docs_submgt3_mib

package
v0.0.0-...-fac1166 Latest Latest
Warning

This package is not in the latest version of its module.

 Go to latest Published: Oct 17, 2019 License: Apache-2.0 Imports: 6 Imported by: 0

Documentation

Overview

This MIB module contains the management objects for the CMTS control of the IP4 and IPv6 traffic with origin and destination to CMs and/or CPEs behind the CM.

Index

Constants

This section is empty.

Variables

This section is empty.

Functions

This section is empty.

Types

type DOCSSUBMGT3MIB 

type DOCSSUBMGT3MIB struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter

	DocsSubmgt3Base DOCSSUBMGT3MIB_DocsSubmgt3Base

	// This object maintains per-CM traffic policies enforced  by the CMTS. The
	// CMTS acquires the CM traffic policies  through the CM registration process,
	// or in the  absence of some or all of those parameters, from the  Base
	// object. The CM information and controls are meaningful  and used by the
	// CMTS, but only after the CM is  operational.
	DocsSubmgt3CpeCtrlTable DOCSSUBMGT3MIB_DocsSubmgt3CpeCtrlTable

	// This object defines the list of IP Addresses behind  the CM known by the
	// CMTS.   If the Active attribute of the CpeCtrl object associated  with a CM
	// is set to 'true' and the CMTS receives an  IP packet from a CM that
	// contains a source IP address that  does not match one of the CPE IP
	// addresses associated  with this CM, one of two things occurs. If the number
	// of CPE IPs is less than the MaxCpeIp of the CpeCtrl object  for that CM,
	// the source IP address is added to this  object and the packet is forwarded;
	// otherwise, the  packet is dropped.
	DocsSubmgt3CpeIpTable DOCSSUBMGT3MIB_DocsSubmgt3CpeIpTable

	// This object defines the set of downstream and upstream  filter groups that
	// the CMTS applies to traffic associated  with that CM.
	DocsSubmgt3GrpTable DOCSSUBMGT3MIB_DocsSubmgt3GrpTable

	// This object describes a set of filter or classifier  criteria. Classifiers
	// are assigned by group to the  individual CMs. That assignment is made via
	// the 'Subscriber  Management TLVs' encodings sent upstream from  the CM to
	// the CMTS during registration or in their  absence, default values
	// configured in the CMTS.  A Filter Group ID (GrpId) is a set of rules that
	// correspond  to the expansion of a UDC Group ID into UDC individual
	// classification rules.  The Filter Group Ids are generated   whenever the
	// CMTS is configured to send UDCs during the CM   registration process.
	// Implementation of L2 classification   criteria is optional for the CMTS;
	// LLC/MAC upstream and   downstream filter criteria can be ignored during the
	// packet  matching process.
	DocsSubmgt3FilterGrpTable DOCSSUBMGT3MIB_DocsSubmgt3FilterGrpTable
}

DOCSSUBMGT3MIB

func (*DOCSSUBMGT3MIB) GetEntityData 

func (dOCSSUBMGT3MIB *DOCSSUBMGT3MIB) GetEntityData() *types.CommonEntityData

type DOCSSUBMGT3MIB_DocsSubmgt3Base 

type DOCSSUBMGT3MIB_DocsSubmgt3Base struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter

	// This attribute represents the maximum number of IPv4   Addresses allowed
	// for the CM's CPEs if not signaled in the   registration process. The type
	// is interface{} with range: 0..1023.
	DocsSubmgt3BaseCpeMaxIpv4Def interface{}

	// This attribute represents the maximum number of IPv6   prefixes allowed for
	// the CM's CPEs if not signaled in  the registration process. The type is
	// interface{} with range: 0..1023.
	DocsSubmgt3BaseCpeMaxIpv6PrefixDef interface{}

	// This attribute represents the default value for enabling  Subscriber
	// Management filters and controls  in the CM if the parameter is not signaled
	// in the DOCSIS  Registration process. The type is bool.
	DocsSubmgt3BaseCpeActiveDef interface{}

	// This attribute represents the default value for enabling  the CPE learning
	// process for the CM if the parameter  is not signaled in the DOCSIS
	// Registration process. The type is bool.
	DocsSubmgt3BaseCpeLearnableDef interface{}

	// This attribute represents the default value for the  subscriber (CPE)
	// downstream filter group for the  CM if the parameter is not signaled in the
	// DOCSIS Registration  process. The type is interface{} with range: 0..1024.
	DocsSubmgt3BaseSubFilterDownDef interface{}

	// This attribute represents the default value for the  subscriber (CPE)
	// upstream filter group for the CM  if the parameter is not signaled in the
	// DOCSIS Registration  process. The type is interface{} with range: 0..1024.
	DocsSubmgt3BaseSubFilterUpDef interface{}

	// This attribute represents the default value for the  CM stack downstream
	// filter group applying to the CM  if the parameter is not signaled in the
	// DOCSIS Registration  process. The type is interface{} with range: 0..1024.
	DocsSubmgt3BaseCmFilterDownDef interface{}

	// This attribute represents the default value for the  CM stack upstream
	// filter group applying to the CM if  the parameter is not signaled in the
	// DOCSIS Registration  process. The type is interface{} with range: 0..1024.
	DocsSubmgt3BaseCmFilterUpDef interface{}

	// This attribute represents the default value for the  PS or eRouter
	// downstream filter group for the CM if  the parameter is not signaled in the
	// DOCSIS Registration  process. The type is interface{} with range: 0..1024.
	DocsSubmgt3BasePsFilterDownDef interface{}

	// This attribute represents the default value for the  PS or eRouter upstream
	// filter group for the CM if the  parameter is not signaled in the DOCSIS
	// Registration  process. The type is interface{} with range: 0..1024.
	DocsSubmgt3BasePsFilterUpDef interface{}

	// This attribute represents the default value for the  MTA downstream filter
	// group for the CM if the parameter  is not signaled in the DOCSIS
	// Registration process. The type is interface{} with range: 0..1024.
	DocsSubmgt3BaseMtaFilterDownDef interface{}

