elbv2

package
v1.4.16-0...-c0d7d32 Latest Latest
Warning

This package is not in the latest version of its module.

 Go to latest Published: Oct 7, 2016 License: Apache-2.0 Imports: 8 Imported by: 0

Documentation

Overview

Package elbv2 provides a client for Elastic Load Balancing.

Index

Examples

Constants

View Source 
const (
	// LoadBalancerSchemeEnumInternetFacing is a LoadBalancerSchemeEnum enum value
	LoadBalancerSchemeEnumInternetFacing = "internet-facing"

	// LoadBalancerSchemeEnumInternal is a LoadBalancerSchemeEnum enum value
	LoadBalancerSchemeEnumInternal = "internal"
)
View Source 
const (
	// LoadBalancerStateEnumActive is a LoadBalancerStateEnum enum value
	LoadBalancerStateEnumActive = "active"

	// LoadBalancerStateEnumProvisioning is a LoadBalancerStateEnum enum value
	LoadBalancerStateEnumProvisioning = "provisioning"

	// LoadBalancerStateEnumFailed is a LoadBalancerStateEnum enum value
	LoadBalancerStateEnumFailed = "failed"
)
View Source 
const (
	// ProtocolEnumHttp is a ProtocolEnum enum value
	ProtocolEnumHttp = "HTTP"

	// ProtocolEnumHttps is a ProtocolEnum enum value
	ProtocolEnumHttps = "HTTPS"
)
View Source 
const (
	// TargetHealthReasonEnumElbRegistrationInProgress is a TargetHealthReasonEnum enum value
	TargetHealthReasonEnumElbRegistrationInProgress = "Elb.RegistrationInProgress"

	// TargetHealthReasonEnumElbInitialHealthChecking is a TargetHealthReasonEnum enum value
	TargetHealthReasonEnumElbInitialHealthChecking = "Elb.InitialHealthChecking"

	// TargetHealthReasonEnumTargetResponseCodeMismatch is a TargetHealthReasonEnum enum value
	TargetHealthReasonEnumTargetResponseCodeMismatch = "Target.ResponseCodeMismatch"

	// TargetHealthReasonEnumTargetTimeout is a TargetHealthReasonEnum enum value
	TargetHealthReasonEnumTargetTimeout = "Target.Timeout"

	// TargetHealthReasonEnumTargetFailedHealthChecks is a TargetHealthReasonEnum enum value
	TargetHealthReasonEnumTargetFailedHealthChecks = "Target.FailedHealthChecks"

	// TargetHealthReasonEnumTargetNotRegistered is a TargetHealthReasonEnum enum value
	TargetHealthReasonEnumTargetNotRegistered = "Target.NotRegistered"

	// TargetHealthReasonEnumTargetNotInUse is a TargetHealthReasonEnum enum value
	TargetHealthReasonEnumTargetNotInUse = "Target.NotInUse"

	// TargetHealthReasonEnumTargetDeregistrationInProgress is a TargetHealthReasonEnum enum value
	TargetHealthReasonEnumTargetDeregistrationInProgress = "Target.DeregistrationInProgress"

	// TargetHealthReasonEnumTargetInvalidState is a TargetHealthReasonEnum enum value
	TargetHealthReasonEnumTargetInvalidState = "Target.InvalidState"

	// TargetHealthReasonEnumElbInternalError is a TargetHealthReasonEnum enum value
	TargetHealthReasonEnumElbInternalError = "Elb.InternalError"
)
View Source 
const (
	// TargetHealthStateEnumInitial is a TargetHealthStateEnum enum value
	TargetHealthStateEnumInitial = "initial"

	// TargetHealthStateEnumHealthy is a TargetHealthStateEnum enum value
	TargetHealthStateEnumHealthy = "healthy"

	// TargetHealthStateEnumUnhealthy is a TargetHealthStateEnum enum value
	TargetHealthStateEnumUnhealthy = "unhealthy"

	// TargetHealthStateEnumUnused is a TargetHealthStateEnum enum value
	TargetHealthStateEnumUnused = "unused"

	// TargetHealthStateEnumDraining is a TargetHealthStateEnum enum value
	TargetHealthStateEnumDraining = "draining"
)
View Source 
const (
	// ActionTypeEnumForward is a ActionTypeEnum enum value
	ActionTypeEnumForward = "forward"
)
View Source 
const (
	// LoadBalancerTypeEnumApplication is a LoadBalancerTypeEnum enum value
	LoadBalancerTypeEnumApplication = "application"
)
View Source 
const ServiceName = "elasticloadbalancing"

A ServiceName is the name of the service the client will make API calls to.

Variables

This section is empty.

Functions

This section is empty.

Types

type Action 

type Action struct {

	// The Amazon Resource Name (ARN) of the target group.
	//
	// TargetGroupArn is a required field
	TargetGroupArn *string `type:"string" required:"true"`

	// The type of action.
	//
	// Type is a required field
	Type *string `type:"string" required:"true" enum:"ActionTypeEnum"`
	// contains filtered or unexported fields
}

Information about an action.

func (Action) GoString 

func (s Action) GoString() string

GoString returns the string representation

func (Action) String 

func (s Action) String() string

String returns the string representation

func (*Action) Validate 

func (s *Action) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type AddTagsInput 

type AddTagsInput struct {

	// The Amazon Resource Name (ARN) of the resource.
	//
	// ResourceArns is a required field
	ResourceArns []*string `type:"list" required:"true"`

	// The tags. Each resource can have a maximum of 10 tags.
	//
	// Tags is a required field
	Tags []*Tag `min:"1" type:"list" required:"true"`
	// contains filtered or unexported fields
}

Contains the parameters for AddTags.

func (AddTagsInput) GoString 

func (s AddTagsInput) GoString() string

GoString returns the string representation

func (AddTagsInput) String 

func (s AddTagsInput) String() string

String returns the string representation

func (*AddTagsInput) Validate 

func (s *AddTagsInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type AddTagsOutput 

type AddTagsOutput struct {
	// contains filtered or unexported fields
}

Contains the output of AddTags.

func (AddTagsOutput) GoString 

func (s AddTagsOutput) GoString() string

GoString returns the string representation

func (AddTagsOutput) String 

func (s AddTagsOutput) String() string

String returns the string representation

type AvailabilityZone 

type AvailabilityZone struct {

	// The ID of the subnet.
	SubnetId *string `type:"string"`

	// The name of the Availability Zone.
	ZoneName *string `type:"string"`
	// contains filtered or unexported fields
}

Information about an Availability Zone.

func (AvailabilityZone) GoString 

func (s AvailabilityZone) GoString() string

GoString returns the string representation

func (AvailabilityZone) String 

func (s AvailabilityZone) String() string

String returns the string representation

type Certificate 

type Certificate struct {

	// The Amazon Resource Name (ARN) of the certificate.
	CertificateArn *string `type:"string"`
	// contains filtered or unexported fields
}

Information about an SSL server certificate deployed on a load balancer.

func (Certificate) GoString 

func (s Certificate) GoString() string

GoString returns the string representation

func (Certificate) String 

func (s Certificate) String() string

String returns the string representation

type Cipher 

type Cipher struct {

	// The name of the cipher.
	Name *string `type:"string"`

	// The priority of the cipher.
	Priority *int64 `type:"integer"`
	// contains filtered or unexported fields
}

Information about a cipher used in a policy.

func (Cipher) GoString 

func (s Cipher) GoString() string

GoString returns the string representation

func (Cipher) String 

func (s Cipher) String() string

String returns the string representation

type CreateListenerInput 

type CreateListenerInput struct {

	// The SSL server certificate. You must provide exactly one certificate if the
	// protocol is HTTPS.
	Certificates []*Certificate `type:"list"`

	// The default actions for the listener.
	//
	// DefaultActions is a required field
	DefaultActions []*Action `type:"list" required:"true"`

	// The Amazon Resource Name (ARN) of the load balancer.
	//
	// LoadBalancerArn is a required field
	LoadBalancerArn *string `type:"string" required:"true"`

	// The port on which the load balancer is listening.
	//
	// Port is a required field
	Port *int64 `min:"1" type:"integer" required:"true"`

	// The protocol for connections from clients to the load balancer.
	//
	// Protocol is a required field
	Protocol *string `type:"string" required:"true" enum:"ProtocolEnum"`

	// The security policy that defines which ciphers and protocols are supported.
	// The default is the current predefined security policy.
	SslPolicy *string `type:"string"`
	// contains filtered or unexported fields
}

Contains the parameters for CreateListener.

func (CreateListenerInput) GoString 

func (s CreateListenerInput) GoString() string

GoString returns the string representation

func (CreateListenerInput) String 

func (s CreateListenerInput) String() string

String returns the string representation

func (*CreateListenerInput) Validate 

func (s *CreateListenerInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type CreateListenerOutput 

type CreateListenerOutput struct {

	// Information about the listener.
	Listeners []*Listener `type:"list"`
	// contains filtered or unexported fields
}

Contains the output of CreateListener.

func (CreateListenerOutput) GoString 

func (s CreateListenerOutput) GoString() string

GoString returns the string representation

func (CreateListenerOutput) String 

func (s CreateListenerOutput) String() string

String returns the string representation

type CreateLoadBalancerInput 

type CreateLoadBalancerInput struct {

	// The name of the load balancer.
	//
	// This name must be unique within your AWS account, can have a maximum of
	// 32 characters, must contain only alphanumeric characters or hyphens, and
	// must not begin or end with a hyphen.
	//
	// Name is a required field
	Name *string `type:"string" required:"true"`

	// The nodes of an Internet-facing load balancer have public IP addresses. The
	// DNS name of an Internet-facing load balancer is publicly resolvable to the
	// public IP addresses of the nodes. Therefore, Internet-facing load balancers
	// can route requests from clients over the Internet.
	//
	// The nodes of an internal load balancer have only private IP addresses. The
	// DNS name of an internal load balancer is publicly resolvable to the private
	// IP addresses of the nodes. Therefore, internal load balancers can only route
	// requests from clients with access to the VPC for the load balancer.
	//
	// The default is an Internet-facing load balancer.
	Scheme *string `type:"string" enum:"LoadBalancerSchemeEnum"`

	// The IDs of the security groups to assign to the load balancer.
	SecurityGroups []*string `type:"list"`

	// The IDs of the subnets to attach to the load balancer. You can specify only
	// one subnet per Availability Zone. You must specify subnets from at least
	// two Availability Zones.
	//
	// Subnets is a required field
	Subnets []*string `type:"list" required:"true"`

	// One or more tags to assign to the load balancer.
	Tags []*Tag `min:"1" type:"list"`
	// contains filtered or unexported fields
}

Contains the parameters for CreateLoadBalancer.

func (CreateLoadBalancerInput) GoString 

func (s CreateLoadBalancerInput) GoString() string

GoString returns the string representation

func (CreateLoadBalancerInput) String 

func (s CreateLoadBalancerInput) String() string

String returns the string representation

func (*CreateLoadBalancerInput) Validate 

func (s *CreateLoadBalancerInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type CreateLoadBalancerOutput 

type CreateLoadBalancerOutput struct {

	// Information about the load balancer.
	LoadBalancers []*LoadBalancer `type:"list"`
	// contains filtered or unexported fields
}

Contains the output of CreateLoadBalancer.

func (CreateLoadBalancerOutput) GoString 

func (s CreateLoadBalancerOutput) GoString() string

GoString returns the string representation

func (CreateLoadBalancerOutput) String 

func (s CreateLoadBalancerOutput) String() string

String returns the string representation

type CreateRuleInput 

type CreateRuleInput struct {

	// The actions for the rule.
	//
	// Actions is a required field
	Actions []*Action `type:"list" required:"true"`

	// The conditions.
	//
	// Conditions is a required field
	Conditions []*RuleCondition `type:"list" required:"true"`

	// The Amazon Resource Name (ARN) of the listener.
	//
	// ListenerArn is a required field
	ListenerArn *string `type:"string" required:"true"`

	// The priority for the rule. A listener can't have multiple rules with the
	// same priority.
	//
	// Priority is a required field
	Priority *int64 `min:"1" type:"integer" required:"true"`
	// contains filtered or unexported fields
}

Contains the parameters for CreateRule.

func (CreateRuleInput) GoString 

func (s CreateRuleInput) GoString() string

GoString returns the string representation

func (CreateRuleInput) String 

func (s CreateRuleInput) String() string

String returns the string representation

func (*CreateRuleInput) Validate 

func (s *CreateRuleInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type CreateRuleOutput 

type CreateRuleOutput struct {

	// Information about the rule.
	Rules []*Rule `type:"list"`
	// contains filtered or unexported fields
}

Contains the output of CreateRule.

