server

package
v0.4.4 Latest Latest
Warning

This package is not in the latest version of its module.

 Go to latest Published: Jun 24, 2014 License: Apache-2.0 Imports: 39 Imported by: 0

Documentation

Index

Constants

View Source 
const (
	// DefaultActiveSize is the default number of active followers allowed.
	DefaultActiveSize = 9

	// MinActiveSize is the minimum active size allowed.
	MinActiveSize = 3

	// DefaultRemoveDelay is the default elapsed time before removal.
	DefaultRemoveDelay = float64((30 * time.Minute) / time.Second)

	// MinRemoveDelay is the minimum remove delay allowed.
	MinRemoveDelay = float64((2 * time.Second) / time.Second)

	// DefaultSyncInterval is the default interval for cluster sync.
	DefaultSyncInterval = float64((5 * time.Second) / time.Second)

	// MinSyncInterval is the minimum sync interval allowed.
	MinSyncInterval = float64((1 * time.Second) / time.Second)
)
View Source 
const (
	// MaxHeartbeatTimeoutBackoff is the maximum number of seconds before we warn
	// the user again about a peer not accepting heartbeats.
	MaxHeartbeatTimeoutBackoff = 15 * time.Second

	// ThresholdMonitorTimeout is the time between log notifications that the
	// Raft heartbeat is too close to the election timeout.
	ThresholdMonitorTimeout = 5 * time.Second

	// ActiveMonitorTimeout is the time between checks on the active size of
	// the cluster. If the active size is bigger than the actual size then
	// etcd attempts to demote to bring it to the correct number.
	ActiveMonitorTimeout = 1 * time.Second

	// PeerActivityMonitorTimeout is the time between checks for dead nodes in
	// the cluster.
	PeerActivityMonitorTimeout = 1 * time.Second

	// The location of cluster config in key space.
	ClusterConfigKey = "/_etcd/config"
)
View Source 
const RegistryKey = "/_etcd/machines"

The location of the peer URL data.

View Source 
const ReleaseVersion = "0.4.4"
View Source 
const Version = "v2"

Variables

This section is empty.

Functions

func NewListener 

func NewListener(scheme, addr string, cfg *tls.Config) net.Listener

NewListener creates a net.Listener If the given scheme is "https", it will use TLS config to set listener. If any error happens, this function will call log.Fatal

func NewPackageStats 

func NewPackageStats(now time.Time, size int) *packageStats

NewPackageStats creates a pacakgeStats and return the pointer to it.

func NewRaftFollowersStats 

func NewRaftFollowersStats(name string) *raftFollowersStats

func NewRaftServerStats 

func NewRaftServerStats(name string) *raftServerStats

func NewTransporter 

func NewTransporter(followersStats *raftFollowersStats, serverStats *raftServerStats, registry *Registry, dialTimeout, requestTimeout, responseHeaderTimeout time.Duration) *transporter

Create transporter using by raft server Create http or https transporter based on whether the user give the server cert and key

func TLSServerConfig added in v0.4.0 

func TLSServerConfig(info *TLSInfo) *tls.Config

TLSServerConfig generates tls configuration based on TLSInfo If any error happens, this function will call log.Fatal

func Usage 

func Usage() string

Usage returns the usage message for etcd.

Types

type Client added in v0.4.0 

type Client struct {
	http.Client
}

Client sends various requests using HTTP API. It is different from raft communication, and doesn't record anything in the log. The argument url is required to contain scheme and host only, and there is no trailing slash in it. Public functions return "etcd/error".Error intentionally to figure out etcd error code easily. TODO(yichengq): It is similar to go-etcd. But it could have many efforts to integrate the two. Leave it for further discussion.

func NewClient added in v0.4.0 

func NewClient(transport http.RoundTripper) *Client

func (*Client) AddMachine added in v0.4.0 

func (c *Client) AddMachine(url string, cmd *JoinCommand) (uint64, *etcdErr.Error)

AddMachine adds machine to the cluster. The first return value is the commit index of join command.

func (*Client) CheckVersion added in v0.4.0 

func (c *Client) CheckVersion(url string, version int) (bool, *etcdErr.Error)

CheckVersion returns true when the version check on the server returns 200.

