Documentation
¶
Index ¶
- Constants
- type AddressWithCapabilities
- type Blockqueuer
- type CommandType
- type DefaultDiscovery
- func (d *DefaultDiscovery) BackFill(addrs ...string)
- func (d *DefaultDiscovery) BadPeers() []string
- func (d *DefaultDiscovery) Close()
- func (d *DefaultDiscovery) GoodPeers() []AddressWithCapabilities
- func (d *DefaultDiscovery) PoolCount() int
- func (d *DefaultDiscovery) RegisterBadAddr(addr string)
- func (d *DefaultDiscovery) RegisterConnectedAddr(addr string)
- func (d *DefaultDiscovery) RegisterGoodAddr(s string, c capability.Capabilities)
- func (d *DefaultDiscovery) RequestRemote(n int)
- func (d *DefaultDiscovery) UnconnectedPeers() []string
- func (d *DefaultDiscovery) UnregisterConnectedAddr(s string)
- type Discoverer
- type Ledger
- type Message
- type MessageFlag
- type NotaryFeer
- type Peer
- type Server
- func (s *Server) AddExtensibleHPService(svc Service, category string, handler func(*payload.Extensible) error, ...)
- func (s *Server) AddExtensibleService(svc Service, category string, handler func(*payload.Extensible) error)
- func (s *Server) AddService(svc Service)
- func (s *Server) BadPeers() []string
- func (s *Server) BroadcastExtensible(p *payload.Extensible)
- func (s *Server) ConnectedPeers() []string
- func (s *Server) GetNotaryPool() *mempool.Pool
- func (s *Server) HandshakedPeersCount() int
- func (s *Server) ID() uint32
- func (s *Server) IsInSync() bool
- func (s *Server) PeerCount() int
- func (s *Server) Port() (uint16, error)
- func (s *Server) RelayP2PNotaryRequest(r *payload.P2PNotaryRequest) error
- func (s *Server) RelayTxn(t *transaction.Transaction) error
- func (s *Server) RequestTx(hashes ...util.Uint256)
- func (s *Server) Shutdown()
- func (s *Server) Start(errChan chan error)
- func (s *Server) SubscribeForNotaryRequests(ch chan<- mempoolevent.Event)
- func (s *Server) UnconnectedPeers() []string
- func (s *Server) UnsubscribeFromNotaryRequests(ch chan<- mempoolevent.Event)
- type ServerConfig
- type Service
- type StateSync
- type TCPPeer
- func (p *TCPPeer) AddGetAddrSent()
- func (p *TCPPeer) CanProcessAddr() bool
- func (p *TCPPeer) Disconnect(err error)
- func (p *TCPPeer) EnqueueHPPacket(block bool, msg []byte) error
- func (p *TCPPeer) EnqueueMessage(msg *Message) error
- func (p *TCPPeer) EnqueueP2PMessage(msg *Message) error
- func (p *TCPPeer) EnqueueP2PPacket(msg []byte) error
- func (p *TCPPeer) EnqueuePacket(block bool, msg []byte) error
- func (p *TCPPeer) HandlePing(ping *payload.Ping) error
- func (p *TCPPeer) HandlePong(pong *payload.Ping) error
- func (p *TCPPeer) HandleVersion(version *payload.Version) error
- func (p *TCPPeer) HandleVersionAck() error
- func (p *TCPPeer) Handshaked() bool
- func (p *TCPPeer) IsFullNode() bool
- func (p *TCPPeer) LastBlockIndex() uint32
- func (p *TCPPeer) PeerAddr() net.Addr
- func (p *TCPPeer) RemoteAddr() net.Addr
- func (p *TCPPeer) SendPing(msg *Message) error
- func (p *TCPPeer) SendVersion() error
- func (p *TCPPeer) SendVersionAck(msg *Message) error
- func (p *TCPPeer) StartProtocol()
- func (p *TCPPeer) Version() *payload.Version
- type TCPTransport
- type Transporter
Constants ¶
const CompressionMinSize = 1024
CompressionMinSize is the lower bound to apply compression.
Variables ¶
This section is empty.
Functions ¶
This section is empty.
