eth

package
v0.0.0-...-220575c Latest Latest
Warning

This package is not in the latest version of its module.

Go to latest
Published: Mar 30, 2016 License: GPL-3.0 Imports: 42 Imported by: 0

Documentation

Overview

Package eth implements the Ethereum protocol.

Index

Constants

View Source
const (
	NetworkId          = 1
	ProtocolMaxMsgSize = 10 * 1024 * 1024 // Maximum cap on the size of a protocol message
)
View Source
const (
	// Protocol messages belonging to eth/61
	StatusMsg                   = 0x00
	NewBlockHashesMsg           = 0x01
	TxMsg                       = 0x02
	GetBlockHashesMsg           = 0x03
	BlockHashesMsg              = 0x04
	GetBlocksMsg                = 0x05
	BlocksMsg                   = 0x06
	NewBlockMsg                 = 0x07
	GetBlockHashesFromNumberMsg = 0x08

	// Protocol messages belonging to eth/62 (new protocol from scratch)
	// StatusMsg          = 0x00 (uncomment after eth/61 deprecation)
	// NewBlockHashesMsg  = 0x01 (uncomment after eth/61 deprecation)
	// TxMsg              = 0x02 (uncomment after eth/61 deprecation)
	GetBlockHeadersMsg = 0x03
	BlockHeadersMsg    = 0x04
	GetBlockBodiesMsg  = 0x05
	BlockBodiesMsg     = 0x06

	// Protocol messages belonging to eth/63
	GetNodeDataMsg = 0x0d
	NodeDataMsg    = 0x0e
	GetReceiptsMsg = 0x0f
	ReceiptsMsg    = 0x10
)

eth protocol message codes

View Source
const (
	ErrMsgTooLarge = iota
	ErrDecode
	ErrInvalidMsgCode
	ErrProtocolVersionMismatch
	ErrNetworkIdMismatch
	ErrGenesisBlockMismatch
	ErrNoStatusMsg
	ErrExtraStatusMsg
	ErrSuspendedPeer
)

Variables

View Source
var ProtocolLengths = []uint64{17, 8, 9}

Number of implemented message corresponding to different protocol versions.

View Source
var ProtocolName = "eth"

Official short name of the protocol used during capability negotiation.

View Source
var ProtocolVersions = []uint{eth63, eth62, eth61}

Supported versions of the eth protocol (first is primary).

Functions

func GPUBench

func GPUBench(gpuid uint64)

func PrintOpenCLDevices

func PrintOpenCLDevices()

Types

type BlockTraceResult

type BlockTraceResult struct {
	Validated  bool           `json: "validated"`
	StructLogs []structLogRes `json:"structLogs"`
	Error      error          `json:"error"`
}

BlockTraceResults is the returned value when replaying a block to check for consensus results and full VM trace logs for all included transactions.

type CallArgs

type CallArgs struct {
	From     common.Address  `json:"from"`
	To       *common.Address `json:"to"`
	Gas      rpc.HexNumber   `json:"gas"`
	GasPrice rpc.HexNumber   `json:"gasPrice"`
	Value    rpc.HexNumber   `json:"value"`
	Data     string          `json:"data"`
}

type Config

type Config struct {
	NetworkId int    // Network ID to use for selecting peers to connect to
	Genesis   string // Genesis JSON to seed the chain database with
	FastSync  bool   // Enables the state download based fast synchronisation algorithm

	BlockChainVersion  int
	SkipBcVersionCheck bool // e.g. blockchain export
	DatabaseCache      int
	DatabaseHandles    int

	NatSpec   bool
	DocRoot   string
	AutoDAG   bool
	PowTest   bool
	PowShared bool
	ExtraData []byte

	AccountManager *accounts.Manager
	Etherbase      common.Address
	GasPrice       *big.Int
	MinerThreads   int
	SolcPath       string

	GpoMinGasPrice          *big.Int
	GpoMaxGasPrice          *big.Int
	GpoFullBlockRatio       int
	GpobaseStepDown         int
	GpobaseStepUp           int
	GpobaseCorrectionFactor int

	EnableJit bool
	ForceJit  bool

	TestGenesisBlock *types.Block   // Genesis block to seed the chain database with (testing only!)
	TestGenesisState ethdb.Database // Genesis state to seed the database with (testing only!)
}

type EthNodeInfo

type EthNodeInfo struct {
	Network    int         `json:"network"`    // Ethereum network ID (0=Olympic, 1=Frontier, 2=Morden)
	Difficulty *big.Int    `json:"difficulty"` // Total difficulty of the host's blockchain
	Genesis    common.Hash `json:"genesis"`    // SHA3 hash of the host's genesis block
	Head       common.Hash `json:"head"`       // SHA3 hash of the host's best owned block
}

