params

package
v1.3.2 Latest Latest
Warning

This package is not in the latest version of its module.

 Go to latest Published: Feb 16, 2021 License: GPL-3.0 Imports: 5 Imported by: 0

Documentation

Index

Constants

View Source 
const (
	Wei  = 1
	GWei = 1e9
	NEAT = 1e18
)
View Source 
const (
	GasLimitBoundDivisor uint64 = 1024    // The bound divisor of the gas limit, used in update calculations.
	MinGasLimit          uint64 = 5000    // Minimum the gas limit may ever be.
	GenesisGasLimit      uint64 = 4712388 // Gas limit of the Genesis block.

	MaximumExtraDataSize  uint64 = 32    // Maximum size extra data may be after Genesis.
	ExpByteGas            uint64 = 10    // Times ceil(log256(exponent)) for the EXP instruction.
	SloadGas              uint64 = 50    // Multiplied by the number of 32-byte words that are copied (round up) for any *COPY operation and added.
	CallValueTransferGas  uint64 = 9000  // Paid for CALL when the value transfer is non-zero.
	CallNewAccountGas     uint64 = 25000 // Paid for CALL when the destination address didn't exist prior.
	TxGas                 uint64 = 21000 // Per transaction not creating a contract. NOTE: Not payable on data of calls between transactions.
	TxGasContractCreation uint64 = 53000 // Per transaction that creates a contract. NOTE: Not payable on data of calls between transactions.
	TxDataZeroGas         uint64 = 4     // Per byte of data attached to a transaction that equals zero. NOTE: Not payable on data of calls between transactions.
	QuadCoeffDiv          uint64 = 512   // Divisor for the quadratic particle of the memory cost equation.
	LogDataGas            uint64 = 8     // Per byte in a LOG* operation's data.
	CallStipend           uint64 = 2300  // Free gas given at beginning of call.

	Sha3Gas     uint64 = 30 // Once per SHA3 operation.
	Sha3WordGas uint64 = 6  // Once per word of the SHA3 operation's data.

	SstoreSetGas    uint64 = 20000 // Once per SLOAD operation.
	SstoreResetGas  uint64 = 5000  // Once per SSTORE operation if the zeroness changes from zero.
	SstoreClearGas  uint64 = 5000  // Once per SSTORE operation if the zeroness doesn't change.
	SstoreRefundGas uint64 = 15000 // Once per SSTORE operation if the zeroness changes to zero.

	NetSstoreNoopGas  uint64 = 200   // Once per SSTORE operation if the value doesn't change.
	NetSstoreInitGas  uint64 = 20000 // Once per SSTORE operation from clean zero.
	NetSstoreCleanGas uint64 = 5000  // Once per SSTORE operation from clean non-zero.
	NetSstoreDirtyGas uint64 = 200   // Once per SSTORE operation from dirty.

	NetSstoreClearRefund      uint64 = 15000 // Once per SSTORE operation for clearing an originally existing storage slot
	NetSstoreResetRefund      uint64 = 4800  // Once per SSTORE operation for resetting to the original non-zero value
	NetSstoreResetClearRefund uint64 = 19800 // Once per SSTORE operation for resetting to the original zero value

	SstoreSentryGasEIP2200   uint64 = 2300  // Minimum gas required to be present for an SSTORE call, not consumed
	SstoreNoopGasEIP2200     uint64 = 800   // Once per SSTORE operation if the value doesn't change.
	SstoreDirtyGasEIP2200    uint64 = 800   // Once per SSTORE operation if a dirty value is changed.
	SstoreInitGasEIP2200     uint64 = 20000 // Once per SSTORE operation from clean zero to non-zero
	SstoreInitRefundEIP2200  uint64 = 19200 // Once per SSTORE operation for resetting to the original zero value
	SstoreCleanGasEIP2200    uint64 = 5000  // Once per SSTORE operation from clean non-zero to something else
	SstoreCleanRefundEIP2200 uint64 = 4200  // Once per SSTORE operation for resetting to the original non-zero value
	SstoreClearRefundEIP2200 uint64 = 15000 // Once per SSTORE operation for clearing an originally existing storage slot

	JumpdestGas   uint64 = 1     // Once per JUMPDEST operation.
	EpochDuration uint64 = 30000 // Duration between proof-of-work epochs.

