storage

package
v0.20.0 Latest Latest
Warning

This package is not in the latest version of its module.

 Go to latest Published: May 21, 2020 License: Apache-2.0 Imports: 6 Imported by: 269

Documentation

Overview

Package storage exposes the policy engine's storage layer.

Index

Constants

View Source 
const (
	// InternalErr indicates an unknown, internal error has occurred.
	InternalErr = "storage_internal_error"

	// NotFoundErr indicates the path used in the storage operation does not
	// locate a document.
	NotFoundErr = "storage_not_found_error"

	// WriteConflictErr indicates a write on the path enocuntered a conflicting
	// value inside the transaction.
	WriteConflictErr = "storage_write_conflict_error"

	// InvalidPatchErr indicates an invalid patch/write was issued. The patch
	// was rejected.
	InvalidPatchErr = "storage_invalid_patch_error"

	// InvalidTransactionErr indicates an invalid operation was performed
	// inside of the transaction.
	InvalidTransactionErr = "storage_invalid_txn_error"

	// TriggersNotSupportedErr indicates the caller attempted to register a
	// trigger against a store that does not support them.
	TriggersNotSupportedErr = "storage_triggers_not_supported_error"

	// WritesNotSupportedErr indicate the caller attempted to perform a write
	// against a store that does not support them.
	WritesNotSupportedErr = "storage_writes_not_supported_error"

	// PolicyNotSupportedErr indicate the caller attempted to perform a policy
	// management operation against a store that does not support them.
	PolicyNotSupportedErr = "storage_policy_not_supported_error"

	// IndexingNotSupportedErr indicate the caller attempted to perform an
	// indexing operation against a store that does not support them.
	IndexingNotSupportedErr = "storage_indexing_not_supported_error"
)
View Source 
const (
	AddOp     PatchOp = iota
	RemoveOp          = iota
	ReplaceOp         = iota
)

Patch supports add, remove, and replace operations.

Variables

View Source 
var WriteParams = TransactionParams{
	Write: true,
}

WriteParams specifies the TransactionParams for a write transaction.

Functions

func IsIndexingNotSupported added in v0.5.0 

func IsIndexingNotSupported(err error) bool

IsIndexingNotSupported returns true if this error is a IndexingNotSupportedErr.

func IsInvalidPatch added in v0.2.0 

func IsInvalidPatch(err error) bool

IsInvalidPatch returns true if this error is a InvalidPatchErr.

func IsInvalidTransaction added in v0.5.0 

func IsInvalidTransaction(err error) bool

IsInvalidTransaction returns true if this error is a InvalidTransactionErr.

func IsNotFound 

func IsNotFound(err error) bool

IsNotFound returns true if this error is a NotFoundErr.

func IsWriteConflictError added in v0.8.0 

func IsWriteConflictError(err error) bool

IsWriteConflictError returns true if this error a WriteConflictErr.

func MakeDir added in v0.8.0 

func MakeDir(ctx context.Context, store Store, txn Transaction, path Path) (err error)

MakeDir inserts an empty object at path. If the parent path does not exist, MakeDir will create it recursively.

func NonEmpty added in v0.10.4 

func NonEmpty(ctx context.Context, store Store, txn Transaction) func([]string) (bool, error)

NonEmpty returns a function that tests if a path is non-empty. A path is non-empty if a Read on the path returns a value or a Read on any of the path prefixes returns a non-object value.

func ReadOne added in v0.5.3 

func ReadOne(ctx context.Context, store Store, path Path) (interface{}, error)

ReadOne is a convenience function to read a single value from the provided Store. It will create a new Transaction to perform the read with, and clean up after itself should an error occur.

func Txn added in v0.5.9 

func Txn(ctx context.Context, store Store, params TransactionParams, f func(Transaction) error) error

Txn is a convenience function that executes f inside a new transaction opened on the store. If the function returns an error, the transaction is aborted and the error is returned. Otherwise, the transaction is committed and the result of the commit is returned.

func WriteOne added in v0.5.3 

func WriteOne(ctx context.Context, store Store, op PatchOp, path Path, value interface{}) error

WriteOne is a convenience function to write a single value to the provided Store. It will create a new Transaction to perform the write with, and clean up after itself should an error occur.

