vpn

package
v3.44.0 Latest Latest
Warning

This package is not in the latest version of its module.

 Go to latest Published: Sep 28, 2023 License: Apache-2.0 Imports: 8 Imported by: 0

Documentation

Index

Constants

This section is empty.

Variables

This section is empty.

Functions

This section is empty.

Types

type Connection 

type Connection struct {
	pulumi.CustomResourceState

	// The configurations of the BGP routing protocol. See the following `Block bgpConfig`.
	BgpConfig ConnectionBgpConfigOutput `pulumi:"bgpConfig"`
	// The ID of the customer gateway.
	CustomerGatewayId pulumi.StringOutput `pulumi:"customerGatewayId"`
	// Whether to delete a successfully negotiated IPsec tunnel and initiate a negotiation again. Valid value:true,false.
	EffectImmediately pulumi.BoolPtrOutput `pulumi:"effectImmediately"`
	// Specifies whether to enable the dead peer detection (DPD) feature. Valid values: `true`(default), `false`.
	EnableDpd pulumi.BoolOutput `pulumi:"enableDpd"`
	// Specifies whether to enable NAT traversal. Valid values: `true`(default), `false`.
	EnableNatTraversal pulumi.BoolOutput `pulumi:"enableNatTraversal"`
	// The health check configurations. See the following `Block healthCheckConfig`.
	HealthCheckConfig ConnectionHealthCheckConfigOutput `pulumi:"healthCheckConfig"`
	// The configurations of phase-one negotiation. See the following `Block ikeConfig`.
	IkeConfig ConnectionIkeConfigOutput `pulumi:"ikeConfig"`
	// The configurations of phase-two negotiation. See the following `Block ipsecConfig`.
	IpsecConfig ConnectionIpsecConfigOutput `pulumi:"ipsecConfig"`
	// The CIDR block of the VPC to be connected with the local data center. This parameter is used for phase-two negotiation.
	LocalSubnets pulumi.StringArrayOutput `pulumi:"localSubnets"`
	// The name of the IPsec connection.
	Name pulumi.StringOutput `pulumi:"name"`
	// The CIDR block of the local data center. This parameter is used for phase-two negotiation.
	RemoteSubnets pulumi.StringArrayOutput `pulumi:"remoteSubnets"`
	// The status of VPN connection.
	Status pulumi.StringOutput `pulumi:"status"`
	// The ID of the VPN gateway.
	VpnGatewayId pulumi.StringOutput `pulumi:"vpnGatewayId"`
}

## Example Usage

Basic Usage

```go package main

import ( 

"github.com/pulumi/pulumi-alicloud/sdk/v3/go/alicloud"
"github.com/pulumi/pulumi-alicloud/sdk/v3/go/alicloud/vpc"
"github.com/pulumi/pulumi-alicloud/sdk/v3/go/alicloud/vpn"
"github.com/pulumi/pulumi/sdk/v3/go/pulumi"

) 

func main() {
	pulumi.Run(func(ctx *pulumi.Context) error {
		fooZones, err := alicloud.GetZones(ctx, &alicloud.GetZonesArgs{
			AvailableResourceCreation: pulumi.StringRef("VSwitch"),
		}, nil)
		if err != nil {
			return err
		}
		fooNetwork, err := vpc.NewNetwork(ctx, "fooNetwork", &vpc.NetworkArgs{
			VpcName:   pulumi.String("terraform-example"),
			CidrBlock: pulumi.String("172.16.0.0/12"),
		})
		if err != nil {
			return err
		}
		fooSwitch, err := vpc.NewSwitch(ctx, "fooSwitch", &vpc.SwitchArgs{
			VswitchName: pulumi.String("terraform-example"),
			CidrBlock:   pulumi.String("172.16.0.0/21"),
			VpcId:       fooNetwork.ID(),
			ZoneId:      *pulumi.String(fooZones.Zones[0].Id),
		})
		if err != nil {
			return err
		}
		fooGateway, err := vpn.NewGateway(ctx, "fooGateway", &vpn.GatewayArgs{
			VpcId:              fooNetwork.ID(),
			Bandwidth:          pulumi.Int(10),
			EnableSsl:          pulumi.Bool(true),
			InstanceChargeType: pulumi.String("PrePaid"),
			Description:        pulumi.String("test_create_description"),
			VswitchId:          fooSwitch.ID(),
		})
		if err != nil {
			return err
		}
		fooCustomerGateway, err := vpn.NewCustomerGateway(ctx, "fooCustomerGateway", &vpn.CustomerGatewayArgs{
			IpAddress:   pulumi.String("42.104.22.210"),
			Description: pulumi.String("terraform-example"),
		})
		if err != nil {
			return err
		}
		_, err = vpn.NewConnection(ctx, "fooConnection", &vpn.ConnectionArgs{
			VpnGatewayId:      fooGateway.ID(),
			CustomerGatewayId: fooCustomerGateway.ID(),
			LocalSubnets: pulumi.StringArray{
				pulumi.String("172.16.0.0/24"),
				pulumi.String("172.16.1.0/24"),
			},
			RemoteSubnets: pulumi.StringArray{
				pulumi.String("10.0.0.0/24"),
				pulumi.String("10.0.1.0/24"),
			},
			EffectImmediately: pulumi.Bool(true),
			IkeConfig: &vpn.ConnectionIkeConfigArgs{
				IkeAuthAlg:  pulumi.String("md5"),
				IkeEncAlg:   pulumi.String("des"),
				IkeVersion:  pulumi.String("ikev2"),
				IkeMode:     pulumi.String("main"),
				IkeLifetime: pulumi.Int(86400),
				Psk:         pulumi.String("tf-testvpn2"),
				IkePfs:      pulumi.String("group1"),
				IkeRemoteId: pulumi.String("testbob2"),
				IkeLocalId:  pulumi.String("testalice2"),
			},
			IpsecConfig: &vpn.ConnectionIpsecConfigArgs{
				IpsecPfs:      pulumi.String("group5"),
				IpsecEncAlg:   pulumi.String("des"),
				IpsecAuthAlg:  pulumi.String("md5"),
				IpsecLifetime: pulumi.Int(8640),
			},
		})
		if err != nil {
			return err
		}
		return nil
	})
}

```

## Import

VPN connection can be imported using the id, e.g.

```sh 

$ pulumi import alicloud:vpn/connection:Connection example vco-abc123456

```

func GetConnection 

func GetConnection(ctx *pulumi.Context,
	name string, id pulumi.IDInput, state *ConnectionState, opts ...pulumi.ResourceOption) (*Connection, error)

GetConnection gets an existing Connection resource's state with the given name, ID, and optional state properties that are used to uniquely qualify the lookup (nil if not required).

func NewConnection 

func NewConnection(ctx *pulumi.Context,
	name string, args *ConnectionArgs, opts ...pulumi.ResourceOption) (*Connection, error)

NewConnection registers a new resource with the given unique name, arguments, and options.

func (*Connection) ElementType 

func (*Connection) ElementType() reflect.Type

func (*Connection) ToConnectionOutput 

func (i *Connection) ToConnectionOutput() ConnectionOutput

func (*Connection) ToConnectionOutputWithContext 

func (i *Connection) ToConnectionOutputWithContext(ctx context.Context) ConnectionOutput

func (*Connection) ToOutput added in v3.43.1 

func (i *Connection) ToOutput(ctx context.Context) pulumix.Output[*Connection]

type ConnectionArgs 

type ConnectionArgs struct {
	// The configurations of the BGP routing protocol. See the following `Block bgpConfig`.
	BgpConfig ConnectionBgpConfigPtrInput
	// The ID of the customer gateway.
	CustomerGatewayId pulumi.StringInput
	// Whether to delete a successfully negotiated IPsec tunnel and initiate a negotiation again. Valid value:true,false.
	EffectImmediately pulumi.BoolPtrInput
	// Specifies whether to enable the dead peer detection (DPD) feature. Valid values: `true`(default), `false`.
	EnableDpd pulumi.BoolPtrInput
	// Specifies whether to enable NAT traversal. Valid values: `true`(default), `false`.
	EnableNatTraversal pulumi.BoolPtrInput
	// The health check configurations. See the following `Block healthCheckConfig`.
	HealthCheckConfig ConnectionHealthCheckConfigPtrInput
	// The configurations of phase-one negotiation. See the following `Block ikeConfig`.
	IkeConfig ConnectionIkeConfigPtrInput
	// The configurations of phase-two negotiation. See the following `Block ipsecConfig`.
	IpsecConfig ConnectionIpsecConfigPtrInput
	// The CIDR block of the VPC to be connected with the local data center. This parameter is used for phase-two negotiation.
	LocalSubnets pulumi.StringArrayInput
	// The name of the IPsec connection.
	Name pulumi.StringPtrInput
	// The CIDR block of the local data center. This parameter is used for phase-two negotiation.
	RemoteSubnets pulumi.StringArrayInput
	// The ID of the VPN gateway.
	VpnGatewayId pulumi.StringInput
}

The set of arguments for constructing a Connection resource.

func (ConnectionArgs) ElementType 

func (ConnectionArgs) ElementType() reflect.Type

type ConnectionArray 

type ConnectionArray []ConnectionInput

func (ConnectionArray) ElementType 

func (ConnectionArray) ElementType() reflect.Type

func (ConnectionArray) ToConnectionArrayOutput 

func (i ConnectionArray) ToConnectionArrayOutput() ConnectionArrayOutput

func (ConnectionArray) ToConnectionArrayOutputWithContext 

func (i ConnectionArray) ToConnectionArrayOutputWithContext(ctx context.Context) ConnectionArrayOutput

func (ConnectionArray) ToOutput added in v3.43.1 

func (i ConnectionArray) ToOutput(ctx context.Context) pulumix.Output[[]*Connection]

type ConnectionArrayInput 

type ConnectionArrayInput interface {
	pulumi.Input

	ToConnectionArrayOutput() ConnectionArrayOutput
	ToConnectionArrayOutputWithContext(context.Context) ConnectionArrayOutput
}

ConnectionArrayInput is an input type that accepts ConnectionArray and ConnectionArrayOutput values. You can construct a concrete instance of `ConnectionArrayInput` via: 

ConnectionArray{ ConnectionArgs{...} }

type ConnectionArrayOutput 

type ConnectionArrayOutput struct{ *pulumi.OutputState }

func (ConnectionArrayOutput) ElementType 

func (ConnectionArrayOutput) ElementType() reflect.Type

func (ConnectionArrayOutput) Index 

func (o ConnectionArrayOutput) Index(i pulumi.IntInput) ConnectionOutput

func (ConnectionArrayOutput) ToConnectionArrayOutput 

func (o ConnectionArrayOutput) ToConnectionArrayOutput() ConnectionArrayOutput

func (ConnectionArrayOutput) ToConnectionArrayOutputWithContext 

func (o ConnectionArrayOutput) ToConnectionArrayOutputWithContext(ctx context.Context) ConnectionArrayOutput

func (ConnectionArrayOutput) ToOutput added in v3.43.1 

func (o ConnectionArrayOutput) ToOutput(ctx context.Context) pulumix.Output[[]*Connection]

type ConnectionBgpConfig added in v3.20.0 

type ConnectionBgpConfig struct {
	// Whether to enable Health Check.
	Enable *bool `pulumi:"enable"`
	// The ASN on the Alibaba Cloud side.
	LocalAsn *string `pulumi:"localAsn"`
	// The BGP IP address on the Alibaba Cloud side.
	LocalBgpIp *string `pulumi:"localBgpIp"`
	// The CIDR block of the IPsec tunnel. The CIDR block belongs to 169.254.0.0/16. The mask of the CIDR block is 30 bits in length.
	TunnelCidr *string `pulumi:"tunnelCidr"`
}

type ConnectionBgpConfigArgs added in v3.20.0 

type ConnectionBgpConfigArgs struct {
	// Whether to enable Health Check.
	Enable pulumi.BoolPtrInput `pulumi:"enable"`
	// The ASN on the Alibaba Cloud side.
	LocalAsn pulumi.StringPtrInput `pulumi:"localAsn"`
	// The BGP IP address on the Alibaba Cloud side.
	LocalBgpIp pulumi.StringPtrInput `pulumi:"localBgpIp"`
	// The CIDR block of the IPsec tunnel. The CIDR block belongs to 169.254.0.0/16. The mask of the CIDR block is 30 bits in length.
	TunnelCidr pulumi.StringPtrInput `pulumi:"tunnelCidr"`
}

func (ConnectionBgpConfigArgs) ElementType added in v3.20.0 

func (ConnectionBgpConfigArgs) ElementType() reflect.Type

func (ConnectionBgpConfigArgs) ToConnectionBgpConfigOutput added in v3.20.0 

func (i ConnectionBgpConfigArgs) ToConnectionBgpConfigOutput() ConnectionBgpConfigOutput

func (ConnectionBgpConfigArgs) ToConnectionBgpConfigOutputWithContext added in v3.20.0 

func (i ConnectionBgpConfigArgs) ToConnectionBgpConfigOutputWithContext(ctx context.Context) ConnectionBgpConfigOutput

func (ConnectionBgpConfigArgs) ToConnectionBgpConfigPtrOutput added in v3.20.0 

func (i ConnectionBgpConfigArgs) ToConnectionBgpConfigPtrOutput() ConnectionBgpConfigPtrOutput

func (ConnectionBgpConfigArgs) ToConnectionBgpConfigPtrOutputWithContext added in v3.20.0 

func (i ConnectionBgpConfigArgs) ToConnectionBgpConfigPtrOutputWithContext(ctx context.Context) ConnectionBgpConfigPtrOutput

func (ConnectionBgpConfigArgs) ToOutput added in v3.43.1 

func (i ConnectionBgpConfigArgs) ToOutput(ctx context.Context) pulumix.Output[ConnectionBgpConfig]

type ConnectionBgpConfigInput added in v3.20.0 

type ConnectionBgpConfigInput interface {
	pulumi.Input

	ToConnectionBgpConfigOutput() ConnectionBgpConfigOutput
	ToConnectionBgpConfigOutputWithContext(context.Context) ConnectionBgpConfigOutput
}

ConnectionBgpConfigInput is an input type that accepts ConnectionBgpConfigArgs and ConnectionBgpConfigOutput values. You can construct a concrete instance of `ConnectionBgpConfigInput` via: 

ConnectionBgpConfigArgs{...}

type ConnectionBgpConfigOutput added in v3.20.0 

type ConnectionBgpConfigOutput struct{ *pulumi.OutputState }

func (ConnectionBgpConfigOutput) ElementType added in v3.20.0 

func (ConnectionBgpConfigOutput) ElementType() reflect.Type

func (ConnectionBgpConfigOutput) Enable added in v3.20.0 

func (o ConnectionBgpConfigOutput) Enable() pulumi.BoolPtrOutput

Whether to enable Health Check.

func (ConnectionBgpConfigOutput) LocalAsn added in v3.20.0 

func (o ConnectionBgpConfigOutput) LocalAsn() pulumi.StringPtrOutput

The ASN on the Alibaba Cloud side.

func (ConnectionBgpConfigOutput) LocalBgpIp added in v3.20.0 

func (o ConnectionBgpConfigOutput) LocalBgpIp() pulumi.StringPtrOutput

The BGP IP address on the Alibaba Cloud side.

func (ConnectionBgpConfigOutput) ToConnectionBgpConfigOutput added in v3.20.0 

func (o ConnectionBgpConfigOutput) ToConnectionBgpConfigOutput() ConnectionBgpConfigOutput

func (ConnectionBgpConfigOutput) ToConnectionBgpConfigOutputWithContext added in v3.20.0 

func (o ConnectionBgpConfigOutput) ToConnectionBgpConfigOutputWithContext(ctx context.Context) ConnectionBgpConfigOutput

func (ConnectionBgpConfigOutput) ToConnectionBgpConfigPtrOutput added in v3.20.0 

func (o ConnectionBgpConfigOutput) ToConnectionBgpConfigPtrOutput() ConnectionBgpConfigPtrOutput

func (ConnectionBgpConfigOutput) ToConnectionBgpConfigPtrOutputWithContext added in v3.20.0 

func (o ConnectionBgpConfigOutput) ToConnectionBgpConfigPtrOutputWithContext(ctx context.Context) ConnectionBgpConfigPtrOutput

func (ConnectionBgpConfigOutput) ToOutput added in v3.43.1 

func (o ConnectionBgpConfigOutput) ToOutput(ctx context.Context) pulumix.Output[ConnectionBgpConfig]

func (ConnectionBgpConfigOutput) TunnelCidr added in v3.20.0 

func (o ConnectionBgpConfigOutput) TunnelCidr() pulumi.StringPtrOutput

The CIDR block of the IPsec tunnel. The CIDR block belongs to 169.254.0.0/16. The mask of the CIDR block is 30 bits in length.

type ConnectionBgpConfigPtrInput added in v3.20.0 

type ConnectionBgpConfigPtrInput interface {
	pulumi.Input

	ToConnectionBgpConfigPtrOutput() ConnectionBgpConfigPtrOutput
	ToConnectionBgpConfigPtrOutputWithContext(context.Context) ConnectionBgpConfigPtrOutput
}

ConnectionBgpConfigPtrInput is an input type that accepts ConnectionBgpConfigArgs, ConnectionBgpConfigPtr and ConnectionBgpConfigPtrOutput values. You can construct a concrete instance of `ConnectionBgpConfigPtrInput` via: 

        ConnectionBgpConfigArgs{...}

or:

        nil

func ConnectionBgpConfigPtr added in v3.20.0 

func ConnectionBgpConfigPtr(v *ConnectionBgpConfigArgs) ConnectionBgpConfigPtrInput

type ConnectionBgpConfigPtrOutput added in v3.20.0 

type ConnectionBgpConfigPtrOutput struct{ *pulumi.OutputState }

func (ConnectionBgpConfigPtrOutput) Elem added in v3.20.0 

func (o ConnectionBgpConfigPtrOutput) Elem() ConnectionBgpConfigOutput

func (ConnectionBgpConfigPtrOutput) ElementType added in v3.20.0 

func (ConnectionBgpConfigPtrOutput) ElementType() reflect.Type

func (ConnectionBgpConfigPtrOutput) Enable added in v3.20.0 

func (o ConnectionBgpConfigPtrOutput) Enable() pulumi.BoolPtrOutput

Whether to enable Health Check.

func (ConnectionBgpConfigPtrOutput) LocalAsn added in v3.20.0 

func (o ConnectionBgpConfigPtrOutput) LocalAsn() pulumi.StringPtrOutput

The ASN on the Alibaba Cloud side.

func (ConnectionBgpConfigPtrOutput) LocalBgpIp added in v3.20.0 

func (o ConnectionBgpConfigPtrOutput) LocalBgpIp() pulumi.StringPtrOutput

The BGP IP address on the Alibaba Cloud side.

func (ConnectionBgpConfigPtrOutput) ToConnectionBgpConfigPtrOutput added in v3.20.0 

func (o ConnectionBgpConfigPtrOutput) ToConnectionBgpConfigPtrOutput() ConnectionBgpConfigPtrOutput

func (ConnectionBgpConfigPtrOutput) ToConnectionBgpConfigPtrOutputWithContext added in v3.20.0 

func (o ConnectionBgpConfigPtrOutput) ToConnectionBgpConfigPtrOutputWithContext(ctx context.Context) ConnectionBgpConfigPtrOutput

func (ConnectionBgpConfigPtrOutput) ToOutput added in v3.43.1 

func (o ConnectionBgpConfigPtrOutput) ToOutput(ctx context.Context) pulumix.Output[*ConnectionBgpConfig]

func (ConnectionBgpConfigPtrOutput) TunnelCidr added in v3.20.0 

func (o ConnectionBgpConfigPtrOutput) TunnelCidr() pulumi.StringPtrOutput

The CIDR block of the IPsec tunnel. The CIDR block belongs to 169.254.0.0/16. The mask of the CIDR block is 30 bits in length.

type ConnectionHealthCheckConfig added in v3.20.0 

type ConnectionHealthCheckConfig struct {
	// The destination IP address.
	Dip *string `pulumi:"dip"`
	// Whether to enable Health Check.
	Enable *bool `pulumi:"enable"`
	// The interval between two consecutive health checks. Unit: seconds.
	Interval *int `pulumi:"interval"`
	// The maximum number of health check retries.
	Retry *int `pulumi:"retry"`
	// The source IP address.
	Sip *string `pulumi:"sip"`
}

type ConnectionHealthCheckConfigArgs added in v3.20.0 

type ConnectionHealthCheckConfigArgs struct {
	// The destination IP address.
	Dip pulumi.StringPtrInput `pulumi:"dip"`
	// Whether to enable Health Check.
	Enable pulumi.BoolPtrInput `pulumi:"enable"`
	// The interval between two consecutive health checks. Unit: seconds.
	Interval pulumi.IntPtrInput `pulumi:"interval"`
	// The maximum number of health check retries.
	Retry pulumi.IntPtrInput `pulumi:"retry"`
	// The source IP address.
	Sip pulumi.StringPtrInput `pulumi:"sip"`
}

func (ConnectionHealthCheckConfigArgs) ElementType added in v3.20.0 

func (ConnectionHealthCheckConfigArgs) ElementType() reflect.Type

func (ConnectionHealthCheckConfigArgs) ToConnectionHealthCheckConfigOutput added in v3.20.0 

func (i ConnectionHealthCheckConfigArgs) ToConnectionHealthCheckConfigOutput() ConnectionHealthCheckConfigOutput

func (ConnectionHealthCheckConfigArgs) ToConnectionHealthCheckConfigOutputWithContext added in v3.20.0 

func (i ConnectionHealthCheckConfigArgs) ToConnectionHealthCheckConfigOutputWithContext(ctx context.Context) ConnectionHealthCheckConfigOutput

func (ConnectionHealthCheckConfigArgs) ToConnectionHealthCheckConfigPtrOutput added in v3.20.0 

func (i ConnectionHealthCheckConfigArgs) ToConnectionHealthCheckConfigPtrOutput() ConnectionHealthCheckConfigPtrOutput

func (ConnectionHealthCheckConfigArgs) ToConnectionHealthCheckConfigPtrOutputWithContext added in v3.20.0 

func (i ConnectionHealthCheckConfigArgs) ToConnectionHealthCheckConfigPtrOutputWithContext(ctx context.Context) ConnectionHealthCheckConfigPtrOutput

func (ConnectionHealthCheckConfigArgs) ToOutput added in v3.43.1 

func (i ConnectionHealthCheckConfigArgs) ToOutput(ctx context.Context) pulumix.Output[ConnectionHealthCheckConfig]

type ConnectionHealthCheckConfigInput added in v3.20.0 

type ConnectionHealthCheckConfigInput interface {
	pulumi.Input

	ToConnectionHealthCheckConfigOutput() ConnectionHealthCheckConfigOutput
	ToConnectionHealthCheckConfigOutputWithContext(context.Context) ConnectionHealthCheckConfigOutput
}

ConnectionHealthCheckConfigInput is an input type that accepts ConnectionHealthCheckConfigArgs and ConnectionHealthCheckConfigOutput values. You can construct a concrete instance of `ConnectionHealthCheckConfigInput` via: 

ConnectionHealthCheckConfigArgs{...}

type ConnectionHealthCheckConfigOutput added in v3.20.0 

type ConnectionHealthCheckConfigOutput struct{ *pulumi.OutputState }

func (ConnectionHealthCheckConfigOutput) Dip added in v3.20.0 

func (o ConnectionHealthCheckConfigOutput) Dip() pulumi.StringPtrOutput

The destination IP address.

func (ConnectionHealthCheckConfigOutput) ElementType added in v3.20.0 

func (ConnectionHealthCheckConfigOutput) ElementType() reflect.Type

func (ConnectionHealthCheckConfigOutput) Enable added in v3.20.0 

func (o ConnectionHealthCheckConfigOutput) Enable() pulumi.BoolPtrOutput

Whether to enable Health Check.

func (ConnectionHealthCheckConfigOutput) Interval added in v3.20.0 

func (o ConnectionHealthCheckConfigOutput) Interval() pulumi.IntPtrOutput

The interval between two consecutive health checks. Unit: seconds.

func (ConnectionHealthCheckConfigOutput) Retry added in v3.20.0 

func (o ConnectionHealthCheckConfigOutput) Retry() pulumi.IntPtrOutput

The maximum number of health check retries.

func (ConnectionHealthCheckConfigOutput) Sip added in v3.20.0 

func (o ConnectionHealthCheckConfigOutput) Sip() pulumi.StringPtrOutput

The source IP address.

func (ConnectionHealthCheckConfigOutput) ToConnectionHealthCheckConfigOutput added in v3.20.0 

func (o ConnectionHealthCheckConfigOutput) ToConnectionHealthCheckConfigOutput() ConnectionHealthCheckConfigOutput

func (ConnectionHealthCheckConfigOutput) ToConnectionHealthCheckConfigOutputWithContext added in v3.20.0 

func (o ConnectionHealthCheckConfigOutput) ToConnectionHealthCheckConfigOutputWithContext(ctx context.Context) ConnectionHealthCheckConfigOutput

func (ConnectionHealthCheckConfigOutput) ToConnectionHealthCheckConfigPtrOutput added in v3.20.0 

func (o ConnectionHealthCheckConfigOutput) ToConnectionHealthCheckConfigPtrOutput() ConnectionHealthCheckConfigPtrOutput

func (ConnectionHealthCheckConfigOutput) ToConnectionHealthCheckConfigPtrOutputWithContext added in v3.20.0 

func (o ConnectionHealthCheckConfigOutput) ToConnectionHealthCheckConfigPtrOutputWithContext(ctx context.Context) ConnectionHealthCheckConfigPtrOutput

func (ConnectionHealthCheckConfigOutput) ToOutput added in v3.43.1 

func (o ConnectionHealthCheckConfigOutput) ToOutput(ctx context.Context) pulumix.Output[ConnectionHealthCheckConfig]

type ConnectionHealthCheckConfigPtrInput added in v3.20.0 

type ConnectionHealthCheckConfigPtrInput interface {
	pulumi.Input

	ToConnectionHealthCheckConfigPtrOutput() ConnectionHealthCheckConfigPtrOutput
	ToConnectionHealthCheckConfigPtrOutputWithContext(context.Context) ConnectionHealthCheckConfigPtrOutput
}

ConnectionHealthCheckConfigPtrInput is an input type that accepts ConnectionHealthCheckConfigArgs, ConnectionHealthCheckConfigPtr and ConnectionHealthCheckConfigPtrOutput values. You can construct a concrete instance of `ConnectionHealthCheckConfigPtrInput` via: 

        ConnectionHealthCheckConfigArgs{...}

or:

        nil

func ConnectionHealthCheckConfigPtr added in v3.20.0 

func ConnectionHealthCheckConfigPtr(v *ConnectionHealthCheckConfigArgs) ConnectionHealthCheckConfigPtrInput

type ConnectionHealthCheckConfigPtrOutput added in v3.20.0 

type ConnectionHealthCheckConfigPtrOutput struct{ *pulumi.OutputState }

func (ConnectionHealthCheckConfigPtrOutput) Dip added in v3.20.0 

func (o ConnectionHealthCheckConfigPtrOutput) Dip() pulumi.StringPtrOutput

The destination IP address.

func (ConnectionHealthCheckConfigPtrOutput) Elem added in v3.20.0 

func (o ConnectionHealthCheckConfigPtrOutput) Elem() ConnectionHealthCheckConfigOutput

func (ConnectionHealthCheckConfigPtrOutput) ElementType added in v3.20.0 

func (ConnectionHealthCheckConfigPtrOutput) ElementType() reflect.Type

func (ConnectionHealthCheckConfigPtrOutput) Enable added in v3.20.0 

func (o ConnectionHealthCheckConfigPtrOutput) Enable() pulumi.BoolPtrOutput

Whether to enable Health Check.

func (ConnectionHealthCheckConfigPtrOutput) Interval added in v3.20.0 

func (o ConnectionHealthCheckConfigPtrOutput) Interval() pulumi.IntPtrOutput

The interval between two consecutive health checks. Unit: seconds.

func (ConnectionHealthCheckConfigPtrOutput) Retry added in v3.20.0 

func (o ConnectionHealthCheckConfigPtrOutput) Retry() pulumi.IntPtrOutput

The maximum number of health check retries.

func (ConnectionHealthCheckConfigPtrOutput) Sip added in v3.20.0 

func (o ConnectionHealthCheckConfigPtrOutput) Sip() pulumi.StringPtrOutput

The source IP address.

func (ConnectionHealthCheckConfigPtrOutput) ToConnectionHealthCheckConfigPtrOutput added in v3.20.0 

func (o ConnectionHealthCheckConfigPtrOutput) ToConnectionHealthCheckConfigPtrOutput() ConnectionHealthCheckConfigPtrOutput

func (ConnectionHealthCheckConfigPtrOutput) ToConnectionHealthCheckConfigPtrOutputWithContext added in v3.20.0 

func (o ConnectionHealthCheckConfigPtrOutput) ToConnectionHealthCheckConfigPtrOutputWithContext(ctx context.Context) ConnectionHealthCheckConfigPtrOutput

func (ConnectionHealthCheckConfigPtrOutput) ToOutput added in v3.43.1 

func (o ConnectionHealthCheckConfigPtrOutput) ToOutput(ctx context.Context) pulumix.Output[*ConnectionHealthCheckConfig]

type ConnectionIkeConfig 

type ConnectionIkeConfig struct {
	// The authentication algorithm of phase-one negotiation. Valid value: md5 | sha1 . Default value: md5
	IkeAuthAlg *string `pulumi:"ikeAuthAlg"`
	// The encryption algorithm of phase-one negotiation. Valid value: aes | aes192 | aes256 | des | 3des. Default Valid value: aes
	IkeEncAlg *string `pulumi:"ikeEncAlg"`
	// The SA lifecycle as the result of phase-one negotiation. The valid value of n is [0, 86400], the unit is second and the default value is 86400.
	IkeLifetime *int `pulumi:"ikeLifetime"`
	// The identification of the VPN gateway.
	IkeLocalId *string `pulumi:"ikeLocalId"`
	// The negotiation mode of IKE V1. Valid value: main (main mode) | aggressive (aggressive mode). Default value: main
	IkeMode *string `pulumi:"ikeMode"`
	// The Diffie-Hellman key exchange algorithm used by phase-one negotiation. Valid value: group1 | group2 | group5 | group14 | group24. Default value: group2
	IkePfs *string `pulumi:"ikePfs"`
	// The identification of the customer gateway.
	IkeRemoteId *string `pulumi:"ikeRemoteId"`
	// The version of the IKE protocol. Valid value: ikev1 | ikev2. Default value: ikev1
	IkeVersion *string `pulumi:"ikeVersion"`
	// Used for authentication between the IPsec VPN gateway and the customer gateway.
	Psk *string `pulumi:"psk"`
}

type ConnectionIkeConfigArgs 

type ConnectionIkeConfigArgs struct {
	// The authentication algorithm of phase-one negotiation. Valid value: md5 | sha1 . Default value: md5
	IkeAuthAlg pulumi.StringPtrInput `pulumi:"ikeAuthAlg"`
	// The encryption algorithm of phase-one negotiation. Valid value: aes | aes192 | aes256 | des | 3des. Default Valid value: aes
	IkeEncAlg pulumi.StringPtrInput `pulumi:"ikeEncAlg"`
	// The SA lifecycle as the result of phase-one negotiation. The valid value of n is [0, 86400], the unit is second and the default value is 86400.
	IkeLifetime pulumi.IntPtrInput `pulumi:"ikeLifetime"`
	// The identification of the VPN gateway.
	IkeLocalId pulumi.StringPtrInput `pulumi:"ikeLocalId"`
	// The negotiation mode of IKE V1. Valid value: main (main mode) | aggressive (aggressive mode). Default value: main
	IkeMode pulumi.StringPtrInput `pulumi:"ikeMode"`
	// The Diffie-Hellman key exchange algorithm used by phase-one negotiation. Valid value: group1 | group2 | group5 | group14 | group24. Default value: group2
	IkePfs pulumi.StringPtrInput `pulumi:"ikePfs"`
	// The identification of the customer gateway.
	IkeRemoteId pulumi.StringPtrInput `pulumi:"ikeRemoteId"`
	// The version of the IKE protocol. Valid value: ikev1 | ikev2. Default value: ikev1
	IkeVersion pulumi.StringPtrInput `pulumi:"ikeVersion"`
	// Used for authentication between the IPsec VPN gateway and the customer gateway.
	Psk pulumi.StringPtrInput `pulumi:"psk"`
}

func (ConnectionIkeConfigArgs) ElementType 

func (ConnectionIkeConfigArgs) ElementType() reflect.Type

func (ConnectionIkeConfigArgs) ToConnectionIkeConfigOutput 

func (i ConnectionIkeConfigArgs) ToConnectionIkeConfigOutput() ConnectionIkeConfigOutput

func (ConnectionIkeConfigArgs) ToConnectionIkeConfigOutputWithContext 

func (i ConnectionIkeConfigArgs) ToConnectionIkeConfigOutputWithContext(ctx context.Context) ConnectionIkeConfigOutput

func (ConnectionIkeConfigArgs) ToConnectionIkeConfigPtrOutput added in v3.20.0 

func (i ConnectionIkeConfigArgs) ToConnectionIkeConfigPtrOutput() ConnectionIkeConfigPtrOutput

func (ConnectionIkeConfigArgs) ToConnectionIkeConfigPtrOutputWithContext added in v3.20.0 

func (i ConnectionIkeConfigArgs) ToConnectionIkeConfigPtrOutputWithContext(ctx context.Context) ConnectionIkeConfigPtrOutput

func (ConnectionIkeConfigArgs) ToOutput added in v3.43.1 

func (i ConnectionIkeConfigArgs) ToOutput(ctx context.Context) pulumix.Output[ConnectionIkeConfig]

type ConnectionIkeConfigInput 

type ConnectionIkeConfigInput interface {
	pulumi.Input

	ToConnectionIkeConfigOutput() ConnectionIkeConfigOutput
	ToConnectionIkeConfigOutputWithContext(context.Context) ConnectionIkeConfigOutput
}

ConnectionIkeConfigInput is an input type that accepts ConnectionIkeConfigArgs and ConnectionIkeConfigOutput values. You can construct a concrete instance of `ConnectionIkeConfigInput` via: 

ConnectionIkeConfigArgs{...}

type ConnectionIkeConfigOutput 

type ConnectionIkeConfigOutput struct{ *pulumi.OutputState }

func (ConnectionIkeConfigOutput) ElementType 

func (ConnectionIkeConfigOutput) ElementType() reflect.Type

func (ConnectionIkeConfigOutput) IkeAuthAlg 

func (o ConnectionIkeConfigOutput) IkeAuthAlg() pulumi.StringPtrOutput

The authentication algorithm of phase-one negotiation. Valid value: md5 | sha1 . Default value: md5

func (ConnectionIkeConfigOutput) IkeEncAlg 

func (o ConnectionIkeConfigOutput) IkeEncAlg() pulumi.StringPtrOutput

The encryption algorithm of phase-one negotiation. Valid value: aes | aes192 | aes256 | des | 3des. Default Valid value: aes

func (ConnectionIkeConfigOutput) IkeLifetime 

func (o ConnectionIkeConfigOutput) IkeLifetime() pulumi.IntPtrOutput

The SA lifecycle as the result of phase-one negotiation. The valid value of n is [0, 86400], the unit is second and the default value is 86400.

func (ConnectionIkeConfigOutput) IkeLocalId 

func (o ConnectionIkeConfigOutput) IkeLocalId() pulumi.StringPtrOutput

The identification of the VPN gateway.

func (ConnectionIkeConfigOutput) IkeMode 

func (o ConnectionIkeConfigOutput) IkeMode() pulumi.StringPtrOutput

The negotiation mode of IKE V1. Valid value: main (main mode) | aggressive (aggressive mode). Default value: main

func (ConnectionIkeConfigOutput) IkePfs 

func (o ConnectionIkeConfigOutput) IkePfs() pulumi.StringPtrOutput

The Diffie-Hellman key exchange algorithm used by phase-one negotiation. Valid value: group1 | group2 | group5 | group14 | group24. Default value: group2

func (ConnectionIkeConfigOutput) IkeRemoteId 

func (o ConnectionIkeConfigOutput) IkeRemoteId() pulumi.StringPtrOutput

The identification of the customer gateway.

func (ConnectionIkeConfigOutput) IkeVersion 

func (o ConnectionIkeConfigOutput) IkeVersion() pulumi.StringPtrOutput

The version of the IKE protocol. Valid value: ikev1 | ikev2. Default value: ikev1

func (ConnectionIkeConfigOutput) Psk 

func (o ConnectionIkeConfigOutput) Psk() pulumi.StringPtrOutput

Used for authentication between the IPsec VPN gateway and the customer gateway.

func (ConnectionIkeConfigOutput) ToConnectionIkeConfigOutput 

func (o ConnectionIkeConfigOutput) ToConnectionIkeConfigOutput() ConnectionIkeConfigOutput

func (ConnectionIkeConfigOutput) ToConnectionIkeConfigOutputWithContext 

func (o ConnectionIkeConfigOutput) ToConnectionIkeConfigOutputWithContext(ctx context.Context) ConnectionIkeConfigOutput

func (ConnectionIkeConfigOutput) ToConnectionIkeConfigPtrOutput added in v3.20.0 

func (o ConnectionIkeConfigOutput) ToConnectionIkeConfigPtrOutput() ConnectionIkeConfigPtrOutput

func (ConnectionIkeConfigOutput) ToConnectionIkeConfigPtrOutputWithContext added in v3.20.0 

func (o ConnectionIkeConfigOutput) ToConnectionIkeConfigPtrOutputWithContext(ctx context.Context) ConnectionIkeConfigPtrOutput

func (ConnectionIkeConfigOutput) ToOutput added in v3.43.1 

func (o ConnectionIkeConfigOutput) ToOutput(ctx context.Context) pulumix.Output[ConnectionIkeConfig]

type ConnectionIkeConfigPtrInput added in v3.20.0 

type ConnectionIkeConfigPtrInput interface {
	pulumi.Input

	ToConnectionIkeConfigPtrOutput() ConnectionIkeConfigPtrOutput
	ToConnectionIkeConfigPtrOutputWithContext(context.Context) ConnectionIkeConfigPtrOutput
}

ConnectionIkeConfigPtrInput is an input type that accepts ConnectionIkeConfigArgs, ConnectionIkeConfigPtr and ConnectionIkeConfigPtrOutput values. You can construct a concrete instance of `ConnectionIkeConfigPtrInput` via: 

        ConnectionIkeConfigArgs{...}

or:

        nil

func ConnectionIkeConfigPtr added in v3.20.0 

func ConnectionIkeConfigPtr(v *ConnectionIkeConfigArgs) ConnectionIkeConfigPtrInput

type ConnectionIkeConfigPtrOutput added in v3.20.0 

type ConnectionIkeConfigPtrOutput struct{ *pulumi.OutputState }

func (ConnectionIkeConfigPtrOutput) Elem added in v3.20.0 

func (o ConnectionIkeConfigPtrOutput) Elem() ConnectionIkeConfigOutput

func (ConnectionIkeConfigPtrOutput) ElementType added in v3.20.0 

func (ConnectionIkeConfigPtrOutput) ElementType() reflect.Type

func (ConnectionIkeConfigPtrOutput) IkeAuthAlg added in v3.20.0 

func (o ConnectionIkeConfigPtrOutput) IkeAuthAlg() pulumi.StringPtrOutput

The authentication algorithm of phase-one negotiation. Valid value: md5 | sha1 . Default value: md5

func (ConnectionIkeConfigPtrOutput) IkeEncAlg added in v3.20.0 

func (o ConnectionIkeConfigPtrOutput) IkeEncAlg() pulumi.StringPtrOutput

The encryption algorithm of phase-one negotiation. Valid value: aes | aes192 | aes256 | des | 3des. Default Valid value: aes

func (ConnectionIkeConfigPtrOutput) IkeLifetime added in v3.20.0 

func (o ConnectionIkeConfigPtrOutput) IkeLifetime() pulumi.IntPtrOutput

The SA lifecycle as the result of phase-one negotiation. The valid value of n is [0, 86400], the unit is second and the default value is 86400.

func (ConnectionIkeConfigPtrOutput) IkeLocalId added in v3.20.0 

func (o ConnectionIkeConfigPtrOutput) IkeLocalId() pulumi.StringPtrOutput

The identification of the VPN gateway.

func (ConnectionIkeConfigPtrOutput) IkeMode added in v3.20.0 

func (o ConnectionIkeConfigPtrOutput) IkeMode() pulumi.StringPtrOutput

The negotiation mode of IKE V1. Valid value: main (main mode) | aggressive (aggressive mode). Default value: main

func (ConnectionIkeConfigPtrOutput) IkePfs added in v3.20.0 

func (o ConnectionIkeConfigPtrOutput) IkePfs() pulumi.StringPtrOutput

The Diffie-Hellman key exchange algorithm used by phase-one negotiation. Valid value: group1 | group2 | group5 | group14 | group24. Default value: group2

func (ConnectionIkeConfigPtrOutput) IkeRemoteId added in v3.20.0 

func (o ConnectionIkeConfigPtrOutput) IkeRemoteId() pulumi.StringPtrOutput

The identification of the customer gateway.

func (ConnectionIkeConfigPtrOutput) IkeVersion added in v3.20.0 

func (o ConnectionIkeConfigPtrOutput) IkeVersion() pulumi.StringPtrOutput

The version of the IKE protocol. Valid value: ikev1 | ikev2. Default value: ikev1

func (ConnectionIkeConfigPtrOutput) Psk added in v3.20.0 

func (o ConnectionIkeConfigPtrOutput) Psk() pulumi.StringPtrOutput

Used for authentication between the IPsec VPN gateway and the customer gateway.

func (ConnectionIkeConfigPtrOutput) ToConnectionIkeConfigPtrOutput added in v3.20.0 

func (o ConnectionIkeConfigPtrOutput) ToConnectionIkeConfigPtrOutput() ConnectionIkeConfigPtrOutput

func (ConnectionIkeConfigPtrOutput) ToConnectionIkeConfigPtrOutputWithContext added in v3.20.0 

func (o ConnectionIkeConfigPtrOutput) ToConnectionIkeConfigPtrOutputWithContext(ctx context.Context) ConnectionIkeConfigPtrOutput

func (ConnectionIkeConfigPtrOutput) ToOutput added in v3.43.1 

func (o ConnectionIkeConfigPtrOutput) ToOutput(ctx context.Context) pulumix.Output[*ConnectionIkeConfig]

type ConnectionInput 

type ConnectionInput interface {
	pulumi.Input

	ToConnectionOutput() ConnectionOutput
	ToConnectionOutputWithContext(ctx context.Context) ConnectionOutput
}

type ConnectionIpsecConfig 

type ConnectionIpsecConfig struct {
	// The authentication algorithm of phase-two negotiation. Valid value: md5 | sha1 | sha256 | sha384 | sha512 |. Default value: sha1
	IpsecAuthAlg *string `pulumi:"ipsecAuthAlg"`
	// The encryption algorithm of phase-two negotiation. Valid value: aes | aes192 | aes256 | des | 3des. Default value: aes
	IpsecEncAlg *string `pulumi:"ipsecEncAlg"`
	// The SA lifecycle as the result of phase-two negotiation. The valid value is [0, 86400], the unit is second and the default value is 86400.
	IpsecLifetime *int `pulumi:"ipsecLifetime"`
	// The Diffie-Hellman key exchange algorithm used by phase-two negotiation. Valid value: group1 | group2 | group5 | group14 | group24| disabled. Default value: group2
	IpsecPfs *string `pulumi:"ipsecPfs"`
}

type ConnectionIpsecConfigArgs 

type ConnectionIpsecConfigArgs struct {
	// The authentication algorithm of phase-two negotiation. Valid value: md5 | sha1 | sha256 | sha384 | sha512 |. Default value: sha1
	IpsecAuthAlg pulumi.StringPtrInput `pulumi:"ipsecAuthAlg"`
	// The encryption algorithm of phase-two negotiation. Valid value: aes | aes192 | aes256 | des | 3des. Default value: aes
	IpsecEncAlg pulumi.StringPtrInput `pulumi:"ipsecEncAlg"`
	// The SA lifecycle as the result of phase-two negotiation. The valid value is [0, 86400], the unit is second and the default value is 86400.
	IpsecLifetime pulumi.IntPtrInput `pulumi:"ipsecLifetime"`
	// The Diffie-Hellman key exchange algorithm used by phase-two negotiation. Valid value: group1 | group2 | group5 | group14 | group24| disabled. Default value: group2
	IpsecPfs pulumi.StringPtrInput `pulumi:"ipsecPfs"`
}

func (ConnectionIpsecConfigArgs) ElementType 

func (ConnectionIpsecConfigArgs) ElementType() reflect.Type

func (ConnectionIpsecConfigArgs) ToConnectionIpsecConfigOutput 

func (i ConnectionIpsecConfigArgs) ToConnectionIpsecConfigOutput() ConnectionIpsecConfigOutput

func (ConnectionIpsecConfigArgs) ToConnectionIpsecConfigOutputWithContext 

func (i ConnectionIpsecConfigArgs) ToConnectionIpsecConfigOutputWithContext(ctx context.Context) ConnectionIpsecConfigOutput

func (ConnectionIpsecConfigArgs) ToConnectionIpsecConfigPtrOutput added in v3.20.0 

func (i ConnectionIpsecConfigArgs) ToConnectionIpsecConfigPtrOutput() ConnectionIpsecConfigPtrOutput

func (ConnectionIpsecConfigArgs) ToConnectionIpsecConfigPtrOutputWithContext added in v3.20.0 

func (i ConnectionIpsecConfigArgs) ToConnectionIpsecConfigPtrOutputWithContext(ctx context.Context) ConnectionIpsecConfigPtrOutput

func (ConnectionIpsecConfigArgs) ToOutput added in v3.43.1 

func (i ConnectionIpsecConfigArgs) ToOutput(ctx context.Context) pulumix.Output[ConnectionIpsecConfig]

type ConnectionIpsecConfigInput 

type ConnectionIpsecConfigInput interface {
	pulumi.Input

	ToConnectionIpsecConfigOutput() ConnectionIpsecConfigOutput
	ToConnectionIpsecConfigOutputWithContext(context.Context) ConnectionIpsecConfigOutput
}

ConnectionIpsecConfigInput is an input type that accepts ConnectionIpsecConfigArgs and ConnectionIpsecConfigOutput values. You can construct a concrete instance of `ConnectionIpsecConfigInput` via: 

ConnectionIpsecConfigArgs{...}

type ConnectionIpsecConfigOutput 

type ConnectionIpsecConfigOutput struct{ *pulumi.OutputState }

func (ConnectionIpsecConfigOutput) ElementType 

func (ConnectionIpsecConfigOutput) ElementType() reflect.Type

func (ConnectionIpsecConfigOutput) IpsecAuthAlg 

func (o ConnectionIpsecConfigOutput) IpsecAuthAlg() pulumi.StringPtrOutput

The authentication algorithm of phase-two negotiation. Valid value: md5 | sha1 | sha256 | sha384 | sha512 |. Default value: sha1

func (ConnectionIpsecConfigOutput) IpsecEncAlg 

func (o ConnectionIpsecConfigOutput) IpsecEncAlg() pulumi.StringPtrOutput

The encryption algorithm of phase-two negotiation. Valid value: aes | aes192 | aes256 | des | 3des. Default value: aes

func (ConnectionIpsecConfigOutput) IpsecLifetime 

func (o ConnectionIpsecConfigOutput) IpsecLifetime() pulumi.IntPtrOutput

The SA lifecycle as the result of phase-two negotiation. The valid value is [0, 86400], the unit is second and the default value is 86400.

func (ConnectionIpsecConfigOutput) IpsecPfs 

func (o ConnectionIpsecConfigOutput) IpsecPfs() pulumi.StringPtrOutput

The Diffie-Hellman key exchange algorithm used by phase-two negotiation. Valid value: group1 | group2 | group5 | group14 | group24| disabled. Default value: group2

func (ConnectionIpsecConfigOutput) ToConnectionIpsecConfigOutput 

func (o ConnectionIpsecConfigOutput) ToConnectionIpsecConfigOutput() ConnectionIpsecConfigOutput

func (ConnectionIpsecConfigOutput) ToConnectionIpsecConfigOutputWithContext 

func (o ConnectionIpsecConfigOutput) ToConnectionIpsecConfigOutputWithContext(ctx context.Context) ConnectionIpsecConfigOutput

func (ConnectionIpsecConfigOutput) ToConnectionIpsecConfigPtrOutput added in v3.20.0 

func (o ConnectionIpsecConfigOutput) ToConnectionIpsecConfigPtrOutput() ConnectionIpsecConfigPtrOutput

func (ConnectionIpsecConfigOutput) ToConnectionIpsecConfigPtrOutputWithContext added in v3.20.0 

func (o ConnectionIpsecConfigOutput) ToConnectionIpsecConfigPtrOutputWithContext(ctx context.Context) ConnectionIpsecConfigPtrOutput

func (ConnectionIpsecConfigOutput) ToOutput added in v3.43.1 

func (o ConnectionIpsecConfigOutput) ToOutput(ctx context.Context) pulumix.Output[ConnectionIpsecConfig]

type ConnectionIpsecConfigPtrInput added in v3.20.0 

type ConnectionIpsecConfigPtrInput interface {
	pulumi.Input

	ToConnectionIpsecConfigPtrOutput() ConnectionIpsecConfigPtrOutput
	ToConnectionIpsecConfigPtrOutputWithContext(context.Context) ConnectionIpsecConfigPtrOutput
}

ConnectionIpsecConfigPtrInput is an input type that accepts ConnectionIpsecConfigArgs, ConnectionIpsecConfigPtr and ConnectionIpsecConfigPtrOutput values. You can construct a concrete instance of `ConnectionIpsecConfigPtrInput` via: 

        ConnectionIpsecConfigArgs{...}

or:

        nil

func ConnectionIpsecConfigPtr added in v3.20.0 

func ConnectionIpsecConfigPtr(v *ConnectionIpsecConfigArgs) ConnectionIpsecConfigPtrInput

type ConnectionIpsecConfigPtrOutput added in v3.20.0 

type ConnectionIpsecConfigPtrOutput struct{ *pulumi.OutputState }

func (ConnectionIpsecConfigPtrOutput) Elem added in v3.20.0 

func (o ConnectionIpsecConfigPtrOutput) Elem() ConnectionIpsecConfigOutput

func (ConnectionIpsecConfigPtrOutput) ElementType added in v3.20.0 

func (ConnectionIpsecConfigPtrOutput) ElementType() reflect.Type

func (ConnectionIpsecConfigPtrOutput) IpsecAuthAlg added in v3.20.0 

func (o ConnectionIpsecConfigPtrOutput) IpsecAuthAlg() pulumi.StringPtrOutput

The authentication algorithm of phase-two negotiation. Valid value: md5 | sha1 | sha256 | sha384 | sha512 |. Default value: sha1

func (ConnectionIpsecConfigPtrOutput) IpsecEncAlg added in v3.20.0 

func (o ConnectionIpsecConfigPtrOutput) IpsecEncAlg() pulumi.StringPtrOutput

The encryption algorithm of phase-two negotiation. Valid value: aes | aes192 | aes256 | des | 3des. Default value: aes

func (ConnectionIpsecConfigPtrOutput) IpsecLifetime added in v3.20.0 

func (o ConnectionIpsecConfigPtrOutput) IpsecLifetime() pulumi.IntPtrOutput

The SA lifecycle as the result of phase-two negotiation. The valid value is [0, 86400], the unit is second and the default value is 86400.

func (ConnectionIpsecConfigPtrOutput) IpsecPfs added in v3.20.0 

func (o ConnectionIpsecConfigPtrOutput) IpsecPfs() pulumi.StringPtrOutput

The Diffie-Hellman key exchange algorithm used by phase-two negotiation. Valid value: group1 | group2 | group5 | group14 | group24| disabled. Default value: group2

func (ConnectionIpsecConfigPtrOutput) ToConnectionIpsecConfigPtrOutput added in v3.20.0 

func (o ConnectionIpsecConfigPtrOutput) ToConnectionIpsecConfigPtrOutput() ConnectionIpsecConfigPtrOutput

func (ConnectionIpsecConfigPtrOutput) ToConnectionIpsecConfigPtrOutputWithContext added in v3.20.0 

func (o ConnectionIpsecConfigPtrOutput) ToConnectionIpsecConfigPtrOutputWithContext(ctx context.Context) ConnectionIpsecConfigPtrOutput

func (ConnectionIpsecConfigPtrOutput) ToOutput added in v3.43.1 

func (o ConnectionIpsecConfigPtrOutput) ToOutput(ctx context.Context) pulumix.Output[*ConnectionIpsecConfig]

type ConnectionMap 

type ConnectionMap map[string]ConnectionInput

func (ConnectionMap) ElementType 

func (ConnectionMap) ElementType() reflect.Type

func (ConnectionMap) ToConnectionMapOutput 

func (i ConnectionMap) ToConnectionMapOutput() ConnectionMapOutput

func (ConnectionMap) ToConnectionMapOutputWithContext 

func (i ConnectionMap) ToConnectionMapOutputWithContext(ctx context.Context) ConnectionMapOutput

func (ConnectionMap) ToOutput added in v3.43.1 

func (i ConnectionMap) ToOutput(ctx context.Context) pulumix.Output[map[string]*Connection]

type ConnectionMapInput 

type ConnectionMapInput interface {
	pulumi.Input

	ToConnectionMapOutput() ConnectionMapOutput
	ToConnectionMapOutputWithContext(context.Context) ConnectionMapOutput
}

ConnectionMapInput is an input type that accepts ConnectionMap and ConnectionMapOutput values. You can construct a concrete instance of `ConnectionMapInput` via: 

ConnectionMap{ "key": ConnectionArgs{...} }

type ConnectionMapOutput 

type ConnectionMapOutput struct{ *pulumi.OutputState }

func (ConnectionMapOutput) ElementType 

func (ConnectionMapOutput) ElementType() reflect.Type

func (ConnectionMapOutput) MapIndex 

func (o ConnectionMapOutput) MapIndex(k pulumi.StringInput) ConnectionOutput

func (ConnectionMapOutput) ToConnectionMapOutput 

func (o ConnectionMapOutput) ToConnectionMapOutput() ConnectionMapOutput

func (ConnectionMapOutput) ToConnectionMapOutputWithContext 

func (o ConnectionMapOutput) ToConnectionMapOutputWithContext(ctx context.Context) ConnectionMapOutput

func (ConnectionMapOutput) ToOutput added in v3.43.1 

func (o ConnectionMapOutput) ToOutput(ctx context.Context) pulumix.Output[map[string]*Connection]

type ConnectionOutput 

type ConnectionOutput struct{ *pulumi.OutputState }

func (ConnectionOutput) BgpConfig added in v3.27.0 

func (o ConnectionOutput) BgpConfig() ConnectionBgpConfigOutput

The configurations of the BGP routing protocol. See the following `Block bgpConfig`.

func (ConnectionOutput) CustomerGatewayId added in v3.27.0 

func (o ConnectionOutput) CustomerGatewayId() pulumi.StringOutput

The ID of the customer gateway.

func (ConnectionOutput) EffectImmediately added in v3.27.0 

func (o ConnectionOutput) EffectImmediately() pulumi.BoolPtrOutput

Whether to delete a successfully negotiated IPsec tunnel and initiate a negotiation again. Valid value:true,false.

func (ConnectionOutput) ElementType 

func (ConnectionOutput) ElementType() reflect.Type

func (ConnectionOutput) EnableDpd added in v3.27.0 

func (o ConnectionOutput) EnableDpd() pulumi.BoolOutput

Specifies whether to enable the dead peer detection (DPD) feature. Valid values: `true`(default), `false`.

func (ConnectionOutput) EnableNatTraversal added in v3.27.0 

func (o ConnectionOutput) EnableNatTraversal() pulumi.BoolOutput

Specifies whether to enable NAT traversal. Valid values: `true`(default), `false`.

func (ConnectionOutput) HealthCheckConfig added in v3.27.0 

func (o ConnectionOutput) HealthCheckConfig() ConnectionHealthCheckConfigOutput

The health check configurations. See the following `Block healthCheckConfig`.

func (ConnectionOutput) IkeConfig added in v3.27.0 

func (o ConnectionOutput) IkeConfig() ConnectionIkeConfigOutput

The configurations of phase-one negotiation. See the following `Block ikeConfig`.

func (ConnectionOutput) IpsecConfig added in v3.27.0 

func (o ConnectionOutput) IpsecConfig() ConnectionIpsecConfigOutput

The configurations of phase-two negotiation. See the following `Block ipsecConfig`.

func (ConnectionOutput) LocalSubnets added in v3.27.0 

func (o ConnectionOutput) LocalSubnets() pulumi.StringArrayOutput

The CIDR block of the VPC to be connected with the local data center. This parameter is used for phase-two negotiation.

func (ConnectionOutput) Name added in v3.27.0 

func (o ConnectionOutput) Name() pulumi.StringOutput

The name of the IPsec connection.

