entity_mib

package
v0.0.0-...-fac1166 Latest Latest
Warning

This package is not in the latest version of its module.

 Go to latest Published: Oct 17, 2019 License: Apache-2.0 Imports: 6 Imported by: 0

Documentation

Overview

The MIB module for representing multiple logical entities supported by a single SNMP agent.

Copyright (C) The Internet Society (2005). This version of this MIB module is part of RFC 4133; see the RFC itself for full legal notices.

Index

Constants

This section is empty.

Variables

This section is empty.

Functions

This section is empty.

Types

type ENTITYMIB 

type ENTITYMIB struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter

	EntityGeneral ENTITYMIB_EntityGeneral

	// This table contains one row per physical entity.  There is always at least
	// one row for an 'overall' physical entity.
	EntPhysicalTable ENTITYMIB_EntPhysicalTable

	// This table contains one row per logical entity.  For agents that implement
	// more than one naming scope, at least one entry must exist.  Agents which
	// instantiate all MIB objects within a single naming scope are not required
	// to implement this table.
	EntLogicalTable ENTITYMIB_EntLogicalTable

	// This table contains zero or more rows of logical entity to physical
	// equipment associations.  For each logical entity known by this agent, there
	// are zero or more mappings to the physical resources, which are used to
	// realize that logical entity.  An agent should limit the number and nature
	// of entries in this table such that only meaningful and non-redundant
	// information is returned.  For example, in a system that contains a single
	// power supply, mappings between logical entities and the power supply are
	// not useful and should not be included.  Also, only the most appropriate
	// physical component, which is closest to the root of a particular
	// containment tree, should be identified in an entLPMapping entry.  For
	// example, suppose a bridge is realized on a particular module, and all ports
	// on that module are ports on this bridge.  A mapping between the bridge and
	// the module would be useful, but additional mappings between the bridge and
	// each of the ports on that module would be redundant (because the
	// entPhysicalContainedIn hierarchy can provide the same information).  On the
	// other hand, if more than one bridge were utilizing ports on this module,
	// then mappings between each bridge and the ports it used would be
	// appropriate.  Also, in the case of a single backplane repeater, a mapping
	// for the backplane to the single repeater entity is not necessary.
	EntLPMappingTable ENTITYMIB_EntLPMappingTable

	// This table contains zero or more rows, representing mappings of logical
	// entity and physical component to external MIB identifiers.  Each physical
	// port in the system may be associated with a mapping to an external
	// identifier, which itself is associated with a particular logical entity's
	// naming scope.  A 'wildcard' mechanism is provided to indicate that an
	// identifier is associated with more than one logical entity.
	EntAliasMappingTable ENTITYMIB_EntAliasMappingTable

	// A table that exposes the container/'containee' relationships between
	// physical entities.  This table provides all the information found by
	// constructing the virtual containment tree for a given entPhysicalTable, but
	// in a more direct format.  In the event a physical entity is contained by
	// more than one other physical entity (e.g., double-wide modules), this table
	// should include these additional mappings, which cannot be represented in
	// the entPhysicalTable virtual containment tree.
	EntPhysicalContainsTable ENTITYMIB_EntPhysicalContainsTable
}

ENTITYMIB

func (*ENTITYMIB) GetEntityData 

func (eNTITYMIB *ENTITYMIB) GetEntityData() *types.CommonEntityData

type ENTITYMIB_EntAliasMappingTable 

type ENTITYMIB_EntAliasMappingTable struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter

	// Information about a particular physical equipment, logical   entity to
	// external identifier binding.  Each logical entity/physical component pair
	// may be associated with one alias mapping.  The logical entity index may
	// also be used as a 'wildcard' (refer to the entAliasLogicalIndexOrZero
	// object DESCRIPTION clause for details.)  Note that only entPhysicalIndex
	// values that represent physical ports (i.e., associated entPhysicalClass
	// value is 'port(10)') are permitted to exist in this table. The type is
	// slice of ENTITYMIB_EntAliasMappingTable_EntAliasMappingEntry.
	EntAliasMappingEntry []*ENTITYMIB_EntAliasMappingTable_EntAliasMappingEntry
}

ENTITYMIB_EntAliasMappingTable This table contains zero or more rows, representing mappings of logical entity and physical component to external MIB identifiers. Each physical port in the system may be associated with a mapping to an external identifier, which itself is associated with a particular logical entity's naming scope. A 'wildcard' mechanism is provided to indicate that an identifier is associated with more than one logical entity.

