aws

package
v1.0.0 Latest Latest
Warning

This package is not in the latest version of its module.

 Go to latest Published: Jun 3, 2021 License: Apache-2.0 Imports: 51 Imported by: 0

Documentation

Index

Constants

View Source 
const (
	// Provisioned IOPS SSD
	VolumeTypeIO1 = "io1"
	// General Purpose SSD
	VolumeTypeGP2 = "gp2"
	// Cold HDD (sc1)
	VolumeTypeSC1 = "sc1"
	// Throughput Optimized HDD
	VolumeTypeST1 = "st1"
)

AWS volume types

View Source 
const (
	MinTotalIOPS = 100
	MaxTotalIOPS = 20000
)

AWS provisioning limits. Source: http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/EBSVolumeTypes.html

View Source 
const (
	// ProxyProtocolPolicyName is the tag named used for the proxy protocol
	// policy
	ProxyProtocolPolicyName = "k8s-proxyprotocol-enabled"

	// SSLNegotiationPolicyNameFormat is a format string used for the SSL
	// negotiation policy tag name
	SSLNegotiationPolicyNameFormat = "k8s-SSLNegotiationPolicy-%s"
)
View Source 
const (
	// ResourceLifecycleOwned is the value we use when tagging resources to indicate
	// that the resource is considered owned and managed by the cluster,
	// and in particular that the lifecycle is tied to the lifecycle of the cluster.
	ResourceLifecycleOwned = "owned"
	// ResourceLifecycleShared is the value we use when tagging resources to indicate
	// that the resource is shared between multiple clusters, and should not be destroyed
	// if the cluster is destroyed.
	ResourceLifecycleShared = "shared"
)
View Source 
const DefaultVolumeType = "gp2"

DefaultVolumeType specifies which storage to use for newly created Volumes TODO: Remove when user/admin can configure volume types and thus we don't need hardcoded defaults.

View Source 
const MaxReadThenCreateRetries = 30

MaxReadThenCreateRetries sets the maximum number of attempts we will make when we read to see if something exists and then try to create it if we didn't find it. This can fail once in a consistent system if done in parallel In an eventually consistent system, it could fail unboundedly

View Source 
const NLBClientRuleDescription = "kubernetes.io/rule/nlb/client"

NLBClientRuleDescription is the comment used on a security group rule to indicate that it is used for client traffic

View Source 
const NLBHealthCheckRuleDescription = "kubernetes.io/rule/nlb/health"

NLBHealthCheckRuleDescription is the comment used on a security group rule to indicate that it is used for health checks

View Source 
const NLBMtuDiscoveryRuleDescription = "kubernetes.io/rule/nlb/mtu"

NLBMtuDiscoveryRuleDescription is the comment used on a security group rule to indicate that it is used for mtu discovery

View Source 
const ProviderName = "aws"

ProviderName is the name of this cloud provider.

View Source 
const ServiceAnnotationLoadBalancerAccessLogEmitInterval = "service.beta.kubernetes.io/aws-load-balancer-access-log-emit-interval"

ServiceAnnotationLoadBalancerAccessLogEmitInterval is the annotation used to specify access log emit interval.

View Source 
const ServiceAnnotationLoadBalancerAccessLogEnabled = "service.beta.kubernetes.io/aws-load-balancer-access-log-enabled"

ServiceAnnotationLoadBalancerAccessLogEnabled is the annotation used on the service to enable or disable access logs.

View Source 
const ServiceAnnotationLoadBalancerAccessLogS3BucketName = "service.beta.kubernetes.io/aws-load-balancer-access-log-s3-bucket-name"

ServiceAnnotationLoadBalancerAccessLogS3BucketName is the annotation used to specify access log s3 bucket name.

View Source 
const ServiceAnnotationLoadBalancerAccessLogS3BucketPrefix = "service.beta.kubernetes.io/aws-load-balancer-access-log-s3-bucket-prefix"

ServiceAnnotationLoadBalancerAccessLogS3BucketPrefix is the annotation used to specify access log s3 bucket prefix.

View Source 
const ServiceAnnotationLoadBalancerAdditionalTags = "service.beta.kubernetes.io/aws-load-balancer-additional-resource-tags"

ServiceAnnotationLoadBalancerAdditionalTags is the annotation used on the service to specify a comma-separated list of key-value pairs which will be recorded as additional tags in the ELB. For example: "Key1=Val1,Key2=Val2,KeyNoVal1=,KeyNoVal2"

View Source 
const ServiceAnnotationLoadBalancerBEProtocol = "service.beta.kubernetes.io/aws-load-balancer-backend-protocol"

ServiceAnnotationLoadBalancerBEProtocol is the annotation used on the service to specify the protocol spoken by the backend (pod) behind a listener. If `http` (default) or `https`, an HTTPS listener that terminates the 

connection and parses headers is created.

If set to `ssl` or `tcp`, a "raw" SSL listener is used. If set to `http` and `aws-load-balancer-ssl-cert` is not used then a HTTP listener is used.

View Source 
const ServiceAnnotationLoadBalancerCertificate = "service.beta.kubernetes.io/aws-load-balancer-ssl-cert"

ServiceAnnotationLoadBalancerCertificate is the annotation used on the service to request a secure listener. Value is a valid certificate ARN. For more, see http://docs.aws.amazon.com/ElasticLoadBalancing/latest/DeveloperGuide/elb-listener-config.html CertARN is an IAM or CM certificate ARN, e.g. arn:aws:acm:us-east-1:123456789012:certificate/12345678-1234-1234-1234-123456789012

View Source 
const ServiceAnnotationLoadBalancerConnectionDrainingEnabled = "service.beta.kubernetes.io/aws-load-balancer-connection-draining-enabled"

ServiceAnnotationLoadBalancerConnectionDrainingEnabled is the annnotation used on the service to enable or disable connection draining.

View Source 
const ServiceAnnotationLoadBalancerConnectionDrainingTimeout = "service.beta.kubernetes.io/aws-load-balancer-connection-draining-timeout"

ServiceAnnotationLoadBalancerConnectionDrainingTimeout is the annotation used on the service to specify a connection draining timeout.

View Source 
const ServiceAnnotationLoadBalancerConnectionIdleTimeout = "service.beta.kubernetes.io/aws-load-balancer-connection-idle-timeout"

ServiceAnnotationLoadBalancerConnectionIdleTimeout is the annotation used on the service to specify the idle connection timeout.

View Source 
const ServiceAnnotationLoadBalancerCrossZoneLoadBalancingEnabled = "service.beta.kubernetes.io/aws-load-balancer-cross-zone-load-balancing-enabled"

ServiceAnnotationLoadBalancerCrossZoneLoadBalancingEnabled is the annotation used on the service to enable or disable cross-zone load balancing.

View Source 
const ServiceAnnotationLoadBalancerExtraSecurityGroups = "service.beta.kubernetes.io/aws-load-balancer-extra-security-groups"

ServiceAnnotationLoadBalancerExtraSecurityGroups is the annotation used on the service to specify additional security groups to be added to ELB created

View Source 
const ServiceAnnotationLoadBalancerHCHealthyThreshold = "service.beta.kubernetes.io/aws-load-balancer-healthcheck-healthy-threshold"

ServiceAnnotationLoadBalancerHCHealthyThreshold is the annotation used on the service to specify the number of successive successful health checks required for a backend to be considered healthy for traffic.

View Source 
const ServiceAnnotationLoadBalancerHCInterval = "service.beta.kubernetes.io/aws-load-balancer-healthcheck-interval"

ServiceAnnotationLoadBalancerHCInterval is the annotation used on the service to specify, in seconds, the interval between health checks.

View Source 
const ServiceAnnotationLoadBalancerHCTimeout = "service.beta.kubernetes.io/aws-load-balancer-healthcheck-timeout"

ServiceAnnotationLoadBalancerHCTimeout is the annotation used on the service to specify, in seconds, how long to wait before marking a health check as failed.

