voltctl

README

voltctl, a CLI for VOLTHA

This repository contains voltctl, a CLI tool for managing and operating VOLTHA components.

It functions similarly to the docker CLI or kubernetes kubectl CLI, in that it's a simple standalone control application which can perform various functions and has flexible and customizable output formats either as a table or JSON.

Build / Install

To install the voltctl command, downloads are available for multiple platforms and architectures from the github releases page, or you can compile your own copy by installing Go 1.13.x, checking out the code and running make build.

Shell Completion

voltctl supports shell completion for the bash shell. To enable shell Completion you can use the following command on most *nix based system.

source <(voltctl completion bash)

If you are running an older bash 3.x shell (default on MacOS), then you can try the following command:

source /dev/stdin <<<"$(voltctl completion bash)"

If you which to make bash shell completion automatic when you login to your account you can append the output of voltctl completion bash to your $HOME/.bashrc:

voltctl completion base >> $HOME/.bashrc

Configuration file

voltctl stores it's configuration file in ~/.volt/config. An example of the configuration file can be found in the voltctl.config file in this repo.

Usage and Commands

$ ./voltctl -h
Usage:
  voltctl [OPTIONS] <command>

Global Options:
  -c, --config=FILE                     Location of client config file [$VOLTCONFIG]
  -s, --server=SERVER:PORT              IP/Host and port of VOLTHA
  -k, --kafka=SERVER:PORT               IP/Host and port of Kafka
  -e, --kvstore=SERVER:PORT             IP/Host and port of KV store (etcd) [$KVSTORE]
  -d, --debug                           Enable debug mode
  -t, --timeout=DURATION                API call timeout duration
      --tls                             Use TLS
      --tlscacert=CA_CERT_FILE          Trust certs signed only by this CA
      --tlscert=CERT_FILE               Path to TLS vertificate file
      --tlskey=KEY_FILE                 Path to TLS key file
      --tlsverify                       Use TLS and verify the remote
  -8, --k8sconfig=FILE                  Location of Kubernetes config file [$KUBECONFIG]
      --kvstoretimeout=DURATION         timeout for calls to KV store [$KVSTORE_TIMEOUT]
  -o, --command-options=FILE            Location of command options default configuration file [$VOLTCTL_COMMAND_OPTIONS]

Help Options:
  -h, --help                            Show this help message

Available commands:
  adapter        adapter commands
  completion     generate shell compleition
  component      component instance commands
  config         generate voltctl configuration
  device         device commands
  devicegroup    device group commands
  event          event commands
  log            log config commands
  logicaldevice  logical device commands
  message        message commands
  version        display version

Help specific to each command can be found by running volctl <command> -h.

Changing the command output format

Each command has a default output table format. This can be overridden from the command line using the voltctl --format=... option. The specification of the format is roughly equivalent to the docker or kubectl command. If the prefix table is specified a table with headers will be displayed, else each line will be output as specified.

The output of a command may also be written as JSON or YAML by using the --outputas or -o command line option. Valid values for this options are table, json, or yaml.

Overriding Default Command Format and Order

The default format and ordering of commands can be overridden (specified) by the command line options, but they can also be set via a configuration file so that the overrides don't have to be specified on each invocation.

By default the file ~/.volt/command_options is loaded, but the file used can also be specified by the environment variable VOLTCTL_COMMAND_OPTIONS or via the command line arguments.

A sample of this file is include in the repository as voltctl_command_options.config.

Examples

$ voltctl adapter list
ID                   VENDOR            VERSION       SINCELASTCOMMUNICATION
openolt              VOLTHA OpenOLT    2.3.0-dev     NEVER
brcm_openomci_onu    VOLTHA OpenONU    2.3.0-dev     32m10s

$ voltctl adapter list --outputas json
[{"Id":"openolt","Vendor":"VOLTHA OpenOLT","Version":"2.3.0-dev","LogLevel":"","LastCommunication":"NEVER","SinceLastCommunication":"NEVER"},{"Id":"brcm_openomci_onu","Vendor":"VOLTHA OpenONU","Version":"2.3.0-dev","LogLevel":"DEBUG","LastCommunication":"2020-04-04T20:48:59Z","SinceLastCommunication":"1s"}]

After piping through python -m json.tool:

[
    {
        "Id": "openolt",
        "LastCommunication": "NEVER",
        "LogLevel": "",
        "SinceLastCommunication": "NEVER",
        "Vendor": "VOLTHA OpenOLT",
        "Version": "2.3.0-dev"
    },
    {
        "Id": "brcm_openomci_onu",
        "LastCommunication": "2020-04-04T20:46:45Z",
        "LogLevel": "DEBUG",
        "SinceLastCommunication": "1m57s",
        "Vendor": "VOLTHA OpenONU",
        "Version": "2.3.0-dev"
    }
]

