vpp

package

v1.8.0-alpha Latest Latest Go to latest Published: Oct 4, 2018 License: Apache-2.0 Imports: 46 Imported by: 0

Details

Valid go.mod file

The Go module system was introduced in Go 1.11 and is the official dependency management solution for Go.
Redistributable license

Redistributable licenses place minimal restrictions on how software can be used, modified, and redistributed.
Tagged version

Modules with tagged versions give importers more predictable builds.
Stable version

When a project reaches major version v1 it is considered stable.
Learn more about best practices

Repository

README ¶

VPP plugins

VPP plugins manage basic configuration of the VPP. The management of configuration is split among multiple packages. Detailed description can be found in particular READMEs:

Config file

The default plugins can use configuration file vpp.conf to:

set global maximum transmission unit
set VPP resync strategy
to enable/disable status publishers

To run the vpp-agent with vpp.conf:

vpp-agent --vpp-plugin-config=/opt/vpp-agent/dev/vpp.conf

MTU

If there is an interface without MTU set, the value from configuration file will be used. MTU is written in config as follows:

mtu: <value>

Resync Strategy

There are two strategies available for VPP resync:

full always performs the full resync of all VPP plugins. This is the default strategy.
optimize-cold-start evaluates the existing configuration in the VPP at first. The state of interfaces is the decision-maker: if there is any interface configured except local0, the resync is performed normally. Otherwise it is skipped.
IMPORTANT NOTE: Use it carefully because the state of the ETCD is not taken into consideration .

Strategy can be set in vpp.conf:

strategy: full or strategy: optimize

To skip resync completely, start vpp-agent with --skip-vpp-resync parameter. In such a case the resync is skipped completly (config file resync strategy is not taken into account).

Status Publishers

Status Publishers define list of data syncs to which status is published.

status-publishers: [<datasync>, <datasync2>, ...]

Currently supported data syncs for publishing state: etcd and redis.

Documentation ¶

Overview ¶

Package vpp is the parent package for all "default" VPP-related plugins.

Constants ¶

This section is empty.

Variables ¶

This section is empty.

Functions ¶

This section is empty.

Types ¶

type API ¶

type API interface {

	// DisableResync for one or more VPP plugins. Use in Init() phase.
	DisableResync(keyPrefix ...string)

	// GetSwIfIndexes gives access to mapping of logical names (used in ETCD configuration) to sw_if_index.
	// This mapping is helpful if other plugins need to configure VPP by the Binary API that uses sw_if_index input.
	//
	// Example of is_sw_index lookup by logical name of the port "vswitch_ingres" of the network interface:
	//
	//   func Init() error {
	//      swIfIndexes := vppplugin.GetSwIfIndexes()
	//      swIfIndexes.LookupByName("vswitch_ingres")
	//
	GetSwIfIndexes() ifaceidx.SwIfIndex

	// GetSwIfIndexes gives access to mapping of logical names (used in ETCD configuration) to dhcp_index.
	// This mapping is helpful if other plugins need to know about the DHCP configuration given to interface.
	GetDHCPIndices() ifaceidx.DhcpIndex

	// GetBfdSessionIndexes gives access to mapping of logical names (used in ETCD configuration) to bfd_session_indexes.
	// The mapping consists of the interface (its name), generated index and the BFDSessionMeta with an authentication key
	// used for the particular session.
	GetBfdSessionIndexes() idxvpp.NameToIdx

	// GetBfdAuthKeyIndexes gives access to mapping of logical names (used in ETCD configuration) to bfd_auth_keys.
	// The authentication key has its own unique ID - the value is as a string stored in the mapping. Unique index is generated
	// uint32 number.
	GetBfdAuthKeyIndexes() idxvpp.NameToIdx

	// GetBfdEchoFunctionIndexes gives access to mapping of logical names (used in ETCD configuration) to bfd_echo_function
	// The echo function uses the interface name as an unique ID - this value is as a string stored in the mapping. The index
	// is generated uint32 number.
	GetBfdEchoFunctionIndexes() idxvpp.NameToIdx