Types ¶
type AddressWithCapabilities ¶ added in v0.90.0
type AddressWithCapabilities struct { Address string Capabilities capability.Capabilities }
AddressWithCapabilities represents node address with its capabilities.
type Blockqueuer ¶ added in v0.98.1
type Blockqueuer interface { AddBlock(block *block.Block) error AddHeaders(...*block.Header) error BlockHeight() uint32 }
Blockqueuer is the interface for block queue.
type CommandType ¶
type CommandType byte
CommandType represents the type of a message command.
const ( // Handshaking. CMDVersion CommandType = 0x00 CMDVerack CommandType = 0x01 // Connectivity. CMDGetAddr CommandType = 0x10 CMDAddr CommandType = 0x11 CMDPing CommandType = 0x18 CMDPong CommandType = 0x19 // Synchronization. CMDGetHeaders CommandType = 0x20 CMDHeaders CommandType = 0x21 CMDGetBlocks CommandType = 0x24 CMDMempool CommandType = 0x25 CMDInv CommandType = 0x27 CMDGetData CommandType = 0x28 CMDGetBlockByIndex CommandType = 0x29 CMDNotFound CommandType = 0x2a CMDTX = CommandType(payload.TXType) CMDBlock = CommandType(payload.BlockType) CMDExtensible = CommandType(payload.ExtensibleType) CMDP2PNotaryRequest = CommandType(payload.P2PNotaryRequestType) CMDGetMPTData CommandType = 0x51 // 0x5.. commands are used for extensions (P2PNotary, state exchange cmds) CMDMPTData CommandType = 0x52 CMDReject CommandType = 0x2f // SPV protocol. CMDFilterLoad CommandType = 0x30 CMDFilterAdd CommandType = 0x31 CMDFilterClear CommandType = 0x32 CMDMerkleBlock CommandType = 0x38 // Others. CMDAlert CommandType = 0x40 )
Valid protocol commands used to send between nodes.
func (CommandType) String ¶ added in v0.90.0
func (i CommandType) String() string
type DefaultDiscovery ¶
type DefaultDiscovery struct {
// contains filtered or unexported fields
}
DefaultDiscovery default implementation of the Discoverer interface.
func NewDefaultDiscovery ¶
func NewDefaultDiscovery(addrs []string, dt time.Duration, ts Transporter) *DefaultDiscovery
NewDefaultDiscovery returns a new DefaultDiscovery.
func (*DefaultDiscovery) BackFill ¶
func (d *DefaultDiscovery) BackFill(addrs ...string)
BackFill implements the Discoverer interface and will backfill the the pool with the given addresses.
func (*DefaultDiscovery) BadPeers ¶
func (d *DefaultDiscovery) BadPeers() []string
BadPeers returns all addresses of bad addrs.
func (*DefaultDiscovery) Close ¶
func (d *DefaultDiscovery) Close()
Close stops discoverer pool processing making discoverer almost useless.
func (*DefaultDiscovery) GoodPeers ¶
func (d *DefaultDiscovery) GoodPeers() []AddressWithCapabilities
GoodPeers returns all addresses of known good peers (that at least once succeeded handshaking with us).
func (*DefaultDiscovery) PoolCount ¶
func (d *DefaultDiscovery) PoolCount() int
PoolCount returns the number of available node addresses.
func (*DefaultDiscovery) RegisterBadAddr ¶
func (d *DefaultDiscovery) RegisterBadAddr(addr string)
RegisterBadAddr registers the given address as a bad address.
func (*DefaultDiscovery) RegisterConnectedAddr ¶
func (d *DefaultDiscovery) RegisterConnectedAddr(addr string)
RegisterConnectedAddr tells discoverer that given address is now connected.
func (*DefaultDiscovery) RegisterGoodAddr ¶
func (d *DefaultDiscovery) RegisterGoodAddr(s string, c capability.Capabilities)
RegisterGoodAddr registers good known connected address that passed handshake successfully.
func (*DefaultDiscovery) RequestRemote ¶
func (d *DefaultDiscovery) RequestRemote(n int)
RequestRemote tries to establish a connection with n nodes.
func (*DefaultDiscovery) UnconnectedPeers ¶
func (d *DefaultDiscovery) UnconnectedPeers() []string
UnconnectedPeers returns all addresses of unconnected addrs.
func (*DefaultDiscovery) UnregisterConnectedAddr ¶
func (d *DefaultDiscovery) UnregisterConnectedAddr(s string)
UnregisterConnectedAddr tells discoverer that this address is no longer connected, but it still is considered as good one.
