ice

package module
v0.7.13 Latest Latest
Warning

This package is not in the latest version of its module.

 Go to latest Published: Apr 25, 2020 License: MIT Imports: 21 Imported by: 8

README


Pion ICE

A Go implementation of ICE

Pion transport Slack Widget
Build Status GoDoc Coverage Status Go Report Card


Roadmap

The library is used as a part of our WebRTC implementation. Please refer to that roadmap to track our major milestones.

Community

Pion has an active community on the Golang Slack. Sign up and join the #pion channel for discussions and support. You can also use Pion mailing list.

We are always looking to support your projects. Please reach out if you have something to build!

If you need commercial support or don't want to use public methods you can contact us at team@pion.ly

Contributing

Check out the contributing wiki to join the group of amazing people making this project possible:

License

MIT License - see LICENSE for full text

Documentation

Overview

Package ice implements the Interactive Connectivity Establishment (ICE) protocol defined in rfc5245.

Package ice ...

Index

Constants

View Source 
const (

	// ComponentRTP indicates that the candidate is used for RTP
	ComponentRTP uint16 = 1
	// ComponentRTCP indicates that the candidate is used for RTCP
	ComponentRTCP
)
View Source 
const (
	// CandidatePairStateWaiting means a check has not been performed for
	// this pair
	CandidatePairStateWaiting = iota + 1

	// CandidatePairStateInProgress means a check has been sent for this pair,
	// but the transaction is in progress.
	CandidatePairStateInProgress

	// CandidatePairStateFailed means a check for this pair was already done
	// and failed, either never producing any response or producing an unrecoverable
	// failure response.
	CandidatePairStateFailed

	// CandidatePairStateSucceeded means a check for this pair was already
	// done and produced a successful result.
	CandidatePairStateSucceeded
)
View Source 
const (
	// ConnectionStateNew ICE agent is gathering addresses
	ConnectionStateNew = iota + 1

	// ConnectionStateChecking ICE agent has been given local and remote candidates, and is attempting to find a match
	ConnectionStateChecking

	// ConnectionStateConnected ICE agent has a pairing, but is still checking other pairs
	ConnectionStateConnected

	// ConnectionStateCompleted ICE agent has finished
	ConnectionStateCompleted

	// ConnectionStateFailed ICE agent never could successfully connect
	ConnectionStateFailed

	// ConnectionStateDisconnected ICE agent connected successfully, but has entered a failed state
	ConnectionStateDisconnected

	// ConnectionStateClosed ICE agent has finished and is no longer handling requests
	ConnectionStateClosed
)

List of supported States

View Source 
const Unknown = iota

Unknown defines default public constant to use for "enum" like struct comparisons when no value was defined.

Variables

View Source 
var (
	// ErrUnknownType indicates an error with Unknown info.
	ErrUnknownType = errors.New("Unknown")

	// ErrSchemeType indicates the scheme type could not be parsed.
	ErrSchemeType = errors.New("unknown scheme type")

	// ErrSTUNQuery indicates query arguments are provided in a STUN URL.
	ErrSTUNQuery = errors.New("queries not supported in stun address")

	// ErrInvalidQuery indicates an malformed query is provided.
	ErrInvalidQuery = errors.New("invalid query")

	// ErrHost indicates malformed hostname is provided.
	ErrHost = errors.New("invalid hostname")

	// ErrPort indicates malformed port is provided.
	ErrPort = errors.New("invalid port")

	// ErrLocalUfragInsufficientBits indicates local username fragment insufficient bits are provided.
	// Have to be at least 24 bits long
	ErrLocalUfragInsufficientBits = errors.New("local username fragment is less than 24 bits long")

	// ErrLocalPwdInsufficientBits indicates local passoword insufficient bits are provided.
	// Have to be at least 128 bits long
	ErrLocalPwdInsufficientBits = errors.New("local password is less than 128 bits long")

	// ErrProtoType indicates an unsupported transport type was provided.
	ErrProtoType = errors.New("invalid transport protocol type")

	// ErrClosed indicates the agent is closed
	ErrClosed = errors.New("the agent is closed")

	// ErrNoCandidatePairs indicates agent does not have a valid candidate pair
	ErrNoCandidatePairs = errors.New("no candidate pairs available")

	// ErrCanceledByCaller indicates agent connection was canceled by the caller
	ErrCanceledByCaller = errors.New("connecting canceled by caller")

	// ErrMultipleStart indicates agent was started twice
	ErrMultipleStart = errors.New("attempted to start agent twice")

	// ErrRemoteUfragEmpty indicates agent was started with an empty remote ufrag
	ErrRemoteUfragEmpty = errors.New("remote ufrag is empty")

	// ErrRemotePwdEmpty indicates agent was started with an empty remote pwd
	ErrRemotePwdEmpty = errors.New("remote pwd is empty")

	// ErrNoOnCandidateHandler indicates agent was started without OnCandidate
	// while running in trickle mode.
	ErrNoOnCandidateHandler = errors.New("no OnCandidate provided")

	// ErrMultipleGatherAttempted indicates GatherCandidates has been called multiple times
	ErrMultipleGatherAttempted = errors.New("attempting to gather candidates during gathering state")

	// ErrUsernameEmpty indicates agent was give TURN URL with an empty Username
	ErrUsernameEmpty = errors.New("username is empty")

	// ErrPasswordEmpty indicates agent was give TURN URL with an empty Password
	ErrPasswordEmpty = errors.New("password is empty")

