveEngagementEmergencyContactOutput 

type ProactiveEngagementEmergencyContactOutput struct{ *pulumi.OutputState }

An emergency contact is used by Shield Response Team (SRT) to contact you for escalations to the SRT and to initiate proactive customer support. An emergency contact requires an email address.

func (ProactiveEngagementEmergencyContactOutput) ContactNotes 

func (o ProactiveEngagementEmergencyContactOutput) ContactNotes() pulumi.StringPtrOutput

Additional notes regarding the contact.

func (ProactiveEngagementEmergencyContactOutput) ElementType 

func (ProactiveEngagementEmergencyContactOutput) ElementType() reflect.Type

func (ProactiveEngagementEmergencyContactOutput) EmailAddress 

func (o ProactiveEngagementEmergencyContactOutput) EmailAddress() pulumi.StringOutput

The email address for the contact.

func (ProactiveEngagementEmergencyContactOutput) PhoneNumber 

func (o ProactiveEngagementEmergencyContactOutput) PhoneNumber() pulumi.StringPtrOutput

The phone number for the contact

func (ProactiveEngagementEmergencyContactOutput) ToProactiveEngagementEmergencyContactOutput 

func (o ProactiveEngagementEmergencyContactOutput) ToProactiveEngagementEmergencyContactOutput() ProactiveEngagementEmergencyContactOutput

func (ProactiveEngagementEmergencyContactOutput) ToProactiveEngagementEmergencyContactOutputWithContext 

func (o ProactiveEngagementEmergencyContactOutput) ToProactiveEngagementEmergencyContactOutputWithContext(ctx context.Context) ProactiveEngagementEmergencyContactOutput

type ProactiveEngagementInput 

type ProactiveEngagementInput interface {
	pulumi.Input

	ToProactiveEngagementOutput() ProactiveEngagementOutput
	ToProactiveEngagementOutputWithContext(ctx context.Context) ProactiveEngagementOutput
}

type ProactiveEngagementOutput 

type ProactiveEngagementOutput struct{ *pulumi.OutputState }

func (ProactiveEngagementOutput) AccountId 

func (o ProactiveEngagementOutput) AccountId() pulumi.StringOutput

func (ProactiveEngagementOutput) ElementType 

func (ProactiveEngagementOutput) ElementType() reflect.Type

func (ProactiveEngagementOutput) EmergencyContactList 

func (o ProactiveEngagementOutput) EmergencyContactList() ProactiveEngagementEmergencyContactArrayOutput

A list of email addresses and phone numbers that the Shield Response Team (SRT) can use to contact you for escalations to the SRT and to initiate proactive customer support. To enable proactive engagement, the contact list must include at least one phone number.

func (ProactiveEngagementOutput) ProactiveEngagementStatus 

func (o ProactiveEngagementOutput) ProactiveEngagementStatus() ProactiveEngagementStatusOutput

If `ENABLED`, the Shield Response Team (SRT) will use email and phone to notify contacts about escalations to the SRT and to initiate proactive customer support. If `DISABLED`, the SRT will not proactively notify contacts about escalations or to initiate proactive customer support.

func (ProactiveEngagementOutput) ToProactiveEngagementOutput 

func (o ProactiveEngagementOutput) ToProactiveEngagementOutput() ProactiveEngagementOutput

func (ProactiveEngagementOutput) ToProactiveEngagementOutputWithContext 

func (o ProactiveEngagementOutput) ToProactiveEngagementOutputWithContext(ctx context.Context) ProactiveEngagementOutput

type ProactiveEngagementState 

type ProactiveEngagementState struct {
}

func (ProactiveEngagementState) ElementType 

func (ProactiveEngagementState) ElementType() reflect.Type

type ProactiveEngagementStatus 

type ProactiveEngagementStatus string

If `ENABLED`, the Shield Response Team (SRT) will use email and phone to notify contacts about escalations to the SRT and to initiate proactive customer support. If `DISABLED`, the SRT will not proactively notify contacts about escalations or to initiate proactive customer support.

func (ProactiveEngagementStatus) ElementType 

func (ProactiveEngagementStatus) ElementType() reflect.Type

func (ProactiveEngagementStatus) ToProactiveEngagementStatusOutput 

func (e ProactiveEngagementStatus) ToProactiveEngagementStatusOutput() ProactiveEngagementStatusOutput

func (ProactiveEngagementStatus) ToProactiveEngagementStatusOutputWithContext 

func (e ProactiveEngagementStatus) ToProactiveEngagementStatusOutputWithContext(ctx context.Context) ProactiveEngagementStatusOutput

func (ProactiveEngagementStatus) ToProactiveEngagementStatusPtrOutput 

func (e ProactiveEngagementStatus) ToProactiveEngagementStatusPtrOutput() ProactiveEngagementStatusPtrOutput

func (ProactiveEngagementStatus) ToProactiveEngagementStatusPtrOutputWithContext 

func (e ProactiveEngagementStatus) ToProactiveEngagementStatusPtrOutputWithContext(ctx context.Context) ProactiveEngagementStatusPtrOutput

func (ProactiveEngagementStatus) ToStringOutput 

func (e ProactiveEngagementStatus) ToStringOutput() pulumi.StringOutput

func (ProactiveEngagementStatus) ToStringOutputWithContext 

func (e ProactiveEngagementStatus) ToStringOutputWithContext(ctx context.Context) pulumi.StringOutput

func (ProactiveEngagementStatus) ToStringPtrOutput 

func (e ProactiveEngagementStatus) ToStringPtrOutput() pulumi.StringPtrOutput

func (ProactiveEngagementStatus) ToStringPtrOutputWithContext 

func (e ProactiveEngagementStatus) ToStringPtrOutputWithContext(ctx context.Context) pulumi.StringPtrOutput

type ProactiveEngagementStatusInput 

type ProactiveEngagementStatusInput interface {
	pulumi.Input

	ToProactiveEngagementStatusOutput() ProactiveEngagementStatusOutput
	ToProactiveEngagementStatusOutputWithContext(context.Context) ProactiveEngagementStatusOutput
}

ProactiveEngagementStatusInput is an input type that accepts values of the ProactiveEngagementStatus enum A concrete instance of `ProactiveEngagementStatusInput` can be one of the following: 

ProactiveEngagementStatusEnabled
ProactiveEngagementStatusDisabled

type ProactiveEngagementStatusOutput 

type ProactiveEngagementStatusOutput struct{ *pulumi.OutputState }

func (ProactiveEngagementStatusOutput) ElementType 

func (ProactiveEngagementStatusOutput) ElementType() reflect.Type

func (ProactiveEngagementStatusOutput) ToProactiveEngagementStatusOutput 

func (o ProactiveEngagementStatusOutput) ToProactiveEngagementStatusOutput() ProactiveEngagementStatusOutput

func (ProactiveEngagementStatusOutput) ToProactiveEngagementStatusOutputWithContext 

func (o ProactiveEngagementStatusOutput) ToProactiveEngagementStatusOutputWithContext(ctx context.Context) ProactiveEngagementStatusOutput

func (ProactiveEngagementStatusOutput) ToProactiveEngagementStatusPtrOutput 

func (o ProactiveEngagementStatusOutput) ToProactiveEngagementStatusPtrOutput() ProactiveEngagementStatusPtrOutput

func (ProactiveEngagementStatusOutput) ToProactiveEngagementStatusPtrOutputWithContext 

func (o ProactiveEngagementStatusOutput) ToProactiveEngagementStatusPtrOutputWithContext(ctx context.Context) ProactiveEngagementStatusPtrOutput

func (ProactiveEngagementStatusOutput) ToStringOutput 

func (o ProactiveEngagementStatusOutput) ToStringOutput() pulumi.StringOutput

func (ProactiveEngagementStatusOutput) ToStringOutputWithContext 

func (o ProactiveEngagementStatusOutput) ToStringOutputWithContext(ctx context.Context) pulumi.StringOutput

func (ProactiveEngagementStatusOutput) ToStringPtrOutput 

func (o ProactiveEngagementStatusOutput) ToStringPtrOutput() pulumi.StringPtrOutput

func (ProactiveEngagementStatusOutput) ToStringPtrOutputWithContext 

func (o ProactiveEngagementStatusOutput) ToStringPtrOutputWithContext(ctx context.Context) pulumi.StringPtrOutput

type ProactiveEngagementStatusPtrInput 

type ProactiveEngagementStatusPtrInput interface {
	pulumi.Input

	ToProactiveEngagementStatusPtrOutput() ProactiveEngagementStatusPtrOutput
	ToProactiveEngagementStatusPtrOutputWithContext(context.Context) ProactiveEngagementStatusPtrOutput
}

func ProactiveEngagementStatusPtr 

func ProactiveEngagementStatusPtr(v string) ProactiveEngagementStatusPtrInput

type ProactiveEngagementStatusPtrOutput 

type ProactiveEngagementStatusPtrOutput struct{ *pulumi.OutputState }

func (ProactiveEngagementStatusPtrOutput) Elem 

func (o ProactiveEngagementStatusPtrOutput) Elem() ProactiveEngagementStatusOutput

func (ProactiveEngagementStatusPtrOutput) ElementType 

func (ProactiveEngagementStatusPtrOutput) ElementType() reflect.Type

func (ProactiveEngagementStatusPtrOutput) ToProactiveEngagementStatusPtrOutput 

func (o ProactiveEngagementStatusPtrOutput) ToProactiveEngagementStatusPtrOutput() ProactiveEngagementStatusPtrOutput

func (ProactiveEngagementStatusPtrOutput) ToProactiveEngagementStatusPtrOutputWithContext 

func (o ProactiveEngagementStatusPtrOutput) ToProactiveEngagementStatusPtrOutputWithContext(ctx context.Context) ProactiveEngagementStatusPtrOutput

func (ProactiveEngagementStatusPtrOutput) ToStringPtrOutput 

func (o ProactiveEngagementStatusPtrOutput) ToStringPtrOutput() pulumi.StringPtrOutput

func (ProactiveEngagementStatusPtrOutput) ToStringPtrOutputWithContext 

func (o ProactiveEngagementStatusPtrOutput) ToStringPtrOutputWithContext(ctx context.Context) pulumi.StringPtrOutput

type Protection 

type Protection struct {
	pulumi.CustomResourceState

	ApplicationLayerAutomaticResponseConfiguration ProtectionApplicationLayerAutomaticResponseConfigurationPtrOutput `pulumi:"applicationLayerAutomaticResponseConfiguration"`
	// The Amazon Resource Names (ARNs) of the health check to associate with the protection.
	HealthCheckArns pulumi.StringArrayOutput `pulumi:"healthCheckArns"`
	// Friendly name for the Protection.
	Name pulumi.StringOutput `pulumi:"name"`
	// The ARN (Amazon Resource Name) of the protection.
	ProtectionArn pulumi.StringOutput `pulumi:"protectionArn"`
	// The unique identifier (ID) of the protection.
	ProtectionId pulumi.StringOutput `pulumi:"protectionId"`
	// The ARN (Amazon Resource Name) of the resource to be protected.
	ResourceArn pulumi.StringOutput `pulumi:"resourceArn"`
	// One or more tag key-value pairs for the Protection object.
	Tags aws.TagArrayOutput `pulumi:"tags"`
}

Enables AWS Shield Advanced for a specific AWS resource. The resource can be an Amazon CloudFront distribution, Amazon Route 53 hosted zone, AWS Global Accelerator standard accelerator, Elastic IP Address, Application Load Balancer, or a Classic Load Balancer. You can protect Amazon EC2 instances and Network Load Balancers by association with protected Amazon EC2 Elastic IP addresses.

func GetProtection 

func GetProtection(ctx *pulumi.Context,
	name string, id pulumi.IDInput, state *ProtectionState, opts ...pulumi.ResourceOption) (*Protection, error)

GetProtection gets an existing Protection resource's state with the given name, ID, and optional state properties that are used to uniquely qualify the lookup (nil if not required).

func NewProtection 

func NewProtection(ctx *pulumi.Context,
	name string, args *ProtectionArgs, opts ...pulumi.ResourceOption) (*Protection, error)