View Source 
const ServiceAnnotationLoadBalancerHCUnhealthyThreshold = "service.beta.kubernetes.io/aws-load-balancer-healthcheck-unhealthy-threshold"

ServiceAnnotationLoadBalancerHCUnhealthyThreshold is the annotation used on the service to specify the number of unsuccessful health checks required for a backend to be considered unhealthy for traffic

View Source 
const ServiceAnnotationLoadBalancerInternal = "service.beta.kubernetes.io/aws-load-balancer-internal"

ServiceAnnotationLoadBalancerInternal is the annotation used on the service to indicate that we want an internal ELB.

View Source 
const ServiceAnnotationLoadBalancerProxyProtocol = "service.beta.kubernetes.io/aws-load-balancer-proxy-protocol"

ServiceAnnotationLoadBalancerProxyProtocol is the annotation used on the service to enable the proxy protocol on an ELB. Right now we only accept the value "*" which means enable the proxy protocol on all ELB backends. In the future we could adjust this to allow setting the proxy protocol only on certain backends.

View Source 
const ServiceAnnotationLoadBalancerSSLNegotiationPolicy = "service.beta.kubernetes.io/aws-load-balancer-ssl-negotiation-policy"

ServiceAnnotationLoadBalancerSSLNegotiationPolicy is the annotation used on the service to specify a SSL negotiation settings for the HTTPS/SSL listeners of your load balancer. Defaults to AWS's default

View Source 
const ServiceAnnotationLoadBalancerSSLPorts = "service.beta.kubernetes.io/aws-load-balancer-ssl-ports"

ServiceAnnotationLoadBalancerSSLPorts is the annotation used on the service to specify a comma-separated list of ports that will use SSL/HTTPS listeners. Defaults to '*' (all).

View Source 
const ServiceAnnotationLoadBalancerSecurityGroups = "service.beta.kubernetes.io/aws-load-balancer-security-groups"

ServiceAnnotationLoadBalancerSecurityGroups is the annotation used on the service to specify the security groups to be added to ELB created. Differently from the annotation "service.beta.kubernetes.io/aws-load-balancer-extra-security-groups", this replaces all other security groups previously assigned to the ELB.

View Source 
const ServiceAnnotationLoadBalancerType = "service.beta.kubernetes.io/aws-load-balancer-type"

ServiceAnnotationLoadBalancerType is the annotation used on the service to indicate what type of Load Balancer we want. Right now, the only accepted value is "nlb"

View Source 
const TagNameKubernetesClusterLegacy = "KubernetesCluster"

TagNameKubernetesClusterLegacy is the legacy tag name we use to differentiate multiple logically independent clusters running in the same AZ. The problem with it was that it did not allow shared resources.

View Source 
const TagNameKubernetesClusterPrefix = "kubernetes.io/cluster/"

TagNameKubernetesClusterPrefix is the tag name we use to differentiate multiple logically independent clusters running in the same AZ. The tag key = TagNameKubernetesClusterPrefix + clusterID The tag value is an ownership value

View Source 
const TagNameKubernetesService = "kubernetes.io/service-name"

TagNameKubernetesService is the tag name we use to differentiate multiple services. Used currently for ELBs only.

View Source 
const TagNameSubnetInternalELB = "kubernetes.io/role/internal-elb"

TagNameSubnetInternalELB is the tag name used on a subnet to designate that it should be used for internal ELBs

View Source 
const TagNameSubnetPublicELB = "kubernetes.io/role/elb"

TagNameSubnetPublicELB is the tag name used on a subnet to designate that it should be used for internet ELBs

Variables

This section is empty.

Functions

func GetAWSVolumeID 

func GetAWSVolumeID(kubeVolumeID string) (string, error)

GetAWSVolumeID converts a Kubernetes volume ID to an AWS volume ID

func ResizeInstanceGroup 

func ResizeInstanceGroup(asg ASG, instanceGroupName string, size int) error

ResizeInstanceGroup sets the size of the specificed instancegroup Exported so it can be used by the e2e tests, which don't want to instantiate a full cloudprovider.

Types

type ASG 

type ASG interface {
	UpdateAutoScalingGroup(*autoscaling.UpdateAutoScalingGroupInput) (*autoscaling.UpdateAutoScalingGroupOutput, error)
	DescribeAutoScalingGroups(*autoscaling.DescribeAutoScalingGroupsInput) (*autoscaling.DescribeAutoScalingGroupsOutput, error)
}

ASG is a simple pass-through of the Autoscaling client interface, which allows for testing.

type Backoff 

type Backoff struct {
	// contains filtered or unexported fields
}

Backoff manages a backoff that varies based on the recently observed failures

func (*Backoff) ComputeDelayForRequest 

func (b *Backoff) ComputeDelayForRequest(now time.Time) time.Duration

ComputeDelayForRequest computes the delay required for a request, also updates internal state to count this request

func (*Backoff) ReportError 

func (b *Backoff) ReportError()

ReportError is called when we observe a throttling error

type Cloud 

type Cloud struct {
	// contains filtered or unexported fields
}

Cloud is an implementation of Interface, LoadBalancer and Instances for Amazon Web Services.

func (*Cloud) AddSSHKeyToAllInstances 

func (c *Cloud) AddSSHKeyToAllInstances(ctx context.Context, user string, keyData []byte) error

AddSSHKeyToAllInstances is currently not implemented.

func (*Cloud) AttachDisk 

func (c *Cloud) AttachDisk(diskName KubernetesVolumeID, nodeName types.NodeName) (string, error)

AttachDisk implements Volumes.AttachDisk

func (*Cloud) Clusters 

func (c *Cloud) Clusters() (cloudprovider.Clusters, bool)

Clusters returns the list of clusters.

func (*Cloud) CreateDisk 

func (c *Cloud) CreateDisk(volumeOptions *VolumeOptions) (KubernetesVolumeID, error)

CreateDisk implements Volumes.CreateDisk

func (*Cloud) CreateRoute 

func (c *Cloud) CreateRoute(ctx context.Context, clusterName string, nameHint string, route *cloudprovider.Route) error

CreateRoute implements Routes.CreateRoute Create the described route

func (*Cloud) CurrentNodeName 

func (c *Cloud) CurrentNodeName(ctx context.Context, hostname string) (types.NodeName, error)

CurrentNodeName returns the name of the current node

func (*Cloud) DeleteDisk 

func (c *Cloud) DeleteDisk(volumeName KubernetesVolumeID) (bool, error)

DeleteDisk implements Volumes.DeleteDisk

func (*Cloud) DeleteRoute 

func (c *Cloud) DeleteRoute(ctx context.Context, clusterName string, route *cloudprovider.Route) error

DeleteRoute implements Routes.DeleteRoute Delete the specified route

func (*Cloud) DescribeInstanceGroup 

func (c *Cloud) DescribeInstanceGroup(instanceGroupName string) (InstanceGroupInfo, error)

DescribeInstanceGroup implements InstanceGroups.DescribeInstanceGroup Queries the cloud provider for information about the specified instance group

func (*Cloud) DetachDisk 

func (c *Cloud) DetachDisk(diskName KubernetesVolumeID, nodeName types.NodeName) (string, error)

DetachDisk implements Volumes.DetachDisk

func (*Cloud) DiskIsAttached 

func (c *Cloud) DiskIsAttached(diskName KubernetesVolumeID, nodeName types.NodeName) (bool, error)

DiskIsAttached implements Volumes.DiskIsAttached

func (*Cloud) DisksAreAttached 

func (c *Cloud) DisksAreAttached(nodeDisks map[types.NodeName][]KubernetesVolumeID) (map[types.NodeName]map[KubernetesVolumeID]bool, error)

DisksAreAttached returns a map of nodes and Kubernetes volume IDs indicating if the volumes are attached to the node

func (*Cloud) EnsureLoadBalancer 

func (c *Cloud) EnsureLoadBalancer(ctx context.Context, clusterName string, apiService *v1.Service, nodes []*v1.Node) (*v1.LoadBalancerStatus, error)

EnsureLoadBalancer implements LoadBalancer.EnsureLoadBalancer

func (*Cloud) EnsureLoadBalancerDeleted 

func (c *Cloud) EnsureLoadBalancerDeleted(ctx context.Context, clusterName string, service *v1.Service) error

EnsureLoadBalancerDeleted implements LoadBalancer.EnsureLoadBalancerDeleted.