func (ConnectionOutput) RemoteSubnets added in v3.27.0 

func (o ConnectionOutput) RemoteSubnets() pulumi.StringArrayOutput

The CIDR block of the local data center. This parameter is used for phase-two negotiation.

func (ConnectionOutput) Status added in v3.27.0 

func (o ConnectionOutput) Status() pulumi.StringOutput

The status of VPN connection.

func (ConnectionOutput) ToConnectionOutput 

func (o ConnectionOutput) ToConnectionOutput() ConnectionOutput

func (ConnectionOutput) ToConnectionOutputWithContext 

func (o ConnectionOutput) ToConnectionOutputWithContext(ctx context.Context) ConnectionOutput

func (ConnectionOutput) ToOutput added in v3.43.1 

func (o ConnectionOutput) ToOutput(ctx context.Context) pulumix.Output[*Connection]

func (ConnectionOutput) VpnGatewayId added in v3.27.0 

func (o ConnectionOutput) VpnGatewayId() pulumi.StringOutput

The ID of the VPN gateway.

type ConnectionState 

type ConnectionState struct {
	// The configurations of the BGP routing protocol. See the following `Block bgpConfig`.
	BgpConfig ConnectionBgpConfigPtrInput
	// The ID of the customer gateway.
	CustomerGatewayId pulumi.StringPtrInput
	// Whether to delete a successfully negotiated IPsec tunnel and initiate a negotiation again. Valid value:true,false.
	EffectImmediately pulumi.BoolPtrInput
	// Specifies whether to enable the dead peer detection (DPD) feature. Valid values: `true`(default), `false`.
	EnableDpd pulumi.BoolPtrInput
	// Specifies whether to enable NAT traversal. Valid values: `true`(default), `false`.
	EnableNatTraversal pulumi.BoolPtrInput
	// The health check configurations. See the following `Block healthCheckConfig`.
	HealthCheckConfig ConnectionHealthCheckConfigPtrInput
	// The configurations of phase-one negotiation. See the following `Block ikeConfig`.
	IkeConfig ConnectionIkeConfigPtrInput
	// The configurations of phase-two negotiation. See the following `Block ipsecConfig`.
	IpsecConfig ConnectionIpsecConfigPtrInput
	// The CIDR block of the VPC to be connected with the local data center. This parameter is used for phase-two negotiation.
	LocalSubnets pulumi.StringArrayInput
	// The name of the IPsec connection.
	Name pulumi.StringPtrInput
	// The CIDR block of the local data center. This parameter is used for phase-two negotiation.
	RemoteSubnets pulumi.StringArrayInput
	// The status of VPN connection.
	Status pulumi.StringPtrInput
	// The ID of the VPN gateway.
	VpnGatewayId pulumi.StringPtrInput
}

func (ConnectionState) ElementType 

func (ConnectionState) ElementType() reflect.Type

type CustomerGateway 

type CustomerGateway struct {
	pulumi.CustomResourceState

	// The autonomous system number of the gateway device in the data center. The `asn` is a 4-byte number. You can enter the number in two segments and separate the first 16 bits from the following 16 bits with a period (.). Enter the number in each segment in the decimal format.
	Asn pulumi.StringPtrOutput `pulumi:"asn"`
	// The description of the VPN customer gateway instance.
	Description pulumi.StringPtrOutput `pulumi:"description"`
	// The IP address of the customer gateway.
	IpAddress pulumi.StringOutput `pulumi:"ipAddress"`
	// The name of the VPN customer gateway. Defaults to null.
	Name pulumi.StringOutput `pulumi:"name"`
}

## Example Usage

Basic Usage

```go package main

import ( 

"github.com/pulumi/pulumi-alicloud/sdk/v3/go/alicloud/vpn"
"github.com/pulumi/pulumi/sdk/v3/go/pulumi"

) 

func main() {
	pulumi.Run(func(ctx *pulumi.Context) error {
		_, err := vpn.NewCustomerGateway(ctx, "foo", &vpn.CustomerGatewayArgs{
			Description: pulumi.String("vpnCgwDescriptionExample"),
			IpAddress:   pulumi.String("43.104.22.228"),
		})
		if err != nil {
			return err
		}
		return nil
	})
}

```

## Import

VPN customer gateway can be imported using the id, e.g.

```sh 

$ pulumi import alicloud:vpn/customerGateway:CustomerGateway example cgw-abc123456

```

func GetCustomerGateway 

func GetCustomerGateway(ctx *pulumi.Context,
	name string, id pulumi.IDInput, state *CustomerGatewayState, opts ...pulumi.ResourceOption) (*CustomerGateway, error)

GetCustomerGateway gets an existing CustomerGateway resource's state with the given name, ID, and optional state properties that are used to uniquely qualify the lookup (nil if not required).

func NewCustomerGateway 

func NewCustomerGateway(ctx *pulumi.Context,
	name string, args *CustomerGatewayArgs, opts ...pulumi.ResourceOption) (*CustomerGateway, error)

NewCustomerGateway registers a new resource with the given unique name, arguments, and options.

func (*CustomerGateway) ElementType 

func (*CustomerGateway) ElementType() reflect.Type

func (*CustomerGateway) ToCustomerGatewayOutput 

func (i *CustomerGateway) ToCustomerGatewayOutput() CustomerGatewayOutput

func (*CustomerGateway) ToCustomerGatewayOutputWithContext 

func (i *CustomerGateway) ToCustomerGatewayOutputWithContext(ctx context.Context) CustomerGatewayOutput

func (*CustomerGateway) ToOutput added in v3.43.1 

func (i *CustomerGateway) ToOutput(ctx context.Context) pulumix.Output[*CustomerGateway]

type CustomerGatewayArgs 

type CustomerGatewayArgs struct {
	// The autonomous system number of the gateway device in the data center. The `asn` is a 4-byte number. You can enter the number in two segments and separate the first 16 bits from the following 16 bits with a period (.). Enter the number in each segment in the decimal format.
	Asn pulumi.StringPtrInput
	// The description of the VPN customer gateway instance.
	Description pulumi.StringPtrInput
	// The IP address of the customer gateway.
	IpAddress pulumi.StringInput
	// The name of the VPN customer gateway. Defaults to null.
	Name pulumi.StringPtrInput
}

The set of arguments for constructing a CustomerGateway resource.

func (CustomerGatewayArgs) ElementType 

func (CustomerGatewayArgs) ElementType() reflect.Type

type CustomerGatewayArray 

type CustomerGatewayArray []CustomerGatewayInput

func (CustomerGatewayArray) ElementType 

func (CustomerGatewayArray) ElementType() reflect.Type

func (CustomerGatewayArray) ToCustomerGatewayArrayOutput 

func (i CustomerGatewayArray) ToCustomerGatewayArrayOutput() CustomerGatewayArrayOutput

func (CustomerGatewayArray) ToCustomerGatewayArrayOutputWithContext 

func (i CustomerGatewayArray) ToCustomerGatewayArrayOutputWithContext(ctx context.Context) CustomerGatewayArrayOutput

func (CustomerGatewayArray) ToOutput added in v3.43.1 

func (i CustomerGatewayArray) ToOutput(ctx context.Context) pulumix.Output[[]*CustomerGateway]

type CustomerGatewayArrayInput 

type CustomerGatewayArrayInput interface {
	pulumi.Input

	ToCustomerGatewayArrayOutput() CustomerGatewayArrayOutput
	ToCustomerGatewayArrayOutputWithContext(context.Context) CustomerGatewayArrayOutput
}

CustomerGatewayArrayInput is an input type that accepts CustomerGatewayArray and CustomerGatewayArrayOutput values. You can construct a concrete instance of `CustomerGatewayArrayInput` via: 

CustomerGatewayArray{ CustomerGatewayArgs{...} }

type CustomerGatewayArrayOutput 

type CustomerGatewayArrayOutput struct{ *pulumi.OutputState }

func (CustomerGatewayArrayOutput) ElementType 

func (CustomerGatewayArrayOutput) ElementType() reflect.Type

func (CustomerGatewayArrayOutput) Index 

func (o CustomerGatewayArrayOutput) Index(i pulumi.IntInput) CustomerGatewayOutput

func (CustomerGatewayArrayOutput) ToCustomerGatewayArrayOutput 

func (o CustomerGatewayArrayOutput) ToCustomerGatewayArrayOutput() CustomerGatewayArrayOutput

func (CustomerGatewayArrayOutput) ToCustomerGatewayArrayOutputWithContext 

func (o CustomerGatewayArrayOutput) ToCustomerGatewayArrayOutputWithContext(ctx context.Context) CustomerGatewayArrayOutput

func (CustomerGatewayArrayOutput) ToOutput added in v3.43.1 

func (o CustomerGatewayArrayOutput) ToOutput(ctx context.Context) pulumix.Output[[]*CustomerGateway]

type CustomerGatewayInput 

type CustomerGatewayInput interface {
	pulumi.Input

	ToCustomerGatewayOutput() CustomerGatewayOutput
	ToCustomerGatewayOutputWithContext(ctx context.Context) CustomerGatewayOutput
}

type CustomerGatewayMap 

type CustomerGatewayMap map[string]CustomerGatewayInput

func (CustomerGatewayMap) ElementType 

func (CustomerGatewayMap) ElementType() reflect.Type

func (CustomerGatewayMap) ToCustomerGatewayMapOutput 

func (i CustomerGatewayMap) ToCustomerGatewayMapOutput() CustomerGatewayMapOutput

func (CustomerGatewayMap) ToCustomerGatewayMapOutputWithContext 

func (i CustomerGatewayMap) ToCustomerGatewayMapOutputWithContext(ctx context.Context) CustomerGatewayMapOutput

func (CustomerGatewayMap) ToOutput added in v3.43.1 

func (i CustomerGatewayMap) ToOutput(ctx context.Context) pulumix.Output[map[string]*CustomerGateway]

type CustomerGatewayMapInput 

type CustomerGatewayMapInput interface {
	pulumi.Input

	ToCustomerGatewayMapOutput() CustomerGatewayMapOutput
	ToCustomerGatewayMapOutputWithContext(context.Context) CustomerGatewayMapOutput
}

CustomerGatewayMapInput is an input type that accepts CustomerGatewayMap and CustomerGatewayMapOutput values. You can construct a concrete instance of `CustomerGatewayMapInput` via: 

CustomerGatewayMap{ "key": CustomerGatewayArgs{...} }

type CustomerGatewayMapOutput 

type CustomerGatewayMapOutput struct{ *pulumi.OutputState }

func (CustomerGatewayMapOutput) ElementType 

func (CustomerGatewayMapOutput) ElementType() reflect.Type

func (CustomerGatewayMapOutput) MapIndex 

func (o CustomerGatewayMapOutput) MapIndex(k pulumi.StringInput) CustomerGatewayOutput

func (CustomerGatewayMapOutput) ToCustomerGatewayMapOutput 

func (o CustomerGatewayMapOutput) ToCustomerGatewayMapOutput() CustomerGatewayMapOutput

func (CustomerGatewayMapOutput) ToCustomerGatewayMapOutputWithContext 

func (o CustomerGatewayMapOutput) ToCustomerGatewayMapOutputWithContext(ctx context.Context) CustomerGatewayMapOutput

func (CustomerGatewayMapOutput) ToOutput added in v3.43.1 

func (o CustomerGatewayMapOutput) ToOutput(ctx context.Context) pulumix.Output[map[string]*CustomerGateway]

type CustomerGatewayOutput 

type CustomerGatewayOutput struct{ *pulumi.OutputState }

func (CustomerGatewayOutput) Asn added in v3.27.0 

func (o CustomerGatewayOutput) Asn() pulumi.StringPtrOutput

The autonomous system number of the gateway device in the data center. The `asn` is a 4-byte number. You can enter the number in two segments and separate the first 16 bits from the following 16 bits with a period (.). Enter the number in each segment in the decimal format.

func (CustomerGatewayOutput) Description added in v3.27.0 

func (o CustomerGatewayOutput) Description() pulumi.StringPtrOutput

The description of the VPN customer gateway instance.

func (CustomerGatewayOutput) ElementType 

func (CustomerGatewayOutput) ElementType() reflect.Type

func (CustomerGatewayOutput) IpAddress added in v3.27.0 

func (o CustomerGatewayOutput) IpAddress() pulumi.StringOutput

The IP address of the customer gateway.

func (CustomerGatewayOutput) Name added in v3.27.0 

func (o CustomerGatewayOutput) Name() pulumi.StringOutput

The name of the VPN customer gateway. Defaults to null.

func (CustomerGatewayOutput) ToCustomerGatewayOutput 

func (o CustomerGatewayOutput) ToCustomerGatewayOutput() CustomerGatewayOutput

func (CustomerGatewayOutput) ToCustomerGatewayOutputWithContext 

func (o CustomerGatewayOutput) ToCustomerGatewayOutputWithContext(ctx context.Context) CustomerGatewayOutput

func (CustomerGatewayOutput) ToOutput added in v3.43.1 

func (o CustomerGatewayOutput) ToOutput(ctx context.Context) pulumix.Output[*CustomerGateway]

type CustomerGatewayState 

type CustomerGatewayState struct {
	// The autonomous system number of the gateway device in the data center. The `asn` is a 4-byte number. You can enter the number in two segments and separate the first 16 bits from the following 16 bits with a period (.). Enter the number in each segment in the decimal format.
	Asn pulumi.StringPtrInput
	// The description of the VPN customer gateway instance.
	Description pulumi.StringPtrInput
	// The IP address of the customer gateway.
	IpAddress pulumi.StringPtrInput
	// The name of the VPN customer gateway. Defaults to null.
	Name pulumi.StringPtrInput
}

func (CustomerGatewayState) ElementType 

func (CustomerGatewayState) ElementType() reflect.Type

type Gateway 

type Gateway struct {
	pulumi.CustomResourceState

	// Whether to pay automatically. Default value: `true`. Valid values:
	AutoPay pulumi.BoolPtrOutput `pulumi:"autoPay"`
	// Specifies whether to automatically advertise BGP routes to the virtual private cloud (VPC). Valid values:
	AutoPropagate pulumi.BoolPtrOutput `pulumi:"autoPropagate"`
	Bandwidth     pulumi.IntOutput     `pulumi:"bandwidth"`
	// The business status of the VPN gateway.
	BusinessStatus pulumi.StringOutput `pulumi:"businessStatus"`
	// The description of the VPN instance.
	Description pulumi.StringPtrOutput `pulumi:"description"`
	// Enable or Disable IPSec VPN. At least one type of VPN should be enabled.
	EnableIpsec pulumi.BoolPtrOutput `pulumi:"enableIpsec"`
	// Enable or Disable SSL VPN.  At least one type of VPN should be enabled.
	EnableSsl pulumi.BoolPtrOutput `pulumi:"enableSsl"`
	// The charge type for instance. If it is an international site account, the valid value is PostPaid, otherwise PrePaid.
	// Default to PostPaid.
	InstanceChargeType pulumi.StringPtrOutput `pulumi:"instanceChargeType"`
	// The internet ip of the VPN.
	InternetIp pulumi.StringOutput `pulumi:"internetIp"`
	// The name of the VPN. Defaults to null.
	Name pulumi.StringOutput `pulumi:"name"`
	// The network type of the VPN gateway. Value:
	// - public (default): Public VPN gateway.
	// - private: Private VPN gateway.
	//
	// > **NOTE:** Private VPN gateway can only be purchased by white list users, and the bandwidth only supports 200M or 1000M; In addition, SSL is not supported.
	NetworkType pulumi.StringOutput `pulumi:"networkType"`
	// The filed is only required while the InstanceChargeType is PrePaid. Valid values: [1-9, 12, 24, 36]. Default to 1.
	Period pulumi.IntPtrOutput `pulumi:"period"`
	// The max connections of SSL VPN. Default to 5. The number of connections supported by each account is different.
	// This field is ignored when enableSsl is false.
	SslConnections pulumi.IntPtrOutput `pulumi:"sslConnections"`
	// The status of the VPN gateway.
	Status pulumi.StringOutput `pulumi:"status"`
	// The tags of VPN gateway.
	Tags pulumi.MapOutput `pulumi:"tags"`
	// The VPN belongs the vpc_id, the field can't be changed.
	VpcId pulumi.StringOutput `pulumi:"vpcId"`
	// The VPN belongs the vswitch_id, the field can't be changed.
	VswitchId pulumi.StringOutput `pulumi:"vswitchId"`
}

## Import

VPN gateway can be imported using the id, e.g.

```sh 

$ pulumi import alicloud:vpn/gateway:Gateway example vpn-abc123456

```

func GetGateway 

func GetGateway(ctx *pulumi.Context,
	name string, id pulumi.IDInput, state *GatewayState, opts ...pulumi.ResourceOption) (*Gateway, error)

GetGateway gets an existing Gateway resource's state with the given name, ID, and optional state properties that are used to uniquely qualify the lookup (nil if not required).

func NewGateway 

func NewGateway(ctx *pulumi.Context,
	name string, args *GatewayArgs, opts ...pulumi.ResourceOption) (*Gateway, error)

NewGateway registers a new resource with the given unique name, arguments, and options.

func (*Gateway) ElementType 

func (*Gateway) ElementType() reflect.Type

func (*Gateway) ToGatewayOutput 

func (i *Gateway) ToGatewayOutput() GatewayOutput

func (*Gateway) ToGatewayOutputWithContext 

func (i *Gateway) ToGatewayOutputWithContext(ctx context.Context) GatewayOutput

func (*Gateway) ToOutput added in v3.43.1 

func (i *Gateway) ToOutput(ctx context.Context) pulumix.Output[*Gateway]

type GatewayArgs 

type GatewayArgs struct {
	// Whether to pay automatically. Default value: `true`. Valid values:
	AutoPay pulumi.BoolPtrInput
	// Specifies whether to automatically advertise BGP routes to the virtual private cloud (VPC). Valid values:
	AutoPropagate pulumi.BoolPtrInput
	Bandwidth     pulumi.IntInput
	// The description of the VPN instance.
	Description pulumi.StringPtrInput
	// Enable or Disable IPSec VPN. At least one type of VPN should be enabled.
	EnableIpsec pulumi.BoolPtrInput
	// Enable or Disable SSL VPN.  At least one type of VPN should be enabled.
	EnableSsl pulumi.BoolPtrInput
	// The charge type for instance. If it is an international site account, the valid value is PostPaid, otherwise PrePaid.
	// Default to PostPaid.
	InstanceChargeType pulumi.StringPtrInput
	// The name of the VPN. Defaults to null.
	Name pulumi.StringPtrInput
	// The network type of the VPN gateway. Value:
	// - public (default): Public VPN gateway.
	// - private: Private VPN gateway.
	//
	// > **NOTE:** Private VPN gateway can only be purchased by white list users, and the bandwidth only supports 200M or 1000M; In addition, SSL is not supported.
	NetworkType pulumi.StringPtrInput
	// The filed is only required while the InstanceChargeType is PrePaid. Valid values: [1-9, 12, 24, 36]. Default to 1.
	Period pulumi.IntPtrInput
	// The max connections of SSL VPN. Default to 5. The number of connections supported by each account is different.
	// This field is ignored when enableSsl is false.
	SslConnections pulumi.IntPtrInput
	// The tags of VPN gateway.
	Tags pulumi.MapInput
	// The VPN belongs the vpc_id, the field can't be changed.
	VpcId pulumi.StringInput
	// The VPN belongs the vswitch_id, the field can't be changed.
	VswitchId pulumi.StringPtrInput
}

The set of arguments for constructing a Gateway resource.

func (GatewayArgs) ElementType 

func (GatewayArgs) ElementType() reflect.Type

type GatewayArray 

type GatewayArray []GatewayInput

func (GatewayArray) ElementType 

func (GatewayArray) ElementType() reflect.Type

func (GatewayArray) ToGatewayArrayOutput 

func (i GatewayArray) ToGatewayArrayOutput() GatewayArrayOutput

func (GatewayArray) ToGatewayArrayOutputWithContext 

func (i GatewayArray) ToGatewayArrayOutputWithContext(ctx context.Context) GatewayArrayOutput

func (GatewayArray) ToOutput added in v3.43.1 

func (i GatewayArray) ToOutput(ctx context.Context) pulumix.Output[[]*Gateway]

type GatewayArrayInput 

type GatewayArrayInput interface {
	pulumi.Input

	ToGatewayArrayOutput() GatewayArrayOutput
	ToGatewayArrayOutputWithContext(context.Context) GatewayArrayOutput
}

GatewayArrayInput is an input type that accepts GatewayArray and GatewayArrayOutput values. You can construct a concrete instance of `GatewayArrayInput` via: 

GatewayArray{ GatewayArgs{...} }

type GatewayArrayOutput 

type GatewayArrayOutput struct{ *pulumi.OutputState }

func (GatewayArrayOutput) ElementType 

func (GatewayArrayOutput) ElementType() reflect.Type

func (GatewayArrayOutput) Index 

func (o GatewayArrayOutput) Index(i pulumi.IntInput) GatewayOutput

func (GatewayArrayOutput) ToGatewayArrayOutput 

func (o GatewayArrayOutput) ToGatewayArrayOutput() GatewayArrayOutput

func (GatewayArrayOutput) ToGatewayArrayOutputWithContext 

func (o GatewayArrayOutput) ToGatewayArrayOutputWithContext(ctx context.Context) GatewayArrayOutput

func (GatewayArrayOutput) ToOutput added in v3.43.1 

func (o GatewayArrayOutput) ToOutput(ctx context.Context) pulumix.Output[[]*Gateway]

type GatewayInput 

type GatewayInput interface {
	pulumi.Input

	ToGatewayOutput() GatewayOutput
	ToGatewayOutputWithContext(ctx context.Context) GatewayOutput
}

type GatewayMap 

type GatewayMap map[string]GatewayInput

func (GatewayMap) ElementType 

func (GatewayMap) ElementType() reflect.Type

func (GatewayMap) ToGatewayMapOutput 

func (i GatewayMap) ToGatewayMapOutput() GatewayMapOutput

func (GatewayMap) ToGatewayMapOutputWithContext 

func (i GatewayMap) ToGatewayMapOutputWithContext(ctx context.Context) GatewayMapOutput

func (GatewayMap) ToOutput added in v3.43.1 

func (i GatewayMap) ToOutput(ctx context.Context) pulumix.Output[map[string]*Gateway]

type GatewayMapInput 

type GatewayMapInput interface {
	pulumi.Input

	ToGatewayMapOutput() GatewayMapOutput
	ToGatewayMapOutputWithContext(context.Context) GatewayMapOutput
}

GatewayMapInput is an input type that accepts GatewayMap and GatewayMapOutput values. You can construct a concrete instance of `GatewayMapInput` via: 

GatewayMap{ "key": GatewayArgs{...} }

type GatewayMapOutput 

type GatewayMapOutput struct{ *pulumi.OutputState }

func (GatewayMapOutput) ElementType 

func (GatewayMapOutput) ElementType() reflect.Type

func (GatewayMapOutput) MapIndex 

func (o GatewayMapOutput) MapIndex(k pulumi.StringInput) GatewayOutput

func (GatewayMapOutput) ToGatewayMapOutput 

func (o GatewayMapOutput) ToGatewayMapOutput() GatewayMapOutput

func (GatewayMapOutput) ToGatewayMapOutputWithContext 

func (o GatewayMapOutput) ToGatewayMapOutputWithContext(ctx context.Context) GatewayMapOutput

func (GatewayMapOutput) ToOutput added in v3.43.1 

func (o GatewayMapOutput) ToOutput(ctx context.Context) pulumix.Output[map[string]*Gateway]

type GatewayOutput 

type GatewayOutput struct{ *pulumi.OutputState }

func (GatewayOutput) AutoPay added in v3.27.0 

func (o GatewayOutput) AutoPay() pulumi.BoolPtrOutput

Whether to pay automatically. Default value: `true`. Valid values:

func (GatewayOutput) AutoPropagate added in v3.29.0 

func (o GatewayOutput) AutoPropagate() pulumi.BoolPtrOutput

Specifies whether to automatically advertise BGP routes to the virtual private cloud (VPC). Valid values:

func (GatewayOutput) Bandwidth added in v3.27.0 

func (o GatewayOutput) Bandwidth() pulumi.IntOutput

func (GatewayOutput) BusinessStatus added in v3.27.0 

func (o GatewayOutput) BusinessStatus() pulumi.StringOutput

The business status of the VPN gateway.

func (GatewayOutput) Description added in v3.27.0 

func (o GatewayOutput) Description() pulumi.StringPtrOutput

The description of the VPN instance.

func (GatewayOutput) ElementType 

func (GatewayOutput) ElementType() reflect.Type

func (GatewayOutput) EnableIpsec added in v3.27.0 

func (o GatewayOutput) EnableIpsec() pulumi.BoolPtrOutput

Enable or Disable IPSec VPN. At least one type of VPN should be enabled.

func (GatewayOutput) EnableSsl added in v3.27.0 

func (o GatewayOutput) EnableSsl() pulumi.BoolPtrOutput

Enable or Disable SSL VPN. At least one type of VPN should be enabled.

func (GatewayOutput) InstanceChargeType added in v3.27.0 

func (o GatewayOutput) InstanceChargeType() pulumi.StringPtrOutput

The charge type for instance. If it is an international site account, the valid value is PostPaid, otherwise PrePaid. Default to PostPaid.

func (GatewayOutput) InternetIp added in v3.27.0 

func (o GatewayOutput) InternetIp() pulumi.StringOutput

The internet ip of the VPN.

func (GatewayOutput) Name added in v3.27.0 

func (o GatewayOutput) Name() pulumi.StringOutput

The name of the VPN. Defaults to null.

func (GatewayOutput) NetworkType added in v3.29.0 

func (o GatewayOutput) NetworkType() pulumi.StringOutput

The network type of the VPN gateway. Value: - public (default): Public VPN gateway. - private: Private VPN gateway.

> **NOTE:** Private VPN gateway can only be purchased by white list users, and the bandwidth only supports 200M or 1000M; In addition, SSL is not supported.

func (GatewayOutput) Period added in v3.27.0 

func (o GatewayOutput) Period() pulumi.IntPtrOutput

The filed is only required while the InstanceChargeType is PrePaid. Valid values: [1-9, 12, 24, 36]. Default to 1.

func (GatewayOutput) SslConnections added in v3.27.0 

func (o GatewayOutput) SslConnections() pulumi.IntPtrOutput

The max connections of SSL VPN. Default to 5. The number of connections supported by each account is different. This field is ignored when enableSsl is false.

func (GatewayOutput) Status added in v3.27.0 

func (o GatewayOutput) Status() pulumi.StringOutput

The status of the VPN gateway.

func (GatewayOutput) Tags added in v3.27.0 

func (o GatewayOutput) Tags() pulumi.MapOutput

The tags of VPN gateway.

func (GatewayOutput) ToGatewayOutput 

func (o GatewayOutput) ToGatewayOutput() GatewayOutput

func (GatewayOutput) ToGatewayOutputWithContext 

func (o GatewayOutput) ToGatewayOutputWithContext(ctx context.Context) GatewayOutput

func (GatewayOutput) ToOutput added in v3.43.1 

func (o GatewayOutput) ToOutput(ctx context.Context) pulumix.Output[*Gateway]

func (GatewayOutput) VpcId added in v3.27.0 

func (o GatewayOutput) VpcId() pulumi.StringOutput

The VPN belongs the vpc_id, the field can't be changed.

func (GatewayOutput) VswitchId added in v3.27.0 

func (o GatewayOutput) VswitchId() pulumi.StringOutput

The VPN belongs the vswitch_id, the field can't be changed.

type GatewayState 

type GatewayState struct {
	// Whether to pay automatically. Default value: `true`. Valid values:
	AutoPay pulumi.BoolPtrInput
	// Specifies whether to automatically advertise BGP routes to the virtual private cloud (VPC). Valid values:
	AutoPropagate pulumi.BoolPtrInput
	Bandwidth     pulumi.IntPtrInput
	// The business status of the VPN gateway.
	BusinessStatus pulumi.StringPtrInput
	// The description of the VPN instance.
	Description pulumi.StringPtrInput
	// Enable or Disable IPSec VPN. At least one type of VPN should be enabled.
	EnableIpsec pulumi.BoolPtrInput
	// Enable or Disable SSL VPN.  At least one type of VPN should be enabled.
	EnableSsl pulumi.BoolPtrInput
	// The charge type for instance. If it is an international site account, the valid value is PostPaid, otherwise PrePaid.
	// Default to PostPaid.
	InstanceChargeType pulumi.StringPtrInput
	// The internet ip of the VPN.
	InternetIp pulumi.StringPtrInput
	// The name of the VPN. Defaults to null.
	Name pulumi.StringPtrInput
	// The network type of the VPN gateway. Value:
	// - public (default): Public VPN gateway.
	// - private: Private VPN gateway.
	//
	// > **NOTE:** Private VPN gateway can only be purchased by white list users, and the bandwidth only supports 200M or 1000M; In addition, SSL is not supported.
	NetworkType pulumi.StringPtrInput
	// The filed is only required while the InstanceChargeType is PrePaid. Valid values: [1-9, 12, 24, 36]. Default to 1.
	Period pulumi.IntPtrInput
	// The max connections of SSL VPN. Default to 5. The number of connections supported by each account is different.
	// This field is ignored when enableSsl is false.
	SslConnections pulumi.IntPtrInput
	// The status of the VPN gateway.
	Status pulumi.StringPtrInput
	// The tags of VPN gateway.
	Tags pulumi.MapInput
	// The VPN belongs the vpc_id, the field can't be changed.
	VpcId pulumi.StringPtrInput
	// The VPN belongs the vswitch_id, the field can't be changed.
	VswitchId pulumi.StringPtrInput
}

func (GatewayState) ElementType 

func (GatewayState) ElementType() reflect.Type

type GatewayVcoRoute added in v3.29.0 

type GatewayVcoRoute struct {
	pulumi.CustomResourceState

	// The next hop of the destination route.
	NextHop pulumi.StringOutput `pulumi:"nextHop"`
	// The destination network segment of the destination route.
	RouteDest pulumi.StringOutput `pulumi:"routeDest"`
	// The status of the vpn route entry.
	Status pulumi.StringOutput `pulumi:"status"`
	// The id of the vpn attachment.
	VpnConnectionId pulumi.StringOutput `pulumi:"vpnConnectionId"`
	// The weight value of the destination route. Valid values: `0`, `100`.
	Weight pulumi.IntOutput `pulumi:"weight"`
}

Provides a VPN Gateway Vco Route resource.

For information about VPN Gateway Vco Route and how to use it, see [What is Vco Route](https://www.alibabacloud.com/help/zh/virtual-private-cloud/latest/createvcorouteentry).

> **NOTE:** Available in v1.183.0+.

## Example Usage

Basic Usage

```go package main

import ( 

"github.com/pulumi/pulumi-alicloud/sdk/v3/go/alicloud/cen"
"github.com/pulumi/pulumi-alicloud/sdk/v3/go/alicloud/vpn"
"github.com/pulumi/pulumi/sdk/v3/go/pulumi"

) 

func main() {
	pulumi.Run(func(ctx *pulumi.Context) error {
		defaultInstance, err := cen.NewInstance(ctx, "defaultInstance", &cen.InstanceArgs{
			CenInstanceName: pulumi.Any(_var.Name),
		})
		if err != nil {
			return err
		}
		defaultTransitRouter, err := cen.NewTransitRouter(ctx, "defaultTransitRouter", &cen.TransitRouterArgs{
			CenId:                    defaultInstance.ID(),
			TransitRouterDescription: pulumi.String("desd"),
			TransitRouterName:        pulumi.Any(_var.Name),
		})
		if err != nil {
			return err
		}
		defaultTransitRouterAvailableResources, err := cen.GetTransitRouterAvailableResources(ctx, nil, nil)
		if err != nil {
			return err
		}
		defaultCustomerGateway, err := vpn.NewCustomerGateway(ctx, "defaultCustomerGateway", &vpn.CustomerGatewayArgs{
			IpAddress:   pulumi.String("42.104.22.210"),
			Asn:         pulumi.String("45014"),
			Description: pulumi.String("testAccVpnConnectionDesc"),
		})
		if err != nil {
			return err
		}
		defaultGatewayVpnAttachment, err := vpn.NewGatewayVpnAttachment(ctx, "defaultGatewayVpnAttachment", &vpn.GatewayVpnAttachmentArgs{
			CustomerGatewayId: defaultCustomerGateway.ID(),
			NetworkType:       pulumi.String("public"),
			LocalSubnet:       pulumi.String("0.0.0.0/0"),
			RemoteSubnet:      pulumi.String("0.0.0.0/0"),
			EffectImmediately: pulumi.Bool(false),
			IkeConfig: &vpn.GatewayVpnAttachmentIkeConfigArgs{
				IkeAuthAlg:  pulumi.String("md5"),
				IkeEncAlg:   pulumi.String("des"),
				IkeVersion:  pulumi.String("ikev2"),
				IkeMode:     pulumi.String("main"),
				IkeLifetime: pulumi.Int(86400),
				Psk:         pulumi.String("tf-testvpn2"),
				IkePfs:      pulumi.String("group1"),
				RemoteId:    pulumi.String("testbob2"),
				LocalId:     pulumi.String("testalice2"),
			},
			IpsecConfig: &vpn.GatewayVpnAttachmentIpsecConfigArgs{
				IpsecPfs:      pulumi.String("group5"),
				IpsecEncAlg:   pulumi.String("des"),
				IpsecAuthAlg:  pulumi.String("md5"),
				IpsecLifetime: pulumi.Int(86400),
			},
			BgpConfig: &vpn.GatewayVpnAttachmentBgpConfigArgs{
				Enable:     pulumi.Bool(true),
				LocalAsn:   pulumi.Int(45014),
				TunnelCidr: pulumi.String("169.254.11.0/30"),
				LocalBgpIp: pulumi.String("169.254.11.1"),
			},
			HealthCheckConfig: &vpn.GatewayVpnAttachmentHealthCheckConfigArgs{
				Enable:   pulumi.Bool(true),
				Sip:      pulumi.String("192.168.1.1"),
				Dip:      pulumi.String("10.0.0.1"),
				Interval: pulumi.Int(10),
				Retry:    pulumi.Int(10),
				Policy:   pulumi.String("revoke_route"),
			},
			EnableDpd:          pulumi.Bool(true),
			EnableNatTraversal: pulumi.Bool(true),
			VpnAttachmentName:  pulumi.Any(_var.Name),
		})
		if err != nil {
			return err
		}
		defaultTransitRouterVpnAttachment, err := cen.NewTransitRouterVpnAttachment(ctx, "defaultTransitRouterVpnAttachment", &cen.TransitRouterVpnAttachmentArgs{
			AutoPublishRouteEnabled:            pulumi.Bool(false),
			TransitRouterAttachmentDescription: pulumi.Any(_var.Name),
			TransitRouterAttachmentName:        pulumi.Any(_var.Name),
			CenId:                              defaultTransitRouter.CenId,
			TransitRouterId:                    defaultTransitRouter.TransitRouterId,
			VpnId:                              defaultGatewayVpnAttachment.ID(),
			Zones: cen.TransitRouterVpnAttachmentZoneArray{
				&cen.TransitRouterVpnAttachmentZoneArgs{
					ZoneId: *pulumi.String(defaultTransitRouterAvailableResources.Resources[0].MasterZones[0]),
				},
			},
		})
		if err != nil {
			return err
		}
		_, err = vpn.NewGatewayVcoRoute(ctx, "defaultGatewayVcoRoute", &vpn.GatewayVcoRouteArgs{
			RouteDest:       pulumi.String("192.168.12.0/24"),
			NextHop:         defaultTransitRouterVpnAttachment.VpnId,
			VpnConnectionId: defaultTransitRouterVpnAttachment.VpnId,
			Weight:          pulumi.Int(100),
		})
		if err != nil {
			return err
		}
		return nil
	})
}

```

## Import

VPN Gateway Vco Route can be imported using the id, e.g.

```sh 

$ pulumi import alicloud:vpn/gatewayVcoRoute:GatewayVcoRoute example <vpn_connection_id>:<route_dest>:<next_hop>:<weight>

```

func GetGatewayVcoRoute added in v3.29.0 

func GetGatewayVcoRoute(ctx *pulumi.Context,
	name string, id pulumi.IDInput, state *GatewayVcoRouteState, opts ...pulumi.ResourceOption) (*GatewayVcoRoute, error)

GetGatewayVcoRoute gets an existing GatewayVcoRoute resource's state with the given name, ID, and optional state properties that are used to uniquely qualify the lookup (nil if not required).

func NewGatewayVcoRoute added in v3.29.0 

func NewGatewayVcoRoute(ctx *pulumi.Context,
	name string, args *GatewayVcoRouteArgs, opts ...pulumi.ResourceOption) (*GatewayVcoRoute, error)

NewGatewayVcoRoute registers a new resource with the given unique name, arguments, and options.

func (*GatewayVcoRoute) ElementType added in v3.29.0 

func (*GatewayVcoRoute) ElementType() reflect.Type

func (*GatewayVcoRoute) ToGatewayVcoRouteOutput added in v3.29.0 

func (i *GatewayVcoRoute) ToGatewayVcoRouteOutput() GatewayVcoRouteOutput

func (*GatewayVcoRoute) ToGatewayVcoRouteOutputWithContext added in v3.29.0 

func (i *GatewayVcoRoute) ToGatewayVcoRouteOutputWithContext(ctx context.Context) GatewayVcoRouteOutput

func (*GatewayVcoRoute) ToOutput added in v3.43.1 

func (i *GatewayVcoRoute) ToOutput(ctx context.Context) pulumix.Output[*GatewayVcoRoute]

type GatewayVcoRouteArgs added in v3.29.0 

type GatewayVcoRouteArgs struct {
	// The next hop of the destination route.
	NextHop pulumi.StringInput
	// The destination network segment of the destination route.
	RouteDest pulumi.StringInput
	// The id of the vpn attachment.
	VpnConnectionId pulumi.StringInput
	// The weight value of the destination route. Valid values: `0`, `100`.
	Weight pulumi.IntInput
}

The set of arguments for constructing a GatewayVcoRoute resource.

func (GatewayVcoRouteArgs) ElementType added in v3.29.0 

func (GatewayVcoRouteArgs) ElementType() reflect.Type

type GatewayVcoRouteArray added in v3.29.0 

type GatewayVcoRouteArray []GatewayVcoRouteInput

func (GatewayVcoRouteArray) ElementType added in v3.29.0 

func (GatewayVcoRouteArray) ElementType() reflect.Type

func (GatewayVcoRouteArray) ToGatewayVcoRouteArrayOutput added in v3.29.0 

func (i GatewayVcoRouteArray) ToGatewayVcoRouteArrayOutput() GatewayVcoRouteArrayOutput

func (GatewayVcoRouteArray) ToGatewayVcoRouteArrayOutputWithContext added in v3.29.0 

func (i GatewayVcoRouteArray) ToGatewayVcoRouteArrayOutputWithContext(ctx context.Context) GatewayVcoRouteArrayOutput

func (GatewayVcoRouteArray) ToOutput added in v3.43.1 

func (i GatewayVcoRouteArray) ToOutput(ctx context.Context) pulumix.Output[[]*GatewayVcoRoute]

type GatewayVcoRouteArrayInput added in v3.29.0 

type GatewayVcoRouteArrayInput interface {
	pulumi.Input

	ToGatewayVcoRouteArrayOutput() GatewayVcoRouteArrayOutput
	ToGatewayVcoRouteArrayOutputWithContext(context.Context) GatewayVcoRouteArrayOutput
}

GatewayVcoRouteArrayInput is an input type that accepts GatewayVcoRouteArray and GatewayVcoRouteArrayOutput values. You can construct a concrete instance of `GatewayVcoRouteArrayInput` via: 

GatewayVcoRouteArray{ GatewayVcoRouteArgs{...} }

type GatewayVcoRouteArrayOutput added in v3.29.0 

type GatewayVcoRouteArrayOutput struct{ *pulumi.OutputState }

func (GatewayVcoRouteArrayOutput) ElementType added in v3.29.0 

func (GatewayVcoRouteArrayOutput) ElementType() reflect.Type

func (GatewayVcoRouteArrayOutput) Index added in v3.29.0 

func (o GatewayVcoRouteArrayOutput) Index(i pulumi.IntInput) GatewayVcoRouteOutput

func (GatewayVcoRouteArrayOutput) ToGatewayVcoRouteArrayOutput added in v3.29.0 

func (o GatewayVcoRouteArrayOutput) ToGatewayVcoRouteArrayOutput() GatewayVcoRouteArrayOutput

func (GatewayVcoRouteArrayOutput) ToGatewayVcoRouteArrayOutputWithContext added in v3.29.0 

func (o GatewayVcoRouteArrayOutput) ToGatewayVcoRouteArrayOutputWithContext(ctx context.Context) GatewayVcoRouteArrayOutput

func (GatewayVcoRouteArrayOutput) ToOutput added in v3.43.1 

func (o GatewayVcoRouteArrayOutput) ToOutput(ctx context.Context) pulumix.Output[[]*GatewayVcoRoute]

type GatewayVcoRouteInput added in v3.29.0 

type GatewayVcoRouteInput interface {
	pulumi.Input

	ToGatewayVcoRouteOutput() GatewayVcoRouteOutput
	ToGatewayVcoRouteOutputWithContext(ctx context.Context) GatewayVcoRouteOutput
}

type GatewayVcoRouteMap added in v3.29.0 

type GatewayVcoRouteMap map[string]GatewayVcoRouteInput

func (GatewayVcoRouteMap) ElementType added in v3.29.0 

func (GatewayVcoRouteMap) ElementType() reflect.Type

func (GatewayVcoRouteMap) ToGatewayVcoRouteMapOutput added in v3.29.0 

func (i GatewayVcoRouteMap) ToGatewayVcoRouteMapOutput() GatewayVcoRouteMapOutput

func (GatewayVcoRouteMap) ToGatewayVcoRouteMapOutputWithContext added in v3.29.0 

func (i GatewayVcoRouteMap) ToGatewayVcoRouteMapOutputWithContext(ctx context.Context) GatewayVcoRouteMapOutput

func (GatewayVcoRouteMap) ToOutput added in v3.43.1 

func (i GatewayVcoRouteMap) ToOutput(ctx context.Context) pulumix.Output[map[string]*GatewayVcoRoute]

type GatewayVcoRouteMapInput added in v3.29.0 

type GatewayVcoRouteMapInput interface {
	pulumi.Input

	ToGatewayVcoRouteMapOutput() GatewayVcoRouteMapOutput
	ToGatewayVcoRouteMapOutputWithContext(context.Context) GatewayVcoRouteMapOutput
}

GatewayVcoRouteMapInput is an input type that accepts GatewayVcoRouteMap and GatewayVcoRouteMapOutput values. You can construct a concrete instance of `GatewayVcoRouteMapInput` via: 

GatewayVcoRouteMap{ "key": GatewayVcoRouteArgs{...} }

type GatewayVcoRouteMapOutput added in v3.29.0 

type GatewayVcoRouteMapOutput struct{ *pulumi.OutputState }

func (GatewayVcoRouteMapOutput) ElementType added in v3.29.0 

func (GatewayVcoRouteMapOutput) ElementType() reflect.Type

func (GatewayVcoRouteMapOutput) MapIndex added in v3.29.0 

func (o GatewayVcoRouteMapOutput) MapIndex(k pulumi.StringInput) GatewayVcoRouteOutput

func (GatewayVcoRouteMapOutput) ToGatewayVcoRouteMapOutput added in v3.29.0 

func (o GatewayVcoRouteMapOutput) ToGatewayVcoRouteMapOutput() GatewayVcoRouteMapOutput

func (GatewayVcoRouteMapOutput) ToGatewayVcoRouteMapOutputWithContext added in v3.29.0 

func (o GatewayVcoRouteMapOutput) ToGatewayVcoRouteMapOutputWithContext(ctx context.Context) GatewayVcoRouteMapOutput

func (GatewayVcoRouteMapOutput) ToOutput added in v3.43.1 

func (o GatewayVcoRouteMapOutput) ToOutput(ctx context.Context) pulumix.Output[map[string]*GatewayVcoRoute]

type GatewayVcoRouteOutput added in v3.29.0 

type GatewayVcoRouteOutput struct{ *pulumi.OutputState }

func (GatewayVcoRouteOutput) ElementType added in v3.29.0 

func (GatewayVcoRouteOutput) ElementType() reflect.Type

func (GatewayVcoRouteOutput) NextHop added in v3.29.0 

func (o GatewayVcoRouteOutput) NextHop() pulumi.StringOutput

The next hop of the destination route.

func (GatewayVcoRouteOutput) RouteDest added in v3.29.0 

func (o GatewayVcoRouteOutput) RouteDest() pulumi.StringOutput

The destination network segment of the destination route.

func (GatewayVcoRouteOutput) Status added in v3.29.0 

func (o GatewayVcoRouteOutput) Status() pulumi.StringOutput

The status of the vpn route entry.

func (GatewayVcoRouteOutput) ToGatewayVcoRouteOutput added in v3.29.0 

func (o GatewayVcoRouteOutput) ToGatewayVcoRouteOutput() GatewayVcoRouteOutput

func (GatewayVcoRouteOutput) ToGatewayVcoRouteOutputWithContext added in v3.29.0 

func (o GatewayVcoRouteOutput) ToGatewayVcoRouteOutputWithContext(ctx context.Context) GatewayVcoRouteOutput

func (GatewayVcoRouteOutput) ToOutput added in v3.43.1 

func (o GatewayVcoRouteOutput) ToOutput(ctx context.Context) pulumix.Output[*GatewayVcoRoute]

func (GatewayVcoRouteOutput) VpnConnectionId added in v3.29.0 

func (o GatewayVcoRouteOutput) VpnConnectionId() pulumi.StringOutput

The id of the vpn attachment.

func (GatewayVcoRouteOutput) Weight added in v3.29.0 

func (o GatewayVcoRouteOutput) Weight() pulumi.IntOutput

The weight value of the destination route. Valid values: `0`, `100`.

type GatewayVcoRouteState added in v3.29.0 

type GatewayVcoRouteState struct {
	// The next hop of the destination route.
	NextHop pulumi.StringPtrInput
	// The destination network segment of the destination route.
	RouteDest pulumi.StringPtrInput
	// The status of the vpn route entry.
	Status pulumi.StringPtrInput
	// The id of the vpn attachment.
	VpnConnectionId pulumi.StringPtrInput
	// The weight value of the destination route. Valid values: `0`, `100`.
	Weight pulumi.IntPtrInput
}

func (GatewayVcoRouteState) ElementType added in v3.29.0 

func (GatewayVcoRouteState) ElementType() reflect.Type

type GatewayVpnAttachment added in v3.28.0 

type GatewayVpnAttachment struct {
	pulumi.CustomResourceState

	// Bgp configuration information. See `bgpConfig` below.
	BgpConfig GatewayVpnAttachmentBgpConfigOutput `pulumi:"bgpConfig"`
	// The ID of the customer gateway. From version 1.196.0, `customerGatewayId` can be modified.
	CustomerGatewayId pulumi.StringOutput `pulumi:"customerGatewayId"`
	// Indicates whether IPsec-VPN negotiations are initiated immediately. Valid values.
	EffectImmediately pulumi.BoolPtrOutput `pulumi:"effectImmediately"`
	// Whether to enable the DPD (peer survival detection) function.
	EnableDpd pulumi.BoolOutput `pulumi:"enableDpd"`
	// Allow NAT penetration.
	EnableNatTraversal pulumi.BoolOutput `pulumi:"enableNatTraversal"`
	// Health check configuration information. See `healthCheckConfig` below.
	HealthCheckConfig GatewayVpnAttachmentHealthCheckConfigOutput `pulumi:"healthCheckConfig"`
	// Configuration negotiated in the second stage. See `ikeConfig` below.
	IkeConfig GatewayVpnAttachmentIkeConfigOutput `pulumi:"ikeConfig"`
	// The VPN gateway IP.
	InternetIp pulumi.StringOutput `pulumi:"internetIp"`
	// Configuration negotiated in the second stage. See `ipsecConfig` below.
	IpsecConfig GatewayVpnAttachmentIpsecConfigOutput `pulumi:"ipsecConfig"`
	// The CIDR block of the virtual private cloud (VPC).
	LocalSubnet pulumi.StringOutput `pulumi:"localSubnet"`
	// The network type of the IPsec connection. Valid values: `public`, `private`.
	NetworkType pulumi.StringOutput `pulumi:"networkType"`
	// The CIDR block of the on-premises data center.
	RemoteSubnet pulumi.StringOutput `pulumi:"remoteSubnet"`
	// The status of the resource.
	Status pulumi.StringOutput `pulumi:"status"`
	// The name of the vpn attachment.
	VpnAttachmentName pulumi.StringPtrOutput `pulumi:"vpnAttachmentName"`
}

Provides a VPN Gateway Vpn Attachment resource.

For information about VPN Gateway Vpn Attachment and how to use it, see [What is Vpn Attachment](https://www.alibabacloud.com/help/zh/virtual-private-cloud/latest/createvpnattachment).

> **NOTE:** Available since v1.181.0.