	// This attribute represents the default value for the  MTA upstream filter
	// group for the CM if the parameter  is not signaled in the DOCSIS
	// Registration process. The type is interface{} with range: 0..1024.
	DocsSubmgt3BaseMtaFilterUpDef interface{}

	// This attribute represents the default value for the  STB downstream filter
	// group for the CM if the parameter  is not signaled in the DOCSIS
	// Registration process. The type is interface{} with range: 0..1024.
	DocsSubmgt3BaseStbFilterDownDef interface{}

	// This attribute represents the default value for the  STB upstream filter
	// group for the CM if the parameter  is not signaled in the DOCSIS
	// Registration process. The type is interface{} with range: 0..1024.
	DocsSubmgt3BaseStbFilterUpDef interface{}
}

DOCSSUBMGT3MIB_DocsSubmgt3Base

func (*DOCSSUBMGT3MIB_DocsSubmgt3Base) GetEntityData 

func (docsSubmgt3Base *DOCSSUBMGT3MIB_DocsSubmgt3Base) GetEntityData() *types.CommonEntityData

type DOCSSUBMGT3MIB_DocsSubmgt3CpeCtrlTable 

type DOCSSUBMGT3MIB_DocsSubmgt3CpeCtrlTable struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter

	// The conceptual row of docsSubmgt3CpeCtrlTable.  The CMTS does not persist
	// the instances of the CpeCtrl  object across reinitializations. The type is
	// slice of DOCSSUBMGT3MIB_DocsSubmgt3CpeCtrlTable_DocsSubmgt3CpeCtrlEntry.
	DocsSubmgt3CpeCtrlEntry []*DOCSSUBMGT3MIB_DocsSubmgt3CpeCtrlTable_DocsSubmgt3CpeCtrlEntry
}

DOCSSUBMGT3MIB_DocsSubmgt3CpeCtrlTable This object maintains per-CM traffic policies enforced by the CMTS. The CMTS acquires the CM traffic policies through the CM registration process, or in the absence of some or all of those parameters, from the Base object. The CM information and controls are meaningful and used by the CMTS, but only after the CM is operational.

func (*DOCSSUBMGT3MIB_DocsSubmgt3CpeCtrlTable) GetEntityData 

func (docsSubmgt3CpeCtrlTable *DOCSSUBMGT3MIB_DocsSubmgt3CpeCtrlTable) GetEntityData() *types.CommonEntityData

type DOCSSUBMGT3MIB_DocsSubmgt3CpeCtrlTable_DocsSubmgt3CpeCtrlEntry 

type DOCSSUBMGT3MIB_DocsSubmgt3CpeCtrlTable_DocsSubmgt3CpeCtrlEntry struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter
	YListKey   string

	// This attribute is a key. The type is string with range: 1..4294967295.
	// Refers to
	// docs_if3_mib.DOCSIF3MIB_DocsIf3CmtsCmRegStatusTable_DocsIf3CmtsCmRegStatusEntry_DocsIf3CmtsCmRegStatusId
	DocsIf3CmtsCmRegStatusId interface{}

	// This attribute represents the number of simultaneous  IP v4 addresses
	// permitted for CPE connected to the CM.  When the MaxCpeIpv4 attribute is
	// set to zero (0), all Ipv4 CPE  traffic from the CM is dropped. The CMTS
	// configures this  attribute with whichever of the 'Subscriber Management CPE
	// IPv4  List' or 'Subscriber Management Control-Max_CpeIPv4' signaled
	// encodings is greater, or in the absence of all of those  provisioning
	// parameters, with the CpeMaxIp v4Def  from the Base object. This limit
	// applies to learned  and DOCSIS-provisioned entries but not to entries added
	// through some administrative process at the CMTS.  Note that this attribute
	// is only meaningful when the  Active attribute of the CM is set to 'true'.
	// The type is interface{} with range: 0..1023.
	DocsSubmgt3CpeCtrlMaxCpeIpv4 interface{}

	// This attribute represents the number of simultaneous  IPv6 prefixes
	// permitted for CPE connected to the  CM.   When the MaxCpeIpv6Prefix is set
	// to zero (0), all IPv6 CPE   traffic from the CM is dropped. The CMTS
	// configures this   attribute with whichever of the 'Subscriber Management
	// CPE IPv6 List'   or'Subscriber Management Control Max Cpe IPv6 Prefix'
	// signaled encodings is greater, or in the absence of all of those
	// provisioning parameters, with the CpeMaxIpv6PrefixDef  from the Base
	// object. This limit applies to learned  and DOCSIS-provisioned entries but
	// not to entries added  through some administrative process at the CMTS.
	// Note that this attribute is only meaningful when the  Active attribute of
	// the CM is set to 'true'. The type is interface{} with range: 0..1023.
	DocsSubmgt3CpeCtrlMaxCpeIpv6Prefix interface{}

	// This attribute controls the application of subscriber  management to this
	// CM. If this is set to 'true',  CMTS-based CPE control is active, and all
	// the actions  required by the various filter policies and controls  apply at
	// the CMTS. If this is set to false, no subscriber  management filtering is
	// done at the CMTS (but other  filters may apply). If not set through DOCSIS
	// provisioning,  this object defaults to the value of the Active  attribute
	// of the Base object. The type is bool.
	DocsSubmgt3CpeCtrlActive interface{}

	// This attribute controls whether the CMTS may learn  (and pass traffic for)
	// CPE IP addresses associated  with a CM. If this is set to 'true', the CMTS
	// may learn up  to the CM MaxCpeIp value less any DOCSIS-provisioned  entries
	// related to this CM. The nature of the learning  mechanism is not specified
	// here. If not set through  DOCSIS provisioning, this object defaults to the
	// value of the CpeLearnableDef attribute from the Base  object. Note that
	// this attribute is only meaningful  if docsSubMgtCpeControlActive is 'true'
	// to enforce  a limit in the number of CPEs learned. CPE learning  is always
	// performed for the CMTS for security reasons. The type is bool.
	DocsSubmgt3CpeCtrlLearnable interface{}