func (*Cloud) GetCandidateZonesForDynamicVolume 

func (c *Cloud) GetCandidateZonesForDynamicVolume() (sets.String, error)

GetCandidateZonesForDynamicVolume retrieves a list of all the zones in which nodes are running It currently involves querying all instances

func (*Cloud) GetDiskPath 

func (c *Cloud) GetDiskPath(volumeName KubernetesVolumeID) (string, error)

GetDiskPath implements Volumes.GetDiskPath

func (*Cloud) GetLabelsForVolume 

func (c *Cloud) GetLabelsForVolume(ctx context.Context, pv *v1.PersistentVolume) (map[string]string, error)

GetLabelsForVolume gets the volume labels for a volume

func (*Cloud) GetLoadBalancer 

func (c *Cloud) GetLoadBalancer(ctx context.Context, clusterName string, service *v1.Service) (*v1.LoadBalancerStatus, bool, error)

GetLoadBalancer is an implementation of LoadBalancer.GetLoadBalancer

func (*Cloud) GetLoadBalancerName 

func (c *Cloud) GetLoadBalancerName(ctx context.Context, clusterName string, service *v1.Service) string

GetLoadBalancerName is an implementation of LoadBalancer.GetLoadBalancerName

func (*Cloud) GetVolumeLabels 

func (c *Cloud) GetVolumeLabels(volumeName KubernetesVolumeID) (map[string]string, error)

GetVolumeLabels implements Volumes.GetVolumeLabels

func (*Cloud) GetZone 

func (c *Cloud) GetZone(ctx context.Context) (cloudprovider.Zone, error)

GetZone implements Zones.GetZone

func (*Cloud) GetZoneByNodeName 

func (c *Cloud) GetZoneByNodeName(ctx context.Context, nodeName types.NodeName) (cloudprovider.Zone, error)

GetZoneByNodeName implements Zones.GetZoneByNodeName This is particularly useful in external cloud providers where the kubelet does not initialize node data.

func (*Cloud) GetZoneByProviderID 

func (c *Cloud) GetZoneByProviderID(ctx context.Context, providerID string) (cloudprovider.Zone, error)

GetZoneByProviderID implements Zones.GetZoneByProviderID This is particularly useful in external cloud providers where the kubelet does not initialize node data.

func (*Cloud) HasClusterID 

func (c *Cloud) HasClusterID() bool

HasClusterID returns true if the cluster has a clusterID

func (*Cloud) Initialize 

func (c *Cloud) Initialize(clientBuilder cloudprovider.ControllerClientBuilder, stop <-chan struct{})

Initialize passes a Kubernetes clientBuilder interface to the cloud provider

func (*Cloud) InstanceExistsByProviderID 

func (c *Cloud) InstanceExistsByProviderID(ctx context.Context, providerID string) (bool, error)

InstanceExistsByProviderID returns true if the instance with the given provider id still exists. If false is returned with no error, the instance will be immediately deleted by the cloud controller manager.

func (*Cloud) InstanceID 

func (c *Cloud) InstanceID(ctx context.Context, nodeName types.NodeName) (string, error)

InstanceID returns the cloud provider ID of the node with the specified nodeName.

func (*Cloud) InstanceShutdownByProviderID 

func (c *Cloud) InstanceShutdownByProviderID(ctx context.Context, providerID string) (bool, error)

InstanceShutdownByProviderID returns true if the instance is in safe state to detach volumes

func (*Cloud) InstanceType 

func (c *Cloud) InstanceType(ctx context.Context, nodeName types.NodeName) (string, error)

InstanceType returns the type of the node with the specified nodeName.

func (*Cloud) InstanceTypeByProviderID 

func (c *Cloud) InstanceTypeByProviderID(ctx context.Context, providerID string) (string, error)

InstanceTypeByProviderID returns the cloudprovider instance type of the node with the specified unique providerID This method will not be called from the node that is requesting this ID. i.e. metadata service and other local methods cannot be used here

func (*Cloud) Instances 

func (c *Cloud) Instances() (cloudprovider.Instances, bool)

Instances returns an implementation of Instances for Amazon Web Services.

func (*Cloud) ListRoutes 

func (c *Cloud) ListRoutes(ctx context.Context, clusterName string) ([]*cloudprovider.Route, error)

ListRoutes implements Routes.ListRoutes List all routes that match the filter

func (*Cloud) LoadBalancer 

func (c *Cloud) LoadBalancer() (cloudprovider.LoadBalancer, bool)

LoadBalancer returns an implementation of LoadBalancer for Amazon Web Services.

func (*Cloud) NodeAddresses 

func (c *Cloud) NodeAddresses(ctx context.Context, name types.NodeName) ([]v1.NodeAddress, error)

NodeAddresses is an implementation of Instances.NodeAddresses.

func (*Cloud) NodeAddressesByProviderID 

func (c *Cloud) NodeAddressesByProviderID(ctx context.Context, providerID string) ([]v1.NodeAddress, error)

NodeAddressesByProviderID returns the node addresses of an instances with the specified unique providerID This method will not be called from the node that is requesting this ID. i.e. metadata service and other local methods cannot be used here

func (*Cloud) ProviderName 

func (c *Cloud) ProviderName() string

ProviderName returns the cloud provider ID.

func (*Cloud) ResizeDisk 

func (c *Cloud) ResizeDisk(
	diskName KubernetesVolumeID,
	oldSize resource.Quantity,
	newSize resource.Quantity) (resource.Quantity, error)

ResizeDisk resizes an EBS volume in GiB increments, it will round up to the next GiB if arguments are not provided in even GiB increments

func (*Cloud) ResizeInstanceGroup 

func (c *Cloud) ResizeInstanceGroup(instanceGroupName string, size int) error

ResizeInstanceGroup implements InstanceGroups.ResizeInstanceGroup Set the size to the fixed size

func (*Cloud) Routes 

func (c *Cloud) Routes() (cloudprovider.Routes, bool)

Routes returns an implementation of Routes for Amazon Web Services.

func (*Cloud) UpdateLoadBalancer 

func (c *Cloud) UpdateLoadBalancer(ctx context.Context, clusterName string, service *v1.Service, nodes []*v1.Node) error

UpdateLoadBalancer implements LoadBalancer.UpdateLoadBalancer

func (*Cloud) Zones 

func (c *Cloud) Zones() (cloudprovider.Zones, bool)

Zones returns an implementation of Zones for Amazon Web Services.

type CloudConfig 

type CloudConfig struct {
	Global struct {
		// TODO: Is there any use for this?  We can get it from the instance metadata service
		// Maybe if we're not running on AWS, e.g. bootstrap; for now it is not very useful
		Zone string

		// The AWS VPC flag enables the possibility to run the master components
		// on a different aws account, on a different cloud provider or on-premises.
		// If the flag is set also the KubernetesClusterTag must be provided
		VPC string
		// SubnetID enables using a specific subnet to use for ELB's
		SubnetID string
		// RouteTableID enables using a specific RouteTable
		RouteTableID string

		// RoleARN is the IAM role to assume when interaction with AWS APIs.
		RoleARN string

		// KubernetesClusterTag is the legacy cluster id we'll use to identify our cluster resources
		KubernetesClusterTag string
		// KubernetesClusterID is the cluster id we'll use to identify our cluster resources
		KubernetesClusterID string

		//The aws provider creates an inbound rule per load balancer on the node security
		//group. However, this can run into the AWS security group rule limit of 50 if
		//many LoadBalancers are created.
		//
		//This flag disables the automatic ingress creation. It requires that the user
		//has setup a rule that allows inbound traffic on kubelet ports from the
		//local VPC subnet (so load balancers can access it). E.g. 10.82.0.0/16 30000-32000.
		DisableSecurityGroupIngress bool

		//AWS has a hard limit of 500 security groups. For large clusters creating a security group for each ELB
		//can cause the max number of security groups to be reached. If this is set instead of creating a new
		//Security group for each ELB this security group will be used instead.
		ElbSecurityGroup string

