Documentation
¶
Index ¶
- Variables
- func DscommServerHandle(ctx context.Context, o DscommServer, opNum int, r ndr.Reader) (dcerpc.Operation, error)
- func NewDscommServerHandle(o DscommServer) dcerpc.ServerHandle
- func RegisterDscommServer(conn dcerpc.Conn, o DscommServer, opts ...dcerpc.Option)
- type CloseServerRequest
- type CloseServerResponse
- type CreateObjectRequest
- type CreateObjectResponse
- type CreateServersCacheRequest
- type CreateServersCacheResponse
- type DeleteObjectGUIDRequest
- type DeleteObjectGUIDResponse
- type DeleteObjectRequest
- type DeleteObjectResponse
- type DeleteType
- type DscommClient
- type DscommServer
- type GetObjectSecurityGUIDRequest
- type GetObjectSecurityGUIDResponse
- type GetObjectSecurityRequest
- type GetObjectSecurityResponse
- type GetPropertiesGUIDRequest
- type GetPropertiesGUIDResponse
- type GetPropertiesRequest
- type GetPropertiesResponse
- type GetServerPortRequest
- type GetServerPortResponse
- type InitSecurityContextRequest
- type InitSecurityContextResponse
- type LookupBeginRequest
- type LookupBeginResponse
- type LookupEndRequest
- type LookupEndResponse
- type LookupNextRequest
- type LookupNextResponse
- type QMGetObjectSecurityChallengeResponseProcRequest
- type QMGetObjectSecurityChallengeResponseProcResponse
- type QMGetObjectSecurityRequest
- type QMGetObjectSecurityResponse
- type QMSetMachinePropertiesRequest
- type QMSetMachinePropertiesResponse
- type QMSetMachinePropertiesSignProcRequest
- type QMSetMachinePropertiesSignProcResponse
- type ServerAuthType
- type SetObjectSecurityGUIDRequest
- type SetObjectSecurityGUIDResponse
- type SetObjectSecurityRequest
- type SetObjectSecurityResponse
- type SetPropertiesGUIDRequest
- type SetPropertiesGUIDResponse
- type SetPropertiesRequest
- type SetPropertiesResponse
- type Type
- type ValidateServerRequest
- type ValidateServerResponse
Constants ¶
This section is empty.
Variables ¶
View Source
var ( // Syntax UUID DscommSyntaxUUID = &uuid.UUID{TimeLow: 0x77df7a80, TimeMid: 0xf298, TimeHiAndVersion: 0x11d0, ClockSeqHiAndReserved: 0x83, ClockSeqLow: 0x58, Node: [6]uint8{0x0, 0xa0, 0x24, 0xc4, 0x80, 0xa8}} // Syntax ID DscommSyntaxV1_0 = &dcerpc.SyntaxID{IfUUID: DscommSyntaxUUID, IfVersionMajor: 1, IfVersionMinor: 0} )
View Source
var (
// import guard
GoPackage = "mqds"
)
Functions ¶
func DscommServerHandle ¶
func NewDscommServerHandle ¶
func NewDscommServerHandle(o DscommServer) dcerpc.ServerHandle
func RegisterDscommServer ¶
func RegisterDscommServer(conn dcerpc.Conn, o DscommServer, opts ...dcerpc.Option)
Types ¶
type CloseServerRequest ¶
type CloseServerRequest struct {
// pphServerAuth: The PCONTEXT_HANDLE_SERVER_AUTH_TYPE RPC context handle to close.
// It MUST have been acquired from the pphServerAuth parameter in a previous call to
// S_DSValidateServer, and MUST NOT have been closed through a previous call to S_DSCloseServerHandle.
// The server MUST set this parameter to NULL.
ServerAuth *ServerAuthType `idl:"name:pphServerAuth" json:"server_auth"`
}
CloseServerRequest structure represents the S_DSCloseServerHandle operation request
func (*CloseServerRequest) MarshalNDR ¶
func (*CloseServerRequest) UnmarshalNDR ¶
type CloseServerResponse ¶
type CloseServerResponse struct {
// pphServerAuth: The PCONTEXT_HANDLE_SERVER_AUTH_TYPE RPC context handle to close.
// It MUST have been acquired from the pphServerAuth parameter in a previous call to
// S_DSValidateServer, and MUST NOT have been closed through a previous call to S_DSCloseServerHandle.
// The server MUST set this parameter to NULL.
ServerAuth *ServerAuthType `idl:"name:pphServerAuth" json:"server_auth"`
// Return: The S_DSCloseServerHandle return value.
Return int32 `idl:"name:Return" json:"return"`
}
CloseServerResponse structure represents the S_DSCloseServerHandle operation response
func (*CloseServerResponse) MarshalNDR ¶
func (*CloseServerResponse) UnmarshalNDR ¶
type CreateObjectRequest ¶
type CreateObjectRequest struct {
// dwObjectType: Specifies the type of directory object to create. MUST be set to
// one of the object types, as specified in section 2.2.8.
ObjectType uint32 `idl:"name:dwObjectType" json:"object_type"`
// pwcsPathName: Pointer to a NULL-terminated 16-bit Unicode string that MUST contain
// the directory service pathname, as specified in section 2.2.9 for the object to be
// created in the directory service. If the object is of a type that is not referenced
// by pathname, as specified in section 2.2.9, this pointer MUST be NULL.
PathName string `idl:"name:pwcsPathName;string;pointer:unique" json:"path_name"`
// dwSDLength: MUST contain the size in bytes of the buffer pointed to by SecurityDescriptor.
SecurityDescriptorLength uint32 `idl:"name:dwSDLength" json:"security_descriptor_length"`
// SecurityDescriptor: MUST contain a pointer to a security descriptor, as specified
// in [MS-DTYP] section 2.4.6, or NULL.
SecurityDescriptor []byte `idl:"name:SecurityDescriptor;size_is:(dwSDLength);pointer:unique" json:"security_descriptor"`
// cp: MUST be set to the size (in elements) of the arrays aProp and apVar. The arrays
// aProp and apVar MUST have an identical number of elements and MUST contain at least
// one element.
CreatePartition uint32 `idl:"name:cp" json:"create_partition"`
// aProp: An array of property identifiers of properties to associate with the created
// object. Each element MUST specify a value from the property identifiers table as
// specified in section 2.2.10.1, for the directory object type specified in dwObjectType.
// Each element MUST specify the property identifier for the corresponding property
// value at the same element index in apVar. The array MUST contain at least one element.
Property []uint32 `idl:"name:aProp;size_is:(cp)" json:"property"`
// apVar: An array of property values to associate with the created object. Each element
// MUST specify the property value for the corresponding property identifier at the
// same element index in aProp. The array MUST contain at least one element.
Var []*mqmq.PropertyVariant `idl:"name:apVar;size_is:(cp)" json:"var"`
// pObjGuid: SHOULD be set by the server to the GUID of the created object if the dwObjectType
// is equal to MQDS_QUEUE, MQDS_ROUTINGLINK, or MQDS_MACHINE.<19>
ObjectGUID *dtyp.GUID `idl:"name:pObjGuid;pointer:unique" json:"object_guid"`
}
CreateObjectRequest structure represents the S_DSCreateObject operation request
func (*CreateObjectRequest) MarshalNDR ¶
func (*CreateObjectRequest) UnmarshalNDR ¶
type CreateObjectResponse ¶
type CreateObjectResponse struct {
// pObjGuid: SHOULD be set by the server to the GUID of the created object if the dwObjectType
// is equal to MQDS_QUEUE, MQDS_ROUTINGLINK, or MQDS_MACHINE.<19>
ObjectGUID *dtyp.GUID `idl:"name:pObjGuid;pointer:unique" json:"object_guid"`
// Return: The S_DSCreateObject return value.
Return int32 `idl:"name:Return" json:"return"`
}
CreateObjectResponse structure represents the S_DSCreateObject operation response
func (*CreateObjectResponse) MarshalNDR ¶
func (*CreateObjectResponse) UnmarshalNDR ¶
type CreateServersCacheRequest ¶
type CreateServersCacheRequest struct {
// pdwIndex: Pointer to an unsigned long that contains an index into the configured
// list of sites in the enterprise indicating the site to which the list of BSCs is
// to be returned.
Index uint32 `idl:"name:pdwIndex" json:"index"`
// lplpSiteServers: Pointer to a pointer to a string that contains the list of servers
// associated with the indexed site. The string MUST be in Server List String (section
// 2.2.17) format.
SiteServers string `idl:"name:lplpSiteServers;string;pointer:ptr" json:"site_servers"`
// phServerAuth: PCONTEXT_HANDLE_SERVER_AUTH_TYPE RPC context handle acquired from the
// pphServerAuth parameter in a previous call to S_DSValidateServer. The server MUST
// use this parameter as a key to locate the GSS security context used to compute the
// signature returned in pbServerSignature. See section 3.1.4.2.
ServerAuth *ServerAuthType `idl:"name:phServerAuth" json:"server_auth"`
// pdwServerSignatureSize: MUST be set by the client to point to an unsigned LONG
// that contains the maximum length in bytes of the server signature to return. MUST
// be set by the server to the actual length in bytes of the server signature on output.
// If the server signature is larger than the supplied buffer, the server MUST return
// MQ_ERROR_USER_BUFFER_TOO_SMALL (0xC00E0028).
ServerSignatureSize uint32 `idl:"name:pdwServerSignatureSize" json:"server_signature_size"`
}
CreateServersCacheRequest structure represents the S_DSCreateServersCache operation request
func (*CreateServersCacheRequest) MarshalNDR ¶
func (*CreateServersCacheRequest) UnmarshalNDR ¶
type CreateServersCacheResponse ¶
type CreateServersCacheResponse struct {
// pdwIndex: Pointer to an unsigned long that contains an index into the configured
// list of sites in the enterprise indicating the site to which the list of BSCs is
// to be returned.
Index uint32 `idl:"name:pdwIndex" json:"index"`
// lplpSiteServers: Pointer to a pointer to a string that contains the list of servers
// associated with the indexed site. The string MUST be in Server List String (section
// 2.2.17) format.
SiteServers string `idl:"name:lplpSiteServers;string;pointer:ptr" json:"site_servers"`
// pbServerSignature: MUST be set by the server to a buffer that contains a signed
// hash over the server list returned in lplpSiteServers. The server MUST construct
// this signature by creating a hash by using the MD5 algorithm (as specified in [RFC1321])
// and sealing it, as specified by the following pseudocode.
ServerSignature []byte `idl:"name:pbServerSignature;size_is:(pdwServerSignatureSize)" json:"server_signature"`
// pdwServerSignatureSize: MUST be set by the client to point to an unsigned LONG
// that contains the maximum length in bytes of the server signature to return. MUST
// be set by the server to the actual length in bytes of the server signature on output.
// If the server signature is larger than the supplied buffer, the server MUST return
// MQ_ERROR_USER_BUFFER_TOO_SMALL (0xC00E0028).
ServerSignatureSize uint32 `idl:"name:pdwServerSignatureSize" json:"server_signature_size"`
// Return: The S_DSCreateServersCache return value.
Return int32 `idl:"name:Return" json:"return"`
}
CreateServersCacheResponse structure represents the S_DSCreateServersCache operation response
func (*CreateServersCacheResponse) MarshalNDR ¶
func (*CreateServersCacheResponse) UnmarshalNDR ¶
type DeleteObjectGUIDRequest ¶
type DeleteObjectGUIDRequest struct {
// dwObjectType: Specifies the type of object to delete. MUST be set to one of the
// object types specified in section 2.2.8.
ObjectType uint32 `idl:"name:dwObjectType" json:"object_type"`
// pGuid: A pointer to the GUID of the object to delete. This MUST be the identifier
// assigned to the object by the server when the object was created. See section 3.1.4.1.
GUID *dtyp.GUID `idl:"name:pGuid" json:"guid"`
}
DeleteObjectGUIDRequest structure represents the S_DSDeleteObjectGuid operation request
func (*DeleteObjectGUIDRequest) MarshalNDR ¶
func (*DeleteObjectGUIDRequest) UnmarshalNDR ¶
type DeleteObjectGUIDResponse ¶
type DeleteObjectGUIDResponse struct {
// Return: The S_DSDeleteObjectGuid return value.
Return int32 `idl:"name:Return" json:"return"`
}
DeleteObjectGUIDResponse structure represents the S_DSDeleteObjectGuid operation response
func (*DeleteObjectGUIDResponse) MarshalNDR ¶
func (*DeleteObjectGUIDResponse) UnmarshalNDR ¶
type DeleteObjectRequest ¶
type DeleteObjectRequest struct {
// dwObjectType: Specifies the type of object to delete. MUST be set to one of the
// directory object types specified in section 2.2.8.
ObjectType uint32 `idl:"name:dwObjectType" json:"object_type"`
// pwcsPathName: Pointer to a NULL-terminated 16-bit Unicode string that MUST contain
// the directory service pathname, as specified in section 2.2.9, to the object in the
// directory service.
PathName string `idl:"name:pwcsPathName;string" json:"path_name"`
}
DeleteObjectRequest structure represents the S_DSDeleteObject operation request
func (*DeleteObjectRequest) MarshalNDR ¶
func (*DeleteObjectRequest) UnmarshalNDR ¶
type DeleteObjectResponse ¶
type DeleteObjectResponse struct {
// Return: The S_DSDeleteObject return value.
Return int32 `idl:"name:Return" json:"return"`
}
DeleteObjectResponse structure represents the S_DSDeleteObject operation response
func (*DeleteObjectResponse) MarshalNDR ¶
func (*DeleteObjectResponse) UnmarshalNDR ¶
type DeleteType ¶
type DeleteType dcetypes.ContextHandle
DeleteType structure represents PCONTEXT_HANDLE_DELETE_TYPE RPC structure.
func (*DeleteType) ContextHandle ¶
func (o *DeleteType) ContextHandle() *dcetypes.ContextHandle
func (*DeleteType) MarshalNDR ¶
func (*DeleteType) UnmarshalNDR ¶
type DscommClient ¶
type DscommClient interface {
// This method creates a new directory object, assigns the specified properties and
// security descriptor to that directory object, and returns a unique GUID identifier
// for that directory object.