## Example Usage

Basic Usage

```go package main

import ( 

"github.com/pulumi/pulumi-alicloud/sdk/v3/go/alicloud/vpn"
"github.com/pulumi/pulumi/sdk/v3/go/pulumi"
"github.com/pulumi/pulumi/sdk/v3/go/pulumi/config"

) 

func main() {
	pulumi.Run(func(ctx *pulumi.Context) error {
		cfg := config.New(ctx, "")
		name := "tf-example"
		if param := cfg.Get("name"); param != "" {
			name = param
		}
		defaultCustomerGateway, err := vpn.NewCustomerGateway(ctx, "defaultCustomerGateway", &vpn.CustomerGatewayArgs{
			IpAddress:   pulumi.String("42.104.22.210"),
			Asn:         pulumi.String("45014"),
			Description: pulumi.String(name),
		})
		if err != nil {
			return err
		}
		_, err = vpn.NewGatewayVpnAttachment(ctx, "defaultGatewayVpnAttachment", &vpn.GatewayVpnAttachmentArgs{
			CustomerGatewayId: defaultCustomerGateway.ID(),
			NetworkType:       pulumi.String("public"),
			LocalSubnet:       pulumi.String("0.0.0.0/0"),
			RemoteSubnet:      pulumi.String("0.0.0.0/0"),
			EffectImmediately: pulumi.Bool(false),
			IkeConfig: &vpn.GatewayVpnAttachmentIkeConfigArgs{
				IkeAuthAlg:  pulumi.String("md5"),
				IkeEncAlg:   pulumi.String("des"),
				IkeVersion:  pulumi.String("ikev2"),
				IkeMode:     pulumi.String("main"),
				IkeLifetime: pulumi.Int(86400),
				Psk:         pulumi.String("tf-testvpn2"),
				IkePfs:      pulumi.String("group1"),
				RemoteId:    pulumi.String("testbob2"),
				LocalId:     pulumi.String("testalice2"),
			},
			IpsecConfig: &vpn.GatewayVpnAttachmentIpsecConfigArgs{
				IpsecPfs:      pulumi.String("group5"),
				IpsecEncAlg:   pulumi.String("des"),
				IpsecAuthAlg:  pulumi.String("md5"),
				IpsecLifetime: pulumi.Int(86400),
			},
			BgpConfig: &vpn.GatewayVpnAttachmentBgpConfigArgs{
				Enable:     pulumi.Bool(true),
				LocalAsn:   pulumi.Int(45014),
				TunnelCidr: pulumi.String("169.254.11.0/30"),
				LocalBgpIp: pulumi.String("169.254.11.1"),
			},
			HealthCheckConfig: &vpn.GatewayVpnAttachmentHealthCheckConfigArgs{
				Enable:   pulumi.Bool(true),
				Sip:      pulumi.String("192.168.1.1"),
				Dip:      pulumi.String("10.0.0.1"),
				Interval: pulumi.Int(10),
				Retry:    pulumi.Int(10),
				Policy:   pulumi.String("revoke_route"),
			},
			EnableDpd:          pulumi.Bool(true),
			EnableNatTraversal: pulumi.Bool(true),
			VpnAttachmentName:  pulumi.String(name),
		})
		if err != nil {
			return err
		}
		return nil
	})
}

```

## Import

VPN Gateway Vpn Attachment can be imported using the id, e.g.

```sh 

$ pulumi import alicloud:vpn/gatewayVpnAttachment:GatewayVpnAttachment example <id>

```

func GetGatewayVpnAttachment added in v3.28.0 

func GetGatewayVpnAttachment(ctx *pulumi.Context,
	name string, id pulumi.IDInput, state *GatewayVpnAttachmentState, opts ...pulumi.ResourceOption) (*GatewayVpnAttachment, error)

GetGatewayVpnAttachment gets an existing GatewayVpnAttachment resource's state with the given name, ID, and optional state properties that are used to uniquely qualify the lookup (nil if not required).

func NewGatewayVpnAttachment added in v3.28.0 

func NewGatewayVpnAttachment(ctx *pulumi.Context,
	name string, args *GatewayVpnAttachmentArgs, opts ...pulumi.ResourceOption) (*GatewayVpnAttachment, error)

NewGatewayVpnAttachment registers a new resource with the given unique name, arguments, and options.

func (*GatewayVpnAttachment) ElementType added in v3.28.0 

func (*GatewayVpnAttachment) ElementType() reflect.Type

func (*GatewayVpnAttachment) ToGatewayVpnAttachmentOutput added in v3.28.0 

func (i *GatewayVpnAttachment) ToGatewayVpnAttachmentOutput() GatewayVpnAttachmentOutput

func (*GatewayVpnAttachment) ToGatewayVpnAttachmentOutputWithContext added in v3.28.0 

func (i *GatewayVpnAttachment) ToGatewayVpnAttachmentOutputWithContext(ctx context.Context) GatewayVpnAttachmentOutput

func (*GatewayVpnAttachment) ToOutput added in v3.43.1 

func (i *GatewayVpnAttachment) ToOutput(ctx context.Context) pulumix.Output[*GatewayVpnAttachment]

type GatewayVpnAttachmentArgs added in v3.28.0 

type GatewayVpnAttachmentArgs struct {
	// Bgp configuration information. See `bgpConfig` below.
	BgpConfig GatewayVpnAttachmentBgpConfigPtrInput
	// The ID of the customer gateway. From version 1.196.0, `customerGatewayId` can be modified.
	CustomerGatewayId pulumi.StringInput
	// Indicates whether IPsec-VPN negotiations are initiated immediately. Valid values.
	EffectImmediately pulumi.BoolPtrInput
	// Whether to enable the DPD (peer survival detection) function.
	EnableDpd pulumi.BoolPtrInput
	// Allow NAT penetration.
	EnableNatTraversal pulumi.BoolPtrInput
	// Health check configuration information. See `healthCheckConfig` below.
	HealthCheckConfig GatewayVpnAttachmentHealthCheckConfigPtrInput
	// Configuration negotiated in the second stage. See `ikeConfig` below.
	IkeConfig GatewayVpnAttachmentIkeConfigPtrInput
	// Configuration negotiated in the second stage. See `ipsecConfig` below.
	IpsecConfig GatewayVpnAttachmentIpsecConfigPtrInput
	// The CIDR block of the virtual private cloud (VPC).
	LocalSubnet pulumi.StringInput
	// The network type of the IPsec connection. Valid values: `public`, `private`.
	NetworkType pulumi.StringPtrInput
	// The CIDR block of the on-premises data center.
	RemoteSubnet pulumi.StringInput
	// The name of the vpn attachment.
	VpnAttachmentName pulumi.StringPtrInput
}

The set of arguments for constructing a GatewayVpnAttachment resource.

func (GatewayVpnAttachmentArgs) ElementType added in v3.28.0 

func (GatewayVpnAttachmentArgs) ElementType() reflect.Type

type GatewayVpnAttachmentArray added in v3.28.0 

type GatewayVpnAttachmentArray []GatewayVpnAttachmentInput

func (GatewayVpnAttachmentArray) ElementType added in v3.28.0 

func (GatewayVpnAttachmentArray) ElementType() reflect.Type

func (GatewayVpnAttachmentArray) ToGatewayVpnAttachmentArrayOutput added in v3.28.0 

func (i GatewayVpnAttachmentArray) ToGatewayVpnAttachmentArrayOutput() GatewayVpnAttachmentArrayOutput

func (GatewayVpnAttachmentArray) ToGatewayVpnAttachmentArrayOutputWithContext added in v3.28.0 

func (i GatewayVpnAttachmentArray) ToGatewayVpnAttachmentArrayOutputWithContext(ctx context.Context) GatewayVpnAttachmentArrayOutput

func (GatewayVpnAttachmentArray) ToOutput added in v3.43.1 

func (i GatewayVpnAttachmentArray) ToOutput(ctx context.Context) pulumix.Output[[]*GatewayVpnAttachment]

type GatewayVpnAttachmentArrayInput added in v3.28.0 

type GatewayVpnAttachmentArrayInput interface {
	pulumi.Input

	ToGatewayVpnAttachmentArrayOutput() GatewayVpnAttachmentArrayOutput
	ToGatewayVpnAttachmentArrayOutputWithContext(context.Context) GatewayVpnAttachmentArrayOutput
}

GatewayVpnAttachmentArrayInput is an input type that accepts GatewayVpnAttachmentArray and GatewayVpnAttachmentArrayOutput values. You can construct a concrete instance of `GatewayVpnAttachmentArrayInput` via: 

GatewayVpnAttachmentArray{ GatewayVpnAttachmentArgs{...} }

type GatewayVpnAttachmentArrayOutput added in v3.28.0 

type GatewayVpnAttachmentArrayOutput struct{ *pulumi.OutputState }

func (GatewayVpnAttachmentArrayOutput) ElementType added in v3.28.0 

func (GatewayVpnAttachmentArrayOutput) ElementType() reflect.Type

func (GatewayVpnAttachmentArrayOutput) Index added in v3.28.0 

func (o GatewayVpnAttachmentArrayOutput) Index(i pulumi.IntInput) GatewayVpnAttachmentOutput

func (GatewayVpnAttachmentArrayOutput) ToGatewayVpnAttachmentArrayOutput added in v3.28.0 

func (o GatewayVpnAttachmentArrayOutput) ToGatewayVpnAttachmentArrayOutput() GatewayVpnAttachmentArrayOutput

func (GatewayVpnAttachmentArrayOutput) ToGatewayVpnAttachmentArrayOutputWithContext added in v3.28.0 

func (o GatewayVpnAttachmentArrayOutput) ToGatewayVpnAttachmentArrayOutputWithContext(ctx context.Context) GatewayVpnAttachmentArrayOutput

func (GatewayVpnAttachmentArrayOutput) ToOutput added in v3.43.1 

func (o GatewayVpnAttachmentArrayOutput) ToOutput(ctx context.Context) pulumix.Output[[]*GatewayVpnAttachment]

type GatewayVpnAttachmentBgpConfig added in v3.28.0 

type GatewayVpnAttachmentBgpConfig struct {
	// Whether to enable BGP.
	Enable *bool `pulumi:"enable"`
	// The ASN on the Alibaba Cloud side.
	LocalAsn *int `pulumi:"localAsn"`
	// The BGP IP address on the Alibaba Cloud side.
	LocalBgpIp *string `pulumi:"localBgpIp"`
	// The CIDR block of the IPsec tunnel. The CIDR block belongs to 169.254.0.0/16. The mask of the CIDR block is 30 bits in length.
	TunnelCidr *string `pulumi:"tunnelCidr"`
}

type GatewayVpnAttachmentBgpConfigArgs added in v3.28.0 

type GatewayVpnAttachmentBgpConfigArgs struct {
	// Whether to enable BGP.
	Enable pulumi.BoolPtrInput `pulumi:"enable"`
	// The ASN on the Alibaba Cloud side.
	LocalAsn pulumi.IntPtrInput `pulumi:"localAsn"`
	// The BGP IP address on the Alibaba Cloud side.
	LocalBgpIp pulumi.StringPtrInput `pulumi:"localBgpIp"`
	// The CIDR block of the IPsec tunnel. The CIDR block belongs to 169.254.0.0/16. The mask of the CIDR block is 30 bits in length.
	TunnelCidr pulumi.StringPtrInput `pulumi:"tunnelCidr"`
}

func (GatewayVpnAttachmentBgpConfigArgs) ElementType added in v3.28.0 

func (GatewayVpnAttachmentBgpConfigArgs) ElementType() reflect.Type

func (GatewayVpnAttachmentBgpConfigArgs) ToGatewayVpnAttachmentBgpConfigOutput added in v3.28.0 

func (i GatewayVpnAttachmentBgpConfigArgs) ToGatewayVpnAttachmentBgpConfigOutput() GatewayVpnAttachmentBgpConfigOutput

func (GatewayVpnAttachmentBgpConfigArgs) ToGatewayVpnAttachmentBgpConfigOutputWithContext added in v3.28.0 

func (i GatewayVpnAttachmentBgpConfigArgs) ToGatewayVpnAttachmentBgpConfigOutputWithContext(ctx context.Context) GatewayVpnAttachmentBgpConfigOutput

func (GatewayVpnAttachmentBgpConfigArgs) ToGatewayVpnAttachmentBgpConfigPtrOutput added in v3.28.0 

func (i GatewayVpnAttachmentBgpConfigArgs) ToGatewayVpnAttachmentBgpConfigPtrOutput() GatewayVpnAttachmentBgpConfigPtrOutput

func (GatewayVpnAttachmentBgpConfigArgs) ToGatewayVpnAttachmentBgpConfigPtrOutputWithContext added in v3.28.0 

func (i GatewayVpnAttachmentBgpConfigArgs) ToGatewayVpnAttachmentBgpConfigPtrOutputWithContext(ctx context.Context) GatewayVpnAttachmentBgpConfigPtrOutput

func (GatewayVpnAttachmentBgpConfigArgs) ToOutput added in v3.43.1 

func (i GatewayVpnAttachmentBgpConfigArgs) ToOutput(ctx context.Context) pulumix.Output[GatewayVpnAttachmentBgpConfig]

type GatewayVpnAttachmentBgpConfigInput added in v3.28.0 

type GatewayVpnAttachmentBgpConfigInput interface {
	pulumi.Input

	ToGatewayVpnAttachmentBgpConfigOutput() GatewayVpnAttachmentBgpConfigOutput
	ToGatewayVpnAttachmentBgpConfigOutputWithContext(context.Context) GatewayVpnAttachmentBgpConfigOutput
}

GatewayVpnAttachmentBgpConfigInput is an input type that accepts GatewayVpnAttachmentBgpConfigArgs and GatewayVpnAttachmentBgpConfigOutput values. You can construct a concrete instance of `GatewayVpnAttachmentBgpConfigInput` via: 

GatewayVpnAttachmentBgpConfigArgs{...}

type GatewayVpnAttachmentBgpConfigOutput added in v3.28.0 

type GatewayVpnAttachmentBgpConfigOutput struct{ *pulumi.OutputState }

func (GatewayVpnAttachmentBgpConfigOutput) ElementType added in v3.28.0 

func (GatewayVpnAttachmentBgpConfigOutput) ElementType() reflect.Type

func (GatewayVpnAttachmentBgpConfigOutput) Enable added in v3.28.0 

func (o GatewayVpnAttachmentBgpConfigOutput) Enable() pulumi.BoolPtrOutput

Whether to enable BGP.

func (GatewayVpnAttachmentBgpConfigOutput) LocalAsn added in v3.28.0 

func (o GatewayVpnAttachmentBgpConfigOutput) LocalAsn() pulumi.IntPtrOutput

The ASN on the Alibaba Cloud side.

func (GatewayVpnAttachmentBgpConfigOutput) LocalBgpIp added in v3.28.0 

func (o GatewayVpnAttachmentBgpConfigOutput) LocalBgpIp() pulumi.StringPtrOutput

The BGP IP address on the Alibaba Cloud side.

func (GatewayVpnAttachmentBgpConfigOutput) ToGatewayVpnAttachmentBgpConfigOutput added in v3.28.0 

func (o GatewayVpnAttachmentBgpConfigOutput) ToGatewayVpnAttachmentBgpConfigOutput() GatewayVpnAttachmentBgpConfigOutput

func (GatewayVpnAttachmentBgpConfigOutput) ToGatewayVpnAttachmentBgpConfigOutputWithContext added in v3.28.0 

func (o GatewayVpnAttachmentBgpConfigOutput) ToGatewayVpnAttachmentBgpConfigOutputWithContext(ctx context.Context) GatewayVpnAttachmentBgpConfigOutput

func (GatewayVpnAttachmentBgpConfigOutput) ToGatewayVpnAttachmentBgpConfigPtrOutput added in v3.28.0 

func (o GatewayVpnAttachmentBgpConfigOutput) ToGatewayVpnAttachmentBgpConfigPtrOutput() GatewayVpnAttachmentBgpConfigPtrOutput

func (GatewayVpnAttachmentBgpConfigOutput) ToGatewayVpnAttachmentBgpConfigPtrOutputWithContext added in v3.28.0 

func (o GatewayVpnAttachmentBgpConfigOutput) ToGatewayVpnAttachmentBgpConfigPtrOutputWithContext(ctx context.Context) GatewayVpnAttachmentBgpConfigPtrOutput

func (GatewayVpnAttachmentBgpConfigOutput) ToOutput added in v3.43.1 

func (o GatewayVpnAttachmentBgpConfigOutput) ToOutput(ctx context.Context) pulumix.Output[GatewayVpnAttachmentBgpConfig]

func (GatewayVpnAttachmentBgpConfigOutput) TunnelCidr added in v3.28.0 

func (o GatewayVpnAttachmentBgpConfigOutput) TunnelCidr() pulumi.StringPtrOutput

The CIDR block of the IPsec tunnel. The CIDR block belongs to 169.254.0.0/16. The mask of the CIDR block is 30 bits in length.

type GatewayVpnAttachmentBgpConfigPtrInput added in v3.28.0 

type GatewayVpnAttachmentBgpConfigPtrInput interface {
	pulumi.Input

	ToGatewayVpnAttachmentBgpConfigPtrOutput() GatewayVpnAttachmentBgpConfigPtrOutput
	ToGatewayVpnAttachmentBgpConfigPtrOutputWithContext(context.Context) GatewayVpnAttachmentBgpConfigPtrOutput
}

GatewayVpnAttachmentBgpConfigPtrInput is an input type that accepts GatewayVpnAttachmentBgpConfigArgs, GatewayVpnAttachmentBgpConfigPtr and GatewayVpnAttachmentBgpConfigPtrOutput values. You can construct a concrete instance of `GatewayVpnAttachmentBgpConfigPtrInput` via: 

        GatewayVpnAttachmentBgpConfigArgs{...}

or:

        nil

func GatewayVpnAttachmentBgpConfigPtr added in v3.28.0 

func GatewayVpnAttachmentBgpConfigPtr(v *GatewayVpnAttachmentBgpConfigArgs) GatewayVpnAttachmentBgpConfigPtrInput

type GatewayVpnAttachmentBgpConfigPtrOutput added in v3.28.0 

type GatewayVpnAttachmentBgpConfigPtrOutput struct{ *pulumi.OutputState }

func (GatewayVpnAttachmentBgpConfigPtrOutput) Elem added in v3.28.0 

func (o GatewayVpnAttachmentBgpConfigPtrOutput) Elem() GatewayVpnAttachmentBgpConfigOutput

func (GatewayVpnAttachmentBgpConfigPtrOutput) ElementType added in v3.28.0 

func (GatewayVpnAttachmentBgpConfigPtrOutput) ElementType() reflect.Type

func (GatewayVpnAttachmentBgpConfigPtrOutput) Enable added in v3.28.0 

func (o GatewayVpnAttachmentBgpConfigPtrOutput) Enable() pulumi.BoolPtrOutput

Whether to enable BGP.

func (GatewayVpnAttachmentBgpConfigPtrOutput) LocalAsn added in v3.28.0 

func (o GatewayVpnAttachmentBgpConfigPtrOutput) LocalAsn() pulumi.IntPtrOutput

The ASN on the Alibaba Cloud side.

func (GatewayVpnAttachmentBgpConfigPtrOutput) LocalBgpIp added in v3.28.0 

func (o GatewayVpnAttachmentBgpConfigPtrOutput) LocalBgpIp() pulumi.StringPtrOutput

The BGP IP address on the Alibaba Cloud side.

func (GatewayVpnAttachmentBgpConfigPtrOutput) ToGatewayVpnAttachmentBgpConfigPtrOutput added in v3.28.0 

func (o GatewayVpnAttachmentBgpConfigPtrOutput) ToGatewayVpnAttachmentBgpConfigPtrOutput() GatewayVpnAttachmentBgpConfigPtrOutput

func (GatewayVpnAttachmentBgpConfigPtrOutput) ToGatewayVpnAttachmentBgpConfigPtrOutputWithContext added in v3.28.0 

func (o GatewayVpnAttachmentBgpConfigPtrOutput) ToGatewayVpnAttachmentBgpConfigPtrOutputWithContext(ctx context.Context) GatewayVpnAttachmentBgpConfigPtrOutput

func (GatewayVpnAttachmentBgpConfigPtrOutput) ToOutput added in v3.43.1 

func (o GatewayVpnAttachmentBgpConfigPtrOutput) ToOutput(ctx context.Context) pulumix.Output[*GatewayVpnAttachmentBgpConfig]

func (GatewayVpnAttachmentBgpConfigPtrOutput) TunnelCidr added in v3.28.0 

func (o GatewayVpnAttachmentBgpConfigPtrOutput) TunnelCidr() pulumi.StringPtrOutput

The CIDR block of the IPsec tunnel. The CIDR block belongs to 169.254.0.0/16. The mask of the CIDR block is 30 bits in length.

type GatewayVpnAttachmentHealthCheckConfig added in v3.28.0 

type GatewayVpnAttachmentHealthCheckConfig struct {
	// The destination IP address that is used for health checks.
	Dip *string `pulumi:"dip"`
	// Specifies whether to enable health checks.
	Enable *bool `pulumi:"enable"`
	// The interval between two consecutive health checks. Unit: seconds.
	Interval *int `pulumi:"interval"`
	// Whether to revoke the published route when the health check fails. Valid values: `revokeRoute` or `reserveRoute`.
	Policy *string `pulumi:"policy"`
	// The maximum number of health check retries.
	Retry *int `pulumi:"retry"`
	// The source IP address that is used for health checks.
	Sip *string `pulumi:"sip"`
}

type GatewayVpnAttachmentHealthCheckConfigArgs added in v3.28.0 

type GatewayVpnAttachmentHealthCheckConfigArgs struct {
	// The destination IP address that is used for health checks.
	Dip pulumi.StringPtrInput `pulumi:"dip"`
	// Specifies whether to enable health checks.
	Enable pulumi.BoolPtrInput `pulumi:"enable"`
	// The interval between two consecutive health checks. Unit: seconds.
	Interval pulumi.IntPtrInput `pulumi:"interval"`
	// Whether to revoke the published route when the health check fails. Valid values: `revokeRoute` or `reserveRoute`.
	Policy pulumi.StringPtrInput `pulumi:"policy"`
	// The maximum number of health check retries.
	Retry pulumi.IntPtrInput `pulumi:"retry"`
	// The source IP address that is used for health checks.
	Sip pulumi.StringPtrInput `pulumi:"sip"`
}

func (GatewayVpnAttachmentHealthCheckConfigArgs) ElementType added in v3.28.0 

func (GatewayVpnAttachmentHealthCheckConfigArgs) ElementType() reflect.Type

func (GatewayVpnAttachmentHealthCheckConfigArgs) ToGatewayVpnAttachmentHealthCheckConfigOutput added in v3.28.0 

func (i GatewayVpnAttachmentHealthCheckConfigArgs) ToGatewayVpnAttachmentHealthCheckConfigOutput() GatewayVpnAttachmentHealthCheckConfigOutput

func (GatewayVpnAttachmentHealthCheckConfigArgs) ToGatewayVpnAttachmentHealthCheckConfigOutputWithContext added in v3.28.0 

func (i GatewayVpnAttachmentHealthCheckConfigArgs) ToGatewayVpnAttachmentHealthCheckConfigOutputWithContext(ctx context.Context) GatewayVpnAttachmentHealthCheckConfigOutput

func (GatewayVpnAttachmentHealthCheckConfigArgs) ToGatewayVpnAttachmentHealthCheckConfigPtrOutput added in v3.28.0 

func (i GatewayVpnAttachmentHealthCheckConfigArgs) ToGatewayVpnAttachmentHealthCheckConfigPtrOutput() GatewayVpnAttachmentHealthCheckConfigPtrOutput

func (GatewayVpnAttachmentHealthCheckConfigArgs) ToGatewayVpnAttachmentHealthCheckConfigPtrOutputWithContext added in v3.28.0 

func (i GatewayVpnAttachmentHealthCheckConfigArgs) ToGatewayVpnAttachmentHealthCheckConfigPtrOutputWithContext(ctx context.Context) GatewayVpnAttachmentHealthCheckConfigPtrOutput

func (GatewayVpnAttachmentHealthCheckConfigArgs) ToOutput added in v3.43.1 

func (i GatewayVpnAttachmentHealthCheckConfigArgs) ToOutput(ctx context.Context) pulumix.Output[GatewayVpnAttachmentHealthCheckConfig]

type GatewayVpnAttachmentHealthCheckConfigInput added in v3.28.0 

type GatewayVpnAttachmentHealthCheckConfigInput interface {
	pulumi.Input

	ToGatewayVpnAttachmentHealthCheckConfigOutput() GatewayVpnAttachmentHealthCheckConfigOutput
	ToGatewayVpnAttachmentHealthCheckConfigOutputWithContext(context.Context) GatewayVpnAttachmentHealthCheckConfigOutput
}

GatewayVpnAttachmentHealthCheckConfigInput is an input type that accepts GatewayVpnAttachmentHealthCheckConfigArgs and GatewayVpnAttachmentHealthCheckConfigOutput values. You can construct a concrete instance of `GatewayVpnAttachmentHealthCheckConfigInput` via: 

GatewayVpnAttachmentHealthCheckConfigArgs{...}

type GatewayVpnAttachmentHealthCheckConfigOutput added in v3.28.0 

type GatewayVpnAttachmentHealthCheckConfigOutput struct{ *pulumi.OutputState }

func (GatewayVpnAttachmentHealthCheckConfigOutput) Dip added in v3.28.0 

func (o GatewayVpnAttachmentHealthCheckConfigOutput) Dip() pulumi.StringPtrOutput

The destination IP address that is used for health checks.

func (GatewayVpnAttachmentHealthCheckConfigOutput) ElementType added in v3.28.0 

func (GatewayVpnAttachmentHealthCheckConfigOutput) ElementType() reflect.Type

func (GatewayVpnAttachmentHealthCheckConfigOutput) Enable added in v3.28.0 

func (o GatewayVpnAttachmentHealthCheckConfigOutput) Enable() pulumi.BoolPtrOutput

Specifies whether to enable health checks.

func (GatewayVpnAttachmentHealthCheckConfigOutput) Interval added in v3.28.0 

func (o GatewayVpnAttachmentHealthCheckConfigOutput) Interval() pulumi.IntPtrOutput

The interval between two consecutive health checks. Unit: seconds.

func (GatewayVpnAttachmentHealthCheckConfigOutput) Policy added in v3.28.0 

func (o GatewayVpnAttachmentHealthCheckConfigOutput) Policy() pulumi.StringPtrOutput

Whether to revoke the published route when the health check fails. Valid values: `revokeRoute` or `reserveRoute`.

func (GatewayVpnAttachmentHealthCheckConfigOutput) Retry added in v3.28.0 

func (o GatewayVpnAttachmentHealthCheckConfigOutput) Retry() pulumi.IntPtrOutput

The maximum number of health check retries.

func (GatewayVpnAttachmentHealthCheckConfigOutput) Sip added in v3.28.0 

func (o GatewayVpnAttachmentHealthCheckConfigOutput) Sip() pulumi.StringPtrOutput

The source IP address that is used for health checks.

func (GatewayVpnAttachmentHealthCheckConfigOutput) ToGatewayVpnAttachmentHealthCheckConfigOutput added in v3.28.0 

func (o GatewayVpnAttachmentHealthCheckConfigOutput) ToGatewayVpnAttachmentHealthCheckConfigOutput() GatewayVpnAttachmentHealthCheckConfigOutput

func (GatewayVpnAttachmentHealthCheckConfigOutput) ToGatewayVpnAttachmentHealthCheckConfigOutputWithContext added in v3.28.0 

func (o GatewayVpnAttachmentHealthCheckConfigOutput) ToGatewayVpnAttachmentHealthCheckConfigOutputWithContext(ctx context.Context) GatewayVpnAttachmentHealthCheckConfigOutput

func (GatewayVpnAttachmentHealthCheckConfigOutput) ToGatewayVpnAttachmentHealthCheckConfigPtrOutput added in v3.28.0 

func (o GatewayVpnAttachmentHealthCheckConfigOutput) ToGatewayVpnAttachmentHealthCheckConfigPtrOutput() GatewayVpnAttachmentHealthCheckConfigPtrOutput

func (GatewayVpnAttachmentHealthCheckConfigOutput) ToGatewayVpnAttachmentHealthCheckConfigPtrOutputWithContext added in v3.28.0 

func (o GatewayVpnAttachmentHealthCheckConfigOutput) ToGatewayVpnAttachmentHealthCheckConfigPtrOutputWithContext(ctx context.Context) GatewayVpnAttachmentHealthCheckConfigPtrOutput

func (GatewayVpnAttachmentHealthCheckConfigOutput) ToOutput added in v3.43.1 

func (o GatewayVpnAttachmentHealthCheckConfigOutput) ToOutput(ctx context.Context) pulumix.Output[GatewayVpnAttachmentHealthCheckConfig]

type GatewayVpnAttachmentHealthCheckConfigPtrInput added in v3.28.0 

type GatewayVpnAttachmentHealthCheckConfigPtrInput interface {
	pulumi.Input

	ToGatewayVpnAttachmentHealthCheckConfigPtrOutput() GatewayVpnAttachmentHealthCheckConfigPtrOutput
	ToGatewayVpnAttachmentHealthCheckConfigPtrOutputWithContext(context.Context) GatewayVpnAttachmentHealthCheckConfigPtrOutput
}

GatewayVpnAttachmentHealthCheckConfigPtrInput is an input type that accepts GatewayVpnAttachmentHealthCheckConfigArgs, GatewayVpnAttachmentHealthCheckConfigPtr and GatewayVpnAttachmentHealthCheckConfigPtrOutput values. You can construct a concrete instance of `GatewayVpnAttachmentHealthCheckConfigPtrInput` via: 

        GatewayVpnAttachmentHealthCheckConfigArgs{...}

or:

        nil

func GatewayVpnAttachmentHealthCheckConfigPtr added in v3.28.0 

func GatewayVpnAttachmentHealthCheckConfigPtr(v *GatewayVpnAttachmentHealthCheckConfigArgs) GatewayVpnAttachmentHealthCheckConfigPtrInput

type GatewayVpnAttachmentHealthCheckConfigPtrOutput added in v3.28.0 

type GatewayVpnAttachmentHealthCheckConfigPtrOutput struct{ *pulumi.OutputState }

func (GatewayVpnAttachmentHealthCheckConfigPtrOutput) Dip added in v3.28.0 

func (o GatewayVpnAttachmentHealthCheckConfigPtrOutput) Dip() pulumi.StringPtrOutput

The destination IP address that is used for health checks.

func (GatewayVpnAttachmentHealthCheckConfigPtrOutput) Elem added in v3.28.0 

func (o GatewayVpnAttachmentHealthCheckConfigPtrOutput) Elem() GatewayVpnAttachmentHealthCheckConfigOutput

func (GatewayVpnAttachmentHealthCheckConfigPtrOutput) ElementType added in v3.28.0 

func (GatewayVpnAttachmentHealthCheckConfigPtrOutput) ElementType() reflect.Type

func (GatewayVpnAttachmentHealthCheckConfigPtrOutput) Enable added in v3.28.0 

func (o GatewayVpnAttachmentHealthCheckConfigPtrOutput) Enable() pulumi.BoolPtrOutput

Specifies whether to enable health checks.

func (GatewayVpnAttachmentHealthCheckConfigPtrOutput) Interval added in v3.28.0 

func (o GatewayVpnAttachmentHealthCheckConfigPtrOutput) Interval() pulumi.IntPtrOutput

The interval between two consecutive health checks. Unit: seconds.

func (GatewayVpnAttachmentHealthCheckConfigPtrOutput) Policy added in v3.28.0 

func (o GatewayVpnAttachmentHealthCheckConfigPtrOutput) Policy() pulumi.StringPtrOutput

Whether to revoke the published route when the health check fails. Valid values: `revokeRoute` or `reserveRoute`.

func (GatewayVpnAttachmentHealthCheckConfigPtrOutput) Retry added in v3.28.0 

func (o GatewayVpnAttachmentHealthCheckConfigPtrOutput) Retry() pulumi.IntPtrOutput

The maximum number of health check retries.

func (GatewayVpnAttachmentHealthCheckConfigPtrOutput) Sip added in v3.28.0 

func (o GatewayVpnAttachmentHealthCheckConfigPtrOutput) Sip() pulumi.StringPtrOutput

The source IP address that is used for health checks.

func (GatewayVpnAttachmentHealthCheckConfigPtrOutput) ToGatewayVpnAttachmentHealthCheckConfigPtrOutput added in v3.28.0 

func (o GatewayVpnAttachmentHealthCheckConfigPtrOutput) ToGatewayVpnAttachmentHealthCheckConfigPtrOutput() GatewayVpnAttachmentHealthCheckConfigPtrOutput

func (GatewayVpnAttachmentHealthCheckConfigPtrOutput) ToGatewayVpnAttachmentHealthCheckConfigPtrOutputWithContext added in v3.28.0 

func (o GatewayVpnAttachmentHealthCheckConfigPtrOutput) ToGatewayVpnAttachmentHealthCheckConfigPtrOutputWithContext(ctx context.Context) GatewayVpnAttachmentHealthCheckConfigPtrOutput

func (GatewayVpnAttachmentHealthCheckConfigPtrOutput) ToOutput added in v3.43.1 

func (o GatewayVpnAttachmentHealthCheckConfigPtrOutput) ToOutput(ctx context.Context) pulumix.Output[*GatewayVpnAttachmentHealthCheckConfig]

type GatewayVpnAttachmentIkeConfig added in v3.28.0 

type GatewayVpnAttachmentIkeConfig struct {
	// IKE authentication algorithm supports sha1 and MD5.
	IkeAuthAlg *string `pulumi:"ikeAuthAlg"`
	// The encryption algorithm of phase-one negotiation. Valid value: aes | aes192 | aes256 | des | 3des. Default Valid value: aes.
	IkeEncAlg *string `pulumi:"ikeEncAlg"`
	// The SA lifecycle as the result of phase-one negotiation. The valid value of n is [0, 86400], the unit is second and the default value is 86400.
	IkeLifetime *int `pulumi:"ikeLifetime"`
	// The negotiation mode of IKE V1. Valid value: main (main mode) | aggressive (aggressive mode). Default value: `main`.
	IkeMode *string `pulumi:"ikeMode"`
	// The Diffie-Hellman key exchange algorithm used by phase-one negotiation. Valid value: group1 | group2 | group5 | group14 | group24. Default value: group2
	IkePfs *string `pulumi:"ikePfs"`
	// The version of the IKE protocol. Valid value: `ikev1`, `ikev2`. Default value: `ikev1`.
	IkeVersion *string `pulumi:"ikeVersion"`
	// The local ID, which supports the FQDN and IP formats. The current VPN gateway IP address is selected by default.
	LocalId *string `pulumi:"localId"`
	// Used for authentication between the IPsec VPN gateway and the customer gateway.
	Psk *string `pulumi:"psk"`
	// The peer ID, which supports FQDN and IP formats. By default, the IP address of the currently selected user gateway.
	RemoteId *string `pulumi:"remoteId"`
}

type GatewayVpnAttachmentIkeConfigArgs added in v3.28.0 

type GatewayVpnAttachmentIkeConfigArgs struct {
	// IKE authentication algorithm supports sha1 and MD5.
	IkeAuthAlg pulumi.StringPtrInput `pulumi:"ikeAuthAlg"`
	// The encryption algorithm of phase-one negotiation. Valid value: aes | aes192 | aes256 | des | 3des. Default Valid value: aes.
	IkeEncAlg pulumi.StringPtrInput `pulumi:"ikeEncAlg"`
	// The SA lifecycle as the result of phase-one negotiation. The valid value of n is [0, 86400], the unit is second and the default value is 86400.
	IkeLifetime pulumi.IntPtrInput `pulumi:"ikeLifetime"`
	// The negotiation mode of IKE V1. Valid value: main (main mode) | aggressive (aggressive mode). Default value: `main`.
	IkeMode pulumi.StringPtrInput `pulumi:"ikeMode"`
	// The Diffie-Hellman key exchange algorithm used by phase-one negotiation. Valid value: group1 | group2 | group5 | group14 | group24. Default value: group2
	IkePfs pulumi.StringPtrInput `pulumi:"ikePfs"`
	// The version of the IKE protocol. Valid value: `ikev1`, `ikev2`. Default value: `ikev1`.
	IkeVersion pulumi.StringPtrInput `pulumi:"ikeVersion"`
	// The local ID, which supports the FQDN and IP formats. The current VPN gateway IP address is selected by default.
	LocalId pulumi.StringPtrInput `pulumi:"localId"`
	// Used for authentication between the IPsec VPN gateway and the customer gateway.
	Psk pulumi.StringPtrInput `pulumi:"psk"`
	// The peer ID, which supports FQDN and IP formats. By default, the IP address of the currently selected user gateway.
	RemoteId pulumi.StringPtrInput `pulumi:"remoteId"`
}

func (GatewayVpnAttachmentIkeConfigArgs) ElementType added in v3.28.0 

func (GatewayVpnAttachmentIkeConfigArgs) ElementType() reflect.Type

func (GatewayVpnAttachmentIkeConfigArgs) ToGatewayVpnAttachmentIkeConfigOutput added in v3.28.0 

func (i GatewayVpnAttachmentIkeConfigArgs) ToGatewayVpnAttachmentIkeConfigOutput() GatewayVpnAttachmentIkeConfigOutput

func (GatewayVpnAttachmentIkeConfigArgs) ToGatewayVpnAttachmentIkeConfigOutputWithContext added in v3.28.0 

func (i GatewayVpnAttachmentIkeConfigArgs) ToGatewayVpnAttachmentIkeConfigOutputWithContext(ctx context.Context) GatewayVpnAttachmentIkeConfigOutput

func (GatewayVpnAttachmentIkeConfigArgs) ToGatewayVpnAttachmentIkeConfigPtrOutput added in v3.28.0 

func (i GatewayVpnAttachmentIkeConfigArgs) ToGatewayVpnAttachmentIkeConfigPtrOutput() GatewayVpnAttachmentIkeConfigPtrOutput

func (GatewayVpnAttachmentIkeConfigArgs) ToGatewayVpnAttachmentIkeConfigPtrOutputWithContext added in v3.28.0 

func (i GatewayVpnAttachmentIkeConfigArgs) ToGatewayVpnAttachmentIkeConfigPtrOutputWithContext(ctx context.Context) GatewayVpnAttachmentIkeConfigPtrOutput

func (GatewayVpnAttachmentIkeConfigArgs) ToOutput added in v3.43.1 

func (i GatewayVpnAttachmentIkeConfigArgs) ToOutput(ctx context.Context) pulumix.Output[GatewayVpnAttachmentIkeConfig]

type GatewayVpnAttachmentIkeConfigInput added in v3.28.0 

type GatewayVpnAttachmentIkeConfigInput interface {
	pulumi.Input

	ToGatewayVpnAttachmentIkeConfigOutput() GatewayVpnAttachmentIkeConfigOutput
	ToGatewayVpnAttachmentIkeConfigOutputWithContext(context.Context) GatewayVpnAttachmentIkeConfigOutput
}

GatewayVpnAttachmentIkeConfigInput is an input type that accepts GatewayVpnAttachmentIkeConfigArgs and GatewayVpnAttachmentIkeConfigOutput values. You can construct a concrete instance of `GatewayVpnAttachmentIkeConfigInput` via: 

GatewayVpnAttachmentIkeConfigArgs{...}

type GatewayVpnAttachmentIkeConfigOutput added in v3.28.0 

type GatewayVpnAttachmentIkeConfigOutput struct{ *pulumi.OutputState }

func (GatewayVpnAttachmentIkeConfigOutput) ElementType added in v3.28.0 

func (GatewayVpnAttachmentIkeConfigOutput) ElementType() reflect.Type

func (GatewayVpnAttachmentIkeConfigOutput) IkeAuthAlg added in v3.28.0 

func (o GatewayVpnAttachmentIkeConfigOutput) IkeAuthAlg() pulumi.StringPtrOutput

IKE authentication algorithm supports sha1 and MD5.

func (GatewayVpnAttachmentIkeConfigOutput) IkeEncAlg added in v3.28.0 

func (o GatewayVpnAttachmentIkeConfigOutput) IkeEncAlg() pulumi.StringPtrOutput

The encryption algorithm of phase-one negotiation. Valid value: aes | aes192 | aes256 | des | 3des. Default Valid value: aes.

func (GatewayVpnAttachmentIkeConfigOutput) IkeLifetime added in v3.28.0 

func (o GatewayVpnAttachmentIkeConfigOutput) IkeLifetime() pulumi.IntPtrOutput

The SA lifecycle as the result of phase-one negotiation. The valid value of n is [0, 86400], the unit is second and the default value is 86400.

func (GatewayVpnAttachmentIkeConfigOutput) IkeMode added in v3.28.0 

func (o GatewayVpnAttachmentIkeConfigOutput) IkeMode() pulumi.StringPtrOutput

The negotiation mode of IKE V1. Valid value: main (main mode) | aggressive (aggressive mode). Default value: `main`.

func (GatewayVpnAttachmentIkeConfigOutput) IkePfs added in v3.28.0 

func (o GatewayVpnAttachmentIkeConfigOutput) IkePfs() pulumi.StringPtrOutput

The Diffie-Hellman key exchange algorithm used by phase-one negotiation. Valid value: group1 | group2 | group5 | group14 | group24. Default value: group2

func (GatewayVpnAttachmentIkeConfigOutput) IkeVersion added in v3.28.0 

func (o GatewayVpnAttachmentIkeConfigOutput) IkeVersion() pulumi.StringPtrOutput

The version of the IKE protocol. Valid value: `ikev1`, `ikev2`. Default value: `ikev1`.

func (GatewayVpnAttachmentIkeConfigOutput) LocalId added in v3.28.0 

func (o GatewayVpnAttachmentIkeConfigOutput) LocalId() pulumi.StringPtrOutput

The local ID, which supports the FQDN and IP formats. The current VPN gateway IP address is selected by default.

func (GatewayVpnAttachmentIkeConfigOutput) Psk added in v3.28.0 

func (o GatewayVpnAttachmentIkeConfigOutput) Psk() pulumi.StringPtrOutput

Used for authentication between the IPsec VPN gateway and the customer gateway.

func (GatewayVpnAttachmentIkeConfigOutput) RemoteId added in v3.28.0 

func (o GatewayVpnAttachmentIkeConfigOutput) RemoteId() pulumi.StringPtrOutput

The peer ID, which supports FQDN and IP formats. By default, the IP address of the currently selected user gateway.

func (GatewayVpnAttachmentIkeConfigOutput) ToGatewayVpnAttachmentIkeConfigOutput added in v3.28.0 

func (o GatewayVpnAttachmentIkeConfigOutput) ToGatewayVpnAttachmentIkeConfigOutput() GatewayVpnAttachmentIkeConfigOutput

func (GatewayVpnAttachmentIkeConfigOutput) ToGatewayVpnAttachmentIkeConfigOutputWithContext added in v3.28.0 

func (o GatewayVpnAttachmentIkeConfigOutput) ToGatewayVpnAttachmentIkeConfigOutputWithContext(ctx context.Context) GatewayVpnAttachmentIkeConfigOutput

func (GatewayVpnAttachmentIkeConfigOutput) ToGatewayVpnAttachmentIkeConfigPtrOutput added in v3.28.0 

func (o GatewayVpnAttachmentIkeConfigOutput) ToGatewayVpnAttachmentIkeConfigPtrOutput() GatewayVpnAttachmentIkeConfigPtrOutput

func (GatewayVpnAttachmentIkeConfigOutput) ToGatewayVpnAttachmentIkeConfigPtrOutputWithContext added in v3.28.0 

func (o GatewayVpnAttachmentIkeConfigOutput) ToGatewayVpnAttachmentIkeConfigPtrOutputWithContext(ctx context.Context) GatewayVpnAttachmentIkeConfigPtrOutput

func (GatewayVpnAttachmentIkeConfigOutput) ToOutput added in v3.43.1 

func (o GatewayVpnAttachmentIkeConfigOutput) ToOutput(ctx context.Context) pulumix.Output[GatewayVpnAttachmentIkeConfig]

type GatewayVpnAttachmentIkeConfigPtrInput added in v3.28.0 

type GatewayVpnAttachmentIkeConfigPtrInput interface {
	pulumi.Input

	ToGatewayVpnAttachmentIkeConfigPtrOutput() GatewayVpnAttachmentIkeConfigPtrOutput
	ToGatewayVpnAttachmentIkeConfigPtrOutputWithContext(context.Context) GatewayVpnAttachmentIkeConfigPtrOutput
}

GatewayVpnAttachmentIkeConfigPtrInput is an input type that accepts GatewayVpnAttachmentIkeConfigArgs, GatewayVpnAttachmentIkeConfigPtr and GatewayVpnAttachmentIkeConfigPtrOutput values. You can construct a concrete instance of `GatewayVpnAttachmentIkeConfigPtrInput` via: 

        GatewayVpnAttachmentIkeConfigArgs{...}

or:

        nil

func GatewayVpnAttachmentIkeConfigPtr added in v3.28.0 

func GatewayVpnAttachmentIkeConfigPtr(v *GatewayVpnAttachmentIkeConfigArgs) GatewayVpnAttachmentIkeConfigPtrInput

type GatewayVpnAttachmentIkeConfigPtrOutput added in v3.28.0 

type GatewayVpnAttachmentIkeConfigPtrOutput struct{ *pulumi.OutputState }

func (GatewayVpnAttachmentIkeConfigPtrOutput) Elem added in v3.28.0 

func (o GatewayVpnAttachmentIkeConfigPtrOutput) Elem() GatewayVpnAttachmentIkeConfigOutput

func (GatewayVpnAttachmentIkeConfigPtrOutput) ElementType added in v3.28.0 

func (GatewayVpnAttachmentIkeConfigPtrOutput) ElementType() reflect.Type

func (GatewayVpnAttachmentIkeConfigPtrOutput) IkeAuthAlg added in v3.28.0 

func (o GatewayVpnAttachmentIkeConfigPtrOutput) IkeAuthAlg() pulumi.StringPtrOutput

IKE authentication algorithm supports sha1 and MD5.

func (GatewayVpnAttachmentIkeConfigPtrOutput) IkeEncAlg added in v3.28.0 

func (o GatewayVpnAttachmentIkeConfigPtrOutput) IkeEncAlg() pulumi.StringPtrOutput

The encryption algorithm of phase-one negotiation. Valid value: aes | aes192 | aes256 | des | 3des. Default Valid value: aes.

func (GatewayVpnAttachmentIkeConfigPtrOutput) IkeLifetime added in v3.28.0 

func (o GatewayVpnAttachmentIkeConfigPtrOutput) IkeLifetime() pulumi.IntPtrOutput

The SA lifecycle as the result of phase-one negotiation. The valid value of n is [0, 86400], the unit is second and the default value is 86400.

func (GatewayVpnAttachmentIkeConfigPtrOutput) IkeMode added in v3.28.0 

func (o GatewayVpnAttachmentIkeConfigPtrOutput) IkeMode() pulumi.StringPtrOutput

The negotiation mode of IKE V1. Valid value: main (main mode) | aggressive (aggressive mode). Default value: `main`.

func (GatewayVpnAttachmentIkeConfigPtrOutput) IkePfs added in v3.28.0 

func (o GatewayVpnAttachmentIkeConfigPtrOutput) IkePfs() pulumi.StringPtrOutput

The Diffie-Hellman key exchange algorithm used by phase-one negotiation. Valid value: group1 | group2 | group5 | group14 | group24. Default value: group2

func (GatewayVpnAttachmentIkeConfigPtrOutput) IkeVersion added in v3.28.0 

func (o GatewayVpnAttachmentIkeConfigPtrOutput) IkeVersion() pulumi.StringPtrOutput

The version of the IKE protocol. Valid value: `ikev1`, `ikev2`. Default value: `ikev1`.

func (GatewayVpnAttachmentIkeConfigPtrOutput) LocalId added in v3.28.0 

func (o GatewayVpnAttachmentIkeConfigPtrOutput) LocalId() pulumi.StringPtrOutput

The local ID, which supports the FQDN and IP formats. The current VPN gateway IP address is selected by default.

func (GatewayVpnAttachmentIkeConfigPtrOutput) Psk added in v3.28.0 

func (o GatewayVpnAttachmentIkeConfigPtrOutput) Psk() pulumi.StringPtrOutput

Used for authentication between the IPsec VPN gateway and the customer gateway.

func (GatewayVpnAttachmentIkeConfigPtrOutput) RemoteId added in v3.28.0 

func (o GatewayVpnAttachmentIkeConfigPtrOutput) RemoteId() pulumi.StringPtrOutput

The peer ID, which supports FQDN and IP formats. By default, the IP address of the currently selected user gateway.

func (GatewayVpnAttachmentIkeConfigPtrOutput) ToGatewayVpnAttachmentIkeConfigPtrOutput added in v3.28.0 

func (o GatewayVpnAttachmentIkeConfigPtrOutput) ToGatewayVpnAttachmentIkeConfigPtrOutput() GatewayVpnAttachmentIkeConfigPtrOutput

func (GatewayVpnAttachmentIkeConfigPtrOutput) ToGatewayVpnAttachmentIkeConfigPtrOutputWithContext added in v3.28.0 

func (o GatewayVpnAttachmentIkeConfigPtrOutput) ToGatewayVpnAttachmentIkeConfigPtrOutputWithContext(ctx context.Context) GatewayVpnAttachmentIkeConfigPtrOutput

func (GatewayVpnAttachmentIkeConfigPtrOutput) ToOutput added in v3.43.1 

func (o GatewayVpnAttachmentIkeConfigPtrOutput) ToOutput(ctx context.Context) pulumix.Output[*GatewayVpnAttachmentIkeConfig]

type GatewayVpnAttachmentInput added in v3.28.0 

type GatewayVpnAttachmentInput interface {
	pulumi.Input

	ToGatewayVpnAttachmentOutput() GatewayVpnAttachmentOutput
	ToGatewayVpnAttachmentOutputWithContext(ctx context.Context) GatewayVpnAttachmentOutput
}

type GatewayVpnAttachmentIpsecConfig added in v3.28.0 

type GatewayVpnAttachmentIpsecConfig struct {
	// The authentication algorithm of phase-two negotiation. Valid value: md5 | sha1 | sha256 | sha384 | sha512 |. Default value: sha1
	IpsecAuthAlg *string `pulumi:"ipsecAuthAlg"`
	// The encryption algorithm of phase-two negotiation. Valid value: aes | aes192 | aes256 | des | 3des. Default value: aes
	IpsecEncAlg *string `pulumi:"ipsecEncAlg"`
	// The SA lifecycle as the result of phase-two negotiation. The valid value is [0, 86400], the unit is second and the default value is 86400.
	IpsecLifetime *int `pulumi:"ipsecLifetime"`
	// The Diffie-Hellman key exchange algorithm used by phase-two negotiation. Valid value: group1 | group2 | group5 | group14 | group24| disabled. Default value: group2
	IpsecPfs *string `pulumi:"ipsecPfs"`
}

type GatewayVpnAttachmentIpsecConfigArgs added in v3.28.0 

type GatewayVpnAttachmentIpsecConfigArgs struct {
	// The authentication algorithm of phase-two negotiation. Valid value: md5 | sha1 | sha256 | sha384 | sha512 |. Default value: sha1
	IpsecAuthAlg pulumi.StringPtrInput `pulumi:"ipsecAuthAlg"`
	// The encryption algorithm of phase-two negotiation. Valid value: aes | aes192 | aes256 | des | 3des. Default value: aes
	IpsecEncAlg pulumi.StringPtrInput `pulumi:"ipsecEncAlg"`
	// The SA lifecycle as the result of phase-two negotiation. The valid value is [0, 86400], the unit is second and the default value is 86400.
	IpsecLifetime pulumi.IntPtrInput `pulumi:"ipsecLifetime"`
	// The Diffie-Hellman key exchange algorithm used by phase-two negotiation. Valid value: group1 | group2 | group5 | group14 | group24| disabled. Default value: group2
	IpsecPfs pulumi.StringPtrInput `pulumi:"ipsecPfs"`
}

func (GatewayVpnAttachmentIpsecConfigArgs) ElementType added in v3.28.0 

func (GatewayVpnAttachmentIpsecConfigArgs) ElementType() reflect.Type

func (GatewayVpnAttachmentIpsecConfigArgs) ToGatewayVpnAttachmentIpsecConfigOutput added in v3.28.0 

func (i GatewayVpnAttachmentIpsecConfigArgs) ToGatewayVpnAttachmentIpsecConfigOutput() GatewayVpnAttachmentIpsecConfigOutput

func (GatewayVpnAttachmentIpsecConfigArgs) ToGatewayVpnAttachmentIpsecConfigOutputWithContext added in v3.28.0 

func (i GatewayVpnAttachmentIpsecConfigArgs) ToGatewayVpnAttachmentIpsecConfigOutputWithContext(ctx context.Context) GatewayVpnAttachmentIpsecConfigOutput

func (GatewayVpnAttachmentIpsecConfigArgs) ToGatewayVpnAttachmentIpsecConfigPtrOutput added in v3.28.0 

func (i GatewayVpnAttachmentIpsecConfigArgs) ToGatewayVpnAttachmentIpsecConfigPtrOutput() GatewayVpnAttachmentIpsecConfigPtrOutput

func (GatewayVpnAttachmentIpsecConfigArgs) ToGatewayVpnAttachmentIpsecConfigPtrOutputWithContext added in v3.28.0 

func (i GatewayVpnAttachmentIpsecConfigArgs) ToGatewayVpnAttachmentIpsecConfigPtrOutputWithContext(ctx context.Context) GatewayVpnAttachmentIpsecConfigPtrOutput

func (GatewayVpnAttachmentIpsecConfigArgs) ToOutput added in v3.43.1 

func (i GatewayVpnAttachmentIpsecConfigArgs) ToOutput(ctx context.Context) pulumix.Output[GatewayVpnAttachmentIpsecConfig]

type GatewayVpnAttachmentIpsecConfigInput added in v3.28.0 

type GatewayVpnAttachmentIpsecConfigInput interface {
	pulumi.Input

	ToGatewayVpnAttachmentIpsecConfigOutput() GatewayVpnAttachmentIpsecConfigOutput
	ToGatewayVpnAttachmentIpsecConfigOutputWithContext(context.Context) GatewayVpnAttachmentIpsecConfigOutput
}

GatewayVpnAttachmentIpsecConfigInput is an input type that accepts GatewayVpnAttachmentIpsecConfigArgs and GatewayVpnAttachmentIpsecConfigOutput values. You can construct a concrete instance of `GatewayVpnAttachmentIpsecConfigInput` via: 

GatewayVpnAttachmentIpsecConfigArgs{...}

type GatewayVpnAttachmentIpsecConfigOutput added in v3.28.0 

type GatewayVpnAttachmentIpsecConfigOutput struct{ *pulumi.OutputState }

func (GatewayVpnAttachmentIpsecConfigOutput) ElementType added in v3.28.0 

func (GatewayVpnAttachmentIpsecConfigOutput) ElementType() reflect.Type

func (GatewayVpnAttachmentIpsecConfigOutput) IpsecAuthAlg added in v3.28.0 

func (o GatewayVpnAttachmentIpsecConfigOutput) IpsecAuthAlg() pulumi.StringPtrOutput

The authentication algorithm of phase-two negotiation. Valid value: md5 | sha1 | sha256 | sha384 | sha512 |. Default value: sha1

func (GatewayVpnAttachmentIpsecConfigOutput) IpsecEncAlg added in v3.28.0 

func (o GatewayVpnAttachmentIpsecConfigOutput) IpsecEncAlg() pulumi.StringPtrOutput

The encryption algorithm of phase-two negotiation. Valid value: aes | aes192 | aes256 | des | 3des. Default value: aes

func (GatewayVpnAttachmentIpsecConfigOutput) IpsecLifetime added in v3.28.0 

func (o GatewayVpnAttachmentIpsecConfigOutput) IpsecLifetime() pulumi.IntPtrOutput

The SA lifecycle as the result of phase-two negotiation. The valid value is [0, 86400], the unit is second and the default value is 86400.

func (GatewayVpnAttachmentIpsecConfigOutput) IpsecPfs added in v3.28.0 

func (o GatewayVpnAttachmentIpsecConfigOutput) IpsecPfs() pulumi.StringPtrOutput

The Diffie-Hellman key exchange algorithm used by phase-two negotiation. Valid value: group1 | group2 | group5 | group14 | group24| disabled. Default value: group2

func (GatewayVpnAttachmentIpsecConfigOutput) ToGatewayVpnAttachmentIpsecConfigOutput added in v3.28.0 

func (o GatewayVpnAttachmentIpsecConfigOutput) ToGatewayVpnAttachmentIpsecConfigOutput() GatewayVpnAttachmentIpsecConfigOutput

func (GatewayVpnAttachmentIpsecConfigOutput) ToGatewayVpnAttachmentIpsecConfigOutputWithContext added in v3.28.0 

func (o GatewayVpnAttachmentIpsecConfigOutput) ToGatewayVpnAttachmentIpsecConfigOutputWithContext(ctx context.Context) GatewayVpnAttachmentIpsecConfigOutput

func (GatewayVpnAttachmentIpsecConfigOutput) ToGatewayVpnAttachmentIpsecConfigPtrOutput added in v3.28.0 

func (o GatewayVpnAttachmentIpsecConfigOutput) ToGatewayVpnAttachmentIpsecConfigPtrOutput() GatewayVpnAttachmentIpsecConfigPtrOutput

func (GatewayVpnAttachmentIpsecConfigOutput) ToGatewayVpnAttachmentIpsecConfigPtrOutputWithContext added in v3.28.0 

func (o GatewayVpnAttachmentIpsecConfigOutput) ToGatewayVpnAttachmentIpsecConfigPtrOutputWithContext(ctx context.Context) GatewayVpnAttachmentIpsecConfigPtrOutput

func (GatewayVpnAttachmentIpsecConfigOutput) ToOutput added in v3.43.1 

func (o GatewayVpnAttachmentIpsecConfigOutput) ToOutput(ctx context.Context) pulumix.Output[GatewayVpnAttachmentIpsecConfig]

type GatewayVpnAttachmentIpsecConfigPtrInput added in v3.28.0 

type GatewayVpnAttachmentIpsecConfigPtrInput interface {
	pulumi.Input

	ToGatewayVpnAttachmentIpsecConfigPtrOutput() GatewayVpnAttachmentIpsecConfigPtrOutput
	ToGatewayVpnAttachmentIpsecConfigPtrOutputWithContext(context.Context) GatewayVpnAttachmentIpsecConfigPtrOutput
}

GatewayVpnAttachmentIpsecConfigPtrInput is an input type that accepts GatewayVpnAttachmentIpsecConfigArgs, GatewayVpnAttachmentIpsecConfigPtr and GatewayVpnAttachmentIpsecConfigPtrOutput values. You can construct a concrete instance of `GatewayVpnAttachmentIpsecConfigPtrInput` via: 

        GatewayVpnAttachmentIpsecConfigArgs{...}

or:

        nil

func GatewayVpnAttachmentIpsecConfigPtr added in v3.28.0 

func GatewayVpnAttachmentIpsecConfigPtr(v *GatewayVpnAttachmentIpsecConfigArgs) GatewayVpnAttachmentIpsecConfigPtrInput

type GatewayVpnAttachmentIpsecConfigPtrOutput added in v3.28.0 

type GatewayVpnAttachmentIpsecConfigPtrOutput struct{ *pulumi.OutputState }

func (GatewayVpnAttachmentIpsecConfigPtrOutput) Elem added in v3.28.0 

func (o GatewayVpnAttachmentIpsecConfigPtrOutput) Elem() GatewayVpnAttachmentIpsecConfigOutput

func (GatewayVpnAttachmentIpsecConfigPtrOutput) ElementType added in v3.28.0 

func (GatewayVpnAttachmentIpsecConfigPtrOutput) ElementType() reflect.Type

func (GatewayVpnAttachmentIpsecConfigPtrOutput) IpsecAuthAlg added in v3.28.0 

func (o GatewayVpnAttachmentIpsecConfigPtrOutput) IpsecAuthAlg() pulumi.StringPtrOutput

The authentication algorithm of phase-two negotiation. Valid value: md5 | sha1 | sha256 | sha384 | sha512 |. Default value: sha1

func (GatewayVpnAttachmentIpsecConfigPtrOutput) IpsecEncAlg added in v3.28.0 

func (o GatewayVpnAttachmentIpsecConfigPtrOutput) IpsecEncAlg() pulumi.StringPtrOutput

The encryption algorithm of phase-two negotiation. Valid value: aes | aes192 | aes256 | des | 3des. Default value: aes

func (GatewayVpnAttachmentIpsecConfigPtrOutput) IpsecLifetime added in v3.28.0 

func (o GatewayVpnAttachmentIpsecConfigPtrOutput) IpsecLifetime() pulumi.IntPtrOutput

The SA lifecycle as the result of phase-two negotiation. The valid value is [0, 86400], the unit is second and the default value is 86400.

func (GatewayVpnAttachmentIpsecConfigPtrOutput) IpsecPfs added in v3.28.0 

func (o GatewayVpnAttachmentIpsecConfigPtrOutput) IpsecPfs() pulumi.StringPtrOutput

The Diffie-Hellman key exchange algorithm used by phase-two negotiation. Valid value: group1 | group2 | group5 | group14 | group24| disabled. Default value: group2

func (GatewayVpnAttachmentIpsecConfigPtrOutput) ToGatewayVpnAttachmentIpsecConfigPtrOutput added in v3.28.0 

func (o GatewayVpnAttachmentIpsecConfigPtrOutput) ToGatewayVpnAttachmentIpsecConfigPtrOutput() GatewayVpnAttachmentIpsecConfigPtrOutput

func (GatewayVpnAttachmentIpsecConfigPtrOutput) ToGatewayVpnAttachmentIpsecConfigPtrOutputWithContext added in v3.28.0 

func (o GatewayVpnAttachmentIpsecConfigPtrOutput) ToGatewayVpnAttachmentIpsecConfigPtrOutputWithContext(ctx context.Context) GatewayVpnAttachmentIpsecConfigPtrOutput

func (GatewayVpnAttachmentIpsecConfigPtrOutput) ToOutput added in v3.43.1 

func (o GatewayVpnAttachmentIpsecConfigPtrOutput) ToOutput(ctx context.Context) pulumix.Output[*GatewayVpnAttachmentIpsecConfig]

type GatewayVpnAttachmentMap added in v3.28.0 

type GatewayVpnAttachmentMap map[string]GatewayVpnAttachmentInput

func (GatewayVpnAttachmentMap) ElementType added in v3.28.0 

func (GatewayVpnAttachmentMap) ElementType() reflect.Type

func (GatewayVpnAttachmentMap) ToGatewayVpnAttachmentMapOutput added in v3.28.0 

func (i GatewayVpnAttachmentMap) ToGatewayVpnAttachmentMapOutput() GatewayVpnAttachmentMapOutput

func (GatewayVpnAttachmentMap) ToGatewayVpnAttachmentMapOutputWithContext added in v3.28.0 

func (i GatewayVpnAttachmentMap) ToGatewayVpnAttachmentMapOutputWithContext(ctx context.Context) GatewayVpnAttachmentMapOutput

func (GatewayVpnAttachmentMap) ToOutput added in v3.43.1 

func (i GatewayVpnAttachmentMap) ToOutput(ctx context.Context) pulumix.Output[map[string]*GatewayVpnAttachment]

type GatewayVpnAttachmentMapInput added in v3.28.0 

type GatewayVpnAttachmentMapInput interface {
	pulumi.Input

	ToGatewayVpnAttachmentMapOutput() GatewayVpnAttachmentMapOutput
	ToGatewayVpnAttachmentMapOutputWithContext(context.Context) GatewayVpnAttachmentMapOutput
}

GatewayVpnAttachmentMapInput is an input type that accepts GatewayVpnAttachmentMap and GatewayVpnAttachmentMapOutput values. You can construct a concrete instance of `GatewayVpnAttachmentMapInput` via: 

GatewayVpnAttachmentMap{ "key": GatewayVpnAttachmentArgs{...} }

type GatewayVpnAttachmentMapOutput added in v3.28.0 

type GatewayVpnAttachmentMapOutput struct{ *pulumi.OutputState }

func (GatewayVpnAttachmentMapOutput) ElementType added in v3.28.0 

func (GatewayVpnAttachmentMapOutput) ElementType() reflect.Type

func (GatewayVpnAttachmentMapOutput) MapIndex added in v3.28.0 

func (o GatewayVpnAttachmentMapOutput) MapIndex(k pulumi.StringInput) GatewayVpnAttachmentOutput

func (GatewayVpnAttachmentMapOutput) ToGatewayVpnAttachmentMapOutput added in v3.28.0 

func (o GatewayVpnAttachmentMapOutput) ToGatewayVpnAttachmentMapOutput() GatewayVpnAttachmentMapOutput

func (GatewayVpnAttachmentMapOutput) ToGatewayVpnAttachmentMapOutputWithContext added in v3.28.0 

func (o GatewayVpnAttachmentMapOutput) ToGatewayVpnAttachmentMapOutputWithContext(ctx context.Context) GatewayVpnAttachmentMapOutput

func (GatewayVpnAttachmentMapOutput) ToOutput added in v3.43.1 

func (o GatewayVpnAttachmentMapOutput) ToOutput(ctx context.Context) pulumix.Output[map[string]*GatewayVpnAttachment]

type GatewayVpnAttachmentOutput added in v3.28.0 

type GatewayVpnAttachmentOutput struct{ *pulumi.OutputState }

func (GatewayVpnAttachmentOutput) BgpConfig added in v3.28.0 

func (o GatewayVpnAttachmentOutput) BgpConfig() GatewayVpnAttachmentBgpConfigOutput