type Discoverer ¶
type Discoverer interface { BackFill(...string) Close() PoolCount() int RequestRemote(int) RegisterBadAddr(string) RegisterGoodAddr(string, capability.Capabilities) RegisterConnectedAddr(string) UnregisterConnectedAddr(string) UnconnectedPeers() []string BadPeers() []string GoodPeers() []AddressWithCapabilities }
Discoverer is an interface that is responsible for maintaining a healthy connection pool.
type Ledger ¶ added in v0.98.1
type Ledger interface { extpool.Ledger mempool.Feer Blockqueuer GetBlock(hash util.Uint256) (*block.Block, error) GetConfig() config.ProtocolConfiguration GetHeader(hash util.Uint256) (*block.Header, error) GetHeaderHash(int) util.Uint256 GetMaxVerificationGAS() int64 GetMemPool() *mempool.Pool GetNotaryBalance(acc util.Uint160) *big.Int GetNotaryContractScriptHash() util.Uint160 GetNotaryDepositExpiration(acc util.Uint160) uint32 GetTransaction(util.Uint256) (*transaction.Transaction, uint32, error) HasBlock(util.Uint256) bool HeaderHeight() uint32 P2PSigExtensionsEnabled() bool PoolTx(t *transaction.Transaction, pools ...*mempool.Pool) error PoolTxWithData(t *transaction.Transaction, data interface{}, mp *mempool.Pool, feer mempool.Feer, verificationFunction func(t *transaction.Transaction, data interface{}) error) error RegisterPostBlock(f func(func(*transaction.Transaction, *mempool.Pool, bool) bool, *mempool.Pool, *block.Block)) SubscribeForBlocks(ch chan<- *block.Block) UnsubscribeFromBlocks(ch chan<- *block.Block) }
Ledger is everything Server needs from the blockchain.
type Message ¶
type Message struct { // Flags that represents whether a message is compressed. // 0 for None, 1 for Compressed. Flags MessageFlag // Command is byte command code. Command CommandType // Payload send with the message. Payload payload.Payload // StateRootInHeader specifies if state root is included in block header. // This is needed for correct decoding. StateRootInHeader bool // contains filtered or unexported fields }
Message is the complete message send between nodes.
func NewMessage ¶
func NewMessage(cmd CommandType, p payload.Payload) *Message
NewMessage returns a new message with the given payload.
type MessageFlag ¶ added in v0.90.0
type MessageFlag byte
MessageFlag represents compression level of message payload.
const ( Compressed MessageFlag = 1 << iota None MessageFlag = 0 )
Possible message flags.
type NotaryFeer ¶ added in v0.92.0
type NotaryFeer struct {
// contains filtered or unexported fields
}
NotaryFeer implements mempool.Feer interface for Notary balance handling.
func NewNotaryFeer ¶ added in v0.92.0
func NewNotaryFeer(bc Ledger) NotaryFeer
NewNotaryFeer returns new NotaryFeer instance.
func (NotaryFeer) BlockHeight ¶ added in v0.92.0
func (f NotaryFeer) BlockHeight() uint32
BlockHeight implements mempool.Feer interface.
func (NotaryFeer) FeePerByte ¶ added in v0.92.0
func (f NotaryFeer) FeePerByte() int64
FeePerByte implements mempool.Feer interface.
func (NotaryFeer) GetUtilityTokenBalance ¶ added in v0.92.0
func (f NotaryFeer) GetUtilityTokenBalance(acc util.Uint160) *big.Int
GetUtilityTokenBalance implements mempool.Feer interface.
func (NotaryFeer) P2PSigExtensionsEnabled ¶ added in v0.92.0
func (f NotaryFeer) P2PSigExtensionsEnabled() bool
P2PSigExtensionsEnabled implements mempool.Feer interface.