//
// Return Values: If the method succeeds, the return value is 0. If the method fails,
// the return value is an implementation-specific error code.
//
// MQ_OK (0x00000000)
//
// MQ_ERROR_ILLEGAL_PROPERTY_VALUE (0xC00E0018)
//
// MQ_ERROR_ILLEGAL_ENTERPRISE_OPERATION (0xC00E0071)
//
// MQ_ERROR (0xC00E0001)
//
// MQ_ERROR_DS_ERROR (0xC00E0043)
//
// MQDS_OBJECT_NOT_FOUND (0xC00E050F)
//
// E_ADS_PROPERTY_NOT_FOUND (0x8000500D)
//
// Exceptions Thrown: No exceptions are thrown beyond those thrown by the underlying
// RPC protocol, as specified in [MS-RPCE].
CreateObject(context.Context, *CreateObjectRequest, ...dcerpc.CallOption) (*CreateObjectResponse, error)
// This method deletes a directory object specified by a directory service pathname.
//
// Return Values: If the method succeeds, the return value is 0. If the method fails,
// the return value is an implementation-specific error code.
//
// MQ_OK (0x00000000)
//
// MQ_ERROR_INVALID_PARAMETER (0xC00E0006)
//
// Exceptions Thrown: No exceptions are thrown beyond those thrown by the underlying
// RPC protocol, as specified in [MS-RPCE].
//
// The server SHOULD enforce appropriate security measures to make sure that the caller
// has the required permissions to execute this routine. If the server enforces security
// measures, and the caller does not have the required credentials, the server MUST
// return an error.
DeleteObject(context.Context, *DeleteObjectRequest, ...dcerpc.CallOption) (*DeleteObjectResponse, error)
// This method returns the properties associated with a directory object specified by
// a directory service pathname.
//
// Return Values: On success, this method MUST return MQ_OK (0x00000000); otherwise,
// the server MUST return a failure HRESULT. Additionally, if a failure HRESULT is returned,
// the client MUST disregard all out-parameter values.
//
// MQ_OK (0x00000000)
//
// MQ_ERROR_USER_BUFFER_TOO_SMALL (0xC00E0028)
//
// MQ_ERROR_INVALID_PARAMETER (0xC00E0006)
//
// MQ_ERROR_ILLEGAL_PROPID (0xC00E0039)
//
// MQ_ERROR (0xC00E0001)
//
// MQ_ERROR_DS_ERROR (0xC00E0043)
//
// MQDS_OBJECT_NOT_FOUND (0xC00E050F)
//
// E_ADS_PROPERTY_NOT_FOUND (0x8000500D)
//
// Exceptions Thrown: No exceptions are thrown beyond those thrown by the underlying
// RPC protocol, as specified in [MS-RPCE].
GetProperties(context.Context, *GetPropertiesRequest, ...dcerpc.CallOption) (*GetPropertiesResponse, error)
// This method sets the specified properties for a directory object specified by a directory
// service pathname.
//
// Return Values: If the method succeeds, the return value is 0. If the method fails,
// the return value is an implementation-specific error code.
//
// MQ_OK (0x00000000)
//
// MQ_ERROR_ILLEGAL_PROPID (0xC00E0039)
//
// MQ_ERROR (0xC00E0001)
//
// MQ_ERROR_DS_ERROR (0xC00E0043)
//
// MQDS_OBJECT_NOT_FOUND (0xC00E050F)
//
// E_ADS_PROPERTY_NOT_FOUND (0x8000500D)
//
// Exceptions Thrown: No exceptions are thrown beyond those thrown by the underlying
// RPC protocol, as specified in [MS-RPCE].
SetProperties(context.Context, *SetPropertiesRequest, ...dcerpc.CallOption) (*SetPropertiesResponse, error)
// This method gets security properties for a directory object specified by a directory
// service pathname.
//
// Return Values: If the method succeeds, the return value is 0. If the method fails,
// the return value is an implementation-specific error code.
//
// MQ_OK (0x00000000)
//
// MQ_ERROR_USER_BUFFER_TOO_SMALL (0xC00E0028)
//
// MQ_ERROR_SECURITY_DESCRIPTOR_TOO_SMALL (0xC00E0023)
//
// MQDS_WRONG_OBJ_TYPE (0xC00E0506)
//
// MQ_ERROR_INVALID_PARAMETER (0xC00E0006)
//
// Exceptions Thrown: No exceptions are thrown beyond those thrown by the underlying
// RPC protocol, as specified in [MS-RPCE].
GetObjectSecurity(context.Context, *GetObjectSecurityRequest, ...dcerpc.CallOption) (*GetObjectSecurityResponse, error)
// This method sets security properties for a directory object specified by a directory
// service pathname.
//
// Return Values: If the method succeeds, the return value is 0x00000000. If the method
// fails, the return value is an implementation-specific error code.
//
// MQ_OK (0x00000000)
//
// Exceptions Thrown: No exceptions are thrown beyond those thrown by the underlying
// RPC extension protocol, as specified in [MS-RPCE].
SetObjectSecurity(context.Context, *SetObjectSecurityRequest, ...dcerpc.CallOption) (*SetObjectSecurityResponse, error)
// This method performs a query over the directory objects and returns an RPC context
// handle that can be used to retrieve the result set through a subsequent series of
// calls to S_DSLookupNext (section 3.1.4.18). When the client has no further use of
// the RPC context handle returned from this method, the client can close the context
// handle through a call to S_DSLookupEnd (section 3.1.4.19).
//
// Return Values: If the method succeeds, the return value is 0. If the method fails,
// the return value is an implementation-specific error code.
//
// MQ_OK (0x00000000)
//
// Exceptions Thrown: No exceptions are thrown beyond those thrown by the underlying
// RPC extension protocol, as specified in [MS-RPCE].
LookupBegin(context.Context, *LookupBeginRequest, ...dcerpc.CallOption) (*LookupBeginResponse, error)
// This method returns a portion of the data from the result set computed in a previous
// call to S_DSLookupBegin (section 3.1.4.17) and updates the cursor index to the first
// directory object that has not yet been returned to the client.
//
// Return Values: If the method succeeds, the return value is 0. If the method fails,
// the return value is an implementation-specific error code.
//
// MQ_OK (0x00000000)
//
// MQ_ERROR_USER_BUFFER_TOO_SMALL (0xC00E0028)
//
// Exceptions Thrown: No exceptions are thrown beyond those thrown by the underlying
// RPC extension protocol, as specified in [MS-RPCE].
LookupNext(context.Context, *LookupNextRequest, ...dcerpc.CallOption) (*LookupNextResponse, error)
// This method closes an opened RPC context handle created from a previous call to S_DSLookupBegin
// (section 3.1.4.17).
//
// Return Values: If the method succeeds, the return value is 0. If the method fails,
// the return value is an implementation-specific error code.
//
// MQ_OK (0x00000000)
//
// Exceptions Thrown: No exceptions are thrown beyond those thrown by the underlying
// RPC extension protocol, as specified in [MS-RPCE].
LookupEnd(context.Context, *LookupEndRequest, ...dcerpc.CallOption) (*LookupEndResponse, error)
// This method deletes a directory object specified by an object identifier.
//
// Return Values: If the method succeeds, the return value is 0. If the method fails,
// the return value is an implementation-specific error code.
//
// MQ_OK (0x00000000)
//
// MQ_ERROR_INVALID_PARAMETER (0xC00E0006)
//
// Exceptions Thrown: No exceptions are thrown beyond those thrown by the underlying
// RPC protocol, as specified in [MS-RPCE].
//
// The server SHOULD enforce appropriate security measures to make sure that the caller
// has the required permissions to execute this routine. If the server enforces security
// measures, and the caller does not have the required credentials, the server MUST
// return an error.
DeleteObjectGUID(context.Context, *DeleteObjectGUIDRequest, ...dcerpc.CallOption) (*DeleteObjectGUIDResponse, error)
// This method returns properties associated with a directory object specified by an
// object identifier.
//
// Return Values: On success, this method MUST return MQ_OK (0x00000000); otherwise,
// the server MUST return a failure HRESULT. Additionally, if a failure HRESULT is returned,
// the client MUST disregard all out-parameter values.
//
// MQ_OK (0x00000000)
//
// MQ_ERROR_USER_BUFFER_TOO_SMALL (0xC00E0028)
//
// MQ_ERROR_INVALID_PARAMETER (0xC00E0006)
//
// MQ_ERROR_ILLEGAL_PROPID (0xC00E0039)
//
// MQ_ERROR (0xC00E0001)
//
// MQ_ERROR_DS_ERROR (0xC00E0043)
//
// MQDS_OBJECT_NOT_FOUND (0xC00E050F)
//
// E_ADS_PROPERTY_NOT_FOUND (0x8000500D)
//
// Exceptions Thrown: No exceptions are thrown beyond those thrown by the underlying
// RPC protocol, as specified in [MS-RPCE].
GetPropertiesGUID(context.Context, *GetPropertiesGUIDRequest, ...dcerpc.CallOption) (*GetPropertiesGUIDResponse, error)
// This method sets properties for a directory object specified by an object identifier.
//
// Return Values: If the method succeeds, the return value is 0. If the method fails,
// the return value is an implementation-specific error code.
//
// MQ_OK (0x00000000)
//
// MQ_ERROR_ILLEGAL_PROPID (0xC00E0039)
//
// MQ_ERROR (0xC00E0001)
//
// MQ_ERROR_DS_ERROR (0xC00E0043)
//
// MQDS_OBJECT_NOT_FOUND (0xC00E050F)
//
// E_ADS_PROPERTY_NOT_FOUND (0x8000500D)
//
// Exceptions Thrown: No exceptions are thrown beyond those thrown by the underlying
// RPC protocol, as specified in [MS-RPCE].
SetPropertiesGUID(context.Context, *SetPropertiesGUIDRequest, ...dcerpc.CallOption) (*SetPropertiesGUIDResponse, error)
// This method retrieves the security descriptor for a directory object specified by
// an object identifier.
//
// Return Values: If the method succeeds, the return value is 0. If the method fails,
// the return value is an implementation-specific error code.
//
// MQ_OK (0x00000000)
//
// MQ_ERROR_SECURITY_DESCRIPTOR_TOO_SMALL (0xC00E0023)
//
// MQ_ERROR_USER_BUFFER_TOO_SMALL (0xC00E0028)
//
// Exceptions Thrown: No exceptions are thrown beyond those thrown by the underlying
// RPC extension protocol, as specified in [MS-RPCE].
GetObjectSecurityGUID(context.Context, *GetObjectSecurityGUIDRequest, ...dcerpc.CallOption) (*GetObjectSecurityGUIDResponse, error)
// This method sets security properties for a directory object specified by an object
// identifier.
//
// Return Values: If the method succeeds, the return value is 0x00000000. If the method
// fails, the return value is an implementation-specific error code.
//
// MQ_OK (0x00000000)
//
// Exceptions Thrown: No exceptions are thrown beyond those thrown by the underlying
// RPC protocol extension, as specified in [MS-RPCE].
SetObjectSecurityGUID(context.Context, *SetObjectSecurityGUIDRequest, ...dcerpc.CallOption) (*SetObjectSecurityGUIDResponse, error)
// This method sets properties associated with a machine object specified by a directory
// service pathname. This method is intended for use by a queue manager to manipulate
// its own directory service object of type MQDS_MACHINE. Client applications SHOULD
// NOT use this method.<76>
//
// Return Values: If the method succeeds, the return value is 0. If the method fails,
// the return value is an implementation-specific error code.
//
// MQ_OK (0x00000000)
//
// MQ_ERROR_ILLEGAL_PROPID (0xC00E0039)
//
// MQ_ERROR (0xC00E0001)
//
// MQ_ERROR_DS_ERROR (0xC00E0043)
//
// MQDS_OBJECT_NOT_FOUND (0xC00E050F)
//
// E_ADS_PROPERTY_NOT_FOUND (0x8000500D)
//
// Exceptions Thrown: No exceptions are thrown beyond those thrown by the underlying
// RPC extension protocol, as specified in [MS-RPCE].
QMSetMachineProperties(context.Context, *QMSetMachinePropertiesRequest, ...dcerpc.CallOption) (*QMSetMachinePropertiesResponse, error)
// This method returns a list of Backup Site Controllers (BSCs) associated with a specified
// site. The client calls this method to enumerate the BSCs associated with sites in
// the configured list of sites in the enterprise.
//
// Return Values: If the method succeeds, the return value is 0. If the method fails,
// the return value is an implementation-specific error code. The server MUST return
// MQDS_E_NO_MORE_DATA (0xC00E0523), if pdwIndex is an invalid index, into the configured
// list of sites in the enterprise.
//
// MQ_OK (0x00000000)
//
// MQDS_E_NO_MORE_DATA (0xC00E0523)
//
// MQ_ERROR_USER_BUFFER_TOO_SMALL (0xC00E0028)
//
// Exceptions Thrown: No exceptions are thrown beyond those thrown by the underlying
// RPC extension protocol, as specified in [MS-RPCE].
//
// The S_DSCreateServersCache method returns information on Backup Site Controllers
// (BSCs) associated with sites in the enterprise. The client uses this method to iterate
// through the list of sites in the enterprise by calling the method repeatedly. Before
// the first invocation, the client sets the pdwIndex parameter to 0. After each successful
// invocation, the client increments the pdwIndex parameter by 1 and calls the method
// again. The client repeats this sequence until the method call returns an error.
CreateServersCache(context.Context, *CreateServersCacheRequest, ...dcerpc.CallOption) (*CreateServersCacheResponse, error)
// This method is a callback method called by the server during a client call to S_DSQMSetMachineProperties.
