Documentation
¶
Overview ¶
Package support provides a client for AWS Support.
Index ¶
- Constants
- type AddAttachmentsToSetInput
- func (s AddAttachmentsToSetInput) GoString() string
- func (s *AddAttachmentsToSetInput) SetAttachmentSetId(v string) *AddAttachmentsToSetInput
- func (s *AddAttachmentsToSetInput) SetAttachments(v []*Attachment) *AddAttachmentsToSetInput
- func (s AddAttachmentsToSetInput) String() string
- func (s *AddAttachmentsToSetInput) Validate() error
- type AddAttachmentsToSetOutput
- type AddCommunicationToCaseInput
- func (s AddCommunicationToCaseInput) GoString() string
- func (s *AddCommunicationToCaseInput) SetAttachmentSetId(v string) *AddCommunicationToCaseInput
- func (s *AddCommunicationToCaseInput) SetCaseId(v string) *AddCommunicationToCaseInput
- func (s *AddCommunicationToCaseInput) SetCcEmailAddresses(v []*string) *AddCommunicationToCaseInput
- func (s *AddCommunicationToCaseInput) SetCommunicationBody(v string) *AddCommunicationToCaseInput
- func (s AddCommunicationToCaseInput) String() string
- func (s *AddCommunicationToCaseInput) Validate() error
- type AddCommunicationToCaseOutput
- type Attachment
- type AttachmentDetails
- type CaseDetails
- func (s CaseDetails) GoString() string
- func (s *CaseDetails) SetCaseId(v string) *CaseDetails
- func (s *CaseDetails) SetCategoryCode(v string) *CaseDetails
- func (s *CaseDetails) SetCcEmailAddresses(v []*string) *CaseDetails
- func (s *CaseDetails) SetDisplayId(v string) *CaseDetails
- func (s *CaseDetails) SetLanguage(v string) *CaseDetails
- func (s *CaseDetails) SetRecentCommunications(v *RecentCaseCommunications) *CaseDetails
- func (s *CaseDetails) SetServiceCode(v string) *CaseDetails
- func (s *CaseDetails) SetSeverityCode(v string) *CaseDetails
- func (s *CaseDetails) SetStatus(v string) *CaseDetails
- func (s *CaseDetails) SetSubject(v string) *CaseDetails
- func (s *CaseDetails) SetSubmittedBy(v string) *CaseDetails
- func (s *CaseDetails) SetTimeCreated(v string) *CaseDetails
- func (s CaseDetails) String() string
- type Category
- type Communication
- func (s Communication) GoString() string
- func (s *Communication) SetAttachmentSet(v []*AttachmentDetails) *Communication
- func (s *Communication) SetBody(v string) *Communication
- func (s *Communication) SetCaseId(v string) *Communication
- func (s *Communication) SetSubmittedBy(v string) *Communication
- func (s *Communication) SetTimeCreated(v string) *Communication
- func (s Communication) String() string
- type CreateCaseInput
- func (s CreateCaseInput) GoString() string
- func (s *CreateCaseInput) SetAttachmentSetId(v string) *CreateCaseInput
- func (s *CreateCaseInput) SetCategoryCode(v string) *CreateCaseInput
- func (s *CreateCaseInput) SetCcEmailAddresses(v []*string) *CreateCaseInput
- func (s *CreateCaseInput) SetCommunicationBody(v string) *CreateCaseInput
- func (s *CreateCaseInput) SetIssueType(v string) *CreateCaseInput
- func (s *CreateCaseInput) SetLanguage(v string) *CreateCaseInput
- func (s *CreateCaseInput) SetServiceCode(v string) *CreateCaseInput
- func (s *CreateCaseInput) SetSeverityCode(v string) *CreateCaseInput
- func (s *CreateCaseInput) SetSubject(v string) *CreateCaseInput
- func (s CreateCaseInput) String() string
- func (s *CreateCaseInput) Validate() error
- type CreateCaseOutput
- type DescribeAttachmentInput
- type DescribeAttachmentOutput
- type DescribeCasesInput
- func (s DescribeCasesInput) GoString() string
- func (s *DescribeCasesInput) SetAfterTime(v string) *DescribeCasesInput
- func (s *DescribeCasesInput) SetBeforeTime(v string) *DescribeCasesInput
- func (s *DescribeCasesInput) SetCaseIdList(v []*string) *DescribeCasesInput
- func (s *DescribeCasesInput) SetDisplayId(v string) *DescribeCasesInput
- func (s *DescribeCasesInput) SetIncludeCommunications(v bool) *DescribeCasesInput
- func (s *DescribeCasesInput) SetIncludeResolvedCases(v bool) *DescribeCasesInput
- func (s *DescribeCasesInput) SetLanguage(v string) *DescribeCasesInput
- func (s *DescribeCasesInput) SetMaxResults(v int64) *DescribeCasesInput
- func (s *DescribeCasesInput) SetNextToken(v string) *DescribeCasesInput
- func (s DescribeCasesInput) String() string
- func (s *DescribeCasesInput) Validate() error
- type DescribeCasesOutput
- type DescribeCommunicationsInput
- func (s DescribeCommunicationsInput) GoString() string
- func (s *DescribeCommunicationsInput) SetAfterTime(v string) *DescribeCommunicationsInput
- func (s *DescribeCommunicationsInput) SetBeforeTime(v string) *DescribeCommunicationsInput
- func (s *DescribeCommunicationsInput) SetCaseId(v string) *DescribeCommunicationsInput
- func (s *DescribeCommunicationsInput) SetMaxResults(v int64) *DescribeCommunicationsInput
- func (s *DescribeCommunicationsInput) SetNextToken(v string) *DescribeCommunicationsInput
- func (s DescribeCommunicationsInput) String() string
- func (s *DescribeCommunicationsInput) Validate() error
- type DescribeCommunicationsOutput
- func (s DescribeCommunicationsOutput) GoString() string
- func (s *DescribeCommunicationsOutput) SetCommunications(v []*Communication) *DescribeCommunicationsOutput
- func (s *DescribeCommunicationsOutput) SetNextToken(v string) *DescribeCommunicationsOutput
- func (s DescribeCommunicationsOutput) String() string
- type DescribeServicesInput
- type DescribeServicesOutput
- type DescribeSeverityLevelsInput
- type DescribeSeverityLevelsOutput
- type DescribeTrustedAdvisorCheckRefreshStatusesInput
- func (s DescribeTrustedAdvisorCheckRefreshStatusesInput) GoString() string
- func (s *DescribeTrustedAdvisorCheckRefreshStatusesInput) SetCheckIds(v []*string) *DescribeTrustedAdvisorCheckRefreshStatusesInput
- func (s DescribeTrustedAdvisorCheckRefreshStatusesInput) String() string
- func (s *DescribeTrustedAdvisorCheckRefreshStatusesInput) Validate() error
- type DescribeTrustedAdvisorCheckRefreshStatusesOutput
- func (s DescribeTrustedAdvisorCheckRefreshStatusesOutput) GoString() string
- func (s *DescribeTrustedAdvisorCheckRefreshStatusesOutput) SetStatuses(v []*TrustedAdvisorCheckRefreshStatus) *DescribeTrustedAdvisorCheckRefreshStatusesOutput
- func (s DescribeTrustedAdvisorCheckRefreshStatusesOutput) String() string
- type DescribeTrustedAdvisorCheckResultInput
- func (s DescribeTrustedAdvisorCheckResultInput) GoString() string
- func (s *DescribeTrustedAdvisorCheckResultInput) SetCheckId(v string) *DescribeTrustedAdvisorCheckResultInput
- func (s *DescribeTrustedAdvisorCheckResultInput) SetLanguage(v string) *DescribeTrustedAdvisorCheckResultInput
- func (s DescribeTrustedAdvisorCheckResultInput) String() string
- func (s *DescribeTrustedAdvisorCheckResultInput) Validate() error
- type DescribeTrustedAdvisorCheckResultOutput
- type DescribeTrustedAdvisorCheckSummariesInput
- func (s DescribeTrustedAdvisorCheckSummariesInput) GoString() string
- func (s *DescribeTrustedAdvisorCheckSummariesInput) SetCheckIds(v []*string) *DescribeTrustedAdvisorCheckSummariesInput
- func (s DescribeTrustedAdvisorCheckSummariesInput) String() string
- func (s *DescribeTrustedAdvisorCheckSummariesInput) Validate() error
- type DescribeTrustedAdvisorCheckSummariesOutput
- type DescribeTrustedAdvisorChecksInput
- type DescribeTrustedAdvisorChecksOutput
- type RecentCaseCommunications
- type RefreshTrustedAdvisorCheckInput
- type RefreshTrustedAdvisorCheckOutput
- type ResolveCaseInput
- type ResolveCaseOutput
- type Service
- type SeverityLevel
- type Support
- func (c *Support) AddAttachmentsToSet(input *AddAttachmentsToSetInput) (*AddAttachmentsToSetOutput, error)
- func (c *Support) AddAttachmentsToSetRequest(input *AddAttachmentsToSetInput) (req *request.Request, output *AddAttachmentsToSetOutput)
- func (c *Support) AddCommunicationToCase(input *AddCommunicationToCaseInput) (*AddCommunicationToCaseOutput, error)
- func (c *Support) AddCommunicationToCaseRequest(input *AddCommunicationToCaseInput) (req *request.Request, output *AddCommunicationToCaseOutput)
- func (c *Support) CreateCase(input *CreateCaseInput) (*CreateCaseOutput, error)
- func (c *Support) CreateCaseRequest(input *CreateCaseInput) (req *request.Request, output *CreateCaseOutput)
- func (c *Support) DescribeAttachment(input *DescribeAttachmentInput) (*DescribeAttachmentOutput, error)
- func (c *Support) DescribeAttachmentRequest(input *DescribeAttachmentInput) (req *request.Request, output *DescribeAttachmentOutput)
- func (c *Support) DescribeCases(input *DescribeCasesInput) (*DescribeCasesOutput, error)
- func (c *Support) DescribeCasesPages(input *DescribeCasesInput, ...) error
- func (c *Support) DescribeCasesRequest(input *DescribeCasesInput) (req *request.Request, output *DescribeCasesOutput)
- func (c *Support) DescribeCommunications(input *DescribeCommunicationsInput) (*DescribeCommunicationsOutput, error)
- func (c *Support) DescribeCommunicationsPages(input *DescribeCommunicationsInput, ...) error
- func (c *Support) DescribeCommunicationsRequest(input *DescribeCommunicationsInput) (req *request.Request, output *DescribeCommunicationsOutput)
- func (c *Support) DescribeServices(input *DescribeServicesInput) (*DescribeServicesOutput, error)
- func (c *Support) DescribeServicesRequest(input *DescribeServicesInput) (req *request.Request, output *DescribeServicesOutput)
- func (c *Support) DescribeSeverityLevels(input *DescribeSeverityLevelsInput) (*DescribeSeverityLevelsOutput, error)
- func (c *Support) DescribeSeverityLevelsRequest(input *DescribeSeverityLevelsInput) (req *request.Request, output *DescribeSeverityLevelsOutput)
- func (c *Support) DescribeTrustedAdvisorCheckRefreshStatuses(input *DescribeTrustedAdvisorCheckRefreshStatusesInput) (*DescribeTrustedAdvisorCheckRefreshStatusesOutput, error)
- func (c *Support) DescribeTrustedAdvisorCheckRefreshStatusesRequest(input *DescribeTrustedAdvisorCheckRefreshStatusesInput) (req *request.Request, output *DescribeTrustedAdvisorCheckRefreshStatusesOutput)
- func (c *Support) DescribeTrustedAdvisorCheckResult(input *DescribeTrustedAdvisorCheckResultInput) (*DescribeTrustedAdvisorCheckResultOutput, error)
- func (c *Support) DescribeTrustedAdvisorCheckResultRequest(input *DescribeTrustedAdvisorCheckResultInput) (req *request.Request, output *DescribeTrustedAdvisorCheckResultOutput)
- func (c *Support) DescribeTrustedAdvisorCheckSummaries(input *DescribeTrustedAdvisorCheckSummariesInput) (*DescribeTrustedAdvisorCheckSummariesOutput, error)
- func (c *Support) DescribeTrustedAdvisorCheckSummariesRequest(input *DescribeTrustedAdvisorCheckSummariesInput) (req *request.Request, output *DescribeTrustedAdvisorCheckSummariesOutput)
- func (c *Support) DescribeTrustedAdvisorChecks(input *DescribeTrustedAdvisorChecksInput) (*DescribeTrustedAdvisorChecksOutput, error)
- func (c *Support) DescribeTrustedAdvisorChecksRequest(input *DescribeTrustedAdvisorChecksInput) (req *request.Request, output *DescribeTrustedAdvisorChecksOutput)
- func (c *Support) RefreshTrustedAdvisorCheck(input *RefreshTrustedAdvisorCheckInput) (*RefreshTrustedAdvisorCheckOutput, error)
- func (c *Support) RefreshTrustedAdvisorCheckRequest(input *RefreshTrustedAdvisorCheckInput) (req *request.Request, output *RefreshTrustedAdvisorCheckOutput)
- func (c *Support) ResolveCase(input *ResolveCaseInput) (*ResolveCaseOutput, error)
- func (c *Support) ResolveCaseRequest(input *ResolveCaseInput) (req *request.Request, output *ResolveCaseOutput)
- type TrustedAdvisorCategorySpecificSummary
- type TrustedAdvisorCheckDescription
- func (s TrustedAdvisorCheckDescription) GoString() string
- func (s *TrustedAdvisorCheckDescription) SetCategory(v string) *TrustedAdvisorCheckDescription
- func (s *TrustedAdvisorCheckDescription) SetDescription(v string) *TrustedAdvisorCheckDescription
- func (s *TrustedAdvisorCheckDescription) SetId(v string) *TrustedAdvisorCheckDescription
- func (s *TrustedAdvisorCheckDescription) SetMetadata(v []*string) *TrustedAdvisorCheckDescription
- func (s *TrustedAdvisorCheckDescription) SetName(v string) *TrustedAdvisorCheckDescription
- func (s TrustedAdvisorCheckDescription) String() string
- type TrustedAdvisorCheckRefreshStatus
- func (s TrustedAdvisorCheckRefreshStatus) GoString() string
- func (s *TrustedAdvisorCheckRefreshStatus) SetCheckId(v string) *TrustedAdvisorCheckRefreshStatus
- func (s *TrustedAdvisorCheckRefreshStatus) SetMillisUntilNextRefreshable(v int64) *TrustedAdvisorCheckRefreshStatus
- func (s *TrustedAdvisorCheckRefreshStatus) SetStatus(v string) *TrustedAdvisorCheckRefreshStatus
- func (s TrustedAdvisorCheckRefreshStatus) String() string
- type TrustedAdvisorCheckResult
- func (s TrustedAdvisorCheckResult) GoString() string
- func (s *TrustedAdvisorCheckResult) SetCategorySpecificSummary(v *TrustedAdvisorCategorySpecificSummary) *TrustedAdvisorCheckResult
- func (s *TrustedAdvisorCheckResult) SetCheckId(v string) *TrustedAdvisorCheckResult
- func (s *TrustedAdvisorCheckResult) SetFlaggedResources(v []*TrustedAdvisorResourceDetail) *TrustedAdvisorCheckResult
- func (s *TrustedAdvisorCheckResult) SetResourcesSummary(v *TrustedAdvisorResourcesSummary) *TrustedAdvisorCheckResult
- func (s *TrustedAdvisorCheckResult) SetStatus(v string) *TrustedAdvisorCheckResult
- func (s *TrustedAdvisorCheckResult) SetTimestamp(v string) *TrustedAdvisorCheckResult
- func (s TrustedAdvisorCheckResult) String() string
- type TrustedAdvisorCheckSummary
- func (s TrustedAdvisorCheckSummary) GoString() string
- func (s *TrustedAdvisorCheckSummary) SetCategorySpecificSummary(v *TrustedAdvisorCategorySpecificSummary) *TrustedAdvisorCheckSummary
- func (s *TrustedAdvisorCheckSummary) SetCheckId(v string) *TrustedAdvisorCheckSummary
- func (s *TrustedAdvisorCheckSummary) SetHasFlaggedResources(v bool) *TrustedAdvisorCheckSummary
- func (s *TrustedAdvisorCheckSummary) SetResourcesSummary(v *TrustedAdvisorResourcesSummary) *TrustedAdvisorCheckSummary
- func (s *TrustedAdvisorCheckSummary) SetStatus(v string) *TrustedAdvisorCheckSummary
- func (s *TrustedAdvisorCheckSummary) SetTimestamp(v string) *TrustedAdvisorCheckSummary
- func (s TrustedAdvisorCheckSummary) String() string
- type TrustedAdvisorCostOptimizingSummary
- func (s TrustedAdvisorCostOptimizingSummary) GoString() string
- func (s *TrustedAdvisorCostOptimizingSummary) SetEstimatedMonthlySavings(v float64) *TrustedAdvisorCostOptimizingSummary
- func (s *TrustedAdvisorCostOptimizingSummary) SetEstimatedPercentMonthlySavings(v float64) *TrustedAdvisorCostOptimizingSummary
- func (s TrustedAdvisorCostOptimizingSummary) String() string
- type TrustedAdvisorResourceDetail
- func (s TrustedAdvisorResourceDetail) GoString() string
- func (s *TrustedAdvisorResourceDetail) SetIsSuppressed(v bool) *TrustedAdvisorResourceDetail
- func (s *TrustedAdvisorResourceDetail) SetMetadata(v []*string) *TrustedAdvisorResourceDetail
- func (s *TrustedAdvisorResourceDetail) SetRegion(v string) *TrustedAdvisorResourceDetail
- func (s *TrustedAdvisorResourceDetail) SetResourceId(v string) *TrustedAdvisorResourceDetail
- func (s *TrustedAdvisorResourceDetail) SetStatus(v string) *TrustedAdvisorResourceDetail
- func (s TrustedAdvisorResourceDetail) String() string
- type TrustedAdvisorResourcesSummary
- func (s TrustedAdvisorResourcesSummary) GoString() string
- func (s *TrustedAdvisorResourcesSummary) SetResourcesFlagged(v int64) *TrustedAdvisorResourcesSummary
- func (s *TrustedAdvisorResourcesSummary) SetResourcesIgnored(v int64) *TrustedAdvisorResourcesSummary
- func (s *TrustedAdvisorResourcesSummary) SetResourcesProcessed(v int64) *TrustedAdvisorResourcesSummary
- func (s *TrustedAdvisorResourcesSummary) SetResourcesSuppressed(v int64) *TrustedAdvisorResourcesSummary
- func (s TrustedAdvisorResourcesSummary) String() string
Examples ¶
- Support.AddAttachmentsToSet
- Support.AddCommunicationToCase
- Support.CreateCase
- Support.DescribeAttachment
- Support.DescribeCases
- Support.DescribeCommunications
- Support.DescribeServices
- Support.DescribeSeverityLevels
- Support.DescribeTrustedAdvisorCheckRefreshStatuses
- Support.DescribeTrustedAdvisorCheckResult
- Support.DescribeTrustedAdvisorCheckSummaries
- Support.DescribeTrustedAdvisorChecks
- Support.RefreshTrustedAdvisorCheck
- Support.ResolveCase
Constants ¶
const ( ServiceName = "support" // Service endpoint prefix API calls made to. EndpointsID = ServiceName // Service ID for Regions and Endpoints metadata. )
Service information constants
Variables ¶
This section is empty.