EthNodeInfo represents a short summary of the Ethereum sub-protocol metadata known about the host peer.

type Ethereum

type Ethereum struct {
	SolcPath string

	GpoMinGasPrice          *big.Int
	GpoMaxGasPrice          *big.Int
	GpoFullBlockRatio       int
	GpobaseStepDown         int
	GpobaseStepUp           int
	GpobaseCorrectionFactor int

	Mining       bool
	MinerThreads int
	NatSpec      bool
	AutoDAG      bool
	PowTest      bool
	// contains filtered or unexported fields
}

func New

func New(ctx *node.ServiceContext, config *Config) (*Ethereum, error)

func (*Ethereum) APIs

func (s *Ethereum) APIs() []rpc.API

APIs returns the collection of RPC services the ethereum package offers. NOTE, some of these services probably need to be moved to somewhere else.

func (*Ethereum) AccountManager

func (s *Ethereum) AccountManager() *accounts.Manager

func (*Ethereum) BlockChain

func (s *Ethereum) BlockChain() *core.BlockChain

func (*Ethereum) ChainDb

func (s *Ethereum) ChainDb() ethdb.Database

func (*Ethereum) DappDb

func (s *Ethereum) DappDb() ethdb.Database

func (*Ethereum) Downloader

func (s *Ethereum) Downloader() *downloader.Downloader

func (*Ethereum) EthVersion

func (s *Ethereum) EthVersion() int

func (*Ethereum) Etherbase

func (s *Ethereum) Etherbase() (eb common.Address, err error)

func (*Ethereum) EventMux

func (s *Ethereum) EventMux() *event.TypeMux

func (*Ethereum) HTTPClient

func (self *Ethereum) HTTPClient() *httpclient.HTTPClient

HTTPClient returns the light http client used for fetching offchain docs (natspec, source for verification)

func (*Ethereum) IsListening

func (s *Ethereum) IsListening() bool

func (*Ethereum) IsMining

func (s *Ethereum) IsMining() bool

func (*Ethereum) Miner

func (s *Ethereum) Miner() *miner.Miner

func (*Ethereum) NetVersion

func (s *Ethereum) NetVersion() int

func (*Ethereum) Protocols

func (s *Ethereum) Protocols() []p2p.Protocol

Protocols implements node.Service, returning all the currently configured network protocols to start.

func (*Ethereum) ResetWithGenesisBlock

func (s *Ethereum) ResetWithGenesisBlock(gb *types.Block)

func (*Ethereum) SetEtherbase

func (self *Ethereum) SetEtherbase(etherbase common.Address)

set in js console via admin interface or wrapper from cli flags

func (*Ethereum) SetSolc

func (self *Ethereum) SetSolc(solcPath string) (*compiler.Solidity, error)

set in js console via admin interface or wrapper from cli flags

func (*Ethereum) Solc

func (self *Ethereum) Solc() (*compiler.Solidity, error)

func (*Ethereum) Start

func (s *Ethereum) Start(srvr *p2p.Server) error

Start implements node.Service, starting all internal goroutines needed by the Ethereum protocol implementation.

func (*Ethereum) StartAutoDAG

func (self *Ethereum) StartAutoDAG()

StartAutoDAG() spawns a go routine that checks the DAG every autoDAGcheckInterval by default that is 10 times per epoch in epoch n, if we past autoDAGepochHeight within-epoch blocks, it calls ethash.MakeDAG to pregenerate the DAG for the next epoch n+1 if it does not exist yet as well as remove the DAG for epoch n-1 the loop quits if autodagquit channel is closed, it can safely restart and stop any number of times. For any more sophisticated pattern of DAG generation, use CLI subcommand makedag

func (*Ethereum) StartMining

func (s *Ethereum) StartMining(threads int, gpus string) error

func (*Ethereum) Stop

func (s *Ethereum) Stop() error

Stop implements node.Service, terminating all internal goroutines used by the Ethereum protocol.

func (*Ethereum) StopAutoDAG

func (self *Ethereum) StopAutoDAG()

stopAutoDAG stops automatic DAG pregeneration by quitting the loop

func (*Ethereum) StopMining

func (s *Ethereum) StopMining()

func (*Ethereum) TxPool

func (s *Ethereum) TxPool() *core.TxPool

func (*Ethereum) WaitForShutdown

func (s *Ethereum) WaitForShutdown()

This function will wait for a shutdown and resumes main thread execution

type ExecutionResult

type ExecutionResult struct {
	Gas         *big.Int       `json:"gas"`
	ReturnValue string         `json:"returnValue"`
	StructLogs  []structLogRes `json:"structLogs"`
}