Types

type Context added in v0.12.2 

type Context struct {
	// contains filtered or unexported fields
}

Context is a simple container for key/value pairs.

func NewContext added in v0.12.2 

func NewContext() *Context

NewContext returns a new context object.

func (*Context) Get added in v0.12.2 

func (ctx *Context) Get(key interface{}) interface{}

Get returns the key value in the context.

func (*Context) Put added in v0.12.2 

func (ctx *Context) Put(key, value interface{})

Put adds a key/value pair to the context.

type DataEvent added in v0.5.3 

type DataEvent struct {
	Path    Path
	Data    interface{}
	Removed bool
}

DataEvent describes a change to a base data document.

type Error 

type Error struct {
	Code    string `json:"code"`
	Message string `json:"message"`
}

Error is the error type returned by the storage layer.

func (*Error) Error 

func (err *Error) Error() string

type Index 

type Index interface {
	Lookup(ctx context.Context, txn Transaction, value interface{}, iter IndexIterator) error
}

Index defines the interface for searching a pre-built index.

type IndexIterator added in v0.5.0 

type IndexIterator func(*ast.ValueMap) error

IndexIterator defines the interface for iterating over index results.

type Indexing added in v0.5.0 

type Indexing interface {
	Build(ctx context.Context, txn Transaction, ref ast.Ref) (Index, error)
}

Indexing defines the interface for building an index.

type IndexingNotSupported added in v0.5.0 

type IndexingNotSupported struct{}

IndexingNotSupported provides default implementations of the Indexing interface which may be used if the backend does not support indexing.

func (IndexingNotSupported) Build added in v0.5.0 

func (IndexingNotSupported) Build(context.Context, Transaction, ast.Ref) (Index, error)

Build always returns an error indicating indexing is not supported.

type PatchOp 

type PatchOp int

PatchOp is the enumeration of supposed modifications.

type Path added in v0.3.0 

type Path []string

Path refers to a document in storage.

func MustParsePath added in v0.3.0 

func MustParsePath(s string) Path

MustParsePath returns a new Path for s. If s cannot be parsed, this function will panic. This is mostly for test purposes.

func NewPathForRef added in v0.3.0 

func NewPathForRef(ref ast.Ref) (path Path, err error)

NewPathForRef returns a new path for the given ref.

func ParsePath added in v0.3.0 

func ParsePath(str string) (path Path, ok bool)

ParsePath returns a new path for the given str.

func ParsePathEscaped added in v0.8.1 

func ParsePathEscaped(str string) (path Path, ok bool)

ParsePathEscaped returns a new path for the given escaped str.

func (Path) Compare added in v0.3.0 

func (p Path) Compare(other Path) (cmp int)

Compare performs lexigraphical comparison on p and other and returns -1 if p is less than other, 0 if p is equal to other, or 1 if p is greater than other.

func (Path) Equal added in v0.3.0 

func (p Path) Equal(other Path) bool

Equal returns true if p is the same as other.

func (Path) HasPrefix added in v0.3.0 

func (p Path) HasPrefix(other Path) bool

HasPrefix returns true if p starts with other.

func (Path) Ref added in v0.3.0 

func (p Path) Ref(head *ast.Term) (ref ast.Ref)

Ref returns a ref that represents p rooted at head.

func (Path) String added in v0.3.0 

func (p Path) String() string

type Policy added in v0.5.0 

type Policy interface {
	ListPolicies(context.Context, Transaction) ([]string, error)
	GetPolicy(context.Context, Transaction, string) ([]byte, error)
	UpsertPolicy(context.Context, Transaction, string, []byte) error
	DeletePolicy(context.Context, Transaction, string) error
}

Policy defines the interface for policy module storage.

type PolicyEvent added in v0.5.3 

type PolicyEvent struct {
	ID      string
	Data    []byte
	Removed bool
}

PolicyEvent describes a change to a policy.

type PolicyNotSupported added in v0.5.0 

type PolicyNotSupported struct{}

PolicyNotSupported provides a default implementation of the policy interface which may be used if the backend does not support policy storage.

func (PolicyNotSupported) DeletePolicy added in v0.5.0 

func (PolicyNotSupported) DeletePolicy(context.Context, Transaction, string) error

DeletePolicy always returns a PolicyNotSupportedErr.

func (PolicyNotSupported) GetPolicy added in v0.5.0 

func (PolicyNotSupported) GetPolicy(context.Context, Transaction, string) ([]byte, error)

GetPolicy always returns a PolicyNotSupportedErr.

func (PolicyNotSupported) ListPolicies added in v0.5.0 

func (PolicyNotSupported) ListPolicies(context.Context, Transaction) ([]string, error)

ListPolicies always returns a PolicyNotSupportedErr.

