types

package
v0.37.10-fix-root-bloc... Latest Latest
Warning

This package is not in the latest version of its module.

 Go to latest Published: Sep 17, 2024 License: AGPL-3.0 Imports: 25 Imported by: 10

Documentation

Index

Constants

View Source 
const (
	// tx type 255 is used for direct calls from COAs
	DirectCallTxType = byte(255)

	UnknownCallSubType  = byte(0)
	DepositCallSubType  = byte(1)
	WithdrawCallSubType = byte(2)
	TransferCallSubType = byte(3)
	DeployCallSubType   = byte(4)
	ContractCallSubType = byte(5)

	// Note that these gas values might need to change if we
	// change the transaction (e.g. add access list),
	// then it has to be updated to use Intrinsic function
	// to calculate the minimum gas needed to run the transaction.
	IntrinsicFeeForTokenTransfer = gethParams.TxGas

	// 21_000 is the minimum for a transaction + max gas allowed for receive/fallback methods
	DefaultGasLimitForTokenTransfer = IntrinsicFeeForTokenTransfer + 2_300

	// the value is set to the gas limit for transfer to facilitate transfers
	// to smart contract addresses.
	DepositCallGasLimit  = DefaultGasLimitForTokenTransfer
	WithdrawCallGasLimit = DefaultGasLimitForTokenTransfer
)
View Source 
const (
	AggregatedPrecompiledCallsEncodingVersion  uint8 = 1
	AggregatedPrecompiledCallsEncodingByteSize int   = 1
)
View Source 
const AddressLength = gethCommon.AddressLength

AddressLength holds the number of bytes used for each EVM address

View Source 
const COAAddressTemplate = "A.%v.EVM.CadenceOwnedAccountCreated"
View Source 
const CadenceOwnedAccountCreatedTypeAddressFieldName = "address"
View Source 
const FlowEVMSpecialAddressPrefixLen = 12

FlowEVMSpecialAddressPrefixLen captures the number of prefix bytes with constant values for special accounts (extended precompiles and COAs).

The prefix length should insure a high-enough level of security against finding a pre-image using the hash function used for EVM addresses generation (Keccak256). This is required to avoid finding an EVM address that is also a valid FlowEVM address. The target (minimal) security in this case is the security level provided by EVM addresses. Since EVM addresses are 160-bits long, they offer only 80 bits of security (collision resistance offers the lowest level). A pre-image resistance of 80 bits requires the prefix to be at least 80-bits long (i.e 10 bytes). When used as a prefix in EVM addresses (20-bytes long), a prefix length of 12 bytes leaves a variable part of 8 bytes (64 bits).

View Source 
const InvalidTransactionGasCost = 1_000

InvalidTransactionGasCost is a gas cost we charge when a transaction or call fails at validation step. in typical evm environment this doesn't exist given if a transaction is invalid it won't be included and no fees can be charged for users even though the validation has used some resources, in our case given we charge the fees on flow transaction and we are doing on chain validation we can/should charge the user for the validation fee.

Variables

View Source 
var (
	// Using leading zeros for prefix helps with the storage compactness.
	//
	// Prefix for the built-in EVM precompiles
	FlowEVMNativePrecompileAddressPrefix = [FlowEVMSpecialAddressPrefixLen]byte{0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}
	// Prefix for the extended precompiles
	FlowEVMExtendedPrecompileAddressPrefix = [FlowEVMSpecialAddressPrefixLen]byte{0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1}
	// Prefix for the COA addresses
	FlowEVMCOAAddressPrefix = [FlowEVMSpecialAddressPrefixLen]byte{0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 2}
	// Coinbase address
	CoinbaseAddress = Address{0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 3, 0, 0, 0, 0, 0, 0, 0, 0}
)
View Source 
var (
	AttoScale                      = 18
	UFixedScale                    = fixedpoint.Fix64Scale
	UFixedToAttoConversionScale    = AttoScale - UFixedScale
	UFixToAttoConversionMultiplier = new(big.Int).Exp(big.NewInt(10), big.NewInt(int64(UFixedToAttoConversionScale)), nil)

	OneFlowInUFix64 = cadence.UFix64(uint64(math.Pow(10, float64(UFixedScale))))
	EmptyBalance    = Balance(new(big.Int))
)
View Source 
var (
	FlowEVMPreviewNetChainID = big.NewInt(646)
	FlowEVMTestNetChainID    = big.NewInt(545)
	FlowEVMMainNetChainID    = big.NewInt(747)
)
View Source 
var (
	// DefaultBlockLevelGasLimit is the default value for the block gas limit
	// currently set to maximum and we don't consider any limit
	// given number of included EVM transactions are naturally
	// limited by the Flow block production limits.
	DefaultBlockLevelGasLimit = uint64(math.MaxUint64)
	// DefaultBaseFee is the default base fee value for the block
	// is set to zero but can be updated by the config
	DefaultBaseFee = big.NewInt(0)

	// DefaultDirectCallBaseGasUsage holds the minimum gas
	// charge for direct calls
	DefaultDirectCallBaseGasUsage = uint64(21_000)
	// DefaultDirectCallGasPrice captures the default
	// gas price for the direct call.
	// its set to zero currently given that we charge
	// computation but we don't need to refund to any
	// coinbase account.
	DefaultDirectCallGasPrice = uint64(0)

	// anything block number above 0 works here
	BlockNumberForEVMRules = big.NewInt(1)
)
View Source 
var (
	// ErrInvalidBalance is returned when an invalid amount is provided for transfer or balance change (e.g. negative)
	ErrInvalidBalance = errors.New("invalid amount for transfer or balance change")

	// ErrInsufficientComputation is returned when not enough computation is
	// left in the context of flow transaction to execute the evm operation.
	ErrInsufficientComputation = errors.New("insufficient computation")

	// ErrUnauthorizedMethodCall method call, usually emitted when calls are called on EOA accounts
	ErrUnauthorizedMethodCall = errors.New("unauthorized method call")

	// ErrWithdrawBalanceRounding is returned when withdraw call has a balance that could
	// result in rounding error, i.e. the balance contains fractions smaller than 10^8 Flow (smallest unit allowed to transfer).
	ErrWithdrawBalanceRounding = errors.New("withdraw failed! the balance is susceptible to the rounding error")

	// ErrUnexpectedEmptyResult is returned when a result is expected to be returned by the emulator
	// but nil has been returned. This should never happen and is a safety error.
	ErrUnexpectedEmptyResult = errors.New("unexpected empty result has been returned")