ExecutionResult groups all structured logs emitted by the EVM while replaying a transaction in debug mode as well as the amount of gas used and the return value

type GasPriceOracle

type GasPriceOracle struct {
	// contains filtered or unexported fields
}

GasPriceOracle recommends gas prices based on the content of recent blocks.

func NewGasPriceOracle

func NewGasPriceOracle(eth *Ethereum) *GasPriceOracle

NewGasPriceOracle returns a new oracle.

func (*GasPriceOracle) SuggestPrice

func (self *GasPriceOracle) SuggestPrice() *big.Int

SuggestPrice returns the recommended gas price.

type NewBlocksArgs

type NewBlocksArgs struct {
	IncludeTransactions bool `json:"includeTransactions"`
	TransactionDetails  bool `json:"transactionDetails"`
}

NewBlocksArgs allows the user to specify if the returned block should include transactions and in which format.

type PeerInfo

type PeerInfo struct {
	Version    int      `json:"version"`    // Ethereum protocol version negotiated
	Difficulty *big.Int `json:"difficulty"` // Total difficulty of the peer's blockchain
	Head       string   `json:"head"`       // SHA3 hash of the peer's best owned block
}

PeerInfo represents a short summary of the Ethereum sub-protocol metadata known about a connected peer.

type PrivateAccountAPI

type PrivateAccountAPI struct {
	// contains filtered or unexported fields
}

PrivateAccountAPI provides an API to access accounts managed by this node. It offers methods to create, (un)lock en list accounts.

func NewPrivateAccountAPI

func NewPrivateAccountAPI(am *accounts.Manager) *PrivateAccountAPI

NewPrivateAccountAPI create a new PrivateAccountAPI.

func (*PrivateAccountAPI) ListAccounts

func (s *PrivateAccountAPI) ListAccounts() ([]common.Address, error)

ListAccounts will return a list of addresses for accounts this node manages.

func (*PrivateAccountAPI) LockAccount

func (s *PrivateAccountAPI) LockAccount(addr common.Address) bool

LockAccount will lock the account associated with the given address when it's unlocked.

func (*PrivateAccountAPI) NewAccount

func (s *PrivateAccountAPI) NewAccount(password string) (common.Address, error)

NewAccount will create a new account and returns the address for the new account.

func (*PrivateAccountAPI) UnlockAccount

func (s *PrivateAccountAPI) UnlockAccount(addr common.Address, password string, duration int) bool

UnlockAccount will unlock the account associated with the given address with the given password for duration seconds. It returns an indication if the action was successful.

type PrivateAdminAPI

type PrivateAdminAPI struct {
	// contains filtered or unexported fields
}

PrivateAdminAPI is the collection of Etheruem APIs exposed over the private admin endpoint.

func NewPrivateAdminAPI

func NewPrivateAdminAPI(eth *Ethereum) *PrivateAdminAPI

NewPrivateAdminAPI creates a new API definition for the private admin methods of the Ethereum service.

func (*PrivateAdminAPI) ExportChain

func (api *PrivateAdminAPI) ExportChain(file string) (bool, error)

ExportChain exports the current blockchain into a local file.

func (*PrivateAdminAPI) ImportChain

func (api *PrivateAdminAPI) ImportChain(file string) (bool, error)

ImportChain imports a blockchain from a local file.

func (*PrivateAdminAPI) SetSolc

func (api *PrivateAdminAPI) SetSolc(path string) (string, error)

SetSolc sets the Solidity compiler path to be used by the node.

type PrivateDebugAPI

type PrivateDebugAPI struct {
	// contains filtered or unexported fields
}

PrivateDebugAPI is the collection of Etheruem APIs exposed over the private debugging endpoint.

func NewPrivateDebugAPI

func NewPrivateDebugAPI(eth *Ethereum) *PrivateDebugAPI

NewPrivateDebugAPI creates a new API definition for the private debug methods of the Ethereum service.

func (*PrivateDebugAPI) SetHead

func (api *PrivateDebugAPI) SetHead(number uint64)

SetHead rewinds the head of the blockchain to a previous block.

func (*PrivateDebugAPI) TraceBlock

func (api *PrivateDebugAPI) TraceBlock(blockRlp []byte, config vm.Config) BlockTraceResult

TraceBlock processes the given block's RLP but does not import the block in to the chain.

func (*PrivateDebugAPI) TraceBlockByHash

func (api *PrivateDebugAPI) TraceBlockByHash(hash common.Hash, config vm.Config) BlockTraceResult

TraceBlockByHash processes the block by hash.

func (*PrivateDebugAPI) TraceBlockByNumber

func (api *PrivateDebugAPI) TraceBlockByNumber(number uint64, config vm.Config) BlockTraceResult

TraceProcessBlock processes the block by canonical block number.

