README
¶
Hermes
Hermes is a GossipSub listener and tracer. It subscribes to all relevant pubsub topics
and traces all protocol interactions. As of 2024-05-21, Hermes supports the Ethereum
network.
Table of Contents
Installation
go install github.com/probe-lab/hermes@latest
Developing
Check out the repository:
git clone git@github.com:probe-lab/hermes.git
Start Hermes by running
go run ./cmd/hermes # requires Go >=1.22
This should print this help text
NAME:
hermes - a gossipsub listener
USAGE:
hermes [global options] command [command options]
COMMANDS:
eth, ethereum Listen to gossipsub topics of the Ethereum network
help, h Shows a list of commands or help for one command
GLOBAL OPTIONS:
--help, -h show help
DataStream Configuration:
--data.stream.type value Format where the traces will be submitted: logger, kinesis, or callback. (default: "logger") [$HERMES_DATA_STREAM_TYPE]
--kinesis.region value The region of the AWS Kinesis Data Stream [$HERMES_KINESIS_REGION]
--kinesis.stream value The name of the AWS Kinesis Data Stream [$HERMES_KINESIS_DATA_STREAM]
Logging Configuration:
--log.format value Sets the format to output the log statements in: text, json, hlog, tint (default: "hlog") [$HERMES_LOG_FORMAT]
--log.level value Sets an explicity logging level: debug, info, warn, error. Takes precedence over the verbose flag. (default: "info") [$HERMES_LOG_LEVEL]
--log.nocolor Whether to prevent the logger from outputting colored log statements (default: false) [$HERMES_LOG_NO_COLOR]
--log.source Compute the source code position of a log statement and add a SourceKey attribute to the output. Only text and json formats. (default: false) [$HERMES_LOG_SOURCE]
--verbose, -v Set logging level more verbose to include debug level logs (default: false) [$HERMES_VERBOSE]
Telemetry Configuration:
--metrics Whether to expose metrics information (default: false) [$HERMES_METRICS_ENABLED]
--metrics.addr value Which network interface should the metrics endpoint bind to. (default: "localhost") [$HERMES_METRICS_ADDR]
--metrics.port value On which port should the metrics endpoint listen (default: 6060) [$HERMES_METRICS_PORT]
--tracing Whether to emit trace data (default: false) [$HERMES_TRACING_ENABLED]
--tracing.addr value Where to publish the traces to. (default: "localhost") [$HERMES_TRACING_ADDR]
--tracing.port value On which port does the traces collector listen (default: 4317) [$HERMES_TRACING_PORT]
CLI Arguments
We use dot notation to namespace command line arguments instead of hyphens because the CLI library allows
to configuration parameters from a file which will then resolve the command line parameters. For example,
the CLI flag --log.format could be read from a yaml file that looks like this:
log:
format: json
However, Hermes currently doesn't support loading CLI arguments from a file ¯_(ツ)_/¯.
Deployment
Depending on the network you want to trace Hermes requires auxiliary infrastructure.
As of 2024-03-27, Hermes supports these networks:
General
Hermes currently only supports emitting events to AWS Kinesis. We're using our own producer library to do that.
In order to hook up Hermes with AWS Kinesis you need to provide the following command line flags:
--kinesis.region=us-east-1# us-east-1 is the default--kinesis.stream=$YOUR_DATA_STREAM_NAME
If the name is set, Hermes will start pumping events to that stream.
It's important to note that the events will not be strictly ordered. They will only follow a lose ordering. The reasons are 1) potential retries of event submissions and 2) record aggregation. Depending on the configured number of submission retries the events should be ordered within each 30s time window.
Ethereum
In order to run Hermes in the Ethereum network you are required to run a Prysm beacon node. Hermes requires Prysm over other implementations because as far as I know it's the only implementation that allows dynamic registration of trusted peers. For example, Lighthouse requires the list of trusted peers at boot time.
Further, Hermes requires beacon node in general because it delegates certain requests to it. In the case of the Ethereum network Hermes forwards all requests for the following protocols:
/eth2/beacon_chain/req/beacon_blocks_by_range/2/ssz_snappy/eth2/beacon_chain/req/beacon_blocks_by_root/2/ssz_snappy/eth2/beacon_chain/req/blob_sidecars_by_range/1/ssz_snappy/eth2/beacon_chain/req/blob_sidecars_by_root/1/ssz_snappy
These request handlers require knowledge of the chain state wherefore Hermes cannot handle them itself. Still, they are required to be a good citizen of the network and not get pruned by other peers.
To run Hermes for the Ethereum network you would need to point it to the beacon node by providing the
--prysm.host=1.2.3.4--prysm.port.http=3500# 3500 is the default--prysm.port.grpc=4000# 4000 is the default
command line flags to the hermes ethereum subcommand. Check out the help page via hermes ethereum --help for configuration options of the libp2p host or devp2p local node (e.g., listen addrs/ports).