	// ErrAddressParseFailed indicates we were unable to parse a candidate address
	ErrAddressParseFailed = errors.New("failed to parse address")

	// ErrLiteUsingNonHostCandidates indicates non host candidates were selected for a lite agent
	ErrLiteUsingNonHostCandidates = errors.New("lite agents must only use host candidates")

	// ErrUselessUrlsProvided indicates that one or more URL was provided to the agent but no host
	// candidate required them
	ErrUselessUrlsProvided = errors.New("agent does not need URL with selected candidate types")

	// ErrUnsupportedNAT1To1IPCandidateType indicates that the specified NAT1To1IPCandidateType is
	// unsupported
	ErrUnsupportedNAT1To1IPCandidateType = errors.New("unsupported 1:1 NAT IP candidate type")

	// ErrInvalidNAT1To1IPMapping indicates that the given 1:1 NAT IP mapping is invalid
	ErrInvalidNAT1To1IPMapping = errors.New("invalid 1:1 NAT IP mapping")

	// ErrExternalMappedIPNotFound in NAT1To1IPMapping
	ErrExternalMappedIPNotFound = errors.New("external mapped IP not found")

	// ErrMulticastDNSWithNAT1To1IPMapping indicates that the mDNS gathering cannot be used along
	// with 1:1 NAT IP mapping for host candidate.
	ErrMulticastDNSWithNAT1To1IPMapping = errors.New("mDNS gathering cannot be used with 1:1 NAT IP mapping for host candidate")

	// ErrIneffectiveNAT1To1IPMappingHost indicates that 1:1 NAT IP mapping for host candidate is
	// requested, but the host candidate type is disabled.
	ErrIneffectiveNAT1To1IPMappingHost = errors.New("1:1 NAT IP mapping for host candidate ineffective")

	// ErrIneffectiveNAT1To1IPMappingSrflx indicates that 1:1 NAT IP mapping for srflx candidate is
	// requested, but the srflx candidate type is disabled.
	ErrIneffectiveNAT1To1IPMappingSrflx = errors.New("1:1 NAT IP mapping for srflx candidate ineffective")

	// ErrInvalidMulticastDNSHostName indicates an invalid MulticastDNSHostName
	ErrInvalidMulticastDNSHostName = errors.New("invalid mDNS HostName, must end with .local and can only contain a single '.'")
)

Functions

This section is empty.

Types

type Agent 

type Agent struct {
	// contains filtered or unexported fields
}

Agent represents the ICE agent

func NewAgent 

func NewAgent(config *AgentConfig) (*Agent, error)

NewAgent creates a new Agent

func (*Agent) Accept 

func (a *Agent) Accept(ctx context.Context, remoteUfrag, remotePwd string) (*Conn, error)

Accept connects to the remote agent, acting as the controlled ice agent. Accept blocks until at least one ice candidate pair has successfully connected.

func (*Agent) AddRemoteCandidate 

func (a *Agent) AddRemoteCandidate(c Candidate) error

AddRemoteCandidate adds a new remote candidate

func (*Agent) Close 

func (a *Agent) Close() error

Close cleans up the Agent

func (*Agent) Dial 

func (a *Agent) Dial(ctx context.Context, remoteUfrag, remotePwd string) (*Conn, error)

Dial connects to the remote agent, acting as the controlling ice agent. Dial blocks until at least one ice candidate pair has successfully connected.

func (*Agent) GatherCandidates added in v0.3.2 

func (a *Agent) GatherCandidates() error

GatherCandidates initiates the trickle based gathering process.

func (*Agent) GetCandidatePairsStats added in v0.4.1 

func (a *Agent) GetCandidatePairsStats() []CandidatePairStats

GetCandidatePairsStats returns a list of candidate pair stats

func (*Agent) GetLocalCandidates 

func (a *Agent) GetLocalCandidates() ([]Candidate, error)

GetLocalCandidates returns the local candidates

func (*Agent) GetLocalCandidatesStats added in v0.4.1 

func (a *Agent) GetLocalCandidatesStats() []CandidateStats

GetLocalCandidatesStats returns a list of local candidates stats

func (*Agent) GetLocalUserCredentials 

func (a *Agent) GetLocalUserCredentials() (frag string, pwd string)

GetLocalUserCredentials returns the local user credentials

func (*Agent) GetRemoteCandidatesStats added in v0.4.1 

func (a *Agent) GetRemoteCandidatesStats() []CandidateStats

GetRemoteCandidatesStats returns a list of remote candidates stats

func (*Agent) OnCandidate added in v0.3.2 

func (a *Agent) OnCandidate(f func(Candidate)) error

OnCandidate sets a handler that is fired when new candidates gathered. When the gathering process complete the last candidate is nil.

func (*Agent) OnConnectionStateChange 

func (a *Agent) OnConnectionStateChange(f func(ConnectionState)) error

OnConnectionStateChange sets a handler that is fired when the connection state changes

func (*Agent) OnSelectedCandidatePairChange 

func (a *Agent) OnSelectedCandidatePairChange(f func(Candidate, Candidate)) error

OnSelectedCandidatePairChange sets a handler that is fired when the final candidate pair is selected

type AgentConfig 

type AgentConfig struct {
	Urls []*URL

	// PortMin and PortMax are optional. Leave them 0 for the default UDP port allocation strategy.
	PortMin uint16
	PortMax uint16