// Through this method, the server provides a challenge that the client must sign to
// authenticate itself.
//
// Return Values: This method is obsolete. The server SHOULD NOT call this method,
// and the client SHOULD return MQ_ERROR_NOT_SUPPORTED (0xC00E03EB).<146> If the method
// succeeds, the return value is 0. If the method fails, the return value is an implementation-specific
// error code.
//
// ERROR_SUCCESS (0x00000000)
//
// MQ_ERROR_NOT_SUPPORTED (0xC00E03EB)
//
// Exceptions Thrown: No exceptions are thrown beyond those thrown by the underlying
// RPC extension protocol, as specified in [MS-RPCE].
QMSetMachinePropertiesSignProc(context.Context, *QMSetMachinePropertiesSignProcRequest, ...dcerpc.CallOption) (*QMSetMachinePropertiesSignProcResponse, error)
// This method retrieves the security descriptor for a directory object specified by
// an object identifier.
//
// Return Values: If the method succeeds, the return value is 0x00000000. If the method
// fails, the return value is an implementation-specific error code.
//
// MQ_OK (0x00000000)
//
// MQ_ERROR_SECURITY_DESCRIPTOR_TOO_SMALL (0xC00E0023)
//
// MQ_ERROR_USER_BUFFER_TOO_SMALL (0xC00E0028)
//
// Exceptions Thrown: No exceptions are thrown beyond those thrown by the underlying
// RPC extension protocol, as specified in [MS-RPCE].
QMGetObjectSecurity(context.Context, *QMGetObjectSecurityRequest, ...dcerpc.CallOption) (*QMGetObjectSecurityResponse, error)
// S_DSQMGetObjectSecurityChallengeResponceProc is a callback method called by the server
// during a client call to S_DSQMGetObjectSecurity. Through this method, the server
// provides a challenge that the client must sign to authenticate itself.
//
// Return Values: This method is obsolete. The server SHOULD NOT call this method,
// and the client SHOULD return MQ_ERROR_NOT_SUPPORTED (0xC00E03EB).<147> If the method
// succeeds, the return value is 0. If the method fails, the return value is an implementation-specific
// error code.
//
// ERROR_SUCCESS (0x00000000)
//
// MQ_ERROR_NOT_SUPPORTED (0xC00E03EB)
//
// Exceptions Thrown: No exceptions are thrown beyond those thrown by the underlying
// RPC protocol extension, as specified in [MS-RPCE].
QMGetObjectSecurityChallengeResponseProc(context.Context, *QMGetObjectSecurityChallengeResponseProcRequest, ...dcerpc.CallOption) (*QMGetObjectSecurityChallengeResponseProcResponse, error)
// This method is a callback method called by the server during a client call to S_DSValidateServer.
// These two methods are used to tunnel a GSS (as specified in [RFC2743]) security negotiation
// to provide mutual authentication between the client and server.
//
// Return Values: If the method succeeds, and the negotiation is complete, the return
// value is 0. If the method succeeds, and the negotiation is not complete, the return
// value is SEC_I_CONTINUE_NEEDED (0x00090312). If the method fails, the return value
// is an implementation-specific error code.
//
// ERROR_SUCCESS (0x00000000)
//
// SEC_I_CONTINUE_NEEDED (0x00090312)
//
// Exceptions Thrown: No exceptions are thrown beyond those thrown by the underlying
// RPC extension protocol, as specified in [MS-RPCE].
//
// The caller MUST supply an input_token in pServerBuff computed through a call to GSS_Accept_sec_context.
// The receiver MUST process this input_token through a call to GSS_Init_sec_context,
// generating an output_token that MUST be returned in pServerBuff.
//
// If GSS_Init_sec_context returns GSS_S_CONTINUE_NEEDED, this is a signal that the
// negotiation is not complete. The receiver MUST return SEC_I_CONTINUE_NEEDED (0x00090312).
//
// If GSS_Init_sec_context returns GSS_S_COMPLETE, the negotiation is complete. The
// receiver MUST save the output context handle in the GSS security context state associated
// with the dwContext parameter. The receiver MUST return SEC_E_OK (0x00000000).
InitSecurityContext(context.Context, *InitSecurityContextRequest, ...dcerpc.CallOption) (*InitSecurityContextResponse, error)
// This method performs mutual authentication between the client and server, and establishes
// a security context, as specified in [RFC2743]. The server uses the security context
// to construct a digital signature in subsequent method calls of this protocol, and
// the client uses the security context to validate the digital signature. The digital
// signature is used in methods that return data to the client. It allows the client
// to authenticate the source of the data and ensures that it has not been tampered
// with en route from the server to the client.
//
// When the client has no further use of the RPC context handle returned from this method,
// it releases the handle through a subsequent call to S_DSCloseServerHandle (section
// 3.1.4.3).
//
// Return Values: If the method succeeds, the return value is 0. If the method fails,
// the return value is an implementation-specific error code.
//
// MQ_OK (0x00000000)
//
// MQ_ERROR_DS_ERROR (0xC00E0043)
//
// MQDS_E_CANT_INIT_SERVER_AUTH (0xC00E052B)
//
// Exceptions Thrown: No exceptions are thrown beyond those thrown by the underlying
// RPC protocol as specified in [MS-RPCE].
//
// If the dwClientBuffSize parameter is zero, the server MUST initialize an empty security
// context in the security context table associated with the pphServerAuth parameter
// and MUST NOT invoke client callback methods. In addition, all signature parameters
// in other methods in this protocol that return server signatures MUST be set to all
// zeros.
//
// If the dwClientBuffSize parameter is nonzero, the server MUST construct a valid non-empty
// security context in the security context table associated with the pphServerAuth
// parameter.
//
// The client MUST supply an input_token in the pClientBuff parameter, acquired through
// an initial call to GSS_Init_sec_context, as specified in [RFC2743] section 2.2.1.
// The server MUST perform the following processing.
//
// *
//
// Let inputToken point to an input_token initialized to the pClientBuff parameter.
//
// *
//
// Call *GSS_Accept_sec_context* , as specified in [RFC2743] section 2.2.2, with the
// input_token contained in inputToken and a NULL input_context_handle.
//
// *
//
// If *GSS_Accept_sec_context* returns GSS_S_COMPLETE, the negotiation is complete.
// The server MUST allocate a PCONTEXT_HANDLE_SERVER_AUTH_TYPE RPC context handle and
// MUST allocate a security context entry in the security table keyed by the context
// handle. The server MUST associate the GSS security context (output_context_handle
// from the GSSAPI call) with the security context entry. The server MUST return the
// RPC context handle in the pphServerAuth parameter and return MQ_OK.
//
// *
//
// If *GSS_Accept_sec_context* returns GSS_S_CONTINUE_NEEDED, the server MUST issue
// a callback to the client through the S_InitSecCtx (section 3.2.4.3) method with the
// dwContext parameter set to the value supplied by the client in the dwContext parameter
// and the pServerBuff parameter set to the output_token returned from *GSS_Accept_sec_context*.
// When the callback to S_InitSecCtx returns, the server MUST set inputToken to the
// pClientBuff parameter returned by S_InitSecCtx and MUST continue at step 2.
//
// *
//
// If *GSS_Accept_sec_context* returns any other value, the server MUST take no further
// action and return a failure HRESULT ( ../ms-dtyp/a9046ed2-bfb2-4d56-a719-2824afce59ac
// ).
//
// The GSS security context is used by the server in subsequent calls to GSSWrap, as
// specified in [RFC2743] section 2.3.3.
//
// On successful return, the client MUST retrieve the GSS security context associated
// with the dwContext parameter and MUST associate it with the PCONTEXT_HANDLE_SERVER_AUTH_TYPE
// RPC context handle returned in the pphServerAuth parameter. The GSS security context
// will be used by the client in subsequent calls to GSSUnwrap, as specified in [RFC2743]
// section 2.3.4.
ValidateServer(context.Context, *ValidateServerRequest, ...dcerpc.CallOption) (*ValidateServerResponse, error)
// This method closes the RPC context handle returned by a previous call to S_DSValidateServer.
// The server releases resources associated with the RPC context handle.
//
// Return Values: If the method succeeds, the return value is 0. If the method fails,
// the return value is an implementation-specific error code.
//
// MQ_OK (0x00000000)
//
// Exceptions Thrown: No exceptions are thrown beyond those thrown by the underlying
// RPC protocol as specified in [MS-RPCE].
CloseServer(context.Context, *CloseServerRequest, ...dcerpc.CallOption) (*CloseServerResponse, error)
// This method returns the RPC endpoint port for a transport protocol. The client establishes
// a new binding to the server by using the returned port number.
//
// Return Values: If the method succeeds, the return value is the RPC endpoint port
// number. If the method fails, the server MUST return 0.
//
// MQ_OK (0x00000000)
//
// Exceptions Thrown: No exceptions are thrown beyond those thrown by the underlying
// RPC protocol as specified in [MS-RPCE].
GetServerPort(context.Context, *GetServerPortRequest, ...dcerpc.CallOption) (*GetServerPortResponse, error)
// AlterContext alters the client context.
AlterContext(context.Context, ...dcerpc.Option) error
}
dscomm interface.
func NewDscommClient ¶
type DscommServer ¶
type DscommServer interface {
// This method creates a new directory object, assigns the specified properties and
// security descriptor to that directory object, and returns a unique GUID identifier
// for that directory object.
//
// Return Values: If the method succeeds, the return value is 0. If the method fails,
// the return value is an implementation-specific error code.
//
// MQ_OK (0x00000000)
//
// MQ_ERROR_ILLEGAL_PROPERTY_VALUE (0xC00E0018)
//
// MQ_ERROR_ILLEGAL_ENTERPRISE_OPERATION (0xC00E0071)
//
// MQ_ERROR (0xC00E0001)
//
// MQ_ERROR_DS_ERROR (0xC00E0043)
//
// MQDS_OBJECT_NOT_FOUND (0xC00E050F)
//
// E_ADS_PROPERTY_NOT_FOUND (0x8000500D)
//
// Exceptions Thrown: No exceptions are thrown beyond those thrown by the underlying
// RPC protocol, as specified in [MS-RPCE].
CreateObject(context.Context, *CreateObjectRequest) (*CreateObjectResponse, error)
// This method deletes a directory object specified by a directory service pathname.
//
// Return Values: If the method succeeds, the return value is 0. If the method fails,
// the return value is an implementation-specific error code.
//
// MQ_OK (0x00000000)
//
// MQ_ERROR_INVALID_PARAMETER (0xC00E0006)
//
// Exceptions Thrown: No exceptions are thrown beyond those thrown by the underlying
// RPC protocol, as specified in [MS-RPCE].
//
// The server SHOULD enforce appropriate security measures to make sure that the caller
// has the required permissions to execute this routine. If the server enforces security
// measures, and the caller does not have the required credentials, the server MUST
// return an error.
DeleteObject(context.Context, *DeleteObjectRequest) (*DeleteObjectResponse, error)
// This method returns the properties associated with a directory object specified by
// a directory service pathname.
//
// Return Values: On success, this method MUST return MQ_OK (0x00000000); otherwise,
// the server MUST return a failure HRESULT. Additionally, if a failure HRESULT is returned,
// the client MUST disregard all out-parameter values.
//
// MQ_OK (0x00000000)
//
// MQ_ERROR_USER_BUFFER_TOO_SMALL (0xC00E0028)
//
// MQ_ERROR_INVALID_PARAMETER (0xC00E0006)
//
// MQ_ERROR_ILLEGAL_PROPID (0xC00E0039)
//
// MQ_ERROR (0xC00E0001)
//
// MQ_ERROR_DS_ERROR (0xC00E0043)
//
// MQDS_OBJECT_NOT_FOUND (0xC00E050F)
//
// E_ADS_PROPERTY_NOT_FOUND (0x8000500D)
//
// Exceptions Thrown: No exceptions are thrown beyond those thrown by the underlying
// RPC protocol, as specified in [MS-RPCE].
GetProperties(context.Context, *GetPropertiesRequest) (*GetPropertiesResponse, error)
// This method sets the specified properties for a directory object specified by a directory
// service pathname.
//
// Return Values: If the method succeeds, the return value is 0. If the method fails,
// the return value is an implementation-specific error code.
//
// MQ_OK (0x00000000)
//
// MQ_ERROR_ILLEGAL_PROPID (0xC00E0039)
//
// MQ_ERROR (0xC00E0001)
//
// MQ_ERROR_DS_ERROR (0xC00E0043)
//
// MQDS_OBJECT_NOT_FOUND (0xC00E050F)
//
// E_ADS_PROPERTY_NOT_FOUND (0x8000500D)
//
// Exceptions Thrown: No exceptions are thrown beyond those thrown by the underlying
// RPC protocol, as specified in [MS-RPCE].
SetProperties(context.Context, *SetPropertiesRequest) (*SetPropertiesResponse, error)
// This method gets security properties for a directory object specified by a directory
// service pathname.
//
// Return Values: If the method succeeds, the return value is 0. If the method fails,
// the return value is an implementation-specific error code.
//
// MQ_OK (0x00000000)
//
// MQ_ERROR_USER_BUFFER_TOO_SMALL (0xC00E0028)
//
// MQ_ERROR_SECURITY_DESCRIPTOR_TOO_SMALL (0xC00E0023)
//
// MQDS_WRONG_OBJ_TYPE (0xC00E0506)
//
// MQ_ERROR_INVALID_PARAMETER (0xC00E0006)
//
// Exceptions Thrown: No exceptions are thrown beyond those thrown by the underlying
// RPC protocol, as specified in [MS-RPCE].
GetObjectSecurity(context.Context, *GetObjectSecurityRequest) (*GetObjectSecurityResponse, error)
// This method sets security properties for a directory object specified by a directory
// service pathname.
//
// Return Values: If the method succeeds, the return value is 0x00000000. If the method
// fails, the return value is an implementation-specific error code.