Functions ¶
This section is empty.
Types ¶
type AddAttachmentsToSetInput ¶
type AddAttachmentsToSetInput struct { // The ID of the attachment set. If an attachmentSetId is not specified, a new // attachment set is created, and the ID of the set is returned in the response. // If an attachmentSetId is specified, the attachments are added to the specified // set, if it exists. AttachmentSetId *string `locationName:"attachmentSetId" type:"string"` // One or more attachments to add to the set. The limit is 3 attachments per // set, and the size limit is 5 MB per attachment. // // Attachments is a required field Attachments []*Attachment `locationName:"attachments" type:"list" required:"true"` // contains filtered or unexported fields }
Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/AddAttachmentsToSetRequest
func (AddAttachmentsToSetInput) GoString ¶
func (s AddAttachmentsToSetInput) GoString() string
GoString returns the string representation
func (*AddAttachmentsToSetInput) SetAttachmentSetId ¶
func (s *AddAttachmentsToSetInput) SetAttachmentSetId(v string) *AddAttachmentsToSetInput
SetAttachmentSetId sets the AttachmentSetId field's value.
func (*AddAttachmentsToSetInput) SetAttachments ¶
func (s *AddAttachmentsToSetInput) SetAttachments(v []*Attachment) *AddAttachmentsToSetInput
SetAttachments sets the Attachments field's value.
func (AddAttachmentsToSetInput) String ¶
func (s AddAttachmentsToSetInput) String() string
String returns the string representation
func (*AddAttachmentsToSetInput) Validate ¶
func (s *AddAttachmentsToSetInput) Validate() error
Validate inspects the fields of the type to determine if they are valid.
type AddAttachmentsToSetOutput ¶
type AddAttachmentsToSetOutput struct { // The ID of the attachment set. If an attachmentSetId was not specified, a // new attachment set is created, and the ID of the set is returned in the response. // If an attachmentSetId was specified, the attachments are added to the specified // set, if it exists. AttachmentSetId *string `locationName:"attachmentSetId" type:"string"` // The time and date when the attachment set expires. ExpiryTime *string `locationName:"expiryTime" type:"string"` // contains filtered or unexported fields }
The ID and expiry time of the attachment set returned by the AddAttachmentsToSet operation. Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/AddAttachmentsToSetResponse
func (AddAttachmentsToSetOutput) GoString ¶
func (s AddAttachmentsToSetOutput) GoString() string
GoString returns the string representation
func (*AddAttachmentsToSetOutput) SetAttachmentSetId ¶
func (s *AddAttachmentsToSetOutput) SetAttachmentSetId(v string) *AddAttachmentsToSetOutput
SetAttachmentSetId sets the AttachmentSetId field's value.
func (*AddAttachmentsToSetOutput) SetExpiryTime ¶
func (s *AddAttachmentsToSetOutput) SetExpiryTime(v string) *AddAttachmentsToSetOutput
SetExpiryTime sets the ExpiryTime field's value.
func (AddAttachmentsToSetOutput) String ¶
func (s AddAttachmentsToSetOutput) String() string
String returns the string representation
type AddCommunicationToCaseInput ¶
type AddCommunicationToCaseInput struct { // The ID of a set of one or more attachments for the communication to add to // the case. Create the set by calling AddAttachmentsToSet AttachmentSetId *string `locationName:"attachmentSetId" type:"string"` // The AWS Support case ID requested or returned in the call. The case ID is // an alphanumeric string formatted as shown in this example: case-12345678910-2013-c4c1d2bf33c5cf47 CaseId *string `locationName:"caseId" type:"string"` // The email addresses in the CC line of an email to be added to the support // case. CcEmailAddresses []*string `locationName:"ccEmailAddresses" type:"list"` // The body of an email communication to add to the support case. // // CommunicationBody is a required field CommunicationBody *string `locationName:"communicationBody" min:"1" type:"string" required:"true"` // contains filtered or unexported fields }
To be written. Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/AddCommunicationToCaseRequest
func (AddCommunicationToCaseInput) GoString ¶
func (s AddCommunicationToCaseInput) GoString() string
GoString returns the string representation
func (*AddCommunicationToCaseInput) SetAttachmentSetId ¶
func (s *AddCommunicationToCaseInput) SetAttachmentSetId(v string) *AddCommunicationToCaseInput
SetAttachmentSetId sets the AttachmentSetId field's value.
func (*AddCommunicationToCaseInput) SetCaseId ¶
func (s *AddCommunicationToCaseInput) SetCaseId(v string) *AddCommunicationToCaseInput
SetCaseId sets the CaseId field's value.
func (*AddCommunicationToCaseInput) SetCcEmailAddresses ¶
func (s *AddCommunicationToCaseInput) SetCcEmailAddresses(v []*string) *AddCommunicationToCaseInput
SetCcEmailAddresses sets the CcEmailAddresses field's value.
func (*AddCommunicationToCaseInput) SetCommunicationBody ¶
func (s *AddCommunicationToCaseInput) SetCommunicationBody(v string) *AddCommunicationToCaseInput
SetCommunicationBody sets the CommunicationBody field's value.
func (AddCommunicationToCaseInput) String ¶
func (s AddCommunicationToCaseInput) String() string
String returns the string representation
func (*AddCommunicationToCaseInput) Validate ¶
func (s *AddCommunicationToCaseInput) Validate() error
Validate inspects the fields of the type to determine if they are valid.
type AddCommunicationToCaseOutput ¶
type AddCommunicationToCaseOutput struct { // True if AddCommunicationToCase succeeds. Otherwise, returns an error. Result *bool `locationName:"result" type:"boolean"` // contains filtered or unexported fields }
The result of the AddCommunicationToCase operation. Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/AddCommunicationToCaseResponse
func (AddCommunicationToCaseOutput) GoString ¶
func (s AddCommunicationToCaseOutput) GoString() string
GoString returns the string representation
func (*AddCommunicationToCaseOutput) SetResult ¶
func (s *AddCommunicationToCaseOutput) SetResult(v bool) *AddCommunicationToCaseOutput
SetResult sets the Result field's value.
func (AddCommunicationToCaseOutput) String ¶
func (s AddCommunicationToCaseOutput) String() string
String returns the string representation
type Attachment ¶
type Attachment struct { // The content of the attachment file. // // Data is automatically base64 encoded/decoded by the SDK. Data []byte `locationName:"data" type:"blob"` // The name of the attachment file. FileName *string `locationName:"fileName" type:"string"` // contains filtered or unexported fields }
An attachment to a case communication. The attachment consists of the file name and the content of the file. Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/Attachment
func (Attachment) GoString ¶
func (s Attachment) GoString() string
GoString returns the string representation
func (*Attachment) SetData ¶
func (s *Attachment) SetData(v []byte) *Attachment
SetData sets the Data field's value.
func (*Attachment) SetFileName ¶
func (s *Attachment) SetFileName(v string) *Attachment
SetFileName sets the FileName field's value.
func (Attachment) String ¶
func (s Attachment) String() string
String returns the string representation
type AttachmentDetails ¶
type AttachmentDetails struct { // The ID of the attachment. AttachmentId *string `locationName:"attachmentId" type:"string"` // The file name of the attachment. FileName *string `locationName:"fileName" type:"string"` // contains filtered or unexported fields }
The file name and ID of an attachment to a case communication. You can use the ID to retrieve the attachment with the DescribeAttachment operation. Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/AttachmentDetails
func (AttachmentDetails) GoString ¶
func (s AttachmentDetails) GoString() string
GoString returns the string representation
func (*AttachmentDetails) SetAttachmentId ¶
func (s *AttachmentDetails) SetAttachmentId(v string) *AttachmentDetails
SetAttachmentId sets the AttachmentId field's value.
func (*AttachmentDetails) SetFileName ¶
func (s *AttachmentDetails) SetFileName(v string) *AttachmentDetails
SetFileName sets the FileName field's value.
func (AttachmentDetails) String ¶
func (s AttachmentDetails) String() string
String returns the string representation
type CaseDetails ¶
type CaseDetails struct { // The AWS Support case ID requested or returned in the call. The case ID is // an alphanumeric string formatted as shown in this example: case-12345678910-2013-c4c1d2bf33c5cf47 CaseId *string `locationName:"caseId" type:"string"` // The category of problem for the AWS Support case. CategoryCode *string `locationName:"categoryCode" type:"string"` // The email addresses that receive copies of communication about the case. CcEmailAddresses []*string `locationName:"ccEmailAddresses" type:"list"` // The ID displayed for the case in the AWS Support Center. This is a numeric // string. DisplayId *string `locationName:"displayId" type:"string"` // The ISO 639-1 code for the language in which AWS provides support. AWS Support // currently supports English ("en") and Japanese ("ja"). Language parameters // must be passed explicitly for operations that take them. Language *string `locationName:"language" type:"string"` // The five most recent communications between you and AWS Support Center, including // the IDs of any attachments to the communications. Also includes a nextToken // that you can use to retrieve earlier communications. RecentCommunications *RecentCaseCommunications `locationName:"recentCommunications" type:"structure"` // The code for the AWS service returned by the call to DescribeServices. ServiceCode *string `locationName:"serviceCode" type:"string"` // The code for the severity level returned by the call to DescribeSeverityLevels. SeverityCode *string `locationName:"severityCode" type:"string"` // The status of the case. Status *string `locationName:"status" type:"string"` // The subject line for the case in the AWS Support Center. Subject *string `locationName:"subject" type:"string"` // The email address of the account that submitted the case. SubmittedBy *string `locationName:"submittedBy" type:"string"` // The time that the case was case created in the AWS Support Center. TimeCreated *string `locationName:"timeCreated" type:"string"` // contains filtered or unexported fields }
A JSON-formatted object that contains the metadata for a support case. It is contained the response from a DescribeCases request. CaseDetails contains the following fields:
caseId. The AWS Support case ID requested or returned in the call. The case ID is an alphanumeric string formatted as shown in this example: case-12345678910-2013-c4c1d2bf33c5cf47.
categoryCode. The category of problem for the AWS Support case. Corresponds to the CategoryCode values returned by a call to DescribeServices.
displayId. The identifier for the case on pages in the AWS Support Center.
language. The ISO 639-1 code for the language in which AWS provides support. AWS Support currently supports English ("en") and Japanese ("ja"). Language parameters must be passed explicitly for operations that take them.
recentCommunications. One or more Communication objects. Fields of these objects are attachments, body, caseId, submittedBy, and timeCreated.
nextToken. A resumption point for pagination.
serviceCode. The identifier for the AWS service that corresponds to the service code defined in the call to DescribeServices.
severityCode. The severity code assigned to the case. Contains one of the values returned by the call to DescribeSeverityLevels.
status. The status of the case in the AWS Support Center.
subject. The subject line of the case.
submittedBy. The email address of the account that submitted the case.
timeCreated. The time the case was created, in ISO-8601 format.
Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/CaseDetails
func (CaseDetails) GoString ¶
func (s CaseDetails) GoString() string
GoString returns the string representation
func (*CaseDetails) SetCaseId ¶
func (s *CaseDetails) SetCaseId(v string) *CaseDetails
SetCaseId sets the CaseId field's value.
func (*CaseDetails) SetCategoryCode ¶
func (s *CaseDetails) SetCategoryCode(v string) *CaseDetails
SetCategoryCode sets the CategoryCode field's value.
func (*CaseDetails) SetCcEmailAddresses ¶
func (s *CaseDetails) SetCcEmailAddresses(v []*string) *CaseDetails
SetCcEmailAddresses sets the CcEmailAddresses field's value.
func (*CaseDetails) SetDisplayId ¶
func (s *CaseDetails) SetDisplayId(v string) *CaseDetails
SetDisplayId sets the DisplayId field's value.
func (*CaseDetails) SetLanguage ¶
func (s *CaseDetails) SetLanguage(v string) *CaseDetails
SetLanguage sets the Language field's value.
func (*CaseDetails) SetRecentCommunications ¶
func (s *CaseDetails) SetRecentCommunications(v *RecentCaseCommunications) *CaseDetails
SetRecentCommunications sets the RecentCommunications field's value.
func (*CaseDetails) SetServiceCode ¶
func (s *CaseDetails) SetServiceCode(v string) *CaseDetails
SetServiceCode sets the ServiceCode field's value.
func (*CaseDetails) SetSeverityCode ¶
func (s *CaseDetails) SetSeverityCode(v string) *CaseDetails
SetSeverityCode sets the SeverityCode field's value.
func (*CaseDetails) SetStatus ¶
func (s *CaseDetails) SetStatus(v string) *CaseDetails
SetStatus sets the Status field's value.
func (*CaseDetails) SetSubject ¶
func (s *CaseDetails) SetSubject(v string) *CaseDetails
SetSubject sets the Subject field's value.
func (*CaseDetails) SetSubmittedBy ¶
func (s *CaseDetails) SetSubmittedBy(v string) *CaseDetails
SetSubmittedBy sets the SubmittedBy field's value.
func (*CaseDetails) SetTimeCreated ¶
func (s *CaseDetails) SetTimeCreated(v string) *CaseDetails
SetTimeCreated sets the TimeCreated field's value.
func (CaseDetails) String ¶
func (s CaseDetails) String() string
String returns the string representation
type Category ¶
type Category struct { // The category code for the support case. Code *string `locationName:"code" type:"string"` // The category name for the support case. Name *string `locationName:"name" type:"string"` // contains filtered or unexported fields }
A JSON-formatted name/value pair that represents the category name and category code of the problem, selected from the DescribeServices response for each AWS service. Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/Category
type Communication ¶
type Communication struct { // Information about the attachments to the case communication. AttachmentSet []*AttachmentDetails `locationName:"attachmentSet" type:"list"` // The text of the communication between the customer and AWS Support. Body *string `locationName:"body" min:"1" type:"string"` // The AWS Support case ID requested or returned in the call. The case ID is // an alphanumeric string formatted as shown in this example: case-12345678910-2013-c4c1d2bf33c5cf47 CaseId *string `locationName:"caseId" type:"string"` // The email address of the account that submitted the AWS Support case. SubmittedBy *string `locationName:"submittedBy" type:"string"` // The time the communication was created. TimeCreated *string `locationName:"timeCreated" type:"string"` // contains filtered or unexported fields }
A communication associated with an AWS Support case. The communication consists of the case ID, the message body, attachment information, the account email address, and the date and time of the communication. Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/Communication
func (Communication) GoString ¶
func (s Communication) GoString() string
GoString returns the string representation
func (*Communication) SetAttachmentSet ¶
func (s *Communication) SetAttachmentSet(v []*AttachmentDetails) *Communication
SetAttachmentSet sets the AttachmentSet field's value.
func (*Communication) SetBody ¶
func (s *Communication) SetBody(v string) *Communication
SetBody sets the Body field's value.
func (*Communication) SetCaseId ¶
func (s *Communication) SetCaseId(v string) *Communication
SetCaseId sets the CaseId field's value.
func (*Communication) SetSubmittedBy ¶
func (s *Communication) SetSubmittedBy(v string) *Communication
SetSubmittedBy sets the SubmittedBy field's value.
func (*Communication) SetTimeCreated ¶
func (s *Communication) SetTimeCreated(v string) *Communication
SetTimeCreated sets the TimeCreated field's value.
func (Communication) String ¶
func (s Communication) String() string
String returns the string representation
type CreateCaseInput ¶
type CreateCaseInput struct { // The ID of a set of one or more attachments for the case. Create the set by // using AddAttachmentsToSet. AttachmentSetId *string `locationName:"attachmentSetId" type:"string"` // The category of problem for the AWS Support case. CategoryCode *string `locationName:"categoryCode" type:"string"` // A list of email addresses that AWS Support copies on case correspondence. CcEmailAddresses []*string `locationName:"ccEmailAddresses" type:"list"` // The communication body text when you create an AWS Support case by calling // CreateCase. // // CommunicationBody is a required field CommunicationBody *string `locationName:"communicationBody" min:"1" type:"string" required:"true"` // The type of issue for the case. You can specify either "customer-service" // or "technical." If you do not indicate a value, the default is "technical." IssueType *string `locationName:"issueType" type:"string"` // The ISO 639-1 code for the language in which AWS provides support. AWS Support // currently supports English ("en") and Japanese ("ja"). Language parameters // must be passed explicitly for operations that take them. Language *string `locationName:"language" type:"string"` // The code for the AWS service returned by the call to DescribeServices. ServiceCode *string `locationName:"serviceCode" type:"string"` // The code for the severity level returned by the call to DescribeSeverityLevels. // // The availability of severity levels depends on each customer's support subscription. // In other words, your subscription may not necessarily require the urgent // level of response time. SeverityCode *string `locationName:"severityCode" type:"string"` // The title of the AWS Support case. // // Subject is a required field Subject *string `locationName:"subject" type:"string" required:"true"` // contains filtered or unexported fields }
Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/CreateCaseRequest
func (CreateCaseInput) GoString ¶
func (s CreateCaseInput) GoString() string
GoString returns the string representation
func (*CreateCaseInput) SetAttachmentSetId ¶
func (s *CreateCaseInput) SetAttachmentSetId(v string) *CreateCaseInput
SetAttachmentSetId sets the AttachmentSetId field's value.
func (*CreateCaseInput) SetCategoryCode ¶
func (s *CreateCaseInput) SetCategoryCode(v string) *CreateCaseInput
SetCategoryCode sets the CategoryCode field's value.
func (*CreateCaseInput) SetCcEmailAddresses ¶
func (s *CreateCaseInput) SetCcEmailAddresses(v []*string) *CreateCaseInput
SetCcEmailAddresses sets the CcEmailAddresses field's value.
func (*CreateCaseInput) SetCommunicationBody ¶
func (s *CreateCaseInput) SetCommunicationBody(v string) *CreateCaseInput
SetCommunicationBody sets the CommunicationBody field's value.
func (*CreateCaseInput) SetIssueType ¶
func (s *CreateCaseInput) SetIssueType(v string) *CreateCaseInput
SetIssueType sets the IssueType field's value.
func (*CreateCaseInput) SetLanguage ¶
func (s *CreateCaseInput) SetLanguage(v string) *CreateCaseInput
SetLanguage sets the Language field's value.
func (*CreateCaseInput) SetServiceCode ¶
func (s *CreateCaseInput) SetServiceCode(v string) *CreateCaseInput
SetServiceCode sets the ServiceCode field's value.
func (*CreateCaseInput) SetSeverityCode ¶
func (s *CreateCaseInput) SetSeverityCode(v string) *CreateCaseInput
SetSeverityCode sets the SeverityCode field's value.
func (*CreateCaseInput) SetSubject ¶
func (s *CreateCaseInput) SetSubject(v string) *CreateCaseInput
SetSubject sets the Subject field's value.
func (CreateCaseInput) String ¶
func (s CreateCaseInput) String() string
String returns the string representation
func (*CreateCaseInput) Validate ¶
func (s *CreateCaseInput) Validate() error
Validate inspects the fields of the type to determine if they are valid.
type CreateCaseOutput ¶
type CreateCaseOutput struct { // The AWS Support case ID requested or returned in the call. The case ID is // an alphanumeric string formatted as shown in this example: case-12345678910-2013-c4c1d2bf33c5cf47 CaseId *string `locationName:"caseId" type:"string"` // contains filtered or unexported fields }
The AWS Support case ID returned by a successful completion of the CreateCase operation. Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/CreateCaseResponse
func (CreateCaseOutput) GoString ¶
func (s CreateCaseOutput) GoString() string
GoString returns the string representation
func (*CreateCaseOutput) SetCaseId ¶
func (s *CreateCaseOutput) SetCaseId(v string) *CreateCaseOutput
SetCaseId sets the CaseId field's value.
func (CreateCaseOutput) String ¶
func (s CreateCaseOutput) String() string
String returns the string representation
type DescribeAttachmentInput ¶
type DescribeAttachmentInput struct { // The ID of the attachment to return. Attachment IDs are returned by the DescribeCommunications // operation. // // AttachmentId is a required field AttachmentId *string `locationName:"attachmentId" type:"string" required:"true"` // contains filtered or unexported fields }
Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/DescribeAttachmentRequest
func (DescribeAttachmentInput) GoString ¶
func (s DescribeAttachmentInput) GoString() string
GoString returns the string representation
func (*DescribeAttachmentInput) SetAttachmentId ¶
func (s *DescribeAttachmentInput) SetAttachmentId(v string) *DescribeAttachmentInput
SetAttachmentId sets the AttachmentId field's value.
func (DescribeAttachmentInput) String ¶
func (s DescribeAttachmentInput) String() string
String returns the string representation
func (*DescribeAttachmentInput) Validate ¶
func (s *DescribeAttachmentInput) Validate() error
Validate inspects the fields of the type to determine if they are valid.
type DescribeAttachmentOutput ¶
type DescribeAttachmentOutput struct { // The attachment content and file name. Attachment *Attachment `locationName:"attachment" type:"structure"` // contains filtered or unexported fields }
The content and file name of the attachment returned by the DescribeAttachment operation. Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/DescribeAttachmentResponse
func (DescribeAttachmentOutput) GoString ¶
func (s DescribeAttachmentOutput) GoString() string
GoString returns the string representation
func (*DescribeAttachmentOutput) SetAttachment ¶
func (s *DescribeAttachmentOutput) SetAttachment(v *Attachment) *DescribeAttachmentOutput
SetAttachment sets the Attachment field's value.
func (DescribeAttachmentOutput) String ¶
func (s DescribeAttachmentOutput) String() string
String returns the string representation
type DescribeCasesInput ¶
type DescribeCasesInput struct { // The start date for a filtered date search on support case communications. // Case communications are available for 12 months after creation. AfterTime *string `locationName:"afterTime" type:"string"` // The end date for a filtered date search on support case communications. Case // communications are available for 12 months after creation. BeforeTime *string `locationName:"beforeTime" type:"string"` // A list of ID numbers of the support cases you want returned. The maximum // number of cases is 100. CaseIdList []*string `locationName:"caseIdList" type:"list"` // The ID displayed for a case in the AWS Support Center user interface. DisplayId *string `locationName:"displayId" type:"string"` // Specifies whether communications should be included in the DescribeCases // results. The default is true. IncludeCommunications *bool `locationName:"includeCommunications" type:"boolean"` // Specifies whether resolved support cases should be included in the DescribeCases // results. The default is false. IncludeResolvedCases *bool `locationName:"includeResolvedCases" type:"boolean"` // The ISO 639-1 code for the language in which AWS provides support. AWS Support // currently supports English ("en") and Japanese ("ja"). Language parameters // must be passed explicitly for operations that take them. Language *string `locationName:"language" type:"string"` // The maximum number of results to return before paginating. MaxResults *int64 `locationName:"maxResults" min:"10" type:"integer"` // A resumption point for pagination. NextToken *string `locationName:"nextToken" type:"string"` // contains filtered or unexported fields }
Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/DescribeCasesRequest
func (DescribeCasesInput) GoString ¶
func (s DescribeCasesInput) GoString() string
GoString returns the string representation
func (*DescribeCasesInput) SetAfterTime ¶
func (s *DescribeCasesInput) SetAfterTime(v string) *DescribeCasesInput
SetAfterTime sets the AfterTime field's value.
func (*DescribeCasesInput) SetBeforeTime ¶
func (s *DescribeCasesInput) SetBeforeTime(v string) *DescribeCasesInput
SetBeforeTime sets the BeforeTime field's value.
func (*DescribeCasesInput) SetCaseIdList ¶
func (s *DescribeCasesInput) SetCaseIdList(v []*string) *DescribeCasesInput
SetCaseIdList sets the CaseIdList field's value.
func (*DescribeCasesInput) SetDisplayId ¶
func (s *DescribeCasesInput) SetDisplayId(v string) *DescribeCasesInput
SetDisplayId sets the DisplayId field's value.
func (*DescribeCasesInput) SetIncludeCommunications ¶
func (s *DescribeCasesInput) SetIncludeCommunications(v bool) *DescribeCasesInput
SetIncludeCommunications sets the IncludeCommunications field's value.
func (*DescribeCasesInput) SetIncludeResolvedCases ¶
func (s *DescribeCasesInput) SetIncludeResolvedCases(v bool) *DescribeCasesInput
SetIncludeResolvedCases sets the IncludeResolvedCases field's value.
func (*DescribeCasesInput) SetLanguage ¶
func (s *DescribeCasesInput) SetLanguage(v string) *DescribeCasesInput
SetLanguage sets the Language field's value.
func (*DescribeCasesInput) SetMaxResults ¶
func (s *DescribeCasesInput) SetMaxResults(v int64) *DescribeCasesInput
SetMaxResults sets the MaxResults field's value.
func (*DescribeCasesInput) SetNextToken ¶
func (s *DescribeCasesInput) SetNextToken(v string) *DescribeCasesInput
SetNextToken sets the NextToken field's value.
func (DescribeCasesInput) String ¶
func (s DescribeCasesInput) String() string
String returns the string representation
func (*DescribeCasesInput) Validate ¶
func (s *DescribeCasesInput) Validate() error
Validate inspects the fields of the type to determine if they are valid.
type DescribeCasesOutput ¶
type DescribeCasesOutput struct { // The details for the cases that match the request. Cases []*CaseDetails `locationName:"cases" type:"list"` // A resumption point for pagination. NextToken *string `locationName:"nextToken" type:"string"` // contains filtered or unexported fields }
Returns an array of CaseDetails objects and a nextToken that defines a point for pagination in the result set. Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/DescribeCasesResponse
func (DescribeCasesOutput) GoString ¶
func (s DescribeCasesOutput) GoString() string
GoString returns the string representation
func (*DescribeCasesOutput) SetCases ¶
func (s *DescribeCasesOutput) SetCases(v []*CaseDetails) *DescribeCasesOutput
SetCases sets the Cases field's value.
func (*DescribeCasesOutput) SetNextToken ¶
func (s *DescribeCasesOutput) SetNextToken(v string) *DescribeCasesOutput
SetNextToken sets the NextToken field's value.
func (DescribeCasesOutput) String ¶
func (s DescribeCasesOutput) String() string
String returns the string representation
type DescribeCommunicationsInput ¶
type DescribeCommunicationsInput struct { // The start date for a filtered date search on support case communications. // Case communications are available for 12 months after creation. AfterTime *string `locationName:"afterTime" type:"string"` // The end date for a filtered date search on support case communications. Case // communications are available for 12 months after creation. BeforeTime *string `locationName:"beforeTime" type:"string"` // The AWS Support case ID requested or returned in the call. The case ID is // an alphanumeric string formatted as shown in this example: case-12345678910-2013-c4c1d2bf33c5cf47 // // CaseId is a required field CaseId *string `locationName:"caseId" type:"string" required:"true"` // The maximum number of results to return before paginating. MaxResults *int64 `locationName:"maxResults" min:"10" type:"integer"` // A resumption point for pagination. NextToken *string `locationName:"nextToken" type:"string"` // contains filtered or unexported fields }
Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/DescribeCommunicationsRequest
func (DescribeCommunicationsInput) GoString ¶
func (s DescribeCommunicationsInput) GoString() string
GoString returns the string representation
func (*DescribeCommunicationsInput) SetAfterTime ¶
func (s *DescribeCommunicationsInput) SetAfterTime(v string) *DescribeCommunicationsInput
SetAfterTime sets the AfterTime field's value.
func (*DescribeCommunicationsInput) SetBeforeTime ¶
func (s *DescribeCommunicationsInput) SetBeforeTime(v string) *DescribeCommunicationsInput
SetBeforeTime sets the BeforeTime field's value.
func (*DescribeCommunicationsInput) SetCaseId ¶
func (s *DescribeCommunicationsInput) SetCaseId(v string) *DescribeCommunicationsInput
SetCaseId sets the CaseId field's value.
func (*DescribeCommunicationsInput) SetMaxResults ¶
func (s *DescribeCommunicationsInput) SetMaxResults(v int64) *DescribeCommunicationsInput
SetMaxResults sets the MaxResults field's value.
func (*DescribeCommunicationsInput) SetNextToken ¶
func (s *DescribeCommunicationsInput) SetNextToken(v string) *DescribeCommunicationsInput
SetNextToken sets the NextToken field's value.
func (DescribeCommunicationsInput) String ¶
func (s DescribeCommunicationsInput) String() string
String returns the string representation
func (*DescribeCommunicationsInput) Validate ¶
func (s *DescribeCommunicationsInput) Validate() error
Validate inspects the fields of the type to determine if they are valid.
