app-policy

README

Application Layer Policy

Application Layer Policy for Project Calico enforces network and application layer authorization policies using Istio.

Istio mints and distributes cryptographic identities and uses them to establish mutually authenticated TLS connections between pods. Calico enforces authorization policy on this communication integrating cryptographic identities and network layer attributes.

The envoy.ext_authz filter inserted into the proxy, which calls out to Dikastes when service requests are processed. We compute policy based on a global store which is distributed to Dikastes by its local Felix.

Getting Started

This guide explains how to install Calico & Istio into your cluster, and use it to enforce authorization policies in a simple demo application.

This demo will run on a Calico-enabled Kubernetes cluster. You will need a Kubernetes cluster running v1.8 or later with RBAC and Initializers enabled.

If you have Calico or Istio installed, remove them from the cluster. This preview relies on the latest Calico build and several custom-built Istio components which will be installed in the demo.

Starting a cluster with Vagrant

If you do not have a test cluster running Kubernetes 1.8 or later with RBAC and Initializers, this section will walk you through creating one on your local machine using Vagrant.

If you already have a test cluster, you can skip to installing calicoctl.

Prerequisites

• Vagrant
• VirtualBox

Install Vagrant and VirtualBox, then from the root directory of this repo:

cd config/cluster
vagrant up

This will create a 3-node Kubernetes cluster in 3 VirtualBox VMs.

DO NOT USE THIS IN PRODUCTION. The API server is loaded with a certificate and keypair checked into this repository. If you put this in production anyone will be able to impersonate your API server.

Open VirtualBox and click on one of the created VMs, then click Network and go to the tab for Adapter 2. You should see it "Attached to: Host-only Adapter". Make a note of the entry in the "Name:" box. This is the name of the host-only network adapter you will use to communicate with your cluster.

Add an IP address to this network adapter and bring it up.

On Linux:

sudo ip addr add 172.18.18.1/24 dev <adaptername>
sudo ip link set <adaptername> up

Verify you can ping the master

ping 172.18.18.101

Finally, add the cluster to your kubeconfig and activate the context

kubectl config set-cluster vagrant-cluster --server=https://172.18.18.101:6443 --certificate-authority=$(pwd)/apiserver.crt
kubectl config set-credentials vagrant-admin --username=admin --password=admin
kubectl config set-context vagrant-admin --cluster=vagrant-cluster --user=vagrant-admin
kubectl config use-context vagrant-admin

Verify your kubeconfig is working, for example:

kubectl get pods

Since we are using the Kubernetes API server as the Calico datastore in this demo cluster (KDD mode), we need to configure calicoctl to use that datastore as well. This can be done by setting the following environment variables

export CALICO_DATASTORE_TYPE=kubernetes CALICO_KUBECONFIG=<your kube config file>

Install calicoctl

You will need an updated version of calicoctl.

wget https://www.projectcalico.org/builds/calicoctl
chmod +x calicoctl

Configure calicoctl to connect to your Calico datastore by following the instructions appropriate for your cluster. If you followed the directions for installing a Vagrant cluster above, you have already completed this configuration.

Install Calico

From the main project directory:

kubectl apply -f config/install/05-calico.yaml

Install Istio

Install the Istio roles, bindings, and components.

kubectl apply -f config/install/10-istio.yaml

When all components have started, you should see the pods in the istio-system namespace similar to the following.

kubectl get pods --namespace=istio-system 

NAME                                        READY     STATUS      RESTARTS   AGE
istio-citadel-55bbf4ddff-hdbqb              1/1       Running     0          48m
istio-cleanup-old-ca-c97g4                  0/1       Completed   0          48m
istio-cleanup-secrets-2jvjx                 0/1       Completed   0          48m
istio-egressgateway-6864b4f8cf-hcrtr        1/1       Running     0          48m
istio-galley-68559fd97f-sglj2               1/1       Running     0          48m
istio-ingress-598f66ccbf-scgj2              1/1       Running     0          48m
istio-ingressgateway-59f87688f-6txhr        1/1       Running     0          48m
istio-mixer-post-install-v6fn4              0/1       Completed   0          48m
istio-pilot-796444c567-sf89w                2/2       Running     0          48m
istio-policy-77b65686bb-rzxp4               2/2       Running     0          48m
istio-security-post-install-hn5g2           0/1       Completed   0          48m
istio-sidecar-injector-896658cbd-h6xk5      1/1       Running     0          48m
istio-statsd-prom-bridge-6dbb7dcc7f-75q7g   1/1       Running     0          48m
istio-telemetry-65968c56f8-qg672            2/2       Running     0          48m
prometheus-586d95b8d9-ww8jq                 1/1       Running     0          48m

Dikastes is a Calico component that computes authorization policy for the Istio proxies on each host. Calico utilizes Istio's automatic sidecar injection to inject Dikastes container into a pod at pod creation time.

