irpcasyncnotify

package
v1.1.0 Latest Latest
Warning

This package is not in the latest version of its module.

 Go to latest Published: Dec 13, 2024 License: MIT Imports: 11 Imported by: 0

Documentation

Index

Constants

This section is empty.

Variables

View Source 
var (
	// Syntax UUID
	IrpcAsyncNotifySyntaxUUID = &uuid.UUID{TimeLow: 0xb6edbfa, TimeMid: 0x4a24, TimeHiAndVersion: 0x4fc6, ClockSeqHiAndReserved: 0x8a, ClockSeqLow: 0x23, Node: [6]uint8{0x94, 0x2b, 0x1e, 0xca, 0x65, 0xd1}}
	// Syntax ID
	IrpcAsyncNotifySyntaxV1_0 = &dcerpc.SyntaxID{IfUUID: IrpcAsyncNotifySyntaxUUID, IfVersionMajor: 1, IfVersionMinor: 0}
)
View Source 
var (
	// import guard
	GoPackage = "pan"
)

Functions

func IrpcAsyncNotifyServerHandle 

func IrpcAsyncNotifyServerHandle(ctx context.Context, o IrpcAsyncNotifyServer, opNum int, r ndr.Reader) (dcerpc.Operation, error)

func NewIrpcAsyncNotifyServerHandle 

func NewIrpcAsyncNotifyServerHandle(o IrpcAsyncNotifyServer) dcerpc.ServerHandle

func RegisterIrpcAsyncNotifyServer 

func RegisterIrpcAsyncNotifyServer(conn dcerpc.Conn, o IrpcAsyncNotifyServer, opts ...dcerpc.Option)

Types

type CloseChannelRequest 

type CloseChannelRequest struct {
	// pChannel: MUST be a pointer to a notification channel that MUST NOT be closed or
	// zero and that MUST have been returned by the server in the ppChannelCtxt output parameter
	// of a prior call to IRPCAsyncNotify_GetNewChannel. Upon receipt, the server MUST set
	// the pChannel value to NULL.
	Channel *NotifyObject `idl:"name:pChannel" json:"channel"`
	// pInNotificationType: MUST be a pointer to a PrintAsyncNotificationType value. If
	// the client needs to close the notification channels without sending a final response,
	// then this value SHOULD point to NOTIFICATION_RELEASE. In all other cases, this value
	// MUST point to the notification type identifier of the notification type for which
	// the client has registered.
	InNotificationType *NotificationType `idl:"name:pInNotificationType" json:"in_notification_type"`
	// InSize: The server SHOULD impose an upper limit on this value that is smaller than
	// the maximum unsigned 32-bit integer. That limit SHOULD be 0x00A00000. If the client
	// exceeds the server-imposed limit, the server MUST return an error result.
	//
	// If pInNotificationType is NOTIFICATION_RELEASE, then InSize SHOULD be 0x00000000.
	InSize uint32 `idl:"name:InSize" json:"in_size"`
	// pReason: MUST be a pointer to a sequence of bytes conveying final client-to-server
	// response data. The number of bytes MUST be provided in the InSize parameter. If InSize
	// is not 0x00000000, then pReason MUST NOT be NULL.
	//
	// If pInNotificationType is NOTIFICATION_RELEASE, then the client SHOULD provide zero
	// bytes of response data and the server MUST ignore any response data pointed to by
	// pReason. If pInNotificationType is not NOTIFICATION_RELEASE, then the response format
	// MUST conform to the requirements of the notification channel's notification type
	// and those notification type requirements determine whether or not a zero-byte response
	// is acceptable.
	Reason []byte `idl:"name:pReason;size_is:(InSize);pointer:unique" json:"reason"`
}

CloseChannelRequest structure represents the IRPCAsyncNotify_CloseChannel operation request

func (*CloseChannelRequest) MarshalNDR 

func (o *CloseChannelRequest) MarshalNDR(ctx context.Context, w ndr.Writer) error

func (*CloseChannelRequest) UnmarshalNDR 

func (o *CloseChannelRequest) UnmarshalNDR(ctx context.Context, r ndr.Reader) error

type CloseChannelResponse 

type CloseChannelResponse struct {
	// pChannel: MUST be a pointer to a notification channel that MUST NOT be closed or
	// zero and that MUST have been returned by the server in the ppChannelCtxt output parameter
	// of a prior call to IRPCAsyncNotify_GetNewChannel. Upon receipt, the server MUST set
	// the pChannel value to NULL.
	Channel *NotifyObject `idl:"name:pChannel" json:"channel"`
	// Return: The IRPCAsyncNotify_CloseChannel return value.
	Return int32 `idl:"name:Return" json:"return"`
}

CloseChannelResponse structure represents the IRPCAsyncNotify_CloseChannel operation response

func (*CloseChannelResponse) MarshalNDR 

func (o *CloseChannelResponse) MarshalNDR(ctx context.Context, w ndr.Writer) error

func (*CloseChannelResponse) UnmarshalNDR 

func (o *CloseChannelResponse) UnmarshalNDR(ctx context.Context, r ndr.Reader) error

type ConversationStyle 

type ConversationStyle uint32

ConversationStyle type represents PrintAsyncNotifyConversationStyle RPC enumeration.

The PrintAsyncNotifyConversationStyle enumeration MUST specify the communication mode expected between the sender and a registered client. 

var (
	// kBiDirectional:  Bidirectional communication mode is specified. The sender expects
	// the client to send responses to notifications.
	ConversationStyleBidirectional ConversationStyle = 0
	// kUniDirectional:  Unidirectional communication mode is specified. The sender does
	// not expect the client to respond to notifications.
	ConversationStyleUnidirectional ConversationStyle = 1
)

func (ConversationStyle) String 

func (o ConversationStyle) String() string

type GetNewChannelRequest 

type GetNewChannelRequest struct {
	// pRemoteObj: MUST be the remote object context handle. This handle is obtained from
	// IRPCRemoteObject_Create (section 3.1.2.4.1). This remote object MUST have been registered
	// for bidirectional communication mode by a prior successful call to IRPCAsyncNotify_RegisterClient
	// (section 3.1.1.4.1).
	RemoteObject *irpcremoteobject.RemoteObject `idl:"name:pRemoteObj" json:"remote_object"`
}

GetNewChannelRequest structure represents the IRPCAsyncNotify_GetNewChannel operation request

func (*GetNewChannelRequest) MarshalNDR 

func (o *GetNewChannelRequest) MarshalNDR(ctx context.Context, w ndr.Writer) error

func (*GetNewChannelRequest) UnmarshalNDR 

func (o *GetNewChannelRequest) UnmarshalNDR(ctx context.Context, r ndr.Reader) error

type GetNewChannelResponse 

type GetNewChannelResponse struct {
	// pNoOfChannels: MUST specify the number of notification channels returned. The array
	// of notification channels is specified by the ppChannelCtxt parameter.
	NumberOfChannels uint32 `idl:"name:pNoOfChannels" json:"number_of_channels"`
	// ppChannelCtxt: MUST specify a pointer to the array of returned notification channels.
	// This data is represented by a Bidirectional Notification Channel structure in the
	// Abstract Data Model (section 3.1.1.1).
	ChannelContext []*NotifyObject `idl:"name:ppChannelCtxt;size_is:(, pNoOfChannels)" json:"channel_context"`
	// Return: The IRPCAsyncNotify_GetNewChannel return value.
	Return int32 `idl:"name:Return" json:"return"`
}

GetNewChannelResponse structure represents the IRPCAsyncNotify_GetNewChannel operation response

func (*GetNewChannelResponse) MarshalNDR 

func (o *GetNewChannelResponse) MarshalNDR(ctx context.Context, w ndr.Writer) error

func (*GetNewChannelResponse) UnmarshalNDR 

func (o *GetNewChannelResponse) UnmarshalNDR(ctx context.Context, r ndr.Reader) error

type GetNotificationRequest 

type GetNotificationRequest struct {
	// pRemoteObj: MUST be the remote object context handle. This remote object MUST have
	// been registered for unidirectional communication mode by a prior successful call
	// to IRPCAsyncNotify_RegisterClient (section 3.1.1.4.1).
	RemoteObject *irpcremoteobject.RemoteObject `idl:"name:pRemoteObj" json:"remote_object"`
}