func (*ENTITYMIB_EntAliasMappingTable) GetEntityData 

func (entAliasMappingTable *ENTITYMIB_EntAliasMappingTable) GetEntityData() *types.CommonEntityData

type ENTITYMIB_EntAliasMappingTable_EntAliasMappingEntry 

type ENTITYMIB_EntAliasMappingTable_EntAliasMappingEntry struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter
	YListKey   string

	// This attribute is a key. The type is string with range: 1..2147483647.
	// Refers to
	// entity_mib.ENTITYMIB_EntPhysicalTable_EntPhysicalEntry_EntPhysicalIndex
	EntPhysicalIndex interface{}

	// This attribute is a key. The value of this object identifies the logical
	// entity that defines the naming scope for the associated instance of the
	// 'entAliasMappingIdentifier' object.  If this object has a non-zero value,
	// then it identifies the logical entity named by the same value of
	// entLogicalIndex.  If this object has a value of zero, then the mapping
	// between the physical component and the alias identifier for this
	// entAliasMapping entry is associated with all unspecified logical entities.
	// That is, a value of zero (the default mapping) identifies any logical
	// entity that does not have an explicit entry in this table for a particular
	// entPhysicalIndex/entAliasMappingIdentifier pair.  For example, to indicate
	// that a particular interface (e.g., physical component 33) is identified by
	// the same value of ifIndex for all logical entities, the following instance
	// might exist:          entAliasMappingIdentifier.33.0 = ifIndex.5  In the
	// event an entPhysicalEntry is associated differently for some logical
	// entities, additional entAliasMapping entries may exist, e.g.:
	// entAliasMappingIdentifier.33.0 = ifIndex.6
	// entAliasMappingIdentifier.33.4 =  ifIndex.1
	// entAliasMappingIdentifier.33.5 =  ifIndex.1
	// entAliasMappingIdentifier.33.10 = ifIndex.12  Note that entries with
	// non-zero entAliasLogicalIndexOrZero index values have precedence over
	// zero-indexed entries.  In this example, all logical entities except 4, 5,
	// and 10, associate physical entity 33 with ifIndex.6. The type is
	// interface{} with range: 0..2147483647.
	EntAliasLogicalIndexOrZero interface{}

	// The value of this object identifies a particular conceptual row associated
	// with the indicated entPhysicalIndex and entLogicalIndex pair.  Because only
	// physical ports are modeled in this table, only entries that represent
	// interfaces or ports are allowed.  If an ifEntry exists on behalf of a
	// particular physical port, then this object should identify the associated
	// 'ifEntry'. For repeater ports, the appropriate row in the
	// 'rptrPortGroupTable' should be identified instead.  For example, suppose a
	// physical port was represented by entPhysicalEntry.3, entLogicalEntry.15
	// existed for a repeater, and entLogicalEntry.22 existed for a bridge.  Then
	// there might be two related instances of entAliasMappingIdentifier:
	// entAliasMappingIdentifier.3.15 == rptrPortGroupIndex.5.2
	// entAliasMappingIdentifier.3.22 == ifIndex.17 It is possible that other
	// mappings (besides interfaces and repeater ports) may be defined in the
	// future, as required.  Bridge ports are identified by examining the Bridge
	// MIB and appropriate ifEntries associated with each 'dot1dBasePort', and are
	// thus not represented in this table. The type is string with pattern:
	// (([0-1](\.[1-3]?[0-9]))|(2\.(0|([1-9]\d*))))(\.(0|([1-9]\d*)))*.
	EntAliasMappingIdentifier interface{}
}

ENTITYMIB_EntAliasMappingTable_EntAliasMappingEntry Information about a particular physical equipment, logical

entity to external identifier binding. Each logical entity/physical component pair may be associated with one alias mapping. The logical entity index may also be used as a 'wildcard' (refer to the entAliasLogicalIndexOrZero object DESCRIPTION clause for details.)

Note that only entPhysicalIndex values that represent physical ports (i.e., associated entPhysicalClass value is 'port(10)') are permitted to exist in this table.

func (*ENTITYMIB_EntAliasMappingTable_EntAliasMappingEntry) GetEntityData 

func (entAliasMappingEntry *ENTITYMIB_EntAliasMappingTable_EntAliasMappingEntry) GetEntityData() *types.CommonEntityData

type ENTITYMIB_EntLPMappingTable 

type ENTITYMIB_EntLPMappingTable struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter

	// Information about a particular logical entity to physical equipment
	// association.  Note that the nature of the association is not specifically
	// identified in this entry. It is expected that sufficient information exists
	// in the MIBs used to manage a particular logical entity to infer how
	// physical component information is utilized. The type is slice of
	// ENTITYMIB_EntLPMappingTable_EntLPMappingEntry.
	EntLPMappingEntry []*ENTITYMIB_EntLPMappingTable_EntLPMappingEntry
}

ENTITYMIB_EntLPMappingTable This table contains zero or more rows of logical entity to physical equipment associations. For each logical entity known by this agent, there are zero or more mappings to the physical resources, which are used to realize that logical entity.

