messages

package
v0.37.22-verify-backwa... Latest Latest
Warning

This package is not in the latest version of its module.

 Go to latest Published: Dec 10, 2024 License: AGPL-3.0 Imports: 3 Imported by: 27

Documentation

Index

Constants

This section is empty.

Variables

This section is empty.

Functions

This section is empty.

Types

type ApprovalRequest added in v0.14.0 

type ApprovalRequest struct {
	Nonce      uint64
	ResultID   flow.Identifier
	ChunkIndex uint64
}

ApprovalRequest represents a request for a ResultApproval corresponding to a specific chunk.

type ApprovalResponse added in v0.14.0 

type ApprovalResponse struct {
	Nonce    uint64
	Approval flow.ResultApproval
}

ApprovalResponse contains a response to an approval request.

type BatchRequest 

type BatchRequest struct {
	Nonce    uint64
	BlockIDs []flow.Identifier
}

BatchRequest is part of the synchronization protocol and represents an active (pulling) attempt to synchronize with the consensus state of the network. It requests finalized or unfinalized blocks by a list of block IDs. All BatchRequest messages are validated before being processed. If validation fails, then a misbehavior report is created. See synchronization.validateBatchRequestForALSP for more details.

type BlockProposal 

type BlockProposal struct {
	Block UntrustedBlock
}

BlockProposal is part of the consensus protocol and represents the leader of a consensus round pushing a new proposal to the network.

func NewBlockProposal added in v0.29.0 

func NewBlockProposal(internal *flow.Block) *BlockProposal

type BlockResponse 

type BlockResponse struct {
	Nonce  uint64
	Blocks []UntrustedBlock
}

BlockResponse is part of the synchronization protocol and represents the reply to any active synchronization attempts. It contains a list of blocks that should correspond to the request.

func (*BlockResponse) BlocksInternal added in v0.29.0 

func (br *BlockResponse) BlocksInternal() []*flow.Block

type BlockVote 

type BlockVote struct {
	BlockID flow.Identifier
	View    uint64
	SigData []byte
}

BlockVote is part of the consensus protocol and represents a consensus node voting on the proposal of the leader of a given round.

type BroadcastDKGMessage added in v0.20.0 

type BroadcastDKGMessage struct {
	DKGMessage
	CommitteeMemberIndex uint64          `json:"-"` // CommitteeMemberIndex field is set when reading broadcast messages using the NodeID to find the index of the sender in the DKG committee
	NodeID               flow.Identifier `json:"-"` // NodeID field is added when reading broadcast messages from the DKG contract, this field is ignored when sending broadcast messages
	Signature            crypto.Signature
}

BroadcastDKGMessage is a wrapper around a DKGMessage intended for broadcasting. It contains a signature of the DKGMessage signed with the staking key of the sender. When the DKG contract receives BroadcastDKGMessage' it will attach the NodeID of the sender, we then add this field to the BroadcastDKGMessage when reading broadcast messages.

type ChunkDataRequest 

type ChunkDataRequest struct {
	ChunkID flow.Identifier
	Nonce   uint64 // so that we aren't deduplicated by the network layer
}

ChunkDataRequest represents a request for the a chunk data pack which is specified by a chunk ID.

type ChunkDataResponse 

type ChunkDataResponse struct {
	ChunkDataPack flow.ChunkDataPack
	Nonce         uint64 // so that we aren't deduplicated by the network layer
}

ChunkDataResponse is the response to a chunk data pack request. It contains the chunk data pack of the interest.

type ClusterBlockProposal 

type ClusterBlockProposal struct {
	Block UntrustedClusterBlock
}

ClusterBlockProposal is a proposal for a block in collection node cluster consensus. The header contains information about consensus state and the payload contains the proposed collection (may be empty).

func NewClusterBlockProposal added in v0.29.0 

func NewClusterBlockProposal(internal *cluster.Block) *ClusterBlockProposal

type ClusterBlockResponse 

type ClusterBlockResponse struct {
	Nonce  uint64
	Blocks []UntrustedClusterBlock
}

ClusterBlockResponse is the same thing as BlockResponse, but for cluster consensus.