GetNotificationRequest structure represents the IRPCAsyncNotify_GetNotification operation request

func (*GetNotificationRequest) MarshalNDR 

func (o *GetNotificationRequest) MarshalNDR(ctx context.Context, w ndr.Writer) error

func (*GetNotificationRequest) UnmarshalNDR 

func (o *GetNotificationRequest) UnmarshalNDR(ctx context.Context, r ndr.Reader) error

type GetNotificationResponse 

type GetNotificationResponse struct {
	// ppOutNotificationType: MUST return a pointer to the notification type identifier
	// of the server-to-client notification. If the registered remote object has been deleted,
	// the value MUST be NOTIFICATION_RELEASE (section 2.2.1). In all other cases the value
	// MUST be the same as the notification type identifier of the notification type for
	// which the print client has registered.
	OutNotificationType *NotificationType `idl:"name:ppOutNotificationType" json:"out_notification_type"`
	// pOutSize: MUST be the length of server-to-client notification data, in number of
	// bytes. The client MAY impose an upper limit on this value that is smaller than the
	// maximum unsigned 32-bit integer.
	OutSize uint32 `idl:"name:pOutSize" json:"out_size"`
	// ppOutNotificationData: MUST be a pointer to server-to-client notification data in
	// a format that MUST conform to the channel's notification type.
	OutNotificationData []byte `idl:"name:ppOutNotificationData;size_is:(, pOutSize)" json:"out_notification_data"`
	// Return: The IRPCAsyncNotify_GetNotification return value.
	Return int32 `idl:"name:Return" json:"return"`
}

GetNotificationResponse structure represents the IRPCAsyncNotify_GetNotification operation response

func (*GetNotificationResponse) MarshalNDR 

func (o *GetNotificationResponse) MarshalNDR(ctx context.Context, w ndr.Writer) error

func (*GetNotificationResponse) UnmarshalNDR 

func (o *GetNotificationResponse) UnmarshalNDR(ctx context.Context, r ndr.Reader) error

type GetNotificationSendResponseRequest 

type GetNotificationSendResponseRequest struct {
	// pChannel: A pointer to a notification channel that MUST NOT be closed or zero, and
	// which MUST have been returned by the server in the ppChannelCtxt output parameter
	// of a prior call to IRPCAsyncNotify_GetNewChannel. If the server closes the notification
	// channel, it MUST set the pChannel value to NULL upon return from this method. If
	// the notification channel was acquired by a different client, the server MUST set
	// the pChannel value to NULL upon return from this method.
	Channel *NotifyObject `idl:"name:pChannel" json:"channel"`
	// pInNotificationType: A NULL value or a pointer to a PrintAsyncNotificationType structure
	// that specifies the notification type identifier of the notification type in which
	// the registered client is interested.
	InNotificationType *NotificationType `idl:"name:pInNotificationType;pointer:unique" json:"in_notification_type"`
	// InSize: The size, in bytes, of the input data that the pInNotificationData parameter
	// points to. The server SHOULD impose an upper limit of 0x00A00000 on this value. If
	// the client exceeds the server-imposed limit, the server MUST return an error result.
	InSize uint32 `idl:"name:InSize" json:"in_size"`
	// pInNotificationData: A pointer to input data holding the client's response to the
	// previous notification that was received on the same bidirectional notification channel.
	//
	// On the first call to this method for a given channel, the client SHOULD provide zero
	// bytes of response data and the server MUST ignore any response data sent. On subsequent
	// calls to this method, the response format MUST conform to the requirements of the
	// notification channel's notification type, and those notification type requirements
	// determine whether or a not a zero-byte response is acceptable.
	InNotificationData []byte `idl:"name:pInNotificationData;size_is:(InSize);pointer:unique" json:"in_notification_data"`
}

GetNotificationSendResponseRequest structure represents the IRPCAsyncNotify_GetNotificationSendResponse operation request

func (*GetNotificationSendResponseRequest) MarshalNDR 

func (o *GetNotificationSendResponseRequest) MarshalNDR(ctx context.Context, w ndr.Writer) error

func (*GetNotificationSendResponseRequest) UnmarshalNDR 

func (o *GetNotificationSendResponseRequest) UnmarshalNDR(ctx context.Context, r ndr.Reader) error

type GetNotificationSendResponseResponse 

type GetNotificationSendResponseResponse struct {
	// pChannel: A pointer to a notification channel that MUST NOT be closed or zero, and
	// which MUST have been returned by the server in the ppChannelCtxt output parameter
	// of a prior call to IRPCAsyncNotify_GetNewChannel. If the server closes the notification
	// channel, it MUST set the pChannel value to NULL upon return from this method. If
	// the notification channel was acquired by a different client, the server MUST set
	// the pChannel value to NULL upon return from this method.
	Channel *NotifyObject `idl:"name:pChannel" json:"channel"`
	// ppOutNotificationType: A pointer to the returned pointer to the notification type
	// identifier of the server-to-client notification. If the notification channel was
	// acquired by a different client, the value MUST be NOTIFICATION_RELEASE (section 2.2.1).
	// If the server needs to close the notification channel without sending a final response,
	// the value SHOULD be NOTIFICATION_RELEASE. In all other cases, the value MUST be the
	// same as the notification type identifier of the notification type for which the client
	// has registered.
	OutNotificationType *NotificationType `idl:"name:ppOutNotificationType" json:"out_notification_type"`
	// pOutSize: A pointer to the returned length of server-to-client notification data,
	// in number of bytes. The client MAY impose an upper limit on this value that is smaller
	// than the maximum unsigned 32-bit integer. If the notification channel was acquired
	// by a different client, the server SHOULD set the value of pOutSize to 0x00000000.
	// If the value of ppOutNotificationType points to NOTIFICATION_RELEASE, the server
	// SHOULD set the value of pOutSize to 0x00000000.
	OutSize uint32 `idl:"name:pOutSize" json:"out_size"`
	// ppOutNotificationData: A pointer to the returned pointer to server-to-client notification
	// data in a format that MUST conform to the notification channel's notification type.
	// If the notification channel was acquired by a different client, the server SHOULD
	// set the value of ppOutNotificationData to NULL. If the value of ppOutNotificationType
	// points to NOTIFICATION_RELEASE, the client MUST ignore the content of ppOutNotificationData.
	OutNotificationData []byte `idl:"name:ppOutNotificationData;size_is:(, pOutSize)" json:"out_notification_data"`
	// Return: The IRPCAsyncNotify_GetNotificationSendResponse return value.
	Return int32 `idl:"name:Return" json:"return"`
}

GetNotificationSendResponseResponse structure represents the IRPCAsyncNotify_GetNotificationSendResponse operation response

func (*GetNotificationSendResponseResponse) MarshalNDR 

func (o *GetNotificationSendResponseResponse) MarshalNDR(ctx context.Context, w ndr.Writer) error

func (*GetNotificationSendResponseResponse) UnmarshalNDR 

func (o *GetNotificationSendResponseResponse) UnmarshalNDR(ctx context.Context, r ndr.Reader) error