An agent should limit the number and nature of entries in this table such that only meaningful and non-redundant information is returned. For example, in a system that contains a single power supply, mappings between logical entities and the power supply are not useful and should not be included.

Also, only the most appropriate physical component, which is closest to the root of a particular containment tree, should be identified in an entLPMapping entry.

For example, suppose a bridge is realized on a particular module, and all ports on that module are ports on this bridge. A mapping between the bridge and the module would be useful, but additional mappings between the bridge and each of the ports on that module would be redundant (because the entPhysicalContainedIn hierarchy can provide the same information). On the other hand, if more than one bridge were utilizing ports on this module, then mappings between each bridge and the ports it used would be appropriate.

Also, in the case of a single backplane repeater, a mapping for the backplane to the single repeater entity is not necessary.

func (*ENTITYMIB_EntLPMappingTable) GetEntityData 

func (entLPMappingTable *ENTITYMIB_EntLPMappingTable) GetEntityData() *types.CommonEntityData

type ENTITYMIB_EntLPMappingTable_EntLPMappingEntry 

type ENTITYMIB_EntLPMappingTable_EntLPMappingEntry struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter
	YListKey   string

	// This attribute is a key. The type is string with range: 1..2147483647.
	// Refers to
	// entity_mib.ENTITYMIB_EntLogicalTable_EntLogicalEntry_EntLogicalIndex
	EntLogicalIndex interface{}

	// This attribute is a key. The value of this object identifies the index
	// value of a particular entPhysicalEntry associated with the indicated
	// entLogicalEntity. The type is interface{} with range: 1..2147483647.
	EntLPPhysicalIndex interface{}
}

ENTITYMIB_EntLPMappingTable_EntLPMappingEntry Information about a particular logical entity to physical equipment association. Note that the nature of the association is not specifically identified in this entry. It is expected that sufficient information exists in the MIBs used to manage a particular logical entity to infer how physical component information is utilized.

func (*ENTITYMIB_EntLPMappingTable_EntLPMappingEntry) GetEntityData 

func (entLPMappingEntry *ENTITYMIB_EntLPMappingTable_EntLPMappingEntry) GetEntityData() *types.CommonEntityData

type ENTITYMIB_EntLogicalTable 

type ENTITYMIB_EntLogicalTable struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter

	// Information about a particular logical entity.  Entities may be managed by
	// this agent or other SNMP agents (possibly) in the same chassis. The type is
	// slice of ENTITYMIB_EntLogicalTable_EntLogicalEntry.
	EntLogicalEntry []*ENTITYMIB_EntLogicalTable_EntLogicalEntry
}

ENTITYMIB_EntLogicalTable This table contains one row per logical entity. For agents that implement more than one naming scope, at least one entry must exist. Agents which instantiate all MIB objects within a single naming scope are not required to implement this table.

func (*ENTITYMIB_EntLogicalTable) GetEntityData 

func (entLogicalTable *ENTITYMIB_EntLogicalTable) GetEntityData() *types.CommonEntityData

type ENTITYMIB_EntLogicalTable_EntLogicalEntry 

type ENTITYMIB_EntLogicalTable_EntLogicalEntry struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter
	YListKey   string

	// This attribute is a key. The value of this object uniquely identifies the
	// logical entity.  The value should be a small positive integer; index values
	// for different logical entities are not necessarily contiguous. The type is
	// interface{} with range: 1..2147483647.
	EntLogicalIndex interface{}

	// A textual description of the logical entity.  This object should contain a
	// string that identifies the manufacturer's name for the logical entity, and
	// should be set to a distinct value for each version of the logical entity.
	// The type is string.
	EntLogicalDescr interface{}

	// An indication of the type of logical entity.  This will typically be the
	// OBJECT IDENTIFIER name of the node in the SMI's naming hierarchy which
	// represents the major MIB module, or the majority of the MIB modules,
	// supported by the logical entity.  For example:    a logical entity of a
	// regular host/router -> mib-2    a logical entity of a 802.1d bridge ->
	// dot1dBridge    a logical entity of a 802.3 repeater -> snmpDot3RptrMgmt If
	// an appropriate node in the SMI's naming hierarchy cannot be identified, the
	// value 'mib-2' should be used. The type is string with pattern:
	// (([0-1](\.[1-3]?[0-9]))|(2\.(0|([1-9]\d*))))(\.(0|([1-9]\d*)))*.
	EntLogicalType interface{}

