authboss

package module
v2.0.0-rc4+incompatible Latest Latest
Warning

This package is not in the latest version of its module.

 Go to latest Published: Jun 27, 2018 License: MIT Imports: 12 Imported by: 0

README

Authboss

GoDoc Build Status Coverage Status Mail

Authboss is a modular authentication system for the web.

It has several modules that represent authentication and authorization features that are common to websites in general so that you can enable as many as you need, and leave the others out. It makes it easy to plug in authentication to an application and get a lot of functionality for (hopefully) a smaller amount of integration effort.

Why use Authboss?

Every time you'd like to start a new web project, you really want to get to the heart of what you're trying to accomplish very quickly and it would be a sure bet to say one of the systems you're excited about implementing and innovating on is not authentication. In fact it's very much the opposite: it's one of those things that you have to do and one of those things you loathe to do. Authboss is supposed to remove a lot of the tedium that comes with this, as well as a lot of the chances to make mistakes. This allows you to care about what you're intending to do, rather than on ancillary support systems to make it happen.

Here are a few bullet point reasons you might like to try it out:

  • Saves you time (Authboss integration time should be less than re-implementation time)
  • Saves you mistakes (at least using Authboss, people can bug fix as a collective and all benefit)
  • Should integrate with or without any web framework

Getting Started

To get started with Authboss in the simplest way, is to simply create a Config, populate it with the things that are required, and start implementing use cases. The use cases describe what's required to be able to be able to use a particular piece of functionality, or the best practice when implementing a piece of functionality. Please note the app requirements for your application as well integration requirements that follow.

Of course the standard practice of fetching the library is just the beginning:

# Get the latest, keep in mind you should be vendoring with dep or using vgo at this point
# To ensure versions don't get messed up underneath you
go get -u github.com/volatiletech/authboss

Here's a bit of starter code that was stolen from the sample.

ab := authboss.New()

ab.Config.Storage.Server = myDatabaseImplementation
ab.Config.Storage.SessionState = mySessionImplementation
ab.Config.Storage.CookieState = myCookieImplementation

ab.Config.Paths.Mount = "/authboss"
ab.Config.Paths.RootURL = "https://www.example.com/"

// This is using the renderer from: github.com/volatiletech/authboss
ab.Config.Core.ViewRenderer = abrenderer.New("/auth")
// Probably want a MailRenderer here too.

// Set up defaults for basically everything besides the ViewRenderer/MailRenderer in the HTTP stack
defaults.SetCore(&ab.Config, false)

if err := ab.Init(); err != nil {
    panic(err)
}

// Mount the router to a path (this should be the same as the Mount path above)
// mux in this example is a chi router, but it could be anything that can route to
// the Core.Router.
mux.Mount("/authboss", http.StripPrefix("/authboss", ab.Config.Core.Router))

For a more in-depth look you definitely should look at the authboss sample to see what a full implementation looks like. This will probably help you more than any of this documentation.

https://github.com/volatiletech/authboss-sample

App Requirements

Authboss does a lot of things, but it doesn't do some of the important things that are required by a typical authentication system, because it can't guarantee that you're doing many of those things in a different way already, so it punts the responsibility.

CSRF Protection

What this means is you should apply a middleware that can protect the application from crsf attacks or you may be vulnerable. Authboss previously handled this but it took on a dependency that was unnecessary and it complicated the code. Because Authboss does not render views nor consumes data directly from the user, it no longer does this.

Request Throttling

Currently Authboss is vulnerable to brute force attacks because there are no protections on it's endpoints. This again is left up to the creator of the website to protect the whole website at once (as well as Authboss) from these sorts of attacks.

Integration Requirements

In terms of integrating Authboss into your app, the following things must be considered.

Middleware

There are middlewares that are required to be installed in your middleware stack if it's all to function properly, please see Middlewares for more information.

Configuration

There are some required configuration variables that have no sane defaults:

  • Config.Paths.Mount
  • Config.Paths.RootURL
Storage and Core implementations

Everything under Config.Storage and Config.Core are required. however you can optionally use default implementations from the defaults package. This also provides an easy way to share implementations of certain stack pieces (like HTML Form Parsing). As you see in the example above these can be easily initialized with the SetCore method in that package.

The following is a list of storage interfaces, they must be provided by the implementer. Server is a very involved implementation, please see the additional documentation below for more details.

  • Config.Storage.Server
  • Config.Storage.SessionState
  • Config.Storage.CookieState (only for remember me)

The following is a list of the core pieces, these typically are abstracting the HTTP stack. Out of all of these you'll probably be mostly okay with the default implementations in the defaults package but there are two big exceptions to this rule and that's the ViewRenderer and the MailRenderer. For more information please see the use case Rendering Views

  • Config.Core.Router
  • Config.Core.ErrorHandler
  • Config.Core.Responder
  • Config.Core.Redirector
  • Config.Core.BodyReader
  • Config.Core.ViewRenderer
  • Config.Core.MailRenderer
  • Config.Core.Mailer
  • Config.Core.Logger
ServerStorer implementation

The ServerStorer is meant to be upgraded to add capabilities depending on what modules you'd like to use. It starts out by only knowing how to save and load users, but the remember module as an example needs to be able to find users by remember me tokens, so it upgrades to a RememberingServerStorer which adds these abilities.

Your ServerStorer implementation does not need to implement all these additional interfaces unless you're using a module that requires it. See the Use Cases documentation to know what the requirements are.

User implementation

Users in Authboss are represented by the User interface. The user interface is a flexible notion, because it can be upgraded to suit the needs of the various modules.

Initially the User must only be able to Get/Set a PID or primary identifier. This allows the authboss modules to know how to refer to him in the database. The ServerStorer also makes use of this to save/retrieve users.

As mentioned, it can be upgraded, for example suppose now we want to use the confirm module, in that case the e-mail address now becomes a requirement. So the confirm module will attempt to upgrade the user (and panic if it fails) to a ConfirmableUser which supports retrieving and setting of confirm tokens, e-mail addresses, and a confirmed state.

Your User implementation does not need to implement all these additional user interfaces unless you're using a module that requires it. See the Use Cases documentation to know what the requirements are.

Values implementation

The BodyReader interface in the Config returns Validator implementations which can be validated. But much like the storer and user it can be upgraded to add different capabilities.

Typically the way this will look as an implementation is to check the page being requested, switch on that to parse the body in whatever way (msgpack, json, url-encoded, doesn't matter), and produce a struct that has the ability to Validate it's data as well as functions to retrieve the data necessary for the particular valuer required by the module.

Your body reader implementation does not need to implement all valuer types unless you're using a module that requires it. See the Use Cases documentation to know what the requirements are.

Config

The config struct is an important part of Authboss. It's the key to making Authboss do what you want with the implementations you want. Please look at it's code definition as you read the documentation below, it will make much more sense.

Config Struct Documentation

Paths

Paths are the paths that should be redirected to or used in whatever circumstance they describe. Two special paths that are required are Mount and RootURL, without which certain authboss modules will not function correctly.