Bgp configuration information. See `bgpConfig` below.

func (GatewayVpnAttachmentOutput) CustomerGatewayId added in v3.28.0 

func (o GatewayVpnAttachmentOutput) CustomerGatewayId() pulumi.StringOutput

The ID of the customer gateway. From version 1.196.0, `customerGatewayId` can be modified.

func (GatewayVpnAttachmentOutput) EffectImmediately added in v3.28.0 

func (o GatewayVpnAttachmentOutput) EffectImmediately() pulumi.BoolPtrOutput

Indicates whether IPsec-VPN negotiations are initiated immediately. Valid values.

func (GatewayVpnAttachmentOutput) ElementType added in v3.28.0 

func (GatewayVpnAttachmentOutput) ElementType() reflect.Type

func (GatewayVpnAttachmentOutput) EnableDpd added in v3.28.0 

func (o GatewayVpnAttachmentOutput) EnableDpd() pulumi.BoolOutput

Whether to enable the DPD (peer survival detection) function.

func (GatewayVpnAttachmentOutput) EnableNatTraversal added in v3.28.0 

func (o GatewayVpnAttachmentOutput) EnableNatTraversal() pulumi.BoolOutput

Allow NAT penetration.

func (GatewayVpnAttachmentOutput) HealthCheckConfig added in v3.28.0 

func (o GatewayVpnAttachmentOutput) HealthCheckConfig() GatewayVpnAttachmentHealthCheckConfigOutput

Health check configuration information. See `healthCheckConfig` below.

func (GatewayVpnAttachmentOutput) IkeConfig added in v3.28.0 

func (o GatewayVpnAttachmentOutput) IkeConfig() GatewayVpnAttachmentIkeConfigOutput

Configuration negotiated in the second stage. See `ikeConfig` below.

func (GatewayVpnAttachmentOutput) InternetIp added in v3.29.0 

func (o GatewayVpnAttachmentOutput) InternetIp() pulumi.StringOutput

The VPN gateway IP.

func (GatewayVpnAttachmentOutput) IpsecConfig added in v3.28.0 

func (o GatewayVpnAttachmentOutput) IpsecConfig() GatewayVpnAttachmentIpsecConfigOutput

Configuration negotiated in the second stage. See `ipsecConfig` below.

func (GatewayVpnAttachmentOutput) LocalSubnet added in v3.28.0 

func (o GatewayVpnAttachmentOutput) LocalSubnet() pulumi.StringOutput

The CIDR block of the virtual private cloud (VPC).

func (GatewayVpnAttachmentOutput) NetworkType added in v3.28.0 

func (o GatewayVpnAttachmentOutput) NetworkType() pulumi.StringOutput

The network type of the IPsec connection. Valid values: `public`, `private`.

func (GatewayVpnAttachmentOutput) RemoteSubnet added in v3.28.0 

func (o GatewayVpnAttachmentOutput) RemoteSubnet() pulumi.StringOutput

The CIDR block of the on-premises data center.

func (GatewayVpnAttachmentOutput) Status added in v3.28.0 

func (o GatewayVpnAttachmentOutput) Status() pulumi.StringOutput

The status of the resource.

func (GatewayVpnAttachmentOutput) ToGatewayVpnAttachmentOutput added in v3.28.0 

func (o GatewayVpnAttachmentOutput) ToGatewayVpnAttachmentOutput() GatewayVpnAttachmentOutput

func (GatewayVpnAttachmentOutput) ToGatewayVpnAttachmentOutputWithContext added in v3.28.0 

func (o GatewayVpnAttachmentOutput) ToGatewayVpnAttachmentOutputWithContext(ctx context.Context) GatewayVpnAttachmentOutput

func (GatewayVpnAttachmentOutput) ToOutput added in v3.43.1 

func (o GatewayVpnAttachmentOutput) ToOutput(ctx context.Context) pulumix.Output[*GatewayVpnAttachment]

func (GatewayVpnAttachmentOutput) VpnAttachmentName added in v3.28.0 

func (o GatewayVpnAttachmentOutput) VpnAttachmentName() pulumi.StringPtrOutput

The name of the vpn attachment.

type GatewayVpnAttachmentState added in v3.28.0 

type GatewayVpnAttachmentState struct {
	// Bgp configuration information. See `bgpConfig` below.
	BgpConfig GatewayVpnAttachmentBgpConfigPtrInput
	// The ID of the customer gateway. From version 1.196.0, `customerGatewayId` can be modified.
	CustomerGatewayId pulumi.StringPtrInput
	// Indicates whether IPsec-VPN negotiations are initiated immediately. Valid values.
	EffectImmediately pulumi.BoolPtrInput
	// Whether to enable the DPD (peer survival detection) function.
	EnableDpd pulumi.BoolPtrInput
	// Allow NAT penetration.
	EnableNatTraversal pulumi.BoolPtrInput
	// Health check configuration information. See `healthCheckConfig` below.
	HealthCheckConfig GatewayVpnAttachmentHealthCheckConfigPtrInput
	// Configuration negotiated in the second stage. See `ikeConfig` below.
	IkeConfig GatewayVpnAttachmentIkeConfigPtrInput
	// The VPN gateway IP.
	InternetIp pulumi.StringPtrInput
	// Configuration negotiated in the second stage. See `ipsecConfig` below.
	IpsecConfig GatewayVpnAttachmentIpsecConfigPtrInput
	// The CIDR block of the virtual private cloud (VPC).
	LocalSubnet pulumi.StringPtrInput
	// The network type of the IPsec connection. Valid values: `public`, `private`.
	NetworkType pulumi.StringPtrInput
	// The CIDR block of the on-premises data center.
	RemoteSubnet pulumi.StringPtrInput
	// The status of the resource.
	Status pulumi.StringPtrInput
	// The name of the vpn attachment.
	VpnAttachmentName pulumi.StringPtrInput
}

func (GatewayVpnAttachmentState) ElementType added in v3.28.0 

func (GatewayVpnAttachmentState) ElementType() reflect.Type

type GetConnectionsArgs 

type GetConnectionsArgs struct {
	// Use the VPN customer gateway ID as the search key.
	CustomerGatewayId *string `pulumi:"customerGatewayId"`
	// IDs of the VPN connections.
	Ids []string `pulumi:"ids"`
	// A regex string of VPN connection name.
	NameRegex *string `pulumi:"nameRegex"`
	// Save the result to the file.
	OutputFile *string `pulumi:"outputFile"`
	// Use the VPN gateway ID as the search key.
	VpnGatewayId *string `pulumi:"vpnGatewayId"`
}

A collection of arguments for invoking getConnections.

type GetConnectionsConnection 

type GetConnectionsConnection struct {
	CreateTime string `pulumi:"createTime"`
	// Use the VPN customer gateway ID as the search key.
	CustomerGatewayId string `pulumi:"customerGatewayId"`
	EffectImmediately bool   `pulumi:"effectImmediately"`
	// Specifies whether to enable the dead peer detection (DPD) feature.
	EnableDpd bool `pulumi:"enableDpd"`
	// Specifies whether to enable NAT traversal.
	EnableNatTraversal bool `pulumi:"enableNatTraversal"`
	// ID of the VPN connection.
	Id string `pulumi:"id"`
	// The configurations of phase-one negotiation.
	IkeConfigs []GetConnectionsConnectionIkeConfig `pulumi:"ikeConfigs"`
	// The configurations of phase-two negotiation.
	IpsecConfigs []GetConnectionsConnectionIpsecConfig `pulumi:"ipsecConfigs"`
	// The local subnet of the VPN connection.
	LocalSubnet string `pulumi:"localSubnet"`
	// The name of the VPN connection.
	Name string `pulumi:"name"`
	// The remote subnet of the VPN connection.
	RemoteSubnet string `pulumi:"remoteSubnet"`
	// The negotiation status of the BGP routing protocol. Valid values: `success`, `false`.
	Status          string                                   `pulumi:"status"`
	VcoHealthChecks []GetConnectionsConnectionVcoHealthCheck `pulumi:"vcoHealthChecks"`
	// The configuration information for BGP.
	VpnBgpConfigs []GetConnectionsConnectionVpnBgpConfig `pulumi:"vpnBgpConfigs"`
	// Use the VPN gateway ID as the search key.
	VpnGatewayId string `pulumi:"vpnGatewayId"`
}

type GetConnectionsConnectionArgs 

type GetConnectionsConnectionArgs struct {
	CreateTime pulumi.StringInput `pulumi:"createTime"`
	// Use the VPN customer gateway ID as the search key.
	CustomerGatewayId pulumi.StringInput `pulumi:"customerGatewayId"`
	EffectImmediately pulumi.BoolInput   `pulumi:"effectImmediately"`
	// Specifies whether to enable the dead peer detection (DPD) feature.
	EnableDpd pulumi.BoolInput `pulumi:"enableDpd"`
	// Specifies whether to enable NAT traversal.
	EnableNatTraversal pulumi.BoolInput `pulumi:"enableNatTraversal"`
	// ID of the VPN connection.
	Id pulumi.StringInput `pulumi:"id"`
	// The configurations of phase-one negotiation.
	IkeConfigs GetConnectionsConnectionIkeConfigArrayInput `pulumi:"ikeConfigs"`
	// The configurations of phase-two negotiation.
	IpsecConfigs GetConnectionsConnectionIpsecConfigArrayInput `pulumi:"ipsecConfigs"`
	// The local subnet of the VPN connection.
	LocalSubnet pulumi.StringInput `pulumi:"localSubnet"`
	// The name of the VPN connection.
	Name pulumi.StringInput `pulumi:"name"`
	// The remote subnet of the VPN connection.
	RemoteSubnet pulumi.StringInput `pulumi:"remoteSubnet"`
	// The negotiation status of the BGP routing protocol. Valid values: `success`, `false`.
	Status          pulumi.StringInput                               `pulumi:"status"`
	VcoHealthChecks GetConnectionsConnectionVcoHealthCheckArrayInput `pulumi:"vcoHealthChecks"`
	// The configuration information for BGP.
	VpnBgpConfigs GetConnectionsConnectionVpnBgpConfigArrayInput `pulumi:"vpnBgpConfigs"`
	// Use the VPN gateway ID as the search key.
	VpnGatewayId pulumi.StringInput `pulumi:"vpnGatewayId"`
}

func (GetConnectionsConnectionArgs) ElementType 

func (GetConnectionsConnectionArgs) ElementType() reflect.Type

func (GetConnectionsConnectionArgs) ToGetConnectionsConnectionOutput 

func (i GetConnectionsConnectionArgs) ToGetConnectionsConnectionOutput() GetConnectionsConnectionOutput

func (GetConnectionsConnectionArgs) ToGetConnectionsConnectionOutputWithContext 

func (i GetConnectionsConnectionArgs) ToGetConnectionsConnectionOutputWithContext(ctx context.Context) GetConnectionsConnectionOutput

func (GetConnectionsConnectionArgs) ToOutput added in v3.43.1 

func (i GetConnectionsConnectionArgs) ToOutput(ctx context.Context) pulumix.Output[GetConnectionsConnection]

type GetConnectionsConnectionArray 

type GetConnectionsConnectionArray []GetConnectionsConnectionInput

func (GetConnectionsConnectionArray) ElementType 

func (GetConnectionsConnectionArray) ElementType() reflect.Type

func (GetConnectionsConnectionArray) ToGetConnectionsConnectionArrayOutput 

func (i GetConnectionsConnectionArray) ToGetConnectionsConnectionArrayOutput() GetConnectionsConnectionArrayOutput

func (GetConnectionsConnectionArray) ToGetConnectionsConnectionArrayOutputWithContext 

func (i GetConnectionsConnectionArray) ToGetConnectionsConnectionArrayOutputWithContext(ctx context.Context) GetConnectionsConnectionArrayOutput

func (GetConnectionsConnectionArray) ToOutput added in v3.43.1 

func (i GetConnectionsConnectionArray) ToOutput(ctx context.Context) pulumix.Output[[]GetConnectionsConnection]

type GetConnectionsConnectionArrayInput 

type GetConnectionsConnectionArrayInput interface {
	pulumi.Input

	ToGetConnectionsConnectionArrayOutput() GetConnectionsConnectionArrayOutput
	ToGetConnectionsConnectionArrayOutputWithContext(context.Context) GetConnectionsConnectionArrayOutput
}

GetConnectionsConnectionArrayInput is an input type that accepts GetConnectionsConnectionArray and GetConnectionsConnectionArrayOutput values. You can construct a concrete instance of `GetConnectionsConnectionArrayInput` via: 

GetConnectionsConnectionArray{ GetConnectionsConnectionArgs{...} }

type GetConnectionsConnectionArrayOutput 

type GetConnectionsConnectionArrayOutput struct{ *pulumi.OutputState }

func (GetConnectionsConnectionArrayOutput) ElementType 

func (GetConnectionsConnectionArrayOutput) ElementType() reflect.Type

func (GetConnectionsConnectionArrayOutput) Index 

func (o GetConnectionsConnectionArrayOutput) Index(i pulumi.IntInput) GetConnectionsConnectionOutput

func (GetConnectionsConnectionArrayOutput) ToGetConnectionsConnectionArrayOutput 

func (o GetConnectionsConnectionArrayOutput) ToGetConnectionsConnectionArrayOutput() GetConnectionsConnectionArrayOutput

func (GetConnectionsConnectionArrayOutput) ToGetConnectionsConnectionArrayOutputWithContext 

func (o GetConnectionsConnectionArrayOutput) ToGetConnectionsConnectionArrayOutputWithContext(ctx context.Context) GetConnectionsConnectionArrayOutput

func (GetConnectionsConnectionArrayOutput) ToOutput added in v3.43.1 

func (o GetConnectionsConnectionArrayOutput) ToOutput(ctx context.Context) pulumix.Output[[]GetConnectionsConnection]

type GetConnectionsConnectionIkeConfig 

type GetConnectionsConnectionIkeConfig struct {
	// The authentication algorithm of phase-one negotiation.
	IkeAuthAlg *string `pulumi:"ikeAuthAlg"`
	// The encryption algorithm of phase-one negotiation.
	IkeEncAlg *string `pulumi:"ikeEncAlg"`
	// The SA lifecycle as the result of phase-one negotiation.
	IkeLifetime *int `pulumi:"ikeLifetime"`
	// The identification of the VPN gateway.
	IkeLocalId *string `pulumi:"ikeLocalId"`
	// The negotiation mode of IKE phase-one.
	IkeMode *string `pulumi:"ikeMode"`
	// The Diffie-Hellman key exchange algorithm used by phase-one negotiation.
	IkePfs *string `pulumi:"ikePfs"`
	// The identification of the customer gateway.
	IkeRemoteId *string `pulumi:"ikeRemoteId"`
	// The version of the IKE protocol.
	IkeVersion *string `pulumi:"ikeVersion"`
	// Used for authentication between the IPsec VPN gateway and the customer gateway.
	Psk *string `pulumi:"psk"`
}

type GetConnectionsConnectionIkeConfigArgs 

type GetConnectionsConnectionIkeConfigArgs struct {
	// The authentication algorithm of phase-one negotiation.
	IkeAuthAlg pulumi.StringPtrInput `pulumi:"ikeAuthAlg"`
	// The encryption algorithm of phase-one negotiation.
	IkeEncAlg pulumi.StringPtrInput `pulumi:"ikeEncAlg"`
	// The SA lifecycle as the result of phase-one negotiation.
	IkeLifetime pulumi.IntPtrInput `pulumi:"ikeLifetime"`
	// The identification of the VPN gateway.
	IkeLocalId pulumi.StringPtrInput `pulumi:"ikeLocalId"`
	// The negotiation mode of IKE phase-one.
	IkeMode pulumi.StringPtrInput `pulumi:"ikeMode"`
	// The Diffie-Hellman key exchange algorithm used by phase-one negotiation.
	IkePfs pulumi.StringPtrInput `pulumi:"ikePfs"`
	// The identification of the customer gateway.
	IkeRemoteId pulumi.StringPtrInput `pulumi:"ikeRemoteId"`
	// The version of the IKE protocol.
	IkeVersion pulumi.StringPtrInput `pulumi:"ikeVersion"`
	// Used for authentication between the IPsec VPN gateway and the customer gateway.
	Psk pulumi.StringPtrInput `pulumi:"psk"`
}

func (GetConnectionsConnectionIkeConfigArgs) ElementType 

func (GetConnectionsConnectionIkeConfigArgs) ElementType() reflect.Type

func (GetConnectionsConnectionIkeConfigArgs) ToGetConnectionsConnectionIkeConfigOutput 

func (i GetConnectionsConnectionIkeConfigArgs) ToGetConnectionsConnectionIkeConfigOutput() GetConnectionsConnectionIkeConfigOutput

func (GetConnectionsConnectionIkeConfigArgs) ToGetConnectionsConnectionIkeConfigOutputWithContext 

func (i GetConnectionsConnectionIkeConfigArgs) ToGetConnectionsConnectionIkeConfigOutputWithContext(ctx context.Context) GetConnectionsConnectionIkeConfigOutput

func (GetConnectionsConnectionIkeConfigArgs) ToOutput added in v3.43.1 

func (i GetConnectionsConnectionIkeConfigArgs) ToOutput(ctx context.Context) pulumix.Output[GetConnectionsConnectionIkeConfig]

type GetConnectionsConnectionIkeConfigArray 

type GetConnectionsConnectionIkeConfigArray []GetConnectionsConnectionIkeConfigInput

func (GetConnectionsConnectionIkeConfigArray) ElementType 

func (GetConnectionsConnectionIkeConfigArray) ElementType() reflect.Type

func (GetConnectionsConnectionIkeConfigArray) ToGetConnectionsConnectionIkeConfigArrayOutput 

func (i GetConnectionsConnectionIkeConfigArray) ToGetConnectionsConnectionIkeConfigArrayOutput() GetConnectionsConnectionIkeConfigArrayOutput

func (GetConnectionsConnectionIkeConfigArray) ToGetConnectionsConnectionIkeConfigArrayOutputWithContext 

func (i GetConnectionsConnectionIkeConfigArray) ToGetConnectionsConnectionIkeConfigArrayOutputWithContext(ctx context.Context) GetConnectionsConnectionIkeConfigArrayOutput

func (GetConnectionsConnectionIkeConfigArray) ToOutput added in v3.43.1 

func (i GetConnectionsConnectionIkeConfigArray) ToOutput(ctx context.Context) pulumix.Output[[]GetConnectionsConnectionIkeConfig]

type GetConnectionsConnectionIkeConfigArrayInput 

type GetConnectionsConnectionIkeConfigArrayInput interface {
	pulumi.Input

	ToGetConnectionsConnectionIkeConfigArrayOutput() GetConnectionsConnectionIkeConfigArrayOutput
	ToGetConnectionsConnectionIkeConfigArrayOutputWithContext(context.Context) GetConnectionsConnectionIkeConfigArrayOutput
}

GetConnectionsConnectionIkeConfigArrayInput is an input type that accepts GetConnectionsConnectionIkeConfigArray and GetConnectionsConnectionIkeConfigArrayOutput values. You can construct a concrete instance of `GetConnectionsConnectionIkeConfigArrayInput` via: 

GetConnectionsConnectionIkeConfigArray{ GetConnectionsConnectionIkeConfigArgs{...} }

type GetConnectionsConnectionIkeConfigArrayOutput 

type GetConnectionsConnectionIkeConfigArrayOutput struct{ *pulumi.OutputState }

func (GetConnectionsConnectionIkeConfigArrayOutput) ElementType 

func (GetConnectionsConnectionIkeConfigArrayOutput) ElementType() reflect.Type

func (GetConnectionsConnectionIkeConfigArrayOutput) Index 

func (o GetConnectionsConnectionIkeConfigArrayOutput) Index(i pulumi.IntInput) GetConnectionsConnectionIkeConfigOutput

func (GetConnectionsConnectionIkeConfigArrayOutput) ToGetConnectionsConnectionIkeConfigArrayOutput 

func (o GetConnectionsConnectionIkeConfigArrayOutput) ToGetConnectionsConnectionIkeConfigArrayOutput() GetConnectionsConnectionIkeConfigArrayOutput

func (GetConnectionsConnectionIkeConfigArrayOutput) ToGetConnectionsConnectionIkeConfigArrayOutputWithContext 

func (o GetConnectionsConnectionIkeConfigArrayOutput) ToGetConnectionsConnectionIkeConfigArrayOutputWithContext(ctx context.Context) GetConnectionsConnectionIkeConfigArrayOutput

func (GetConnectionsConnectionIkeConfigArrayOutput) ToOutput added in v3.43.1 

func (o GetConnectionsConnectionIkeConfigArrayOutput) ToOutput(ctx context.Context) pulumix.Output[[]GetConnectionsConnectionIkeConfig]

type GetConnectionsConnectionIkeConfigInput 

type GetConnectionsConnectionIkeConfigInput interface {
	pulumi.Input

	ToGetConnectionsConnectionIkeConfigOutput() GetConnectionsConnectionIkeConfigOutput
	ToGetConnectionsConnectionIkeConfigOutputWithContext(context.Context) GetConnectionsConnectionIkeConfigOutput
}

GetConnectionsConnectionIkeConfigInput is an input type that accepts GetConnectionsConnectionIkeConfigArgs and GetConnectionsConnectionIkeConfigOutput values. You can construct a concrete instance of `GetConnectionsConnectionIkeConfigInput` via: 

GetConnectionsConnectionIkeConfigArgs{...}

type GetConnectionsConnectionIkeConfigOutput 

type GetConnectionsConnectionIkeConfigOutput struct{ *pulumi.OutputState }

func (GetConnectionsConnectionIkeConfigOutput) ElementType 

func (GetConnectionsConnectionIkeConfigOutput) ElementType() reflect.Type

func (GetConnectionsConnectionIkeConfigOutput) IkeAuthAlg 

func (o GetConnectionsConnectionIkeConfigOutput) IkeAuthAlg() pulumi.StringPtrOutput

The authentication algorithm of phase-one negotiation.

func (GetConnectionsConnectionIkeConfigOutput) IkeEncAlg 

func (o GetConnectionsConnectionIkeConfigOutput) IkeEncAlg() pulumi.StringPtrOutput

The encryption algorithm of phase-one negotiation.

func (GetConnectionsConnectionIkeConfigOutput) IkeLifetime 

func (o GetConnectionsConnectionIkeConfigOutput) IkeLifetime() pulumi.IntPtrOutput

The SA lifecycle as the result of phase-one negotiation.

func (GetConnectionsConnectionIkeConfigOutput) IkeLocalId 

func (o GetConnectionsConnectionIkeConfigOutput) IkeLocalId() pulumi.StringPtrOutput

The identification of the VPN gateway.

func (GetConnectionsConnectionIkeConfigOutput) IkeMode 

func (o GetConnectionsConnectionIkeConfigOutput) IkeMode() pulumi.StringPtrOutput

The negotiation mode of IKE phase-one.

func (GetConnectionsConnectionIkeConfigOutput) IkePfs 

func (o GetConnectionsConnectionIkeConfigOutput) IkePfs() pulumi.StringPtrOutput

The Diffie-Hellman key exchange algorithm used by phase-one negotiation.

func (GetConnectionsConnectionIkeConfigOutput) IkeRemoteId 

func (o GetConnectionsConnectionIkeConfigOutput) IkeRemoteId() pulumi.StringPtrOutput

The identification of the customer gateway.

func (GetConnectionsConnectionIkeConfigOutput) IkeVersion 

func (o GetConnectionsConnectionIkeConfigOutput) IkeVersion() pulumi.StringPtrOutput

The version of the IKE protocol.

func (GetConnectionsConnectionIkeConfigOutput) Psk 

func (o GetConnectionsConnectionIkeConfigOutput) Psk() pulumi.StringPtrOutput

Used for authentication between the IPsec VPN gateway and the customer gateway.

func (GetConnectionsConnectionIkeConfigOutput) ToGetConnectionsConnectionIkeConfigOutput 

func (o GetConnectionsConnectionIkeConfigOutput) ToGetConnectionsConnectionIkeConfigOutput() GetConnectionsConnectionIkeConfigOutput

func (GetConnectionsConnectionIkeConfigOutput) ToGetConnectionsConnectionIkeConfigOutputWithContext 

func (o GetConnectionsConnectionIkeConfigOutput) ToGetConnectionsConnectionIkeConfigOutputWithContext(ctx context.Context) GetConnectionsConnectionIkeConfigOutput

func (GetConnectionsConnectionIkeConfigOutput) ToOutput added in v3.43.1 

func (o GetConnectionsConnectionIkeConfigOutput) ToOutput(ctx context.Context) pulumix.Output[GetConnectionsConnectionIkeConfig]

type GetConnectionsConnectionInput 

type GetConnectionsConnectionInput interface {
	pulumi.Input

	ToGetConnectionsConnectionOutput() GetConnectionsConnectionOutput
	ToGetConnectionsConnectionOutputWithContext(context.Context) GetConnectionsConnectionOutput
}

GetConnectionsConnectionInput is an input type that accepts GetConnectionsConnectionArgs and GetConnectionsConnectionOutput values. You can construct a concrete instance of `GetConnectionsConnectionInput` via: 

GetConnectionsConnectionArgs{...}

type GetConnectionsConnectionIpsecConfig 

type GetConnectionsConnectionIpsecConfig struct {
	// The authentication algorithm of phase-two negotiation.
	IpsecAuthAlg *string `pulumi:"ipsecAuthAlg"`
	// The encryption algorithm of phase-two negotiation.
	IpsecEncAlg *string `pulumi:"ipsecEncAlg"`
	// The SA lifecycle as the result of phase-two negotiation.
	IpsecLifetime *int `pulumi:"ipsecLifetime"`
	// The Diffie-Hellman key exchange algorithm used by phase-two negotiation.
	IpsecPfs *string `pulumi:"ipsecPfs"`
}

type GetConnectionsConnectionIpsecConfigArgs 

type GetConnectionsConnectionIpsecConfigArgs struct {
	// The authentication algorithm of phase-two negotiation.
	IpsecAuthAlg pulumi.StringPtrInput `pulumi:"ipsecAuthAlg"`
	// The encryption algorithm of phase-two negotiation.
	IpsecEncAlg pulumi.StringPtrInput `pulumi:"ipsecEncAlg"`
	// The SA lifecycle as the result of phase-two negotiation.
	IpsecLifetime pulumi.IntPtrInput `pulumi:"ipsecLifetime"`
	// The Diffie-Hellman key exchange algorithm used by phase-two negotiation.
	IpsecPfs pulumi.StringPtrInput `pulumi:"ipsecPfs"`
}

func (GetConnectionsConnectionIpsecConfigArgs) ElementType 

func (GetConnectionsConnectionIpsecConfigArgs) ElementType() reflect.Type

func (GetConnectionsConnectionIpsecConfigArgs) ToGetConnectionsConnectionIpsecConfigOutput 

func (i GetConnectionsConnectionIpsecConfigArgs) ToGetConnectionsConnectionIpsecConfigOutput() GetConnectionsConnectionIpsecConfigOutput

func (GetConnectionsConnectionIpsecConfigArgs) ToGetConnectionsConnectionIpsecConfigOutputWithContext 

func (i GetConnectionsConnectionIpsecConfigArgs) ToGetConnectionsConnectionIpsecConfigOutputWithContext(ctx context.Context) GetConnectionsConnectionIpsecConfigOutput

func (GetConnectionsConnectionIpsecConfigArgs) ToOutput added in v3.43.1 

func (i GetConnectionsConnectionIpsecConfigArgs) ToOutput(ctx context.Context) pulumix.Output[GetConnectionsConnectionIpsecConfig]

type GetConnectionsConnectionIpsecConfigArray 

type GetConnectionsConnectionIpsecConfigArray []GetConnectionsConnectionIpsecConfigInput

func (GetConnectionsConnectionIpsecConfigArray) ElementType 

func (GetConnectionsConnectionIpsecConfigArray) ElementType() reflect.Type

func (GetConnectionsConnectionIpsecConfigArray) ToGetConnectionsConnectionIpsecConfigArrayOutput 

func (i GetConnectionsConnectionIpsecConfigArray) ToGetConnectionsConnectionIpsecConfigArrayOutput() GetConnectionsConnectionIpsecConfigArrayOutput

func (GetConnectionsConnectionIpsecConfigArray) ToGetConnectionsConnectionIpsecConfigArrayOutputWithContext 

func (i GetConnectionsConnectionIpsecConfigArray) ToGetConnectionsConnectionIpsecConfigArrayOutputWithContext(ctx context.Context) GetConnectionsConnectionIpsecConfigArrayOutput

func (GetConnectionsConnectionIpsecConfigArray) ToOutput added in v3.43.1 

func (i GetConnectionsConnectionIpsecConfigArray) ToOutput(ctx context.Context) pulumix.Output[[]GetConnectionsConnectionIpsecConfig]

type GetConnectionsConnectionIpsecConfigArrayInput 

type GetConnectionsConnectionIpsecConfigArrayInput interface {
	pulumi.Input

	ToGetConnectionsConnectionIpsecConfigArrayOutput() GetConnectionsConnectionIpsecConfigArrayOutput
	ToGetConnectionsConnectionIpsecConfigArrayOutputWithContext(context.Context) GetConnectionsConnectionIpsecConfigArrayOutput
}

GetConnectionsConnectionIpsecConfigArrayInput is an input type that accepts GetConnectionsConnectionIpsecConfigArray and GetConnectionsConnectionIpsecConfigArrayOutput values. You can construct a concrete instance of `GetConnectionsConnectionIpsecConfigArrayInput` via: 

GetConnectionsConnectionIpsecConfigArray{ GetConnectionsConnectionIpsecConfigArgs{...} }

type GetConnectionsConnectionIpsecConfigArrayOutput 

type GetConnectionsConnectionIpsecConfigArrayOutput struct{ *pulumi.OutputState }

func (GetConnectionsConnectionIpsecConfigArrayOutput) ElementType 

func (GetConnectionsConnectionIpsecConfigArrayOutput) ElementType() reflect.Type

func (GetConnectionsConnectionIpsecConfigArrayOutput) Index 

func (o GetConnectionsConnectionIpsecConfigArrayOutput) Index(i pulumi.IntInput) GetConnectionsConnectionIpsecConfigOutput

func (GetConnectionsConnectionIpsecConfigArrayOutput) ToGetConnectionsConnectionIpsecConfigArrayOutput 

func (o GetConnectionsConnectionIpsecConfigArrayOutput) ToGetConnectionsConnectionIpsecConfigArrayOutput() GetConnectionsConnectionIpsecConfigArrayOutput

func (GetConnectionsConnectionIpsecConfigArrayOutput) ToGetConnectionsConnectionIpsecConfigArrayOutputWithContext 

func (o GetConnectionsConnectionIpsecConfigArrayOutput) ToGetConnectionsConnectionIpsecConfigArrayOutputWithContext(ctx context.Context) GetConnectionsConnectionIpsecConfigArrayOutput

func (GetConnectionsConnectionIpsecConfigArrayOutput) ToOutput added in v3.43.1 

func (o GetConnectionsConnectionIpsecConfigArrayOutput) ToOutput(ctx context.Context) pulumix.Output[[]GetConnectionsConnectionIpsecConfig]

type GetConnectionsConnectionIpsecConfigInput 

type GetConnectionsConnectionIpsecConfigInput interface {
	pulumi.Input

	ToGetConnectionsConnectionIpsecConfigOutput() GetConnectionsConnectionIpsecConfigOutput
	ToGetConnectionsConnectionIpsecConfigOutputWithContext(context.Context) GetConnectionsConnectionIpsecConfigOutput
}

GetConnectionsConnectionIpsecConfigInput is an input type that accepts GetConnectionsConnectionIpsecConfigArgs and GetConnectionsConnectionIpsecConfigOutput values. You can construct a concrete instance of `GetConnectionsConnectionIpsecConfigInput` via: 

GetConnectionsConnectionIpsecConfigArgs{...}

type GetConnectionsConnectionIpsecConfigOutput 

type GetConnectionsConnectionIpsecConfigOutput struct{ *pulumi.OutputState }

func (GetConnectionsConnectionIpsecConfigOutput) ElementType 

func (GetConnectionsConnectionIpsecConfigOutput) ElementType() reflect.Type

func (GetConnectionsConnectionIpsecConfigOutput) IpsecAuthAlg 

func (o GetConnectionsConnectionIpsecConfigOutput) IpsecAuthAlg() pulumi.StringPtrOutput

The authentication algorithm of phase-two negotiation.

func (GetConnectionsConnectionIpsecConfigOutput) IpsecEncAlg 

func (o GetConnectionsConnectionIpsecConfigOutput) IpsecEncAlg() pulumi.StringPtrOutput

The encryption algorithm of phase-two negotiation.

func (GetConnectionsConnectionIpsecConfigOutput) IpsecLifetime 

func (o GetConnectionsConnectionIpsecConfigOutput) IpsecLifetime() pulumi.IntPtrOutput

The SA lifecycle as the result of phase-two negotiation.

func (GetConnectionsConnectionIpsecConfigOutput) IpsecPfs 

func (o GetConnectionsConnectionIpsecConfigOutput) IpsecPfs() pulumi.StringPtrOutput

The Diffie-Hellman key exchange algorithm used by phase-two negotiation.

func (GetConnectionsConnectionIpsecConfigOutput) ToGetConnectionsConnectionIpsecConfigOutput 

func (o GetConnectionsConnectionIpsecConfigOutput) ToGetConnectionsConnectionIpsecConfigOutput() GetConnectionsConnectionIpsecConfigOutput

func (GetConnectionsConnectionIpsecConfigOutput) ToGetConnectionsConnectionIpsecConfigOutputWithContext 

func (o GetConnectionsConnectionIpsecConfigOutput) ToGetConnectionsConnectionIpsecConfigOutputWithContext(ctx context.Context) GetConnectionsConnectionIpsecConfigOutput

func (GetConnectionsConnectionIpsecConfigOutput) ToOutput added in v3.43.1 

func (o GetConnectionsConnectionIpsecConfigOutput) ToOutput(ctx context.Context) pulumix.Output[GetConnectionsConnectionIpsecConfig]

type GetConnectionsConnectionOutput 

type GetConnectionsConnectionOutput struct{ *pulumi.OutputState }

func (GetConnectionsConnectionOutput) CreateTime 

func (o GetConnectionsConnectionOutput) CreateTime() pulumi.StringOutput

func (GetConnectionsConnectionOutput) CustomerGatewayId 

func (o GetConnectionsConnectionOutput) CustomerGatewayId() pulumi.StringOutput

Use the VPN customer gateway ID as the search key.

func (GetConnectionsConnectionOutput) EffectImmediately 

func (o GetConnectionsConnectionOutput) EffectImmediately() pulumi.BoolOutput

func (GetConnectionsConnectionOutput) ElementType 

func (GetConnectionsConnectionOutput) ElementType() reflect.Type

func (GetConnectionsConnectionOutput) EnableDpd added in v3.35.0 

func (o GetConnectionsConnectionOutput) EnableDpd() pulumi.BoolOutput

Specifies whether to enable the dead peer detection (DPD) feature.

func (GetConnectionsConnectionOutput) EnableNatTraversal added in v3.35.0 

func (o GetConnectionsConnectionOutput) EnableNatTraversal() pulumi.BoolOutput

Specifies whether to enable NAT traversal.

func (GetConnectionsConnectionOutput) Id 

func (o GetConnectionsConnectionOutput) Id() pulumi.StringOutput

ID of the VPN connection.

func (GetConnectionsConnectionOutput) IkeConfigs 

func (o GetConnectionsConnectionOutput) IkeConfigs() GetConnectionsConnectionIkeConfigArrayOutput

The configurations of phase-one negotiation.

func (GetConnectionsConnectionOutput) IpsecConfigs 

func (o GetConnectionsConnectionOutput) IpsecConfigs() GetConnectionsConnectionIpsecConfigArrayOutput

The configurations of phase-two negotiation.

func (GetConnectionsConnectionOutput) LocalSubnet 

func (o GetConnectionsConnectionOutput) LocalSubnet() pulumi.StringOutput

The local subnet of the VPN connection.

func (GetConnectionsConnectionOutput) Name 

func (o GetConnectionsConnectionOutput) Name() pulumi.StringOutput

The name of the VPN connection.

func (GetConnectionsConnectionOutput) RemoteSubnet 

func (o GetConnectionsConnectionOutput) RemoteSubnet() pulumi.StringOutput

The remote subnet of the VPN connection.

func (GetConnectionsConnectionOutput) Status 

func (o GetConnectionsConnectionOutput) Status() pulumi.StringOutput

The negotiation status of the BGP routing protocol. Valid values: `success`, `false`.

func (GetConnectionsConnectionOutput) ToGetConnectionsConnectionOutput 

func (o GetConnectionsConnectionOutput) ToGetConnectionsConnectionOutput() GetConnectionsConnectionOutput

func (GetConnectionsConnectionOutput) ToGetConnectionsConnectionOutputWithContext 

func (o GetConnectionsConnectionOutput) ToGetConnectionsConnectionOutputWithContext(ctx context.Context) GetConnectionsConnectionOutput

func (GetConnectionsConnectionOutput) ToOutput added in v3.43.1 

func (o GetConnectionsConnectionOutput) ToOutput(ctx context.Context) pulumix.Output[GetConnectionsConnection]

func (GetConnectionsConnectionOutput) VcoHealthChecks added in v3.29.0 

func (o GetConnectionsConnectionOutput) VcoHealthChecks() GetConnectionsConnectionVcoHealthCheckArrayOutput

func (GetConnectionsConnectionOutput) VpnBgpConfigs added in v3.29.0 

func (o GetConnectionsConnectionOutput) VpnBgpConfigs() GetConnectionsConnectionVpnBgpConfigArrayOutput

The configuration information for BGP.

func (GetConnectionsConnectionOutput) VpnGatewayId 

func (o GetConnectionsConnectionOutput) VpnGatewayId() pulumi.StringOutput

Use the VPN gateway ID as the search key.

type GetConnectionsConnectionVcoHealthCheck added in v3.29.0 

type GetConnectionsConnectionVcoHealthCheck struct {
	// The destination ip address.
	Dip *string `pulumi:"dip"`
	// The health check on status. Valid values: `true`, `false`.
	Enable *string `pulumi:"enable"`
	// The time interval between health checks.
	Interval *int `pulumi:"interval"`
	// The number of retries for health checks issued.
	Retry *int `pulumi:"retry"`
	// The source ip address.
	Sip *string `pulumi:"sip"`
	// The negotiation status of the BGP routing protocol. Valid values: `success`, `false`.
	Status *string `pulumi:"status"`
}

type GetConnectionsConnectionVcoHealthCheckArgs added in v3.29.0 

type GetConnectionsConnectionVcoHealthCheckArgs struct {
	// The destination ip address.
	Dip pulumi.StringPtrInput `pulumi:"dip"`
	// The health check on status. Valid values: `true`, `false`.
	Enable pulumi.StringPtrInput `pulumi:"enable"`
	// The time interval between health checks.
	Interval pulumi.IntPtrInput `pulumi:"interval"`
	// The number of retries for health checks issued.
	Retry pulumi.IntPtrInput `pulumi:"retry"`
	// The source ip address.
	Sip pulumi.StringPtrInput `pulumi:"sip"`
	// The negotiation status of the BGP routing protocol. Valid values: `success`, `false`.
	Status pulumi.StringPtrInput `pulumi:"status"`
}

func (GetConnectionsConnectionVcoHealthCheckArgs) ElementType added in v3.29.0 

func (GetConnectionsConnectionVcoHealthCheckArgs) ElementType() reflect.Type

func (GetConnectionsConnectionVcoHealthCheckArgs) ToGetConnectionsConnectionVcoHealthCheckOutput added in v3.29.0 

func (i GetConnectionsConnectionVcoHealthCheckArgs) ToGetConnectionsConnectionVcoHealthCheckOutput() GetConnectionsConnectionVcoHealthCheckOutput

func (GetConnectionsConnectionVcoHealthCheckArgs) ToGetConnectionsConnectionVcoHealthCheckOutputWithContext added in v3.29.0 

func (i GetConnectionsConnectionVcoHealthCheckArgs) ToGetConnectionsConnectionVcoHealthCheckOutputWithContext(ctx context.Context) GetConnectionsConnectionVcoHealthCheckOutput

func (GetConnectionsConnectionVcoHealthCheckArgs) ToOutput added in v3.43.1 

func (i GetConnectionsConnectionVcoHealthCheckArgs) ToOutput(ctx context.Context) pulumix.Output[GetConnectionsConnectionVcoHealthCheck]

type GetConnectionsConnectionVcoHealthCheckArray added in v3.29.0 

type GetConnectionsConnectionVcoHealthCheckArray []GetConnectionsConnectionVcoHealthCheckInput

func (GetConnectionsConnectionVcoHealthCheckArray) ElementType added in v3.29.0 

func (GetConnectionsConnectionVcoHealthCheckArray) ElementType() reflect.Type

func (GetConnectionsConnectionVcoHealthCheckArray) ToGetConnectionsConnectionVcoHealthCheckArrayOutput added in v3.29.0 

func (i GetConnectionsConnectionVcoHealthCheckArray) ToGetConnectionsConnectionVcoHealthCheckArrayOutput() GetConnectionsConnectionVcoHealthCheckArrayOutput

func (GetConnectionsConnectionVcoHealthCheckArray) ToGetConnectionsConnectionVcoHealthCheckArrayOutputWithContext added in v3.29.0 

func (i GetConnectionsConnectionVcoHealthCheckArray) ToGetConnectionsConnectionVcoHealthCheckArrayOutputWithContext(ctx context.Context) GetConnectionsConnectionVcoHealthCheckArrayOutput

func (GetConnectionsConnectionVcoHealthCheckArray) ToOutput added in v3.43.1 

func (i GetConnectionsConnectionVcoHealthCheckArray) ToOutput(ctx context.Context) pulumix.Output[[]GetConnectionsConnectionVcoHealthCheck]

type GetConnectionsConnectionVcoHealthCheckArrayInput added in v3.29.0 

type GetConnectionsConnectionVcoHealthCheckArrayInput interface {
	pulumi.Input

	ToGetConnectionsConnectionVcoHealthCheckArrayOutput() GetConnectionsConnectionVcoHealthCheckArrayOutput
	ToGetConnectionsConnectionVcoHealthCheckArrayOutputWithContext(context.Context) GetConnectionsConnectionVcoHealthCheckArrayOutput
}

GetConnectionsConnectionVcoHealthCheckArrayInput is an input type that accepts GetConnectionsConnectionVcoHealthCheckArray and GetConnectionsConnectionVcoHealthCheckArrayOutput values. You can construct a concrete instance of `GetConnectionsConnectionVcoHealthCheckArrayInput` via: 

GetConnectionsConnectionVcoHealthCheckArray{ GetConnectionsConnectionVcoHealthCheckArgs{...} }

type GetConnectionsConnectionVcoHealthCheckArrayOutput added in v3.29.0 

type GetConnectionsConnectionVcoHealthCheckArrayOutput struct{ *pulumi.OutputState }

func (GetConnectionsConnectionVcoHealthCheckArrayOutput) ElementType added in v3.29.0 

func (GetConnectionsConnectionVcoHealthCheckArrayOutput) ElementType() reflect.Type

func (GetConnectionsConnectionVcoHealthCheckArrayOutput) Index added in v3.29.0 

func (o GetConnectionsConnectionVcoHealthCheckArrayOutput) Index(i pulumi.IntInput) GetConnectionsConnectionVcoHealthCheckOutput

func (GetConnectionsConnectionVcoHealthCheckArrayOutput) ToGetConnectionsConnectionVcoHealthCheckArrayOutput added in v3.29.0 

func (o GetConnectionsConnectionVcoHealthCheckArrayOutput) ToGetConnectionsConnectionVcoHealthCheckArrayOutput() GetConnectionsConnectionVcoHealthCheckArrayOutput

func (GetConnectionsConnectionVcoHealthCheckArrayOutput) ToGetConnectionsConnectionVcoHealthCheckArrayOutputWithContext added in v3.29.0 

func (o GetConnectionsConnectionVcoHealthCheckArrayOutput) ToGetConnectionsConnectionVcoHealthCheckArrayOutputWithContext(ctx context.Context) GetConnectionsConnectionVcoHealthCheckArrayOutput

func (GetConnectionsConnectionVcoHealthCheckArrayOutput) ToOutput added in v3.43.1 

func (o GetConnectionsConnectionVcoHealthCheckArrayOutput) ToOutput(ctx context.Context) pulumix.Output[[]GetConnectionsConnectionVcoHealthCheck]

type GetConnectionsConnectionVcoHealthCheckInput added in v3.29.0 

type GetConnectionsConnectionVcoHealthCheckInput interface {
	pulumi.Input

	ToGetConnectionsConnectionVcoHealthCheckOutput() GetConnectionsConnectionVcoHealthCheckOutput
	ToGetConnectionsConnectionVcoHealthCheckOutputWithContext(context.Context) GetConnectionsConnectionVcoHealthCheckOutput
}

GetConnectionsConnectionVcoHealthCheckInput is an input type that accepts GetConnectionsConnectionVcoHealthCheckArgs and GetConnectionsConnectionVcoHealthCheckOutput values. You can construct a concrete instance of `GetConnectionsConnectionVcoHealthCheckInput` via: 

GetConnectionsConnectionVcoHealthCheckArgs{...}

type GetConnectionsConnectionVcoHealthCheckOutput added in v3.29.0 

type GetConnectionsConnectionVcoHealthCheckOutput struct{ *pulumi.OutputState }

func (GetConnectionsConnectionVcoHealthCheckOutput) Dip added in v3.29.0 

func (o GetConnectionsConnectionVcoHealthCheckOutput) Dip() pulumi.StringPtrOutput

The destination ip address.

func (GetConnectionsConnectionVcoHealthCheckOutput) ElementType added in v3.29.0 

func (GetConnectionsConnectionVcoHealthCheckOutput) ElementType() reflect.Type

func (GetConnectionsConnectionVcoHealthCheckOutput) Enable added in v3.29.0 

func (o GetConnectionsConnectionVcoHealthCheckOutput) Enable() pulumi.StringPtrOutput

The health check on status. Valid values: `true`, `false`.

func (GetConnectionsConnectionVcoHealthCheckOutput) Interval added in v3.29.0 

func (o GetConnectionsConnectionVcoHealthCheckOutput) Interval() pulumi.IntPtrOutput

The time interval between health checks.

func (GetConnectionsConnectionVcoHealthCheckOutput) Retry added in v3.29.0 

func (o GetConnectionsConnectionVcoHealthCheckOutput) Retry() pulumi.IntPtrOutput

The number of retries for health checks issued.

func (GetConnectionsConnectionVcoHealthCheckOutput) Sip added in v3.29.0 

func (o GetConnectionsConnectionVcoHealthCheckOutput) Sip() pulumi.StringPtrOutput

The source ip address.

func (GetConnectionsConnectionVcoHealthCheckOutput) Status added in v3.29.0 

func (o GetConnectionsConnectionVcoHealthCheckOutput) Status() pulumi.StringPtrOutput

The negotiation status of the BGP routing protocol. Valid values: `success`, `false`.

func (GetConnectionsConnectionVcoHealthCheckOutput) ToGetConnectionsConnectionVcoHealthCheckOutput added in v3.29.0 

func (o GetConnectionsConnectionVcoHealthCheckOutput) ToGetConnectionsConnectionVcoHealthCheckOutput() GetConnectionsConnectionVcoHealthCheckOutput

func (GetConnectionsConnectionVcoHealthCheckOutput) ToGetConnectionsConnectionVcoHealthCheckOutputWithContext added in v3.29.0 

func (o GetConnectionsConnectionVcoHealthCheckOutput) ToGetConnectionsConnectionVcoHealthCheckOutputWithContext(ctx context.Context) GetConnectionsConnectionVcoHealthCheckOutput

func (GetConnectionsConnectionVcoHealthCheckOutput) ToOutput added in v3.43.1 

func (o GetConnectionsConnectionVcoHealthCheckOutput) ToOutput(ctx context.Context) pulumix.Output[GetConnectionsConnectionVcoHealthCheck]

type GetConnectionsConnectionVpnBgpConfig added in v3.29.0 

type GetConnectionsConnectionVpnBgpConfig struct {
	// The authentication keys for BGP routing protocols.
	AuthKey *string `pulumi:"authKey"`
	// The ali cloud side autonomous system.
	LocalAsn *int `pulumi:"localAsn"`
	// The ali cloud side BGP address.
	LocalBgpIp *string `pulumi:"localBgpIp"`
	// The counterpart autonomous system number.
	PeerAsn *int `pulumi:"peerAsn"`
	// The BGP address on the other side.
	PeerBgpIp *string `pulumi:"peerBgpIp"`
	// The negotiation status of the BGP routing protocol. Valid values: `success`, `false`.
	Status *string `pulumi:"status"`
	// The ipsec tunnel segments.
	TunnelCidr *string `pulumi:"tunnelCidr"`
}

type GetConnectionsConnectionVpnBgpConfigArgs added in v3.29.0 

type GetConnectionsConnectionVpnBgpConfigArgs struct {
	// The authentication keys for BGP routing protocols.
	AuthKey pulumi.StringPtrInput `pulumi:"authKey"`
	// The ali cloud side autonomous system.
	LocalAsn pulumi.IntPtrInput `pulumi:"localAsn"`
	// The ali cloud side BGP address.
	LocalBgpIp pulumi.StringPtrInput `pulumi:"localBgpIp"`
	// The counterpart autonomous system number.
	PeerAsn pulumi.IntPtrInput `pulumi:"peerAsn"`
	// The BGP address on the other side.
	PeerBgpIp pulumi.StringPtrInput `pulumi:"peerBgpIp"`
	// The negotiation status of the BGP routing protocol. Valid values: `success`, `false`.
	Status pulumi.StringPtrInput `pulumi:"status"`
	// The ipsec tunnel segments.
	TunnelCidr pulumi.StringPtrInput `pulumi:"tunnelCidr"`
}

func (GetConnectionsConnectionVpnBgpConfigArgs) ElementType added in v3.29.0 

func (GetConnectionsConnectionVpnBgpConfigArgs) ElementType() reflect.Type

func (GetConnectionsConnectionVpnBgpConfigArgs) ToGetConnectionsConnectionVpnBgpConfigOutput added in v3.29.0 

func (i GetConnectionsConnectionVpnBgpConfigArgs) ToGetConnectionsConnectionVpnBgpConfigOutput() GetConnectionsConnectionVpnBgpConfigOutput

func (GetConnectionsConnectionVpnBgpConfigArgs) ToGetConnectionsConnectionVpnBgpConfigOutputWithContext added in v3.29.0 

func (i GetConnectionsConnectionVpnBgpConfigArgs) ToGetConnectionsConnectionVpnBgpConfigOutputWithContext(ctx context.Context) GetConnectionsConnectionVpnBgpConfigOutput

func (GetConnectionsConnectionVpnBgpConfigArgs) ToOutput added in v3.43.1 

func (i GetConnectionsConnectionVpnBgpConfigArgs) ToOutput(ctx context.Context) pulumix.Output[GetConnectionsConnectionVpnBgpConfig]

type GetConnectionsConnectionVpnBgpConfigArray added in v3.29.0 

type GetConnectionsConnectionVpnBgpConfigArray []GetConnectionsConnectionVpnBgpConfigInput

func (GetConnectionsConnectionVpnBgpConfigArray) ElementType added in v3.29.0 

func (GetConnectionsConnectionVpnBgpConfigArray) ElementType() reflect.Type

func (GetConnectionsConnectionVpnBgpConfigArray) ToGetConnectionsConnectionVpnBgpConfigArrayOutput added in v3.29.0 

func (i GetConnectionsConnectionVpnBgpConfigArray) ToGetConnectionsConnectionVpnBgpConfigArrayOutput() GetConnectionsConnectionVpnBgpConfigArrayOutput

func (GetConnectionsConnectionVpnBgpConfigArray) ToGetConnectionsConnectionVpnBgpConfigArrayOutputWithContext added in v3.29.0 

func (i GetConnectionsConnectionVpnBgpConfigArray) ToGetConnectionsConnectionVpnBgpConfigArrayOutputWithContext(ctx context.Context) GetConnectionsConnectionVpnBgpConfigArrayOutput

func (GetConnectionsConnectionVpnBgpConfigArray) ToOutput added in v3.43.1 

func (i GetConnectionsConnectionVpnBgpConfigArray) ToOutput(ctx context.Context) pulumix.Output[[]GetConnectionsConnectionVpnBgpConfig]

type GetConnectionsConnectionVpnBgpConfigArrayInput added in v3.29.0 

type GetConnectionsConnectionVpnBgpConfigArrayInput interface {
	pulumi.Input

	ToGetConnectionsConnectionVpnBgpConfigArrayOutput() GetConnectionsConnectionVpnBgpConfigArrayOutput
	ToGetConnectionsConnectionVpnBgpConfigArrayOutputWithContext(context.Context) GetConnectionsConnectionVpnBgpConfigArrayOutput
}

GetConnectionsConnectionVpnBgpConfigArrayInput is an input type that accepts GetConnectionsConnectionVpnBgpConfigArray and GetConnectionsConnectionVpnBgpConfigArrayOutput values. You can construct a concrete instance of `GetConnectionsConnectionVpnBgpConfigArrayInput` via: 

GetConnectionsConnectionVpnBgpConfigArray{ GetConnectionsConnectionVpnBgpConfigArgs{...} }

type GetConnectionsConnectionVpnBgpConfigArrayOutput added in v3.29.0 

type GetConnectionsConnectionVpnBgpConfigArrayOutput struct{ *pulumi.OutputState }

func (GetConnectionsConnectionVpnBgpConfigArrayOutput) ElementType added in v3.29.0 

func (GetConnectionsConnectionVpnBgpConfigArrayOutput) ElementType() reflect.Type

func (GetConnectionsConnectionVpnBgpConfigArrayOutput) Index added in v3.29.0 

func (o GetConnectionsConnectionVpnBgpConfigArrayOutput) Index(i pulumi.IntInput) GetConnectionsConnectionVpnBgpConfigOutput

func (GetConnectionsConnectionVpnBgpConfigArrayOutput) ToGetConnectionsConnectionVpnBgpConfigArrayOutput added in v3.29.0 

func (o GetConnectionsConnectionVpnBgpConfigArrayOutput) ToGetConnectionsConnectionVpnBgpConfigArrayOutput() GetConnectionsConnectionVpnBgpConfigArrayOutput

func (GetConnectionsConnectionVpnBgpConfigArrayOutput) ToGetConnectionsConnectionVpnBgpConfigArrayOutputWithContext added in v3.29.0 

func (o GetConnectionsConnectionVpnBgpConfigArrayOutput) ToGetConnectionsConnectionVpnBgpConfigArrayOutputWithContext(ctx context.Context) GetConnectionsConnectionVpnBgpConfigArrayOutput

func (GetConnectionsConnectionVpnBgpConfigArrayOutput) ToOutput added in v3.43.1 

func (o GetConnectionsConnectionVpnBgpConfigArrayOutput) ToOutput(ctx context.Context) pulumix.Output[[]GetConnectionsConnectionVpnBgpConfig]

type GetConnectionsConnectionVpnBgpConfigInput added in v3.29.0 

type GetConnectionsConnectionVpnBgpConfigInput interface {
	pulumi.Input

	ToGetConnectionsConnectionVpnBgpConfigOutput() GetConnectionsConnectionVpnBgpConfigOutput
	ToGetConnectionsConnectionVpnBgpConfigOutputWithContext(context.Context) GetConnectionsConnectionVpnBgpConfigOutput
}

GetConnectionsConnectionVpnBgpConfigInput is an input type that accepts GetConnectionsConnectionVpnBgpConfigArgs and GetConnectionsConnectionVpnBgpConfigOutput values. You can construct a concrete instance of `GetConnectionsConnectionVpnBgpConfigInput` via: 

GetConnectionsConnectionVpnBgpConfigArgs{...}

type GetConnectionsConnectionVpnBgpConfigOutput added in v3.29.0 

type GetConnectionsConnectionVpnBgpConfigOutput struct{ *pulumi.OutputState }

func (GetConnectionsConnectionVpnBgpConfigOutput) AuthKey added in v3.29.0 

func (o GetConnectionsConnectionVpnBgpConfigOutput) AuthKey() pulumi.StringPtrOutput

The authentication keys for BGP routing protocols.

func (GetConnectionsConnectionVpnBgpConfigOutput) ElementType added in v3.29.0 

func (GetConnectionsConnectionVpnBgpConfigOutput) ElementType() reflect.Type

func (GetConnectionsConnectionVpnBgpConfigOutput) LocalAsn added in v3.29.0 

func (o GetConnectionsConnectionVpnBgpConfigOutput) LocalAsn() pulumi.IntPtrOutput

The ali cloud side autonomous system.

func (GetConnectionsConnectionVpnBgpConfigOutput) LocalBgpIp added in v3.29.0 

func (o GetConnectionsConnectionVpnBgpConfigOutput) LocalBgpIp() pulumi.StringPtrOutput

The ali cloud side BGP address.

func (GetConnectionsConnectionVpnBgpConfigOutput) PeerAsn added in v3.29.0 

func (o GetConnectionsConnectionVpnBgpConfigOutput) PeerAsn() pulumi.IntPtrOutput

The counterpart autonomous system number.

func (GetConnectionsConnectionVpnBgpConfigOutput) PeerBgpIp added in v3.29.0 

func (o GetConnectionsConnectionVpnBgpConfigOutput) PeerBgpIp() pulumi.StringPtrOutput

The BGP address on the other side.

func (GetConnectionsConnectionVpnBgpConfigOutput) Status added in v3.29.0 

func (o GetConnectionsConnectionVpnBgpConfigOutput) Status() pulumi.StringPtrOutput

The negotiation status of the BGP routing protocol. Valid values: `success`, `false`.

func (GetConnectionsConnectionVpnBgpConfigOutput) ToGetConnectionsConnectionVpnBgpConfigOutput added in v3.29.0 

func (o GetConnectionsConnectionVpnBgpConfigOutput) ToGetConnectionsConnectionVpnBgpConfigOutput() GetConnectionsConnectionVpnBgpConfigOutput

func (GetConnectionsConnectionVpnBgpConfigOutput) ToGetConnectionsConnectionVpnBgpConfigOutputWithContext added in v3.29.0 

func (o GetConnectionsConnectionVpnBgpConfigOutput) ToGetConnectionsConnectionVpnBgpConfigOutputWithContext(ctx context.Context) GetConnectionsConnectionVpnBgpConfigOutput

func (GetConnectionsConnectionVpnBgpConfigOutput) ToOutput added in v3.43.1 

func (o GetConnectionsConnectionVpnBgpConfigOutput) ToOutput(ctx context.Context) pulumix.Output[GetConnectionsConnectionVpnBgpConfig]

func (GetConnectionsConnectionVpnBgpConfigOutput) TunnelCidr added in v3.29.0 

func (o GetConnectionsConnectionVpnBgpConfigOutput) TunnelCidr() pulumi.StringPtrOutput

The ipsec tunnel segments.

type GetConnectionsOutputArgs added in v3.9.0 

type GetConnectionsOutputArgs struct {
	// Use the VPN customer gateway ID as the search key.
	CustomerGatewayId pulumi.StringPtrInput `pulumi:"customerGatewayId"`
	// IDs of the VPN connections.
	Ids pulumi.StringArrayInput `pulumi:"ids"`
	// A regex string of VPN connection name.
	NameRegex pulumi.StringPtrInput `pulumi:"nameRegex"`
	// Save the result to the file.
	OutputFile pulumi.StringPtrInput `pulumi:"outputFile"`
	// Use the VPN gateway ID as the search key.
	VpnGatewayId pulumi.StringPtrInput `pulumi:"vpnGatewayId"`
}

A collection of arguments for invoking getConnections.

func (GetConnectionsOutputArgs) ElementType added in v3.9.0 

func (GetConnectionsOutputArgs) ElementType() reflect.Type

type GetConnectionsResult 

type GetConnectionsResult struct {
	// A list of VPN connections. Each element contains the following attributes:
	Connections []GetConnectionsConnection `pulumi:"connections"`
	// ID of the VPN customer gateway.
	CustomerGatewayId *string `pulumi:"customerGatewayId"`
	// The provider-assigned unique ID for this managed resource.
	Id string `pulumi:"id"`
	// (Optional) IDs of the VPN connections.
	Ids       []string `pulumi:"ids"`
	NameRegex *string  `pulumi:"nameRegex"`
	// (Optional) names of the VPN connections.
	Names      []string `pulumi:"names"`
	OutputFile *string  `pulumi:"outputFile"`
	// ID of the VPN gateway.
	VpnGatewayId *string `pulumi:"vpnGatewayId"`
}

A collection of values returned by getConnections.

func GetConnections 

func GetConnections(ctx *pulumi.Context, args *GetConnectionsArgs, opts ...pulumi.InvokeOption) (*GetConnectionsResult, error)

The VPN connections data source lists lots of VPN connections resource information owned by an Alicloud account.

