agent

Documentation

Index

• Constants
• type Config
• type Flows
  • func FlowsAgent(cfg *Config) (*Flows, error)
  • func (f *Flows) Run(ctx context.Context) error
  • func (f *Flows) Status() Status
• type Status
  • func (s Status) String() string

Constants

const (
	ListenPoll       = "poll"
	ListenWatch      = "watch"
	DeduperNone      = "none"
	DeduperFirstCome = "firstCome"
	DirectionIngress = "ingress"
	DirectionEgress  = "egress"
	DirectionBoth    = "both"

	IPTypeAny  = "any"
	IPTypeIPV4 = "ipv4"
	IPTypeIPV6 = "ipv6"

	IPIfaceExternal    = "external"
	IPIfaceLocal       = "local"
	IPIfaceNamedPrefix = "name:"
)

Types

type Config

type Config struct {
	// AgentIP allows overriding the reported Agent IP address on each flow.
	AgentIP string `env:"AGENT_IP"`
	// AgentIPIface specifies which interface should the agent pick the IP address from in order to
	// report it in the AgentIP field on each flow. Accepted values are: external (default), local,
	// or name:<interface name> (e.g. name:eth0).
	// If the AgentIP configuration property is set, this property has no effect.
	AgentIPIface string `env:"AGENT_IP_IFACE" envDefault:"external"`
	// AgentIPType specifies which type of IP address (IPv4 or IPv6 or any) should the agent report
	// in the AgentID field of each flow. Accepted values are: any (default), ipv4, ipv6.
	// If the AgentIP configuration property is set, this property has no effect.
	AgentIPType string `env:"AGENT_IP_TYPE" envDefault:"any"`
	// Export selects the flows' exporter protocol. Accepted values are: grpc (default) or kafka
	// or ipfix+udp or ipfix+tcp.
	Export string `env:"EXPORT" envDefault:"grpc"`
	// TargetHost is the host name or IP of the target Flow collector, when the EXPORT variable is
	// set to "grpc"
	TargetHost string `env:"FLOWS_TARGET_HOST"`
	// TargetPort is the port the target Flow collector, when the EXPORT variable is set to "grpc"
	TargetPort int `env:"FLOWS_TARGET_PORT"`
	// GRPCMessageMaxFlows specifies the limit, in number of flows, of each GRPC message. Messages
	// larger than that number will be split and submitted sequentially.
	GRPCMessageMaxFlows int `env:"GRPC_MESSAGE_MAX_FLOWS" envDefault:"10000"`
	// Interfaces contains the interface names from where flows will be collected. If empty, the agent
	// will fetch all the interfaces in the system, excepting the ones listed in ExcludeInterfaces.
	// If an entry is enclosed by slashes (e.g. `/br-/`), it will match as regular expression,
	// otherwise it will be matched as a case-sensitive string.
	Interfaces []string `env:"INTERFACES" envSeparator:","`
	// ExcludeInterfaces contains the interface names that will be excluded from flow tracing. Default:
	// "lo" (loopback).
	// If an entry is enclosed by slashes (e.g. `/br-/`), it will match as regular expression,
	// otherwise it will be matched as a case-sensitive string.
	ExcludeInterfaces []string `env:"EXCLUDE_INTERFACES" envSeparator:"," envDefault:"lo"`
	// BuffersLength establishes the length of communication channels between the different processing
	// stages
	BuffersLength int `env:"BUFFERS_LENGTH" envDefault:"50"`
	// ExporterBufferLength establishes the length of the buffer of flow batches (not individual flows)
	// that can be accumulated before the Kafka or GRPC exporter. When this buffer is full (e.g.
	// because the Kafka or GRPC endpoint is slow), incoming flow batches will be dropped. If unset,
	// its value is the same as the BUFFERS_LENGTH property.
	ExporterBufferLength int `env:"EXPORTER_BUFFER_LENGTH"`
	// CacheMaxFlows specifies how many flows can be accumulated in the accounting cache before
	// being flushed for its later export
	CacheMaxFlows int `env:"CACHE_MAX_FLOWS" envDefault:"5000"`
	// CacheActiveTimeout specifies the maximum duration that flows are kept in the accounting
	// cache before being flushed for its later export
	CacheActiveTimeout time.Duration `env:"CACHE_ACTIVE_TIMEOUT" envDefault:"5s"`
	// Deduper specifies the deduper type. Accepted values are "none" (disabled) and "firstCome".
	// When enabled, it will detect duplicate flows (flows that have been detected e.g. through
	// both the physical and a virtual interface).
	// "firstCome" will forward only flows from the first interface the flows are received from.
	Deduper string `env:"DEDUPER" envDefault:"none"`
	// DeduperFCExpiry specifies the expiry duration of the flows "firstCome" deduplicator. After
	// a flow hasn't been received for that expiry time, the deduplicator forgets it. That means
