params

package
v1.0.0-beta.1 Latest Latest
Warning

This package is not in the latest version of its module.

 Go to latest Published: Nov 2, 2020 License: GPL-3.0 Imports: 10 Imported by: 457

Documentation

Overview

Package params defines important constants that are essential to eth2 services.

Index

Constants

This section is empty.

Variables

This section is empty.

Functions

func LoadChainConfigFile added in v1.0.0 

func LoadChainConfigFile(chainConfigFileName string)

LoadChainConfigFile load, convert hex values into valid param yaml format, unmarshal , and apply beacon chain config file.

func OverrideBeaconConfig 

func OverrideBeaconConfig(c *BeaconChainConfig)

OverrideBeaconConfig by replacing the config. The preferred pattern is to call BeaconConfig(), change the specific parameters, and then call OverrideBeaconConfig(c). Any subsequent calls to params.BeaconConfig() will return this new configuration.

func OverrideBeaconNetworkConfig added in v1.0.0 

func OverrideBeaconNetworkConfig(cfg *NetworkConfig)

OverrideBeaconNetworkConfig will override the network config with the added argument.

func SetupTestConfigCleanup added in v1.0.0 

func SetupTestConfigCleanup(t testing.TB)

SetupTestConfigCleanup preserves configurations allowing to modify them within tests without any restrictions, everything is restored after the test.

func UseAltonaConfig 

func UseAltonaConfig()

UseAltonaConfig sets the main beacon chain config for altona.

func UseAltonaNetworkConfig 

func UseAltonaNetworkConfig()

UseAltonaNetworkConfig uses the Altona specific network config.

func UseE2EConfig added in v1.0.0 

func UseE2EConfig()

UseE2EConfig for beacon chain services.

func UseMainnetConfig 

func UseMainnetConfig()

UseMainnetConfig for beacon chain services.

func UseMedallaConfig 

func UseMedallaConfig()

UseMedallaConfig sets the main beacon chain config for medalla.

func UseMedallaNetworkConfig 

func UseMedallaNetworkConfig()

UseMedallaNetworkConfig uses the Medalla specific network config.

func UseMinimalConfig 

func UseMinimalConfig()

UseMinimalConfig for beacon chain services.

func UseOnyxConfig 

func UseOnyxConfig()

UseOnyxConfig for beacon chain services. Currently, Onyx uses the unchanged mainnet configuration.

func UseOnyxNetworkConfig 

func UseOnyxNetworkConfig()

UseOnyxNetworkConfig uses the Onyx specific network config.

func UseSpadinaConfig 

func UseSpadinaConfig()

UseSpadinaConfig sets the main beacon chain config for Spadina.

func UseSpadinaNetworkConfig 

func UseSpadinaNetworkConfig()

UseSpadinaNetworkConfig uses the Spadina specific network config.

func UseZinkenConfig 

func UseZinkenConfig()

UseZinkenConfig sets the main beacon chain config for Zinken.

func UseZinkenNetworkConfig 

func UseZinkenNetworkConfig()

UseZinkenNetworkConfig uses the Zinken specific network config.

Types

type BeaconChainConfig 

type BeaconChainConfig struct {
	// Constants (non-configurable)
	GenesisSlot              uint64 `yaml:"GENESIS_SLOT"`                // GenesisSlot represents the first canonical slot number of the beacon chain.
	GenesisEpoch             uint64 `yaml:"GENESIS_EPOCH"`               // GenesisEpoch represents the first canonical epoch number of the beacon chain.
	FarFutureEpoch           uint64 `yaml:"FAR_FUTURE_EPOCH"`            // FarFutureEpoch represents a epoch extremely far away in the future used as the default penalization slot for validators.
	BaseRewardsPerEpoch      uint64 `yaml:"BASE_REWARDS_PER_EPOCH"`      // BaseRewardsPerEpoch is used to calculate the per epoch rewards.
	DepositContractTreeDepth uint64 `yaml:"DEPOSIT_CONTRACT_TREE_DEPTH"` // DepositContractTreeDepth depth of the Merkle trie of deposits in the validator deposit contract on the PoW chain.
	JustificationBitsLength  uint64 `yaml:"JUSTIFICATION_BITS_LENGTH"`   // JustificationBitsLength defines number of epochs to track when implementing k-finality in Casper FFG.