	CreateDataGas            uint64 = 200   //
	CallCreateDepth          uint64 = 1024  // Maximum depth of call/create stack.
	ExpGas                   uint64 = 10    // Once per EXP instruction
	LogGas                   uint64 = 375   // Per LOG* operation.
	CopyGas                  uint64 = 3     //
	StackLimit               uint64 = 1024  // Maximum size of VM stack allowed.
	TierStepGas              uint64 = 0     // Once per operation, for a selection of them.
	LogTopicGas              uint64 = 375   // Multiplied by the * of the LOG*, per LOG transaction. e.g. LOG0 incurs 0 * c_txLogTopicGas, LOG4 incurs 4 * c_txLogTopicGas.
	CreateGas                uint64 = 32000 // Once per CREATE operation & contract-creation transaction.
	Create2Gas               uint64 = 32000 // Once per CREATE2 operation
	SelfdestructRefundGas    uint64 = 24000 // Refunded following a selfdestruct operation.
	SuicideRefundGas         uint64 = 24000 // Refunded following a suicide operation.
	MemoryGas                uint64 = 3     // Times the address of the (highest referenced byte in memory + 1). NOTE: referencing happens on read, write and in instructions such as RETURN and CALL.
	TxDataNonZeroGasFrontier uint64 = 68    // Per byte of data attached to a transaction that is not equal to zero. NOTE: Not payable on data of calls between transactions.
	TxDataNonZeroGasEIP2028  uint64 = 16    // Per byte of non zero data attached to a transaction after EIP 2028 (part in Istanbul)

	// These have been changed during the course of the chain
	CallGasFrontier              uint64 = 40  // Once per CALL operation & message call transaction.
	CallGasEIP150                uint64 = 700 // Static portion of gas for CALL-derivates after EIP 150 (Tangerine)
	BalanceGasFrontier           uint64 = 20  // The cost of a BALANCE operation
	BalanceGasEIP150             uint64 = 400 // The cost of a BALANCE operation after Tangerine
	BalanceGasEIP1884            uint64 = 700 // The cost of a BALANCE operation after EIP 1884 (part of Istanbul)
	ExtcodeSizeGasFrontier       uint64 = 20  // Cost of EXTCODESIZE before EIP 150 (Tangerine)
	ExtcodeSizeGasEIP150         uint64 = 700 // Cost of EXTCODESIZE after EIP 150 (Tangerine)
	SloadGasFrontier             uint64 = 50
	SloadGasEIP150               uint64 = 200
	SloadGasEIP1884              uint64 = 800  // Cost of SLOAD after EIP 1884 (part of Istanbul)
	ExtcodeHashGasConstantinople uint64 = 400  // Cost of EXTCODEHASH (introduced in Constantinople)
	ExtcodeHashGasEIP1884        uint64 = 700  // Cost of EXTCODEHASH after EIP 1884 (part in Istanbul)
	SelfdestructGasEIP150        uint64 = 5000 // Cost of SELFDESTRUCT post EIP 150 (Tangerine)

	// EXP has a dynamic portion depending on the size of the exponent
	ExpByteFrontier uint64 = 10 // was set to 10 in Frontier
	ExpByteEIP158   uint64 = 50 // was raised to 50 during Eip158 (Spurious Dragon)

	// Extcodecopy has a dynamic AND a static cost. This represents only the
	// static portion of the gas. It was changed during EIP 150 (Tangerine)
	ExtcodeCopyBaseFrontier uint64 = 20
	ExtcodeCopyBaseEIP150   uint64 = 700

	// CreateBySelfdestructGas is used when the refunded account is one that does
	// not exist. This logic is similar to call.
	// Introduced in Tangerine Whistle (Eip 150)
	CreateBySelfdestructGas uint64 = 25000

	MaxCodeSize = 24576 // Maximum bytecode to permit for a contract

	EcrecoverGas            uint64 = 3000   // Elliptic curve sender recovery gas price
	Sha256BaseGas           uint64 = 60     // Base price for a SHA256 operation
	Sha256PerWordGas        uint64 = 12     // Per-word price for a SHA256 operation
	Ripemd160BaseGas        uint64 = 600    // Base price for a RIPEMD160 operation
	Ripemd160PerWordGas     uint64 = 120    // Per-word price for a RIPEMD160 operation
	IdentityBaseGas         uint64 = 15     // Base price for a data copy operation
	IdentityPerWordGas      uint64 = 3      // Per-work price for a data copy operation
	ModExpQuadCoeffDiv      uint64 = 20     // Divisor for the quadratic particle of the big int modular exponentiation
	Bn256AddGas             uint64 = 500    // Gas needed for an elliptic curve addition
	Bn256ScalarMulGas       uint64 = 40000  // Gas needed for an elliptic curve scalar multiplication
	Bn256PairingBaseGas     uint64 = 100000 // Base price for an elliptic curve pairing check
	Bn256PairingPerPointGas uint64 = 80000  // Per-point price for an elliptic curve pairing check

