Documentation
¶
Index ¶
- Constants
- type Compactor
- type Ledger
- func (l *Ledger) Checkpointer() (*realWAL.Checkpointer, error)
- func (l *Ledger) CollectStats(payloadCallBack func(payload *ledger.Payload)) (*LedgerStats, error)
- func (l *Ledger) Done() <-chan struct{}
- func (l *Ledger) DumpTrieAsJSON(state ledger.State, writer io.Writer) error
- func (l *Ledger) FindTrieByStateCommit(commitment flow.StateCommitment) (*trie.MTrie, error)
- func (l *Ledger) ForestSize() int
- func (l *Ledger) Get(query *ledger.Query) (values []ledger.Value, err error)
- func (l *Ledger) GetSingleValue(query *ledger.QuerySingleValue) (value ledger.Value, err error)
- func (l *Ledger) HasState(state ledger.State) bool
- func (l *Ledger) InitialState() ledger.State
- func (l *Ledger) MemSize() (int64, error)
- func (l *Ledger) MigrateAt(state ledger.State, migrations []ledger.Migration, ...) (*trie.MTrie, error)
- func (l *Ledger) MostRecentTouchedState() (ledger.State, error)
- func (l *Ledger) Prove(query *ledger.Query) (proof ledger.Proof, err error)
- func (l *Ledger) Ready() <-chan struct{}
- func (l *Ledger) Set(update *ledger.Update) (newState ledger.State, trieUpdate *ledger.TrieUpdate, err error)
- func (l *Ledger) Trie(rootHash ledger.RootHash) (*trie.MTrie, error)
- func (l *Ledger) TrieUpdateChan() <-chan *WALTrieUpdate
- func (l *Ledger) Tries() ([]*trie.MTrie, error)
- func (l *Ledger) ValueSizes(query *ledger.Query) (valueSizes []int, err error)
- type LedgerStats
- type WALTrieUpdate
Constants ¶
const ( DefaultCacheSize = 1000 DefaultPathFinderVersion = 1 )
Variables ¶
This section is empty.
Functions ¶
This section is empty.
Types ¶
type Compactor ¶ added in v0.27.0
type Compactor struct {
// contains filtered or unexported fields
}
Compactor is a long-running goroutine responsible for: - writing WAL record from trie update, - starting checkpointing async when enough segments are finalized.
Compactor communicates with Ledger through channels to ensure that by the end of any trie update processing, update is written to WAL and new trie is pushed to trie queue.
Compactor stores pointers to tries in ledger state in a fix-sized checkpointing queue (FIFO). Checkpointing queue is decoupled from main ledger state to allow separate optimization and looser coupling, etc. CAUTION: If the forest LRU Cache is used for main state, then ledger state and checkpointing queue may contain different tries. This will be resolved automaticaly after the forest LRU Cache (code outside checkpointing) is replaced by something like a FIFO queue.
func NewCompactor ¶ added in v0.27.0
func NewCompactor( l *Ledger, w realWAL.LedgerWAL, logger zerolog.Logger, checkpointCapacity uint, checkpointDistance uint, checkpointsToKeep uint, triggerCheckpointOnNextSegmentFinish *atomic.Bool, metrics module.WALMetrics, ) (*Compactor, error)
NewCompactor creates new Compactor which writes WAL record and triggers checkpointing asynchronously when enough segments are finalized. The checkpointDistance is a flag that specifies how many segments need to be finalized to trigger checkpointing. However, if a prior checkpointing is already running and not finished, then more segments than specified could be accumulated for the new checkpointing (to reduce memory). All returned errors indicate that Compactor can't be created. Since failure to create Compactor will end up blocking ledger updates, the caller should handle all returned errors as unrecoverable.
func (*Compactor) Done ¶ added in v0.27.0
func (c *Compactor) Done() <-chan struct{}
Done returns channel which would be closed when Compactor goroutine exits.
func (*Compactor) Ready ¶ added in v0.27.0
func (c *Compactor) Ready() <-chan struct{}
Ready returns channel which would be closed when Compactor goroutine starts.
func (*Compactor) Subscribe ¶ added in v0.27.0
func (c *Compactor) Subscribe(observer observable.Observer)
Subscribe subscribes observer to Compactor.
func (*Compactor) Unsubscribe ¶ added in v0.27.0
func (c *Compactor) Unsubscribe(observer observable.Observer)
Unsubscribe unsubscribes observer to Compactor.