	// GetBDIndexes gives access to mapping of logical names (used in ETCD configuration) as bd_indexes. The mapping consists
	// from the unique Bridge domain name and the bridge domain ID.
	GetBDIndexes() l2idx.BDIndex

	// GetFIBIndexes gives access to mapping of logical names (used in ETCD configuration) as fib_indexes. The FIB's physical
	// address is the name in the mapping. The key is generated. The FIB mapping also contains a metadata, FIBMeta with various
	// info about the Interface/Bridge domain where this fib belongs to:
	// - InterfaceName
	// - Bridge domain name
	// - BVI (bool flag for interface)
	// - Static config
	GetFIBIndexes() l2idx.FIBIndexRW

	// GetXConnectIndexes gives access to mapping of logical names (used in ETCD configuration) as xc_indexes. The mapping
	// uses the name and the index of receive interface (the one all packets are received on). XConnectMeta is a container
	// for the transmit interface name.
	GetXConnectIndexes() l2idx.XcIndexRW

	// GetAppNsIndexes gives access to mapping of app-namespace logical names (used in ETCD configuration)
	// to their respective indices as assigned by VPP.
	GetAppNsIndexes() nsidx.AppNsIndex

	// DumpIPACL returns a list of all configured IP ACLs.
	DumpIPACL() (acls []*acl.AccessLists_Acl, err error)

	// DumpMACIPACL returns a list of all configured MACIP ACLs.
	DumpMACIPACL() (acls []*acl.AccessLists_Acl, err error)

	// DumpNat44Global returns the current NAT44 global config
	DumpNat44Global() (*nat.Nat44Global, error)

	// DumpNat44DNat returns the current NAT44 DNAT config
	DumpNat44DNat() (*nat.Nat44DNat, error)

	// GetIPSecSAIndexes
	GetIPSecSAIndexes() idxvpp.NameToIdx

	// GetIPSecSPDIndexes
	GetIPSecSPDIndexes() ipsecidx.SPDIndex
}

API of VPP Plugin

type Config ¶ added in v1.8.1

type Config struct {
	Mtu              uint32   `json:"mtu"`
	Strategy         string   `json:"strategy"`
	StatusPublishers []string `json:"status-publishers"`
}

Config holds the vpp-plugin configuration.

