cmd

package
v0.23.8 Latest Latest
Warning

This package is not in the latest version of its module.

 Go to latest Published: Jan 31, 2022 License: AGPL-3.0 Imports: 55 Imported by: 13

Documentation

Index

Constants

View Source 
const NotSet = "not set"

Variables

This section is empty.

Functions

func LoadNodeMachineAccountInfoFile added in v0.20.0 

func LoadNodeMachineAccountInfoFile(bootstrapDir string, nodeID flow.Identifier) (*bootstrap.NodeMachineAccountInfo, error)

LoadNodeMachineAccountInfoFile loads machine account info from the default location within the bootstrap directory - Currently being used by Collection and Consensus nodes

func LoadPrivateNodeInfo added in v0.22.8 

func LoadPrivateNodeInfo(dir string, myID flow.Identifier) (*bootstrap.NodeInfoPriv, error)

Loads the private info for this node from disk (eg. private staking/network keys).

func MarkFlagRequired added in v0.22.0 

func MarkFlagRequired(command *cobra.Command, flagName string)

MarkFlagRequired marks a flag added to a cobra command as required. Panics if the flag has not been added to the cobra command (indicates misconfiguration or typo).

Types

type BaseConfig 

type BaseConfig struct {
	AdminAddr      string
	AdminCert      string
	AdminKey       string
	AdminClientCAs string
	BindAddr       string
	NodeRole       string

	BootstrapDir          string
	PeerUpdateInterval    time.Duration
	UnicastMessageTimeout time.Duration
	DNSCacheTTL           time.Duration

	PreferredUnicastProtocols       []string
	NetworkReceivedMessageCacheSize int
	// contains filtered or unexported fields
}

BaseConfig is the general config for the NodeBuilder and the command line params For a node running as a standalone process, the config fields will be populated from the command line params, while for a node running as a library, the config fields are expected to be initialized by the caller.

func DefaultBaseConfig added in v0.21.0 

func DefaultBaseConfig() *BaseConfig

type FlowNodeBuilder 

type FlowNodeBuilder struct {
	*NodeConfig
	// contains filtered or unexported fields
}

FlowNodeBuilder is the default builder struct used for all flow nodes It runs a node process with following structure, in sequential order Base inits (network, storage, state, logger) 

PostInit handlers, if any

Components handlers, if any, wait sequentially Run() <- main loop Components destructors, if any The initialization can be proceeded and succeeded with PreInit and PostInit functions that allow customization of the process in case of nodes such as the unstaked access node where the NodeInfo is not part of the genesis data

func FlowNode 

func FlowNode(role string, opts ...Option) *FlowNodeBuilder

FlowNode creates a new Flow node builder with the given name.

func (*FlowNodeBuilder) AdminCommand added in v0.22.0 

func (fnb *FlowNodeBuilder) AdminCommand(command string, f func(config *NodeConfig) commands.AdminCommand) NodeBuilder

func (*FlowNodeBuilder) BaseFlags added in v0.20.0 

func (fnb *FlowNodeBuilder) BaseFlags()

func (*FlowNodeBuilder) Component 

func (fnb *FlowNodeBuilder) Component(name string, f func(builder NodeBuilder, node *NodeConfig) (module.ReadyDoneAware, error)) NodeBuilder

Component adds a new component to the node that conforms to the ReadyDone interface.

When the node is run, this component will be started with `Ready`. When the node is stopped, we will wait for the component to exit gracefully with `Done`.

func (*FlowNodeBuilder) Done added in v0.21.0 

func (fnb *FlowNodeBuilder) Done() <-chan struct{}

Done returns a channel that closes after all registered components are stopped

func (*FlowNodeBuilder) EnqueueAdminServerInit added in v0.22.0 

func (fnb *FlowNodeBuilder) EnqueueAdminServerInit()

func (*FlowNodeBuilder) EnqueueMetricsServerInit added in v0.20.0 

func (fnb *FlowNodeBuilder) EnqueueMetricsServerInit()

func (*FlowNodeBuilder) EnqueueNetworkInit added in v0.20.0 

func (fnb *FlowNodeBuilder) EnqueueNetworkInit()

func (*FlowNodeBuilder) EnqueueTracer added in v0.20.0 

func (fnb *FlowNodeBuilder) EnqueueTracer()

func (*FlowNodeBuilder) ExtraFlags 

func (fnb *FlowNodeBuilder) ExtraFlags(f func(*pflag.FlagSet)) NodeBuilder

ExtraFlags enables binding additional flags beyond those defined in BaseConfig.

func (*FlowNodeBuilder) InitIDProviders added in v0.21.1 

func (fnb *FlowNodeBuilder) InitIDProviders()

func (*FlowNodeBuilder) Initialize added in v0.20.0 

func (fnb *FlowNodeBuilder) Initialize() error

func (*FlowNodeBuilder) Module 

func (fnb *FlowNodeBuilder) Module(name string, f func(builder NodeBuilder, node *NodeConfig) error) NodeBuilder

Module enables setting up dependencies of the engine with the builder context.

func (*FlowNodeBuilder) MustNot 

func (fnb *FlowNodeBuilder) MustNot(err error) *zerolog.Event

MustNot asserts that the given error must not occur.