	// Misc constants.
	TargetCommitteeSize            uint64 `yaml:"TARGET_COMMITTEE_SIZE"`              // TargetCommitteeSize is the number of validators in a committee when the chain is healthy.
	MaxValidatorsPerCommittee      uint64 `yaml:"MAX_VALIDATORS_PER_COMMITTEE"`       // MaxValidatorsPerCommittee defines the upper bound of the size of a committee.
	MaxCommitteesPerSlot           uint64 `yaml:"MAX_COMMITTEES_PER_SLOT"`            // MaxCommitteesPerSlot defines the max amount of committee in a single slot.
	MinPerEpochChurnLimit          uint64 `yaml:"MIN_PER_EPOCH_CHURN_LIMIT"`          // MinPerEpochChurnLimit is the minimum amount of churn allotted for validator rotations.
	ChurnLimitQuotient             uint64 `yaml:"CHURN_LIMIT_QUOTIENT"`               // ChurnLimitQuotient is used to determine the limit of how many validators can rotate per epoch.
	ShuffleRoundCount              uint64 `yaml:"SHUFFLE_ROUND_COUNT"`                // ShuffleRoundCount is used for retrieving the permuted index.
	MinGenesisActiveValidatorCount uint64 `yaml:"MIN_GENESIS_ACTIVE_VALIDATOR_COUNT"` // MinGenesisActiveValidatorCount defines how many validator deposits needed to kick off beacon chain.
	MinGenesisTime                 uint64 `yaml:"MIN_GENESIS_TIME"`                   // MinGenesisTime is the time that needed to pass before kicking off beacon chain.
	TargetAggregatorsPerCommittee  uint64 `yaml:"TARGET_AGGREGATORS_PER_COMMITTEE"`   // TargetAggregatorsPerCommittee defines the number of aggregators inside one committee.
	HysteresisQuotient             uint64 `yaml:"HYSTERESIS_QUOTIENT"`                // HysteresisQuotient defines the hysteresis quotient for effective balance calculations.
	HysteresisDownwardMultiplier   uint64 `yaml:"HYSTERESIS_DOWNWARD_MULTIPLIER"`     // HysteresisDownwardMultiplier defines the hysteresis downward multiplier for effective balance calculations.
	HysteresisUpwardMultiplier     uint64 `yaml:"HYSTERESIS_UPWARD_MULTIPLIER"`       // HysteresisUpwardMultiplier defines the hysteresis upward multiplier for effective balance calculations.

	// Gwei value constants.
	MinDepositAmount          uint64 `yaml:"MIN_DEPOSIT_AMOUNT"`          // MinDepositAmount is the minimum amount of Gwei a validator can send to the deposit contract at once (lower amounts will be reverted).
	MaxEffectiveBalance       uint64 `yaml:"MAX_EFFECTIVE_BALANCE"`       // MaxEffectiveBalance is the maximal amount of Gwei that is effective for staking.
	EjectionBalance           uint64 `yaml:"EJECTION_BALANCE"`            // EjectionBalance is the minimal GWei a validator needs to have before ejected.
	EffectiveBalanceIncrement uint64 `yaml:"EFFECTIVE_BALANCE_INCREMENT"` // EffectiveBalanceIncrement is used for converting the high balance into the low balance for validators.

	// Initial value constants.
	BLSWithdrawalPrefixByte byte     `yaml:"BLS_WITHDRAWAL_PREFIX"` // BLSWithdrawalPrefixByte is used for BLS withdrawal and it's the first byte.
	ZeroHash                [32]byte // ZeroHash is used to represent a zeroed out 32 byte array.

