pigeon

module
v1.12.0 Latest Latest
Warning

This package is not in the latest version of its module.

 Go to latest Published: Jun 13, 2024 License: Apache-2.0

README

Pigeon

Paloma

A Golang cross-chain message relayer system for Paloma validators to deliver messages to any blockchain.

For Crosschain software engineers that want simultaneous control of multiple smart contracts, on any blockchain, Paloma is decentralized and consensus-driven message delivery, fast state awareness, low cost state computation, and powerful attestation system that enables scalable, crosschain, smart contract execution with any data source.

Table of Contents

Talk to us

We have active, helpful communities on Twitter and Telegram.

Releases

See Release procedure for more information about the release model.

Active Networks

  • Paloma Testnest paloma-testnet-16 (May 23, 2024)
  • Paloma Mainnet tumbler (April 22, 2024)
  • Arbitrum Mainnet (relay)
  • Base Mainnet (relay)
  • Blast Mainnet (relay)
  • Binance Smart Chain Mainnet (relay)
  • Ethereum Mainnet (relay)
  • Gnosis Mainnet (relay)
  • Optimism Mainnet (relay)
  • Polygon Mainnet (relay)

ISSUES

This repo does not accept issues. Please use https://github.com/palomachain/paloma/issues to submit issues and add pigeon label!

Install

If you are upgrading from a prior tesntet confirm that you added the health-check-port: 5757 to your pigeon yaml configuration file and upgrade the paloma chain-id field to paloma-testnet-16 for Testnet or tumbler for Mainnet (see example below).

Note

If you're joining while testnet didn't boot up yet you may see a log line saying not staking. waiting. That's OK. If you see this after the chains starts producing blocks, then it means that your validator has been jailed.

Note

Some have seen errors with GLIBC version differences with the downloaded binaries. This is caused by a difference in the libraries of the host that built the binary and the host running the binary.

If you experience these errors, please pull down the code and build it, rather than downloading the prebuilt binary

To get the latest prebuilt pigeon binary

wget -O - https://github.com/palomachain/pigeon/releases/download/v1.12.0/pigeon_Linux_x86_64.tar.gz  | \
  sudo tar -C /usr/local/bin -xvzf - pigeon
sudo chmod +x /usr/local/bin/pigeon

mkdir ~/.pigeon

To build pigeon using latest

git clone https://github.com/palomachain/pigeon.git
cd pigeon
git checkout v1.12.0
make build
sudo mv ./build/pigeon /usr/local/bin/pigeon

mkdir ~/.pigeon

If you're upgrading to the most recent version, you will need to stop pigeond before removing the old binary and copying the new binary into place.

Set up your EVM Keys. Don't forget your passwords

Create a new key

Ethereum Mainnet (eth-main)

pigeon evm keys generate-new ~/.pigeon/keys/evm/eth-main

Binance Smart Chain Mainnet (bnb-main)

pigeon evm keys generate-new ~/.pigeon/keys/evm/bnb-main

Polygon Mainnet (matic-main)

pigeon evm keys generate-new ~/.pigeon/keys/evm/matic-main

Optimism Mainnet (op-main)

pigeon evm keys generate-new ~/.pigeon/keys/evm/op-main

Base Mainnet (base-main)

pigeon evm keys generate-new ~/.pigeon/keys/evm/base-main

Arbitrum Mainnet (arbitrum-main)

pigeon evm keys generate-new ~/.pigeon/keys/evm/arbitrum-main

Gnosis Mainnet (gnosis-main)

pigeon evm keys generate-new ~/.pigeon/keys/evm/gnosis-main

Blast Mainnet (blast-main)

pigeon evm keys generate-new ~/.pigeon/keys/evm/blast-main

or import existing you existing Ethereum evm private keys

Ethereum Mainnet (eth-main)

pigeon evm keys import ~/.pigeon/keys/evm/eth-main

Binance Smart Chain Mainnet (bnb-main)

pigeon evm keys import ~/.pigeon/keys/evm/bnb-main

Polygon Mainnet (matic-main)

pigeon evm keys import ~/.pigeon/keys/evm/matic-main

Optimism Mainnet (op-main)

