admin

package
v0.33.11 Latest Latest
Warning

This package is not in the latest version of its module.

 Go to latest Published: Feb 29, 2024 License: AGPL-3.0 Imports: 20 Imported by: 6

README

Intro

Admin tool allows us to dynamically change settings of the running node without a restart. It can be used to change log level, and turn on profiler etc.

Usage

List all commands

curl localhost:9002/admin/run_command -H 'Content-Type: application/json' -d '{"commandName": "list-commands"}'

To change log level

Flow, and other zerolog-based libraries:

curl localhost:9002/admin/run_command -H 'Content-Type: application/json' -d '{"commandName": "set-log-level", "data": "debug"}'

libp2p, badger, and other golog-based libraries:

curl localhost:9002/admin/run_command -H 'Content-Type: application/json' -d '{"commandName": "set-golog-level", "data": "debug"}'

To get the latest finalized block

curl localhost:9002/admin/run_command -H 'Content-Type: application/json' -d '{"commandName": "read-blocks", "data": { "block": "final" }}'

To get the latest sealed block

curl localhost:9002/admin/run_command -H 'Content-Type: application/json' -d '{"commandName": "read-blocks", "data": { "block": "sealed" }}'

To get block by height

curl localhost:9002/admin/run_command -H 'Content-Type: application/json' -d '{"commandName": "read-blocks", "data": { "block": 24998900 }}'

To get identity by peer id

curl localhost:9002/admin/run_command -H 'Content-Type: application/json' -d '{"commandName": "get-latest-identity", "data": { "peer_id": "QmNqszdfyEZmMCXcnoUdBDWboFvVLF5reyKPuiqFQT77Vw" }}'

To get transactions for ranges (only available to staked access and execution nodes)

curl localhost:9002/admin/run_command -H 'Content-Type: application/json' -d '{"commandName": "get-transactions", "data": { "start-height": 340, "end-height": 343 }}'

To get blocks for ranges (works for any node type, for block payload, only prints the collection ids)

curl localhost:9002/admin/run_command -H 'Content-Type: application/json' -d '{"commandName": "read-range-blocks", "data": { "start-height": 105172044, "end-height": 105172047 }}'

To get cluster block for ranges (only available to collection nodes, only prints the transaction ids)

curl localhost:9002/admin/run_command -H 'Content-Type: application/json' -d '{"commandName": "read-range-cluster-blocks", "data": { "chain-id": "cluster-576-e8af4702d837acb77868a95f61eb212f90b14c6b7d61c89f48949fd27d1a269b", "start-height": 25077, "end-height": 25080 }}'

To get execution data for a block by execution_data_id (only available execution nodes and access nodes with execution sync enabled)

curl localhost:9002/admin/run_command -H 'Content-Type: application/json' -d '{"commandName": "read-execution-data", "data": { "execution_data_id": "2fff2b05e7226c58e3c14b3549ab44a354754761c5baa721ea0d1ea26d069dc4" }}'
To get a list of all updatable configs
curl localhost:9002/admin/run_command -H 'Content-Type: application/json' -d '{"commandName": "list-configs"}'

To get a config value

curl localhost:9002/admin/run_command -H 'Content-Type: application/json' -d '{"commandName": "get-config", "data": "consensus-required-approvals-for-sealing"}'

To set a config value

Example: require 1 approval for consensus sealing
curl localhost:9002/admin/run_command -H 'Content-Type: application/json' -d '{"commandName": "set-config", "data": {"consensus-required-approvals-for-sealing": 1}}'

TODO remove

Example: set block rate delay to 750ms
curl localhost:9002/admin/run_command -H 'Content-Type: application/json' -d '{"commandName": "set-config", "data": {"hotstuff-block-rate-delay": "750ms"}}'
Example: enable the auto-profiler
curl localhost:9002/admin/run_command -H 'Content-Type: application/json' -d '{"commandName": "set-config", "data": {"profiler-enabled": true}}'
Example: manually trigger the auto-profiler for 1 minute
curl localhost:9002/admin/run_command -H 'Content-Type: application/json' -d '{"commandName": "set-config", "data": {"profiler-trigger": "1m"}}'

Set a stop height

curl localhost:9002/admin/run_command -H 'Content-Type: application/json' -d '{"commandName": "stop-at-height", "data": { "height": 1111, "crash": false }}'

Trigger checkpoint creation on execution

curl localhost:9002/admin/run_command -H 'Content-Type: application/json' -d '{"commandName": "trigger-checkpoint"}'