	// If set to 'true', this attribute commands the CMTS  to delete the instances
	// denoted as 'learned' addresses  in the CpeIp object. This attribute always
	// returns  false on read. The type is bool.
	DocsSubmgt3CpeCtrlReset interface{}

	// This attribute represents the system Up Time of the  last set to 'true' of
	// the Reset attribute of this instance.  Zero if never reset. The type is
	// interface{} with range: 0..4294967295.
	DocsSubmgt3CpeCtrlLastReset interface{}
}

DOCSSUBMGT3MIB_DocsSubmgt3CpeCtrlTable_DocsSubmgt3CpeCtrlEntry The conceptual row of docsSubmgt3CpeCtrlTable. The CMTS does not persist the instances of the CpeCtrl object across reinitializations.

func (*DOCSSUBMGT3MIB_DocsSubmgt3CpeCtrlTable_DocsSubmgt3CpeCtrlEntry) GetEntityData 

func (docsSubmgt3CpeCtrlEntry *DOCSSUBMGT3MIB_DocsSubmgt3CpeCtrlTable_DocsSubmgt3CpeCtrlEntry) GetEntityData() *types.CommonEntityData

type DOCSSUBMGT3MIB_DocsSubmgt3CpeIpTable 

type DOCSSUBMGT3MIB_DocsSubmgt3CpeIpTable struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter

	// The conceptual row of docsSubmgt3CpeIpTable. The type is slice of
	// DOCSSUBMGT3MIB_DocsSubmgt3CpeIpTable_DocsSubmgt3CpeIpEntry.
	DocsSubmgt3CpeIpEntry []*DOCSSUBMGT3MIB_DocsSubmgt3CpeIpTable_DocsSubmgt3CpeIpEntry
}

DOCSSUBMGT3MIB_DocsSubmgt3CpeIpTable This object defines the list of IP Addresses behind the CM known by the CMTS.

If the Active attribute of the CpeCtrl object associated with a CM is set to 'true' and the CMTS receives an IP packet from a CM that contains a source IP address that does not match one of the CPE IP addresses associated with this CM, one of two things occurs. If the number of CPE IPs is less than the MaxCpeIp of the CpeCtrl object for that CM, the source IP address is added to this object and the packet is forwarded; otherwise, the packet is dropped.

func (*DOCSSUBMGT3MIB_DocsSubmgt3CpeIpTable) GetEntityData 

func (docsSubmgt3CpeIpTable *DOCSSUBMGT3MIB_DocsSubmgt3CpeIpTable) GetEntityData() *types.CommonEntityData

type DOCSSUBMGT3MIB_DocsSubmgt3CpeIpTable_DocsSubmgt3CpeIpEntry 

type DOCSSUBMGT3MIB_DocsSubmgt3CpeIpTable_DocsSubmgt3CpeIpEntry struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter
	YListKey   string

	// This attribute is a key. The type is string with range: 1..4294967295.
	// Refers to
	// docs_if3_mib.DOCSIF3MIB_DocsIf3CmtsCmRegStatusTable_DocsIf3CmtsCmRegStatusEntry_DocsIf3CmtsCmRegStatusId
	DocsIf3CmtsCmRegStatusId interface{}

	// This attribute is a key. This attribute represents a unique identifier for
	// a CPE IP of the CM. An instance of this attribute exists  for each CPE
	// provisioned in the 'Subscriber Management  CPE IPv4 Table' or 'Subscriber
	// Management CPE  IPv6 Table' encodings. An entry is created either through
	// the included CPE IP addresses in the provisioning  object, or CPEs learned
	// from traffic sourced from the  CM. The type is interface{} with range:
	// 1..1023.
	DocsSubmgt3CpeIpId interface{}

	// The type of Internet address of the Addr attribute. The type is
	// InetAddressType.
	DocsSubmgt3CpeIpAddrType interface{}

	// This attribute represents the IP address either set  from provisioning or
	// learned via address gleaning  or other forwarding means. The type is string
	// with length: 0..255.
	DocsSubmgt3CpeIpAddr interface{}

	// This attribute represents the prefix length associated with  the IP subnet
	// prefix either set from provisioning or learned  via address gleaning or
	// other forwarding means. For IPv4 CPE  addresses this attribute generally
	// reports the value 32   (32 bits) to indicate a unicast IPv4 address. For
	// IPv6, this  attribute represents either an IPv6 unicast address  (128 bits,
	// equal to /128 prefix length) or a subnet prefix   length (for example 56
	// bits, equal to /56 prefix length). The type is interface{} with range:
	// 0..2040.
	DocsSubmgt3CpeIpAddrPrefixLen interface{}

	// This attribute is set to 'true' when the IP address  was learned from IP
	// packets sent upstream rather than  via the CM provisioning process. The
	// type is bool.
	DocsSubmgt3CpeIpLearned interface{}

	// This attribute represents the type of CPE based on  the following
	// classification below:               'cpe' Regular CPE clients.
	// 'ps'  CableHome Portal Server (PS)               'mta' PacketCable
	// Multimedia Terminal Adapter (MTA)               'stb' Digital Set-top Box
	// (STB).               'tea' T1 Emulation adapter (TEA)
	// 'erouter' Embedded Router (eRouter). The type is DocsSubmgt3CpeIpType.
	DocsSubmgt3CpeIpType interface{}
}

DOCSSUBMGT3MIB_DocsSubmgt3CpeIpTable_DocsSubmgt3CpeIpEntry The conceptual row of docsSubmgt3CpeIpTable.

func (*DOCSSUBMGT3MIB_DocsSubmgt3CpeIpTable_DocsSubmgt3CpeIpEntry) GetEntityData 

func (docsSubmgt3CpeIpEntry *DOCSSUBMGT3MIB_DocsSubmgt3CpeIpTable_DocsSubmgt3CpeIpEntry) GetEntityData() *types.CommonEntityData

type DOCSSUBMGT3MIB_DocsSubmgt3CpeIpTable_DocsSubmgt3CpeIpEntry_DocsSubmgt3CpeIpType 

type DOCSSUBMGT3MIB_DocsSubmgt3CpeIpTable_DocsSubmgt3CpeIpEntry_DocsSubmgt3CpeIpType string