Modules

Modules are module specific configuration options. They mostly control the behavior of modules. For example RegisterPreserveFields decides a whitelist of fields to allow back into the data to be re-rendered so the user doesn't have to type them in again.

Mail

Mail sending related options.

Storage

These are the implementations of how storage on the server and the client are done in your app. There are no default implementations for these at this time. See the Godoc for more information about what these are.

Core

These are the implementations of the HTTP stack for your app. How do responses render? How are they redirected? How are errors handled?

For most of these there are default implementations implementations from the defaults package available, but not for all. See the package documentation for more information about what's available.

Available Modules

Each module can be turned on simply by importing it and the side-effects take care of the rest. Not all the capabilities of authboss are represented by a module, see Use Cases to view the supported use cases as well as how to use them in your app.

Name Import Path Description
Auth github.com/volatiletech/authboss/auth Database password authentication for users.
Confirm github.com/volatiletech/authboss/confirm Prevents login before e-mail verification.
Expire github.com/volatiletech/authboss/expire Expires a user's login
Lock github.com/volatiletech/authboss/lock Locks user accounts after authentication failures.
Logout github.com/volatiletech/authboss/logout Destroys user sessions for auth/oauth2.
OAuth2 github.com/volatiletech/authboss/oauth2 Provides oauth2 authentication for users.
Recover github.com/volatiletech/authboss/recover Allows for password resets via e-mail.
Register github.com/volatiletech/authboss/register User-initiated account creation.
Remember github.com/volatiletech/authboss/remember Persisting login sessions past session cookie expiry.

Middlewares

The only middleware that's truly required is the LoadClientStateMiddleware, and that's because it enables session and cookie handling for Authboss. Without that, it's not a very useful piece of software.

The remaining middlewares are either the implementation of an entire module (like expire), or a key part of a module. For example you probably wouldn't want to use the lock module without the middleware that would stop a locked user from using an authenticated resource, because then locking wouldn't be useful unless of course you had your own way of dealing with locking, which is why it's only recommended, and not required. Typically you will use the middlewares if you use the module.

Name Requirement Description
LoadClientStateMiddleware Required Enables cookie and session handling
ModuleListMiddleware Optional Inserts a loaded module list into the view data
confirm.Middleware Recommended with confirm Ensures users are confirmed or rejects request
expire.Middleware Required with expire Expires user sessions after an inactive period
lock.Middleware Recommended with lock Rejects requests from locked users
remember.Middleware Recommended with remember Logs a user in from a remember cookie

Use Cases

Get Current User

CurrentUser can be retrieved by calling Authboss.CurrentUser but a pre-requisite is that Authboss.LoadClientState has been called first to load the client state into the request context. This is typically achieved by using the Authboss.LoadClientStateMiddleware, but can be done manually as well.

Reset Password

Updating a user's password is non-trivial for several reasons:

  1. The bcrypt algorithm must have the correct cost, and also be being used.
  2. The user's remember me tokens should all be deleted so that previously authenticated sessions are invalid
  3. Optionally the user should be logged out (not taken care of by UpdatePassword)

In order to do this, we can use the Authboss.UpdatePassword method. This ensures the above facets are taken care of.

If it's also desirable to have the user logged out, please use the following methods to erase all known sessions and cookies from the user.

User Auth via Password

Info and Requirements
Module auth
Pages login
Routes /login
Emails None
Middlewares LoadClientStateMiddleware
ClientStorage Session and Cookie
ServerStorer ServerStorer
User AuthableUser
Values UserValuer
Mailer None

To enable this side-effect import the auth module, and ensure that the requirements above are met. It's very likely that you'd also want to enable the logout module in addition to this.

User Auth via OAuth2

Info and Requirements
Module oauth2
Pages None
Routes /oauth2/{provider}, /oauth2/callback/{provider}
Emails None
Middlewares LoadClientStateMiddleware
ClientStorage Session
ServerStorer OAuth2ServerStorer
User OAuth2User
Values None
Mailer None

This is a tougher implementation than most modules because there's a lot going on. In addition to the requirements stated above, you must also configure the OAuth2Providers in the config struct.

The providers require an oauth2 configuration that's typical for the Go oauth2 package, but in addition to that they need a FindUserDetails method which has to take the token that's retrieved from the oauth2 provider, and call an endpoint that retrieves details about the user (at LEAST user's uid). These parameters are returned in map[string]string form and passed into the OAuth2ServerStorer.

Please see the following documentation for more details:

User Registration

Info and Requirements
Module register
Pages register
Routes /register
Emails None
Middlewares LoadClientStateMiddleware
ClientStorage Session
ServerStorer CreatingServerStorer
User AuthableUser, optionally ArbitraryUser
Values UserValuer, optionally also ArbitraryValuer
Mailer None

Users can self-register for a service using this module. You may optionally want them to confirm themselves, which can be done using the confirm module.

The complications in implementing registrations are around the RegisterPreserveFields. This is to help in the case where a user fills out all these registration details, and then say enters a password which doesn't mean minimum requirements and it fails during validation. These preserve fields should stop the user from having to type in all that data again (it's a whitelist). This must be used in conjuction with ArbitraryValuer.GetValues() and is described more on the configuration options and the Valuer types themselves.

Confirming Registrations

Info and Requirements
Module confirm
Pages confirm
Routes /confirm
Emails confirm_html, confirm_txt
Middlewares LoadClientStateMiddleware, confirm.Middleware
ClientStorage Session
ServerStorer ConfirmingServerStorer
User ConfirmableUser
Values ConfirmValuer
Mailer Required

Confirming registrations via e-mail can be done with this module (whether or not done via the register module).

A hook on register kicks off the start of a confirmation which sends an e-mail with a token for the user. When the user re-visits the page, the BodyReader must read the token and return a type that can return the token.

Confirmations carry two values in the database to prevent a timing attack. The selector and the verifier, always make sure in the ConfirmingServerStorer you're searching by the selector and not the verifier.

Password Recovery

Info and Requirements
Module recover
Pages recover_start, recover_middle (not used for renders, only values), recover_end
Routes /recover, /recover/end
Emails recover_html, recover_txt
Middlewares LoadClientStateMiddleware
ClientStorage Session
ServerStorer RecoveringServerStorer
User RecoverableUser
Values RecoverStartValuer, RecoverMiddleValuer, RecoverEndValuer
Mailer Required

The flow for password recovery is that the user is initially shown a page that wants their PID to be entered. The RecoverStartValuer retrieves that on POST to /recover.

An e-mail is sent out, and the user clicks the link inside it and is taken back to /recover/end as a GET, at this point the RecoverMiddleValuer grabs the token and will insert it into the data to be rendered.

They enter their password into the form, and POST to /recover/end which sends the token and the new password which is retrieved by RecoverEndValuer which sets their password and saves them.

Password recovery has two values in the database to prevent a timing attack. The selector and the verifier, always make sure in the RecoveringServerStorer you're searching by the selector and not the verifier.