func (*Client) GetClusterConfig added in v0.4.0 

func (c *Client) GetClusterConfig(url string) (*ClusterConfig, *etcdErr.Error)

func (*Client) GetMachines added in v0.4.0 

func (c *Client) GetMachines(url string) ([]*machineMessage, *etcdErr.Error)

func (*Client) GetVersion added in v0.4.0 

func (c *Client) GetVersion(url string) (int, *etcdErr.Error)

GetVersion fetches the peer version of a cluster.

type ClusterConfig added in v0.4.0 

type ClusterConfig struct {
	// ActiveSize is the maximum number of node that can join as Raft followers.
	// Nodes that join the cluster after the limit is reached are standbys.
	ActiveSize int `json:"activeSize"`

	// RemoveDelay is the amount of time, in seconds, after a node is
	// unreachable that it will be swapped out as a standby node.
	RemoveDelay float64 `json:"removeDelay"`

	// SyncInterval is the amount of time, in seconds, between
	// cluster sync when it runs in standby mode.
	SyncInterval float64 `json:"syncInterval"`
}

ClusterConfig represents cluster-wide configuration settings.

func NewClusterConfig added in v0.4.0 

func NewClusterConfig() *ClusterConfig

NewClusterConfig returns a cluster configuration with default settings.

type HEADResponseWriter added in v0.4.0 

type HEADResponseWriter struct {
	http.ResponseWriter
}

func (*HEADResponseWriter) Write added in v0.4.0 

func (w *HEADResponseWriter) Write([]byte) (int, error)

type JoinCommand 

type JoinCommand struct {
	MinVersion int    `json:"minVersion"`
	MaxVersion int    `json:"maxVersion"`
	Name       string `json:"name"`
	RaftURL    string `json:"raftURL"`
	EtcdURL    string `json:"etcdURL"`
}

JoinCommand represents a request to join the cluster. The command returns the join_index (Uvarint).

func (*JoinCommand) Apply 

func (c *JoinCommand) Apply(context raft.Context) (interface{}, error)

Apply attempts to join a machine to the cluster.

func (*JoinCommand) CommandName 

func (c *JoinCommand) CommandName() string

The name of the join command in the log

func (*JoinCommand) NodeName 

func (c *JoinCommand) NodeName() string

type PeerServer 

type PeerServer struct {
	Config PeerServerConfig

	sync.Mutex
	// contains filtered or unexported fields
}

func NewPeerServer 

func NewPeerServer(psConfig PeerServerConfig, client *Client, registry *Registry, store store.Store, mb *metrics.Bucket, followersStats *raftFollowersStats, serverStats *raftServerStats) *PeerServer

func (*PeerServer) AppendEntriesHttpHandler 

func (ps *PeerServer) AppendEntriesHttpHandler(w http.ResponseWriter, req *http.Request)

Response to append entries request

func (*PeerServer) ClusterConfig added in v0.4.0 

func (s *PeerServer) ClusterConfig() *ClusterConfig

ClusterConfig retrieves the current cluster configuration.

func (*PeerServer) EtcdURLHttpHandler 

func (ps *PeerServer) EtcdURLHttpHandler(w http.ResponseWriter, req *http.Request)

Get the port that listening for etcd connecting of the server

func (*PeerServer) FindCluster added in v0.4.0 

func (s *PeerServer) FindCluster(discoverURL string, peers []string) (toStart bool, possiblePeers []string, err error)

Try all possible ways to find clusters to join Include log data in -data-dir, -discovery and -peers

Peer discovery follows this order: 1. previous peers in -data-dir 2. -discovery 3. -peers

func (*PeerServer) GetLogHttpHandler 

func (ps *PeerServer) GetLogHttpHandler(w http.ResponseWriter, req *http.Request)

Get all the current logs

func (*PeerServer) HTTPHandler 

func (s *PeerServer) HTTPHandler() http.Handler

func (*PeerServer) InitNewCluster added in v0.4.0 

func (s *PeerServer) InitNewCluster(clusterConfig *ClusterConfig)

func (*PeerServer) JoinHttpHandler 

func (ps *PeerServer) JoinHttpHandler(w http.ResponseWriter, req *http.Request)