	// An SNMPv1 or SNMPv2C community-string, which can be used to access detailed
	// management information for this logical entity.  The agent should allow
	// read access with this community string (to an appropriate subset of all
	// managed objects) and may also return a community string based on the
	// privileges of the request used to read this object.  Note that an agent may
	// return a community string with read-only privileges, even if this object is
	// accessed with a read-write community string.  However, the agent must take
	// care not to return a community string that allows more privileges than the
	// community string used to access this object.  A compliant SNMP agent may
	// wish to conserve naming scopes by representing multiple logical entities in
	// a single 'default' naming scope.  This is possible when the logical
	// entities, represented by the same value of entLogicalCommunity, have no
	// object instances in common.  For example, 'bridge1' and 'repeater1' may be
	// part of the main naming scope, but at least one additional community string
	// is needed to represent 'bridge2' and 'repeater2'.  Logical entities
	// 'bridge1' and 'repeater1' would be represented by sysOREntries associated
	// with the 'default' naming scope.  For agents not accessible via SNMPv1 or
	// SNMPv2C, the value of this object is the empty string.  This object may
	// also contain an empty string if a community string has not yet been
	// assigned by the agent, or if no community string with suitable access
	// rights can be returned for a particular SNMP request.  Note that this
	// object is deprecated.  Agents which implement SNMPv3 access should use the
	// entLogicalContextEngineID and entLogicalContextName objects to identify the
	// context associated with each logical entity.  SNMPv3 agents may return a
	// zero-length string for this object, or may continue to return a community
	// string (e.g., tri-lingual agent support). The type is string with length:
	// 0..255.
	EntLogicalCommunity interface{}

	// The transport service address by which the logical entity receives network
	// management traffic, formatted according to the corresponding value of
	// entLogicalTDomain.  For snmpUDPDomain, a TAddress is 6 octets long: the
	// initial 4 octets contain the IP-address in network-byte order and the last
	// 2 contain the UDP port in network-byte order. Consult 'Transport Mappings
	// for the Simple Network Management Protocol' (STD 62, RFC 3417 [RFC3417])
	// for further information on snmpUDPDomain. The type is string with length:
	// 1..255.
	EntLogicalTAddress interface{}

	// Indicates the kind of transport service by which the logical entity
	// receives network management traffic. Possible values for this object are
	// presently found in the Transport Mappings for Simple Network Management
	// Protocol' (STD 62, RFC 3417 [RFC3417]). The type is string with pattern:
	// (([0-1](\.[1-3]?[0-9]))|(2\.(0|([1-9]\d*))))(\.(0|([1-9]\d*)))*.
	EntLogicalTDomain interface{}

	// The authoritative contextEngineID that can be used to send an SNMP message
	// concerning information held by this logical entity, to the address
	// specified by the associated 'entLogicalTAddress/entLogicalTDomain' pair.
	// This object, together with the associated entLogicalContextName object,
	// defines the context associated with a particular logical entity, and allows
	// access to SNMP engines identified by a contextEngineId and contextName
	// pair.  If no value has been configured by the agent, a zero-length string
	// is returned, or the agent may choose not to instantiate this object at all.
	// The type is string with length: 0..32.
	EntLogicalContextEngineID interface{}

	// The contextName that can be used to send an SNMP message concerning
	// information held by this logical entity, to the address specified by the
	// associated 'entLogicalTAddress/entLogicalTDomain' pair.  This object,
	// together with the associated entLogicalContextEngineID object, defines the
	// context associated with a particular logical entity, and allows   access to
	// SNMP engines identified by a contextEngineId and contextName pair.  If no
	// value has been configured by the agent, a zero-length string is returned,
	// or the agent may choose not to instantiate this object at all. The type is
	// string.
	EntLogicalContextName interface{}
}

ENTITYMIB_EntLogicalTable_EntLogicalEntry Information about a particular logical entity. Entities may be managed by this agent or other SNMP agents (possibly) in the same chassis.

func (*ENTITYMIB_EntLogicalTable_EntLogicalEntry) GetEntityData 

func (entLogicalEntry *ENTITYMIB_EntLogicalTable_EntLogicalEntry) GetEntityData() *types.CommonEntityData

type ENTITYMIB_EntPhysicalContainsTable 

type ENTITYMIB_EntPhysicalContainsTable struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter

	// A single container/'containee' relationship. The type is slice of
	// ENTITYMIB_EntPhysicalContainsTable_EntPhysicalContainsEntry.
	EntPhysicalContainsEntry []*ENTITYMIB_EntPhysicalContainsTable_EntPhysicalContainsEntry
}

ENTITYMIB_EntPhysicalContainsTable A table that exposes the container/'containee' relationships between physical entities. This table provides all the information found by constructing the virtual containment tree for a given entPhysicalTable, but in a more direct format.