type IrpcAsyncNotifyClient 

type IrpcAsyncNotifyClient interface {

	// The IRPCAsyncNotify_RegisterClient method is called by clients to register to receive
	// notifications and to associate the parameters describing the set of notifications
	// they are registering to receive with a remote object.
	//
	// Return Values: This method MUST return zero to indicate success, or an HRESULT error
	// value ([MS-ERREF] section 2.1.1) to indicate failure. Protocol-specific error values
	// are defined in the following table. The client SHOULD treat all error return values
	// the same, except where noted.
	//
	//	+--------------+----------------------------------------------------------------------------------+
	//	|    RETURN    |                                                                                  |
	//	|    VALUE     |                                   DESCRIPTION                                    |
	//	|              |                                                                                  |
	//	+--------------+----------------------------------------------------------------------------------+
	//	+--------------+----------------------------------------------------------------------------------+
	//	| 0x80070005   | The client does not have authorization to register for notifications with the    |
	//	|              | set of parameters specified in this call. If this error value is returned, the   |
	//	|              | client SHOULD NOT retry this call; the client SHOULD consider the error to be    |
	//	|              | fatal and report it to the higher level caller.                                  |
	//	+--------------+----------------------------------------------------------------------------------+
	//	| 0x8007000E   | The server does not have enough memory for the new registration.                 |
	//	+--------------+----------------------------------------------------------------------------------+
	//	| 0x80070015   | The server has reached its maximum registration limit.                           |
	//	+--------------+----------------------------------------------------------------------------------+
	//	| 0x8007007B   | The pName parameter does not conform to the format specified above. If this      |
	//	|              | error value is returned, the client SHOULD NOT retry this call; the client       |
	//	|              | SHOULD consider the error to be fatal and report it to the higher level caller.  |
	//	+--------------+----------------------------------------------------------------------------------+
	//
	// Exceptions Thrown: No exceptions are thrown beyond those thrown by the underlying
	// RPC protocol [MS-RPCE].
	//
	// Unless specified otherwise, if a failure is indicated by an error return or an exception,
	// the client SHOULD retry this method call by performing the following steps:
	//
	// *
	//
	// Call IRPCRemoteObject_Create to generate a new PRPCREMOTEOBJECT (section 2.2.4) (
	// a47aca7c-fcc3-4151-8fb6-1de5225ecfa5 ).
	//
	// *
	//
	// Call IRPCAsyncNotify_RegisterClient with the new PRPCREMOTEOBJECT.
	//
	// Retries SHOULD be separated by time intervals decaying from 1 second to 1 minute
	// to reduce a potential burden on the server.
	//
	// The IRPCAsyncNotify_RegisterClient method MUST be called by clients to register for
	// receiving notifications. Servers MUST associate the given remote object with the
	// registration parameters specified.
	//
	// A client MUST NOT call IRPCAsyncNotify_RegisterClient if a prior call to IRPCAsyncNotify_RegisterClient
	// succeeded using the same PRPCREMOTEOBJECT value, unless a later call to IRPCAsyncNotify_UnregisterClient
	// also succeeded.
	//
	// If registering for unidirectional communication mode, a client SHOULD call IRPCAsyncNotify_GetNotification
	// after a successful call to IRPCAsyncNotify_RegisterClient using the same PRPCREMOTEOBJECT
	// value.
	//
	// If registering for bidirectional communication mode, a client SHOULD call IRPCAsyncNotify_GetNewChannel
	// after a successful call to IRPCAsyncNotify_RegisterClient using the same PRPCREMOTEOBJECT
	// value.
	//
	// Servers MUST support the concurrent registration of multiple remote objects with
	// different registration parameters, including notification type, filter, and communication
	// mode.
	//
	// Servers SHOULD consider the security and privacy context prior to letting clients
	// monitor and receive notifications for all user identities. Relevant access rights
	// are defined in the following table.
	//
	//	+-------------------------------+----------------------------------------------------------------------------------+
	//	|                               |                                                                                  |
	//	|          NAME/VALUE           |                                   DESCRIPTION                                    |
	//	|                               |                                                                                  |
	//	+-------------------------------+----------------------------------------------------------------------------------+
	//	+-------------------------------+----------------------------------------------------------------------------------+
	//	| SERVER_ALL_ACCESS 0x000F0003  | Combines the WO (Write Owner), WD (Write DACL), RC (Read Control), and DE        |
	//	|                               | (Delete) bits of the ACCESS_MASK data type ([MS-DTYP] section 2.4.3) with        |
	//	|                               | the following protocol-specific bits: 0x00000001 (bit 31): Access rights to      |
	//	|                               | administer print servers. 0x00000002 (bit 30): Access rights to enumerate print  |
	//	|                               | servers. These printing-specific access rights allow a client to administer the  |
	//	|                               | server and to enumerate server components such as print queues.                  |
	//	+-------------------------------+----------------------------------------------------------------------------------+
	//	| PRINTER_ALL_ACCESS 0x000F000C | Combines the WO (Write Owner), WD (Write DACL), RC (Read Control), and DE        |
	//	|                               | (Delete) bits of the ACCESS_MASK data type with the following protocol-specific  |
	//	|                               | bits: 0x00000004 (bit 29): Access rights for printers to perform administrative  |
	//	|                               | tasks. 0x00000008 (bit 28): Access rights for printers to perform basic printing |
	//	|                               | operations. These printing-specific access rights allow a client basic and       |
	//	|                               | administrative use of print queues.                                              |
	//	+-------------------------------+----------------------------------------------------------------------------------+
	//
	// For calls to IRPCAsyncNotify_RegisterClient with NotifyFilter set to kAllUsers, if
	// pName is set to NULL, the server SHOULD fail the call if the calling principal lacks
	// any of the server access rights specified by SERVER_ALL_ACCESS. If pName points to
	// the name of a print queue, the server SHOULD fail the call if the calling principal
	// lacks any of the print queue access rights specified by PRINTER_ALL_ACCESS. For additional
	// information concerning access rights, see [MS-AZOD] section 1.1.1.5.
	RegisterClient(context.Context, *RegisterClientRequest, ...dcerpc.CallOption) (*RegisterClientResponse, error)

	// The IRPCAsyncNotify_UnregisterClient method is called by registered clients to unregister
	// previously-registered remote objects. For this call to succeed, the remote object
	// MUST have already successfully called IRPCAsyncNotify_RegisterClient.
	//
	// Return Values: This method MUST return an HRESULT success value ([MS-ERREF] section
	// 2.1.1) to indicate success, or an HRESULT error value to indicate failure. The client
	// MUST consider all error return values fatal and report them to the higher-level caller.
	//
	// Exceptions Thrown: No exceptions are thrown beyond those thrown by the underlying
	// RPC protocol [MS-RPCE].
	//
	// If a client call to IRPCAsyncNotify_GetNewChannel or IRPCAsyncNotify_GetNotification
	// is blocked on the server waiting for a notification channel or notification to become
	// available, the server MUST process a client call to IRPCAsyncNotify_UnregisterClient
	// without waiting for the notification channel or notification.
	//
	// A server MUST NOT do the following:
	//
	// * Indicate success to a client call of IRPCAsyncNotify_UnregisterClient unless a
	// prior call to IRPCAsyncNotify_RegisterClient succeeded using the same PRPCREMOTEOBJECT
	// ( a47aca7c-fcc3-4151-8fb6-1de5225ecfa5 ) value.
	//
	// * Indicate success to a client call of IRPCAsyncNotify_UnregisterClient following
	// a prior successful call to IRPCAsyncNotify_UnregisterClient by using the same PRPCREMOTEOBJECT
	// value.
	//
	// A client MUST NOT do the following:
	//
	// * Call IRPCAsyncNotify_UnregisterClient, unless a prior call to IRPCAsyncNotify_RegisterClient
	// succeeded by using the same PRPCREMOTEOBJECT value.
	//
	// * Call IRPCAsyncNotify_UnregisterClient following a prior call to IRPCAsyncNotify_UnregisterClient
	// by using the same PRPCREMOTEOBJECT value.
	UnregisterClient(context.Context, *UnregisterClientRequest, ...dcerpc.CallOption) (*UnregisterClientResponse, error)

	// The IRPCAsyncNotify_GetNewChannel method returns an array of pointers to print notification
	// channels. This method MUST only be used with bidirectional communication mode.
	//
	// Return Values: This method MUST return zero to indicate success, or an HRESULT error
	// value ([MS-ERREF] section 2.1.1) to indicate failure. Protocol-specific error values
	// are defined in the following table. The client SHOULD treat all error return values
	// the same, except where noted.
	//
	//	+--------------+----------------------------------------------------------------------------------+
	//	|    RETURN    |                                                                                  |
	//	|    VALUE     |                                   DESCRIPTION                                    |
	//	|              |                                                                                  |
	//	+--------------+----------------------------------------------------------------------------------+
	//	+--------------+----------------------------------------------------------------------------------+
	//	| 0x8004000C   | The server has not yet returned from a previous call to this method with the     |
	//	|              | same remote object. If this error value is returned, the client SHOULD NOT retry |
	//	|              | this call before the previous call to this method with the specified remote      |
	//	|              | object has completed.                                                            |
	//	+--------------+----------------------------------------------------------------------------------+
	//	| 0x8007000E   | The server does not have enough memory for the new channel.                      |
	//	+--------------+----------------------------------------------------------------------------------+
	//	| 0x8007071A   | Incoming notifications have been terminated. Upon completion of this call with   |
	//	|              | this return value, the server MUST fail subsequent calls to this method with the |
	//	|              | same remote object. If this error value is returned, the client SHOULD NOT retry |
	//	|              | this call.                                                                       |
	//	+--------------+----------------------------------------------------------------------------------+
	//
	// Exceptions Thrown: An exception code of 0x8004000C or 0x8007071A SHOULD be thrown
	// by the server under the circumstances described in the preceding table for the corresponding
	// return values. The client MUST treat these exception codes exactly as it would treat
	// the same return values. No additional exceptions are thrown beyond those thrown by
	// the underlying RPC protocol [MS-RPCE].
	//
	// Unless specified otherwise, if a failure is indicated by an error return or an exception,
	// the client SHOULD retry this method call by performing the following steps:
	//
	// *
	//
	// Call IRPCRemoteObject_Create to generate a new PRPCREMOTEOBJECT (section 2.2.4) (
	// a47aca7c-fcc3-4151-8fb6-1de5225ecfa5 ).
	//
	// *
	//
	// Call IRPCAsyncNotify_RegisterClient with the new PRPCREMOTEOBJECT.
	//
	// *
	//
	// Call IRPCAsyncNotify_GetNewChannel with the new PRPCREMOTEOBJECT.
	//
	// Retries SHOULD be separated by time intervals decaying from 1 second to 1 minute
	// to reduce a potential burden on the server. Retries SHOULD terminate when the above
	// sequence succeeds or the client determines that it is no longer interested in notifications
	// for the particular combination of notification type, print queue name, conversation
	// style, and user identity filter that were originally specified in the call to IRPCAsyncNotify_RegisterClient.
	//
	// If successful, the IRPCAsyncNotify_GetNewChannel method MUST return an array of pointers
	// to print notification channels.
	//
	// A server MUST NOT do the following:
	//
	// * Indicate success to a client call of IRPCAsyncNotify_GetNewChannel unless a prior
	// call to IRPCAsyncNotify_RegisterClient succeeded using the same PRPCREMOTEOBJECT
	// value.
	//
	// * Indicate success to a client call of IRPCAsyncNotify_GetNewChannel following a
	// prior successful call to IRPCAsyncNotify_UnregisterClient ( 20fa79b6-4905-4a50-83d5-2bc76525b3c9
	// ) using the same PRPCREMOTEOBJECT value.
	//
	// * Complete a call to IRPCAsyncNotify_GetNewChannel unless an unreturned notification
	// channel is available on the *Bidirectional Notification Channel Queue* associated
	// with the *Client Registration* (Abstract Data Model, section 3.1.1.1), or an abnormal
	// event happened, such as an initiated server shutdown sequence.
	//
	// A client SHOULD do the following:
	//
	// * Call IRPCAsyncNotify_GetNewChannel in response to a prior successful return from
	// IRPCAsyncNotify_RegisterClient or IRPCAsyncNotify_GetNewChannel.
	//
	// * Call IRPCAsyncNotify_GetNotificationSendResponse ( 8c4aab2d-5dfe-469d-a9e3-003869921e45
	// ) in response to a prior successful return from IRPCAsyncNotify_GetNewChannel.
	//
	// A client MUST NOT do the following:
	//
	// * Call IRPCAsyncNotify_GetNewChannel, unless a prior call to IRPCAsyncNotify_RegisterClient
	// succeeded by using the same PRPCREMOTEOBJECT value. <8> ( cdec7a7c-2b2c-4b81-a40a-b12d69f880ee#Appendix_A_8
	// )
	//
	// * Call IRPCAsyncNotify_GetNewChannel following a prior call to IRPCAsyncNotify_UnregisterClient
	// by using the same PRPCREMOTEOBJECT value. <9> ( cdec7a7c-2b2c-4b81-a40a-b12d69f880ee#Appendix_A_9
	// )
	GetNewChannel(context.Context, *GetNewChannelRequest, ...dcerpc.CallOption) (*GetNewChannelResponse, error)