	// Time parameters constants.
	GenesisDelay                     uint64 `yaml:"GENESIS_DELAY"`                       // GenesisDelay is the minimum number of seconds to delay starting the ETH2 genesis. Must be at least 1 second.
	MinAttestationInclusionDelay     uint64 `yaml:"MIN_ATTESTATION_INCLUSION_DELAY"`     // MinAttestationInclusionDelay defines how many slots validator has to wait to include attestation for beacon block.
	SecondsPerSlot                   uint64 `yaml:"SECONDS_PER_SLOT"`                    // SecondsPerSlot is how many seconds are in a single slot.
	SlotsPerEpoch                    uint64 `yaml:"SLOTS_PER_EPOCH"`                     // SlotsPerEpoch is the number of slots in an epoch.
	MinSeedLookahead                 uint64 `yaml:"MIN_SEED_LOOKAHEAD"`                  // MinSeedLookahead is the duration of randao look ahead seed.
	MaxSeedLookahead                 uint64 `yaml:"MAX_SEED_LOOKAHEAD"`                  // MaxSeedLookahead is the duration a validator has to wait for entry and exit in epoch.
	EpochsPerEth1VotingPeriod        uint64 `yaml:"EPOCHS_PER_ETH1_VOTING_PERIOD"`       // EpochsPerEth1VotingPeriod defines how often the merkle root of deposit receipts get updated in beacon node on per epoch basis.
	SlotsPerHistoricalRoot           uint64 `yaml:"SLOTS_PER_HISTORICAL_ROOT"`           // SlotsPerHistoricalRoot defines how often the historical root is saved.
	MinValidatorWithdrawabilityDelay uint64 `yaml:"MIN_VALIDATOR_WITHDRAWABILITY_DELAY"` // MinValidatorWithdrawabilityDelay is the shortest amount of time a validator has to wait to withdraw.
	ShardCommitteePeriod             uint64 `yaml:"SHARD_COMMITTEE_PERIOD"`              // ShardCommitteePeriod is the minimum amount of epochs a validator must participate before exiting.
	MinEpochsToInactivityPenalty     uint64 `yaml:"MIN_EPOCHS_TO_INACTIVITY_PENALTY"`    // MinEpochsToInactivityPenalty defines the minimum amount of epochs since finality to begin penalizing inactivity.
	Eth1FollowDistance               uint64 `yaml:"ETH1_FOLLOW_DISTANCE"`                // Eth1FollowDistance is the number of eth1.0 blocks to wait before considering a new deposit for voting. This only applies after the chain as been started.
	SafeSlotsToUpdateJustified       uint64 `yaml:"SAFE_SLOTS_TO_UPDATE_JUSTIFIED"`      // SafeSlotsToUpdateJustified is the minimal slots needed to update justified check point.
	SecondsPerETH1Block              uint64 `yaml:"SECONDS_PER_ETH1_BLOCK"`              // SecondsPerETH1Block is the approximate time for a single eth1 block to be produced.

	// State list lengths
	EpochsPerHistoricalVector uint64 `yaml:"EPOCHS_PER_HISTORICAL_VECTOR"` // EpochsPerHistoricalVector defines max length in epoch to store old historical stats in beacon state.
	EpochsPerSlashingsVector  uint64 `yaml:"EPOCHS_PER_SLASHINGS_VECTOR"`  // EpochsPerSlashingsVector defines max length in epoch to store old stats to recompute slashing witness.
	HistoricalRootsLimit      uint64 `yaml:"HISTORICAL_ROOTS_LIMIT"`       // HistoricalRootsLimit defines max historical roots that can be saved in state before roll over.
	ValidatorRegistryLimit    uint64 `yaml:"VALIDATOR_REGISTRY_LIMIT"`     // ValidatorRegistryLimit defines the upper bound of validators can participate in eth2.