//
// MQ_OK (0x00000000)
//
// Exceptions Thrown: No exceptions are thrown beyond those thrown by the underlying
// RPC extension protocol, as specified in [MS-RPCE].
SetObjectSecurity(context.Context, *SetObjectSecurityRequest) (*SetObjectSecurityResponse, error)
// This method performs a query over the directory objects and returns an RPC context
// handle that can be used to retrieve the result set through a subsequent series of
// calls to S_DSLookupNext (section 3.1.4.18). When the client has no further use of
// the RPC context handle returned from this method, the client can close the context
// handle through a call to S_DSLookupEnd (section 3.1.4.19).
//
// Return Values: If the method succeeds, the return value is 0. If the method fails,
// the return value is an implementation-specific error code.
//
// MQ_OK (0x00000000)
//
// Exceptions Thrown: No exceptions are thrown beyond those thrown by the underlying
// RPC extension protocol, as specified in [MS-RPCE].
LookupBegin(context.Context, *LookupBeginRequest) (*LookupBeginResponse, error)
// This method returns a portion of the data from the result set computed in a previous
// call to S_DSLookupBegin (section 3.1.4.17) and updates the cursor index to the first
// directory object that has not yet been returned to the client.
//
// Return Values: If the method succeeds, the return value is 0. If the method fails,
// the return value is an implementation-specific error code.
//
// MQ_OK (0x00000000)
//
// MQ_ERROR_USER_BUFFER_TOO_SMALL (0xC00E0028)
//
// Exceptions Thrown: No exceptions are thrown beyond those thrown by the underlying
// RPC extension protocol, as specified in [MS-RPCE].
LookupNext(context.Context, *LookupNextRequest) (*LookupNextResponse, error)
// This method closes an opened RPC context handle created from a previous call to S_DSLookupBegin
// (section 3.1.4.17).
//
// Return Values: If the method succeeds, the return value is 0. If the method fails,
// the return value is an implementation-specific error code.
//
// MQ_OK (0x00000000)
//
// Exceptions Thrown: No exceptions are thrown beyond those thrown by the underlying
// RPC extension protocol, as specified in [MS-RPCE].
LookupEnd(context.Context, *LookupEndRequest) (*LookupEndResponse, error)
// This method deletes a directory object specified by an object identifier.
//
// Return Values: If the method succeeds, the return value is 0. If the method fails,
// the return value is an implementation-specific error code.
//
// MQ_OK (0x00000000)
//
// MQ_ERROR_INVALID_PARAMETER (0xC00E0006)
//
// Exceptions Thrown: No exceptions are thrown beyond those thrown by the underlying
// RPC protocol, as specified in [MS-RPCE].
//
// The server SHOULD enforce appropriate security measures to make sure that the caller
// has the required permissions to execute this routine. If the server enforces security
// measures, and the caller does not have the required credentials, the server MUST
// return an error.
DeleteObjectGUID(context.Context, *DeleteObjectGUIDRequest) (*DeleteObjectGUIDResponse, error)
// This method returns properties associated with a directory object specified by an
// object identifier.
//
// Return Values: On success, this method MUST return MQ_OK (0x00000000); otherwise,
// the server MUST return a failure HRESULT. Additionally, if a failure HRESULT is returned,
// the client MUST disregard all out-parameter values.
//
// MQ_OK (0x00000000)
//
// MQ_ERROR_USER_BUFFER_TOO_SMALL (0xC00E0028)
//
// MQ_ERROR_INVALID_PARAMETER (0xC00E0006)
//
// MQ_ERROR_ILLEGAL_PROPID (0xC00E0039)
//
// MQ_ERROR (0xC00E0001)
//
// MQ_ERROR_DS_ERROR (0xC00E0043)
//
// MQDS_OBJECT_NOT_FOUND (0xC00E050F)
//
// E_ADS_PROPERTY_NOT_FOUND (0x8000500D)
//
// Exceptions Thrown: No exceptions are thrown beyond those thrown by the underlying
// RPC protocol, as specified in [MS-RPCE].
GetPropertiesGUID(context.Context, *GetPropertiesGUIDRequest) (*GetPropertiesGUIDResponse, error)
// This method sets properties for a directory object specified by an object identifier.
//
// Return Values: If the method succeeds, the return value is 0. If the method fails,
// the return value is an implementation-specific error code.
//
// MQ_OK (0x00000000)
//
// MQ_ERROR_ILLEGAL_PROPID (0xC00E0039)
//
// MQ_ERROR (0xC00E0001)
//
// MQ_ERROR_DS_ERROR (0xC00E0043)
//
// MQDS_OBJECT_NOT_FOUND (0xC00E050F)
//
// E_ADS_PROPERTY_NOT_FOUND (0x8000500D)
//
// Exceptions Thrown: No exceptions are thrown beyond those thrown by the underlying
// RPC protocol, as specified in [MS-RPCE].
SetPropertiesGUID(context.Context, *SetPropertiesGUIDRequest) (*SetPropertiesGUIDResponse, error)
// This method retrieves the security descriptor for a directory object specified by
// an object identifier.
//
// Return Values: If the method succeeds, the return value is 0. If the method fails,
// the return value is an implementation-specific error code.
//
// MQ_OK (0x00000000)
//
// MQ_ERROR_SECURITY_DESCRIPTOR_TOO_SMALL (0xC00E0023)
//
// MQ_ERROR_USER_BUFFER_TOO_SMALL (0xC00E0028)
//
// Exceptions Thrown: No exceptions are thrown beyond those thrown by the underlying
// RPC extension protocol, as specified in [MS-RPCE].
GetObjectSecurityGUID(context.Context, *GetObjectSecurityGUIDRequest) (*GetObjectSecurityGUIDResponse, error)
// This method sets security properties for a directory object specified by an object
// identifier.
//
// Return Values: If the method succeeds, the return value is 0x00000000. If the method
// fails, the return value is an implementation-specific error code.
//
// MQ_OK (0x00000000)
//
// Exceptions Thrown: No exceptions are thrown beyond those thrown by the underlying
// RPC protocol extension, as specified in [MS-RPCE].
SetObjectSecurityGUID(context.Context, *SetObjectSecurityGUIDRequest) (*SetObjectSecurityGUIDResponse, error)
// This method sets properties associated with a machine object specified by a directory
// service pathname. This method is intended for use by a queue manager to manipulate
// its own directory service object of type MQDS_MACHINE. Client applications SHOULD
// NOT use this method.<76>
//
// Return Values: If the method succeeds, the return value is 0. If the method fails,
// the return value is an implementation-specific error code.
//
// MQ_OK (0x00000000)
//
// MQ_ERROR_ILLEGAL_PROPID (0xC00E0039)
//
// MQ_ERROR (0xC00E0001)
//
// MQ_ERROR_DS_ERROR (0xC00E0043)
//
// MQDS_OBJECT_NOT_FOUND (0xC00E050F)
//
// E_ADS_PROPERTY_NOT_FOUND (0x8000500D)
//
// Exceptions Thrown: No exceptions are thrown beyond those thrown by the underlying
// RPC extension protocol, as specified in [MS-RPCE].
QMSetMachineProperties(context.Context, *QMSetMachinePropertiesRequest) (*QMSetMachinePropertiesResponse, error)
// This method returns a list of Backup Site Controllers (BSCs) associated with a specified
// site. The client calls this method to enumerate the BSCs associated with sites in
// the configured list of sites in the enterprise.
//
// Return Values: If the method succeeds, the return value is 0. If the method fails,
// the return value is an implementation-specific error code. The server MUST return
// MQDS_E_NO_MORE_DATA (0xC00E0523), if pdwIndex is an invalid index, into the configured
// list of sites in the enterprise.
//
// MQ_OK (0x00000000)
//
// MQDS_E_NO_MORE_DATA (0xC00E0523)
//
// MQ_ERROR_USER_BUFFER_TOO_SMALL (0xC00E0028)
//
// Exceptions Thrown: No exceptions are thrown beyond those thrown by the underlying
// RPC extension protocol, as specified in [MS-RPCE].
//
// The S_DSCreateServersCache method returns information on Backup Site Controllers
// (BSCs) associated with sites in the enterprise. The client uses this method to iterate
// through the list of sites in the enterprise by calling the method repeatedly. Before
// the first invocation, the client sets the pdwIndex parameter to 0. After each successful
// invocation, the client increments the pdwIndex parameter by 1 and calls the method
// again. The client repeats this sequence until the method call returns an error.
CreateServersCache(context.Context, *CreateServersCacheRequest) (*CreateServersCacheResponse, error)
// This method is a callback method called by the server during a client call to S_DSQMSetMachineProperties.
// Through this method, the server provides a challenge that the client must sign to
// authenticate itself.
//
// Return Values: This method is obsolete. The server SHOULD NOT call this method,
// and the client SHOULD return MQ_ERROR_NOT_SUPPORTED (0xC00E03EB).<146> If the method
// succeeds, the return value is 0. If the method fails, the return value is an implementation-specific
// error code.
//
// ERROR_SUCCESS (0x00000000)
//
// MQ_ERROR_NOT_SUPPORTED (0xC00E03EB)
//
// Exceptions Thrown: No exceptions are thrown beyond those thrown by the underlying
// RPC extension protocol, as specified in [MS-RPCE].
QMSetMachinePropertiesSignProc(context.Context, *QMSetMachinePropertiesSignProcRequest) (*QMSetMachinePropertiesSignProcResponse, error)
// This method retrieves the security descriptor for a directory object specified by
// an object identifier.
//
// Return Values: If the method succeeds, the return value is 0x00000000. If the method
// fails, the return value is an implementation-specific error code.
//
// MQ_OK (0x00000000)
//
// MQ_ERROR_SECURITY_DESCRIPTOR_TOO_SMALL (0xC00E0023)
//
// MQ_ERROR_USER_BUFFER_TOO_SMALL (0xC00E0028)
//
// Exceptions Thrown: No exceptions are thrown beyond those thrown by the underlying
// RPC extension protocol, as specified in [MS-RPCE].
QMGetObjectSecurity(context.Context, *QMGetObjectSecurityRequest) (*QMGetObjectSecurityResponse, error)
// S_DSQMGetObjectSecurityChallengeResponceProc is a callback method called by the server
// during a client call to S_DSQMGetObjectSecurity. Through this method, the server
// provides a challenge that the client must sign to authenticate itself.
//
// Return Values: This method is obsolete. The server SHOULD NOT call this method,
// and the client SHOULD return MQ_ERROR_NOT_SUPPORTED (0xC00E03EB).<147> If the method
// succeeds, the return value is 0. If the method fails, the return value is an implementation-specific
// error code.
//
// ERROR_SUCCESS (0x00000000)
//
// MQ_ERROR_NOT_SUPPORTED (0xC00E03EB)
//
// Exceptions Thrown: No exceptions are thrown beyond those thrown by the underlying
// RPC protocol extension, as specified in [MS-RPCE].
QMGetObjectSecurityChallengeResponseProc(context.Context, *QMGetObjectSecurityChallengeResponseProcRequest) (*QMGetObjectSecurityChallengeResponseProcResponse, error)
// This method is a callback method called by the server during a client call to S_DSValidateServer.
// These two methods are used to tunnel a GSS (as specified in [RFC2743]) security negotiation
// to provide mutual authentication between the client and server.
//
// Return Values: If the method succeeds, and the negotiation is complete, the return
// value is 0. If the method succeeds, and the negotiation is not complete, the return
// value is SEC_I_CONTINUE_NEEDED (0x00090312). If the method fails, the return value
// is an implementation-specific error code.
//
// ERROR_SUCCESS (0x00000000)
//
// SEC_I_CONTINUE_NEEDED (0x00090312)
//
// Exceptions Thrown: No exceptions are thrown beyond those thrown by the underlying
// RPC extension protocol, as specified in [MS-RPCE].
//
// The caller MUST supply an input_token in pServerBuff computed through a call to GSS_Accept_sec_context.
// The receiver MUST process this input_token through a call to GSS_Init_sec_context,
// generating an output_token that MUST be returned in pServerBuff.
//
// If GSS_Init_sec_context returns GSS_S_CONTINUE_NEEDED, this is a signal that the
// negotiation is not complete. The receiver MUST return SEC_I_CONTINUE_NEEDED (0x00090312).
//
// If GSS_Init_sec_context returns GSS_S_COMPLETE, the negotiation is complete. The
// receiver MUST save the output context handle in the GSS security context state associated
// with the dwContext parameter. The receiver MUST return SEC_E_OK (0x00000000).
InitSecurityContext(context.Context, *InitSecurityContextRequest) (*InitSecurityContextResponse, error)
// This method performs mutual authentication between the client and server, and establishes
// a security context, as specified in [RFC2743]. The server uses the security context
// to construct a digital signature in subsequent method calls of this protocol, and
// the client uses the security context to validate the digital signature. The digital
// signature is used in methods that return data to the client. It allows the client
// to authenticate the source of the data and ensures that it has not been tampered
// with en route from the server to the client.
//
// When the client has no further use of the RPC context handle returned from this method,
// it releases the handle through a subsequent call to S_DSCloseServerHandle (section
// 3.1.4.3).
//
// Return Values: If the method succeeds, the return value is 0. If the method fails,
// the return value is an implementation-specific error code.
//
// MQ_OK (0x00000000)
//
// MQ_ERROR_DS_ERROR (0xC00E0043)
//
// MQDS_E_CANT_INIT_SERVER_AUTH (0xC00E052B)
//
// Exceptions Thrown: No exceptions are thrown beyond those thrown by the underlying
// RPC protocol as specified in [MS-RPCE].
//
// If the dwClientBuffSize parameter is zero, the server MUST initialize an empty security
// context in the security context table associated with the pphServerAuth parameter
// and MUST NOT invoke client callback methods. In addition, all signature parameters
// in other methods in this protocol that return server signatures MUST be set to all
// zeros.
//
// If the dwClientBuffSize parameter is nonzero, the server MUST construct a valid non-empty
// security context in the security context table associated with the pphServerAuth
// parameter.
