conn

package
v0.1.2 Latest Latest
Warning

This package is not in the latest version of its module.

 Go to latest Published: May 16, 2023 License: Apache-2.0, Apache-2.0 Imports: 32 Imported by: 0

Documentation

Index

Constants

View Source 
const (
	PacketPingName = "tendermint/p2p/PacketPing"
	PacketPongName = "tendermint/p2p/PacketPong"
	PacketMsgName  = "tendermint/p2p/PacketMsg"
)

Variables

View Source 
var (
	PacketPingTypePrefix = []byte{0x15, 0xC3, 0xD2, 0x89}
	PacketPongTypePrefix = []byte{0x8A, 0x79, 0x7F, 0xE2}
	PacketMsgTypePrefix  = []byte{0xB0, 0x5B, 0x4F, 0x2C}
)
View Source 
var (
	ErrSmallOrderRemotePubKey = errors.New("detected low order point from remote peer")
)

Functions

func NetPipe 

func NetPipe() (net.Conn, net.Conn)

func RegisterPacket 

func RegisterPacket(cdc *amino.Codec)

Types

type Channel 

type Channel struct {
	Logger log.Logger
	// contains filtered or unexported fields
}

TODO: lowercase. NOTE: not goroutine-safe.

func (*Channel) SetLogger 

func (ch *Channel) SetLogger(l log.Logger)

type ChannelDescriptor 

type ChannelDescriptor struct {
	ID                  byte
	Priority            int
	SendQueueCapacity   int
	RecvBufferCapacity  int
	RecvMessageCapacity int
}

func (ChannelDescriptor) FillDefaults 

func (chDesc ChannelDescriptor) FillDefaults() (filled ChannelDescriptor)

type ChannelStatus 

type ChannelStatus struct {
	ID                byte
	SendQueueCapacity int
	SendQueueSize     int
	Priority          int
	RecentlySent      int64
}

type ConnectionStatus 

type ConnectionStatus struct {
	Duration    time.Duration
	SendMonitor flow.Status
	RecvMonitor flow.Status
	Channels    []ChannelStatus
}

type MConnConfig 

type MConnConfig struct {
	SendRate int64 `mapstructure:"send_rate"`
	RecvRate int64 `mapstructure:"recv_rate"`

	// Maximum payload size
	MaxPacketMsgPayloadSize int `mapstructure:"max_packet_msg_payload_size"`

	// Interval to flush writes (throttled)
	FlushThrottle time.Duration `mapstructure:"flush_throttle"`

	// Interval to send pings
	PingInterval time.Duration `mapstructure:"ping_interval"`

	// Maximum wait time for pongs
	PongTimeout time.Duration `mapstructure:"pong_timeout"`
}

MConnConfig is a MConnection configuration.

func DefaultMConnConfig 

func DefaultMConnConfig() MConnConfig

DefaultMConnConfig returns the default config.

type MConnection 

type MConnection struct {
	service.BaseService
	// contains filtered or unexported fields
}

Each peer has one `MConnection` (multiplex connection) instance.

__multiplex__ *noun* a system or signal involving simultaneous transmission of several messages along a single channel of communication.

Each `MConnection` handles message transmission on multiple abstract communication `Channel`s. Each channel has a globally unique byte id. The byte id and the relative priorities of each `Channel` are configured upon initialization of the connection.

There are two methods for sending messages: 

func (m MConnection) Send(chID byte, msgBytes []byte) bool {}
func (m MConnection) TrySend(chID byte, msgBytes []byte}) bool {}

`Send(chID, msgBytes)` is a blocking call that waits until `msg` is successfully queued for the channel with the given id byte `chID`, or until the request times out. The message `msg` is serialized using Go-Amino.

`TrySend(chID, msgBytes)` is a nonblocking call that returns false if the channel's queue is full.

Inbound message bytes are handled with an onReceive callback function.

func NewMConnection 

func NewMConnection(
	conn net.Conn,
	chDescs []*ChannelDescriptor,
	onReceive receiveCbFunc,
	onError errorCbFunc,
) *MConnection

NewMConnection wraps net.Conn and creates multiplex connection

func NewMConnectionWithConfig 

func NewMConnectionWithConfig(
	conn net.Conn,
	chDescs []*ChannelDescriptor,
	onReceive receiveCbFunc,
	onError errorCbFunc,
	config MConnConfig,
) *MConnection

NewMConnectionWithConfig wraps net.Conn and creates multiplex connection with a config

func (*MConnection) CanSend 

func (c *MConnection) CanSend(chID byte) bool

CanSend returns true if you can send more data onto the chID, false otherwise. Use only as a heuristic.

func (*MConnection) FlushStop 

func (c *MConnection) FlushStop()

FlushStop replicates the logic of OnStop. It additionally ensures that all successful .Send() calls will get flushed before closing the connection.