Enable sidecar injection for the default namespace

Enable sidecar injection for the default namespace where the rest of this demo is run.

kubectl label namespace default istio-injection=enabled

If you want to experiment with applications in other namespaces, label them using the same command.

Enable Calico Application Layer Policy

Apply the manifest to configure Istio to use Calico Application Layer Policy for authorization.

kubectl apply -f 20-app-policy.yaml

Install the demo application

We will use a simple microservice application to demonstrate Calico application layer policy. The YAO Bank application creates a customer-facing web application, a microservice that serves up account summaries, and an etcd database.

kubectl apply -f config/demo/10-yaobank.yaml

When the demo application has come up, you will see 3 pods.

kubectl get pods

NAME                        READY     STATUS    RESTARTS   AGE
customer-2809159614-qqfnx   3/3       Running   0          21h
database-1601951801-m4w70   3/3       Running   0          21h
summary-2817688950-g1b3n    3/3       Running   0          21h

There is a Kubernetes ServiceAccount for each microservice in the application (in addition to the default account).

kubectl get serviceaccount 

NAME       SECRETS   AGE
customer   1         21h
database   1         21h
default    1         21h
summary    1         21h

Notice also that Istio CA will have created a secret of type istio.io/key-and-cert for each service account. These keys and X.509 certificates are used to cryptographically authenticate traffic in the Istio service mesh, and the corresponding service account identities are used by Dikastes in authorization policy.

kubectl get secret 

NAME                   TYPE                                  DATA      AGE
customer-token-mgb8w   kubernetes.io/service-account-token   3         21h
database-token-nb5xp   kubernetes.io/service-account-token   3         21h
default-token-wwml6    kubernetes.io/service-account-token   3         21h
istio.customer         istio.io/key-and-cert                 3         21h
istio.database         istio.io/key-and-cert                 3         21h
istio.default          istio.io/key-and-cert                 3         21h
istio.summary          istio.io/key-and-cert                 3         21h
summary-token-8kpt1    kubernetes.io/service-account-token   3         21h

Determining Ingress IP & Port

You will use the istio-ingressgateway service to access the YAO Bank application.

External load balancers are not supported in the Vagrant test cluster. You can use the host IP of the ingress service, along with the NodePort, to access the ingress.

export GATEWAY_URL=$(kubectl get po -n istio-system -l istio=ingressgateway -o 'jsonpath={.items[0].status.hostIP}'):$(kubectl get svc istio-ingress -n istio-system -o 'jsonpath={.spec.ports[0].nodePort}')

Point your browser to http://$GATEWAY_URL/ to confirm the YAO Bank application is functioning correctly. It may take several minutes for all the services to come up and respond, during which time you may see 404 or 500 errors.

The need for policy

Although Calico & Istio are running in the cluster, we have not defined any authorization policy. Istio was configured to mutually authenticate traffic between the pods in your application, so only connections with Istio-issued certificates are allowed, and all inter-pod traffic is encrypted with TLS. That's already a big step in the right direction.

But, let's consider some deficiencies in this security architecture:

• All incoming connections from workloads in the Istio mesh are equally trusted
• Possession of a key & certificate pair is the only access credential considered.

To understand why these might be a problem, let's take them one at a time.

Trusting workloads

Trusting connections from any workload in the Istio mesh is a poor security architecture because, like Kubernetes, Istio is designed to host multiple applications. Some of those applications may not be as trusted as others. They may be operated by different users or teams with wildly different security requirements. We don't want our secure financial application microservices accessible from some hacky prototype another developer is cooking up.

Even within our own application, the best practice is to limit access as much as possible. Only pods that need access to a service should get it. Consider the YAO Bank application. The customer web service does not need, and should not have direct access to the backend database. The customer web service needs to directly interact with clients outside the cluster, some of whom may be malicious. Unfortunately, vulnerabilities in web applications are all too common. For example, an unpatched vulnerabiltiy in Apache Struts is what allowed attackers their initial access into the Equifax network where they then launched a devastating attack to steal millions of people's financial information.

Imagine what would happen if an attacker were to gain control of the customer web pod in our application.

Let's simulate this by exec'ing into that pod.

kubectl exec -ti customer-<fill in pod ID> -c customer bash

You should get a bash shell inside the customer pod. Notice that from here, we get direct access to the backend database. For example, we can list all the entries in the database like this:

curl http://database:2379/v2/keys?recursive=true | python -m json.tool

(Piping to python -m json.tool nicely formats the output.)

Single factor authorization

The possession of a key and certificate pair is a very strong assertion that a connection is authentic because it is based on cryptographic proofs that are believed to be nearly impossible to forge. When we authenticate connections this way we can say with extremely high confidence that the party on the other end is in possession of the corresponding key. However, this is only a proxy for what we actually want to be confident of: that the party on the other end really is the authorized workload we want to communicate with. Keeping the private key a secret is vital to this confidence, and occasionally attackers can find ways to trick applications into giving up secrets they should not. For example, the Heartbleed vulnerability in OpenSSL allowed attackers to trick an affected application into reading out portions of its memory, compromising private keys (among other confidential information).