## Example Usage

```go package main

import ( 

"github.com/pulumi/pulumi-alicloud/sdk/v3/go/alicloud/vpn"
"github.com/pulumi/pulumi/sdk/v3/go/pulumi"

) 

func main() {
	pulumi.Run(func(ctx *pulumi.Context) error {
		_, err := vpn.GetConnections(ctx, &vpn.GetConnectionsArgs{
			CustomerGatewayId: pulumi.StringRef("fake-cgw-id"),
			Ids: []string{
				"fake-conn-id",
			},
			OutputFile:   pulumi.StringRef("/tmp/vpnconn"),
			VpnGatewayId: pulumi.StringRef("fake-vpn-id"),
		}, nil)
		if err != nil {
			return err
		}
		return nil
	})
}

```

type GetConnectionsResultOutput added in v3.9.0 

type GetConnectionsResultOutput struct{ *pulumi.OutputState }

A collection of values returned by getConnections.

func GetConnectionsOutput added in v3.9.0 

func GetConnectionsOutput(ctx *pulumi.Context, args GetConnectionsOutputArgs, opts ...pulumi.InvokeOption) GetConnectionsResultOutput

func (GetConnectionsResultOutput) Connections added in v3.9.0 

func (o GetConnectionsResultOutput) Connections() GetConnectionsConnectionArrayOutput

A list of VPN connections. Each element contains the following attributes:

func (GetConnectionsResultOutput) CustomerGatewayId added in v3.9.0 

func (o GetConnectionsResultOutput) CustomerGatewayId() pulumi.StringPtrOutput

ID of the VPN customer gateway.

func (GetConnectionsResultOutput) ElementType added in v3.9.0 

func (GetConnectionsResultOutput) ElementType() reflect.Type

func (GetConnectionsResultOutput) Id added in v3.9.0 

func (o GetConnectionsResultOutput) Id() pulumi.StringOutput

The provider-assigned unique ID for this managed resource.

func (GetConnectionsResultOutput) Ids added in v3.9.0 

func (o GetConnectionsResultOutput) Ids() pulumi.StringArrayOutput

(Optional) IDs of the VPN connections.

func (GetConnectionsResultOutput) NameRegex added in v3.9.0 

func (o GetConnectionsResultOutput) NameRegex() pulumi.StringPtrOutput

func (GetConnectionsResultOutput) Names added in v3.9.0 

func (o GetConnectionsResultOutput) Names() pulumi.StringArrayOutput

(Optional) names of the VPN connections.

func (GetConnectionsResultOutput) OutputFile added in v3.9.0 

func (o GetConnectionsResultOutput) OutputFile() pulumi.StringPtrOutput

func (GetConnectionsResultOutput) ToGetConnectionsResultOutput added in v3.9.0 

func (o GetConnectionsResultOutput) ToGetConnectionsResultOutput() GetConnectionsResultOutput

func (GetConnectionsResultOutput) ToGetConnectionsResultOutputWithContext added in v3.9.0 

func (o GetConnectionsResultOutput) ToGetConnectionsResultOutputWithContext(ctx context.Context) GetConnectionsResultOutput

func (GetConnectionsResultOutput) ToOutput added in v3.43.1 

func (o GetConnectionsResultOutput) ToOutput(ctx context.Context) pulumix.Output[GetConnectionsResult]

func (GetConnectionsResultOutput) VpnGatewayId added in v3.9.0 

func (o GetConnectionsResultOutput) VpnGatewayId() pulumi.StringPtrOutput

ID of the VPN gateway.

type GetCustomerGatewaysArgs 

type GetCustomerGatewaysArgs struct {
	// ID of the VPN customer gateways.
	Ids []string `pulumi:"ids"`
	// A regex string of VPN customer gateways name.
	NameRegex *string `pulumi:"nameRegex"`
	// Save the result to the file.
	OutputFile *string `pulumi:"outputFile"`
}

A collection of arguments for invoking getCustomerGateways.

type GetCustomerGatewaysGateway 

type GetCustomerGatewaysGateway struct {
	// The autonomous system number of the local data center gateway device of the VPN customer gateway.
	Asn int `pulumi:"asn"`
	// The creation time of the VPN customer gateway.
	CreateTime string `pulumi:"createTime"`
	// The description of the VPN customer gateway.
	Description string `pulumi:"description"`
	// ID of the VPN customer gateway .
	Id string `pulumi:"id"`
	// The ip address of the VPN customer gateway.
	IpAddress string `pulumi:"ipAddress"`
	// The name of the VPN customer gateway.
	Name string `pulumi:"name"`
}

type GetCustomerGatewaysGatewayArgs 

type GetCustomerGatewaysGatewayArgs struct {
	// The autonomous system number of the local data center gateway device of the VPN customer gateway.
	Asn pulumi.IntInput `pulumi:"asn"`
	// The creation time of the VPN customer gateway.
	CreateTime pulumi.StringInput `pulumi:"createTime"`
	// The description of the VPN customer gateway.
	Description pulumi.StringInput `pulumi:"description"`
	// ID of the VPN customer gateway .
	Id pulumi.StringInput `pulumi:"id"`
	// The ip address of the VPN customer gateway.
	IpAddress pulumi.StringInput `pulumi:"ipAddress"`
	// The name of the VPN customer gateway.
	Name pulumi.StringInput `pulumi:"name"`
}

func (GetCustomerGatewaysGatewayArgs) ElementType 

func (GetCustomerGatewaysGatewayArgs) ElementType() reflect.Type

func (GetCustomerGatewaysGatewayArgs) ToGetCustomerGatewaysGatewayOutput 

func (i GetCustomerGatewaysGatewayArgs) ToGetCustomerGatewaysGatewayOutput() GetCustomerGatewaysGatewayOutput

func (GetCustomerGatewaysGatewayArgs) ToGetCustomerGatewaysGatewayOutputWithContext 

func (i GetCustomerGatewaysGatewayArgs) ToGetCustomerGatewaysGatewayOutputWithContext(ctx context.Context) GetCustomerGatewaysGatewayOutput

func (GetCustomerGatewaysGatewayArgs) ToOutput added in v3.43.1 

func (i GetCustomerGatewaysGatewayArgs) ToOutput(ctx context.Context) pulumix.Output[GetCustomerGatewaysGateway]

type GetCustomerGatewaysGatewayArray 

type GetCustomerGatewaysGatewayArray []GetCustomerGatewaysGatewayInput

func (GetCustomerGatewaysGatewayArray) ElementType 

func (GetCustomerGatewaysGatewayArray) ElementType() reflect.Type

func (GetCustomerGatewaysGatewayArray) ToGetCustomerGatewaysGatewayArrayOutput 

func (i GetCustomerGatewaysGatewayArray) ToGetCustomerGatewaysGatewayArrayOutput() GetCustomerGatewaysGatewayArrayOutput

func (GetCustomerGatewaysGatewayArray) ToGetCustomerGatewaysGatewayArrayOutputWithContext 

func (i GetCustomerGatewaysGatewayArray) ToGetCustomerGatewaysGatewayArrayOutputWithContext(ctx context.Context) GetCustomerGatewaysGatewayArrayOutput

func (GetCustomerGatewaysGatewayArray) ToOutput added in v3.43.1 

func (i GetCustomerGatewaysGatewayArray) ToOutput(ctx context.Context) pulumix.Output[[]GetCustomerGatewaysGateway]

type GetCustomerGatewaysGatewayArrayInput 

type GetCustomerGatewaysGatewayArrayInput interface {
	pulumi.Input

	ToGetCustomerGatewaysGatewayArrayOutput() GetCustomerGatewaysGatewayArrayOutput
	ToGetCustomerGatewaysGatewayArrayOutputWithContext(context.Context) GetCustomerGatewaysGatewayArrayOutput
}

GetCustomerGatewaysGatewayArrayInput is an input type that accepts GetCustomerGatewaysGatewayArray and GetCustomerGatewaysGatewayArrayOutput values. You can construct a concrete instance of `GetCustomerGatewaysGatewayArrayInput` via: 

GetCustomerGatewaysGatewayArray{ GetCustomerGatewaysGatewayArgs{...} }

type GetCustomerGatewaysGatewayArrayOutput 

type GetCustomerGatewaysGatewayArrayOutput struct{ *pulumi.OutputState }

func (GetCustomerGatewaysGatewayArrayOutput) ElementType 

func (GetCustomerGatewaysGatewayArrayOutput) ElementType() reflect.Type

func (GetCustomerGatewaysGatewayArrayOutput) Index 

func (o GetCustomerGatewaysGatewayArrayOutput) Index(i pulumi.IntInput) GetCustomerGatewaysGatewayOutput

func (GetCustomerGatewaysGatewayArrayOutput) ToGetCustomerGatewaysGatewayArrayOutput 

func (o GetCustomerGatewaysGatewayArrayOutput) ToGetCustomerGatewaysGatewayArrayOutput() GetCustomerGatewaysGatewayArrayOutput

func (GetCustomerGatewaysGatewayArrayOutput) ToGetCustomerGatewaysGatewayArrayOutputWithContext 

func (o GetCustomerGatewaysGatewayArrayOutput) ToGetCustomerGatewaysGatewayArrayOutputWithContext(ctx context.Context) GetCustomerGatewaysGatewayArrayOutput

func (GetCustomerGatewaysGatewayArrayOutput) ToOutput added in v3.43.1 

func (o GetCustomerGatewaysGatewayArrayOutput) ToOutput(ctx context.Context) pulumix.Output[[]GetCustomerGatewaysGateway]

type GetCustomerGatewaysGatewayInput 

type GetCustomerGatewaysGatewayInput interface {
	pulumi.Input

	ToGetCustomerGatewaysGatewayOutput() GetCustomerGatewaysGatewayOutput
	ToGetCustomerGatewaysGatewayOutputWithContext(context.Context) GetCustomerGatewaysGatewayOutput
}

GetCustomerGatewaysGatewayInput is an input type that accepts GetCustomerGatewaysGatewayArgs and GetCustomerGatewaysGatewayOutput values. You can construct a concrete instance of `GetCustomerGatewaysGatewayInput` via: 

GetCustomerGatewaysGatewayArgs{...}

type GetCustomerGatewaysGatewayOutput 

type GetCustomerGatewaysGatewayOutput struct{ *pulumi.OutputState }

func (GetCustomerGatewaysGatewayOutput) Asn added in v3.29.0 

func (o GetCustomerGatewaysGatewayOutput) Asn() pulumi.IntOutput

The autonomous system number of the local data center gateway device of the VPN customer gateway.

func (GetCustomerGatewaysGatewayOutput) CreateTime 

func (o GetCustomerGatewaysGatewayOutput) CreateTime() pulumi.StringOutput

The creation time of the VPN customer gateway.

func (GetCustomerGatewaysGatewayOutput) Description 

func (o GetCustomerGatewaysGatewayOutput) Description() pulumi.StringOutput

The description of the VPN customer gateway.

func (GetCustomerGatewaysGatewayOutput) ElementType 

func (GetCustomerGatewaysGatewayOutput) ElementType() reflect.Type

func (GetCustomerGatewaysGatewayOutput) Id 

func (o GetCustomerGatewaysGatewayOutput) Id() pulumi.StringOutput

ID of the VPN customer gateway .

func (GetCustomerGatewaysGatewayOutput) IpAddress 

func (o GetCustomerGatewaysGatewayOutput) IpAddress() pulumi.StringOutput

The ip address of the VPN customer gateway.

func (GetCustomerGatewaysGatewayOutput) Name 

func (o GetCustomerGatewaysGatewayOutput) Name() pulumi.StringOutput

The name of the VPN customer gateway.

func (GetCustomerGatewaysGatewayOutput) ToGetCustomerGatewaysGatewayOutput 

func (o GetCustomerGatewaysGatewayOutput) ToGetCustomerGatewaysGatewayOutput() GetCustomerGatewaysGatewayOutput

func (GetCustomerGatewaysGatewayOutput) ToGetCustomerGatewaysGatewayOutputWithContext 

func (o GetCustomerGatewaysGatewayOutput) ToGetCustomerGatewaysGatewayOutputWithContext(ctx context.Context) GetCustomerGatewaysGatewayOutput

func (GetCustomerGatewaysGatewayOutput) ToOutput added in v3.43.1 

func (o GetCustomerGatewaysGatewayOutput) ToOutput(ctx context.Context) pulumix.Output[GetCustomerGatewaysGateway]

type GetCustomerGatewaysOutputArgs added in v3.9.0 

type GetCustomerGatewaysOutputArgs struct {
	// ID of the VPN customer gateways.
	Ids pulumi.StringArrayInput `pulumi:"ids"`
	// A regex string of VPN customer gateways name.
	NameRegex pulumi.StringPtrInput `pulumi:"nameRegex"`
	// Save the result to the file.
	OutputFile pulumi.StringPtrInput `pulumi:"outputFile"`
}

A collection of arguments for invoking getCustomerGateways.

func (GetCustomerGatewaysOutputArgs) ElementType added in v3.9.0 

func (GetCustomerGatewaysOutputArgs) ElementType() reflect.Type

type GetCustomerGatewaysResult 

type GetCustomerGatewaysResult struct {
	// A list of VPN customer gateways. Each element contains the following attributes:
	Gateways []GetCustomerGatewaysGateway `pulumi:"gateways"`
	// The provider-assigned unique ID for this managed resource.
	Id string `pulumi:"id"`
	// IDs of VPN customer gateway.
	Ids       []string `pulumi:"ids"`
	NameRegex *string  `pulumi:"nameRegex"`
	// names of VPN customer gateway.
	Names      []string `pulumi:"names"`
	OutputFile *string  `pulumi:"outputFile"`
}

A collection of values returned by getCustomerGateways.

func GetCustomerGateways 

func GetCustomerGateways(ctx *pulumi.Context, args *GetCustomerGatewaysArgs, opts ...pulumi.InvokeOption) (*GetCustomerGatewaysResult, error)

The VPN customers gateways data source lists a number of VPN customer gateways resource information owned by an Alicloud account.

## Example Usage

```go package main

import ( 

"github.com/pulumi/pulumi-alicloud/sdk/v3/go/alicloud/vpn"
"github.com/pulumi/pulumi/sdk/v3/go/pulumi"

) 

func main() {
	pulumi.Run(func(ctx *pulumi.Context) error {
		_, err := vpn.GetCustomerGateways(ctx, &vpn.GetCustomerGatewaysArgs{
			Ids: []string{
				"fake-id1",
				"fake-id2",
			},
			NameRegex:  pulumi.StringRef("testAcc*"),
			OutputFile: pulumi.StringRef("/tmp/cgws"),
		}, nil)
		if err != nil {
			return err
		}
		return nil
	})
}

```

type GetCustomerGatewaysResultOutput added in v3.9.0 

type GetCustomerGatewaysResultOutput struct{ *pulumi.OutputState }

A collection of values returned by getCustomerGateways.

func GetCustomerGatewaysOutput added in v3.9.0 

func GetCustomerGatewaysOutput(ctx *pulumi.Context, args GetCustomerGatewaysOutputArgs, opts ...pulumi.InvokeOption) GetCustomerGatewaysResultOutput

func (GetCustomerGatewaysResultOutput) ElementType added in v3.9.0 

func (GetCustomerGatewaysResultOutput) ElementType() reflect.Type

func (GetCustomerGatewaysResultOutput) Gateways added in v3.9.0 

func (o GetCustomerGatewaysResultOutput) Gateways() GetCustomerGatewaysGatewayArrayOutput

A list of VPN customer gateways. Each element contains the following attributes:

func (GetCustomerGatewaysResultOutput) Id added in v3.9.0 

func (o GetCustomerGatewaysResultOutput) Id() pulumi.StringOutput

The provider-assigned unique ID for this managed resource.

func (GetCustomerGatewaysResultOutput) Ids added in v3.9.0 

func (o GetCustomerGatewaysResultOutput) Ids() pulumi.StringArrayOutput

IDs of VPN customer gateway.

func (GetCustomerGatewaysResultOutput) NameRegex added in v3.9.0 

func (o GetCustomerGatewaysResultOutput) NameRegex() pulumi.StringPtrOutput

func (GetCustomerGatewaysResultOutput) Names added in v3.9.0 

func (o GetCustomerGatewaysResultOutput) Names() pulumi.StringArrayOutput

names of VPN customer gateway.

func (GetCustomerGatewaysResultOutput) OutputFile added in v3.9.0 

func (o GetCustomerGatewaysResultOutput) OutputFile() pulumi.StringPtrOutput

func (GetCustomerGatewaysResultOutput) ToGetCustomerGatewaysResultOutput added in v3.9.0 

func (o GetCustomerGatewaysResultOutput) ToGetCustomerGatewaysResultOutput() GetCustomerGatewaysResultOutput

func (GetCustomerGatewaysResultOutput) ToGetCustomerGatewaysResultOutputWithContext added in v3.9.0 

func (o GetCustomerGatewaysResultOutput) ToGetCustomerGatewaysResultOutputWithContext(ctx context.Context) GetCustomerGatewaysResultOutput

func (GetCustomerGatewaysResultOutput) ToOutput added in v3.43.1 

func (o GetCustomerGatewaysResultOutput) ToOutput(ctx context.Context) pulumix.Output[GetCustomerGatewaysResult]

type GetGatewayVcoRoutesArgs added in v3.29.0 

type GetGatewayVcoRoutesArgs struct {
	// A list of Vco Route IDs.
	Ids []string `pulumi:"ids"`
	// File name where to save data source results (after running `pulumi preview`).
	OutputFile *string `pulumi:"outputFile"`
	PageNumber *int    `pulumi:"pageNumber"`
	PageSize   *int    `pulumi:"pageSize"`
	// The Routing input type. Valid values: `custom`, `bgp`.
	RouteEntryType *string `pulumi:"routeEntryType"`
	// The status of the vpn route entry.
	Status *string `pulumi:"status"`
	// The id of the vpn connection.
	VpnConnectionId string `pulumi:"vpnConnectionId"`
}

A collection of arguments for invoking getGatewayVcoRoutes.

type GetGatewayVcoRoutesOutputArgs added in v3.29.0 

type GetGatewayVcoRoutesOutputArgs struct {
	// A list of Vco Route IDs.
	Ids pulumi.StringArrayInput `pulumi:"ids"`
	// File name where to save data source results (after running `pulumi preview`).
	OutputFile pulumi.StringPtrInput `pulumi:"outputFile"`
	PageNumber pulumi.IntPtrInput    `pulumi:"pageNumber"`
	PageSize   pulumi.IntPtrInput    `pulumi:"pageSize"`
	// The Routing input type. Valid values: `custom`, `bgp`.
	RouteEntryType pulumi.StringPtrInput `pulumi:"routeEntryType"`
	// The status of the vpn route entry.
	Status pulumi.StringPtrInput `pulumi:"status"`
	// The id of the vpn connection.
	VpnConnectionId pulumi.StringInput `pulumi:"vpnConnectionId"`
}

A collection of arguments for invoking getGatewayVcoRoutes.

func (GetGatewayVcoRoutesOutputArgs) ElementType added in v3.29.0 

func (GetGatewayVcoRoutesOutputArgs) ElementType() reflect.Type

type GetGatewayVcoRoutesResult added in v3.29.0 

type GetGatewayVcoRoutesResult struct {
	// The provider-assigned unique ID for this managed resource.
	Id              string                     `pulumi:"id"`
	Ids             []string                   `pulumi:"ids"`
	OutputFile      *string                    `pulumi:"outputFile"`
	PageNumber      *int                       `pulumi:"pageNumber"`
	PageSize        *int                       `pulumi:"pageSize"`
	RouteEntryType  *string                    `pulumi:"routeEntryType"`
	Routes          []GetGatewayVcoRoutesRoute `pulumi:"routes"`
	Status          *string                    `pulumi:"status"`
	VpnConnectionId string                     `pulumi:"vpnConnectionId"`
}

A collection of values returned by getGatewayVcoRoutes.

func GetGatewayVcoRoutes added in v3.29.0 

func GetGatewayVcoRoutes(ctx *pulumi.Context, args *GetGatewayVcoRoutesArgs, opts ...pulumi.InvokeOption) (*GetGatewayVcoRoutesResult, error)

This data source provides the Vpn Gateway Vco Routes of the current Alibaba Cloud user.

> **NOTE:** Available in v1.183.0+.

## Example Usage

Basic Usage

```go package main

import ( 

"github.com/pulumi/pulumi-alicloud/sdk/v3/go/alicloud/cen"
"github.com/pulumi/pulumi-alicloud/sdk/v3/go/alicloud/vpn"
"github.com/pulumi/pulumi/sdk/v3/go/pulumi"

) 

func main() {
	pulumi.Run(func(ctx *pulumi.Context) error {
		defaultInstance, err := cen.NewInstance(ctx, "defaultInstance", &cen.InstanceArgs{
			CenInstanceName: pulumi.Any(_var.Name),
		})
		if err != nil {
			return err
		}
		defaultTransitRouter, err := cen.NewTransitRouter(ctx, "defaultTransitRouter", &cen.TransitRouterArgs{
			CenId:                    defaultInstance.ID(),
			TransitRouterDescription: pulumi.String("desd"),
			TransitRouterName:        pulumi.Any(_var.Name),
		})
		if err != nil {
			return err
		}
		defaultTransitRouterAvailableResources, err := cen.GetTransitRouterAvailableResources(ctx, nil, nil)
		if err != nil {
			return err
		}
		defaultCustomerGateway, err := vpn.NewCustomerGateway(ctx, "defaultCustomerGateway", &vpn.CustomerGatewayArgs{
			IpAddress:   pulumi.String("42.104.22.210"),
			Asn:         pulumi.String("45014"),
			Description: pulumi.String("testAccVpnConnectionDesc"),
		})
		if err != nil {
			return err
		}
		defaultGatewayVpnAttachment, err := vpn.NewGatewayVpnAttachment(ctx, "defaultGatewayVpnAttachment", &vpn.GatewayVpnAttachmentArgs{
			CustomerGatewayId: defaultCustomerGateway.ID(),
			NetworkType:       pulumi.String("public"),
			LocalSubnet:       pulumi.String("0.0.0.0/0"),
			RemoteSubnet:      pulumi.String("0.0.0.0/0"),
			EffectImmediately: pulumi.Bool(false),
			IkeConfig: &vpn.GatewayVpnAttachmentIkeConfigArgs{
				IkeAuthAlg:  pulumi.String("md5"),
				IkeEncAlg:   pulumi.String("des"),
				IkeVersion:  pulumi.String("ikev2"),
				IkeMode:     pulumi.String("main"),
				IkeLifetime: pulumi.Int(86400),
				Psk:         pulumi.String("tf-testvpn2"),
				IkePfs:      pulumi.String("group1"),
				RemoteId:    pulumi.String("testbob2"),
				LocalId:     pulumi.String("testalice2"),
			},
			IpsecConfig: &vpn.GatewayVpnAttachmentIpsecConfigArgs{
				IpsecPfs:      pulumi.String("group5"),
				IpsecEncAlg:   pulumi.String("des"),
				IpsecAuthAlg:  pulumi.String("md5"),
				IpsecLifetime: pulumi.Int(86400),
			},
			BgpConfig: &vpn.GatewayVpnAttachmentBgpConfigArgs{
				Enable:     pulumi.Bool(true),
				LocalAsn:   pulumi.Int(45014),
				TunnelCidr: pulumi.String("169.254.11.0/30"),
				LocalBgpIp: pulumi.String("169.254.11.1"),
			},
			HealthCheckConfig: &vpn.GatewayVpnAttachmentHealthCheckConfigArgs{
				Enable:   pulumi.Bool(true),
				Sip:      pulumi.String("192.168.1.1"),
				Dip:      pulumi.String("10.0.0.1"),
				Interval: pulumi.Int(10),
				Retry:    pulumi.Int(10),
				Policy:   pulumi.String("revoke_route"),
			},
			EnableDpd:          pulumi.Bool(true),
			EnableNatTraversal: pulumi.Bool(true),
			VpnAttachmentName:  pulumi.Any(_var.Name),
		})
		if err != nil {
			return err
		}
		defaultTransitRouterVpnAttachment, err := cen.NewTransitRouterVpnAttachment(ctx, "defaultTransitRouterVpnAttachment", &cen.TransitRouterVpnAttachmentArgs{
			AutoPublishRouteEnabled:            pulumi.Bool(false),
			TransitRouterAttachmentDescription: pulumi.Any(_var.Name),
			TransitRouterAttachmentName:        pulumi.Any(_var.Name),
			CenId:                              defaultTransitRouter.CenId,
			TransitRouterId:                    defaultTransitRouter.TransitRouterId,
			VpnId:                              defaultGatewayVpnAttachment.ID(),
			Zones: cen.TransitRouterVpnAttachmentZoneArray{
				&cen.TransitRouterVpnAttachmentZoneArgs{
					ZoneId: *pulumi.String(defaultTransitRouterAvailableResources.Resources[0].MasterZones[0]),
				},
			},
		})
		if err != nil {
			return err
		}
		_, err = vpn.NewGatewayVcoRoute(ctx, "defaultGatewayVcoRoute", &vpn.GatewayVcoRouteArgs{
			RouteDest:       pulumi.String("192.168.12.0/24"),
			NextHop:         defaultTransitRouterVpnAttachment.VpnId,
			VpnConnectionId: defaultTransitRouterVpnAttachment.VpnId,
			Weight:          pulumi.Int(100),
		})
		if err != nil {
			return err
		}
		_ = vpn.GetGatewayVcoRoutesOutput(ctx, vpn.GetGatewayVcoRoutesOutputArgs{
			VpnConnectionId: defaultTransitRouterVpnAttachment.VpnId,
		}, nil)
		ctx.Export("vpnGatewayVcoRouteId1", data.Alicloud_vpn_gateway_vco_routes.Ids.Routes[0].Id)
		return nil
	})
}

```

type GetGatewayVcoRoutesResultOutput added in v3.29.0 

type GetGatewayVcoRoutesResultOutput struct{ *pulumi.OutputState }

A collection of values returned by getGatewayVcoRoutes.

func GetGatewayVcoRoutesOutput added in v3.29.0 

func GetGatewayVcoRoutesOutput(ctx *pulumi.Context, args GetGatewayVcoRoutesOutputArgs, opts ...pulumi.InvokeOption) GetGatewayVcoRoutesResultOutput

func (GetGatewayVcoRoutesResultOutput) ElementType added in v3.29.0 

func (GetGatewayVcoRoutesResultOutput) ElementType() reflect.Type

func (GetGatewayVcoRoutesResultOutput) Id added in v3.29.0 

func (o GetGatewayVcoRoutesResultOutput) Id() pulumi.StringOutput

The provider-assigned unique ID for this managed resource.

func (GetGatewayVcoRoutesResultOutput) Ids added in v3.29.0 

func (o GetGatewayVcoRoutesResultOutput) Ids() pulumi.StringArrayOutput

func (GetGatewayVcoRoutesResultOutput) OutputFile added in v3.29.0 

func (o GetGatewayVcoRoutesResultOutput) OutputFile() pulumi.StringPtrOutput

func (GetGatewayVcoRoutesResultOutput) PageNumber added in v3.29.0 

func (o GetGatewayVcoRoutesResultOutput) PageNumber() pulumi.IntPtrOutput

func (GetGatewayVcoRoutesResultOutput) PageSize added in v3.29.0 

func (o GetGatewayVcoRoutesResultOutput) PageSize() pulumi.IntPtrOutput

func (GetGatewayVcoRoutesResultOutput) RouteEntryType added in v3.29.0 

func (o GetGatewayVcoRoutesResultOutput) RouteEntryType() pulumi.StringPtrOutput

func (GetGatewayVcoRoutesResultOutput) Routes added in v3.29.0 

func (o GetGatewayVcoRoutesResultOutput) Routes() GetGatewayVcoRoutesRouteArrayOutput

func (GetGatewayVcoRoutesResultOutput) Status added in v3.29.0 

func (o GetGatewayVcoRoutesResultOutput) Status() pulumi.StringPtrOutput

func (GetGatewayVcoRoutesResultOutput) ToGetGatewayVcoRoutesResultOutput added in v3.29.0 

func (o GetGatewayVcoRoutesResultOutput) ToGetGatewayVcoRoutesResultOutput() GetGatewayVcoRoutesResultOutput

func (GetGatewayVcoRoutesResultOutput) ToGetGatewayVcoRoutesResultOutputWithContext added in v3.29.0 

func (o GetGatewayVcoRoutesResultOutput) ToGetGatewayVcoRoutesResultOutputWithContext(ctx context.Context) GetGatewayVcoRoutesResultOutput

func (GetGatewayVcoRoutesResultOutput) ToOutput added in v3.43.1 

func (o GetGatewayVcoRoutesResultOutput) ToOutput(ctx context.Context) pulumix.Output[GetGatewayVcoRoutesResult]

func (GetGatewayVcoRoutesResultOutput) VpnConnectionId added in v3.29.0 

func (o GetGatewayVcoRoutesResultOutput) VpnConnectionId() pulumi.StringOutput

type GetGatewayVcoRoutesRoute added in v3.29.0 

type GetGatewayVcoRoutesRoute struct {
	// List of autonomous system numbers through which BGP routing entries pass.
	AsPath string `pulumi:"asPath"`
	// The creation time of the VPN destination route.
	CreateTime string `pulumi:"createTime"`
	// The ID of the Vpn Gateway Vco Routes.
	Id string `pulumi:"id"`
	// The next hop of the destination route.
	NextHop string `pulumi:"nextHop"`
	// The destination network segment of the destination route.
	RouteDest string `pulumi:"routeDest"`
	// The source CIDR block of the destination route.
	Source string `pulumi:"source"`
	// The status of the vpn route entry.
	Status string `pulumi:"status"`
	// The id of the vpn connection.
	VpnConnectionId string `pulumi:"vpnConnectionId"`
	// The weight value of the destination route.
	Weight int `pulumi:"weight"`
}

type GetGatewayVcoRoutesRouteArgs added in v3.29.0 

type GetGatewayVcoRoutesRouteArgs struct {
	// List of autonomous system numbers through which BGP routing entries pass.
	AsPath pulumi.StringInput `pulumi:"asPath"`
	// The creation time of the VPN destination route.
	CreateTime pulumi.StringInput `pulumi:"createTime"`
	// The ID of the Vpn Gateway Vco Routes.
	Id pulumi.StringInput `pulumi:"id"`
	// The next hop of the destination route.
	NextHop pulumi.StringInput `pulumi:"nextHop"`
	// The destination network segment of the destination route.
	RouteDest pulumi.StringInput `pulumi:"routeDest"`
	// The source CIDR block of the destination route.
	Source pulumi.StringInput `pulumi:"source"`
	// The status of the vpn route entry.
	Status pulumi.StringInput `pulumi:"status"`
	// The id of the vpn connection.
	VpnConnectionId pulumi.StringInput `pulumi:"vpnConnectionId"`
	// The weight value of the destination route.
	Weight pulumi.IntInput `pulumi:"weight"`
}

func (GetGatewayVcoRoutesRouteArgs) ElementType added in v3.29.0 

func (GetGatewayVcoRoutesRouteArgs) ElementType() reflect.Type

func (GetGatewayVcoRoutesRouteArgs) ToGetGatewayVcoRoutesRouteOutput added in v3.29.0 

func (i GetGatewayVcoRoutesRouteArgs) ToGetGatewayVcoRoutesRouteOutput() GetGatewayVcoRoutesRouteOutput

func (GetGatewayVcoRoutesRouteArgs) ToGetGatewayVcoRoutesRouteOutputWithContext added in v3.29.0 

func (i GetGatewayVcoRoutesRouteArgs) ToGetGatewayVcoRoutesRouteOutputWithContext(ctx context.Context) GetGatewayVcoRoutesRouteOutput

func (GetGatewayVcoRoutesRouteArgs) ToOutput added in v3.43.1 

func (i GetGatewayVcoRoutesRouteArgs) ToOutput(ctx context.Context) pulumix.Output[GetGatewayVcoRoutesRoute]

type GetGatewayVcoRoutesRouteArray added in v3.29.0 

type GetGatewayVcoRoutesRouteArray []GetGatewayVcoRoutesRouteInput

func (GetGatewayVcoRoutesRouteArray) ElementType added in v3.29.0 

func (GetGatewayVcoRoutesRouteArray) ElementType() reflect.Type

func (GetGatewayVcoRoutesRouteArray) ToGetGatewayVcoRoutesRouteArrayOutput added in v3.29.0 

func (i GetGatewayVcoRoutesRouteArray) ToGetGatewayVcoRoutesRouteArrayOutput() GetGatewayVcoRoutesRouteArrayOutput

func (GetGatewayVcoRoutesRouteArray) ToGetGatewayVcoRoutesRouteArrayOutputWithContext added in v3.29.0 

func (i GetGatewayVcoRoutesRouteArray) ToGetGatewayVcoRoutesRouteArrayOutputWithContext(ctx context.Context) GetGatewayVcoRoutesRouteArrayOutput

func (GetGatewayVcoRoutesRouteArray) ToOutput added in v3.43.1 

func (i GetGatewayVcoRoutesRouteArray) ToOutput(ctx context.Context) pulumix.Output[[]GetGatewayVcoRoutesRoute]

type GetGatewayVcoRoutesRouteArrayInput added in v3.29.0 

type GetGatewayVcoRoutesRouteArrayInput interface {
	pulumi.Input

	ToGetGatewayVcoRoutesRouteArrayOutput() GetGatewayVcoRoutesRouteArrayOutput
	ToGetGatewayVcoRoutesRouteArrayOutputWithContext(context.Context) GetGatewayVcoRoutesRouteArrayOutput
}

GetGatewayVcoRoutesRouteArrayInput is an input type that accepts GetGatewayVcoRoutesRouteArray and GetGatewayVcoRoutesRouteArrayOutput values. You can construct a concrete instance of `GetGatewayVcoRoutesRouteArrayInput` via: 

GetGatewayVcoRoutesRouteArray{ GetGatewayVcoRoutesRouteArgs{...} }

type GetGatewayVcoRoutesRouteArrayOutput added in v3.29.0 

type GetGatewayVcoRoutesRouteArrayOutput struct{ *pulumi.OutputState }

func (GetGatewayVcoRoutesRouteArrayOutput) ElementType added in v3.29.0 

func (GetGatewayVcoRoutesRouteArrayOutput) ElementType() reflect.Type

func (GetGatewayVcoRoutesRouteArrayOutput) Index added in v3.29.0 

func (o GetGatewayVcoRoutesRouteArrayOutput) Index(i pulumi.IntInput) GetGatewayVcoRoutesRouteOutput

func (GetGatewayVcoRoutesRouteArrayOutput) ToGetGatewayVcoRoutesRouteArrayOutput added in v3.29.0 

func (o GetGatewayVcoRoutesRouteArrayOutput) ToGetGatewayVcoRoutesRouteArrayOutput() GetGatewayVcoRoutesRouteArrayOutput

func (GetGatewayVcoRoutesRouteArrayOutput) ToGetGatewayVcoRoutesRouteArrayOutputWithContext added in v3.29.0 

func (o GetGatewayVcoRoutesRouteArrayOutput) ToGetGatewayVcoRoutesRouteArrayOutputWithContext(ctx context.Context) GetGatewayVcoRoutesRouteArrayOutput

func (GetGatewayVcoRoutesRouteArrayOutput) ToOutput added in v3.43.1 

func (o GetGatewayVcoRoutesRouteArrayOutput) ToOutput(ctx context.Context) pulumix.Output[[]GetGatewayVcoRoutesRoute]

type GetGatewayVcoRoutesRouteInput added in v3.29.0 

type GetGatewayVcoRoutesRouteInput interface {
	pulumi.Input

	ToGetGatewayVcoRoutesRouteOutput() GetGatewayVcoRoutesRouteOutput
	ToGetGatewayVcoRoutesRouteOutputWithContext(context.Context) GetGatewayVcoRoutesRouteOutput
}

GetGatewayVcoRoutesRouteInput is an input type that accepts GetGatewayVcoRoutesRouteArgs and GetGatewayVcoRoutesRouteOutput values. You can construct a concrete instance of `GetGatewayVcoRoutesRouteInput` via: 

GetGatewayVcoRoutesRouteArgs{...}

type GetGatewayVcoRoutesRouteOutput added in v3.29.0 

type GetGatewayVcoRoutesRouteOutput struct{ *pulumi.OutputState }

func (GetGatewayVcoRoutesRouteOutput) AsPath added in v3.29.0 

func (o GetGatewayVcoRoutesRouteOutput) AsPath() pulumi.StringOutput

List of autonomous system numbers through which BGP routing entries pass.

func (GetGatewayVcoRoutesRouteOutput) CreateTime added in v3.29.0 

func (o GetGatewayVcoRoutesRouteOutput) CreateTime() pulumi.StringOutput

The creation time of the VPN destination route.

func (GetGatewayVcoRoutesRouteOutput) ElementType added in v3.29.0 

func (GetGatewayVcoRoutesRouteOutput) ElementType() reflect.Type

func (GetGatewayVcoRoutesRouteOutput) Id added in v3.29.0 

func (o GetGatewayVcoRoutesRouteOutput) Id() pulumi.StringOutput

The ID of the Vpn Gateway Vco Routes.

func (GetGatewayVcoRoutesRouteOutput) NextHop added in v3.29.0 

func (o GetGatewayVcoRoutesRouteOutput) NextHop() pulumi.StringOutput

The next hop of the destination route.

func (GetGatewayVcoRoutesRouteOutput) RouteDest added in v3.29.0 

func (o GetGatewayVcoRoutesRouteOutput) RouteDest() pulumi.StringOutput

The destination network segment of the destination route.

func (GetGatewayVcoRoutesRouteOutput) Source added in v3.29.0 

func (o GetGatewayVcoRoutesRouteOutput) Source() pulumi.StringOutput

The source CIDR block of the destination route.

func (GetGatewayVcoRoutesRouteOutput) Status added in v3.29.0 

func (o GetGatewayVcoRoutesRouteOutput) Status() pulumi.StringOutput

The status of the vpn route entry.

func (GetGatewayVcoRoutesRouteOutput) ToGetGatewayVcoRoutesRouteOutput added in v3.29.0 

func (o GetGatewayVcoRoutesRouteOutput) ToGetGatewayVcoRoutesRouteOutput() GetGatewayVcoRoutesRouteOutput

func (GetGatewayVcoRoutesRouteOutput) ToGetGatewayVcoRoutesRouteOutputWithContext added in v3.29.0 

func (o GetGatewayVcoRoutesRouteOutput) ToGetGatewayVcoRoutesRouteOutputWithContext(ctx context.Context) GetGatewayVcoRoutesRouteOutput

func (GetGatewayVcoRoutesRouteOutput) ToOutput added in v3.43.1 

func (o GetGatewayVcoRoutesRouteOutput) ToOutput(ctx context.Context) pulumix.Output[GetGatewayVcoRoutesRoute]

func (GetGatewayVcoRoutesRouteOutput) VpnConnectionId added in v3.29.0 

func (o GetGatewayVcoRoutesRouteOutput) VpnConnectionId() pulumi.StringOutput

The id of the vpn connection.

func (GetGatewayVcoRoutesRouteOutput) Weight added in v3.29.0 

func (o GetGatewayVcoRoutesRouteOutput) Weight() pulumi.IntOutput

The weight value of the destination route.

type GetGatewayVpnAttachmentsArgs added in v3.28.0 

type GetGatewayVpnAttachmentsArgs struct {
	// A list of Vpn Attachment IDs.
	Ids []string `pulumi:"ids"`
	// A regex string to filter results by Vpn Attachment name.
	NameRegex *string `pulumi:"nameRegex"`
	// File name where to save data source results (after running `pulumi preview`).
	OutputFile *string `pulumi:"outputFile"`
	PageNumber *int    `pulumi:"pageNumber"`
	PageSize   *int    `pulumi:"pageSize"`
	// The status of the resource.
	Status *string `pulumi:"status"`
	// The parameter 'vpn_gateway_id' has been deprecated from 1.194.0.
	//
	// Deprecated: The parameter 'vpn_gateway_id' has been deprecated from 1.194.0.
	VpnGatewayId *string `pulumi:"vpnGatewayId"`
}

A collection of arguments for invoking getGatewayVpnAttachments.

type GetGatewayVpnAttachmentsAttachment added in v3.28.0 

type GetGatewayVpnAttachmentsAttachment struct {
	// The configurations of the BGP routing protocol.
	BgpConfigs []GetGatewayVpnAttachmentsAttachmentBgpConfig `pulumi:"bgpConfigs"`
	// The status of the IPsec-VPN connection.
	ConnectionStatus string `pulumi:"connectionStatus"`
	// The creation time of the resource.
	CreateTime string `pulumi:"createTime"`
	// The ID of the customer gateway.
	CustomerGatewayId string `pulumi:"customerGatewayId"`
	// Indicates whether IPsec-VPN negotiations are initiated immediately. Valid values.
	EffectImmediately bool `pulumi:"effectImmediately"`
	// The health check configurations.
	HealthCheckConfigs []GetGatewayVpnAttachmentsAttachmentHealthCheckConfig `pulumi:"healthCheckConfigs"`
	// The ID of the Vpn Attachment.
	Id string `pulumi:"id"`
	// Configuration negotiated in the second stage.
	IkeConfigs []GetGatewayVpnAttachmentsAttachmentIkeConfig `pulumi:"ikeConfigs"`
	// The internet ip of the resource. The cen.TransitRouterVpnAttachment resource will not have a value until after it is created.
	InternetIp string `pulumi:"internetIp"`
	// The configuration of Phase 2 negotiations.
	IpsecConfigs []GetGatewayVpnAttachmentsAttachmentIpsecConfig `pulumi:"ipsecConfigs"`
	// The CIDR block of the virtual private cloud (VPC).
	LocalSubnet string `pulumi:"localSubnet"`
	// The network type.
	NetworkType string `pulumi:"networkType"`
	// The CIDR block of the on-premises data center.
	RemoteSubnet string `pulumi:"remoteSubnet"`
	// The status of the resource.
	Status string `pulumi:"status"`
	// The name of the IPsec-VPN connection.
	VpnAttachmentName string `pulumi:"vpnAttachmentName"`
	// The first ID of the resource.
	VpnConnectionId string `pulumi:"vpnConnectionId"`
}

type GetGatewayVpnAttachmentsAttachmentArgs added in v3.28.0 

type GetGatewayVpnAttachmentsAttachmentArgs struct {
	// The configurations of the BGP routing protocol.
	BgpConfigs GetGatewayVpnAttachmentsAttachmentBgpConfigArrayInput `pulumi:"bgpConfigs"`
	// The status of the IPsec-VPN connection.
	ConnectionStatus pulumi.StringInput `pulumi:"connectionStatus"`
	// The creation time of the resource.
	CreateTime pulumi.StringInput `pulumi:"createTime"`
	// The ID of the customer gateway.
	CustomerGatewayId pulumi.StringInput `pulumi:"customerGatewayId"`
	// Indicates whether IPsec-VPN negotiations are initiated immediately. Valid values.
	EffectImmediately pulumi.BoolInput `pulumi:"effectImmediately"`
	// The health check configurations.
	HealthCheckConfigs GetGatewayVpnAttachmentsAttachmentHealthCheckConfigArrayInput `pulumi:"healthCheckConfigs"`
	// The ID of the Vpn Attachment.
	Id pulumi.StringInput `pulumi:"id"`
	// Configuration negotiated in the second stage.
	IkeConfigs GetGatewayVpnAttachmentsAttachmentIkeConfigArrayInput `pulumi:"ikeConfigs"`
	// The internet ip of the resource. The cen.TransitRouterVpnAttachment resource will not have a value until after it is created.
	InternetIp pulumi.StringInput `pulumi:"internetIp"`
	// The configuration of Phase 2 negotiations.
	IpsecConfigs GetGatewayVpnAttachmentsAttachmentIpsecConfigArrayInput `pulumi:"ipsecConfigs"`
	// The CIDR block of the virtual private cloud (VPC).
	LocalSubnet pulumi.StringInput `pulumi:"localSubnet"`
	// The network type.
	NetworkType pulumi.StringInput `pulumi:"networkType"`
	// The CIDR block of the on-premises data center.
	RemoteSubnet pulumi.StringInput `pulumi:"remoteSubnet"`
	// The status of the resource.
	Status pulumi.StringInput `pulumi:"status"`
	// The name of the IPsec-VPN connection.
	VpnAttachmentName pulumi.StringInput `pulumi:"vpnAttachmentName"`
	// The first ID of the resource.
	VpnConnectionId pulumi.StringInput `pulumi:"vpnConnectionId"`
}

func (GetGatewayVpnAttachmentsAttachmentArgs) ElementType added in v3.28.0 

func (GetGatewayVpnAttachmentsAttachmentArgs) ElementType() reflect.Type

func (GetGatewayVpnAttachmentsAttachmentArgs) ToGetGatewayVpnAttachmentsAttachmentOutput added in v3.28.0 

func (i GetGatewayVpnAttachmentsAttachmentArgs) ToGetGatewayVpnAttachmentsAttachmentOutput() GetGatewayVpnAttachmentsAttachmentOutput

func (GetGatewayVpnAttachmentsAttachmentArgs) ToGetGatewayVpnAttachmentsAttachmentOutputWithContext added in v3.28.0 

func (i GetGatewayVpnAttachmentsAttachmentArgs) ToGetGatewayVpnAttachmentsAttachmentOutputWithContext(ctx context.Context) GetGatewayVpnAttachmentsAttachmentOutput

func (GetGatewayVpnAttachmentsAttachmentArgs) ToOutput added in v3.43.1 

func (i GetGatewayVpnAttachmentsAttachmentArgs) ToOutput(ctx context.Context) pulumix.Output[GetGatewayVpnAttachmentsAttachment]

type GetGatewayVpnAttachmentsAttachmentArray added in v3.28.0 

type GetGatewayVpnAttachmentsAttachmentArray []GetGatewayVpnAttachmentsAttachmentInput

func (GetGatewayVpnAttachmentsAttachmentArray) ElementType added in v3.28.0 

func (GetGatewayVpnAttachmentsAttachmentArray) ElementType() reflect.Type

func (GetGatewayVpnAttachmentsAttachmentArray) ToGetGatewayVpnAttachmentsAttachmentArrayOutput added in v3.28.0 

func (i GetGatewayVpnAttachmentsAttachmentArray) ToGetGatewayVpnAttachmentsAttachmentArrayOutput() GetGatewayVpnAttachmentsAttachmentArrayOutput

func (GetGatewayVpnAttachmentsAttachmentArray) ToGetGatewayVpnAttachmentsAttachmentArrayOutputWithContext added in v3.28.0 

func (i GetGatewayVpnAttachmentsAttachmentArray) ToGetGatewayVpnAttachmentsAttachmentArrayOutputWithContext(ctx context.Context) GetGatewayVpnAttachmentsAttachmentArrayOutput

func (GetGatewayVpnAttachmentsAttachmentArray) ToOutput added in v3.43.1 

func (i GetGatewayVpnAttachmentsAttachmentArray) ToOutput(ctx context.Context) pulumix.Output[[]GetGatewayVpnAttachmentsAttachment]

type GetGatewayVpnAttachmentsAttachmentArrayInput added in v3.28.0 

type GetGatewayVpnAttachmentsAttachmentArrayInput interface {
	pulumi.Input

	ToGetGatewayVpnAttachmentsAttachmentArrayOutput() GetGatewayVpnAttachmentsAttachmentArrayOutput
	ToGetGatewayVpnAttachmentsAttachmentArrayOutputWithContext(context.Context) GetGatewayVpnAttachmentsAttachmentArrayOutput
}

GetGatewayVpnAttachmentsAttachmentArrayInput is an input type that accepts GetGatewayVpnAttachmentsAttachmentArray and GetGatewayVpnAttachmentsAttachmentArrayOutput values. You can construct a concrete instance of `GetGatewayVpnAttachmentsAttachmentArrayInput` via: 

GetGatewayVpnAttachmentsAttachmentArray{ GetGatewayVpnAttachmentsAttachmentArgs{...} }

type GetGatewayVpnAttachmentsAttachmentArrayOutput added in v3.28.0 

type GetGatewayVpnAttachmentsAttachmentArrayOutput struct{ *pulumi.OutputState }

func (GetGatewayVpnAttachmentsAttachmentArrayOutput) ElementType added in v3.28.0 

func (GetGatewayVpnAttachmentsAttachmentArrayOutput) ElementType() reflect.Type

func (GetGatewayVpnAttachmentsAttachmentArrayOutput) Index added in v3.28.0 

func (o GetGatewayVpnAttachmentsAttachmentArrayOutput) Index(i pulumi.IntInput) GetGatewayVpnAttachmentsAttachmentOutput

func (GetGatewayVpnAttachmentsAttachmentArrayOutput) ToGetGatewayVpnAttachmentsAttachmentArrayOutput added in v3.28.0 

func (o GetGatewayVpnAttachmentsAttachmentArrayOutput) ToGetGatewayVpnAttachmentsAttachmentArrayOutput() GetGatewayVpnAttachmentsAttachmentArrayOutput

func (GetGatewayVpnAttachmentsAttachmentArrayOutput) ToGetGatewayVpnAttachmentsAttachmentArrayOutputWithContext added in v3.28.0 

func (o GetGatewayVpnAttachmentsAttachmentArrayOutput) ToGetGatewayVpnAttachmentsAttachmentArrayOutputWithContext(ctx context.Context) GetGatewayVpnAttachmentsAttachmentArrayOutput

func (GetGatewayVpnAttachmentsAttachmentArrayOutput) ToOutput added in v3.43.1 

func (o GetGatewayVpnAttachmentsAttachmentArrayOutput) ToOutput(ctx context.Context) pulumix.Output[[]GetGatewayVpnAttachmentsAttachment]

type GetGatewayVpnAttachmentsAttachmentBgpConfig added in v3.28.0 

type GetGatewayVpnAttachmentsAttachmentBgpConfig struct {
	// The ASN on the Alibaba Cloud side.
	LocalAsn string `pulumi:"localAsn"`
	// The BGP IP address on the Alibaba Cloud side.
	LocalBgpIp string `pulumi:"localBgpIp"`
	// The status of the resource.
	Status string `pulumi:"status"`
	// The CIDR block of the IPsec tunnel. The CIDR block belongs to 169.254.0.0/16. The mask of the CIDR block is 30 bits in length.
	TunnelCidr string `pulumi:"tunnelCidr"`
}

type GetGatewayVpnAttachmentsAttachmentBgpConfigArgs added in v3.28.0 

type GetGatewayVpnAttachmentsAttachmentBgpConfigArgs struct {
	// The ASN on the Alibaba Cloud side.
	LocalAsn pulumi.StringInput `pulumi:"localAsn"`
	// The BGP IP address on the Alibaba Cloud side.
	LocalBgpIp pulumi.StringInput `pulumi:"localBgpIp"`
	// The status of the resource.
	Status pulumi.StringInput `pulumi:"status"`
	// The CIDR block of the IPsec tunnel. The CIDR block belongs to 169.254.0.0/16. The mask of the CIDR block is 30 bits in length.
	TunnelCidr pulumi.StringInput `pulumi:"tunnelCidr"`
}

func (GetGatewayVpnAttachmentsAttachmentBgpConfigArgs) ElementType added in v3.28.0 

func (GetGatewayVpnAttachmentsAttachmentBgpConfigArgs) ElementType() reflect.Type

func (GetGatewayVpnAttachmentsAttachmentBgpConfigArgs) ToGetGatewayVpnAttachmentsAttachmentBgpConfigOutput added in v3.28.0 

func (i GetGatewayVpnAttachmentsAttachmentBgpConfigArgs) ToGetGatewayVpnAttachmentsAttachmentBgpConfigOutput() GetGatewayVpnAttachmentsAttachmentBgpConfigOutput

func (GetGatewayVpnAttachmentsAttachmentBgpConfigArgs) ToGetGatewayVpnAttachmentsAttachmentBgpConfigOutputWithContext added in v3.28.0 

func (i GetGatewayVpnAttachmentsAttachmentBgpConfigArgs) ToGetGatewayVpnAttachmentsAttachmentBgpConfigOutputWithContext(ctx context.Context) GetGatewayVpnAttachmentsAttachmentBgpConfigOutput

func (GetGatewayVpnAttachmentsAttachmentBgpConfigArgs) ToOutput added in v3.43.1 

func (i GetGatewayVpnAttachmentsAttachmentBgpConfigArgs) ToOutput(ctx context.Context) pulumix.Output[GetGatewayVpnAttachmentsAttachmentBgpConfig]

type GetGatewayVpnAttachmentsAttachmentBgpConfigArray added in v3.28.0 

type GetGatewayVpnAttachmentsAttachmentBgpConfigArray []GetGatewayVpnAttachmentsAttachmentBgpConfigInput

func (GetGatewayVpnAttachmentsAttachmentBgpConfigArray) ElementType added in v3.28.0 

func (GetGatewayVpnAttachmentsAttachmentBgpConfigArray) ElementType() reflect.Type

func (GetGatewayVpnAttachmentsAttachmentBgpConfigArray) ToGetGatewayVpnAttachmentsAttachmentBgpConfigArrayOutput added in v3.28.0 

func (i GetGatewayVpnAttachmentsAttachmentBgpConfigArray) ToGetGatewayVpnAttachmentsAttachmentBgpConfigArrayOutput() GetGatewayVpnAttachmentsAttachmentBgpConfigArrayOutput

func (GetGatewayVpnAttachmentsAttachmentBgpConfigArray) ToGetGatewayVpnAttachmentsAttachmentBgpConfigArrayOutputWithContext added in v3.28.0 

func (i GetGatewayVpnAttachmentsAttachmentBgpConfigArray) ToGetGatewayVpnAttachmentsAttachmentBgpConfigArrayOutputWithContext(ctx context.Context) GetGatewayVpnAttachmentsAttachmentBgpConfigArrayOutput

func (GetGatewayVpnAttachmentsAttachmentBgpConfigArray) ToOutput added in v3.43.1 

func (i GetGatewayVpnAttachmentsAttachmentBgpConfigArray) ToOutput(ctx context.Context) pulumix.Output[[]GetGatewayVpnAttachmentsAttachmentBgpConfig]

type GetGatewayVpnAttachmentsAttachmentBgpConfigArrayInput added in v3.28.0 

type GetGatewayVpnAttachmentsAttachmentBgpConfigArrayInput interface {
	pulumi.Input