Remember Me

Info and Requirements
Module remember
Pages None
Routes None
Emails None
Middlewares LoadClientStateMiddleware,
Middlewares LoadClientStateMiddleware, remember.Middleware
ClientStorage Session, Cookies
ServerStorer RememberingServerStorer
User User
Values RememberValuer (not a Validator)
Mailer None

Remember uses cookie storage to log in users without a session via the remember.Middleware. Because of this this middleware should be used high up in the stack, but it also needs to be after the LoadClientStateMiddleware so that client state is available via the authboss mechanisms.

There is an intricacy to the RememberingServerStorer, it doesn't use the User struct at all, instead it simply instructs the storer to save tokens to a pid and recall them just the same. Typically in most databases this will require a separate table, though you could implement using pg arrays or something as well.

A user who is logged in via Remember tokens is also considered "half-authed" which is a session key that you can query to check to see if a user should have full rights to more sensitive data, if they are half-authed and they want to change their user details for example you may want to force them to go to the login screen and put in their password to get a full auth first.

Locking Users

Info and Requirements
Module lock
Pages None
Routes None
Emails None
Middlewares LoadClientStateMiddleware, lock.Middleware
ClientStorage Session
ServerStorer ServerStorer
User LockableUser
Values None
Mailer None

Lock ensures that a user's account becomes locked if authentication (both auth and oauth2) are failed enough times.

The middleware protects resources from locked users, without it, there is no point to this module. You should put in front of any resource that requires a login to function.

Expiring User Sessions

Info and Requirements
Module expire
Pages None
Routes None
Emails None
Middlewares LoadClientStateMiddleware, expire.Middleware
ClientStorage Session
ServerStorer None
User User
Values None
Mailer None

Expire simply uses sessions to track when the last action of a user is, if that action is longer than configured then the session is deleted and the user removed from the request context.

This middleware should at a high level to ensure that "activity" is logged properly, as well as any middlewares down the chain do not attempt to do anything with the user before it's removed from the request context.

Rendering Views

The authboss rendering system is simple. It's defined by one interface: Renderer

The renderer knows how to load templates, and how to render them with some data and that's it. So let's examine the most common view types that you might want to use.

HTML Views

When your app is a traditional web application and is generating it's HTML serverside using templates this becomes a small wrapper on top of your rendering setup. For example if you're using html/template then you could just use template.New() inside the Load() method and store that somewhere and call template.Execute() in the Render() method.

There is also a very basic renderer: Authboss Renderer which has some very ugly built in views and the ability to override them with your own if you don't want to integrate your own rendering system into that interface.

JSON Views

If you're building an API that's mostly backed by a javascript front-end, then you'll probably want to use a renderer that returns JSON. There is a simple json renderer available in the defaults package package if you wish to use that.

Data

The most important part about this interface is the data that you have to render. There are several keys that are used throughout authboss that you'll want to render in your views.

They're in the file html_data.go and are constants prefixed with Data. See the documentation in that file for more information on which keys exist and what they contain.

The default responder also happens to collect data from the Request context, and hence this is a great place to inject data you'd like to render (for example data for your html layout, or csrf tokens).

Documentation

Overview

Package authboss is a modular authentication system for the web. It tries to remove as much boilerplate and "hard things" as possible so that each time you start a new web project in Go, you can plug it in, configure and be off to the races without having to think about how to store passwords or remember tokens.

Index

Constants

View Source 
const (
	// SessionKey is the primarily used key by authboss.
	SessionKey = "uid"
	// SessionHalfAuthKey is used for sessions that have been authenticated by
	// the remember module. This serves as a way to force full authentication
	// by denying half-authed users acccess to sensitive areas.
	SessionHalfAuthKey = "halfauth"
	// SessionLastAction is the session key to retrieve the last action of a user.
	SessionLastAction = "last_action"
	// SessionOAuth2State is the xsrf protection key for oauth.
	SessionOAuth2State = "oauth2_state"
	// SessionOAuth2Params is the additional settings for oauth like redirection/remember.
	SessionOAuth2Params = "oauth2_params"

	// CookieRemember is used for cookies and form input names.
	CookieRemember = "rm"

	// FlashSuccessKey is used for storing sucess flash messages on the session
	FlashSuccessKey = "flash_success"
	// FlashErrorKey is used for storing sucess flash messages on the session
	FlashErrorKey = "flash_error"
)
View Source 
const (
	CTXKeyPID  contextKey = "pid"
	CTXKeyUser contextKey = "user"

	CTXKeySessionState contextKey = "session"
	CTXKeyCookieState  contextKey = "cookie"

	// CTXKeyData is a context key for the accumulating
	// map[string]interface{} (authboss.HTMLData) to pass to the
	// renderer
	CTXKeyData contextKey = "data"

	// CTXKeyValues is to pass the data submitted from API request or form
	// along in the context in case modules need it. The only module that needs
	// user information currently is remember so only auth/oauth2 are currently
	// going to use this.
	CTXKeyValues contextKey = "values"
)

CTX Keys for authboss

View Source 
const (
	// DataErr is for one off errors that don't really belong to
	// a particular field. It should be a string.
	DataErr = "error"
	// DataValidation is for validation errors, it should always
	// have been created using the Map() style functions in the
	// validation method so that html/text template users don't
	// struggle in displaying them.
	//
	// It is: map[string][]string, where the key in the map is the field
	// and the []string on the other side is the list of problems
	// with that field.
	//
	// It's also important to note that if the errors that were Map()'d
	// did not implement FieldError or for generic errors
	// the empty string ("") is used as a key in the map for those
	// errors that couldn't be fit to a specific field.
	DataValidation = "errors"
	// DataPreserve preserves fields during large form exercises
	// like user registration so we don't have to re-type safe
	// information like addresses etc.
	//
	// This data looks like map[string]string, and is simply
	// keyed by the field name, and the value is the field value.
	DataPreserve = "preserve"
	// DataModules contains a map[string]bool of which modules are loaded
	// The bool is largely extraneous and can be ignored, if the module is loaded
	// it will be present in the map, if not it will be missing.
	DataModules = "modules"
)

Keys for use in HTMLData that are meaningful

View Source 
const (
	// ConfirmPrefix is prepended to names of confirm fields.
	ConfirmPrefix = "confirm_"
)

Variables

View Source 
var (
	// ErrUserFound should be returned from Create (see ConfirmUser) when the primaryID
	// of the record is found.
	ErrUserFound = errors.New("user found")
	// ErrUserNotFound should be returned from Get when the record is not found.
	ErrUserNotFound = errors.New("user not found")
	// ErrTokenNotFound should be returned from UseToken when the record is not found.
	ErrTokenNotFound = errors.New("token not found")
)

Functions

func DelCookie 

func DelCookie(w http.ResponseWriter, key string)

DelCookie deletes a key-value from the session.

func DelKnownCookie 

func DelKnownCookie(w http.ResponseWriter)

DelKnownCookie deletes all known cookie variables, which can be used to delete remember me pieces.

func DelKnownSession 

func DelKnownSession(w http.ResponseWriter)

DelKnownSession deletes all known session variables, effectively logging a user out.

func DelSession 

func DelSession(w http.ResponseWriter, key string)