	// that a flow from a connection that has been inactive during that period could be forwarded
	// again from a different interface.
	// If the value is not set, it will default to 2 * CacheActiveTimeout
	DeduperFCExpiry time.Duration `env:"DEDUPER_FC_EXPIRY"`
	// DeduperJustMark will just mark duplicates (boolean field) instead of dropping them.
	DeduperJustMark bool `env:"DEDUPER_JUST_MARK"`
	// Direction allows selecting which flows to trace according to its direction. Accepted values
	// are "ingress", "egress" or "both" (default).
	Direction string `env:"DIRECTION" envDefault:"both"`
	// Logger level. From more to less verbose: trace, debug, info, warn, error, fatal, panic.
	LogLevel string `env:"LOG_LEVEL" envDefault:"info"`
	// Sampling holds the rate at which packets should be sampled and sent to the target collector.
	// E.g. if set to 100, one out of 100 packets, on average, will be sent to the target collector.
	Sampling int `env:"SAMPLING" envDefault:"0"`
	// ListenInterfaces specifies the mechanism used by the agent to listen for added or removed
	// network interfaces. Accepted values are "watch" (default) or "poll".
	// If the value is "watch", interfaces are traced immediately after they are created. This is
	// the recommended setting for most configurations. "poll" value is a fallback mechanism that
	// periodically queries the current network interfaces (frequency specified by ListenPollPeriod).
	ListenInterfaces string `env:"LISTEN_INTERFACES" envDefault:"watch"`
	// ListenPollPeriod specifies the periodicity to query the network interfaces when the
	// ListenInterfaces value is set to "poll".
	ListenPollPeriod time.Duration `env:"LISTEN_POLL_PERIOD" envDefault:"10s"`
	// KafkaBrokers is a comma-separated list of tha addresses of the brokers of the Kafka cluster
	// that this agent is configured to send messages to.
	KafkaBrokers []string `env:"KAFKA_BROKERS" envSeparator:","`
	// KafkaTopic is the name of the topic where the flows' processor will receive the flows from.
	KafkaTopic string `env:"KAFKA_TOPIC" envDefault:"network-flows"`
	// KafkaBatchMessages sets the limit on how many messages will be buffered before being sent to a
	// partition.
	KafkaBatchMessages int `env:"KAFKA_BATCH_MESSAGES" envDefault:"1000"`
	// KafkaBatchSize sets the limit, in bytes, of the maximum size of a request before being sent
	// to a partition.
	KafkaBatchSize int `env:"KAFKA_BATCH_SIZE" envDefault:"1048576"`
	// KafkaAsync. If it's true, the message writing process will never block. It also means that
	// errors are ignored since the caller will not receive the returned value.
	KafkaAsync bool `env:"KAFKA_ASYNC" envDefault:"true"`
	// KafkaCompression sets the compression codec to be used to compress messages. The accepted
	// values are: none (default), gzip, snappy, lz4, zstd.
	KafkaCompression string `env:"KAFKA_COMPRESSION" envDefault:"none"`
	// KafkaEnableTLS set true to enable TLS
	KafkaEnableTLS bool `env:"KAFKA_ENABLE_TLS" envDefault:"false"`
	// KafkaTLSInsecureSkipVerify skips server certificate verification in TLS connections
	KafkaTLSInsecureSkipVerify bool `env:"KAFKA_TLS_INSECURE_SKIP_VERIFY" envDefault:"false"`
	// KafkaTLSCACertPath is the path to the Kafka server certificate for TLS connections
	KafkaTLSCACertPath string `env:"KAFKA_TLS_CA_CERT_PATH"`
	// KafkaTLSUserCertPath is the path to the user (client) certificate for mTLS connections
	KafkaTLSUserCertPath string `env:"KAFKA_TLS_USER_CERT_PATH"`
	// KafkaTLSUserKeyPath is the path to the user (client) private key for mTLS connections
	KafkaTLSUserKeyPath string `env:"KAFKA_TLS_USER_KEY_PATH"`
	// ProfilePort sets the listening port for Go's Pprof tool. If it is not set, profile is disabled
	ProfilePort int `env:"PROFILE_PORT"`
}

type Flows

type Flows struct {
	// contains filtered or unexported fields
}

Flows reporting agent

func FlowsAgent

func FlowsAgent(cfg *Config) (*Flows, error)

FlowsAgent instantiates a new agent, given a configuration.

func (*Flows) Run

func (f *Flows) Run(ctx context.Context) error

Run a Flows agent. The function will keep running in the same thread until the passed context is canceled

func (*Flows) Status

func (f *Flows) Status() Status

type Status

type Status int

Status of the agent service. Helps on the health report as well as making some asynchronous tests waiting for the agent to accept flows.

const (
	StatusNotStarted Status = iota
	StatusStarting
	StatusStarted
	StatusStopping
	StatusStopped
)

func (Status) String

func (s Status) String() string