	// Reward and penalty quotients constants.
	BaseRewardFactor               uint64 `yaml:"BASE_REWARD_FACTOR"`               // BaseRewardFactor is used to calculate validator per-slot interest rate.
	WhistleBlowerRewardQuotient    uint64 `yaml:"WHISTLEBLOWER_REWARD_QUOTIENT"`    // WhistleBlowerRewardQuotient is used to calculate whistle blower reward.
	ProposerRewardQuotient         uint64 `yaml:"PROPOSER_REWARD_QUOTIENT"`         // ProposerRewardQuotient is used to calculate the reward for proposers.
	InactivityPenaltyQuotient      uint64 `yaml:"INACTIVITY_PENALTY_QUOTIENT"`      // InactivityPenaltyQuotient is used to calculate the penalty for a validator that is offline.
	MinSlashingPenaltyQuotient     uint64 `yaml:"MIN_SLASHING_PENALTY_QUOTIENT"`    // MinSlashingPenaltyQuotient is used to calculate the minimum penalty to prevent DoS attacks.
	ProportionalSlashingMultiplier uint64 `yaml:"PROPORTIONAL_SLASHING_MULTIPLIER"` // ProportionalSlashingMultiplier is used as a multiplier on slashed penalties.

	// Max operations per block constants.
	MaxProposerSlashings uint64 `yaml:"MAX_PROPOSER_SLASHINGS"` // MaxProposerSlashings defines the maximum number of slashings of proposers possible in a block.
	MaxAttesterSlashings uint64 `yaml:"MAX_ATTESTER_SLASHINGS"` // MaxAttesterSlashings defines the maximum number of casper FFG slashings possible in a block.
	MaxAttestations      uint64 `yaml:"MAX_ATTESTATIONS"`       // MaxAttestations defines the maximum allowed attestations in a beacon block.
	MaxDeposits          uint64 `yaml:"MAX_DEPOSITS"`           // MaxDeposits defines the maximum number of validator deposits in a block.
	MaxVoluntaryExits    uint64 `yaml:"MAX_VOLUNTARY_EXITS"`    // MaxVoluntaryExits defines the maximum number of validator exits in a block.

	// BLS domain values.
	DomainBeaconProposer    [4]byte `yaml:"DOMAIN_BEACON_PROPOSER"`     // DomainBeaconProposer defines the BLS signature domain for beacon proposal verification.
	DomainRandao            [4]byte `yaml:"DOMAIN_RANDAO"`              // DomainRandao defines the BLS signature domain for randao verification.
	DomainBeaconAttester    [4]byte `yaml:"DOMAIN_BEACON_ATTESTER"`     // DomainBeaconAttester defines the BLS signature domain for attestation verification.
	DomainDeposit           [4]byte `yaml:"DOMAIN_DEPOSIT"`             // DomainDeposit defines the BLS signature domain for deposit verification.
	DomainVoluntaryExit     [4]byte `yaml:"DOMAIN_VOLUNTARY_EXIT"`      // DomainVoluntaryExit defines the BLS signature domain for exit verification.
	DomainSelectionProof    [4]byte `yaml:"DOMAIN_SELECTION_PROOF"`     // DomainSelectionProof defines the BLS signature domain for selection proof.
	DomainAggregateAndProof [4]byte `yaml:"DOMAIN_AGGREGATE_AND_PROOF"` // DomainAggregateAndProof defines the BLS signature domain for aggregate and proof.