$ voltctl device list
ID                                      TYPE                 ROOT     PARENTID                                SERIALNUMBER    ADMINSTATE    OPERSTATUS    CONNECTSTATUS    REASON
1398f977-3630-43d2-8d3b-1ae395a95162    openolt              true     540fc38e-cf35-4d14-8b01-7760acecefaa    BBSIM_OLT_0     ENABLED       ACTIVE        REACHABLE
5bacc996-b922-41fc-8ddc-a92d29729955    brcm_openomci_onu    false    1398f977-3630-43d2-8d3b-1ae395a95162    BBSM00000001    ENABLED       ACTIVE        REACHABLE        omci-flows-pushed

$ voltctl device list --format 'table{{.Id}}\t{{.SerialNumber}}\t{{.ConnectStatus}}'
ID                                      SERIALNUMBER    CONNECTSTATUS
1398f977-3630-43d2-8d3b-1ae395a95162    BBSIM_OLT_0     REACHABLE
5bacc996-b922-41fc-8ddc-a92d29729955    BBSM00000001    REACHABLE

$ voltctl device list --outputas json
[{"id":"d2960b6e-f963-4acb-83c9-492b3211cf6b","type":"brcm_openomci_onu","root":false,"parentid":"e2c1d2cd-c260-4285-8632-7b205aed660a","parentportno":536870912,"vendor":"OpenONU","model":"","hardwareversion":"","firmwareversion":"","serialnumber":"BBSM00000001","vendorid":"BBSM","adapter":"brcm_openomci_onu","vlan":0,"macaddress":"","address":"unknown","extraargs":"","proxyaddress":{"deviceId":"e2c1d2cd-c260-4285-8632-7b205aed660a","devicetype":"openolt","channelid":0,"channelgroup":0,"onuid":1,"onusessionid":0},"adminstate":"ENABLED","operstatus":"DISCOVERED","reason":"stopping-openomci","connectstatus":"UNREACHABLE","ports":[{"portno":536870912,"label":"PON port","type":"PON_ONU","adminstate":"ENABLED","operstatus":"ACTIVE","deviceid":"","peers":[{"deviceid":"e2c1d2cd-c260-4285-8632-7b205aed660a","portno":536870912}]},{"portno":16,"label":"uni-16","type":"ETHERNET_UNI","adminstate":"ENABLED","operstatus":"UNKNOWN","deviceid":"","peers":[]},{"portno":17,"label":"uni-17","type":"ETHERNET_UNI","adminstate":"ENABLED","operstatus":"DISCOVERED","deviceid":"","peers":[]},{"portno":18,"label":"uni-18","type":"ETHERNET_UNI","adminstate":"ENABLED","operstatus":"DISCOVERED","deviceid":"","peers":[]},{"portno":19,"label":"uni-19","type":"ETHERNET_UNI","adminstate":"ENABLED","operstatus":"DISCOVERED","deviceid":"","peers":[]}],"flows":[{"id":"8c4fd2d0f768700a","tableid":0,"durationsec":0,"durationnsec":0,"idletimeout":0,"hardtimeout":0,"packetcount":0,"bytecount":0,"priority":1000,"cookie":"~3fd5629a","inport":"16","vlanid":"0","setvlanid":"900","output":"536870912","writemetadata":"0x0384004000100000","meter":"2","tunnelid":"16"},{"id":"5d0b3499cd2bf4ac","tableid":0,"durationsec":0,"durationnsec":0,"idletimeout":0,"hardtimeout":0,"packetcount":0,"bytecount":0,"priority":1000,"cookie":"~4df91e40","inport":"536870912","vlanid":"900","metadata":"0x0000000000000010","setvlanid":"0","output":"16","writemetadata":"0x0000004000000000","meter":"2"},{"id":"21a5ad60293e6c60","tableid":0,"durationsec":0,"durationnsec":0,"idletimeout":0,"hardtimeout":0,"packetcount":0,"bytecount":0,"priority":10000,"cookie":"~ba31a4f2","inport":"16","ethtype":"0x0800","ipproto":"17","udpsrc":"68","dstsrc":"67","setvlanid":"900","pushvlanid":"0x8100","output":"536870912","writemetadata":"0x0000004000000000","meter":"2","tunnelid":"16"}]},{"id":"e2c1d2cd-c260-4285-8632-7b205aed660a","type":"openolt","root":true,"parentid":"28d1128f-7d9a-48fa-b60b-d96e1491d92a","parentportno":0,"vendor":"BBSim","model":"asfvolt16","hardwareversion":"","firmwareversion":"","serialnumber":"BBSIM_OLT_0","vendorid":"","adapter":"openolt","vlan":0,"macaddress":"0a:0a:0a:0a:0a:00","address":"bbsim.voltha.svc:50060","extraargs":"","adminstate":"DISABLED","operstatus":"UNKNOWN","reason":"","connectstatus":"REACHABLE","ports":[{"portno":1048576,"label":"nni-1048576","type":"ETHERNET_NNI","adminstate":"ENABLED","operstatus":"ACTIVE","deviceid":"","peers":[]},{"portno":536870912,"label":"pon-536870912","type":"PON_OLT","adminstate":"ENABLED","operstatus":"DISCOVERED","deviceid":"","peers":[{"deviceid":"d2960b6e-f963-4acb-83c9-492b3211cf6b","portno":536870912}]}],"flows":[{"id":"e1746c5320441c57","tableid":0,"durationsec":0,"durationnsec":0,"idletimeout":0,"hardtimeout":0,"packetcount":0,"bytecount":0,"priority":10000,"cookie":"~f81586a7","inport":"1048576","ethtype":"0x0800","ipproto":"17","udpsrc":"67","dstsrc":"68","output":"CONTROLLER"},{"id":"12f8e0237d36dcab","tableid":0,"durationsec":0,"durationnsec":0,"idletimeout":0,"hardtimeout":0,"packetcount":0,"bytecount":0,"priority":10000,"cookie":"~ce6c3527","inport":"1048576","ethtype":"0x88cc","output":"CONTROLLER"},{"id":"35f0a5d7315c8b8a","tableid":0,"durationsec":0,"durationnsec":0,"idletimeout":0,"hardtimeout":0,"packetcount":0,"bytecount":0,"priority":1000,"cookie":"~986cca9a","inport":"536870912","vlanid":"900","setvlanid":"900","pushvlanid":"0x8100","output":"1048576","writemetadata":"0x0000004000000000","meter":"2","tunnelid":"16"},{"id":"755a065fb691c418","tableid":0,"durationsec":0,"durationnsec":0,"idletimeout":0,"hardtimeout":0,"packetcount":0,"bytecount":0,"priority":1000,"cookie":"~531d5ec9","inport":"1048576","vlanid":"900","metadata":"0x0000000000000384","popvlan":"yes","output":"536870912","writemetadata":"0x0384004000000010","meter":"2","tunnelid":"16"},{"id":"e11f009524a53eb2","tableid":0,"durationsec":0,"durationnsec":0,"idletimeout":0,"hardtimeout":0,"packetcount":0,"bytecount":0,"priority":10000,"cookie":"~ba31a4f2","inport":"536870912","ethtype":"0x0800","vlanid":"900","ipproto":"17","udpsrc":"68","dstsrc":"67","output":"CONTROLLER","writemetadata":"0x0000004000000000","meter":"2","tunnelid":"16"}]}]