	// ErrInsufficientTotalSupply is returned when flow token
	// withdraw request is received but not enough balance is on EVM native token vault
	// this should never happen but its a safety measure to protect Flow against EVM issues.
	ErrInsufficientTotalSupply = NewFatalError(errors.New("insufficient total supply"))

	// ErrNotImplemented is a fatal error when something is called that is not implemented
	ErrNotImplemented = NewFatalError(errors.New("a functionality is called that is not implemented"))
)
View Source 
var AddressBytesCadenceType = cadence.NewConstantSizedArrayType(AddressLength, cadence.UInt8Type)
View Source 
var AddressBytesSemaType = sema.ByteArrayType
View Source 
var EmptyAddress = Address(gethCommon.Address{})

EmptyAddress is an empty evm address

View Source 
var FlowAddressCadenceType = cadence.AddressType
View Source 
var FlowAddressSemaType = sema.TheAddressType
View Source 
var KeyIndicesCadenceType = cadence.NewVariableSizedArrayType(cadence.UInt64Type)
View Source 
var KeyIndicesSemaType = &sema.VariableSizedType{Type: sema.UInt64Type}
View Source 
var PublicPathCadenceType = cadence.PathType
View Source 
var PublicPathSemaType = sema.PathType
View Source 
var SignatureCadenceType = cadence.NewVariableSizedArrayType(cadence.UInt8Type)
View Source 
var SignaturesCadenceType = cadence.NewVariableSizedArrayType(SignatureCadenceType)
View Source 
var SignaturesSemaType = sema.ByteArrayArrayType
View Source 
var SignedDataCadenceType = cadence.NewVariableSizedArrayType(cadence.UInt8Type)
View Source 
var SignedDataSemaType = sema.ByteArrayType

Functions

func BalanceConversionToUFix64ProneToRoundingError added in v0.37.1 

func BalanceConversionToUFix64ProneToRoundingError(bal Balance) bool

BalanceConversionToUFix64ProneToRoundingError returns true if casting to UFix64 could result in rounding error

func BalanceToBigInt added in v0.33.30 

func BalanceToBigInt(bal Balance) *big.Int

BalanceToBigInt convert balance into big int

func BalancesAreEqual added in v0.36.2 

func BalancesAreEqual(bal1, bal2 Balance) bool

BalancesAreEqual returns true if balances are equal

func COAOwnershipProofSignatureCountFromEncoded added in v0.33.30 

func COAOwnershipProofSignatureCountFromEncoded(data []byte) (int, error)

func ConvertBalanceToUFix64 added in v0.33.30 

func ConvertBalanceToUFix64(bal Balance) (value cadence.UFix64, roundedOff bool, err error)

ConvertBalanceToUFix64 casts the balance into a UFix64,

Warning! The smallest unit of Flow token that a FlowVault (Cadence) could store is 1e10^-8, so transferring smaller values (or values with smalls fractions) could result in loss in conversion. The rounded flag should be used to prevent loss of assets.

func EVMChainIDFromFlowChainID added in v0.33.30 

func EVMChainIDFromFlowChainID(flowChainID flow.ChainID) *big.Int

func ErrorFromCode added in v0.33.30 

func ErrorFromCode(errorCode ErrorCode) error

func GenesisBlockHash added in v0.33.30 

func GenesisBlockHash(chainID flow.ChainID) gethCommon.Hash

GenesisBlockHash returns the genesis block hash in the EVM environment

func GenesisTimestamp added in v0.37.1 

func GenesisTimestamp(flowChainID flow.ChainID) uint64

GenesisTimestamp returns the block time stamp for EVM genesis block

func IsABackendError added in v0.33.30 

func IsABackendError(err error) bool

IsABackendError returns true if the error or any underlying errors is a backend error

func IsACOAAddress added in v0.33.30 

func IsACOAAddress(addr Address) bool

IsACOAAddress returns true if the address is a COA address

This test insures `addr` has been generated as a COA address with high probability. Brute forcing an EVM address `addr` to pass the `IsACOAAddress` test is as hard as the bit-length of `FlowEVMCOAAddressPrefix` (here 96 bits). Although this is lower than the protocol-wide security level in Flow (128 bits), it remains higher than the EVM addresses security (80 bits when considering collision attacks)

func IsAFatalError 

func IsAFatalError(err error) bool

IsAFatalError returns true if the error or underlying error is of fatal type.

func IsAInsufficientTotalSupplyError 

func IsAInsufficientTotalSupplyError(err error) bool

IsAInsufficientTotalSupplyError returns true if the error type is InsufficientTotalSupplyError

func IsAStateError 

func IsAStateError(err error) bool

IsAStateError returns true if the error or any underlying errors is a state error

func IsAUnauthorizedMethodCallError added in v0.36.4 

func IsAUnauthorizedMethodCallError(err error) bool

IsAUnauthorizedMethodCallError returns true if the error type is UnauthorizedMethodCallError

func IsAnExtendedPrecompileAddress added in v0.33.30 

func IsAnExtendedPrecompileAddress(addr Address) bool

IsAnExtendedPrecompileAddress returns true if the address is a extended precompile address

func IsWithdrawBalanceRoundingError added in v0.33.30 

func IsWithdrawBalanceRoundingError(err error) bool

IsWithdrawBalanceRoundingError returns true if the error type is ErrWithdrawBalanceRounding

func MakeBigIntInFlow added in v0.37.1 

func MakeBigIntInFlow(amount uint64) *big.Int

MakeBigIntInFlow makes big int containing `amount` of Flow

func OneFlow added in v0.35.17 

func OneFlow() *big.Int

OneFlow creates a big int including one flow

func UnsafeCastOfBalanceToFloat64 added in v0.36.3 

func UnsafeCastOfBalanceToFloat64(bal Balance) float64

UnsafeCastOfBalanceToFloat64 tries to cast the balance into a float64,

Warning! this method is only provided for logging and metric reporting purposes, using float64 for any actual computation result in non-determinism.

Types

type Account 

type Account interface {
	// Address returns the address of this account
	Address() Address

	// Balance returns the balance of this account
	Balance() Balance

	// Code returns the code of this account
	Code() Code

	// CodeHash returns the code hash of this account
	CodeHash() []byte

	// Nonce returns the nonce of this account
	Nonce() uint64

	// Deposit deposits the token from the given vault into this account
	Deposit(*FLOWTokenVault)

	// Withdraw withdraws the balance from account and
	// return it as a FlowTokenVault
	// works only for COAs
	Withdraw(Balance) *FLOWTokenVault

	// Transfer is a utility method on top of call for transferring tokens to another account
	Transfer(to Address, balance Balance)

	// Deploy deploys a contract to the environment
	// the new deployed contract would be at the returned
	// result address and the contract data is not controlled by the COA
	// works only for COAs
	Deploy(Code, GasLimit, Balance) *ResultSummary

	// Call calls a smart contract function with the given data.
	// The gas usage is limited by the given gas limit,
	// and the Flow transaction's computation limit.
	// The fees are deducted from the COA
	// and are transferred to the target address.
	// if no data is provided it would behave as transferring tokens to the
	// target address
	// works only for COAs
	Call(Address, Data, GasLimit, Balance) *ResultSummary
}

Account is an EVM account, currently three types of accounts are supported on Flow EVM, externally owned accounts (EOAs), smart contract accounts and cadence owned accounts Cadence-owned-account (COA) is a new type of account in the environment, that instead of being managed by public key, it is managed by a resource owned by a Flow account.