Response to the join request

func (*PeerServer) NameHttpHandler 

func (ps *PeerServer) NameHttpHandler(w http.ResponseWriter, req *http.Request)

Response to the name request

func (*PeerServer) PeerStats 

func (s *PeerServer) PeerStats() []byte

func (*PeerServer) RaftServer 

func (s *PeerServer) RaftServer() raft.Server

Retrieves the underlying Raft server.

func (*PeerServer) RemoveHttpHandler 

func (ps *PeerServer) RemoveHttpHandler(w http.ResponseWriter, req *http.Request)

Response to remove request

func (*PeerServer) RemoveNotify added in v0.4.0 

func (s *PeerServer) RemoveNotify() <-chan bool

RemoveNotify notifies the server is removed from peer mode due to removal from the cluster.

func (*PeerServer) SetClusterConfig added in v0.4.0 

func (s *PeerServer) SetClusterConfig(c *ClusterConfig)

SetClusterConfig updates the current cluster configuration. Adjusting the active size will cause cluster to add or remove machines to match the new size.

func (*PeerServer) SetJoinIndex added in v0.4.0 

func (s *PeerServer) SetJoinIndex(joinIndex uint64)

func (*PeerServer) SetRaftServer 

func (s *PeerServer) SetRaftServer(raftServer raft.Server, snapshot bool)

func (*PeerServer) SetRegistry added in v0.4.0 

func (s *PeerServer) SetRegistry(registry *Registry)

func (*PeerServer) SetServer 

func (s *PeerServer) SetServer(server *Server)

Associates the client server with the peer server.

func (*PeerServer) SetStore added in v0.4.0 

func (s *PeerServer) SetStore(store store.Store)

func (*PeerServer) SnapshotHttpHandler 

func (ps *PeerServer) SnapshotHttpHandler(w http.ResponseWriter, req *http.Request)

Response to recover from snapshot request

func (*PeerServer) SnapshotRecoveryHttpHandler 

func (ps *PeerServer) SnapshotRecoveryHttpHandler(w http.ResponseWriter, req *http.Request)

Response to recover from snapshot request

func (*PeerServer) Start 

func (s *PeerServer) Start(snapshot bool, clusterConfig *ClusterConfig) error

Start starts the raft server. The function assumes that join has been accepted successfully.

func (*PeerServer) Stats 

func (s *PeerServer) Stats() []byte

func (*PeerServer) Stop 

func (s *PeerServer) Stop()

Stop stops the server gracefully.

func (*PeerServer) Upgradable 

func (s *PeerServer) Upgradable() error

Upgradable checks whether all peers in a cluster support an upgrade to the next store version.

func (*PeerServer) UpgradeHttpHandler 

func (ps *PeerServer) UpgradeHttpHandler(w http.ResponseWriter, req *http.Request)

Upgrades the current store version to the next version.

func (*PeerServer) VersionCheckHttpHandler 

func (ps *PeerServer) VersionCheckHttpHandler(w http.ResponseWriter, req *http.Request)

Checks whether a given version is supported.

func (*PeerServer) VersionHttpHandler 

func (ps *PeerServer) VersionHttpHandler(w http.ResponseWriter, req *http.Request)

Response to the name request

func (*PeerServer) VoteHttpHandler 

func (ps *PeerServer) VoteHttpHandler(w http.ResponseWriter, req *http.Request)

Response to vote request

type PeerServerConfig 

type PeerServerConfig struct {
	Name          string
	Scheme        string
	URL           string
	SnapshotCount int
	RetryTimes    int
	RetryInterval float64
}

type Registry 

type Registry struct {
	sync.Mutex
	// contains filtered or unexported fields
}

The Registry stores URL information for nodes.

func NewRegistry 

func NewRegistry(s store.Store) *Registry

Creates a new Registry.

func (*Registry) ClientURL 

func (r *Registry) ClientURL(name string) (string, bool)

Retrieves the client URL for a given node by name.

func (*Registry) ClientURLs 

func (r *Registry) ClientURLs(leaderName, selfName string) []string

Retrieves the Client URLs for all nodes.

func (*Registry) Count 

func (r *Registry) Count() int

Count returns the number of peers in the cluster.