		//During the instantiation of an new AWS cloud provider, the detected region
		//is validated against a known set of regions.
		//
		//In a non-standard, AWS like environment (e.g. Eucalyptus), this check may
		//be undesirable.  Setting this to true will disable the check and provide
		//a warning that the check was skipped.  Please note that this is an
		//experimental feature and work-in-progress for the moment.  If you find
		//yourself in an non-AWS cloud and open an issue, please indicate that in the
		//issue body.
		DisableStrictZoneCheck bool
	}
}

CloudConfig wraps the settings for the AWS cloud provider.

type CrossRequestRetryDelay 

type CrossRequestRetryDelay struct {
	// contains filtered or unexported fields
}

CrossRequestRetryDelay inserts delays before AWS calls, when we are observing RequestLimitExceeded errors Note that we share a CrossRequestRetryDelay across multiple AWS requests; this is a process-wide back-off, whereas the aws-sdk-go implements a per-request exponential backoff/retry

func NewCrossRequestRetryDelay 

func NewCrossRequestRetryDelay() *CrossRequestRetryDelay

NewCrossRequestRetryDelay creates a new CrossRequestRetryDelay

func (*CrossRequestRetryDelay) AfterRetry 

func (c *CrossRequestRetryDelay) AfterRetry(r *request.Request)

AfterRetry is added to the AfterRetry chain; called after any error

func (*CrossRequestRetryDelay) BeforeSign 

func (c *CrossRequestRetryDelay) BeforeSign(r *request.Request)

BeforeSign is added to the Sign chain; called before each request

type DeviceAllocator 

type DeviceAllocator interface {
	// GetNext returns a free device name or error when there is no free device
	// name. Only the device suffix is returned, e.g. "ba" for "/dev/xvdba".
	// It's up to the called to add appropriate "/dev/sd" or "/dev/xvd" prefix.
	GetNext(existingDevices ExistingDevices) (mountDevice, error)

	// Deprioritize the device so as it can't be used immediately again
	Deprioritize(mountDevice)

	// Lock the deviceAllocator
	Lock()

	// Unlock the deviceAllocator
	Unlock()
}

DeviceAllocator finds available device name, taking into account already assigned device names from ExistingDevices map. It tries to find the next device name to the previously assigned one (from previous DeviceAllocator call), so all available device names are used eventually and it minimizes device name reuse.

All these allocations are in-memory, nothing is written to / read from /dev directory.

On AWS, we should assign new (not yet used) device names to attached volumes. If we reuse a previously used name, we may get the volume "attaching" forever, see https://aws.amazon.com/premiumsupport/knowledge-center/ebs-stuck-attaching/.

func NewDeviceAllocator 

func NewDeviceAllocator() DeviceAllocator

NewDeviceAllocator allocates device names according to scheme ba..bz, ca..cz it moves along the ring and always picks next device until device list is exhausted.

type EBSVolumeID 

type EBSVolumeID string

EBSVolumeID represents the ID of the volume in the AWS API, e.g. vol-12345678 The "traditional" format is "vol-12345678" A new longer format is also being introduced: "vol-12345678abcdef01" We should not assume anything about the length or format, though it seems reasonable to assume that volumes will continue to start with "vol-".

type EC2 

type EC2 interface {
	// Query EC2 for instances matching the filter
	DescribeInstances(request *ec2.DescribeInstancesInput) ([]*ec2.Instance, error)

	// Attach a volume to an instance
	AttachVolume(*ec2.AttachVolumeInput) (*ec2.VolumeAttachment, error)
	// Detach a volume from an instance it is attached to
	DetachVolume(request *ec2.DetachVolumeInput) (resp *ec2.VolumeAttachment, err error)
	// Lists volumes
	DescribeVolumes(request *ec2.DescribeVolumesInput) ([]*ec2.Volume, error)
	// Create an EBS volume
	CreateVolume(request *ec2.CreateVolumeInput) (resp *ec2.Volume, err error)
	// Delete an EBS volume
	DeleteVolume(*ec2.DeleteVolumeInput) (*ec2.DeleteVolumeOutput, error)

	ModifyVolume(*ec2.ModifyVolumeInput) (*ec2.ModifyVolumeOutput, error)

	DescribeVolumeModifications(*ec2.DescribeVolumesModificationsInput) ([]*ec2.VolumeModification, error)

	DescribeSecurityGroups(request *ec2.DescribeSecurityGroupsInput) ([]*ec2.SecurityGroup, error)

	CreateSecurityGroup(*ec2.CreateSecurityGroupInput) (*ec2.CreateSecurityGroupOutput, error)
	DeleteSecurityGroup(request *ec2.DeleteSecurityGroupInput) (*ec2.DeleteSecurityGroupOutput, error)

	AuthorizeSecurityGroupIngress(*ec2.AuthorizeSecurityGroupIngressInput) (*ec2.AuthorizeSecurityGroupIngressOutput, error)
	RevokeSecurityGroupIngress(*ec2.RevokeSecurityGroupIngressInput) (*ec2.RevokeSecurityGroupIngressOutput, error)

	DescribeSubnets(*ec2.DescribeSubnetsInput) ([]*ec2.Subnet, error)

	CreateTags(*ec2.CreateTagsInput) (*ec2.CreateTagsOutput, error)

	DescribeRouteTables(request *ec2.DescribeRouteTablesInput) ([]*ec2.RouteTable, error)
	CreateRoute(request *ec2.CreateRouteInput) (*ec2.CreateRouteOutput, error)
	DeleteRoute(request *ec2.DeleteRouteInput) (*ec2.DeleteRouteOutput, error)

	ModifyInstanceAttribute(request *ec2.ModifyInstanceAttributeInput) (*ec2.ModifyInstanceAttributeOutput, error)

	DescribeVpcs(input *ec2.DescribeVpcsInput) (*ec2.DescribeVpcsOutput, error)
}

EC2 is an abstraction over AWS', to allow mocking/other implementations Note that the DescribeX functions return a list, so callers don't need to deal with paging TODO: Should we rename this to AWS (EBS & ELB are not technically part of EC2)

type EC2Metadata 

type EC2Metadata interface {
	// Query the EC2 metadata service (used to discover instance-id etc)
	GetMetadata(path string) (string, error)
}

EC2Metadata is an abstraction over the AWS metadata service.

type ELB 

type ELB interface {
	CreateLoadBalancer(*elb.CreateLoadBalancerInput) (*elb.CreateLoadBalancerOutput, error)
	DeleteLoadBalancer(*elb.DeleteLoadBalancerInput) (*elb.DeleteLoadBalancerOutput, error)
	DescribeLoadBalancers(*elb.DescribeLoadBalancersInput) (*elb.DescribeLoadBalancersOutput, error)
	AddTags(*elb.AddTagsInput) (*elb.AddTagsOutput, error)
	RegisterInstancesWithLoadBalancer(*elb.RegisterInstancesWithLoadBalancerInput) (*elb.RegisterInstancesWithLoadBalancerOutput, error)
	DeregisterInstancesFromLoadBalancer(*elb.DeregisterInstancesFromLoadBalancerInput) (*elb.DeregisterInstancesFromLoadBalancerOutput, error)
	CreateLoadBalancerPolicy(*elb.CreateLoadBalancerPolicyInput) (*elb.CreateLoadBalancerPolicyOutput, error)
	SetLoadBalancerPoliciesForBackendServer(*elb.SetLoadBalancerPoliciesForBackendServerInput) (*elb.SetLoadBalancerPoliciesForBackendServerOutput, error)
	SetLoadBalancerPoliciesOfListener(input *elb.SetLoadBalancerPoliciesOfListenerInput) (*elb.SetLoadBalancerPoliciesOfListenerOutput, error)
	DescribeLoadBalancerPolicies(input *elb.DescribeLoadBalancerPoliciesInput) (*elb.DescribeLoadBalancerPoliciesOutput, error)

	DetachLoadBalancerFromSubnets(*elb.DetachLoadBalancerFromSubnetsInput) (*elb.DetachLoadBalancerFromSubnetsOutput, error)
	AttachLoadBalancerToSubnets(*elb.AttachLoadBalancerToSubnetsInput) (*elb.AttachLoadBalancerToSubnetsOutput, error)