NewProtection registers a new resource with the given unique name, arguments, and options.

func (*Protection) ElementType 

func (*Protection) ElementType() reflect.Type

func (*Protection) ToProtectionOutput 

func (i *Protection) ToProtectionOutput() ProtectionOutput

func (*Protection) ToProtectionOutputWithContext 

func (i *Protection) ToProtectionOutputWithContext(ctx context.Context) ProtectionOutput

type ProtectionApplicationLayerAutomaticResponseConfiguration 

type ProtectionApplicationLayerAutomaticResponseConfiguration struct {
	// Specifies the action setting that Shield Advanced should use in the AWS WAF rules that it creates on behalf of the protected resource in response to DDoS attacks. You specify this as part of the configuration for the automatic application layer DDoS mitigation feature, when you enable or update automatic mitigation. Shield Advanced creates the AWS WAF rules in a Shield Advanced-managed rule group, inside the web ACL that you have associated with the resource.
	Action interface{} `pulumi:"action"`
	// Indicates whether automatic application layer DDoS mitigation is enabled for the protection.
	Status ProtectionApplicationLayerAutomaticResponseConfigurationStatus `pulumi:"status"`
}

The automatic application layer DDoS mitigation settings for a Protection. This configuration determines whether Shield Advanced automatically manages rules in the web ACL in order to respond to application layer events that Shield Advanced determines to be DDoS attacks.

type ProtectionApplicationLayerAutomaticResponseConfigurationAction0Properties 

type ProtectionApplicationLayerAutomaticResponseConfigurationAction0Properties struct {
	// Specifies that Shield Advanced should configure its AWS WAF rules with the AWS WAF `Count` action.
	// You must specify exactly one action, either `Block` or `Count`.
	Count interface{} `pulumi:"count"`
}

Specifies the action setting that Shield Advanced should use in the AWS WAF rules that it creates on behalf of the protected resource in response to DDoS attacks. You specify this as part of the configuration for the automatic application layer DDoS mitigation feature, when you enable or update automatic mitigation. Shield Advanced creates the AWS WAF rules in a Shield Advanced-managed rule group, inside the web ACL that you have associated with the resource.

type ProtectionApplicationLayerAutomaticResponseConfigurationAction0PropertiesArgs added in v0.96.0 

type ProtectionApplicationLayerAutomaticResponseConfigurationAction0PropertiesArgs struct {
	// Specifies that Shield Advanced should configure its AWS WAF rules with the AWS WAF `Count` action.
	// You must specify exactly one action, either `Block` or `Count`.
	Count pulumi.Input `pulumi:"count"`
}

Specifies the action setting that Shield Advanced should use in the AWS WAF rules that it creates on behalf of the protected resource in response to DDoS attacks. You specify this as part of the configuration for the automatic application layer DDoS mitigation feature, when you enable or update automatic mitigation. Shield Advanced creates the AWS WAF rules in a Shield Advanced-managed rule group, inside the web ACL that you have associated with the resource.

func (ProtectionApplicationLayerAutomaticResponseConfigurationAction0PropertiesArgs) ElementType added in v0.96.0 

func (ProtectionApplicationLayerAutomaticResponseConfigurationAction0PropertiesArgs) ElementType() reflect.Type

func (ProtectionApplicationLayerAutomaticResponseConfigurationAction0PropertiesArgs) ToProtectionApplicationLayerAutomaticResponseConfigurationAction0PropertiesOutput added in v0.96.0 

func (i ProtectionApplicationLayerAutomaticResponseConfigurationAction0PropertiesArgs) ToProtectionApplicationLayerAutomaticResponseConfigurationAction0PropertiesOutput() ProtectionApplicationLayerAutomaticResponseConfigurationAction0PropertiesOutput

func (ProtectionApplicationLayerAutomaticResponseConfigurationAction0PropertiesArgs) ToProtectionApplicationLayerAutomaticResponseConfigurationAction0PropertiesOutputWithContext added in v0.96.0 

func (i ProtectionApplicationLayerAutomaticResponseConfigurationAction0PropertiesArgs) ToProtectionApplicationLayerAutomaticResponseConfigurationAction0PropertiesOutputWithContext(ctx context.Context) ProtectionApplicationLayerAutomaticResponseConfigurationAction0PropertiesOutput

func (ProtectionApplicationLayerAutomaticResponseConfigurationAction0PropertiesArgs) ToProtectionApplicationLayerAutomaticResponseConfigurationAction0PropertiesPtrOutput added in v0.96.0 

func (i ProtectionApplicationLayerAutomaticResponseConfigurationAction0PropertiesArgs) ToProtectionApplicationLayerAutomaticResponseConfigurationAction0PropertiesPtrOutput() ProtectionApplicationLayerAutomaticResponseConfigurationAction0PropertiesPtrOutput

func (ProtectionApplicationLayerAutomaticResponseConfigurationAction0PropertiesArgs) ToProtectionApplicationLayerAutomaticResponseConfigurationAction0PropertiesPtrOutputWithContext added in v0.96.0 

func (i ProtectionApplicationLayerAutomaticResponseConfigurationAction0PropertiesArgs) ToProtectionApplicationLayerAutomaticResponseConfigurationAction0PropertiesPtrOutputWithContext(ctx context.Context) ProtectionApplicationLayerAutomaticResponseConfigurationAction0PropertiesPtrOutput

type ProtectionApplicationLayerAutomaticResponseConfigurationAction0PropertiesInput added in v0.96.0 

type ProtectionApplicationLayerAutomaticResponseConfigurationAction0PropertiesInput interface {
	pulumi.Input

	ToProtectionApplicationLayerAutomaticResponseConfigurationAction0PropertiesOutput() ProtectionApplicationLayerAutomaticResponseConfigurationAction0PropertiesOutput
	ToProtectionApplicationLayerAutomaticResponseConfigurationAction0PropertiesOutputWithContext(context.Context) ProtectionApplicationLayerAutomaticResponseConfigurationAction0PropertiesOutput
}

ProtectionApplicationLayerAutomaticResponseConfigurationAction0PropertiesInput is an input type that accepts ProtectionApplicationLayerAutomaticResponseConfigurationAction0PropertiesArgs and ProtectionApplicationLayerAutomaticResponseConfigurationAction0PropertiesOutput values. You can construct a concrete instance of `ProtectionApplicationLayerAutomaticResponseConfigurationAction0PropertiesInput` via: 

ProtectionApplicationLayerAutomaticResponseConfigurationAction0PropertiesArgs{...}

type ProtectionApplicationLayerAutomaticResponseConfigurationAction0PropertiesOutput added in v0.96.0 

type ProtectionApplicationLayerAutomaticResponseConfigurationAction0PropertiesOutput struct{ *pulumi.OutputState }

Specifies the action setting that Shield Advanced should use in the AWS WAF rules that it creates on behalf of the protected resource in response to DDoS attacks. You specify this as part of the configuration for the automatic application layer DDoS mitigation feature, when you enable or update automatic mitigation. Shield Advanced creates the AWS WAF rules in a Shield Advanced-managed rule group, inside the web ACL that you have associated with the resource.

func (ProtectionApplicationLayerAutomaticResponseConfigurationAction0PropertiesOutput) Count added in v0.96.0 

func (o ProtectionApplicationLayerAutomaticResponseConfigurationAction0PropertiesOutput) Count() pulumi.AnyOutput

Specifies that Shield Advanced should configure its AWS WAF rules with the AWS WAF `Count` action. You must specify exactly one action, either `Block` or `Count`.

func (ProtectionApplicationLayerAutomaticResponseConfigurationAction0PropertiesOutput) ElementType added in v0.96.0 

func (ProtectionApplicationLayerAutomaticResponseConfigurationAction0PropertiesOutput) ElementType() reflect.Type

func (ProtectionApplicationLayerAutomaticResponseConfigurationAction0PropertiesOutput) ToProtectionApplicationLayerAutomaticResponseConfigurationAction0PropertiesOutput added in v0.96.0 

func (o ProtectionApplicationLayerAutomaticResponseConfigurationAction0PropertiesOutput) ToProtectionApplicationLayerAutomaticResponseConfigurationAction0PropertiesOutput() ProtectionApplicationLayerAutomaticResponseConfigurationAction0PropertiesOutput

func (ProtectionApplicationLayerAutomaticResponseConfigurationAction0PropertiesOutput) ToProtectionApplicationLayerAutomaticResponseConfigurationAction0PropertiesOutputWithContext added in v0.96.0 

func (o ProtectionApplicationLayerAutomaticResponseConfigurationAction0PropertiesOutput) ToProtectionApplicationLayerAutomaticResponseConfigurationAction0PropertiesOutputWithContext(ctx context.Context) ProtectionApplicationLayerAutomaticResponseConfigurationAction0PropertiesOutput

func (ProtectionApplicationLayerAutomaticResponseConfigurationAction0PropertiesOutput) ToProtectionApplicationLayerAutomaticResponseConfigurationAction0PropertiesPtrOutput added in v0.96.0 

func (o ProtectionApplicationLayerAutomaticResponseConfigurationAction0PropertiesOutput) ToProtectionApplicationLayerAutomaticResponseConfigurationAction0PropertiesPtrOutput() ProtectionApplicationLayerAutomaticResponseConfigurationAction0PropertiesPtrOutput

func (ProtectionApplicationLayerAutomaticResponseConfigurationAction0PropertiesOutput) ToProtectionApplicationLayerAutomaticResponseConfigurationAction0PropertiesPtrOutputWithContext added in v0.96.0 

func (o ProtectionApplicationLayerAutomaticResponseConfigurationAction0PropertiesOutput) ToProtectionApplicationLayerAutomaticResponseConfigurationAction0PropertiesPtrOutputWithContext(ctx context.Context) ProtectionApplicationLayerAutomaticResponseConfigurationAction0PropertiesPtrOutput

type ProtectionApplicationLayerAutomaticResponseConfigurationAction0PropertiesPtrInput added in v0.96.0 

type ProtectionApplicationLayerAutomaticResponseConfigurationAction0PropertiesPtrInput interface {
	pulumi.Input

	ToProtectionApplicationLayerAutomaticResponseConfigurationAction0PropertiesPtrOutput() ProtectionApplicationLayerAutomaticResponseConfigurationAction0PropertiesPtrOutput
	ToProtectionApplicationLayerAutomaticResponseConfigurationAction0PropertiesPtrOutputWithContext(context.Context) ProtectionApplicationLayerAutomaticResponseConfigurationAction0PropertiesPtrOutput
}

ProtectionApplicationLayerAutomaticResponseConfigurationAction0PropertiesPtrInput is an input type that accepts ProtectionApplicationLayerAutomaticResponseConfigurationAction0PropertiesArgs, ProtectionApplicationLayerAutomaticResponseConfigurationAction0PropertiesPtr and ProtectionApplicationLayerAutomaticResponseConfigurationAction0PropertiesPtrOutput values. You can construct a concrete instance of `ProtectionApplicationLayerAutomaticResponseConfigurationAction0PropertiesPtrInput` via: 

        ProtectionApplicationLayerAutomaticResponseConfigurationAction0PropertiesArgs{...}

or:

        nil

func ProtectionApplicationLayerAutomaticResponseConfigurationAction0PropertiesPtr added in v0.96.0 

func ProtectionApplicationLayerAutomaticResponseConfigurationAction0PropertiesPtr(v *ProtectionApplicationLayerAutomaticResponseConfigurationAction0PropertiesArgs) ProtectionApplicationLayerAutomaticResponseConfigurationAction0PropertiesPtrInput

type ProtectionApplicationLayerAutomaticResponseConfigurationAction0PropertiesPtrOutput added in v0.96.0 

type ProtectionApplicationLayerAutomaticResponseConfigurationAction0PropertiesPtrOutput struct{ *pulumi.OutputState }

func (ProtectionApplicationLayerAutomaticResponseConfigurationAction0PropertiesPtrOutput) Count added in v0.96.0 

func (o ProtectionApplicationLayerAutomaticResponseConfigurationAction0PropertiesPtrOutput) Count() pulumi.AnyOutput