func (CreateRuleOutput) GoString 

func (s CreateRuleOutput) GoString() string

GoString returns the string representation

func (CreateRuleOutput) String 

func (s CreateRuleOutput) String() string

String returns the string representation

type CreateTargetGroupInput 

type CreateTargetGroupInput struct {

	// The approximate amount of time, in seconds, between health checks of an individual
	// target. The default is 30 seconds.
	HealthCheckIntervalSeconds *int64 `min:"5" type:"integer"`

	// The ping path that is the destination on the targets for health checks. The
	// default is /.
	HealthCheckPath *string `min:"1" type:"string"`

	// The port the load balancer uses when performing health checks on targets.
	// The default is traffic-port, which indicates the port on which each target
	// receives traffic from the load balancer.
	HealthCheckPort *string `type:"string"`

	// The protocol the load balancer uses when performing health checks on targets.
	// The default is the HTTP protocol.
	HealthCheckProtocol *string `type:"string" enum:"ProtocolEnum"`

	// The amount of time, in seconds, during which no response from a target means
	// a failed health check. The default is 5 seconds.
	HealthCheckTimeoutSeconds *int64 `min:"2" type:"integer"`

	// The number of consecutive health checks successes required before considering
	// an unhealthy target healthy. The default is 5.
	HealthyThresholdCount *int64 `min:"2" type:"integer"`

	// The HTTP codes to use when checking for a successful response from a target.
	// The default is 200.
	Matcher *Matcher `type:"structure"`

	// The name of the target group.
	//
	// Name is a required field
	Name *string `type:"string" required:"true"`

	// The port on which the targets receive traffic. This port is used unless you
	// specify a port override when registering the target.
	//
	// Port is a required field
	Port *int64 `min:"1" type:"integer" required:"true"`

	// The protocol to use for routing traffic to the targets.
	//
	// Protocol is a required field
	Protocol *string `type:"string" required:"true" enum:"ProtocolEnum"`

	// The number of consecutive health check failures required before considering
	// a target unhealthy. The default is 2.
	UnhealthyThresholdCount *int64 `min:"2" type:"integer"`

	// The identifier of the virtual private cloud (VPC).
	//
	// VpcId is a required field
	VpcId *string `type:"string" required:"true"`
	// contains filtered or unexported fields
}

Contains the parameters for CreateTargetGroup.

func (CreateTargetGroupInput) GoString 

func (s CreateTargetGroupInput) GoString() string

GoString returns the string representation

func (CreateTargetGroupInput) String 

func (s CreateTargetGroupInput) String() string

String returns the string representation

func (*CreateTargetGroupInput) Validate 

func (s *CreateTargetGroupInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type CreateTargetGroupOutput 

type CreateTargetGroupOutput struct {

	// Information about the target group.
	TargetGroups []*TargetGroup `type:"list"`
	// contains filtered or unexported fields
}

Contains the output of CreateTargetGroup.

func (CreateTargetGroupOutput) GoString 

func (s CreateTargetGroupOutput) GoString() string

GoString returns the string representation

func (CreateTargetGroupOutput) String 

func (s CreateTargetGroupOutput) String() string

String returns the string representation

type DeleteListenerInput 

type DeleteListenerInput struct {

	// The Amazon Resource Name (ARN) of the listener.
	//
	// ListenerArn is a required field
	ListenerArn *string `type:"string" required:"true"`
	// contains filtered or unexported fields
}

Contains the parameters for DeleteListener.

func (DeleteListenerInput) GoString 

func (s DeleteListenerInput) GoString() string

GoString returns the string representation

func (DeleteListenerInput) String 

func (s DeleteListenerInput) String() string

String returns the string representation

func (*DeleteListenerInput) Validate 

func (s *DeleteListenerInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DeleteListenerOutput 

type DeleteListenerOutput struct {
	// contains filtered or unexported fields
}

Contains the output of DeleteListener.

func (DeleteListenerOutput) GoString 

func (s DeleteListenerOutput) GoString() string

GoString returns the string representation

func (DeleteListenerOutput) String 

func (s DeleteListenerOutput) String() string

String returns the string representation

type DeleteLoadBalancerInput 

type DeleteLoadBalancerInput struct {

	// The Amazon Resource Name (ARN) of the load balancer.
	//
	// LoadBalancerArn is a required field
	LoadBalancerArn *string `type:"string" required:"true"`
	// contains filtered or unexported fields
}

Contains the parameters for DeleteLoadBalancer.

func (DeleteLoadBalancerInput) GoString 

func (s DeleteLoadBalancerInput) GoString() string

GoString returns the string representation

func (DeleteLoadBalancerInput) String 

func (s DeleteLoadBalancerInput) String() string

String returns the string representation

func (*DeleteLoadBalancerInput) Validate 

func (s *DeleteLoadBalancerInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DeleteLoadBalancerOutput 

type DeleteLoadBalancerOutput struct {
	// contains filtered or unexported fields
}

Contains the output of DeleteLoadBalancer.

func (DeleteLoadBalancerOutput) GoString 

func (s DeleteLoadBalancerOutput) GoString() string

GoString returns the string representation

func (DeleteLoadBalancerOutput) String 

func (s DeleteLoadBalancerOutput) String() string

String returns the string representation

type DeleteRuleInput 

type DeleteRuleInput struct {

	// The Amazon Resource Name (ARN) of the rule.
	//
	// RuleArn is a required field
	RuleArn *string `type:"string" required:"true"`
	// contains filtered or unexported fields
}

Contains the parameters for DeleteRule.

func (DeleteRuleInput) GoString 

func (s DeleteRuleInput) GoString() string

GoString returns the string representation

func (DeleteRuleInput) String 

func (s DeleteRuleInput) String() string

String returns the string representation

func (*DeleteRuleInput) Validate 

func (s *DeleteRuleInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DeleteRuleOutput 

type DeleteRuleOutput struct {
	// contains filtered or unexported fields
}

Contains the output of DeleteRule.

func (DeleteRuleOutput) GoString 

func (s DeleteRuleOutput) GoString() string

GoString returns the string representation

func (DeleteRuleOutput) String 

func (s DeleteRuleOutput) String() string

String returns the string representation

type DeleteTargetGroupInput 

type DeleteTargetGroupInput struct {

	// The Amazon Resource Name (ARN) of the target group.
	//
	// TargetGroupArn is a required field
	TargetGroupArn *string `type:"string" required:"true"`
	// contains filtered or unexported fields
}

Contains the parameters for DeleteTargetGroup.

func (DeleteTargetGroupInput) GoString 

func (s DeleteTargetGroupInput) GoString() string

GoString returns the string representation

func (DeleteTargetGroupInput) String 

func (s DeleteTargetGroupInput) String() string

String returns the string representation

func (*DeleteTargetGroupInput) Validate 

func (s *DeleteTargetGroupInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DeleteTargetGroupOutput 

type DeleteTargetGroupOutput struct {
	// contains filtered or unexported fields
}

Contains the output of DeleteTargetGroup.

func (DeleteTargetGroupOutput) GoString 

func (s DeleteTargetGroupOutput) GoString() string

GoString returns the string representation

func (DeleteTargetGroupOutput) String 

func (s DeleteTargetGroupOutput) String() string

String returns the string representation

type DeregisterTargetsInput 

type DeregisterTargetsInput struct {

	// The Amazon Resource Name (ARN) of the target group.
	//
	// TargetGroupArn is a required field
	TargetGroupArn *string `type:"string" required:"true"`

	// The targets.
	//
	// Targets is a required field
	Targets []*TargetDescription `type:"list" required:"true"`
	// contains filtered or unexported fields
}

Contains the parameters for DeregisterTargets.

func (DeregisterTargetsInput) GoString 

func (s DeregisterTargetsInput) GoString() string

GoString returns the string representation

func (DeregisterTargetsInput) String 

func (s DeregisterTargetsInput) String() string

String returns the string representation

func (*DeregisterTargetsInput) Validate 

func (s *DeregisterTargetsInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DeregisterTargetsOutput 

type DeregisterTargetsOutput struct {
	// contains filtered or unexported fields
}

Contains the output of DeregisterTargets.

func (DeregisterTargetsOutput) GoString 

func (s DeregisterTargetsOutput) GoString() string

GoString returns the string representation

func (DeregisterTargetsOutput) String 

func (s DeregisterTargetsOutput) String() string

String returns the string representation

type DescribeListenersInput 

type DescribeListenersInput struct {

	// The Amazon Resource Names (ARN) of the listeners.
	ListenerArns []*string `type:"list"`

	// The Amazon Resource Name (ARN) of the load balancer.
	LoadBalancerArn *string `type:"string"`

	// The marker for the next set of results. (You received this marker from a
	// previous call.)
	Marker *string `type:"string"`

	// The maximum number of results to return with this call.
	PageSize *int64 `min:"1" type:"integer"`
	// contains filtered or unexported fields
}

Contains the parameters for DescribeListeners.

func (DescribeListenersInput) GoString 

func (s DescribeListenersInput) GoString() string

GoString returns the string representation

func (DescribeListenersInput) String 

func (s DescribeListenersInput) String() string

String returns the string representation

func (*DescribeListenersInput) Validate 

func (s *DescribeListenersInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DescribeListenersOutput 

type DescribeListenersOutput struct {

	// Information about the listeners.
	Listeners []*Listener `type:"list"`

	// The marker to use when requesting the next set of results. If there are no
	// additional results, the string is empty.
	NextMarker *string `type:"string"`
	// contains filtered or unexported fields
}

Contains the output of DescribeListeners.

func (DescribeListenersOutput) GoString 

func (s DescribeListenersOutput) GoString() string

GoString returns the string representation

func (DescribeListenersOutput) String 

func (s DescribeListenersOutput) String() string

String returns the string representation

type DescribeLoadBalancerAttributesInput 

type DescribeLoadBalancerAttributesInput struct {

	// The Amazon Resource Name (ARN) of the load balancer.
	//
	// LoadBalancerArn is a required field
	LoadBalancerArn *string `type:"string" required:"true"`
	// contains filtered or unexported fields
}

Contains the parameters for DescribeLoadBalancerAttributes.

func (DescribeLoadBalancerAttributesInput) GoString 

func (s DescribeLoadBalancerAttributesInput) GoString() string

GoString returns the string representation

func (DescribeLoadBalancerAttributesInput) String 

func (s DescribeLoadBalancerAttributesInput) String() string

String returns the string representation

func (*DescribeLoadBalancerAttributesInput) Validate 

func (s *DescribeLoadBalancerAttributesInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DescribeLoadBalancerAttributesOutput 

type DescribeLoadBalancerAttributesOutput struct {

	// Information about the load balancer attributes.
	Attributes []*LoadBalancerAttribute `type:"list"`
	// contains filtered or unexported fields
}

Contains the output of DescribeLoadBalancerAttributes.

func (DescribeLoadBalancerAttributesOutput) GoString 

func (s DescribeLoadBalancerAttributesOutput) GoString() string

GoString returns the string representation

func (DescribeLoadBalancerAttributesOutput) String 

func (s DescribeLoadBalancerAttributesOutput) String() string

String returns the string representation

type DescribeLoadBalancersInput 

type DescribeLoadBalancersInput struct {

	// The Amazon Resource Names (ARN) of the load balancers.
	LoadBalancerArns []*string `type:"list"`

	// The marker for the next set of results. (You received this marker from a
	// previous call.)
	Marker *string `type:"string"`

	// The names of the load balancers.
	Names []*string `type:"list"`

	// The maximum number of results to return with this call.
	PageSize *int64 `min:"1" type:"integer"`
	// contains filtered or unexported fields
}

Contains the parameters for DescribeLoadBalancers.

func (DescribeLoadBalancersInput) GoString 

func (s DescribeLoadBalancersInput) GoString() string

GoString returns the string representation

func (DescribeLoadBalancersInput) String 

func (s DescribeLoadBalancersInput) String() string

String returns the string representation

func (*DescribeLoadBalancersInput) Validate 

func (s *DescribeLoadBalancersInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DescribeLoadBalancersOutput 

type DescribeLoadBalancersOutput struct {

	// Information about the load balancers.
	LoadBalancers []*LoadBalancer `type:"list"`

	// The marker to use when requesting the next set of results. If there are no
	// additional results, the string is empty.
	NextMarker *string `type:"string"`
	// contains filtered or unexported fields
}

Contains the output of DescribeLoadBalancers.

func (DescribeLoadBalancersOutput) GoString 

func (s DescribeLoadBalancersOutput) GoString() string

GoString returns the string representation

func (DescribeLoadBalancersOutput) String 

func (s DescribeLoadBalancersOutput) String() string

String returns the string representation

type DescribeRulesInput 

type DescribeRulesInput struct {

	// The Amazon Resource Name (ARN) of the listener.
	ListenerArn *string `type:"string"`

	// The Amazon Resource Names (ARN) of the rules.
	RuleArns []*string `type:"list"`
	// contains filtered or unexported fields
}