In other words, the FVM account who owns the FOA resource can bridge native tokens to and from the account associated with the COA, deploy contracts to the environment, or call methods on contracts without the need to sign a transaction.

type Address 

type Address gethCommon.Address

Address is an EVM-compatible address

func COAAddressFromFlowCOACreatedEvent added in v0.33.30 

func COAAddressFromFlowCOACreatedEvent(evmContractAddress flow.Address, event flow.Event) (Address, error)

func NewAddress 

func NewAddress(addr gethCommon.Address) Address

NewAddress constructs a new Address

func NewAddressFromBytes 

func NewAddressFromBytes(inp []byte) Address

NewAddressFromBytes constructs a new address from bytes

func NewAddressFromString 

func NewAddressFromString(str string) Address

NewAddressFromString constructs a new address from an string

func (Address) Bytes 

func (fa Address) Bytes() []byte

Bytes returns a byte slice for the address

func (Address) String added in v0.33.30 

func (fa Address) String() string

String returns the hex encoding of the address it returns empty string if address is empty

func (Address) ToCadenceValue added in v0.33.30 

func (a Address) ToCadenceValue() cadence.Array

func (Address) ToCommon 

func (fa Address) ToCommon() gethCommon.Address

ToCommon returns the geth address

type AddressAllocator 

type AddressAllocator interface {
	// AllocateAddress allocates an address to be used by a COA resource
	AllocateCOAAddress(uuid uint64) Address

	// COAFactoryAddress returns the address for the COA factory
	COAFactoryAddress() Address

	// NativeTokenBridgeAddress returns the address for the native token bridge
	// used for deposit and withdraw calls
	NativeTokenBridgeAddress() Address

	// AllocateAddress allocates an address by index to be used by a precompile contract
	AllocatePrecompileAddress(index uint64) Address
}

AddressAllocator allocates addresses, used by the handler

type AggregatedPrecompiledCalls added in v0.35.17 

type AggregatedPrecompiledCalls []PrecompiledCalls

AggregatedPrecompiledCalls aggregates a list of precompiled calls the list should be sorted by the address

func AggregatedPrecompileCallsFromEncoded added in v0.35.17 

func AggregatedPrecompileCallsFromEncoded(encoded []byte) (AggregatedPrecompiledCalls, error)

AggregatedPrecompileCallsFromEncoded constructs an AggregatedPrecompileCalls from encoded data

func (AggregatedPrecompiledCalls) Encode added in v0.35.17 

func (apc AggregatedPrecompiledCalls) Encode() ([]byte, error)

Encode encodes the aggregated precompile calls using rlp encoding if there is no underlying call, we encode to empty bytes to save space on transaction results (common case) TODO: In the future versions of the encoding we might skip encoding the inputs given it just takes space and not needed during execution time

func (AggregatedPrecompiledCalls) IsEmpty added in v0.35.17 

func (apc AggregatedPrecompiledCalls) IsEmpty() bool

IsEmpty returns true if all of the underlying precompiled calls are empty

type Backend 

type Backend interface {
	environment.ValueStore
	environment.Meter
	environment.EventEmitter
	environment.BlockInfo
	environment.RandomGenerator
	environment.ContractFunctionInvoker
	environment.UUIDGenerator
	environment.Tracer
	environment.EVMMetricsReporter
	environment.LoggerProvider
}

Backend provides a subset of the FVM environment functionality Any error returned by a Backend is expected to be a `FatalError` or a `BackendError`.

type BackendError added in v0.33.30 

type BackendError struct {
	// contains filtered or unexported fields
}

BackendError is a non-fatal error wraps errors returned from the backend

func NewBackendError added in v0.33.30 

func NewBackendError(rootCause error) BackendError

NewBackendError returns a new BackendError

func (BackendError) Error added in v0.33.30 

func (err BackendError) Error() string

func (BackendError) Unwrap added in v0.33.30 

func (err BackendError) Unwrap() error

Unwrap unwraps the underlying evm error

type Balance 

type Balance *big.Int

Balance represents the balance of an address in the evm environment (Flow EVM), balances are kept in atto-flow (1e-18 flow); the smallest denomination of FLOW token (similar to how Wei is used to store Eth) But A Cadence FLOW Vault uses a Cadence.UFix64 to store values in Flow, which means 1e-8 is the smallest value that can be stored on the vault. The balance here considers the highest precision (atto-flow) but utility function has been provided for conversion from/to UFix64 to prevent accidental conversion errors and dealing with rounding errors.

func AddBalance added in v0.33.30 

func AddBalance(bal1 Balance, bal2 Balance) (Balance, error)

AddBalance balance 2 to balance 1 and returns the result as a new balance

func CopyBalance added in v0.33.30 

func CopyBalance(inp Balance) Balance

CopyBalance creates a copy of the balance

func MakeABalanceInFlow added in v0.33.30 

func MakeABalanceInFlow(amount uint64) Balance

MakeABalanceInFlow makes a balance object that has `amount` Flow Token in it

func NewBalance added in v0.33.30 

func NewBalance(inp *big.Int) Balance

NewBalance constructs a new balance from an atto-flow value

func NewBalanceFromUFix64 added in v0.33.30 

func NewBalanceFromUFix64(inp cadence.UFix64) Balance

NewBalanceFromUFix64 constructs a new balance from flow value (how its stored in Cadence Flow)

func OneFlowBalance added in v0.33.30 

func OneFlowBalance() Balance

OneFlowBalance creates a new balance including one flow

func SubBalance added in v0.33.30 

func SubBalance(bal1 Balance, bal2 Balance) (Balance, error)

Subtract balance 2 from balance 1 and returns the result as a new balance

type BaseView 

type BaseView interface {
	ReadOnlyView

	// Creates a new account
	CreateAccount(
		addr gethCommon.Address,
		balance *uint256.Int,
		nonce uint64,
		code []byte,
		codeHash gethCommon.Hash,
	) error