	Bn256AddGasByzantium             uint64 = 500    // Byzantium gas needed for an elliptic curve addition
	Bn256AddGasIstanbul              uint64 = 150    // Gas needed for an elliptic curve addition
	Bn256ScalarMulGasByzantium       uint64 = 40000  // Byzantium gas needed for an elliptic curve scalar multiplication
	Bn256ScalarMulGasIstanbul        uint64 = 6000   // Gas needed for an elliptic curve scalar multiplication
	Bn256PairingBaseGasByzantium     uint64 = 100000 // Byzantium base price for an elliptic curve pairing check
	Bn256PairingBaseGasIstanbul      uint64 = 45000  // Base price for an elliptic curve pairing check
	Bn256PairingPerPointGasByzantium uint64 = 80000  // Byzantium per-point price for an elliptic curve pairing check
	Bn256PairingPerPointGasIstanbul  uint64 = 34000  // Per-point price for an elliptic curve pairing check
)
View Source 
const (
	VersionMajor = 4          // Major version component of the current release
	VersionMinor = 0          // Minor version component of the current release
	VersionPatch = 8          // Patch version component of the current release
	VersionMeta  = "unstable" // Version metadata to append to the version string
)
View Source 
const (
	// BloomBitsBlocks is the number of blocks a single bloom bit section vector
	// contains.
	BloomBitsBlocks uint64 = 4096
)

Variables

View Source 
var (
	MainnetGenesisHash = common.HexToHash("0x5b0937e8c6189a45637f0eeb5d2c62b3794e08b695d1f3e339122c80ff7404e3") // Mainnet genesis hash to enforce below configs on
	TestnetGenesisHash = common.HexToHash("0x1cbef527b5e69640b795df3b76437741e7fd4c98be557c6ead9be5f38ae7febc") // Testnet genesis hash to enforce below configs on
)
View Source 
var (
	// MainnetChainConfig is the chain parameters to run a node on the main network.
	MainnetChainConfig = &ChainConfig{
		NeatChainId:         "neatio",
		ChainId:             big.NewInt(1),
		HomesteadBlock:      big.NewInt(0),
		EIP150Block:         big.NewInt(0),
		EIP150Hash:          common.HexToHash("0x2086799aeebeae135c246c65021c82b4e15a2c451340993aacfd2751886514f0"),
		EIP155Block:         big.NewInt(0),
		EIP158Block:         big.NewInt(0),
		ByzantiumBlock:      big.NewInt(0),
		ConstantinopleBlock: nil,
		IPBFT: &IPBFTConfig{
			Epoch:          30000,
			ProposerPolicy: 0,
		},
	}

	// TestnetChainConfig contains the chain parameters to run a node on the test network.
	TestnetChainConfig = &ChainConfig{
		NeatChainId:         "testnet",
		ChainId:             big.NewInt(2),
		HomesteadBlock:      big.NewInt(0),
		EIP150Block:         big.NewInt(0),
		EIP150Hash:          common.HexToHash("0x2086799aeebeae135c246c65021c82b4e15a2c451340993aacfd2751886514f0"),
		EIP155Block:         big.NewInt(0),
		EIP158Block:         big.NewInt(0),
		ByzantiumBlock:      big.NewInt(0),
		ConstantinopleBlock: nil,
		IPBFT: &IPBFTConfig{
			Epoch:          30000,
			ProposerPolicy: 0,
		},
	}

	TestChainConfig = &ChainConfig{"", big.NewInt(1), big.NewInt(0), big.NewInt(0), common.Hash{}, big.NewInt(0), big.NewInt(0), big.NewInt(0), nil, nil, nil}
	TestRules       = TestChainConfig.Rules(new(big.Int))
)
View Source 
var (
	// GasTableHomestead contain the gas prices for
	// the homestead phase.
	GasTableHomestead = GasTable{
		ExtcodeSize: 20,
		ExtcodeCopy: 20,
		Balance:     20,
		SLoad:       50,
		Calls:       40,
		Suicide:     0,
		ExpByte:     10,
	}

	// GasTableEIP150 contain the gas re-prices for
	// the EIP150 phase.
	GasTableEIP150 = GasTable{
		ExtcodeSize: 700,
		ExtcodeCopy: 700,
		Balance:     400,
		SLoad:       200,
		Calls:       700,
		Suicide:     5000,
		ExpByte:     10,