	// The IRPCAsyncNotify_GetNotificationSendResponse method sends a client response to
	// the server and returns the next notification sent by way of the same channel when
	// it becomes available. This method MUST be used only with bidirectional communication
	// mode.
	//
	// Return Values: This method MUST return zero to indicate success, or an HRESULT error
	// value ([MS-ERREF] section 2.1.1) to indicate failure. Protocol-specific error values
	// are defined in the following table. The client MUST consider all error return values
	// fatal and report them to the higher-level caller.
	//
	//	+--------------+----------------------------------------------------------------------------------+
	//	|    RETURN    |                                                                                  |
	//	|    VALUE     |                                   DESCRIPTION                                    |
	//	|              |                                                                                  |
	//	+--------------+----------------------------------------------------------------------------------+
	//	+--------------+----------------------------------------------------------------------------------+
	//	| 0x80040008   | The notification channel represented by pChannel was previously closed.          |
	//	+--------------+----------------------------------------------------------------------------------+
	//	| 0x8004000C   | The server has not yet returned from a previous call to                          |
	//	|              | IRPCAsyncNotify_GetNotificationSendResponse or IRPCAsyncNotify_CloseChannel      |
	//	|              | (section 3.1.1.4.6) with the same notification channel.                          |
	//	+--------------+----------------------------------------------------------------------------------+
	//	| 0x80040012   | The size of the client-to-server response exceeded the maximum size.             |
	//	+--------------+----------------------------------------------------------------------------------+
	//	| 0x80040014   | The notification type identifier is different from the notification type of the  |
	//	|              | notification channel.                                                            |
	//	+--------------+----------------------------------------------------------------------------------+
	//	| 0x8007000E   | The server does not have enough memory to complete the request.                  |
	//	+--------------+----------------------------------------------------------------------------------+
	//
	// Exceptions Thrown: No exceptions are thrown beyond those thrown by the underlying
	// RPC protocol [MS-RPCE].
	//
	// If a failure is indicated by an error return or an exception, the client SHOULD close
	// the channel.
	//
	// The first call to this method on the newly opened notification channel serves as
	// a mediator among all the clients that registered themselves for the given notification
	// type. This MUST be done by blocking all calls from clients until a matching server-side
	// event occurs, including the following:
	//
	// * The channel issues a notification.
	//
	// * An abnormal condition occurs, such as an initiated server shutdown sequence.
	//
	// * The server receives a client request to close the channel.
	GetNotificationSendResponse(context.Context, *GetNotificationSendResponseRequest, ...dcerpc.CallOption) (*GetNotificationSendResponseResponse, error)

	// The IRPCAsyncNotify_GetNotification method returns notification data from the print
	// server. This method MUST NOT be used with bidirectional communication mode.
	//
	// Return Values: This method MUST return zero to indicate success, or an HRESULT error
	// value ([MS-ERREF] section 2.1.1) to indicate failure. Protocol-specific error values
	// are defined in the following table. The client SHOULD treat all error return values
	// the same, except where noted.
	//
	//	+--------------+----------------------------------------------------------------------------------+
	//	|    RETURN    |                                                                                  |
	//	|    VALUE     |                                   DESCRIPTION                                    |
	//	|              |                                                                                  |
	//	+--------------+----------------------------------------------------------------------------------+
	//	+--------------+----------------------------------------------------------------------------------+
	//	| 0x8004000C   | The server has not yet returned from a previous call to this method with the     |
	//	|              | same remote object. If this error value is returned, the client SHOULD NOT retry |
	//	|              | this call before the previous call to this method with the specified remote      |
	//	|              | object has completed.                                                            |
	//	+--------------+----------------------------------------------------------------------------------+
	//	| 0x8007000E   | The server does not have enough memory to complete the request.                  |
	//	+--------------+----------------------------------------------------------------------------------+
	//	| 0x8007071A   | Incoming notifications have been terminated. Upon completion of this call with   |
	//	|              | this return value, the server MUST fail subsequent calls to this method with the |
	//	|              | same remote object. If this error value is returned, the client SHOULD NOT retry |
	//	|              | this call.                                                                       |
	//	+--------------+----------------------------------------------------------------------------------+
	//
	// Exceptions Thrown: An exception code of 0x08004000C or 0x8007071A SHOULD be thrown
	// by the server under the circumstances described in the preceding table for the corresponding
	// return values. The client MUST treat these exception codes exactly as it would treat
	// the same return values. No additional exceptions are thrown beyond those thrown by
	// the underlying RPC protocol [MS-RPCE].
	//
	// Unless specified otherwise, if a failure is indicated by an error return or an exception,
	// the client SHOULD retry this method call by performing the following steps:
	//
	// *
	//
	// Call IRPCRemoteObject_Create (section 3.1.2.4.1) ( e3786f60-0b93-4c5e-8cd1-3f0487e4310a
	// ) to generate a new PRPCREMOTEOBJECT (section 2.2.4) ( a47aca7c-fcc3-4151-8fb6-1de5225ecfa5
	// ).
	//
	// *
	//
	// Call IRPCAsyncNotify_RegisterClient with the new PRPCREMOTEOBJECT.
	//
	// *
	//
	// Call IRPCAsyncNotify_GetNotification with the new PRPCREMOTEOBJECT.
	//
	// Retries SHOULD be separated by time intervals decaying from 1 second to 1 minute
	// to reduce a potential burden on the server. Retries SHOULD terminate when the above
	// sequence succeeds or the client determines that it is no longer interested in notifications
	// for the particular combination of notification type, print queue name, conversation
	// style, and user identity filter that were originally specified in the call to IRPCAsyncNotify_RegisterClient.
	//
	// The IRPCAsyncNotify_GetNotification method MUST return data from the server that
	// matches the registration for the given remote object.
	//
	// A server MUST NOT do the following:
	//
	// * Indicate success to a client call of IRPCAsyncNotify_GetNotification unless a prior
	// call to IRPCAsyncNotify_RegisterClient succeeded using the same PRPCREMOTEOBJECT
	// value.
	//
	// * Indicate success to a client call of IRPCAsyncNotify_GetNotification following
	// a prior successful call to IRPCAsyncNotify_UnregisterClient ( 20fa79b6-4905-4a50-83d5-2bc76525b3c9
	// ) using the same PRPCREMOTEOBJECT value.
	//
	// * Complete a call to IRPCAsyncNotify_GetNotification until the *Unidirectional Notification
	// Queue* associated with the *Client Registration* ( Abstract Data Model (section 3.1.1.1)
	// ( bd69159c-f3d8-4f7b-b2c3-f9efec7c9f62 ) ) contains an unreturned notification, or
	// an abnormal condition occurs. An example of an abnormal condition is an initiated
	// server shutdown sequence or remote object unregistration. An abnormal condition will
	// result in a failure error code returned prior to the server having data.
	//
	// A server SHOULD do the following:
	//
	// * Discard unidirectional notifications in the absence of corresponding registered
	// clients.
	//
	// * Buffer unidirectional notifications, up to some implementation-defined limit, <10>
	// ( cdec7a7c-2b2c-4b81-a40a-b12d69f880ee#Appendix_A_10 ) for each registered client
	// that does not have pending IRPCAsyncNotify_GetNotification calls.
	//
	// If a client wants to receive further notifications from the server, the client SHOULD
	// call IRPCAsyncNotify_GetNotification in response to a prior successful return from
	// IRPCAsyncNotify_GetNotification. When the client no longer wants to receive notifications
	// from the server, it SHOULD call IRPCAsyncNotify_UnregisterClient, either before or
	// after the return from IRPCAsyncNotify_GetNotification.
	//
	// A client MUST NOT do the following:
	//
	// * Call IRPCAsyncNotify_GetNotification unless a prior call to IRPCAsyncNotify_RegisterClient
	// succeeded, using the same PRPCREMOTEOBJECT value.
	//
	// * Call IRPCAsyncNotify_GetNotification following a prior call to IRPCAsyncNotify_UnregisterClient
	// by using the same PRPCREMOTEOBJECT value.
	GetNotification(context.Context, *GetNotificationRequest, ...dcerpc.CallOption) (*GetNotificationResponse, error)