	CreateLoadBalancerListeners(*elb.CreateLoadBalancerListenersInput) (*elb.CreateLoadBalancerListenersOutput, error)
	DeleteLoadBalancerListeners(*elb.DeleteLoadBalancerListenersInput) (*elb.DeleteLoadBalancerListenersOutput, error)

	ApplySecurityGroupsToLoadBalancer(*elb.ApplySecurityGroupsToLoadBalancerInput) (*elb.ApplySecurityGroupsToLoadBalancerOutput, error)

	ConfigureHealthCheck(*elb.ConfigureHealthCheckInput) (*elb.ConfigureHealthCheckOutput, error)

	DescribeLoadBalancerAttributes(*elb.DescribeLoadBalancerAttributesInput) (*elb.DescribeLoadBalancerAttributesOutput, error)
	ModifyLoadBalancerAttributes(*elb.ModifyLoadBalancerAttributesInput) (*elb.ModifyLoadBalancerAttributesOutput, error)
}

ELB is a simple pass-through of AWS' ELB client interface, which allows for testing

type ELBV2 

type ELBV2 interface {
	AddTags(input *elbv2.AddTagsInput) (*elbv2.AddTagsOutput, error)

	CreateLoadBalancer(*elbv2.CreateLoadBalancerInput) (*elbv2.CreateLoadBalancerOutput, error)
	DescribeLoadBalancers(*elbv2.DescribeLoadBalancersInput) (*elbv2.DescribeLoadBalancersOutput, error)
	DeleteLoadBalancer(*elbv2.DeleteLoadBalancerInput) (*elbv2.DeleteLoadBalancerOutput, error)

	ModifyLoadBalancerAttributes(*elbv2.ModifyLoadBalancerAttributesInput) (*elbv2.ModifyLoadBalancerAttributesOutput, error)
	DescribeLoadBalancerAttributes(*elbv2.DescribeLoadBalancerAttributesInput) (*elbv2.DescribeLoadBalancerAttributesOutput, error)

	CreateTargetGroup(*elbv2.CreateTargetGroupInput) (*elbv2.CreateTargetGroupOutput, error)
	DescribeTargetGroups(*elbv2.DescribeTargetGroupsInput) (*elbv2.DescribeTargetGroupsOutput, error)
	ModifyTargetGroup(*elbv2.ModifyTargetGroupInput) (*elbv2.ModifyTargetGroupOutput, error)
	DeleteTargetGroup(*elbv2.DeleteTargetGroupInput) (*elbv2.DeleteTargetGroupOutput, error)

	DescribeTargetHealth(input *elbv2.DescribeTargetHealthInput) (*elbv2.DescribeTargetHealthOutput, error)

	DescribeTargetGroupAttributes(*elbv2.DescribeTargetGroupAttributesInput) (*elbv2.DescribeTargetGroupAttributesOutput, error)
	ModifyTargetGroupAttributes(*elbv2.ModifyTargetGroupAttributesInput) (*elbv2.ModifyTargetGroupAttributesOutput, error)

	RegisterTargets(*elbv2.RegisterTargetsInput) (*elbv2.RegisterTargetsOutput, error)
	DeregisterTargets(*elbv2.DeregisterTargetsInput) (*elbv2.DeregisterTargetsOutput, error)

	CreateListener(*elbv2.CreateListenerInput) (*elbv2.CreateListenerOutput, error)
	DescribeListeners(*elbv2.DescribeListenersInput) (*elbv2.DescribeListenersOutput, error)
	DeleteListener(*elbv2.DeleteListenerInput) (*elbv2.DeleteListenerOutput, error)
	ModifyListener(*elbv2.ModifyListenerInput) (*elbv2.ModifyListenerOutput, error)

	WaitUntilLoadBalancersDeleted(*elbv2.DescribeLoadBalancersInput) error
}

ELBV2 is a simple pass-through of AWS' ELBV2 client interface, which allows for testing

type ExistingDevices 

type ExistingDevices map[mountDevice]EBSVolumeID

ExistingDevices is a map of assigned devices. Presence of a key with a device name in the map means that the device is allocated. Value is irrelevant and can be used for anything that DeviceAllocator user wants. Only the relevant part of device name should be in the map, e.g. "ba" for "/dev/xvdba".

type FakeASG 

type FakeASG struct {
	// contains filtered or unexported fields
}

FakeASG is a fake Autoscaling client used for testing

func (*FakeASG) DescribeAutoScalingGroups 

func (a *FakeASG) DescribeAutoScalingGroups(*autoscaling.DescribeAutoScalingGroupsInput) (*autoscaling.DescribeAutoScalingGroupsOutput, error)

DescribeAutoScalingGroups is not implemented but is required for interface conformance

func (*FakeASG) UpdateAutoScalingGroup 

func (a *FakeASG) UpdateAutoScalingGroup(*autoscaling.UpdateAutoScalingGroupInput) (*autoscaling.UpdateAutoScalingGroupOutput, error)

UpdateAutoScalingGroup is not implemented but is required for interface conformance

type FakeAWSServices 

type FakeAWSServices struct {
	// contains filtered or unexported fields
}

FakeAWSServices is an fake AWS session used for testing

func NewFakeAWSServices 

func NewFakeAWSServices(clusterID string) *FakeAWSServices

NewFakeAWSServices creates a new FakeAWSServices

func (*FakeAWSServices) Autoscaling 

func (s *FakeAWSServices) Autoscaling(region string) (ASG, error)

Autoscaling returns a fake ASG client

func (*FakeAWSServices) Compute 

func (s *FakeAWSServices) Compute(region string) (EC2, error)

Compute returns a fake EC2 client

func (*FakeAWSServices) KeyManagement 

func (s *FakeAWSServices) KeyManagement(region string) (KMS, error)

KeyManagement returns a fake KMS client

func (*FakeAWSServices) LoadBalancing 

func (s *FakeAWSServices) LoadBalancing(region string) (ELB, error)

LoadBalancing returns a fake ELB client

func (*FakeAWSServices) LoadBalancingV2 

func (s *FakeAWSServices) LoadBalancingV2(region string) (ELBV2, error)

LoadBalancingV2 returns a fake ELBV2 client

func (*FakeAWSServices) Metadata 

func (s *FakeAWSServices) Metadata() (EC2Metadata, error)

Metadata returns a fake EC2Metadata client

func (*FakeAWSServices) WithAz 

func (s *FakeAWSServices) WithAz(az string) *FakeAWSServices

WithAz sets the ec2 placement availability zone

type FakeEC2 

type FakeEC2 interface {
	EC2
	CreateSubnet(*ec2.Subnet) (*ec2.CreateSubnetOutput, error)
	RemoveSubnets()
	CreateRouteTable(*ec2.RouteTable) (*ec2.CreateRouteTableOutput, error)
	RemoveRouteTables()
}

FakeEC2 is a fake EC2 client used for testing

type FakeEC2Impl 

type FakeEC2Impl struct {
	Subnets                  []*ec2.Subnet
	DescribeSubnetsInput     *ec2.DescribeSubnetsInput
	RouteTables              []*ec2.RouteTable
	DescribeRouteTablesInput *ec2.DescribeRouteTablesInput
	// contains filtered or unexported fields
}

FakeEC2Impl is an implementation of the FakeEC2 interface used for testing

func (*FakeEC2Impl) AttachVolume 

func (ec2i *FakeEC2Impl) AttachVolume(request *ec2.AttachVolumeInput) (resp *ec2.VolumeAttachment, err error)

AttachVolume is not implemented but is required for interface conformance

func (*FakeEC2Impl) AuthorizeSecurityGroupIngress 

func (ec2i *FakeEC2Impl) AuthorizeSecurityGroupIngress(*ec2.AuthorizeSecurityGroupIngressInput) (*ec2.AuthorizeSecurityGroupIngressOutput, error)

AuthorizeSecurityGroupIngress is not implemented but is required for interface conformance

func (*FakeEC2Impl) CreateRoute 

func (ec2i *FakeEC2Impl) CreateRoute(request *ec2.CreateRouteInput) (*ec2.CreateRouteOutput, error)