Let's simulate an attacker who has stolen the private keys of another pod. Since the keys are stored as Kubernetes secrets, we won't exploit a vulnerability in a service, but instead just mount the secret in a pod that will simulate an attacker.

If you are still exec'd into the customer pod, exit out or open a new terminal tab (we will return the to the customer pod later).

kubectl apply -f config/demo/20-attack-pod.yaml

Take a look at the 20-attack-pod.yaml file in an editor. It creates an ubuntu pod and mounts istio.summary secret. This will allow us to masquerade as if we were the summary service, even though this pod is not run as that service account. Let's try this out. First, exec into the pod.

kubectl exec -ti attack-<fill in pod ID> bash

Next, install the curl utility to initiate HTTP connections from the command line.

apt update && apt install -y curl

Now, we will attack the database. Instead of listing the contents like we did before, let's try something more malicious, like changing the account balance with a PUT command.

curl -k https://database:2379/v2/keys/accounts/519940/balance -d value="10000.00" -XPUT --key /etc/certs/key.pem --cert /etc/certs/cert-chain.pem

Unlike when we did this with the customer web pod, we do not have the Istio Proxy to handle encryption, so we have to pass an https URL, the --key and --cert parameters to curl to do the cryptography.

Return to your web browser and refresh to confirm the new balance.

Policy

We can mitigate both of the above deficiencies with a Calico policy.

Apply the sample policy.

./calicoctl create -f config/demo/30-policy.yaml

Let's examine this policy piece by piece. It consists of 3 policy objects, one for each microservice.

apiVersion: projectcalico.org/v3
kind: GlobalNetworkPolicy
metadata:
  name: customer
spec:
  selector: app == 'customer'
  ingress:
    - action: Allow
      http:
        methods: ["GET"]
  egress:
    - action: Allow

This policy protects the customer web app. Since this application is customer facing, we do not restrict what can communicate with it. We do, however, restrict that only HTTP GET requests are allowed.

apiVersion: projectcalico.org/v3
kind: GlobalNetworkPolicy
metadata:
  name: summary
spec:
  selector: app == 'summary'
  ingress:
    - action: Allow
      source:
        serviceAccounts:
          names: ["customer"]
  egress:
    - action: Allow

The second policy protects the account summary microservice. We know the only consumer of this service is the customer web app, so we restrict the source of incoming connections to the service account for the customer web app.

apiVersion: projectcalico.org/v3
kind: GlobalNetworkPolicy
metadata:
  name: database
spec:
  selector: app == 'database'
  ingress:
    - action: Allow
      source:
        serviceAccounts:
          names: ["summary"]
  egress:
    - action: Allow

The third policy protects the database. Only the summary microservice should have direct access to the database.

Let's verify our policy is working as intended. First, return to your browser and refresh, to ensure policy enforcement has not broken the application.

Next, return to the customer web app. Recall that we simulated an attacker gaining control of that pod by execing into it.

kubectl exec -ti customer-<fill in pod ID> -c customer bash

Repeat our attempt to access the database.

curl http://database:2379/v2/keys?recursive=true

This time we should get a 403 Forbidden response (we have left out the JSON formatting because we do not expect to get a valid JSON response). Only the account summary microservice has database access according to our policy.

Finally, let's return to the attack pod that simulated stealing secret keys.

kubectl exec -ti attack-<fill in pod ID> bash

Let's repeat our attack with stolen keys (we'll further increase the account balance to highlight whether it succeeds).

curl -k https://database:2379/v2/keys/account/519940/balance -d value="99999.99" -XPUT --key /etc/certs/key.pem --cert /etc/certs/cert-chain.pem

If things are working correctly, you should get no response, and refreshing your browser should not show an increased balance.

You might wonder how Calico was able to detect and prevent this attack---the attacker was able to steal the keys which prove identity in our system. This highlights the value of multi-layer authorization checks. Although our attack pod had the keys to fool the X.509 certificate check, Calico also monitors the Kubernetes API Server for which IP addresses are associated with which service accounts. Since our attack pod has an IP not associated with the account summary service account we disallow the connection.

Known Limitations

• Only Allow rules can be used with Application Layer Policy selectors. If you use Deny or Pass rules they must be restricted to network layer selectors.
• Application Layer Policy selectors are only supported on ingress policy. If you use egress policy, you must restrict to network layer selectors.

FAQ

Can I use Dikastes with Istio Mixer?

Yes, you can use Dikastes with Mixer. Since Dikastes handles authorization checks, we expect most people will want to use Mixer primarily for reporting telemetry. Simply disable the Mixer checks (disablePolicyChecks: true), but keep report functionality on. If you decide to use both Dikastes and Mixer for authorization checks, keep in mind that requests must pass both checks in order to be allowed.