Contains the parameters for DescribeRules.

func (DescribeRulesInput) GoString 

func (s DescribeRulesInput) GoString() string

GoString returns the string representation

func (DescribeRulesInput) String 

func (s DescribeRulesInput) String() string

String returns the string representation

type DescribeRulesOutput 

type DescribeRulesOutput struct {

	// Information about the rules.
	Rules []*Rule `type:"list"`
	// contains filtered or unexported fields
}

Contains the output of DescribeRules.

func (DescribeRulesOutput) GoString 

func (s DescribeRulesOutput) GoString() string

GoString returns the string representation

func (DescribeRulesOutput) String 

func (s DescribeRulesOutput) String() string

String returns the string representation

type DescribeSSLPoliciesInput 

type DescribeSSLPoliciesInput struct {

	// The marker for the next set of results. (You received this marker from a
	// previous call.)
	Marker *string `type:"string"`

	// The names of the policies.
	Names []*string `type:"list"`

	// The maximum number of results to return with this call.
	PageSize *int64 `min:"1" type:"integer"`
	// contains filtered or unexported fields
}

Contains the parameters for DescribeSSLPolicies.

func (DescribeSSLPoliciesInput) GoString 

func (s DescribeSSLPoliciesInput) GoString() string

GoString returns the string representation

func (DescribeSSLPoliciesInput) String 

func (s DescribeSSLPoliciesInput) String() string

String returns the string representation

func (*DescribeSSLPoliciesInput) Validate 

func (s *DescribeSSLPoliciesInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DescribeSSLPoliciesOutput 

type DescribeSSLPoliciesOutput struct {

	// The marker to use when requesting the next set of results. If there are no
	// additional results, the string is empty.
	NextMarker *string `type:"string"`

	// Information about the policies.
	SslPolicies []*SslPolicy `type:"list"`
	// contains filtered or unexported fields
}

Contains the output of DescribeSSLPolicies.

func (DescribeSSLPoliciesOutput) GoString 

func (s DescribeSSLPoliciesOutput) GoString() string

GoString returns the string representation

func (DescribeSSLPoliciesOutput) String 

func (s DescribeSSLPoliciesOutput) String() string

String returns the string representation

type DescribeTagsInput 

type DescribeTagsInput struct {

	// The Amazon Resource Names (ARN) of the resources.
	//
	// ResourceArns is a required field
	ResourceArns []*string `type:"list" required:"true"`
	// contains filtered or unexported fields
}

Contains the parameters for DescribeTags.

func (DescribeTagsInput) GoString 

func (s DescribeTagsInput) GoString() string

GoString returns the string representation

func (DescribeTagsInput) String 

func (s DescribeTagsInput) String() string

String returns the string representation

func (*DescribeTagsInput) Validate 

func (s *DescribeTagsInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DescribeTagsOutput 

type DescribeTagsOutput struct {

	// Information about the tags.
	TagDescriptions []*TagDescription `type:"list"`
	// contains filtered or unexported fields
}

Contains the output of DescribeTags.

func (DescribeTagsOutput) GoString 

func (s DescribeTagsOutput) GoString() string

GoString returns the string representation

func (DescribeTagsOutput) String 

func (s DescribeTagsOutput) String() string

String returns the string representation

type DescribeTargetGroupAttributesInput 

type DescribeTargetGroupAttributesInput struct {

	// The Amazon Resource Name (ARN) of the target group.
	//
	// TargetGroupArn is a required field
	TargetGroupArn *string `type:"string" required:"true"`
	// contains filtered or unexported fields
}

Contains the parameters for DescribeTargetGroupAttributes.

func (DescribeTargetGroupAttributesInput) GoString 

func (s DescribeTargetGroupAttributesInput) GoString() string

GoString returns the string representation

func (DescribeTargetGroupAttributesInput) String 

func (s DescribeTargetGroupAttributesInput) String() string

String returns the string representation

func (*DescribeTargetGroupAttributesInput) Validate 

func (s *DescribeTargetGroupAttributesInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DescribeTargetGroupAttributesOutput 

type DescribeTargetGroupAttributesOutput struct {

	// Information about the target group attributes
	Attributes []*TargetGroupAttribute `type:"list"`
	// contains filtered or unexported fields
}

Contains the output of DescribeTargetGroupAttributes.

func (DescribeTargetGroupAttributesOutput) GoString 

func (s DescribeTargetGroupAttributesOutput) GoString() string

GoString returns the string representation

func (DescribeTargetGroupAttributesOutput) String 

func (s DescribeTargetGroupAttributesOutput) String() string

String returns the string representation

type DescribeTargetGroupsInput 

type DescribeTargetGroupsInput struct {

	// The Amazon Resource Name (ARN) of the load balancer.
	LoadBalancerArn *string `type:"string"`

	// The marker for the next set of results. (You received this marker from a
	// previous call.)
	Marker *string `type:"string"`

	// The names of the target groups.
	Names []*string `type:"list"`

	// The maximum number of results to return with this call.
	PageSize *int64 `min:"1" type:"integer"`

	// The Amazon Resource Names (ARN) of the target groups.
	TargetGroupArns []*string `type:"list"`
	// contains filtered or unexported fields
}

Contains the parameters for DescribeTargetGroups.

func (DescribeTargetGroupsInput) GoString 

func (s DescribeTargetGroupsInput) GoString() string

GoString returns the string representation

func (DescribeTargetGroupsInput) String 

func (s DescribeTargetGroupsInput) String() string

String returns the string representation

func (*DescribeTargetGroupsInput) Validate 

func (s *DescribeTargetGroupsInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DescribeTargetGroupsOutput 

type DescribeTargetGroupsOutput struct {

	// The marker to use when requesting the next set of results. If there are no
	// additional results, the string is empty.
	NextMarker *string `type:"string"`

	// Information about the target groups.
	TargetGroups []*TargetGroup `type:"list"`
	// contains filtered or unexported fields
}

Contains the output of DescribeTargetGroups.

func (DescribeTargetGroupsOutput) GoString 

func (s DescribeTargetGroupsOutput) GoString() string

GoString returns the string representation

func (DescribeTargetGroupsOutput) String 

func (s DescribeTargetGroupsOutput) String() string

String returns the string representation

type DescribeTargetHealthInput 

type DescribeTargetHealthInput struct {

	// The Amazon Resource Name (ARN) of the target group.
	//
	// TargetGroupArn is a required field
	TargetGroupArn *string `type:"string" required:"true"`

	// The targets.
	Targets []*TargetDescription `type:"list"`
	// contains filtered or unexported fields
}

Contains the parameters for DescribeTargetHealth.

func (DescribeTargetHealthInput) GoString 

func (s DescribeTargetHealthInput) GoString() string

GoString returns the string representation

func (DescribeTargetHealthInput) String 

func (s DescribeTargetHealthInput) String() string

String returns the string representation

func (*DescribeTargetHealthInput) Validate 

func (s *DescribeTargetHealthInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DescribeTargetHealthOutput 

type DescribeTargetHealthOutput struct {

	// Information about the health of the targets.
	TargetHealthDescriptions []*TargetHealthDescription `type:"list"`
	// contains filtered or unexported fields
}

Contains the output of DescribeTargetHealth.

func (DescribeTargetHealthOutput) GoString 

func (s DescribeTargetHealthOutput) GoString() string

GoString returns the string representation

func (DescribeTargetHealthOutput) String 

func (s DescribeTargetHealthOutput) String() string

String returns the string representation

type ELBV2 

type ELBV2 struct {
	*client.Client
}

A load balancer distributes incoming traffic across targets, such as your EC2 instances. This enables you to increase the availability of your application. The load balancer also monitors the health of its registered targets and ensures that it routes traffic only to healthy targets. You configure your load balancer to accept incoming traffic by specifying one or more listeners, which are configured with a protocol and port number for connections from clients to the load balancer. You configure a target group with a protocol and port number for connections from the load balancer to the targets, and with health check settings to be used when checking the health status of the targets.

Elastic Load Balancing supports two types of load balancers: Classic load balancers and Application load balancers (new). A Classic load balancer makes routing and load balancing decisions either at the transport layer (TCP/SSL) or the application layer (HTTP/HTTPS), and supports either EC2-Classic or a VPC. An Application load balancer makes routing and load balancing decisions at the application layer (HTTP/HTTPS), supports path-based routing, and can route requests to one or more ports on each EC2 instance or container instance in your virtual private cloud (VPC). For more information, see the Elastic Load Balancing User Guide (http://docs.aws.amazon.com/elasticloadbalancing/latest/userguide/).

This reference covers the 2015-12-01 API, which supports Application load balancers. The 2012-06-01 API supports Classic load balancers.

To get started with an Application load balancer, complete the following tasks: 

Create a load balancer using CreateLoadBalancer.

Create a target group using CreateTargetGroup.

Register targets for the target group using RegisterTargets.

Create one or more listeners for your load balancer using CreateListener.

(Optional) Create one or more rules for content routing based on URL using

CreateRule. 

To delete an Application load balancer and its related resources, complete

the following tasks: 

Delete the load balancer using DeleteLoadBalancer.

Delete the target group using DeleteTargetGroup.

All Elastic Load Balancing operations are idempotent, which means that

they complete at most one time. If you repeat an operation, it succeeds. The service client's operations are safe to be used concurrently. It is not safe to mutate any of the client's properties though.

func New 

func New(p client.ConfigProvider, cfgs ...*aws.Config) *ELBV2

New creates a new instance of the ELBV2 client with a session. If additional configuration is needed for the client instance use the optional aws.Config parameter to add your extra config.

Example: 

// Create a ELBV2 client from just a session.
svc := elbv2.New(mySession)

// Create a ELBV2 client with additional configuration
svc := elbv2.New(mySession, aws.NewConfig().WithRegion("us-west-2"))

func (*ELBV2) AddTags 

func (c *ELBV2) AddTags(input *AddTagsInput) (*AddTagsOutput, error)

Adds the specified tags to the specified resource. You can tag your Application load balancers and your target groups.

Each tag consists of a key and an optional value. If a resource already has a tag with the same key, AddTags updates its value.

To list the current tags for your resources, use DescribeTags. To remove tags from your resources, use RemoveTags.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/elbv2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := elbv2.New(sess)

	params := &elbv2.AddTagsInput{
		ResourceArns: []*string{ // Required
			aws.String("ResourceArn"), // Required
			// More values...
		},
		Tags: []*elbv2.Tag{ // Required
			{ // Required
				Key:   aws.String("TagKey"), // Required
				Value: aws.String("TagValue"),
			},
			// More values...
		},
	}
	resp, err := svc.AddTags(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*ELBV2) AddTagsRequest 

func (c *ELBV2) AddTagsRequest(input *AddTagsInput) (req *request.Request, output *AddTagsOutput)

AddTagsRequest generates a "aws/request.Request" representing the client's request for the AddTags operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the AddTags method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the AddTagsRequest method.
req, resp := client.AddTagsRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*ELBV2) CreateListener 

func (c *ELBV2) CreateListener(input *CreateListenerInput) (*CreateListenerOutput, error)

Creates a listener for the specified Application load balancer.

To update a listener, use ModifyListener. When you are finished with a listener, you can delete it using DeleteListener. If you are finished with both the listener and the load balancer, you can delete them both using DeleteLoadBalancer.

For more information, see Listeners for Your Application Load Balancers (http://docs.aws.amazon.com/elasticloadbalancing/latest/application/load-balancer-listeners.html) in the Application Load Balancers Guide.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/elbv2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := elbv2.New(sess)

	params := &elbv2.CreateListenerInput{
		DefaultActions: []*elbv2.Action{ // Required
			{ // Required
				TargetGroupArn: aws.String("TargetGroupArn"), // Required
				Type:           aws.String("ActionTypeEnum"), // Required
			},
			// More values...
		},
		LoadBalancerArn: aws.String("LoadBalancerArn"), // Required
		Port:            aws.Int64(1),                  // Required
		Protocol:        aws.String("ProtocolEnum"),    // Required
		Certificates: []*elbv2.Certificate{
			{ // Required
				CertificateArn: aws.String("CertificateArn"),
			},
			// More values...
		},
		SslPolicy: aws.String("SslPolicyName"),
	}
	resp, err := svc.CreateListener(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*ELBV2) CreateListenerRequest 

func (c *ELBV2) CreateListenerRequest(input *CreateListenerInput) (req *request.Request, output *CreateListenerOutput)

CreateListenerRequest generates a "aws/request.Request" representing the client's request for the CreateListener operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the CreateListener method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the CreateListenerRequest method.
req, resp := client.CreateListenerRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*ELBV2) CreateLoadBalancer 

func (c *ELBV2) CreateLoadBalancer(input *CreateLoadBalancerInput) (*CreateLoadBalancerOutput, error)

Creates an Application load balancer.