func (*PrivateDebugAPI) TraceBlockFromFile

func (api *PrivateDebugAPI) TraceBlockFromFile(file string, config vm.Config) BlockTraceResult

TraceBlockFromFile loads the block's RLP from the given file name and attempts to process it but does not import the block in to the chain.

func (*PrivateDebugAPI) TraceTransaction

func (s *PrivateDebugAPI) TraceTransaction(txHash common.Hash, logger vm.LogConfig) (*ExecutionResult, error)

TraceTransaction returns the structured logs created during the execution of EVM and returns them as a JSON object.

type PrivateMinerAPI

type PrivateMinerAPI struct {
	// contains filtered or unexported fields
}

PrivateMinerAPI provides private RPC methods to control the miner. These methods can be abused by external users and must be considered insecure for use by untrusted users.

func NewPrivateMinerAPI

func NewPrivateMinerAPI(e *Ethereum) *PrivateMinerAPI

NewPrivateMinerAPI create a new RPC service which controls the miner of this node.

func (*PrivateMinerAPI) MakeDAG

func (s *PrivateMinerAPI) MakeDAG(blockNr rpc.BlockNumber) (bool, error)

MakeDAG creates the new DAG for the given block number

func (*PrivateMinerAPI) SetEtherbase

func (s *PrivateMinerAPI) SetEtherbase(etherbase common.Address) bool

SetEtherbase sets the etherbase of the miner

func (*PrivateMinerAPI) SetExtra

func (s *PrivateMinerAPI) SetExtra(extra string) (bool, error)

SetExtra sets the extra data string that is included when this miner mines a block.

func (*PrivateMinerAPI) SetGasPrice

func (s *PrivateMinerAPI) SetGasPrice(gasPrice rpc.Number) bool

SetGasPrice sets the minimum accepted gas price for the miner.

func (*PrivateMinerAPI) Start

func (s *PrivateMinerAPI) Start(threads rpc.HexNumber) (bool, error)

Start the miner with the given number of threads

func (*PrivateMinerAPI) StartAutoDAG

func (s *PrivateMinerAPI) StartAutoDAG() bool

StartAutoDAG starts auto DAG generation. This will prevent the DAG generating on epoch change which will cause the node to stop mining during the generation process.

func (*PrivateMinerAPI) Stop

func (s *PrivateMinerAPI) Stop() bool

Stop the miner

func (*PrivateMinerAPI) StopAutoDAG

func (s *PrivateMinerAPI) StopAutoDAG() bool

StopAutoDAG stops auto DAG generation

type ProtocolManager

type ProtocolManager struct {
	SubProtocols []p2p.Protocol
	// contains filtered or unexported fields
}

func NewProtocolManager

func NewProtocolManager(fastSync bool, networkId int, mux *event.TypeMux, txpool txPool, pow pow.PoW, blockchain *core.BlockChain, chaindb ethdb.Database) (*ProtocolManager, error)

NewProtocolManager returns a new ethereum sub protocol manager. The Ethereum sub protocol manages peers capable with the ethereum network.

func (*ProtocolManager) BroadcastBlock

func (pm *ProtocolManager) BroadcastBlock(block *types.Block, propagate bool)

BroadcastBlock will either propagate a block to a subset of it's peers, or will only announce it's availability (depending what's requested).

func (*ProtocolManager) BroadcastTx

func (pm *ProtocolManager) BroadcastTx(hash common.Hash, tx *types.Transaction)

BroadcastTx will propagate a transaction to all peers which are not known to already have the given transaction.

func (*ProtocolManager) NodeInfo

func (self *ProtocolManager) NodeInfo() *EthNodeInfo

NodeInfo retrieves some protocol metadata about the running host node.

func (*ProtocolManager) Start

func (pm *ProtocolManager) Start()

func (*ProtocolManager) Stop

func (pm *ProtocolManager) Stop()

type PublicAccountAPI

type PublicAccountAPI struct {
	// contains filtered or unexported fields
}

PublicAccountAPI provides an API to access accounts managed by this node. It offers only methods that can retrieve accounts.

func NewPublicAccountAPI

func NewPublicAccountAPI(am *accounts.Manager) *PublicAccountAPI

NewPublicAccountAPI creates a new PublicAccountAPI.

func (*PublicAccountAPI) Accounts

func (s *PublicAccountAPI) Accounts() ([]accounts.Account, error)

Accounts returns the collection of accounts this node manages

type PublicBlockChainAPI

type PublicBlockChainAPI struct {
	// contains filtered or unexported fields
}

PublicBlockChainAPI provides an API to access the Ethereum blockchain. It offers only methods that operate on public data that is freely available to anyone.

func NewPublicBlockChainAPI

func NewPublicBlockChainAPI(bc *core.BlockChain, m *miner.Miner, chainDb ethdb.Database, eventMux *event.TypeMux, am *accounts.Manager) *PublicBlockChainAPI