		CreateBySuicide: 25000,
	}
	// GasTableEIP158 contain the gas re-prices for
	// the EIP155/EIP158 phase.
	GasTableEIP158 = GasTable{
		ExtcodeSize: 700,
		ExtcodeCopy: 700,
		Balance:     400,
		SLoad:       200,
		Calls:       700,
		Suicide:     5000,
		ExpByte:     50,

		CreateBySuicide: 25000,
	}
	// GasTableConstantinople contain the gas re-prices for
	// the constantinople phase.
	GasTableConstantinople = GasTable{
		ExtcodeSize: 700,
		ExtcodeCopy: 700,
		ExtcodeHash: 400,
		Balance:     400,
		SLoad:       200,
		Calls:       700,
		Suicide:     5000,
		ExpByte:     50,

		CreateBySuicide: 25000,
	}
)

Variables containing gas prices for different ethereum phases.

View Source 
var (
	DifficultyBoundDivisor = big.NewInt(2048)   // The bound divisor of the difficulty, used in the update calculations.
	GenesisDifficulty      = big.NewInt(131072) // Difficulty of the Genesis block.
	MinimumDifficulty      = big.NewInt(131072) // The minimum that the difficulty may ever be.
	DurationLimit          = big.NewInt(13)     // The decision boundary on the blocktime duration used to determine whether difficulty should go up or not.
)
View Source 
var DAOForkBlockExtra = common.FromHex("0x64616f2d686172642d666f726b")

DAOForkBlockExtra is the block header extra-data field to set for the DAO fork point and a number of consecutive blocks to allow fast/light syncers to correctly pick the side they want ("dao-hard-fork").

View Source 
var DAOForkExtraRange = big.NewInt(10)

DAOForkExtraRange is the number of consecutive blocks from the DAO fork point to override the extra-data in to prevent no-fork attacks.

View Source 
var DAORefundContract = common.HexToAddress("0xbf4ed7b27f1d666546e30d74d50d173d20bca754")

DAORefundContract is the address of the refund contract to send DAO balances to.

View Source 
var GenCfg = GeneralConfig{PerfTest: false}
View Source 
var MainnetBootnodes = []string{

	"enode://e4b47ca874d94e44a401bbe57dc69505852cbeeadc812b7e92ef24ba74a011a171fd9800fdbc00a109035ee0129448b879f4a6cfcc96ec717597277997480b2d@127.0.0.1:9910",
}

MainnetBootnodes are the enode URLs of the P2P bootstrap nodes running on the Neatio main network.

View Source 
var TestnetBootnodes = []string{
	"enode://e4b47ca874d94e44a401bbe57dc69505852cbeeadc812b7e92ef24ba74a011a171fd9800fdbc00a109035ee0129448b879f4a6cfcc96ec717597277997480b2d@127.0.0.1:9910",
}

TestnetBootnodes are the enode URLs of the P2P bootstrap nodes running on the Neatio test network.

View Source 
var Version = func() string {
	return fmt.Sprintf("%d.%d.%d", VersionMajor, VersionMinor, VersionPatch)
}()

Version holds the textual version string.

View Source 
var VersionWithMeta = func() string {
	v := Version
	if VersionMeta != "" {
		v += "-" + VersionMeta
	}
	return v
}()

VersionWithMeta holds the textual version string including the metadata.

Functions

func DAODrainList 

func DAODrainList() []common.Address

DAODrainList is the list of accounts whose full balances will be moved into a refund contract at the beginning of the dao-fork block.

func IsMainChain 

func IsMainChain(chainId string) bool

Check provided chain id is on main chain or not

func VersionWithCommit 

func VersionWithCommit(gitCommit string) string

Types

type ChainConfig 

type ChainConfig struct {
	NeatChainId string   `json:"intChainId"` //NeatChain id identifies the current chain
	ChainId     *big.Int `json:"chainId"`    // Chain id identifies the current chain and is used for replay protection

	HomesteadBlock *big.Int `json:"homesteadBlock,omitempty"` // Homestead switch block (nil = no fork, 0 = already homestead)

	// EIP150 implements the Gas price changes (https://github.com/ethereum/EIPs/issues/150)
	EIP150Block *big.Int    `json:"eip150Block,omitempty"` // EIP150 HF block (nil = no fork)
	EIP150Hash  common.Hash `json:"eip150Hash,omitempty"`  // EIP150 HF hash (needed for header only clients as only gas pricing changed)

	EIP155Block *big.Int `json:"eip155Block,omitempty"` // EIP155 HF block
	EIP158Block *big.Int `json:"eip158Block,omitempty"` // EIP158 HF block

	ByzantiumBlock      *big.Int `json:"byzantiumBlock,omitempty"`      // Byzantium switch block (nil = no fork, 0 = already on byzantium)
	ConstantinopleBlock *big.Int `json:"constantinopleBlock,omitempty"` // Constantinople switch block (nil = no fork, 0 = already activated)

	// Various consensus engines
	IPBFT *IPBFTConfig `json:"ipbft,omitempty"`

	ChainLogger log.Logger `json:"-"`
}

ChainConfig is the core config which determines the blockchain settings.