type DescribeCommunicationsOutput ¶
type DescribeCommunicationsOutput struct { // The communications for the case. Communications []*Communication `locationName:"communications" type:"list"` // A resumption point for pagination. NextToken *string `locationName:"nextToken" type:"string"` // contains filtered or unexported fields }
The communications returned by the DescribeCommunications operation. Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/DescribeCommunicationsResponse
func (DescribeCommunicationsOutput) GoString ¶
func (s DescribeCommunicationsOutput) GoString() string
GoString returns the string representation
func (*DescribeCommunicationsOutput) SetCommunications ¶
func (s *DescribeCommunicationsOutput) SetCommunications(v []*Communication) *DescribeCommunicationsOutput
SetCommunications sets the Communications field's value.
func (*DescribeCommunicationsOutput) SetNextToken ¶
func (s *DescribeCommunicationsOutput) SetNextToken(v string) *DescribeCommunicationsOutput
SetNextToken sets the NextToken field's value.
func (DescribeCommunicationsOutput) String ¶
func (s DescribeCommunicationsOutput) String() string
String returns the string representation
type DescribeServicesInput ¶
type DescribeServicesInput struct { // The ISO 639-1 code for the language in which AWS provides support. AWS Support // currently supports English ("en") and Japanese ("ja"). Language parameters // must be passed explicitly for operations that take them. Language *string `locationName:"language" type:"string"` // A JSON-formatted list of service codes available for AWS services. ServiceCodeList []*string `locationName:"serviceCodeList" type:"list"` // contains filtered or unexported fields }
Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/DescribeServicesRequest
func (DescribeServicesInput) GoString ¶
func (s DescribeServicesInput) GoString() string
GoString returns the string representation
func (*DescribeServicesInput) SetLanguage ¶
func (s *DescribeServicesInput) SetLanguage(v string) *DescribeServicesInput
SetLanguage sets the Language field's value.
func (*DescribeServicesInput) SetServiceCodeList ¶
func (s *DescribeServicesInput) SetServiceCodeList(v []*string) *DescribeServicesInput
SetServiceCodeList sets the ServiceCodeList field's value.
func (DescribeServicesInput) String ¶
func (s DescribeServicesInput) String() string
String returns the string representation
type DescribeServicesOutput ¶
type DescribeServicesOutput struct { // A JSON-formatted list of AWS services. Services []*Service `locationName:"services" type:"list"` // contains filtered or unexported fields }
The list of AWS services returned by the DescribeServices operation. Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/DescribeServicesResponse
func (DescribeServicesOutput) GoString ¶
func (s DescribeServicesOutput) GoString() string
GoString returns the string representation
func (*DescribeServicesOutput) SetServices ¶
func (s *DescribeServicesOutput) SetServices(v []*Service) *DescribeServicesOutput
SetServices sets the Services field's value.
func (DescribeServicesOutput) String ¶
func (s DescribeServicesOutput) String() string
String returns the string representation
type DescribeSeverityLevelsInput ¶
type DescribeSeverityLevelsInput struct { // The ISO 639-1 code for the language in which AWS provides support. AWS Support // currently supports English ("en") and Japanese ("ja"). Language parameters // must be passed explicitly for operations that take them. Language *string `locationName:"language" type:"string"` // contains filtered or unexported fields }
Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/DescribeSeverityLevelsRequest
func (DescribeSeverityLevelsInput) GoString ¶
func (s DescribeSeverityLevelsInput) GoString() string
GoString returns the string representation
func (*DescribeSeverityLevelsInput) SetLanguage ¶
func (s *DescribeSeverityLevelsInput) SetLanguage(v string) *DescribeSeverityLevelsInput
SetLanguage sets the Language field's value.
func (DescribeSeverityLevelsInput) String ¶
func (s DescribeSeverityLevelsInput) String() string
String returns the string representation
type DescribeSeverityLevelsOutput ¶
type DescribeSeverityLevelsOutput struct { // The available severity levels for the support case. Available severity levels // are defined by your service level agreement with AWS. SeverityLevels []*SeverityLevel `locationName:"severityLevels" type:"list"` // contains filtered or unexported fields }
The list of severity levels returned by the DescribeSeverityLevels operation. Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/DescribeSeverityLevelsResponse
func (DescribeSeverityLevelsOutput) GoString ¶
func (s DescribeSeverityLevelsOutput) GoString() string
GoString returns the string representation
func (*DescribeSeverityLevelsOutput) SetSeverityLevels ¶
func (s *DescribeSeverityLevelsOutput) SetSeverityLevels(v []*SeverityLevel) *DescribeSeverityLevelsOutput
SetSeverityLevels sets the SeverityLevels field's value.
func (DescribeSeverityLevelsOutput) String ¶
func (s DescribeSeverityLevelsOutput) String() string
String returns the string representation
type DescribeTrustedAdvisorCheckRefreshStatusesInput ¶
type DescribeTrustedAdvisorCheckRefreshStatusesInput struct { // The IDs of the Trusted Advisor checks to get the status of. Note: Specifying // the check ID of a check that is automatically refreshed causes an InvalidParameterValue // error. // // CheckIds is a required field CheckIds []*string `locationName:"checkIds" type:"list" required:"true"` // contains filtered or unexported fields }
Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/DescribeTrustedAdvisorCheckRefreshStatusesRequest
func (DescribeTrustedAdvisorCheckRefreshStatusesInput) GoString ¶
func (s DescribeTrustedAdvisorCheckRefreshStatusesInput) GoString() string
GoString returns the string representation
func (*DescribeTrustedAdvisorCheckRefreshStatusesInput) SetCheckIds ¶
func (s *DescribeTrustedAdvisorCheckRefreshStatusesInput) SetCheckIds(v []*string) *DescribeTrustedAdvisorCheckRefreshStatusesInput
SetCheckIds sets the CheckIds field's value.
func (DescribeTrustedAdvisorCheckRefreshStatusesInput) String ¶
func (s DescribeTrustedAdvisorCheckRefreshStatusesInput) String() string
String returns the string representation
func (*DescribeTrustedAdvisorCheckRefreshStatusesInput) Validate ¶
func (s *DescribeTrustedAdvisorCheckRefreshStatusesInput) Validate() error
Validate inspects the fields of the type to determine if they are valid.
type DescribeTrustedAdvisorCheckRefreshStatusesOutput ¶
type DescribeTrustedAdvisorCheckRefreshStatusesOutput struct { // The refresh status of the specified Trusted Advisor checks. // // Statuses is a required field Statuses []*TrustedAdvisorCheckRefreshStatus `locationName:"statuses" type:"list" required:"true"` // contains filtered or unexported fields }
The statuses of the Trusted Advisor checks returned by the DescribeTrustedAdvisorCheckRefreshStatuses operation. Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/DescribeTrustedAdvisorCheckRefreshStatusesResponse
func (DescribeTrustedAdvisorCheckRefreshStatusesOutput) GoString ¶
func (s DescribeTrustedAdvisorCheckRefreshStatusesOutput) GoString() string
GoString returns the string representation
func (*DescribeTrustedAdvisorCheckRefreshStatusesOutput) SetStatuses ¶
func (s *DescribeTrustedAdvisorCheckRefreshStatusesOutput) SetStatuses(v []*TrustedAdvisorCheckRefreshStatus) *DescribeTrustedAdvisorCheckRefreshStatusesOutput
SetStatuses sets the Statuses field's value.
func (DescribeTrustedAdvisorCheckRefreshStatusesOutput) String ¶
func (s DescribeTrustedAdvisorCheckRefreshStatusesOutput) String() string
String returns the string representation
type DescribeTrustedAdvisorCheckResultInput ¶
type DescribeTrustedAdvisorCheckResultInput struct { // The unique identifier for the Trusted Advisor check. // // CheckId is a required field CheckId *string `locationName:"checkId" type:"string" required:"true"` // The ISO 639-1 code for the language in which AWS provides support. AWS Support // currently supports English ("en") and Japanese ("ja"). Language parameters // must be passed explicitly for operations that take them. Language *string `locationName:"language" type:"string"` // contains filtered or unexported fields }
Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/DescribeTrustedAdvisorCheckResultRequest
func (DescribeTrustedAdvisorCheckResultInput) GoString ¶
func (s DescribeTrustedAdvisorCheckResultInput) GoString() string
GoString returns the string representation
func (*DescribeTrustedAdvisorCheckResultInput) SetCheckId ¶
func (s *DescribeTrustedAdvisorCheckResultInput) SetCheckId(v string) *DescribeTrustedAdvisorCheckResultInput
SetCheckId sets the CheckId field's value.
func (*DescribeTrustedAdvisorCheckResultInput) SetLanguage ¶
func (s *DescribeTrustedAdvisorCheckResultInput) SetLanguage(v string) *DescribeTrustedAdvisorCheckResultInput
SetLanguage sets the Language field's value.
func (DescribeTrustedAdvisorCheckResultInput) String ¶
func (s DescribeTrustedAdvisorCheckResultInput) String() string
String returns the string representation
func (*DescribeTrustedAdvisorCheckResultInput) Validate ¶
func (s *DescribeTrustedAdvisorCheckResultInput) Validate() error
Validate inspects the fields of the type to determine if they are valid.
type DescribeTrustedAdvisorCheckResultOutput ¶
type DescribeTrustedAdvisorCheckResultOutput struct { // The detailed results of the Trusted Advisor check. Result *TrustedAdvisorCheckResult `locationName:"result" type:"structure"` // contains filtered or unexported fields }
The result of the Trusted Advisor check returned by the DescribeTrustedAdvisorCheckResult operation. Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/DescribeTrustedAdvisorCheckResultResponse
func (DescribeTrustedAdvisorCheckResultOutput) GoString ¶
func (s DescribeTrustedAdvisorCheckResultOutput) GoString() string
GoString returns the string representation
func (*DescribeTrustedAdvisorCheckResultOutput) SetResult ¶
func (s *DescribeTrustedAdvisorCheckResultOutput) SetResult(v *TrustedAdvisorCheckResult) *DescribeTrustedAdvisorCheckResultOutput
SetResult sets the Result field's value.
func (DescribeTrustedAdvisorCheckResultOutput) String ¶
func (s DescribeTrustedAdvisorCheckResultOutput) String() string
String returns the string representation
type DescribeTrustedAdvisorCheckSummariesInput ¶
type DescribeTrustedAdvisorCheckSummariesInput struct { // The IDs of the Trusted Advisor checks. // // CheckIds is a required field CheckIds []*string `locationName:"checkIds" type:"list" required:"true"` // contains filtered or unexported fields }
Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/DescribeTrustedAdvisorCheckSummariesRequest
func (DescribeTrustedAdvisorCheckSummariesInput) GoString ¶
func (s DescribeTrustedAdvisorCheckSummariesInput) GoString() string
GoString returns the string representation
func (*DescribeTrustedAdvisorCheckSummariesInput) SetCheckIds ¶
func (s *DescribeTrustedAdvisorCheckSummariesInput) SetCheckIds(v []*string) *DescribeTrustedAdvisorCheckSummariesInput
SetCheckIds sets the CheckIds field's value.
func (DescribeTrustedAdvisorCheckSummariesInput) String ¶
func (s DescribeTrustedAdvisorCheckSummariesInput) String() string
String returns the string representation
func (*DescribeTrustedAdvisorCheckSummariesInput) Validate ¶
func (s *DescribeTrustedAdvisorCheckSummariesInput) Validate() error
Validate inspects the fields of the type to determine if they are valid.
type DescribeTrustedAdvisorCheckSummariesOutput ¶
type DescribeTrustedAdvisorCheckSummariesOutput struct { // The summary information for the requested Trusted Advisor checks. // // Summaries is a required field Summaries []*TrustedAdvisorCheckSummary `locationName:"summaries" type:"list" required:"true"` // contains filtered or unexported fields }
The summaries of the Trusted Advisor checks returned by the DescribeTrustedAdvisorCheckSummaries operation. Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/DescribeTrustedAdvisorCheckSummariesResponse
func (DescribeTrustedAdvisorCheckSummariesOutput) GoString ¶
func (s DescribeTrustedAdvisorCheckSummariesOutput) GoString() string
GoString returns the string representation
func (*DescribeTrustedAdvisorCheckSummariesOutput) SetSummaries ¶
func (s *DescribeTrustedAdvisorCheckSummariesOutput) SetSummaries(v []*TrustedAdvisorCheckSummary) *DescribeTrustedAdvisorCheckSummariesOutput
SetSummaries sets the Summaries field's value.
func (DescribeTrustedAdvisorCheckSummariesOutput) String ¶
func (s DescribeTrustedAdvisorCheckSummariesOutput) String() string
String returns the string representation
type DescribeTrustedAdvisorChecksInput ¶
type DescribeTrustedAdvisorChecksInput struct { // The ISO 639-1 code for the language in which AWS provides support. AWS Support // currently supports English ("en") and Japanese ("ja"). Language parameters // must be passed explicitly for operations that take them. // // Language is a required field Language *string `locationName:"language" type:"string" required:"true"` // contains filtered or unexported fields }
Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/DescribeTrustedAdvisorChecksRequest
func (DescribeTrustedAdvisorChecksInput) GoString ¶
func (s DescribeTrustedAdvisorChecksInput) GoString() string
GoString returns the string representation
func (*DescribeTrustedAdvisorChecksInput) SetLanguage ¶
func (s *DescribeTrustedAdvisorChecksInput) SetLanguage(v string) *DescribeTrustedAdvisorChecksInput
SetLanguage sets the Language field's value.
func (DescribeTrustedAdvisorChecksInput) String ¶
func (s DescribeTrustedAdvisorChecksInput) String() string
String returns the string representation
func (*DescribeTrustedAdvisorChecksInput) Validate ¶
func (s *DescribeTrustedAdvisorChecksInput) Validate() error
Validate inspects the fields of the type to determine if they are valid.
type DescribeTrustedAdvisorChecksOutput ¶
type DescribeTrustedAdvisorChecksOutput struct { // Information about all available Trusted Advisor checks. // // Checks is a required field Checks []*TrustedAdvisorCheckDescription `locationName:"checks" type:"list" required:"true"` // contains filtered or unexported fields }
Information about the Trusted Advisor checks returned by the DescribeTrustedAdvisorChecks operation. Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/DescribeTrustedAdvisorChecksResponse
func (DescribeTrustedAdvisorChecksOutput) GoString ¶
func (s DescribeTrustedAdvisorChecksOutput) GoString() string
GoString returns the string representation
func (*DescribeTrustedAdvisorChecksOutput) SetChecks ¶
func (s *DescribeTrustedAdvisorChecksOutput) SetChecks(v []*TrustedAdvisorCheckDescription) *DescribeTrustedAdvisorChecksOutput
SetChecks sets the Checks field's value.
func (DescribeTrustedAdvisorChecksOutput) String ¶
func (s DescribeTrustedAdvisorChecksOutput) String() string
String returns the string representation
type RecentCaseCommunications ¶
type RecentCaseCommunications struct { // The five most recent communications associated with the case. Communications []*Communication `locationName:"communications" type:"list"` // A resumption point for pagination. NextToken *string `locationName:"nextToken" type:"string"` // contains filtered or unexported fields }
The five most recent communications associated with the case. Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/RecentCaseCommunications
func (RecentCaseCommunications) GoString ¶
func (s RecentCaseCommunications) GoString() string
GoString returns the string representation
func (*RecentCaseCommunications) SetCommunications ¶
func (s *RecentCaseCommunications) SetCommunications(v []*Communication) *RecentCaseCommunications
SetCommunications sets the Communications field's value.
func (*RecentCaseCommunications) SetNextToken ¶
func (s *RecentCaseCommunications) SetNextToken(v string) *RecentCaseCommunications
SetNextToken sets the NextToken field's value.
func (RecentCaseCommunications) String ¶
func (s RecentCaseCommunications) String() string
String returns the string representation
type RefreshTrustedAdvisorCheckInput ¶
type RefreshTrustedAdvisorCheckInput struct { // The unique identifier for the Trusted Advisor check to refresh. Note: Specifying // the check ID of a check that is automatically refreshed causes an InvalidParameterValue // error. // // CheckId is a required field CheckId *string `locationName:"checkId" type:"string" required:"true"` // contains filtered or unexported fields }
Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/RefreshTrustedAdvisorCheckRequest
func (RefreshTrustedAdvisorCheckInput) GoString ¶
func (s RefreshTrustedAdvisorCheckInput) GoString() string
GoString returns the string representation
func (*RefreshTrustedAdvisorCheckInput) SetCheckId ¶
func (s *RefreshTrustedAdvisorCheckInput) SetCheckId(v string) *RefreshTrustedAdvisorCheckInput
SetCheckId sets the CheckId field's value.
