Pyrolytic graphite temperature experiment
Rational
It has been found in an
experiment
that graphene vibrates thus producing usable energy.
Pyrolytic graphite is composed of many layers of graphene, so it should be warmer than the
surrounding environment.
Experiment Setup
The experiment consists of one k type thermocouple attached to
pyrolytic graphite in a thermally
insulating container. Another thermocouple is outside of the container. Both thermocouples are
attached to a thermometer.
![setup](https://github.com/pointlander/graphene/raw/fff1ea1a896f/setup.png)
Experimental Results
The experiment measured the temperature difference between the two thermocouples averaged over a period
of about 80 minutes. On average the difference was found to be ~0.8F. The error in the measurement was
found to be less than 0.1F. The control experiment found the difference to be ~0.5F. This indicates that
the pyrolytic graphite is producing heat. The experiment was conducted at a room temperature of ~70F.
Materials
Potential error
Pyrolytic graphite is conductive, so this could impact the thermocouple, but this would probably be noticable
in the meter readings.
Data
Pyrolytic graphite experiment - log1.csv
- average=0.764198
- corr=0.334671
![log1.csv](https://github.com/pointlander/graphene/raw/fff1ea1a896f/log1.png)
Pyrolytic graphite experiment with heat shrink tubing - log4.csv
- average=0.575000
- corr=-0.064983
![log4.csv](https://github.com/pointlander/graphene/raw/fff1ea1a896f/log4.png)
Pyrolytic graphite experiment with heat shrink tubing - 8 hours - night - log5.csv
- average=0.423647
- corr=0.825082
![log5.csv](https://github.com/pointlander/graphene/raw/fff1ea1a896f/log5.png)
Pyrolytic graphite experiment with heat shrink tubing - 8 hours - day - log6.csv
- average=0.437475
- corr=0.885628
![log6.csv](https://github.com/pointlander/graphene/raw/fff1ea1a896f/log6.png)
Thermos Pyrolytic graphite experiment with heat shrink tubing - 8 hours - night - log9.csv
- average=0.196794
- corr=0.936163
![log9.csv](https://github.com/pointlander/graphene/raw/fff1ea1a896f/log9.png)
Thermos graphene in water experiment with liquid probe - 8 hours - night - log10.csv
- average=0.585571
- corr=0.076168
![log10.csv](https://github.com/pointlander/graphene/raw/fff1ea1a896f/log10.png)
Calibration - log2.csv
- average=0.007059
- corr=0.993329
![log2.csv](https://github.com/pointlander/graphene/raw/fff1ea1a896f/log2.png)
Control - log3.csv
- average=0.460714
- corr=0.863758
![log3.csv](https://github.com/pointlander/graphene/raw/fff1ea1a896f/log3.png)
Control - 8 hours - night - log7.csv
- average=0.438677
- corr=0.574128
![log7.csv](https://github.com/pointlander/graphene/raw/fff1ea1a896f/log7.png)
Thermos Control - 8 hours - day - log8.csv
- average=0.047695
- corr=0.971811
![log8.csv](https://github.com/pointlander/graphene/raw/fff1ea1a896f/log8.png)