func (*MConnection) OnStart 

func (c *MConnection) OnStart() error

OnStart implements BaseService

func (*MConnection) OnStop 

func (c *MConnection) OnStop()

OnStop implements BaseService

func (*MConnection) Send 

func (c *MConnection) Send(chID byte, msgBytes []byte) bool

Queues a message to be sent to channel.

func (*MConnection) SetLogger 

func (c *MConnection) SetLogger(l log.Logger)

func (*MConnection) Status 

func (c *MConnection) Status() ConnectionStatus

func (*MConnection) String 

func (c *MConnection) String() string

func (*MConnection) TrySend 

func (c *MConnection) TrySend(chID byte, msgBytes []byte) bool

Queues a message to be sent to channel. Nonblocking, returns true if successful.

type Packet 

type Packet interface {
	AssertIsPacket()
}

type PacketMsg 

type PacketMsg struct {
	ChannelID byte
	EOF       byte // 1 means message ends here.
	Bytes     []byte
}

func (PacketMsg) AminoSize 

func (mp PacketMsg) AminoSize(_ *amino.Codec) int

func (PacketMsg) AssertIsPacket 

func (PacketMsg) AssertIsPacket()

func (PacketMsg) MarshalAminoTo 

func (mp PacketMsg) MarshalAminoTo(_ *amino.Codec, buf *bytes.Buffer) error

func (PacketMsg) MarshalToAmino 

func (mp PacketMsg) MarshalToAmino(cdc *amino.Codec) ([]byte, error)

func (*PacketMsg) Reset 

func (mp *PacketMsg) Reset()

func (PacketMsg) String 

func (mp PacketMsg) String() string

func (*PacketMsg) UnmarshalFromAmino 

func (mp *PacketMsg) UnmarshalFromAmino(_ *amino.Codec, data []byte) error

type PacketPing 

type PacketPing struct {
}

func (PacketPing) AssertIsPacket 

func (PacketPing) AssertIsPacket()

func (PacketPing) MarshalToAmino 

func (PacketPing) MarshalToAmino(_ *amino.Codec) ([]byte, error)

func (*PacketPing) UnmarshalFromAmino 

func (p *PacketPing) UnmarshalFromAmino(_ *amino.Codec, _ []byte) error

type PacketPong 

type PacketPong struct {
}

func (PacketPong) AssertIsPacket 

func (PacketPong) AssertIsPacket()

func (PacketPong) MarshalToAmino 

func (PacketPong) MarshalToAmino(_ *amino.Codec) ([]byte, error)

func (*PacketPong) UnmarshalFromAmino 

func (p *PacketPong) UnmarshalFromAmino(_ *amino.Codec, _ []byte) error

type SecretConnection 

type SecretConnection struct {
	// contains filtered or unexported fields
}

SecretConnection implements net.Conn. It is an implementation of the STS protocol. See https://github.com/tendermint/tendermint/blob/0.1/docs/sts-final.pdf for details on the protocol.

Consumers of the SecretConnection are responsible for authenticating the remote peer's pubkey against known information, like a nodeID. Otherwise they are vulnerable to MITM. (TODO(ismail): see also https://github.com/tendermint/tendermint/issues/3010)

func MakeSecretConnection 

func MakeSecretConnection(conn io.ReadWriteCloser, locPrivKey crypto.PrivKey) (*SecretConnection, error)

MakeSecretConnection performs handshake and returns a new authenticated SecretConnection. Returns nil if there is an error in handshake. Caller should call conn.Close() See docs/sts-final.pdf for more information.

func (*SecretConnection) Close 

func (sc *SecretConnection) Close() error

Implements net.Conn nolint

func (*SecretConnection) LocalAddr 

func (sc *SecretConnection) LocalAddr() net.Addr

func (*SecretConnection) Read 

func (sc *SecretConnection) Read(data []byte) (n int, err error)

CONTRACT: data smaller than dataMaxSize is read atomically.

func (*SecretConnection) RemoteAddr 

func (sc *SecretConnection) RemoteAddr() net.Addr

func (*SecretConnection) RemotePubKey 

func (sc *SecretConnection) RemotePubKey() crypto.PubKey

RemotePubKey returns authenticated remote pubkey

func (*SecretConnection) SetDeadline 

func (sc *SecretConnection) SetDeadline(t time.Time) error

func (*SecretConnection) SetReadDeadline 

func (sc *SecretConnection) SetReadDeadline(t time.Time) error

func (*SecretConnection) SetWriteDeadline 

func (sc *SecretConnection) SetWriteDeadline(t time.Time) error

func (*SecretConnection) Write 

func (sc *SecretConnection) Write(data []byte) (n int, err error)

Writes encrypted frames of `totalFrameSize + aeadSizeOverhead`. CONTRACT: data smaller than dataMaxSize is written atomically.

Source Files

View all Source files

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL
go.dev uses cookies from Google to deliver and enhance the quality of its services and to analyze traffic. Learn more.