type Peer ¶
type Peer interface { // RemoteAddr returns the remote address that we're connected to now. RemoteAddr() net.Addr // PeerAddr returns the remote address that should be used to establish // a new connection to the node. It can differ from the RemoteAddr // address in case where the remote node is a client and its current // connection port is different from the one the other node should use // to connect to it. It's only valid after the handshake is completed, // before that it returns the same address as RemoteAddr. PeerAddr() net.Addr Disconnect(error) // EnqueueMessage is a temporary wrapper that sends a message via // EnqueuePacket if there is no error in serializing it. EnqueueMessage(*Message) error // EnqueuePacket is a blocking packet enqueuer, it doesn't return until // it puts given packet into the queue. It accepts a slice of bytes that // can be shared with other queues (so that message marshalling can be // done once for all peers). Does nothing is the peer is not yet // completed handshaking. EnqueuePacket(bool, []byte) error // EnqueueP2PMessage is a temporary wrapper that sends a message via // EnqueueP2PPacket if there is no error in serializing it. EnqueueP2PMessage(*Message) error // EnqueueP2PPacket is a blocking packet enqueuer, it doesn't return until // it puts given packet into the queue. It accepts a slice of bytes that // can be shared with other queues (so that message marshalling can be // done once for all peers). Does nothing is the peer is not yet // completed handshaking. This queue is intended to be used for unicast // peer to peer communication that is more important than broadcasts // (handled by EnqueuePacket), but less important than high-priority // messages (handled by EnqueueHPPacket). EnqueueP2PPacket([]byte) error // EnqueueHPPacket is a blocking high priority packet enqueuer, it // doesn't return until it puts given packet into the high-priority // queue. EnqueueHPPacket(bool, []byte) error Version() *payload.Version LastBlockIndex() uint32 Handshaked() bool IsFullNode() bool // SendPing enqueues a ping message to be sent to the peer and does // appropriate protocol handling like timeouts and outstanding pings // management. SendPing(*Message) error // SendVersion checks handshake status and sends a version message to // the peer. SendVersion() error SendVersionAck(*Message) error // StartProtocol is a goroutine to be run after the handshake. It // implements basic peer-related protocol handling. StartProtocol() HandleVersion(*payload.Version) error HandleVersionAck() error // HandlePing checks ping contents against Peer's state and updates it. HandlePing(ping *payload.Ping) error // HandlePong checks pong contents against Peer's state and updates it. HandlePong(pong *payload.Ping) error // AddGetAddrSent is to inform local peer context that a getaddr command // is sent. The decision to send getaddr is server-wide, but it needs to be // accounted for in peer's context, thus this method. AddGetAddrSent() // CanProcessAddr checks whether an addr command is expected to come from // this peer and can be processed. CanProcessAddr() bool }
Peer represents a network node neo-go is connected to.
type Server ¶
type Server struct { // ServerConfig holds the Server configuration. ServerConfig // contains filtered or unexported fields }
Server represents the local Node in the network. Its transport could be of any kind.
func NewServer ¶
func NewServer(config ServerConfig, chain Ledger, stSync StateSync, log *zap.Logger) (*Server, error)
NewServer returns a new Server, initialized with the given configuration.
func (*Server) AddExtensibleHPService ¶ added in v0.98.1
func (s *Server) AddExtensibleHPService(svc Service, category string, handler func(*payload.Extensible) error, txCallback func(*transaction.Transaction))
AddExtensibleHPService registers a high-priority service that handles extensible payload of some kind.
func (*Server) AddExtensibleService ¶ added in v0.98.1
func (s *Server) AddExtensibleService(svc Service, category string, handler func(*payload.Extensible) error)
AddExtensibleService register a service that handles extensible payload of some kind.
func (*Server) AddService ¶ added in v0.98.1
AddService allows to add a service to be started/stopped by Server.
func (*Server) BroadcastExtensible ¶ added in v0.98.1
func (s *Server) BroadcastExtensible(p *payload.Extensible)
BroadcastExtensible add locally-generated Extensible payload to the pool and advertises it to peers.
func (*Server) ConnectedPeers ¶
ConnectedPeers returns a list of currently connected peers.
func (*Server) GetNotaryPool ¶ added in v0.98.1
GetNotaryPool allows to retrieve notary pool, if it's configured.
func (*Server) HandshakedPeersCount ¶
HandshakedPeersCount returns the number of connected peers which have already performed handshake.
func (*Server) IsInSync ¶
IsInSync answers the question of whether the server is in sync with the network or not (at least how the server itself sees it). The server operates with the data that it has, the number of peers (that has to be more than minimum number) and height of these peers (our chain has to be not lower than 2/3 of our peers have). Ideally we would check for the highest of the peers, but the problem is that they can lie to us and send whatever height they want to.