//
// The client MUST supply an input_token in the pClientBuff parameter, acquired through
// an initial call to GSS_Init_sec_context, as specified in [RFC2743] section 2.2.1.
// The server MUST perform the following processing.
//
// *
//
// Let inputToken point to an input_token initialized to the pClientBuff parameter.
//
// *
//
// Call *GSS_Accept_sec_context* , as specified in [RFC2743] section 2.2.2, with the
// input_token contained in inputToken and a NULL input_context_handle.
//
// *
//
// If *GSS_Accept_sec_context* returns GSS_S_COMPLETE, the negotiation is complete.
// The server MUST allocate a PCONTEXT_HANDLE_SERVER_AUTH_TYPE RPC context handle and
// MUST allocate a security context entry in the security table keyed by the context
// handle. The server MUST associate the GSS security context (output_context_handle
// from the GSSAPI call) with the security context entry. The server MUST return the
// RPC context handle in the pphServerAuth parameter and return MQ_OK.
//
// *
//
// If *GSS_Accept_sec_context* returns GSS_S_CONTINUE_NEEDED, the server MUST issue
// a callback to the client through the S_InitSecCtx (section 3.2.4.3) method with the
// dwContext parameter set to the value supplied by the client in the dwContext parameter
// and the pServerBuff parameter set to the output_token returned from *GSS_Accept_sec_context*.
// When the callback to S_InitSecCtx returns, the server MUST set inputToken to the
// pClientBuff parameter returned by S_InitSecCtx and MUST continue at step 2.
//
// *
//
// If *GSS_Accept_sec_context* returns any other value, the server MUST take no further
// action and return a failure HRESULT ( ../ms-dtyp/a9046ed2-bfb2-4d56-a719-2824afce59ac
// ).
//
// The GSS security context is used by the server in subsequent calls to GSSWrap, as
// specified in [RFC2743] section 2.3.3.
//
// On successful return, the client MUST retrieve the GSS security context associated
// with the dwContext parameter and MUST associate it with the PCONTEXT_HANDLE_SERVER_AUTH_TYPE
// RPC context handle returned in the pphServerAuth parameter. The GSS security context
// will be used by the client in subsequent calls to GSSUnwrap, as specified in [RFC2743]
// section 2.3.4.
ValidateServer(context.Context, *ValidateServerRequest) (*ValidateServerResponse, error)
// This method closes the RPC context handle returned by a previous call to S_DSValidateServer.
// The server releases resources associated with the RPC context handle.
//
// Return Values: If the method succeeds, the return value is 0. If the method fails,
// the return value is an implementation-specific error code.
//
// MQ_OK (0x00000000)
//
// Exceptions Thrown: No exceptions are thrown beyond those thrown by the underlying
// RPC protocol as specified in [MS-RPCE].
CloseServer(context.Context, *CloseServerRequest) (*CloseServerResponse, error)
// This method returns the RPC endpoint port for a transport protocol. The client establishes
// a new binding to the server by using the returned port number.
//
// Return Values: If the method succeeds, the return value is the RPC endpoint port
// number. If the method fails, the server MUST return 0.
//
// MQ_OK (0x00000000)
//
// Exceptions Thrown: No exceptions are thrown beyond those thrown by the underlying
// RPC protocol as specified in [MS-RPCE].
GetServerPort(context.Context, *GetServerPortRequest) (*GetServerPortResponse, error)
}
dscomm server interface.
type GetObjectSecurityGUIDRequest ¶
type GetObjectSecurityGUIDRequest struct {
// dwObjectType: Specifies the type of object for which security properties are to
// be retrieved. MUST be set to one of the object types specified in section 2.2.8.
ObjectType uint32 `idl:"name:dwObjectType" json:"object_type"`
// pGuid: MUST be set by the client to a pointer to the GUID of the object for which
// to retrieve security information.
GUID *dtyp.GUID `idl:"name:pGuid" json:"guid"`
// SecurityInformation: MUST be set by the client to a bitwise mask specifying the
// information to return in the pSecurityDescriptor parameter. See the SecurityInformation
// parameter description in section 3.1.4.11.
SecurityInformation uint32 `idl:"name:SecurityInformation" json:"security_information"`
// nLength: MUST be set by the client to the length in bytes of the pSecurityDescriptor
// buffer.
Length uint32 `idl:"name:nLength" json:"length"`
// phServerAuth: A PCONTEXT_HANDLE_SERVER_AUTH_TYPE RPC context handle acquired from
// the pphServerAuth parameter in a previous call to S_DSValidateServer. The server
// MUST use this parameter as a key to locate the GSS security context used to compute
// the signature returned in pbServerSignature. See section 3.1.4.2.
ServerAuth *ServerAuthType `idl:"name:phServerAuth" json:"server_auth"`
// pdwServerSignatureSize: A DWORD that contains the maximum length in bytes of the
// server signature to return.
ServerSignatureSize uint32 `idl:"name:pdwServerSignatureSize" json:"server_signature_size"`
}
GetObjectSecurityGUIDRequest structure represents the S_DSGetObjectSecurityGuid operation request
func (*GetObjectSecurityGUIDRequest) MarshalNDR ¶
func (*GetObjectSecurityGUIDRequest) UnmarshalNDR ¶
type GetObjectSecurityGUIDResponse ¶
type GetObjectSecurityGUIDResponse struct {
// pSecurityDescriptor: If the SecurityInformation parameter is MQDS_SIGN_PUBLIC_KEY
// or MQDS_KEYX_PUBLIC_KEY, it SHOULD<59> contain a pointer to a BLOBHEADER structure
// followed by an RSAPUBKEY (section 2.2.18) structure. Otherwise, this parameter contains
// a pointer to a security descriptor, as specified in [MS-DTYP] section 2.4.6.
SecurityDescriptor []byte `idl:"name:pSecurityDescriptor;size_is:(nLength)" json:"security_descriptor"`
// lpnLengthNeeded: A DWORD that the server MUST set to the length in bytes of the requested
// security descriptor or public key. If the requested security descriptor or public
// key is larger than nLength, the server MUST set this parameter to the size in bytes
// needed for the requested security descriptor or public key, and return MQ_ERROR_SECURITY_DESCRIPTOR_TOO_SMALL
// (0xC00E0023).
LengthNeeded uint32 `idl:"name:lpnLengthNeeded" json:"length_needed"`
// pbServerSignature: MUST point to the signed hash of the security descriptor.
ServerSignature []byte `idl:"name:pbServerSignature;size_is:(pdwServerSignatureSize)" json:"server_signature"`
// pdwServerSignatureSize: A DWORD that contains the maximum length in bytes of the
// server signature to return.
ServerSignatureSize uint32 `idl:"name:pdwServerSignatureSize" json:"server_signature_size"`
// Return: The S_DSGetObjectSecurityGuid return value.
Return int32 `idl:"name:Return" json:"return"`
}
GetObjectSecurityGUIDResponse structure represents the S_DSGetObjectSecurityGuid operation response
func (*GetObjectSecurityGUIDResponse) MarshalNDR ¶
func (*GetObjectSecurityGUIDResponse) UnmarshalNDR ¶
type GetObjectSecurityRequest ¶
type GetObjectSecurityRequest struct {
// dwObjectType: Specifies the type of object for which security properties are to
// be retrieved. MUST be set to one of the object types defined in section 2.2.8.
ObjectType uint32 `idl:"name:dwObjectType" json:"object_type"`
// pwcsPathName: Pointer to a NULL-terminated 16-bit Unicode string that MUST contain
// the directory service pathname, as specified in section 2.2.9, of the object in the
// directory service.
PathName string `idl:"name:pwcsPathName;string" json:"path_name"`
// SecurityInformation: A bitwise mask of the information to be returned in the pSecurityDescriptor
// parameter. The bit fields are defined by the following table:
//
// +---------------------------------------+-------------------------------------------------------+
// | | |
// | VALUE | MEANING |
// | | |
// +---------------------------------------+-------------------------------------------------------+
// +---------------------------------------+-------------------------------------------------------+
// | OWNER_SECURITY_INFORMATION 0x00000001 | OWNER field from the security descriptor. |
// +---------------------------------------+-------------------------------------------------------+
// | GROUP_SECURITY_INFORMATION 0x00000002 | GROUP field from the security descriptor. |
// +---------------------------------------+-------------------------------------------------------+
// | DACL_SECURITY_INFORMATION 0x00000004 | Discretionary ACL field from the security descriptor. |
// +---------------------------------------+-------------------------------------------------------+
// | SACL_SECURITY_INFORMATION 0x00000008 | System ACL field from the security descriptor. |
// +---------------------------------------+-------------------------------------------------------+
// | MQDS_SIGN_PUBLIC_KEY 0x80000000 | Signing public key. |
// +---------------------------------------+-------------------------------------------------------+
// | MQDS_KEYX_PUBLIC_KEY 0x40000000 | Encrypting public key. |
// +---------------------------------------+-------------------------------------------------------+
//
// The SecurityInformation parameter MUST specify one of:
//
// * MQDS_SIGN_PUBLIC_KEY, or
//
// * MQDS_KEYX_PUBLIC_KEY, or
//
// * A bitwise OR of any combination of:
//
// * OWNER_SECURITY_INFORMATION
//
// * GROUP_SECURITY_INFORMATION
//
// * DACL_SECURITY_INFORMATION
//
// * SACL_SECURITY_INFORMATION
//
// If the SecurityInformation parameter includes an invalid combination, the server
// MUST NOT complete the call, and MUST return an error.
SecurityInformation uint32 `idl:"name:SecurityInformation" json:"security_information"`
// nLength: MUST be set by the client to the length in bytes of the pSecurityDescriptor
// buffer.
Length uint32 `idl:"name:nLength" json:"length"`
// phServerAuth: A PCONTEXT_HANDLE_SERVER_AUTH_TYPE RPC context handle acquired from
// the pphServerAuth parameter in a previous call to S_DSValidateServer. The server
// MUST use this parameter as a key to locate the GSS security context used to compute
// the signature returned in pbServerSignature. See section 3.1.4.2.
ServerAuth *ServerAuthType `idl:"name:phServerAuth" json:"server_auth"`
// pdwServerSignatureSize: A DWORD that contains the maximum length in bytes of the
// server signature to return.
ServerSignatureSize uint32 `idl:"name:pdwServerSignatureSize" json:"server_signature_size"`
}
GetObjectSecurityRequest structure represents the S_DSGetObjectSecurity operation request
func (*GetObjectSecurityRequest) MarshalNDR ¶
func (*GetObjectSecurityRequest) UnmarshalNDR ¶
type GetObjectSecurityResponse ¶
type GetObjectSecurityResponse struct {
// pSecurityDescriptor: If the SecurityInformation parameter is MQDS_SIGN_PUBLIC_KEY
// or MQDS_KEYX_PUBLIC_KEY, it SHOULD<55> contain a pointer to a BLOBHEADER (section
// 2.2.19) structure followed by an RSAPUBKEY (section 2.2.18) structure. Otherwise,
// this parameter contains a security descriptor, as specified in [MS-DTYP] section
// 2.4.6.
SecurityDescriptor []byte `idl:"name:pSecurityDescriptor;size_is:(nLength)" json:"security_descriptor"`
// lpnLengthNeeded: A DWORD representing the length in bytes of the requested security
// descriptor or public key.
LengthNeeded uint32 `idl:"name:lpnLengthNeeded" json:"length_needed"`
// pbServerSignature: Contains a signed hash over the returned property values.
ServerSignature []byte `idl:"name:pbServerSignature;size_is:(pdwServerSignatureSize)" json:"server_signature"`
// pdwServerSignatureSize: A DWORD that contains the maximum length in bytes of the
// server signature to return.
ServerSignatureSize uint32 `idl:"name:pdwServerSignatureSize" json:"server_signature_size"`
// Return: The S_DSGetObjectSecurity return value.
Return int32 `idl:"name:Return" json:"return"`
}
GetObjectSecurityResponse structure represents the S_DSGetObjectSecurity operation response
func (*GetObjectSecurityResponse) MarshalNDR ¶
func (*GetObjectSecurityResponse) UnmarshalNDR ¶
type GetPropertiesGUIDRequest ¶
type GetPropertiesGUIDRequest struct {
// dwObjectType: Specifies the type of object for which properties are retrieved.
// MUST be set to one of the object types specified in section 2.2.8.
ObjectType uint32 `idl:"name:dwObjectType" json:"object_type"`
// pGuid: MUST be set by the client to a pointer to the GUID of the object for which
// properties are retrieved.
GUID *dtyp.GUID `idl:"name:pGuid;pointer:unique" json:"guid"`
// cp: MUST be set to the size (in elements) of the arrays aProp and apVar. The arrays
// aProp and apVar MUST have an identical number of elements and MUST contain at least
// one element.
CreatePartition uint32 `idl:"name:cp" json:"create_partition"`
// aProp: An array of identifiers of properties to retrieve from the object designated
// by pGuid. Each element MUST specify a value from the property identifiers table (defined
// in section 2.2.10.1) for the object type specified in dwObjectType. Each element
// MUST specify the property identifier for the corresponding property value at the
// same element index in apVar. The array MUST contain at least one element.
Property []uint32 `idl:"name:aProp;size_is:(cp)" json:"property"`
// apVar: On input, each element MUST be initialized to the appropriate VARTYPE ([MS-MQMQ]
// section 2.2.12.1) for the associated property specified by the same element in aProp,
// or VT_NULL. On success, the server MUST populate the elements of this array with
// property values for the properties identified by the corresponding elements of aProp.
// The array MUST contain at least one element.
Var []*mqmq.PropertyVariant `idl:"name:apVar;size_is:(cp)" json:"var"`
// phServerAuth: A PCONTEXT_HANDLE_SERVER_AUTH_TYPE RPC context handle acquired from
// the pphServerAuth parameter in a previous call to S_DSValidateServer. The server
// MUST use this parameter as a key to locate the GSS security context used to compute
// the signature returned in the pbServerSignature parameter. See section 3.1.4.2.