	// Prysm constants.
	GweiPerEth                uint64        // GweiPerEth is the amount of gwei corresponding to 1 eth.
	BLSSecretKeyLength        int           // BLSSecretKeyLength defines the expected length of BLS secret keys in bytes.
	BLSPubkeyLength           int           // BLSPubkeyLength defines the expected length of BLS public keys in bytes.
	BLSSignatureLength        int           // BLSSignatureLength defines the expected length of BLS signatures in bytes.
	DefaultBufferSize         int           // DefaultBufferSize for channels across the Prysm repository.
	ValidatorPrivkeyFileName  string        // ValidatorPrivKeyFileName specifies the string name of a validator private key file.
	WithdrawalPrivkeyFileName string        // WithdrawalPrivKeyFileName specifies the string name of a withdrawal private key file.
	RPCSyncCheck              time.Duration // Number of seconds to query the sync service, to find out if the node is synced or not.
	EmptySignature            [96]byte      // EmptySignature is used to represent a zeroed out BLS Signature.
	DefaultPageSize           int           // DefaultPageSize defines the default page size for RPC server request.
	MaxPeersToSync            int           // MaxPeersToSync describes the limit for number of peers in round robin sync.
	SlotsPerArchivedPoint     uint64        // SlotsPerArchivedPoint defines the number of slots per one archived point.
	GenesisCountdownInterval  time.Duration // How often to log the countdown until the genesis time is reached.
	NetworkName               string        // NetworkName for allowing an easy human-readable way of knowing what chain is being used.

	// Slasher constants.
	WeakSubjectivityPeriod    uint64 // WeakSubjectivityPeriod defines the time period expressed in number of epochs were proof of stake network should validate block headers and attestations for slashable events.
	PruneSlasherStoragePeriod uint64 // PruneSlasherStoragePeriod defines the time period expressed in number of epochs were proof of stake network should prune attestation and block header store.

	// Fork-related values.
	GenesisForkVersion  []byte            `yaml:"GENESIS_FORK_VERSION"` // GenesisForkVersion is used to track fork version between state transitions.
	NextForkVersion     []byte            `yaml:"NEXT_FORK_VERSION"`    // NextForkVersion is used to track the upcoming fork version, if any.
	NextForkEpoch       uint64            `yaml:"NEXT_FORK_EPOCH"`      // NextForkEpoch is used to track the epoch of the next fork, if any.
	ForkVersionSchedule map[uint64][]byte // Schedule of fork versions by epoch number.

	// Weak subjectivity values.
	SafetyDecay uint64 // SafetyDecay is defined as the loss in the 1/3 consensus safety margin of the casper FFG mechanism.
}

BeaconChainConfig contains constant configs for node to participate in beacon chain.

func AltonaConfig 

func AltonaConfig() *BeaconChainConfig

AltonaConfig defines the config for the altona testnet.

func BeaconConfig 

func BeaconConfig() *BeaconChainConfig

BeaconConfig retrieves beacon chain config.

func E2ETestConfig added in v1.0.0 

func E2ETestConfig() *BeaconChainConfig

E2ETestConfig retrieves the configurations made specifically for E2E testing. Warning: This config is only for testing, it is not meant for use outside of E2E.

func MainnetConfig 

func MainnetConfig() *BeaconChainConfig

MainnetConfig returns the configuration to be used in the main network.

func MedallaConfig 

func MedallaConfig() *BeaconChainConfig

MedallaConfig defines the config for the medalla testnet.

func MinimalSpecConfig 

func MinimalSpecConfig() *BeaconChainConfig

MinimalSpecConfig retrieves the minimal config used in spec tests.

func SpadinaConfig 

func SpadinaConfig() *BeaconChainConfig

SpadinaConfig defines the config for the Spadina testnet.

func ZinkenConfig 

func ZinkenConfig() *BeaconChainConfig

ZinkenConfig defines the config for the Zinken testnet.

func (*BeaconChainConfig) Copy added in v1.0.0 

func (c *BeaconChainConfig) Copy() *BeaconChainConfig

Copy returns a copy of the config object.

type IoConfig added in v1.0.0 

type IoConfig struct {
	ReadWritePermissions        os.FileMode
	ReadWriteExecutePermissions os.FileMode
	BoltTimeout                 time.Duration
}

IoConfig defines the shared io parameters.

func BeaconIoConfig added in v1.0.0 

func BeaconIoConfig() *IoConfig

BeaconIoConfig returns the current io config for the beacon chain.