func (*Server) Port ¶ added in v0.90.0
Port returns a server port that should be used in P2P version exchange. In case if `AnnouncedPort` is set in the server.Config, the announced node port will be returned (e.g. consider the node running behind NAT). If `AnnouncedPort` isn't set, the port returned may still differs from that of server.Config.
func (*Server) RelayP2PNotaryRequest ¶ added in v0.93.0
func (s *Server) RelayP2PNotaryRequest(r *payload.P2PNotaryRequest) error
RelayP2PNotaryRequest adds given request to the pool and relays. It does not check P2PSigExtensions enabled.
func (*Server) RelayTxn ¶
func (s *Server) RelayTxn(t *transaction.Transaction) error
RelayTxn a new transaction to the local node and the connected peers. Reference: the method OnRelay in C#: https://github.com/neo-project/neo/blob/master/neo/Network/P2P/LocalNode.cs#L159
func (*Server) RequestTx ¶ added in v0.98.1
RequestTx asks for given transactions from Server peers using GetData message.
func (*Server) Shutdown ¶
func (s *Server) Shutdown()
Shutdown disconnects all peers and stops listening.
func (*Server) SubscribeForNotaryRequests ¶ added in v0.95.2
func (s *Server) SubscribeForNotaryRequests(ch chan<- mempoolevent.Event)
SubscribeForNotaryRequests adds given channel to a notary request event broadcasting, so when a new P2PNotaryRequest is received or an existing P2PNotaryRequest is removed from pool you'll receive it via this channel. Make sure it's read from regularly as not reading these events might affect other Server functions. Ensure that P2PSigExtensions are enabled before calling this method.
func (*Server) UnconnectedPeers ¶
UnconnectedPeers returns a list of peers that are in the discovery peer list but are not connected to the server.
func (*Server) UnsubscribeFromNotaryRequests ¶ added in v0.95.2
func (s *Server) UnsubscribeFromNotaryRequests(ch chan<- mempoolevent.Event)
UnsubscribeFromNotaryRequests unsubscribes given channel from notary request notifications, you can close it afterwards. Passing non-subscribed channel is a no-op. Ensure that P2PSigExtensions are enabled before calling this method.
type ServerConfig ¶
type ServerConfig struct { // MinPeers is the minimum number of peers for normal operation, // when the node has less than this number of peers it tries to // connect with some new ones. MinPeers int // AttemptConnPeers it the number of connection to try to // establish when the connection count drops below the MinPeers // value. AttemptConnPeers int // MaxPeers it the maximum numbers of peers that can // be connected to the server. MaxPeers int // The user agent of the server. UserAgent string // Address. Example: "127.0.0.1". Address string // AnnouncedPort is an announced node port for P2P version exchange. AnnouncedPort uint16 // Port is the actual node port it is bound to. Example: 20332. Port uint16 // The network mode the server will operate on. // ModePrivNet docker private network. // ModeTestNet NEO test network. // ModeMainNet NEO main network. Net netmode.Magic // Relay determines whether the server is forwarding its inventory. Relay bool // Seeds are a list of initial nodes used to establish connectivity. Seeds []string // Maximum duration a single dial may take. DialTimeout time.Duration // The duration between protocol ticks with each connected peer. // When this is 0, the default interval of 5 seconds will be used. ProtoTickInterval time.Duration // Interval used in pinging mechanism for syncing blocks. PingInterval time.Duration // Time to wait for pong(response for sent ping request). PingTimeout time.Duration // Level of the internal logger. LogLevel zapcore.Level // Wallet is a wallet configuration. Wallet *config.Wallet // TimePerBlock is an interval which should pass between two successive blocks. TimePerBlock time.Duration // OracleCfg is oracle module configuration. OracleCfg config.OracleConfiguration // P2PNotaryCfg is notary module configuration. P2PNotaryCfg config.P2PNotary // StateRootCfg is stateroot module configuration. StateRootCfg config.StateRoot // ExtensiblePoolSize is size of the pool for extensible payloads from a single sender. ExtensiblePoolSize int }
ServerConfig holds the server configuration.
func NewServerConfig ¶
func NewServerConfig(cfg config.Config) ServerConfig
NewServerConfig creates a new ServerConfig struct using the main applications config.
type Service ¶ added in v0.98.1
type Service interface { Start() Shutdown() }
Service is a service abstraction (oracle, state root, consensus, etc).