func (RefreshTrustedAdvisorCheckInput) String ¶
func (s RefreshTrustedAdvisorCheckInput) String() string
String returns the string representation
func (*RefreshTrustedAdvisorCheckInput) Validate ¶
func (s *RefreshTrustedAdvisorCheckInput) Validate() error
Validate inspects the fields of the type to determine if they are valid.
type RefreshTrustedAdvisorCheckOutput ¶
type RefreshTrustedAdvisorCheckOutput struct { // The current refresh status for a check, including the amount of time until // the check is eligible for refresh. // // Status is a required field Status *TrustedAdvisorCheckRefreshStatus `locationName:"status" type:"structure" required:"true"` // contains filtered or unexported fields }
The current refresh status of a Trusted Advisor check. Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/RefreshTrustedAdvisorCheckResponse
func (RefreshTrustedAdvisorCheckOutput) GoString ¶
func (s RefreshTrustedAdvisorCheckOutput) GoString() string
GoString returns the string representation
func (*RefreshTrustedAdvisorCheckOutput) SetStatus ¶
func (s *RefreshTrustedAdvisorCheckOutput) SetStatus(v *TrustedAdvisorCheckRefreshStatus) *RefreshTrustedAdvisorCheckOutput
SetStatus sets the Status field's value.
func (RefreshTrustedAdvisorCheckOutput) String ¶
func (s RefreshTrustedAdvisorCheckOutput) String() string
String returns the string representation
type ResolveCaseInput ¶
type ResolveCaseInput struct { // The AWS Support case ID requested or returned in the call. The case ID is // an alphanumeric string formatted as shown in this example: case-12345678910-2013-c4c1d2bf33c5cf47 CaseId *string `locationName:"caseId" type:"string"` // contains filtered or unexported fields }
Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/ResolveCaseRequest
func (ResolveCaseInput) GoString ¶
func (s ResolveCaseInput) GoString() string
GoString returns the string representation
func (*ResolveCaseInput) SetCaseId ¶
func (s *ResolveCaseInput) SetCaseId(v string) *ResolveCaseInput
SetCaseId sets the CaseId field's value.
func (ResolveCaseInput) String ¶
func (s ResolveCaseInput) String() string
String returns the string representation
type ResolveCaseOutput ¶
type ResolveCaseOutput struct { // The status of the case after the ResolveCase request was processed. FinalCaseStatus *string `locationName:"finalCaseStatus" type:"string"` // The status of the case when the ResolveCase request was sent. InitialCaseStatus *string `locationName:"initialCaseStatus" type:"string"` // contains filtered or unexported fields }
The status of the case returned by the ResolveCase operation. Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/ResolveCaseResponse
func (ResolveCaseOutput) GoString ¶
func (s ResolveCaseOutput) GoString() string
GoString returns the string representation
func (*ResolveCaseOutput) SetFinalCaseStatus ¶
func (s *ResolveCaseOutput) SetFinalCaseStatus(v string) *ResolveCaseOutput
SetFinalCaseStatus sets the FinalCaseStatus field's value.
func (*ResolveCaseOutput) SetInitialCaseStatus ¶
func (s *ResolveCaseOutput) SetInitialCaseStatus(v string) *ResolveCaseOutput
SetInitialCaseStatus sets the InitialCaseStatus field's value.
func (ResolveCaseOutput) String ¶
func (s ResolveCaseOutput) String() string
String returns the string representation
type Service ¶
type Service struct { // A list of categories that describe the type of support issue a case describes. // Categories consist of a category name and a category code. Category names // and codes are passed to AWS Support when you call CreateCase. Categories []*Category `locationName:"categories" type:"list"` // The code for an AWS service returned by the DescribeServices response. The // name element contains the corresponding friendly name. Code *string `locationName:"code" type:"string"` // The friendly name for an AWS service. The code element contains the corresponding // code. Name *string `locationName:"name" type:"string"` // contains filtered or unexported fields }
Information about an AWS service returned by the DescribeServices operation. Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/Service
func (*Service) SetCategories ¶
SetCategories sets the Categories field's value.
type SeverityLevel ¶
type SeverityLevel struct { // One of four values: "low," "medium," "high," and "urgent". These values correspond // to response times returned to the caller in severityLevel.name. Code *string `locationName:"code" type:"string"` // The name of the severity level that corresponds to the severity level code. Name *string `locationName:"name" type:"string"` // contains filtered or unexported fields }
A code and name pair that represent a severity level that can be applied to a support case. Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/SeverityLevel
func (SeverityLevel) GoString ¶
func (s SeverityLevel) GoString() string
GoString returns the string representation
func (*SeverityLevel) SetCode ¶
func (s *SeverityLevel) SetCode(v string) *SeverityLevel
SetCode sets the Code field's value.
func (*SeverityLevel) SetName ¶
func (s *SeverityLevel) SetName(v string) *SeverityLevel
SetName sets the Name field's value.
func (SeverityLevel) String ¶
func (s SeverityLevel) String() string
String returns the string representation
type Support ¶
The AWS Support API reference is intended for programmers who need detailed information about the AWS Support operations and data types. This service enables you to manage your AWS Support cases programmatically. It uses HTTP methods that return results in JSON format.
The AWS Support service also exposes a set of Trusted Advisor (http://aws.amazon.com/premiumsupport/trustedadvisor/) features. You can retrieve a list of checks and their descriptions, get check results, specify checks to refresh, and get the refresh status of checks.
The following list describes the AWS Support case management operations:
Service names, issue categories, and available severity levels. The DescribeServices and DescribeSeverityLevels operations return AWS service names, service codes, service categories, and problem severity levels. You use these values when you call the CreateCase operation.
Case creation, case details, and case resolution. The CreateCase, DescribeCases, DescribeAttachment, and ResolveCase operations create AWS Support cases, retrieve information about cases, and resolve cases.
Case communication. The DescribeCommunications, AddCommunicationToCase, and AddAttachmentsToSet operations retrieve and add communications and attachments to AWS Support cases.
The following list describes the operations available from the AWS Support service for Trusted Advisor:
DescribeTrustedAdvisorChecks returns the list of checks that run against your AWS resources.
Using the checkId for a specific check returned by DescribeTrustedAdvisorChecks, you can call DescribeTrustedAdvisorCheckResult to obtain the results for the check you specified.
DescribeTrustedAdvisorCheckSummaries returns summarized results for one or more Trusted Advisor checks.
RefreshTrustedAdvisorCheck requests that Trusted Advisor rerun a specified check.
DescribeTrustedAdvisorCheckRefreshStatuses reports the refresh status of one or more checks.
For authentication of requests, AWS Support uses Signature Version 4 Signing Process (http://docs.aws.amazon.com/general/latest/gr/signature-version-4.html).
See About the AWS Support API (http://docs.aws.amazon.com/awssupport/latest/user/Welcome.html) in the AWS Support User Guide for information about how to use this service to create and manage your support cases, and how to call Trusted Advisor for results of checks on your resources. The service client's operations are safe to be used concurrently. It is not safe to mutate any of the client's properties though. Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15
func New ¶
func New(p client.ConfigProvider, cfgs ...*aws.Config) *Support
New creates a new instance of the Support client with a session. If additional configuration is needed for the client instance use the optional aws.Config parameter to add your extra config.
Example:
// Create a Support client from just a session. svc := support.New(mySession) // Create a Support client with additional configuration svc := support.New(mySession, aws.NewConfig().WithRegion("us-west-2"))
func (*Support) AddAttachmentsToSet ¶
func (c *Support) AddAttachmentsToSet(input *AddAttachmentsToSetInput) (*AddAttachmentsToSetOutput, error)
AddAttachmentsToSet API operation for AWS Support.
Adds one or more attachments to an attachment set. If an attachmentSetId is not specified, a new attachment set is created, and the ID of the set is returned in the response. If an attachmentSetId is specified, the attachments are added to the specified set, if it exists.
An attachment set is a temporary container for attachments that are to be added to a case or case communication. The set is available for one hour after it is created; the expiryTime returned in the response indicates when the set expires. The maximum number of attachments in a set is 3, and the maximum size of any attachment in the set is 5 MB.
Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.
See the AWS API reference guide for AWS Support's API operation AddAttachmentsToSet for usage and error information.
Returned Error Codes:
InternalServerError An internal server error occurred.
AttachmentSetIdNotFound An attachment set with the specified ID could not be found.
AttachmentSetExpired The expiration time of the attachment set has passed. The set expires 1 hour after it is created.
AttachmentSetSizeLimitExceeded A limit for the size of an attachment set has been exceeded. The limits are 3 attachments and 5 MB per attachment.
AttachmentLimitExceeded The limit for the number of attachment sets created in a short period of time has been exceeded.
Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/AddAttachmentsToSet
Example ¶
package main import ( "fmt" "github.com/aws/aws-sdk-go/aws" "github.com/aws/aws-sdk-go/aws/session" "github.com/aws/aws-sdk-go/service/support" ) func main() { sess, err := session.NewSession() if err != nil { fmt.Println("failed to create session,", err) return } svc := support.New(sess) params := &support.AddAttachmentsToSetInput{ Attachments: []*support.Attachment{ // Required { // Required Data: []byte("PAYLOAD"), FileName: aws.String("FileName"), }, // More values... }, AttachmentSetId: aws.String("AttachmentSetId"), } resp, err := svc.AddAttachmentsToSet(params) if err != nil { // Print the error, cast err to awserr.Error to get the Code and // Message from an error. fmt.Println(err.Error()) return } // Pretty-print the response data. fmt.Println(resp) }
Output:
func (*Support) AddAttachmentsToSetRequest ¶
func (c *Support) AddAttachmentsToSetRequest(input *AddAttachmentsToSetInput) (req *request.Request, output *AddAttachmentsToSetOutput)
AddAttachmentsToSetRequest generates a "aws/request.Request" representing the client's request for the AddAttachmentsToSet operation. The "output" return value can be used to capture response data after the request's "Send" method is called.
See AddAttachmentsToSet for usage and error information.
Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the AddAttachmentsToSet method directly instead.
Note: You must call the "Send" method on the returned request object in order to execute the request.
// Example sending a request using the AddAttachmentsToSetRequest method. req, resp := client.AddAttachmentsToSetRequest(params) err := req.Send() if err == nil { // resp is now filled fmt.Println(resp) }
Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/AddAttachmentsToSet
func (*Support) AddCommunicationToCase ¶
func (c *Support) AddCommunicationToCase(input *AddCommunicationToCaseInput) (*AddCommunicationToCaseOutput, error)
AddCommunicationToCase API operation for AWS Support.
Adds additional customer communication to an AWS Support case. You use the caseId value to identify the case to add communication to. You can list a set of email addresses to copy on the communication using the ccEmailAddresses value. The communicationBody value contains the text of the communication.
The response indicates the success or failure of the request.
This operation implements a subset of the features of the AWS Support Center.
Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.
See the AWS API reference guide for AWS Support's API operation AddCommunicationToCase for usage and error information.
Returned Error Codes:
InternalServerError An internal server error occurred.
CaseIdNotFound The requested caseId could not be located.
AttachmentSetIdNotFound An attachment set with the specified ID could not be found.
AttachmentSetExpired The expiration time of the attachment set has passed. The set expires 1 hour after it is created.
Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/AddCommunicationToCase
Example ¶
package main import ( "fmt" "github.com/aws/aws-sdk-go/aws" "github.com/aws/aws-sdk-go/aws/session" "github.com/aws/aws-sdk-go/service/support" ) func main() { sess, err := session.NewSession() if err != nil { fmt.Println("failed to create session,", err) return } svc := support.New(sess) params := &support.AddCommunicationToCaseInput{ CommunicationBody: aws.String("CommunicationBody"), // Required AttachmentSetId: aws.String("AttachmentSetId"), CaseId: aws.String("CaseId"), CcEmailAddresses: []*string{ aws.String("CcEmailAddress"), // Required // More values... }, } resp, err := svc.AddCommunicationToCase(params) if err != nil { // Print the error, cast err to awserr.Error to get the Code and // Message from an error. fmt.Println(err.Error()) return } // Pretty-print the response data. fmt.Println(resp) }
Output:
func (*Support) AddCommunicationToCaseRequest ¶
func (c *Support) AddCommunicationToCaseRequest(input *AddCommunicationToCaseInput) (req *request.Request, output *AddCommunicationToCaseOutput)
AddCommunicationToCaseRequest generates a "aws/request.Request" representing the client's request for the AddCommunicationToCase operation. The "output" return value can be used to capture response data after the request's "Send" method is called.
See AddCommunicationToCase for usage and error information.
Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the AddCommunicationToCase method directly instead.
Note: You must call the "Send" method on the returned request object in order to execute the request.
// Example sending a request using the AddCommunicationToCaseRequest method. req, resp := client.AddCommunicationToCaseRequest(params) err := req.Send() if err == nil { // resp is now filled fmt.Println(resp) }
Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/AddCommunicationToCase
func (*Support) CreateCase ¶
func (c *Support) CreateCase(input *CreateCaseInput) (*CreateCaseOutput, error)
CreateCase API operation for AWS Support.
Creates a new case in the AWS Support Center. This operation is modeled on the behavior of the AWS Support Center Create Case (https://console.aws.amazon.com/support/home#/case/create) page. Its parameters require you to specify the following information:
issueType. The type of issue for the case. You can specify either "customer-service" or "technical." If you do not indicate a value, the default is "technical."
serviceCode. The code for an AWS service. You obtain the serviceCode by calling DescribeServices.
categoryCode. The category for the service defined for the serviceCode value. You also obtain the category code for a service by calling DescribeServices. Each AWS service defines its own set of category codes.
severityCode. A value that indicates the urgency of the case, which in turn determines the response time according to your service level agreement with AWS Support. You obtain the SeverityCode by calling DescribeSeverityLevels.
subject. The Subject field on the AWS Support Center Create Case (https://console.aws.amazon.com/support/home#/case/create) page.
communicationBody. The Description field on the AWS Support Center Create Case (https://console.aws.amazon.com/support/home#/case/create) page.
attachmentSetId. The ID of a set of attachments that has been created by using AddAttachmentsToSet.
language. The human language in which AWS Support handles the case. English and Japanese are currently supported.
ccEmailAddresses. The AWS Support Center CC field on the Create Case (https://console.aws.amazon.com/support/home#/case/create) page. You can list email addresses to be copied on any correspondence about the case. The account that opens the case is already identified by passing the AWS Credentials in the HTTP POST method or in a method or function call from one of the programming languages supported by an AWS SDK (http://aws.amazon.com/tools/).
To add additional communication or attachments to an existing case, use AddCommunicationToCase.
A successful CreateCase request returns an AWS Support case number. Case numbers are used by the DescribeCases operation to retrieve existing AWS Support cases.
Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.
See the AWS API reference guide for AWS Support's API operation CreateCase for usage and error information.
Returned Error Codes:
InternalServerError An internal server error occurred.
CaseCreationLimitExceeded The case creation limit for the account has been exceeded.
AttachmentSetIdNotFound An attachment set with the specified ID could not be found.
AttachmentSetExpired The expiration time of the attachment set has passed. The set expires 1 hour after it is created.
Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/CreateCase
Example ¶
package main import ( "fmt" "github.com/aws/aws-sdk-go/aws" "github.com/aws/aws-sdk-go/aws/session" "github.com/aws/aws-sdk-go/service/support" ) func main() { sess, err := session.NewSession() if err != nil { fmt.Println("failed to create session,", err) return } svc := support.New(sess) params := &support.CreateCaseInput{ CommunicationBody: aws.String("CommunicationBody"), // Required Subject: aws.String("Subject"), // Required AttachmentSetId: aws.String("AttachmentSetId"), CategoryCode: aws.String("CategoryCode"), CcEmailAddresses: []*string{ aws.String("CcEmailAddress"), // Required // More values... }, IssueType: aws.String("IssueType"), Language: aws.String("Language"), ServiceCode: aws.String("ServiceCode"), SeverityCode: aws.String("SeverityCode"), } resp, err := svc.CreateCase(params) if err != nil { // Print the error, cast err to awserr.Error to get the Code and // Message from an error. fmt.Println(err.Error()) return } // Pretty-print the response data. fmt.Println(resp) }
Output:
func (*Support) CreateCaseRequest ¶
func (c *Support) CreateCaseRequest(input *CreateCaseInput) (req *request.Request, output *CreateCaseOutput)
CreateCaseRequest generates a "aws/request.Request" representing the client's request for the CreateCase operation. The "output" return value can be used to capture response data after the request's "Send" method is called.