type DataResyncReq ¶

type DataResyncReq struct {
	// ACLs is a list af all access lists that are expected to be in VPP after RESYNC.
	ACLs []*acl.AccessLists_Acl
	// Interfaces is a list af all interfaces that are expected to be in VPP after RESYNC.
	Interfaces []*interfaces.Interfaces_Interface
	// SingleHopBFDSession is a list af all BFD sessions that are expected to be in VPP after RESYNC.
	SingleHopBFDSession []*bfd.SingleHopBFD_Session
	// SingleHopBFDKey is a list af all BFD authentication keys that are expected to be in VPP after RESYNC.
	SingleHopBFDKey []*bfd.SingleHopBFD_Key
	// SingleHopBFDEcho is a list af all BFD echo functions that are expected to be in VPP after RESYNC.
	SingleHopBFDEcho []*bfd.SingleHopBFD_EchoFunction
	// BridgeDomains is a list af all BDs that are expected to be in VPP after RESYNC.
	BridgeDomains []*l2.BridgeDomains_BridgeDomain
	// FibTableEntries is a list af all FIBs that are expected to be in VPP after RESYNC.
	FibTableEntries []*l2.FibTable_FibEntry
	// XConnects is a list af all XCons that are expected to be in VPP after RESYNC.
	XConnects []*l2.XConnectPairs_XConnectPair
	// StaticRoutes is a list af all Static Routes that are expected to be in VPP after RESYNC.
	StaticRoutes []*l3.StaticRoutes_Route
	// ArpEntries is a list af all ARP entries that are expected to be in VPP after RESYNC.
	ArpEntries []*l3.ArpTable_ArpEntry
	// ProxyArpInterfaces is a list af all proxy ARP interface entries that are expected to be in VPP after RESYNC.
	ProxyArpInterfaces []*l3.ProxyArpInterfaces_InterfaceList
	// ProxyArpRanges is a list af all proxy ARP ranges that are expected to be in VPP after RESYNC.
	ProxyArpRanges []*l3.ProxyArpRanges_RangeList
	// IPScanNeigh is a IP scan neighbor config that is expected to be set in VPP after RESYNC.
	IPScanNeigh *l3.IPScanNeighbor
	// L4Features is a bool flag that is expected to be set in VPP after RESYNC.
	L4Features *l4.L4Features
	// AppNamespaces is a list af all App Namespaces that are expected to be in VPP after RESYNC.
	AppNamespaces []*l4.AppNamespaces_AppNamespace
	// StnRules is a list of all STN Rules that are expected to be in VPP after RESYNC
	StnRules []*stn.STN_Rule
	// NatGlobal is a definition of global NAT config
	Nat44Global *nat.Nat44Global
	// Nat44SNat is a list of all SNAT configurations expected to be in VPP after RESYNC
	Nat44SNat []*nat.Nat44SNat_SNatConfig
	// Nat44DNat is a list of all DNAT configurations expected to be in VPP after RESYNC
	Nat44DNat []*nat.Nat44DNat_DNatConfig
	// IPSecSPDs is a list of all IPSec Security Policy Databases expected to be in VPP after RESYNC
	IPSecSPDs []*ipsec.SecurityPolicyDatabases_SPD
	// IPSecSAs is a list of all IPSec Security Associations expected to be in VPP after RESYNC
	IPSecSAs []*ipsec.SecurityAssociations_SA
	// IPSecTunnels is a list of all IPSec Tunnel interfaces expected to be in VPP after RESYNC
	IPSecTunnels []*ipsec.TunnelInterfaces_Tunnel
	// LocalSids is a list of all segment routing local SIDs expected to be in VPP after RESYNC
	LocalSids []*srv6.LocalSID
	// SrPolicies is a list of all segment routing policies expected to be in VPP after RESYNC
	SrPolicies []*srv6.Policy
	// SrPolicySegments is a list of all segment routing policy segments (with identifiable name) expected to be in VPP after RESYNC
	SrPolicySegments []*srplugin.NamedPolicySegment
	// SrSteerings is a list of all segment routing steerings (with identifiable name) expected to be in VPP after RESYNC
	SrSteerings []*srplugin.NamedSteering
}

DataResyncReq is used to transfer expected configuration of the VPP to the plugins.

type Deps ¶

type Deps struct {
	infra.PluginDeps
	StatusCheck  statuscheck.PluginStatusWriter
	ServiceLabel servicelabel.ReaderAPI

	Publish           datasync.KeyProtoValWriter
	PublishStatistics datasync.KeyProtoValWriter
	Watcher           datasync.KeyValProtoWatcher
	IfStatePub        datasync.KeyProtoValWriter
	GoVppmux          govppmux.API
	Linux             LinuxPluginAPI
	GRPCSvc           rpc.GRPCService

	DataSyncs        map[string]datasync.KeyProtoValWriter
	WatchEventsMutex *sync.Mutex
}

Deps groups injected dependencies of plugin so that they do not mix with other plugin fieldsMtu.

type ErrCtx ¶

type ErrCtx struct {
	// contains filtered or unexported fields
}

ErrCtx is an error context struct which stores an event change with object identifier (name, etc.) and returns an error (can be nil).

type LinuxPluginAPI ¶ added in v1.8.1

type LinuxPluginAPI interface {
	// GetLinuxIfIndexes gives access to mapping of logical names (used in ETCD configuration) to corresponding Linux
	// interface indexes. This mapping is especially helpful for plugins that need to watch for newly added or deleted
	// Linux interfaces.
	GetLinuxIfIndexes() ifaceLinux.LinuxIfIndex

	// Inject VPP interface indexes directly instead of letting Linux plugin to get them itself,
	// so they are available at resync time.
	InjectVppIfIndexes(index ifaceidx.SwIfIndex)
}

LinuxPluginAPI is interface for Linux plugin.

type Option ¶ added in v1.8.1

type Option func(*Plugin)