DOCSSUBMGT3MIB_DocsSubmgt3CpeIpTable_DocsSubmgt3CpeIpEntry_DocsSubmgt3CpeIpType represents 'erouter' Embedded Router (eRouter) 

const (
	DOCSSUBMGT3MIB_DocsSubmgt3CpeIpTable_DocsSubmgt3CpeIpEntry_DocsSubmgt3CpeIpType_cpe DOCSSUBMGT3MIB_DocsSubmgt3CpeIpTable_DocsSubmgt3CpeIpEntry_DocsSubmgt3CpeIpType = "cpe"

	DOCSSUBMGT3MIB_DocsSubmgt3CpeIpTable_DocsSubmgt3CpeIpEntry_DocsSubmgt3CpeIpType_ps DOCSSUBMGT3MIB_DocsSubmgt3CpeIpTable_DocsSubmgt3CpeIpEntry_DocsSubmgt3CpeIpType = "ps"

	DOCSSUBMGT3MIB_DocsSubmgt3CpeIpTable_DocsSubmgt3CpeIpEntry_DocsSubmgt3CpeIpType_mta DOCSSUBMGT3MIB_DocsSubmgt3CpeIpTable_DocsSubmgt3CpeIpEntry_DocsSubmgt3CpeIpType = "mta"

	DOCSSUBMGT3MIB_DocsSubmgt3CpeIpTable_DocsSubmgt3CpeIpEntry_DocsSubmgt3CpeIpType_stb DOCSSUBMGT3MIB_DocsSubmgt3CpeIpTable_DocsSubmgt3CpeIpEntry_DocsSubmgt3CpeIpType = "stb"

	DOCSSUBMGT3MIB_DocsSubmgt3CpeIpTable_DocsSubmgt3CpeIpEntry_DocsSubmgt3CpeIpType_tea DOCSSUBMGT3MIB_DocsSubmgt3CpeIpTable_DocsSubmgt3CpeIpEntry_DocsSubmgt3CpeIpType = "tea"

	DOCSSUBMGT3MIB_DocsSubmgt3CpeIpTable_DocsSubmgt3CpeIpEntry_DocsSubmgt3CpeIpType_erouter DOCSSUBMGT3MIB_DocsSubmgt3CpeIpTable_DocsSubmgt3CpeIpEntry_DocsSubmgt3CpeIpType = "erouter"
)

type DOCSSUBMGT3MIB_DocsSubmgt3FilterGrpTable 

type DOCSSUBMGT3MIB_DocsSubmgt3FilterGrpTable struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter

	// The conceptual row of docsSubmgt3FilterGrpTable.  The CMTS persists all
	// instances of the FilterGrp object  across reinitializations. The type is
	// slice of
	// DOCSSUBMGT3MIB_DocsSubmgt3FilterGrpTable_DocsSubmgt3FilterGrpEntry.
	DocsSubmgt3FilterGrpEntry []*DOCSSUBMGT3MIB_DocsSubmgt3FilterGrpTable_DocsSubmgt3FilterGrpEntry
}

DOCSSUBMGT3MIB_DocsSubmgt3FilterGrpTable This object describes a set of filter or classifier criteria. Classifiers are assigned by group to the individual CMs. That assignment is made via the 'Subscriber Management TLVs' encodings sent upstream from the CM to the CMTS during registration or in their absence, default values configured in the CMTS. A Filter Group ID (GrpId) is a set of rules that correspond to the expansion of a UDC Group ID into UDC individual classification rules. The Filter Group Ids are generated whenever the CMTS is configured to send UDCs during the CM registration process. Implementation of L2 classification criteria is optional for the CMTS; LLC/MAC upstream and downstream filter criteria can be ignored during the packet matching process.

func (*DOCSSUBMGT3MIB_DocsSubmgt3FilterGrpTable) GetEntityData 

func (docsSubmgt3FilterGrpTable *DOCSSUBMGT3MIB_DocsSubmgt3FilterGrpTable) GetEntityData() *types.CommonEntityData

type DOCSSUBMGT3MIB_DocsSubmgt3FilterGrpTable_DocsSubmgt3FilterGrpEntry 

type DOCSSUBMGT3MIB_DocsSubmgt3FilterGrpTable_DocsSubmgt3FilterGrpEntry struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter
	YListKey   string

	// This attribute is a key. This key is an identifier for a set of classifiers
	// known  as a filter group. Each CM may be associated with  several filter
	// groups for its upstream and downstream  traffic, one group per target end
	// point on the CM as  defined in the Grp object. Typically, many CMs share  a
	// common set of filter groups. The type is interface{} with range: 1..65535.
	DocsSubmgt3FilterGrpGrpId interface{}

	// This attribute is a key. This key represents an ordered classifier
	// identifier  within the group.  Filters are applied in order if  the
	// Priority attribute is not supported. The type is interface{} with range:
	// 1..65535.
	DocsSubmgt3FilterGrpRuleId interface{}

	// This attribute represents the action to take upon  this filter matching.
	// 'permit' means to stop the classification  matching and accept the packet
	// for further  processing.  'deny' means to drop the packet. The type is
	// DocsSubmgt3FilterGrpAction.
	DocsSubmgt3FilterGrpAction interface{}

	// This attribute defines the order in which classifiers  are compared against
	// packets. The higher the value,  the higher the priority. The type is
	// interface{} with range: 0..65535.
	DocsSubmgt3FilterGrpPriority interface{}

	// This attribute represents the low value of a range  of ToS (Type of
	// Service) octet values. This object is  defined as an 8-bit octet as per the
	// DOCSIS Specification  for packet classification.  The IP ToS octet, as
	// originally defined in RFC 791, has  been superseded by the 6-bit
	// Differentiated Services  Field (DSField, RFC 3260) and the 2-bit Explicit
	// Congestion Notification Field (ECN field, RFC 3168). The type is string
	// with length: 1..1.
	DocsSubmgt3FilterGrpIpTosLow interface{}