Specifies that Shield Advanced should configure its AWS WAF rules with the AWS WAF `Count` action. You must specify exactly one action, either `Block` or `Count`.

func (ProtectionApplicationLayerAutomaticResponseConfigurationAction0PropertiesPtrOutput) Elem added in v0.96.0 

func (o ProtectionApplicationLayerAutomaticResponseConfigurationAction0PropertiesPtrOutput) Elem() ProtectionApplicationLayerAutomaticResponseConfigurationAction0PropertiesOutput

func (ProtectionApplicationLayerAutomaticResponseConfigurationAction0PropertiesPtrOutput) ElementType added in v0.96.0 

func (ProtectionApplicationLayerAutomaticResponseConfigurationAction0PropertiesPtrOutput) ElementType() reflect.Type

func (ProtectionApplicationLayerAutomaticResponseConfigurationAction0PropertiesPtrOutput) ToProtectionApplicationLayerAutomaticResponseConfigurationAction0PropertiesPtrOutput added in v0.96.0 

func (o ProtectionApplicationLayerAutomaticResponseConfigurationAction0PropertiesPtrOutput) ToProtectionApplicationLayerAutomaticResponseConfigurationAction0PropertiesPtrOutput() ProtectionApplicationLayerAutomaticResponseConfigurationAction0PropertiesPtrOutput

func (ProtectionApplicationLayerAutomaticResponseConfigurationAction0PropertiesPtrOutput) ToProtectionApplicationLayerAutomaticResponseConfigurationAction0PropertiesPtrOutputWithContext added in v0.96.0 

func (o ProtectionApplicationLayerAutomaticResponseConfigurationAction0PropertiesPtrOutput) ToProtectionApplicationLayerAutomaticResponseConfigurationAction0PropertiesPtrOutputWithContext(ctx context.Context) ProtectionApplicationLayerAutomaticResponseConfigurationAction0PropertiesPtrOutput

type ProtectionApplicationLayerAutomaticResponseConfigurationAction1Properties 

type ProtectionApplicationLayerAutomaticResponseConfigurationAction1Properties struct {
	// Specifies that Shield Advanced should configure its AWS WAF rules with the AWS WAF `Block` action.
	// You must specify exactly one action, either `Block` or `Count`.
	Block interface{} `pulumi:"block"`
}

Specifies the action setting that Shield Advanced should use in the AWS WAF rules that it creates on behalf of the protected resource in response to DDoS attacks. You specify this as part of the configuration for the automatic application layer DDoS mitigation feature, when you enable or update automatic mitigation. Shield Advanced creates the AWS WAF rules in a Shield Advanced-managed rule group, inside the web ACL that you have associated with the resource.

type ProtectionApplicationLayerAutomaticResponseConfigurationAction1PropertiesArgs added in v0.96.0 

type ProtectionApplicationLayerAutomaticResponseConfigurationAction1PropertiesArgs struct {
	// Specifies that Shield Advanced should configure its AWS WAF rules with the AWS WAF `Block` action.
	// You must specify exactly one action, either `Block` or `Count`.
	Block pulumi.Input `pulumi:"block"`
}

Specifies the action setting that Shield Advanced should use in the AWS WAF rules that it creates on behalf of the protected resource in response to DDoS attacks. You specify this as part of the configuration for the automatic application layer DDoS mitigation feature, when you enable or update automatic mitigation. Shield Advanced creates the AWS WAF rules in a Shield Advanced-managed rule group, inside the web ACL that you have associated with the resource.

func (ProtectionApplicationLayerAutomaticResponseConfigurationAction1PropertiesArgs) ElementType added in v0.96.0 

func (ProtectionApplicationLayerAutomaticResponseConfigurationAction1PropertiesArgs) ElementType() reflect.Type

func (ProtectionApplicationLayerAutomaticResponseConfigurationAction1PropertiesArgs) ToProtectionApplicationLayerAutomaticResponseConfigurationAction1PropertiesOutput added in v0.96.0 

func (i ProtectionApplicationLayerAutomaticResponseConfigurationAction1PropertiesArgs) ToProtectionApplicationLayerAutomaticResponseConfigurationAction1PropertiesOutput() ProtectionApplicationLayerAutomaticResponseConfigurationAction1PropertiesOutput

func (ProtectionApplicationLayerAutomaticResponseConfigurationAction1PropertiesArgs) ToProtectionApplicationLayerAutomaticResponseConfigurationAction1PropertiesOutputWithContext added in v0.96.0 

func (i ProtectionApplicationLayerAutomaticResponseConfigurationAction1PropertiesArgs) ToProtectionApplicationLayerAutomaticResponseConfigurationAction1PropertiesOutputWithContext(ctx context.Context) ProtectionApplicationLayerAutomaticResponseConfigurationAction1PropertiesOutput

func (ProtectionApplicationLayerAutomaticResponseConfigurationAction1PropertiesArgs) ToProtectionApplicationLayerAutomaticResponseConfigurationAction1PropertiesPtrOutput added in v0.96.0 

func (i ProtectionApplicationLayerAutomaticResponseConfigurationAction1PropertiesArgs) ToProtectionApplicationLayerAutomaticResponseConfigurationAction1PropertiesPtrOutput() ProtectionApplicationLayerAutomaticResponseConfigurationAction1PropertiesPtrOutput

func (ProtectionApplicationLayerAutomaticResponseConfigurationAction1PropertiesArgs) ToProtectionApplicationLayerAutomaticResponseConfigurationAction1PropertiesPtrOutputWithContext added in v0.96.0 

func (i ProtectionApplicationLayerAutomaticResponseConfigurationAction1PropertiesArgs) ToProtectionApplicationLayerAutomaticResponseConfigurationAction1PropertiesPtrOutputWithContext(ctx context.Context) ProtectionApplicationLayerAutomaticResponseConfigurationAction1PropertiesPtrOutput

type ProtectionApplicationLayerAutomaticResponseConfigurationAction1PropertiesInput added in v0.96.0 

type ProtectionApplicationLayerAutomaticResponseConfigurationAction1PropertiesInput interface {
	pulumi.Input

	ToProtectionApplicationLayerAutomaticResponseConfigurationAction1PropertiesOutput() ProtectionApplicationLayerAutomaticResponseConfigurationAction1PropertiesOutput
	ToProtectionApplicationLayerAutomaticResponseConfigurationAction1PropertiesOutputWithContext(context.Context) ProtectionApplicationLayerAutomaticResponseConfigurationAction1PropertiesOutput
}

ProtectionApplicationLayerAutomaticResponseConfigurationAction1PropertiesInput is an input type that accepts ProtectionApplicationLayerAutomaticResponseConfigurationAction1PropertiesArgs and ProtectionApplicationLayerAutomaticResponseConfigurationAction1PropertiesOutput values. You can construct a concrete instance of `ProtectionApplicationLayerAutomaticResponseConfigurationAction1PropertiesInput` via: 

ProtectionApplicationLayerAutomaticResponseConfigurationAction1PropertiesArgs{...}

type ProtectionApplicationLayerAutomaticResponseConfigurationAction1PropertiesOutput added in v0.96.0 

type ProtectionApplicationLayerAutomaticResponseConfigurationAction1PropertiesOutput struct{ *pulumi.OutputState }

Specifies the action setting that Shield Advanced should use in the AWS WAF rules that it creates on behalf of the protected resource in response to DDoS attacks. You specify this as part of the configuration for the automatic application layer DDoS mitigation feature, when you enable or update automatic mitigation. Shield Advanced creates the AWS WAF rules in a Shield Advanced-managed rule group, inside the web ACL that you have associated with the resource.

func (ProtectionApplicationLayerAutomaticResponseConfigurationAction1PropertiesOutput) Block added in v0.96.0 

func (o ProtectionApplicationLayerAutomaticResponseConfigurationAction1PropertiesOutput) Block() pulumi.AnyOutput

Specifies that Shield Advanced should configure its AWS WAF rules with the AWS WAF `Block` action. You must specify exactly one action, either `Block` or `Count`.

func (ProtectionApplicationLayerAutomaticResponseConfigurationAction1PropertiesOutput) ElementType added in v0.96.0 

func (ProtectionApplicationLayerAutomaticResponseConfigurationAction1PropertiesOutput) ElementType() reflect.Type

func (ProtectionApplicationLayerAutomaticResponseConfigurationAction1PropertiesOutput) ToProtectionApplicationLayerAutomaticResponseConfigurationAction1PropertiesOutput added in v0.96.0 

func (o ProtectionApplicationLayerAutomaticResponseConfigurationAction1PropertiesOutput) ToProtectionApplicationLayerAutomaticResponseConfigurationAction1PropertiesOutput() ProtectionApplicationLayerAutomaticResponseConfigurationAction1PropertiesOutput

func (ProtectionApplicationLayerAutomaticResponseConfigurationAction1PropertiesOutput) ToProtectionApplicationLayerAutomaticResponseConfigurationAction1PropertiesOutputWithContext added in v0.96.0 

func (o ProtectionApplicationLayerAutomaticResponseConfigurationAction1PropertiesOutput) ToProtectionApplicationLayerAutomaticResponseConfigurationAction1PropertiesOutputWithContext(ctx context.Context) ProtectionApplicationLayerAutomaticResponseConfigurationAction1PropertiesOutput

func (ProtectionApplicationLayerAutomaticResponseConfigurationAction1PropertiesOutput) ToProtectionApplicationLayerAutomaticResponseConfigurationAction1PropertiesPtrOutput added in v0.96.0 

func (o ProtectionApplicationLayerAutomaticResponseConfigurationAction1PropertiesOutput) ToProtectionApplicationLayerAutomaticResponseConfigurationAction1PropertiesPtrOutput() ProtectionApplicationLayerAutomaticResponseConfigurationAction1PropertiesPtrOutput

func (ProtectionApplicationLayerAutomaticResponseConfigurationAction1PropertiesOutput) ToProtectionApplicationLayerAutomaticResponseConfigurationAction1PropertiesPtrOutputWithContext added in v0.96.0 

func (o ProtectionApplicationLayerAutomaticResponseConfigurationAction1PropertiesOutput) ToProtectionApplicationLayerAutomaticResponseConfigurationAction1PropertiesPtrOutputWithContext(ctx context.Context) ProtectionApplicationLayerAutomaticResponseConfigurationAction1PropertiesPtrOutput

type ProtectionApplicationLayerAutomaticResponseConfigurationAction1PropertiesPtrInput added in v0.96.0 

type ProtectionApplicationLayerAutomaticResponseConfigurationAction1PropertiesPtrInput interface {
	pulumi.Input

	ToProtectionApplicationLayerAutomaticResponseConfigurationAction1PropertiesPtrOutput() ProtectionApplicationLayerAutomaticResponseConfigurationAction1PropertiesPtrOutput
	ToProtectionApplicationLayerAutomaticResponseConfigurationAction1PropertiesPtrOutputWithContext(context.Context) ProtectionApplicationLayerAutomaticResponseConfigurationAction1PropertiesPtrOutput
}

ProtectionApplicationLayerAutomaticResponseConfigurationAction1PropertiesPtrInput is an input type that accepts ProtectionApplicationLayerAutomaticResponseConfigurationAction1PropertiesArgs, ProtectionApplicationLayerAutomaticResponseConfigurationAction1PropertiesPtr and ProtectionApplicationLayerAutomaticResponseConfigurationAction1PropertiesPtrOutput values. You can construct a concrete instance of `ProtectionApplicationLayerAutomaticResponseConfigurationAction1PropertiesPtrInput` via: 