In the event a physical entity is contained by more than one other physical entity (e.g., double-wide modules), this table should include these additional mappings, which cannot be represented in the entPhysicalTable virtual containment tree.

func (*ENTITYMIB_EntPhysicalContainsTable) GetEntityData 

func (entPhysicalContainsTable *ENTITYMIB_EntPhysicalContainsTable) GetEntityData() *types.CommonEntityData

type ENTITYMIB_EntPhysicalContainsTable_EntPhysicalContainsEntry 

type ENTITYMIB_EntPhysicalContainsTable_EntPhysicalContainsEntry struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter
	YListKey   string

	// This attribute is a key. The type is string with range: 1..2147483647.
	// Refers to
	// entity_mib.ENTITYMIB_EntPhysicalTable_EntPhysicalEntry_EntPhysicalIndex
	EntPhysicalIndex interface{}

	// This attribute is a key. The value of entPhysicalIndex for the contained
	// physical entity. The type is interface{} with range: 1..2147483647.
	EntPhysicalChildIndex interface{}
}

ENTITYMIB_EntPhysicalContainsTable_EntPhysicalContainsEntry A single container/'containee' relationship.

func (*ENTITYMIB_EntPhysicalContainsTable_EntPhysicalContainsEntry) GetEntityData 

func (entPhysicalContainsEntry *ENTITYMIB_EntPhysicalContainsTable_EntPhysicalContainsEntry) GetEntityData() *types.CommonEntityData

type ENTITYMIB_EntPhysicalTable 

type ENTITYMIB_EntPhysicalTable struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter

	// Information about a particular physical entity.  Each entry provides
	// objects (entPhysicalDescr, entPhysicalVendorType, and entPhysicalClass) to
	// help an NMS identify and characterize the entry, and objects
	// (entPhysicalContainedIn and entPhysicalParentRelPos) to help an NMS relate
	// the particular entry to other entries in this table. The type is slice of
	// ENTITYMIB_EntPhysicalTable_EntPhysicalEntry.
	EntPhysicalEntry []*ENTITYMIB_EntPhysicalTable_EntPhysicalEntry
}

ENTITYMIB_EntPhysicalTable This table contains one row per physical entity. There is always at least one row for an 'overall' physical entity.

func (*ENTITYMIB_EntPhysicalTable) GetEntityData 

func (entPhysicalTable *ENTITYMIB_EntPhysicalTable) GetEntityData() *types.CommonEntityData

type ENTITYMIB_EntPhysicalTable_EntPhysicalEntry 

type ENTITYMIB_EntPhysicalTable_EntPhysicalEntry struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter
	YListKey   string

	// This attribute is a key. The index for this entry. The type is interface{}
	// with range: 1..2147483647.
	EntPhysicalIndex interface{}

	// A textual description of physical entity.  This object should contain a
	// string that identifies the manufacturer's name for the physical entity, and
	// should be set to a distinct value for each version or model of the physical
	// entity. The type is string.
	EntPhysicalDescr interface{}

	// An indication of the vendor-specific hardware type of the physical entity.
	// Note that this is different from the definition of MIB-II's sysObjectID.
	// An agent should set this object to an enterprise-specific registration
	// identifier value indicating the specific equipment type in detail.  The
	// associated instance of entPhysicalClass is used to indicate the general
	// type of hardware device.  If no vendor-specific registration identifier
	// exists for this physical entity, or the value is unknown by this agent,
	// then the value { 0 0 } is returned. The type is string with pattern:
	// (([0-1](\.[1-3]?[0-9]))|(2\.(0|([1-9]\d*))))(\.(0|([1-9]\d*)))*.
	EntPhysicalVendorType interface{}

	// The value of entPhysicalIndex for the physical entity which 'contains' this
	// physical entity.  A value of zero indicates this physical entity is not
	// contained in any other physical entity.  Note that the set of 'containment'
	// relationships define a strict hierarchy; that is, recursion is not allowed.
	// In the event that a physical entity is contained by more than one physical
	// entity (e.g., double-wide modules), this object should identify the
	// containing entity with the lowest value of entPhysicalIndex. The type is
	// interface{} with range: 0..2147483647.
	EntPhysicalContainedIn interface{}