See CreateCase for usage and error information.
Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the CreateCase method directly instead.
Note: You must call the "Send" method on the returned request object in order to execute the request.
// Example sending a request using the CreateCaseRequest method. req, resp := client.CreateCaseRequest(params) err := req.Send() if err == nil { // resp is now filled fmt.Println(resp) }
Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/CreateCase
func (*Support) DescribeAttachment ¶
func (c *Support) DescribeAttachment(input *DescribeAttachmentInput) (*DescribeAttachmentOutput, error)
DescribeAttachment API operation for AWS Support.
Returns the attachment that has the specified ID. Attachment IDs are generated by the case management system when you add an attachment to a case or case communication. Attachment IDs are returned in the AttachmentDetails objects that are returned by the DescribeCommunications operation.
Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.
See the AWS API reference guide for AWS Support's API operation DescribeAttachment for usage and error information.
Returned Error Codes:
InternalServerError An internal server error occurred.
DescribeAttachmentLimitExceeded The limit for the number of DescribeAttachment requests in a short period of time has been exceeded.
AttachmentIdNotFound An attachment with the specified ID could not be found.
Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/DescribeAttachment
Example ¶
package main import ( "fmt" "github.com/aws/aws-sdk-go/aws" "github.com/aws/aws-sdk-go/aws/session" "github.com/aws/aws-sdk-go/service/support" ) func main() { sess, err := session.NewSession() if err != nil { fmt.Println("failed to create session,", err) return } svc := support.New(sess) params := &support.DescribeAttachmentInput{ AttachmentId: aws.String("AttachmentId"), // Required } resp, err := svc.DescribeAttachment(params) if err != nil { // Print the error, cast err to awserr.Error to get the Code and // Message from an error. fmt.Println(err.Error()) return } // Pretty-print the response data. fmt.Println(resp) }
Output:
func (*Support) DescribeAttachmentRequest ¶
func (c *Support) DescribeAttachmentRequest(input *DescribeAttachmentInput) (req *request.Request, output *DescribeAttachmentOutput)
DescribeAttachmentRequest generates a "aws/request.Request" representing the client's request for the DescribeAttachment operation. The "output" return value can be used to capture response data after the request's "Send" method is called.
See DescribeAttachment for usage and error information.
Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DescribeAttachment method directly instead.
Note: You must call the "Send" method on the returned request object in order to execute the request.
// Example sending a request using the DescribeAttachmentRequest method. req, resp := client.DescribeAttachmentRequest(params) err := req.Send() if err == nil { // resp is now filled fmt.Println(resp) }
Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/DescribeAttachment
func (*Support) DescribeCases ¶
func (c *Support) DescribeCases(input *DescribeCasesInput) (*DescribeCasesOutput, error)
DescribeCases API operation for AWS Support.
Returns a list of cases that you specify by passing one or more case IDs. In addition, you can filter the cases by date by setting values for the afterTime and beforeTime request parameters. You can set values for the includeResolvedCases and includeCommunications request parameters to control how much information is returned.
Case data is available for 12 months after creation. If a case was created more than 12 months ago, a request for data might cause an error.
The response returns the following in JSON format:
One or more CaseDetails data types.
One or more nextToken values, which specify where to paginate the returned records represented by the CaseDetails objects.
Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.
See the AWS API reference guide for AWS Support's API operation DescribeCases for usage and error information.
Returned Error Codes:
InternalServerError An internal server error occurred.
CaseIdNotFound The requested caseId could not be located.
Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/DescribeCases
Example ¶
package main import ( "fmt" "github.com/aws/aws-sdk-go/aws" "github.com/aws/aws-sdk-go/aws/session" "github.com/aws/aws-sdk-go/service/support" ) func main() { sess, err := session.NewSession() if err != nil { fmt.Println("failed to create session,", err) return } svc := support.New(sess) params := &support.DescribeCasesInput{ AfterTime: aws.String("AfterTime"), BeforeTime: aws.String("BeforeTime"), CaseIdList: []*string{ aws.String("CaseId"), // Required // More values... }, DisplayId: aws.String("DisplayId"), IncludeCommunications: aws.Bool(true), IncludeResolvedCases: aws.Bool(true), Language: aws.String("Language"), MaxResults: aws.Int64(1), NextToken: aws.String("NextToken"), } resp, err := svc.DescribeCases(params) if err != nil { // Print the error, cast err to awserr.Error to get the Code and // Message from an error. fmt.Println(err.Error()) return } // Pretty-print the response data. fmt.Println(resp) }
Output:
func (*Support) DescribeCasesPages ¶
func (c *Support) DescribeCasesPages(input *DescribeCasesInput, fn func(p *DescribeCasesOutput, lastPage bool) (shouldContinue bool)) error
DescribeCasesPages iterates over the pages of a DescribeCases operation, calling the "fn" function with the response data for each page. To stop iterating, return false from the fn function.
See DescribeCases method for more information on how to use this operation.
Note: This operation can generate multiple requests to a service.
// Example iterating over at most 3 pages of a DescribeCases operation. pageNum := 0 err := client.DescribeCasesPages(params, func(page *DescribeCasesOutput, lastPage bool) bool { pageNum++ fmt.Println(page) return pageNum <= 3 })
func (*Support) DescribeCasesRequest ¶
func (c *Support) DescribeCasesRequest(input *DescribeCasesInput) (req *request.Request, output *DescribeCasesOutput)
DescribeCasesRequest generates a "aws/request.Request" representing the client's request for the DescribeCases operation. The "output" return value can be used to capture response data after the request's "Send" method is called.
See DescribeCases for usage and error information.
Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DescribeCases method directly instead.
Note: You must call the "Send" method on the returned request object in order to execute the request.
// Example sending a request using the DescribeCasesRequest method. req, resp := client.DescribeCasesRequest(params) err := req.Send() if err == nil { // resp is now filled fmt.Println(resp) }
Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/DescribeCases
func (*Support) DescribeCommunications ¶
func (c *Support) DescribeCommunications(input *DescribeCommunicationsInput) (*DescribeCommunicationsOutput, error)
DescribeCommunications API operation for AWS Support.
Returns communications (and attachments) for one or more support cases. You can use the afterTime and beforeTime parameters to filter by date. You can use the caseId parameter to restrict the results to a particular case.
Case data is available for 12 months after creation. If a case was created more than 12 months ago, a request for data might cause an error.
You can use the maxResults and nextToken parameters to control the pagination of the result set. Set maxResults to the number of cases you want displayed on each page, and use nextToken to specify the resumption of pagination.
Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.
See the AWS API reference guide for AWS Support's API operation DescribeCommunications for usage and error information.
Returned Error Codes:
InternalServerError An internal server error occurred.
CaseIdNotFound The requested caseId could not be located.
Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/DescribeCommunications
Example ¶
package main import ( "fmt" "github.com/aws/aws-sdk-go/aws" "github.com/aws/aws-sdk-go/aws/session" "github.com/aws/aws-sdk-go/service/support" ) func main() { sess, err := session.NewSession() if err != nil { fmt.Println("failed to create session,", err) return } svc := support.New(sess) params := &support.DescribeCommunicationsInput{ CaseId: aws.String("CaseId"), // Required AfterTime: aws.String("AfterTime"), BeforeTime: aws.String("BeforeTime"), MaxResults: aws.Int64(1), NextToken: aws.String("NextToken"), } resp, err := svc.DescribeCommunications(params) if err != nil { // Print the error, cast err to awserr.Error to get the Code and // Message from an error. fmt.Println(err.Error()) return } // Pretty-print the response data. fmt.Println(resp) }
Output:
func (*Support) DescribeCommunicationsPages ¶
func (c *Support) DescribeCommunicationsPages(input *DescribeCommunicationsInput, fn func(p *DescribeCommunicationsOutput, lastPage bool) (shouldContinue bool)) error
DescribeCommunicationsPages iterates over the pages of a DescribeCommunications operation, calling the "fn" function with the response data for each page. To stop iterating, return false from the fn function.
See DescribeCommunications method for more information on how to use this operation.
Note: This operation can generate multiple requests to a service.
// Example iterating over at most 3 pages of a DescribeCommunications operation. pageNum := 0 err := client.DescribeCommunicationsPages(params, func(page *DescribeCommunicationsOutput, lastPage bool) bool { pageNum++ fmt.Println(page) return pageNum <= 3 })
func (*Support) DescribeCommunicationsRequest ¶
func (c *Support) DescribeCommunicationsRequest(input *DescribeCommunicationsInput) (req *request.Request, output *DescribeCommunicationsOutput)
DescribeCommunicationsRequest generates a "aws/request.Request" representing the client's request for the DescribeCommunications operation. The "output" return value can be used to capture response data after the request's "Send" method is called.
See DescribeCommunications for usage and error information.
Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DescribeCommunications method directly instead.
Note: You must call the "Send" method on the returned request object in order to execute the request.
// Example sending a request using the DescribeCommunicationsRequest method. req, resp := client.DescribeCommunicationsRequest(params) err := req.Send() if err == nil { // resp is now filled fmt.Println(resp) }
Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/DescribeCommunications
func (*Support) DescribeServices ¶
func (c *Support) DescribeServices(input *DescribeServicesInput) (*DescribeServicesOutput, error)
DescribeServices API operation for AWS Support.
Returns the current list of AWS services and a list of service categories that applies to each one. You then use service names and categories in your CreateCase requests. Each AWS service has its own set of categories.
The service codes and category codes correspond to the values that are displayed in the Service and Category drop-down lists on the AWS Support Center Create Case (https://console.aws.amazon.com/support/home#/case/create) page. The values in those fields, however, do not necessarily match the service codes and categories returned by the DescribeServices request. Always use the service codes and categories obtained programmatically. This practice ensures that you always have the most recent set of service and category codes.
Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.
See the AWS API reference guide for AWS Support's API operation DescribeServices for usage and error information.
Returned Error Codes:
- InternalServerError An internal server error occurred.
Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/DescribeServices
Example ¶
package main import ( "fmt" "github.com/aws/aws-sdk-go/aws" "github.com/aws/aws-sdk-go/aws/session" "github.com/aws/aws-sdk-go/service/support" ) func main() { sess, err := session.NewSession() if err != nil { fmt.Println("failed to create session,", err) return } svc := support.New(sess) params := &support.DescribeServicesInput{ Language: aws.String("Language"), ServiceCodeList: []*string{ aws.String("ServiceCode"), // Required // More values... }, } resp, err := svc.DescribeServices(params) if err != nil { // Print the error, cast err to awserr.Error to get the Code and // Message from an error. fmt.Println(err.Error()) return } // Pretty-print the response data. fmt.Println(resp) }
Output:
func (*Support) DescribeServicesRequest ¶
func (c *Support) DescribeServicesRequest(input *DescribeServicesInput) (req *request.Request, output *DescribeServicesOutput)
DescribeServicesRequest generates a "aws/request.Request" representing the client's request for the DescribeServices operation. The "output" return value can be used to capture response data after the request's "Send" method is called.
See DescribeServices for usage and error information.
Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DescribeServices method directly instead.
Note: You must call the "Send" method on the returned request object in order to execute the request.
// Example sending a request using the DescribeServicesRequest method. req, resp := client.DescribeServicesRequest(params) err := req.Send() if err == nil { // resp is now filled fmt.Println(resp) }
Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/DescribeServices
func (*Support) DescribeSeverityLevels ¶
func (c *Support) DescribeSeverityLevels(input *DescribeSeverityLevelsInput) (*DescribeSeverityLevelsOutput, error)
DescribeSeverityLevels API operation for AWS Support.
Returns the list of severity levels that you can assign to an AWS Support case. The severity level for a case is also a field in the CaseDetails data type included in any CreateCase request.
Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.
See the AWS API reference guide for AWS Support's API operation DescribeSeverityLevels for usage and error information.
Returned Error Codes:
- InternalServerError An internal server error occurred.
Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/DescribeSeverityLevels
Example ¶
package main import ( "fmt" "github.com/aws/aws-sdk-go/aws" "github.com/aws/aws-sdk-go/aws/session" "github.com/aws/aws-sdk-go/service/support" ) func main() { sess, err := session.NewSession() if err != nil { fmt.Println("failed to create session,", err) return } svc := support.New(sess) params := &support.DescribeSeverityLevelsInput{ Language: aws.String("Language"), } resp, err := svc.DescribeSeverityLevels(params) if err != nil { // Print the error, cast err to awserr.Error to get the Code and // Message from an error. fmt.Println(err.Error()) return } // Pretty-print the response data. fmt.Println(resp) }
Output:
func (*Support) DescribeSeverityLevelsRequest ¶
func (c *Support) DescribeSeverityLevelsRequest(input *DescribeSeverityLevelsInput) (req *request.Request, output *DescribeSeverityLevelsOutput)
DescribeSeverityLevelsRequest generates a "aws/request.Request" representing the client's request for the DescribeSeverityLevels operation. The "output" return value can be used to capture response data after the request's "Send" method is called.
See DescribeSeverityLevels for usage and error information.
Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DescribeSeverityLevels method directly instead.
Note: You must call the "Send" method on the returned request object in order to execute the request.
// Example sending a request using the DescribeSeverityLevelsRequest method. req, resp := client.DescribeSeverityLevelsRequest(params) err := req.Send() if err == nil { // resp is now filled fmt.Println(resp) }
Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/DescribeSeverityLevels
func (*Support) DescribeTrustedAdvisorCheckRefreshStatuses ¶
func (c *Support) DescribeTrustedAdvisorCheckRefreshStatuses(input *DescribeTrustedAdvisorCheckRefreshStatusesInput) (*DescribeTrustedAdvisorCheckRefreshStatusesOutput, error)
DescribeTrustedAdvisorCheckRefreshStatuses API operation for AWS Support.
Returns the refresh status of the Trusted Advisor checks that have the specified check IDs. Check IDs can be obtained by calling DescribeTrustedAdvisorChecks.
Some checks are refreshed automatically, and their refresh statuses cannot be retrieved by using this operation. Use of the DescribeTrustedAdvisorCheckRefreshStatuses operation for these checks causes an InvalidParameterValue error.
Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.
See the AWS API reference guide for AWS Support's API operation DescribeTrustedAdvisorCheckRefreshStatuses for usage and error information.
Returned Error Codes:
- InternalServerError An internal server error occurred.
Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/DescribeTrustedAdvisorCheckRefreshStatuses
Example ¶
package main import ( "fmt" "github.com/aws/aws-sdk-go/aws" "github.com/aws/aws-sdk-go/aws/session" "github.com/aws/aws-sdk-go/service/support" ) func main() { sess, err := session.NewSession() if err != nil { fmt.Println("failed to create session,", err) return } svc := support.New(sess) params := &support.DescribeTrustedAdvisorCheckRefreshStatusesInput{ CheckIds: []*string{ // Required aws.String("String"), // Required // More values... }, } resp, err := svc.DescribeTrustedAdvisorCheckRefreshStatuses(params) if err != nil { // Print the error, cast err to awserr.Error to get the Code and // Message from an error. fmt.Println(err.Error()) return } // Pretty-print the response data. fmt.Println(resp) }
Output:
func (*Support) DescribeTrustedAdvisorCheckRefreshStatusesRequest ¶
func (c *Support) DescribeTrustedAdvisorCheckRefreshStatusesRequest(input *DescribeTrustedAdvisorCheckRefreshStatusesInput) (req *request.Request, output *DescribeTrustedAdvisorCheckRefreshStatusesOutput)
DescribeTrustedAdvisorCheckRefreshStatusesRequest generates a "aws/request.Request" representing the client's request for the DescribeTrustedAdvisorCheckRefreshStatuses operation. The "output" return value can be used to capture response data after the request's "Send" method is called.