	// LocalUfrag and LocalPwd values used to perform connectivity
	// checks.  The values MUST be unguessable, with at least 128 bits of
	// random number generator output used to generate the password, and
	// at least 24 bits of output to generate the username fragment.
	LocalUfrag string
	LocalPwd   string

	// Trickle specifies whether or not ice agent should trickle candidates or
	// work perform synchronous gathering.
	Trickle bool

	// MulticastDNSMode controls mDNS behavior for the ICE agent
	MulticastDNSMode MulticastDNSMode

	// MulticastDNSHostName controls the hostname for this agent. If none is specified a random one will be generated
	MulticastDNSHostName string

	// ConnectionTimeout defaults to 30 seconds when this property is nil.
	// If the duration is 0, we will never timeout this connection.
	ConnectionTimeout *time.Duration
	// KeepaliveInterval determines how often should we send ICE
	// keepalives (should be less then connectiontimeout above)
	// when this is nil, it defaults to 10 seconds.
	// A keepalive interval of 0 means we never send keepalive packets
	KeepaliveInterval *time.Duration

	// NetworkTypes is an optional configuration for disabling or enabling
	// support for specific network types.
	NetworkTypes []NetworkType

	// CandidateTypes is an optional configuration for disabling or enabling
	// support for specific candidate types.
	CandidateTypes []CandidateType

	LoggerFactory logging.LoggerFactory

	// MaxBindingRequests is the max amount of binding requests the agent will send
	// over a candidate pair for validation or nomination, if after MaxBindingRequests
	// the candidate is yet to answer a binding request or a nomination we set the pair as failed
	MaxBindingRequests *uint16

	// CandidatesSelectionTimeout specify a timeout for selecting candidates, if no nomination has happen
	// before this timeout, once hit we will nominate the best valid candidate available,
	// or mark the connection as failed if no valid candidate is available
	CandidateSelectionTimeout *time.Duration

	// Lite agents do not perform connectivity check and only provide host candidates.
	Lite bool

	// NAT1To1IPCandidateType is used along with NAT1To1IPs to specify which candidate type
	// the 1:1 NAT IP addresses should be mapped to.
	// If unspecified or CandidateTypeHost, NAT1To1IPs are used to replace host candidate IPs.
	// If CandidateTypeServerReflexive, it will insert a srflx candidate (as if it was dervied
	// from a STUN server) with its port number being the one for the actual host candidate.
	// Other values will result in an error.
	NAT1To1IPCandidateType CandidateType

	// NAT1To1IPs contains a list of public IP addresses that are to be used as a host
	// candidate or srflx candidate. This is used typically for servers that are behind
	// 1:1 D-NAT (e.g. AWS EC2 instances) and to eliminate the need of server reflexisive
	// candidate gathering.
	NAT1To1IPs []string

	// HostAcceptanceMinWait specify a minimum wait time before selecting host candidates
	HostAcceptanceMinWait *time.Duration
	// HostAcceptanceMinWait specify a minimum wait time before selecting srflx candidates
	SrflxAcceptanceMinWait *time.Duration
	// HostAcceptanceMinWait specify a minimum wait time before selecting prflx candidates
	PrflxAcceptanceMinWait *time.Duration
	// HostAcceptanceMinWait specify a minimum wait time before selecting relay candidates
	RelayAcceptanceMinWait *time.Duration

	// Net is the our abstracted network interface for internal development purpose only
	// (see github.com/pion/transport/vnet)
	Net *vnet.Net

	// InterfaceFilter is a function that you can use in order to  whitelist or blacklist
	// the interfaces which are used to gather ICE candidates.
	InterfaceFilter func(string) bool

	// InsecureSkipVerify controls if self-signed certificates are accepted when connecting
	// to TURN servers via TLS or DTLS
	InsecureSkipVerify bool
	// contains filtered or unexported fields
}

AgentConfig collects the arguments to ice.Agent construction into a single structure, for future-proofness of the interface

type AttrControl added in v0.2.9 

type AttrControl struct {
	Role       Role
	Tiebreaker uint64
}

AttrControl is helper that wraps ICE-{CONTROLLED,CONTROLLING}.

func (AttrControl) AddTo added in v0.2.9 

func (c AttrControl) AddTo(m *stun.Message) error

AddTo adds ICE-CONTROLLED or ICE-CONTROLLING attribute depending on Role.

func (*AttrControl) GetFrom added in v0.2.9 

func (c *AttrControl) GetFrom(m *stun.Message) error

GetFrom decodes Role and Tiebreaker value from message.

type AttrControlled added in v0.2.9 

type AttrControlled uint64

AttrControlled represents ICE-CONTROLLED attribute.

func (AttrControlled) AddTo added in v0.2.9 

func (c AttrControlled) AddTo(m *stun.Message) error

AddTo adds ICE-CONTROLLED to message.

func (*AttrControlled) GetFrom added in v0.2.9 

func (c *AttrControlled) GetFrom(m *stun.Message) error

GetFrom decodes ICE-CONTROLLED from message.

type AttrControlling added in v0.2.9 

type AttrControlling uint64

AttrControlling represents ICE-CONTROLLING attribute.

func (AttrControlling) AddTo added in v0.2.9 

func (c AttrControlling) AddTo(m *stun.Message) error

AddTo adds ICE-CONTROLLING to message.

func (*AttrControlling) GetFrom added in v0.2.9 

func (c *AttrControlling) GetFrom(m *stun.Message) error

GetFrom decodes ICE-CONTROLLING from message.