	// This attribute represents the high value of a range  of ToS octet values.
	// This object is defined as an 8-bit  octet as per the DOCSIS Specification
	// for packet classification.  The IP ToS octet, as originally defined in RFC
	// 791, has  been superseded by the 6-bit Differentiated Services  Field
	// (DSField, RFC 3260) and the 2-bit Explicit  Congestion Notification Field
	// (ECN field, RFC 3168). The type is string with length: 1..1.
	DocsSubmgt3FilterGrpIpTosHigh interface{}

	// This attribute represents the mask value that is bitwise  ANDed with ToS
	// octet in an IP packet, and the resulting value  is used for range checking
	// of IpTosLow and IpTosHigh. The type is string with length: 1..1.
	DocsSubmgt3FilterGrpIpTosMask interface{}

	// This attribute represents the value of the IP Protocol  field required for
	// IP packets to match this rule.  The value 256 matches traffic with any IP
	// Protocol value.  The value 257 by convention matches both TCP and  UDP. The
	// type is interface{} with range: 0..257.
	DocsSubmgt3FilterGrpIpProtocol interface{}

	// The type of the Internet address for InetSrcAddr,  InetSrcMask,
	// InetDestAddr, and InetDestMask. The type is InetAddressType.
	DocsSubmgt3FilterGrpInetAddrType interface{}

	// This attribute specifies the value of the IP Source Address  required for
	// packets to match this rule. An IP packet  matches the rule when the
	// packet's IP Source Address  bitwise ANDed with the InetSrcMask value equals
	// the InetSrcAddr value. The address type of this object  is specified by the
	// InetAddressType attribute. The type is string with length: 0..255.
	DocsSubmgt3FilterGrpInetSrcAddr interface{}

	// This attribute represents which bits of a packet's  IP Source Address are
	// compared to match this rule. An  IP packet matches the rule when the
	// packet's IP Source  Address bitwise ANDed with the InetSrcMask value equals
	// the InetSrcAddr value. The address type of this  object is specified by
	// InetAddrType. The type is string with length: 0..255.
	DocsSubmgt3FilterGrpInetSrcMask interface{}

	// This attribute specifies the value of the IP Destination  Address required
	// for packets to match this rule.  An IP packet matches the rule when the
	// packet's IP Destination  Address bitwise ANDed with the InetSrcMask  value
	// equals the InetDestAddr value. The address type  of this object is
	// specified by the InetAddrType attribute. The type is string with length:
	// 0..255.
	DocsSubmgt3FilterGrpInetDestAddr interface{}

	// This attribute represents which bits of a packet's  IP Destination Address
	// are compared to match this rule.  An IP packet matches the rule when the
	// packet's IP Destination  Address bitwise ANDed with the InetDestMask value
	// equals the InetDestAddr value. The address type  of this object is
	// specified by InetAddrType. The type is string with length: 0..255.
	DocsSubmgt3FilterGrpInetDestMask interface{}

	// This attribute represents the low-end inclusive  range of TCP/UDP source
	// port numbers to which a packet  is compared. This attribute is irrelevant
	// for non-TCP/UDP  IP packets. The type is interface{} with range: 0..65535.
	DocsSubmgt3FilterGrpSrcPortStart interface{}

	// This attribute represents the high-end inclusive  range of TCP/UDP source
	// port numbers to which a packet  is compared. This attribute is irrelevant
	// for non-TCP/UDP  IP packets. The type is interface{} with range: 0..65535.
	DocsSubmgt3FilterGrpSrcPortEnd interface{}

	// This attribute represents the low-end inclusive  range of TCP/UDP
	// destination port numbers to which a  packet is compared. This attribute is
	// irrelevant for  non-TCP/UDP IP packets. The type is interface{} with range:
	// 0..65535.
	DocsSubmgt3FilterGrpDestPortStart interface{}

	// This attribute represents the high-end inclusive  range of TCP/UDP
	// destination port numbers to which a packet  is compared. This attribute is
	// irrelevant for non-TCP/UDP  IP packets. The type is interface{} with range:
	// 0..65535.
	DocsSubmgt3FilterGrpDestPortEnd interface{}

	// This attribute represents the criteria to match against  an Ethernet packet
	// MAC address bitwise ANDed  with DestMacMask. The type is string with
	// pattern: [0-9a-fA-F]{2}(:[0-9a-fA-F]{2}){5}.
	DocsSubmgt3FilterGrpDestMacAddr interface{}

	// An Ethernet packet matches an entry when its  destination MAC address
	// bitwise ANDed with  the DestMacMask attribute equals the value of  the
	// DestMacAddr attribute. The type is string with pattern:
	// [0-9a-fA-F]{2}(:[0-9a-fA-F]{2}){5}.
	DocsSubmgt3FilterGrpDestMacMask interface{}

	// This attribute represents the value to match against  an Ethernet packet
	// source MAC address. The type is string with pattern:
	// [0-9a-fA-F]{2}(:[0-9a-fA-F]{2}){5}.
	DocsSubmgt3FilterGrpSrcMacAddr interface{}

	// This attribute indicates the format of the layer 3  protocol ID in the
	// Ethernet packet. A value of 'none'  means that the rule does not use the
	// layer 3 protocol  type as a matching criteria. A value of 'ethertype'
	// means that the rule applies only to frames that contain  an EtherType
	// value. EtherType values are contained  in packets using the DEC-Intel-Xerox
	// (DIX) encapsulation  or the RFC 1042 Sub-Network Access Protocol  (SNAP)
	// encapsulation formats. A value of 'dsap' means  that the rule applies only
	// to frames using the IEEE802.3  encapsulation format with a Destination
	// Service  Access Point (DSAP) other than 0xAA (which is reserved  for SNAP).
	// A value of 'mac' means that the rule  applies only to MAC management
	// messages for MAC management  messages. A value of 'all' means that the rule
	// matches all Ethernet packets. If the Ethernet frame  contains an 802.1P/Q
	// Tag header (i.e., EtherType  0x8100), this attribute applies to the
	// embedded EtherType  field within the 802.1p/Q header.  The value 'mac' is
	// only used for passing UDCs to CMs during   Registration. The CMTS ignores
	// filter rules that include   the value of this attribute set to 'mac' for
	// CMTS enforced   upstream and downstream subscriber management filter group
	// rules. The type is DocsSubmgt3FilterGrpEnetProtocolType.
	DocsSubmgt3FilterGrpEnetProtocolType interface{}