func (*Registry) Exists added in v0.4.0 

func (r *Registry) Exists(name string) bool

Exists checks if a peer with the given name exists.

func (*Registry) Invalidate 

func (r *Registry) Invalidate(name string)

Removes a node from the cache.

func (*Registry) Names added in v0.4.0 

func (r *Registry) Names() []string

Names returns a list of cached peer names.

func (*Registry) PeerHost added in v0.4.0 

func (r *Registry) PeerHost(name string) (string, bool)

TODO(yichengq): have all of the code use a full URL with scheme and remove this method PeerHost retrieves the host part of peer URL for a given node by name.

func (*Registry) PeerURL 

func (r *Registry) PeerURL(name string) (string, bool)

Retrieves the peer URL for a given node by name.

func (*Registry) PeerURLs 

func (r *Registry) PeerURLs(leaderName, selfName string) []string

Retrieves the Peer URLs for all nodes.

func (*Registry) Register 

func (r *Registry) Register(name string, peerURL string, machURL string) error

Register adds a peer to the registry.

func (*Registry) Unregister 

func (r *Registry) Unregister(name string) error

Unregister removes a peer from the registry.

func (*Registry) UpdatePeerURL added in v0.4.0 

func (r *Registry) UpdatePeerURL(name string, peerURL string) error

UpdatePeerURL updates peer URL in registry

type RemoveCommand 

type RemoveCommand struct {
	Name string `json:"name"`
}

The RemoveCommand removes a server from the cluster.

func (*RemoveCommand) Apply 

func (c *RemoveCommand) Apply(context raft.Context) (interface{}, error)

Remove a server from the cluster

func (*RemoveCommand) CommandName 

func (c *RemoveCommand) CommandName() string

The name of the remove command in the log

type Server 

type Server struct {
	Name string
	// contains filtered or unexported fields
}

This is the default implementation of the Server interface.

func New 

func New(name, url string, peerServer *PeerServer, registry *Registry, store store.Store, mb *metrics.Bucket) *Server

Creates a new Server.

func (*Server) ClientURL 

func (s *Server) ClientURL(name string) (string, bool)

ClientURL retrieves the Client URL for a given node name.

func (*Server) CommitIndex 

func (s *Server) CommitIndex() uint64

The current Raft committed index.

func (*Server) Dispatch 

func (s *Server) Dispatch(c raft.Command, w http.ResponseWriter, req *http.Request) error

Dispatch command to the current leader

func (*Server) EnableTracing 

func (s *Server) EnableTracing()

func (*Server) GetLeaderHandler 

func (s *Server) GetLeaderHandler(w http.ResponseWriter, req *http.Request) error

Handler to return the current leader's raft address

func (*Server) GetLeaderStatsHandler 

func (s *Server) GetLeaderStatsHandler(w http.ResponseWriter, req *http.Request) error

Retrieves stats on the leader.

func (*Server) GetMetricsHandler 

func (s *Server) GetMetricsHandler(w http.ResponseWriter, req *http.Request) error

Retrieves metrics from bucket

func (*Server) GetPeersHandler 

func (s *Server) GetPeersHandler(w http.ResponseWriter, req *http.Request) error

Handler to return all the known peers in the current cluster.

func (*Server) GetStatsHandler 

func (s *Server) GetStatsHandler(w http.ResponseWriter, req *http.Request) error

Retrieves stats on the Raft server.

func (*Server) GetStoreStatsHandler 

func (s *Server) GetStoreStatsHandler(w http.ResponseWriter, req *http.Request) error

Retrieves stats on the leader.

func (*Server) GetVersionHandler 

func (s *Server) GetVersionHandler(w http.ResponseWriter, req *http.Request) error

Handler to return the current version of etcd.

func (*Server) HTTPHandler 

func (s *Server) HTTPHandler() http.Handler

func (*Server) Leader 

func (s *Server) Leader() string

The node name of the leader in the cluster.

func (*Server) PeerHost added in v0.4.0 

func (s *Server) PeerHost(name string) (string, bool)

PeerHost retrieves the host part of Peer URL for a given node name.

func (*Server) PeerURL 

func (s *Server) PeerURL(name string) (string, bool)

Retrives the Peer URL for a given node name.