ServerAuth *ServerAuthType `idl:"name:phServerAuth" json:"server_auth"`
// pdwServerSignatureSize: Contains the maximum length in bytes of the server signature
// to return.
ServerSignatureSize uint32 `idl:"name:pdwServerSignatureSize" json:"server_signature_size"`
}
GetPropertiesGUIDRequest structure represents the S_DSGetPropsGuid operation request
func (*GetPropertiesGUIDRequest) MarshalNDR ¶
func (*GetPropertiesGUIDRequest) UnmarshalNDR ¶
type GetPropertiesGUIDResponse ¶
type GetPropertiesGUIDResponse struct {
// apVar: On input, each element MUST be initialized to the appropriate VARTYPE ([MS-MQMQ]
// section 2.2.12.1) for the associated property specified by the same element in aProp,
// or VT_NULL. On success, the server MUST populate the elements of this array with
// property values for the properties identified by the corresponding elements of aProp.
// The array MUST contain at least one element.
Var []*mqmq.PropertyVariant `idl:"name:apVar;size_is:(cp)" json:"var"`
// pbServerSignature: See the pbServerSignature parameter description, as specified
// in section 3.1.4.7.
ServerSignature []byte `idl:"name:pbServerSignature;size_is:(pdwServerSignatureSize)" json:"server_signature"`
// pdwServerSignatureSize: Contains the maximum length in bytes of the server signature
// to return.
ServerSignatureSize uint32 `idl:"name:pdwServerSignatureSize" json:"server_signature_size"`
// Return: The S_DSGetPropsGuid return value.
Return int32 `idl:"name:Return" json:"return"`
}
GetPropertiesGUIDResponse structure represents the S_DSGetPropsGuid operation response
func (*GetPropertiesGUIDResponse) MarshalNDR ¶
func (*GetPropertiesGUIDResponse) UnmarshalNDR ¶
type GetPropertiesRequest ¶
type GetPropertiesRequest struct {
// dwObjectType: Specifies the type of object for which properties are to be retrieved.
// MUST be set to one of the object types specified in section 2.2.8.
ObjectType uint32 `idl:"name:dwObjectType" json:"object_type"`
// pwcsPathName: Pointer to a NULL-terminated 16-bit Unicode string that MUST contain
// the directory service pathname, as specified in section 2.2.9, to the object in the
// directory service.
PathName string `idl:"name:pwcsPathName;string" json:"path_name"`
// cp: MUST be set to the size (in elements) of the arrays aProp and apVar. The arrays
// aProp and apVar MUST have an identical number of elements and MUST contain at least
// one element.
CreatePartition uint32 `idl:"name:cp" json:"create_partition"`
// aProp: An array of property identifiers specifying the set of object properties
// to be returned. Each element MUST specify a value from the property identifiers table
// defined in section 2.2.10.1 for the object type specified in dwObjectType. Each element
// MUST specify the property identifier for the corresponding property value at the
// same element index in apVar. The array MUST contain at least one element.
Property []uint32 `idl:"name:aProp;size_is:(cp)" json:"property"`
// apVar: On input, each element MUST be initialized to the appropriate VARTYPE ([MS-MQMQ]
// section 2.2.12.1) for the associated property specified by the same element in aProp,
// or VT_NULL. On success, the server MUST populate the elements of this array with
// property values for the properties identified by the corresponding elements of aProp.
// The array MUST contain at least one element.
Var []*mqmq.PropertyVariant `idl:"name:apVar;size_is:(cp)" json:"var"`
// phServerAuth: A PCONTEXT_HANDLE_SERVER_AUTH_TYPE RPC context handle acquired from
// the pphServerAuth parameter in a previous call to S_DSValidateServer. The server
// MUST use this parameter as a key to locate the GSS security context used to compute
// the signature returned in pbServerSignature. See section 3.1.4.2.
ServerAuth *ServerAuthType `idl:"name:phServerAuth" json:"server_auth"`
// pdwServerSignatureSize: Contains the maximum length in bytes of the server signature
// to return.
ServerSignatureSize uint32 `idl:"name:pdwServerSignatureSize" json:"server_signature_size"`
}
GetPropertiesRequest structure represents the S_DSGetProps operation request
func (*GetPropertiesRequest) MarshalNDR ¶
func (*GetPropertiesRequest) UnmarshalNDR ¶
type GetPropertiesResponse ¶
type GetPropertiesResponse struct {
// apVar: On input, each element MUST be initialized to the appropriate VARTYPE ([MS-MQMQ]
// section 2.2.12.1) for the associated property specified by the same element in aProp,
// or VT_NULL. On success, the server MUST populate the elements of this array with
// property values for the properties identified by the corresponding elements of aProp.
// The array MUST contain at least one element.
Var []*mqmq.PropertyVariant `idl:"name:apVar;size_is:(cp)" json:"var"`
// pbServerSignature: Contains a signed hash over the returned property values.
ServerSignature []byte `idl:"name:pbServerSignature;size_is:(pdwServerSignatureSize)" json:"server_signature"`
// pdwServerSignatureSize: Contains the maximum length in bytes of the server signature
// to return.
ServerSignatureSize uint32 `idl:"name:pdwServerSignatureSize" json:"server_signature_size"`
// Return: The S_DSGetProps return value.
Return int32 `idl:"name:Return" json:"return"`
}
GetPropertiesResponse structure represents the S_DSGetProps operation response
func (*GetPropertiesResponse) MarshalNDR ¶
func (*GetPropertiesResponse) UnmarshalNDR ¶
type GetServerPortRequest ¶
type GetServerPortRequest struct {
// fIP: Specifies the connected network protocol for which an RPC endpoint port is
// to be returned.
//
// +------------+----------------------------------------------------------------------------------+
// | | |
// | VALUE | MEANING |
// | | |
// +------------+----------------------------------------------------------------------------------+
// +------------+----------------------------------------------------------------------------------+
// | 0x00000000 | Causes the RPC endpoint port for an RPC over SPX protocol sequence, as specified |
// | | in [MS-RPCE], to be returned. |
// +------------+----------------------------------------------------------------------------------+
// | 0x00000001 | Causes the RPC endpoint port for an RPC over TCP/IP protocol sequence, as |
// | | specified in [MS-RPCE], to be returned. |
// +------------+----------------------------------------------------------------------------------+
IP uint32 `idl:"name:fIP" json:"ip"`
}
GetServerPortRequest structure represents the S_DSGetServerPort operation request
func (*GetServerPortRequest) MarshalNDR ¶
func (*GetServerPortRequest) UnmarshalNDR ¶
type GetServerPortResponse ¶
type GetServerPortResponse struct {
// Return: The S_DSGetServerPort return value.
Return uint32 `idl:"name:Return" json:"return"`
}
GetServerPortResponse structure represents the S_DSGetServerPort operation response
func (*GetServerPortResponse) MarshalNDR ¶
func (*GetServerPortResponse) UnmarshalNDR ¶
type InitSecurityContextRequest ¶
type InitSecurityContextRequest struct {
// dwContext: MUST be set by the caller to the correlation value supplied by the client
// in the dwContext parameter in the corresponding call to S_DSValidateServer. This
// parameter provides a way for the receiver to correlate the callback with the receiver's
// in-progress call to S_DSValidateServer.
Context uint32 `idl:"name:dwContext" json:"context"`
// pServerbuff: MUST be set by the caller to point to a buffer that contains the output_token
// from the GSS_Accept_sec_context, as specified in [RFC2743].
ServerBuffer []byte `idl:"name:pServerbuff;size_is:(dwServerBuffSize)" json:"server_buffer"`
// dwServerBuffSize: MUST be set by the caller to the length, in bytes, of the output_token
// within pServerBuff.
ServerBufferSize uint32 `idl:"name:dwServerBuffSize" json:"server_buffer_size"`
// dwClientBuffMaxSize: MUST be set by the caller to the size, in bytes, of the buffer
// to be returned in pClientBuff.
ClientBufferMaxSize uint32 `idl:"name:dwClientBuffMaxSize" json:"client_buffer_max_size"`
}
InitSecurityContextRequest structure represents the S_InitSecCtx operation request
func (*InitSecurityContextRequest) MarshalNDR ¶
func (*InitSecurityContextRequest) UnmarshalNDR ¶
type InitSecurityContextResponse ¶
type InitSecurityContextResponse struct {
// pClientBuff: MUST be set by the caller to point to a buffer to hold the returned
// token. MUST be set by the receiver to the output_token from a call to GSS_Init_sec_context.
// The buffer length MUST NOT exceed the value specified by dwClientBuffMaxSize. If
// the negotiated token is larger than the supplied buffer, the server MUST return MQ_ERROR_USER_BUFFER_TOO_SMALL
// (0xC00E0028).
ClientBuffer []byte `idl:"name:pClientBuff;size_is:(dwClientBuffMaxSize);length_is:(pdwClientBuffSize)" json:"client_buffer"`
// pdwClientBuffSize: MUST be set by the receiver to the actual size, in bytes, of
// the token in pClientBuff.
ClientBufferSize uint32 `idl:"name:pdwClientBuffSize" json:"client_buffer_size"`
// Return: The S_InitSecCtx return value.
Return int32 `idl:"name:Return" json:"return"`
}
InitSecurityContextResponse structure represents the S_InitSecCtx operation response
func (*InitSecurityContextResponse) MarshalNDR ¶
func (*InitSecurityContextResponse) UnmarshalNDR ¶
type LookupBeginRequest ¶
type LookupBeginRequest struct {
// pwcsContext: Unicode string that specifies a starting point of the query within
// the directory service. The client SHOULD set this parameter to NULL, and the server
// MUST ignore it.
Context string `idl:"name:pwcsContext;pointer:unique" json:"context"`
// pRestriction: A pointer to an MQRESTRICTION (section 2.2.12) structure specifying
// a set of constraints over the objects to be returned. The server MUST restrict the
// query results to include only objects that have properties that satisfy all of the
// restrictions specified in this parameter. See section 2.2.12.
Restriction *mqds.Restriction `idl:"name:pRestriction;pointer:unique" json:"restriction"`
// pColumns: A pointer to an MQCOLUMNSET (section 2.2.13) structure that specifies the
// object properties to be returned. The server MUST return (in the result set) only
// the properties specified by this parameter in the order specified by this parameter.
// See section 2.2.13.
Columns *mqds.ColumnSet `idl:"name:pColumns;pointer:ref" json:"columns"`
// pSort: A pointer to an MQSORTSET (section 2.2.15) structure that defines the sort
// order of the result set. The server MUST sort the objects in the result set according
// to this multikey sort order. See section 2.2.15.
Sort *mqds.SortSet `idl:"name:pSort;pointer:unique" json:"sort"`
// phServerAuth: A PCONTEXT_HANDLE_SERVER_AUTH_TYPE (section 2.2.5) RPC context handle
// acquired from the pphServerAuth parameter in a previous call to S_DSValidateServer
// (section 3.1.4.2).
ServerAuth *ServerAuthType `idl:"name:phServerAuth" json:"server_auth"`
}
LookupBeginRequest structure represents the S_DSLookupBegin operation request
func (*LookupBeginRequest) MarshalNDR ¶
func (*LookupBeginRequest) UnmarshalNDR ¶
type LookupBeginResponse ¶
type LookupBeginResponse struct {
// pHandle: MUST be set by the server to point to an RPC context handle to be used
// in subsequent calls to S_DSLookupNext and S_DSLookupEnd.
Handle *Type `idl:"name:pHandle" json:"handle"`
// Return: The S_DSLookupBegin return value.
Return int32 `idl:"name:Return" json:"return"`
}
LookupBeginResponse structure represents the S_DSLookupBegin operation response
func (*LookupBeginResponse) MarshalNDR ¶
func (*LookupBeginResponse) UnmarshalNDR ¶
type LookupEndRequest ¶
type LookupEndRequest struct {
// phContext: MUST point to an RPC context handle returned by a previous call to S_DSLookupBegin.
// MUST NOT have been used in a previous call to S_DSLookupEnd (section 3.1.4.19). The
// server MUST set this parameter to NULL.
Context *Type `idl:"name:phContext" json:"context"`
}
LookupEndRequest structure represents the S_DSLookupEnd operation request
func (*LookupEndRequest) MarshalNDR ¶
func (*LookupEndRequest) UnmarshalNDR ¶
type LookupEndResponse ¶
type LookupEndResponse struct {
// phContext: MUST point to an RPC context handle returned by a previous call to S_DSLookupBegin.
// MUST NOT have been used in a previous call to S_DSLookupEnd (section 3.1.4.19). The
// server MUST set this parameter to NULL.
Context *Type `idl:"name:phContext" json:"context"`
// Return: The S_DSLookupEnd return value.
Return int32 `idl:"name:Return" json:"return"`
}
LookupEndResponse structure represents the S_DSLookupEnd operation response
func (*LookupEndResponse) MarshalNDR ¶
func (*LookupEndResponse) UnmarshalNDR ¶
type LookupNextRequest ¶
type LookupNextRequest struct {
// Handle: MUST contain an RPC context handle acquired from a previous call to S_DSLookupBegin.
// The handle MUST NOT have been used in a previous call to S_DSLookupEnd (section 3.1.4.19).
Handle *Type `idl:"name:Handle" json:"handle"`
// dwSize: MUST point to an unsigned long that contains the maximum number of elements
// to be returned in the pbBuffer array. If this parameter is less than the number of
// elements in the pColumns parameter in the corresponding call to S_DSLookupBegin,
// the server MUST set the dwOutSize parameter to 0x00000000 and return without retrieving
// any object properties.
Size uint32 `idl:"name:dwSize" json:"size"`
// phServerAuth: A PCONTEXT_HANDLE_SERVER_AUTH_TYPE (section 2.2.5) RPC context handle
// acquired from the pphServerAuth parameter in a previous call to S_DSValidateServer
// (section 3.1.4.2). The server MUST use this parameter as a key to locate the GSS
// security context used to compute the signature returned in pbServerSignature. See
// section 3.1.4.2.