Option is a function that can be used in NewPlugin to customize Plugin.

func UseDeps ¶ added in v1.8.1

func UseDeps(f func(*Deps)) Option

UseDeps returns Option that can inject custom dependencies.

type Plugin ¶

type Plugin struct {
	Deps
	// contains filtered or unexported fields
}

Plugin implements Plugin interface, therefore it can be loaded with other plugins.

func NewPlugin ¶ added in v1.8.1

func NewPlugin(opts ...Option) *Plugin

NewPlugin creates a new Plugin with the provides Options

func (*Plugin) AfterInit ¶

func (plugin *Plugin) AfterInit() error

AfterInit delegates the call to ifStateUpdater.

func (*Plugin) Close ¶

func (plugin *Plugin) Close() error

Close cleans up the resources.

func (*Plugin) DisableResync ¶

func (plugin *Plugin) DisableResync(keyPrefix ...string)

DisableResync can be used to disable resync for one or more key prefixes

func (*Plugin) DumpIPACL ¶

func (plugin *Plugin) DumpIPACL() (acls []*acl.AccessLists_Acl, err error)

DumpIPACL returns a list of all configured IP ACL entires

func (*Plugin) DumpMACIPACL ¶

func (plugin *Plugin) DumpMACIPACL() (acls []*acl.AccessLists_Acl, err error)

DumpMACIPACL returns a list of all configured MACIP ACL entires

func (*Plugin) DumpNat44DNat ¶

func (plugin *Plugin) DumpNat44DNat() (*nat.Nat44DNat, error)

DumpNat44DNat returns the current NAT44 DNAT config

func (*Plugin) DumpNat44Global ¶

func (plugin *Plugin) DumpNat44Global() (*nat.Nat44Global, error)

DumpNat44Global returns the current NAT44 global config

func (*Plugin) GetAppNsIndexes ¶

func (plugin *Plugin) GetAppNsIndexes() nsidx.AppNsIndex

GetAppNsIndexes gives access to mapping of app-namespace logical names (used in ETCD configuration) to their respective indices as assigned by VPP.

func (*Plugin) GetBDIndexes ¶

func (plugin *Plugin) GetBDIndexes() l2idx.BDIndex

GetBDIndexes gives access to mapping of logical names (used in ETCD configuration) as bd_indexes.

func (*Plugin) GetBfdAuthKeyIndexes ¶

func (plugin *Plugin) GetBfdAuthKeyIndexes() idxvpp.NameToIdx

GetBfdAuthKeyIndexes gives access to mapping of logical names (used in ETCD configuration) to bfd_auth_keys.

func (*Plugin) GetBfdEchoFunctionIndexes ¶

func (plugin *Plugin) GetBfdEchoFunctionIndexes() idxvpp.NameToIdx

GetBfdEchoFunctionIndexes gives access to mapping of logical names (used in ETCD configuration) to bfd_echo_function

func (*Plugin) GetBfdSessionIndexes ¶

func (plugin *Plugin) GetBfdSessionIndexes() idxvpp.NameToIdx

GetBfdSessionIndexes gives access to mapping of logical names (used in ETCD configuration) to bfd_session_indexes.

func (*Plugin) GetDHCPIndices ¶

func (plugin *Plugin) GetDHCPIndices() ifaceidx.DhcpIndex

GetDHCPIndices gives access to mapping of logical names (used in ETCD configuration) to dhcp_index. This mapping is helpful if other plugins need to know about the DHCP configuration set by VPP.

func (*Plugin) GetFIBIndexes ¶

func (plugin *Plugin) GetFIBIndexes() l2idx.FIBIndexRW

GetFIBIndexes gives access to mapping of logical names (used in ETCD configuration) as fib_indexes.

func (*Plugin) GetIPSecSAIndexes ¶

func (plugin *Plugin) GetIPSecSAIndexes() idxvpp.NameToIdx

GetIPSecSAIndexes returns SA indexes.

func (*Plugin) GetIPSecSPDIndexes ¶

func (plugin *Plugin) GetIPSecSPDIndexes() ipsecidx.SPDIndex

GetIPSecSPDIndexes returns SPD indexes.