CreateRoute is not implemented but is required for interface conformance

func (*FakeEC2Impl) CreateRouteTable 

func (ec2i *FakeEC2Impl) CreateRouteTable(request *ec2.RouteTable) (*ec2.CreateRouteTableOutput, error)

CreateRouteTable creates fake route tables

func (*FakeEC2Impl) CreateSecurityGroup 

func (ec2i *FakeEC2Impl) CreateSecurityGroup(*ec2.CreateSecurityGroupInput) (*ec2.CreateSecurityGroupOutput, error)

CreateSecurityGroup is not implemented but is required for interface conformance

func (*FakeEC2Impl) CreateSubnet 

func (ec2i *FakeEC2Impl) CreateSubnet(request *ec2.Subnet) (*ec2.CreateSubnetOutput, error)

CreateSubnet creates fake subnets

func (*FakeEC2Impl) CreateTags 

func (ec2i *FakeEC2Impl) CreateTags(*ec2.CreateTagsInput) (*ec2.CreateTagsOutput, error)

CreateTags is not implemented but is required for interface conformance

func (*FakeEC2Impl) CreateVolume 

func (ec2i *FakeEC2Impl) CreateVolume(request *ec2.CreateVolumeInput) (resp *ec2.Volume, err error)

CreateVolume is not implemented but is required for interface conformance

func (*FakeEC2Impl) DeleteRoute 

func (ec2i *FakeEC2Impl) DeleteRoute(request *ec2.DeleteRouteInput) (*ec2.DeleteRouteOutput, error)

DeleteRoute is not implemented but is required for interface conformance

func (*FakeEC2Impl) DeleteSecurityGroup 

func (ec2i *FakeEC2Impl) DeleteSecurityGroup(*ec2.DeleteSecurityGroupInput) (*ec2.DeleteSecurityGroupOutput, error)

DeleteSecurityGroup is not implemented but is required for interface conformance

func (*FakeEC2Impl) DeleteVolume 

func (ec2i *FakeEC2Impl) DeleteVolume(request *ec2.DeleteVolumeInput) (resp *ec2.DeleteVolumeOutput, err error)

DeleteVolume is not implemented but is required for interface conformance

func (*FakeEC2Impl) DescribeInstances 

func (ec2i *FakeEC2Impl) DescribeInstances(request *ec2.DescribeInstancesInput) ([]*ec2.Instance, error)

DescribeInstances returns fake instance descriptions

func (*FakeEC2Impl) DescribeRouteTables 

func (ec2i *FakeEC2Impl) DescribeRouteTables(request *ec2.DescribeRouteTablesInput) ([]*ec2.RouteTable, error)

DescribeRouteTables returns fake route table descriptions

func (*FakeEC2Impl) DescribeSecurityGroups 

func (ec2i *FakeEC2Impl) DescribeSecurityGroups(request *ec2.DescribeSecurityGroupsInput) ([]*ec2.SecurityGroup, error)

DescribeSecurityGroups is not implemented but is required for interface conformance

func (*FakeEC2Impl) DescribeSubnets 

func (ec2i *FakeEC2Impl) DescribeSubnets(request *ec2.DescribeSubnetsInput) ([]*ec2.Subnet, error)

DescribeSubnets returns fake subnet descriptions

func (*FakeEC2Impl) DescribeVolumeModifications 

func (ec2i *FakeEC2Impl) DescribeVolumeModifications(*ec2.DescribeVolumesModificationsInput) ([]*ec2.VolumeModification, error)

DescribeVolumeModifications is not implemented but is required for interface conformance

func (*FakeEC2Impl) DescribeVolumes 

func (ec2i *FakeEC2Impl) DescribeVolumes(request *ec2.DescribeVolumesInput) ([]*ec2.Volume, error)

DescribeVolumes is not implemented but is required for interface conformance

func (*FakeEC2Impl) DescribeVpcs 

func (ec2i *FakeEC2Impl) DescribeVpcs(request *ec2.DescribeVpcsInput) (*ec2.DescribeVpcsOutput, error)

DescribeVpcs returns fake VPC descriptions

func (*FakeEC2Impl) DetachVolume 

func (ec2i *FakeEC2Impl) DetachVolume(request *ec2.DetachVolumeInput) (resp *ec2.VolumeAttachment, err error)

DetachVolume is not implemented but is required for interface conformance

func (*FakeEC2Impl) ModifyInstanceAttribute 

func (ec2i *FakeEC2Impl) ModifyInstanceAttribute(request *ec2.ModifyInstanceAttributeInput) (*ec2.ModifyInstanceAttributeOutput, error)

ModifyInstanceAttribute is not implemented but is required for interface conformance

func (*FakeEC2Impl) ModifyVolume 

func (ec2i *FakeEC2Impl) ModifyVolume(*ec2.ModifyVolumeInput) (*ec2.ModifyVolumeOutput, error)

ModifyVolume is not implemented but is required for interface conformance

func (*FakeEC2Impl) RemoveRouteTables 

func (ec2i *FakeEC2Impl) RemoveRouteTables()

RemoveRouteTables clears route tables on client

func (*FakeEC2Impl) RemoveSubnets 

func (ec2i *FakeEC2Impl) RemoveSubnets()

RemoveSubnets clears subnets on client

func (*FakeEC2Impl) RevokeSecurityGroupIngress 

func (ec2i *FakeEC2Impl) RevokeSecurityGroupIngress(*ec2.RevokeSecurityGroupIngressInput) (*ec2.RevokeSecurityGroupIngressOutput, error)

RevokeSecurityGroupIngress is not implemented but is required for interface conformance

type FakeELB 

type FakeELB struct {
	// contains filtered or unexported fields
}

FakeELB is a fake ELB client used for testing

func (*FakeELB) AddTags 

func (elb *FakeELB) AddTags(input *elb.AddTagsInput) (*elb.AddTagsOutput, error)

AddTags is not implemented but is required for interface conformance

func (*FakeELB) ApplySecurityGroupsToLoadBalancer 

func (elb *FakeELB) ApplySecurityGroupsToLoadBalancer(*elb.ApplySecurityGroupsToLoadBalancerInput) (*elb.ApplySecurityGroupsToLoadBalancerOutput, error)

ApplySecurityGroupsToLoadBalancer is not implemented but is required for interface conformance

func (*FakeELB) AttachLoadBalancerToSubnets 

func (elb *FakeELB) AttachLoadBalancerToSubnets(*elb.AttachLoadBalancerToSubnetsInput) (*elb.AttachLoadBalancerToSubnetsOutput, error)

AttachLoadBalancerToSubnets is not implemented but is required for interface conformance

func (*FakeELB) ConfigureHealthCheck 

func (elb *FakeELB) ConfigureHealthCheck(*elb.ConfigureHealthCheckInput) (*elb.ConfigureHealthCheckOutput, error)

ConfigureHealthCheck is not implemented but is required for interface conformance

func (*FakeELB) CreateLoadBalancer 

func (elb *FakeELB) CreateLoadBalancer(*elb.CreateLoadBalancerInput) (*elb.CreateLoadBalancerOutput, error)

CreateLoadBalancer is not implemented but is required for interface conformance

func (*FakeELB) CreateLoadBalancerListeners 

func (elb *FakeELB) CreateLoadBalancerListeners(*elb.CreateLoadBalancerListenersInput) (*elb.CreateLoadBalancerListenersOutput, error)

CreateLoadBalancerListeners is not implemented but is required for interface conformance

func (*FakeELB) CreateLoadBalancerPolicy 

func (elb *FakeELB) CreateLoadBalancerPolicy(*elb.CreateLoadBalancerPolicyInput) (*elb.CreateLoadBalancerPolicyOutput, error)

CreateLoadBalancerPolicy is not implemented but is required for interface conformance

func (*FakeELB) DeleteLoadBalancer 

func (elb *FakeELB) DeleteLoadBalancer(input *elb.DeleteLoadBalancerInput) (*elb.DeleteLoadBalancerOutput, error)

DeleteLoadBalancer is not implemented but is required for interface conformance

func (*FakeELB) DeleteLoadBalancerListeners 

func (elb *FakeELB) DeleteLoadBalancerListeners(*elb.DeleteLoadBalancerListenersInput) (*elb.DeleteLoadBalancerListenersOutput, error)