	// The IRPCAsyncNotify_CloseChannel method sends a final response on the notification
	// channel and closes it. This method MUST NOT be used with unidirectional communication
	// mode.
	//
	// Return Values: This method MUST return zero or an HRESULT success value ([MS-ERREF]
	// section 2.1.1) to indicate success, or an HRESULT error value to indicate failure.
	//
	// Protocol-specific success values are defined in the following table.
	//
	//	+--------------+------------------------------------------+
	//	|    RETURN    |                                          |
	//	|    VALUE     |               DESCRIPTION                |
	//	|              |                                          |
	//	+--------------+------------------------------------------+
	//	+--------------+------------------------------------------+
	//	| 0x00040010   | Another client has acquired the channel. |
	//	+--------------+------------------------------------------+
	//
	// Protocol-specific error values are defined in the following table. The client MUST
	// consider all error return values fatal and report them to the higher-level caller.
	//
	//	+--------------+----------------------------------------------------------------------------------+
	//	|    RETURN    |                                                                                  |
	//	|    VALUE     |                                   DESCRIPTION                                    |
	//	|              |                                                                                  |
	//	+--------------+----------------------------------------------------------------------------------+
	//	+--------------+----------------------------------------------------------------------------------+
	//	| 0x80040012   | The response exceeds the maximum size allowed by the server.                     |
	//	+--------------+----------------------------------------------------------------------------------+
	//	| 0x80040014   | The notification type identifier is different from the notification type of the  |
	//	|              | notification channel.                                                            |
	//	+--------------+----------------------------------------------------------------------------------+
	//	| 0x8007000E   | The server does not have enough memory to complete the request.                  |
	//	+--------------+----------------------------------------------------------------------------------+
	//
	// Exceptions Thrown: No exceptions are thrown beyond those thrown by the underlying
	// RPC protocol [MS-RPCE].
	//
	// If a client call to IRPCAsyncNotify_GetNotificationSendResponse is blocked on the
	// server, waiting for a notification to become available on a notification channel,
	// then the server MUST process a client call to this method on the same notification
	// channel without waiting for a notification.
	//
	// A client MUST NOT call IRPCAsyncNotify_CloseChannel following a prior successful
	// return from IRPCAsyncNotify_GetNotificationSendResponse with a NULL value of pChannel
	// parameter or following a prior successful return from IRPCAsyncNotify_CloseChannel.<11>
	CloseChannel(context.Context, *CloseChannelRequest, ...dcerpc.CallOption) (*CloseChannelResponse, error)

	// AlterContext alters the client context.
	AlterContext(context.Context, ...dcerpc.Option) error
}

IRPCAsyncNotify interface.

func NewIrpcAsyncNotifyClient 

func NewIrpcAsyncNotifyClient(ctx context.Context, cc dcerpc.Conn, opts ...dcerpc.Option) (IrpcAsyncNotifyClient, error)

type IrpcAsyncNotifyServer 

type IrpcAsyncNotifyServer interface {

	// The IRPCAsyncNotify_RegisterClient method is called by clients to register to receive
	// notifications and to associate the parameters describing the set of notifications
	// they are registering to receive with a remote object.
	//
	// Return Values: This method MUST return zero to indicate success, or an HRESULT error
	// value ([MS-ERREF] section 2.1.1) to indicate failure. Protocol-specific error values
	// are defined in the following table. The client SHOULD treat all error return values
	// the same, except where noted.
	//
	//	+--------------+----------------------------------------------------------------------------------+
	//	|    RETURN    |                                                                                  |
	//	|    VALUE     |                                   DESCRIPTION                                    |
	//	|              |                                                                                  |
	//	+--------------+----------------------------------------------------------------------------------+
	//	+--------------+----------------------------------------------------------------------------------+
	//	| 0x80070005   | The client does not have authorization to register for notifications with the    |
	//	|              | set of parameters specified in this call. If this error value is returned, the   |
	//	|              | client SHOULD NOT retry this call; the client SHOULD consider the error to be    |
	//	|              | fatal and report it to the higher level caller.                                  |
	//	+--------------+----------------------------------------------------------------------------------+
	//	| 0x8007000E   | The server does not have enough memory for the new registration.                 |
	//	+--------------+----------------------------------------------------------------------------------+
	//	| 0x80070015   | The server has reached its maximum registration limit.                           |
	//	+--------------+----------------------------------------------------------------------------------+
	//	| 0x8007007B   | The pName parameter does not conform to the format specified above. If this      |
	//	|              | error value is returned, the client SHOULD NOT retry this call; the client       |
	//	|              | SHOULD consider the error to be fatal and report it to the higher level caller.  |
	//	+--------------+----------------------------------------------------------------------------------+
	//
	// Exceptions Thrown: No exceptions are thrown beyond those thrown by the underlying
	// RPC protocol [MS-RPCE].
	//
	// Unless specified otherwise, if a failure is indicated by an error return or an exception,
	// the client SHOULD retry this method call by performing the following steps:
	//
	// *
	//
	// Call IRPCRemoteObject_Create to generate a new PRPCREMOTEOBJECT (section 2.2.4) (
	// a47aca7c-fcc3-4151-8fb6-1de5225ecfa5 ).
	//
	// *
	//
	// Call IRPCAsyncNotify_RegisterClient with the new PRPCREMOTEOBJECT.
	//
	// Retries SHOULD be separated by time intervals decaying from 1 second to 1 minute
	// to reduce a potential burden on the server.
	//
	// The IRPCAsyncNotify_RegisterClient method MUST be called by clients to register for
	// receiving notifications. Servers MUST associate the given remote object with the
	// registration parameters specified.
	//
	// A client MUST NOT call IRPCAsyncNotify_RegisterClient if a prior call to IRPCAsyncNotify_RegisterClient
	// succeeded using the same PRPCREMOTEOBJECT value, unless a later call to IRPCAsyncNotify_UnregisterClient
	// also succeeded.
	//
	// If registering for unidirectional communication mode, a client SHOULD call IRPCAsyncNotify_GetNotification
	// after a successful call to IRPCAsyncNotify_RegisterClient using the same PRPCREMOTEOBJECT
	// value.
	//
	// If registering for bidirectional communication mode, a client SHOULD call IRPCAsyncNotify_GetNewChannel
	// after a successful call to IRPCAsyncNotify_RegisterClient using the same PRPCREMOTEOBJECT
	// value.
	//
	// Servers MUST support the concurrent registration of multiple remote objects with
	// different registration parameters, including notification type, filter, and communication
	// mode.
	//
	// Servers SHOULD consider the security and privacy context prior to letting clients
	// monitor and receive notifications for all user identities. Relevant access rights
	// are defined in the following table.
	//
	//	+-------------------------------+----------------------------------------------------------------------------------+
	//	|                               |                                                                                  |
	//	|          NAME/VALUE           |                                   DESCRIPTION                                    |
	//	|                               |                                                                                  |
	//	+-------------------------------+----------------------------------------------------------------------------------+
	//	+-------------------------------+----------------------------------------------------------------------------------+
	//	| SERVER_ALL_ACCESS 0x000F0003  | Combines the WO (Write Owner), WD (Write DACL), RC (Read Control), and DE        |
	//	|                               | (Delete) bits of the ACCESS_MASK data type ([MS-DTYP] section 2.4.3) with        |
	//	|                               | the following protocol-specific bits: 0x00000001 (bit 31): Access rights to      |
	//	|                               | administer print servers. 0x00000002 (bit 30): Access rights to enumerate print  |
	//	|                               | servers. These printing-specific access rights allow a client to administer the  |
	//	|                               | server and to enumerate server components such as print queues.                  |
	//	+-------------------------------+----------------------------------------------------------------------------------+
	//	| PRINTER_ALL_ACCESS 0x000F000C | Combines the WO (Write Owner), WD (Write DACL), RC (Read Control), and DE        |
	//	|                               | (Delete) bits of the ACCESS_MASK data type with the following protocol-specific  |
	//	|                               | bits: 0x00000004 (bit 29): Access rights for printers to perform administrative  |
	//	|                               | tasks. 0x00000008 (bit 28): Access rights for printers to perform basic printing |
	//	|                               | operations. These printing-specific access rights allow a client basic and       |
	//	|                               | administrative use of print queues.                                              |
	//	+-------------------------------+----------------------------------------------------------------------------------+
	//
	// For calls to IRPCAsyncNotify_RegisterClient with NotifyFilter set to kAllUsers, if
	// pName is set to NULL, the server SHOULD fail the call if the calling principal lacks
	// any of the server access rights specified by SERVER_ALL_ACCESS. If pName points to
	// the name of a print queue, the server SHOULD fail the call if the calling principal
	// lacks any of the print queue access rights specified by PRINTER_ALL_ACCESS. For additional
	// information concerning access rights, see [MS-AZOD] section 1.1.1.5.
	RegisterClient(context.Context, *RegisterClientRequest) (*RegisterClientResponse, error)