See DescribeTrustedAdvisorCheckRefreshStatuses for usage and error information.
Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DescribeTrustedAdvisorCheckRefreshStatuses method directly instead.
Note: You must call the "Send" method on the returned request object in order to execute the request.
// Example sending a request using the DescribeTrustedAdvisorCheckRefreshStatusesRequest method. req, resp := client.DescribeTrustedAdvisorCheckRefreshStatusesRequest(params) err := req.Send() if err == nil { // resp is now filled fmt.Println(resp) }
Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/DescribeTrustedAdvisorCheckRefreshStatuses
func (*Support) DescribeTrustedAdvisorCheckResult ¶
func (c *Support) DescribeTrustedAdvisorCheckResult(input *DescribeTrustedAdvisorCheckResultInput) (*DescribeTrustedAdvisorCheckResultOutput, error)
DescribeTrustedAdvisorCheckResult API operation for AWS Support.
Returns the results of the Trusted Advisor check that has the specified check ID. Check IDs can be obtained by calling DescribeTrustedAdvisorChecks.
The response contains a TrustedAdvisorCheckResult object, which contains these three objects:
TrustedAdvisorCategorySpecificSummary
TrustedAdvisorResourceDetail
TrustedAdvisorResourcesSummary
In addition, the response contains these fields:
status. The alert status of the check: "ok" (green), "warning" (yellow), "error" (red), or "not_available".
timestamp. The time of the last refresh of the check.
checkId. The unique identifier for the check.
Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.
See the AWS API reference guide for AWS Support's API operation DescribeTrustedAdvisorCheckResult for usage and error information.
Returned Error Codes:
- InternalServerError An internal server error occurred.
Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/DescribeTrustedAdvisorCheckResult
Example ¶
package main import ( "fmt" "github.com/aws/aws-sdk-go/aws" "github.com/aws/aws-sdk-go/aws/session" "github.com/aws/aws-sdk-go/service/support" ) func main() { sess, err := session.NewSession() if err != nil { fmt.Println("failed to create session,", err) return } svc := support.New(sess) params := &support.DescribeTrustedAdvisorCheckResultInput{ CheckId: aws.String("String"), // Required Language: aws.String("String"), } resp, err := svc.DescribeTrustedAdvisorCheckResult(params) if err != nil { // Print the error, cast err to awserr.Error to get the Code and // Message from an error. fmt.Println(err.Error()) return } // Pretty-print the response data. fmt.Println(resp) }
Output:
func (*Support) DescribeTrustedAdvisorCheckResultRequest ¶
func (c *Support) DescribeTrustedAdvisorCheckResultRequest(input *DescribeTrustedAdvisorCheckResultInput) (req *request.Request, output *DescribeTrustedAdvisorCheckResultOutput)
DescribeTrustedAdvisorCheckResultRequest generates a "aws/request.Request" representing the client's request for the DescribeTrustedAdvisorCheckResult operation. The "output" return value can be used to capture response data after the request's "Send" method is called.
See DescribeTrustedAdvisorCheckResult for usage and error information.
Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DescribeTrustedAdvisorCheckResult method directly instead.
Note: You must call the "Send" method on the returned request object in order to execute the request.
// Example sending a request using the DescribeTrustedAdvisorCheckResultRequest method. req, resp := client.DescribeTrustedAdvisorCheckResultRequest(params) err := req.Send() if err == nil { // resp is now filled fmt.Println(resp) }
Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/DescribeTrustedAdvisorCheckResult
func (*Support) DescribeTrustedAdvisorCheckSummaries ¶
func (c *Support) DescribeTrustedAdvisorCheckSummaries(input *DescribeTrustedAdvisorCheckSummariesInput) (*DescribeTrustedAdvisorCheckSummariesOutput, error)
DescribeTrustedAdvisorCheckSummaries API operation for AWS Support.
Returns the summaries of the results of the Trusted Advisor checks that have the specified check IDs. Check IDs can be obtained by calling DescribeTrustedAdvisorChecks.
The response contains an array of TrustedAdvisorCheckSummary objects.
Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.
See the AWS API reference guide for AWS Support's API operation DescribeTrustedAdvisorCheckSummaries for usage and error information.
Returned Error Codes:
- InternalServerError An internal server error occurred.
Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/DescribeTrustedAdvisorCheckSummaries
Example ¶
package main import ( "fmt" "github.com/aws/aws-sdk-go/aws" "github.com/aws/aws-sdk-go/aws/session" "github.com/aws/aws-sdk-go/service/support" ) func main() { sess, err := session.NewSession() if err != nil { fmt.Println("failed to create session,", err) return } svc := support.New(sess) params := &support.DescribeTrustedAdvisorCheckSummariesInput{ CheckIds: []*string{ // Required aws.String("String"), // Required // More values... }, } resp, err := svc.DescribeTrustedAdvisorCheckSummaries(params) if err != nil { // Print the error, cast err to awserr.Error to get the Code and // Message from an error. fmt.Println(err.Error()) return } // Pretty-print the response data. fmt.Println(resp) }
Output:
func (*Support) DescribeTrustedAdvisorCheckSummariesRequest ¶
func (c *Support) DescribeTrustedAdvisorCheckSummariesRequest(input *DescribeTrustedAdvisorCheckSummariesInput) (req *request.Request, output *DescribeTrustedAdvisorCheckSummariesOutput)
DescribeTrustedAdvisorCheckSummariesRequest generates a "aws/request.Request" representing the client's request for the DescribeTrustedAdvisorCheckSummaries operation. The "output" return value can be used to capture response data after the request's "Send" method is called.
See DescribeTrustedAdvisorCheckSummaries for usage and error information.
Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DescribeTrustedAdvisorCheckSummaries method directly instead.
Note: You must call the "Send" method on the returned request object in order to execute the request.
// Example sending a request using the DescribeTrustedAdvisorCheckSummariesRequest method. req, resp := client.DescribeTrustedAdvisorCheckSummariesRequest(params) err := req.Send() if err == nil { // resp is now filled fmt.Println(resp) }
Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/DescribeTrustedAdvisorCheckSummaries
func (*Support) DescribeTrustedAdvisorChecks ¶
func (c *Support) DescribeTrustedAdvisorChecks(input *DescribeTrustedAdvisorChecksInput) (*DescribeTrustedAdvisorChecksOutput, error)
DescribeTrustedAdvisorChecks API operation for AWS Support.
Returns information about all available Trusted Advisor checks, including name, ID, category, description, and metadata. You must specify a language code; English ("en") and Japanese ("ja") are currently supported. The response contains a TrustedAdvisorCheckDescription for each check.
Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.
See the AWS API reference guide for AWS Support's API operation DescribeTrustedAdvisorChecks for usage and error information.
Returned Error Codes:
- InternalServerError An internal server error occurred.
Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/DescribeTrustedAdvisorChecks
Example ¶
package main import ( "fmt" "github.com/aws/aws-sdk-go/aws" "github.com/aws/aws-sdk-go/aws/session" "github.com/aws/aws-sdk-go/service/support" ) func main() { sess, err := session.NewSession() if err != nil { fmt.Println("failed to create session,", err) return } svc := support.New(sess) params := &support.DescribeTrustedAdvisorChecksInput{ Language: aws.String("String"), // Required } resp, err := svc.DescribeTrustedAdvisorChecks(params) if err != nil { // Print the error, cast err to awserr.Error to get the Code and // Message from an error. fmt.Println(err.Error()) return } // Pretty-print the response data. fmt.Println(resp) }
Output:
func (*Support) DescribeTrustedAdvisorChecksRequest ¶
func (c *Support) DescribeTrustedAdvisorChecksRequest(input *DescribeTrustedAdvisorChecksInput) (req *request.Request, output *DescribeTrustedAdvisorChecksOutput)
DescribeTrustedAdvisorChecksRequest generates a "aws/request.Request" representing the client's request for the DescribeTrustedAdvisorChecks operation. The "output" return value can be used to capture response data after the request's "Send" method is called.
See DescribeTrustedAdvisorChecks for usage and error information.
Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DescribeTrustedAdvisorChecks method directly instead.
Note: You must call the "Send" method on the returned request object in order to execute the request.
// Example sending a request using the DescribeTrustedAdvisorChecksRequest method. req, resp := client.DescribeTrustedAdvisorChecksRequest(params) err := req.Send() if err == nil { // resp is now filled fmt.Println(resp) }
Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/DescribeTrustedAdvisorChecks
func (*Support) RefreshTrustedAdvisorCheck ¶
func (c *Support) RefreshTrustedAdvisorCheck(input *RefreshTrustedAdvisorCheckInput) (*RefreshTrustedAdvisorCheckOutput, error)
RefreshTrustedAdvisorCheck API operation for AWS Support.
Requests a refresh of the Trusted Advisor check that has the specified check ID. Check IDs can be obtained by calling DescribeTrustedAdvisorChecks.
Some checks are refreshed automatically, and they cannot be refreshed by using this operation. Use of the RefreshTrustedAdvisorCheck operation for these checks causes an InvalidParameterValue error.
The response contains a TrustedAdvisorCheckRefreshStatus object, which contains these fields:
status. The refresh status of the check: "none", "enqueued", "processing", "success", or "abandoned".
millisUntilNextRefreshable. The amount of time, in milliseconds, until the check is eligible for refresh.
checkId. The unique identifier for the check.
Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.
See the AWS API reference guide for AWS Support's API operation RefreshTrustedAdvisorCheck for usage and error information.
Returned Error Codes:
- InternalServerError An internal server error occurred.
Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/RefreshTrustedAdvisorCheck
Example ¶
package main import ( "fmt" "github.com/aws/aws-sdk-go/aws" "github.com/aws/aws-sdk-go/aws/session" "github.com/aws/aws-sdk-go/service/support" ) func main() { sess, err := session.NewSession() if err != nil { fmt.Println("failed to create session,", err) return } svc := support.New(sess) params := &support.RefreshTrustedAdvisorCheckInput{ CheckId: aws.String("String"), // Required } resp, err := svc.RefreshTrustedAdvisorCheck(params) if err != nil { // Print the error, cast err to awserr.Error to get the Code and // Message from an error. fmt.Println(err.Error()) return } // Pretty-print the response data. fmt.Println(resp) }
Output:
func (*Support) RefreshTrustedAdvisorCheckRequest ¶
func (c *Support) RefreshTrustedAdvisorCheckRequest(input *RefreshTrustedAdvisorCheckInput) (req *request.Request, output *RefreshTrustedAdvisorCheckOutput)
RefreshTrustedAdvisorCheckRequest generates a "aws/request.Request" representing the client's request for the RefreshTrustedAdvisorCheck operation. The "output" return value can be used to capture response data after the request's "Send" method is called.
See RefreshTrustedAdvisorCheck for usage and error information.
Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the RefreshTrustedAdvisorCheck method directly instead.
Note: You must call the "Send" method on the returned request object in order to execute the request.
// Example sending a request using the RefreshTrustedAdvisorCheckRequest method. req, resp := client.RefreshTrustedAdvisorCheckRequest(params) err := req.Send() if err == nil { // resp is now filled fmt.Println(resp) }
Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/RefreshTrustedAdvisorCheck
func (*Support) ResolveCase ¶
func (c *Support) ResolveCase(input *ResolveCaseInput) (*ResolveCaseOutput, error)
ResolveCase API operation for AWS Support.
Takes a caseId and returns the initial state of the case along with the state of the case after the call to ResolveCase completed.
Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.
See the AWS API reference guide for AWS Support's API operation ResolveCase for usage and error information.
Returned Error Codes:
InternalServerError An internal server error occurred.
CaseIdNotFound The requested caseId could not be located.
Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/ResolveCase
Example ¶
package main import ( "fmt" "github.com/aws/aws-sdk-go/aws" "github.com/aws/aws-sdk-go/aws/session" "github.com/aws/aws-sdk-go/service/support" ) func main() { sess, err := session.NewSession() if err != nil { fmt.Println("failed to create session,", err) return } svc := support.New(sess) params := &support.ResolveCaseInput{ CaseId: aws.String("CaseId"), } resp, err := svc.ResolveCase(params) if err != nil { // Print the error, cast err to awserr.Error to get the Code and // Message from an error. fmt.Println(err.Error()) return } // Pretty-print the response data. fmt.Println(resp) }
Output:
func (*Support) ResolveCaseRequest ¶
func (c *Support) ResolveCaseRequest(input *ResolveCaseInput) (req *request.Request, output *ResolveCaseOutput)
ResolveCaseRequest generates a "aws/request.Request" representing the client's request for the ResolveCase operation. The "output" return value can be used to capture response data after the request's "Send" method is called.
See ResolveCase for usage and error information.
Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the ResolveCase method directly instead.
Note: You must call the "Send" method on the returned request object in order to execute the request.
// Example sending a request using the ResolveCaseRequest method. req, resp := client.ResolveCaseRequest(params) err := req.Send() if err == nil { // resp is now filled fmt.Println(resp) }
Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/ResolveCase
type TrustedAdvisorCategorySpecificSummary ¶
type TrustedAdvisorCategorySpecificSummary struct { // The summary information about cost savings for a Trusted Advisor check that // is in the Cost Optimizing category. CostOptimizing *TrustedAdvisorCostOptimizingSummary `locationName:"costOptimizing" type:"structure"` // contains filtered or unexported fields }
The container for summary information that relates to the category of the Trusted Advisor check. Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/TrustedAdvisorCategorySpecificSummary
func (TrustedAdvisorCategorySpecificSummary) GoString ¶
func (s TrustedAdvisorCategorySpecificSummary) GoString() string
GoString returns the string representation
func (*TrustedAdvisorCategorySpecificSummary) SetCostOptimizing ¶
func (s *TrustedAdvisorCategorySpecificSummary) SetCostOptimizing(v *TrustedAdvisorCostOptimizingSummary) *TrustedAdvisorCategorySpecificSummary
SetCostOptimizing sets the CostOptimizing field's value.
func (TrustedAdvisorCategorySpecificSummary) String ¶
func (s TrustedAdvisorCategorySpecificSummary) String() string
String returns the string representation
type TrustedAdvisorCheckDescription ¶
type TrustedAdvisorCheckDescription struct { // The category of the Trusted Advisor check. // // Category is a required field Category *string `locationName:"category" type:"string" required:"true"` // The description of the Trusted Advisor check, which includes the alert criteria // and recommended actions (contains HTML markup). // // Description is a required field Description *string `locationName:"description" type:"string" required:"true"` // The unique identifier for the Trusted Advisor check. // // Id is a required field Id *string `locationName:"id" type:"string" required:"true"` // The column headings for the data returned by the Trusted Advisor check. The // order of the headings corresponds to the order of the data in the Metadata // element of the TrustedAdvisorResourceDetail for the check. Metadata contains // all the data that is shown in the Excel download, even in those cases where // the UI shows just summary data. // // Metadata is a required field Metadata []*string `locationName:"metadata" type:"list" required:"true"` // The display name for the Trusted Advisor check. // // Name is a required field Name *string `locationName:"name" type:"string" required:"true"` // contains filtered or unexported fields }
The description and metadata for a Trusted Advisor check. Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/TrustedAdvisorCheckDescription
func (TrustedAdvisorCheckDescription) GoString ¶
func (s TrustedAdvisorCheckDescription) GoString() string
GoString returns the string representation
func (*TrustedAdvisorCheckDescription) SetCategory ¶
func (s *TrustedAdvisorCheckDescription) SetCategory(v string) *TrustedAdvisorCheckDescription
SetCategory sets the Category field's value.
func (*TrustedAdvisorCheckDescription) SetDescription ¶
func (s *TrustedAdvisorCheckDescription) SetDescription(v string) *TrustedAdvisorCheckDescription
SetDescription sets the Description field's value.
func (*TrustedAdvisorCheckDescription) SetId ¶
func (s *TrustedAdvisorCheckDescription) SetId(v string) *TrustedAdvisorCheckDescription
SetId sets the Id field's value.