	// This attribute represents the Ethernet protocol  type to be matched against
	// the packets. For EnetProtocolType  set to 'none', this attribute is ignored
	// when considering  whether a packet matches the current rule.  If the
	// attribute EnetProtocolType is 'ethertype',  this attribute gives the 16-bit
	// value of the EtherType  that the packet must match in order to match the
	// rule.  If the attribute EnetProtocolType is 'dsap', the lower  8 bits of
	// this attribute's value must match the DSAP  octet of the packet in order to
	// match the rule. If the Ethernet  frame contains an 802.1p/Q Tag header
	// (i.e.,  EtherType 0x8100), this attribute applies to the embedded
	// EtherType field within the 802.1p/Q header. The type is interface{} with
	// range: 0..65535.
	DocsSubmgt3FilterGrpEnetProtocol interface{}

	// This attribute applies only to Ethernet frames using  the 802.1p/Q tag
	// header (indicated with EtherType  0x8100). Such frames include a 16-bit Tag
	// that contains  a 3-bit Priority field and a 12-bit VLAN number.  Tagged
	// Ethernet packets must have a 3-bit Priority  field within the range of
	// PriLow to PriHigh in order to  match this rule. The type is interface{}
	// with range: 0..7.
	DocsSubmgt3FilterGrpUserPriLow interface{}

	// This attribute applies only to Ethernet frames using  the 802.1p/Q tag
	// header (indicated with EtherType  0x8100). Such frames include a 16-bit Tag
	// that contains  a 3-bit Priority field and a 12-bit VLAN number.  Tagged
	// Ethernet packets must have a 3-bit Priority  field within the range of
	// PriLow to PriHigh in order to  match this rule. The type is interface{}
	// with range: 0..7.
	DocsSubmgt3FilterGrpUserPriHigh interface{}

	// This attribute applies only to Ethernet frames using  the 802.1p/Q tag
	// header. Tagged packets must have  a VLAN Identifier that matches the value
	// in order to  match the rule. The type is interface{} with range: 0..4094.
	DocsSubmgt3FilterGrpVlanId interface{}

	// This attribute counts the number of packets  that have been classified
	// (matched) using this rule  entry. This includes all packets delivered to a
	// Service  Flow maximum rate policing function, whether  or not that function
	// drops the packets. Discontinuities  in the value of this counter can occur
	// at re-initialization  of the managed system, and at other times  as
	// indicated by the value of ifCounterDiscontinuityTime  for the CM MAC Domain
	// interface. The type is interface{} with range: 0..18446744073709551615.
	DocsSubmgt3FilterGrpClassPkts interface{}

	// This attribute represents the Flow Label field in  the IPv6 header to be
	// matched by the classifier.  The value zero indicates that the Flow Label is
	// not specified  as part of the classifier and is not matched against
	// packets. The type is interface{} with range: 0..1048575.
	DocsSubmgt3FilterGrpFlowLabel interface{}

	// This attribute represents a bit-mask of the CM in-bound  interfaces to
	// which this classifier applies.  This attribute only applies to upstream
	// Drop Classifiers   being sent to CMs during the registration process. The
	// type is map[string]bool.
	DocsSubmgt3FilterGrpCmInterfaceMask interface{}

	// The conceptual row status of this object. The type is RowStatus.
	DocsSubmgt3FilterGrpRowStatus interface{}
}

DOCSSUBMGT3MIB_DocsSubmgt3FilterGrpTable_DocsSubmgt3FilterGrpEntry The conceptual row of docsSubmgt3FilterGrpTable. The CMTS persists all instances of the FilterGrp object across reinitializations.

func (*DOCSSUBMGT3MIB_DocsSubmgt3FilterGrpTable_DocsSubmgt3FilterGrpEntry) GetEntityData 

func (docsSubmgt3FilterGrpEntry *DOCSSUBMGT3MIB_DocsSubmgt3FilterGrpTable_DocsSubmgt3FilterGrpEntry) GetEntityData() *types.CommonEntityData

type DOCSSUBMGT3MIB_DocsSubmgt3FilterGrpTable_DocsSubmgt3FilterGrpEntry_DocsSubmgt3FilterGrpAction 

type DOCSSUBMGT3MIB_DocsSubmgt3FilterGrpTable_DocsSubmgt3FilterGrpEntry_DocsSubmgt3FilterGrpAction string

DOCSSUBMGT3MIB_DocsSubmgt3FilterGrpTable_DocsSubmgt3FilterGrpEntry_DocsSubmgt3FilterGrpAction represents processing. 'deny' means to drop the packet. 

const (
	DOCSSUBMGT3MIB_DocsSubmgt3FilterGrpTable_DocsSubmgt3FilterGrpEntry_DocsSubmgt3FilterGrpAction_permit DOCSSUBMGT3MIB_DocsSubmgt3FilterGrpTable_DocsSubmgt3FilterGrpEntry_DocsSubmgt3FilterGrpAction = "permit"

	DOCSSUBMGT3MIB_DocsSubmgt3FilterGrpTable_DocsSubmgt3FilterGrpEntry_DocsSubmgt3FilterGrpAction_deny DOCSSUBMGT3MIB_DocsSubmgt3FilterGrpTable_DocsSubmgt3FilterGrpEntry_DocsSubmgt3FilterGrpAction = "deny"
)

type DOCSSUBMGT3MIB_DocsSubmgt3FilterGrpTable_DocsSubmgt3FilterGrpEntry_DocsSubmgt3FilterGrpEnetProtocolType 

type DOCSSUBMGT3MIB_DocsSubmgt3FilterGrpTable_DocsSubmgt3FilterGrpEntry_DocsSubmgt3FilterGrpEnetProtocolType string

DOCSSUBMGT3MIB_DocsSubmgt3FilterGrpTable_DocsSubmgt3FilterGrpEntry_DocsSubmgt3FilterGrpEnetProtocolType represents rules. 