func (*ClusterBlockResponse) BlocksInternal added in v0.29.0 

func (br *ClusterBlockResponse) BlocksInternal() []*cluster.Block

type ClusterBlockVote 

type ClusterBlockVote BlockVote

ClusterBlockVote is a vote for a proposed block in collection node cluster consensus; effectively a vote for a particular collection.

type ClusterTimeoutObject added in v0.29.0 

type ClusterTimeoutObject TimeoutObject

ClusterTimeoutObject is part of the collection cluster protocol and represents a collection node timing out in given round. Contains a sequential number for deduplication purposes.

type CollectionRequest 

type CollectionRequest struct {
	ID    flow.Identifier
	Nonce uint64 // so that we aren't deduplicated by the network layer
}

CollectionRequest request all transactions from a collection with the given fingerprint.

type CollectionResponse 

type CollectionResponse struct {
	Collection flow.Collection
	Nonce      uint64 // so that we aren't deduplicated by the network layer
}

CollectionResponse is a response to a request for a collection.

type DKGMessage added in v0.20.0 

type DKGMessage struct {
	Data          []byte
	DKGInstanceID string
}

DKGMessage is the type of message exchanged between DKG nodes.

func NewDKGMessage added in v0.20.0 

func NewDKGMessage(data []byte, dkgInstanceID string) DKGMessage

NewDKGMessage creates a new DKGMessage.

type EntityRequest 

type EntityRequest struct {
	Nonce     uint64
	EntityIDs []flow.Identifier
}

EntityRequest is a request for a set of entities, each keyed by an identifier. The relationship between the identifiers and the entity is not specified here. In the typical case, the identifier is simply the ID of the entity being requested, but more complex identifier-entity relationships can be used as well.

type EntityResponse 

type EntityResponse struct {
	Nonce     uint64
	EntityIDs []flow.Identifier
	Blobs     [][]byte
}

EntityResponse is a response to an entity request, containing a set of serialized entities and the identifiers used to request them. The returned entity set may be empty or incomplete.

type PrivDKGMessageIn added in v0.20.0 

type PrivDKGMessageIn struct {
	DKGMessage
	CommitteeMemberIndex uint64 // CommitteeMemberIndex field is set when the message arrives at the Broker
	OriginID             flow.Identifier
}

PrivDKGMessageIn is a wrapper around a DKGMessage containing the network ID of the sender.

type PrivDKGMessageOut added in v0.20.0 

type PrivDKGMessageOut struct {
	DKGMessage
	DestID flow.Identifier
}

PrivDKGMessageOut is a wrapper around a DKGMessage containing the network ID of the destination.

type RangeRequest 

type RangeRequest struct {
	Nonce      uint64
	FromHeight uint64
	ToHeight   uint64
}

RangeRequest is part of the synchronization protocol and represents an active (pulling) attempt to synchronize with the consensus state of the network. It requests finalized blocks by a range of block heights, including from and to heights. All RangeRequest messages are validated before being processed. If validation fails, then a misbehavior report is created. See synchronization.validateRangeRequestForALSP for more details.

type SubmitCollectionGuarantee 

type SubmitCollectionGuarantee struct {
	Guarantee flow.CollectionGuarantee
}

SubmitCollectionGuarantee is a request to submit the given collection guarantee to consensus nodes. Only valid as a node-local message.

type SyncRequest 

type SyncRequest struct {
	Nonce  uint64
	Height uint64
}

SyncRequest is part of the synchronization protocol and represents a node on the network sharing the height of its latest finalized block and requesting the same information from the recipient. All SyncRequest messages are validated before being processed. If validation fails, then a misbehavior report is created. See synchronization.validateSyncRequestForALSP for more details.

type SyncResponse 

type SyncResponse struct {
	Nonce  uint64
	Height uint64
}

SyncResponse is part of the synchronization protocol and represents the reply to a synchronization request that contains the latest finalized block height of the responding node.

type TimeoutObject added in v0.29.0 

type TimeoutObject struct {
	TimeoutTick uint64
	View        uint64
	NewestQC    *flow.QuorumCertificate
	LastViewTC  *flow.TimeoutCertificate
	SigData     []byte
}

TimeoutObject is part of the consensus protocol and represents a consensus node timing out in given round. Contains a sequential number for deduplication purposes.