	// An indication of the general hardware type of the physical entity.  An
	// agent should set this object to the standard enumeration value that most
	// accurately indicates the general class of the physical entity, or the
	// primary class if there is more than one entity.  If no appropriate standard
	// registration identifier exists for this physical entity, then the value
	// 'other(1)' is returned.  If the value is unknown by this agent, then the
	// value 'unknown(2)' is returned. The type is PhysicalClass.
	EntPhysicalClass interface{}

	// An indication of the relative position of this 'child' component among all
	// its 'sibling' components.  Sibling components are defined as
	// entPhysicalEntries that share the same instance values of each of the
	// entPhysicalContainedIn and entPhysicalClass objects.  An NMS can use this
	// object to identify the relative ordering for all sibling components of a
	// particular parent (identified by the entPhysicalContainedIn instance in
	// each sibling entry).  If possible, this value should match any external
	// labeling of the physical component.  For example, for a container (e.g.,
	// card slot) labeled as 'slot #3', entPhysicalParentRelPos should have the
	// value '3'.  Note that the entPhysicalEntry for the module plugged in slot 3
	// should have an entPhysicalParentRelPos value of '1'.  If the physical
	// position of this component does not match any external numbering or clearly
	// visible ordering, then user documentation or other external reference
	// material should be used to determine the parent-relative position. If this
	// is not possible, then the agent should assign a consistent (but possibly
	// arbitrary) ordering to a given set of 'sibling' components, perhaps based
	// on internal representation of the components.   If the agent cannot
	// determine the parent-relative position for some reason, or if the
	// associated value of entPhysicalContainedIn is '0', then the value '-1' is
	// returned.  Otherwise, a non-negative integer is returned, indicating the
	// parent-relative position of this physical entity.  Parent-relative ordering
	// normally starts from '1' and continues to 'N', where 'N' represents the
	// highest positioned child entity.  However, if the physical entities (e.g.,
	// slots) are labeled from a starting position of zero, then the first sibling
	// should be associated with an entPhysicalParentRelPos value of '0'.  Note
	// that this ordering may be sparse or dense, depending on agent
	// implementation.  The actual values returned are not globally meaningful, as
	// each 'parent' component may use different numbering algorithms.  The
	// ordering is only meaningful among siblings of the same parent component.
	// The agent should retain parent-relative position values across reboots,
	// either through algorithmic assignment or use of non-volatile storage. The
	// type is interface{} with range: -1..2147483647.
	EntPhysicalParentRelPos interface{}

	// The textual name of the physical entity.  The value of this object should
	// be the name of the component as assigned by the local device and should be
	// suitable for use in commands entered at the device's `console'.  This might
	// be a text name (e.g., `console') or a simple component number (e.g., port
	// or module number, such as `1'), depending on the physical component naming
	// syntax of the device.  If there is no local name, or if this object is
	// otherwise not applicable, then this object contains a zero-length string.
	// Note that the value of entPhysicalName for two physical entities will be
	// the same in the event that the console interface does not distinguish
	// between them, e.g., slot-1 and the card in slot-1. The type is string.
	EntPhysicalName interface{}

	// The vendor-specific hardware revision string for the physical entity.  The
	// preferred value is the hardware revision identifier actually printed on the
	// component itself (if present).  Note that if revision information is stored
	// internally in a non-printable (e.g., binary) format, then the agent must
	// convert such information to a printable format, in an
	// implementation-specific manner.  If no specific hardware revision string is
	// associated with the physical component, or if this information is unknown
	// to the agent, then this object will contain a zero-length string. The type
	// is string.
	EntPhysicalHardwareRev interface{}

	// The vendor-specific firmware revision string for the physical entity.  Note
	// that if revision information is stored internally in a non-printable (e.g.,
	// binary) format, then the agent must convert such information to a printable
	// format, in an implementation-specific manner.  If no specific firmware
	// programs are associated with the physical component, or if this information
	// is unknown to the agent, then this object will contain a zero-length
	// string. The type is string.
	EntPhysicalFirmwareRev interface{}

	// The vendor-specific software revision string for the physical entity.  Note
	// that if revision information is stored internally in a   non-printable
	// (e.g., binary) format, then the agent must convert such information to a
	// printable format, in an implementation-specific manner.  If no specific
	// software programs are associated with the physical component, or if this
	// information is unknown to the agent, then this object will contain a
	// zero-length string. The type is string.
	EntPhysicalSoftwareRev interface{}