const (
	DOCSSUBMGT3MIB_DocsSubmgt3FilterGrpTable_DocsSubmgt3FilterGrpEntry_DocsSubmgt3FilterGrpEnetProtocolType_none DOCSSUBMGT3MIB_DocsSubmgt3FilterGrpTable_DocsSubmgt3FilterGrpEntry_DocsSubmgt3FilterGrpEnetProtocolType = "none"

	DOCSSUBMGT3MIB_DocsSubmgt3FilterGrpTable_DocsSubmgt3FilterGrpEntry_DocsSubmgt3FilterGrpEnetProtocolType_ethertype DOCSSUBMGT3MIB_DocsSubmgt3FilterGrpTable_DocsSubmgt3FilterGrpEntry_DocsSubmgt3FilterGrpEnetProtocolType = "ethertype"

	DOCSSUBMGT3MIB_DocsSubmgt3FilterGrpTable_DocsSubmgt3FilterGrpEntry_DocsSubmgt3FilterGrpEnetProtocolType_dsap DOCSSUBMGT3MIB_DocsSubmgt3FilterGrpTable_DocsSubmgt3FilterGrpEntry_DocsSubmgt3FilterGrpEnetProtocolType = "dsap"

	DOCSSUBMGT3MIB_DocsSubmgt3FilterGrpTable_DocsSubmgt3FilterGrpEntry_DocsSubmgt3FilterGrpEnetProtocolType_mac DOCSSUBMGT3MIB_DocsSubmgt3FilterGrpTable_DocsSubmgt3FilterGrpEntry_DocsSubmgt3FilterGrpEnetProtocolType = "mac"

	DOCSSUBMGT3MIB_DocsSubmgt3FilterGrpTable_DocsSubmgt3FilterGrpEntry_DocsSubmgt3FilterGrpEnetProtocolType_all DOCSSUBMGT3MIB_DocsSubmgt3FilterGrpTable_DocsSubmgt3FilterGrpEntry_DocsSubmgt3FilterGrpEnetProtocolType = "all"
)

type DOCSSUBMGT3MIB_DocsSubmgt3GrpTable 

type DOCSSUBMGT3MIB_DocsSubmgt3GrpTable struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter

	// The conceptual row of docsSubmgt3GrpTable.  The CMTS does not persist the
	// instances of the Grp  object across reinitializations. The type is slice of
	// DOCSSUBMGT3MIB_DocsSubmgt3GrpTable_DocsSubmgt3GrpEntry.
	DocsSubmgt3GrpEntry []*DOCSSUBMGT3MIB_DocsSubmgt3GrpTable_DocsSubmgt3GrpEntry
}

DOCSSUBMGT3MIB_DocsSubmgt3GrpTable This object defines the set of downstream and upstream filter groups that the CMTS applies to traffic associated with that CM.

func (*DOCSSUBMGT3MIB_DocsSubmgt3GrpTable) GetEntityData 

func (docsSubmgt3GrpTable *DOCSSUBMGT3MIB_DocsSubmgt3GrpTable) GetEntityData() *types.CommonEntityData

type DOCSSUBMGT3MIB_DocsSubmgt3GrpTable_DocsSubmgt3GrpEntry 

type DOCSSUBMGT3MIB_DocsSubmgt3GrpTable_DocsSubmgt3GrpEntry struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter
	YListKey   string

	// This attribute is a key. The type is string with range: 1..4294967295.
	// Refers to
	// docs_if3_mib.DOCSIF3MIB_DocsIf3CmtsCmRegStatusTable_DocsIf3CmtsCmRegStatusEntry_DocsIf3CmtsCmRegStatusId
	DocsIf3CmtsCmRegStatusId interface{}

	// This attribute represents the filter group(s) associated  with the CM
	// signaled 'Upstream Drop Classifier Group ID'   encodings during the
	// registration process. UDC Group IDs are  integer values and this attribute
	// reports them as decimal   numbers that are space-separated. The zero-length
	// string indicates   that the CM didn't signal UDC Group IDs.   This
	// attribute provides two functions:   - Communicate the CM the configured UDC
	// Group ID(s), irrespective   of the CM being provisioned to filter upstream
	// traffic based   on IP Filters or UDCs.   - Optionally, and with regards to
	// the CMTS, if the value of the  attribute UdcSentInReqRsp is 'true',
	// indicates that the filtering   rules associated with the Subscriber
	// Management Group ID(s) will  be sent during registration to the CM. It is
	// vendor specific   whether the CMTS updates individual CM UDCs after
	// registration  when rules are changed in the Grp object. The type is string.
	DocsSubMgt3GrpUdcGroupIds interface{}

	// This attribute represents the CMTS upstream filtering   status for this CM.
	// The value 'true' indicates that the   CMTS has sent UDCs to the CM during
	// registration process.     In order for a CMTS to send UDCs to a CM, the
	// CMTS MAC Domain  needed to be enabled via the MAC Domain attribute
	// SendUdcRulesEnabled and the CM had indicated the UDC capability   support
	// during the registration process. The value 'false'   indicates that the
	// CMTS was not enabled to sent UDCs to the   CMs in the MAC Domain, or the CM
	// does not advertised UDC   support in its capabilities encodings, or both.
	// Since the   CMTS capability to sent UDCs to CMs during the registration
	// process is optional, the CMTS is not required to implement   the value
	// 'true'. The type is bool.
	DocsSubMgt3GrpUdcSentInRegRsp interface{}

	// This attribute represents the filter group applied  to traffic destined for
	// subscriber's CPE attached to the  referenced CM (attached to CM CPE
	// interfaces). This  value corresponds to the 'Subscriber Downstream  Group'
	// value of the 'Subscriber Management Filter Groups'  encoding signaled
	// during the CM registration  or in its absence, to the SubFilterDownDef
	// attribute  of the Base object. The value zero or a filter group  ID not
	// configured in the CMTS means no filtering is applied  to traffic destined
	// to hosts attached to this CM. The type is interface{} with range: 0..1024.
	DocsSubmgt3GrpSubFilterDs interface{}