Configure logs in the VOLTHA components

Check the current log levels:

$ voltctl log level list
COMPONENTNAME       PACKAGENAME    LEVEL
read-write-core     default        DEBUG
adapter-open-olt    default        DEBUG
global              default        WARN
open-flow-agent     default        DEBUG

Configure the global log level:

$ voltctl log level set INFO
COMPONENTNAME    PACKAGENAME    STATUS     ERROR
global           default        Success

Configure the default log level of a component:

$ voltctl log level set ERROR read-write-core
COMPONENTNAME      PACKAGENAME    STATUS     ERROR
read-write-core    default        Success

Set the log level of a specific package within a component:

$ voltctl log level set WARN adapter-open-olt#github.com/opencord/voltha-lib-go/kafka
COMPONENTNAME       PACKAGENAME                                 STATUS     ERROR
adapter-open-olt    github.com/opencord/voltha-lib-go/kafka    Success

Get list of valid log packages for a component:

$ voltctl log package list adapter-open-olt
COMPONENTNAME       PACKAGENAME
adapter-open-olt    default
adapter-open-olt    github.com/opencord/voltha-lib-go/v3/pkg/adapters/common
adapter-open-olt    github.com/opencord/voltha-lib-go/v3/pkg/config
adapter-open-olt    github.com/opencord/voltha-lib-go/v3/pkg/db
adapter-open-olt    github.com/opencord/voltha-lib-go/v3/pkg/db/kvstore
adapter-open-olt    github.com/opencord/voltha-lib-go/v3/pkg/flows
adapter-open-olt    github.com/opencord/voltha-lib-go/v3/pkg/kafka
adapter-open-olt    github.com/opencord/voltha-lib-go/v3/pkg/ponresourcemanager
adapter-open-olt    github.com/opencord/voltha-lib-go/v3/pkg/probe
adapter-open-olt    github.com/opencord/voltha-lib-go/v3/pkg/techprofile
adapter-open-olt    github.com/opencord/voltha-openolt-adapter/internal/pkg/config
adapter-open-olt    github.com/opencord/voltha-openolt-adapter/internal/pkg/core
adapter-open-olt    github.com/opencord/voltha-openolt-adapter/internal/pkg/resourcemanager
adapter-open-olt    main