	ToGetGatewayVpnAttachmentsAttachmentBgpConfigArrayOutput() GetGatewayVpnAttachmentsAttachmentBgpConfigArrayOutput
	ToGetGatewayVpnAttachmentsAttachmentBgpConfigArrayOutputWithContext(context.Context) GetGatewayVpnAttachmentsAttachmentBgpConfigArrayOutput
}

GetGatewayVpnAttachmentsAttachmentBgpConfigArrayInput is an input type that accepts GetGatewayVpnAttachmentsAttachmentBgpConfigArray and GetGatewayVpnAttachmentsAttachmentBgpConfigArrayOutput values. You can construct a concrete instance of `GetGatewayVpnAttachmentsAttachmentBgpConfigArrayInput` via: 

GetGatewayVpnAttachmentsAttachmentBgpConfigArray{ GetGatewayVpnAttachmentsAttachmentBgpConfigArgs{...} }

type GetGatewayVpnAttachmentsAttachmentBgpConfigArrayOutput added in v3.28.0 

type GetGatewayVpnAttachmentsAttachmentBgpConfigArrayOutput struct{ *pulumi.OutputState }

func (GetGatewayVpnAttachmentsAttachmentBgpConfigArrayOutput) ElementType added in v3.28.0 

func (GetGatewayVpnAttachmentsAttachmentBgpConfigArrayOutput) ElementType() reflect.Type

func (GetGatewayVpnAttachmentsAttachmentBgpConfigArrayOutput) Index added in v3.28.0 

func (o GetGatewayVpnAttachmentsAttachmentBgpConfigArrayOutput) Index(i pulumi.IntInput) GetGatewayVpnAttachmentsAttachmentBgpConfigOutput

func (GetGatewayVpnAttachmentsAttachmentBgpConfigArrayOutput) ToGetGatewayVpnAttachmentsAttachmentBgpConfigArrayOutput added in v3.28.0 

func (o GetGatewayVpnAttachmentsAttachmentBgpConfigArrayOutput) ToGetGatewayVpnAttachmentsAttachmentBgpConfigArrayOutput() GetGatewayVpnAttachmentsAttachmentBgpConfigArrayOutput

func (GetGatewayVpnAttachmentsAttachmentBgpConfigArrayOutput) ToGetGatewayVpnAttachmentsAttachmentBgpConfigArrayOutputWithContext added in v3.28.0 

func (o GetGatewayVpnAttachmentsAttachmentBgpConfigArrayOutput) ToGetGatewayVpnAttachmentsAttachmentBgpConfigArrayOutputWithContext(ctx context.Context) GetGatewayVpnAttachmentsAttachmentBgpConfigArrayOutput

func (GetGatewayVpnAttachmentsAttachmentBgpConfigArrayOutput) ToOutput added in v3.43.1 

func (o GetGatewayVpnAttachmentsAttachmentBgpConfigArrayOutput) ToOutput(ctx context.Context) pulumix.Output[[]GetGatewayVpnAttachmentsAttachmentBgpConfig]

type GetGatewayVpnAttachmentsAttachmentBgpConfigInput added in v3.28.0 

type GetGatewayVpnAttachmentsAttachmentBgpConfigInput interface {
	pulumi.Input

	ToGetGatewayVpnAttachmentsAttachmentBgpConfigOutput() GetGatewayVpnAttachmentsAttachmentBgpConfigOutput
	ToGetGatewayVpnAttachmentsAttachmentBgpConfigOutputWithContext(context.Context) GetGatewayVpnAttachmentsAttachmentBgpConfigOutput
}

GetGatewayVpnAttachmentsAttachmentBgpConfigInput is an input type that accepts GetGatewayVpnAttachmentsAttachmentBgpConfigArgs and GetGatewayVpnAttachmentsAttachmentBgpConfigOutput values. You can construct a concrete instance of `GetGatewayVpnAttachmentsAttachmentBgpConfigInput` via: 

GetGatewayVpnAttachmentsAttachmentBgpConfigArgs{...}

type GetGatewayVpnAttachmentsAttachmentBgpConfigOutput added in v3.28.0 

type GetGatewayVpnAttachmentsAttachmentBgpConfigOutput struct{ *pulumi.OutputState }

func (GetGatewayVpnAttachmentsAttachmentBgpConfigOutput) ElementType added in v3.28.0 

func (GetGatewayVpnAttachmentsAttachmentBgpConfigOutput) ElementType() reflect.Type

func (GetGatewayVpnAttachmentsAttachmentBgpConfigOutput) LocalAsn added in v3.28.0 

func (o GetGatewayVpnAttachmentsAttachmentBgpConfigOutput) LocalAsn() pulumi.StringOutput

The ASN on the Alibaba Cloud side.

func (GetGatewayVpnAttachmentsAttachmentBgpConfigOutput) LocalBgpIp added in v3.28.0 

func (o GetGatewayVpnAttachmentsAttachmentBgpConfigOutput) LocalBgpIp() pulumi.StringOutput

The BGP IP address on the Alibaba Cloud side.

func (GetGatewayVpnAttachmentsAttachmentBgpConfigOutput) Status added in v3.28.0 

func (o GetGatewayVpnAttachmentsAttachmentBgpConfigOutput) Status() pulumi.StringOutput

The status of the resource.

func (GetGatewayVpnAttachmentsAttachmentBgpConfigOutput) ToGetGatewayVpnAttachmentsAttachmentBgpConfigOutput added in v3.28.0 

func (o GetGatewayVpnAttachmentsAttachmentBgpConfigOutput) ToGetGatewayVpnAttachmentsAttachmentBgpConfigOutput() GetGatewayVpnAttachmentsAttachmentBgpConfigOutput

func (GetGatewayVpnAttachmentsAttachmentBgpConfigOutput) ToGetGatewayVpnAttachmentsAttachmentBgpConfigOutputWithContext added in v3.28.0 

func (o GetGatewayVpnAttachmentsAttachmentBgpConfigOutput) ToGetGatewayVpnAttachmentsAttachmentBgpConfigOutputWithContext(ctx context.Context) GetGatewayVpnAttachmentsAttachmentBgpConfigOutput

func (GetGatewayVpnAttachmentsAttachmentBgpConfigOutput) ToOutput added in v3.43.1 

func (o GetGatewayVpnAttachmentsAttachmentBgpConfigOutput) ToOutput(ctx context.Context) pulumix.Output[GetGatewayVpnAttachmentsAttachmentBgpConfig]

func (GetGatewayVpnAttachmentsAttachmentBgpConfigOutput) TunnelCidr added in v3.28.0 

func (o GetGatewayVpnAttachmentsAttachmentBgpConfigOutput) TunnelCidr() pulumi.StringOutput

The CIDR block of the IPsec tunnel. The CIDR block belongs to 169.254.0.0/16. The mask of the CIDR block is 30 bits in length.

type GetGatewayVpnAttachmentsAttachmentHealthCheckConfig added in v3.28.0 

type GetGatewayVpnAttachmentsAttachmentHealthCheckConfig struct {
	// The destination IP address.
	Dip string `pulumi:"dip"`
	// Specifies whether to enable health checks.
	Enable bool `pulumi:"enable"`
	// The interval between two consecutive health checks. Unit: seconds.
	Interval int `pulumi:"interval"`
	// Whether to revoke the published route when the health check fails.
	Policy string `pulumi:"policy"`
	// The maximum number of health check retries.
	Retry int `pulumi:"retry"`
	// The source IP address.
	Sip string `pulumi:"sip"`
	// The status of the resource.
	Status string `pulumi:"status"`
}

type GetGatewayVpnAttachmentsAttachmentHealthCheckConfigArgs added in v3.28.0 

type GetGatewayVpnAttachmentsAttachmentHealthCheckConfigArgs struct {
	// The destination IP address.
	Dip pulumi.StringInput `pulumi:"dip"`
	// Specifies whether to enable health checks.
	Enable pulumi.BoolInput `pulumi:"enable"`
	// The interval between two consecutive health checks. Unit: seconds.
	Interval pulumi.IntInput `pulumi:"interval"`
	// Whether to revoke the published route when the health check fails.
	Policy pulumi.StringInput `pulumi:"policy"`
	// The maximum number of health check retries.
	Retry pulumi.IntInput `pulumi:"retry"`
	// The source IP address.
	Sip pulumi.StringInput `pulumi:"sip"`
	// The status of the resource.
	Status pulumi.StringInput `pulumi:"status"`
}

func (GetGatewayVpnAttachmentsAttachmentHealthCheckConfigArgs) ElementType added in v3.28.0 

func (GetGatewayVpnAttachmentsAttachmentHealthCheckConfigArgs) ElementType() reflect.Type

func (GetGatewayVpnAttachmentsAttachmentHealthCheckConfigArgs) ToGetGatewayVpnAttachmentsAttachmentHealthCheckConfigOutput added in v3.28.0 

func (i GetGatewayVpnAttachmentsAttachmentHealthCheckConfigArgs) ToGetGatewayVpnAttachmentsAttachmentHealthCheckConfigOutput() GetGatewayVpnAttachmentsAttachmentHealthCheckConfigOutput

func (GetGatewayVpnAttachmentsAttachmentHealthCheckConfigArgs) ToGetGatewayVpnAttachmentsAttachmentHealthCheckConfigOutputWithContext added in v3.28.0 

func (i GetGatewayVpnAttachmentsAttachmentHealthCheckConfigArgs) ToGetGatewayVpnAttachmentsAttachmentHealthCheckConfigOutputWithContext(ctx context.Context) GetGatewayVpnAttachmentsAttachmentHealthCheckConfigOutput

func (GetGatewayVpnAttachmentsAttachmentHealthCheckConfigArgs) ToOutput added in v3.43.1 

func (i GetGatewayVpnAttachmentsAttachmentHealthCheckConfigArgs) ToOutput(ctx context.Context) pulumix.Output[GetGatewayVpnAttachmentsAttachmentHealthCheckConfig]

type GetGatewayVpnAttachmentsAttachmentHealthCheckConfigArray added in v3.28.0 

type GetGatewayVpnAttachmentsAttachmentHealthCheckConfigArray []GetGatewayVpnAttachmentsAttachmentHealthCheckConfigInput

func (GetGatewayVpnAttachmentsAttachmentHealthCheckConfigArray) ElementType added in v3.28.0 

func (GetGatewayVpnAttachmentsAttachmentHealthCheckConfigArray) ElementType() reflect.Type

func (GetGatewayVpnAttachmentsAttachmentHealthCheckConfigArray) ToGetGatewayVpnAttachmentsAttachmentHealthCheckConfigArrayOutput added in v3.28.0 

func (i GetGatewayVpnAttachmentsAttachmentHealthCheckConfigArray) ToGetGatewayVpnAttachmentsAttachmentHealthCheckConfigArrayOutput() GetGatewayVpnAttachmentsAttachmentHealthCheckConfigArrayOutput

func (GetGatewayVpnAttachmentsAttachmentHealthCheckConfigArray) ToGetGatewayVpnAttachmentsAttachmentHealthCheckConfigArrayOutputWithContext added in v3.28.0 

func (i GetGatewayVpnAttachmentsAttachmentHealthCheckConfigArray) ToGetGatewayVpnAttachmentsAttachmentHealthCheckConfigArrayOutputWithContext(ctx context.Context) GetGatewayVpnAttachmentsAttachmentHealthCheckConfigArrayOutput

func (GetGatewayVpnAttachmentsAttachmentHealthCheckConfigArray) ToOutput added in v3.43.1 

func (i GetGatewayVpnAttachmentsAttachmentHealthCheckConfigArray) ToOutput(ctx context.Context) pulumix.Output[[]GetGatewayVpnAttachmentsAttachmentHealthCheckConfig]

type GetGatewayVpnAttachmentsAttachmentHealthCheckConfigArrayInput added in v3.28.0 

type GetGatewayVpnAttachmentsAttachmentHealthCheckConfigArrayInput interface {
	pulumi.Input

	ToGetGatewayVpnAttachmentsAttachmentHealthCheckConfigArrayOutput() GetGatewayVpnAttachmentsAttachmentHealthCheckConfigArrayOutput
	ToGetGatewayVpnAttachmentsAttachmentHealthCheckConfigArrayOutputWithContext(context.Context) GetGatewayVpnAttachmentsAttachmentHealthCheckConfigArrayOutput
}

GetGatewayVpnAttachmentsAttachmentHealthCheckConfigArrayInput is an input type that accepts GetGatewayVpnAttachmentsAttachmentHealthCheckConfigArray and GetGatewayVpnAttachmentsAttachmentHealthCheckConfigArrayOutput values. You can construct a concrete instance of `GetGatewayVpnAttachmentsAttachmentHealthCheckConfigArrayInput` via: 

GetGatewayVpnAttachmentsAttachmentHealthCheckConfigArray{ GetGatewayVpnAttachmentsAttachmentHealthCheckConfigArgs{...} }

type GetGatewayVpnAttachmentsAttachmentHealthCheckConfigArrayOutput added in v3.28.0 

type GetGatewayVpnAttachmentsAttachmentHealthCheckConfigArrayOutput struct{ *pulumi.OutputState }

func (GetGatewayVpnAttachmentsAttachmentHealthCheckConfigArrayOutput) ElementType added in v3.28.0 

func (GetGatewayVpnAttachmentsAttachmentHealthCheckConfigArrayOutput) ElementType() reflect.Type

func (GetGatewayVpnAttachmentsAttachmentHealthCheckConfigArrayOutput) Index added in v3.28.0 

func (o GetGatewayVpnAttachmentsAttachmentHealthCheckConfigArrayOutput) Index(i pulumi.IntInput) GetGatewayVpnAttachmentsAttachmentHealthCheckConfigOutput

func (GetGatewayVpnAttachmentsAttachmentHealthCheckConfigArrayOutput) ToGetGatewayVpnAttachmentsAttachmentHealthCheckConfigArrayOutput added in v3.28.0 

func (o GetGatewayVpnAttachmentsAttachmentHealthCheckConfigArrayOutput) ToGetGatewayVpnAttachmentsAttachmentHealthCheckConfigArrayOutput() GetGatewayVpnAttachmentsAttachmentHealthCheckConfigArrayOutput

func (GetGatewayVpnAttachmentsAttachmentHealthCheckConfigArrayOutput) ToGetGatewayVpnAttachmentsAttachmentHealthCheckConfigArrayOutputWithContext added in v3.28.0 

func (o GetGatewayVpnAttachmentsAttachmentHealthCheckConfigArrayOutput) ToGetGatewayVpnAttachmentsAttachmentHealthCheckConfigArrayOutputWithContext(ctx context.Context) GetGatewayVpnAttachmentsAttachmentHealthCheckConfigArrayOutput

func (GetGatewayVpnAttachmentsAttachmentHealthCheckConfigArrayOutput) ToOutput added in v3.43.1 

func (o GetGatewayVpnAttachmentsAttachmentHealthCheckConfigArrayOutput) ToOutput(ctx context.Context) pulumix.Output[[]GetGatewayVpnAttachmentsAttachmentHealthCheckConfig]

type GetGatewayVpnAttachmentsAttachmentHealthCheckConfigInput added in v3.28.0 

type GetGatewayVpnAttachmentsAttachmentHealthCheckConfigInput interface {
	pulumi.Input

	ToGetGatewayVpnAttachmentsAttachmentHealthCheckConfigOutput() GetGatewayVpnAttachmentsAttachmentHealthCheckConfigOutput
	ToGetGatewayVpnAttachmentsAttachmentHealthCheckConfigOutputWithContext(context.Context) GetGatewayVpnAttachmentsAttachmentHealthCheckConfigOutput
}

GetGatewayVpnAttachmentsAttachmentHealthCheckConfigInput is an input type that accepts GetGatewayVpnAttachmentsAttachmentHealthCheckConfigArgs and GetGatewayVpnAttachmentsAttachmentHealthCheckConfigOutput values. You can construct a concrete instance of `GetGatewayVpnAttachmentsAttachmentHealthCheckConfigInput` via: 

GetGatewayVpnAttachmentsAttachmentHealthCheckConfigArgs{...}

type GetGatewayVpnAttachmentsAttachmentHealthCheckConfigOutput added in v3.28.0 

type GetGatewayVpnAttachmentsAttachmentHealthCheckConfigOutput struct{ *pulumi.OutputState }

func (GetGatewayVpnAttachmentsAttachmentHealthCheckConfigOutput) Dip added in v3.28.0 

func (o GetGatewayVpnAttachmentsAttachmentHealthCheckConfigOutput) Dip() pulumi.StringOutput

The destination IP address.

func (GetGatewayVpnAttachmentsAttachmentHealthCheckConfigOutput) ElementType added in v3.28.0 

func (GetGatewayVpnAttachmentsAttachmentHealthCheckConfigOutput) ElementType() reflect.Type

func (GetGatewayVpnAttachmentsAttachmentHealthCheckConfigOutput) Enable added in v3.28.0 

func (o GetGatewayVpnAttachmentsAttachmentHealthCheckConfigOutput) Enable() pulumi.BoolOutput

Specifies whether to enable health checks.

func (GetGatewayVpnAttachmentsAttachmentHealthCheckConfigOutput) Interval added in v3.28.0 

func (o GetGatewayVpnAttachmentsAttachmentHealthCheckConfigOutput) Interval() pulumi.IntOutput

The interval between two consecutive health checks. Unit: seconds.

func (GetGatewayVpnAttachmentsAttachmentHealthCheckConfigOutput) Policy added in v3.28.0 

func (o GetGatewayVpnAttachmentsAttachmentHealthCheckConfigOutput) Policy() pulumi.StringOutput

Whether to revoke the published route when the health check fails.

func (GetGatewayVpnAttachmentsAttachmentHealthCheckConfigOutput) Retry added in v3.28.0 

func (o GetGatewayVpnAttachmentsAttachmentHealthCheckConfigOutput) Retry() pulumi.IntOutput

The maximum number of health check retries.

func (GetGatewayVpnAttachmentsAttachmentHealthCheckConfigOutput) Sip added in v3.28.0 

func (o GetGatewayVpnAttachmentsAttachmentHealthCheckConfigOutput) Sip() pulumi.StringOutput

The source IP address.

func (GetGatewayVpnAttachmentsAttachmentHealthCheckConfigOutput) Status added in v3.28.0 

func (o GetGatewayVpnAttachmentsAttachmentHealthCheckConfigOutput) Status() pulumi.StringOutput

The status of the resource.

func (GetGatewayVpnAttachmentsAttachmentHealthCheckConfigOutput) ToGetGatewayVpnAttachmentsAttachmentHealthCheckConfigOutput added in v3.28.0 

func (o GetGatewayVpnAttachmentsAttachmentHealthCheckConfigOutput) ToGetGatewayVpnAttachmentsAttachmentHealthCheckConfigOutput() GetGatewayVpnAttachmentsAttachmentHealthCheckConfigOutput

func (GetGatewayVpnAttachmentsAttachmentHealthCheckConfigOutput) ToGetGatewayVpnAttachmentsAttachmentHealthCheckConfigOutputWithContext added in v3.28.0 

func (o GetGatewayVpnAttachmentsAttachmentHealthCheckConfigOutput) ToGetGatewayVpnAttachmentsAttachmentHealthCheckConfigOutputWithContext(ctx context.Context) GetGatewayVpnAttachmentsAttachmentHealthCheckConfigOutput

func (GetGatewayVpnAttachmentsAttachmentHealthCheckConfigOutput) ToOutput added in v3.43.1 

func (o GetGatewayVpnAttachmentsAttachmentHealthCheckConfigOutput) ToOutput(ctx context.Context) pulumix.Output[GetGatewayVpnAttachmentsAttachmentHealthCheckConfig]

type GetGatewayVpnAttachmentsAttachmentIkeConfig added in v3.28.0 

type GetGatewayVpnAttachmentsAttachmentIkeConfig struct {
	// The IKE authentication algorithm.
	IkeAuthAlg string `pulumi:"ikeAuthAlg"`
	// The IKE encryption algorithm.
	IkeEncAlg string `pulumi:"ikeEncAlg"`
	// The IKE lifetime. Unit: seconds.
	IkeLifetime string `pulumi:"ikeLifetime"`
	// The IKE negotiation mode.
	IkeMode string `pulumi:"ikeMode"`
	// The DH group.
	IkePfs string `pulumi:"ikePfs"`
	// The version of the IKE protocol.
	IkeVersion string `pulumi:"ikeVersion"`
	// The local ID, which supports the FQDN and IP formats. The current VPN gateway IP address is selected by default. The cen.TransitRouterVpnAttachment resource will not have a value until after it is created.
	LocalId string `pulumi:"localId"`
	// The pre-shared key.
	Psk string `pulumi:"psk"`
	// The identifier of the peer. The default value is the IP address of the VPN gateway. The value can be a fully qualified domain name (FQDN) or an IP address.
	RemoteId string `pulumi:"remoteId"`
}

type GetGatewayVpnAttachmentsAttachmentIkeConfigArgs added in v3.28.0 

type GetGatewayVpnAttachmentsAttachmentIkeConfigArgs struct {
	// The IKE authentication algorithm.
	IkeAuthAlg pulumi.StringInput `pulumi:"ikeAuthAlg"`
	// The IKE encryption algorithm.
	IkeEncAlg pulumi.StringInput `pulumi:"ikeEncAlg"`
	// The IKE lifetime. Unit: seconds.
	IkeLifetime pulumi.StringInput `pulumi:"ikeLifetime"`
	// The IKE negotiation mode.
	IkeMode pulumi.StringInput `pulumi:"ikeMode"`
	// The DH group.
	IkePfs pulumi.StringInput `pulumi:"ikePfs"`
	// The version of the IKE protocol.
	IkeVersion pulumi.StringInput `pulumi:"ikeVersion"`
	// The local ID, which supports the FQDN and IP formats. The current VPN gateway IP address is selected by default. The cen.TransitRouterVpnAttachment resource will not have a value until after it is created.
	LocalId pulumi.StringInput `pulumi:"localId"`
	// The pre-shared key.
	Psk pulumi.StringInput `pulumi:"psk"`
	// The identifier of the peer. The default value is the IP address of the VPN gateway. The value can be a fully qualified domain name (FQDN) or an IP address.
	RemoteId pulumi.StringInput `pulumi:"remoteId"`
}

func (GetGatewayVpnAttachmentsAttachmentIkeConfigArgs) ElementType added in v3.28.0 

func (GetGatewayVpnAttachmentsAttachmentIkeConfigArgs) ElementType() reflect.Type

func (GetGatewayVpnAttachmentsAttachmentIkeConfigArgs) ToGetGatewayVpnAttachmentsAttachmentIkeConfigOutput added in v3.28.0 

func (i GetGatewayVpnAttachmentsAttachmentIkeConfigArgs) ToGetGatewayVpnAttachmentsAttachmentIkeConfigOutput() GetGatewayVpnAttachmentsAttachmentIkeConfigOutput

func (GetGatewayVpnAttachmentsAttachmentIkeConfigArgs) ToGetGatewayVpnAttachmentsAttachmentIkeConfigOutputWithContext added in v3.28.0 

func (i GetGatewayVpnAttachmentsAttachmentIkeConfigArgs) ToGetGatewayVpnAttachmentsAttachmentIkeConfigOutputWithContext(ctx context.Context) GetGatewayVpnAttachmentsAttachmentIkeConfigOutput

func (GetGatewayVpnAttachmentsAttachmentIkeConfigArgs) ToOutput added in v3.43.1 

func (i GetGatewayVpnAttachmentsAttachmentIkeConfigArgs) ToOutput(ctx context.Context) pulumix.Output[GetGatewayVpnAttachmentsAttachmentIkeConfig]

type GetGatewayVpnAttachmentsAttachmentIkeConfigArray added in v3.28.0 

type GetGatewayVpnAttachmentsAttachmentIkeConfigArray []GetGatewayVpnAttachmentsAttachmentIkeConfigInput

func (GetGatewayVpnAttachmentsAttachmentIkeConfigArray) ElementType added in v3.28.0 

func (GetGatewayVpnAttachmentsAttachmentIkeConfigArray) ElementType() reflect.Type

func (GetGatewayVpnAttachmentsAttachmentIkeConfigArray) ToGetGatewayVpnAttachmentsAttachmentIkeConfigArrayOutput added in v3.28.0 

func (i GetGatewayVpnAttachmentsAttachmentIkeConfigArray) ToGetGatewayVpnAttachmentsAttachmentIkeConfigArrayOutput() GetGatewayVpnAttachmentsAttachmentIkeConfigArrayOutput

func (GetGatewayVpnAttachmentsAttachmentIkeConfigArray) ToGetGatewayVpnAttachmentsAttachmentIkeConfigArrayOutputWithContext added in v3.28.0 

func (i GetGatewayVpnAttachmentsAttachmentIkeConfigArray) ToGetGatewayVpnAttachmentsAttachmentIkeConfigArrayOutputWithContext(ctx context.Context) GetGatewayVpnAttachmentsAttachmentIkeConfigArrayOutput

func (GetGatewayVpnAttachmentsAttachmentIkeConfigArray) ToOutput added in v3.43.1 

func (i GetGatewayVpnAttachmentsAttachmentIkeConfigArray) ToOutput(ctx context.Context) pulumix.Output[[]GetGatewayVpnAttachmentsAttachmentIkeConfig]

type GetGatewayVpnAttachmentsAttachmentIkeConfigArrayInput added in v3.28.0 

type GetGatewayVpnAttachmentsAttachmentIkeConfigArrayInput interface {
	pulumi.Input

	ToGetGatewayVpnAttachmentsAttachmentIkeConfigArrayOutput() GetGatewayVpnAttachmentsAttachmentIkeConfigArrayOutput
	ToGetGatewayVpnAttachmentsAttachmentIkeConfigArrayOutputWithContext(context.Context) GetGatewayVpnAttachmentsAttachmentIkeConfigArrayOutput
}

GetGatewayVpnAttachmentsAttachmentIkeConfigArrayInput is an input type that accepts GetGatewayVpnAttachmentsAttachmentIkeConfigArray and GetGatewayVpnAttachmentsAttachmentIkeConfigArrayOutput values. You can construct a concrete instance of `GetGatewayVpnAttachmentsAttachmentIkeConfigArrayInput` via: 

GetGatewayVpnAttachmentsAttachmentIkeConfigArray{ GetGatewayVpnAttachmentsAttachmentIkeConfigArgs{...} }

type GetGatewayVpnAttachmentsAttachmentIkeConfigArrayOutput added in v3.28.0 

type GetGatewayVpnAttachmentsAttachmentIkeConfigArrayOutput struct{ *pulumi.OutputState }

func (GetGatewayVpnAttachmentsAttachmentIkeConfigArrayOutput) ElementType added in v3.28.0 

func (GetGatewayVpnAttachmentsAttachmentIkeConfigArrayOutput) ElementType() reflect.Type

func (GetGatewayVpnAttachmentsAttachmentIkeConfigArrayOutput) Index added in v3.28.0 

func (o GetGatewayVpnAttachmentsAttachmentIkeConfigArrayOutput) Index(i pulumi.IntInput) GetGatewayVpnAttachmentsAttachmentIkeConfigOutput

func (GetGatewayVpnAttachmentsAttachmentIkeConfigArrayOutput) ToGetGatewayVpnAttachmentsAttachmentIkeConfigArrayOutput added in v3.28.0 

func (o GetGatewayVpnAttachmentsAttachmentIkeConfigArrayOutput) ToGetGatewayVpnAttachmentsAttachmentIkeConfigArrayOutput() GetGatewayVpnAttachmentsAttachmentIkeConfigArrayOutput

func (GetGatewayVpnAttachmentsAttachmentIkeConfigArrayOutput) ToGetGatewayVpnAttachmentsAttachmentIkeConfigArrayOutputWithContext added in v3.28.0 

func (o GetGatewayVpnAttachmentsAttachmentIkeConfigArrayOutput) ToGetGatewayVpnAttachmentsAttachmentIkeConfigArrayOutputWithContext(ctx context.Context) GetGatewayVpnAttachmentsAttachmentIkeConfigArrayOutput

func (GetGatewayVpnAttachmentsAttachmentIkeConfigArrayOutput) ToOutput added in v3.43.1 

func (o GetGatewayVpnAttachmentsAttachmentIkeConfigArrayOutput) ToOutput(ctx context.Context) pulumix.Output[[]GetGatewayVpnAttachmentsAttachmentIkeConfig]

type GetGatewayVpnAttachmentsAttachmentIkeConfigInput added in v3.28.0 

type GetGatewayVpnAttachmentsAttachmentIkeConfigInput interface {
	pulumi.Input

	ToGetGatewayVpnAttachmentsAttachmentIkeConfigOutput() GetGatewayVpnAttachmentsAttachmentIkeConfigOutput
	ToGetGatewayVpnAttachmentsAttachmentIkeConfigOutputWithContext(context.Context) GetGatewayVpnAttachmentsAttachmentIkeConfigOutput
}

GetGatewayVpnAttachmentsAttachmentIkeConfigInput is an input type that accepts GetGatewayVpnAttachmentsAttachmentIkeConfigArgs and GetGatewayVpnAttachmentsAttachmentIkeConfigOutput values. You can construct a concrete instance of `GetGatewayVpnAttachmentsAttachmentIkeConfigInput` via: 

GetGatewayVpnAttachmentsAttachmentIkeConfigArgs{...}

type GetGatewayVpnAttachmentsAttachmentIkeConfigOutput added in v3.28.0 

type GetGatewayVpnAttachmentsAttachmentIkeConfigOutput struct{ *pulumi.OutputState }

func (GetGatewayVpnAttachmentsAttachmentIkeConfigOutput) ElementType added in v3.28.0 

func (GetGatewayVpnAttachmentsAttachmentIkeConfigOutput) ElementType() reflect.Type

func (GetGatewayVpnAttachmentsAttachmentIkeConfigOutput) IkeAuthAlg added in v3.28.0 

func (o GetGatewayVpnAttachmentsAttachmentIkeConfigOutput) IkeAuthAlg() pulumi.StringOutput

The IKE authentication algorithm.

func (GetGatewayVpnAttachmentsAttachmentIkeConfigOutput) IkeEncAlg added in v3.28.0 

func (o GetGatewayVpnAttachmentsAttachmentIkeConfigOutput) IkeEncAlg() pulumi.StringOutput

The IKE encryption algorithm.

func (GetGatewayVpnAttachmentsAttachmentIkeConfigOutput) IkeLifetime added in v3.28.0 

func (o GetGatewayVpnAttachmentsAttachmentIkeConfigOutput) IkeLifetime() pulumi.StringOutput

The IKE lifetime. Unit: seconds.

func (GetGatewayVpnAttachmentsAttachmentIkeConfigOutput) IkeMode added in v3.28.0 

func (o GetGatewayVpnAttachmentsAttachmentIkeConfigOutput) IkeMode() pulumi.StringOutput

The IKE negotiation mode.

func (GetGatewayVpnAttachmentsAttachmentIkeConfigOutput) IkePfs added in v3.28.0 

func (o GetGatewayVpnAttachmentsAttachmentIkeConfigOutput) IkePfs() pulumi.StringOutput

The DH group.

func (GetGatewayVpnAttachmentsAttachmentIkeConfigOutput) IkeVersion added in v3.28.0 

func (o GetGatewayVpnAttachmentsAttachmentIkeConfigOutput) IkeVersion() pulumi.StringOutput

The version of the IKE protocol.

func (GetGatewayVpnAttachmentsAttachmentIkeConfigOutput) LocalId added in v3.28.0 

func (o GetGatewayVpnAttachmentsAttachmentIkeConfigOutput) LocalId() pulumi.StringOutput

The local ID, which supports the FQDN and IP formats. The current VPN gateway IP address is selected by default. The cen.TransitRouterVpnAttachment resource will not have a value until after it is created.

func (GetGatewayVpnAttachmentsAttachmentIkeConfigOutput) Psk added in v3.28.0 

func (o GetGatewayVpnAttachmentsAttachmentIkeConfigOutput) Psk() pulumi.StringOutput

The pre-shared key.

func (GetGatewayVpnAttachmentsAttachmentIkeConfigOutput) RemoteId added in v3.28.0 

func (o GetGatewayVpnAttachmentsAttachmentIkeConfigOutput) RemoteId() pulumi.StringOutput

The identifier of the peer. The default value is the IP address of the VPN gateway. The value can be a fully qualified domain name (FQDN) or an IP address.

func (GetGatewayVpnAttachmentsAttachmentIkeConfigOutput) ToGetGatewayVpnAttachmentsAttachmentIkeConfigOutput added in v3.28.0 

func (o GetGatewayVpnAttachmentsAttachmentIkeConfigOutput) ToGetGatewayVpnAttachmentsAttachmentIkeConfigOutput() GetGatewayVpnAttachmentsAttachmentIkeConfigOutput

func (GetGatewayVpnAttachmentsAttachmentIkeConfigOutput) ToGetGatewayVpnAttachmentsAttachmentIkeConfigOutputWithContext added in v3.28.0 

func (o GetGatewayVpnAttachmentsAttachmentIkeConfigOutput) ToGetGatewayVpnAttachmentsAttachmentIkeConfigOutputWithContext(ctx context.Context) GetGatewayVpnAttachmentsAttachmentIkeConfigOutput

func (GetGatewayVpnAttachmentsAttachmentIkeConfigOutput) ToOutput added in v3.43.1 

func (o GetGatewayVpnAttachmentsAttachmentIkeConfigOutput) ToOutput(ctx context.Context) pulumix.Output[GetGatewayVpnAttachmentsAttachmentIkeConfig]

type GetGatewayVpnAttachmentsAttachmentInput added in v3.28.0 

type GetGatewayVpnAttachmentsAttachmentInput interface {
	pulumi.Input

	ToGetGatewayVpnAttachmentsAttachmentOutput() GetGatewayVpnAttachmentsAttachmentOutput
	ToGetGatewayVpnAttachmentsAttachmentOutputWithContext(context.Context) GetGatewayVpnAttachmentsAttachmentOutput
}

GetGatewayVpnAttachmentsAttachmentInput is an input type that accepts GetGatewayVpnAttachmentsAttachmentArgs and GetGatewayVpnAttachmentsAttachmentOutput values. You can construct a concrete instance of `GetGatewayVpnAttachmentsAttachmentInput` via: 

GetGatewayVpnAttachmentsAttachmentArgs{...}

type GetGatewayVpnAttachmentsAttachmentIpsecConfig added in v3.28.0 

type GetGatewayVpnAttachmentsAttachmentIpsecConfig struct {
	// The IPsec authentication algorithm.
	IpsecAuthAlg string `pulumi:"ipsecAuthAlg"`
	// The IPsec encryption algorithm.
	IpsecEncAlg string `pulumi:"ipsecEncAlg"`
	// The IPsec lifetime. Unit: seconds.
	IpsecLifetime string `pulumi:"ipsecLifetime"`
	// The DH group.
	IpsecPfs string `pulumi:"ipsecPfs"`
}

type GetGatewayVpnAttachmentsAttachmentIpsecConfigArgs added in v3.28.0 

type GetGatewayVpnAttachmentsAttachmentIpsecConfigArgs struct {
	// The IPsec authentication algorithm.
	IpsecAuthAlg pulumi.StringInput `pulumi:"ipsecAuthAlg"`
	// The IPsec encryption algorithm.
	IpsecEncAlg pulumi.StringInput `pulumi:"ipsecEncAlg"`
	// The IPsec lifetime. Unit: seconds.
	IpsecLifetime pulumi.StringInput `pulumi:"ipsecLifetime"`
	// The DH group.
	IpsecPfs pulumi.StringInput `pulumi:"ipsecPfs"`
}

func (GetGatewayVpnAttachmentsAttachmentIpsecConfigArgs) ElementType added in v3.28.0 

func (GetGatewayVpnAttachmentsAttachmentIpsecConfigArgs) ElementType() reflect.Type

func (GetGatewayVpnAttachmentsAttachmentIpsecConfigArgs) ToGetGatewayVpnAttachmentsAttachmentIpsecConfigOutput added in v3.28.0 

func (i GetGatewayVpnAttachmentsAttachmentIpsecConfigArgs) ToGetGatewayVpnAttachmentsAttachmentIpsecConfigOutput() GetGatewayVpnAttachmentsAttachmentIpsecConfigOutput

func (GetGatewayVpnAttachmentsAttachmentIpsecConfigArgs) ToGetGatewayVpnAttachmentsAttachmentIpsecConfigOutputWithContext added in v3.28.0 

func (i GetGatewayVpnAttachmentsAttachmentIpsecConfigArgs) ToGetGatewayVpnAttachmentsAttachmentIpsecConfigOutputWithContext(ctx context.Context) GetGatewayVpnAttachmentsAttachmentIpsecConfigOutput

func (GetGatewayVpnAttachmentsAttachmentIpsecConfigArgs) ToOutput added in v3.43.1 

func (i GetGatewayVpnAttachmentsAttachmentIpsecConfigArgs) ToOutput(ctx context.Context) pulumix.Output[GetGatewayVpnAttachmentsAttachmentIpsecConfig]

type GetGatewayVpnAttachmentsAttachmentIpsecConfigArray added in v3.28.0 

type GetGatewayVpnAttachmentsAttachmentIpsecConfigArray []GetGatewayVpnAttachmentsAttachmentIpsecConfigInput

func (GetGatewayVpnAttachmentsAttachmentIpsecConfigArray) ElementType added in v3.28.0 

func (GetGatewayVpnAttachmentsAttachmentIpsecConfigArray) ElementType() reflect.Type

func (GetGatewayVpnAttachmentsAttachmentIpsecConfigArray) ToGetGatewayVpnAttachmentsAttachmentIpsecConfigArrayOutput added in v3.28.0 

func (i GetGatewayVpnAttachmentsAttachmentIpsecConfigArray) ToGetGatewayVpnAttachmentsAttachmentIpsecConfigArrayOutput() GetGatewayVpnAttachmentsAttachmentIpsecConfigArrayOutput

func (GetGatewayVpnAttachmentsAttachmentIpsecConfigArray) ToGetGatewayVpnAttachmentsAttachmentIpsecConfigArrayOutputWithContext added in v3.28.0 

func (i GetGatewayVpnAttachmentsAttachmentIpsecConfigArray) ToGetGatewayVpnAttachmentsAttachmentIpsecConfigArrayOutputWithContext(ctx context.Context) GetGatewayVpnAttachmentsAttachmentIpsecConfigArrayOutput

func (GetGatewayVpnAttachmentsAttachmentIpsecConfigArray) ToOutput added in v3.43.1 

func (i GetGatewayVpnAttachmentsAttachmentIpsecConfigArray) ToOutput(ctx context.Context) pulumix.Output[[]GetGatewayVpnAttachmentsAttachmentIpsecConfig]

type GetGatewayVpnAttachmentsAttachmentIpsecConfigArrayInput added in v3.28.0 

type GetGatewayVpnAttachmentsAttachmentIpsecConfigArrayInput interface {
	pulumi.Input

	ToGetGatewayVpnAttachmentsAttachmentIpsecConfigArrayOutput() GetGatewayVpnAttachmentsAttachmentIpsecConfigArrayOutput
	ToGetGatewayVpnAttachmentsAttachmentIpsecConfigArrayOutputWithContext(context.Context) GetGatewayVpnAttachmentsAttachmentIpsecConfigArrayOutput
}

GetGatewayVpnAttachmentsAttachmentIpsecConfigArrayInput is an input type that accepts GetGatewayVpnAttachmentsAttachmentIpsecConfigArray and GetGatewayVpnAttachmentsAttachmentIpsecConfigArrayOutput values. You can construct a concrete instance of `GetGatewayVpnAttachmentsAttachmentIpsecConfigArrayInput` via: 

GetGatewayVpnAttachmentsAttachmentIpsecConfigArray{ GetGatewayVpnAttachmentsAttachmentIpsecConfigArgs{...} }

type GetGatewayVpnAttachmentsAttachmentIpsecConfigArrayOutput added in v3.28.0 

type GetGatewayVpnAttachmentsAttachmentIpsecConfigArrayOutput struct{ *pulumi.OutputState }

func (GetGatewayVpnAttachmentsAttachmentIpsecConfigArrayOutput) ElementType added in v3.28.0 

func (GetGatewayVpnAttachmentsAttachmentIpsecConfigArrayOutput) ElementType() reflect.Type

func (GetGatewayVpnAttachmentsAttachmentIpsecConfigArrayOutput) Index added in v3.28.0 

func (o GetGatewayVpnAttachmentsAttachmentIpsecConfigArrayOutput) Index(i pulumi.IntInput) GetGatewayVpnAttachmentsAttachmentIpsecConfigOutput

func (GetGatewayVpnAttachmentsAttachmentIpsecConfigArrayOutput) ToGetGatewayVpnAttachmentsAttachmentIpsecConfigArrayOutput added in v3.28.0 

func (o GetGatewayVpnAttachmentsAttachmentIpsecConfigArrayOutput) ToGetGatewayVpnAttachmentsAttachmentIpsecConfigArrayOutput() GetGatewayVpnAttachmentsAttachmentIpsecConfigArrayOutput

func (GetGatewayVpnAttachmentsAttachmentIpsecConfigArrayOutput) ToGetGatewayVpnAttachmentsAttachmentIpsecConfigArrayOutputWithContext added in v3.28.0 

func (o GetGatewayVpnAttachmentsAttachmentIpsecConfigArrayOutput) ToGetGatewayVpnAttachmentsAttachmentIpsecConfigArrayOutputWithContext(ctx context.Context) GetGatewayVpnAttachmentsAttachmentIpsecConfigArrayOutput

func (GetGatewayVpnAttachmentsAttachmentIpsecConfigArrayOutput) ToOutput added in v3.43.1 

func (o GetGatewayVpnAttachmentsAttachmentIpsecConfigArrayOutput) ToOutput(ctx context.Context) pulumix.Output[[]GetGatewayVpnAttachmentsAttachmentIpsecConfig]

type GetGatewayVpnAttachmentsAttachmentIpsecConfigInput added in v3.28.0 

type GetGatewayVpnAttachmentsAttachmentIpsecConfigInput interface {
	pulumi.Input

	ToGetGatewayVpnAttachmentsAttachmentIpsecConfigOutput() GetGatewayVpnAttachmentsAttachmentIpsecConfigOutput
	ToGetGatewayVpnAttachmentsAttachmentIpsecConfigOutputWithContext(context.Context) GetGatewayVpnAttachmentsAttachmentIpsecConfigOutput
}

GetGatewayVpnAttachmentsAttachmentIpsecConfigInput is an input type that accepts GetGatewayVpnAttachmentsAttachmentIpsecConfigArgs and GetGatewayVpnAttachmentsAttachmentIpsecConfigOutput values. You can construct a concrete instance of `GetGatewayVpnAttachmentsAttachmentIpsecConfigInput` via: 

GetGatewayVpnAttachmentsAttachmentIpsecConfigArgs{...}

type GetGatewayVpnAttachmentsAttachmentIpsecConfigOutput added in v3.28.0 

type GetGatewayVpnAttachmentsAttachmentIpsecConfigOutput struct{ *pulumi.OutputState }

func (GetGatewayVpnAttachmentsAttachmentIpsecConfigOutput) ElementType added in v3.28.0 

func (GetGatewayVpnAttachmentsAttachmentIpsecConfigOutput) ElementType() reflect.Type

func (GetGatewayVpnAttachmentsAttachmentIpsecConfigOutput) IpsecAuthAlg added in v3.28.0 

func (o GetGatewayVpnAttachmentsAttachmentIpsecConfigOutput) IpsecAuthAlg() pulumi.StringOutput

The IPsec authentication algorithm.

func (GetGatewayVpnAttachmentsAttachmentIpsecConfigOutput) IpsecEncAlg added in v3.28.0 

func (o GetGatewayVpnAttachmentsAttachmentIpsecConfigOutput) IpsecEncAlg() pulumi.StringOutput

The IPsec encryption algorithm.

func (GetGatewayVpnAttachmentsAttachmentIpsecConfigOutput) IpsecLifetime added in v3.28.0 

func (o GetGatewayVpnAttachmentsAttachmentIpsecConfigOutput) IpsecLifetime() pulumi.StringOutput

The IPsec lifetime. Unit: seconds.

func (GetGatewayVpnAttachmentsAttachmentIpsecConfigOutput) IpsecPfs added in v3.28.0 

func (o GetGatewayVpnAttachmentsAttachmentIpsecConfigOutput) IpsecPfs() pulumi.StringOutput

The DH group.

func (GetGatewayVpnAttachmentsAttachmentIpsecConfigOutput) ToGetGatewayVpnAttachmentsAttachmentIpsecConfigOutput added in v3.28.0 

func (o GetGatewayVpnAttachmentsAttachmentIpsecConfigOutput) ToGetGatewayVpnAttachmentsAttachmentIpsecConfigOutput() GetGatewayVpnAttachmentsAttachmentIpsecConfigOutput

func (GetGatewayVpnAttachmentsAttachmentIpsecConfigOutput) ToGetGatewayVpnAttachmentsAttachmentIpsecConfigOutputWithContext added in v3.28.0 

func (o GetGatewayVpnAttachmentsAttachmentIpsecConfigOutput) ToGetGatewayVpnAttachmentsAttachmentIpsecConfigOutputWithContext(ctx context.Context) GetGatewayVpnAttachmentsAttachmentIpsecConfigOutput

func (GetGatewayVpnAttachmentsAttachmentIpsecConfigOutput) ToOutput added in v3.43.1 

func (o GetGatewayVpnAttachmentsAttachmentIpsecConfigOutput) ToOutput(ctx context.Context) pulumix.Output[GetGatewayVpnAttachmentsAttachmentIpsecConfig]

type GetGatewayVpnAttachmentsAttachmentOutput added in v3.28.0 

type GetGatewayVpnAttachmentsAttachmentOutput struct{ *pulumi.OutputState }

func (GetGatewayVpnAttachmentsAttachmentOutput) BgpConfigs added in v3.28.0 

func (o GetGatewayVpnAttachmentsAttachmentOutput) BgpConfigs() GetGatewayVpnAttachmentsAttachmentBgpConfigArrayOutput

The configurations of the BGP routing protocol.

func (GetGatewayVpnAttachmentsAttachmentOutput) ConnectionStatus added in v3.28.0 

func (o GetGatewayVpnAttachmentsAttachmentOutput) ConnectionStatus() pulumi.StringOutput

The status of the IPsec-VPN connection.

func (GetGatewayVpnAttachmentsAttachmentOutput) CreateTime added in v3.28.0 

func (o GetGatewayVpnAttachmentsAttachmentOutput) CreateTime() pulumi.StringOutput

The creation time of the resource.

func (GetGatewayVpnAttachmentsAttachmentOutput) CustomerGatewayId added in v3.28.0 

func (o GetGatewayVpnAttachmentsAttachmentOutput) CustomerGatewayId() pulumi.StringOutput

The ID of the customer gateway.

func (GetGatewayVpnAttachmentsAttachmentOutput) EffectImmediately added in v3.28.0 

func (o GetGatewayVpnAttachmentsAttachmentOutput) EffectImmediately() pulumi.BoolOutput

Indicates whether IPsec-VPN negotiations are initiated immediately. Valid values.

func (GetGatewayVpnAttachmentsAttachmentOutput) ElementType added in v3.28.0 

func (GetGatewayVpnAttachmentsAttachmentOutput) ElementType() reflect.Type

func (GetGatewayVpnAttachmentsAttachmentOutput) HealthCheckConfigs added in v3.28.0 

func (o GetGatewayVpnAttachmentsAttachmentOutput) HealthCheckConfigs() GetGatewayVpnAttachmentsAttachmentHealthCheckConfigArrayOutput

The health check configurations.

func (GetGatewayVpnAttachmentsAttachmentOutput) Id added in v3.28.0 

func (o GetGatewayVpnAttachmentsAttachmentOutput) Id() pulumi.StringOutput

The ID of the Vpn Attachment.

func (GetGatewayVpnAttachmentsAttachmentOutput) IkeConfigs added in v3.28.0 

func (o GetGatewayVpnAttachmentsAttachmentOutput) IkeConfigs() GetGatewayVpnAttachmentsAttachmentIkeConfigArrayOutput

Configuration negotiated in the second stage.

func (GetGatewayVpnAttachmentsAttachmentOutput) InternetIp added in v3.29.0 

func (o GetGatewayVpnAttachmentsAttachmentOutput) InternetIp() pulumi.StringOutput

The internet ip of the resource. The cen.TransitRouterVpnAttachment resource will not have a value until after it is created.

func (GetGatewayVpnAttachmentsAttachmentOutput) IpsecConfigs added in v3.28.0 

func (o GetGatewayVpnAttachmentsAttachmentOutput) IpsecConfigs() GetGatewayVpnAttachmentsAttachmentIpsecConfigArrayOutput

The configuration of Phase 2 negotiations.

func (GetGatewayVpnAttachmentsAttachmentOutput) LocalSubnet added in v3.28.0 

func (o GetGatewayVpnAttachmentsAttachmentOutput) LocalSubnet() pulumi.StringOutput

The CIDR block of the virtual private cloud (VPC).

func (GetGatewayVpnAttachmentsAttachmentOutput) NetworkType added in v3.28.0 

func (o GetGatewayVpnAttachmentsAttachmentOutput) NetworkType() pulumi.StringOutput

The network type.

func (GetGatewayVpnAttachmentsAttachmentOutput) RemoteSubnet added in v3.28.0 

func (o GetGatewayVpnAttachmentsAttachmentOutput) RemoteSubnet() pulumi.StringOutput

The CIDR block of the on-premises data center.

func (GetGatewayVpnAttachmentsAttachmentOutput) Status added in v3.28.0 

func (o GetGatewayVpnAttachmentsAttachmentOutput) Status() pulumi.StringOutput

The status of the resource.

func (GetGatewayVpnAttachmentsAttachmentOutput) ToGetGatewayVpnAttachmentsAttachmentOutput added in v3.28.0 

func (o GetGatewayVpnAttachmentsAttachmentOutput) ToGetGatewayVpnAttachmentsAttachmentOutput() GetGatewayVpnAttachmentsAttachmentOutput

func (GetGatewayVpnAttachmentsAttachmentOutput) ToGetGatewayVpnAttachmentsAttachmentOutputWithContext added in v3.28.0 

func (o GetGatewayVpnAttachmentsAttachmentOutput) ToGetGatewayVpnAttachmentsAttachmentOutputWithContext(ctx context.Context) GetGatewayVpnAttachmentsAttachmentOutput

func (GetGatewayVpnAttachmentsAttachmentOutput) ToOutput added in v3.43.1 

func (o GetGatewayVpnAttachmentsAttachmentOutput) ToOutput(ctx context.Context) pulumix.Output[GetGatewayVpnAttachmentsAttachment]

func (GetGatewayVpnAttachmentsAttachmentOutput) VpnAttachmentName added in v3.28.0 

func (o GetGatewayVpnAttachmentsAttachmentOutput) VpnAttachmentName() pulumi.StringOutput

The name of the IPsec-VPN connection.

func (GetGatewayVpnAttachmentsAttachmentOutput) VpnConnectionId added in v3.28.0 

func (o GetGatewayVpnAttachmentsAttachmentOutput) VpnConnectionId() pulumi.StringOutput

The first ID of the resource.

type GetGatewayVpnAttachmentsOutputArgs added in v3.28.0 

type GetGatewayVpnAttachmentsOutputArgs struct {
	// A list of Vpn Attachment IDs.
	Ids pulumi.StringArrayInput `pulumi:"ids"`
	// A regex string to filter results by Vpn Attachment name.
	NameRegex pulumi.StringPtrInput `pulumi:"nameRegex"`
	// File name where to save data source results (after running `pulumi preview`).
	OutputFile pulumi.StringPtrInput `pulumi:"outputFile"`
	PageNumber pulumi.IntPtrInput    `pulumi:"pageNumber"`
	PageSize   pulumi.IntPtrInput    `pulumi:"pageSize"`
	// The status of the resource.
	Status pulumi.StringPtrInput `pulumi:"status"`
	// The parameter 'vpn_gateway_id' has been deprecated from 1.194.0.
	//
	// Deprecated: The parameter 'vpn_gateway_id' has been deprecated from 1.194.0.
	VpnGatewayId pulumi.StringPtrInput `pulumi:"vpnGatewayId"`
}

A collection of arguments for invoking getGatewayVpnAttachments.

func (GetGatewayVpnAttachmentsOutputArgs) ElementType added in v3.28.0 

func (GetGatewayVpnAttachmentsOutputArgs) ElementType() reflect.Type

type GetGatewayVpnAttachmentsResult added in v3.28.0 

type GetGatewayVpnAttachmentsResult struct {
	Attachments []GetGatewayVpnAttachmentsAttachment `pulumi:"attachments"`
	// The provider-assigned unique ID for this managed resource.
	Id         string   `pulumi:"id"`
	Ids        []string `pulumi:"ids"`
	NameRegex  *string  `pulumi:"nameRegex"`
	Names      []string `pulumi:"names"`
	OutputFile *string  `pulumi:"outputFile"`
	PageNumber *int     `pulumi:"pageNumber"`
	PageSize   *int     `pulumi:"pageSize"`
	Status     *string  `pulumi:"status"`
	// Deprecated: The parameter 'vpn_gateway_id' has been deprecated from 1.194.0.
	VpnGatewayId *string `pulumi:"vpnGatewayId"`
}

A collection of values returned by getGatewayVpnAttachments.

func GetGatewayVpnAttachments added in v3.28.0 

func GetGatewayVpnAttachments(ctx *pulumi.Context, args *GetGatewayVpnAttachmentsArgs, opts ...pulumi.InvokeOption) (*GetGatewayVpnAttachmentsResult, error)

This data source provides the Vpn Gateway Vpn Attachments of the current Alibaba Cloud user.

> **NOTE:** Available in v1.181.0+.