type UntrustedBlock added in v0.29.0 

type UntrustedBlock struct {
	Header  flow.Header
	Payload UntrustedBlockPayload
}

UntrustedBlock is a duplicate of flow.Block used within untrusted messages. It exists only to provide a memory-safe structure for decoding messages and should be replaced in the future by updating the core flow.Block type. Deprecated: Please update flow.Payload to use []flow.Guarantee etc., then replace instances of this type with flow.Block

func UntrustedBlockFromInternal added in v0.29.0 

func UntrustedBlockFromInternal(flowBlock *flow.Block) UntrustedBlock

UntrustedBlockFromInternal converts the internal flow.Block representation to the representation used in untrusted messages.

func (*UntrustedBlock) ToInternal added in v0.29.0 

func (ub *UntrustedBlock) ToInternal() *flow.Block

ToInternal returns the internal representation of the type.

type UntrustedBlockPayload added in v0.29.0 

type UntrustedBlockPayload struct {
	Guarantees      []flow.CollectionGuarantee
	Seals           []flow.Seal
	Receipts        []flow.ExecutionReceiptMeta
	Results         []UntrustedExecutionResult
	ProtocolStateID flow.Identifier
}

UntrustedBlockPayload is a duplicate of flow.Payload used within untrusted messages. It exists only to provide a memory-safe structure for decoding messages and should be replaced in the future by updating the core flow.Payload type. Deprecated: Please update flow.Payload to use []flow.Guarantee etc., then replace instances of this type with flow.Payload

type UntrustedClusterBlock added in v0.29.0 

type UntrustedClusterBlock struct {
	Header  flow.Header
	Payload UntrustedClusterBlockPayload
}

UntrustedClusterBlock is a duplicate of cluster.Block used within untrusted messages. It exists only to provide a memory-safe structure for decoding messages and should be replaced in the future by updating the core cluster.Block type. Deprecated: Please update cluster.Payload.Collection to use []flow.TransactionBody, then replace instances of this type with cluster.Block

func UntrustedClusterBlockFromInternal added in v0.29.0 

func UntrustedClusterBlockFromInternal(clusterBlock *cluster.Block) UntrustedClusterBlock

UntrustedClusterBlockFromInternal converts the internal cluster.Block representation to the representation used in untrusted messages.

func (*UntrustedClusterBlock) ToInternal added in v0.29.0 

func (ub *UntrustedClusterBlock) ToInternal() *cluster.Block

ToInternal returns the internal representation of the type.

type UntrustedClusterBlockPayload added in v0.29.0 

type UntrustedClusterBlockPayload struct {
	Collection       []flow.TransactionBody
	ReferenceBlockID flow.Identifier
}

UntrustedClusterBlockPayload is a duplicate of cluster.Payload used within untrusted messages. It exists only to provide a memory-safe structure for decoding messages and should be replaced in the future by updating the core cluster.Payload type. Deprecated: Please update cluster.Payload.Collection to use []flow.TransactionBody, then replace instances of this type with cluster.Payload

type UntrustedExecutionResult added in v0.29.0 

type UntrustedExecutionResult struct {
	PreviousResultID flow.Identifier
	BlockID          flow.Identifier
	Chunks           []flow.Chunk
	ServiceEvents    flow.ServiceEventList
	ExecutionDataID  flow.Identifier
}

UntrustedExecutionResult is a duplicate of flow.ExecutionResult used within untrusted messages. It exists only to provide a memory-safe structure for decoding messages and should be replaced in the future by updating the core flow.ExecutionResult type. Deprecated: Please update flow.ExecutionResult to use []flow.Chunk, then replace instances of this type with flow.ExecutionResult

func UntrustedExecutionResultFromInternal added in v0.29.0 

func UntrustedExecutionResultFromInternal(internal *flow.ExecutionResult) UntrustedExecutionResult

UntrustedExecutionResultFromInternal converts the internal flow.ExecutionResult representation to the representation used in untrusted messages.

func (*UntrustedExecutionResult) ToInternal added in v0.29.0 

func (ur *UntrustedExecutionResult) ToInternal() *flow.ExecutionResult

ToInternal returns the internal representation of the type.

Source Files

View all Source files

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL
go.dev uses cookies from Google to deliver and enhance the quality of its services and to analyze traffic. Learn more.