	// UpdateAccount updates a account
	UpdateAccount(
		addr gethCommon.Address,
		balance *uint256.Int,
		nonce uint64,
		code []byte,
		codeHash gethCommon.Hash,
	) error

	// DeleteAccount deletes an account
	DeleteAccount(addr gethCommon.Address) error

	// UpdateSlot updates the value for the given slot in the main storage
	UpdateSlot(
		slot SlotAddress,
		value gethCommon.Hash,
	) error

	// Commit commits the changes
	Commit() error
}

BaseView is a low-level mutable view of the state baseview is usually updated at the commit calls to the higher level view

type Block 

type Block struct {
	// the hash of the parent block
	ParentBlockHash gethCommon.Hash

	// Height returns the height of this block
	Height uint64

	// Timestamp is a Unix timestamp in seconds at which the block was created
	// Note that this value must be provided from the FVM Block
	Timestamp uint64

	// holds the total amount of the native token deposited in the evm side. (in attoflow)
	TotalSupply *big.Int

	// ReceiptRoot returns the root hash of the receipts emitted in this block
	// Note that this value won't be unique to each block, for example for the
	// case of empty trie of receipts or a single receipt with no logs and failed state
	// the same receipt root would be reported for block.
	ReceiptRoot gethCommon.Hash

	// TransactionHashRoot returns the root hash of the transaction hashes
	// included in this block.
	// Note that despite similar functionality this is a bit different than TransactionRoot
	// provided by Ethereum. TransactionRoot constructs a Merkle proof with leafs holding
	// encoded transactions as values. But TransactionHashRoot uses transaction hash
	// values as node values. Proofs are still compatible but might require an extra hashing step.
	TransactionHashRoot gethCommon.Hash

	// TotalGasUsed stores gas used by all transactions included in the block.
	TotalGasUsed uint64

	// PrevRandao is the value returned for block.prevrandao opcode
	PrevRandao gethCommon.Hash
}

Block represents a evm block. It captures block info such as height and state

func GenesisBlock 

func GenesisBlock(chainID flow.ChainID) *Block

GenesisBlock returns the genesis block in the EVM environment

func NewBlock 

func NewBlock(
	parentBlockHash gethCommon.Hash,
	height uint64,
	timestamp uint64,
	totalSupply *big.Int,
	prevRandao gethCommon.Hash,
) *Block

NewBlock constructs a new block

func NewBlockFromBytes 

func NewBlockFromBytes(encoded []byte) (*Block, error)

NewBlockFromBytes constructs a new block from encoded data

func (*Block) Hash 

func (b *Block) Hash() (gethCommon.Hash, error)

Hash returns the hash of the block

func (*Block) ToBytes 

func (b *Block) ToBytes() ([]byte, error)

ToBytes encodes the block into bytes

type BlockContext 

type BlockContext struct {
	ChainID                *big.Int
	BlockNumber            uint64
	BlockTimestamp         uint64
	DirectCallBaseGasUsage uint64
	DirectCallGasPrice     uint64
	TxCountSoFar           uint
	TotalGasUsedSoFar      uint64
	GasFeeCollector        Address
	GetHashFunc            func(n uint64) gethCommon.Hash
	Random                 gethCommon.Hash
	Tracer                 *tracers.Tracer

	// a set of extra precompiled contracts to be injected
	ExtraPrecompiledContracts []PrecompiledContract
}

BlockContext holds the context needed for the emulator operations

func NewDefaultBlockContext 

func NewDefaultBlockContext(BlockNumber uint64) BlockContext

NewDefaultBlockContext returns a new default block context

type BlockProposal added in v0.36.2 

type BlockProposal struct {
	Block

	// Receipts keeps a order list of light receipts generated during block execution
	Receipts []LightReceipt

	// TxHashes keeps transaction hashes included in this block proposal
	TxHashes TransactionHashes
}

BlockProposal is a EVM block proposal holding all the interim data of block before commitment

func NewBlockProposal added in v0.36.2 

func NewBlockProposal(
	parentBlockHash gethCommon.Hash,
	height uint64,
	timestamp uint64,
	totalSupply *big.Int,
	prevRandao gethCommon.Hash,
) *BlockProposal

func NewBlockProposalFromBytes added in v0.36.2 

func NewBlockProposalFromBytes(encoded []byte) (*BlockProposal, error)

NewBlockProposalFromBytes constructs a new block proposal from encoded data

func (*BlockProposal) AppendTransaction added in v0.36.2 

func (b *BlockProposal) AppendTransaction(res *Result)

AppendTransaction appends a transaction hash to the list of transaction hashes of the block and also update the receipts

func (*BlockProposal) PopulateReceiptRoot added in v0.36.2 

func (b *BlockProposal) PopulateReceiptRoot()

PopulateReceiptRoot sets the receiptRoot

func (*BlockProposal) PopulateRoots added in v0.36.2 

func (b *BlockProposal) PopulateRoots()

PopulateRoots populates receiptRoot and transactionHashRoot

func (*BlockProposal) PopulateTransactionHashRoot added in v0.36.2 

func (b *BlockProposal) PopulateTransactionHashRoot()

PopulateTransactionHashRoot sets the transactionHashRoot

func (*BlockProposal) ToBytes added in v0.36.2 

func (b *BlockProposal) ToBytes() ([]byte, error)

ToBytes encodes the block proposal into bytes

type BlockProposalV0 added in v0.37.5 

type BlockProposalV0 struct {
	BlockV0
	Receipts []LightReceipt
	TxHashes TransactionHashes
}

type BlockStore 

type BlockStore interface {
	// LatestBlock returns the latest appended block
	LatestBlock() (*Block, error)

	// BlockHash returns the hash of the block at the given height
	BlockHash(height uint64) (gethCommon.Hash, error)

	// BlockProposal returns the active block proposal
	BlockProposal() (*BlockProposal, error)

	// UpdateBlockProposal replaces the current block proposal with the ones passed
	UpdateBlockProposal(*BlockProposal) error

	// CommitBlockProposal commits the block proposal and update the chain of blocks
	CommitBlockProposal(*BlockProposal) error
}

BlockStore stores the chain of blocks

type BlockV0 added in v0.37.5 

type BlockV0 struct {
	ParentBlockHash     gethCommon.Hash
	Height              uint64
	Timestamp           uint64
	TotalSupply         *big.Int
	ReceiptRoot         gethCommon.Hash
	TransactionHashRoot gethCommon.Hash
	TotalGasUsed        uint64
}

before adding PrevRandao to the block

type BlockView 

type BlockView interface {
	// DirectCall executes a direct call
	DirectCall(call *DirectCall) (*Result, error)