func (*Plugin) GetSwIfIndexes ¶

func (plugin *Plugin) GetSwIfIndexes() ifaceidx.SwIfIndex

GetSwIfIndexes gives access to mapping of logical names (used in ETCD configuration) to sw_if_index. This mapping is helpful if other plugins need to configure VPP by the Binary API that uses sw_if_index input.

func (*Plugin) GetXConnectIndexes ¶

func (plugin *Plugin) GetXConnectIndexes() l2idx.XcIndexRW

GetXConnectIndexes gives access to mapping of logical names (used in ETCD configuration) as xc_indexes.

func (*Plugin) Init ¶

func (plugin *Plugin) Init() error

Init gets handlers for ETCD and Messaging and delegates them to ifConfigurator & ifStateUpdater.

Source Files ¶

View all Source files

Directories ¶

?	: This menu
/	: Search site
f or F	: Jump to
y or Y	: Canonical URL

Path	Synopsis
aclplugin Package aclplugin implements the ACL Plugin that handles management of VPP Access lists.	Package aclplugin implements the ACL Plugin that handles management of VPP Access lists.
aclidx
vppcalls Package vppcalls contains wrappers over VPP ACL binary APIs and helpers to dump ACLs configured in VPP - per interface and total.	Package vppcalls contains wrappers over VPP ACL binary APIs and helpers to dump ACLs configured in VPP - per interface and total.
binapi Package binapi defines southbound API of the default plugins.	Package binapi defines southbound API of the default plugins.
acl Package acl is a generated from VPP binary API module 'acl'.	Package acl is a generated from VPP binary API module 'acl'.
af_packet Package af_packet is a generated from VPP binary API module 'af_packet'.	Package af_packet is a generated from VPP binary API module 'af_packet'.
bfd Package bfd is a generated from VPP binary API module 'bfd'.	Package bfd is a generated from VPP binary API module 'bfd'.
dhcp Package dhcp is a generated from VPP binary API module 'dhcp'.	Package dhcp is a generated from VPP binary API module 'dhcp'.
interfaces Package interfaces is a generated from VPP binary API module 'interface'.	Package interfaces is a generated from VPP binary API module 'interface'.
ip Package ip is a generated from VPP binary API module 'ip'.	Package ip is a generated from VPP binary API module 'ip'.
ipsec Package ipsec is a generated from VPP binary API module 'ipsec'.	Package ipsec is a generated from VPP binary API module 'ipsec'.
l2 Package l2 is a generated from VPP binary API module 'l2'.	Package l2 is a generated from VPP binary API module 'l2'.
memif Package memif is a generated from VPP binary API module 'memif'.	Package memif is a generated from VPP binary API module 'memif'.
nat Package nat is a generated from VPP binary API module 'nat'.	Package nat is a generated from VPP binary API module 'nat'.
session Package session is a generated from VPP binary API module 'session'.	Package session is a generated from VPP binary API module 'session'.
sr Package sr is a generated from VPP binary API module 'sr'.	Package sr is a generated from VPP binary API module 'sr'.
stats Package stats is a generated from VPP binary API module 'stats'.	Package stats is a generated from VPP binary API module 'stats'.
stn Package stn is a generated from VPP binary API module 'stn'.	Package stn is a generated from VPP binary API module 'stn'.
tap Package tap is a generated from VPP binary API module 'tap'.	Package tap is a generated from VPP binary API module 'tap'.
tapv2 Package tapv2 is a generated from VPP binary API module 'tapv2'.	Package tapv2 is a generated from VPP binary API module 'tapv2'.
vpe Package vpe is a generated from VPP binary API module 'vpe'.	Package vpe is a generated from VPP binary API module 'vpe'.
vxlan Package vxlan is a generated from VPP binary API module 'vxlan'.	Package vxlan is a generated from VPP binary API module 'vxlan'.
ifplugin Package ifplugin implements the Interface plugin that handles management of VPP interfaces.	Package ifplugin implements the Interface plugin that handles management of VPP interfaces.
ifaceidx Package ifaceidx implements name-to-index mapping registry and cache for VPP interfaces.	Package ifaceidx implements name-to-index mapping registry and cache for VPP interfaces.
vppcalls Package vppcalls contains wrappers over VPP binary APIs for all supported interface types and for dumping all interfaces configured in VPP.	Package vppcalls contains wrappers over VPP binary APIs for all supported interface types and for dumping all interfaces configured in VPP.
ipsecplugin Package ipsecplugin implements the IPSec plugin that handles management of IPSec for VPP.	Package ipsecplugin implements the IPSec plugin that handles management of IPSec for VPP.
ipsecidx
vppcalls
l2plugin Package l2plugin implements the L2 plugin that handles Bridge Domains and L2 FIBs.	Package l2plugin implements the L2 plugin that handles Bridge Domains and L2 FIBs.
l2idx Package l2idx implements name-to-index mapping registry and cache for bridge-domains.	Package l2idx implements name-to-index mapping registry and cache for bridge-domains.
vppcalls Package vppcalls contains wrappers over VPP binary APIs for bridge-domains, and L2 FIBs and XConnect pairs and helpers for dumping them.	Package vppcalls contains wrappers over VPP binary APIs for bridge-domains, and L2 FIBs and XConnect pairs and helpers for dumping them.
l3plugin Package l3plugin implements the L3 plugin that handles L3 FIBs.	Package l3plugin implements the L3 plugin that handles L3 FIBs.
l3idx
vppcalls Package vppcalls contains wrappers over VPP binary APIs for ARPs, proxy ARPs, L3 FIBs and helpers for dumping them.	Package vppcalls contains wrappers over VPP binary APIs for ARPs, proxy ARPs, L3 FIBs and helpers for dumping them.
l4plugin
nsidx Package nsidx implements name-to-index mapping registry and cache for app namespaces	Package nsidx implements name-to-index mapping registry and cache for app namespaces
vppcalls
model Package model defines the northbound API of the default plugins.	Package model defines the northbound API of the default plugins.
acl
bfd
interfaces
ipsec
l2
l3
l4
nat
rpc Package rpc is the parent for packages defining various GRPC services generated from protobuf data models.	Package rpc is the parent for packages defining various GRPC services generated from protobuf data models.
srv6
stn
rpc
srplugin
cache Package cache contains caches for certain modeled types.	Package cache contains caches for certain modeled types.
vppcalls Package vppcalls contains wrappers over VPP binary APIs to simplify their usage	Package vppcalls contains wrappers over VPP binary APIs to simplify their usage