        ProtectionApplicationLayerAutomaticResponseConfigurationAction1PropertiesArgs{...}

or:

        nil

func ProtectionApplicationLayerAutomaticResponseConfigurationAction1PropertiesPtr added in v0.96.0 

func ProtectionApplicationLayerAutomaticResponseConfigurationAction1PropertiesPtr(v *ProtectionApplicationLayerAutomaticResponseConfigurationAction1PropertiesArgs) ProtectionApplicationLayerAutomaticResponseConfigurationAction1PropertiesPtrInput

type ProtectionApplicationLayerAutomaticResponseConfigurationAction1PropertiesPtrOutput added in v0.96.0 

type ProtectionApplicationLayerAutomaticResponseConfigurationAction1PropertiesPtrOutput struct{ *pulumi.OutputState }

func (ProtectionApplicationLayerAutomaticResponseConfigurationAction1PropertiesPtrOutput) Block added in v0.96.0 

func (o ProtectionApplicationLayerAutomaticResponseConfigurationAction1PropertiesPtrOutput) Block() pulumi.AnyOutput

Specifies that Shield Advanced should configure its AWS WAF rules with the AWS WAF `Block` action. You must specify exactly one action, either `Block` or `Count`.

func (ProtectionApplicationLayerAutomaticResponseConfigurationAction1PropertiesPtrOutput) Elem added in v0.96.0 

func (o ProtectionApplicationLayerAutomaticResponseConfigurationAction1PropertiesPtrOutput) Elem() ProtectionApplicationLayerAutomaticResponseConfigurationAction1PropertiesOutput

func (ProtectionApplicationLayerAutomaticResponseConfigurationAction1PropertiesPtrOutput) ElementType added in v0.96.0 

func (ProtectionApplicationLayerAutomaticResponseConfigurationAction1PropertiesPtrOutput) ElementType() reflect.Type

func (ProtectionApplicationLayerAutomaticResponseConfigurationAction1PropertiesPtrOutput) ToProtectionApplicationLayerAutomaticResponseConfigurationAction1PropertiesPtrOutput added in v0.96.0 

func (o ProtectionApplicationLayerAutomaticResponseConfigurationAction1PropertiesPtrOutput) ToProtectionApplicationLayerAutomaticResponseConfigurationAction1PropertiesPtrOutput() ProtectionApplicationLayerAutomaticResponseConfigurationAction1PropertiesPtrOutput

func (ProtectionApplicationLayerAutomaticResponseConfigurationAction1PropertiesPtrOutput) ToProtectionApplicationLayerAutomaticResponseConfigurationAction1PropertiesPtrOutputWithContext added in v0.96.0 

func (o ProtectionApplicationLayerAutomaticResponseConfigurationAction1PropertiesPtrOutput) ToProtectionApplicationLayerAutomaticResponseConfigurationAction1PropertiesPtrOutputWithContext(ctx context.Context) ProtectionApplicationLayerAutomaticResponseConfigurationAction1PropertiesPtrOutput

type ProtectionApplicationLayerAutomaticResponseConfigurationArgs 

type ProtectionApplicationLayerAutomaticResponseConfigurationArgs struct {
	// Specifies the action setting that Shield Advanced should use in the AWS WAF rules that it creates on behalf of the protected resource in response to DDoS attacks. You specify this as part of the configuration for the automatic application layer DDoS mitigation feature, when you enable or update automatic mitigation. Shield Advanced creates the AWS WAF rules in a Shield Advanced-managed rule group, inside the web ACL that you have associated with the resource.
	Action pulumi.Input `pulumi:"action"`
	// Indicates whether automatic application layer DDoS mitigation is enabled for the protection.
	Status ProtectionApplicationLayerAutomaticResponseConfigurationStatusInput `pulumi:"status"`
}

The automatic application layer DDoS mitigation settings for a Protection. This configuration determines whether Shield Advanced automatically manages rules in the web ACL in order to respond to application layer events that Shield Advanced determines to be DDoS attacks.

func (ProtectionApplicationLayerAutomaticResponseConfigurationArgs) ElementType 

func (ProtectionApplicationLayerAutomaticResponseConfigurationArgs) ElementType() reflect.Type

func (ProtectionApplicationLayerAutomaticResponseConfigurationArgs) ToProtectionApplicationLayerAutomaticResponseConfigurationOutput 

func (i ProtectionApplicationLayerAutomaticResponseConfigurationArgs) ToProtectionApplicationLayerAutomaticResponseConfigurationOutput() ProtectionApplicationLayerAutomaticResponseConfigurationOutput

func (ProtectionApplicationLayerAutomaticResponseConfigurationArgs) ToProtectionApplicationLayerAutomaticResponseConfigurationOutputWithContext 

func (i ProtectionApplicationLayerAutomaticResponseConfigurationArgs) ToProtectionApplicationLayerAutomaticResponseConfigurationOutputWithContext(ctx context.Context) ProtectionApplicationLayerAutomaticResponseConfigurationOutput

func (ProtectionApplicationLayerAutomaticResponseConfigurationArgs) ToProtectionApplicationLayerAutomaticResponseConfigurationPtrOutput 

func (i ProtectionApplicationLayerAutomaticResponseConfigurationArgs) ToProtectionApplicationLayerAutomaticResponseConfigurationPtrOutput() ProtectionApplicationLayerAutomaticResponseConfigurationPtrOutput

func (ProtectionApplicationLayerAutomaticResponseConfigurationArgs) ToProtectionApplicationLayerAutomaticResponseConfigurationPtrOutputWithContext 

func (i ProtectionApplicationLayerAutomaticResponseConfigurationArgs) ToProtectionApplicationLayerAutomaticResponseConfigurationPtrOutputWithContext(ctx context.Context) ProtectionApplicationLayerAutomaticResponseConfigurationPtrOutput

type ProtectionApplicationLayerAutomaticResponseConfigurationInput 

type ProtectionApplicationLayerAutomaticResponseConfigurationInput interface {
	pulumi.Input

	ToProtectionApplicationLayerAutomaticResponseConfigurationOutput() ProtectionApplicationLayerAutomaticResponseConfigurationOutput
	ToProtectionApplicationLayerAutomaticResponseConfigurationOutputWithContext(context.Context) ProtectionApplicationLayerAutomaticResponseConfigurationOutput
}

ProtectionApplicationLayerAutomaticResponseConfigurationInput is an input type that accepts ProtectionApplicationLayerAutomaticResponseConfigurationArgs and ProtectionApplicationLayerAutomaticResponseConfigurationOutput values. You can construct a concrete instance of `ProtectionApplicationLayerAutomaticResponseConfigurationInput` via: 

ProtectionApplicationLayerAutomaticResponseConfigurationArgs{...}

type ProtectionApplicationLayerAutomaticResponseConfigurationOutput 

type ProtectionApplicationLayerAutomaticResponseConfigurationOutput struct{ *pulumi.OutputState }

The automatic application layer DDoS mitigation settings for a Protection. This configuration determines whether Shield Advanced automatically manages rules in the web ACL in order to respond to application layer events that Shield Advanced determines to be DDoS attacks.

func (ProtectionApplicationLayerAutomaticResponseConfigurationOutput) Action 

func (o ProtectionApplicationLayerAutomaticResponseConfigurationOutput) Action() pulumi.AnyOutput

Specifies the action setting that Shield Advanced should use in the AWS WAF rules that it creates on behalf of the protected resource in response to DDoS attacks. You specify this as part of the configuration for the automatic application layer DDoS mitigation feature, when you enable or update automatic mitigation. Shield Advanced creates the AWS WAF rules in a Shield Advanced-managed rule group, inside the web ACL that you have associated with the resource.

func (ProtectionApplicationLayerAutomaticResponseConfigurationOutput) ElementType 

func (ProtectionApplicationLayerAutomaticResponseConfigurationOutput) ElementType() reflect.Type

func (ProtectionApplicationLayerAutomaticResponseConfigurationOutput) Status 

func (o ProtectionApplicationLayerAutomaticResponseConfigurationOutput) Status() ProtectionApplicationLayerAutomaticResponseConfigurationStatusOutput

Indicates whether automatic application layer DDoS mitigation is enabled for the protection.

func (ProtectionApplicationLayerAutomaticResponseConfigurationOutput) ToProtectionApplicationLayerAutomaticResponseConfigurationOutput 

func (o ProtectionApplicationLayerAutomaticResponseConfigurationOutput) ToProtectionApplicationLayerAutomaticResponseConfigurationOutput() ProtectionApplicationLayerAutomaticResponseConfigurationOutput

func (ProtectionApplicationLayerAutomaticResponseConfigurationOutput) ToProtectionApplicationLayerAutomaticResponseConfigurationOutputWithContext 

func (o ProtectionApplicationLayerAutomaticResponseConfigurationOutput) ToProtectionApplicationLayerAutomaticResponseConfigurationOutputWithContext(ctx context.Context) ProtectionApplicationLayerAutomaticResponseConfigurationOutput

func (ProtectionApplicationLayerAutomaticResponseConfigurationOutput) ToProtectionApplicationLayerAutomaticResponseConfigurationPtrOutput 

func (o ProtectionApplicationLayerAutomaticResponseConfigurationOutput) ToProtectionApplicationLayerAutomaticResponseConfigurationPtrOutput() ProtectionApplicationLayerAutomaticResponseConfigurationPtrOutput

func (ProtectionApplicationLayerAutomaticResponseConfigurationOutput) ToProtectionApplicationLayerAutomaticResponseConfigurationPtrOutputWithContext 

func (o ProtectionApplicationLayerAutomaticResponseConfigurationOutput) ToProtectionApplicationLayerAutomaticResponseConfigurationPtrOutputWithContext(ctx context.Context) ProtectionApplicationLayerAutomaticResponseConfigurationPtrOutput

type ProtectionApplicationLayerAutomaticResponseConfigurationPtrInput 

type ProtectionApplicationLayerAutomaticResponseConfigurationPtrInput interface {
	pulumi.Input

	ToProtectionApplicationLayerAutomaticResponseConfigurationPtrOutput() ProtectionApplicationLayerAutomaticResponseConfigurationPtrOutput
	ToProtectionApplicationLayerAutomaticResponseConfigurationPtrOutputWithContext(context.Context) ProtectionApplicationLayerAutomaticResponseConfigurationPtrOutput
}

ProtectionApplicationLayerAutomaticResponseConfigurationPtrInput is an input type that accepts ProtectionApplicationLayerAutomaticResponseConfigurationArgs, ProtectionApplicationLayerAutomaticResponseConfigurationPtr and ProtectionApplicationLayerAutomaticResponseConfigurationPtrOutput values. You can construct a concrete instance of `ProtectionApplicationLayerAutomaticResponseConfigurationPtrInput` via: 

        ProtectionApplicationLayerAutomaticResponseConfigurationArgs{...}

or:

        nil

func ProtectionApplicationLayerAutomaticResponseConfigurationPtr 

func ProtectionApplicationLayerAutomaticResponseConfigurationPtr(v *ProtectionApplicationLayerAutomaticResponseConfigurationArgs) ProtectionApplicationLayerAutomaticResponseConfigurationPtrInput

type ProtectionApplicationLayerAutomaticResponseConfigurationPtrOutput 

type ProtectionApplicationLayerAutomaticResponseConfigurationPtrOutput struct{ *pulumi.OutputState }

func (ProtectionApplicationLayerAutomaticResponseConfigurationPtrOutput) Action 

func (o ProtectionApplicationLayerAutomaticResponseConfigurationPtrOutput) Action() pulumi.AnyOutput

Specifies the action setting that Shield Advanced should use in the AWS WAF rules that it creates on behalf of the protected resource in response to DDoS attacks. You specify this as part of the configuration for the automatic application layer DDoS mitigation feature, when you enable or update automatic mitigation. Shield Advanced creates the AWS WAF rules in a Shield Advanced-managed rule group, inside the web ACL that you have associated with the resource.

func (ProtectionApplicationLayerAutomaticResponseConfigurationPtrOutput) Elem 

func (o ProtectionApplicationLayerAutomaticResponseConfigurationPtrOutput) Elem() ProtectionApplicationLayerAutomaticResponseConfigurationOutput

func (ProtectionApplicationLayerAutomaticResponseConfigurationPtrOutput) ElementType 

func (ProtectionApplicationLayerAutomaticResponseConfigurationPtrOutput) ElementType() reflect.Type

func (ProtectionApplicationLayerAutomaticResponseConfigurationPtrOutput) Status 

func (o ProtectionApplicationLayerAutomaticResponseConfigurationPtrOutput) Status() ProtectionApplicationLayerAutomaticResponseConfigurationStatusPtrOutput