pigeon evm keys import ~/.pigeon/keys/evm/op-main

Base Mainnet (base-main)

pigeon evm keys import ~/.pigeon/keys/evm/base-main

Arbitrum Mainnet (arbitrum-main)

pigeon evm keys import ~/.pigeon/keys/evm/arbitrum-main

Gnosis Mainnet (gnosis-main)

pigeon evm keys import ~/.pigeon/keys/evm/gnosis-main

Blast Mainnet (blast-main)

pigeon evm keys import ~/.pigeon/keys/evm/blast-main

Config setup

IMPORTANT VALIDATOR NOTE: gas-adjustment is important in your pigeon settings. The gas adjustment values in the example below are set to ensure that your relay is able to increase gas required during periods of high congestion on the target chain. We propose that for tx-type: 2, gas-adjustment is set to 2 except for bnb-main chain. However, given that Paloma assigns messages based on pigeon performance, make sure your gas adjustment for each target chain maximizes your message delivery, while minimizing your relay costs.

Paloma supported chains on tumbler mainnet as of January 5, 2024

Validators joining the Paloma network for the first time will need to fund the minimum onchain gas-fee balances to be included in the validator set. All validators must support all chains for relaying. All validators must maintain the minimum balance required for each target chain. Below are the list of supported chains and their minimums.

Chain Name Paloma Chain-ID Native Token Minimum Balance Required Governance Proposal
BNB Chain / Binance Smart Chain bnb-main BNB 0.005 BNB PIP 27 - Paloma Mainnet Support for BNB Chain
Ethereum eth-main ETH 0.005 ETH PIP 28 - Paloma Compass-EVM and Mainnet Support for Ethereum Mainnet
Polygon MATIC matic-main MATIC 0.005 MATIC PIP 34 - Paloma Messenger Mainnet Validator Support for Polygon Mainnet
Optimism op-main ETH 0.005 ETH PIP 36 - Paloma Mainnet Support for Optimistic EVM blockchain, Optimism
Base base-main ETH 0.001 ETH PIP 37 - Paloma Mainnet Support for Base EVM blockchain
Gnosis base-main xDAI 10 xDAI PIP 46 - Paloma Mainnet Support for Gnosis EVM blockchain
Arbitrum arbitrum-main ETH 0.005 ETH PIP 52 - Paloma Mainnet Support for Arbitrum EVM blockchain
BLAST blast-main ETH 0.005 ETH PIP-55 - Paloma Messenger Support for BLAST!
Configuration updates

Please make sure you restart Pigeon after making changes to your configuration files for the updates to come into effect.

Make sure your Paloma Cosmos-SDK keys are stored and available on your environment.

palomad keys add "$VALIDATOR" --recover

Set the VALIDATOR env variable

export VALIDATOR="$(palomad keys list --list-names | head -n1)"

Create configuration file here ~/.pigeon/config.yaml

loop-timeout: 5s
health-check-port: 5757

paloma:
  chain-id: tumbler
  call-timeout: 20s
  keyring-dir: ~/.paloma
  keyring-pass-env-name: PALOMA_KEYRING_PASS
  keyring-type: os
  validator-key: ${VALIDATOR}
  base-rpc-url: http://localhost:26657
  gas-adjustment: 3.0
  gas-prices: 0.01ugrain
  account-prefix: paloma

evm:
  eth-main:
    chain-id: 1
    base-rpc-url: ${ETH_RPC_URL}
    keyring-pass-env-name: ETH_PASSWORD
    signing-key: ${ETH_SIGNING_KEY}
    keyring-dir: ~/.pigeon/keys/evm/eth-main
    gas-adjustment: 2
    tx-type: 2

  bnb-main:
    chain-id: 56
    base-rpc-url: ${BNB_RPC_URL}
    keyring-pass-env-name: BNB_PASSWORD
    signing-key: ${BNB_SIGNING_KEY}
    keyring-dir: ~/.pigeon/keys/evm/bnb-main
    gas-adjustment: 1
    tx-type: 0