If the error is nil, returns a nil log event (which acts as a no-op). If the error is not nil, returns a fatal log event containing the error.

func (*FlowNodeBuilder) ParseAndPrintFlags added in v0.20.0 

func (fnb *FlowNodeBuilder) ParseAndPrintFlags()

func (*FlowNodeBuilder) PostInit 

func (fnb *FlowNodeBuilder) PostInit(f func(builder NodeBuilder, node *NodeConfig)) NodeBuilder

func (*FlowNodeBuilder) PreInit added in v0.20.0 

func (fnb *FlowNodeBuilder) PreInit(f func(builder NodeBuilder, node *NodeConfig)) NodeBuilder

func (*FlowNodeBuilder) PrintBuildVersionDetails added in v0.20.0 

func (fnb *FlowNodeBuilder) PrintBuildVersionDetails()

func (*FlowNodeBuilder) Ready added in v0.21.0 

func (fnb *FlowNodeBuilder) Ready() <-chan struct{}

Ready returns a channel that closes after initiating all common components (logger, database, protocol state etc.) and then starting all modules and components.

func (*FlowNodeBuilder) RegisterBadgerMetrics added in v0.20.0 

func (fnb *FlowNodeBuilder) RegisterBadgerMetrics() error

func (*FlowNodeBuilder) RegisterDefaultAdminCommands added in v0.23.0 

func (fnb *FlowNodeBuilder) RegisterDefaultAdminCommands()

func (*FlowNodeBuilder) Run 

func (fnb *FlowNodeBuilder) Run()

Run calls Ready() to start all the node modules and components. It also sets up a channel to gracefully shut down each component if a SIGINT is received. Until a SIGINT is received, Run will block. Since, Run is a blocking call it should only be used when running a node as it's own independent process.

func (*FlowNodeBuilder) ValidateFlags added in v0.20.6 

func (fnb *FlowNodeBuilder) ValidateFlags(f func() error) NodeBuilder

type Metrics 

type Metrics struct {
	Network        module.NetworkMetrics
	Engine         module.EngineMetrics
	Compliance     module.ComplianceMetrics
	Cache          module.CacheMetrics
	Mempool        module.MempoolMetrics
	CleanCollector module.CleanerMetrics
}

type NodeBuilder added in v0.20.0 

type NodeBuilder interface {
	module.ReadyDoneAware

	// BaseFlags reads the command line arguments common to all nodes
	BaseFlags()

	// ExtraFlags reads the node specific command line arguments and adds it to the FlagSet
	ExtraFlags(f func(*pflag.FlagSet)) NodeBuilder

	// ParseAndPrintFlags parses all the command line arguments
	ParseAndPrintFlags()

	// Initialize performs all the initialization needed at the very start of a node
	Initialize() error

	// PrintBuildVersionDetails prints the node software build version
	PrintBuildVersionDetails()

	// InitIDProviders initializes the ID providers needed by various components
	InitIDProviders()

	// EnqueueNetworkInit enqueues the default network component with the given context
	EnqueueNetworkInit()

	// EnqueueMetricsServerInit enqueues the metrics component
	EnqueueMetricsServerInit()

	// Enqueues the Tracer component
	EnqueueTracer()

	// Module enables setting up dependencies of the engine with the builder context
	Module(name string, f func(builder NodeBuilder, node *NodeConfig) error) NodeBuilder

	// Component adds a new component to the node that conforms to the ReadyDone
	// interface.
	//
	// When the node is run, this component will be started with `Ready`. When the
	// node is stopped, we will wait for the component to exit gracefully with
	// `Done`.
	Component(name string, f func(builder NodeBuilder, node *NodeConfig) (module.ReadyDoneAware, error)) NodeBuilder

	// AdminCommand registers a new admin command with the admin server
	AdminCommand(command string, f func(config *NodeConfig) commands.AdminCommand) NodeBuilder

	// MustNot asserts that the given error must not occur.
	// If the error is nil, returns a nil log event (which acts as a no-op).
	// If the error is not nil, returns a fatal log event containing the error.
	MustNot(err error) *zerolog.Event