To create listeners for your load balancer, use CreateListener. You can add security groups, subnets, and tags when you create your load balancer, or you can add them later using SetSecurityGroups, SetSubnets, and AddTags.

To describe your current load balancers, see DescribeLoadBalancers. When you are finished with a load balancer, you can delete it using DeleteLoadBalancer.

You can create up to 20 load balancers per region per account. You can request an increase for the number of load balancers for your account. For more information, see Limits for Your Application Load Balancer (http://docs.aws.amazon.com/elasticloadbalancing/latest/application/load-balancer-limits.html) in the Application Load Balancers Guide.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/elbv2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := elbv2.New(sess)

	params := &elbv2.CreateLoadBalancerInput{
		Name: aws.String("LoadBalancerName"), // Required
		Subnets: []*string{ // Required
			aws.String("SubnetId"), // Required
			// More values...
		},
		Scheme: aws.String("LoadBalancerSchemeEnum"),
		SecurityGroups: []*string{
			aws.String("SecurityGroupId"), // Required
			// More values...
		},
		Tags: []*elbv2.Tag{
			{ // Required
				Key:   aws.String("TagKey"), // Required
				Value: aws.String("TagValue"),
			},
			// More values...
		},
	}
	resp, err := svc.CreateLoadBalancer(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*ELBV2) CreateLoadBalancerRequest 

func (c *ELBV2) CreateLoadBalancerRequest(input *CreateLoadBalancerInput) (req *request.Request, output *CreateLoadBalancerOutput)

CreateLoadBalancerRequest generates a "aws/request.Request" representing the client's request for the CreateLoadBalancer operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the CreateLoadBalancer method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the CreateLoadBalancerRequest method.
req, resp := client.CreateLoadBalancerRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*ELBV2) CreateRule 

func (c *ELBV2) CreateRule(input *CreateRuleInput) (*CreateRuleOutput, error)

Creates a rule for the specified listener.

A rule consists conditions and actions. Rules are evaluated in priority order, from the lowest value to the highest value. When the conditions for a rule are met, the specified actions are taken. If no rule's conditions are met, the default actions for the listener are taken.

To view your current rules, use DescribeRules. To update a rule, use ModifyRule. To set the priorities of your rules, use SetRulePriorities. To delete a rule, use DeleteRule.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/elbv2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := elbv2.New(sess)

	params := &elbv2.CreateRuleInput{
		Actions: []*elbv2.Action{ // Required
			{ // Required
				TargetGroupArn: aws.String("TargetGroupArn"), // Required
				Type:           aws.String("ActionTypeEnum"), // Required
			},
			// More values...
		},
		Conditions: []*elbv2.RuleCondition{ // Required
			{ // Required
				Field: aws.String("ConditionFieldName"),
				Values: []*string{
					aws.String("StringValue"), // Required
					// More values...
				},
			},
			// More values...
		},
		ListenerArn: aws.String("ListenerArn"), // Required
		Priority:    aws.Int64(1),              // Required
	}
	resp, err := svc.CreateRule(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*ELBV2) CreateRuleRequest 

func (c *ELBV2) CreateRuleRequest(input *CreateRuleInput) (req *request.Request, output *CreateRuleOutput)

CreateRuleRequest generates a "aws/request.Request" representing the client's request for the CreateRule operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the CreateRule method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the CreateRuleRequest method.
req, resp := client.CreateRuleRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*ELBV2) CreateTargetGroup 

func (c *ELBV2) CreateTargetGroup(input *CreateTargetGroupInput) (*CreateTargetGroupOutput, error)

Creates a target group.

To register targets with the target group, use RegisterTargets. To update the health check settings for the target group, use ModifyTargetGroup. To monitor the health of targets in the target group, use DescribeTargetHealth.

To route traffic to the targets in a target group, specify the target group in an action using CreateListener or CreateRule.

To delete a target group, use DeleteTargetGroup.

For more information, see Target Groups for Your Application Load Balancers (http://docs.aws.amazon.com/elasticloadbalancing/latest/application/load-balancer-target-groups.html) in the Application Load Balancers Guide.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/elbv2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := elbv2.New(sess)

	params := &elbv2.CreateTargetGroupInput{
		Name:                       aws.String("TargetGroupName"), // Required
		Port:                       aws.Int64(1),                  // Required
		Protocol:                   aws.String("ProtocolEnum"),    // Required
		VpcId:                      aws.String("VpcId"),           // Required
		HealthCheckIntervalSeconds: aws.Int64(1),
		HealthCheckPath:            aws.String("Path"),
		HealthCheckPort:            aws.String("HealthCheckPort"),
		HealthCheckProtocol:        aws.String("ProtocolEnum"),
		HealthCheckTimeoutSeconds:  aws.Int64(1),
		HealthyThresholdCount:      aws.Int64(1),
		Matcher: &elbv2.Matcher{
			HttpCode: aws.String("HttpCode"), // Required
		},
		UnhealthyThresholdCount: aws.Int64(1),
	}
	resp, err := svc.CreateTargetGroup(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*ELBV2) CreateTargetGroupRequest 

func (c *ELBV2) CreateTargetGroupRequest(input *CreateTargetGroupInput) (req *request.Request, output *CreateTargetGroupOutput)

CreateTargetGroupRequest generates a "aws/request.Request" representing the client's request for the CreateTargetGroup operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the CreateTargetGroup method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the CreateTargetGroupRequest method.
req, resp := client.CreateTargetGroupRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*ELBV2) DeleteListener 

func (c *ELBV2) DeleteListener(input *DeleteListenerInput) (*DeleteListenerOutput, error)

Deletes the specified listener.

Alternatively, your listener is deleted when you delete the load balancer it is attached to using DeleteLoadBalancer.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/elbv2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := elbv2.New(sess)

	params := &elbv2.DeleteListenerInput{
		ListenerArn: aws.String("ListenerArn"), // Required
	}
	resp, err := svc.DeleteListener(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*ELBV2) DeleteListenerRequest 

func (c *ELBV2) DeleteListenerRequest(input *DeleteListenerInput) (req *request.Request, output *DeleteListenerOutput)

DeleteListenerRequest generates a "aws/request.Request" representing the client's request for the DeleteListener operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DeleteListener method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the DeleteListenerRequest method.
req, resp := client.DeleteListenerRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*ELBV2) DeleteLoadBalancer 

func (c *ELBV2) DeleteLoadBalancer(input *DeleteLoadBalancerInput) (*DeleteLoadBalancerOutput, error)

Deletes the specified load balancer and its attached listeners.

You can't delete a load balancer if deletion protection is enabled. If the load balancer does not exist or has already been deleted, the call succeeds.

Deleting a load balancer does not affect its registered targets. For example, your EC2 instances continue to run and are still registered to their target groups. If you no longer need these EC2 instances, you can stop or terminate them.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/elbv2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := elbv2.New(sess)

	params := &elbv2.DeleteLoadBalancerInput{
		LoadBalancerArn: aws.String("LoadBalancerArn"), // Required
	}
	resp, err := svc.DeleteLoadBalancer(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*ELBV2) DeleteLoadBalancerRequest 

func (c *ELBV2) DeleteLoadBalancerRequest(input *DeleteLoadBalancerInput) (req *request.Request, output *DeleteLoadBalancerOutput)

DeleteLoadBalancerRequest generates a "aws/request.Request" representing the client's request for the DeleteLoadBalancer operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DeleteLoadBalancer method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the DeleteLoadBalancerRequest method.
req, resp := client.DeleteLoadBalancerRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*ELBV2) DeleteRule 

func (c *ELBV2) DeleteRule(input *DeleteRuleInput) (*DeleteRuleOutput, error)

Deletes the specified rule.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/elbv2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := elbv2.New(sess)

	params := &elbv2.DeleteRuleInput{
		RuleArn: aws.String("RuleArn"), // Required
	}
	resp, err := svc.DeleteRule(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*ELBV2) DeleteRuleRequest 

func (c *ELBV2) DeleteRuleRequest(input *DeleteRuleInput) (req *request.Request, output *DeleteRuleOutput)

DeleteRuleRequest generates a "aws/request.Request" representing the client's request for the DeleteRule operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DeleteRule method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the DeleteRuleRequest method.
req, resp := client.DeleteRuleRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*ELBV2) DeleteTargetGroup 

func (c *ELBV2) DeleteTargetGroup(input *DeleteTargetGroupInput) (*DeleteTargetGroupOutput, error)

Deletes the specified target group.

You can delete a target group if it is not referenced by any actions. Deleting a target group also deletes any associated health checks.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/elbv2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := elbv2.New(sess)

	params := &elbv2.DeleteTargetGroupInput{
		TargetGroupArn: aws.String("TargetGroupArn"), // Required
	}
	resp, err := svc.DeleteTargetGroup(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*ELBV2) DeleteTargetGroupRequest 

func (c *ELBV2) DeleteTargetGroupRequest(input *DeleteTargetGroupInput) (req *request.Request, output *DeleteTargetGroupOutput)

DeleteTargetGroupRequest generates a "aws/request.Request" representing the client's request for the DeleteTargetGroup operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DeleteTargetGroup method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the DeleteTargetGroupRequest method.
req, resp := client.DeleteTargetGroupRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*ELBV2) DeregisterTargets 

func (c *ELBV2) DeregisterTargets(input *DeregisterTargetsInput) (*DeregisterTargetsOutput, error)

Deregisters the specified targets from the specified target group. After the targets are deregistered, they no longer receive traffic from the load balancer.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/elbv2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := elbv2.New(sess)

	params := &elbv2.DeregisterTargetsInput{
		TargetGroupArn: aws.String("TargetGroupArn"), // Required
		Targets: []*elbv2.TargetDescription{ // Required
			{ // Required
				Id:   aws.String("TargetId"), // Required
				Port: aws.Int64(1),
			},
			// More values...
		},
	}
	resp, err := svc.DeregisterTargets(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*ELBV2) DeregisterTargetsRequest 

func (c *ELBV2) DeregisterTargetsRequest(input *DeregisterTargetsInput) (req *request.Request, output *DeregisterTargetsOutput)

DeregisterTargetsRequest generates a "aws/request.Request" representing the client's request for the DeregisterTargets operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DeregisterTargets method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the DeregisterTargetsRequest method.
req, resp := client.DeregisterTargetsRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*ELBV2) DescribeListeners 

func (c *ELBV2) DescribeListeners(input *DescribeListenersInput) (*DescribeListenersOutput, error)

Describes the specified listeners or the listeners for the specified load balancer. You must specify either a load balancer or one or more listeners.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/elbv2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := elbv2.New(sess)

	params := &elbv2.DescribeListenersInput{
		ListenerArns: []*string{
			aws.String("ListenerArn"), // Required
			// More values...
		},
		LoadBalancerArn: aws.String("LoadBalancerArn"),
		Marker:          aws.String("Marker"),
		PageSize:        aws.Int64(1),
	}
	resp, err := svc.DescribeListeners(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*ELBV2) DescribeListenersPages 

func (c *ELBV2) DescribeListenersPages(input *DescribeListenersInput, fn func(p *DescribeListenersOutput, lastPage bool) (shouldContinue bool)) error

DescribeListenersPages iterates over the pages of a DescribeListeners operation, calling the "fn" function with the response data for each page. To stop iterating, return false from the fn function.

See DescribeListeners method for more information on how to use this operation.

Note: This operation can generate multiple requests to a service. 

// Example iterating over at most 3 pages of a DescribeListeners operation.
pageNum := 0
err := client.DescribeListenersPages(params,
    func(page *DescribeListenersOutput, lastPage bool) bool {
        pageNum++
        fmt.Println(page)
        return pageNum <= 3
    })

func (*ELBV2) DescribeListenersRequest 

func (c *ELBV2) DescribeListenersRequest(input *DescribeListenersInput) (req *request.Request, output *DescribeListenersOutput)

DescribeListenersRequest generates a "aws/request.Request" representing the client's request for the DescribeListeners operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DescribeListeners method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the DescribeListenersRequest method.
req, resp := client.DescribeListenersRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*ELBV2) DescribeLoadBalancerAttributes 

func (c *ELBV2) DescribeLoadBalancerAttributes(input *DescribeLoadBalancerAttributesInput) (*DescribeLoadBalancerAttributesOutput, error)

Describes the attributes for the specified load balancer.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/elbv2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := elbv2.New(sess)

	params := &elbv2.DescribeLoadBalancerAttributesInput{
		LoadBalancerArn: aws.String("LoadBalancerArn"), // Required
	}
	resp, err := svc.DescribeLoadBalancerAttributes(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*ELBV2) DescribeLoadBalancerAttributesRequest 

func (c *ELBV2) DescribeLoadBalancerAttributesRequest(input *DescribeLoadBalancerAttributesInput) (req *request.Request, output *DescribeLoadBalancerAttributesOutput)

DescribeLoadBalancerAttributesRequest generates a "aws/request.Request" representing the client's request for the DescribeLoadBalancerAttributes operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DescribeLoadBalancerAttributes method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the DescribeLoadBalancerAttributesRequest method.
req, resp := client.DescribeLoadBalancerAttributesRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*ELBV2) DescribeLoadBalancers 

func (c *ELBV2) DescribeLoadBalancers(input *DescribeLoadBalancersInput) (*DescribeLoadBalancersOutput, error)

Describes the specified Application load balancers or all of your Application load balancers.