  matic-main:
    chain-id: 137
    base-rpc-url: ${MATIC_RPC_URL}
    keyring-pass-env-name: MATIC_PASSWORD
    signing-key: ${MATIC_SIGNING_KEY}
    keyring-dir: ~/.pigeon/keys/evm/matic-main
    gas-adjustment: 2
    tx-type: 2
  
  op-main:
    chain-id: 10
    base-rpc-url: ${OP_RPC_URL}
    keyring-pass-env-name: OP_PASSWORD
    signing-key: ${OP_SIGNING_KEY}
    keyring-dir: /root/.pigeon/keys/evm/op-main
    gas-adjustment: 2
    tx-type: 2

  base-main:
    chain-id: 8453
    base-rpc-url: ${BASE_RPC_URL}
    keyring-pass-env-name: BASE_PASSWORD
    signing-key: ${BASE_SIGNING_KEY}
    keyring-dir: /root/.pigeon/keys/evm/base-main
    gas-adjustment: 2
    tx-type: 2

  arbitrum-main:
    chain-id: 42161
    base-rpc-url: ${ARB_RPC_URL}
    keyring-pass-env-name: ARB_PASSWORD
    signing-key: ${ARB_SIGNING_KEY}
    keyring-dir: /root/.pigeon/keys/evm/arbitrum-main
    gas-adjustment: 2
    tx-type: 2

 gnosis-main:
    chain-id: 100
    base-rpc-url: ${GNOSIS_RPC_URL}
    keyring-pass-env-name: GNOSIS_PASSWORD
    signing-key: ${GNOSIS_SIGNING_KEY}
    keyring-dir: /root/.pigeon/keys/evm/gnosis-main
    gas-adjustment: 2
    tx-type: 2

  blast-main:
    chain-id: 81457
    base-rpc-url: ${BLAST_RPC_URL}
    keyring-pass-env-name: BLAST_PASSWORD
    signing-key: ${BLAST_SIGNING_KEY}
    keyring-dir: ~/.pigeon/keys/evm/blast-main
    gas-adjustment: 2
    tx-type: 2
Support for multiple signing keys

By default, Pigeon will use your validator key to sign any transactions sent to Paloma. In high throughput environments, this may lead to account sequence mismatch errors. It's possible to define more than one signing key to be used in rotation to combat this issue. In order to do so, you will need to create a number of new keys and register them with Pigeon like this:

# First, create a number of new keys. You may create an arbitrary amount of keys.
palomad keys add pigeon-operator-alpha
palomad keys add pigeon-operator-bravo
palomad keys add pigeon-operator-charlie

# Second, your new addresses will need to receive an active feegrant from your validator address.
# This step is very important. It's not enough to simply fund those addresses manually.
# The active feegrant is considered a "permission" to send transactions from your validator address".
palomad tx feegrant grant $VALIDATOR_ADDRESS $(palomad keys show pigeon-operator-alpha-$(hostname) -a) --fees 500ugrain -y
palomad tx feegrant grant $VALIDATOR_ADDRESS $(palomad keys show pigeon-operator-bravo-$(hostname) -a) --fees 500ugrain -y
palomad tx feegrant grant $VALIDATOR_ADDRESS $(palomad keys show pigeon-operator-charlie-$(hostname) -a) --fees 500ugrain -y

After creating your signing keys, all you need to do is register them with Pigeon by adding the following to your pigeon config. Make sure to restart the service after making these changes.

paloma:
  signing-keys:
    - pigeon-operator-alpha
    - pigeon-operator-bravo
    - pigeon-operator-charlie