	// Run initiates all common components (logger, database, protocol state etc.)
	// then starts each component. It also sets up a channel to gracefully shut
	// down each component if a SIGINT is received.
	Run()

	// PreInit registers a new PreInit function.
	// PreInit functions run before the protocol state is initialized or any other modules or components are initialized
	PreInit(f func(builder NodeBuilder, node *NodeConfig)) NodeBuilder

	// PostInit registers a new PreInit function.
	// PostInit functions run after the protocol state has been initialized but before any other modules or components
	// are initialized
	PostInit(f func(builder NodeBuilder, node *NodeConfig)) NodeBuilder

	// RegisterBadgerMetrics registers all badger related metrics
	RegisterBadgerMetrics() error

	// ValidateFlags is an extra method called after parsing flags, intended for extra check of flag validity
	// for example where certain combinations aren't allowed
	ValidateFlags(func() error) NodeBuilder
}

NodeBuilder declares the initialization methods needed to bootstrap up a Flow node

type NodeConfig added in v0.20.0 

type NodeConfig struct {
	Cancel context.CancelFunc // cancel function for the context that is passed to the networking layer
	BaseConfig
	Logger            zerolog.Logger
	NodeID            flow.Identifier
	Me                *local.Local
	Tracer            module.Tracer
	MetricsRegisterer prometheus.Registerer
	Metrics           Metrics
	DB                *badger.DB
	SecretsDB         *badger.DB
	Storage           Storage
	ProtocolEvents    *events.Distributor
	State             protocol.State
	Middleware        network.Middleware
	Network           network.Network
	MsgValidators     []network.MessageValidator
	FvmOptions        []fvm.Option
	StakingKey        crypto.PrivateKey
	NetworkKey        crypto.PrivateKey

	// ID providers
	IdentityProvider             id.IdentityProvider
	IDTranslator                 p2p.IDTranslator
	SyncEngineIdentifierProvider id.IdentifierProvider

	// root state information
	RootBlock                     *flow.Block
	RootQC                        *flow.QuorumCertificate
	RootResult                    *flow.ExecutionResult
	RootSeal                      *flow.Seal
	RootChainID                   flow.ChainID
	SporkID                       flow.Identifier
	SkipNwAddressBasedValidations bool
}

NodeConfig contains all the derived parameters such the NodeID, private keys etc. and initialized instances of structs such as DB, Network etc. The NodeConfig is composed of the BaseConfig and is updated in the NodeBuilder functions as a node is bootstrapped.

type Option added in v0.21.0 

type Option func(*BaseConfig)

func WithBindAddress added in v0.21.1 

func WithBindAddress(bindAddress string) Option

func WithBootstrapDir added in v0.21.0 

func WithBootstrapDir(bootstrapDir string) Option

func WithDB added in v0.21.1 

func WithDB(db *badger.DB) Option

WithDB takes precedence over WithDataDir and datadir will be set to empty if DB is set using this option

func WithDataDir added in v0.21.0 

func WithDataDir(dataDir string) Option

func WithLogLevel added in v0.21.1 

func WithLogLevel(level string) Option

func WithMetricsEnabled added in v0.21.0 

func WithMetricsEnabled(enabled bool) Option

func WithSecretsDBEnabled added in v0.22.4 

func WithSecretsDBEnabled(enabled bool) Option

type Storage 

type Storage = storage.All

Source Files

View all Source files

Directories

Path Synopsis
node_builder
cmd
contains CLI logic that can exit the program and read/write files.
 contains CLI logic that can exit the program and read/write files.
gcs
run
contains reusable logic that does not know about a CLI.
 contains reusable logic that does not know about a CLI.
transit
transit/cmd
utils
Package build contains information about the build that injected at build-time.
 Package build contains information about the build that injected at build-time.
testclient module
cmd
cmd/checkpoint-list-tries
cmd/common
cmd/epochs
cmd/epochs/cmd
cmd/epochs/utils
cmd/exec-data-json-export
cmd/execution-state-extract
cmd/export-json-execution-state
cmd/read-badger
cmd/read-badger/cmd
cmd/read-execution-state
cmd/read-execution-state/list-accounts
cmd/read-execution-state/list-tries
cmd/read-execution-state/list-wals
cmd/read-protocol-state
cmd/read-protocol-state/cmd
cmd/remove-execution-fork
cmd/remove-execution-fork/cmd
cmd/truncate-database
ledger/migrations
ledger/reporters

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL
go.dev uses cookies from Google to deliver and enhance the quality of its services and to analyze traffic. Learn more.