rke

README

rke

Rancher Kubernetes Engine, an extremely simple, lightning fast Kubernetes installer that works everywhere.

Download

Please check the releases page.

Requirements

• Docker versions 1.12.6, 1.13.1, or 17.03 should be installed for Kubernetes 1.8.
• OpenSSH 7.0+ must be installed on each node for stream local forwarding to work.
• The SSH user used for node access must be a member of the docker group:

usermod -aG docker <user_name>

• Ports 6443, 2379, and 2380 should be opened between cluster nodes.
• Swap disabled on worker nodes.

Getting Started

Starting out with RKE? Check out this blog post.

Using RKE

Standing up a Kubernetes is as simple as creating a cluster.yml configuration file and running the command:

./rke up --config cluster.yml

Full cluster.yml example

You can view full sample of cluster.yml here.

Minimal cluster.yml example

nodes:
  - address: 1.1.1.1
    user: ubuntu
    role: [controlplane,worker,etcd]

services:
  etcd:
    image: quay.io/coreos/etcd:latest
  kube-api:
    image: rancher/k8s:v1.8.3-rancher2
  kube-controller:
    image: rancher/k8s:v1.8.3-rancher2
  scheduler:
    image: rancher/k8s:v1.8.3-rancher2
  kubelet:
    image: rancher/k8s:v1.8.3-rancher2
  kubeproxy:
    image: rancher/k8s:v1.8.3-rancher2

Network Plugins

RKE supports the following network plugins:

• Flannel
• Calico
• Cannal
• Weave

To use specific network plugin configure cluster.yml to include:

network:
  plugin: flannel

Network Options

There are extra options that can be specified for each network plugin:

Flannel

• flannel_image: Flannel daemon Docker image
• flannel_cni_image: Flannel CNI binary installer Docker image
• flannel_iface: Interface to use for inter-host communication

Calico

• calico_node_image: Calico Daemon Docker image
• calico_cni_image: Calico CNI binary installer Docker image
• calico_controllers_image: Calico Controller Docker image
• calicoctl_image: Calicoctl tool Docker image
• calico_cloud_provider: Cloud provider where Calico will operate, currently supported values are: aws, gce

Cannal

• canal_node_image: Cannal Node Docker image
• canal_cni_image: Cannal CNI binary installer Docker image
• canal_flannel_image: Cannal Flannel Docker image

Weave

• weave_node_image: Weave Node Docker image
• weave_cni_image: Weave CNI binary installer Docker image

Addons

RKE support pluggable addons on cluster bootstrap, user can specify the addon yaml in the cluster.yml file, and when running

rke up --config cluster.yml

RKE will deploy the addons yaml after the cluster starts, RKE first uploads this yaml file as a configmap in kubernetes cluster and then run a kubernetes job that mounts this config map and deploy the addons.

Note that RKE doesn't support yet removal of the addons, so once they are deployed the first time you can't change them using rke

To start using addons use addons: option in the cluster.yml file for example:

addons: |-
    ---
    apiVersion: v1
    kind: Pod
    metadata:
      name: my-nginx
      namespace: default
    spec:
      containers:
      - name: my-nginx
        image: nginx
        ports:
        - containerPort: 80

Note that we are using |- because the addons option is a multi line string option, where you can specify multiple yaml files and separate them with ---

High Availability

RKE is HA ready, you can specify more than one controlplane host in the cluster.yml file, and rke will deploy master components on all of them, the kubelets are configured to connect to 127.0.0.1:6443 by default which is the address of nginx-proxy service that proxy requests to all master nodes.

to start an HA cluster, just specify more than one host with role controlplane, and start the cluster normally.

Adding/Removing Nodes

RKE support adding/removing nodes for worker and controlplane hosts, in order to add additional nodes you will only need to update the cluster.yml file with additional nodes and run rke up with the same file.

To remove nodes just remove them from the hosts list in the cluster configuration file cluster.yml, and re run rke up command.

Cluster Remove

RKE support rke remove command, the command does the following:

• Connect to each host and remove the kubernetes services deployed on it.
• Clean each host from the directories left by the services:
  • /etc/kubernetes/ssl
  • /var/lib/etcd
  • /etc/cni
  • /opt/cni
  • /var/run/calico

Note that this command is irreversible and will destroy the kubernetes cluster entirely.

Cluster Upgrade

RKE support kubernetes cluster upgrade through changing the image version of services, in order to do that change the image option for each services, for example:

image: rancher/k8s:v1.8.2-rancher1

TO

image: rancher/k8s:v1.8.3-rancher2

And then run:

rke up --config cluster.yml

RKE will first look for the local kube_config_cluster.yml and then tries to upgrade each service to the latest image.

Note that rollback isn't supported in RKE and may lead to unxpected results

RKE Config

RKE support command rke config which generates a cluster config template for the user, to start using this command just write:

rke config --name mycluster.yml

RKE will ask some questions around the cluster file like number of the hosts, ips, ssh users, etc, --empty option will generate an empty cluster.yml file, also if you just want to print on the screen and not save it in a file you can use --print.

Ingress Controller

RKE will deploy Nginx controller by default, user can disable this by specifying none to ingress option in the cluster configuration, user also can specify list of options fo nginx config map listed in this docs, for example:

ingress:
  type: nginx
  options:
    map-hash-bucket-size: "128"
    ssl-protocols: SSLv2

RKE will deploy ingress controller on all schedulable nodes (controlplane and workers), to specify only certain nodes for ingress controller to be deployed user has to specify node_selector for the ingress and the right label on the node, for example:

nodes:
  - address: 1.1.1.1
    role: [controlplane,worker,etcd]
    user: root
    labels:
      app: ingress

ingress:
  type: nginx
  node_selector:
    app: ingress

RKE will deploy Nginx Ingress controller as a DaemonSet with hostnetwork: true, so ports 80, and 443 will be opened on each node where the controller is deployed.

Operating Systems Notes

Atomic OS

• Container volumes may have some issues in Atomic OS due to SELinux, most of volumes are mounted in rke with option z, however user still need to run the following commands before running rke:

# mkdir /opt/cni /etc/cni
# chcon -Rt svirt_sandbox_file_t /etc/cni
# chcon -Rt svirt_sandbox_file_t /opt/cni

• OpenSSH 6.4 shipped by default on Atomic CentOS which doesn't support SSH tunneling and therefore breaks rke, upgrading OpenSSH to the latest version supported by Atomic host will solve this problem:

# atomic host upgrade

• Atomic host doesn't come with docker group by default, you can change ownership of docker.sock to enable specific user to run rke:

# chown <user> /var/run/docker.sock

License

Copyright (c) 2017 Rancher Labs, Inc.

Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. You may obtain a copy of the License at

http://www.apache.org/licenses/LICENSE-2.0

Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License.