Start pigeon

First pigeon will need some keys:

cat <<EOT >~/.pigeon/env.sh
PALOMA_KEYRING_PASS=<your Paloma key password>
ETH_RPC_URL=<Your Ethereum mainnet RPC URL>
ETH_PASSWORD=<Your ETH Key Password>
ETH_SIGNING_KEY=<Your ETH SIGNING KEY>
BNB_RPC_URL=<Your Binance mainnet RPC URL>
BNB_PASSWORD=<Your BNB Key Password>
BNB_SIGNING_KEY=<Your BNB SIGNING KEY>
MATIC_RPC_URL=<Your Binance mainnet RPC URL>
MATIC_PASSWORD=<Your BNB Key Password>
MATIC_SIGNING_KEY=<Your BNB SIGNING KEY>
BASE_RPC_URL=<Your Base mainnet RPC URL>
BASE_PASSWORD=<Your Base Key Password>
BASE_SIGNING_KEY=<Your Base SIGNING KEY>
GNOSIS_RPC_URL=<Your Gnosis mainnet RPC URL>
GNOSIS_PASSWORD=<Your Gnosis Key Password>
GNOSIS_SIGNING_KEY=<Your Gnosis SIGNING KEY>
ARB_RPC_URL=<Your Arbitrum mainnet RPC URL>
ARB_PASSWORD=<Your Arbitrum Key Password>
ARB_SIGNING_KEY=<Your Arbitrum SIGNING KEY>
BLAST_RPC_URL=<Your Blast mainnet RPC URL>
BLAST_PASSWORD=<Your Blast Key Password>
BLAST_SIGNING_KEY=<Your Blast SIGNING KEY>
OP_RPC_URL=<Your Optimism mainnet RPC URL>
OP_PASSWORD=<Your Optimism Key Password>
OP_SIGNING_KEY=<Your Optimism SIGNING KEY>
VALIDATOR=<VALIDATOR NAME>
EOT

Then we can run pigeon with:

source ~/.pigeon/env.sh
pigeon start
Using systemd

Make sure you have configured .pigeon/env.sh as above. Then create a systemctl configuration:

cat <<EOT >/etc/systemd/system/pigeond.service
[Unit]
Description=Pigeon daemon
After=network-online.target
ConditionPathExists=/usr/local/bin/pigeon

[Service]
Type=simple
Restart=always
RestartSec=5
User=${USER}
WorkingDirectory=~
EnvironmentFile=${HOME}/.pigeon/env.sh
ExecStart=/usr/local/bin/pigeon start
ExecReload=

[Install]
WantedBy=multi-user.target
EOT

Then start our pigeon!

service pigeond start

# Check that it's running successfully:
service pigeond status
# Or watch the logs:
journalctl -u pigeond.service -f -n 100

Definitions and Descriptions of Pigeons Variables

  • for paloma key:
    • keyring-dir
    • right now it's not really super important where this points. The important things for the future is that pigeon needs to send transactions to Paloma using its validator (operator) key!
      • it's best to leave it as is
    • keyring-pass-env-name
      • this one is super important!
      • it is the name of the ENV variable where password to unlock the keyring is stored!
      • you are not writing password here!! You are writing the ENV variable's name where the password is stored.
      • you should obviously use a bit more advanced method than shown here, but here is the example:
        • if the keyring-pass-env-name is set to MY_SUPER_SECRET_PASS then you should provide ENV variable MY_SUPER_SECRET_PASS and store the password there
        • e.g. MY_SUPER_SECRET_PASS=abcd pigeon start
    • keyring-type
      • it should be the same as it's defined for paloma's client. Look under the ~/.paloma/config/client.toml
    • signing-key
      • right now it's again not important which key we are using. It can be any key that has enough balance to submit TXs to Paloma. It's best to use the same key that's set up for the validator.
    • gas-adustment:
      • gas multiplier. The pigeon will estimate the gas to run a TX and then it will multiply it with gas-adjustment (if it's a positive number)
  • for evm -> eth-main:
    • keyring-pass-env-name: same as above for paloma.
    • signing-key
      • address of the key from the keyring used to sign and send TXs to EVM network (one that you got when running pigeon evm keys generate-new from the install section)
    • keyring-dir:
      • a directory where keys to communicate with the EVM network is stored

Directories

Path Synopsis
evm
evm/abi/compass
evm/mocks
mocks
paloma
paloma/mocks
cmd
pigeon
mocks
internal
ethfilter
libchain
liblog
mev
mev/blxr
queue
traits
heartbeat
mocks
util
channels
ion
ion/byop
rotator
slice
time
time/mocks

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL
go.dev uses cookies from Google to deliver and enhance the quality of its services and to analyze traffic. Learn more.