DelSession deletes a key-value from the session.

func ErrorMap 

func ErrorMap(e []error) map[string][]string

ErrorMap is a shortcut to change []error into ErrorList and call Map on it since this is a common operation.

func FlashError 

func FlashError(w http.ResponseWriter, r *http.Request) string

FlashError returns FlashError from the session and removes it.

func FlashSuccess 

func FlashSuccess(w http.ResponseWriter, r *http.Request) string

FlashSuccess returns FlashSuccessKey from the session and removes it.

func GetCookie 

func GetCookie(r *http.Request, key string) (string, bool)

GetCookie fetches a value from the session

func GetSession 

func GetSession(r *http.Request, key string) (string, bool)

GetSession fetches a value from the session

func MakeOAuth2PID 

func MakeOAuth2PID(provider, uid string) string

MakeOAuth2PID is used to create a pid for users that don't have an e-mail address or username in the normal system. This allows all the modules to continue to working as intended without having a true primary id. As well as not having to divide the regular and oauth stuff all down the middle.

func MergeDataInRequest 

func MergeDataInRequest(r **http.Request, other HTMLData)

MergeDataInRequest edits the request pointer to point to a new request with a modified context that contains the merged data.

func Middleware 

func Middleware(ab *Authboss) func(http.Handler) http.Handler

Middleware prevents someone from accessing a route by returning a 404 if they are not logged in. This middleware also loads the current user.

func ModuleListMiddleware 

func ModuleListMiddleware(ab *Authboss) func(http.Handler) http.Handler

ModuleListMiddleware puts a map in the data that can be used to provide the renderer with information about which pieces of the views to show. The bool is extraneous, as presence in the map is the indication of wether or not the module is loaded. Data looks like: map[modulename] = true

oauth2 providers are also listed here using the syntax: oauth2.google for an example. Be careful since this doesn't actually mean that the oauth2 module has been loaded so you should do a conditional that checks for both.

func ParseOAuth2PID 

func ParseOAuth2PID(pid string) (provider, uid string, err error)

ParseOAuth2PID returns the uid and provider for a given OAuth2 pid

func ParseOAuth2PIDP 

func ParseOAuth2PIDP(pid string) (provider, uid string)

ParseOAuth2PIDP returns the uid and provider for a given OAuth2 pid

func PutCookie 

func PutCookie(w http.ResponseWriter, key, val string)

PutCookie puts a value into the session

func PutSession 

func PutSession(w http.ResponseWriter, key, val string)

PutSession puts a value into the session

func RegisterModule 

func RegisterModule(name string, m Moduler)

RegisterModule with the core providing all the necessary information to integrate into authboss.

func RegisteredModules 

func RegisteredModules() []string

RegisteredModules returns a list of modules that are currently registered.

Types

type ArbitraryUser 

type ArbitraryUser interface {
	User

	// GetArbitrary is used only to display the arbitrary data back to the user
	// when the form is reset.
	GetArbitrary() (arbitrary map[string]string)
	// PutArbitrary allows arbitrary fields defined by the authboss library
	// consumer to add fields to the user registration piece.
	PutArbitrary(arbitrary map[string]string)
}

ArbitraryUser allows arbitrary data from the web form through. You should definitely only pull the keys you want from the map, since this is unfiltered input from a web request and is an attack vector.

type ArbitraryValuer 

type ArbitraryValuer interface {
	Validator

	GetValues() map[string]string
}

ArbitraryValuer provides the "rest" of the fields that aren't strictly needed for anything in particular, address, secondary e-mail, etc.

There are two important notes about this interface:

1. That this is composed with Validator, as these fields should both be validated and culled of invalid pieces as they will be passed into ArbitraryUser.PutArbitrary()

2. These values will also be culled according to the RegisterPreserveFields whitelist and sent back in the data under the key DataPreserve.

type AuthableUser 

type AuthableUser interface {
	User

	GetPassword() (password string)
	PutPassword(password string)
}

AuthableUser is identified by a password

func MustBeAuthable 

func MustBeAuthable(u User) AuthableUser

MustBeAuthable forces an upgrade to an AuthableUser or panic.

type Authboss 

type Authboss struct {
	Config
	Events *Events
	// contains filtered or unexported fields
}

Authboss contains a configuration and other details for running.

func New 

func New() *Authboss

New makes a new instance of authboss with a default configuration.

func (*Authboss) CurrentUser 

func (a *Authboss) CurrentUser(r *http.Request) (User, error)

CurrentUser retrieves the current user from the session and the database. Before the user is loaded from the database the context key is checked. If the session doesn't have the user ID ErrUserNotFound will be returned.

func (*Authboss) CurrentUserID 

func (a *Authboss) CurrentUserID(r *http.Request) (string, error)

CurrentUserID retrieves the current user from the session.

func (*Authboss) CurrentUserIDP 

func (a *Authboss) CurrentUserIDP(r *http.Request) string

CurrentUserIDP retrieves the current user but panics if it's not available for any reason.

func (*Authboss) CurrentUserP 

func (a *Authboss) CurrentUserP(r *http.Request) User

CurrentUserP retrieves the current user but panics if it's not available for any reason.

func (*Authboss) Email 

func (a *Authboss) Email(ctx context.Context, email Email, ro EmailResponseOptions) error

Email renders the e-mail templates for the given email and sends it using the mailer.

func (*Authboss) Init 

func (a *Authboss) Init(modulesToLoad ...string) error

Init authboss, modules, renderers

func (*Authboss) IsLoaded 

func (a *Authboss) IsLoaded(mod string) bool

IsLoaded checks if a specific module is loaded.

func (*Authboss) LoadClientState 

func (a *Authboss) LoadClientState(w http.ResponseWriter, r *http.Request) (*http.Request, error)

LoadClientState loads the state from sessions and cookies into the ResponseWriter for later use.

func (*Authboss) LoadClientStateMiddleware 

func (a *Authboss) LoadClientStateMiddleware(h http.Handler) http.Handler

LoadClientStateMiddleware wraps all requests with the ClientStateResponseWriter as well as loading the current client state into the context for use.

func (*Authboss) LoadCurrentUser 

func (a *Authboss) LoadCurrentUser(r **http.Request) (User, error)

LoadCurrentUser takes a pointer to a pointer to the request in order to change the current method's request pointer itself to the new request that contains the new context that has the user in it. Calls LoadCurrentUserID so the primary id is also put in the context.

func (*Authboss) LoadCurrentUserID 

func (a *Authboss) LoadCurrentUserID(r **http.Request) (string, error)

LoadCurrentUserID takes a pointer to a pointer to the request in order to change the current method's request pointer itself to the new request that contains the new context that has the pid in it.

func (*Authboss) LoadCurrentUserIDP 

func (a *Authboss) LoadCurrentUserIDP(r **http.Request) string

LoadCurrentUserIDP loads the current user id and panics if it's not found

func (*Authboss) LoadCurrentUserP 

func (a *Authboss) LoadCurrentUserP(r **http.Request) User

LoadCurrentUserP does the same as LoadCurrentUser but panics if the current user is not found.