	// This attribute represents the filter group applied  to traffic originating
	// from subscriber's CPE attached  to the referenced CM (attached to CM CPE
	// interfaces).  This value corresponds to the 'Subscriber Upstream  Group'
	// value of the 'Subscriber Management Filter  Groups' encoding signaled
	// during the CM registration  or in its absence, to the SubFilterUpDef
	// attribute  of the Base object. The value zero or a filter group  ID not
	// configured in the CMTS means no filtering  is applied to traffic
	// originating from hosts attached  to this CM. The type is interface{} with
	// range: 0..1024.
	DocsSubmgt3GrpSubFilterUs interface{}

	// This attribute represents the filter group applied  to traffic destined for
	// the CM itself. This value corresponds  to the 'CM Downstream Group' value
	// of the  'Subscriber Management Filter Groups' encoding signaled  during the
	// CM registration or in its absence,  to the CmFilterDownDef attribute of the
	// Base object.  The value zero or a filter group ID not configured in  the
	// CMTS means no filtering is applied to traffic destined  to the CM. The type
	// is interface{} with range: 0..1024.
	DocsSubmgt3GrpCmFilterDs interface{}

	// This attribute represents the filter group applied  to traffic originating
	// from the CM itself. This value  corresponds to the 'Subscriber Upstream
	// Group'  value of the 'Subscriber Management Filter Groups'  encoding
	// signaled during the CM registration or in its  absence, to the
	// SubFilterUpDef attribute of the Base  object. The value zero or a filter
	// group ID not configured  in the CMTS means no filtering is applied to
	// traffic  originating from this CM. The type is interface{} with range:
	// 0..1024.
	DocsSubmgt3GrpCmFilterUs interface{}

	// This attribute represents the filter group applied  to traffic destined to
	// the Embedded CableHome Portal  Services Element or the Embedded Router on
	// the referenced  CM. This value corresponds to the 'PS Downstream  Group'
	// value of the 'Subscriber Management Filter  Groups' encoding signaled
	// during the CM registration  or in its absence, to the SubFilterDownDef
	// attribute  of the Base object. The value zero or a filter  group ID not
	// configured in the CMTS means no filtering  is applied to traffic destined
	// to the Embedded CableHome  Portal Services Element or Embedded Router on
	// this CM. The type is interface{} with range: 0..1024.
	DocsSubmgt3GrpPsFilterDs interface{}

	// This attribute represents the filter group applied  to traffic originating
	// from the Embedded CableHome  Portal Services Element or Embedded Router on
	// the  referenced CM. This value corresponds to the 'PS Upstream  Group'
	// value of the 'Subscriber Management Filter  Groups' encoding signaled
	// during the CM registration  or in its absence, to the SubFilterUpDef
	// attribute  of the Base object. The value zero or a filter group  ID not
	// configured in the CMTS means no filtering is  applied to traffic
	// originating from the Embedded CableHome  Portal Services Element or
	// Embedded Router  on this CM. The type is interface{} with range: 0..1024.
	DocsSubmgt3GrpPsFilterUs interface{}

	// This attribute represents the filter group applied  to traffic destined to
	// the Embedded Multimedia Terminal  Adapter on the referenced CM. This value
	// corresponds  to the 'MTA Downstream Group' value of the 'Subscriber
	// Management Filter Groups' encoding signaled  during the CM registration or
	// in its absence, to  the SubFilterDownDef attribute of the Base object.  The
	// value zero or a filter group ID not configured in the  CMTS means no
	// filtering is applied to traffic destined  to the Embedded Multimedia
	// Terminal Adapter on  this CM. The type is interface{} with range: 0..1024.
	DocsSubmgt3GrpMtaFilterDs interface{}

	// This attribute represents the filter group applied  to traffic originating
	// from the Embedded Multimedia  Terminal Adapter on the referenced CM. This
	// value  corresponds to the 'MTA Upstream Group' value of the  'Subscriber
	// Management Filter Groups' encoding signaled  during the CM registration or
	// in its absence,  to the SubFilterUpDef attribute of the Base object.  The
	// value zero or a filter group ID not configured in  the CMTS means no
	// filtering is applied to traffic originating  from the Embedded Multimedia
	// Terminal Adapter  on this CM. The type is interface{} with range: 0..1024.
	DocsSubmgt3GrpMtaFilterUs interface{}

	// This attribute represents the filter group applied  to traffic destined for
	// the Embedded Set-Top Box on  the referenced CM. This value corresponds to
	// the 'STB  Downstream Group' value of the 'Subscriber Management  Filter
	// Groups' encoding signaled during the CM  registration or in its absence, to
	// the SubFilterDownDef  attribute of the Base object. The value zero or  a
	// filter group ID not configured in the CMTS means no filtering  is applied
	// to traffic destined to the Embedded  Set-Top Box on this CM. The type is
	// interface{} with range: 0..1024.
	DocsSubmgt3GrpStbFilterDs interface{}

	// This attribute represents the filter group applied  to traffic originating
	// from the Embedded Set-Top  Box on the referenced CM. This value corresponds
	// to the  'STB Upstream Group' value of the 'Subscriber Management  Filter
	// Groups' encoding signaled during the  CM registration or in its absence, to
	// the SubFilterUpDef  attribute of the Base object. The value zero or  a
	// filter group ID not configured in the CMTS means no filtering  is applied
	// to traffic originating from the  Embedded Set-Top Box on this CM. The type
	// is interface{} with range: 0..1024.
	DocsSubmgt3GrpStbFilterUs interface{}
}

DOCSSUBMGT3MIB_DocsSubmgt3GrpTable_DocsSubmgt3GrpEntry The conceptual row of docsSubmgt3GrpTable. The CMTS does not persist the instances of the Grp object across reinitializations.

func (*DOCSSUBMGT3MIB_DocsSubmgt3GrpTable_DocsSubmgt3GrpEntry) GetEntityData 

func (docsSubmgt3GrpEntry *DOCSSUBMGT3MIB_DocsSubmgt3GrpTable_DocsSubmgt3GrpEntry) GetEntityData() *types.CommonEntityData

Source Files

View all Source files

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL
go.dev uses cookies from Google to deliver and enhance the quality of its services and to analyze traffic. Learn more.