NewPublicBlockChainAPI creates a new Etheruem blockchain API.

func (*PublicBlockChainAPI) BlockNumber

func (s *PublicBlockChainAPI) BlockNumber() *big.Int

BlockNumber returns the block number of the chain head.

func (*PublicBlockChainAPI) Call

func (s *PublicBlockChainAPI) Call(args CallArgs, blockNr rpc.BlockNumber) (string, error)

Call executes the given transaction on the state for the given block number. It doesn't make and changes in the state/blockchain and is useful to execute and retrieve values.

func (*PublicBlockChainAPI) EstimateGas

func (s *PublicBlockChainAPI) EstimateGas(args CallArgs) (*rpc.HexNumber, error)

EstimateGas returns an estimate of the amount of gas needed to execute the given transaction.

func (*PublicBlockChainAPI) GetBalance

func (s *PublicBlockChainAPI) GetBalance(address common.Address, blockNr rpc.BlockNumber) (*big.Int, error)

GetBalance returns the amount of wei for the given address in the state of the given block number. The rpc.LatestBlockNumber and rpc.PendingBlockNumber meta block numbers are also allowed.

func (*PublicBlockChainAPI) GetBlockByHash

func (s *PublicBlockChainAPI) GetBlockByHash(blockHash common.Hash, fullTx bool) (map[string]interface{}, error)

GetBlockByHash returns the requested block. When fullTx is true all transactions in the block are returned in full detail, otherwise only the transaction hash is returned.

func (*PublicBlockChainAPI) GetBlockByNumber

func (s *PublicBlockChainAPI) GetBlockByNumber(blockNr rpc.BlockNumber, fullTx bool) (map[string]interface{}, error)

GetBlockByNumber returns the requested block. When blockNr is -1 the chain head is returned. When fullTx is true all transactions in the block are returned in full detail, otherwise only the transaction hash is returned.

func (*PublicBlockChainAPI) GetCode

func (s *PublicBlockChainAPI) GetCode(address common.Address, blockNr rpc.BlockNumber) (string, error)

GetCode returns the code stored at the given address in the state for the given block number.

func (*PublicBlockChainAPI) GetStorageAt

func (s *PublicBlockChainAPI) GetStorageAt(address common.Address, key string, blockNr rpc.BlockNumber) (string, error)

GetStorageAt returns the storage from the state at the given address, key and block number. The rpc.LatestBlockNumber and rpc.PendingBlockNumber meta block numbers are also allowed.

func (*PublicBlockChainAPI) GetUncleByBlockHashAndIndex

func (s *PublicBlockChainAPI) GetUncleByBlockHashAndIndex(blockHash common.Hash, index rpc.HexNumber) (map[string]interface{}, error)

GetUncleByBlockHashAndIndex returns the uncle block for the given block hash and index. When fullTx is true all transactions in the block are returned in full detail, otherwise only the transaction hash is returned.

func (*PublicBlockChainAPI) GetUncleByBlockNumberAndIndex

func (s *PublicBlockChainAPI) GetUncleByBlockNumberAndIndex(blockNr rpc.BlockNumber, index rpc.HexNumber) (map[string]interface{}, error)

GetUncleByBlockNumberAndIndex returns the uncle block for the given block hash and index. When fullTx is true all transactions in the block are returned in full detail, otherwise only the transaction hash is returned.

func (*PublicBlockChainAPI) GetUncleCountByBlockHash

func (s *PublicBlockChainAPI) GetUncleCountByBlockHash(blockHash common.Hash) *rpc.HexNumber

GetUncleCountByBlockHash returns number of uncles in the block for the given block hash

func (*PublicBlockChainAPI) GetUncleCountByBlockNumber

func (s *PublicBlockChainAPI) GetUncleCountByBlockNumber(blockNr rpc.BlockNumber) *rpc.HexNumber

GetUncleCountByBlockNumber returns number of uncles in the block for the given block number

func (*PublicBlockChainAPI) NewBlocks

func (s *PublicBlockChainAPI) NewBlocks(args NewBlocksArgs) (rpc.Subscription, error)

NewBlocks triggers a new block event each time a block is appended to the chain. It accepts an argument which allows the caller to specify whether the output should contain transactions and in what format.

func (*PublicBlockChainAPI) TraceCall

func (s *PublicBlockChainAPI) TraceCall(args CallArgs, blockNr rpc.BlockNumber) (*ExecutionResult, error)

type PublicDebugAPI

type PublicDebugAPI struct {
	// contains filtered or unexported fields
}

PublicDebugAPI is the collection of Etheruem APIs exposed over the public debugging endpoint.