	// RunTransaction executes an evm transaction
	RunTransaction(tx *gethTypes.Transaction) (*Result, error)

	// DryRunTransaction executes unsigned transaction but does not persist the state changes,
	// since transaction is not signed, from address is used as the signer.
	DryRunTransaction(tx *gethTypes.Transaction, from gethCommon.Address) (*Result, error)

	// BatchRunTransactions executes a batch of evm transactions producing
	// a slice of execution Result where each result corresponds to each
	// item in the txs slice.
	BatchRunTransactions(txs []*gethTypes.Transaction) ([]*Result, error)
}

BlockView facilitates execution of a transaction or a direct evm call in the context of a block Any error returned by any of the methods (e.g. stateDB errors) if non-fatal stops the outer flow transaction if fatal stops the node. EVM validation errors and EVM execution errors are part of the returned result and should be handled separately.

type COAOwnershipProof added in v0.33.30 

type COAOwnershipProof struct {
	KeyIndices     KeyIndices
	Address        FlowAddress
	CapabilityPath PublicPath
	Signatures     Signatures
}

COAOwnershipProof is a proof that a flow account controls a COA resource. To do so, the flow account (Address is address of this account) provides signatures (with proper total weights) over an arbitrary data input set by proof requester. KeyIndices captures, which account keys has been used for signatures. Beside signatures, it provides the CapabilityPath where the resource EVMAddress capability is stored.

func COAOwnershipProofFromEncoded added in v0.33.30 

func COAOwnershipProofFromEncoded(data []byte) (*COAOwnershipProof, error)

func (*COAOwnershipProof) Encode added in v0.33.30 

func (p *COAOwnershipProof) Encode() ([]byte, error)

type COAOwnershipProofInContext added in v0.33.30 

type COAOwnershipProofInContext struct {
	COAOwnershipProof
	SignedData SignedData
	EVMAddress Address
}

COAOwnershipProofInContext contains all the data needed to verify a COAOwnership proof. The proof is verified by checking the signatures over the input signed data (SignedData), then loading the resource capability from the provided path in the proof, and at last checking if the EVMAddress of the resource matches the provided one.

func NewCOAOwnershipProofInContext added in v0.33.30 

func NewCOAOwnershipProofInContext(sd []byte, addr Address, encodedProof []byte) (*COAOwnershipProofInContext, error)

func (*COAOwnershipProofInContext) ToCadenceValues added in v0.33.30 

func (proof *COAOwnershipProofInContext) ToCadenceValues() []cadence.Value

type Code 

type Code []byte

Code holds an smart contract code

type ContractHandler 

type ContractHandler interface {
	// DeployCOA deploys a Cadence owned account and return the address
	DeployCOA(uuid uint64) Address

	// AccountByAddress returns an account by address
	// if isAuthorized is set, it allows for functionality like `call`, `deploy`
	// should only be set for the cadence owned accounts only.
	AccountByAddress(address Address, isAuthorized bool) Account

	// LastExecutedBlock returns information about the last executed block
	LastExecutedBlock() *Block

	// Run runs a transaction in the evm environment,
	// collects the gas fees, and transfers it to the gasFeeCollector account
	Run(tx []byte, gasFeeCollector Address) *ResultSummary

	// DryRun simulates execution of the provided RLP-encoded and unsigned transaction.
	// Because the transaction is unsigned the from address is required, since
	// from address is normally derived from the transaction signature.
	// The function should not have any persisted changes made to the state.
	DryRun(tx []byte, from Address) *ResultSummary

	// BatchRun runs transaction batch in the evm environment,
	// collect all the gas fees and transfers the gas fees to the gasFeeCollector account.
	BatchRun(txs [][]byte, gasFeeCollector Address) []*ResultSummary

	// FlowTokenAddress returns the address where FLOW token is deployed
	FlowTokenAddress() common.Address

	// EVMContractAddress returns the address where EVM is deployed
	EVMContractAddress() common.Address

	// GenerateResourceUUID generates a new UUID for a resource
	GenerateResourceUUID() uint64

	// Constructs and commits a new block from the block proposal
	CommitBlockProposal()
}

ContractHandler handles operations on the evm environment

type Data 

type Data []byte

Data holds the data passed as part of a call

func (Data) AsBigInt 

func (d Data) AsBigInt() *big.Int

AsBigInt process the data and return it as a big integer

type DirectCall 

type DirectCall struct {
	Type     byte
	SubType  byte
	From     Address
	To       Address
	Data     []byte
	Value    *big.Int
	GasLimit uint64
	Nonce    uint64
}

DirectCall captures all the data related to a direct call to evm direct calls are similar to transactions but they don't have signatures and don't need sequence number checks Note that while we don't check the nonce, it impacts hash calculation and also impacts the address of resulting contract when deployed through direct calls. Users don't have the worry about the nonce, handler sets it to the right value.

func DirectCallFromEncoded added in v0.33.30 

func DirectCallFromEncoded(encoded []byte) (*DirectCall, error)

DirectCallFromEncoded constructs a DirectCall from encoded data

func NewContractCall 

func NewContractCall(
	caller Address,
	to Address,
	data Data,
	gasLimit uint64,
	value *big.Int,
	nonce uint64,
) *DirectCall

NewContractCall constructs a new contract call

func NewDeployCall 

func NewDeployCall(
	caller Address,
	code Code,
	gasLimit uint64,
	value *big.Int,
	nonce uint64,
) *DirectCall

NewDeployCall constructs a new deploy direct call

func NewDeployCallWithTargetAddress added in v0.33.30 

func NewDeployCallWithTargetAddress(
	caller Address,
	to Address,
	code Code,
	gasLimit uint64,
	value *big.Int,
	nonce uint64,
) *DirectCall

NewDeployCallWithTargetAddress constructs a new deployment call for the given target address

Warning! This subtype should only be used internally for deploying contracts at given addresses (e.g. COA account init setup) should not be used for other means.

func NewDepositCall 

func NewDepositCall(
	bridge Address,
	address Address,
	amount *big.Int,
	nonce uint64,
) *DirectCall

NewDepositCall constructs a new deposit direct call

func NewTransferCall 

func NewTransferCall(
	from Address,
	to Address,
	amount *big.Int,
	nonce uint64,
) *DirectCall

func NewWithdrawCall 

func NewWithdrawCall(
	bridge Address,
	address Address,
	amount *big.Int,
	nonce uint64,
) *DirectCall