Add/Remove/Get address to rate limit a payer from adding transactions to collection nodes' mempool

curl localhost:9002/admin/run_command -H 'Content-Type: application/json' -d '{"commandName": "ingest-tx-rate-limit", "data": { "command": "add", "addresses": "a08d349e8037d6e5,e6765c6113547fb7" }}'
curl localhost:9002/admin/run_command -H 'Content-Type: application/json' -d '{"commandName": "ingest-tx-rate-limit", "data": { "command": "remove", "addresses": "a08d349e8037d6e5,e6765c6113547fb7" }}'
curl localhost:9002/admin/run_command -H 'Content-Type: application/json' -d '{"commandName": "ingest-tx-rate-limit", "data": { "command": "get" }}'
curl localhost:9002/admin/run_command -H 'Content-Type: application/json' -d '{"commandName": "ingest-tx-rate-limit", "data": { "command": "get_config" }}'
curl localhost:9002/admin/run_command -H 'Content-Type: application/json' -d '{"commandName": "ingest-tx-rate-limit", "data": { "command": "set_config", "limit": 1, "burst": 1 }}'

Documentation

Index

Constants

View Source 
const CommandRunnerShutdownTimeout = 5 * time.Second

Variables

This section is empty.

Functions

func IsInvalidAdminParameterError added in v0.28.0 

func IsInvalidAdminParameterError(err error) bool

func NewAdminServer 

func NewAdminServer(cr *CommandRunner) *adminServer

Types

type CommandHandler 

type CommandHandler func(ctx context.Context, request *CommandRequest) (interface{}, error)

type CommandRequest 

type CommandRequest struct {
	// Data is the payload of the request, generated by the request initiator.
	// This is populated by the admin command framework and is available to both
	// Validator and Handler functions.
	Data interface{}
	// ValidatorData may be optionally set by the Validator function, and will
	// then be available for use in the Handler function.
	ValidatorData interface{}
}

CommandRequest is the structure of an admin command request.

type CommandRunner 

type CommandRunner struct {
	// contains filtered or unexported fields
}

func (*CommandRunner) Done 

func (r *CommandRunner) Done() <-chan struct{}

func (*CommandRunner) GrpcAddress added in v0.30.0 

func (r *CommandRunner) GrpcAddress() string

func (*CommandRunner) Ready 

func (r *CommandRunner) Ready() <-chan struct{}

func (*CommandRunner) Start 

func (r *CommandRunner) Start(ctx irrecoverable.SignalerContext)

type CommandRunnerBootstrapper 

type CommandRunnerBootstrapper struct {
	// contains filtered or unexported fields
}

func NewCommandRunnerBootstrapper 

func NewCommandRunnerBootstrapper() *CommandRunnerBootstrapper

func (*CommandRunnerBootstrapper) Bootstrap 

func (r *CommandRunnerBootstrapper) Bootstrap(logger zerolog.Logger, bindAddress string, opts ...CommandRunnerOption) *CommandRunner

func (*CommandRunnerBootstrapper) RegisterHandler 

func (r *CommandRunnerBootstrapper) RegisterHandler(command string, handler CommandHandler) bool

func (*CommandRunnerBootstrapper) RegisterValidator 

func (r *CommandRunnerBootstrapper) RegisterValidator(command string, validator CommandValidator) bool

type CommandRunnerOption 

type CommandRunnerOption func(*CommandRunner)

func WithGRPCAddress 

func WithGRPCAddress(address string) CommandRunnerOption

func WithMaxMsgSize added in v0.28.16 

func WithMaxMsgSize(size int) CommandRunnerOption

func WithTLS 

func WithTLS(config *tls.Config) CommandRunnerOption

type CommandValidator 

type CommandValidator func(request *CommandRequest) error

type InvalidAdminReqError added in v0.29.0 

type InvalidAdminReqError struct {
	Err error
}

InvalidAdminReqError indicates that an admin request has failed validation, and the request will not be processed. All Validator functions must return this error if the request was invalid.

func NewInvalidAdminReqErrorf added in v0.29.0 

func NewInvalidAdminReqErrorf(msg string, args ...any) InvalidAdminReqError

func NewInvalidAdminReqFormatError added in v0.29.0 

func NewInvalidAdminReqFormatError(msg string, args ...any) InvalidAdminReqError

NewInvalidAdminReqFormatError returns an InvalidAdminReqError indicating that the request data format is invalid.

func NewInvalidAdminReqParameterError added in v0.29.0 

func NewInvalidAdminReqParameterError(field string, msg string, actualVal any) InvalidAdminReqError

NewInvalidAdminReqParameterError returns an InvalidAdminReqError indicating that a field of the request has an invalid value.

func (InvalidAdminReqError) Error added in v0.29.0 

func (err InvalidAdminReqError) Error() string

func (InvalidAdminReqError) Unwrap added in v0.29.0 

func (err InvalidAdminReqError) Unwrap() error

Source Files

View all Source files

Directories

Path Synopsis
Package admin is a reverse proxy.
 Package admin is a reverse proxy.
common
execution
state_synchronization
storage
uploader

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL
go.dev uses cookies from Google to deliver and enhance the quality of its services and to analyze traffic. Learn more.