func (*Server) SetRegistry added in v0.4.0 

func (s *Server) SetRegistry(registry *Registry)

func (*Server) SetStore added in v0.4.0 

func (s *Server) SetStore(store store.Store)

func (*Server) SpeedTestHandler 

func (s *Server) SpeedTestHandler(w http.ResponseWriter, req *http.Request) error

Executes a speed test to evaluate the performance of update replication.

func (*Server) State 

func (s *Server) State() string

The current state of the server in the cluster.

func (*Server) Store 

func (s *Server) Store() store.Store

Returns a reference to the Store.

func (*Server) Term 

func (s *Server) Term() uint64

The current Raft term.

func (*Server) URL 

func (s *Server) URL() string

The server URL.

type SetClusterConfigCommand added in v0.4.0 

type SetClusterConfigCommand struct {
	Config *ClusterConfig `json:"config"`
}

SetClusterConfigCommand sets the cluster-level configuration.

func (*SetClusterConfigCommand) Apply added in v0.4.0 

func (c *SetClusterConfigCommand) Apply(context raft.Context) (interface{}, error)

Apply updates the cluster configuration.

func (*SetClusterConfigCommand) CommandName added in v0.4.0 

func (c *SetClusterConfigCommand) CommandName() string

CommandName returns the name of the command.

type StandbyServer added in v0.4.0 

type StandbyServer struct {
	Config StandbyServerConfig

	sync.Mutex
	// contains filtered or unexported fields
}

func NewStandbyServer added in v0.4.0 

func NewStandbyServer(config StandbyServerConfig, client *Client) *StandbyServer

func (*StandbyServer) ClientHTTPHandler added in v0.4.0 

func (s *StandbyServer) ClientHTTPHandler() http.Handler

func (*StandbyServer) ClusterLeader added in v0.4.0 

func (s *StandbyServer) ClusterLeader() *machineMessage

func (*StandbyServer) ClusterSize added in v0.4.0 

func (s *StandbyServer) ClusterSize() int

func (*StandbyServer) ClusterURLs added in v0.4.0 

func (s *StandbyServer) ClusterURLs() []string

func (*StandbyServer) IsRunning added in v0.4.0 

func (s *StandbyServer) IsRunning() bool

func (*StandbyServer) JoinIndex added in v0.4.0 

func (s *StandbyServer) JoinIndex() uint64

func (*StandbyServer) RemoveNotify added in v0.4.0 

func (s *StandbyServer) RemoveNotify() <-chan bool

RemoveNotify notifies the server is removed from standby mode and ready for peer mode. It should have joined the cluster successfully.

func (*StandbyServer) SetRaftServer added in v0.4.3 

func (s *StandbyServer) SetRaftServer(raftServer raft.Server)

func (*StandbyServer) SetSyncInterval added in v0.4.0 

func (s *StandbyServer) SetSyncInterval(second float64)

func (*StandbyServer) Start added in v0.4.0 

func (s *StandbyServer) Start()

func (*StandbyServer) Stop added in v0.4.0 

func (s *StandbyServer) Stop()

Stop stops the server gracefully.

func (*StandbyServer) SyncCluster added in v0.4.0 

func (s *StandbyServer) SyncCluster(peers []string) error

type StandbyServerConfig added in v0.4.0 

type StandbyServerConfig struct {
	Name       string
	PeerScheme string
	PeerURL    string
	ClientURL  string
	DataDir    string
}

type TLSInfo 

type TLSInfo struct {
	CertFile string `json:"CertFile"`
	KeyFile  string `json:"KeyFile"`
	CAFile   string `json:"CAFile"`
}

TLSInfo holds the SSL certificates paths.

func (TLSInfo) ClientConfig 

func (info TLSInfo) ClientConfig() (*tls.Config, error)

Generates a tls.Config object for a client from the given files.

func (TLSInfo) Scheme 

func (info TLSInfo) Scheme() string

func (TLSInfo) ServerConfig 

func (info TLSInfo) ServerConfig() (*tls.Config, error)

Generates a tls.Config object for a server from the given files.

Source Files

View all Source files

Directories

Path Synopsis

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL
go.dev uses cookies from Google to deliver and enhance the quality of its services and to analyze traffic. Learn more.