	// The vendor-specific serial number string for the physical entity.  The
	// preferred value is the serial number string actually printed on the
	// component itself (if present).  On the first instantiation of an physical
	// entity, the value of entPhysicalSerialNum associated with that entity is
	// set to the correct vendor-assigned serial number, if this information is
	// available to the agent.  If a serial number is unknown or non-existent, the
	// entPhysicalSerialNum will be set to a zero-length string instead.  Note
	// that implementations that can correctly identify the serial numbers of all
	// installed physical entities do not need to provide write access to the
	// entPhysicalSerialNum object.  Agents which cannot provide non-volatile
	// storage for the entPhysicalSerialNum strings are not required to implement
	// write access for this object.  Not every physical component will have a
	// serial number, or even need one.  Physical entities for which the
	// associated value of the entPhysicalIsFRU object is equal to 'false(2)'
	// (e.g., the repeater ports within a repeater module), do not need their own
	// unique serial number.  An agent does not have to provide write access for
	// such entities, and may return a zero-length string.  If write access is
	// implemented for an instance of entPhysicalSerialNum, and a value is written
	// into the instance, the agent must retain the supplied value in the
	// entPhysicalSerialNum instance (associated with the same physical entity)
	// for as long as that entity remains instantiated.  This includes
	// instantiations across all re-initializations/reboots of the network
	// management system, including those resulting in a change of the physical
	// entity's entPhysicalIndex value. The type is string with length: 0..32.
	EntPhysicalSerialNum interface{}

	// The name of the manufacturer of this physical component. The preferred
	// value is the manufacturer name string actually printed on the component
	// itself (if present).  Note that comparisons between instances of the
	// entPhysicalModelName, entPhysicalFirmwareRev, entPhysicalSoftwareRev, and
	// the entPhysicalSerialNum objects, are only meaningful amongst
	// entPhysicalEntries with the same value of entPhysicalMfgName.  If the
	// manufacturer name string associated with the physical component is unknown
	// to the agent, then this object will contain a zero-length string. The type
	// is string.
	EntPhysicalMfgName interface{}

	// The vendor-specific model name identifier string associated with this
	// physical component.  The preferred value is the customer-visible part
	// number, which may be printed on the component itself.  If the model name
	// string associated with the physical component is unknown to the agent, then
	// this object will contain a zero-length string. The type is string.
	EntPhysicalModelName interface{}

	// This object is an 'alias' name for the physical entity, as specified by a
	// network manager, and provides a non-volatile 'handle' for the physical
	// entity.  On the first instantiation of a physical entity, the value   of
	// entPhysicalAlias associated with that entity is set to the zero-length
	// string.  However, the agent may set the value to a locally unique default
	// value, instead of a zero-length string.  If write access is implemented for
	// an instance of entPhysicalAlias, and a value is written into the instance,
	// the agent must retain the supplied value in the entPhysicalAlias instance
	// (associated with the same physical entity) for as long as that entity
	// remains instantiated. This includes instantiations across all
	// re-initializations/reboots of the network management system, including
	// those resulting in a change of the physical entity's entPhysicalIndex
	// value. The type is string with length: 0..32.
	EntPhysicalAlias interface{}

	// This object is a user-assigned asset tracking identifier (as specified by a
	// network manager) for the physical entity, and provides non-volatile storage
	// of this information.  On the first instantiation of a physical entity, the
	// value of entPhysicalAssetID associated with that entity is set to the
	// zero-length string.  Not every physical component will have an asset
	// tracking identifier, or even need one.  Physical entities for which the
	// associated value of the entPhysicalIsFRU object is equal to 'false(2)'
	// (e.g., the repeater ports within a repeater module), do not need their own
	// unique asset tracking identifier.  An agent does not have to provide write
	// access for such entities, and may instead return a zero-length string.  If
	// write access is implemented for an instance of entPhysicalAssetID, and a
	// value is written into the instance, the agent must retain the supplied
	// value in the entPhysicalAssetID instance (associated with the same physical
	// entity) for as long as that entity remains instantiated.  This includes
	// instantiations across all re-initializations/reboots of the network
	// management system, including those resulting in a change of the physical
	// entity's entPhysicalIndex value.   If no asset tracking information is
	// associated with the physical component, then this object will contain a
	// zero-length string. The type is string with length: 0..32.
	EntPhysicalAssetID interface{}

	// This object indicates whether or not this physical entity is considered a
	// 'field replaceable unit' by the vendor.  If this object contains the value
	// 'true(1)' then this entPhysicalEntry identifies a field replaceable unit.
	// For all entPhysicalEntries that represent components permanently contained
	// within a field replaceable unit, the value 'false(2)' should be returned
	// for this object. The type is bool.
	EntPhysicalIsFRU interface{}