func (*Authboss) LoadedModules 

func (a *Authboss) LoadedModules() []string

LoadedModules returns a list of modules that are currently loaded.

func (*Authboss) Logger 

func (a *Authboss) Logger(ctx context.Context) FmtLogger

Logger returns an appopriate logger for the context: If context is nil, then it simply returns the configured logger. If context is not nil, then it will attempt to upgrade the configured logger to a ContextLogger, and create a context-specific logger for use.

func (*Authboss) NewResponse 

func (a *Authboss) NewResponse(w http.ResponseWriter) *ClientStateResponseWriter

NewResponse wraps the ResponseWriter with a ClientStateResponseWriter

func (*Authboss) RequestLogger 

func (a *Authboss) RequestLogger(r *http.Request) FmtLogger

RequestLogger returns a request logger if possible, if not it calls Logger which tries to do a ContextLogger, and if that fails it will finally get a normal logger.

func (*Authboss) UpdatePassword 

func (a *Authboss) UpdatePassword(ctx context.Context, user AuthableUser, newPassword string) error

UpdatePassword updates the password field of a user using the same semantics that register/auth do to create and verify passwords. It saves this using the storer.

In addition to that, it also invalidates any remember me tokens, if the storer supports that kind of operation.

If it's also desirable to log the user out, use: authboss.DelKnown(Session|Cookie)

type BodyReader 

type BodyReader interface {
	Read(page string, r *http.Request) (Validator, error)
}

BodyReader reads data from the request and returns it in an abstract form. Typically used to decode JSON responses or Url Encoded request bodies.

The first parameter is the page that this request was made on so we can tell what kind of JSON object or form was present as well as create the proper validation mechanisms.

A typical example of this is taking the request and turning it into a JSON struct that knows how to validate itself and return certain fields.

type ClientState 

type ClientState interface {
	Get(key string) (string, bool)
}

ClientState represents the client's current state and can answer queries about it.

type ClientStateEvent 

type ClientStateEvent struct {
	Kind  ClientStateEventKind
	Key   string
	Value string
}

ClientStateEvent are the different events that can be recorded during

type ClientStateEventKind 

type ClientStateEventKind int

ClientStateEventKind is an enum. 

const (
	ClientStateEventPut ClientStateEventKind = iota
	ClientStateEventDel
)

ClientStateEvent kinds

type ClientStateReadWriter 

type ClientStateReadWriter interface {
	// ReadState should return a map like structure allowing it to look up
	// any values in the current session, or any cookie in the request
	ReadState(*http.Request) (ClientState, error)
	// WriteState can sometimes be called with a nil ClientState in the event
	// that no ClientState was read in from LoadClientState
	WriteState(http.ResponseWriter, ClientState, []ClientStateEvent) error
}

ClientStateReadWriter is used to create a cookie storer from an http request. Keep in mind security considerations for your implementation, Secure, HTTP-Only, etc flags.

There's two major uses for this. To create session storage, and remember me cookies.

type ClientStateResponseWriter 

type ClientStateResponseWriter struct {
	http.ResponseWriter
	// contains filtered or unexported fields
}

ClientStateResponseWriter is used to write out the client state at the last moment before the response code is written.

func MustClientStateResponseWriter 

func MustClientStateResponseWriter(w http.ResponseWriter) *ClientStateResponseWriter

MustClientStateResponseWriter tries to find a csrw inside the response writer by using the UnderlyingResponseWriter interface.

func (ClientStateResponseWriter) Header 

func (c ClientStateResponseWriter) Header() http.Header

Header retrieves the underlying headers

func (*ClientStateResponseWriter) UnderlyingResponseWriter 

func (c *ClientStateResponseWriter) UnderlyingResponseWriter() http.ResponseWriter

UnderlyingResponseWriter for this instance

func (*ClientStateResponseWriter) Write 

func (c *ClientStateResponseWriter) Write(b []byte) (int, error)

Write ensures that the client state is written before any writes to the body occur (before header flush to http client)

func (*ClientStateResponseWriter) WriteHeader 

func (c *ClientStateResponseWriter) WriteHeader(code int)

WriteHeader writes the header, but in order to handle errors from the underlying ClientStateReadWriter, it has to panic.

type Config 

type Config struct {
	Paths struct {
		// Mount is the path to mount authboss's routes at (eg /auth).
		Mount string

		// AuthLoginOK is the redirect path after a successful authentication.
		AuthLoginOK string

		// ConfirmOK once a user has confirmed their account, where should they go
		ConfirmOK string
		// ConfirmNotOK is used by the middleware, when a user is still supposed to
		// confirm their account, this is where they should be redirected to.
		ConfirmNotOK string

		// LockNotOK is a path to go to when the user fails
		LockNotOK string

		// LogoutOK is the redirect path after a log out.
		LogoutOK string

		// OAuth2LoginOK is the redirect path after a successful oauth2 login
		OAuth2LoginOK string
		// OAuth2LoginNotOK is the redirect path after an unsuccessful oauth2 login
		OAuth2LoginNotOK string

		// RecoverOK is the redirect path after a successful recovery of a password.
		RecoverOK string

		// RegisterOK is the redirect path after a successful registration.
		RegisterOK string

		// RootURL is the scheme+host+port of the web application (eg https://www.happiness.com:8080) for url generation. No trailing slash.
		RootURL string
	}

	Modules struct {
		// BCryptCost is the cost of the bcrypt password hashing function.
		BCryptCost int

		// ExpireAfter controls the time an account is idle before being logged out
		// by the ExpireMiddleware.
		ExpireAfter time.Duration

		// LockAfter this many tries.
		LockAfter int
		// LockWindow is the waiting time before the number of attemps are reset.
		LockWindow time.Duration
		// LockDuration is how long an account is locked for.
		LockDuration time.Duration

		// LogoutMethod is the method the logout route should use (default should be DELETE)
		LogoutMethod string

		// RegisterPreserveFields are fields used with registration that are to be rendered when
		// post fails in a normal way (for example validation errors), they will be passed
		// back in the data of the response under the key DataPreserve which will be a map[string]string.
		//
		// All fields that are to be preserved must be able to be returned by the ArbitraryValuer.GetValues()
		//
		// This means in order to have a field named "address" you would need to have that returned by
		// the ArbitraryValuer.GetValues() method and then it would be available to be whitelisted by this
		// configuration variable.
		RegisterPreserveFields []string

		// RecoverTokenDuration controls how long a token sent via email for password
		// recovery is valid for.
		RecoverTokenDuration time.Duration
		// RecoverLoginAfterRecovery says for the recovery module after a user has successfully
		// recovered the password, are they simply logged in, or are they redirected to
		// the login page with an "updated password" message.
		RecoverLoginAfterRecovery bool

		// OAuth2Providers lists all providers that can be used. See
		// OAuthProvider documentation for more details.
		OAuth2Providers map[string]OAuth2Provider
	}