DeleteLoadBalancerListeners is not implemented but is required for interface conformance

func (*FakeELB) DeregisterInstancesFromLoadBalancer 

func (elb *FakeELB) DeregisterInstancesFromLoadBalancer(*elb.DeregisterInstancesFromLoadBalancerInput) (*elb.DeregisterInstancesFromLoadBalancerOutput, error)

DeregisterInstancesFromLoadBalancer is not implemented but is required for interface conformance

func (*FakeELB) DescribeLoadBalancerAttributes 

func (elb *FakeELB) DescribeLoadBalancerAttributes(*elb.DescribeLoadBalancerAttributesInput) (*elb.DescribeLoadBalancerAttributesOutput, error)

DescribeLoadBalancerAttributes is not implemented but is required for interface conformance

func (*FakeELB) DescribeLoadBalancerPolicies 

func (elb *FakeELB) DescribeLoadBalancerPolicies(input *elb.DescribeLoadBalancerPoliciesInput) (*elb.DescribeLoadBalancerPoliciesOutput, error)

DescribeLoadBalancerPolicies is not implemented but is required for interface conformance

func (*FakeELB) DescribeLoadBalancers 

func (elb *FakeELB) DescribeLoadBalancers(input *elb.DescribeLoadBalancersInput) (*elb.DescribeLoadBalancersOutput, error)

DescribeLoadBalancers is not implemented but is required for interface conformance

func (*FakeELB) DetachLoadBalancerFromSubnets 

func (elb *FakeELB) DetachLoadBalancerFromSubnets(*elb.DetachLoadBalancerFromSubnetsInput) (*elb.DetachLoadBalancerFromSubnetsOutput, error)

DetachLoadBalancerFromSubnets is not implemented but is required for interface conformance

func (*FakeELB) ModifyLoadBalancerAttributes 

func (elb *FakeELB) ModifyLoadBalancerAttributes(*elb.ModifyLoadBalancerAttributesInput) (*elb.ModifyLoadBalancerAttributesOutput, error)

ModifyLoadBalancerAttributes is not implemented but is required for interface conformance

func (*FakeELB) RegisterInstancesWithLoadBalancer 

func (elb *FakeELB) RegisterInstancesWithLoadBalancer(*elb.RegisterInstancesWithLoadBalancerInput) (*elb.RegisterInstancesWithLoadBalancerOutput, error)

RegisterInstancesWithLoadBalancer is not implemented but is required for interface conformance

func (*FakeELB) SetLoadBalancerPoliciesForBackendServer 

func (elb *FakeELB) SetLoadBalancerPoliciesForBackendServer(*elb.SetLoadBalancerPoliciesForBackendServerInput) (*elb.SetLoadBalancerPoliciesForBackendServerOutput, error)

SetLoadBalancerPoliciesForBackendServer is not implemented but is required for interface conformance

func (*FakeELB) SetLoadBalancerPoliciesOfListener 

func (elb *FakeELB) SetLoadBalancerPoliciesOfListener(input *elb.SetLoadBalancerPoliciesOfListenerInput) (*elb.SetLoadBalancerPoliciesOfListenerOutput, error)

SetLoadBalancerPoliciesOfListener is not implemented but is required for interface conformance

type FakeELBV2 

type FakeELBV2 struct {
	// contains filtered or unexported fields
}

FakeELBV2 is a fake ELBV2 client used for testing

func (*FakeELBV2) AddTags 

func (elb *FakeELBV2) AddTags(input *elbv2.AddTagsInput) (*elbv2.AddTagsOutput, error)

AddTags is not implemented but is required for interface conformance

func (*FakeELBV2) CreateListener 

func (elb *FakeELBV2) CreateListener(*elbv2.CreateListenerInput) (*elbv2.CreateListenerOutput, error)

CreateListener is not implemented but is required for interface conformance

func (*FakeELBV2) CreateLoadBalancer 

func (elb *FakeELBV2) CreateLoadBalancer(*elbv2.CreateLoadBalancerInput) (*elbv2.CreateLoadBalancerOutput, error)

CreateLoadBalancer is not implemented but is required for interface conformance

func (*FakeELBV2) CreateTargetGroup 

func (elb *FakeELBV2) CreateTargetGroup(*elbv2.CreateTargetGroupInput) (*elbv2.CreateTargetGroupOutput, error)

CreateTargetGroup is not implemented but is required for interface conformance

func (*FakeELBV2) DeleteListener 

func (elb *FakeELBV2) DeleteListener(*elbv2.DeleteListenerInput) (*elbv2.DeleteListenerOutput, error)

DeleteListener is not implemented but is required for interface conformance

func (*FakeELBV2) DeleteLoadBalancer 

func (elb *FakeELBV2) DeleteLoadBalancer(*elbv2.DeleteLoadBalancerInput) (*elbv2.DeleteLoadBalancerOutput, error)

DeleteLoadBalancer is not implemented but is required for interface conformance

func (*FakeELBV2) DeleteTargetGroup 

func (elb *FakeELBV2) DeleteTargetGroup(*elbv2.DeleteTargetGroupInput) (*elbv2.DeleteTargetGroupOutput, error)

DeleteTargetGroup is not implemented but is required for interface conformance

func (*FakeELBV2) DeregisterTargets 

func (elb *FakeELBV2) DeregisterTargets(*elbv2.DeregisterTargetsInput) (*elbv2.DeregisterTargetsOutput, error)

DeregisterTargets is not implemented but is required for interface conformance

func (*FakeELBV2) DescribeListeners 

func (elb *FakeELBV2) DescribeListeners(*elbv2.DescribeListenersInput) (*elbv2.DescribeListenersOutput, error)

DescribeListeners is not implemented but is required for interface conformance

func (*FakeELBV2) DescribeLoadBalancerAttributes 

func (elb *FakeELBV2) DescribeLoadBalancerAttributes(*elbv2.DescribeLoadBalancerAttributesInput) (*elbv2.DescribeLoadBalancerAttributesOutput, error)

DescribeLoadBalancerAttributes is not implemented but is required for interface conformance

func (*FakeELBV2) DescribeLoadBalancers 

func (elb *FakeELBV2) DescribeLoadBalancers(*elbv2.DescribeLoadBalancersInput) (*elbv2.DescribeLoadBalancersOutput, error)

DescribeLoadBalancers is not implemented but is required for interface conformance

func (*FakeELBV2) DescribeTargetGroupAttributes 

func (elb *FakeELBV2) DescribeTargetGroupAttributes(*elbv2.DescribeTargetGroupAttributesInput) (*elbv2.DescribeTargetGroupAttributesOutput, error)

DescribeTargetGroupAttributes is not implemented but is required for interface conformance

func (*FakeELBV2) DescribeTargetGroups 

func (elb *FakeELBV2) DescribeTargetGroups(*elbv2.DescribeTargetGroupsInput) (*elbv2.DescribeTargetGroupsOutput, error)

DescribeTargetGroups is not implemented but is required for interface conformance

func (*FakeELBV2) DescribeTargetHealth 

func (elb *FakeELBV2) DescribeTargetHealth(input *elbv2.DescribeTargetHealthInput) (*elbv2.DescribeTargetHealthOutput, error)

DescribeTargetHealth is not implemented but is required for interface conformance

func (*FakeELBV2) ModifyListener 

func (elb *FakeELBV2) ModifyListener(*elbv2.ModifyListenerInput) (*elbv2.ModifyListenerOutput, error)

ModifyListener is not implemented but is required for interface conformance

func (*FakeELBV2) ModifyLoadBalancerAttributes 

func (elb *FakeELBV2) ModifyLoadBalancerAttributes(*elbv2.ModifyLoadBalancerAttributesInput) (*elbv2.ModifyLoadBalancerAttributesOutput, error)

ModifyLoadBalancerAttributes is not implemented but is required for interface conformance

func (*FakeELBV2) ModifyTargetGroup 

func (elb *FakeELBV2) ModifyTargetGroup(*elbv2.ModifyTargetGroupInput) (*elbv2.ModifyTargetGroupOutput, error)