	// This object contains the date of manufacturing of the managed entity.  If
	// the manufacturing date is unknown or not supported, the object is not
	// instantiated.  The special value '0000000000000000'H may also be returned
	// in this case. The type is string.
	EntPhysicalMfgDate interface{}

	// This object contains additional identification information about the
	// physical entity.  The object contains URIs and, therefore, the syntax of
	// this object must conform to RFC 3986, section 2.  Multiple URIs may be
	// present and are separated by white space characters.  Leading and trailing
	// white space characters are ignored.  If no additional identification
	// information is known about the physical entity or supported, the object is
	// not instantiated.  A zero length octet string may also be   returned in
	// this case. The type is string.
	EntPhysicalUris interface{}

	// This object represents the vendor-specific second serial number string for
	// the physical entity.  The first serial number string of the physical entity
	// is represented in the value of corresponding  instance of the
	// 'entPhysicalSerialNum' object.  On the first instantiation of an physical
	// entity, the value of this object is the correct vendor-assigned second
	// serial number, if this information is available to the agent.   If the
	// second serial number is unknown or non-existent, then  the value of this
	// object will be a zero-length string instead.  Note that implementations
	// which can correctly identify the second serial numbers of all installed
	// physical entities do  not need to provide write access to this object.
	// Agents which cannot provide non-volatile storage for the  second serial
	// number strings are not required to implement  write access for this object.
	// Not every physical component will have a serial number, or even need one.
	// Physical entities for which the associated value of the entPhysicalIsFRU
	// object is equal to 'false(2)' (e.g., the repeater ports within a repeater
	// module), do not need their own unique serial number. An agent does not have
	// to provide write access for such entities, and may return a zero-length
	// string.  If write access is implemented for an instance of
	// 'ceEntPhysicalSecondSerialNum', and a value is written into  the instance,
	// the agent must retain the supplied value in the
	// 'ceEntPhysicalSecondSerialNum' instance associated with the  same physical
	// entity for as long as that entity remains instantiated. This includes
	// instantiations across all re- initializations/reboots of the network
	// management system, including those which result in a change of the physical
	// entity's entPhysicalIndex value. The type is string with length: 0..32.
	CeEntPhysicalSecondSerialNum interface{}
}

ENTITYMIB_EntPhysicalTable_EntPhysicalEntry Information about a particular physical entity.

Each entry provides objects (entPhysicalDescr, entPhysicalVendorType, and entPhysicalClass) to help an NMS identify and characterize the entry, and objects (entPhysicalContainedIn and entPhysicalParentRelPos) to help an NMS relate the particular entry to other entries in this table.

func (*ENTITYMIB_EntPhysicalTable_EntPhysicalEntry) GetEntityData 

func (entPhysicalEntry *ENTITYMIB_EntPhysicalTable_EntPhysicalEntry) GetEntityData() *types.CommonEntityData

type ENTITYMIB_EntityGeneral 

type ENTITYMIB_EntityGeneral struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter

	// The value of sysUpTime at the time a conceptual row is created, modified,
	// or deleted in any of these tables:         - entPhysicalTable         -
	// entLogicalTable         - entLPMappingTable         - entAliasMappingTable
	// - entPhysicalContainsTable. The type is interface{} with range:
	// 0..4294967295.
	EntLastChangeTime interface{}
}

ENTITYMIB_EntityGeneral

func (*ENTITYMIB_EntityGeneral) GetEntityData 

func (entityGeneral *ENTITYMIB_EntityGeneral) GetEntityData() *types.CommonEntityData

type PhysicalClass 

type PhysicalClass string

PhysicalClass represents class is some sort of central processing unit. 

const (
	PhysicalClass_other PhysicalClass = "other"

	PhysicalClass_unknown PhysicalClass = "unknown"

	PhysicalClass_chassis PhysicalClass = "chassis"

	PhysicalClass_backplane PhysicalClass = "backplane"

	PhysicalClass_container PhysicalClass = "container"

	PhysicalClass_powerSupply PhysicalClass = "powerSupply"

	PhysicalClass_fan PhysicalClass = "fan"

	PhysicalClass_sensor PhysicalClass = "sensor"

	PhysicalClass_module PhysicalClass = "module"

	PhysicalClass_port PhysicalClass = "port"

	PhysicalClass_stack PhysicalClass = "stack"

	PhysicalClass_cpu PhysicalClass = "cpu"
)

Source Files

View all Source files

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL
go.dev uses cookies from Google to deliver and enhance the quality of its services and to analyze traffic. Learn more.