type Candidate 

type Candidate interface {
	ID() string
	Component() uint16
	Address() string
	LastReceived() time.Time
	LastSent() time.Time
	NetworkType() NetworkType
	Port() int
	Priority() uint32
	RelatedAddress() *CandidateRelatedAddress
	String() string
	Type() CandidateType

	Equal(other Candidate) bool
	// contains filtered or unexported methods
}

Candidate represents an ICE candidate

type CandidateHost added in v0.3.0 

type CandidateHost struct {
	// contains filtered or unexported fields
}

CandidateHost is a candidate of type host

func NewCandidateHost 

func NewCandidateHost(config *CandidateHostConfig) (*CandidateHost, error)

NewCandidateHost creates a new host candidate

func (*CandidateHost) Address added in v0.4.0 

func (c *CandidateHost) Address() string

Address returns Candidate Address

func (*CandidateHost) Component added in v0.3.0 

func (c *CandidateHost) Component() uint16

Component returns candidate component

func (*CandidateHost) Equal added in v0.3.0 

func (c *CandidateHost) Equal(other Candidate) bool

Equal is used to compare two candidateBases

func (*CandidateHost) ID added in v0.4.1 

func (c *CandidateHost) ID() string

ID returns Candidate ID

func (*CandidateHost) LastReceived added in v0.3.0 

func (c *CandidateHost) LastReceived() time.Time

LastReceived returns a time.Time indicating the last time this candidate was received

func (*CandidateHost) LastSent added in v0.3.0 

func (c *CandidateHost) LastSent() time.Time

LastSent returns a time.Time indicating the last time this candidate was sent

func (*CandidateHost) LocalPreference added in v0.3.0 

func (c *CandidateHost) LocalPreference() uint16

LocalPreference returns the local preference for this candidate

func (*CandidateHost) NetworkType added in v0.3.0 

func (c *CandidateHost) NetworkType() NetworkType

NetworkType returns candidate NetworkType

func (*CandidateHost) Port added in v0.3.0 

func (c *CandidateHost) Port() int

Port returns Candidate Port

func (*CandidateHost) Priority added in v0.3.0 

func (c *CandidateHost) Priority() uint32

Priority computes the priority for this ICE Candidate

func (*CandidateHost) RelatedAddress added in v0.3.0 

func (c *CandidateHost) RelatedAddress() *CandidateRelatedAddress

RelatedAddress returns *CandidateRelatedAddress

func (*CandidateHost) String added in v0.3.0 

func (c *CandidateHost) String() string

String makes the candidateBase printable

func (*CandidateHost) Type added in v0.3.0 

func (c *CandidateHost) Type() CandidateType

Type returns candidate type

type CandidateHostConfig added in v0.4.2 

type CandidateHostConfig struct {
	CandidateID string
	Network     string
	Address     string
	Port        int
	Component   uint16
}

CandidateHostConfig is the config required to create a new CandidateHost

type CandidatePairState added in v0.4.1 

type CandidatePairState int

CandidatePairState represent the ICE candidate pair state

func (CandidatePairState) String added in v0.4.1 

func (c CandidatePairState) String() string

type CandidatePairStats added in v0.4.1 

type CandidatePairStats struct {
	// Timestamp is the timestamp associated with this object.
	Timestamp time.Time

	// LocalCandidateID is the ID of the local candidate
	LocalCandidateID string

	// RemoteCandidateID is the ID of the remote candidate
	RemoteCandidateID string

	// State represents the state of the checklist for the local and remote
	// candidates in a pair.
	State CandidatePairState

	// Nominated is true when this valid pair that should be used for media
	// if it is the highest-priority one amongst those whose nominated flag is set
	Nominated bool

	// PacketsSent represents the total number of packets sent on this candidate pair.
	PacketsSent uint32

	// PacketsReceived represents the total number of packets received on this candidate pair.
	PacketsReceived uint32

	// BytesSent represents the total number of payload bytes sent on this candidate pair
	// not including headers or padding.
	BytesSent uint64

	// BytesReceived represents the total number of payload bytes received on this candidate pair
	// not including headers or padding.
	BytesReceived uint64

	// LastPacketSentTimestamp represents the timestamp at which the last packet was
	// sent on this particular candidate pair, excluding STUN packets.
	LastPacketSentTimestamp time.Time

	// LastPacketReceivedTimestamp represents the timestamp at which the last packet
	// was received on this particular candidate pair, excluding STUN packets.
	LastPacketReceivedTimestamp time.Time

	// FirstRequestTimestamp represents the timestamp at which the first STUN request
	// was sent on this particular candidate pair.
	FirstRequestTimestamp time.Time

	// LastRequestTimestamp represents the timestamp at which the last STUN request
	// was sent on this particular candidate pair. The average interval between two
	// consecutive connectivity checks sent can be calculated with
	// (LastRequestTimestamp - FirstRequestTimestamp) / RequestsSent.
	LastRequestTimestamp time.Time

	// LastResponseTimestamp represents the timestamp at which the last STUN response
	// was received on this particular candidate pair.
	LastResponseTimestamp time.Time

	// TotalRoundTripTime represents the sum of all round trip time measurements
	// in seconds since the beginning of the session, based on STUN connectivity
	// check responses (ResponsesReceived), including those that reply to requests
	// that are sent in order to verify consent. The average round trip time can
	// be computed from TotalRoundTripTime by dividing it by ResponsesReceived.
	TotalRoundTripTime float64

	// CurrentRoundTripTime represents the latest round trip time measured in seconds,
	// computed from both STUN connectivity checks, including those that are sent
	// for consent verification.
	CurrentRoundTripTime float64