	Mail struct {
		// From is the email address authboss e-mails come from.
		From string
		// FromName is the name authboss e-mails come from.
		FromName string
		// SubjectPrefix is used to add something to the front of the authboss
		// email subjects.
		SubjectPrefix string
	}

	Storage struct {
		// Storer is the interface through which Authboss accesses the web apps database
		// for user operations.
		Server ServerStorer

		// CookieState must be defined to provide an interface capapable of
		// storing cookies for the given response, and reading them from the request.
		CookieState ClientStateReadWriter
		// SessionState must be defined to provide an interface capable of
		// storing session-only values for the given response, and reading them
		// from the request.
		SessionState ClientStateReadWriter
	}

	Core struct {
		// Router is the entity that controls all routing to authboss routes
		// modules will register their routes with it.
		Router Router

		// ErrorHandler wraps http requests with centralized error handling.
		ErrorHandler ErrorHandler

		// Responder takes a generic response from a controller and prepares
		// the response, uses a renderer to create the body, and replies to the
		// http request.
		Responder HTTPResponder

		// Redirector can redirect a response, similar to Responder but responsible
		// only for redirection.
		Redirector HTTPRedirector

		// BodyReader reads validatable data from the body of a request to be able
		// to get data from the user's client.
		BodyReader BodyReader

		// ViewRenderer loads the templates for the application.
		ViewRenderer Renderer
		// MailRenderer loads the templates for mail. If this is nil, it will
		// fall back to using the Renderer created from the ViewLoader instead.
		MailRenderer Renderer

		// Mailer is the mailer being used to send e-mails out via smtp
		Mailer Mailer

		// Logger implies just a few log levels for use, can optionally
		// also implement the ContextLogger to be able to upgrade to a
		// request specific logger.
		Logger Logger
	}
}

Config holds all the configuration for both authboss and it's modules.

func (*Config) Defaults 

func (c *Config) Defaults()

Defaults sets the configuration's default values.

type ConfirmValuer 

type ConfirmValuer interface {
	Validator

	GetToken() string
}

ConfirmValuer allows us to pull out the token from the request

func MustHaveConfirmValues 

func MustHaveConfirmValues(v Validator) ConfirmValuer

MustHaveConfirmValues upgrades a validatable set of values to ones specific to a user that needs to be confirmed.

type ConfirmableUser 

type ConfirmableUser interface {
	User

	GetEmail() (email string)
	GetConfirmed() (confirmed bool)
	GetConfirmSelector() (selector string)
	GetConfirmVerifier() (verifier string)

	PutEmail(email string)
	PutConfirmed(confirmed bool)
	PutConfirmSelector(selector string)
	PutConfirmVerifier(verifier string)
}

ConfirmableUser can be in a state of confirmed or not

func MustBeConfirmable 

func MustBeConfirmable(u User) ConfirmableUser

MustBeConfirmable forces an upgrade to a ConfirmableUser or panic.

type ConfirmingServerStorer 

type ConfirmingServerStorer interface {
	ServerStorer

	// LoadByConfirmSelector finds a user by his confirm selector field
	// and should return ErrUserNotFound if that user cannot be found.
	LoadByConfirmSelector(ctx context.Context, selector string) (ConfirmableUser, error)
}

ConfirmingServerStorer can find a user by a confirm token

func EnsureCanConfirm 

func EnsureCanConfirm(storer ServerStorer) ConfirmingServerStorer

EnsureCanConfirm makes sure the server storer supports confirm-lookup operations

type ContextLogger 

type ContextLogger interface {
	FromContext(context.Context) Logger
}

ContextLogger creates a logger from a request context

type CreatingServerStorer 

type CreatingServerStorer interface {
	ServerStorer

	// New creates a blank user, it is not yet persisted in the database
	// but is just for storing data
	New(ctx context.Context) User
	// Create the user in storage, it should not overwrite a user
	// and should return ErrUserFound if it currently exists.
	Create(ctx context.Context, user User) error
}

CreatingServerStorer is used for creating new users like when Registration or OAuth2 is being done.

func EnsureCanCreate 

func EnsureCanCreate(storer ServerStorer) CreatingServerStorer

EnsureCanCreate makes sure the server storer supports create operations

type Email 

type Email struct {
	To, Cc, Bcc                []string
	ToNames, CcNames, BccNames []string
	FromName, From             string
	ReplyToName, ReplyTo       string
	Subject                    string

	TextBody string
	HTMLBody string
}

Email all the things. The ToNames and friends are parallel arrays and must be 0-length or the same length as their counterpart. To omit a name for a user at an index in To simply use an empty string at that index in ToNames.

type EmailResponseOptions 

type EmailResponseOptions struct {
	Data         HTMLData
	HTMLTemplate string
	TextTemplate string
}

EmailResponseOptions controls how e-mails are rendered and sent

type ErrorHandler 

type ErrorHandler interface {
	Wrap(func(w http.ResponseWriter, r *http.Request) error) http.Handler
}

ErrorHandler allows routing to http.HandlerFunc's that additionally return an error for a higher level error handling mechanism.

type ErrorList 

type ErrorList []error

ErrorList is simply a slice of errors with helpers.

func (ErrorList) Error 

func (e ErrorList) Error() string

Error satisfies the error interface.

func (ErrorList) Map 

func (e ErrorList) Map() map[string][]string

Map groups errors by their field name

type Event 

type Event int

Event type is for describing events 

const (
	EventRegister Event = iota
	EventAuth
	EventOAuth2
	EventAuthFail
	EventOAuth2Fail
	EventRecoverStart
	EventRecoverEnd
	EventGetUser
	EventGetUserSession
	EventPasswordReset
)

Event kinds

func (Event) String 

func (i Event) String() string

type EventHandler 

type EventHandler func(w http.ResponseWriter, r *http.Request, handled bool) (bool, error)

EventHandler reacts to events that are fired by Authboss controllers. These controllers will normally process a request by themselves, but if there is special consideration for example a successful login, but the user is locked, the lock module's controller may seize control over the request.

Very much a controller level middleware.

type Events 

type Events struct {
	// contains filtered or unexported fields
}

Events is a collection of Events that fire before and after certain methods.

func NewEvents 

func NewEvents() *Events

NewEvents creates a new set of before and after Events.

func (*Events) After 

func (c *Events) After(e Event, f EventHandler)

After event, call f.

func (*Events) Before 

func (c *Events) Before(e Event, f EventHandler)

Before event, call f.

func (*Events) FireAfter 

func (c *Events) FireAfter(e Event, w http.ResponseWriter, r *http.Request) (bool, error)

FireAfter event to all the Events with a context. The error can safely be ignored as it is logged.

func (*Events) FireBefore 

func (c *Events) FireBefore(e Event, w http.ResponseWriter, r *http.Request) (bool, error)

FireBefore executes the handlers that were registered to fire before the event passed in.

If it encounters an error it will stop immediately without calling other handlers.