Indicates whether automatic application layer DDoS mitigation is enabled for the protection.

func (ProtectionApplicationLayerAutomaticResponseConfigurationPtrOutput) ToProtectionApplicationLayerAutomaticResponseConfigurationPtrOutput 

func (o ProtectionApplicationLayerAutomaticResponseConfigurationPtrOutput) ToProtectionApplicationLayerAutomaticResponseConfigurationPtrOutput() ProtectionApplicationLayerAutomaticResponseConfigurationPtrOutput

func (ProtectionApplicationLayerAutomaticResponseConfigurationPtrOutput) ToProtectionApplicationLayerAutomaticResponseConfigurationPtrOutputWithContext 

func (o ProtectionApplicationLayerAutomaticResponseConfigurationPtrOutput) ToProtectionApplicationLayerAutomaticResponseConfigurationPtrOutputWithContext(ctx context.Context) ProtectionApplicationLayerAutomaticResponseConfigurationPtrOutput

type ProtectionApplicationLayerAutomaticResponseConfigurationStatus 

type ProtectionApplicationLayerAutomaticResponseConfigurationStatus string

Indicates whether automatic application layer DDoS mitigation is enabled for the protection.

func (ProtectionApplicationLayerAutomaticResponseConfigurationStatus) ElementType 

func (ProtectionApplicationLayerAutomaticResponseConfigurationStatus) ElementType() reflect.Type

func (ProtectionApplicationLayerAutomaticResponseConfigurationStatus) ToProtectionApplicationLayerAutomaticResponseConfigurationStatusOutput 

func (e ProtectionApplicationLayerAutomaticResponseConfigurationStatus) ToProtectionApplicationLayerAutomaticResponseConfigurationStatusOutput() ProtectionApplicationLayerAutomaticResponseConfigurationStatusOutput

func (ProtectionApplicationLayerAutomaticResponseConfigurationStatus) ToProtectionApplicationLayerAutomaticResponseConfigurationStatusOutputWithContext 

func (e ProtectionApplicationLayerAutomaticResponseConfigurationStatus) ToProtectionApplicationLayerAutomaticResponseConfigurationStatusOutputWithContext(ctx context.Context) ProtectionApplicationLayerAutomaticResponseConfigurationStatusOutput

func (ProtectionApplicationLayerAutomaticResponseConfigurationStatus) ToProtectionApplicationLayerAutomaticResponseConfigurationStatusPtrOutput 

func (e ProtectionApplicationLayerAutomaticResponseConfigurationStatus) ToProtectionApplicationLayerAutomaticResponseConfigurationStatusPtrOutput() ProtectionApplicationLayerAutomaticResponseConfigurationStatusPtrOutput

func (ProtectionApplicationLayerAutomaticResponseConfigurationStatus) ToProtectionApplicationLayerAutomaticResponseConfigurationStatusPtrOutputWithContext 

func (e ProtectionApplicationLayerAutomaticResponseConfigurationStatus) ToProtectionApplicationLayerAutomaticResponseConfigurationStatusPtrOutputWithContext(ctx context.Context) ProtectionApplicationLayerAutomaticResponseConfigurationStatusPtrOutput

func (ProtectionApplicationLayerAutomaticResponseConfigurationStatus) ToStringOutput 

func (e ProtectionApplicationLayerAutomaticResponseConfigurationStatus) ToStringOutput() pulumi.StringOutput

func (ProtectionApplicationLayerAutomaticResponseConfigurationStatus) ToStringOutputWithContext 

func (e ProtectionApplicationLayerAutomaticResponseConfigurationStatus) ToStringOutputWithContext(ctx context.Context) pulumi.StringOutput

func (ProtectionApplicationLayerAutomaticResponseConfigurationStatus) ToStringPtrOutput 

func (e ProtectionApplicationLayerAutomaticResponseConfigurationStatus) ToStringPtrOutput() pulumi.StringPtrOutput

func (ProtectionApplicationLayerAutomaticResponseConfigurationStatus) ToStringPtrOutputWithContext 

func (e ProtectionApplicationLayerAutomaticResponseConfigurationStatus) ToStringPtrOutputWithContext(ctx context.Context) pulumi.StringPtrOutput

type ProtectionApplicationLayerAutomaticResponseConfigurationStatusInput 

type ProtectionApplicationLayerAutomaticResponseConfigurationStatusInput interface {
	pulumi.Input

	ToProtectionApplicationLayerAutomaticResponseConfigurationStatusOutput() ProtectionApplicationLayerAutomaticResponseConfigurationStatusOutput
	ToProtectionApplicationLayerAutomaticResponseConfigurationStatusOutputWithContext(context.Context) ProtectionApplicationLayerAutomaticResponseConfigurationStatusOutput
}

ProtectionApplicationLayerAutomaticResponseConfigurationStatusInput is an input type that accepts values of the ProtectionApplicationLayerAutomaticResponseConfigurationStatus enum A concrete instance of `ProtectionApplicationLayerAutomaticResponseConfigurationStatusInput` can be one of the following: 

ProtectionApplicationLayerAutomaticResponseConfigurationStatusEnabled
ProtectionApplicationLayerAutomaticResponseConfigurationStatusDisabled

type ProtectionApplicationLayerAutomaticResponseConfigurationStatusOutput 

type ProtectionApplicationLayerAutomaticResponseConfigurationStatusOutput struct{ *pulumi.OutputState }

func (ProtectionApplicationLayerAutomaticResponseConfigurationStatusOutput) ElementType 

func (ProtectionApplicationLayerAutomaticResponseConfigurationStatusOutput) ElementType() reflect.Type

func (ProtectionApplicationLayerAutomaticResponseConfigurationStatusOutput) ToProtectionApplicationLayerAutomaticResponseConfigurationStatusOutput 

func (o ProtectionApplicationLayerAutomaticResponseConfigurationStatusOutput) ToProtectionApplicationLayerAutomaticResponseConfigurationStatusOutput() ProtectionApplicationLayerAutomaticResponseConfigurationStatusOutput

func (ProtectionApplicationLayerAutomaticResponseConfigurationStatusOutput) ToProtectionApplicationLayerAutomaticResponseConfigurationStatusOutputWithContext 

func (o ProtectionApplicationLayerAutomaticResponseConfigurationStatusOutput) ToProtectionApplicationLayerAutomaticResponseConfigurationStatusOutputWithContext(ctx context.Context) ProtectionApplicationLayerAutomaticResponseConfigurationStatusOutput

func (ProtectionApplicationLayerAutomaticResponseConfigurationStatusOutput) ToProtectionApplicationLayerAutomaticResponseConfigurationStatusPtrOutput 

func (o ProtectionApplicationLayerAutomaticResponseConfigurationStatusOutput) ToProtectionApplicationLayerAutomaticResponseConfigurationStatusPtrOutput() ProtectionApplicationLayerAutomaticResponseConfigurationStatusPtrOutput

func (ProtectionApplicationLayerAutomaticResponseConfigurationStatusOutput) ToProtectionApplicationLayerAutomaticResponseConfigurationStatusPtrOutputWithContext 

func (o ProtectionApplicationLayerAutomaticResponseConfigurationStatusOutput) ToProtectionApplicationLayerAutomaticResponseConfigurationStatusPtrOutputWithContext(ctx context.Context) ProtectionApplicationLayerAutomaticResponseConfigurationStatusPtrOutput

func (ProtectionApplicationLayerAutomaticResponseConfigurationStatusOutput) ToStringOutput 

func (o ProtectionApplicationLayerAutomaticResponseConfigurationStatusOutput) ToStringOutput() pulumi.StringOutput

func (ProtectionApplicationLayerAutomaticResponseConfigurationStatusOutput) ToStringOutputWithContext 

func (o ProtectionApplicationLayerAutomaticResponseConfigurationStatusOutput) ToStringOutputWithContext(ctx context.Context) pulumi.StringOutput

func (ProtectionApplicationLayerAutomaticResponseConfigurationStatusOutput) ToStringPtrOutput 

func (o ProtectionApplicationLayerAutomaticResponseConfigurationStatusOutput) ToStringPtrOutput() pulumi.StringPtrOutput

func (ProtectionApplicationLayerAutomaticResponseConfigurationStatusOutput) ToStringPtrOutputWithContext 

func (o ProtectionApplicationLayerAutomaticResponseConfigurationStatusOutput) ToStringPtrOutputWithContext(ctx context.Context) pulumi.StringPtrOutput

type ProtectionApplicationLayerAutomaticResponseConfigurationStatusPtrInput 

type ProtectionApplicationLayerAutomaticResponseConfigurationStatusPtrInput interface {
	pulumi.Input

	ToProtectionApplicationLayerAutomaticResponseConfigurationStatusPtrOutput() ProtectionApplicationLayerAutomaticResponseConfigurationStatusPtrOutput
	ToProtectionApplicationLayerAutomaticResponseConfigurationStatusPtrOutputWithContext(context.Context) ProtectionApplicationLayerAutomaticResponseConfigurationStatusPtrOutput
}

func ProtectionApplicationLayerAutomaticResponseConfigurationStatusPtr 

func ProtectionApplicationLayerAutomaticResponseConfigurationStatusPtr(v string) ProtectionApplicationLayerAutomaticResponseConfigurationStatusPtrInput

type ProtectionApplicationLayerAutomaticResponseConfigurationStatusPtrOutput 

type ProtectionApplicationLayerAutomaticResponseConfigurationStatusPtrOutput struct{ *pulumi.OutputState }

func (ProtectionApplicationLayerAutomaticResponseConfigurationStatusPtrOutput) Elem 

func (o ProtectionApplicationLayerAutomaticResponseConfigurationStatusPtrOutput) Elem() ProtectionApplicationLayerAutomaticResponseConfigurationStatusOutput

func (ProtectionApplicationLayerAutomaticResponseConfigurationStatusPtrOutput) ElementType 

func (ProtectionApplicationLayerAutomaticResponseConfigurationStatusPtrOutput) ElementType() reflect.Type

func (ProtectionApplicationLayerAutomaticResponseConfigurationStatusPtrOutput) ToProtectionApplicationLayerAutomaticResponseConfigurationStatusPtrOutput 

func (o ProtectionApplicationLayerAutomaticResponseConfigurationStatusPtrOutput) ToProtectionApplicationLayerAutomaticResponseConfigurationStatusPtrOutput() ProtectionApplicationLayerAutomaticResponseConfigurationStatusPtrOutput

func (ProtectionApplicationLayerAutomaticResponseConfigurationStatusPtrOutput) ToProtectionApplicationLayerAutomaticResponseConfigurationStatusPtrOutputWithContext 

func (o ProtectionApplicationLayerAutomaticResponseConfigurationStatusPtrOutput) ToProtectionApplicationLayerAutomaticResponseConfigurationStatusPtrOutputWithContext(ctx context.Context) ProtectionApplicationLayerAutomaticResponseConfigurationStatusPtrOutput

func (ProtectionApplicationLayerAutomaticResponseConfigurationStatusPtrOutput) ToStringPtrOutput 

func (o ProtectionApplicationLayerAutomaticResponseConfigurationStatusPtrOutput) ToStringPtrOutput() pulumi.StringPtrOutput

func (ProtectionApplicationLayerAutomaticResponseConfigurationStatusPtrOutput) ToStringPtrOutputWithContext 

func (o ProtectionApplicationLayerAutomaticResponseConfigurationStatusPtrOutput) ToStringPtrOutputWithContext(ctx context.Context) pulumi.StringPtrOutput

type ProtectionArgs 

type ProtectionArgs struct {
	ApplicationLayerAutomaticResponseConfiguration ProtectionApplicationLayerAutomaticResponseConfigurationPtrInput
	// The Amazon Resource Names (ARNs) of the health check to associate with the protection.
	HealthCheckArns pulumi.StringArrayInput
	// Friendly name for the Protection.
	Name pulumi.StringPtrInput
	// The ARN (Amazon Resource Name) of the resource to be protected.
	ResourceArn pulumi.StringInput
	// One or more tag key-value pairs for the Protection object.
	Tags aws.TagArrayInput
}