type Ledger ¶
type Ledger struct {
// contains filtered or unexported fields
}
Ledger (complete) is a fast memory-efficient fork-aware thread-safe trie-based key/value storage. Ledger holds an array of registers (key-value pairs) and keeps tracks of changes over a limited time. Each register is referenced by an ID (key) and holds a value (byte slice). Ledger provides atomic batched updates and read (with or without proofs) operation given a list of keys. Every update to the Ledger creates a new state which captures the state of the storage. Under the hood, it uses binary Merkle tries to generate inclusion and non-inclusion proofs. Ledger is fork-aware which means any update can be applied at any previous state which forms a tree of tries (forest). The forest is in memory but all changes (e.g. register updates) are captured inside write-ahead-logs for crash recovery reasons. In order to limit the memory usage and maintain the performance storage only keeps a limited number of tries and purge the old ones (FIFO-based); in other words, Ledger is not designed to be used for archival usage but make it possible for other software components to reconstruct very old tries using write-ahead logs.
func NewLedger ¶
func NewLedger( wal realWAL.LedgerWAL, capacity int, metrics module.LedgerMetrics, log zerolog.Logger, pathFinderVer uint8) (*Ledger, error)
NewLedger creates a new in-memory trie-backed ledger storage with persistence.
func (*Ledger) Checkpointer ¶
func (l *Ledger) Checkpointer() (*realWAL.Checkpointer, error)
Checkpointer returns a checkpointer instance
func (*Ledger) CollectStats ¶ added in v0.29.0
func (l *Ledger) CollectStats(payloadCallBack func(payload *ledger.Payload)) (*LedgerStats, error)
func (*Ledger) Done ¶
func (l *Ledger) Done() <-chan struct{}
Done implements interface module.ReadyDoneAware
func (*Ledger) DumpTrieAsJSON ¶ added in v0.13.0
DumpTrieAsJSON export trie at specific state as JSONL (each line is JSON encoding of a payload)
func (*Ledger) FindTrieByStateCommit ¶ added in v0.32.0
FindTrieByStateCommit iterates over the ledger tries and compares the root hash to the state commitment if a match is found it is returned, otherwise a nil value is returned indicating no match was found
func (*Ledger) ForestSize ¶
ForestSize returns the number of tries stored in the forest
func (*Ledger) Get ¶
Get read the values of the given keys at the given state it returns the values in the same order as given registerIDs and errors (if any)
func (*Ledger) GetSingleValue ¶ added in v0.26.2
GetSingleValue reads value of a single given key at the given state.
func (*Ledger) HasState ¶ added in v0.26.16
HasState returns true if the given state exists inside the ledger
func (*Ledger) InitialState ¶ added in v0.10.0
InitialState returns the state of an empty ledger
func (*Ledger) MemSize ¶
MemSize return the amount of memory used by ledger TODO implement an approximate MemSize method
func (*Ledger) MostRecentTouchedState ¶ added in v0.16.0
MostRecentTouchedState returns a state which is most recently touched.
func (*Ledger) Prove ¶
Prove provides proofs for a ledger query and errors (if any).
Proves are generally _not_ provided in the register order of the query. In the current implementation, proofs are sorted in a deterministic order specified by the forest and mtrie implementation.
func (*Ledger) Ready ¶
func (l *Ledger) Ready() <-chan struct{}
Ready implements interface module.ReadyDoneAware it starts the EventLoop's internal processing loop.
func (*Ledger) Set ¶
func (l *Ledger) Set(update *ledger.Update) (newState ledger.State, trieUpdate *ledger.TrieUpdate, err error)
Set updates the ledger given an update. It returns the state after update and errors (if any)
func (*Ledger) TrieUpdateChan ¶ added in v0.27.0
func (l *Ledger) TrieUpdateChan() <-chan *WALTrieUpdate
TrieUpdateChan returns a channel which is used to receive trie updates that needs to be logged in WALs. This channel is closed when ledger component shutdowns down.
type LedgerStats ¶ added in v0.29.0
type WALTrieUpdate ¶ added in v0.27.0
type WALTrieUpdate struct { Update *ledger.TrieUpdate // Update data needs to be encoded and saved in WAL. ResultCh chan<- error // ResultCh channel is used to send WAL update result from Compactor to Ledger. TrieCh <-chan *trie.MTrie // TrieCh channel is used to send new trie from Ledger to Compactor. }
WALTrieUpdate is a message communicated through channel between Ledger and Compactor.