## Example Usage

Basic Usage

```go package main

import ( 

"github.com/pulumi/pulumi-alicloud/sdk/v3/go/alicloud/vpn"
"github.com/pulumi/pulumi/sdk/v3/go/pulumi"

) 

func main() {
	pulumi.Run(func(ctx *pulumi.Context) error {
		ids, err := vpn.GetGatewayVpnAttachments(ctx, nil, nil)
		if err != nil {
			return err
		}
		ctx.Export("vpnGatewayVpnAttachmentId1", ids.Attachments[0].Id)
		nameRegex, err := vpn.GetGatewayVpnAttachments(ctx, &vpn.GetGatewayVpnAttachmentsArgs{
			NameRegex: pulumi.StringRef("^my-VpnAttachment"),
		}, nil)
		if err != nil {
			return err
		}
		ctx.Export("vpnGatewayVpnAttachmentId2", nameRegex.Attachments[0].Id)
		ctx.Export("localId", data.Alicloud_vpn_gateway_vpn_attachments.Vpn_attachments.Attachments[0].Ike_config[0].Local_id)
		ctx.Export("internetIp", data.Alicloud_vpn_gateway_vpn_attachments.Vpn_attachments.Attachments[0].Internet_ip)
		return nil
	})
}

```

type GetGatewayVpnAttachmentsResultOutput added in v3.28.0 

type GetGatewayVpnAttachmentsResultOutput struct{ *pulumi.OutputState }

A collection of values returned by getGatewayVpnAttachments.

func GetGatewayVpnAttachmentsOutput added in v3.28.0 

func GetGatewayVpnAttachmentsOutput(ctx *pulumi.Context, args GetGatewayVpnAttachmentsOutputArgs, opts ...pulumi.InvokeOption) GetGatewayVpnAttachmentsResultOutput

func (GetGatewayVpnAttachmentsResultOutput) Attachments added in v3.28.0 

func (o GetGatewayVpnAttachmentsResultOutput) Attachments() GetGatewayVpnAttachmentsAttachmentArrayOutput

func (GetGatewayVpnAttachmentsResultOutput) ElementType added in v3.28.0 

func (GetGatewayVpnAttachmentsResultOutput) ElementType() reflect.Type

func (GetGatewayVpnAttachmentsResultOutput) Id added in v3.28.0 

func (o GetGatewayVpnAttachmentsResultOutput) Id() pulumi.StringOutput

The provider-assigned unique ID for this managed resource.

func (GetGatewayVpnAttachmentsResultOutput) Ids added in v3.28.0 

func (o GetGatewayVpnAttachmentsResultOutput) Ids() pulumi.StringArrayOutput

func (GetGatewayVpnAttachmentsResultOutput) NameRegex added in v3.28.0 

func (o GetGatewayVpnAttachmentsResultOutput) NameRegex() pulumi.StringPtrOutput

func (GetGatewayVpnAttachmentsResultOutput) Names added in v3.28.0 

func (o GetGatewayVpnAttachmentsResultOutput) Names() pulumi.StringArrayOutput

func (GetGatewayVpnAttachmentsResultOutput) OutputFile added in v3.28.0 

func (o GetGatewayVpnAttachmentsResultOutput) OutputFile() pulumi.StringPtrOutput

func (GetGatewayVpnAttachmentsResultOutput) PageNumber added in v3.28.0 

func (o GetGatewayVpnAttachmentsResultOutput) PageNumber() pulumi.IntPtrOutput

func (GetGatewayVpnAttachmentsResultOutput) PageSize added in v3.28.0 

func (o GetGatewayVpnAttachmentsResultOutput) PageSize() pulumi.IntPtrOutput

func (GetGatewayVpnAttachmentsResultOutput) Status added in v3.28.0 

func (o GetGatewayVpnAttachmentsResultOutput) Status() pulumi.StringPtrOutput

func (GetGatewayVpnAttachmentsResultOutput) ToGetGatewayVpnAttachmentsResultOutput added in v3.28.0 

func (o GetGatewayVpnAttachmentsResultOutput) ToGetGatewayVpnAttachmentsResultOutput() GetGatewayVpnAttachmentsResultOutput

func (GetGatewayVpnAttachmentsResultOutput) ToGetGatewayVpnAttachmentsResultOutputWithContext added in v3.28.0 

func (o GetGatewayVpnAttachmentsResultOutput) ToGetGatewayVpnAttachmentsResultOutputWithContext(ctx context.Context) GetGatewayVpnAttachmentsResultOutput

func (GetGatewayVpnAttachmentsResultOutput) ToOutput added in v3.43.1 

func (o GetGatewayVpnAttachmentsResultOutput) ToOutput(ctx context.Context) pulumix.Output[GetGatewayVpnAttachmentsResult]

func (GetGatewayVpnAttachmentsResultOutput) VpnGatewayId deprecated added in v3.28.0 

func (o GetGatewayVpnAttachmentsResultOutput) VpnGatewayId() pulumi.StringPtrOutput

Deprecated: The parameter 'vpn_gateway_id' has been deprecated from 1.194.0.

type GetGatewaysArgs 

type GetGatewaysArgs struct {
	// Limit search to specific business status - valid value is "Normal", "FinancialLocked".
	BusinessStatus *string `pulumi:"businessStatus"`
	// Indicates whether the IPsec-VPN feature is enabled.
	//
	// Deprecated: Field 'enable_ipsec' has been deprecated from provider version 1.193.0 and it will be removed in the future version.
	EnableIpsec *bool `pulumi:"enableIpsec"`
	// IDs of the VPN.
	Ids []string `pulumi:"ids"`
	// Include ineffective ordering data.
	IncludeReservationData *bool `pulumi:"includeReservationData"`
	// A regex string of VPN name.
	NameRegex *string `pulumi:"nameRegex"`
	// Save the result to the file.
	OutputFile *string `pulumi:"outputFile"`
	// Limit search to specific status - valid value is "Init", "Provisioning", "Active", "Updating", "Deleting".
	Status *string `pulumi:"status"`
	// Use the VPC ID as the search key.
	VpcId *string `pulumi:"vpcId"`
}

A collection of arguments for invoking getGateways.

type GetGatewaysGateway 

type GetGatewaysGateway struct {
	// Whether to automatically propagate BGP routes to the VPC. Valid values: `true`, `false`.
	AutoPropagate string `pulumi:"autoPropagate"`
	// Limit search to specific business status - valid value is "Normal", "FinancialLocked".
	BusinessStatus string `pulumi:"businessStatus"`
	// The creation time of the VPN gateway.
	CreateTime string `pulumi:"createTime"`
	// The description of the VPN
	Description string `pulumi:"description"`
	// Indicates whether the IPsec-VPN feature is enabled.
	EnableIpsec string `pulumi:"enableIpsec"`
	// Whether the ssl function is enabled.
	EnableSsl string `pulumi:"enableSsl"`
	// The expiration time of the VPN gateway.
	EndTime string `pulumi:"endTime"`
	// ID of the VPN.
	Id string `pulumi:"id"`
	// The charge type of the VPN gateway.
	InstanceChargeType string `pulumi:"instanceChargeType"`
	// The internet ip of the VPN.
	InternetIp string `pulumi:"internetIp"`
	// The name of the VPN.
	Name string `pulumi:"name"`
	// The network type of the VPN gateway.
	NetworkType string `pulumi:"networkType"`
	// The Specification of the VPN
	Specification string `pulumi:"specification"`
	// Total count of ssl vpn connections.
	SslConnections int `pulumi:"sslConnections"`
	// Limit search to specific status - valid value is "Init", "Provisioning", "Active", "Updating", "Deleting".
	Status string `pulumi:"status"`
	// Use the VPC ID as the search key.
	VpcId string `pulumi:"vpcId"`
}

type GetGatewaysGatewayArgs 

type GetGatewaysGatewayArgs struct {
	// Whether to automatically propagate BGP routes to the VPC. Valid values: `true`, `false`.
	AutoPropagate pulumi.StringInput `pulumi:"autoPropagate"`
	// Limit search to specific business status - valid value is "Normal", "FinancialLocked".
	BusinessStatus pulumi.StringInput `pulumi:"businessStatus"`
	// The creation time of the VPN gateway.
	CreateTime pulumi.StringInput `pulumi:"createTime"`
	// The description of the VPN
	Description pulumi.StringInput `pulumi:"description"`
	// Indicates whether the IPsec-VPN feature is enabled.
	EnableIpsec pulumi.StringInput `pulumi:"enableIpsec"`
	// Whether the ssl function is enabled.
	EnableSsl pulumi.StringInput `pulumi:"enableSsl"`
	// The expiration time of the VPN gateway.
	EndTime pulumi.StringInput `pulumi:"endTime"`
	// ID of the VPN.
	Id pulumi.StringInput `pulumi:"id"`
	// The charge type of the VPN gateway.
	InstanceChargeType pulumi.StringInput `pulumi:"instanceChargeType"`
	// The internet ip of the VPN.
	InternetIp pulumi.StringInput `pulumi:"internetIp"`
	// The name of the VPN.
	Name pulumi.StringInput `pulumi:"name"`
	// The network type of the VPN gateway.
	NetworkType pulumi.StringInput `pulumi:"networkType"`
	// The Specification of the VPN
	Specification pulumi.StringInput `pulumi:"specification"`
	// Total count of ssl vpn connections.
	SslConnections pulumi.IntInput `pulumi:"sslConnections"`
	// Limit search to specific status - valid value is "Init", "Provisioning", "Active", "Updating", "Deleting".
	Status pulumi.StringInput `pulumi:"status"`
	// Use the VPC ID as the search key.
	VpcId pulumi.StringInput `pulumi:"vpcId"`
}

func (GetGatewaysGatewayArgs) ElementType 

func (GetGatewaysGatewayArgs) ElementType() reflect.Type

func (GetGatewaysGatewayArgs) ToGetGatewaysGatewayOutput 

func (i GetGatewaysGatewayArgs) ToGetGatewaysGatewayOutput() GetGatewaysGatewayOutput

func (GetGatewaysGatewayArgs) ToGetGatewaysGatewayOutputWithContext 

func (i GetGatewaysGatewayArgs) ToGetGatewaysGatewayOutputWithContext(ctx context.Context) GetGatewaysGatewayOutput

func (GetGatewaysGatewayArgs) ToOutput added in v3.43.1 

func (i GetGatewaysGatewayArgs) ToOutput(ctx context.Context) pulumix.Output[GetGatewaysGateway]

type GetGatewaysGatewayArray 

type GetGatewaysGatewayArray []GetGatewaysGatewayInput

func (GetGatewaysGatewayArray) ElementType 

func (GetGatewaysGatewayArray) ElementType() reflect.Type

func (GetGatewaysGatewayArray) ToGetGatewaysGatewayArrayOutput 

func (i GetGatewaysGatewayArray) ToGetGatewaysGatewayArrayOutput() GetGatewaysGatewayArrayOutput

func (GetGatewaysGatewayArray) ToGetGatewaysGatewayArrayOutputWithContext 

func (i GetGatewaysGatewayArray) ToGetGatewaysGatewayArrayOutputWithContext(ctx context.Context) GetGatewaysGatewayArrayOutput

func (GetGatewaysGatewayArray) ToOutput added in v3.43.1 

func (i GetGatewaysGatewayArray) ToOutput(ctx context.Context) pulumix.Output[[]GetGatewaysGateway]

type GetGatewaysGatewayArrayInput 

type GetGatewaysGatewayArrayInput interface {
	pulumi.Input

	ToGetGatewaysGatewayArrayOutput() GetGatewaysGatewayArrayOutput
	ToGetGatewaysGatewayArrayOutputWithContext(context.Context) GetGatewaysGatewayArrayOutput
}

GetGatewaysGatewayArrayInput is an input type that accepts GetGatewaysGatewayArray and GetGatewaysGatewayArrayOutput values. You can construct a concrete instance of `GetGatewaysGatewayArrayInput` via: 

GetGatewaysGatewayArray{ GetGatewaysGatewayArgs{...} }

type GetGatewaysGatewayArrayOutput 

type GetGatewaysGatewayArrayOutput struct{ *pulumi.OutputState }

func (GetGatewaysGatewayArrayOutput) ElementType 

func (GetGatewaysGatewayArrayOutput) ElementType() reflect.Type

func (GetGatewaysGatewayArrayOutput) Index 

func (o GetGatewaysGatewayArrayOutput) Index(i pulumi.IntInput) GetGatewaysGatewayOutput

func (GetGatewaysGatewayArrayOutput) ToGetGatewaysGatewayArrayOutput 

func (o GetGatewaysGatewayArrayOutput) ToGetGatewaysGatewayArrayOutput() GetGatewaysGatewayArrayOutput

func (GetGatewaysGatewayArrayOutput) ToGetGatewaysGatewayArrayOutputWithContext 

func (o GetGatewaysGatewayArrayOutput) ToGetGatewaysGatewayArrayOutputWithContext(ctx context.Context) GetGatewaysGatewayArrayOutput

func (GetGatewaysGatewayArrayOutput) ToOutput added in v3.43.1 

func (o GetGatewaysGatewayArrayOutput) ToOutput(ctx context.Context) pulumix.Output[[]GetGatewaysGateway]

type GetGatewaysGatewayInput 

type GetGatewaysGatewayInput interface {
	pulumi.Input

	ToGetGatewaysGatewayOutput() GetGatewaysGatewayOutput
	ToGetGatewaysGatewayOutputWithContext(context.Context) GetGatewaysGatewayOutput
}

GetGatewaysGatewayInput is an input type that accepts GetGatewaysGatewayArgs and GetGatewaysGatewayOutput values. You can construct a concrete instance of `GetGatewaysGatewayInput` via: 

GetGatewaysGatewayArgs{...}

type GetGatewaysGatewayOutput 

type GetGatewaysGatewayOutput struct{ *pulumi.OutputState }

func (GetGatewaysGatewayOutput) AutoPropagate added in v3.29.0 

func (o GetGatewaysGatewayOutput) AutoPropagate() pulumi.StringOutput

Whether to automatically propagate BGP routes to the VPC. Valid values: `true`, `false`.

func (GetGatewaysGatewayOutput) BusinessStatus 

func (o GetGatewaysGatewayOutput) BusinessStatus() pulumi.StringOutput

Limit search to specific business status - valid value is "Normal", "FinancialLocked".

func (GetGatewaysGatewayOutput) CreateTime 

func (o GetGatewaysGatewayOutput) CreateTime() pulumi.StringOutput

The creation time of the VPN gateway.

func (GetGatewaysGatewayOutput) Description 

func (o GetGatewaysGatewayOutput) Description() pulumi.StringOutput

The description of the VPN

func (GetGatewaysGatewayOutput) ElementType 

func (GetGatewaysGatewayOutput) ElementType() reflect.Type

func (GetGatewaysGatewayOutput) EnableIpsec 

func (o GetGatewaysGatewayOutput) EnableIpsec() pulumi.StringOutput

Indicates whether the IPsec-VPN feature is enabled.

func (GetGatewaysGatewayOutput) EnableSsl 

func (o GetGatewaysGatewayOutput) EnableSsl() pulumi.StringOutput

Whether the ssl function is enabled.

func (GetGatewaysGatewayOutput) EndTime 

func (o GetGatewaysGatewayOutput) EndTime() pulumi.StringOutput

The expiration time of the VPN gateway.

func (GetGatewaysGatewayOutput) Id 

func (o GetGatewaysGatewayOutput) Id() pulumi.StringOutput

ID of the VPN.

func (GetGatewaysGatewayOutput) InstanceChargeType 

func (o GetGatewaysGatewayOutput) InstanceChargeType() pulumi.StringOutput

The charge type of the VPN gateway.

func (GetGatewaysGatewayOutput) InternetIp 

func (o GetGatewaysGatewayOutput) InternetIp() pulumi.StringOutput

The internet ip of the VPN.

func (GetGatewaysGatewayOutput) Name 

func (o GetGatewaysGatewayOutput) Name() pulumi.StringOutput

The name of the VPN.

func (GetGatewaysGatewayOutput) NetworkType added in v3.29.0 

func (o GetGatewaysGatewayOutput) NetworkType() pulumi.StringOutput

The network type of the VPN gateway.

func (GetGatewaysGatewayOutput) Specification 

func (o GetGatewaysGatewayOutput) Specification() pulumi.StringOutput

The Specification of the VPN

func (GetGatewaysGatewayOutput) SslConnections 

func (o GetGatewaysGatewayOutput) SslConnections() pulumi.IntOutput

Total count of ssl vpn connections.

func (GetGatewaysGatewayOutput) Status 

func (o GetGatewaysGatewayOutput) Status() pulumi.StringOutput

Limit search to specific status - valid value is "Init", "Provisioning", "Active", "Updating", "Deleting".

func (GetGatewaysGatewayOutput) ToGetGatewaysGatewayOutput 

func (o GetGatewaysGatewayOutput) ToGetGatewaysGatewayOutput() GetGatewaysGatewayOutput

func (GetGatewaysGatewayOutput) ToGetGatewaysGatewayOutputWithContext 

func (o GetGatewaysGatewayOutput) ToGetGatewaysGatewayOutputWithContext(ctx context.Context) GetGatewaysGatewayOutput

func (GetGatewaysGatewayOutput) ToOutput added in v3.43.1 

func (o GetGatewaysGatewayOutput) ToOutput(ctx context.Context) pulumix.Output[GetGatewaysGateway]

func (GetGatewaysGatewayOutput) VpcId 

func (o GetGatewaysGatewayOutput) VpcId() pulumi.StringOutput

Use the VPC ID as the search key.

type GetGatewaysOutputArgs added in v3.9.0 

type GetGatewaysOutputArgs struct {
	// Limit search to specific business status - valid value is "Normal", "FinancialLocked".
	BusinessStatus pulumi.StringPtrInput `pulumi:"businessStatus"`
	// Indicates whether the IPsec-VPN feature is enabled.
	//
	// Deprecated: Field 'enable_ipsec' has been deprecated from provider version 1.193.0 and it will be removed in the future version.
	EnableIpsec pulumi.BoolPtrInput `pulumi:"enableIpsec"`
	// IDs of the VPN.
	Ids pulumi.StringArrayInput `pulumi:"ids"`
	// Include ineffective ordering data.
	IncludeReservationData pulumi.BoolPtrInput `pulumi:"includeReservationData"`
	// A regex string of VPN name.
	NameRegex pulumi.StringPtrInput `pulumi:"nameRegex"`
	// Save the result to the file.
	OutputFile pulumi.StringPtrInput `pulumi:"outputFile"`
	// Limit search to specific status - valid value is "Init", "Provisioning", "Active", "Updating", "Deleting".
	Status pulumi.StringPtrInput `pulumi:"status"`
	// Use the VPC ID as the search key.
	VpcId pulumi.StringPtrInput `pulumi:"vpcId"`
}

A collection of arguments for invoking getGateways.

func (GetGatewaysOutputArgs) ElementType added in v3.9.0 

func (GetGatewaysOutputArgs) ElementType() reflect.Type

type GetGatewaysResult 

type GetGatewaysResult struct {
	// The business status of the VPN gateway.
	BusinessStatus *string `pulumi:"businessStatus"`
	// Whether the ipsec function is enabled.
	//
	// Deprecated: Field 'enable_ipsec' has been deprecated from provider version 1.193.0 and it will be removed in the future version.
	EnableIpsec *bool `pulumi:"enableIpsec"`
	// A list of VPN gateways. Each element contains the following attributes:
	Gateways []GetGatewaysGateway `pulumi:"gateways"`
	// The provider-assigned unique ID for this managed resource.
	Id string `pulumi:"id"`
	// IDs of the VPN.
	Ids                    []string `pulumi:"ids"`
	IncludeReservationData *bool    `pulumi:"includeReservationData"`
	NameRegex              *string  `pulumi:"nameRegex"`
	// names of the VPN.
	Names      []string `pulumi:"names"`
	OutputFile *string  `pulumi:"outputFile"`
	// The status of the VPN
	Status *string `pulumi:"status"`
	// ID of the VPC that the VPN belongs.
	VpcId *string `pulumi:"vpcId"`
}

A collection of values returned by getGateways.

func GetGateways 

func GetGateways(ctx *pulumi.Context, args *GetGatewaysArgs, opts ...pulumi.InvokeOption) (*GetGatewaysResult, error)

The VPNs data source lists a number of VPNs resource information owned by an Alicloud account.

## Example Usage

```go package main

import ( 

"github.com/pulumi/pulumi-alicloud/sdk/v3/go/alicloud/vpn"
"github.com/pulumi/pulumi/sdk/v3/go/pulumi"

) 

func main() {
	pulumi.Run(func(ctx *pulumi.Context) error {
		_, err := vpn.GetGateways(ctx, &vpn.GetGatewaysArgs{
			BusinessStatus: pulumi.StringRef("Normal"),
			Ids: []string{
				"fake-vpn-id1",
				"fake-vpn-id2",
			},
			IncludeReservationData: pulumi.BoolRef(true),
			NameRegex:              pulumi.StringRef("testAcc*"),
			OutputFile:             pulumi.StringRef("/tmp/vpns"),
			Status:                 pulumi.StringRef("Active"),
			VpcId:                  pulumi.StringRef("fake-vpc-id"),
		}, nil)
		if err != nil {
			return err
		}
		return nil
	})
}

```

type GetGatewaysResultOutput added in v3.9.0 

type GetGatewaysResultOutput struct{ *pulumi.OutputState }

A collection of values returned by getGateways.

func GetGatewaysOutput added in v3.9.0 

func GetGatewaysOutput(ctx *pulumi.Context, args GetGatewaysOutputArgs, opts ...pulumi.InvokeOption) GetGatewaysResultOutput

func (GetGatewaysResultOutput) BusinessStatus added in v3.9.0 

func (o GetGatewaysResultOutput) BusinessStatus() pulumi.StringPtrOutput

The business status of the VPN gateway.

func (GetGatewaysResultOutput) ElementType added in v3.9.0 

func (GetGatewaysResultOutput) ElementType() reflect.Type

func (GetGatewaysResultOutput) EnableIpsec deprecated added in v3.20.0 

func (o GetGatewaysResultOutput) EnableIpsec() pulumi.BoolPtrOutput

Whether the ipsec function is enabled.

Deprecated: Field 'enable_ipsec' has been deprecated from provider version 1.193.0 and it will be removed in the future version.

func (GetGatewaysResultOutput) Gateways added in v3.9.0 

func (o GetGatewaysResultOutput) Gateways() GetGatewaysGatewayArrayOutput

A list of VPN gateways. Each element contains the following attributes:

func (GetGatewaysResultOutput) Id added in v3.9.0 

func (o GetGatewaysResultOutput) Id() pulumi.StringOutput

The provider-assigned unique ID for this managed resource.

func (GetGatewaysResultOutput) Ids added in v3.9.0 

func (o GetGatewaysResultOutput) Ids() pulumi.StringArrayOutput

IDs of the VPN.

func (GetGatewaysResultOutput) IncludeReservationData added in v3.29.0 

func (o GetGatewaysResultOutput) IncludeReservationData() pulumi.BoolPtrOutput

func (GetGatewaysResultOutput) NameRegex added in v3.9.0 

func (o GetGatewaysResultOutput) NameRegex() pulumi.StringPtrOutput

func (GetGatewaysResultOutput) Names added in v3.9.0 

func (o GetGatewaysResultOutput) Names() pulumi.StringArrayOutput

names of the VPN.

func (GetGatewaysResultOutput) OutputFile added in v3.9.0 

func (o GetGatewaysResultOutput) OutputFile() pulumi.StringPtrOutput

func (GetGatewaysResultOutput) Status added in v3.9.0 

func (o GetGatewaysResultOutput) Status() pulumi.StringPtrOutput

The status of the VPN

func (GetGatewaysResultOutput) ToGetGatewaysResultOutput added in v3.9.0 

func (o GetGatewaysResultOutput) ToGetGatewaysResultOutput() GetGatewaysResultOutput

func (GetGatewaysResultOutput) ToGetGatewaysResultOutputWithContext added in v3.9.0 

func (o GetGatewaysResultOutput) ToGetGatewaysResultOutputWithContext(ctx context.Context) GetGatewaysResultOutput

func (GetGatewaysResultOutput) ToOutput added in v3.43.1 

func (o GetGatewaysResultOutput) ToOutput(ctx context.Context) pulumix.Output[GetGatewaysResult]

func (GetGatewaysResultOutput) VpcId added in v3.9.0 

func (o GetGatewaysResultOutput) VpcId() pulumi.StringPtrOutput

ID of the VPC that the VPN belongs.

type IpsecServer added in v3.20.0 

type IpsecServer struct {
	pulumi.CustomResourceState

	// The client CIDR block. It refers to the CIDR block that is allocated to the virtual interface of the client.
	ClientIpPool pulumi.StringOutput `pulumi:"clientIpPool"`
	// The dry run.
	DryRun pulumi.BoolPtrOutput `pulumi:"dryRun"`
	// Specifies whether you want the configuration to immediately take effect.
	EffectImmediately pulumi.BoolPtrOutput `pulumi:"effectImmediately"`
	// The configuration of Phase 1 negotiations. See the following `Block ikeConfig`.
	IkeConfigs IpsecServerIkeConfigArrayOutput `pulumi:"ikeConfigs"`
	// The configuration of Phase 2 negotiations. See the following `Block ipsecConfig`.
	IpsecConfigs IpsecServerIpsecConfigArrayOutput `pulumi:"ipsecConfigs"`
	// The name of the IPsec server. The name must be `2` to `128` characters in length, and can contain digits, hyphens (-), and underscores (_). It must start with a letter.
	IpsecServerName pulumi.StringPtrOutput `pulumi:"ipsecServerName"`
	// The local CIDR block. It refers to the CIDR block of the virtual private cloud (VPC) that is used to connect with the client. Separate multiple CIDR blocks with commas (,). Example: `192.168.1.0/24,192.168.2.0/24`.
	LocalSubnet pulumi.StringOutput `pulumi:"localSubnet"`
	// The pre-shared key. The pre-shared key is used to authenticate the VPN gateway and the client. By default, the system generates a random string that is 16 bits in length. You can also specify the pre-shared key. It can contain at most 100 characters.
	Psk pulumi.StringOutput `pulumi:"psk"`
	// Whether to enable the pre-shared key authentication method. The value is only `true`, which indicates that the pre-shared key authentication method is enabled.
	PskEnabled pulumi.BoolPtrOutput `pulumi:"pskEnabled"`
	// The ID of the VPN gateway.
	VpnGatewayId pulumi.StringOutput `pulumi:"vpnGatewayId"`
}

Provides a VPN Ipsec Server resource.

For information about VPN Ipsec Server and how to use it, see [What is Ipsec Server](https://www.alibabacloud.com/help/en/doc-detail/205454.html).

> **NOTE:** Available in v1.161.0+.

## Example Usage

Basic Usage

```go package main

import ( 

"github.com/pulumi/pulumi-alicloud/sdk/v3/go/alicloud"
"github.com/pulumi/pulumi-alicloud/sdk/v3/go/alicloud/vpc"
"github.com/pulumi/pulumi-alicloud/sdk/v3/go/alicloud/vpn"
"github.com/pulumi/pulumi/sdk/v3/go/pulumi"

) 

func main() {
	pulumi.Run(func(ctx *pulumi.Context) error {
		fooZones, err := alicloud.GetZones(ctx, &alicloud.GetZonesArgs{
			AvailableResourceCreation: pulumi.StringRef("VSwitch"),
		}, nil)
		if err != nil {
			return err
		}
		fooNetwork, err := vpc.NewNetwork(ctx, "fooNetwork", &vpc.NetworkArgs{
			VpcName:   pulumi.String("terraform-example"),
			CidrBlock: pulumi.String("172.16.0.0/12"),
		})
		if err != nil {
			return err
		}
		fooSwitch, err := vpc.NewSwitch(ctx, "fooSwitch", &vpc.SwitchArgs{
			VswitchName: pulumi.String("terraform-example"),
			CidrBlock:   pulumi.String("172.16.0.0/21"),
			VpcId:       fooNetwork.ID(),
			ZoneId:      *pulumi.String(fooZones.Zones[0].Id),
		})
		if err != nil {
			return err
		}
		fooGateway, err := vpn.NewGateway(ctx, "fooGateway", &vpn.GatewayArgs{
			VpcId:              fooNetwork.ID(),
			Bandwidth:          pulumi.Int(10),
			EnableSsl:          pulumi.Bool(true),
			InstanceChargeType: pulumi.String("PrePaid"),
			Description:        pulumi.String("terraform-example"),
			VswitchId:          fooSwitch.ID(),
		})
		if err != nil {
			return err
		}
		_, err = vpn.NewIpsecServer(ctx, "fooIpsecServer", &vpn.IpsecServerArgs{
			ClientIpPool:    pulumi.String("10.0.0.0/24"),
			IpsecServerName: pulumi.String("terraform-example"),
			LocalSubnet:     pulumi.String("192.168.0.0/24"),
			VpnGatewayId:    fooGateway.ID(),
			PskEnabled:      pulumi.Bool(true),
		})
		if err != nil {
			return err
		}
		return nil
	})
}

```

## Import

VPN Ipsec Server can be imported using the id, e.g.

```sh 

$ pulumi import alicloud:vpn/ipsecServer:IpsecServer example <id>

```

func GetIpsecServer added in v3.20.0 

func GetIpsecServer(ctx *pulumi.Context,
	name string, id pulumi.IDInput, state *IpsecServerState, opts ...pulumi.ResourceOption) (*IpsecServer, error)

GetIpsecServer gets an existing IpsecServer resource's state with the given name, ID, and optional state properties that are used to uniquely qualify the lookup (nil if not required).

func NewIpsecServer added in v3.20.0 

func NewIpsecServer(ctx *pulumi.Context,
	name string, args *IpsecServerArgs, opts ...pulumi.ResourceOption) (*IpsecServer, error)

NewIpsecServer registers a new resource with the given unique name, arguments, and options.

func (*IpsecServer) ElementType added in v3.20.0 

func (*IpsecServer) ElementType() reflect.Type

func (*IpsecServer) ToIpsecServerOutput added in v3.20.0 

func (i *IpsecServer) ToIpsecServerOutput() IpsecServerOutput

func (*IpsecServer) ToIpsecServerOutputWithContext added in v3.20.0 

func (i *IpsecServer) ToIpsecServerOutputWithContext(ctx context.Context) IpsecServerOutput

func (*IpsecServer) ToOutput added in v3.43.1 

func (i *IpsecServer) ToOutput(ctx context.Context) pulumix.Output[*IpsecServer]

type IpsecServerArgs added in v3.20.0 

type IpsecServerArgs struct {
	// The client CIDR block. It refers to the CIDR block that is allocated to the virtual interface of the client.
	ClientIpPool pulumi.StringInput
	// The dry run.
	DryRun pulumi.BoolPtrInput
	// Specifies whether you want the configuration to immediately take effect.
	EffectImmediately pulumi.BoolPtrInput
	// The configuration of Phase 1 negotiations. See the following `Block ikeConfig`.
	IkeConfigs IpsecServerIkeConfigArrayInput
	// The configuration of Phase 2 negotiations. See the following `Block ipsecConfig`.
	IpsecConfigs IpsecServerIpsecConfigArrayInput
	// The name of the IPsec server. The name must be `2` to `128` characters in length, and can contain digits, hyphens (-), and underscores (_). It must start with a letter.
	IpsecServerName pulumi.StringPtrInput
	// The local CIDR block. It refers to the CIDR block of the virtual private cloud (VPC) that is used to connect with the client. Separate multiple CIDR blocks with commas (,). Example: `192.168.1.0/24,192.168.2.0/24`.
	LocalSubnet pulumi.StringInput
	// The pre-shared key. The pre-shared key is used to authenticate the VPN gateway and the client. By default, the system generates a random string that is 16 bits in length. You can also specify the pre-shared key. It can contain at most 100 characters.
	Psk pulumi.StringPtrInput
	// Whether to enable the pre-shared key authentication method. The value is only `true`, which indicates that the pre-shared key authentication method is enabled.
	PskEnabled pulumi.BoolPtrInput
	// The ID of the VPN gateway.
	VpnGatewayId pulumi.StringInput
}

The set of arguments for constructing a IpsecServer resource.

func (IpsecServerArgs) ElementType added in v3.20.0 

func (IpsecServerArgs) ElementType() reflect.Type

type IpsecServerArray added in v3.20.0 

type IpsecServerArray []IpsecServerInput

func (IpsecServerArray) ElementType added in v3.20.0 

func (IpsecServerArray) ElementType() reflect.Type

func (IpsecServerArray) ToIpsecServerArrayOutput added in v3.20.0 

func (i IpsecServerArray) ToIpsecServerArrayOutput() IpsecServerArrayOutput

func (IpsecServerArray) ToIpsecServerArrayOutputWithContext added in v3.20.0 

func (i IpsecServerArray) ToIpsecServerArrayOutputWithContext(ctx context.Context) IpsecServerArrayOutput

func (IpsecServerArray) ToOutput added in v3.43.1 

func (i IpsecServerArray) ToOutput(ctx context.Context) pulumix.Output[[]*IpsecServer]

type IpsecServerArrayInput added in v3.20.0 

type IpsecServerArrayInput interface {
	pulumi.Input

	ToIpsecServerArrayOutput() IpsecServerArrayOutput
	ToIpsecServerArrayOutputWithContext(context.Context) IpsecServerArrayOutput
}

IpsecServerArrayInput is an input type that accepts IpsecServerArray and IpsecServerArrayOutput values. You can construct a concrete instance of `IpsecServerArrayInput` via: 

IpsecServerArray{ IpsecServerArgs{...} }

type IpsecServerArrayOutput added in v3.20.0 

type IpsecServerArrayOutput struct{ *pulumi.OutputState }

func (IpsecServerArrayOutput) ElementType added in v3.20.0 

func (IpsecServerArrayOutput) ElementType() reflect.Type

func (IpsecServerArrayOutput) Index added in v3.20.0 

func (o IpsecServerArrayOutput) Index(i pulumi.IntInput) IpsecServerOutput

func (IpsecServerArrayOutput) ToIpsecServerArrayOutput added in v3.20.0 

func (o IpsecServerArrayOutput) ToIpsecServerArrayOutput() IpsecServerArrayOutput

func (IpsecServerArrayOutput) ToIpsecServerArrayOutputWithContext added in v3.20.0 

func (o IpsecServerArrayOutput) ToIpsecServerArrayOutputWithContext(ctx context.Context) IpsecServerArrayOutput

func (IpsecServerArrayOutput) ToOutput added in v3.43.1 

func (o IpsecServerArrayOutput) ToOutput(ctx context.Context) pulumix.Output[[]*IpsecServer]

type IpsecServerIkeConfig added in v3.20.0 

type IpsecServerIkeConfig struct {
	// The authentication algorithm that is used in Phase 1 negotiations. Default value: `sha1`.
	IkeAuthAlg *string `pulumi:"ikeAuthAlg"`
	// The encryption algorithm that is used in Phase 1 negotiations. Default value: `aes`.
	IkeEncAlg *string `pulumi:"ikeEncAlg"`
	// IkeLifetime: the SA lifetime determined by Phase 1 negotiations. Valid values: `0` to `86400`. Default value: `86400`. Unit: `seconds`.
	IkeLifetime *int `pulumi:"ikeLifetime"`
	// The IKE negotiation mode. Default value: `main`.
	IkeMode *string `pulumi:"ikeMode"`
	// The Diffie-Hellman key exchange algorithm that is used in Phase 1 negotiations. Default value: `group2`.
	IkePfs *string `pulumi:"ikePfs"`
	// The IKE version. Valid values: `ikev1` and `ikev2`. Default value: `ikev2`.
	IkeVersion *string `pulumi:"ikeVersion"`
	// The identifier of the IPsec server. The value can be a fully qualified domain name (FQDN) or an IP address. The default value is the public IP address of the VPN gateway.
	LocalId *string `pulumi:"localId"`
	// The identifier of the customer gateway. The value can be an FQDN or an IP address. By default, this parameter is not specified.
	RemoteId *string `pulumi:"remoteId"`
}

type IpsecServerIkeConfigArgs added in v3.20.0 

type IpsecServerIkeConfigArgs struct {
	// The authentication algorithm that is used in Phase 1 negotiations. Default value: `sha1`.
	IkeAuthAlg pulumi.StringPtrInput `pulumi:"ikeAuthAlg"`
	// The encryption algorithm that is used in Phase 1 negotiations. Default value: `aes`.
	IkeEncAlg pulumi.StringPtrInput `pulumi:"ikeEncAlg"`
	// IkeLifetime: the SA lifetime determined by Phase 1 negotiations. Valid values: `0` to `86400`. Default value: `86400`. Unit: `seconds`.
	IkeLifetime pulumi.IntPtrInput `pulumi:"ikeLifetime"`
	// The IKE negotiation mode. Default value: `main`.
	IkeMode pulumi.StringPtrInput `pulumi:"ikeMode"`
	// The Diffie-Hellman key exchange algorithm that is used in Phase 1 negotiations. Default value: `group2`.
	IkePfs pulumi.StringPtrInput `pulumi:"ikePfs"`
	// The IKE version. Valid values: `ikev1` and `ikev2`. Default value: `ikev2`.
	IkeVersion pulumi.StringPtrInput `pulumi:"ikeVersion"`
	// The identifier of the IPsec server. The value can be a fully qualified domain name (FQDN) or an IP address. The default value is the public IP address of the VPN gateway.
	LocalId pulumi.StringPtrInput `pulumi:"localId"`
	// The identifier of the customer gateway. The value can be an FQDN or an IP address. By default, this parameter is not specified.
	RemoteId pulumi.StringPtrInput `pulumi:"remoteId"`
}

func (IpsecServerIkeConfigArgs) ElementType added in v3.20.0 

func (IpsecServerIkeConfigArgs) ElementType() reflect.Type

func (IpsecServerIkeConfigArgs) ToIpsecServerIkeConfigOutput added in v3.20.0 

func (i IpsecServerIkeConfigArgs) ToIpsecServerIkeConfigOutput() IpsecServerIkeConfigOutput

func (IpsecServerIkeConfigArgs) ToIpsecServerIkeConfigOutputWithContext added in v3.20.0 

func (i IpsecServerIkeConfigArgs) ToIpsecServerIkeConfigOutputWithContext(ctx context.Context) IpsecServerIkeConfigOutput

func (IpsecServerIkeConfigArgs) ToOutput added in v3.43.1 

func (i IpsecServerIkeConfigArgs) ToOutput(ctx context.Context) pulumix.Output[IpsecServerIkeConfig]

type IpsecServerIkeConfigArray added in v3.20.0 

type IpsecServerIkeConfigArray []IpsecServerIkeConfigInput

func (IpsecServerIkeConfigArray) ElementType added in v3.20.0 

func (IpsecServerIkeConfigArray) ElementType() reflect.Type

func (IpsecServerIkeConfigArray) ToIpsecServerIkeConfigArrayOutput added in v3.20.0 

func (i IpsecServerIkeConfigArray) ToIpsecServerIkeConfigArrayOutput() IpsecServerIkeConfigArrayOutput

func (IpsecServerIkeConfigArray) ToIpsecServerIkeConfigArrayOutputWithContext added in v3.20.0 

func (i IpsecServerIkeConfigArray) ToIpsecServerIkeConfigArrayOutputWithContext(ctx context.Context) IpsecServerIkeConfigArrayOutput

func (IpsecServerIkeConfigArray) ToOutput added in v3.43.1 

func (i IpsecServerIkeConfigArray) ToOutput(ctx context.Context) pulumix.Output[[]IpsecServerIkeConfig]

type IpsecServerIkeConfigArrayInput added in v3.20.0 

type IpsecServerIkeConfigArrayInput interface {
	pulumi.Input

	ToIpsecServerIkeConfigArrayOutput() IpsecServerIkeConfigArrayOutput
	ToIpsecServerIkeConfigArrayOutputWithContext(context.Context) IpsecServerIkeConfigArrayOutput
}

IpsecServerIkeConfigArrayInput is an input type that accepts IpsecServerIkeConfigArray and IpsecServerIkeConfigArrayOutput values. You can construct a concrete instance of `IpsecServerIkeConfigArrayInput` via: 

IpsecServerIkeConfigArray{ IpsecServerIkeConfigArgs{...} }

type IpsecServerIkeConfigArrayOutput added in v3.20.0 

type IpsecServerIkeConfigArrayOutput struct{ *pulumi.OutputState }

func (IpsecServerIkeConfigArrayOutput) ElementType added in v3.20.0 

func (IpsecServerIkeConfigArrayOutput) ElementType() reflect.Type

func (IpsecServerIkeConfigArrayOutput) Index added in v3.20.0 

func (o IpsecServerIkeConfigArrayOutput) Index(i pulumi.IntInput) IpsecServerIkeConfigOutput

func (IpsecServerIkeConfigArrayOutput) ToIpsecServerIkeConfigArrayOutput added in v3.20.0 

func (o IpsecServerIkeConfigArrayOutput) ToIpsecServerIkeConfigArrayOutput() IpsecServerIkeConfigArrayOutput

func (IpsecServerIkeConfigArrayOutput) ToIpsecServerIkeConfigArrayOutputWithContext added in v3.20.0 

func (o IpsecServerIkeConfigArrayOutput) ToIpsecServerIkeConfigArrayOutputWithContext(ctx context.Context) IpsecServerIkeConfigArrayOutput

func (IpsecServerIkeConfigArrayOutput) ToOutput added in v3.43.1 

func (o IpsecServerIkeConfigArrayOutput) ToOutput(ctx context.Context) pulumix.Output[[]IpsecServerIkeConfig]

type IpsecServerIkeConfigInput added in v3.20.0 

type IpsecServerIkeConfigInput interface {
	pulumi.Input

	ToIpsecServerIkeConfigOutput() IpsecServerIkeConfigOutput
	ToIpsecServerIkeConfigOutputWithContext(context.Context) IpsecServerIkeConfigOutput
}

IpsecServerIkeConfigInput is an input type that accepts IpsecServerIkeConfigArgs and IpsecServerIkeConfigOutput values. You can construct a concrete instance of `IpsecServerIkeConfigInput` via: 

IpsecServerIkeConfigArgs{...}

type IpsecServerIkeConfigOutput added in v3.20.0 

type IpsecServerIkeConfigOutput struct{ *pulumi.OutputState }

func (IpsecServerIkeConfigOutput) ElementType added in v3.20.0 

func (IpsecServerIkeConfigOutput) ElementType() reflect.Type

func (IpsecServerIkeConfigOutput) IkeAuthAlg added in v3.20.0 

func (o IpsecServerIkeConfigOutput) IkeAuthAlg() pulumi.StringPtrOutput

The authentication algorithm that is used in Phase 1 negotiations. Default value: `sha1`.

func (IpsecServerIkeConfigOutput) IkeEncAlg added in v3.20.0 

func (o IpsecServerIkeConfigOutput) IkeEncAlg() pulumi.StringPtrOutput

The encryption algorithm that is used in Phase 1 negotiations. Default value: `aes`.

func (IpsecServerIkeConfigOutput) IkeLifetime added in v3.20.0 

func (o IpsecServerIkeConfigOutput) IkeLifetime() pulumi.IntPtrOutput

IkeLifetime: the SA lifetime determined by Phase 1 negotiations. Valid values: `0` to `86400`. Default value: `86400`. Unit: `seconds`.

func (IpsecServerIkeConfigOutput) IkeMode added in v3.20.0 

func (o IpsecServerIkeConfigOutput) IkeMode() pulumi.StringPtrOutput

The IKE negotiation mode. Default value: `main`.

func (IpsecServerIkeConfigOutput) IkePfs added in v3.20.0 

func (o IpsecServerIkeConfigOutput) IkePfs() pulumi.StringPtrOutput

The Diffie-Hellman key exchange algorithm that is used in Phase 1 negotiations. Default value: `group2`.

func (IpsecServerIkeConfigOutput) IkeVersion added in v3.20.0 

func (o IpsecServerIkeConfigOutput) IkeVersion() pulumi.StringPtrOutput

The IKE version. Valid values: `ikev1` and `ikev2`. Default value: `ikev2`.

func (IpsecServerIkeConfigOutput) LocalId added in v3.20.0 

func (o IpsecServerIkeConfigOutput) LocalId() pulumi.StringPtrOutput

The identifier of the IPsec server. The value can be a fully qualified domain name (FQDN) or an IP address. The default value is the public IP address of the VPN gateway.

func (IpsecServerIkeConfigOutput) RemoteId added in v3.20.0 

func (o IpsecServerIkeConfigOutput) RemoteId() pulumi.StringPtrOutput

The identifier of the customer gateway. The value can be an FQDN or an IP address. By default, this parameter is not specified.

func (IpsecServerIkeConfigOutput) ToIpsecServerIkeConfigOutput added in v3.20.0 

func (o IpsecServerIkeConfigOutput) ToIpsecServerIkeConfigOutput() IpsecServerIkeConfigOutput

func (IpsecServerIkeConfigOutput) ToIpsecServerIkeConfigOutputWithContext added in v3.20.0 

func (o IpsecServerIkeConfigOutput) ToIpsecServerIkeConfigOutputWithContext(ctx context.Context) IpsecServerIkeConfigOutput

func (IpsecServerIkeConfigOutput) ToOutput added in v3.43.1 

func (o IpsecServerIkeConfigOutput) ToOutput(ctx context.Context) pulumix.Output[IpsecServerIkeConfig]

type IpsecServerInput added in v3.20.0 

type IpsecServerInput interface {
	pulumi.Input

	ToIpsecServerOutput() IpsecServerOutput
	ToIpsecServerOutputWithContext(ctx context.Context) IpsecServerOutput
}

type IpsecServerIpsecConfig added in v3.20.0 

type IpsecServerIpsecConfig struct {
	// The authentication algorithm that is used in Phase 2 negotiations. Default value: `sha1`.
	IpsecAuthAlg *string `pulumi:"ipsecAuthAlg"`
	// The encryption algorithm that is used in Phase 2 negotiations. Default value: `aes`.
	IpsecEncAlg *string `pulumi:"ipsecEncAlg"`
	// The SA lifetime determined by Phase 2 negotiations. Valid values: `0` to `86400`. Default value: `86400`. Unit: `seconds`.
	IpsecLifetime *int `pulumi:"ipsecLifetime"`
	// Forwards packets of all protocols. The Diffie-Hellman key exchange algorithm used in Phase 2 negotiations. Default value: `group2`.
	IpsecPfs *string `pulumi:"ipsecPfs"`
}

type IpsecServerIpsecConfigArgs added in v3.20.0 

type IpsecServerIpsecConfigArgs struct {
	// The authentication algorithm that is used in Phase 2 negotiations. Default value: `sha1`.
	IpsecAuthAlg pulumi.StringPtrInput `pulumi:"ipsecAuthAlg"`
	// The encryption algorithm that is used in Phase 2 negotiations. Default value: `aes`.
	IpsecEncAlg pulumi.StringPtrInput `pulumi:"ipsecEncAlg"`
	// The SA lifetime determined by Phase 2 negotiations. Valid values: `0` to `86400`. Default value: `86400`. Unit: `seconds`.
	IpsecLifetime pulumi.IntPtrInput `pulumi:"ipsecLifetime"`
	// Forwards packets of all protocols. The Diffie-Hellman key exchange algorithm used in Phase 2 negotiations. Default value: `group2`.
	IpsecPfs pulumi.StringPtrInput `pulumi:"ipsecPfs"`
}

func (IpsecServerIpsecConfigArgs) ElementType added in v3.20.0 

func (IpsecServerIpsecConfigArgs) ElementType() reflect.Type

func (IpsecServerIpsecConfigArgs) ToIpsecServerIpsecConfigOutput added in v3.20.0 

func (i IpsecServerIpsecConfigArgs) ToIpsecServerIpsecConfigOutput() IpsecServerIpsecConfigOutput

func (IpsecServerIpsecConfigArgs) ToIpsecServerIpsecConfigOutputWithContext added in v3.20.0 

func (i IpsecServerIpsecConfigArgs) ToIpsecServerIpsecConfigOutputWithContext(ctx context.Context) IpsecServerIpsecConfigOutput

func (IpsecServerIpsecConfigArgs) ToOutput added in v3.43.1 

func (i IpsecServerIpsecConfigArgs) ToOutput(ctx context.Context) pulumix.Output[IpsecServerIpsecConfig]

type IpsecServerIpsecConfigArray added in v3.20.0 

type IpsecServerIpsecConfigArray []IpsecServerIpsecConfigInput

func (IpsecServerIpsecConfigArray) ElementType added in v3.20.0 

func (IpsecServerIpsecConfigArray) ElementType() reflect.Type

func (IpsecServerIpsecConfigArray) ToIpsecServerIpsecConfigArrayOutput added in v3.20.0 

func (i IpsecServerIpsecConfigArray) ToIpsecServerIpsecConfigArrayOutput() IpsecServerIpsecConfigArrayOutput

func (IpsecServerIpsecConfigArray) ToIpsecServerIpsecConfigArrayOutputWithContext added in v3.20.0 

func (i IpsecServerIpsecConfigArray) ToIpsecServerIpsecConfigArrayOutputWithContext(ctx context.Context) IpsecServerIpsecConfigArrayOutput

func (IpsecServerIpsecConfigArray) ToOutput added in v3.43.1 

func (i IpsecServerIpsecConfigArray) ToOutput(ctx context.Context) pulumix.Output[[]IpsecServerIpsecConfig]

type IpsecServerIpsecConfigArrayInput added in v3.20.0 

type IpsecServerIpsecConfigArrayInput interface {
	pulumi.Input

	ToIpsecServerIpsecConfigArrayOutput() IpsecServerIpsecConfigArrayOutput
	ToIpsecServerIpsecConfigArrayOutputWithContext(context.Context) IpsecServerIpsecConfigArrayOutput
}

IpsecServerIpsecConfigArrayInput is an input type that accepts IpsecServerIpsecConfigArray and IpsecServerIpsecConfigArrayOutput values. You can construct a concrete instance of `IpsecServerIpsecConfigArrayInput` via: 

IpsecServerIpsecConfigArray{ IpsecServerIpsecConfigArgs{...} }

type IpsecServerIpsecConfigArrayOutput added in v3.20.0 

type IpsecServerIpsecConfigArrayOutput struct{ *pulumi.OutputState }

func (IpsecServerIpsecConfigArrayOutput) ElementType added in v3.20.0 

func (IpsecServerIpsecConfigArrayOutput) ElementType() reflect.Type

func (IpsecServerIpsecConfigArrayOutput) Index added in v3.20.0 

func (o IpsecServerIpsecConfigArrayOutput) Index(i pulumi.IntInput) IpsecServerIpsecConfigOutput

func (IpsecServerIpsecConfigArrayOutput) ToIpsecServerIpsecConfigArrayOutput added in v3.20.0 

func (o IpsecServerIpsecConfigArrayOutput) ToIpsecServerIpsecConfigArrayOutput() IpsecServerIpsecConfigArrayOutput

func (IpsecServerIpsecConfigArrayOutput) ToIpsecServerIpsecConfigArrayOutputWithContext added in v3.20.0 

func (o IpsecServerIpsecConfigArrayOutput) ToIpsecServerIpsecConfigArrayOutputWithContext(ctx context.Context) IpsecServerIpsecConfigArrayOutput

func (IpsecServerIpsecConfigArrayOutput) ToOutput added in v3.43.1 

func (o IpsecServerIpsecConfigArrayOutput) ToOutput(ctx context.Context) pulumix.Output[[]IpsecServerIpsecConfig]

type IpsecServerIpsecConfigInput added in v3.20.0 

type IpsecServerIpsecConfigInput interface {
	pulumi.Input

	ToIpsecServerIpsecConfigOutput() IpsecServerIpsecConfigOutput
	ToIpsecServerIpsecConfigOutputWithContext(context.Context) IpsecServerIpsecConfigOutput
}

IpsecServerIpsecConfigInput is an input type that accepts IpsecServerIpsecConfigArgs and IpsecServerIpsecConfigOutput values. You can construct a concrete instance of `IpsecServerIpsecConfigInput` via: 

IpsecServerIpsecConfigArgs{...}

type IpsecServerIpsecConfigOutput added in v3.20.0 

type IpsecServerIpsecConfigOutput struct{ *pulumi.OutputState }

func (IpsecServerIpsecConfigOutput) ElementType added in v3.20.0 

func (IpsecServerIpsecConfigOutput) ElementType() reflect.Type

func (IpsecServerIpsecConfigOutput) IpsecAuthAlg added in v3.20.0 

func (o IpsecServerIpsecConfigOutput) IpsecAuthAlg() pulumi.StringPtrOutput

The authentication algorithm that is used in Phase 2 negotiations. Default value: `sha1`.

func (IpsecServerIpsecConfigOutput) IpsecEncAlg added in v3.20.0 

func (o IpsecServerIpsecConfigOutput) IpsecEncAlg() pulumi.StringPtrOutput

The encryption algorithm that is used in Phase 2 negotiations. Default value: `aes`.

func (IpsecServerIpsecConfigOutput) IpsecLifetime added in v3.20.0 

func (o IpsecServerIpsecConfigOutput) IpsecLifetime() pulumi.IntPtrOutput

The SA lifetime determined by Phase 2 negotiations. Valid values: `0` to `86400`. Default value: `86400`. Unit: `seconds`.

func (IpsecServerIpsecConfigOutput) IpsecPfs added in v3.20.0 

func (o IpsecServerIpsecConfigOutput) IpsecPfs() pulumi.StringPtrOutput

Forwards packets of all protocols. The Diffie-Hellman key exchange algorithm used in Phase 2 negotiations. Default value: `group2`.

func (IpsecServerIpsecConfigOutput) ToIpsecServerIpsecConfigOutput added in v3.20.0 

func (o IpsecServerIpsecConfigOutput) ToIpsecServerIpsecConfigOutput() IpsecServerIpsecConfigOutput

func (IpsecServerIpsecConfigOutput) ToIpsecServerIpsecConfigOutputWithContext added in v3.20.0 

func (o IpsecServerIpsecConfigOutput) ToIpsecServerIpsecConfigOutputWithContext(ctx context.Context) IpsecServerIpsecConfigOutput

func (IpsecServerIpsecConfigOutput) ToOutput added in v3.43.1 

func (o IpsecServerIpsecConfigOutput) ToOutput(ctx context.Context) pulumix.Output[IpsecServerIpsecConfig]

type IpsecServerMap added in v3.20.0 

type IpsecServerMap map[string]IpsecServerInput

func (IpsecServerMap) ElementType added in v3.20.0 

func (IpsecServerMap) ElementType() reflect.Type

func (IpsecServerMap) ToIpsecServerMapOutput added in v3.20.0 

func (i IpsecServerMap) ToIpsecServerMapOutput() IpsecServerMapOutput

func (IpsecServerMap) ToIpsecServerMapOutputWithContext added in v3.20.0 

func (i IpsecServerMap) ToIpsecServerMapOutputWithContext(ctx context.Context) IpsecServerMapOutput

func (IpsecServerMap) ToOutput added in v3.43.1 

func (i IpsecServerMap) ToOutput(ctx context.Context) pulumix.Output[map[string]*IpsecServer]

type IpsecServerMapInput added in v3.20.0 

type IpsecServerMapInput interface {
	pulumi.Input

	ToIpsecServerMapOutput() IpsecServerMapOutput
	ToIpsecServerMapOutputWithContext(context.Context) IpsecServerMapOutput
}

IpsecServerMapInput is an input type that accepts IpsecServerMap and IpsecServerMapOutput values. You can construct a concrete instance of `IpsecServerMapInput` via: 

IpsecServerMap{ "key": IpsecServerArgs{...} }

type IpsecServerMapOutput added in v3.20.0 

type IpsecServerMapOutput struct{ *pulumi.OutputState }

func (IpsecServerMapOutput) ElementType added in v3.20.0 

func (IpsecServerMapOutput) ElementType() reflect.Type

func (IpsecServerMapOutput) MapIndex added in v3.20.0 

func (o IpsecServerMapOutput) MapIndex(k pulumi.StringInput) IpsecServerOutput

func (IpsecServerMapOutput) ToIpsecServerMapOutput added in v3.20.0 

func (o IpsecServerMapOutput) ToIpsecServerMapOutput() IpsecServerMapOutput

func (IpsecServerMapOutput) ToIpsecServerMapOutputWithContext added in v3.20.0 

func (o IpsecServerMapOutput) ToIpsecServerMapOutputWithContext(ctx context.Context) IpsecServerMapOutput

func (IpsecServerMapOutput) ToOutput added in v3.43.1 

func (o IpsecServerMapOutput) ToOutput(ctx context.Context) pulumix.Output[map[string]*IpsecServer]

type IpsecServerOutput added in v3.20.0 

type IpsecServerOutput struct{ *pulumi.OutputState }

func (IpsecServerOutput) ClientIpPool added in v3.27.0 

func (o IpsecServerOutput) ClientIpPool() pulumi.StringOutput

The client CIDR block. It refers to the CIDR block that is allocated to the virtual interface of the client.

func (IpsecServerOutput) DryRun added in v3.27.0 

func (o IpsecServerOutput) DryRun() pulumi.BoolPtrOutput

The dry run.

func (IpsecServerOutput) EffectImmediately added in v3.27.0 

func (o IpsecServerOutput) EffectImmediately() pulumi.BoolPtrOutput

Specifies whether you want the configuration to immediately take effect.

func (IpsecServerOutput) ElementType added in v3.20.0 

func (IpsecServerOutput) ElementType() reflect.Type

func (IpsecServerOutput) IkeConfigs added in v3.27.0 

func (o IpsecServerOutput) IkeConfigs() IpsecServerIkeConfigArrayOutput

The configuration of Phase 1 negotiations. See the following `Block ikeConfig`.

func (IpsecServerOutput) IpsecConfigs added in v3.27.0 

func (o IpsecServerOutput) IpsecConfigs() IpsecServerIpsecConfigArrayOutput

The configuration of Phase 2 negotiations. See the following `Block ipsecConfig`.

func (IpsecServerOutput) IpsecServerName added in v3.27.0 

func (o IpsecServerOutput) IpsecServerName() pulumi.StringPtrOutput

The name of the IPsec server. The name must be `2` to `128` characters in length, and can contain digits, hyphens (-), and underscores (_). It must start with a letter.

func (IpsecServerOutput) LocalSubnet added in v3.27.0 

func (o IpsecServerOutput) LocalSubnet() pulumi.StringOutput

The local CIDR block. It refers to the CIDR block of the virtual private cloud (VPC) that is used to connect with the client. Separate multiple CIDR blocks with commas (,). Example: `192.168.1.0/24,192.168.2.0/24`.

func (IpsecServerOutput) Psk added in v3.27.0 

func (o IpsecServerOutput) Psk() pulumi.StringOutput

The pre-shared key. The pre-shared key is used to authenticate the VPN gateway and the client. By default, the system generates a random string that is 16 bits in length. You can also specify the pre-shared key. It can contain at most 100 characters.

func (IpsecServerOutput) PskEnabled added in v3.27.0 

func (o IpsecServerOutput) PskEnabled() pulumi.BoolPtrOutput

Whether to enable the pre-shared key authentication method. The value is only `true`, which indicates that the pre-shared key authentication method is enabled.

func (IpsecServerOutput) ToIpsecServerOutput added in v3.20.0 

func (o IpsecServerOutput) ToIpsecServerOutput() IpsecServerOutput

func (IpsecServerOutput) ToIpsecServerOutputWithContext added in v3.20.0 

func (o IpsecServerOutput) ToIpsecServerOutputWithContext(ctx context.Context) IpsecServerOutput

func (IpsecServerOutput) ToOutput added in v3.43.1 

func (o IpsecServerOutput) ToOutput(ctx context.Context) pulumix.Output[*IpsecServer]

func (IpsecServerOutput) VpnGatewayId added in v3.27.0 

func (o IpsecServerOutput) VpnGatewayId() pulumi.StringOutput

The ID of the VPN gateway.

type IpsecServerState added in v3.20.0 

type IpsecServerState struct {
	// The client CIDR block. It refers to the CIDR block that is allocated to the virtual interface of the client.
	ClientIpPool pulumi.StringPtrInput
	// The dry run.
	DryRun pulumi.BoolPtrInput
	// Specifies whether you want the configuration to immediately take effect.
	EffectImmediately pulumi.BoolPtrInput
	// The configuration of Phase 1 negotiations. See the following `Block ikeConfig`.
	IkeConfigs IpsecServerIkeConfigArrayInput
	// The configuration of Phase 2 negotiations. See the following `Block ipsecConfig`.
	IpsecConfigs IpsecServerIpsecConfigArrayInput
	// The name of the IPsec server. The name must be `2` to `128` characters in length, and can contain digits, hyphens (-), and underscores (_). It must start with a letter.
	IpsecServerName pulumi.StringPtrInput
	// The local CIDR block. It refers to the CIDR block of the virtual private cloud (VPC) that is used to connect with the client. Separate multiple CIDR blocks with commas (,). Example: `192.168.1.0/24,192.168.2.0/24`.
	LocalSubnet pulumi.StringPtrInput
	// The pre-shared key. The pre-shared key is used to authenticate the VPN gateway and the client. By default, the system generates a random string that is 16 bits in length. You can also specify the pre-shared key. It can contain at most 100 characters.
	Psk pulumi.StringPtrInput
	// Whether to enable the pre-shared key authentication method. The value is only `true`, which indicates that the pre-shared key authentication method is enabled.
	PskEnabled pulumi.BoolPtrInput
	// The ID of the VPN gateway.
	VpnGatewayId pulumi.StringPtrInput
}

func (IpsecServerState) ElementType added in v3.20.0 

func (IpsecServerState) ElementType() reflect.Type

type PbrRouteEntry added in v3.20.0 

type PbrRouteEntry struct {
	pulumi.CustomResourceState

	// The next hop of the policy-based route.
	NextHop pulumi.StringOutput `pulumi:"nextHop"`
	// Whether to issue the destination route to the VPC.
	PublishVpc pulumi.BoolOutput `pulumi:"publishVpc"`
	// The destination CIDR block of the policy-based route.
	RouteDest pulumi.StringOutput `pulumi:"routeDest"`
	// The source CIDR block of the policy-based route.
	RouteSource pulumi.StringOutput `pulumi:"routeSource"`
	// The status of the vpn pbr route entry.
	Status pulumi.StringOutput `pulumi:"status"`
	// The ID of the vpn gateway.
	VpnGatewayId pulumi.StringOutput `pulumi:"vpnGatewayId"`
	// The weight of the policy-based route. Valid values: 0 and 100.
	Weight pulumi.IntOutput `pulumi:"weight"`
}

Provides a VPN Pbr Route Entry resource.