The set of arguments for constructing a Protection resource.

func (ProtectionArgs) ElementType 

func (ProtectionArgs) ElementType() reflect.Type

type ProtectionGroup 

type ProtectionGroup struct {
	pulumi.CustomResourceState

	// Defines how AWS Shield combines resource data for the group in order to detect, mitigate, and report events.
	// * Sum - Use the total traffic across the group. This is a good choice for most cases. Examples include Elastic IP addresses for EC2 instances that scale manually or automatically.
	// * Mean - Use the average of the traffic across the group. This is a good choice for resources that share traffic uniformly. Examples include accelerators and load balancers.
	// * Max - Use the highest traffic from each resource. This is useful for resources that don't share traffic and for resources that share that traffic in a non-uniform way. Examples include Amazon CloudFront and origin resources for CloudFront distributions.
	Aggregation ProtectionGroupAggregationOutput `pulumi:"aggregation"`
	// The Amazon Resource Names (ARNs) of the resources to include in the protection group. You must set this when you set `Pattern` to `ARBITRARY` and you must not set it for any other `Pattern` setting.
	Members pulumi.StringArrayOutput `pulumi:"members"`
	// The criteria to use to choose the protected resources for inclusion in the group. You can include all resources that have protections, provide a list of resource Amazon Resource Names (ARNs), or include all resources of a specified resource type.
	Pattern ProtectionGroupPatternOutput `pulumi:"pattern"`
	// The ARN (Amazon Resource Name) of the protection group.
	ProtectionGroupArn pulumi.StringOutput `pulumi:"protectionGroupArn"`
	// The name of the protection group. You use this to identify the protection group in lists and to manage the protection group, for example to update, delete, or describe it.
	ProtectionGroupId pulumi.StringOutput `pulumi:"protectionGroupId"`
	// The resource type to include in the protection group. All protected resources of this type are included in the protection group. Newly protected resources of this type are automatically added to the group. You must set this when you set `Pattern` to `BY_RESOURCE_TYPE` and you must not set it for any other `Pattern` setting.
	ResourceType ProtectionGroupResourceTypePtrOutput `pulumi:"resourceType"`
	// One or more tag key-value pairs for the Protection object.
	Tags aws.TagArrayOutput `pulumi:"tags"`
}

A grouping of protected resources so they can be handled as a collective. This resource grouping improves the accuracy of detection and reduces false positives.

## Example Usage ### Example

```go package main

import ( 

"github.com/pulumi/pulumi-aws-native/sdk/go/aws/shield"
"github.com/pulumi/pulumi/sdk/v3/go/pulumi"

) 

func main() {
	pulumi.Run(func(ctx *pulumi.Context) error {
		_, err := shield.NewProtectionGroup(ctx, "protectionGroup", &shield.ProtectionGroupArgs{
			ProtectionGroupId: pulumi.String("ProtectionGroupForAllResources"),
			Aggregation:       shield.ProtectionGroupAggregationSum,
			Pattern:           shield.ProtectionGroupPatternAll,
		})
		if err != nil {
			return err
		}
		return nil
	})
}

``` ### Example

```go package main

import ( 

"github.com/pulumi/pulumi-aws-native/sdk/go/aws/shield"
"github.com/pulumi/pulumi/sdk/v3/go/pulumi"

) 

func main() {
	pulumi.Run(func(ctx *pulumi.Context) error {
		_, err := shield.NewProtectionGroup(ctx, "protectionGroup", &shield.ProtectionGroupArgs{
			ProtectionGroupId: pulumi.String("ProtectionGroupForAllResources"),
			Aggregation:       shield.ProtectionGroupAggregationSum,
			Pattern:           shield.ProtectionGroupPatternAll,
		})
		if err != nil {
			return err
		}
		return nil
	})
}

``` ### Example

```go package main

import ( 

"github.com/pulumi/pulumi-aws-native/sdk/go/aws/shield"
"github.com/pulumi/pulumi/sdk/v3/go/pulumi"

) 

func main() {
	pulumi.Run(func(ctx *pulumi.Context) error {
		_, err := shield.NewProtectionGroup(ctx, "protectionGroup", &shield.ProtectionGroupArgs{
			ProtectionGroupId: pulumi.String("ProtectionGroupForAllEIPResources"),
			Aggregation:       shield.ProtectionGroupAggregationSum,
			Pattern:           shield.ProtectionGroupPatternByResourceType,
			ResourceType:      shield.ProtectionGroupResourceTypeElasticIpAllocation,
		})
		if err != nil {
			return err
		}
		return nil
	})
}

``` ### Example

```go package main

import ( 

"github.com/pulumi/pulumi-aws-native/sdk/go/aws/shield"
"github.com/pulumi/pulumi/sdk/v3/go/pulumi"

) 

func main() {
	pulumi.Run(func(ctx *pulumi.Context) error {
		_, err := shield.NewProtectionGroup(ctx, "protectionGroup", &shield.ProtectionGroupArgs{
			ProtectionGroupId: pulumi.String("ProtectionGroupForAllEIPResources"),
			Aggregation:       shield.ProtectionGroupAggregationSum,
			Pattern:           shield.ProtectionGroupPatternByResourceType,
			ResourceType:      shield.ProtectionGroupResourceTypeElasticIpAllocation,
		})
		if err != nil {
			return err
		}
		return nil
	})
}

```

func GetProtectionGroup 

func GetProtectionGroup(ctx *pulumi.Context,
	name string, id pulumi.IDInput, state *ProtectionGroupState, opts ...pulumi.ResourceOption) (*ProtectionGroup, error)

GetProtectionGroup gets an existing ProtectionGroup resource's state with the given name, ID, and optional state properties that are used to uniquely qualify the lookup (nil if not required).

func NewProtectionGroup 

func NewProtectionGroup(ctx *pulumi.Context,
	name string, args *ProtectionGroupArgs, opts ...pulumi.ResourceOption) (*ProtectionGroup, error)

NewProtectionGroup registers a new resource with the given unique name, arguments, and options.

func (*ProtectionGroup) ElementType 

func (*ProtectionGroup) ElementType() reflect.Type

func (*ProtectionGroup) ToProtectionGroupOutput 

func (i *ProtectionGroup) ToProtectionGroupOutput() ProtectionGroupOutput

func (*ProtectionGroup) ToProtectionGroupOutputWithContext 

func (i *ProtectionGroup) ToProtectionGroupOutputWithContext(ctx context.Context) ProtectionGroupOutput

type ProtectionGroupAggregation 

type ProtectionGroupAggregation string

Defines how AWS Shield combines resource data for the group in order to detect, mitigate, and report events. * Sum - Use the total traffic across the group. This is a good choice for most cases. Examples include Elastic IP addresses for EC2 instances that scale manually or automatically. * Mean - Use the average of the traffic across the group. This is a good choice for resources that share traffic uniformly. Examples include accelerators and load balancers. * Max - Use the highest traffic from each resource. This is useful for resources that don't share traffic and for resources that share that traffic in a non-uniform way. Examples include Amazon CloudFront and origin resources for CloudFront distributions.

func (ProtectionGroupAggregation) ElementType 

func (ProtectionGroupAggregation) ElementType() reflect.Type

func (ProtectionGroupAggregation) ToProtectionGroupAggregationOutput 

func (e ProtectionGroupAggregation) ToProtectionGroupAggregationOutput() ProtectionGroupAggregationOutput

func (ProtectionGroupAggregation) ToProtectionGroupAggregationOutputWithContext 

func (e ProtectionGroupAggregation) ToProtectionGroupAggregationOutputWithContext(ctx context.Context) ProtectionGroupAggregationOutput

func (ProtectionGroupAggregation) ToProtectionGroupAggregationPtrOutput 

func (e ProtectionGroupAggregation) ToProtectionGroupAggregationPtrOutput() ProtectionGroupAggregationPtrOutput

func (ProtectionGroupAggregation) ToProtectionGroupAggregationPtrOutputWithContext 

func (e ProtectionGroupAggregation) ToProtectionGroupAggregationPtrOutputWithContext(ctx context.Context) ProtectionGroupAggregationPtrOutput

func (ProtectionGroupAggregation) ToStringOutput 

func (e ProtectionGroupAggregation) ToStringOutput() pulumi.StringOutput

func (ProtectionGroupAggregation) ToStringOutputWithContext 

func (e ProtectionGroupAggregation) ToStringOutputWithContext(ctx context.Context) pulumi.StringOutput

func (ProtectionGroupAggregation) ToStringPtrOutput 

func (e ProtectionGroupAggregation) ToStringPtrOutput() pulumi.StringPtrOutput

func (ProtectionGroupAggregation) ToStringPtrOutputWithContext 

func (e ProtectionGroupAggregation) ToStringPtrOutputWithContext(ctx context.Context) pulumi.StringPtrOutput

type ProtectionGroupAggregationInput 

type ProtectionGroupAggregationInput interface {
	pulumi.Input

	ToProtectionGroupAggregationOutput() ProtectionGroupAggregationOutput
	ToProtectionGroupAggregationOutputWithContext(context.Context) ProtectionGroupAggregationOutput
}

ProtectionGroupAggregationInput is an input type that accepts values of the ProtectionGroupAggregation enum A concrete instance of `ProtectionGroupAggregationInput` can be one of the following: 

ProtectionGroupAggregationSum
ProtectionGroupAggregationMean
ProtectionGroupAggregationMax

type ProtectionGroupAggregationOutput 

type ProtectionGroupAggregationOutput struct{ *pulumi.OutputState }

func (ProtectionGroupAggregationOutput) ElementType 

func (ProtectionGroupAggregationOutput) ElementType() reflect.Type

func (ProtectionGroupAggregationOutput) ToProtectionGroupAggregationOutput 

func (o ProtectionGroupAggregationOutput) ToProtectionGroupAggregationOutput() ProtectionGroupAggregationOutput

func (ProtectionGroupAggregationOutput) ToProtectionGroupAggregationOutputWithContext 

func (o ProtectionGroupAggregationOutput) ToProtectionGroupAggregationOutputWithContext(ctx context.Context) ProtectionGroupAggregationOutput

func (ProtectionGroupAggregationOutput) ToProtectionGroupAggregationPtrOutput 

func (o ProtectionGroupAggregationOutput) ToProtectionGroupAggregationPtrOutput() ProtectionGroupAggregationPtrOutput

func (ProtectionGroupAggregationOutput) ToProtectionGroupAggregationPtrOutputWithContext 

func (o ProtectionGroupAggregationOutput) ToProtectionGroupAggregationPtrOutputWithContext(ctx context.Context) ProtectionGroupAggregationPtrOutput

func (ProtectionGroupAggregationOutput) ToStringOutput 

func (o ProtectionGroupAggregationOutput) ToStringOutput() pulumi.StringOutput

func (ProtectionGroupAggregationOutput) ToStringOutputWithContext 

func (o ProtectionGroupAggregationOutput) ToStringOutputWithContext(ctx context.Context) pulumi.StringOutput

func (ProtectionGroupAggregationOutput) ToStringPtrOutput 

func (o ProtectionGroupAggregationOutput) ToStringPtrOutput() pulumi.StringPtrOutput

func (ProtectionGroupAggregationOutput) ToStringPtrOutputWithContext 

func (o ProtectionGroupAggregationOutput) ToStringPtrOutputWithContext(ctx context.Context) pulumi.StringPtrOutput

type ProtectionGroupAggregationPtrInput 

type ProtectionGroupAggregationPtrInput interface {
	pulumi.Input

	ToProtectionGroupAggregationPtrOutput() ProtectionGroupAggregationPtrOutput
	ToProtectionGroupAggregationPtrOutputWithContext(context.Context) ProtectionGroupAggregationPtrOutput
}