type StateSync ¶ added in v0.98.1
type StateSync interface { AddMPTNodes([][]byte) error Blockqueuer Init(currChainHeight uint32) error IsActive() bool IsInitialized() bool GetUnknownMPTNodesBatch(limit int) []util.Uint256 NeedHeaders() bool NeedMPTNodes() bool Traverse(root util.Uint256, process func(node mpt.Node, nodeBytes []byte) bool) error }
StateSync represents state sync module.
type TCPPeer ¶
type TCPPeer struct {
// contains filtered or unexported fields
}
TCPPeer represents a connected remote node in the network over TCP.
func NewTCPPeer ¶
NewTCPPeer returns a TCPPeer structure based on the given connection.
func (*TCPPeer) AddGetAddrSent ¶ added in v0.92.0
func (p *TCPPeer) AddGetAddrSent()
AddGetAddrSent increments internal outstanding getaddr requests counter. The peer can only send then one addr reply per getaddr request.
func (*TCPPeer) CanProcessAddr ¶ added in v0.92.0
CanProcessAddr decrements internal outstanding getaddr requests counter and answers whether the addr command from the peer can be safely processed.
func (*TCPPeer) Disconnect ¶
Disconnect will fill the peer's done channel with the given error.
func (*TCPPeer) EnqueueHPPacket ¶
EnqueueHPPacket implements the Peer interface. It the peer is not yet handshaked it's a noop.
func (*TCPPeer) EnqueueMessage ¶
EnqueueMessage is a temporary wrapper that sends a message via EnqueuePacket if there is no error in serializing it.
func (*TCPPeer) EnqueueP2PMessage ¶
EnqueueP2PMessage implements the Peer interface.
func (*TCPPeer) EnqueueP2PPacket ¶
EnqueueP2PPacket implements the Peer interface.
func (*TCPPeer) EnqueuePacket ¶
EnqueuePacket implements the Peer interface.
func (*TCPPeer) HandlePing ¶ added in v0.91.0
HandlePing handles a ping message received from the peer.
func (*TCPPeer) HandlePong ¶
HandlePong handles a pong message received from the peer and does appropriate accounting of outstanding pings and timeouts.
func (*TCPPeer) HandleVersion ¶
HandleVersion checks for the handshake state and version message contents.
func (*TCPPeer) HandleVersionAck ¶
HandleVersionAck checks handshake sequence correctness when VerAck message is received.
func (*TCPPeer) Handshaked ¶
Handshaked returns status of the handshake, whether it's completed or not.
func (*TCPPeer) IsFullNode ¶ added in v0.90.0
IsFullNode returns whether the node has full capability or TCP/WS only.
func (*TCPPeer) LastBlockIndex ¶
LastBlockIndex returns last block index.
func (*TCPPeer) RemoteAddr ¶
RemoteAddr implements the Peer interface.
func (*TCPPeer) SendPing ¶
SendPing sends a ping message to the peer and does appropriate accounting of outstanding pings and timeouts.
func (*TCPPeer) SendVersion ¶
SendVersion checks for the handshake state and sends a message to the peer.
func (*TCPPeer) SendVersionAck ¶
SendVersionAck checks for the handshake state and sends a message to the peer.
func (*TCPPeer) StartProtocol ¶
func (p *TCPPeer) StartProtocol()
StartProtocol starts a long running background loop that interacts every ProtoTickInterval with the peer. It's only good to run after the handshake.
type TCPTransport ¶
type TCPTransport struct {
// contains filtered or unexported fields
}
TCPTransport allows network communication over TCP.
func NewTCPTransport ¶
func NewTCPTransport(s *Server, bindAddr string, log *zap.Logger) *TCPTransport
NewTCPTransport returns a new TCPTransport that will listen for new incoming peer connections.
func (*TCPTransport) Accept ¶
func (t *TCPTransport) Accept()
Accept implements the Transporter interface.
func (*TCPTransport) Address ¶ added in v0.90.0
func (t *TCPTransport) Address() string
Address implements the Transporter interface.
func (*TCPTransport) Close ¶
func (t *TCPTransport) Close()
Close implements the Transporter interface.
func (*TCPTransport) Dial ¶
func (t *TCPTransport) Dial(addr string, timeout time.Duration) error
Dial implements the Transporter interface.
func (*TCPTransport) Proto ¶
func (t *TCPTransport) Proto() string
Proto implements the Transporter interface.