> **NOTE:** Available in 1.162.0+.

For information about VPN Pbr Route Entry and how to use it, see [What is VPN Pbr Route Entry](https://www.alibabacloud.com/help/en/doc-detail/127248.html).

## Example Usage

Basic Usage

```go package main

import ( 

"github.com/pulumi/pulumi-alicloud/sdk/v3/go/alicloud/vpn"
"github.com/pulumi/pulumi/sdk/v3/go/pulumi"
"github.com/pulumi/pulumi/sdk/v3/go/pulumi/config"

) 

func main() {
	pulumi.Run(func(ctx *pulumi.Context) error {
		cfg := config.New(ctx, "")
		name := "tfacc"
		if param := cfg.Get("name"); param != "" {
			name = param
		}
		defaultGateways, err := vpn.GetGateways(ctx, nil, nil)
		if err != nil {
			return err
		}
		defaultCustomerGateway, err := vpn.NewCustomerGateway(ctx, "defaultCustomerGateway", &vpn.CustomerGatewayArgs{
			IpAddress: pulumi.String("192.168.1.1"),
		})
		if err != nil {
			return err
		}
		defaultConnection, err := vpn.NewConnection(ctx, "defaultConnection", &vpn.ConnectionArgs{
			CustomerGatewayId: defaultCustomerGateway.ID(),
			VpnGatewayId:      *pulumi.String(defaultGateways.Ids[0]),
			LocalSubnets: pulumi.StringArray{
				pulumi.String("192.168.2.0/24"),
			},
			RemoteSubnets: pulumi.StringArray{
				pulumi.String("192.168.3.0/24"),
			},
		})
		if err != nil {
			return err
		}
		_, err = vpn.NewPbrRouteEntry(ctx, "defaultPbrRouteEntry", &vpn.PbrRouteEntryArgs{
			VpnGatewayId: *pulumi.String(defaultGateways.Ids[0]),
			RouteSource:  pulumi.String("192.168.1.0/24"),
			RouteDest:    pulumi.String("10.0.0.0/24"),
			NextHop:      defaultConnection.ID(),
			Weight:       pulumi.Int(0),
			PublishVpc:   pulumi.Bool(false),
		})
		if err != nil {
			return err
		}
		return nil
	})
}

```

## Import

VPN Pbr route entry can be imported using the id, e.g.

```sh 

$ pulumi import alicloud:vpn/pbrRouteEntry:PbrRouteEntry example <vpn_gateway_id>:<next_hop>:<route_source>:<route_dest>

```

func GetPbrRouteEntry added in v3.20.0 

func GetPbrRouteEntry(ctx *pulumi.Context,
	name string, id pulumi.IDInput, state *PbrRouteEntryState, opts ...pulumi.ResourceOption) (*PbrRouteEntry, error)

GetPbrRouteEntry gets an existing PbrRouteEntry resource's state with the given name, ID, and optional state properties that are used to uniquely qualify the lookup (nil if not required).

func NewPbrRouteEntry added in v3.20.0 

func NewPbrRouteEntry(ctx *pulumi.Context,
	name string, args *PbrRouteEntryArgs, opts ...pulumi.ResourceOption) (*PbrRouteEntry, error)

NewPbrRouteEntry registers a new resource with the given unique name, arguments, and options.

func (*PbrRouteEntry) ElementType added in v3.20.0 

func (*PbrRouteEntry) ElementType() reflect.Type

func (*PbrRouteEntry) ToOutput added in v3.43.1 

func (i *PbrRouteEntry) ToOutput(ctx context.Context) pulumix.Output[*PbrRouteEntry]

func (*PbrRouteEntry) ToPbrRouteEntryOutput added in v3.20.0 

func (i *PbrRouteEntry) ToPbrRouteEntryOutput() PbrRouteEntryOutput

func (*PbrRouteEntry) ToPbrRouteEntryOutputWithContext added in v3.20.0 

func (i *PbrRouteEntry) ToPbrRouteEntryOutputWithContext(ctx context.Context) PbrRouteEntryOutput

type PbrRouteEntryArgs added in v3.20.0 

type PbrRouteEntryArgs struct {
	// The next hop of the policy-based route.
	NextHop pulumi.StringInput
	// Whether to issue the destination route to the VPC.
	PublishVpc pulumi.BoolInput
	// The destination CIDR block of the policy-based route.
	RouteDest pulumi.StringInput
	// The source CIDR block of the policy-based route.
	RouteSource pulumi.StringInput
	// The ID of the vpn gateway.
	VpnGatewayId pulumi.StringInput
	// The weight of the policy-based route. Valid values: 0 and 100.
	Weight pulumi.IntInput
}

The set of arguments for constructing a PbrRouteEntry resource.

func (PbrRouteEntryArgs) ElementType added in v3.20.0 

func (PbrRouteEntryArgs) ElementType() reflect.Type

type PbrRouteEntryArray added in v3.20.0 

type PbrRouteEntryArray []PbrRouteEntryInput

func (PbrRouteEntryArray) ElementType added in v3.20.0 

func (PbrRouteEntryArray) ElementType() reflect.Type

func (PbrRouteEntryArray) ToOutput added in v3.43.1 

func (i PbrRouteEntryArray) ToOutput(ctx context.Context) pulumix.Output[[]*PbrRouteEntry]

func (PbrRouteEntryArray) ToPbrRouteEntryArrayOutput added in v3.20.0 

func (i PbrRouteEntryArray) ToPbrRouteEntryArrayOutput() PbrRouteEntryArrayOutput

func (PbrRouteEntryArray) ToPbrRouteEntryArrayOutputWithContext added in v3.20.0 

func (i PbrRouteEntryArray) ToPbrRouteEntryArrayOutputWithContext(ctx context.Context) PbrRouteEntryArrayOutput

type PbrRouteEntryArrayInput added in v3.20.0 

type PbrRouteEntryArrayInput interface {
	pulumi.Input

	ToPbrRouteEntryArrayOutput() PbrRouteEntryArrayOutput
	ToPbrRouteEntryArrayOutputWithContext(context.Context) PbrRouteEntryArrayOutput
}

PbrRouteEntryArrayInput is an input type that accepts PbrRouteEntryArray and PbrRouteEntryArrayOutput values. You can construct a concrete instance of `PbrRouteEntryArrayInput` via: 

PbrRouteEntryArray{ PbrRouteEntryArgs{...} }

type PbrRouteEntryArrayOutput added in v3.20.0 

type PbrRouteEntryArrayOutput struct{ *pulumi.OutputState }

func (PbrRouteEntryArrayOutput) ElementType added in v3.20.0 

func (PbrRouteEntryArrayOutput) ElementType() reflect.Type

func (PbrRouteEntryArrayOutput) Index added in v3.20.0 

func (o PbrRouteEntryArrayOutput) Index(i pulumi.IntInput) PbrRouteEntryOutput

func (PbrRouteEntryArrayOutput) ToOutput added in v3.43.1 

func (o PbrRouteEntryArrayOutput) ToOutput(ctx context.Context) pulumix.Output[[]*PbrRouteEntry]

func (PbrRouteEntryArrayOutput) ToPbrRouteEntryArrayOutput added in v3.20.0 

func (o PbrRouteEntryArrayOutput) ToPbrRouteEntryArrayOutput() PbrRouteEntryArrayOutput

func (PbrRouteEntryArrayOutput) ToPbrRouteEntryArrayOutputWithContext added in v3.20.0 

func (o PbrRouteEntryArrayOutput) ToPbrRouteEntryArrayOutputWithContext(ctx context.Context) PbrRouteEntryArrayOutput

type PbrRouteEntryInput added in v3.20.0 

type PbrRouteEntryInput interface {
	pulumi.Input

	ToPbrRouteEntryOutput() PbrRouteEntryOutput
	ToPbrRouteEntryOutputWithContext(ctx context.Context) PbrRouteEntryOutput
}

type PbrRouteEntryMap added in v3.20.0 

type PbrRouteEntryMap map[string]PbrRouteEntryInput

func (PbrRouteEntryMap) ElementType added in v3.20.0 

func (PbrRouteEntryMap) ElementType() reflect.Type

func (PbrRouteEntryMap) ToOutput added in v3.43.1 

func (i PbrRouteEntryMap) ToOutput(ctx context.Context) pulumix.Output[map[string]*PbrRouteEntry]

func (PbrRouteEntryMap) ToPbrRouteEntryMapOutput added in v3.20.0 

func (i PbrRouteEntryMap) ToPbrRouteEntryMapOutput() PbrRouteEntryMapOutput

func (PbrRouteEntryMap) ToPbrRouteEntryMapOutputWithContext added in v3.20.0 

func (i PbrRouteEntryMap) ToPbrRouteEntryMapOutputWithContext(ctx context.Context) PbrRouteEntryMapOutput

type PbrRouteEntryMapInput added in v3.20.0 

type PbrRouteEntryMapInput interface {
	pulumi.Input

	ToPbrRouteEntryMapOutput() PbrRouteEntryMapOutput
	ToPbrRouteEntryMapOutputWithContext(context.Context) PbrRouteEntryMapOutput
}

PbrRouteEntryMapInput is an input type that accepts PbrRouteEntryMap and PbrRouteEntryMapOutput values. You can construct a concrete instance of `PbrRouteEntryMapInput` via: 

PbrRouteEntryMap{ "key": PbrRouteEntryArgs{...} }

type PbrRouteEntryMapOutput added in v3.20.0 

type PbrRouteEntryMapOutput struct{ *pulumi.OutputState }

func (PbrRouteEntryMapOutput) ElementType added in v3.20.0 

func (PbrRouteEntryMapOutput) ElementType() reflect.Type

func (PbrRouteEntryMapOutput) MapIndex added in v3.20.0 

func (o PbrRouteEntryMapOutput) MapIndex(k pulumi.StringInput) PbrRouteEntryOutput

func (PbrRouteEntryMapOutput) ToOutput added in v3.43.1 

func (o PbrRouteEntryMapOutput) ToOutput(ctx context.Context) pulumix.Output[map[string]*PbrRouteEntry]

func (PbrRouteEntryMapOutput) ToPbrRouteEntryMapOutput added in v3.20.0 

func (o PbrRouteEntryMapOutput) ToPbrRouteEntryMapOutput() PbrRouteEntryMapOutput

func (PbrRouteEntryMapOutput) ToPbrRouteEntryMapOutputWithContext added in v3.20.0 

func (o PbrRouteEntryMapOutput) ToPbrRouteEntryMapOutputWithContext(ctx context.Context) PbrRouteEntryMapOutput

type PbrRouteEntryOutput added in v3.20.0 

type PbrRouteEntryOutput struct{ *pulumi.OutputState }

func (PbrRouteEntryOutput) ElementType added in v3.20.0 

func (PbrRouteEntryOutput) ElementType() reflect.Type

func (PbrRouteEntryOutput) NextHop added in v3.27.0 

func (o PbrRouteEntryOutput) NextHop() pulumi.StringOutput

The next hop of the policy-based route.

func (PbrRouteEntryOutput) PublishVpc added in v3.27.0 

func (o PbrRouteEntryOutput) PublishVpc() pulumi.BoolOutput

Whether to issue the destination route to the VPC.

func (PbrRouteEntryOutput) RouteDest added in v3.27.0 

func (o PbrRouteEntryOutput) RouteDest() pulumi.StringOutput

The destination CIDR block of the policy-based route.

func (PbrRouteEntryOutput) RouteSource added in v3.27.0 

func (o PbrRouteEntryOutput) RouteSource() pulumi.StringOutput

The source CIDR block of the policy-based route.

func (PbrRouteEntryOutput) Status added in v3.27.0 

func (o PbrRouteEntryOutput) Status() pulumi.StringOutput

The status of the vpn pbr route entry.

func (PbrRouteEntryOutput) ToOutput added in v3.43.1 

func (o PbrRouteEntryOutput) ToOutput(ctx context.Context) pulumix.Output[*PbrRouteEntry]

func (PbrRouteEntryOutput) ToPbrRouteEntryOutput added in v3.20.0 

func (o PbrRouteEntryOutput) ToPbrRouteEntryOutput() PbrRouteEntryOutput

func (PbrRouteEntryOutput) ToPbrRouteEntryOutputWithContext added in v3.20.0 

func (o PbrRouteEntryOutput) ToPbrRouteEntryOutputWithContext(ctx context.Context) PbrRouteEntryOutput

func (PbrRouteEntryOutput) VpnGatewayId added in v3.27.0 

func (o PbrRouteEntryOutput) VpnGatewayId() pulumi.StringOutput

The ID of the vpn gateway.

func (PbrRouteEntryOutput) Weight added in v3.27.0 

func (o PbrRouteEntryOutput) Weight() pulumi.IntOutput

The weight of the policy-based route. Valid values: 0 and 100.

type PbrRouteEntryState added in v3.20.0 

type PbrRouteEntryState struct {
	// The next hop of the policy-based route.
	NextHop pulumi.StringPtrInput
	// Whether to issue the destination route to the VPC.
	PublishVpc pulumi.BoolPtrInput
	// The destination CIDR block of the policy-based route.
	RouteDest pulumi.StringPtrInput
	// The source CIDR block of the policy-based route.
	RouteSource pulumi.StringPtrInput
	// The status of the vpn pbr route entry.
	Status pulumi.StringPtrInput
	// The ID of the vpn gateway.
	VpnGatewayId pulumi.StringPtrInput
	// The weight of the policy-based route. Valid values: 0 and 100.
	Weight pulumi.IntPtrInput
}

func (PbrRouteEntryState) ElementType added in v3.20.0 

func (PbrRouteEntryState) ElementType() reflect.Type

type RouteEntry 

type RouteEntry struct {
	pulumi.CustomResourceState

	// The next hop of the destination route.
	NextHop pulumi.StringOutput `pulumi:"nextHop"`
	// Whether to issue the destination route to the VPC.
	PublishVpc pulumi.BoolOutput `pulumi:"publishVpc"`
	// The destination network segment of the destination route.
	RouteDest pulumi.StringOutput `pulumi:"routeDest"`
	// (Available in 1.161.0+) The type of the vpn route entry.
	RouteEntryType pulumi.StringOutput `pulumi:"routeEntryType"`
	// (Available in 1.161.0+) The status of the vpn route entry.
	Status pulumi.StringOutput `pulumi:"status"`
	// The id of the vpn gateway.
	VpnGatewayId pulumi.StringOutput `pulumi:"vpnGatewayId"`
	// The value should be 0 or 100.
	Weight pulumi.IntOutput `pulumi:"weight"`
}

## Example Usage

Basic Usage

```go package main

import ( 

"github.com/pulumi/pulumi-alicloud/sdk/v3/go/alicloud"
"github.com/pulumi/pulumi-alicloud/sdk/v3/go/alicloud/vpc"
"github.com/pulumi/pulumi-alicloud/sdk/v3/go/alicloud/vpn"
"github.com/pulumi/pulumi/sdk/v3/go/pulumi"

) 

func main() {
	pulumi.Run(func(ctx *pulumi.Context) error {
		defaultZones, err := alicloud.GetZones(ctx, &alicloud.GetZonesArgs{
			AvailableDiskCategory:     pulumi.StringRef("cloud_efficiency"),
			AvailableResourceCreation: pulumi.StringRef("VSwitch"),
		}, nil)
		if err != nil {
			return err
		}
		defaultNetwork, err := vpc.NewNetwork(ctx, "defaultNetwork", &vpc.NetworkArgs{
			VpcName:   pulumi.String("terraform-example"),
			CidrBlock: pulumi.String("10.1.0.0/21"),
		})
		if err != nil {
			return err
		}
		defaultSwitch, err := vpc.NewSwitch(ctx, "defaultSwitch", &vpc.SwitchArgs{
			VswitchName: pulumi.String("terraform-example"),
			VpcId:       defaultNetwork.ID(),
			CidrBlock:   pulumi.String("10.1.0.0/24"),
			ZoneId:      *pulumi.String(defaultZones.Zones[0].Id),
		})
		if err != nil {
			return err
		}
		defaultGateway, err := vpn.NewGateway(ctx, "defaultGateway", &vpn.GatewayArgs{
			VpcId:              defaultNetwork.ID(),
			Bandwidth:          pulumi.Int(10),
			InstanceChargeType: pulumi.String("PrePaid"),
			EnableSsl:          pulumi.Bool(false),
			VswitchId:          defaultSwitch.ID(),
		})
		if err != nil {
			return err
		}
		defaultCustomerGateway, err := vpn.NewCustomerGateway(ctx, "defaultCustomerGateway", &vpn.CustomerGatewayArgs{
			IpAddress: pulumi.String("192.168.1.1"),
		})
		if err != nil {
			return err
		}
		defaultConnection, err := vpn.NewConnection(ctx, "defaultConnection", &vpn.ConnectionArgs{
			CustomerGatewayId: defaultCustomerGateway.ID(),
			VpnGatewayId:      defaultGateway.ID(),
			LocalSubnets: pulumi.StringArray{
				pulumi.String("192.168.2.0/24"),
			},
			RemoteSubnets: pulumi.StringArray{
				pulumi.String("192.168.3.0/24"),
			},
		})
		if err != nil {
			return err
		}
		_, err = vpn.NewRouteEntry(ctx, "defaultRouteEntry", &vpn.RouteEntryArgs{
			VpnGatewayId: defaultGateway.ID(),
			RouteDest:    pulumi.String("10.0.0.0/24"),
			NextHop:      defaultConnection.ID(),
			Weight:       pulumi.Int(0),
			PublishVpc:   pulumi.Bool(false),
		})
		if err != nil {
			return err
		}
		return nil
	})
}

```

## Import

VPN route entry can be imported using the id(VpnGatewayId +":"+ NextHop +":"+ RouteDest), e.g.

```sh 

$ pulumi import alicloud:vpn/routeEntry:RouteEntry example vpn-abc123456:vco-abc123456:10.0.0.10/24

```

func GetRouteEntry 

func GetRouteEntry(ctx *pulumi.Context,
	name string, id pulumi.IDInput, state *RouteEntryState, opts ...pulumi.ResourceOption) (*RouteEntry, error)

GetRouteEntry gets an existing RouteEntry resource's state with the given name, ID, and optional state properties that are used to uniquely qualify the lookup (nil if not required).

func NewRouteEntry 

func NewRouteEntry(ctx *pulumi.Context,
	name string, args *RouteEntryArgs, opts ...pulumi.ResourceOption) (*RouteEntry, error)

NewRouteEntry registers a new resource with the given unique name, arguments, and options.

func (*RouteEntry) ElementType 

func (*RouteEntry) ElementType() reflect.Type

func (*RouteEntry) ToOutput added in v3.43.1 

func (i *RouteEntry) ToOutput(ctx context.Context) pulumix.Output[*RouteEntry]

func (*RouteEntry) ToRouteEntryOutput 

func (i *RouteEntry) ToRouteEntryOutput() RouteEntryOutput

func (*RouteEntry) ToRouteEntryOutputWithContext 

func (i *RouteEntry) ToRouteEntryOutputWithContext(ctx context.Context) RouteEntryOutput

type RouteEntryArgs 

type RouteEntryArgs struct {
	// The next hop of the destination route.
	NextHop pulumi.StringInput
	// Whether to issue the destination route to the VPC.
	PublishVpc pulumi.BoolInput
	// The destination network segment of the destination route.
	RouteDest pulumi.StringInput
	// The id of the vpn gateway.
	VpnGatewayId pulumi.StringInput
	// The value should be 0 or 100.
	Weight pulumi.IntInput
}

The set of arguments for constructing a RouteEntry resource.

func (RouteEntryArgs) ElementType 

func (RouteEntryArgs) ElementType() reflect.Type

type RouteEntryArray 

type RouteEntryArray []RouteEntryInput

func (RouteEntryArray) ElementType 

func (RouteEntryArray) ElementType() reflect.Type

func (RouteEntryArray) ToOutput added in v3.43.1 

func (i RouteEntryArray) ToOutput(ctx context.Context) pulumix.Output[[]*RouteEntry]

func (RouteEntryArray) ToRouteEntryArrayOutput 

func (i RouteEntryArray) ToRouteEntryArrayOutput() RouteEntryArrayOutput

func (RouteEntryArray) ToRouteEntryArrayOutputWithContext 

func (i RouteEntryArray) ToRouteEntryArrayOutputWithContext(ctx context.Context) RouteEntryArrayOutput

type RouteEntryArrayInput 

type RouteEntryArrayInput interface {
	pulumi.Input

	ToRouteEntryArrayOutput() RouteEntryArrayOutput
	ToRouteEntryArrayOutputWithContext(context.Context) RouteEntryArrayOutput
}

RouteEntryArrayInput is an input type that accepts RouteEntryArray and RouteEntryArrayOutput values. You can construct a concrete instance of `RouteEntryArrayInput` via: 

RouteEntryArray{ RouteEntryArgs{...} }

type RouteEntryArrayOutput 

type RouteEntryArrayOutput struct{ *pulumi.OutputState }

func (RouteEntryArrayOutput) ElementType 

func (RouteEntryArrayOutput) ElementType() reflect.Type

func (RouteEntryArrayOutput) Index 

func (o RouteEntryArrayOutput) Index(i pulumi.IntInput) RouteEntryOutput

func (RouteEntryArrayOutput) ToOutput added in v3.43.1 

func (o RouteEntryArrayOutput) ToOutput(ctx context.Context) pulumix.Output[[]*RouteEntry]

func (RouteEntryArrayOutput) ToRouteEntryArrayOutput 

func (o RouteEntryArrayOutput) ToRouteEntryArrayOutput() RouteEntryArrayOutput

func (RouteEntryArrayOutput) ToRouteEntryArrayOutputWithContext 

func (o RouteEntryArrayOutput) ToRouteEntryArrayOutputWithContext(ctx context.Context) RouteEntryArrayOutput

type RouteEntryInput 

type RouteEntryInput interface {
	pulumi.Input

	ToRouteEntryOutput() RouteEntryOutput
	ToRouteEntryOutputWithContext(ctx context.Context) RouteEntryOutput
}

type RouteEntryMap 

type RouteEntryMap map[string]RouteEntryInput

func (RouteEntryMap) ElementType 

func (RouteEntryMap) ElementType() reflect.Type

func (RouteEntryMap) ToOutput added in v3.43.1 

func (i RouteEntryMap) ToOutput(ctx context.Context) pulumix.Output[map[string]*RouteEntry]

func (RouteEntryMap) ToRouteEntryMapOutput 

func (i RouteEntryMap) ToRouteEntryMapOutput() RouteEntryMapOutput

func (RouteEntryMap) ToRouteEntryMapOutputWithContext 

func (i RouteEntryMap) ToRouteEntryMapOutputWithContext(ctx context.Context) RouteEntryMapOutput

type RouteEntryMapInput 

type RouteEntryMapInput interface {
	pulumi.Input

	ToRouteEntryMapOutput() RouteEntryMapOutput
	ToRouteEntryMapOutputWithContext(context.Context) RouteEntryMapOutput
}

RouteEntryMapInput is an input type that accepts RouteEntryMap and RouteEntryMapOutput values. You can construct a concrete instance of `RouteEntryMapInput` via: 

RouteEntryMap{ "key": RouteEntryArgs{...} }

type RouteEntryMapOutput 

type RouteEntryMapOutput struct{ *pulumi.OutputState }

func (RouteEntryMapOutput) ElementType 

func (RouteEntryMapOutput) ElementType() reflect.Type

func (RouteEntryMapOutput) MapIndex 

func (o RouteEntryMapOutput) MapIndex(k pulumi.StringInput) RouteEntryOutput

func (RouteEntryMapOutput) ToOutput added in v3.43.1 

func (o RouteEntryMapOutput) ToOutput(ctx context.Context) pulumix.Output[map[string]*RouteEntry]

func (RouteEntryMapOutput) ToRouteEntryMapOutput 

func (o RouteEntryMapOutput) ToRouteEntryMapOutput() RouteEntryMapOutput

func (RouteEntryMapOutput) ToRouteEntryMapOutputWithContext 

func (o RouteEntryMapOutput) ToRouteEntryMapOutputWithContext(ctx context.Context) RouteEntryMapOutput

type RouteEntryOutput 

type RouteEntryOutput struct{ *pulumi.OutputState }

func (RouteEntryOutput) ElementType 

func (RouteEntryOutput) ElementType() reflect.Type

func (RouteEntryOutput) NextHop added in v3.27.0 

func (o RouteEntryOutput) NextHop() pulumi.StringOutput

The next hop of the destination route.

func (RouteEntryOutput) PublishVpc added in v3.27.0 

func (o RouteEntryOutput) PublishVpc() pulumi.BoolOutput

Whether to issue the destination route to the VPC.

func (RouteEntryOutput) RouteDest added in v3.27.0 

func (o RouteEntryOutput) RouteDest() pulumi.StringOutput

The destination network segment of the destination route.

func (RouteEntryOutput) RouteEntryType added in v3.27.0 

func (o RouteEntryOutput) RouteEntryType() pulumi.StringOutput

(Available in 1.161.0+) The type of the vpn route entry.

func (RouteEntryOutput) Status added in v3.27.0 

func (o RouteEntryOutput) Status() pulumi.StringOutput

(Available in 1.161.0+) The status of the vpn route entry.

func (RouteEntryOutput) ToOutput added in v3.43.1 

func (o RouteEntryOutput) ToOutput(ctx context.Context) pulumix.Output[*RouteEntry]

func (RouteEntryOutput) ToRouteEntryOutput 

func (o RouteEntryOutput) ToRouteEntryOutput() RouteEntryOutput

func (RouteEntryOutput) ToRouteEntryOutputWithContext 

func (o RouteEntryOutput) ToRouteEntryOutputWithContext(ctx context.Context) RouteEntryOutput

func (RouteEntryOutput) VpnGatewayId added in v3.27.0 

func (o RouteEntryOutput) VpnGatewayId() pulumi.StringOutput

The id of the vpn gateway.

func (RouteEntryOutput) Weight added in v3.27.0 

func (o RouteEntryOutput) Weight() pulumi.IntOutput

The value should be 0 or 100.

type RouteEntryState 

type RouteEntryState struct {
	// The next hop of the destination route.
	NextHop pulumi.StringPtrInput
	// Whether to issue the destination route to the VPC.
	PublishVpc pulumi.BoolPtrInput
	// The destination network segment of the destination route.
	RouteDest pulumi.StringPtrInput
	// (Available in 1.161.0+) The type of the vpn route entry.
	RouteEntryType pulumi.StringPtrInput
	// (Available in 1.161.0+) The status of the vpn route entry.
	Status pulumi.StringPtrInput
	// The id of the vpn gateway.
	VpnGatewayId pulumi.StringPtrInput
	// The value should be 0 or 100.
	Weight pulumi.IntPtrInput
}

func (RouteEntryState) ElementType 

func (RouteEntryState) ElementType() reflect.Type

type SslVpnClientCert 

type SslVpnClientCert struct {
	pulumi.CustomResourceState

	// The client ca cert.
	CaCert pulumi.StringOutput `pulumi:"caCert"`
	// The client cert.
	ClientCert pulumi.StringOutput `pulumi:"clientCert"`
	// The vpn client config.
	ClientConfig pulumi.StringOutput `pulumi:"clientConfig"`
	// The client key.
	ClientKey pulumi.StringOutput `pulumi:"clientKey"`
	// The name of the client certificate.
	Name pulumi.StringOutput `pulumi:"name"`
	// The ID of the SSL-VPN server.
	SslVpnServerId pulumi.StringOutput `pulumi:"sslVpnServerId"`
	// The status of the client certificate.
	Status pulumi.StringOutput `pulumi:"status"`
}

## Import

SSL-VPN client certificates can be imported using the id, e.g.

```sh 

$ pulumi import alicloud:vpn/sslVpnClientCert:SslVpnClientCert example vsc-abc123456

```

func GetSslVpnClientCert 

func GetSslVpnClientCert(ctx *pulumi.Context,
	name string, id pulumi.IDInput, state *SslVpnClientCertState, opts ...pulumi.ResourceOption) (*SslVpnClientCert, error)

GetSslVpnClientCert gets an existing SslVpnClientCert resource's state with the given name, ID, and optional state properties that are used to uniquely qualify the lookup (nil if not required).

func NewSslVpnClientCert 

func NewSslVpnClientCert(ctx *pulumi.Context,
	name string, args *SslVpnClientCertArgs, opts ...pulumi.ResourceOption) (*SslVpnClientCert, error)

NewSslVpnClientCert registers a new resource with the given unique name, arguments, and options.

func (*SslVpnClientCert) ElementType 

func (*SslVpnClientCert) ElementType() reflect.Type

func (*SslVpnClientCert) ToOutput added in v3.43.1 

func (i *SslVpnClientCert) ToOutput(ctx context.Context) pulumix.Output[*SslVpnClientCert]

func (*SslVpnClientCert) ToSslVpnClientCertOutput 

func (i *SslVpnClientCert) ToSslVpnClientCertOutput() SslVpnClientCertOutput

func (*SslVpnClientCert) ToSslVpnClientCertOutputWithContext 

func (i *SslVpnClientCert) ToSslVpnClientCertOutputWithContext(ctx context.Context) SslVpnClientCertOutput

type SslVpnClientCertArgs 

type SslVpnClientCertArgs struct {
	// The name of the client certificate.
	Name pulumi.StringPtrInput
	// The ID of the SSL-VPN server.
	SslVpnServerId pulumi.StringInput
}

The set of arguments for constructing a SslVpnClientCert resource.

func (SslVpnClientCertArgs) ElementType 

func (SslVpnClientCertArgs) ElementType() reflect.Type

type SslVpnClientCertArray 

type SslVpnClientCertArray []SslVpnClientCertInput

func (SslVpnClientCertArray) ElementType 

func (SslVpnClientCertArray) ElementType() reflect.Type

func (SslVpnClientCertArray) ToOutput added in v3.43.1 

func (i SslVpnClientCertArray) ToOutput(ctx context.Context) pulumix.Output[[]*SslVpnClientCert]

func (SslVpnClientCertArray) ToSslVpnClientCertArrayOutput 

func (i SslVpnClientCertArray) ToSslVpnClientCertArrayOutput() SslVpnClientCertArrayOutput

func (SslVpnClientCertArray) ToSslVpnClientCertArrayOutputWithContext 

func (i SslVpnClientCertArray) ToSslVpnClientCertArrayOutputWithContext(ctx context.Context) SslVpnClientCertArrayOutput

type SslVpnClientCertArrayInput 

type SslVpnClientCertArrayInput interface {
	pulumi.Input

	ToSslVpnClientCertArrayOutput() SslVpnClientCertArrayOutput
	ToSslVpnClientCertArrayOutputWithContext(context.Context) SslVpnClientCertArrayOutput
}

SslVpnClientCertArrayInput is an input type that accepts SslVpnClientCertArray and SslVpnClientCertArrayOutput values. You can construct a concrete instance of `SslVpnClientCertArrayInput` via: 

SslVpnClientCertArray{ SslVpnClientCertArgs{...} }

type SslVpnClientCertArrayOutput 

type SslVpnClientCertArrayOutput struct{ *pulumi.OutputState }

func (SslVpnClientCertArrayOutput) ElementType 

func (SslVpnClientCertArrayOutput) ElementType() reflect.Type

func (SslVpnClientCertArrayOutput) Index 

func (o SslVpnClientCertArrayOutput) Index(i pulumi.IntInput) SslVpnClientCertOutput

func (SslVpnClientCertArrayOutput) ToOutput added in v3.43.1 

func (o SslVpnClientCertArrayOutput) ToOutput(ctx context.Context) pulumix.Output[[]*SslVpnClientCert]

func (SslVpnClientCertArrayOutput) ToSslVpnClientCertArrayOutput 

func (o SslVpnClientCertArrayOutput) ToSslVpnClientCertArrayOutput() SslVpnClientCertArrayOutput

func (SslVpnClientCertArrayOutput) ToSslVpnClientCertArrayOutputWithContext 

func (o SslVpnClientCertArrayOutput) ToSslVpnClientCertArrayOutputWithContext(ctx context.Context) SslVpnClientCertArrayOutput

type SslVpnClientCertInput 

type SslVpnClientCertInput interface {
	pulumi.Input

	ToSslVpnClientCertOutput() SslVpnClientCertOutput
	ToSslVpnClientCertOutputWithContext(ctx context.Context) SslVpnClientCertOutput
}

type SslVpnClientCertMap 

type SslVpnClientCertMap map[string]SslVpnClientCertInput

func (SslVpnClientCertMap) ElementType 

func (SslVpnClientCertMap) ElementType() reflect.Type

func (SslVpnClientCertMap) ToOutput added in v3.43.1 

func (i SslVpnClientCertMap) ToOutput(ctx context.Context) pulumix.Output[map[string]*SslVpnClientCert]

func (SslVpnClientCertMap) ToSslVpnClientCertMapOutput 

func (i SslVpnClientCertMap) ToSslVpnClientCertMapOutput() SslVpnClientCertMapOutput

func (SslVpnClientCertMap) ToSslVpnClientCertMapOutputWithContext 

func (i SslVpnClientCertMap) ToSslVpnClientCertMapOutputWithContext(ctx context.Context) SslVpnClientCertMapOutput

type SslVpnClientCertMapInput 

type SslVpnClientCertMapInput interface {
	pulumi.Input

	ToSslVpnClientCertMapOutput() SslVpnClientCertMapOutput
	ToSslVpnClientCertMapOutputWithContext(context.Context) SslVpnClientCertMapOutput
}

SslVpnClientCertMapInput is an input type that accepts SslVpnClientCertMap and SslVpnClientCertMapOutput values. You can construct a concrete instance of `SslVpnClientCertMapInput` via: 

SslVpnClientCertMap{ "key": SslVpnClientCertArgs{...} }

type SslVpnClientCertMapOutput 

type SslVpnClientCertMapOutput struct{ *pulumi.OutputState }

func (SslVpnClientCertMapOutput) ElementType 

func (SslVpnClientCertMapOutput) ElementType() reflect.Type

func (SslVpnClientCertMapOutput) MapIndex 

func (o SslVpnClientCertMapOutput) MapIndex(k pulumi.StringInput) SslVpnClientCertOutput

func (SslVpnClientCertMapOutput) ToOutput added in v3.43.1 

func (o SslVpnClientCertMapOutput) ToOutput(ctx context.Context) pulumix.Output[map[string]*SslVpnClientCert]

func (SslVpnClientCertMapOutput) ToSslVpnClientCertMapOutput 

func (o SslVpnClientCertMapOutput) ToSslVpnClientCertMapOutput() SslVpnClientCertMapOutput

func (SslVpnClientCertMapOutput) ToSslVpnClientCertMapOutputWithContext 

func (o SslVpnClientCertMapOutput) ToSslVpnClientCertMapOutputWithContext(ctx context.Context) SslVpnClientCertMapOutput

type SslVpnClientCertOutput 

type SslVpnClientCertOutput struct{ *pulumi.OutputState }

func (SslVpnClientCertOutput) CaCert added in v3.27.0 

func (o SslVpnClientCertOutput) CaCert() pulumi.StringOutput

The client ca cert.

func (SslVpnClientCertOutput) ClientCert added in v3.27.0 

func (o SslVpnClientCertOutput) ClientCert() pulumi.StringOutput

The client cert.

func (SslVpnClientCertOutput) ClientConfig added in v3.27.0 

func (o SslVpnClientCertOutput) ClientConfig() pulumi.StringOutput

The vpn client config.

func (SslVpnClientCertOutput) ClientKey added in v3.27.0 

func (o SslVpnClientCertOutput) ClientKey() pulumi.StringOutput

The client key.

func (SslVpnClientCertOutput) ElementType 

func (SslVpnClientCertOutput) ElementType() reflect.Type

func (SslVpnClientCertOutput) Name added in v3.27.0 

func (o SslVpnClientCertOutput) Name() pulumi.StringOutput

The name of the client certificate.

func (SslVpnClientCertOutput) SslVpnServerId added in v3.27.0 

func (o SslVpnClientCertOutput) SslVpnServerId() pulumi.StringOutput

The ID of the SSL-VPN server.

func (SslVpnClientCertOutput) Status added in v3.27.0 

func (o SslVpnClientCertOutput) Status() pulumi.StringOutput

The status of the client certificate.

func (SslVpnClientCertOutput) ToOutput added in v3.43.1 

func (o SslVpnClientCertOutput) ToOutput(ctx context.Context) pulumix.Output[*SslVpnClientCert]

func (SslVpnClientCertOutput) ToSslVpnClientCertOutput 

func (o SslVpnClientCertOutput) ToSslVpnClientCertOutput() SslVpnClientCertOutput

func (SslVpnClientCertOutput) ToSslVpnClientCertOutputWithContext 

func (o SslVpnClientCertOutput) ToSslVpnClientCertOutputWithContext(ctx context.Context) SslVpnClientCertOutput

type SslVpnClientCertState 

type SslVpnClientCertState struct {
	// The client ca cert.
	CaCert pulumi.StringPtrInput
	// The client cert.
	ClientCert pulumi.StringPtrInput
	// The vpn client config.
	ClientConfig pulumi.StringPtrInput
	// The client key.
	ClientKey pulumi.StringPtrInput
	// The name of the client certificate.
	Name pulumi.StringPtrInput
	// The ID of the SSL-VPN server.
	SslVpnServerId pulumi.StringPtrInput
	// The status of the client certificate.
	Status pulumi.StringPtrInput
}

func (SslVpnClientCertState) ElementType 

func (SslVpnClientCertState) ElementType() reflect.Type

type SslVpnServer 

type SslVpnServer struct {
	pulumi.CustomResourceState

	// The encryption algorithm that is used in the SSL-VPN connection. Valid values: `AES-128-CBC`,`AES-192-CBC`,`AES-256-CBC`,`none`. Default value: `AES-128-CBC`.
	// * `AES-128-CBC` - the AES-128-CBC algorithm.
	// * `AES-192-CBC` - the AES-192-CBC algorithm.
	// * `AES-256-CBC` - the AES-256-CBC algorithm.
	Cipher pulumi.StringPtrOutput `pulumi:"cipher"`
	// The CIDR block from which access addresses are allocated to the virtual network interface card of the client.
	ClientIpPool pulumi.StringOutput `pulumi:"clientIpPool"`
	// Specifies whether to enable data compression. Valid values: `true`,`false`. Default value: `false`
	Compress pulumi.BoolPtrOutput `pulumi:"compress"`
	// The number of current connections.
	Connections pulumi.IntOutput `pulumi:"connections"`
	// The internet IP of the SSL-VPN server.
	InternetIp pulumi.StringOutput `pulumi:"internetIp"`
	// The CIDR block to be accessed by the client through the SSL-VPN connection. It supports to set multi CIDRs by comma join ways, like `10.0.1.0/24,10.0.2.0/24,10.0.3.0/24`.
	LocalSubnet pulumi.StringOutput `pulumi:"localSubnet"`
	// The maximum number of connections.
	MaxConnections pulumi.IntOutput `pulumi:"maxConnections"`
	// The name of the SSL-VPN server.
	Name pulumi.StringOutput `pulumi:"name"`
	// The port used by the SSL-VPN server. The default value is `1194`.The following ports cannot be used: [22, 2222, 22222, 9000, 9001, 9002, 7505, 80, 443, 53, 68, 123, 4510, 4560, 500, 4500].
	Port pulumi.IntPtrOutput `pulumi:"port"`
	// The protocol used by the SSL-VPN server. Valid value: UDP(default) |TCP
	Protocol pulumi.StringPtrOutput `pulumi:"protocol"`
	// The ID of the VPN gateway.
	VpnGatewayId pulumi.StringOutput `pulumi:"vpnGatewayId"`
}

## Import

SSL-VPN server can be imported using the id, e.g.

```sh 

$ pulumi import alicloud:vpn/sslVpnServer:SslVpnServer example vss-abc123456

```

func GetSslVpnServer 

func GetSslVpnServer(ctx *pulumi.Context,
	name string, id pulumi.IDInput, state *SslVpnServerState, opts ...pulumi.ResourceOption) (*SslVpnServer, error)

GetSslVpnServer gets an existing SslVpnServer resource's state with the given name, ID, and optional state properties that are used to uniquely qualify the lookup (nil if not required).

func NewSslVpnServer 

func NewSslVpnServer(ctx *pulumi.Context,
	name string, args *SslVpnServerArgs, opts ...pulumi.ResourceOption) (*SslVpnServer, error)

NewSslVpnServer registers a new resource with the given unique name, arguments, and options.

func (*SslVpnServer) ElementType 

func (*SslVpnServer) ElementType() reflect.Type

func (*SslVpnServer) ToOutput added in v3.43.1 

func (i *SslVpnServer) ToOutput(ctx context.Context) pulumix.Output[*SslVpnServer]

func (*SslVpnServer) ToSslVpnServerOutput 

func (i *SslVpnServer) ToSslVpnServerOutput() SslVpnServerOutput

func (*SslVpnServer) ToSslVpnServerOutputWithContext 

func (i *SslVpnServer) ToSslVpnServerOutputWithContext(ctx context.Context) SslVpnServerOutput

type SslVpnServerArgs 

type SslVpnServerArgs struct {
	// The encryption algorithm that is used in the SSL-VPN connection. Valid values: `AES-128-CBC`,`AES-192-CBC`,`AES-256-CBC`,`none`. Default value: `AES-128-CBC`.
	// * `AES-128-CBC` - the AES-128-CBC algorithm.
	// * `AES-192-CBC` - the AES-192-CBC algorithm.
	// * `AES-256-CBC` - the AES-256-CBC algorithm.
	Cipher pulumi.StringPtrInput
	// The CIDR block from which access addresses are allocated to the virtual network interface card of the client.
	ClientIpPool pulumi.StringInput
	// Specifies whether to enable data compression. Valid values: `true`,`false`. Default value: `false`
	Compress pulumi.BoolPtrInput
	// The CIDR block to be accessed by the client through the SSL-VPN connection. It supports to set multi CIDRs by comma join ways, like `10.0.1.0/24,10.0.2.0/24,10.0.3.0/24`.
	LocalSubnet pulumi.StringInput
	// The name of the SSL-VPN server.
	Name pulumi.StringPtrInput
	// The port used by the SSL-VPN server. The default value is `1194`.The following ports cannot be used: [22, 2222, 22222, 9000, 9001, 9002, 7505, 80, 443, 53, 68, 123, 4510, 4560, 500, 4500].
	Port pulumi.IntPtrInput
	// The protocol used by the SSL-VPN server. Valid value: UDP(default) |TCP
	Protocol pulumi.StringPtrInput
	// The ID of the VPN gateway.
	VpnGatewayId pulumi.StringInput
}

The set of arguments for constructing a SslVpnServer resource.

func (SslVpnServerArgs) ElementType 

func (SslVpnServerArgs) ElementType() reflect.Type

type SslVpnServerArray 

type SslVpnServerArray []SslVpnServerInput

func (SslVpnServerArray) ElementType 

func (SslVpnServerArray) ElementType() reflect.Type

func (SslVpnServerArray) ToOutput added in v3.43.1 

func (i SslVpnServerArray) ToOutput(ctx context.Context) pulumix.Output[[]*SslVpnServer]

func (SslVpnServerArray) ToSslVpnServerArrayOutput 

func (i SslVpnServerArray) ToSslVpnServerArrayOutput() SslVpnServerArrayOutput

func (SslVpnServerArray) ToSslVpnServerArrayOutputWithContext 

func (i SslVpnServerArray) ToSslVpnServerArrayOutputWithContext(ctx context.Context) SslVpnServerArrayOutput

type SslVpnServerArrayInput 

type SslVpnServerArrayInput interface {
	pulumi.Input

	ToSslVpnServerArrayOutput() SslVpnServerArrayOutput
	ToSslVpnServerArrayOutputWithContext(context.Context) SslVpnServerArrayOutput
}

SslVpnServerArrayInput is an input type that accepts SslVpnServerArray and SslVpnServerArrayOutput values. You can construct a concrete instance of `SslVpnServerArrayInput` via: 

SslVpnServerArray{ SslVpnServerArgs{...} }

type SslVpnServerArrayOutput 

type SslVpnServerArrayOutput struct{ *pulumi.OutputState }

func (SslVpnServerArrayOutput) ElementType 

func (SslVpnServerArrayOutput) ElementType() reflect.Type

func (SslVpnServerArrayOutput) Index 

func (o SslVpnServerArrayOutput) Index(i pulumi.IntInput) SslVpnServerOutput

func (SslVpnServerArrayOutput) ToOutput added in v3.43.1 

func (o SslVpnServerArrayOutput) ToOutput(ctx context.Context) pulumix.Output[[]*SslVpnServer]

func (SslVpnServerArrayOutput) ToSslVpnServerArrayOutput 

func (o SslVpnServerArrayOutput) ToSslVpnServerArrayOutput() SslVpnServerArrayOutput

func (SslVpnServerArrayOutput) ToSslVpnServerArrayOutputWithContext 

func (o SslVpnServerArrayOutput) ToSslVpnServerArrayOutputWithContext(ctx context.Context) SslVpnServerArrayOutput

type SslVpnServerInput 

type SslVpnServerInput interface {
	pulumi.Input

	ToSslVpnServerOutput() SslVpnServerOutput
	ToSslVpnServerOutputWithContext(ctx context.Context) SslVpnServerOutput
}

type SslVpnServerMap 

type SslVpnServerMap map[string]SslVpnServerInput

func (SslVpnServerMap) ElementType 

func (SslVpnServerMap) ElementType() reflect.Type

func (SslVpnServerMap) ToOutput added in v3.43.1 

func (i SslVpnServerMap) ToOutput(ctx context.Context) pulumix.Output[map[string]*SslVpnServer]

func (SslVpnServerMap) ToSslVpnServerMapOutput 

func (i SslVpnServerMap) ToSslVpnServerMapOutput() SslVpnServerMapOutput

func (SslVpnServerMap) ToSslVpnServerMapOutputWithContext 

func (i SslVpnServerMap) ToSslVpnServerMapOutputWithContext(ctx context.Context) SslVpnServerMapOutput

type SslVpnServerMapInput 

type SslVpnServerMapInput interface {
	pulumi.Input

	ToSslVpnServerMapOutput() SslVpnServerMapOutput
	ToSslVpnServerMapOutputWithContext(context.Context) SslVpnServerMapOutput
}

SslVpnServerMapInput is an input type that accepts SslVpnServerMap and SslVpnServerMapOutput values. You can construct a concrete instance of `SslVpnServerMapInput` via: 

SslVpnServerMap{ "key": SslVpnServerArgs{...} }

type SslVpnServerMapOutput 

type SslVpnServerMapOutput struct{ *pulumi.OutputState }

func (SslVpnServerMapOutput) ElementType 

func (SslVpnServerMapOutput) ElementType() reflect.Type

func (SslVpnServerMapOutput) MapIndex 

func (o SslVpnServerMapOutput) MapIndex(k pulumi.StringInput) SslVpnServerOutput

func (SslVpnServerMapOutput) ToOutput added in v3.43.1 

func (o SslVpnServerMapOutput) ToOutput(ctx context.Context) pulumix.Output[map[string]*SslVpnServer]

func (SslVpnServerMapOutput) ToSslVpnServerMapOutput 

func (o SslVpnServerMapOutput) ToSslVpnServerMapOutput() SslVpnServerMapOutput

func (SslVpnServerMapOutput) ToSslVpnServerMapOutputWithContext 

func (o SslVpnServerMapOutput) ToSslVpnServerMapOutputWithContext(ctx context.Context) SslVpnServerMapOutput

type SslVpnServerOutput 

type SslVpnServerOutput struct{ *pulumi.OutputState }

func (SslVpnServerOutput) Cipher added in v3.27.0 

func (o SslVpnServerOutput) Cipher() pulumi.StringPtrOutput

The encryption algorithm that is used in the SSL-VPN connection. Valid values: `AES-128-CBC`,`AES-192-CBC`,`AES-256-CBC`,`none`. Default value: `AES-128-CBC`. * `AES-128-CBC` - the AES-128-CBC algorithm. * `AES-192-CBC` - the AES-192-CBC algorithm. * `AES-256-CBC` - the AES-256-CBC algorithm.

func (SslVpnServerOutput) ClientIpPool added in v3.27.0 

func (o SslVpnServerOutput) ClientIpPool() pulumi.StringOutput

The CIDR block from which access addresses are allocated to the virtual network interface card of the client.

func (SslVpnServerOutput) Compress added in v3.27.0 

func (o SslVpnServerOutput) Compress() pulumi.BoolPtrOutput

Specifies whether to enable data compression. Valid values: `true`,`false`. Default value: `false`

func (SslVpnServerOutput) Connections added in v3.27.0 

func (o SslVpnServerOutput) Connections() pulumi.IntOutput

The number of current connections.

func (SslVpnServerOutput) ElementType 

func (SslVpnServerOutput) ElementType() reflect.Type

func (SslVpnServerOutput) InternetIp added in v3.27.0 

func (o SslVpnServerOutput) InternetIp() pulumi.StringOutput

The internet IP of the SSL-VPN server.

func (SslVpnServerOutput) LocalSubnet added in v3.27.0 

func (o SslVpnServerOutput) LocalSubnet() pulumi.StringOutput

The CIDR block to be accessed by the client through the SSL-VPN connection. It supports to set multi CIDRs by comma join ways, like `10.0.1.0/24,10.0.2.0/24,10.0.3.0/24`.

func (SslVpnServerOutput) MaxConnections added in v3.27.0 

func (o SslVpnServerOutput) MaxConnections() pulumi.IntOutput

The maximum number of connections.

func (SslVpnServerOutput) Name added in v3.27.0 

func (o SslVpnServerOutput) Name() pulumi.StringOutput

The name of the SSL-VPN server.

func (SslVpnServerOutput) Port added in v3.27.0 

func (o SslVpnServerOutput) Port() pulumi.IntPtrOutput

The port used by the SSL-VPN server. The default value is `1194`.The following ports cannot be used: [22, 2222, 22222, 9000, 9001, 9002, 7505, 80, 443, 53, 68, 123, 4510, 4560, 500, 4500].

func (SslVpnServerOutput) Protocol added in v3.27.0 

func (o SslVpnServerOutput) Protocol() pulumi.StringPtrOutput

The protocol used by the SSL-VPN server. Valid value: UDP(default) |TCP

func (SslVpnServerOutput) ToOutput added in v3.43.1 

func (o SslVpnServerOutput) ToOutput(ctx context.Context) pulumix.Output[*SslVpnServer]

func (SslVpnServerOutput) ToSslVpnServerOutput 

func (o SslVpnServerOutput) ToSslVpnServerOutput() SslVpnServerOutput

func (SslVpnServerOutput) ToSslVpnServerOutputWithContext 

func (o SslVpnServerOutput) ToSslVpnServerOutputWithContext(ctx context.Context) SslVpnServerOutput

func (SslVpnServerOutput) VpnGatewayId added in v3.27.0 

func (o SslVpnServerOutput) VpnGatewayId() pulumi.StringOutput

The ID of the VPN gateway.

type SslVpnServerState 

type SslVpnServerState struct {
	// The encryption algorithm that is used in the SSL-VPN connection. Valid values: `AES-128-CBC`,`AES-192-CBC`,`AES-256-CBC`,`none`. Default value: `AES-128-CBC`.
	// * `AES-128-CBC` - the AES-128-CBC algorithm.
	// * `AES-192-CBC` - the AES-192-CBC algorithm.
	// * `AES-256-CBC` - the AES-256-CBC algorithm.
	Cipher pulumi.StringPtrInput
	// The CIDR block from which access addresses are allocated to the virtual network interface card of the client.
	ClientIpPool pulumi.StringPtrInput
	// Specifies whether to enable data compression. Valid values: `true`,`false`. Default value: `false`
	Compress pulumi.BoolPtrInput
	// The number of current connections.
	Connections pulumi.IntPtrInput
	// The internet IP of the SSL-VPN server.
	InternetIp pulumi.StringPtrInput
	// The CIDR block to be accessed by the client through the SSL-VPN connection. It supports to set multi CIDRs by comma join ways, like `10.0.1.0/24,10.0.2.0/24,10.0.3.0/24`.
	LocalSubnet pulumi.StringPtrInput
	// The maximum number of connections.
	MaxConnections pulumi.IntPtrInput
	// The name of the SSL-VPN server.
	Name pulumi.StringPtrInput
	// The port used by the SSL-VPN server. The default value is `1194`.The following ports cannot be used: [22, 2222, 22222, 9000, 9001, 9002, 7505, 80, 443, 53, 68, 123, 4510, 4560, 500, 4500].
	Port pulumi.IntPtrInput
	// The protocol used by the SSL-VPN server. Valid value: UDP(default) |TCP
	Protocol pulumi.StringPtrInput
	// The ID of the VPN gateway.
	VpnGatewayId pulumi.StringPtrInput
}

func (SslVpnServerState) ElementType 

func (SslVpnServerState) ElementType() reflect.Type

Source Files

View all Source files

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL
go.dev uses cookies from Google to deliver and enhance the quality of its services and to analyze traffic. Learn more.