func ProtectionGroupAggregationPtr 

func ProtectionGroupAggregationPtr(v string) ProtectionGroupAggregationPtrInput

type ProtectionGroupAggregationPtrOutput 

type ProtectionGroupAggregationPtrOutput struct{ *pulumi.OutputState }

func (ProtectionGroupAggregationPtrOutput) Elem 

func (o ProtectionGroupAggregationPtrOutput) Elem() ProtectionGroupAggregationOutput

func (ProtectionGroupAggregationPtrOutput) ElementType 

func (ProtectionGroupAggregationPtrOutput) ElementType() reflect.Type

func (ProtectionGroupAggregationPtrOutput) ToProtectionGroupAggregationPtrOutput 

func (o ProtectionGroupAggregationPtrOutput) ToProtectionGroupAggregationPtrOutput() ProtectionGroupAggregationPtrOutput

func (ProtectionGroupAggregationPtrOutput) ToProtectionGroupAggregationPtrOutputWithContext 

func (o ProtectionGroupAggregationPtrOutput) ToProtectionGroupAggregationPtrOutputWithContext(ctx context.Context) ProtectionGroupAggregationPtrOutput

func (ProtectionGroupAggregationPtrOutput) ToStringPtrOutput 

func (o ProtectionGroupAggregationPtrOutput) ToStringPtrOutput() pulumi.StringPtrOutput

func (ProtectionGroupAggregationPtrOutput) ToStringPtrOutputWithContext 

func (o ProtectionGroupAggregationPtrOutput) ToStringPtrOutputWithContext(ctx context.Context) pulumi.StringPtrOutput

type ProtectionGroupArgs 

type ProtectionGroupArgs struct {
	// Defines how AWS Shield combines resource data for the group in order to detect, mitigate, and report events.
	// * Sum - Use the total traffic across the group. This is a good choice for most cases. Examples include Elastic IP addresses for EC2 instances that scale manually or automatically.
	// * Mean - Use the average of the traffic across the group. This is a good choice for resources that share traffic uniformly. Examples include accelerators and load balancers.
	// * Max - Use the highest traffic from each resource. This is useful for resources that don't share traffic and for resources that share that traffic in a non-uniform way. Examples include Amazon CloudFront and origin resources for CloudFront distributions.
	Aggregation ProtectionGroupAggregationInput
	// The Amazon Resource Names (ARNs) of the resources to include in the protection group. You must set this when you set `Pattern` to `ARBITRARY` and you must not set it for any other `Pattern` setting.
	Members pulumi.StringArrayInput
	// The criteria to use to choose the protected resources for inclusion in the group. You can include all resources that have protections, provide a list of resource Amazon Resource Names (ARNs), or include all resources of a specified resource type.
	Pattern ProtectionGroupPatternInput
	// The name of the protection group. You use this to identify the protection group in lists and to manage the protection group, for example to update, delete, or describe it.
	ProtectionGroupId pulumi.StringInput
	// The resource type to include in the protection group. All protected resources of this type are included in the protection group. Newly protected resources of this type are automatically added to the group. You must set this when you set `Pattern` to `BY_RESOURCE_TYPE` and you must not set it for any other `Pattern` setting.
	ResourceType ProtectionGroupResourceTypePtrInput
	// One or more tag key-value pairs for the Protection object.
	Tags aws.TagArrayInput
}

The set of arguments for constructing a ProtectionGroup resource.

func (ProtectionGroupArgs) ElementType 

func (ProtectionGroupArgs) ElementType() reflect.Type

type ProtectionGroupInput 

type ProtectionGroupInput interface {
	pulumi.Input

	ToProtectionGroupOutput() ProtectionGroupOutput
	ToProtectionGroupOutputWithContext(ctx context.Context) ProtectionGroupOutput
}

type ProtectionGroupOutput 

type ProtectionGroupOutput struct{ *pulumi.OutputState }

func (ProtectionGroupOutput) Aggregation 

func (o ProtectionGroupOutput) Aggregation() ProtectionGroupAggregationOutput

Defines how AWS Shield combines resource data for the group in order to detect, mitigate, and report events. * Sum - Use the total traffic across the group. This is a good choice for most cases. Examples include Elastic IP addresses for EC2 instances that scale manually or automatically. * Mean - Use the average of the traffic across the group. This is a good choice for resources that share traffic uniformly. Examples include accelerators and load balancers. * Max - Use the highest traffic from each resource. This is useful for resources that don't share traffic and for resources that share that traffic in a non-uniform way. Examples include Amazon CloudFront and origin resources for CloudFront distributions.

func (ProtectionGroupOutput) ElementType 

func (ProtectionGroupOutput) ElementType() reflect.Type

func (ProtectionGroupOutput) Members 

func (o ProtectionGroupOutput) Members() pulumi.StringArrayOutput

The Amazon Resource Names (ARNs) of the resources to include in the protection group. You must set this when you set `Pattern` to `ARBITRARY` and you must not set it for any other `Pattern` setting.

func (ProtectionGroupOutput) Pattern 

func (o ProtectionGroupOutput) Pattern() ProtectionGroupPatternOutput

The criteria to use to choose the protected resources for inclusion in the group. You can include all resources that have protections, provide a list of resource Amazon Resource Names (ARNs), or include all resources of a specified resource type.

func (ProtectionGroupOutput) ProtectionGroupArn 

func (o ProtectionGroupOutput) ProtectionGroupArn() pulumi.StringOutput

The ARN (Amazon Resource Name) of the protection group.

func (ProtectionGroupOutput) ProtectionGroupId 

func (o ProtectionGroupOutput) ProtectionGroupId() pulumi.StringOutput

The name of the protection group. You use this to identify the protection group in lists and to manage the protection group, for example to update, delete, or describe it.

func (ProtectionGroupOutput) ResourceType 

func (o ProtectionGroupOutput) ResourceType() ProtectionGroupResourceTypePtrOutput

The resource type to include in the protection group. All protected resources of this type are included in the protection group. Newly protected resources of this type are automatically added to the group. You must set this when you set `Pattern` to `BY_RESOURCE_TYPE` and you must not set it for any other `Pattern` setting.

func (ProtectionGroupOutput) Tags 

func (o ProtectionGroupOutput) Tags() aws.TagArrayOutput

One or more tag key-value pairs for the Protection object.

func (ProtectionGroupOutput) ToProtectionGroupOutput 

func (o ProtectionGroupOutput) ToProtectionGroupOutput() ProtectionGroupOutput

func (ProtectionGroupOutput) ToProtectionGroupOutputWithContext 

func (o ProtectionGroupOutput) ToProtectionGroupOutputWithContext(ctx context.Context) ProtectionGroupOutput

type ProtectionGroupPattern 

type ProtectionGroupPattern string

The criteria to use to choose the protected resources for inclusion in the group. You can include all resources that have protections, provide a list of resource Amazon Resource Names (ARNs), or include all resources of a specified resource type.

func (ProtectionGroupPattern) ElementType 

func (ProtectionGroupPattern) ElementType() reflect.Type

func (ProtectionGroupPattern) ToProtectionGroupPatternOutput 

func (e ProtectionGroupPattern) ToProtectionGroupPatternOutput() ProtectionGroupPatternOutput

func (ProtectionGroupPattern) ToProtectionGroupPatternOutputWithContext 

func (e ProtectionGroupPattern) ToProtectionGroupPatternOutputWithContext(ctx context.Context) ProtectionGroupPatternOutput

func (ProtectionGroupPattern) ToProtectionGroupPatternPtrOutput 

func (e ProtectionGroupPattern) ToProtectionGroupPatternPtrOutput() ProtectionGroupPatternPtrOutput

func (ProtectionGroupPattern) ToProtectionGroupPatternPtrOutputWithContext 

func (e ProtectionGroupPattern) ToProtectionGroupPatternPtrOutputWithContext(ctx context.Context) ProtectionGroupPatternPtrOutput

func (ProtectionGroupPattern) ToStringOutput 

func (e ProtectionGroupPattern) ToStringOutput() pulumi.StringOutput

func (ProtectionGroupPattern) ToStringOutputWithContext 

func (e ProtectionGroupPattern) ToStringOutputWithContext(ctx context.Context) pulumi.StringOutput

func (ProtectionGroupPattern) ToStringPtrOutput 

func (e ProtectionGroupPattern) ToStringPtrOutput() pulumi.StringPtrOutput

func (ProtectionGroupPattern) ToStringPtrOutputWithContext 

func (e ProtectionGroupPattern) ToStringPtrOutputWithContext(ctx context.Context) pulumi.StringPtrOutput

type ProtectionGroupPatternInput 

type ProtectionGroupPatternInput interface {
	pulumi.Input

	ToProtectionGroupPatternOutput() ProtectionGroupPatternOutput
	ToProtectionGroupPatternOutputWithContext(context.Context) ProtectionGroupPatternOutput
}

ProtectionGroupPatternInput is an input type that accepts values of the ProtectionGroupPattern enum A concrete instance of `ProtectionGroupPatternInput` can be one of the following: 

ProtectionGroupPatternAll
ProtectionGroupPatternArbitrary
ProtectionGroupPatternByResourceType

type ProtectionGroupPatternOutput 

type ProtectionGroupPatternOutput struct{ *pulumi.OutputState }

func (ProtectionGroupPatternOutput) ElementType 

func (ProtectionGroupPatternOutput) ElementType() reflect.Type

func (ProtectionGroupPatternOutput) ToProtectionGroupPatternOutput 

func (o ProtectionGroupPatternOutput) ToProtectionGroupPatternOutput() ProtectionGroupPatternOutput

func (ProtectionGroupPatternOutput) ToProtectionGroupPatternOutputWithContext 

func (o ProtectionGroupPatternOutput) ToProtectionGroupPatternOutputWithContext(ctx context.Context) ProtectionGroupPatternOutput

func (ProtectionGroupPatternOutput) ToProtectionGroupPatternPtrOutput 

func (o ProtectionGroupPatternOutput) ToProtectionGroupPatternPtrOutput() ProtectionGroupPatternPtrOutput

func (ProtectionGroupPatternOutput) ToProtectionGroupPatternPtrOutputWithContext 

func (o ProtectionGroupPatternOutput) ToProtectionGroupPatternPtrOutputWithContext(ctx context.Context) ProtectionGroupPatternPtrOutput

func (ProtectionGroupPatternOutput) ToStringOutput 

func (o ProtectionGroupPatternOutput) ToStringOutput() pulumi.StringOutput

func (ProtectionGroupPatternOutput) ToStringOutputWithContext 

func (o ProtectionGroupPatternOutput) ToStringOutputWithContext(ctx context.Context) pulumi.StringOutput

func (ProtectionGroupPatternOutput) ToStringPtrOutput 

func (o ProtectionGroupPatternOutput) ToStringPtrOutput() pulumi.StringPtrOutput

func (ProtectionGroupPatternOutput) ToStringPtrOutputWithContext 

func (o ProtectionGroupPatternOutput) ToStringPtrOutputWithContext(ctx context.Context) pulumi.StringPtrOutput

type ProtectionGroupPatternPtrInput 

type ProtectionGroupPatternPtrInput interface {
	pulumi.Input

	ToProtectionGroupPatternPtrOutput() ProtectionGroupPatternPtrOutput
	ToProtectionGroupPatternPtrOutputWithContext(context.Context) ProtectionGroupPatternPtrOutput
}

func ProtectionGroupPatternPtr 

func ProtectionGroupPatternPtr(v string) ProtectionGroupPatternPtrInput

type ProtectionGroupPatternPtrOutput 

type ProtectionGroupPatternPtrOutput struct{ *pulumi.OutputState }

func (ProtectionGroupPatternPtrOutput) Elem 

func (o ProtectionGroupPatternPtrOutput) Elem() ProtectionGroupPatternOutput

func (ProtectionGroupPatternPtrOutput) ElementType 

func (ProtectionGroupPatternPtrOutput) ElementType() reflect.Type

func (ProtectionGroupPatternPtrOutput) ToProtectionGroupPatternPtrOutput 

func (o ProtectionGroupPatternPtrOutput) ToProtectionGroupPatternPtrOutput() ProtectionGroupPatternPtrOutput

func (ProtectionGroupPatternPtrOutput) ToProtectionGroupPatternPtrOutputWithContext 

func (o ProtectionGroupPatternPtrOutput) ToProtectionGroupPatternPtrOutputWithContext(ctx context.Context) ProtectionGroupPatternPtrOutput

func (ProtectionGroupPatternPtrOutput) ToStringPtrOutput 

func (o ProtectionGroupPatternPtrOutput) ToStringPtrOutput() pulumi.StringPtrOutput

func (ProtectionGroupPatternPtrOutput) ToStringPtrOutputWithContext 

func (o ProtectionGroupPatternPtrOutput) ToStringPtrOutputWithContext(ctx context.Context) pulumi.StringPtrOutput

type ProtectionGroupResourceType 

type ProtectionGroupResourceType string

The resource type to include in the protection group. All protected resources of this type are included in the protection group. Newly protected resources of this type are automatically added to the group. You must set this when you set `Pattern` to `BY_RESOURCE_TYPE` and you must not set it for any other `Pattern` setting.