type NetworkConfig added in v1.0.0 

type NetworkConfig struct {
	GossipMaxSize                     uint64        `yaml:"GOSSIP_MAX_SIZE"`                       // GossipMaxSize is the maximum allowed size of uncompressed gossip messages.
	MaxChunkSize                      uint64        `yaml:"MAX_CHUNK_SIZE"`                        // MaxChunkSize is the the maximum allowed size of uncompressed req/resp chunked responses.
	AttestationSubnetCount            uint64        `yaml:"ATTESTATION_SUBNET_COUNT"`              // AttestationSubnetCount is the number of attestation subnets used in the gossipsub protocol.
	AttestationPropagationSlotRange   uint64        `yaml:"ATTESTATION_PROPAGATION_SLOT_RANGE"`    // AttestationPropagationSlotRange is the maximum number of slots during which an attestation can be propagated.
	RandomSubnetsPerValidator         uint64        `yaml:"RANDOM_SUBNETS_PER_VALIDATOR"`          // RandomSubnetsPerValidator specifies the amount of subnets a validator has to be subscribed to at one time.
	EpochsPerRandomSubnetSubscription uint64        `yaml:"EPOCHS_PER_RANDOM_SUBNET_SUBSCRIPTION"` // EpochsPerRandomSubnetSubscription specifies the minimum duration a validator is connected to their subnet.
	MaxRequestBlocks                  uint64        `yaml:"MAX_REQUEST_BLOCKS"`                    // MaxRequestBlocks is the maximum number of blocks in a single request.
	TtfbTimeout                       time.Duration `yaml:"TTFB_TIMEOUT"`                          // TtfbTimeout is the maximum time to wait for first byte of request response (time-to-first-byte).
	RespTimeout                       time.Duration `yaml:"RESP_TIMEOUT"`                          // RespTimeout is the maximum time for complete response transfer.
	MaximumGossipClockDisparity       time.Duration `yaml:"MAXIMUM_GOSSIP_CLOCK_DISPARITY"`        // MaximumGossipClockDisparity is the maximum milliseconds of clock disparity assumed between honest nodes.
	MessageDomainInvalidSnappy        [4]byte       `yaml:"MESSAGE_DOMAIN_INVALID_SNAPPY"`         // MessageDomainInvalidSnappy is the 4-byte domain for gossip message-id isolation of invalid snappy messages.
	MessageDomainValidSnappy          [4]byte       `yaml:"MESSAGE_DOMAIN_VALID_SNAPPY"`           // MessageDomainValidSnappy is the 4-byte domain for gossip message-id isolation of valid snappy messages.

	// DiscoveryV5 Config
	ETH2Key      string // ETH2Key is the ENR key of the eth2 object in an enr.
	AttSubnetKey string // AttSubnetKey is the ENR key of the subnet bitfield in the enr.

	// Chain Network Config
	ContractDeploymentBlock uint64   // ContractDeploymentBlock is the eth1 block in which the deposit contract is deployed.
	DepositContractAddress  string   // DepositContractAddress is the address of the deposit contract.
	ChainID                 uint64   // ChainID of the eth1 network. This used for replay protection.
	NetworkID               uint64   // NetworkID of the eth1 network. This used for replay protection.
	BootstrapNodes          []string // BootstrapNodes are the addresses of the bootnodes.
}

NetworkConfig defines the spec based network parameters.

func BeaconNetworkConfig added in v1.0.0 

func BeaconNetworkConfig() *NetworkConfig

BeaconNetworkConfig returns the current network config for the beacon chain.

func (*NetworkConfig) Copy added in v1.0.0 

func (c *NetworkConfig) Copy() *NetworkConfig

Copy returns Copy of the config object.

Source Files

View all Source files

Directories

Path Synopsis
Package spectest allows for easy switching of chain configuration parameters in spec conformity unit tests.
 Package spectest allows for easy switching of chain configuration parameters in spec conformity unit tests.

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL
go.dev uses cookies from Google to deliver and enhance the quality of its services and to analyze traffic. Learn more.