	// AvailableOutgoingBitrate is calculated by the underlying congestion control
	// by combining the available bitrate for all the outgoing RTP streams using
	// this candidate pair. The bitrate measurement does not count the size of the
	// IP or other transport layers like TCP or UDP. It is similar to the TIAS defined
	// in RFC 3890, i.e., it is measured in bits per second and the bitrate is calculated
	// over a 1 second window.
	AvailableOutgoingBitrate float64

	// AvailableIncomingBitrate is calculated by the underlying congestion control
	// by combining the available bitrate for all the incoming RTP streams using
	// this candidate pair. The bitrate measurement does not count the size of the
	// IP or other transport layers like TCP or UDP. It is similar to the TIAS defined
	// in  RFC 3890, i.e., it is measured in bits per second and the bitrate is
	// calculated over a 1 second window.
	AvailableIncomingBitrate float64

	// CircuitBreakerTriggerCount represents the number of times the circuit breaker
	// is triggered for this particular 5-tuple, ceasing transmission.
	CircuitBreakerTriggerCount uint32

	// RequestsReceived represents the total number of connectivity check requests
	// received (including retransmissions). It is impossible for the receiver to
	// tell whether the request was sent in order to check connectivity or check
	// consent, so all connectivity checks requests are counted here.
	RequestsReceived uint64

	// RequestsSent represents the total number of connectivity check requests
	// sent (not including retransmissions).
	RequestsSent uint64

	// ResponsesReceived represents the total number of connectivity check responses received.
	ResponsesReceived uint64

	// ResponsesSent epresents the total number of connectivity check responses sent.
	// Since we cannot distinguish connectivity check requests and consent requests,
	// all responses are counted.
	ResponsesSent uint64

	// RetransmissionsReceived represents the total number of connectivity check
	// request retransmissions received.
	RetransmissionsReceived uint64

	// RetransmissionsSent represents the total number of connectivity check
	// request retransmissions sent.
	RetransmissionsSent uint64

	// ConsentRequestsSent represents the total number of consent requests sent.
	ConsentRequestsSent uint64

	// ConsentExpiredTimestamp represents the timestamp at which the latest valid
	// STUN binding response expired.
	ConsentExpiredTimestamp time.Time
}

CandidatePairStats contains ICE candidate pair statistics

type CandidatePeerReflexive added in v0.3.0 

type CandidatePeerReflexive struct {
	// contains filtered or unexported fields
}

CandidatePeerReflexive ...

func NewCandidatePeerReflexive 

func NewCandidatePeerReflexive(config *CandidatePeerReflexiveConfig) (*CandidatePeerReflexive, error)

NewCandidatePeerReflexive creates a new peer reflective candidate

func (*CandidatePeerReflexive) Address added in v0.4.0 

func (c *CandidatePeerReflexive) Address() string

Address returns Candidate Address

func (*CandidatePeerReflexive) Component added in v0.3.0 

func (c *CandidatePeerReflexive) Component() uint16

Component returns candidate component

func (*CandidatePeerReflexive) Equal added in v0.3.0 

func (c *CandidatePeerReflexive) Equal(other Candidate) bool

Equal is used to compare two candidateBases

func (*CandidatePeerReflexive) ID added in v0.4.1 

func (c *CandidatePeerReflexive) ID() string

ID returns Candidate ID

func (*CandidatePeerReflexive) LastReceived added in v0.3.0 

func (c *CandidatePeerReflexive) LastReceived() time.Time

LastReceived returns a time.Time indicating the last time this candidate was received

func (*CandidatePeerReflexive) LastSent added in v0.3.0 

func (c *CandidatePeerReflexive) LastSent() time.Time

LastSent returns a time.Time indicating the last time this candidate was sent

func (*CandidatePeerReflexive) LocalPreference added in v0.3.0 

func (c *CandidatePeerReflexive) LocalPreference() uint16

LocalPreference returns the local preference for this candidate

func (*CandidatePeerReflexive) NetworkType added in v0.3.0 

func (c *CandidatePeerReflexive) NetworkType() NetworkType

NetworkType returns candidate NetworkType

func (*CandidatePeerReflexive) Port added in v0.3.0 

func (c *CandidatePeerReflexive) Port() int

Port returns Candidate Port

func (*CandidatePeerReflexive) Priority added in v0.3.0 

func (c *CandidatePeerReflexive) Priority() uint32

Priority computes the priority for this ICE Candidate

func (*CandidatePeerReflexive) RelatedAddress added in v0.3.0 

func (c *CandidatePeerReflexive) RelatedAddress() *CandidateRelatedAddress

RelatedAddress returns *CandidateRelatedAddress

func (*CandidatePeerReflexive) String added in v0.3.0 

func (c *CandidatePeerReflexive) String() string

String makes the candidateBase printable

func (*CandidatePeerReflexive) Type added in v0.3.0 

func (c *CandidatePeerReflexive) Type() CandidateType

Type returns candidate type

type CandidatePeerReflexiveConfig added in v0.4.2 

type CandidatePeerReflexiveConfig struct {
	CandidateID string
	Network     string
	Address     string
	Port        int
	Component   uint16
	RelAddr     string
	RelPort     int
}

CandidatePeerReflexiveConfig is the config required to create a new CandidatePeerReflexive

type CandidateRelatedAddress 

type CandidateRelatedAddress struct {
	Address string
	Port    int
}

CandidateRelatedAddress convey transport addresses related to the candidate, useful for diagnostics and other purposes.