To describe the listeners for a load balancer, use DescribeListeners. To describe the attributes for a load balancer, use DescribeLoadBalancerAttributes.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/elbv2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := elbv2.New(sess)

	params := &elbv2.DescribeLoadBalancersInput{
		LoadBalancerArns: []*string{
			aws.String("LoadBalancerArn"), // Required
			// More values...
		},
		Marker: aws.String("Marker"),
		Names: []*string{
			aws.String("LoadBalancerName"), // Required
			// More values...
		},
		PageSize: aws.Int64(1),
	}
	resp, err := svc.DescribeLoadBalancers(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*ELBV2) DescribeLoadBalancersPages 

func (c *ELBV2) DescribeLoadBalancersPages(input *DescribeLoadBalancersInput, fn func(p *DescribeLoadBalancersOutput, lastPage bool) (shouldContinue bool)) error

DescribeLoadBalancersPages iterates over the pages of a DescribeLoadBalancers operation, calling the "fn" function with the response data for each page. To stop iterating, return false from the fn function.

See DescribeLoadBalancers method for more information on how to use this operation.

Note: This operation can generate multiple requests to a service. 

// Example iterating over at most 3 pages of a DescribeLoadBalancers operation.
pageNum := 0
err := client.DescribeLoadBalancersPages(params,
    func(page *DescribeLoadBalancersOutput, lastPage bool) bool {
        pageNum++
        fmt.Println(page)
        return pageNum <= 3
    })

func (*ELBV2) DescribeLoadBalancersRequest 

func (c *ELBV2) DescribeLoadBalancersRequest(input *DescribeLoadBalancersInput) (req *request.Request, output *DescribeLoadBalancersOutput)

DescribeLoadBalancersRequest generates a "aws/request.Request" representing the client's request for the DescribeLoadBalancers operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DescribeLoadBalancers method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the DescribeLoadBalancersRequest method.
req, resp := client.DescribeLoadBalancersRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*ELBV2) DescribeRules 

func (c *ELBV2) DescribeRules(input *DescribeRulesInput) (*DescribeRulesOutput, error)

Describes the specified rules or the rules for the specified listener. You must specify either a listener or one or more rules.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/elbv2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := elbv2.New(sess)

	params := &elbv2.DescribeRulesInput{
		ListenerArn: aws.String("ListenerArn"),
		RuleArns: []*string{
			aws.String("RuleArn"), // Required
			// More values...
		},
	}
	resp, err := svc.DescribeRules(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*ELBV2) DescribeRulesRequest 

func (c *ELBV2) DescribeRulesRequest(input *DescribeRulesInput) (req *request.Request, output *DescribeRulesOutput)

DescribeRulesRequest generates a "aws/request.Request" representing the client's request for the DescribeRules operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DescribeRules method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the DescribeRulesRequest method.
req, resp := client.DescribeRulesRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*ELBV2) DescribeSSLPolicies 

func (c *ELBV2) DescribeSSLPolicies(input *DescribeSSLPoliciesInput) (*DescribeSSLPoliciesOutput, error)

Describes the specified policies or all policies used for SSL negotiation.

Note that the only supported policy at this time is ELBSecurityPolicy-2015-05.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/elbv2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := elbv2.New(sess)

	params := &elbv2.DescribeSSLPoliciesInput{
		Marker: aws.String("Marker"),
		Names: []*string{
			aws.String("SslPolicyName"), // Required
			// More values...
		},
		PageSize: aws.Int64(1),
	}
	resp, err := svc.DescribeSSLPolicies(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*ELBV2) DescribeSSLPoliciesRequest 

func (c *ELBV2) DescribeSSLPoliciesRequest(input *DescribeSSLPoliciesInput) (req *request.Request, output *DescribeSSLPoliciesOutput)

DescribeSSLPoliciesRequest generates a "aws/request.Request" representing the client's request for the DescribeSSLPolicies operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DescribeSSLPolicies method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the DescribeSSLPoliciesRequest method.
req, resp := client.DescribeSSLPoliciesRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*ELBV2) DescribeTags 

func (c *ELBV2) DescribeTags(input *DescribeTagsInput) (*DescribeTagsOutput, error)

Describes the tags for the specified resources.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/elbv2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := elbv2.New(sess)

	params := &elbv2.DescribeTagsInput{
		ResourceArns: []*string{ // Required
			aws.String("ResourceArn"), // Required
			// More values...
		},
	}
	resp, err := svc.DescribeTags(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*ELBV2) DescribeTagsRequest 

func (c *ELBV2) DescribeTagsRequest(input *DescribeTagsInput) (req *request.Request, output *DescribeTagsOutput)

DescribeTagsRequest generates a "aws/request.Request" representing the client's request for the DescribeTags operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DescribeTags method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the DescribeTagsRequest method.
req, resp := client.DescribeTagsRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*ELBV2) DescribeTargetGroupAttributes 

func (c *ELBV2) DescribeTargetGroupAttributes(input *DescribeTargetGroupAttributesInput) (*DescribeTargetGroupAttributesOutput, error)

Describes the attributes for the specified target group.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/elbv2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := elbv2.New(sess)

	params := &elbv2.DescribeTargetGroupAttributesInput{
		TargetGroupArn: aws.String("TargetGroupArn"), // Required
	}
	resp, err := svc.DescribeTargetGroupAttributes(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*ELBV2) DescribeTargetGroupAttributesRequest 

func (c *ELBV2) DescribeTargetGroupAttributesRequest(input *DescribeTargetGroupAttributesInput) (req *request.Request, output *DescribeTargetGroupAttributesOutput)

DescribeTargetGroupAttributesRequest generates a "aws/request.Request" representing the client's request for the DescribeTargetGroupAttributes operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DescribeTargetGroupAttributes method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the DescribeTargetGroupAttributesRequest method.
req, resp := client.DescribeTargetGroupAttributesRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*ELBV2) DescribeTargetGroups 

func (c *ELBV2) DescribeTargetGroups(input *DescribeTargetGroupsInput) (*DescribeTargetGroupsOutput, error)

Describes the specified target groups or all of your target groups. By default, all target groups are described. Alternatively, you can specify one of the following to filter the results: the ARN of the load balancer, the names of one or more target groups, or the ARNs of one or more target groups.

To describe the targets for a target group, use DescribeTargetHealth. To describe the attributes of a target group, use DescribeTargetGroupAttributes.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/elbv2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := elbv2.New(sess)

	params := &elbv2.DescribeTargetGroupsInput{
		LoadBalancerArn: aws.String("LoadBalancerArn"),
		Marker:          aws.String("Marker"),
		Names: []*string{
			aws.String("TargetGroupName"), // Required
			// More values...
		},
		PageSize: aws.Int64(1),
		TargetGroupArns: []*string{
			aws.String("TargetGroupArn"), // Required
			// More values...
		},
	}
	resp, err := svc.DescribeTargetGroups(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*ELBV2) DescribeTargetGroupsPages 

func (c *ELBV2) DescribeTargetGroupsPages(input *DescribeTargetGroupsInput, fn func(p *DescribeTargetGroupsOutput, lastPage bool) (shouldContinue bool)) error

DescribeTargetGroupsPages iterates over the pages of a DescribeTargetGroups operation, calling the "fn" function with the response data for each page. To stop iterating, return false from the fn function.

See DescribeTargetGroups method for more information on how to use this operation.

Note: This operation can generate multiple requests to a service. 

// Example iterating over at most 3 pages of a DescribeTargetGroups operation.
pageNum := 0
err := client.DescribeTargetGroupsPages(params,
    func(page *DescribeTargetGroupsOutput, lastPage bool) bool {
        pageNum++
        fmt.Println(page)
        return pageNum <= 3
    })

func (*ELBV2) DescribeTargetGroupsRequest 

func (c *ELBV2) DescribeTargetGroupsRequest(input *DescribeTargetGroupsInput) (req *request.Request, output *DescribeTargetGroupsOutput)

DescribeTargetGroupsRequest generates a "aws/request.Request" representing the client's request for the DescribeTargetGroups operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DescribeTargetGroups method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the DescribeTargetGroupsRequest method.
req, resp := client.DescribeTargetGroupsRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*ELBV2) DescribeTargetHealth 

func (c *ELBV2) DescribeTargetHealth(input *DescribeTargetHealthInput) (*DescribeTargetHealthOutput, error)

Describes the health of the specified targets or all of your targets.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/elbv2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := elbv2.New(sess)

	params := &elbv2.DescribeTargetHealthInput{
		TargetGroupArn: aws.String("TargetGroupArn"), // Required
		Targets: []*elbv2.TargetDescription{
			{ // Required
				Id:   aws.String("TargetId"), // Required
				Port: aws.Int64(1),
			},
			// More values...
		},
	}
	resp, err := svc.DescribeTargetHealth(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*ELBV2) DescribeTargetHealthRequest 

func (c *ELBV2) DescribeTargetHealthRequest(input *DescribeTargetHealthInput) (req *request.Request, output *DescribeTargetHealthOutput)

DescribeTargetHealthRequest generates a "aws/request.Request" representing the client's request for the DescribeTargetHealth operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DescribeTargetHealth method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the DescribeTargetHealthRequest method.
req, resp := client.DescribeTargetHealthRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*ELBV2) ModifyListener 

func (c *ELBV2) ModifyListener(input *ModifyListenerInput) (*ModifyListenerOutput, error)

Modifies the specified properties of the specified listener.

Any properties that you do not specify retain their current values. However, changing the protocol from HTTPS to HTTP removes the security policy and SSL certificate properties. If you change the protocol from HTTP to HTTPS, you must add the security policy.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/elbv2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := elbv2.New(sess)

	params := &elbv2.ModifyListenerInput{
		ListenerArn: aws.String("ListenerArn"), // Required
		Certificates: []*elbv2.Certificate{
			{ // Required
				CertificateArn: aws.String("CertificateArn"),
			},
			// More values...
		},
		DefaultActions: []*elbv2.Action{
			{ // Required
				TargetGroupArn: aws.String("TargetGroupArn"), // Required
				Type:           aws.String("ActionTypeEnum"), // Required
			},
			// More values...
		},
		Port:      aws.Int64(1),
		Protocol:  aws.String("ProtocolEnum"),
		SslPolicy: aws.String("SslPolicyName"),
	}
	resp, err := svc.ModifyListener(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*ELBV2) ModifyListenerRequest 

func (c *ELBV2) ModifyListenerRequest(input *ModifyListenerInput) (req *request.Request, output *ModifyListenerOutput)

ModifyListenerRequest generates a "aws/request.Request" representing the client's request for the ModifyListener operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the ModifyListener method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the ModifyListenerRequest method.
req, resp := client.ModifyListenerRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*ELBV2) ModifyLoadBalancerAttributes 

func (c *ELBV2) ModifyLoadBalancerAttributes(input *ModifyLoadBalancerAttributesInput) (*ModifyLoadBalancerAttributesOutput, error)

Modifies the specified attributes of the specified load balancer.

If any of the specified attributes can't be modified as requested, the call fails. Any existing attributes that you do not modify retain their current values.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/elbv2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := elbv2.New(sess)

	params := &elbv2.ModifyLoadBalancerAttributesInput{
		Attributes: []*elbv2.LoadBalancerAttribute{ // Required
			{ // Required
				Key:   aws.String("LoadBalancerAttributeKey"),
				Value: aws.String("LoadBalancerAttributeValue"),
			},
			// More values...
		},
		LoadBalancerArn: aws.String("LoadBalancerArn"), // Required
	}
	resp, err := svc.ModifyLoadBalancerAttributes(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*ELBV2) ModifyLoadBalancerAttributesRequest 

func (c *ELBV2) ModifyLoadBalancerAttributesRequest(input *ModifyLoadBalancerAttributesInput) (req *request.Request, output *ModifyLoadBalancerAttributesOutput)

ModifyLoadBalancerAttributesRequest generates a "aws/request.Request" representing the client's request for the ModifyLoadBalancerAttributes operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the ModifyLoadBalancerAttributes method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the ModifyLoadBalancerAttributesRequest method.
req, resp := client.ModifyLoadBalancerAttributesRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*ELBV2) ModifyRule 

func (c *ELBV2) ModifyRule(input *ModifyRuleInput) (*ModifyRuleOutput, error)

Modifies the specified rule.