README ¶

VPP plugins

Config file

Documentation ¶

Overview ¶

Index ¶

Constants ¶

Variables ¶

Functions ¶

Types ¶

type API ¶

type Config ¶ added in v1.8.1

type DataResyncReq ¶

func NewDataResyncReq ¶

type Deps ¶

type ErrCtx ¶

type LinuxPluginAPI ¶ added in v1.8.1

type Option ¶ added in v1.8.1

func UseDeps ¶ added in v1.8.1

type Plugin ¶

func NewPlugin ¶ added in v1.8.1

func (*Plugin) AfterInit ¶

func (*Plugin) Close ¶

func (*Plugin) DisableResync ¶

func (*Plugin) DumpIPACL ¶

func (*Plugin) DumpMACIPACL ¶

func (*Plugin) DumpNat44DNat ¶

func (*Plugin) DumpNat44Global ¶

func (*Plugin) GetAppNsIndexes ¶

func (*Plugin) GetBDIndexes ¶

func (*Plugin) GetBfdAuthKeyIndexes ¶

func (*Plugin) GetBfdEchoFunctionIndexes ¶

func (*Plugin) GetBfdSessionIndexes ¶

func (*Plugin) GetDHCPIndices ¶

func (*Plugin) GetFIBIndexes ¶

func (*Plugin) GetIPSecSAIndexes ¶

func (*Plugin) GetIPSecSPDIndexes ¶

func (*Plugin) GetSwIfIndexes ¶

func (*Plugin) GetXConnectIndexes ¶

func (*Plugin) Init ¶

Source Files ¶

Directories ¶