func (*CandidateRelatedAddress) Equal 

func (c *CandidateRelatedAddress) Equal(other *CandidateRelatedAddress) bool

Equal allows comparing two CandidateRelatedAddresses. The CandidateRelatedAddress are allowed to be nil.

func (*CandidateRelatedAddress) String 

func (c *CandidateRelatedAddress) String() string

String makes CandidateRelatedAddress printable

type CandidateRelay added in v0.3.0 

type CandidateRelay struct {
	// contains filtered or unexported fields
}

CandidateRelay ...

func NewCandidateRelay 

func NewCandidateRelay(config *CandidateRelayConfig) (*CandidateRelay, error)

NewCandidateRelay creates a new relay candidate

func (*CandidateRelay) Address added in v0.4.0 

func (c *CandidateRelay) Address() string

Address returns Candidate Address

func (*CandidateRelay) Component added in v0.3.0 

func (c *CandidateRelay) Component() uint16

Component returns candidate component

func (*CandidateRelay) Equal added in v0.3.0 

func (c *CandidateRelay) Equal(other Candidate) bool

Equal is used to compare two candidateBases

func (*CandidateRelay) ID added in v0.4.1 

func (c *CandidateRelay) ID() string

ID returns Candidate ID

func (*CandidateRelay) LastReceived added in v0.3.0 

func (c *CandidateRelay) LastReceived() time.Time

LastReceived returns a time.Time indicating the last time this candidate was received

func (*CandidateRelay) LastSent added in v0.3.0 

func (c *CandidateRelay) LastSent() time.Time

LastSent returns a time.Time indicating the last time this candidate was sent

func (*CandidateRelay) LocalPreference added in v0.3.0 

func (c *CandidateRelay) LocalPreference() uint16

LocalPreference returns the local preference for this candidate

func (*CandidateRelay) NetworkType added in v0.3.0 

func (c *CandidateRelay) NetworkType() NetworkType

NetworkType returns candidate NetworkType

func (*CandidateRelay) Port added in v0.3.0 

func (c *CandidateRelay) Port() int

Port returns Candidate Port

func (*CandidateRelay) Priority added in v0.3.0 

func (c *CandidateRelay) Priority() uint32

Priority computes the priority for this ICE Candidate

func (*CandidateRelay) RelatedAddress added in v0.3.0 

func (c *CandidateRelay) RelatedAddress() *CandidateRelatedAddress

RelatedAddress returns *CandidateRelatedAddress

func (*CandidateRelay) String added in v0.3.0 

func (c *CandidateRelay) String() string

String makes the candidateBase printable

func (*CandidateRelay) Type added in v0.3.0 

func (c *CandidateRelay) Type() CandidateType

Type returns candidate type

type CandidateRelayConfig added in v0.4.2 

type CandidateRelayConfig struct {
	CandidateID string
	Network     string
	Address     string
	Port        int
	Component   uint16
	RelAddr     string
	RelPort     int
	OnClose     func() error
}

CandidateRelayConfig is the config required to create a new CandidateRelay

type CandidateServerReflexive added in v0.3.0 

type CandidateServerReflexive struct {
	// contains filtered or unexported fields
}

CandidateServerReflexive ...

func NewCandidateServerReflexive 

func NewCandidateServerReflexive(config *CandidateServerReflexiveConfig) (*CandidateServerReflexive, error)

NewCandidateServerReflexive creates a new server reflective candidate

func (*CandidateServerReflexive) Address added in v0.4.0 

func (c *CandidateServerReflexive) Address() string

Address returns Candidate Address

func (*CandidateServerReflexive) Component added in v0.3.0 

func (c *CandidateServerReflexive) Component() uint16

Component returns candidate component

func (*CandidateServerReflexive) Equal added in v0.3.0 

func (c *CandidateServerReflexive) Equal(other Candidate) bool

Equal is used to compare two candidateBases

func (*CandidateServerReflexive) ID added in v0.4.1 

func (c *CandidateServerReflexive) ID() string

ID returns Candidate ID

func (*CandidateServerReflexive) LastReceived added in v0.3.0 

func (c *CandidateServerReflexive) LastReceived() time.Time

LastReceived returns a time.Time indicating the last time this candidate was received

func (*CandidateServerReflexive) LastSent added in v0.3.0 

func (c *CandidateServerReflexive) LastSent() time.Time

LastSent returns a time.Time indicating the last time this candidate was sent

func (*CandidateServerReflexive) LocalPreference added in v0.3.0 

func (c *CandidateServerReflexive) LocalPreference() uint16

LocalPreference returns the local preference for this candidate

func (*CandidateServerReflexive) NetworkType added in v0.3.0 

func (c *CandidateServerReflexive) NetworkType() NetworkType

NetworkType returns candidate NetworkType

func (*CandidateServerReflexive) Port added in v0.3.0 

func (c *CandidateServerReflexive) Port() int

Port returns Candidate Port

func (*CandidateServerReflexive) Priority added in v0.3.0 

func (c *CandidateServerReflexive) Priority() uint32

Priority computes the priority for this ICE Candidate

func (*CandidateServerReflexive) RelatedAddress added in v0.3.0 

func (c *CandidateServerReflexive) RelatedAddress() *CandidateRelatedAddress

RelatedAddress returns *CandidateRelatedAddress

func (*CandidateServerReflexive) String added in v0.3.0 

func (c *CandidateServerReflexive) String() string

String makes the candidateBase printable

func (*CandidateServerReflexive) Type added in v0.3.0 

func (c *CandidateServerReflexive) Type() CandidateType

Type returns candidate type

type CandidateServerReflexiveConfig added in v0.4.2 

type CandidateServerReflexiveConfig struct {
	CandidateID string
	Network     string
	Address     string
	Port        int
	Component   uint16
	RelAddr     string
	RelPort     int
}