ModifyTargetGroup is not implemented but is required for interface conformance

func (*FakeELBV2) ModifyTargetGroupAttributes 

func (elb *FakeELBV2) ModifyTargetGroupAttributes(*elbv2.ModifyTargetGroupAttributesInput) (*elbv2.ModifyTargetGroupAttributesOutput, error)

ModifyTargetGroupAttributes is not implemented but is required for interface conformance

func (*FakeELBV2) RegisterTargets 

func (elb *FakeELBV2) RegisterTargets(*elbv2.RegisterTargetsInput) (*elbv2.RegisterTargetsOutput, error)

RegisterTargets is not implemented but is required for interface conformance

func (*FakeELBV2) WaitUntilLoadBalancersDeleted 

func (elb *FakeELBV2) WaitUntilLoadBalancersDeleted(*elbv2.DescribeLoadBalancersInput) error

WaitUntilLoadBalancersDeleted is not implemented but is required for interface conformance

type FakeKMS 

type FakeKMS struct {
	// contains filtered or unexported fields
}

FakeKMS is a fake KMS client used for testing

func (*FakeKMS) DescribeKey 

func (kms *FakeKMS) DescribeKey(*kms.DescribeKeyInput) (*kms.DescribeKeyOutput, error)

DescribeKey is not implemented but is required for interface conformance

type FakeMetadata 

type FakeMetadata struct {
	// contains filtered or unexported fields
}

FakeMetadata is a fake EC2 metadata service client used for testing

func (*FakeMetadata) GetMetadata 

func (m *FakeMetadata) GetMetadata(key string) (string, error)

GetMetadata returns fake EC2 metadata for testing

type IPPermissionSet 

type IPPermissionSet map[string]*ec2.IpPermission

IPPermissionSet maps IP strings of strings to EC2 IpPermissions

func NewIPPermissionSet 

func NewIPPermissionSet(items ...*ec2.IpPermission) IPPermissionSet

NewIPPermissionSet creates a new IPPermissionSet

func (IPPermissionSet) Difference 

func (s IPPermissionSet) Difference(s2 IPPermissionSet) IPPermissionSet

Difference returns a set of objects that are not in s2 For example: s1 = {a1, a2, a3} s2 = {a1, a2, a4, a5} s1.Difference(s2) = {a3} s2.Difference(s1) = {a4, a5}

func (IPPermissionSet) Equal 

func (s IPPermissionSet) Equal(s2 IPPermissionSet) bool

Equal returns true if and only if s is equal (as a set) to s2. Two sets are equal if their membership is identical. (In practice, this means same elements, order doesn't matter)

func (IPPermissionSet) Insert 

func (s IPPermissionSet) Insert(items ...*ec2.IpPermission)

Insert adds items to the set.

func (IPPermissionSet) IsSuperset 

func (s IPPermissionSet) IsSuperset(s2 IPPermissionSet) bool

IsSuperset returns true if and only if s is a superset of s2.

func (IPPermissionSet) Len 

func (s IPPermissionSet) Len() int

Len returns the size of the set.

func (IPPermissionSet) List 

func (s IPPermissionSet) List() []*ec2.IpPermission

List returns the contents as a slice. Order is not defined.

func (IPPermissionSet) Ungroup 

func (s IPPermissionSet) Ungroup() IPPermissionSet

Ungroup splits permissions out into individual permissions EC2 will combine permissions with the same port but different SourceRanges together, for example We ungroup them so we can process them

type InstanceGroupInfo 

type InstanceGroupInfo interface {
	// The number of instances currently running under control of this group
	CurrentSize() (int, error)
}

InstanceGroupInfo is returned by InstanceGroups.Describe, and exposes information about the group.

func DescribeInstanceGroup 

func DescribeInstanceGroup(asg ASG, instanceGroupName string) (InstanceGroupInfo, error)

DescribeInstanceGroup gets info about the specified instancegroup Exported so it can be used by the e2e tests, which don't want to instantiate a full cloudprovider.

type InstanceGroups 

type InstanceGroups interface {
	// Set the size to the fixed size
	ResizeInstanceGroup(instanceGroupName string, size int) error
	// Queries the cloud provider for information about the specified instance group
	DescribeInstanceGroup(instanceGroupName string) (InstanceGroupInfo, error)
}

InstanceGroups is an interface for managing cloud-managed instance groups / autoscaling instance groups TODO: Allow other clouds to implement this

type KMS 

type KMS interface {
	DescribeKey(*kms.DescribeKeyInput) (*kms.DescribeKeyOutput, error)
}

KMS is a simple pass-through of the Key Management Service client interface, which allows for testing.

type KubernetesVolumeID 

type KubernetesVolumeID string

KubernetesVolumeID represents the id for a volume in the kubernetes API; a few forms are recognized:

  • aws://<zone>/<awsVolumeId>
  • aws:///<awsVolumeId>
  • <awsVolumeId>

func (KubernetesVolumeID) MapToAWSVolumeID 

func (name KubernetesVolumeID) MapToAWSVolumeID() (EBSVolumeID, error)

MapToAWSVolumeID extracts the EBSVolumeID from the KubernetesVolumeID

type ResourceLifecycle 

type ResourceLifecycle string

ResourceLifecycle is the cluster lifecycle state used in tagging

type Services 

type Services interface {
	Compute(region string) (EC2, error)
	LoadBalancing(region string) (ELB, error)
	LoadBalancingV2(region string) (ELBV2, error)
	Autoscaling(region string) (ASG, error)
	Metadata() (EC2Metadata, error)
	KeyManagement(region string) (KMS, error)
}

Services is an abstraction over AWS, to allow mocking/other implementations

type VolumeOptions 

type VolumeOptions struct {
	CapacityGB       int
	Tags             map[string]string
	VolumeType       string
	AvailabilityZone string
	// IOPSPerGB x CapacityGB will give total IOPS of the volume to create.
	// Calculated total IOPS will be capped at MaxTotalIOPS.
	IOPSPerGB int
	Encrypted bool
	// fully qualified resource name to the key to use for encryption.
	// example: arn:aws:kms:us-east-1:012345678910:key/abcd1234-a123-456a-a12b-a123b4cd56ef
	KmsKeyID string
}

VolumeOptions specifies capacity and tags for a volume.

type Volumes 

type Volumes interface {
	// Attach the disk to the node with the specified NodeName
	// nodeName can be empty to mean "the instance on which we are running"
	// Returns the device (e.g. /dev/xvdf) where we attached the volume
	AttachDisk(diskName KubernetesVolumeID, nodeName types.NodeName) (string, error)
	// Detach the disk from the node with the specified NodeName
	// nodeName can be empty to mean "the instance on which we are running"
	// Returns the device where the volume was attached
	DetachDisk(diskName KubernetesVolumeID, nodeName types.NodeName) (string, error)

	// Create a volume with the specified options
	CreateDisk(volumeOptions *VolumeOptions) (volumeName KubernetesVolumeID, err error)
	// Delete the specified volume
	// Returns true iff the volume was deleted
	// If the was not found, returns (false, nil)
	DeleteDisk(volumeName KubernetesVolumeID) (bool, error)

	// Get labels to apply to volume on creation
	GetVolumeLabels(volumeName KubernetesVolumeID) (map[string]string, error)

	// Get volume's disk path from volume name
	// return the device path where the volume is attached
	GetDiskPath(volumeName KubernetesVolumeID) (string, error)

	// Check if the volume is already attached to the node with the specified NodeName
	DiskIsAttached(diskName KubernetesVolumeID, nodeName types.NodeName) (bool, error)

	// Check if disks specified in argument map are still attached to their respective nodes.
	DisksAreAttached(map[types.NodeName][]KubernetesVolumeID) (map[types.NodeName]map[KubernetesVolumeID]bool, error)

	// Expand the disk to new size
	ResizeDisk(diskName KubernetesVolumeID, oldSize resource.Quantity, newSize resource.Quantity) (resource.Quantity, error)
}

Volumes is an interface for managing cloud-provisioned volumes TODO: Allow other clouds to implement this

Source Files

View all Source files

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL
go.dev uses cookies from Google to deliver and enhance the quality of its services and to analyze traffic. Learn more.