func (ProtectionGroupResourceType) ElementType 

func (ProtectionGroupResourceType) ElementType() reflect.Type

func (ProtectionGroupResourceType) ToProtectionGroupResourceTypeOutput 

func (e ProtectionGroupResourceType) ToProtectionGroupResourceTypeOutput() ProtectionGroupResourceTypeOutput

func (ProtectionGroupResourceType) ToProtectionGroupResourceTypeOutputWithContext 

func (e ProtectionGroupResourceType) ToProtectionGroupResourceTypeOutputWithContext(ctx context.Context) ProtectionGroupResourceTypeOutput

func (ProtectionGroupResourceType) ToProtectionGroupResourceTypePtrOutput 

func (e ProtectionGroupResourceType) ToProtectionGroupResourceTypePtrOutput() ProtectionGroupResourceTypePtrOutput

func (ProtectionGroupResourceType) ToProtectionGroupResourceTypePtrOutputWithContext 

func (e ProtectionGroupResourceType) ToProtectionGroupResourceTypePtrOutputWithContext(ctx context.Context) ProtectionGroupResourceTypePtrOutput

func (ProtectionGroupResourceType) ToStringOutput 

func (e ProtectionGroupResourceType) ToStringOutput() pulumi.StringOutput

func (ProtectionGroupResourceType) ToStringOutputWithContext 

func (e ProtectionGroupResourceType) ToStringOutputWithContext(ctx context.Context) pulumi.StringOutput

func (ProtectionGroupResourceType) ToStringPtrOutput 

func (e ProtectionGroupResourceType) ToStringPtrOutput() pulumi.StringPtrOutput

func (ProtectionGroupResourceType) ToStringPtrOutputWithContext 

func (e ProtectionGroupResourceType) ToStringPtrOutputWithContext(ctx context.Context) pulumi.StringPtrOutput

type ProtectionGroupResourceTypeInput 

type ProtectionGroupResourceTypeInput interface {
	pulumi.Input

	ToProtectionGroupResourceTypeOutput() ProtectionGroupResourceTypeOutput
	ToProtectionGroupResourceTypeOutputWithContext(context.Context) ProtectionGroupResourceTypeOutput
}

ProtectionGroupResourceTypeInput is an input type that accepts values of the ProtectionGroupResourceType enum A concrete instance of `ProtectionGroupResourceTypeInput` can be one of the following: 

ProtectionGroupResourceTypeCloudfrontDistribution
ProtectionGroupResourceTypeRoute53HostedZone
ProtectionGroupResourceTypeElasticIpAllocation
ProtectionGroupResourceTypeClassicLoadBalancer
ProtectionGroupResourceTypeApplicationLoadBalancer
ProtectionGroupResourceTypeGlobalAccelerator

type ProtectionGroupResourceTypeOutput 

type ProtectionGroupResourceTypeOutput struct{ *pulumi.OutputState }

func (ProtectionGroupResourceTypeOutput) ElementType 

func (ProtectionGroupResourceTypeOutput) ElementType() reflect.Type

func (ProtectionGroupResourceTypeOutput) ToProtectionGroupResourceTypeOutput 

func (o ProtectionGroupResourceTypeOutput) ToProtectionGroupResourceTypeOutput() ProtectionGroupResourceTypeOutput

func (ProtectionGroupResourceTypeOutput) ToProtectionGroupResourceTypeOutputWithContext 

func (o ProtectionGroupResourceTypeOutput) ToProtectionGroupResourceTypeOutputWithContext(ctx context.Context) ProtectionGroupResourceTypeOutput

func (ProtectionGroupResourceTypeOutput) ToProtectionGroupResourceTypePtrOutput 

func (o ProtectionGroupResourceTypeOutput) ToProtectionGroupResourceTypePtrOutput() ProtectionGroupResourceTypePtrOutput

func (ProtectionGroupResourceTypeOutput) ToProtectionGroupResourceTypePtrOutputWithContext 

func (o ProtectionGroupResourceTypeOutput) ToProtectionGroupResourceTypePtrOutputWithContext(ctx context.Context) ProtectionGroupResourceTypePtrOutput

func (ProtectionGroupResourceTypeOutput) ToStringOutput 

func (o ProtectionGroupResourceTypeOutput) ToStringOutput() pulumi.StringOutput

func (ProtectionGroupResourceTypeOutput) ToStringOutputWithContext 

func (o ProtectionGroupResourceTypeOutput) ToStringOutputWithContext(ctx context.Context) pulumi.StringOutput

func (ProtectionGroupResourceTypeOutput) ToStringPtrOutput 

func (o ProtectionGroupResourceTypeOutput) ToStringPtrOutput() pulumi.StringPtrOutput

func (ProtectionGroupResourceTypeOutput) ToStringPtrOutputWithContext 

func (o ProtectionGroupResourceTypeOutput) ToStringPtrOutputWithContext(ctx context.Context) pulumi.StringPtrOutput

type ProtectionGroupResourceTypePtrInput 

type ProtectionGroupResourceTypePtrInput interface {
	pulumi.Input

	ToProtectionGroupResourceTypePtrOutput() ProtectionGroupResourceTypePtrOutput
	ToProtectionGroupResourceTypePtrOutputWithContext(context.Context) ProtectionGroupResourceTypePtrOutput
}

func ProtectionGroupResourceTypePtr 

func ProtectionGroupResourceTypePtr(v string) ProtectionGroupResourceTypePtrInput

type ProtectionGroupResourceTypePtrOutput 

type ProtectionGroupResourceTypePtrOutput struct{ *pulumi.OutputState }

func (ProtectionGroupResourceTypePtrOutput) Elem 

func (o ProtectionGroupResourceTypePtrOutput) Elem() ProtectionGroupResourceTypeOutput

func (ProtectionGroupResourceTypePtrOutput) ElementType 

func (ProtectionGroupResourceTypePtrOutput) ElementType() reflect.Type

func (ProtectionGroupResourceTypePtrOutput) ToProtectionGroupResourceTypePtrOutput 

func (o ProtectionGroupResourceTypePtrOutput) ToProtectionGroupResourceTypePtrOutput() ProtectionGroupResourceTypePtrOutput

func (ProtectionGroupResourceTypePtrOutput) ToProtectionGroupResourceTypePtrOutputWithContext 

func (o ProtectionGroupResourceTypePtrOutput) ToProtectionGroupResourceTypePtrOutputWithContext(ctx context.Context) ProtectionGroupResourceTypePtrOutput

func (ProtectionGroupResourceTypePtrOutput) ToStringPtrOutput 

func (o ProtectionGroupResourceTypePtrOutput) ToStringPtrOutput() pulumi.StringPtrOutput

func (ProtectionGroupResourceTypePtrOutput) ToStringPtrOutputWithContext 

func (o ProtectionGroupResourceTypePtrOutput) ToStringPtrOutputWithContext(ctx context.Context) pulumi.StringPtrOutput

type ProtectionGroupState 

type ProtectionGroupState struct {
}

func (ProtectionGroupState) ElementType 

func (ProtectionGroupState) ElementType() reflect.Type

type ProtectionGroupTag 

type ProtectionGroupTag struct {
	// Part of the key:value pair that defines a tag. You can use a tag key to describe a category of information, such as "customer." Tag keys are case-sensitive.
	Key string `pulumi:"key"`
	// Part of the key:value pair that defines a tag. You can use a tag value to describe a specific value within a category, such as "companyA" or "companyB." Tag values are case-sensitive.
	Value string `pulumi:"value"`
}

A tag associated with an AWS resource. Tags are key:value pairs that you can use to categorize and manage your resources, for purposes like billing or other management. Typically, the tag key represents a category, such as "environment", and the tag value represents a specific value within that category, such as "test," "development," or "production". Or you might set the tag key to "customer" and the value to the customer name or ID. You can specify one or more tags to add to each AWS resource, up to 50 tags for a resource.

type ProtectionInput 

type ProtectionInput interface {
	pulumi.Input

	ToProtectionOutput() ProtectionOutput
	ToProtectionOutputWithContext(ctx context.Context) ProtectionOutput
}

type ProtectionOutput 

type ProtectionOutput struct{ *pulumi.OutputState }

func (ProtectionOutput) ApplicationLayerAutomaticResponseConfiguration 

func (o ProtectionOutput) ApplicationLayerAutomaticResponseConfiguration() ProtectionApplicationLayerAutomaticResponseConfigurationPtrOutput

func (ProtectionOutput) ElementType 

func (ProtectionOutput) ElementType() reflect.Type

func (ProtectionOutput) HealthCheckArns 

func (o ProtectionOutput) HealthCheckArns() pulumi.StringArrayOutput

The Amazon Resource Names (ARNs) of the health check to associate with the protection.

func (ProtectionOutput) Name 

func (o ProtectionOutput) Name() pulumi.StringOutput

Friendly name for the Protection.

func (ProtectionOutput) ProtectionArn 

func (o ProtectionOutput) ProtectionArn() pulumi.StringOutput

The ARN (Amazon Resource Name) of the protection.

func (ProtectionOutput) ProtectionId 

func (o ProtectionOutput) ProtectionId() pulumi.StringOutput

The unique identifier (ID) of the protection.

func (ProtectionOutput) ResourceArn 

func (o ProtectionOutput) ResourceArn() pulumi.StringOutput

The ARN (Amazon Resource Name) of the resource to be protected.

func (ProtectionOutput) Tags 

func (o ProtectionOutput) Tags() aws.TagArrayOutput

One or more tag key-value pairs for the Protection object.

func (ProtectionOutput) ToProtectionOutput 

func (o ProtectionOutput) ToProtectionOutput() ProtectionOutput

func (ProtectionOutput) ToProtectionOutputWithContext 

func (o ProtectionOutput) ToProtectionOutputWithContext(ctx context.Context) ProtectionOutput

type ProtectionState 

type ProtectionState struct {
}

func (ProtectionState) ElementType 

func (ProtectionState) ElementType() reflect.Type

type ProtectionTag 

type ProtectionTag struct {
	// Part of the key:value pair that defines a tag. You can use a tag key to describe a category of information, such as "customer." Tag keys are case-sensitive.
	Key string `pulumi:"key"`
	// Part of the key:value pair that defines a tag. You can use a tag value to describe a specific value within a category, such as "companyA" or "companyB." Tag values are case-sensitive.
	Value string `pulumi:"value"`
}

A tag associated with an AWS resource. Tags are key:value pairs that you can use to categorize and manage your resources, for purposes like billing or other management. Typically, the tag key represents a category, such as "environment", and the tag value represents a specific value within that category, such as "test," "development," or "production". Or you might set the tag key to "customer" and the value to the customer name or ID. You can specify one or more tags to add to each AWS resource, up to 50 tags for a resource.

Source Files

View all Source files

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL
go.dev uses cookies from Google to deliver and enhance the quality of its services and to analyze traffic. Learn more.