If a handler handles the request, it will pass this information both to handlers further down the chain (to let them know that w has been used) as well as set w to nil as a precaution.

type FieldError 

type FieldError interface {
	error
	Name() string
	Err() error
}

FieldError describes an error on a field Typically .Error() has both Name() and Err() together, hence the reason for separation.

type FmtLogger 

type FmtLogger struct {
	Logger
}

FmtLogger adds convenience functions on top of the logging methods for formatting.

func (FmtLogger) Errorf 

func (f FmtLogger) Errorf(format string, values ...interface{})

Errorf prints to Error() with fmt.Printf semantics

func (FmtLogger) Infof 

func (f FmtLogger) Infof(format string, values ...interface{})

Infof prints to Info() with fmt.Printf semantics

type HTMLData 

type HTMLData map[string]interface{}

HTMLData is used to render templates with.

func NewHTMLData 

func NewHTMLData(data ...interface{}) HTMLData

NewHTMLData creates HTMLData from key-value pairs. The input is a key-value slice, where odd elements are keys, and the following even element is their value.

func (HTMLData) Merge 

func (h HTMLData) Merge(other HTMLData) HTMLData

Merge adds the data from other to h. If there are conflicting keys they are overwritten by other's values.

func (HTMLData) MergeKV 

func (h HTMLData) MergeKV(data ...interface{}) HTMLData

MergeKV adds extra key-values to the HTMLData. The input is a key-value slice, where odd elements are keys, and the following even element is their value.

type HTTPRedirector 

type HTTPRedirector interface {
	Redirect(w http.ResponseWriter, r *http.Request, ro RedirectOptions) error
}

HTTPRedirector redirects http requests to a different url (must handle both json and html) When an authboss controller wants to redirect a user to a different path, it will use this interface.

type HTTPResponder 

type HTTPResponder interface {
	Respond(w http.ResponseWriter, r *http.Request, code int, templateName string, data HTMLData) error
}

HTTPResponder knows how to respond to an HTTP request Must consider: - Flash messages - XSRF handling (template data) - Assembling template data from various sources

Authboss controller methods (like the one called in response to POST /auth/login) will call this method to write a response to the user.

type LockableUser 

type LockableUser interface {
	User

	GetAttemptCount() (attempts int)
	GetLastAttempt() (last time.Time)
	GetLocked() (locked time.Time)

	PutAttemptCount(attempts int)
	PutLastAttempt(last time.Time)
	PutLocked(locked time.Time)
}

LockableUser is a user that can be locked

func MustBeLockable 

func MustBeLockable(u User) LockableUser

MustBeLockable forces an upgrade to a LockableUser or panic.

type Logger 

type Logger interface {
	Info(string)
	Error(string)
}

Logger is the basic logging structure that's required

type Mailer 

type Mailer interface {
	Send(context.Context, Email) error
}

Mailer is a type that is capable of sending an e-mail.

type Moduler 

type Moduler interface {
	// Init the module
	Init(*Authboss) error
}

Moduler should be implemented by all the authboss modules.

type OAuth2Provider 

type OAuth2Provider struct {
	OAuth2Config     *oauth2.Config
	AdditionalParams url.Values
	FindUserDetails  func(context.Context, oauth2.Config, *oauth2.Token) (map[string]string, error)
}

OAuth2Provider is the entire configuration required to authenticate with this provider.

The OAuth2Config does not need a redirect URL because it will be automatically created by the route registration in the oauth2 module.

AdditionalParams can be used to specify extra parameters to tack on to the end of the initial request, this allows for provider specific oauth options like access_type=offline to be passed to the provider.

FindUserDetails gives the config and the token allowing an http client using the authenticated token to be created, a call is then made to a known endpoint that will return details about the user we've retrieved the token for. Those details are returned as a map[string]string and subsequently passed into OAuth2ServerStorer.NewFromOAuth2. API this must be handled for each provider separately.

type OAuth2ServerStorer 

type OAuth2ServerStorer interface {
	ServerStorer

	// NewFromOAuth2 should return an OAuth2User from a set
	// of details returned from OAuth2Provider.FindUserDetails
	// A more in-depth explanation is that once we've got an access token
	// for the service in question (say a service that rhymes with book)
	// the FindUserDetails function does an http request to a known endpoint that
	// provides details about the user, those details are captured in a generic
	// way as map[string]string and passed into this function to be turned
	// into a real user.
	//
	// It's possible that the user exists in the database already, and so
	// an attempt should be made to look that user up using the details.
	// Any details that have changed should be updated. Do not save the user
	// since that will be done by a later call to OAuth2ServerStorer.SaveOAuth2()
	NewFromOAuth2(ctx context.Context, provider string, details map[string]string) (OAuth2User, error)

	// SaveOAuth2 has different semantics from the typical ServerStorer.Save, in this case
	// we want to insert a user if they do not exist. The difference must be made clear because
	// in the non-oauth2 case, we know exactly when we want to Create vs Update. However
	// since we're simply trying to persist a user that may have been in our database, but if not
	// should already be (since you can think of the operation as a caching of what's on the oauth2 provider's
	// servers).
	SaveOAuth2(ctx context.Context, user OAuth2User) error
}

OAuth2ServerStorer has the ability to create users from data from the provider.

func EnsureCanOAuth2 

func EnsureCanOAuth2(storer ServerStorer) OAuth2ServerStorer

EnsureCanOAuth2 makes sure the server storer supports oauth2 creation and lookup

type OAuth2User 

type OAuth2User interface {
	User

	// IsOAuth2User checks to see if a user was registered in the site as an
	// oauth2 user.
	IsOAuth2User() bool

	GetOAuth2UID() (uid string)
	GetOAuth2Provider() (provider string)
	GetOAuth2AccessToken() (token string)
	GetOAuth2RefreshToken() (refreshToken string)
	GetOAuth2Expiry() (expiry time.Time)

	PutOAuth2UID(uid string)
	PutOAuth2Provider(provider string)
	PutOAuth2AccessToken(token string)
	PutOAuth2RefreshToken(refreshToken string)
	PutOAuth2Expiry(expiry time.Time)
}

OAuth2User allows reading and writing values relating to OAuth2 Also see MakeOAuthPID/ParseOAuthPID for helpers to fullfill the User part of the interface.

func MustBeOAuthable 

func MustBeOAuthable(u User) OAuth2User

MustBeOAuthable forces an upgrade to an OAuth2User or panic.

type RecoverEndValuer 

type RecoverEndValuer interface {
	Validator

	GetPassword() string
	GetToken() string
}

RecoverEndValuer is used to get data back from the final page of password recovery, the user will provide a password and it must be accompanied by the token to authorize the changing of that password. Contrary to the RecoverValuer, this should have validation errors for bad tokens.

func MustHaveRecoverEndValues 

func MustHaveRecoverEndValues(v Validator) RecoverEndValuer

MustHaveRecoverEndValues upgrades a validatable set of values to ones specific to a user that needs to be recovered.

type RecoverMiddleValuer 

type RecoverMiddleValuer interface {
	Validator

	GetToken() string
}

RecoverMiddleValuer provides the token that the user submitted via their link.

func MustHaveRecoverMiddleValues 

func MustHaveRecoverMiddleValues(v Validator) RecoverMiddleValuer

MustHaveRecoverMiddleValues upgrades a validatable set of values to ones specific to a user that's attempting to recover.