CandidateServerReflexiveConfig is the config required to create a new CandidateServerReflexive

type CandidateStats added in v0.4.1 

type CandidateStats struct {
	// Timestamp is the timestamp associated with this object.
	Timestamp time.Time

	// ID is the candidate ID
	ID string

	// NetworkType represents the type of network interface used by the base of a
	// local candidate (the address the ICE agent sends from). Only present for
	// local candidates; it's not possible to know what type of network interface
	// a remote candidate is using.
	//
	// Note:
	// This stat only tells you about the network interface used by the first "hop";
	// it's possible that a connection will be bottlenecked by another type of network.
	// For example, when using Wi-Fi tethering, the networkType of the relevant candidate
	// would be "wifi", even when the next hop is over a cellular connection.
	NetworkType NetworkType

	// IP is the IP address of the candidate, allowing for IPv4 addresses and
	// IPv6 addresses, but fully qualified domain names (FQDNs) are not allowed.
	IP string

	// Port is the port number of the candidate.
	Port int

	// CandidateType is the "Type" field of the ICECandidate.
	CandidateType CandidateType

	// Priority is the "Priority" field of the ICECandidate.
	Priority uint32

	// URL is the URL of the TURN or STUN server indicated in the that translated
	// this IP address. It is the URL address surfaced in an PeerConnectionICEEvent.
	URL string

	// RelayProtocol is the protocol used by the endpoint to communicate with the
	// TURN server. This is only present for local candidates. Valid values for
	// the TURN URL protocol is one of udp, tcp, or tls.
	RelayProtocol string

	// Deleted is true if the candidate has been deleted/freed. For host candidates,
	// this means that any network resources (typically a socket) associated with the
	// candidate have been released. For TURN candidates, this means the TURN allocation
	// is no longer active.
	//
	// Only defined for local candidates. For remote candidates, this property is not applicable.
	Deleted bool
}

CandidateStats contains ICE candidate statistics related to the ICETransport objects.

type CandidateType 

type CandidateType byte

CandidateType represents the type of candidate 

const (
	CandidateTypeUnspecified CandidateType = iota
	CandidateTypeHost
	CandidateTypeServerReflexive
	CandidateTypePeerReflexive
	CandidateTypeRelay
)

CandidateType enum

func (CandidateType) Preference 

func (c CandidateType) Preference() uint16

Preference returns the preference weight of a CandidateType

4.1.2.2. Guidelines for Choosing Type and Local Preferences The RECOMMENDED values are 126 for host candidates, 100 for server reflexive candidates, 110 for peer reflexive candidates, and 0 for relayed candidates.

func (CandidateType) String 

func (c CandidateType) String() string

String makes CandidateType printable

type Conn 

type Conn struct {
	// contains filtered or unexported fields
}

Conn represents the ICE connection. At the moment the lifetime of the Conn is equal to the Agent.

func (*Conn) BytesReceived added in v0.5.11 

func (c *Conn) BytesReceived() uint64

BytesReceived returns the number of bytes received

func (*Conn) BytesSent added in v0.5.11 

func (c *Conn) BytesSent() uint64

BytesSent returns the number of bytes sent

func (*Conn) Close 

func (c *Conn) Close() error

Close implements the Conn Close method. It is used to close the connection. Any calls to Read and Write will be unblocked and return an error.

func (*Conn) LocalAddr 

func (c *Conn) LocalAddr() net.Addr

LocalAddr is a stub

func (*Conn) Read 

func (c *Conn) Read(p []byte) (int, error)

Read implements the Conn Read method.

func (*Conn) RemoteAddr 

func (c *Conn) RemoteAddr() net.Addr

RemoteAddr is a stub

func (*Conn) SetDeadline 

func (c *Conn) SetDeadline(t time.Time) error

SetDeadline is a stub

func (*Conn) SetReadDeadline 

func (c *Conn) SetReadDeadline(t time.Time) error

SetReadDeadline is a stub

func (*Conn) SetWriteDeadline 

func (c *Conn) SetWriteDeadline(t time.Time) error

SetWriteDeadline is a stub

func (*Conn) Write 

func (c *Conn) Write(p []byte) (int, error)

Write implements the Conn Write method.

type ConnectionState 

type ConnectionState int

ConnectionState is an enum showing the state of a ICE Connection

func (ConnectionState) String 

func (c ConnectionState) String() string

type GatheringState 

type GatheringState int

GatheringState describes the state of the candidate gathering process 

const (
	// GatheringStateNew indicates candidate gatering is not yet started
	GatheringStateNew GatheringState = iota + 1

	// GatheringStateGathering indicates candidate gatering is ongoing
	GatheringStateGathering

	// GatheringStateComplete indicates candidate gatering has been completed
	GatheringStateComplete
)

func (GatheringState) String 

func (t GatheringState) String() string

type MulticastDNSMode added in v0.4.0 

type MulticastDNSMode byte

MulticastDNSMode represents the different Multicast modes ICE can run in 

const (
	// MulticastDNSModeDisabled means remote mDNS candidates will be discarded, and local host candidates will use IPs
	MulticastDNSModeDisabled MulticastDNSMode = iota + 1