func NewPublicDebugAPI

func NewPublicDebugAPI(eth *Ethereum) *PublicDebugAPI

NewPublicDebugAPI creates a new API definition for the public debug methods of the Ethereum service.

func (*PublicDebugAPI) DumpBlock

func (api *PublicDebugAPI) DumpBlock(number uint64) (state.World, error)

DumpBlock retrieves the entire state of the database at a given block.

func (*PublicDebugAPI) GetBlockRlp

func (api *PublicDebugAPI) GetBlockRlp(number uint64) (string, error)

GetBlockRlp retrieves the RLP encoded for of a single block.

func (*PublicDebugAPI) PrintBlock

func (api *PublicDebugAPI) PrintBlock(number uint64) (string, error)

PrintBlock retrieves a block and returns its pretty printed form.

func (*PublicDebugAPI) SeedHash

func (api *PublicDebugAPI) SeedHash(number uint64) (string, error)

SeedHash retrieves the seed hash of a block.

type PublicEthereumAPI

type PublicEthereumAPI struct {
	// contains filtered or unexported fields
}

PublicEthereumAPI provides an API to access Ethereum related information. It offers only methods that operate on public data that is freely available to anyone.

func NewPublicEthereumAPI

func NewPublicEthereumAPI(e *Ethereum) *PublicEthereumAPI

NewPublicEthereumAPI creates a new Ethereum protocol API.

func (*PublicEthereumAPI) Coinbase

func (s *PublicEthereumAPI) Coinbase() (common.Address, error)

see Etherbase

func (*PublicEthereumAPI) CompileSolidity

func (s *PublicEthereumAPI) CompileSolidity(source string) (map[string]*compiler.Contract, error)

CompileSolidity compiles the given solidity source

func (*PublicEthereumAPI) Etherbase

func (s *PublicEthereumAPI) Etherbase() (common.Address, error)

Etherbase is the address that mining rewards will be send to

func (*PublicEthereumAPI) GasPrice

func (s *PublicEthereumAPI) GasPrice() *big.Int

GasPrice returns a suggestion for a gas price.

func (*PublicEthereumAPI) GetCompilers

func (s *PublicEthereumAPI) GetCompilers() ([]string, error)

GetCompilers returns the collection of available smart contract compilers

func (*PublicEthereumAPI) Hashrate

func (s *PublicEthereumAPI) Hashrate() *rpc.HexNumber

Hashrate returns the POW hashrate

func (*PublicEthereumAPI) ProtocolVersion

func (s *PublicEthereumAPI) ProtocolVersion() *rpc.HexNumber

ProtocolVersion returns the current Ethereum protocol version this node supports

func (*PublicEthereumAPI) Syncing

func (s *PublicEthereumAPI) Syncing() (interface{}, error)

Syncing returns false in case the node is currently not syncing with the network. It can be up to date or has not yet received the latest block headers from its pears. In case it is synchronizing: - startingBlock: block number this node started to synchronise from - currentBlock: block number this node is currently importing - highestBlock: block number of the highest block header this node has received from peers - pulledStates: number of state entries processed until now - knownStates: number of known state entries that still need to be pulled

type PublicMinerAPI

type PublicMinerAPI struct {
	// contains filtered or unexported fields
}

PublicMinerAPI provides an API to control the miner. It offers only methods that operate on data that pose no security risk when it is publicly accessible.

func NewPublicMinerAPI

func NewPublicMinerAPI(e *Ethereum) *PublicMinerAPI

NewPublicMinerAPI create a new PublicMinerAPI instance.

func (*PublicMinerAPI) GetWork

func (s *PublicMinerAPI) GetWork() ([]string, error)

GetWork returns a work package for external miner. The work package consists of 3 strings result[0], 32 bytes hex encoded current block header pow-hash result[1], 32 bytes hex encoded seed hash used for DAG result[2], 32 bytes hex encoded boundary condition ("target"), 2^256/difficulty

func (*PublicMinerAPI) Mining

func (s *PublicMinerAPI) Mining() bool

Mining returns an indication if this node is currently mining.

func (*PublicMinerAPI) SubmitHashrate

func (s *PublicMinerAPI) SubmitHashrate(hashrate rpc.HexNumber, id common.Hash) bool

SubmitHashrate can be used for remote miners to submit their hash rate. This enables the node to report the combined hash rate of all miners which submit work through this node. It accepts the miner hash rate and an identifier which must be unique between nodes.

func (*PublicMinerAPI) SubmitWork

func (s *PublicMinerAPI) SubmitWork(nonce rpc.HexNumber, solution, digest common.Hash) bool

SubmitWork can be used by external miner to submit their POW solution. It returns an indication if the work was accepted. Note, this is not an indication if the provided work was valid!