	// The IRPCAsyncNotify_UnregisterClient method is called by registered clients to unregister
	// previously-registered remote objects. For this call to succeed, the remote object
	// MUST have already successfully called IRPCAsyncNotify_RegisterClient.
	//
	// Return Values: This method MUST return an HRESULT success value ([MS-ERREF] section
	// 2.1.1) to indicate success, or an HRESULT error value to indicate failure. The client
	// MUST consider all error return values fatal and report them to the higher-level caller.
	//
	// Exceptions Thrown: No exceptions are thrown beyond those thrown by the underlying
	// RPC protocol [MS-RPCE].
	//
	// If a client call to IRPCAsyncNotify_GetNewChannel or IRPCAsyncNotify_GetNotification
	// is blocked on the server waiting for a notification channel or notification to become
	// available, the server MUST process a client call to IRPCAsyncNotify_UnregisterClient
	// without waiting for the notification channel or notification.
	//
	// A server MUST NOT do the following:
	//
	// * Indicate success to a client call of IRPCAsyncNotify_UnregisterClient unless a
	// prior call to IRPCAsyncNotify_RegisterClient succeeded using the same PRPCREMOTEOBJECT
	// ( a47aca7c-fcc3-4151-8fb6-1de5225ecfa5 ) value.
	//
	// * Indicate success to a client call of IRPCAsyncNotify_UnregisterClient following
	// a prior successful call to IRPCAsyncNotify_UnregisterClient by using the same PRPCREMOTEOBJECT
	// value.
	//
	// A client MUST NOT do the following:
	//
	// * Call IRPCAsyncNotify_UnregisterClient, unless a prior call to IRPCAsyncNotify_RegisterClient
	// succeeded by using the same PRPCREMOTEOBJECT value.
	//
	// * Call IRPCAsyncNotify_UnregisterClient following a prior call to IRPCAsyncNotify_UnregisterClient
	// by using the same PRPCREMOTEOBJECT value.
	UnregisterClient(context.Context, *UnregisterClientRequest) (*UnregisterClientResponse, error)

	// The IRPCAsyncNotify_GetNewChannel method returns an array of pointers to print notification
	// channels. This method MUST only be used with bidirectional communication mode.
	//
	// Return Values: This method MUST return zero to indicate success, or an HRESULT error
	// value ([MS-ERREF] section 2.1.1) to indicate failure. Protocol-specific error values
	// are defined in the following table. The client SHOULD treat all error return values
	// the same, except where noted.
	//
	//	+--------------+----------------------------------------------------------------------------------+
	//	|    RETURN    |                                                                                  |
	//	|    VALUE     |                                   DESCRIPTION                                    |
	//	|              |                                                                                  |
	//	+--------------+----------------------------------------------------------------------------------+
	//	+--------------+----------------------------------------------------------------------------------+
	//	| 0x8004000C   | The server has not yet returned from a previous call to this method with the     |
	//	|              | same remote object. If this error value is returned, the client SHOULD NOT retry |
	//	|              | this call before the previous call to this method with the specified remote      |
	//	|              | object has completed.                                                            |
	//	+--------------+----------------------------------------------------------------------------------+
	//	| 0x8007000E   | The server does not have enough memory for the new channel.                      |
	//	+--------------+----------------------------------------------------------------------------------+
	//	| 0x8007071A   | Incoming notifications have been terminated. Upon completion of this call with   |
	//	|              | this return value, the server MUST fail subsequent calls to this method with the |
	//	|              | same remote object. If this error value is returned, the client SHOULD NOT retry |
	//	|              | this call.                                                                       |
	//	+--------------+----------------------------------------------------------------------------------+
	//
	// Exceptions Thrown: An exception code of 0x8004000C or 0x8007071A SHOULD be thrown
	// by the server under the circumstances described in the preceding table for the corresponding
	// return values. The client MUST treat these exception codes exactly as it would treat
	// the same return values. No additional exceptions are thrown beyond those thrown by
	// the underlying RPC protocol [MS-RPCE].
	//
	// Unless specified otherwise, if a failure is indicated by an error return or an exception,
	// the client SHOULD retry this method call by performing the following steps:
	//
	// *
	//
	// Call IRPCRemoteObject_Create to generate a new PRPCREMOTEOBJECT (section 2.2.4) (
	// a47aca7c-fcc3-4151-8fb6-1de5225ecfa5 ).
	//
	// *
	//
	// Call IRPCAsyncNotify_RegisterClient with the new PRPCREMOTEOBJECT.
	//
	// *
	//
	// Call IRPCAsyncNotify_GetNewChannel with the new PRPCREMOTEOBJECT.
	//
	// Retries SHOULD be separated by time intervals decaying from 1 second to 1 minute
	// to reduce a potential burden on the server. Retries SHOULD terminate when the above
	// sequence succeeds or the client determines that it is no longer interested in notifications
	// for the particular combination of notification type, print queue name, conversation
	// style, and user identity filter that were originally specified in the call to IRPCAsyncNotify_RegisterClient.
	//
	// If successful, the IRPCAsyncNotify_GetNewChannel method MUST return an array of pointers
	// to print notification channels.
	//
	// A server MUST NOT do the following:
	//
	// * Indicate success to a client call of IRPCAsyncNotify_GetNewChannel unless a prior
	// call to IRPCAsyncNotify_RegisterClient succeeded using the same PRPCREMOTEOBJECT
	// value.
	//
	// * Indicate success to a client call of IRPCAsyncNotify_GetNewChannel following a
	// prior successful call to IRPCAsyncNotify_UnregisterClient ( 20fa79b6-4905-4a50-83d5-2bc76525b3c9
	// ) using the same PRPCREMOTEOBJECT value.
	//
	// * Complete a call to IRPCAsyncNotify_GetNewChannel unless an unreturned notification
	// channel is available on the *Bidirectional Notification Channel Queue* associated
	// with the *Client Registration* (Abstract Data Model, section 3.1.1.1), or an abnormal
	// event happened, such as an initiated server shutdown sequence.
	//
	// A client SHOULD do the following:
	//
	// * Call IRPCAsyncNotify_GetNewChannel in response to a prior successful return from
	// IRPCAsyncNotify_RegisterClient or IRPCAsyncNotify_GetNewChannel.
	//
	// * Call IRPCAsyncNotify_GetNotificationSendResponse ( 8c4aab2d-5dfe-469d-a9e3-003869921e45
	// ) in response to a prior successful return from IRPCAsyncNotify_GetNewChannel.
	//
	// A client MUST NOT do the following:
	//
	// * Call IRPCAsyncNotify_GetNewChannel, unless a prior call to IRPCAsyncNotify_RegisterClient
	// succeeded by using the same PRPCREMOTEOBJECT value. <8> ( cdec7a7c-2b2c-4b81-a40a-b12d69f880ee#Appendix_A_8
	// )
	//
	// * Call IRPCAsyncNotify_GetNewChannel following a prior call to IRPCAsyncNotify_UnregisterClient
	// by using the same PRPCREMOTEOBJECT value. <9> ( cdec7a7c-2b2c-4b81-a40a-b12d69f880ee#Appendix_A_9
	// )
	GetNewChannel(context.Context, *GetNewChannelRequest) (*GetNewChannelResponse, error)