ChainConfig is stored in the database on a per block basis. This means that any network, identified by its genesis block, can have its own set of configuration options.

func NewChildChainConfig 

func NewChildChainConfig(childChainID string) *ChainConfig

Create a new Chain Config based on the Chain ID, for child chain creation purpose

func (*ChainConfig) CheckCompatible 

func (c *ChainConfig) CheckCompatible(newcfg *ChainConfig, height uint64) *ConfigCompatError

CheckCompatible checks whether scheduled fork transitions have been imported with a mismatching chain configuration.

func (*ChainConfig) GasTable 

func (c *ChainConfig) GasTable(num *big.Int) GasTable

GasTable returns the gas table corresponding to the current phase (homestead or homestead reprice).

The returned GasTable's fields shouldn't, under any circumstances, be changed.

func (*ChainConfig) IsByzantium 

func (c *ChainConfig) IsByzantium(num *big.Int) bool

func (*ChainConfig) IsConstantinople 

func (c *ChainConfig) IsConstantinople(num *big.Int) bool

func (*ChainConfig) IsEIP150 

func (c *ChainConfig) IsEIP150(num *big.Int) bool

func (*ChainConfig) IsEIP155 

func (c *ChainConfig) IsEIP155(num *big.Int) bool

func (*ChainConfig) IsEIP158 

func (c *ChainConfig) IsEIP158(num *big.Int) bool

func (*ChainConfig) IsEWASM 

func (c *ChainConfig) IsEWASM(num *big.Int) bool

func (*ChainConfig) IsHomestead 

func (c *ChainConfig) IsHomestead(num *big.Int) bool

IsHomestead returns whether num is either equal to the homestead block or greater.

func (*ChainConfig) IsMainChain 

func (c *ChainConfig) IsMainChain() bool

Check whether is on main chain or not

func (*ChainConfig) Rules 

func (c *ChainConfig) Rules(num *big.Int) Rules

func (*ChainConfig) String 

func (c *ChainConfig) String() string

String implements the fmt.Stringer interface.

type ConfigCompatError 

type ConfigCompatError struct {
	What string
	// block numbers of the stored and new configurations
	StoredConfig, NewConfig *big.Int
	// the block number to which the local chain must be rewound to correct the error
	RewindTo uint64
}

ConfigCompatError is raised if the locally-stored blockchain is initialised with a ChainConfig that would alter the past.

func (*ConfigCompatError) Error 

func (err *ConfigCompatError) Error() string

type GasTable 

type GasTable struct {
	ExtcodeSize uint64
	ExtcodeCopy uint64
	ExtcodeHash uint64
	Balance     uint64
	SLoad       uint64
	Calls       uint64
	Suicide     uint64

	ExpByte uint64

	// CreateBySuicide occurs when the
	// refunded account is one that does
	// not exist. This logic is similar
	// to call. May be left nil. Nil means
	// not charged.
	CreateBySuicide uint64
}

GasTable organizes gas prices for different ethereum phases.

type GeneralConfig 

type GeneralConfig struct {

	// Whether doing performance test, will remove some limitations and cause system more frigile
	PerfTest bool `json:"perfTest,omitempty"`
}

configuations in this structure is read-only, it gives a way to put/get general settings

type IPBFTConfig 

type IPBFTConfig struct {
	Epoch          uint64 `json:"epoch"`  // Epoch length to reset votes and checkpoint
	ProposerPolicy uint64 `json:"policy"` // The policy for proposer selection
}

IPBFTConfig is the consensus engine configs for Istanbul based sealing.

func (*IPBFTConfig) String 

func (c *IPBFTConfig) String() string

String implements the stringer interface, returning the consensus engine details.

type Rules 

type Rules struct {
	ChainId                                                 *big.Int
	IsHomestead, IsEIP150, IsEIP155, IsEIP158               bool
	IsByzantium, IsConstantinople, IsPetersburg, IsIstanbul bool
}

Rules wraps ChainConfig and is merely syntatic sugar or can be used for functions that do not have or require information about the block.

Rules is a one time interface meaning that it shouldn't be used in between transition phases.

Source Files

View all Source files

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL
go.dev uses cookies from Google to deliver and enhance the quality of its services and to analyze traffic. Learn more.