Any existing properties that you do not modify retain their current values.

To modify the default action, use ModifyListener.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/elbv2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := elbv2.New(sess)

	params := &elbv2.ModifyRuleInput{
		RuleArn: aws.String("RuleArn"), // Required
		Actions: []*elbv2.Action{
			{ // Required
				TargetGroupArn: aws.String("TargetGroupArn"), // Required
				Type:           aws.String("ActionTypeEnum"), // Required
			},
			// More values...
		},
		Conditions: []*elbv2.RuleCondition{
			{ // Required
				Field: aws.String("ConditionFieldName"),
				Values: []*string{
					aws.String("StringValue"), // Required
					// More values...
				},
			},
			// More values...
		},
	}
	resp, err := svc.ModifyRule(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*ELBV2) ModifyRuleRequest 

func (c *ELBV2) ModifyRuleRequest(input *ModifyRuleInput) (req *request.Request, output *ModifyRuleOutput)

ModifyRuleRequest generates a "aws/request.Request" representing the client's request for the ModifyRule operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the ModifyRule method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the ModifyRuleRequest method.
req, resp := client.ModifyRuleRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*ELBV2) ModifyTargetGroup 

func (c *ELBV2) ModifyTargetGroup(input *ModifyTargetGroupInput) (*ModifyTargetGroupOutput, error)

Modifies the health checks used when evaluating the health state of the targets in the specified target group.

To monitor the health of the targets, use DescribeTargetHealth.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/elbv2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := elbv2.New(sess)

	params := &elbv2.ModifyTargetGroupInput{
		TargetGroupArn:             aws.String("TargetGroupArn"), // Required
		HealthCheckIntervalSeconds: aws.Int64(1),
		HealthCheckPath:            aws.String("Path"),
		HealthCheckPort:            aws.String("HealthCheckPort"),
		HealthCheckProtocol:        aws.String("ProtocolEnum"),
		HealthCheckTimeoutSeconds:  aws.Int64(1),
		HealthyThresholdCount:      aws.Int64(1),
		Matcher: &elbv2.Matcher{
			HttpCode: aws.String("HttpCode"), // Required
		},
		UnhealthyThresholdCount: aws.Int64(1),
	}
	resp, err := svc.ModifyTargetGroup(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*ELBV2) ModifyTargetGroupAttributes 

func (c *ELBV2) ModifyTargetGroupAttributes(input *ModifyTargetGroupAttributesInput) (*ModifyTargetGroupAttributesOutput, error)

Modifies the specified attributes of the specified target group.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/elbv2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := elbv2.New(sess)

	params := &elbv2.ModifyTargetGroupAttributesInput{
		Attributes: []*elbv2.TargetGroupAttribute{ // Required
			{ // Required
				Key:   aws.String("TargetGroupAttributeKey"),
				Value: aws.String("TargetGroupAttributeValue"),
			},
			// More values...
		},
		TargetGroupArn: aws.String("TargetGroupArn"), // Required
	}
	resp, err := svc.ModifyTargetGroupAttributes(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*ELBV2) ModifyTargetGroupAttributesRequest 

func (c *ELBV2) ModifyTargetGroupAttributesRequest(input *ModifyTargetGroupAttributesInput) (req *request.Request, output *ModifyTargetGroupAttributesOutput)

ModifyTargetGroupAttributesRequest generates a "aws/request.Request" representing the client's request for the ModifyTargetGroupAttributes operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the ModifyTargetGroupAttributes method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the ModifyTargetGroupAttributesRequest method.
req, resp := client.ModifyTargetGroupAttributesRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*ELBV2) ModifyTargetGroupRequest 

func (c *ELBV2) ModifyTargetGroupRequest(input *ModifyTargetGroupInput) (req *request.Request, output *ModifyTargetGroupOutput)

ModifyTargetGroupRequest generates a "aws/request.Request" representing the client's request for the ModifyTargetGroup operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the ModifyTargetGroup method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the ModifyTargetGroupRequest method.
req, resp := client.ModifyTargetGroupRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*ELBV2) RegisterTargets 

func (c *ELBV2) RegisterTargets(input *RegisterTargetsInput) (*RegisterTargetsOutput, error)

Registers the specified targets with the specified target group.

The target must be in the virtual private cloud (VPC) that you specified for the target group.

To remove a target from a target group, use DeregisterTargets.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/elbv2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := elbv2.New(sess)

	params := &elbv2.RegisterTargetsInput{
		TargetGroupArn: aws.String("TargetGroupArn"), // Required
		Targets: []*elbv2.TargetDescription{ // Required
			{ // Required
				Id:   aws.String("TargetId"), // Required
				Port: aws.Int64(1),
			},
			// More values...
		},
	}
	resp, err := svc.RegisterTargets(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*ELBV2) RegisterTargetsRequest 

func (c *ELBV2) RegisterTargetsRequest(input *RegisterTargetsInput) (req *request.Request, output *RegisterTargetsOutput)

RegisterTargetsRequest generates a "aws/request.Request" representing the client's request for the RegisterTargets operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the RegisterTargets method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the RegisterTargetsRequest method.
req, resp := client.RegisterTargetsRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*ELBV2) RemoveTags 

func (c *ELBV2) RemoveTags(input *RemoveTagsInput) (*RemoveTagsOutput, error)

Removes the specified tags from the specified resource.

To list the current tags for your resources, use DescribeTags.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/elbv2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := elbv2.New(sess)

	params := &elbv2.RemoveTagsInput{
		ResourceArns: []*string{ // Required
			aws.String("ResourceArn"), // Required
			// More values...
		},
		TagKeys: []*string{ // Required
			aws.String("TagKey"), // Required
			// More values...
		},
	}
	resp, err := svc.RemoveTags(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*ELBV2) RemoveTagsRequest 

func (c *ELBV2) RemoveTagsRequest(input *RemoveTagsInput) (req *request.Request, output *RemoveTagsOutput)

RemoveTagsRequest generates a "aws/request.Request" representing the client's request for the RemoveTags operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the RemoveTags method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the RemoveTagsRequest method.
req, resp := client.RemoveTagsRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*ELBV2) SetRulePriorities 

func (c *ELBV2) SetRulePriorities(input *SetRulePrioritiesInput) (*SetRulePrioritiesOutput, error)

Sets the priorities of the specified rules.

You can reorder the rules as long as there are no priority conflicts in the new order. Any existing rules that you do not specify retain their current priority.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/elbv2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := elbv2.New(sess)

	params := &elbv2.SetRulePrioritiesInput{
		RulePriorities: []*elbv2.RulePriorityPair{ // Required
			{ // Required
				Priority: aws.Int64(1),
				RuleArn:  aws.String("RuleArn"),
			},
			// More values...
		},
	}
	resp, err := svc.SetRulePriorities(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*ELBV2) SetRulePrioritiesRequest 

func (c *ELBV2) SetRulePrioritiesRequest(input *SetRulePrioritiesInput) (req *request.Request, output *SetRulePrioritiesOutput)

SetRulePrioritiesRequest generates a "aws/request.Request" representing the client's request for the SetRulePriorities operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the SetRulePriorities method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the SetRulePrioritiesRequest method.
req, resp := client.SetRulePrioritiesRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*ELBV2) SetSecurityGroups 

func (c *ELBV2) SetSecurityGroups(input *SetSecurityGroupsInput) (*SetSecurityGroupsOutput, error)

Associates the specified security groups with the specified load balancer. The specified security groups override the previously associated security groups.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/elbv2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := elbv2.New(sess)

	params := &elbv2.SetSecurityGroupsInput{
		LoadBalancerArn: aws.String("LoadBalancerArn"), // Required
		SecurityGroups: []*string{ // Required
			aws.String("SecurityGroupId"), // Required
			// More values...
		},
	}
	resp, err := svc.SetSecurityGroups(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*ELBV2) SetSecurityGroupsRequest 

func (c *ELBV2) SetSecurityGroupsRequest(input *SetSecurityGroupsInput) (req *request.Request, output *SetSecurityGroupsOutput)

SetSecurityGroupsRequest generates a "aws/request.Request" representing the client's request for the SetSecurityGroups operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the SetSecurityGroups method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the SetSecurityGroupsRequest method.
req, resp := client.SetSecurityGroupsRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*ELBV2) SetSubnets 

func (c *ELBV2) SetSubnets(input *SetSubnetsInput) (*SetSubnetsOutput, error)

Enables the Availability Zone for the specified subnets for the specified load balancer. The specified subnets replace the previously enabled subnets.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/elbv2"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := elbv2.New(sess)

	params := &elbv2.SetSubnetsInput{
		LoadBalancerArn: aws.String("LoadBalancerArn"), // Required
		Subnets: []*string{ // Required
			aws.String("SubnetId"), // Required
			// More values...
		},
	}
	resp, err := svc.SetSubnets(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*ELBV2) SetSubnetsRequest 

func (c *ELBV2) SetSubnetsRequest(input *SetSubnetsInput) (req *request.Request, output *SetSubnetsOutput)

SetSubnetsRequest generates a "aws/request.Request" representing the client's request for the SetSubnets operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the SetSubnets method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request. 

// Example sending a request using the SetSubnetsRequest method.
req, resp := client.SetSubnetsRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

type Listener 

type Listener struct {

	// The SSL server certificate. You must provide a certificate if the protocol
	// is HTTPS.
	Certificates []*Certificate `type:"list"`

	// The default actions for the listener.
	DefaultActions []*Action `type:"list"`

	// The Amazon Resource Name (ARN) of the listener.
	ListenerArn *string `type:"string"`

	// The Amazon Resource Name (ARN) of the load balancer.
	LoadBalancerArn *string `type:"string"`

	// The port on which the load balancer is listening.
	Port *int64 `min:"1" type:"integer"`

	// The protocol for connections from clients to the load balancer.
	Protocol *string `type:"string" enum:"ProtocolEnum"`

	// The security policy that defines which ciphers and protocols are supported.
	// The default is the current predefined security policy.
	SslPolicy *string `type:"string"`
	// contains filtered or unexported fields
}

Information about a listener.

func (Listener) GoString 

func (s Listener) GoString() string

GoString returns the string representation

func (Listener) String 

func (s Listener) String() string

String returns the string representation

type LoadBalancer 

type LoadBalancer struct {

	// The Availability Zones for the load balancer.
	AvailabilityZones []*AvailabilityZone `type:"list"`

	// The ID of the Amazon Route 53 hosted zone associated with the load balancer.
	CanonicalHostedZoneId *string `type:"string"`

	// The date and time the load balancer was created.
	CreatedTime *time.Time `type:"timestamp" timestampFormat:"iso8601"`

	// The public DNS name of the load balancer.
	DNSName *string `type:"string"`

	// The Amazon Resource Name (ARN) of the load balancer.
	LoadBalancerArn *string `type:"string"`

	// The name of the load balancer.
	LoadBalancerName *string `type:"string"`

	// The nodes of an Internet-facing load balancer have public IP addresses. The
	// DNS name of an Internet-facing load balancer is publicly resolvable to the
	// public IP addresses of the nodes. Therefore, Internet-facing load balancers
	// can route requests from clients over the Internet.
	//
	// The nodes of an internal load balancer have only private IP addresses. The
	// DNS name of an internal load balancer is publicly resolvable to the private
	// IP addresses of the nodes. Therefore, internal load balancers can only route
	// requests from clients with access to the VPC for the load balancer.
	Scheme *string `type:"string" enum:"LoadBalancerSchemeEnum"`

	// The IDs of the security groups for the load balancer.
	SecurityGroups []*string `type:"list"`

	// The state of the load balancer.
	State *LoadBalancerState `type:"structure"`

	// The type of load balancer.
	Type *string `type:"string" enum:"LoadBalancerTypeEnum"`

	// The ID of the VPC for the load balancer.
	VpcId *string `type:"string"`
	// contains filtered or unexported fields
}

Information about a load balancer.

func (LoadBalancer) GoString 

func (s LoadBalancer) GoString() string

GoString returns the string representation

func (LoadBalancer) String 

func (s LoadBalancer) String() string

String returns the string representation

type LoadBalancerAttribute 

type LoadBalancerAttribute struct {

	// The name of the attribute.
	//
	//    access_logs.s3.enabled - Indicates whether access logs stored in Amazon
	// S3 are enabled.
	//
	//    access_logs.s3.bucket - The name of the S3 bucket for the access logs.
	// This attribute is required if access logs in Amazon S3 are enabled. The bucket
	// must exist in the same region as the load balancer and have a bucket policy
	// that grants Elastic Load Balancing permission to write to the bucket.
	//
	//    access_logs.s3.prefix - The prefix for the location in the S3 bucket.
	// If you don't specify a prefix, the access logs are stored in the root of
	// the bucket.
	//
	//    deletion_protection.enabled - Indicates whether deletion protection is
	// enabled.
	//
	//    idle_timeout.timeout_seconds - The idle timeout value, in seconds. The
	// valid range is 1-3600. The default is 60 seconds.
	Key *string `type:"string"`