ServerAuth *ServerAuthType `idl:"name:phServerAuth" json:"server_auth"`
// pdwServerSignatureSize: MUST be set by the client to point to an unsigned LONG
// that contains the maximum length in bytes of the server signature to return. MUST
// be set by the server to the actual length in bytes of the server signature on output.
// If the server signature is larger than the supplied buffer, the server MUST return
// MQ_ERROR_USER_BUFFER_TOO_SMALL (0xC00E0028).
ServerSignatureSize uint32 `idl:"name:pdwServerSignatureSize" json:"server_signature_size"`
}
LookupNextRequest structure represents the S_DSLookupNext operation request
func (*LookupNextRequest) MarshalNDR ¶
func (*LookupNextRequest) UnmarshalNDR ¶
type LookupNextResponse ¶
type LookupNextResponse struct {
// dwOutSize: A pointer to an unsigned LONG that the server MUST set to the number of
// properties returned in pbBuffer for the set of objects being returned from this invocation
// of the S_DSLookupNext method. The server MUST return as many completed sets of properties
// as will fit in the buffer. If no matching objects are found, the server MUST set
// this parameter to 0 to inform the client that there is no more data.
OutSize uint32 `idl:"name:dwOutSize" json:"out_size"`
// pbBuffer: MUST point to an array of PROPVARIANT (section 2.2.3) structures to contain
// the returned properties.
Buffer []*mqmq.PropertyVariant `idl:"name:pbBuffer;size_is:(dwSize);length_is:(dwOutSize)" json:"buffer"`
// pbServerSignature: MUST point to the signed hash over the property values returned
// in pbBuffer. See the pbServerSignature parameter description in section 3.1.4.7.
ServerSignature []byte `idl:"name:pbServerSignature;size_is:(pdwServerSignatureSize)" json:"server_signature"`
// pdwServerSignatureSize: MUST be set by the client to point to an unsigned LONG
// that contains the maximum length in bytes of the server signature to return. MUST
// be set by the server to the actual length in bytes of the server signature on output.
// If the server signature is larger than the supplied buffer, the server MUST return
// MQ_ERROR_USER_BUFFER_TOO_SMALL (0xC00E0028).
ServerSignatureSize uint32 `idl:"name:pdwServerSignatureSize" json:"server_signature_size"`
// Return: The S_DSLookupNext return value.
Return int32 `idl:"name:Return" json:"return"`
}
LookupNextResponse structure represents the S_DSLookupNext operation response
func (*LookupNextResponse) MarshalNDR ¶
func (*LookupNextResponse) UnmarshalNDR ¶
type QMGetObjectSecurityChallengeResponseProcRequest ¶
type QMGetObjectSecurityChallengeResponseProcRequest struct {
// abChallenge: MUST be set by the caller to a pointer to a buffer that contains the
// challenge to be signed. The challenge SHOULD be cryptographically random.
Challenge []byte `idl:"name:abChallenge;size_is:(dwCallengeSize)" json:"challenge"`
// dwCallengeSize: MUST be set by the caller to the size, in bytes, of the challenge
// in the abChallenge parameter.
ChallengeSize uint32 `idl:"name:dwCallengeSize" json:"challenge_size"`
// dwContext: MUST be set by the caller to the value that was supplied in the dwContext
// parameter of the corresponding call to the S_DSQMGetObjectSecurity method. This parameter
// provides a way for the receiver to correlate the callback with the receiver's in-progress
// call to S_DSQMGetObjectSecurity.
Context uint32 `idl:"name:dwContext" json:"context"`
// abCallengeResponce: MUST be set by the caller to a pointer to a buffer to contain
// the returned signature. MUST be set by the receiver to a signature over the challenge
// in abChallenge. The algorithm for creating this signature is specified by the following
// pseudocode.
ChallengeResponse []byte `` /* 127-byte string literal not displayed */
// pdwCallengeResponceSize: Size in bytes of the signature in the abCallengeResponce
// parameter. MUST be set by the receiver to the actual length, in bytes, of the signature
// returned in abCallengeResponce on output.
ChallengeResponseSize uint32 `idl:"name:pdwCallengeResponceSize" json:"challenge_response_size"`
// dwCallengeResponceMaxSize: MUST be set by the caller to the maximum length in bytes
// of the server signature to be returned in abCallengeResponce. If the server signature
// is larger than the supplied buffer, the server MUST return MQ_ERROR_USER_BUFFER_TOO_SMALL
// (0xC00E0028).
ChallengeResponseMaxSize uint32 `idl:"name:dwCallengeResponceMaxSize" json:"challenge_response_max_size"`
}
QMGetObjectSecurityChallengeResponseProcRequest structure represents the S_DSQMGetObjectSecurityChallengeResponceProc operation request
func (*QMGetObjectSecurityChallengeResponseProcRequest) MarshalNDR ¶
func (*QMGetObjectSecurityChallengeResponseProcRequest) UnmarshalNDR ¶
type QMGetObjectSecurityChallengeResponseProcResponse ¶
type QMGetObjectSecurityChallengeResponseProcResponse struct {
// abCallengeResponce: MUST be set by the caller to a pointer to a buffer to contain
// the returned signature. MUST be set by the receiver to a signature over the challenge
// in abChallenge. The algorithm for creating this signature is specified by the following
// pseudocode.
ChallengeResponse []byte `` /* 127-byte string literal not displayed */
// pdwCallengeResponceSize: Size in bytes of the signature in the abCallengeResponce
// parameter. MUST be set by the receiver to the actual length, in bytes, of the signature
// returned in abCallengeResponce on output.
ChallengeResponseSize uint32 `idl:"name:pdwCallengeResponceSize" json:"challenge_response_size"`
// Return: The S_DSQMGetObjectSecurityChallengeResponceProc return value.
Return int32 `idl:"name:Return" json:"return"`
}
QMGetObjectSecurityChallengeResponseProcResponse structure represents the S_DSQMGetObjectSecurityChallengeResponceProc operation response
func (*QMGetObjectSecurityChallengeResponseProcResponse) MarshalNDR ¶
func (*QMGetObjectSecurityChallengeResponseProcResponse) UnmarshalNDR ¶
type QMGetObjectSecurityRequest ¶
type QMGetObjectSecurityRequest struct {
// dwObjectType: Specifies the type of object for which the security descriptor is retrieved.
// MUST be set to one of the object types specified in section 2.2.8.
ObjectType uint32 `idl:"name:dwObjectType" json:"object_type"`
// pGuid: MUST be set by the client to a pointer to the GUID of the object to retrieve
// security information.
GUID *dtyp.GUID `idl:"name:pGuid" json:"guid"`
// SecurityInformation: MUST be set by the client to a bitwise mask specifying the
// information to return in the pSecurityDescriptor parameter. See the SecurityInformation
// parameter description in section 3.1.4.11.
SecurityInformation uint32 `idl:"name:SecurityInformation" json:"security_information"`
// nLength: MUST be set by the client to the length in bytes of the pSecurityDescriptor
// buffer.
Length uint32 `idl:"name:nLength" json:"length"`
// dwContext: MUST be set by the client to a value that the client can use to correlate
// callbacks with the initial call to S_DSQMGetObjectSecurityChallengeResponceProc.
// The server MUST supply this value in the dwContext parameter in the related calls
// of the S_DSQMGetObjectSecurityChallengeResponceProc (section 3.2.4.2) callback method.
Context uint32 `idl:"name:dwContext" json:"context"`
// phServerAuth: A PCONTEXT_HANDLE_SERVER_AUTH_TYPE RPC context handle acquired from
// the pphServerAuth parameter in a previous call to S_DSValidateServer. The server
// MUST use this parameter as a key to locate the GSS security context used to compute
// the signature returned in pbServerSignature. See section 3.1.4.2.
ServerAuth *ServerAuthType `idl:"name:phServerAuth" json:"server_auth"`
// pdwServerSignatureSize: A DWORD that contains the maximum length in bytes of the
// server signature to return.
ServerSignatureSize uint32 `idl:"name:pdwServerSignatureSize" json:"server_signature_size"`
}
QMGetObjectSecurityRequest structure represents the S_DSQMGetObjectSecurity operation request
func (*QMGetObjectSecurityRequest) MarshalNDR ¶
func (*QMGetObjectSecurityRequest) UnmarshalNDR ¶
type QMGetObjectSecurityResponse ¶
type QMGetObjectSecurityResponse struct {
// pSecurityDescriptor: If the SecurityInformation parameter is MQDS_SIGN_PUBLIC_KEY
// or MQDS_KEYX_PUBLIC_KEY, it SHOULD <73> contain a pointer to a BLOBHEADER structure
// followed by an RSAPUBKEY (section 2.2.18) structure. Otherwise, this parameter contains
// a security descriptor, as specified in [MS-DTYP] section 2.4.6.
SecurityDescriptor []byte `idl:"name:pSecurityDescriptor;size_is:(nLength)" json:"security_descriptor"`
// lpnLengthNeeded: A DWORD that the server MUST set to the length in bytes of the requested
// security descriptor or Public Key. If the requested security descriptor or Public
// Key is larger than nLength, the server MUST set this parameter to the size in bytes
// needed for the requested security descriptor or Public Key, and return MQ_ERROR_SECURITY_DESCRIPTOR_TOO_SMALL
// (0xC00E0023).
LengthNeeded uint32 `idl:"name:lpnLengthNeeded" json:"length_needed"`
// pbServerSignature: MUST point to the signed hash of the security descriptor.
ServerSignature []byte `idl:"name:pbServerSignature;size_is:(pdwServerSignatureSize)" json:"server_signature"`
// pdwServerSignatureSize: A DWORD that contains the maximum length in bytes of the
// server signature to return.
ServerSignatureSize uint32 `idl:"name:pdwServerSignatureSize" json:"server_signature_size"`
// Return: The S_DSQMGetObjectSecurity return value.
Return int32 `idl:"name:Return" json:"return"`
}
QMGetObjectSecurityResponse structure represents the S_DSQMGetObjectSecurity operation response
func (*QMGetObjectSecurityResponse) MarshalNDR ¶
func (*QMGetObjectSecurityResponse) UnmarshalNDR ¶
type QMSetMachinePropertiesRequest ¶
type QMSetMachinePropertiesRequest struct {
// pwcsPathName: Pointer to a NULL-terminated 16-bit Unicode string that MUST contain
// the directory service pathname, as specified in section 2.2.9, of a machine object
// in the directory service.
PathName string `idl:"name:pwcsPathName;string" json:"path_name"`
// cp: MUST be set to the size (in elements) of the arrays aProp and apVar. The arrays
// aProp and apVar MUST have an identical number of elements, and MUST contain at least
// one element.
CreatePartition uint32 `idl:"name:cp" json:"create_partition"`
// aProp: An array of identifiers of properties to associate with the machine object.
// Each element MUST specify a value from the property identifiers table, as specified
// in section 2.2.10.1. Each element MUST specify the property identifier for the corresponding
// property value at the same element index in apVar. The array MUST contain at least
// one element.
Property []uint32 `idl:"name:aProp;size_is:(cp)" json:"property"`
// apVar: An array that specifies the property values to associate with the machine
// object. Each element MUST specify the property value for the corresponding property
// identifier at the same element index in aProp. The array MUST contain at least one
// element.
Var []*mqmq.PropertyVariant `idl:"name:apVar;size_is:(cp)" json:"var"`
// dwContext: MUST be set by the client to a value that the client can use to correlate
// callbacks with the initial call to S_DSQMSetMachineProperties. The server MUST supply
// this value in the dwContext parameter in the related calls of the S_DSQMSetMachinePropertiesSignProc
// (section 3.2.4.1) callback method.
Context uint32 `idl:"name:dwContext" json:"context"`
}
QMSetMachinePropertiesRequest structure represents the S_DSQMSetMachineProperties operation request
func (*QMSetMachinePropertiesRequest) MarshalNDR ¶
func (*QMSetMachinePropertiesRequest) UnmarshalNDR ¶
type QMSetMachinePropertiesResponse ¶
type QMSetMachinePropertiesResponse struct {
// Return: The S_DSQMSetMachineProperties return value.
Return int32 `idl:"name:Return" json:"return"`
}
QMSetMachinePropertiesResponse structure represents the S_DSQMSetMachineProperties operation response
func (*QMSetMachinePropertiesResponse) MarshalNDR ¶
func (*QMSetMachinePropertiesResponse) UnmarshalNDR ¶
type QMSetMachinePropertiesSignProcRequest ¶
type QMSetMachinePropertiesSignProcRequest struct {
// abChallenge: MUST be set by the caller to a pointer to a buffer that contains the
// challenge to be signed. The challenge SHOULD be cryptographically random.
Challenge []byte `idl:"name:abChallenge;size_is:(dwCallengeSize)" json:"challenge"`
// dwCallengeSize: MUST be set by the caller to the size in bytes of the challenge
// in the abChallenge parameter.
ChallengeSize uint32 `idl:"name:dwCallengeSize" json:"challenge_size"`
// dwContext: MUST be set by the caller to the value supplied by the client in the
// dwContext parameter of the corresponding call to the S_DSQMSetMachineProperties method.
// This parameter provides a way for the receiver to correlate the callback with the
// receiver's in-progress call to S_DSQMSetMachineProperties.
Context uint32 `idl:"name:dwContext" json:"context"`
// abSignature: MUST be set by the caller to a pointer to a buffer to contain the returned
// signature. MUST be set by the receiver to a signature over the challenge in abChallenge.
// The algorithm for creating this signature is specified by the following pseudocode.
Signature []byte `idl:"name:abSignature;size_is:(dwSignatureMaxSize);length_is:(pdwSignatureSize)" json:"signature"`
// pdwSignatureSize: Size in bytes of the signature in the abSignature parameter.
// MUST be set by the receiver to the actual length in bytes of the signature returned
// in abSignature on output.