Hermes' Ethereum Help Page
NAME:
hermes eth - Listen to gossipsub topics of the Ethereum network
USAGE:
hermes eth command [command options]
COMMANDS:
ids generates peer identities in csv format
chains List all supported chains
help, h Shows a list of commands or help for one command
OPTIONS:
--key value, -k value The private key for the hermes libp2p/ethereum node in hex format. [$HERMES_ETH_KEY]
--chain value The beacon chain to participate in. (default: "mainnet") [$HERMES_ETH_CHAIN]
--attnets value, -a value The attestation network digest. (default: "ffffffffffffffff") [$HERMES_ETH_ATTNETS]
--dial.concurrency value The maximum number of parallel workers dialing other peers in the network (default: 16) [$HERMES_ETH_DIAL_CONCURRENCY]
--dial.timeout value The request timeout when contacting other network participants (default: 5s) [$HERMES_ETH_DIAL_TIMEOUT]
--devp2p.host value Which network interface should devp2p (discv5) bind to. (default: "127.0.0.1") [$HERMES_ETH_DEVP2P_HOST]
--devp2p.port value On which port should devp2p (disv5) listen (default: random) [$HERMES_ETH_DEVP2P_PORT]
--libp2p.host value Which network interface should libp2p bind to. (default: "127.0.0.1") [$HERMES_ETH_LIBP2P_HOST]
--libp2p.port value On which port should libp2p (disv5) listen (default: random) [$HERMES_ETH_LIBP2P_PORT]
--prysm.host value The host ip/name where Prysm's (beacon) API is accessible [$HERMES_ETH_PRYSM_HOST]
--prysm.port.http value The port on which Prysm's beacon nodes' Query HTTP API is listening on (default: 3500) [$HERMES_ETH_PRYSM_PORT_HTTP]
--prysm.port.grpc value The port on which Prysm's gRPC API is listening on (default: 4000) [$HERMES_ETH_PRYSM_PORT_GRPC]
--max-peers value The maximum number of peers we want to be connected with (default: 30) [$HERMES_ETH_MAX_PEERS]
--help, -h show help
Telemetry
Metrics
When you provide the --metrics command line flag Hermes will expose a Prometheus HTTP endpoint at localhost:6060. Host and port are configurable via --metrics.addr and --metrics.port.
Tracing
Run an OpenTelemetry Collector compatible trace collector like Jaeger:
docker run --name jaeger \
-e COLLECTOR_OTLP_ENABLED=true \
-p 16686:16686 \
-p 4317:4317 \
--rm jaegertracing/all-in-one:1.54
You can find the UI at http://localhost:16686. Port 4317 is used by Hermes to export traces to.
Run Hermes with the --tracing flag. To change the address of the trace collector, you can also specify --tracing.addr and --tracing.port.
Differences with other tools
Hermes jumps to the web3/blockchain/libp2p ecosystem despite a large variety of tools around it, such as the many existing network crawlers or light clients for most mature networks. Although at first sight it might look like a competitor to those, there was still a large incentive to develop it. Here, we describe the gap that Hermes fills as well as the use-cases that it is suitable for. Hermes was designed to behave as a light node in each supported network, where, in addition to being an honest participant in the network and supporting all the protocols and RPC endpoints, it also allows streaming of custom internal events (mostly libp2p-related).
Hermes avoids being based on a custom fork of existing full/light clients, which would come with non-negligible maintenance baggage and would complicate having control of events.
Currently available similar tools:
Armiarma Crawler from MigaLabs vs Hermes from ProbeLab
Although both Hermes and Armiarma seem to be focusing on the same goals at first sight, they have significant differences in their use cases and their targets in data collection and metrics.
Armiarma is a network crawler that relies on running discv5 peer discovery service and a libp2p host 24/7 to establish connections. However, significant modifications have been made to connect to as many peers as possible (custom peering module). This way, it tries to identify as many peers as possible in the network periodically. Thus, its focus is mainly on opening and identifying as many peers as possible, rather than maintaining stable connections to other peers in the network.
On the other hand, although Hermes also relies on a continuously running discv5 and libp2p host, it uses the libp2p connection manager for a different purpose to Armiarma (which is to connect to as many peers as possible). In the case of Hermes, the connection manager is used to decide who it connects to (i.e., simulating the behaviour of a standard node). Furthermore, it backs up some of the RPC, which requires keeping the chain db calls on a trusted node. This way, it behaves like a light node to the network, which is honest and beneficial for the rest of the network, allowing us to track all desired networking events from stable connections, while at the same time having a highly customizable tracing system.
Maintainers
Contributing
Contributions are welcome!
Please take a look at the issues.
Directories