func (*TrustedAdvisorCheckDescription) SetMetadata ¶
func (s *TrustedAdvisorCheckDescription) SetMetadata(v []*string) *TrustedAdvisorCheckDescription
SetMetadata sets the Metadata field's value.
func (*TrustedAdvisorCheckDescription) SetName ¶
func (s *TrustedAdvisorCheckDescription) SetName(v string) *TrustedAdvisorCheckDescription
SetName sets the Name field's value.
func (TrustedAdvisorCheckDescription) String ¶
func (s TrustedAdvisorCheckDescription) String() string
String returns the string representation
type TrustedAdvisorCheckRefreshStatus ¶
type TrustedAdvisorCheckRefreshStatus struct { // The unique identifier for the Trusted Advisor check. // // CheckId is a required field CheckId *string `locationName:"checkId" type:"string" required:"true"` // The amount of time, in milliseconds, until the Trusted Advisor check is eligible // for refresh. // // MillisUntilNextRefreshable is a required field MillisUntilNextRefreshable *int64 `locationName:"millisUntilNextRefreshable" type:"long" required:"true"` // The status of the Trusted Advisor check for which a refresh has been requested: // "none", "enqueued", "processing", "success", or "abandoned". // // Status is a required field Status *string `locationName:"status" type:"string" required:"true"` // contains filtered or unexported fields }
The refresh status of a Trusted Advisor check. Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/TrustedAdvisorCheckRefreshStatus
func (TrustedAdvisorCheckRefreshStatus) GoString ¶
func (s TrustedAdvisorCheckRefreshStatus) GoString() string
GoString returns the string representation
func (*TrustedAdvisorCheckRefreshStatus) SetCheckId ¶
func (s *TrustedAdvisorCheckRefreshStatus) SetCheckId(v string) *TrustedAdvisorCheckRefreshStatus
SetCheckId sets the CheckId field's value.
func (*TrustedAdvisorCheckRefreshStatus) SetMillisUntilNextRefreshable ¶
func (s *TrustedAdvisorCheckRefreshStatus) SetMillisUntilNextRefreshable(v int64) *TrustedAdvisorCheckRefreshStatus
SetMillisUntilNextRefreshable sets the MillisUntilNextRefreshable field's value.
func (*TrustedAdvisorCheckRefreshStatus) SetStatus ¶
func (s *TrustedAdvisorCheckRefreshStatus) SetStatus(v string) *TrustedAdvisorCheckRefreshStatus
SetStatus sets the Status field's value.
func (TrustedAdvisorCheckRefreshStatus) String ¶
func (s TrustedAdvisorCheckRefreshStatus) String() string
String returns the string representation
type TrustedAdvisorCheckResult ¶
type TrustedAdvisorCheckResult struct { // Summary information that relates to the category of the check. Cost Optimizing // is the only category that is currently supported. // // CategorySpecificSummary is a required field CategorySpecificSummary *TrustedAdvisorCategorySpecificSummary `locationName:"categorySpecificSummary" type:"structure" required:"true"` // The unique identifier for the Trusted Advisor check. // // CheckId is a required field CheckId *string `locationName:"checkId" type:"string" required:"true"` // The details about each resource listed in the check result. // // FlaggedResources is a required field FlaggedResources []*TrustedAdvisorResourceDetail `locationName:"flaggedResources" type:"list" required:"true"` // Details about AWS resources that were analyzed in a call to Trusted Advisor // DescribeTrustedAdvisorCheckSummaries. // // ResourcesSummary is a required field ResourcesSummary *TrustedAdvisorResourcesSummary `locationName:"resourcesSummary" type:"structure" required:"true"` // The alert status of the check: "ok" (green), "warning" (yellow), "error" // (red), or "not_available". // // Status is a required field Status *string `locationName:"status" type:"string" required:"true"` // The time of the last refresh of the check. // // Timestamp is a required field Timestamp *string `locationName:"timestamp" type:"string" required:"true"` // contains filtered or unexported fields }
The results of a Trusted Advisor check returned by DescribeTrustedAdvisorCheckResult. Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/TrustedAdvisorCheckResult
func (TrustedAdvisorCheckResult) GoString ¶
func (s TrustedAdvisorCheckResult) GoString() string
GoString returns the string representation
func (*TrustedAdvisorCheckResult) SetCategorySpecificSummary ¶
func (s *TrustedAdvisorCheckResult) SetCategorySpecificSummary(v *TrustedAdvisorCategorySpecificSummary) *TrustedAdvisorCheckResult
SetCategorySpecificSummary sets the CategorySpecificSummary field's value.
func (*TrustedAdvisorCheckResult) SetCheckId ¶
func (s *TrustedAdvisorCheckResult) SetCheckId(v string) *TrustedAdvisorCheckResult
SetCheckId sets the CheckId field's value.
func (*TrustedAdvisorCheckResult) SetFlaggedResources ¶
func (s *TrustedAdvisorCheckResult) SetFlaggedResources(v []*TrustedAdvisorResourceDetail) *TrustedAdvisorCheckResult
SetFlaggedResources sets the FlaggedResources field's value.
func (*TrustedAdvisorCheckResult) SetResourcesSummary ¶
func (s *TrustedAdvisorCheckResult) SetResourcesSummary(v *TrustedAdvisorResourcesSummary) *TrustedAdvisorCheckResult
SetResourcesSummary sets the ResourcesSummary field's value.
func (*TrustedAdvisorCheckResult) SetStatus ¶
func (s *TrustedAdvisorCheckResult) SetStatus(v string) *TrustedAdvisorCheckResult
SetStatus sets the Status field's value.
func (*TrustedAdvisorCheckResult) SetTimestamp ¶
func (s *TrustedAdvisorCheckResult) SetTimestamp(v string) *TrustedAdvisorCheckResult
SetTimestamp sets the Timestamp field's value.
func (TrustedAdvisorCheckResult) String ¶
func (s TrustedAdvisorCheckResult) String() string
String returns the string representation
type TrustedAdvisorCheckSummary ¶
type TrustedAdvisorCheckSummary struct { // Summary information that relates to the category of the check. Cost Optimizing // is the only category that is currently supported. // // CategorySpecificSummary is a required field CategorySpecificSummary *TrustedAdvisorCategorySpecificSummary `locationName:"categorySpecificSummary" type:"structure" required:"true"` // The unique identifier for the Trusted Advisor check. // // CheckId is a required field CheckId *string `locationName:"checkId" type:"string" required:"true"` // Specifies whether the Trusted Advisor check has flagged resources. HasFlaggedResources *bool `locationName:"hasFlaggedResources" type:"boolean"` // Details about AWS resources that were analyzed in a call to Trusted Advisor // DescribeTrustedAdvisorCheckSummaries. // // ResourcesSummary is a required field ResourcesSummary *TrustedAdvisorResourcesSummary `locationName:"resourcesSummary" type:"structure" required:"true"` // The alert status of the check: "ok" (green), "warning" (yellow), "error" // (red), or "not_available". // // Status is a required field Status *string `locationName:"status" type:"string" required:"true"` // The time of the last refresh of the check. // // Timestamp is a required field Timestamp *string `locationName:"timestamp" type:"string" required:"true"` // contains filtered or unexported fields }
A summary of a Trusted Advisor check result, including the alert status, last refresh, and number of resources examined. Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/TrustedAdvisorCheckSummary
func (TrustedAdvisorCheckSummary) GoString ¶
func (s TrustedAdvisorCheckSummary) GoString() string
GoString returns the string representation
func (*TrustedAdvisorCheckSummary) SetCategorySpecificSummary ¶
func (s *TrustedAdvisorCheckSummary) SetCategorySpecificSummary(v *TrustedAdvisorCategorySpecificSummary) *TrustedAdvisorCheckSummary
SetCategorySpecificSummary sets the CategorySpecificSummary field's value.
func (*TrustedAdvisorCheckSummary) SetCheckId ¶
func (s *TrustedAdvisorCheckSummary) SetCheckId(v string) *TrustedAdvisorCheckSummary
SetCheckId sets the CheckId field's value.
func (*TrustedAdvisorCheckSummary) SetHasFlaggedResources ¶
func (s *TrustedAdvisorCheckSummary) SetHasFlaggedResources(v bool) *TrustedAdvisorCheckSummary
SetHasFlaggedResources sets the HasFlaggedResources field's value.
func (*TrustedAdvisorCheckSummary) SetResourcesSummary ¶
func (s *TrustedAdvisorCheckSummary) SetResourcesSummary(v *TrustedAdvisorResourcesSummary) *TrustedAdvisorCheckSummary
SetResourcesSummary sets the ResourcesSummary field's value.
func (*TrustedAdvisorCheckSummary) SetStatus ¶
func (s *TrustedAdvisorCheckSummary) SetStatus(v string) *TrustedAdvisorCheckSummary
SetStatus sets the Status field's value.
func (*TrustedAdvisorCheckSummary) SetTimestamp ¶
func (s *TrustedAdvisorCheckSummary) SetTimestamp(v string) *TrustedAdvisorCheckSummary
SetTimestamp sets the Timestamp field's value.
func (TrustedAdvisorCheckSummary) String ¶
func (s TrustedAdvisorCheckSummary) String() string
String returns the string representation
type TrustedAdvisorCostOptimizingSummary ¶
type TrustedAdvisorCostOptimizingSummary struct { // The estimated monthly savings that might be realized if the recommended actions // are taken. // // EstimatedMonthlySavings is a required field EstimatedMonthlySavings *float64 `locationName:"estimatedMonthlySavings" type:"double" required:"true"` // The estimated percentage of savings that might be realized if the recommended // actions are taken. // // EstimatedPercentMonthlySavings is a required field EstimatedPercentMonthlySavings *float64 `locationName:"estimatedPercentMonthlySavings" type:"double" required:"true"` // contains filtered or unexported fields }
The estimated cost savings that might be realized if the recommended actions are taken. Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/TrustedAdvisorCostOptimizingSummary
func (TrustedAdvisorCostOptimizingSummary) GoString ¶
func (s TrustedAdvisorCostOptimizingSummary) GoString() string
GoString returns the string representation
func (*TrustedAdvisorCostOptimizingSummary) SetEstimatedMonthlySavings ¶
func (s *TrustedAdvisorCostOptimizingSummary) SetEstimatedMonthlySavings(v float64) *TrustedAdvisorCostOptimizingSummary
SetEstimatedMonthlySavings sets the EstimatedMonthlySavings field's value.
func (*TrustedAdvisorCostOptimizingSummary) SetEstimatedPercentMonthlySavings ¶
func (s *TrustedAdvisorCostOptimizingSummary) SetEstimatedPercentMonthlySavings(v float64) *TrustedAdvisorCostOptimizingSummary
SetEstimatedPercentMonthlySavings sets the EstimatedPercentMonthlySavings field's value.
func (TrustedAdvisorCostOptimizingSummary) String ¶
func (s TrustedAdvisorCostOptimizingSummary) String() string
String returns the string representation
type TrustedAdvisorResourceDetail ¶
type TrustedAdvisorResourceDetail struct { // Specifies whether the AWS resource was ignored by Trusted Advisor because // it was marked as suppressed by the user. IsSuppressed *bool `locationName:"isSuppressed" type:"boolean"` // Additional information about the identified resource. The exact metadata // and its order can be obtained by inspecting the TrustedAdvisorCheckDescription // object returned by the call to DescribeTrustedAdvisorChecks. Metadata contains // all the data that is shown in the Excel download, even in those cases where // the UI shows just summary data. // // Metadata is a required field Metadata []*string `locationName:"metadata" type:"list" required:"true"` // The AWS region in which the identified resource is located. Region *string `locationName:"region" type:"string"` // The unique identifier for the identified resource. // // ResourceId is a required field ResourceId *string `locationName:"resourceId" type:"string" required:"true"` // The status code for the resource identified in the Trusted Advisor check. // // Status is a required field Status *string `locationName:"status" type:"string" required:"true"` // contains filtered or unexported fields }
Contains information about a resource identified by a Trusted Advisor check. Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/TrustedAdvisorResourceDetail
func (TrustedAdvisorResourceDetail) GoString ¶
func (s TrustedAdvisorResourceDetail) GoString() string
GoString returns the string representation
func (*TrustedAdvisorResourceDetail) SetIsSuppressed ¶
func (s *TrustedAdvisorResourceDetail) SetIsSuppressed(v bool) *TrustedAdvisorResourceDetail
SetIsSuppressed sets the IsSuppressed field's value.
func (*TrustedAdvisorResourceDetail) SetMetadata ¶
func (s *TrustedAdvisorResourceDetail) SetMetadata(v []*string) *TrustedAdvisorResourceDetail
SetMetadata sets the Metadata field's value.
func (*TrustedAdvisorResourceDetail) SetRegion ¶
func (s *TrustedAdvisorResourceDetail) SetRegion(v string) *TrustedAdvisorResourceDetail
SetRegion sets the Region field's value.
func (*TrustedAdvisorResourceDetail) SetResourceId ¶
func (s *TrustedAdvisorResourceDetail) SetResourceId(v string) *TrustedAdvisorResourceDetail
SetResourceId sets the ResourceId field's value.
func (*TrustedAdvisorResourceDetail) SetStatus ¶
func (s *TrustedAdvisorResourceDetail) SetStatus(v string) *TrustedAdvisorResourceDetail
SetStatus sets the Status field's value.
func (TrustedAdvisorResourceDetail) String ¶
func (s TrustedAdvisorResourceDetail) String() string
String returns the string representation
type TrustedAdvisorResourcesSummary ¶
type TrustedAdvisorResourcesSummary struct { // The number of AWS resources that were flagged (listed) by the Trusted Advisor // check. // // ResourcesFlagged is a required field ResourcesFlagged *int64 `locationName:"resourcesFlagged" type:"long" required:"true"` // The number of AWS resources ignored by Trusted Advisor because information // was unavailable. // // ResourcesIgnored is a required field ResourcesIgnored *int64 `locationName:"resourcesIgnored" type:"long" required:"true"` // The number of AWS resources that were analyzed by the Trusted Advisor check. // // ResourcesProcessed is a required field ResourcesProcessed *int64 `locationName:"resourcesProcessed" type:"long" required:"true"` // The number of AWS resources ignored by Trusted Advisor because they were // marked as suppressed by the user. // // ResourcesSuppressed is a required field ResourcesSuppressed *int64 `locationName:"resourcesSuppressed" type:"long" required:"true"` // contains filtered or unexported fields }
Details about AWS resources that were analyzed in a call to Trusted Advisor DescribeTrustedAdvisorCheckSummaries. Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/TrustedAdvisorResourcesSummary
func (TrustedAdvisorResourcesSummary) GoString ¶
func (s TrustedAdvisorResourcesSummary) GoString() string
GoString returns the string representation
func (*TrustedAdvisorResourcesSummary) SetResourcesFlagged ¶
func (s *TrustedAdvisorResourcesSummary) SetResourcesFlagged(v int64) *TrustedAdvisorResourcesSummary
SetResourcesFlagged sets the ResourcesFlagged field's value.
func (*TrustedAdvisorResourcesSummary) SetResourcesIgnored ¶
func (s *TrustedAdvisorResourcesSummary) SetResourcesIgnored(v int64) *TrustedAdvisorResourcesSummary
SetResourcesIgnored sets the ResourcesIgnored field's value.
func (*TrustedAdvisorResourcesSummary) SetResourcesProcessed ¶
func (s *TrustedAdvisorResourcesSummary) SetResourcesProcessed(v int64) *TrustedAdvisorResourcesSummary
SetResourcesProcessed sets the ResourcesProcessed field's value.
func (*TrustedAdvisorResourcesSummary) SetResourcesSuppressed ¶
func (s *TrustedAdvisorResourcesSummary) SetResourcesSuppressed(v int64) *TrustedAdvisorResourcesSummary
SetResourcesSuppressed sets the ResourcesSuppressed field's value.
func (TrustedAdvisorResourcesSummary) String ¶
func (s TrustedAdvisorResourcesSummary) String() string
String returns the string representation
Directories
¶
Path | Synopsis |
---|---|
Package supportiface provides an interface to enable mocking the AWS Support service client for testing your code.
|
Package supportiface provides an interface to enable mocking the AWS Support service client for testing your code. |