	// The value of the attribute.
	Value *string `type:"string"`
	// contains filtered or unexported fields
}

Information about a load balancer attribute.

func (LoadBalancerAttribute) GoString 

func (s LoadBalancerAttribute) GoString() string

GoString returns the string representation

func (LoadBalancerAttribute) String 

func (s LoadBalancerAttribute) String() string

String returns the string representation

type LoadBalancerState 

type LoadBalancerState struct {

	// The state code. The initial state of the load balancer is provisioning. After
	// the load balancer is fully set up and ready to route traffic, its state is
	// active. If the load balancer could not be set up, its state is failed.
	Code *string `type:"string" enum:"LoadBalancerStateEnum"`

	// A description of the state.
	Reason *string `type:"string"`
	// contains filtered or unexported fields
}

Information about the state of the load balancer.

func (LoadBalancerState) GoString 

func (s LoadBalancerState) GoString() string

GoString returns the string representation

func (LoadBalancerState) String 

func (s LoadBalancerState) String() string

String returns the string representation

type Matcher 

type Matcher struct {

	// The HTTP codes. The default value is 200. You can specify multiple values
	// (for example, "200,202") or a range of values (for example, "200-299").
	//
	// HttpCode is a required field
	HttpCode *string `type:"string" required:"true"`
	// contains filtered or unexported fields
}

Information to use when checking for a successful response from a target.

func (Matcher) GoString 

func (s Matcher) GoString() string

GoString returns the string representation

func (Matcher) String 

func (s Matcher) String() string

String returns the string representation

func (*Matcher) Validate 

func (s *Matcher) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type ModifyListenerInput 

type ModifyListenerInput struct {

	// The SSL server certificate.
	Certificates []*Certificate `type:"list"`

	// The default actions.
	DefaultActions []*Action `type:"list"`

	// The Amazon Resource Name (ARN) of the listener.
	//
	// ListenerArn is a required field
	ListenerArn *string `type:"string" required:"true"`

	// The port for connections from clients to the load balancer.
	Port *int64 `min:"1" type:"integer"`

	// The protocol for connections from clients to the load balancer.
	Protocol *string `type:"string" enum:"ProtocolEnum"`

	// The security policy that defines which ciphers and protocols are supported.
	SslPolicy *string `type:"string"`
	// contains filtered or unexported fields
}

Contains the parameters for ModifyListener.

func (ModifyListenerInput) GoString 

func (s ModifyListenerInput) GoString() string

GoString returns the string representation

func (ModifyListenerInput) String 

func (s ModifyListenerInput) String() string

String returns the string representation

func (*ModifyListenerInput) Validate 

func (s *ModifyListenerInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type ModifyListenerOutput 

type ModifyListenerOutput struct {

	// Information about the modified listeners.
	Listeners []*Listener `type:"list"`
	// contains filtered or unexported fields
}

Contains the output of ModifyListener.

func (ModifyListenerOutput) GoString 

func (s ModifyListenerOutput) GoString() string

GoString returns the string representation

func (ModifyListenerOutput) String 

func (s ModifyListenerOutput) String() string

String returns the string representation

type ModifyLoadBalancerAttributesInput 

type ModifyLoadBalancerAttributesInput struct {

	// The load balancer attributes.
	//
	// Attributes is a required field
	Attributes []*LoadBalancerAttribute `type:"list" required:"true"`

	// The Amazon Resource Name (ARN) of the load balancer.
	//
	// LoadBalancerArn is a required field
	LoadBalancerArn *string `type:"string" required:"true"`
	// contains filtered or unexported fields
}

Contains the parameters for ModifyLoadBalancerAttributes.

func (ModifyLoadBalancerAttributesInput) GoString 

func (s ModifyLoadBalancerAttributesInput) GoString() string

GoString returns the string representation

func (ModifyLoadBalancerAttributesInput) String 

func (s ModifyLoadBalancerAttributesInput) String() string

String returns the string representation

func (*ModifyLoadBalancerAttributesInput) Validate 

func (s *ModifyLoadBalancerAttributesInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type ModifyLoadBalancerAttributesOutput 

type ModifyLoadBalancerAttributesOutput struct {

	// Information about the load balancer attributes.
	Attributes []*LoadBalancerAttribute `type:"list"`
	// contains filtered or unexported fields
}

Contains the output of ModifyLoadBalancerAttributes.

func (ModifyLoadBalancerAttributesOutput) GoString 

func (s ModifyLoadBalancerAttributesOutput) GoString() string

GoString returns the string representation

func (ModifyLoadBalancerAttributesOutput) String 

func (s ModifyLoadBalancerAttributesOutput) String() string

String returns the string representation

type ModifyRuleInput 

type ModifyRuleInput struct {

	// The actions.
	Actions []*Action `type:"list"`

	// The conditions.
	Conditions []*RuleCondition `type:"list"`

	// The Amazon Resource Name (ARN) of the rule.
	//
	// RuleArn is a required field
	RuleArn *string `type:"string" required:"true"`
	// contains filtered or unexported fields
}

Contains the parameters for ModifyRules.

func (ModifyRuleInput) GoString 

func (s ModifyRuleInput) GoString() string

GoString returns the string representation

func (ModifyRuleInput) String 

func (s ModifyRuleInput) String() string

String returns the string representation

func (*ModifyRuleInput) Validate 

func (s *ModifyRuleInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type ModifyRuleOutput 

type ModifyRuleOutput struct {

	// Information about the rule.
	Rules []*Rule `type:"list"`
	// contains filtered or unexported fields
}

Contains the output of ModifyRules.

func (ModifyRuleOutput) GoString 

func (s ModifyRuleOutput) GoString() string

GoString returns the string representation

func (ModifyRuleOutput) String 

func (s ModifyRuleOutput) String() string

String returns the string representation

type ModifyTargetGroupAttributesInput 

type ModifyTargetGroupAttributesInput struct {

	// The attributes.
	//
	// Attributes is a required field
	Attributes []*TargetGroupAttribute `type:"list" required:"true"`

	// The Amazon Resource Name (ARN) of the target group.
	//
	// TargetGroupArn is a required field
	TargetGroupArn *string `type:"string" required:"true"`
	// contains filtered or unexported fields
}

Contains the parameters for ModifyTargetGroupAttributes.

func (ModifyTargetGroupAttributesInput) GoString 

func (s ModifyTargetGroupAttributesInput) GoString() string

GoString returns the string representation

func (ModifyTargetGroupAttributesInput) String 

func (s ModifyTargetGroupAttributesInput) String() string

String returns the string representation

func (*ModifyTargetGroupAttributesInput) Validate 

func (s *ModifyTargetGroupAttributesInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type ModifyTargetGroupAttributesOutput 

type ModifyTargetGroupAttributesOutput struct {

	// Information about the attributes.
	Attributes []*TargetGroupAttribute `type:"list"`
	// contains filtered or unexported fields
}

Contains the output of ModifyTargetGroupAttributes.

func (ModifyTargetGroupAttributesOutput) GoString 

func (s ModifyTargetGroupAttributesOutput) GoString() string

GoString returns the string representation

func (ModifyTargetGroupAttributesOutput) String 

func (s ModifyTargetGroupAttributesOutput) String() string

String returns the string representation

type ModifyTargetGroupInput 

type ModifyTargetGroupInput struct {

	// The approximate amount of time, in seconds, between health checks of an individual
	// target.
	HealthCheckIntervalSeconds *int64 `min:"5" type:"integer"`

	// The ping path that is the destination for the health check request.
	HealthCheckPath *string `min:"1" type:"string"`

	// The port to use to connect with the target.
	HealthCheckPort *string `type:"string"`

	// The protocol to use to connect with the target.
	HealthCheckProtocol *string `type:"string" enum:"ProtocolEnum"`

	// The amount of time, in seconds, during which no response means a failed health
	// check.
	HealthCheckTimeoutSeconds *int64 `min:"2" type:"integer"`

	// The number of consecutive health checks successes required before considering
	// an unhealthy target healthy.
	HealthyThresholdCount *int64 `min:"2" type:"integer"`

	// The HTTP codes to use when checking for a successful response from a target.
	Matcher *Matcher `type:"structure"`

	// The Amazon Resource Name (ARN) of the target group.
	//
	// TargetGroupArn is a required field
	TargetGroupArn *string `type:"string" required:"true"`

	// The number of consecutive health check failures required before considering
	// the target unhealthy.
	UnhealthyThresholdCount *int64 `min:"2" type:"integer"`
	// contains filtered or unexported fields
}

Contains the parameters for ModifyTargetGroup.

func (ModifyTargetGroupInput) GoString 

func (s ModifyTargetGroupInput) GoString() string

GoString returns the string representation

func (ModifyTargetGroupInput) String 

func (s ModifyTargetGroupInput) String() string

String returns the string representation

func (*ModifyTargetGroupInput) Validate 

func (s *ModifyTargetGroupInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type ModifyTargetGroupOutput 

type ModifyTargetGroupOutput struct {

	// Information about the target group.
	TargetGroups []*TargetGroup `type:"list"`
	// contains filtered or unexported fields
}

Contains the output of ModifyTargetGroup.

func (ModifyTargetGroupOutput) GoString 

func (s ModifyTargetGroupOutput) GoString() string

GoString returns the string representation

func (ModifyTargetGroupOutput) String 

func (s ModifyTargetGroupOutput) String() string

String returns the string representation

type RegisterTargetsInput 

type RegisterTargetsInput struct {

	// The Amazon Resource Name (ARN) of the target group.
	//
	// TargetGroupArn is a required field
	TargetGroupArn *string `type:"string" required:"true"`

	// The targets.
	//
	// Targets is a required field
	Targets []*TargetDescription `type:"list" required:"true"`
	// contains filtered or unexported fields
}

Contains the parameters for RegisterTargets.

func (RegisterTargetsInput) GoString 

func (s RegisterTargetsInput) GoString() string

GoString returns the string representation

func (RegisterTargetsInput) String 

func (s RegisterTargetsInput) String() string

String returns the string representation

func (*RegisterTargetsInput) Validate 

func (s *RegisterTargetsInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type RegisterTargetsOutput 

type RegisterTargetsOutput struct {
	// contains filtered or unexported fields
}

Contains the output of RegisterTargets.

func (RegisterTargetsOutput) GoString 

func (s RegisterTargetsOutput) GoString() string

GoString returns the string representation

func (RegisterTargetsOutput) String 

func (s RegisterTargetsOutput) String() string

String returns the string representation

type RemoveTagsInput 

type RemoveTagsInput struct {

	// The Amazon Resource Name (ARN) of the resource.
	//
	// ResourceArns is a required field
	ResourceArns []*string `type:"list" required:"true"`

	// The tag keys for the tags to remove.
	//
	// TagKeys is a required field
	TagKeys []*string `type:"list" required:"true"`
	// contains filtered or unexported fields
}

Contains the parameters for RemoveTags.

func (RemoveTagsInput) GoString 

func (s RemoveTagsInput) GoString() string

GoString returns the string representation

func (RemoveTagsInput) String 

func (s RemoveTagsInput) String() string

String returns the string representation

func (*RemoveTagsInput) Validate 

func (s *RemoveTagsInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type RemoveTagsOutput 

type RemoveTagsOutput struct {
	// contains filtered or unexported fields
}

Contains the output of RemoveTags.

func (RemoveTagsOutput) GoString 

func (s RemoveTagsOutput) GoString() string

GoString returns the string representation

func (RemoveTagsOutput) String 

func (s RemoveTagsOutput) String() string

String returns the string representation

type Rule 

type Rule struct {

	// The actions.
	Actions []*Action `type:"list"`

	// The conditions.
	Conditions []*RuleCondition `type:"list"`

	// Indicates whether this is the default rule.
	IsDefault *bool `type:"boolean"`

	// The priority.
	Priority *string `type:"string"`

	// The Amazon Resource Name (ARN) of the rule.
	RuleArn *string `type:"string"`
	// contains filtered or unexported fields
}

Information about a rule.

func (Rule) GoString 

func (s Rule) GoString() string

GoString returns the string representation

func (Rule) String 

func (s Rule) String() string

String returns the string representation

type RuleCondition 

type RuleCondition struct {

	// The name of the field. The possible value is path-pattern.
	Field *string `type:"string"`