NewDepositCall constructs a new withdraw direct call

func (*DirectCall) EmptyToField added in v0.33.30 

func (dc *DirectCall) EmptyToField() bool

EmptyToField returns true if `to` field contains an empty address

func (*DirectCall) Encode 

func (dc *DirectCall) Encode() ([]byte, error)

Encode encodes the direct call it also adds the type as the very first byte, similar to how evm encodes types.

func (*DirectCall) Hash 

func (dc *DirectCall) Hash() gethCommon.Hash

Hash computes the hash of a direct call

func (*DirectCall) Message 

func (dc *DirectCall) Message() *gethCore.Message

Message constructs a core.Message from the direct call

func (*DirectCall) Transaction added in v0.33.30 

func (dc *DirectCall) Transaction() *gethTypes.Transaction

Transaction constructs a geth.Transaction from the direct call

type Emulator 

type Emulator interface {
	// constructs a new block view
	NewReadOnlyBlockView(ctx BlockContext) (ReadOnlyBlockView, error)

	// constructs a new block
	NewBlockView(ctx BlockContext) (BlockView, error)
}

Emulator emulates an evm-compatible chain

type ErrorCode added in v0.33.30 

type ErrorCode uint16
const (
	ErrCodeNoError ErrorCode = 0

	// covers all other validation codes that doesn't have an specific code
	ValidationErrCodeMisc ErrorCode = 100

	// general execution error returned for cases that don't have an specific code
	ExecutionErrCodeMisc ErrorCode = 400
)

internal error codes 

const (
	// the nonce of the tx is lower than the expected
	ValidationErrCodeNonceTooLow ErrorCode = iota + 201
	// the nonce of the tx is higher than the expected
	ValidationErrCodeNonceTooHigh
	// tx sender account has reached to the maximum nonce
	ValidationErrCodeNonceMax
	// not enough gas is available on the block to include this transaction
	ValidationErrCodeGasLimitReached
	// the transaction sender doesn't have enough funds for transfer(topmost call only).
	ValidationErrCodeInsufficientFundsForTransfer
	// creation transaction provides the init code bigger than init code size limit.
	ValidationErrCodeMaxInitCodeSizeExceeded
	// the total cost of executing a transaction is higher than the balance of the user's account.
	ValidationErrCodeInsufficientFunds
	// overflow detected when calculating the gas usage
	ValidationErrCodeGasUintOverflow
	// the transaction is specified to use less gas than required to start the invocation.
	ValidationErrCodeIntrinsicGas
	// the transaction is not supported in the current network configuration.
	ValidationErrCodeTxTypeNotSupported
	// tip was set to higher than the total fee cap
	ValidationErrCodeTipAboveFeeCap
	// an extremely big numbers is set for the tip field
	ValidationErrCodeTipVeryHigh
	// an extremely big numbers is set for the fee cap field
	ValidationErrCodeFeeCapVeryHigh
	// the transaction fee cap is less than the base fee of the block
	ValidationErrCodeFeeCapTooLow
	// the sender of a transaction is a contract
	ValidationErrCodeSenderNoEOA
	// the transaction fee cap is less than the blob gas fee of the block.
	ValidationErrCodeBlobFeeCapTooLow
)

geth evm core errors (reserved range: [201-300) ) 

const (
	// execution ran out of gas
	ExecutionErrCodeOutOfGas ErrorCode = iota + 301
	// contract creation code storage out of gas
	ExecutionErrCodeCodeStoreOutOfGas
	// max call depth exceeded
	ExecutionErrCodeDepth
	// insufficient balance for transfer
	ExecutionErrCodeInsufficientBalance
	// contract address collision"
	ExecutionErrCodeContractAddressCollision
	// execution reverted
	ExecutionErrCodeExecutionReverted
	// max initcode size exceeded
	ExecutionErrCodeMaxInitCodeSizeExceeded
	// max code size exceeded
	ExecutionErrCodeMaxCodeSizeExceeded
	// invalid jump destination
	ExecutionErrCodeInvalidJump
	// write protection
	ExecutionErrCodeWriteProtection
	// return data out of bounds
	ExecutionErrCodeReturnDataOutOfBounds
	// gas uint64 overflow
	ExecutionErrCodeGasUintOverflow
	// invalid code: must not begin with 0xef
	ExecutionErrCodeInvalidCode
	// nonce uint64 overflow
	ExecutionErrCodeNonceUintOverflow
)

evm execution errors (reserved range: [301-400) )

func ExecutionErrorCode added in v0.33.30 

func ExecutionErrorCode(err error) ErrorCode

func ValidationErrorCode added in v0.33.30 

func ValidationErrorCode(err error) ErrorCode

type FLOWTokenVault 

type FLOWTokenVault struct {
	// contains filtered or unexported fields
}

FLOWTokenVault holds a balance of flow token

func NewFlowTokenVault 

func NewFlowTokenVault(balance Balance) *FLOWTokenVault

func (*FLOWTokenVault) Balance 

func (t *FLOWTokenVault) Balance() Balance

func (*FLOWTokenVault) Deposit 

func (t *FLOWTokenVault) Deposit(inp *FLOWTokenVault) error

func (*FLOWTokenVault) Withdraw 

func (t *FLOWTokenVault) Withdraw(b Balance) (*FLOWTokenVault, error)

type FatalError 

type FatalError struct {
	// contains filtered or unexported fields
}

FatalError is used for any error that is not user related and something unusual has happened. Usually we stop the node when this happens given it might have a non-deterministic root.

func NewFatalError 

func NewFatalError(rootCause error) FatalError

NewFatalError returns a new FatalError

func (FatalError) Error 

func (err FatalError) Error() string

func (FatalError) Unwrap 

func (err FatalError) Unwrap() error

Unwrap unwraps the underlying fatal error

type FlowAddress added in v0.33.30 

type FlowAddress flow.Address

func (FlowAddress) ToCadenceValue added in v0.33.30 

func (addr FlowAddress) ToCadenceValue() cadence.Address

type GasLimit 

type GasLimit uint64

GasLimit sets the limit for the total gas used by a transaction

type HotView 

type HotView interface {
	ReadOnlyView

	// CreateAccount creates a new account
	CreateAccount(gethCommon.Address) error
	// CreateContract is used whenever a contract is created. This may be preceded
	// by CreateAccount, but that is not required if it already existed in the
	// state due to funds sent beforehand.
	CreateContract(gethCommon.Address)
	// SelfDestruct set the flag for destruction of the account after execution
	SelfDestruct(gethCommon.Address) error

	// SubBalance subtracts the amount from the balance the given address
	SubBalance(gethCommon.Address, *uint256.Int) error
	// AddBalance adds the amount to the balance of the given address
	AddBalance(gethCommon.Address, *uint256.Int) error
	// SetNonce sets the nonce for the given address
	SetNonce(gethCommon.Address, uint64) error
	// SetCode sets the code for the given address
	SetCode(gethCommon.Address, []byte) error