func (PolicyNotSupported) UpsertPolicy added in v0.5.0 

func (PolicyNotSupported) UpsertPolicy(context.Context, Transaction, string, []byte) error

UpsertPolicy always returns a PolicyNotSupportedErr.

type Store added in v0.2.0 

type Store interface {
	Trigger
	Policy
	Indexing

	// NewTransaction is called create a new transaction in the store.
	NewTransaction(ctx context.Context, params ...TransactionParams) (Transaction, error)

	// Read is called to fetch a document referred to by path.
	Read(ctx context.Context, txn Transaction, path Path) (interface{}, error)

	// Write is called to modify a document referred to by path.
	Write(ctx context.Context, txn Transaction, op PatchOp, path Path, value interface{}) error

	// Commit is called to finish the transaction. If Commit returns an error, the
	// transaction must be automatically aborted by the Store implementation.
	Commit(ctx context.Context, txn Transaction) error

	// Abort is called to cancel the transaction.
	Abort(ctx context.Context, txn Transaction)
}

Store defines the interface for the storage layer's backend.

type Transaction added in v0.2.0 

type Transaction interface {
	ID() uint64
}

Transaction defines the interface that identifies a consistent snapshot over the policy engine's storage layer.

func NewTransactionOrDie added in v0.2.0 

func NewTransactionOrDie(ctx context.Context, store Store, params ...TransactionParams) Transaction

NewTransactionOrDie is a helper function to create a new transaction. If the storage layer cannot create a new transaction, this function will panic. This function should only be used for tests.

type TransactionParams added in v0.3.0 

type TransactionParams struct {

	// Write indicates if this transaction will perform any write operations.
	Write bool

	// Context contains key/value pairs passed to triggers.
	Context *Context
}

TransactionParams describes a new transaction.

type Trigger added in v0.2.0 

type Trigger interface {
	Register(ctx context.Context, txn Transaction, config TriggerConfig) (TriggerHandle, error)
}

Trigger defines the interface that stores implement to register for change notifications when the store is changed.

type TriggerConfig added in v0.2.0 

type TriggerConfig struct {

	// OnCommit is invoked when a transaction is successfully committed. The
	// callback is invoked with a handle to the write transaction that
	// successfully committed before other clients see the changes.
	OnCommit func(ctx context.Context, txn Transaction, event TriggerEvent)
}

TriggerConfig contains the trigger registration configuration.

type TriggerEvent added in v0.5.0 

type TriggerEvent struct {
	Policy  []PolicyEvent
	Data    []DataEvent
	Context *Context
}

TriggerEvent describes the changes that caused the trigger to be invoked.

func (TriggerEvent) DataChanged added in v0.5.0 

func (e TriggerEvent) DataChanged() bool

DataChanged returns true if the trigger was caused by a data change.

func (TriggerEvent) IsZero added in v0.5.0 

func (e TriggerEvent) IsZero() bool

IsZero returns true if the TriggerEvent indicates no changes occurred. This function is primarily for test purposes.

func (TriggerEvent) PolicyChanged added in v0.5.0 

func (e TriggerEvent) PolicyChanged() bool

PolicyChanged returns true if the trigger was caused by a policy change.

type TriggerHandle added in v0.5.3 

type TriggerHandle interface {
	Unregister(ctx context.Context, txn Transaction)
}

TriggerHandle defines the interface that can be used to unregister triggers that have been registered on a Store.

type TriggersNotSupported added in v0.2.0 

type TriggersNotSupported struct{}

TriggersNotSupported provides default implementations of the Trigger interface which may be used if the backend does not support triggers.

func (TriggersNotSupported) Register added in v0.2.0 

func (TriggersNotSupported) Register(context.Context, Transaction, TriggerConfig) (TriggerHandle, error)

Register always returns an error indicating triggers are not supported.

type WritesNotSupported added in v0.2.0 

type WritesNotSupported struct{}

WritesNotSupported provides a default implementation of the write interface which may be used if the backend does not support writes.

func (WritesNotSupported) Write added in v0.2.0 

func (WritesNotSupported) Write(ctx context.Context, txn Transaction, op PatchOp, path Path, value interface{}) error

Source Files

View all Source files

Directories

Path Synopsis
Package inmem implements an in-memory version of the policy engine's storage layer.
 Package inmem implements an in-memory version of the policy engine's storage layer.

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL
go.dev uses cookies from Google to deliver and enhance the quality of its services and to analyze traffic. Learn more.