SignatureSize uint32 `idl:"name:pdwSignatureSize" json:"signature_size"`
// dwSignatureMaxSize: MUST be set by the caller to the maximum length in bytes of
// the server signature to be returned in abSignature. If the signature is larger than
// the supplied buffer, the server MUST return MQ_ERROR_USER_BUFFER_TOO_SMALL (0xC00E0028).
SignatureMaxSize uint32 `idl:"name:dwSignatureMaxSize" json:"signature_max_size"`
}
QMSetMachinePropertiesSignProcRequest structure represents the S_DSQMSetMachinePropertiesSignProc operation request
func (*QMSetMachinePropertiesSignProcRequest) MarshalNDR ¶
func (*QMSetMachinePropertiesSignProcRequest) UnmarshalNDR ¶
type QMSetMachinePropertiesSignProcResponse ¶
type QMSetMachinePropertiesSignProcResponse struct {
// abSignature: MUST be set by the caller to a pointer to a buffer to contain the returned
// signature. MUST be set by the receiver to a signature over the challenge in abChallenge.
// The algorithm for creating this signature is specified by the following pseudocode.
Signature []byte `idl:"name:abSignature;size_is:(dwSignatureMaxSize);length_is:(pdwSignatureSize)" json:"signature"`
// pdwSignatureSize: Size in bytes of the signature in the abSignature parameter.
// MUST be set by the receiver to the actual length in bytes of the signature returned
// in abSignature on output.
SignatureSize uint32 `idl:"name:pdwSignatureSize" json:"signature_size"`
// Return: The S_DSQMSetMachinePropertiesSignProc return value.
Return int32 `idl:"name:Return" json:"return"`
}
QMSetMachinePropertiesSignProcResponse structure represents the S_DSQMSetMachinePropertiesSignProc operation response
func (*QMSetMachinePropertiesSignProcResponse) MarshalNDR ¶
func (*QMSetMachinePropertiesSignProcResponse) UnmarshalNDR ¶
type ServerAuthType ¶
type ServerAuthType dcetypes.ContextHandle
ServerAuthType structure represents PCONTEXT_HANDLE_SERVER_AUTH_TYPE RPC structure.
func (*ServerAuthType) ContextHandle ¶
func (o *ServerAuthType) ContextHandle() *dcetypes.ContextHandle
func (*ServerAuthType) MarshalNDR ¶
func (*ServerAuthType) UnmarshalNDR ¶
type SetObjectSecurityGUIDRequest ¶
type SetObjectSecurityGUIDRequest struct {
// dwObjectType: Specifies the type of object for which security properties are set.
// MUST be set to one of the object types specified in section 2.2.8.
ObjectType uint32 `idl:"name:dwObjectType" json:"object_type"`
// pGuid: MUST be set by the client to a pointer to the GUID of the object for which
// properties are to be set.
GUID *dtyp.GUID `idl:"name:pGuid" json:"guid"`
// SecurityInformation: MUST be set by the client to a bitwise mask specifying the information
// to set from the pSecurityDescriptor parameter. See the SecurityInformation parameter
// description in section 3.1.4.11.
SecurityInformation uint32 `idl:"name:SecurityInformation" json:"security_information"`
// pSecurityDescriptor: MUST contain a pointer to security descriptor, as specified
// in [MS-DTYP] section 2.4.6, or to an MQDS_PublicKey structure.<68> See the pSecurityDescriptor
// parameter description in section 3.1.4.11. Note that while section 3.1.4.11 indicates
// that pSecurityDescriptor contains a BLOBHEADER followed by an RSAPUBKEY (section
// 2.2.18) structure, this method actually contains an MQDS_PublicKey structure, which
// is the same structure prefixed by a 4-byte length field.
SecurityDescriptor []byte `idl:"name:pSecurityDescriptor;size_is:(nLength);pointer:unique" json:"security_descriptor"`
// nLength: MUST be set by the client to the length in bytes of the pSecurityDescriptor
// buffer.
Length uint32 `idl:"name:nLength" json:"length"`
}
SetObjectSecurityGUIDRequest structure represents the S_DSSetObjectSecurityGuid operation request
func (*SetObjectSecurityGUIDRequest) MarshalNDR ¶
func (*SetObjectSecurityGUIDRequest) UnmarshalNDR ¶
type SetObjectSecurityGUIDResponse ¶
type SetObjectSecurityGUIDResponse struct {
// Return: The S_DSSetObjectSecurityGuid return value.
Return int32 `idl:"name:Return" json:"return"`
}
SetObjectSecurityGUIDResponse structure represents the S_DSSetObjectSecurityGuid operation response
func (*SetObjectSecurityGUIDResponse) MarshalNDR ¶
func (*SetObjectSecurityGUIDResponse) UnmarshalNDR ¶
type SetObjectSecurityRequest ¶
type SetObjectSecurityRequest struct {
// dwObjectType: Specifies the type of object for which security properties are to be
// set. MUST be one of the object types specified in section 2.2.8.
ObjectType uint32 `idl:"name:dwObjectType" json:"object_type"`
// pwcsPathName: Pointer to a NULL-terminated 16-bit Unicode string that MUST contain
// the directory service pathname, as specified in section 2.2.9, of the object in the
// directory service.
PathName string `idl:"name:pwcsPathName;string" json:"path_name"`
// SecurityInformation: MUST be set by the client to a bitwise mask specifying the information
// to set from the pSecurityDescriptor parameter. See the SecurityInformation parameter
// description in section 3.1.4.11. Information in the pSecurityDescriptor parameter
// not associated with bits set in this field MUST be ignored.
SecurityInformation uint32 `idl:"name:SecurityInformation" json:"security_information"`
// pSecurityDescriptor: MUST contain a pointer to a security descriptor, as specified
// in [MS-DTYP] section 2.4.6, or to an MQDS_PublicKey structure.<63> See the pSecurityDescriptor
// parameter description in section 3.1.4.11. Note that where 3.1.4.11 indicates that
// pSecurityDescriptor contains a BLOBHEADER followed by an RSAPUBKEY (section 2.2.18)
// structure, this method actually contains an MQDS_PublicKey structure, which is the
// same structure prefixed by a 4-byte length field.
SecurityDescriptor []byte `idl:"name:pSecurityDescriptor;size_is:(nLength);pointer:unique" json:"security_descriptor"`
// nLength: MUST be set by the client to the length in bytes of the pSecurityDescriptor
// buffer.
Length uint32 `idl:"name:nLength" json:"length"`
}
SetObjectSecurityRequest structure represents the S_DSSetObjectSecurity operation request
func (*SetObjectSecurityRequest) MarshalNDR ¶
func (*SetObjectSecurityRequest) UnmarshalNDR ¶
type SetObjectSecurityResponse ¶
type SetObjectSecurityResponse struct {
// Return: The S_DSSetObjectSecurity return value.
Return int32 `idl:"name:Return" json:"return"`
}
SetObjectSecurityResponse structure represents the S_DSSetObjectSecurity operation response
func (*SetObjectSecurityResponse) MarshalNDR ¶
func (*SetObjectSecurityResponse) UnmarshalNDR ¶
type SetPropertiesGUIDRequest ¶
type SetPropertiesGUIDRequest struct {
// dwObjectType: Specifies the type of object for which properties are to be set.
// MUST be one of the object types specified in section 2.2.8.
ObjectType uint32 `idl:"name:dwObjectType" json:"object_type"`
// pGuid: Pointer to the GUID of the object for which properties are to be set.
GUID *dtyp.GUID `idl:"name:pGuid" json:"guid"`
// cp: MUST be set to the size (in elements) of the arrays aProp and apVar. The arrays
// aProp and apVar MUST have an identical number of elements and MUST contain at least
// one element.
CreatePartition uint32 `idl:"name:cp" json:"create_partition"`
// aProp: An array of identifiers of properties to associate with the object designated
// by pGuid. Each element MUST specify a value from the property identifiers table,
// as specified in section 2.2.10.1, for the object type specified in dwObjectType.
// Each element MUST specify the property identifier for the corresponding property
// value at the same element index in apVar. The array MUST contain at least one element.
Property []uint32 `idl:"name:aProp;size_is:(cp)" json:"property"`
// apVar: An array that specifies the property values to associate with the created
// object. Each element MUST specify the property value for the corresponding property
// identifier at the same element index in aProp. The array MUST contain at least one
// element.
Var []*mqmq.PropertyVariant `idl:"name:apVar;size_is:(cp)" json:"var"`
}
SetPropertiesGUIDRequest structure represents the S_DSSetPropsGuid operation request
func (*SetPropertiesGUIDRequest) MarshalNDR ¶
func (*SetPropertiesGUIDRequest) UnmarshalNDR ¶
type SetPropertiesGUIDResponse ¶
type SetPropertiesGUIDResponse struct {
// Return: The S_DSSetPropsGuid return value.
Return int32 `idl:"name:Return" json:"return"`
}
SetPropertiesGUIDResponse structure represents the S_DSSetPropsGuid operation response
func (*SetPropertiesGUIDResponse) MarshalNDR ¶
func (*SetPropertiesGUIDResponse) UnmarshalNDR ¶
type SetPropertiesRequest ¶
type SetPropertiesRequest struct {
// dwObjectType: MUST specify the type of object for which properties are to be set.
// For supported object types, see the table of object types specified in section 2.2.8.
ObjectType uint32 `idl:"name:dwObjectType" json:"object_type"`
// pwcsPathName: Pointer to a NULL-terminated 16-bit Unicode string that MUST contain
// the directory service pathname, as specified in section 2.2.9, to the object in the
// directory service.
PathName string `idl:"name:pwcsPathName;string" json:"path_name"`
// cp: MUST be set to the size (in elements) of the arrays aProp and apVar. The arrays
// aProp and apVar MUST have an identical number of elements and MUST contain at least
// one element.
CreatePartition uint32 `idl:"name:cp" json:"create_partition"`
// aProp: An array of identifiers of properties to associate with the object identified
// by pwcsPathName. Each element MUST specify a value from the property identifiers
// table defined in section 2.2.10.1 for the object type specified in dwObjectType.
// Each element MUST specify the property identifier for the corresponding property
// value at the same element index in apVar. The array MUST contain at least one element.
Property []uint32 `idl:"name:aProp;size_is:(cp)" json:"property"`
// apVar: An array that specifies the property values to associate with the object.
// Each element MUST specify the property value for the corresponding property identifier
// at the same element index in aProp. The array MUST contain at least one element.
Var []*mqmq.PropertyVariant `idl:"name:apVar;size_is:(cp)" json:"var"`
}
SetPropertiesRequest structure represents the S_DSSetProps operation request
func (*SetPropertiesRequest) MarshalNDR ¶
func (*SetPropertiesRequest) UnmarshalNDR ¶
type SetPropertiesResponse ¶
type SetPropertiesResponse struct {
// Return: The S_DSSetProps return value.
Return int32 `idl:"name:Return" json:"return"`
}
SetPropertiesResponse structure represents the S_DSSetProps operation response
func (*SetPropertiesResponse) MarshalNDR ¶
func (*SetPropertiesResponse) UnmarshalNDR ¶
type Type ¶
type Type dcetypes.ContextHandle
Type structure represents PCONTEXT_HANDLE_TYPE RPC structure.
func (*Type) ContextHandle ¶
func (o *Type) ContextHandle() *dcetypes.ContextHandle
type ValidateServerRequest ¶
type ValidateServerRequest struct {
// pguidEnterpriseId: MUST be set by the client to a pointer to the GUID of the enterprise
// that owns the server. The server SHOULD ignore it.<17>
EnterpriseID *dtyp.GUID `idl:"name:pguidEnterpriseId" json:"enterprise_id"`
// fSetupMode: Boolean value that defines the setup mode. Clients SHOULD set this
// value to FALSE (0x00000000). The server SHOULD ignore it.<18>
SetupMode bool `idl:"name:fSetupMode" json:"setup_mode"`
// dwContext: MUST be set by the client to a value that the client can use to correlate
// callbacks with the initial call to S_DSValidateServer. The server MUST supply this
// value in the dwContext parameter in the related calls of the S_InitSecCtx (section
// 3.2.4.3) callback method.
Context uint32 `idl:"name:dwContext" json:"context"`
// dwClientBuffMaxSize: MUST be set by the client to the size of the buffer pointed
// to by the pClientBuff parameter.
ClientBufferMaxSize uint32 `idl:"name:dwClientBuffMaxSize" json:"client_buffer_max_size"`
// pClientBuff: A pointer that MUST be set by the client to point to a buffer that contains
// the output_token from an initial call to GSS_Init_sec_context, as specified in [RFC2743]
// section 2.2.1.
ClientBuffer []byte `idl:"name:pClientBuff;size_is:(dwClientBuffMaxSize);length_is:(dwClientBuffSize)" json:"client_buffer"`
// dwClientBuffSize: MUST be set by the client to the size in bytes of the output_token
// within the client buffer pointed at by the pClientBuff parameter.
ClientBufferSize uint32 `idl:"name:dwClientBuffSize" json:"client_buffer_size"`
}
ValidateServerRequest structure represents the S_DSValidateServer operation request
func (*ValidateServerRequest) MarshalNDR ¶
func (*ValidateServerRequest) UnmarshalNDR ¶
type ValidateServerResponse ¶
type ValidateServerResponse struct {
// pphServerAuth: MUST be set by the server to a PCONTEXT_HANDLE_SERVER_AUTH_TYPE
// (section 2.2.5) RPC context handle.
ServerAuth *ServerAuthType `idl:"name:pphServerAuth" json:"server_auth"`
// Return: The S_DSValidateServer return value.
Return int32 `idl:"name:Return" json:"return"`
}
ValidateServerResponse structure represents the S_DSValidateServer operation response
func (*ValidateServerResponse) MarshalNDR ¶
func (*ValidateServerResponse) UnmarshalNDR ¶
Source Files
Click to show internal directories.
Click to hide internal directories.