type RecoverStartValuer 

type RecoverStartValuer interface {
	Validator

	GetPID() string
}

RecoverStartValuer provides the PID entered by the user.

func MustHaveRecoverStartValues 

func MustHaveRecoverStartValues(v Validator) RecoverStartValuer

MustHaveRecoverStartValues upgrades a validatable set of values to ones specific to a user that needs to be recovered.

type RecoverableUser 

type RecoverableUser interface {
	AuthableUser

	GetEmail() (email string)
	GetRecoverSelector() (selector string)
	GetRecoverVerifier() (verifier string)
	GetRecoverExpiry() (expiry time.Time)

	PutEmail(email string)
	PutRecoverSelector(selector string)
	PutRecoverVerifier(verifier string)
	PutRecoverExpiry(expiry time.Time)
}

RecoverableUser is a user that can be recovered via e-mail

func MustBeRecoverable 

func MustBeRecoverable(u User) RecoverableUser

MustBeRecoverable forces an upgrade to a RecoverableUser or panic.

type RecoveringServerStorer 

type RecoveringServerStorer interface {
	ServerStorer

	// LoadByRecoverSelector finds a user by his recover selector field
	// and should return ErrUserNotFound if that user cannot be found.
	LoadByRecoverSelector(ctx context.Context, selector string) (RecoverableUser, error)
}

RecoveringServerStorer allows users to be recovered by a token

func EnsureCanRecover 

func EnsureCanRecover(storer ServerStorer) RecoveringServerStorer

EnsureCanRecover makes sure the server storer supports confirm-lookup operations

type RedirectOptions 

type RedirectOptions struct {
	// Success & Failure are used to set Flash messages / JSON messages
	// if set. They should be mutually exclusive.
	Success string
	Failure string

	// Code is used when it's an API request instead of 200.
	Code int

	// When a request should redirect a user somewhere on completion, these
	// should be set. RedirectURL tells it where to go. And optionally set
	// FollowRedirParam to override the RedirectURL if the form parameter defined
	// by FormValueRedirect is passed in the request.
	//
	// Redirecting works differently whether it's an API request or not.
	// If it's an API request, then it will leave the URL in a "redirect"
	// parameter.
	RedirectPath     string
	FollowRedirParam bool
}

RedirectOptions packages up all the pieces a module needs to write out a response.

type RememberValuer 

type RememberValuer interface {

	// GetShouldRemember is the checkbox or what have you that
	// tells the remember module if it should remember that user's
	// authentication or not.
	GetShouldRemember() bool
}

RememberValuer allows auth/oauth2 to pass along the remember bool from the user to the remember module unobtrusively.

type RememberingServerStorer 

type RememberingServerStorer interface {
	ServerStorer

	// AddRememberToken to a user
	AddRememberToken(ctx context.Context, pid, token string) error
	// DelRememberTokens removes all tokens for the given pid
	DelRememberTokens(ctx context.Context, pid string) error
	// UseRememberToken finds the pid-token pair and deletes it.
	// If the token could not be found return ErrTokenNotFound
	UseRememberToken(ctx context.Context, pid, token string) error
}

RememberingServerStorer allows users to be remembered across sessions

func EnsureCanRemember 

func EnsureCanRemember(storer ServerStorer) RememberingServerStorer

EnsureCanRemember makes sure the server storer supports remember operations

type Renderer 

type Renderer interface {
	// Load the given templates, will most likely be called multiple times
	Load(names ...string) error

	// Render the given template
	Render(ctx context.Context, page string, data HTMLData) (output []byte, contentType string, err error)
}

Renderer is a type that can render a given template with some data.

type RequestLogger 

type RequestLogger interface {
	FromRequest(*http.Request) Logger
}

RequestLogger creates a logger from a request

type Router 

type Router interface {
	http.Handler

	Get(path string, handler http.Handler)
	Post(path string, handler http.Handler)
	Delete(path string, handler http.Handler)
}

Router can register routes to later be used by the web application

type ServerStorer 

type ServerStorer interface {
	// Load will look up the user based on the passed the PrimaryID
	Load(ctx context.Context, key string) (User, error)

	// Save persists the user in the database, this should never
	// create a user and instead return ErrUserNotFound if the user
	// does not exist.
	Save(ctx context.Context, user User) error
}

ServerStorer represents the data store that's capable of loading users and giving them a context with which to store themselves.

type UnderlyingResponseWriter 

type UnderlyingResponseWriter interface {
	UnderlyingResponseWriter() http.ResponseWriter
}

UnderlyingResponseWriter retrieves the response writer underneath the current one. This allows us to wrap and later discover the particular one that we want. Keep in mind this should not be used to call the normal methods of a responsewriter, just additional ones particular to that type because it's possible to introduce subtle bugs otherwise.

type User 

type User interface {
	GetPID() (pid string)
	PutPID(pid string)
}

User has functions for each piece of data it requires. Data should not be persisted on each function call. User has a PID (primary ID) that is used on the site as a single unique identifier to any given user (very typically e-mail or username).

User interfaces return no errors or bools to signal that a value was not present. Instead 0-value = null = not present, this puts the onus on Authboss code to check for this.

type UserValuer 

type UserValuer interface {
	Validator

	GetPID() string
	GetPassword() string
}

UserValuer gets a string from a map-like data structure Typically a decoded JSON or form auth request

func MustHaveUserValues 

func MustHaveUserValues(v Validator) UserValuer

MustHaveUserValues upgrades a validatable set of values to ones specific to an authenticating user.

type Validator 

type Validator interface {
	// Validate makes the type validate itself and return
	// a list of validation errors.
	Validate() []error
}

Validator takes a form name and a set of inputs and returns any validation errors for the inputs.

Source Files

View all Source files

Directories

Path Synopsis
Package auth implements password based user logins.
 Package auth implements password based user logins.
Package confirm implements confirmation of user registration via e-mail
 Package confirm implements confirmation of user registration via e-mail
Package defaults houses default implementations for the very many interfaces that authboss has.
 Package defaults houses default implementations for the very many interfaces that authboss has.
Package expire helps expire user's logged in sessions
 Package expire helps expire user's logged in sessions
internal
mocks
Package mocks defines implemented interfaces for testing modules
 Package mocks defines implemented interfaces for testing modules
Package lock implements user locking after N bad sign-in attempts.
 Package lock implements user locking after N bad sign-in attempts.
Package logout allows users to log out (from auth or oauth2 logins)
 Package logout allows users to log out (from auth or oauth2 logins)
Package oauth2 allows users to be created and authenticated via oauth2 services like facebook, google etc.
 Package oauth2 allows users to be created and authenticated via oauth2 services like facebook, google etc.
Package recover implements password reset via e-mail.
 Package recover implements password reset via e-mail.
Package register allows for user registration.
 Package register allows for user registration.
Package remember implements persistent logins using cookies
 Package remember implements persistent logins using cookies

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL
go.dev uses cookies from Google to deliver and enhance the quality of its services and to analyze traffic. Learn more.