	// The values for the field.
	//
	// A path pattern is case sensitive, can be up to 255 characters in length,
	// and can contain any of the following characters:
	//
	//   A-Z, a-z, 0-9
	//
	//   _ - . $ / ~ " ' @ : +
	//
	//   &amp; (using &amp;amp;)
	//
	//   * (matches 0 or more characters)
	//
	//   ? (matches exactly 1 character)
	Values []*string `type:"list"`
	// contains filtered or unexported fields
}

Information about a condition for a rule.

func (RuleCondition) GoString 

func (s RuleCondition) GoString() string

GoString returns the string representation

func (RuleCondition) String 

func (s RuleCondition) String() string

String returns the string representation

type RulePriorityPair 

type RulePriorityPair struct {

	// The rule priority.
	Priority *int64 `min:"1" type:"integer"`

	// The Amazon Resource Name (ARN) of the rule.
	RuleArn *string `type:"string"`
	// contains filtered or unexported fields
}

Information about the priorities for the rules for a listener.

func (RulePriorityPair) GoString 

func (s RulePriorityPair) GoString() string

GoString returns the string representation

func (RulePriorityPair) String 

func (s RulePriorityPair) String() string

String returns the string representation

func (*RulePriorityPair) Validate 

func (s *RulePriorityPair) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type SetRulePrioritiesInput 

type SetRulePrioritiesInput struct {

	// The rule priorities.
	//
	// RulePriorities is a required field
	RulePriorities []*RulePriorityPair `type:"list" required:"true"`
	// contains filtered or unexported fields
}

Contains the parameters for SetRulePriorities.

func (SetRulePrioritiesInput) GoString 

func (s SetRulePrioritiesInput) GoString() string

GoString returns the string representation

func (SetRulePrioritiesInput) String 

func (s SetRulePrioritiesInput) String() string

String returns the string representation

func (*SetRulePrioritiesInput) Validate 

func (s *SetRulePrioritiesInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type SetRulePrioritiesOutput 

type SetRulePrioritiesOutput struct {

	// Information about the rules.
	Rules []*Rule `type:"list"`
	// contains filtered or unexported fields
}

Contains the output of SetRulePriorities.

func (SetRulePrioritiesOutput) GoString 

func (s SetRulePrioritiesOutput) GoString() string

GoString returns the string representation

func (SetRulePrioritiesOutput) String 

func (s SetRulePrioritiesOutput) String() string

String returns the string representation

type SetSecurityGroupsInput 

type SetSecurityGroupsInput struct {

	// The Amazon Resource Name (ARN) of the load balancer.
	//
	// LoadBalancerArn is a required field
	LoadBalancerArn *string `type:"string" required:"true"`

	// The IDs of the security groups.
	//
	// SecurityGroups is a required field
	SecurityGroups []*string `type:"list" required:"true"`
	// contains filtered or unexported fields
}

Contains the parameters for SetSecurityGroups.

func (SetSecurityGroupsInput) GoString 

func (s SetSecurityGroupsInput) GoString() string

GoString returns the string representation

func (SetSecurityGroupsInput) String 

func (s SetSecurityGroupsInput) String() string

String returns the string representation

func (*SetSecurityGroupsInput) Validate 

func (s *SetSecurityGroupsInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type SetSecurityGroupsOutput 

type SetSecurityGroupsOutput struct {

	// The IDs of the security groups associated with the load balancer.
	SecurityGroupIds []*string `type:"list"`
	// contains filtered or unexported fields
}

Contains the output of SetSecurityGroups.

func (SetSecurityGroupsOutput) GoString 

func (s SetSecurityGroupsOutput) GoString() string

GoString returns the string representation

func (SetSecurityGroupsOutput) String 

func (s SetSecurityGroupsOutput) String() string

String returns the string representation

type SetSubnetsInput 

type SetSubnetsInput struct {

	// The Amazon Resource Name (ARN) of the load balancer.
	//
	// LoadBalancerArn is a required field
	LoadBalancerArn *string `type:"string" required:"true"`

	// The IDs of the subnets. You must specify at least two subnets. You can add
	// only one subnet per Availability Zone.
	//
	// Subnets is a required field
	Subnets []*string `type:"list" required:"true"`
	// contains filtered or unexported fields
}

Contains the parameters for SetSubnets.

func (SetSubnetsInput) GoString 

func (s SetSubnetsInput) GoString() string

GoString returns the string representation

func (SetSubnetsInput) String 

func (s SetSubnetsInput) String() string

String returns the string representation

func (*SetSubnetsInput) Validate 

func (s *SetSubnetsInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type SetSubnetsOutput 

type SetSubnetsOutput struct {

	// Information about the subnet and Availability Zone.
	AvailabilityZones []*AvailabilityZone `type:"list"`
	// contains filtered or unexported fields
}

Contains the output of SetSubnets.

func (SetSubnetsOutput) GoString 

func (s SetSubnetsOutput) GoString() string

GoString returns the string representation

func (SetSubnetsOutput) String 

func (s SetSubnetsOutput) String() string

String returns the string representation

type SslPolicy 

type SslPolicy struct {

	// The ciphers.
	Ciphers []*Cipher `type:"list"`

	// The name of the policy.
	Name *string `type:"string"`

	// The protocols.
	SslProtocols []*string `type:"list"`
	// contains filtered or unexported fields
}

Information about a policy used for SSL negotiation.

func (SslPolicy) GoString 

func (s SslPolicy) GoString() string

GoString returns the string representation

func (SslPolicy) String 

func (s SslPolicy) String() string

String returns the string representation

type Tag 

type Tag struct {

	// The key of the tag.
	//
	// Key is a required field
	Key *string `min:"1" type:"string" required:"true"`

	// The value of the tag.
	Value *string `type:"string"`
	// contains filtered or unexported fields
}

Information about a tag.

func (Tag) GoString 

func (s Tag) GoString() string

GoString returns the string representation

func (Tag) String 

func (s Tag) String() string

String returns the string representation

func (*Tag) Validate 

func (s *Tag) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type TagDescription 

type TagDescription struct {

	// The Amazon Resource Name (ARN) of the resource.
	ResourceArn *string `type:"string"`

	// Information about the tags.
	Tags []*Tag `min:"1" type:"list"`
	// contains filtered or unexported fields
}

The tags associated with a resource.

func (TagDescription) GoString 

func (s TagDescription) GoString() string

GoString returns the string representation

func (TagDescription) String 

func (s TagDescription) String() string

String returns the string representation

type TargetDescription 

type TargetDescription struct {

	// The ID of the target.
	//
	// Id is a required field
	Id *string `type:"string" required:"true"`

	// The port on which the target is listening.
	Port *int64 `min:"1" type:"integer"`
	// contains filtered or unexported fields
}

Information about a target.

func (TargetDescription) GoString 

func (s TargetDescription) GoString() string

GoString returns the string representation

func (TargetDescription) String 

func (s TargetDescription) String() string

String returns the string representation

func (*TargetDescription) Validate 

func (s *TargetDescription) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type TargetGroup 

type TargetGroup struct {

	// The approximate amount of time, in seconds, between health checks of an individual
	// target.
	HealthCheckIntervalSeconds *int64 `min:"5" type:"integer"`

	// The destination for the health check request.
	HealthCheckPath *string `min:"1" type:"string"`

	// The port to use to connect with the target.
	HealthCheckPort *string `type:"string"`

	// The protocol to use to connect with the target.
	HealthCheckProtocol *string `type:"string" enum:"ProtocolEnum"`

	// The amount of time, in seconds, during which no response means a failed health
	// check.
	HealthCheckTimeoutSeconds *int64 `min:"2" type:"integer"`

	// The number of consecutive health checks successes required before considering
	// an unhealthy target healthy.
	HealthyThresholdCount *int64 `min:"2" type:"integer"`

	// The Amazon Resource Names (ARN) of the load balancers that route traffic
	// to this target group.
	LoadBalancerArns []*string `type:"list"`

	// The HTTP codes to use when checking for a successful response from a target.
	Matcher *Matcher `type:"structure"`

	// The port on which the targets are listening.
	Port *int64 `min:"1" type:"integer"`

	// The protocol to use for routing traffic to the targets.
	Protocol *string `type:"string" enum:"ProtocolEnum"`

	// The Amazon Resource Name (ARN) of the target group.
	TargetGroupArn *string `type:"string"`

	// The name of the target group.
	TargetGroupName *string `type:"string"`

	// The number of consecutive health check failures required before considering
	// the target unhealthy.
	UnhealthyThresholdCount *int64 `min:"2" type:"integer"`

	// The ID of the VPC for the targets.
	VpcId *string `type:"string"`
	// contains filtered or unexported fields
}

Information about a target group.

func (TargetGroup) GoString 

func (s TargetGroup) GoString() string

GoString returns the string representation

func (TargetGroup) String 

func (s TargetGroup) String() string

String returns the string representation

type TargetGroupAttribute 

type TargetGroupAttribute struct {

	// The name of the attribute.
	//
	//    deregistration_delay.timeout_seconds - The amount time for Elastic Load
	// Balancing to wait before changing the state of a deregistering target from
	// draining to unused. The range is 0-3600 seconds. The default value is 300
	// seconds.
	//
	//    stickiness.enabled - Indicates whether sticky sessions are enabled.
	//
	//    stickiness.type - The type of sticky sessions. The possible value is
	// lb_cookie.
	//
	//    stickiness.lb_cookie.duration_seconds - The time period, in seconds,
	// during which requests from a client should be routed to the same target.
	// After this time period expires, the load balancer-generated cookie is considered
	// stale. The range is 1 second to 1 week (604800 seconds). The default value
	// is 1 day (86400 seconds).
	Key *string `type:"string"`

	// The value of the attribute.
	Value *string `type:"string"`
	// contains filtered or unexported fields
}

Information about a target group attribute.

func (TargetGroupAttribute) GoString 

func (s TargetGroupAttribute) GoString() string

GoString returns the string representation

func (TargetGroupAttribute) String 

func (s TargetGroupAttribute) String() string

String returns the string representation

type TargetHealth 

type TargetHealth struct {

	// A description of the target health that provides additional details. If the
	// state is healthy, a description is not provided.
	Description *string `type:"string"`

	// The reason code. If the target state is healthy, a reason code is not provided.
	//
	// If the target state is initial, the reason code can be one of the following
	// values:
	//
	//    Elb.RegistrationInProgress - The target is in the process of being registered
	// with the load balancer.
	//
	//    Elb.InitialHealthChecking - The load balancer is still sending the target
	// the minimum number of health checks required to determine its health status.
	//
	//   If the target state is unhealthy, the reason code can be one of the following
	// values:
	//
	//    Target.ResponseCodeMismatch - The health checks did not return an expected
	// HTTP code.
	//
	//    Target.Timeout - The health check requests timed out.
	//
	//    Target.FailedHealthChecks - The health checks failed because the connection
	// to the target timed out, the target response was malformed, or the target
	// failed the health check for an unknown reason.
	//
	//    Elb.InternalError - The health checks failed due to an internal error.
	//
	//   If the target state is unused, the reason code can be one of the following
	// values:
	//
	//    Target.NotRegistered - The target is not registered with the target group.
	//
	//    Target.NotInUse - The target group is not used by any load balancer or
	// the target is in an Availability Zone that is not enabled for its load balancer.
	//
	//    Target.InvalidState - The target is in the stopped or terminated state.
	//
	//   If the target state is draining, the reason code can be the following
	// value:
	//
	//    Target.DeregistrationInProgress - The target is in the process of being
	// deregistered and the deregistration delay period has not expired.
	Reason *string `type:"string" enum:"TargetHealthReasonEnum"`

	// The state of the target.
	State *string `type:"string" enum:"TargetHealthStateEnum"`
	// contains filtered or unexported fields
}

Information about the current health of a target.

func (TargetHealth) GoString 

func (s TargetHealth) GoString() string

GoString returns the string representation

func (TargetHealth) String 

func (s TargetHealth) String() string

String returns the string representation

type TargetHealthDescription 

type TargetHealthDescription struct {

	// The port to use to connect with the target.
	HealthCheckPort *string `type:"string"`

	// The description of the target.
	Target *TargetDescription `type:"structure"`

	// The health information for the target.
	TargetHealth *TargetHealth `type:"structure"`
	// contains filtered or unexported fields
}

Information about the health of a target.

func (TargetHealthDescription) GoString 

func (s TargetHealthDescription) GoString() string

GoString returns the string representation

func (TargetHealthDescription) String 

func (s TargetHealthDescription) String() string

String returns the string representation

Source Files

View all Source files

Directories

Path Synopsis
Package elbv2iface provides an interface to enable mocking the Elastic Load Balancing service client for testing your code.
 Package elbv2iface provides an interface to enable mocking the Elastic Load Balancing service client for testing your code.

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL
go.dev uses cookies from Google to deliver and enhance the quality of its services and to analyze traffic. Learn more.