	// SetState sets a value for the given slot in the main storage
	SetState(SlotAddress, gethCommon.Hash) error
	// SetTransientState sets a value for the given slot in the transient storage
	SetTransientState(SlotAddress, gethCommon.Hash)

	// AddRefund adds the amount to the total (gas) refund
	AddRefund(uint64) error
	// SubRefund subtracts the amount from the total (gas) refund
	SubRefund(uint64) error

	// AddAddressToAccessList adds an address to the per-transaction access list
	AddAddressToAccessList(addr gethCommon.Address) (addressAdded bool)
	// AddSlotToAccessList adds a slot to the per-transaction access list
	AddSlotToAccessList(SlotAddress) (addressAdded, slotAdded bool)

	// AddLog append a log to the log collection
	AddLog(*gethTypes.Log)
	// AddPreimage adds a preimage to the list of preimages (input -> hash mapping)
	AddPreimage(gethCommon.Hash, []byte)
}

HotView captures a high-level mutable view of the state

type KeyIndices added in v0.33.30 

type KeyIndices []uint64

func (KeyIndices) Count added in v0.33.30 

func (ki KeyIndices) Count() int

func (KeyIndices) ToCadenceValue added in v0.33.30 

func (ki KeyIndices) ToCadenceValue() cadence.Array

type LightLog added in v0.36.2 

type LightLog struct {
	// address of the contract that generated the event
	Address common.Address
	// list of topics provided by the contract.
	Topics []common.Hash
	// supplied by the contract, usually ABI-encoded
	Data []byte
}

LightLog captures only consensus fields of an EVM log used by the LightReceipt

type LightReceipt added in v0.36.2 

type LightReceipt struct {
	Type              uint8
	Status            uint8
	CumulativeGasUsed uint64
	Logs              []LightLog
}

LightReceipt captures only the consensus fields of a receipt, making storage of receipts for the purpose of trie building more storage efficient.

Note that we don't store Bloom as we can reconstruct it later. We don't have PostState and we use a uint8 for status as there is currently only acts as boolean. Data shows that using the light receipt results in 60% storage reduction for block proposals and the extra overheads are manageable.

func (*LightReceipt) ToReceipt added in v0.36.2 

func (lr *LightReceipt) ToReceipt() *gethTypes.Receipt

ToReceipt constructs a Receipt from the LightReceipt Warning, this only populates the consensus fields and if you want the full data, use the receipt from the result.

type PrecompiledCalls added in v0.35.17 

type PrecompiledCalls struct {
	Address          Address
	RequiredGasCalls []RequiredGasCall
	RunCalls         []RunCall
}

PrecompiledCalls captures all the calls to a precompiled contract

func (*PrecompiledCalls) IsEmpty added in v0.35.17 

func (pc *PrecompiledCalls) IsEmpty() bool

IsEmpty returns true if no requiredGas or run calls is captured

type PrecompiledContract added in v0.35.17 

type PrecompiledContract interface {
	// PrecompiledContract provides an interface for
	// calling requiredGas and run
	gethVM.PrecompiledContract
	// Address returns the address where the precompile is deployed
	Address() Address
}

PrecompiledContract wraps gethVM precompiles with functionality to return where the contract is deployed

type PublicPath added in v0.33.30 

type PublicPath string

func (PublicPath) ToCadenceValue added in v0.33.30 

func (p PublicPath) ToCadenceValue() cadence.Path

type ReadOnlyBlockView 

type ReadOnlyBlockView interface {
	// BalanceOf returns the balance of this address
	BalanceOf(address Address) (*big.Int, error)
	// NonceOf returns the nonce of this address
	NonceOf(address Address) (uint64, error)
	// CodeOf returns the code for this address
	CodeOf(address Address) (Code, error)
	// CodeHashOf returns the code hash for this address
	CodeHashOf(address Address) ([]byte, error)
}

ReadOnlyBlockView provides a read only view of a block

type ReadOnlyView 

type ReadOnlyView interface {
	// Exist returns true if the address exist in the state
	Exist(gethCommon.Address) (bool, error)
	// IsCreated returns true if address has been created in this tx
	IsCreated(gethCommon.Address) bool
	// IsNewContract returns true if address is a new contract
	// either is a new account or it had balance but no code before
	IsNewContract(addr gethCommon.Address) bool
	// HasSelfDestructed returns true if an address has self destructed
	// it also returns the balance of address before selfdestruction call
	HasSelfDestructed(gethCommon.Address) (bool, *uint256.Int)
	// GetBalance returns the balance of an address
	GetBalance(gethCommon.Address) (*uint256.Int, error)
	// GetNonce returns the nonce of an address
	GetNonce(gethCommon.Address) (uint64, error)
	// GetCode returns the code of an address
	GetCode(gethCommon.Address) ([]byte, error)
	// GetCodeHash returns the code hash of an address
	GetCodeHash(gethCommon.Address) (gethCommon.Hash, error)
	// GetCodeSize returns the code size of an address
	GetCodeSize(gethCommon.Address) (int, error)
	// GetState returns values for an slot in the main storage
	GetState(SlotAddress) (gethCommon.Hash, error)
	// GetStorageRoot returns some sort of root for the given address.
	// Warning! Since StateDB doesn't construct a Merkel tree under the hood,
	// the behavior of this endpoint is as follow:
	// - if an account doesn't exist it returns common.Hash{}
	// - if account is EOA it returns gethCommon.EmptyRootHash
	// - else it returns a unique hash value as the root but this returned
	GetStorageRoot(gethCommon.Address) (gethCommon.Hash, error)
	// GetTransientState returns values for an slot transient storage
	GetTransientState(SlotAddress) gethCommon.Hash
	// GetRefund returns the total amount of (gas) refund
	GetRefund() uint64
	// AddressInAccessList checks if an address is in the access list
	AddressInAccessList(gethCommon.Address) bool
	// SlotInAccessList checks if a slot is in the access list
	SlotInAccessList(SlotAddress) (addressOk bool, slotOk bool)
}