	// The IRPCAsyncNotify_GetNotificationSendResponse method sends a client response to
	// the server and returns the next notification sent by way of the same channel when
	// it becomes available. This method MUST be used only with bidirectional communication
	// mode.
	//
	// Return Values: This method MUST return zero to indicate success, or an HRESULT error
	// value ([MS-ERREF] section 2.1.1) to indicate failure. Protocol-specific error values
	// are defined in the following table. The client MUST consider all error return values
	// fatal and report them to the higher-level caller.
	//
	//	+--------------+----------------------------------------------------------------------------------+
	//	|    RETURN    |                                                                                  |
	//	|    VALUE     |                                   DESCRIPTION                                    |
	//	|              |                                                                                  |
	//	+--------------+----------------------------------------------------------------------------------+
	//	+--------------+----------------------------------------------------------------------------------+
	//	| 0x80040008   | The notification channel represented by pChannel was previously closed.          |
	//	+--------------+----------------------------------------------------------------------------------+
	//	| 0x8004000C   | The server has not yet returned from a previous call to                          |
	//	|              | IRPCAsyncNotify_GetNotificationSendResponse or IRPCAsyncNotify_CloseChannel      |
	//	|              | (section 3.1.1.4.6) with the same notification channel.                          |
	//	+--------------+----------------------------------------------------------------------------------+
	//	| 0x80040012   | The size of the client-to-server response exceeded the maximum size.             |
	//	+--------------+----------------------------------------------------------------------------------+
	//	| 0x80040014   | The notification type identifier is different from the notification type of the  |
	//	|              | notification channel.                                                            |
	//	+--------------+----------------------------------------------------------------------------------+
	//	| 0x8007000E   | The server does not have enough memory to complete the request.                  |
	//	+--------------+----------------------------------------------------------------------------------+
	//
	// Exceptions Thrown: No exceptions are thrown beyond those thrown by the underlying
	// RPC protocol [MS-RPCE].
	//
	// If a failure is indicated by an error return or an exception, the client SHOULD close
	// the channel.
	//
	// The first call to this method on the newly opened notification channel serves as
	// a mediator among all the clients that registered themselves for the given notification
	// type. This MUST be done by blocking all calls from clients until a matching server-side
	// event occurs, including the following:
	//
	// * The channel issues a notification.
	//
	// * An abnormal condition occurs, such as an initiated server shutdown sequence.
	//
	// * The server receives a client request to close the channel.
	GetNotificationSendResponse(context.Context, *GetNotificationSendResponseRequest) (*GetNotificationSendResponseResponse, error)

	// The IRPCAsyncNotify_GetNotification method returns notification data from the print
	// server. This method MUST NOT be used with bidirectional communication mode.
	//
	// Return Values: This method MUST return zero to indicate success, or an HRESULT error
	// value ([MS-ERREF] section 2.1.1) to indicate failure. Protocol-specific error values
	// are defined in the following table. The client SHOULD treat all error return values
	// the same, except where noted.
	//
	//	+--------------+----------------------------------------------------------------------------------+
	//	|    RETURN    |                                                                                  |
	//	|    VALUE     |                                   DESCRIPTION                                    |
	//	|              |                                                                                  |
	//	+--------------+----------------------------------------------------------------------------------+
	//	+--------------+----------------------------------------------------------------------------------+
	//	| 0x8004000C   | The server has not yet returned from a previous call to this method with the     |
	//	|              | same remote object. If this error value is returned, the client SHOULD NOT retry |
	//	|              | this call before the previous call to this method with the specified remote      |
	//	|              | object has completed.                                                            |
	//	+--------------+----------------------------------------------------------------------------------+
	//	| 0x8007000E   | The server does not have enough memory to complete the request.                  |
	//	+--------------+----------------------------------------------------------------------------------+
	//	| 0x8007071A   | Incoming notifications have been terminated. Upon completion of this call with   |
	//	|              | this return value, the server MUST fail subsequent calls to this method with the |
	//	|              | same remote object. If this error value is returned, the client SHOULD NOT retry |
	//	|              | this call.                                                                       |
	//	+--------------+----------------------------------------------------------------------------------+
	//
	// Exceptions Thrown: An exception code of 0x08004000C or 0x8007071A SHOULD be thrown
	// by the server under the circumstances described in the preceding table for the corresponding
	// return values. The client MUST treat these exception codes exactly as it would treat
	// the same return values. No additional exceptions are thrown beyond those thrown by
	// the underlying RPC protocol [MS-RPCE].
	//
	// Unless specified otherwise, if a failure is indicated by an error return or an exception,
	// the client SHOULD retry this method call by performing the following steps:
	//
	// *
	//
	// Call IRPCRemoteObject_Create (section 3.1.2.4.1) ( e3786f60-0b93-4c5e-8cd1-3f0487e4310a
	// ) to generate a new PRPCREMOTEOBJECT (section 2.2.4) ( a47aca7c-fcc3-4151-8fb6-1de5225ecfa5
	// ).
	//
	// *
	//
	// Call IRPCAsyncNotify_RegisterClient with the new PRPCREMOTEOBJECT.
	//
	// *
	//
	// Call IRPCAsyncNotify_GetNotification with the new PRPCREMOTEOBJECT.
	//
	// Retries SHOULD be separated by time intervals decaying from 1 second to 1 minute
	// to reduce a potential burden on the server. Retries SHOULD terminate when the above
	// sequence succeeds or the client determines that it is no longer interested in notifications
	// for the particular combination of notification type, print queue name, conversation
	// style, and user identity filter that were originally specified in the call to IRPCAsyncNotify_RegisterClient.
	//
	// The IRPCAsyncNotify_GetNotification method MUST return data from the server that
	// matches the registration for the given remote object.
	//
	// A server MUST NOT do the following:
	//
	// * Indicate success to a client call of IRPCAsyncNotify_GetNotification unless a prior
	// call to IRPCAsyncNotify_RegisterClient succeeded using the same PRPCREMOTEOBJECT
	// value.
	//
	// * Indicate success to a client call of IRPCAsyncNotify_GetNotification following
	// a prior successful call to IRPCAsyncNotify_UnregisterClient ( 20fa79b6-4905-4a50-83d5-2bc76525b3c9
	// ) using the same PRPCREMOTEOBJECT value.
	//
	// * Complete a call to IRPCAsyncNotify_GetNotification until the *Unidirectional Notification
	// Queue* associated with the *Client Registration* ( Abstract Data Model (section 3.1.1.1)
	// ( bd69159c-f3d8-4f7b-b2c3-f9efec7c9f62 ) ) contains an unreturned notification, or
	// an abnormal condition occurs. An example of an abnormal condition is an initiated
	// server shutdown sequence or remote object unregistration. An abnormal condition will
	// result in a failure error code returned prior to the server having data.
	//
	// A server SHOULD do the following:
	//
	// * Discard unidirectional notifications in the absence of corresponding registered
	// clients.
	//
	// * Buffer unidirectional notifications, up to some implementation-defined limit, <10>
	// ( cdec7a7c-2b2c-4b81-a40a-b12d69f880ee#Appendix_A_10 ) for each registered client
	// that does not have pending IRPCAsyncNotify_GetNotification calls.
	//
	// If a client wants to receive further notifications from the server, the client SHOULD
	// call IRPCAsyncNotify_GetNotification in response to a prior successful return from
	// IRPCAsyncNotify_GetNotification. When the client no longer wants to receive notifications
	// from the server, it SHOULD call IRPCAsyncNotify_UnregisterClient, either before or
	// after the return from IRPCAsyncNotify_GetNotification.
	//
	// A client MUST NOT do the following:
	//
	// * Call IRPCAsyncNotify_GetNotification unless a prior call to IRPCAsyncNotify_RegisterClient
	// succeeded, using the same PRPCREMOTEOBJECT value.
	//
	// * Call IRPCAsyncNotify_GetNotification following a prior call to IRPCAsyncNotify_UnregisterClient
	// by using the same PRPCREMOTEOBJECT value.
	GetNotification(context.Context, *GetNotificationRequest) (*GetNotificationResponse, error)