type PublicNetAPI

type PublicNetAPI struct {
	// contains filtered or unexported fields
}

PublicNetAPI offers network related RPC methods

func NewPublicNetAPI

func NewPublicNetAPI(net *p2p.Server, networkVersion int) *PublicNetAPI

NewPublicNetAPI creates a new net API instance.

func (*PublicNetAPI) Listening

func (s *PublicNetAPI) Listening() bool

Listening returns an indication if the node is listening for network connections.

func (*PublicNetAPI) PeerCount

func (s *PublicNetAPI) PeerCount() *rpc.HexNumber

Peercount returns the number of connected peers

func (*PublicNetAPI) Version

func (s *PublicNetAPI) Version() string

ProtocolVersion returns the current ethereum protocol version.

type PublicTransactionPoolAPI

type PublicTransactionPoolAPI struct {
	// contains filtered or unexported fields
}

PublicTransactionPoolAPI exposes methods for the RPC interface

func NewPublicTransactionPoolAPI

func NewPublicTransactionPoolAPI(e *Ethereum) *PublicTransactionPoolAPI

NewPublicTransactionPoolAPI creates a new RPC service with methods specific for the transaction pool.

func (*PublicTransactionPoolAPI) GetBlockTransactionCountByHash

func (s *PublicTransactionPoolAPI) GetBlockTransactionCountByHash(blockHash common.Hash) *rpc.HexNumber

GetBlockTransactionCountByHash returns the number of transactions in the block with the given hash.

func (*PublicTransactionPoolAPI) GetBlockTransactionCountByNumber

func (s *PublicTransactionPoolAPI) GetBlockTransactionCountByNumber(blockNr rpc.BlockNumber) *rpc.HexNumber

GetBlockTransactionCountByNumber returns the number of transactions in the block with the given block number.

func (*PublicTransactionPoolAPI) GetTransactionByBlockHashAndIndex

func (s *PublicTransactionPoolAPI) GetTransactionByBlockHashAndIndex(blockHash common.Hash, index rpc.HexNumber) (*RPCTransaction, error)

GetTransactionByBlockHashAndIndex returns the transaction for the given block hash and index.

func (*PublicTransactionPoolAPI) GetTransactionByBlockNumberAndIndex

func (s *PublicTransactionPoolAPI) GetTransactionByBlockNumberAndIndex(blockNr rpc.BlockNumber, index rpc.HexNumber) (*RPCTransaction, error)

GetTransactionByBlockNumberAndIndex returns the transaction for the given block number and index.

func (*PublicTransactionPoolAPI) GetTransactionByHash

func (s *PublicTransactionPoolAPI) GetTransactionByHash(txHash common.Hash) (*RPCTransaction, error)

GetTransactionByHash returns the transaction for the given hash

func (*PublicTransactionPoolAPI) GetTransactionCount

func (s *PublicTransactionPoolAPI) GetTransactionCount(address common.Address, blockNr rpc.BlockNumber) (*rpc.HexNumber, error)

GetTransactionCount returns the number of transactions the given address has sent for the given block number

func (*PublicTransactionPoolAPI) GetTransactionReceipt

func (s *PublicTransactionPoolAPI) GetTransactionReceipt(txHash common.Hash) (map[string]interface{}, error)

GetTransactionReceipt returns the transaction receipt for the given transaction hash.

func (*PublicTransactionPoolAPI) NewPendingTransactions

func (s *PublicTransactionPoolAPI) NewPendingTransactions() (rpc.Subscription, error)

NewPendingTransaction creates a subscription that is triggered each time a transaction enters the transaction pool and is send from one of the transactions this nodes manages.

func (*PublicTransactionPoolAPI) PendingTransactions

func (s *PublicTransactionPoolAPI) PendingTransactions() ([]*RPCTransaction, error)

PendingTransactions returns the transactions that are in the transaction pool and have a from address that is one of the accounts this node manages.

func (*PublicTransactionPoolAPI) Resend

func (s *PublicTransactionPoolAPI) Resend(tx *Tx, gasPrice, gasLimit *rpc.HexNumber) (common.Hash, error)

Resend accepts an existing transaction and a new gas price and limit. It will remove the given transaction from the pool and reinsert it with the new gas price and limit.

func (*PublicTransactionPoolAPI) SendRawTransaction

func (s *PublicTransactionPoolAPI) SendRawTransaction(encodedTx string) (string, error)

SendRawTransaction will add the signed transaction to the transaction pool. The sender is responsible for signing the transaction and using the correct nonce.

func (*PublicTransactionPoolAPI) SendTransaction

func (s *PublicTransactionPoolAPI) SendTransaction(args SendTxArgs) (common.Hash, error)

SendTransaction will create a transaction for the given transaction argument, sign it and submit it to the transaction pool.