ReadOnlyView provides a readonly view of the state

type RequiredGasCall added in v0.35.17 

type RequiredGasCall struct {
	Input  []byte
	Output uint64
}

RunCall captures a call to the RequiredGas method of a precompiled contract

type Result 

type Result struct {
	// captures error returned during validation step (pre-checks)
	ValidationError error
	// captures error returned by the EVM
	VMError error
	// type of transaction defined by the evm package
	// see DirectCallTxType as extra type we added type for direct calls.
	TxType uint8
	// total gas consumed during execution
	GasConsumed uint64
	// total gas used by the block after this tx execution
	CumulativeGasUsed uint64
	// total gas refunds after transaction execution
	GasRefund uint64
	// the address where the contract is deployed (if any)
	DeployedContractAddress *Address
	// returned data from a function call
	ReturnedData []byte
	// EVM logs (events that are emitted by evm)
	Logs []*gethTypes.Log
	// TX hash holds the cached value of tx hash
	TxHash gethCommon.Hash
	// transaction block inclusion index
	Index uint16
	// PrecompiledCalls captures an encoded list of calls to the precompile
	// during the execution of transaction
	PrecompiledCalls []byte
}

Result captures the result of an interaction to the emulator it could be the output of a direct call or output of running an evm transaction. Its more comprehensive than typical evm receipt, usually the receipt generation requires some extra calculation (e.g. Deployed contract address) but we take a different approach here and include more data so that it requires less work for anyone who tracks and consume results.

func NewInvalidResult added in v0.33.30 

func NewInvalidResult(tx *gethTypes.Transaction, err error) *Result

NewInvalidResult creates a new result that hold transaction validation error as well as the defined gas cost for validation.

func (*Result) Failed 

func (res *Result) Failed() bool

Failed returns true if transaction has been executed but VM has returned some error

func (*Result) Invalid added in v0.33.30 

func (res *Result) Invalid() bool

Invalid returns true if transaction has been rejected

func (*Result) LightReceipt added in v0.36.2 

func (res *Result) LightReceipt() *LightReceipt

LightReceipt constructs a light receipt from the result that is used for storing in block proposal.

func (*Result) Receipt 

func (res *Result) Receipt() *gethTypes.Receipt

Receipt constructs an EVM-style receipt can be used by json-rpc and other integration to be returned.

This is method is also used to construct block receipt root hash which requires the return receipt satisfy RLP encoding and cover these fields Type (txType), PostState or Status, CumulativeGasUsed, Logs and Logs Bloom and for each log, Address, Topics, Data (consensus fields) During execution we also do fill in BlockNumber, TxIndex, Index (event index)

func (*Result) ResultSummary added in v0.33.30 

func (res *Result) ResultSummary() *ResultSummary

ResultSummary constructs a result summary

func (*Result) SetValidationError added in v0.33.30 

func (res *Result) SetValidationError(err error)

SetValidationError sets the validation error and also sets the gas used to the fixed invalid gas usage

func (*Result) Successful added in v0.33.30 

func (res *Result) Successful() bool

Successful returns true if transaction has been executed without any errors

func (*Result) VMErrorString added in v0.33.30 

func (res *Result) VMErrorString() string

returns the VM error as an string, if no error it returns an empty string

type ResultSummary added in v0.33.30 

type ResultSummary struct {
	Status                  Status
	ErrorCode               ErrorCode
	ErrorMessage            string
	GasConsumed             uint64
	GasRefund               uint64
	DeployedContractAddress *Address
	ReturnedData            Data
}

ResultSummary summarizes the outcome of a EVM call or tx run

type RunCall added in v0.35.17 

type RunCall struct {
	Input    []byte
	Output   []byte
	ErrorMsg string
}

RunCall captures a call to the Run method of a precompiled contract

type Signature added in v0.33.30 

type Signature []byte

func (Signature) ToCadenceValue added in v0.33.30 

func (s Signature) ToCadenceValue() cadence.Array

type Signatures added in v0.33.30 

type Signatures []Signature

func (Signatures) Count added in v0.33.30 

func (ss Signatures) Count() int

func (Signatures) ToCadenceValue added in v0.33.30 

func (ss Signatures) ToCadenceValue() cadence.Array

type SignedData added in v0.33.30 

type SignedData []byte

func (SignedData) ToCadenceValue added in v0.33.30 

func (sd SignedData) ToCadenceValue() cadence.Array

type SlotAddress 

type SlotAddress struct {
	Address gethCommon.Address
	Key     gethCommon.Hash
}

SlotAddress captures an address to a storage slot

type StateDB 

type StateDB interface {
	gethVM.StateDB

	// Commit commits the changes
	// setting `finalize` flag
	// calls a subsequent call to Finalize
	// defering finalization and calling it once at the end
	// improves efficiency of batch operations.
	Commit(finalize bool) error

	// Finalize flushes all the changes
	// to the permanent storage
	Finalize() error

	// Logs collects and prepares logs
	Logs(
		blockNumber uint64,
		txHash gethCommon.Hash,
		txIndex uint,
	) []*gethTypes.Log

	// Preimages returns a map of preimages
	Preimages() map[gethCommon.Hash][]byte

	// Reset resets uncommitted changes and transient artifacts such as error, logs,
	// preimages, access lists, ...
	// The method is often called between execution of different transactions
	Reset()

	// Error returns any error that has been cached so far by the state.
	Error() error
}

StateDB acts as the main interface to the EVM runtime

type StateError 

type StateError struct {
	// contains filtered or unexported fields
}

StateError is a non-fatal error, returned when a state operation has failed (e.g. reaching storage interaction limit)

func NewStateError 

func NewStateError(rootCause error) StateError

NewStateError returns a new StateError

func (StateError) Error 

func (err StateError) Error() string

func (StateError) Unwrap 

func (err StateError) Unwrap() error

Unwrap unwraps the underlying evm error

type Status added in v0.33.30 

type Status uint8

Status captures the status of an interaction to the emulator 

var (
	StatusUnknown Status = 0
	// StatusInvalid shows that the transaction was not a valid
	// transaction and rejected to be executed and included in any block.
	StatusInvalid Status = 1
	// StatusFailed shows that the transaction has been executed,
	// but the output of the execution was an error
	// for this case a block is formed and receipts are available
	StatusFailed Status = 2
	// StatusSuccessful shows that the transaction has been executed and the execution has returned success
	// for this case a block is formed and receipts are available
	StatusSuccessful Status = 3
)

type TransactionHashes added in v0.36.2 

type TransactionHashes []gethCommon.Hash

func (TransactionHashes) EncodeIndex added in v0.36.2 

func (t TransactionHashes) EncodeIndex(index int, buffer *bytes.Buffer)

func (TransactionHashes) Len added in v0.36.2 

func (t TransactionHashes) Len() int

func (TransactionHashes) RootHash added in v0.36.2 

func (t TransactionHashes) RootHash() gethCommon.Hash

Source Files

View all Source files

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL
go.dev uses cookies from Google to deliver and enhance the quality of its services and to analyze traffic. Learn more.