	// MulticastDNSModeQueryOnly means remote mDNS candidates will be accepted, and local host candidates will use IPs
	MulticastDNSModeQueryOnly

	// MulticastDNSModeQueryAndGather means remote mDNS candidates will be accepted, and local host candidates will use mDNS
	MulticastDNSModeQueryAndGather
)

MulticastDNSMode enum

type NetworkType 

type NetworkType int

NetworkType represents the type of network 

const (
	// NetworkTypeUDP4 indicates UDP over IPv4.
	NetworkTypeUDP4 NetworkType = iota + 1

	// NetworkTypeUDP6 indicates UDP over IPv6.
	NetworkTypeUDP6

	// NetworkTypeTCP4 indicates TCP over IPv4.
	NetworkTypeTCP4

	// NetworkTypeTCP6 indicates TCP over IPv6.
	NetworkTypeTCP6
)

func (NetworkType) IsIPv4 

func (t NetworkType) IsIPv4() bool

IsIPv4 returns whether the network type is IPv4 or not.

func (NetworkType) IsIPv6 

func (t NetworkType) IsIPv6() bool

IsIPv6 returns whether the network type is IPv6 or not.

func (NetworkType) IsReliable 

func (t NetworkType) IsReliable() bool

IsReliable returns true if the network is reliable

func (NetworkType) NetworkShort 

func (t NetworkType) NetworkShort() string

NetworkShort returns the short network description

func (NetworkType) String 

func (t NetworkType) String() string

type PriorityAttr added in v0.2.9 

type PriorityAttr uint32

PriorityAttr represents PRIORITY attribute.

func (PriorityAttr) AddTo added in v0.2.9 

func (p PriorityAttr) AddTo(m *stun.Message) error

AddTo adds PRIORITY attribute to message.

func (*PriorityAttr) GetFrom added in v0.2.9 

func (p *PriorityAttr) GetFrom(m *stun.Message) error

GetFrom decodes PRIORITY attribute from message.

type ProtoType 

type ProtoType int

ProtoType indicates the transport protocol type that is used in the ice.URL structure. 

const (
	// ProtoTypeUDP indicates the URL uses a UDP transport.
	ProtoTypeUDP ProtoType = iota + 1

	// ProtoTypeTCP indicates the URL uses a TCP transport.
	ProtoTypeTCP
)

func NewProtoType 

func NewProtoType(raw string) ProtoType

NewProtoType defines a procedure for creating a new ProtoType from a raw string naming the transport protocol type.

func (ProtoType) String 

func (t ProtoType) String() string

type Role added in v0.2.9 

type Role byte

Role represents ICE agent role, which can be controlling or controlled. 

const (
	Controlling Role = iota
	Controlled
)

Possible ICE agent roles.

func (Role) MarshalText added in v0.2.9 

func (r Role) MarshalText() (text []byte, err error)

MarshalText implements TextMarshaler.

func (Role) String added in v0.2.9 

func (r Role) String() string

func (*Role) UnmarshalText added in v0.2.9 

func (r *Role) UnmarshalText(text []byte) error

UnmarshalText implements TextUnmarshaler.

type SchemeType 

type SchemeType int

SchemeType indicates the type of server used in the ice.URL structure. 

const (
	// SchemeTypeSTUN indicates the URL represents a STUN server.
	SchemeTypeSTUN SchemeType = iota + 1

	// SchemeTypeSTUNS indicates the URL represents a STUNS (secure) server.
	SchemeTypeSTUNS

	// SchemeTypeTURN indicates the URL represents a TURN server.
	SchemeTypeTURN

	// SchemeTypeTURNS indicates the URL represents a TURNS (secure) server.
	SchemeTypeTURNS
)

func NewSchemeType 

func NewSchemeType(raw string) SchemeType

NewSchemeType defines a procedure for creating a new SchemeType from a raw string naming the scheme type.

func (SchemeType) String 

func (t SchemeType) String() string

type URL 

type URL struct {
	Scheme   SchemeType
	Host     string
	Port     int
	Username string
	Password string
	Proto    ProtoType
}

URL represents a STUN (rfc7064) or TURN (rfc7065) URL

func ParseURL 

func ParseURL(raw string) (*URL, error)

ParseURL parses a STUN or TURN urls following the ABNF syntax described in https://tools.ietf.org/html/rfc7064 and https://tools.ietf.org/html/rfc7065 respectively.

func (URL) IsSecure 

func (u URL) IsSecure() bool

IsSecure returns whether the this URL's scheme describes secure scheme or not.

func (URL) String 

func (u URL) String() string

type UseCandidateAttr added in v0.2.9 

type UseCandidateAttr struct{}

UseCandidateAttr represents USE-CANDIDATE attribute. 

var UseCandidate UseCandidateAttr

UseCandidate is shorthand for UseCandidateAttr.

func (UseCandidateAttr) AddTo added in v0.2.9 

func (UseCandidateAttr) AddTo(m *stun.Message) error

AddTo adds USE-CANDIDATE attribute to message.

func (UseCandidateAttr) IsSet added in v0.2.9 

func (UseCandidateAttr) IsSet(m *stun.Message) bool

IsSet returns true if USE-CANDIDATE attribute is set.

Source Files

View all Source files

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL
go.dev uses cookies from Google to deliver and enhance the quality of its services and to analyze traffic. Learn more.