	// The IRPCAsyncNotify_CloseChannel method sends a final response on the notification
	// channel and closes it. This method MUST NOT be used with unidirectional communication
	// mode.
	//
	// Return Values: This method MUST return zero or an HRESULT success value ([MS-ERREF]
	// section 2.1.1) to indicate success, or an HRESULT error value to indicate failure.
	//
	// Protocol-specific success values are defined in the following table.
	//
	//	+--------------+------------------------------------------+
	//	|    RETURN    |                                          |
	//	|    VALUE     |               DESCRIPTION                |
	//	|              |                                          |
	//	+--------------+------------------------------------------+
	//	+--------------+------------------------------------------+
	//	| 0x00040010   | Another client has acquired the channel. |
	//	+--------------+------------------------------------------+
	//
	// Protocol-specific error values are defined in the following table. The client MUST
	// consider all error return values fatal and report them to the higher-level caller.
	//
	//	+--------------+----------------------------------------------------------------------------------+
	//	|    RETURN    |                                                                                  |
	//	|    VALUE     |                                   DESCRIPTION                                    |
	//	|              |                                                                                  |
	//	+--------------+----------------------------------------------------------------------------------+
	//	+--------------+----------------------------------------------------------------------------------+
	//	| 0x80040012   | The response exceeds the maximum size allowed by the server.                     |
	//	+--------------+----------------------------------------------------------------------------------+
	//	| 0x80040014   | The notification type identifier is different from the notification type of the  |
	//	|              | notification channel.                                                            |
	//	+--------------+----------------------------------------------------------------------------------+
	//	| 0x8007000E   | The server does not have enough memory to complete the request.                  |
	//	+--------------+----------------------------------------------------------------------------------+
	//
	// Exceptions Thrown: No exceptions are thrown beyond those thrown by the underlying
	// RPC protocol [MS-RPCE].
	//
	// If a client call to IRPCAsyncNotify_GetNotificationSendResponse is blocked on the
	// server, waiting for a notification to become available on a notification channel,
	// then the server MUST process a client call to this method on the same notification
	// channel without waiting for a notification.
	//
	// A client MUST NOT call IRPCAsyncNotify_CloseChannel following a prior successful
	// return from IRPCAsyncNotify_GetNotificationSendResponse with a NULL value of pChannel
	// parameter or following a prior successful return from IRPCAsyncNotify_CloseChannel.<11>
	CloseChannel(context.Context, *CloseChannelRequest) (*CloseChannelResponse, error)
}

IRPCAsyncNotify server interface.

type NotificationType 

type NotificationType dtyp.GUID

NotificationType structure represents PrintAsyncNotificationType RPC structure.

func (*NotificationType) GUID 

func (o *NotificationType) GUID() *dtyp.GUID

func (*NotificationType) MarshalNDR 

func (o *NotificationType) MarshalNDR(ctx context.Context, w ndr.Writer) error

func (*NotificationType) UnmarshalNDR 

func (o *NotificationType) UnmarshalNDR(ctx context.Context, w ndr.Reader) error

type NotifyObject 

type NotifyObject dcetypes.ContextHandle

NotifyObject structure represents PNOTIFYOBJECT RPC structure.

func (*NotifyObject) ContextHandle 

func (o *NotifyObject) ContextHandle() *dcetypes.ContextHandle

func (*NotifyObject) MarshalNDR 

func (o *NotifyObject) MarshalNDR(ctx context.Context, w ndr.Writer) error

func (*NotifyObject) UnmarshalNDR 

func (o *NotifyObject) UnmarshalNDR(ctx context.Context, w ndr.Reader) error

type RegisterClientRequest 

type RegisterClientRequest struct {
	// pRegistrationObj: MUST be the remote object context handle that was returned by the
	// server in the ppRemoteObject output parameter of a prior call to IRPCRemoteObject_Create
	// (section 3.1.2.4.1). This value MUST NOT be NULL.
	RegistrationObject *irpcremoteobject.RemoteObject `idl:"name:pRegistrationObj" json:"registration_object"`
	// pName: MUST be NULL or a pointer to a NULL-terminated string, encoded in Unicode
	// UTF-16LE ([RFC2781] section 4.2), which specifies the full UNC name of the print
	// queue from which the print client is registering to receive notifications.
	//
	// This UNC name MUST be in the following format:
	//
	// SERVER_NAME is a DNS, NetBIOS, IPv4, or IPv6 host name.
	//
	// LOCAL_PRINTER_NAME is a string that MUST NOT contain the characters "\" or ",".
	//
	// DNS names are specified in [RFC819] section 2, and NetBIOS names are specified in
	// [RFC1001] section 14. Basic notational conventions are specified in [RFC2616] section
	// 2, and "host" is defined in [RFC3986] section 3.2.2.
	//
	// If pName is NULL, the registration MUST be made for the remote print server itself.
	Name string `idl:"name:pName;string;pointer:unique" json:"name"`
	// pInNotificationType: MUST be a pointer to a PrintAsyncNotificationType structure
	// that specifies the notification type identifier for the notifications that the client
	// is registering to receive.
	InNotificationType *NotificationType `idl:"name:pInNotificationType" json:"in_notification_type"`
	// NotifyFilter: MUST be a value of type PrintAsyncNotifyUserFilter that specifies whether
	// the client is registering to receive notifications that are issued to all registered
	// clients, irrespective of their authenticated user identity, or to receive notifications
	// that are issued only to the specific authenticated user identity of the registering
	// RPC client.
	NotifyFilter UserFilter `idl:"name:NotifyFilter" json:"notify_filter"`
	// conversationStyle: MUST be a value of type PrintAsyncNotifyConversationStyle that
	// specifies whether the client is registering for bidirectional communication mode
	// or unidirectional communication mode.
	ConversationStyle ConversationStyle `idl:"name:conversationStyle" json:"conversation_style"`
}

RegisterClientRequest structure represents the IRPCAsyncNotify_RegisterClient operation request

func (*RegisterClientRequest) MarshalNDR 

func (o *RegisterClientRequest) MarshalNDR(ctx context.Context, w ndr.Writer) error

func (*RegisterClientRequest) UnmarshalNDR 

func (o *RegisterClientRequest) UnmarshalNDR(ctx context.Context, r ndr.Reader) error

type RegisterClientResponse 

type RegisterClientResponse struct {
	// ppRmtServerReferral: Servers SHOULD return NULL for this parameter, and clients MUST
	// ignore it on receipt.
	RemoteServerReferral string `idl:"name:ppRmtServerReferral;string" json:"remote_server_referral"`
	// Return: The IRPCAsyncNotify_RegisterClient return value.
	Return int32 `idl:"name:Return" json:"return"`
}

RegisterClientResponse structure represents the IRPCAsyncNotify_RegisterClient operation response

func (*RegisterClientResponse) MarshalNDR 

func (o *RegisterClientResponse) MarshalNDR(ctx context.Context, w ndr.Writer) error

func (*RegisterClientResponse) UnmarshalNDR 

func (o *RegisterClientResponse) UnmarshalNDR(ctx context.Context, r ndr.Reader) error

type UnregisterClientRequest 

type UnregisterClientRequest struct {
	// pRegistrationObj: MUST be the remote object context handle that MUST have been successfully
	// registered by a prior call to IRPCAsyncNotify_RegisterClient. This value MUST NOT
	// be NULL.
	RegistrationObject *irpcremoteobject.RemoteObject `idl:"name:pRegistrationObj" json:"registration_object"`
}

UnregisterClientRequest structure represents the IRPCAsyncNotify_UnregisterClient operation request

func (*UnregisterClientRequest) MarshalNDR 

func (o *UnregisterClientRequest) MarshalNDR(ctx context.Context, w ndr.Writer) error

func (*UnregisterClientRequest) UnmarshalNDR 

func (o *UnregisterClientRequest) UnmarshalNDR(ctx context.Context, r ndr.Reader) error

type UnregisterClientResponse 

type UnregisterClientResponse struct {
	// Return: The IRPCAsyncNotify_UnregisterClient return value.
	Return int32 `idl:"name:Return" json:"return"`
}

UnregisterClientResponse structure represents the IRPCAsyncNotify_UnregisterClient operation response

func (*UnregisterClientResponse) MarshalNDR 

func (o *UnregisterClientResponse) MarshalNDR(ctx context.Context, w ndr.Writer) error

func (*UnregisterClientResponse) UnmarshalNDR 

func (o *UnregisterClientResponse) UnmarshalNDR(ctx context.Context, r ndr.Reader) error

type UserFilter 

type UserFilter uint32

UserFilter type represents PrintAsyncNotifyUserFilter RPC enumeration.

The PrintAsyncNotifyUserFilter enumeration is used by clients when they register to receive notifications from server-resident notification sources. The following types of notifications can be requested:

* Notifications intended specifically for a particular client's user identity.

* Notifications intended for all registered client user identities.

typedef [v1_enum] enum

{

kPerUser = 0,

kAllUsers = 1,

} PrintAsyncNotifyUserFilter; 

var (
	// kPerUser:  Indicates that the client is requesting notifications that are intended
	// specifically for its own user identity and notifications that are intended for all
	// registered user identities.
	UserFilterPerUser UserFilter = 0
	// kAllUsers:  Indicates that the client is requesting every notification, whether
	// intended for a specific user identity or for all registered user identities.
	UserFilterAllUsers UserFilter = 1
)

func (UserFilter) String 

func (o UserFilter) String() string

Source Files

View all Source files

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL
go.dev uses cookies from Google to deliver and enhance the quality of its services and to analyze traffic. Learn more.