func (*PublicTransactionPoolAPI) Sign

func (s *PublicTransactionPoolAPI) Sign(address common.Address, data string) (string, error)

Sign will sign the given data string with the given address. The account corresponding with the address needs to be unlocked.

func (*PublicTransactionPoolAPI) SignTransaction

SignTransaction will sign the given transaction with the from account. The node needs to have the private key of the account corresponding with the given from address and it needs to be unlocked.

type PublicTxPoolAPI

type PublicTxPoolAPI struct {
	// contains filtered or unexported fields
}

PublicTxPoolAPI offers and API for the transaction pool. It only operates on data that is non confidential.

func NewPublicTxPoolAPI

func NewPublicTxPoolAPI(e *Ethereum) *PublicTxPoolAPI

NewPublicTxPoolAPI creates a new tx pool service that gives information about the transaction pool.

func (*PublicTxPoolAPI) Content

func (s *PublicTxPoolAPI) Content() map[string]map[string]map[string][]*RPCTransaction

Content returns the transactions contained within the transaction pool.

func (*PublicTxPoolAPI) Inspect

func (s *PublicTxPoolAPI) Inspect() map[string]map[string]map[string][]string

Inspect retrieves the content of the transaction pool and flattens it into an easily inspectable list.

func (*PublicTxPoolAPI) Status

func (s *PublicTxPoolAPI) Status() map[string]*rpc.HexNumber

Status returns the number of pending and queued transaction in the pool.

type RPCTransaction

type RPCTransaction struct {
	BlockHash        common.Hash     `json:"blockHash"`
	BlockNumber      *rpc.HexNumber  `json:"blockNumber"`
	From             common.Address  `json:"from"`
	Gas              *rpc.HexNumber  `json:"gas"`
	GasPrice         *rpc.HexNumber  `json:"gasPrice"`
	Hash             common.Hash     `json:"hash"`
	Input            string          `json:"input"`
	Nonce            *rpc.HexNumber  `json:"nonce"`
	To               *common.Address `json:"to"`
	TransactionIndex *rpc.HexNumber  `json:"transactionIndex"`
	Value            *rpc.HexNumber  `json:"value"`
}

RPCTransaction represents a transaction that will serialize to the RPC representation of a transaction

type SendTxArgs

type SendTxArgs struct {
	From     common.Address  `json:"from"`
	To       *common.Address `json:"to"`
	Gas      *rpc.HexNumber  `json:"gas"`
	GasPrice *rpc.HexNumber  `json:"gasPrice"`
	Value    *rpc.HexNumber  `json:"value"`
	Data     string          `json:"data"`
	Nonce    *rpc.HexNumber  `json:"nonce"`
}

type SignTransactionArgs

type SignTransactionArgs struct {
	From     common.Address
	To       *common.Address
	Nonce    *rpc.HexNumber
	Value    *rpc.HexNumber
	Gas      *rpc.HexNumber
	GasPrice *rpc.HexNumber
	Data     string

	BlockNumber int64
}

type SignTransactionResult

type SignTransactionResult struct {
	Raw string `json:"raw"`
	Tx  *Tx    `json:"tx"`
}

type TraceCollector

type TraceCollector struct {
	// contains filtered or unexported fields
}

TraceCollector collects EVM structered logs.

TraceCollector implements vm.Collector

func (*TraceCollector) AddStructLog

func (t *TraceCollector) AddStructLog(slog vm.StructLog)

AddStructLog adds a structered log.

type Tx

type Tx struct {
	To       *common.Address `json:"to"`
	From     common.Address  `json:"from"`
	Nonce    *rpc.HexNumber  `json:"nonce"`
	Value    *rpc.HexNumber  `json:"value"`
	Data     string          `json:"data"`
	GasLimit *rpc.HexNumber  `json:"gas"`
	GasPrice *rpc.HexNumber  `json:"gasPrice"`
	Hash     common.Hash     `json:"hash"`
	// contains filtered or unexported fields
}

Tx is a helper object for argument and return values

func (*Tx) UnmarshalJSON

func (tx *Tx) UnmarshalJSON(b []byte) (err error)

type VmLoggerOptions

type VmLoggerOptions struct {
	DisableMemory  bool // disable memory capture
	DisableStack   bool // disable stack capture
	DisableStorage bool // disable storage capture
	FullStorage    bool // show full storage (slow)
}

VmLoggerOptions are the options used for debugging transactions and capturing specific data.

Directories

Path Synopsis
Package downloader contains the manual full chain synchronisation.
Package downloader contains the manual full chain synchronisation.
Package fetcher contains the block announcement based synchronisation.
Package fetcher contains the block announcement based synchronisation.
package filters implements an ethereum filtering system for block, transactions and log events.
package filters implements an ethereum filtering system for block, transactions and log events.

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL