cisco_vlan_membership_mib

package
v0.0.0-...-fac1166 Latest Latest
Warning

This package is not in the latest version of its module.

 Go to latest Published: Oct 17, 2019 License: Apache-2.0 Imports: 6 Imported by: 0

Documentation

Overview

The MIB module for the management of the VLAN Membership within the frame work of Cisco VLAN Architecture, v 2.0 by Keith McCloghrie. The MIB provides information on VLAN Membership Policy Servers used by a device and VLAN membership assignments of non-trunk bridge ports of the device.

Index

Constants

This section is empty.

Variables

This section is empty.

Functions

This section is empty.

Types

type CISCOVLANMEMBERSHIPMIB 

type CISCOVLANMEMBERSHIPMIB struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter

	VmVmps CISCOVLANMEMBERSHIPMIB_VmVmps

	VmMembership CISCOVLANMEMBERSHIPMIB_VmMembership

	VmStatistics CISCOVLANMEMBERSHIPMIB_VmStatistics

	VmStatus CISCOVLANMEMBERSHIPMIB_VmStatus

	// A table of VMPS to use. The device will use the the primary VMPS by
	// default. If the device is unable to reach the primary server after
	// vmVmpsRetries retries, it uses the first secondary server in the table
	// until it runs out of secondary servers, in which case it will return to
	// using the primary server. Entries in this table may be created and deleted
	// via this MIB or the management console on a device.
	VmVmpsTable CISCOVLANMEMBERSHIPMIB_VmVmpsTable

	// A summary of VLAN membership of non-trunk bridge ports. This is a
	// convenience table for retrieving VLAN membership information.  A row is
	// created for a VLAN if: a) the VLAN exists, or b) a port is assigned to a
	// non-existent VLAN.  VLAN membership can only be modified via the
	// vmMembershipTable.
	VmMembershipSummaryTable CISCOVLANMEMBERSHIPMIB_VmMembershipSummaryTable

	// A table for configuring VLAN port membership. There is one row for each
	// bridge port that is assigned to a static or dynamic access port. Trunk
	// ports are not  represented in this table.  An entry may be created and
	// deleted when ports are created or deleted via SNMP or the management
	// console on a  device.
	VmMembershipTable CISCOVLANMEMBERSHIPMIB_VmMembershipTable

	// A summary of VLAN membership of non-trunk bridge ports. This table is used
	// for  retrieving VLAN membership information for the device which supports
	// dot1dBasePort  with value greater than 2048.  A row is created for a VLAN
	// and a particular bridge port range, where at least one port  in the range
	// is assigned to this VLAN.  VLAN membership can only be modified via the
	// vmMembershipTable.
	VmMembershipSummaryExtTable CISCOVLANMEMBERSHIPMIB_VmMembershipSummaryExtTable

	// A table for configuring the Voice VLAN-ID for the ports. An entry will
	// exist for each interface which supports Voice Vlan feature.
	VmVoiceVlanTable CISCOVLANMEMBERSHIPMIB_VmVoiceVlanTable
}

CISCOVLANMEMBERSHIPMIB

func (*CISCOVLANMEMBERSHIPMIB) GetEntityData 

func (cISCOVLANMEMBERSHIPMIB *CISCOVLANMEMBERSHIPMIB) GetEntityData() *types.CommonEntityData

type CISCOVLANMEMBERSHIPMIB_VmMembership 

type CISCOVLANMEMBERSHIPMIB_VmMembership struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter

	// This object is used to determine whether or not a non-existing VLAN will be
	// created automatically by the system after assigned to a port.
	// automatic(1):  a non-existing VLAN will be created
	// automatically by the system after                assigned to a port.
	// manual(2):     a non-existing VLAN will not be created
	// automatically by the system and need to be                manually created
	// by the users after assigned                to a port. The type is
	// VmVlanCreationMode.
	VmVlanCreationMode interface{}
}

CISCOVLANMEMBERSHIPMIB_VmMembership

func (*CISCOVLANMEMBERSHIPMIB_VmMembership) GetEntityData 

func (vmMembership *CISCOVLANMEMBERSHIPMIB_VmMembership) GetEntityData() *types.CommonEntityData

type CISCOVLANMEMBERSHIPMIB_VmMembershipSummaryExtTable 

type CISCOVLANMEMBERSHIPMIB_VmMembershipSummaryExtTable struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter

	// An entry (conceptual row) in the vmMembershipSummaryExtTable. The type is
	// slice of
	// CISCOVLANMEMBERSHIPMIB_VmMembershipSummaryExtTable_VmMembershipSummaryExtEntry.
	VmMembershipSummaryExtEntry []*CISCOVLANMEMBERSHIPMIB_VmMembershipSummaryExtTable_VmMembershipSummaryExtEntry
}

CISCOVLANMEMBERSHIPMIB_VmMembershipSummaryExtTable A summary of VLAN membership of non-trunk bridge ports. This table is used for retrieving VLAN membership information for the device which supports dot1dBasePort with value greater than 2048.

A row is created for a VLAN and a particular bridge port range, where at least one port in the range is assigned to this VLAN.

VLAN membership can only be modified via the vmMembershipTable.

func (*CISCOVLANMEMBERSHIPMIB_VmMembershipSummaryExtTable) GetEntityData 

func (vmMembershipSummaryExtTable *CISCOVLANMEMBERSHIPMIB_VmMembershipSummaryExtTable) GetEntityData() *types.CommonEntityData

type CISCOVLANMEMBERSHIPMIB_VmMembershipSummaryExtTable_VmMembershipSummaryExtEntry 

type CISCOVLANMEMBERSHIPMIB_VmMembershipSummaryExtTable_VmMembershipSummaryExtEntry struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter
	YListKey   string

	// This attribute is a key. The type is string with range: 0..4095. Refers to
	// cisco_vlan_membership_mib.CISCOVLANMEMBERSHIPMIB_VmMembershipSummaryTable_VmMembershipSummaryEntry_VmMembershipSummaryVlanIndex
	VmMembershipSummaryVlanIndex interface{}

	// This attribute is a key. The bridge port range index of this row. The type
	// is CiscoPortListRange.
	VmMembershipPortRangeIndex interface{}

	// The set of the device's member ports that belong to the VLAN. It has the
	// VLAN membership information of up to 2k ports with the port number starting
	// from the information indicated in vmMembershipPortRangeIndex object of the
	// same row. For example, if the value of vmMembershipPortRangeIndex is
	// 'twoKto4K', the port number indicated in this object starting from 2049 and
	// ending to 4096.   A port number is the value of dot1dBasePort for the port
	// in the BRIDGE-MIB (RFC 1493). The type is string with length: 0..256.
	VmMembershipSummaryExtPorts interface{}
}

CISCOVLANMEMBERSHIPMIB_VmMembershipSummaryExtTable_VmMembershipSummaryExtEntry An entry (conceptual row) in the vmMembershipSummaryExtTable.

func (*CISCOVLANMEMBERSHIPMIB_VmMembershipSummaryExtTable_VmMembershipSummaryExtEntry) GetEntityData 

func (vmMembershipSummaryExtEntry *CISCOVLANMEMBERSHIPMIB_VmMembershipSummaryExtTable_VmMembershipSummaryExtEntry) GetEntityData() *types.CommonEntityData

type CISCOVLANMEMBERSHIPMIB_VmMembershipSummaryTable 

type CISCOVLANMEMBERSHIPMIB_VmMembershipSummaryTable struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter

	// An entry (conceptual row) in the vmMembershipSummaryTable. The type is
	// slice of
	// CISCOVLANMEMBERSHIPMIB_VmMembershipSummaryTable_VmMembershipSummaryEntry.
	VmMembershipSummaryEntry []*CISCOVLANMEMBERSHIPMIB_VmMembershipSummaryTable_VmMembershipSummaryEntry
}

CISCOVLANMEMBERSHIPMIB_VmMembershipSummaryTable A summary of VLAN membership of non-trunk bridge ports. This is a convenience table for retrieving VLAN membership information.

A row is created for a VLAN if: a) the VLAN exists, or b) a port is assigned to a non-existent VLAN.

VLAN membership can only be modified via the vmMembershipTable.

func (*CISCOVLANMEMBERSHIPMIB_VmMembershipSummaryTable) GetEntityData 

func (vmMembershipSummaryTable *CISCOVLANMEMBERSHIPMIB_VmMembershipSummaryTable) GetEntityData() *types.CommonEntityData

type CISCOVLANMEMBERSHIPMIB_VmMembershipSummaryTable_VmMembershipSummaryEntry 

type CISCOVLANMEMBERSHIPMIB_VmMembershipSummaryTable_VmMembershipSummaryEntry struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter
	YListKey   string

	// This attribute is a key. The VLAN id of the VLAN. The type is interface{}
	// with range: 0..4095.
	VmMembershipSummaryVlanIndex interface{}

	// The set of the device's member ports that belong to the VLAN.  Each octet
	// within the value of this object specifies a set of eight ports, with the
	// first octet specifying ports 1 through 8, the second octet specifying ports
	// 9 through 16, etc.   Within each octet, the most significant bit represents
	// the lowest numbered port, and the least significant bit represents the
	// highest numbered port.  Thus, each port of the VLAN is represented by a
	// single bit within the value of this object.  If that bit has a value of '1'
	// then that port is included in the set of ports; the port is not included if
	// its bit has a value of '0'.  A port number is the value of dot1dBasePort
	// for the port in the BRIDGE-MIB (RFC 1493). The type is string with length:
	// 0..128.
	VmMembershipSummaryMemberPorts interface{}

	// The set of the device's member ports that belong to the VLAN. It has the
	// VLAN membership information of up to 2048 ports with the port number from 1
	// to  2048.  Each octet within the value of this object specifies a set of
	// eight ports, with the first octet specifying  ports 1 through 8, the second
	// octet specifying ports 9 through 16, etc.   Within each octet, the most
	// significant bit represents the lowest numbered port, and the least
	// significant bit represents the highest numbered port.  Thus, each port of
	// the VLAN is represented by a single bit within the value of this object.
	// If that bit has a value of '1' then that port is included in the set of
	// ports; the port is not included if its bit has a value of '0'.  A port
	// number is the value of dot1dBasePort for the port in the BRIDGE-MIB (RFC
	// 1493). The type is string with length: 0..256.
	VmMembershipSummaryMember2kPorts interface{}
}

CISCOVLANMEMBERSHIPMIB_VmMembershipSummaryTable_VmMembershipSummaryEntry An entry (conceptual row) in the vmMembershipSummaryTable.

func (*CISCOVLANMEMBERSHIPMIB_VmMembershipSummaryTable_VmMembershipSummaryEntry) GetEntityData 

func (vmMembershipSummaryEntry *CISCOVLANMEMBERSHIPMIB_VmMembershipSummaryTable_VmMembershipSummaryEntry) GetEntityData() *types.CommonEntityData

type CISCOVLANMEMBERSHIPMIB_VmMembershipTable 

type CISCOVLANMEMBERSHIPMIB_VmMembershipTable struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter

	// An entry (conceptual row) in the vmMembershipTable. The type is slice of
	// CISCOVLANMEMBERSHIPMIB_VmMembershipTable_VmMembershipEntry.
	VmMembershipEntry []*CISCOVLANMEMBERSHIPMIB_VmMembershipTable_VmMembershipEntry
}

CISCOVLANMEMBERSHIPMIB_VmMembershipTable A table for configuring VLAN port membership. There is one row for each bridge port that is assigned to a static or dynamic access port. Trunk ports are not represented in this table. An entry may be created and deleted when ports are created or deleted via SNMP or the management console on a device.

func (*CISCOVLANMEMBERSHIPMIB_VmMembershipTable) GetEntityData 

func (vmMembershipTable *CISCOVLANMEMBERSHIPMIB_VmMembershipTable) GetEntityData() *types.CommonEntityData

type CISCOVLANMEMBERSHIPMIB_VmMembershipTable_VmMembershipEntry 

type CISCOVLANMEMBERSHIPMIB_VmMembershipTable_VmMembershipEntry struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter
	YListKey   string

	// This attribute is a key. The type is string with range: 1..2147483647.
	// Refers to if_mib.IFMIB_IfTable_IfEntry_IfIndex
	IfIndex interface{}

	// The type of VLAN membership assigned to this port. A port with static vlan
	// membership is assigned to a single VLAN directly. A port with dynamic
	// membership is assigned a single VLAN based on content of packets received
	// on the port and via VQP queries to VMPS. A port with multiVlan membership
	// may be assigned to one or more VLANs directly.  A static or dynamic port
	// membership is specified by the value of vmVlan. A multiVlan port membership
	// is specified by the value of vmVlans. The type is VmVlanType.
	VmVlanType interface{}

	// The VLAN id of the VLAN the port is assigned to when vmVlanType is set to
	// static or dynamic. This object is not instantiated if not applicable.  The
	// value may be 0 if the port is not assigned to a VLAN.  If vmVlanType is
	// static, the port is always assigned to a VLAN and the object may not be set
	// to 0.  If vmVlanType is dynamic the object's value is 0 if the port is
	// currently not assigned to a VLAN. In addition, the object may be set to 0
	// only. The type is interface{} with range: 0..4095.
	VmVlan interface{}

	// An indication of the current VLAN status of the port. A status of
	// inactive(1) indicates that a dynamic port does not yet have a VLAN
	// assigned, or a port is  assigned to a VLAN that is currently not active. A
	// status of active(2) indicates that the currently  assigned VLAN is active.
	// A status of shutdown(3)  indicates that the port has been disabled as a
	// result of VQP shutdown response. The type is VmPortStatus.
	VmPortStatus interface{}

	// The VLAN(s) the port is assigned to when the port's vmVlanType is set to
	// multiVlan. This object is not instantiated if not applicable.  The port is
	// always assigned to one or more VLANs and the object may not be set so that
	// there are no vlans assigned.  Each octet within the value of this object
	// specifies a set of eight VLANs, with the first octet specifying VLAN id 1
	// through 8, the second octet specifying VLAN ids 9 through 16, etc.   Within
	// each octet, the most significant bit represents the lowest numbered VLAN
	// id, and the least significant bit represents the highest numbered VLAN id.
	// Thus, each VLAN of the port is represented by a single bit within the value
	// of this object.  If that bit has a value of '1' then that VLAN is included
	// in the set of VLANs; the VLAN is not included if its bit has a value of
	// '0'. The type is string with length: 0..128.
	VmVlans interface{}

	// The VLAN(s) the port is assigned to when the port's vmVlanType is set to
	// multiVlan. This object is not instantiated if not applicable.  The port is
	// always assigned to one or more VLANs and the object may not be set so that
	// there are no vlans assigned.  Each octet within the value of this object
	// specifies a set of eight VLANs, with the first octet specifying VLAN id
	// 1024 through 1031, the second octet specifying  VLAN ids 1032 through 1039,
	// etc.  Within each octet,  the most significant bit represents the lowest
	// numbered VLAN id, and the least significant bit  represents the highest
	// numbered VLAN id.  Thus, each  VLAN of the port is represented by a single
	// bit within the value of this object.  If that bit has a value of '1' then
	// that VLAN is included in the set of VLANs; the VLAN is not included if its
	// bit has a value of '0'. The type is string with length: 0..128.
	VmVlans2k interface{}

	// The VLAN(s) the port is assigned to when the port's vmVlanType is set to
	// multiVlan. This object is not instantiated if not applicable.  The port is
	// always assigned to one or more VLANs and the object may not be set so that
	// there are no vlans assigned.  Each octet within the value of this object
	// specifies a set of eight VLANs, with the first octet specifying VLAN id
	// 2048 through 2055, the second octet specifying  VLAN ids 2056 through 2063,
	// etc.   Within each octet,  the most significant bit represents the lowest
	// numbered VLAN id, and the least significant bit  represents the highest
	// numbered VLAN id.  Thus, each VLAN of the port is represented by a single
	// bit within the value of this object.  If that bit has a value of '1' then
	// that VLAN is included in the set of VLANs; the VLAN is not included if its
	// bit has a value of '0'. The type is string with length: 0..128.
	VmVlans3k interface{}

	// The VLAN(s) the port is assigned to when the port's vmVlanType is set to
	// multiVlan. This object is not instantiated if not applicable.  The port is
	// always assigned to one or more VLANs and the object may not be set so that
	// there are no vlans assigned.  Each octet within the value of this object
	// specifies a set of eight VLANs, with the first octet specifying VLAN id
	// 3072 through 3079, the second octet specifying  VLAN ids 3040 through 3047,
	// etc.   Within each octet,  the most significant bit represents the lowest
	// numbered VLAN id, and the least significant bit  represents the highest
	// numbered VLAN id.  Thus, each VLAN of the port is represented by a single
	// bit within the value of this object.  If that bit has a value of '1' then
	// that VLAN is included in the set of VLANs; the VLAN is not included if its
	// bit has a value of '0'. The type is string with length: 0..128.
	VmVlans4k interface{}
}

CISCOVLANMEMBERSHIPMIB_VmMembershipTable_VmMembershipEntry An entry (conceptual row) in the vmMembershipTable.

func (*CISCOVLANMEMBERSHIPMIB_VmMembershipTable_VmMembershipEntry) GetEntityData 

func (vmMembershipEntry *CISCOVLANMEMBERSHIPMIB_VmMembershipTable_VmMembershipEntry) GetEntityData() *types.CommonEntityData

type CISCOVLANMEMBERSHIPMIB_VmMembershipTable_VmMembershipEntry_VmPortStatus 

type CISCOVLANMEMBERSHIPMIB_VmMembershipTable_VmMembershipEntry_VmPortStatus string

CISCOVLANMEMBERSHIPMIB_VmMembershipTable_VmMembershipEntry_VmPortStatus represents of VQP shutdown response. 

const (
	CISCOVLANMEMBERSHIPMIB_VmMembershipTable_VmMembershipEntry_VmPortStatus_inactive CISCOVLANMEMBERSHIPMIB_VmMembershipTable_VmMembershipEntry_VmPortStatus = "inactive"

	CISCOVLANMEMBERSHIPMIB_VmMembershipTable_VmMembershipEntry_VmPortStatus_active CISCOVLANMEMBERSHIPMIB_VmMembershipTable_VmMembershipEntry_VmPortStatus = "active"

	CISCOVLANMEMBERSHIPMIB_VmMembershipTable_VmMembershipEntry_VmPortStatus_shutdown CISCOVLANMEMBERSHIPMIB_VmMembershipTable_VmMembershipEntry_VmPortStatus = "shutdown"
)

type CISCOVLANMEMBERSHIPMIB_VmMembershipTable_VmMembershipEntry_VmVlanType 

type CISCOVLANMEMBERSHIPMIB_VmMembershipTable_VmMembershipEntry_VmVlanType string

CISCOVLANMEMBERSHIPMIB_VmMembershipTable_VmMembershipEntry_VmVlanType represents specified by the value of vmVlans. 

const (
	CISCOVLANMEMBERSHIPMIB_VmMembershipTable_VmMembershipEntry_VmVlanType_static CISCOVLANMEMBERSHIPMIB_VmMembershipTable_VmMembershipEntry_VmVlanType = "static"

	CISCOVLANMEMBERSHIPMIB_VmMembershipTable_VmMembershipEntry_VmVlanType_dynamic CISCOVLANMEMBERSHIPMIB_VmMembershipTable_VmMembershipEntry_VmVlanType = "dynamic"

	CISCOVLANMEMBERSHIPMIB_VmMembershipTable_VmMembershipEntry_VmVlanType_multiVlan CISCOVLANMEMBERSHIPMIB_VmMembershipTable_VmMembershipEntry_VmVlanType = "multiVlan"
)

type CISCOVLANMEMBERSHIPMIB_VmMembership_VmVlanCreationMode 

type CISCOVLANMEMBERSHIPMIB_VmMembership_VmVlanCreationMode string

CISCOVLANMEMBERSHIPMIB_VmMembership_VmVlanCreationMode represents to a port. 

const (
	CISCOVLANMEMBERSHIPMIB_VmMembership_VmVlanCreationMode_automatic CISCOVLANMEMBERSHIPMIB_VmMembership_VmVlanCreationMode = "automatic"

	CISCOVLANMEMBERSHIPMIB_VmMembership_VmVlanCreationMode_manual CISCOVLANMEMBERSHIPMIB_VmMembership_VmVlanCreationMode = "manual"
)

type CISCOVLANMEMBERSHIPMIB_VmStatistics 

type CISCOVLANMEMBERSHIPMIB_VmStatistics struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter

	// The total number of VQP requests sent by this device to all VMPS since last
	// system re-initialization. The type is interface{} with range:
	// 0..4294967295.
	VmVQPQueries interface{}

	// The number of VQP responses received by this device from all VMPS since
	// last system re-initialization. The type is interface{} with range:
	// 0..4294967295.
	VmVQPResponses interface{}

	// The number of times, since last system re-initialization, the current VMPS
	// was changed. The current VMPS is changed whenever the VMPS fails to
	// response after vmVmpsRetries of a VQP request. The type is interface{} with
	// range: 0..4294967295.
	VmVmpsChanges interface{}

	// The number of times, since last system re-initialization, a VQP response
	// indicates  'shutdown'. A 'shutdown' response is a result of  the membership
	// policy configured at a VMPS by the administrator. The type is interface{}
	// with range: 0..4294967295.
	VmVQPShutdown interface{}

	// The number of times, since last system re-initialization, a VQP response
	// indicates  'denied'. A 'denied' response is a result of  the membership
	// policy configured at a VMPS by the administrator. The type is interface{}
	// with range: 0..4294967295.
	VmVQPDenied interface{}

	// The number of times, since last system re-initialization, a VQP response
	// indicates wrong  management domain. A wrong management domain  response
	// indicates that the VMPS used serves a  management domain that is different
	// from the device's management domain. The type is interface{} with range:
	// 0..4294967295.
	VmVQPWrongDomain interface{}

	// The number of times, since last system re-initialization, a VQP response
	// indicates wrong  VQP version. A wrong VQP version response  indicates that
	// the VMPS used supports a VQP  version that is different from the device's
	// VQP version. The type is interface{} with range: 0..4294967295.
	VmVQPWrongVersion interface{}

	// The number of times, since last system re-initialization, a VQP response
	// indicates  insufficient resources. An insufficient resources  response
	// indicates that the VMPS used does not  have the required resources to
	// verify the membership assignment requested. The type is interface{} with
	// range: 0..4294967295.
	VmInsufficientResources interface{}
}

CISCOVLANMEMBERSHIPMIB_VmStatistics

func (*CISCOVLANMEMBERSHIPMIB_VmStatistics) GetEntityData 

func (vmStatistics *CISCOVLANMEMBERSHIPMIB_VmStatistics) GetEntityData() *types.CommonEntityData

type CISCOVLANMEMBERSHIPMIB_VmStatus 

type CISCOVLANMEMBERSHIPMIB_VmStatus struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter

	// An indication of whether the notifications/traps defined in this MIB are
	// enabled. The type is bool.
	VmNotificationsEnabled interface{}
}

CISCOVLANMEMBERSHIPMIB_VmStatus

func (*CISCOVLANMEMBERSHIPMIB_VmStatus) GetEntityData 

func (vmStatus *CISCOVLANMEMBERSHIPMIB_VmStatus) GetEntityData() *types.CommonEntityData

type CISCOVLANMEMBERSHIPMIB_VmVmps 

type CISCOVLANMEMBERSHIPMIB_VmVmps struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter

	// The VLAN Query Protocol (VQP) version supported on the device. VQP is the
	// protocol used to query VLAN Membership Policy Server (VMPS) for VLAN
	// membership assignments of dynamic VLAN ports. A VMPS provides VLAN
	// membership policy assignments based on the content of the packets received
	// on a port. The type is interface{} with range: -2147483648..2147483647.
	VmVmpsVQPVersion interface{}

	// The number of retries for VQP requests to a VMPS before using the next
	// available VMPS. The type is interface{} with range: 1..10.
	VmVmpsRetries interface{}

	// The switch will reconfirm membership of addresses on each port with VMPS
	// periodically. This object specifies the interval to perform reconfirmation.
	// If the value is set to 0, the switch does not reconfirm membership with
	// VMPS. The type is interface{} with range: 0..120. Units are Minutes.
	VmVmpsReconfirmInterval interface{}

	// Setting this object to execute(2) causes the switch to reconfirm membership
	// of every dynamic port. Reading this object always return ready(1). The type
	// is VmVmpsReconfirm.
	VmVmpsReconfirm interface{}

	// This object returns the result of the last request that sets
	// vmVmpsReconfirm to execute(2). The semantics of the possible results are as
	// follows:       other(1)           - none of following      inProgress(2)
	// - reconfirm in progress      success(3)         - reconfirm completed
	// successfully      noResponse(4)      - reconfirm failed because no
	// VMPS responded      noVmps(5)          - No VMPS configured
	// noDynamicPort(6)   - No dynamic ports configured      noHostConnected(7) -
	// No hosts on dynamic ports. The type is VmVmpsReconfirmResult.
	VmVmpsReconfirmResult interface{}

	// This is the IpAddress of the current VMPS used. The type is string with
	// pattern:
	// (([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])\.){3}([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])(%[\p{N}\p{L}]+)?.
	VmVmpsCurrent interface{}
}

CISCOVLANMEMBERSHIPMIB_VmVmps

func (*CISCOVLANMEMBERSHIPMIB_VmVmps) GetEntityData 

func (vmVmps *CISCOVLANMEMBERSHIPMIB_VmVmps) GetEntityData() *types.CommonEntityData

type CISCOVLANMEMBERSHIPMIB_VmVmpsTable 

type CISCOVLANMEMBERSHIPMIB_VmVmpsTable struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter

	// An entry (conceptual row) in the vmVmpsTable. The type is slice of
	// CISCOVLANMEMBERSHIPMIB_VmVmpsTable_VmVmpsEntry.
	VmVmpsEntry []*CISCOVLANMEMBERSHIPMIB_VmVmpsTable_VmVmpsEntry
}

CISCOVLANMEMBERSHIPMIB_VmVmpsTable A table of VMPS to use. The device will use the the primary VMPS by default. If the device is unable to reach the primary server after vmVmpsRetries retries, it uses the first secondary server in the table until it runs out of secondary servers, in which case it will return to using the primary server. Entries in this table may be created and deleted via this MIB or the management console on a device.

func (*CISCOVLANMEMBERSHIPMIB_VmVmpsTable) GetEntityData 

func (vmVmpsTable *CISCOVLANMEMBERSHIPMIB_VmVmpsTable) GetEntityData() *types.CommonEntityData

type CISCOVLANMEMBERSHIPMIB_VmVmpsTable_VmVmpsEntry 

type CISCOVLANMEMBERSHIPMIB_VmVmpsTable_VmVmpsEntry struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter
	YListKey   string

	// This attribute is a key. The Ip Address of the VMPS. The type is string
	// with pattern:
	// (([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])\.){3}([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])(%[\p{N}\p{L}]+)?.
	VmVmpsIpAddress interface{}

	// The status of the VMPS. Setting this value to true will make this VMPS the
	// primary server and make the switch use this as the current server. Setting
	// this entry to true causes other rows to transition to false. Attempting to
	// write a value of false after creation will result in a return of bad value.
	// Deleting an entry whose value is true will result in the first entry in the
	// table being set to true. The type is bool.
	VmVmpsPrimary interface{}

	// The status of this conceptual row. The type is RowStatus.
	VmVmpsRowStatus interface{}
}

CISCOVLANMEMBERSHIPMIB_VmVmpsTable_VmVmpsEntry An entry (conceptual row) in the vmVmpsTable.

func (*CISCOVLANMEMBERSHIPMIB_VmVmpsTable_VmVmpsEntry) GetEntityData 

func (vmVmpsEntry *CISCOVLANMEMBERSHIPMIB_VmVmpsTable_VmVmpsEntry) GetEntityData() *types.CommonEntityData

type CISCOVLANMEMBERSHIPMIB_VmVmps_VmVmpsReconfirm 

type CISCOVLANMEMBERSHIPMIB_VmVmps_VmVmpsReconfirm string

CISCOVLANMEMBERSHIPMIB_VmVmps_VmVmpsReconfirm represents Reading this object always return ready(1). 

const (
	CISCOVLANMEMBERSHIPMIB_VmVmps_VmVmpsReconfirm_ready CISCOVLANMEMBERSHIPMIB_VmVmps_VmVmpsReconfirm = "ready"

	CISCOVLANMEMBERSHIPMIB_VmVmps_VmVmpsReconfirm_execute CISCOVLANMEMBERSHIPMIB_VmVmps_VmVmpsReconfirm = "execute"
)

type CISCOVLANMEMBERSHIPMIB_VmVmps_VmVmpsReconfirmResult 

type CISCOVLANMEMBERSHIPMIB_VmVmps_VmVmpsReconfirmResult string

CISCOVLANMEMBERSHIPMIB_VmVmps_VmVmpsReconfirmResult represents noHostConnected(7) - No hosts on dynamic ports 

const (
	CISCOVLANMEMBERSHIPMIB_VmVmps_VmVmpsReconfirmResult_other CISCOVLANMEMBERSHIPMIB_VmVmps_VmVmpsReconfirmResult = "other"

	CISCOVLANMEMBERSHIPMIB_VmVmps_VmVmpsReconfirmResult_inProgress CISCOVLANMEMBERSHIPMIB_VmVmps_VmVmpsReconfirmResult = "inProgress"

	CISCOVLANMEMBERSHIPMIB_VmVmps_VmVmpsReconfirmResult_success CISCOVLANMEMBERSHIPMIB_VmVmps_VmVmpsReconfirmResult = "success"

	CISCOVLANMEMBERSHIPMIB_VmVmps_VmVmpsReconfirmResult_noResponse CISCOVLANMEMBERSHIPMIB_VmVmps_VmVmpsReconfirmResult = "noResponse"

	CISCOVLANMEMBERSHIPMIB_VmVmps_VmVmpsReconfirmResult_noVmps CISCOVLANMEMBERSHIPMIB_VmVmps_VmVmpsReconfirmResult = "noVmps"

	CISCOVLANMEMBERSHIPMIB_VmVmps_VmVmpsReconfirmResult_noDynamicPort CISCOVLANMEMBERSHIPMIB_VmVmps_VmVmpsReconfirmResult = "noDynamicPort"

	CISCOVLANMEMBERSHIPMIB_VmVmps_VmVmpsReconfirmResult_noHostConnected CISCOVLANMEMBERSHIPMIB_VmVmps_VmVmpsReconfirmResult = "noHostConnected"
)

type CISCOVLANMEMBERSHIPMIB_VmVoiceVlanTable 

type CISCOVLANMEMBERSHIPMIB_VmVoiceVlanTable struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter

	// An entry (conceptual row) in the vmVoiceVlanTable. Only interfaces which
	// support Voice Vlan feature are shown. The type is slice of
	// CISCOVLANMEMBERSHIPMIB_VmVoiceVlanTable_VmVoiceVlanEntry.
	VmVoiceVlanEntry []*CISCOVLANMEMBERSHIPMIB_VmVoiceVlanTable_VmVoiceVlanEntry
}

CISCOVLANMEMBERSHIPMIB_VmVoiceVlanTable A table for configuring the Voice VLAN-ID for the ports. An entry will exist for each interface which supports Voice Vlan feature.

func (*CISCOVLANMEMBERSHIPMIB_VmVoiceVlanTable) GetEntityData 

func (vmVoiceVlanTable *CISCOVLANMEMBERSHIPMIB_VmVoiceVlanTable) GetEntityData() *types.CommonEntityData

type CISCOVLANMEMBERSHIPMIB_VmVoiceVlanTable_VmVoiceVlanEntry 

type CISCOVLANMEMBERSHIPMIB_VmVoiceVlanTable_VmVoiceVlanEntry struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter
	YListKey   string

	// This attribute is a key. The type is string with range: 1..2147483647.
	// Refers to if_mib.IFMIB_IfTable_IfEntry_IfIndex
	IfIndex interface{}

	// The Voice Vlan ID (VVID) to which this port belongs to.  0    -    The CDP
	// packets transmitting            through this port would contain
	// Appliance VLAN-ID TLV with value            of 0. VoIP and related packets
	// are expected to be sent and            received with VLAN-id=0 and an
	// 802.1p priority.   1..4094 - The CDP packets transmitting           through
	// this port would contain           Appliance VLAN-ID TLV with N.
	// VoIP and related packets are           expected to be sent and received
	// with VLAN-id=N and an 802.1p           priority.  4095  -   The CDP packets
	// transmitting           through this port would contain           Appliance
	// VLAN-ID TLV with value           of 4095. VoIP and related packets
	// are expected to be sent and            received untagged without an
	// 802.1p priority.  4096  -   The CDP packets transmitting            through
	// this port would not            include Appliance VLAN-ID TLV;
	// or, if the VVID is not supported            on the port, this MIB object
	// will           not be configurable and will            return 4096. The
	// type is interface{} with range: 0..4096.
	VmVoiceVlanId interface{}

	// Enable or Disable the feature of CDP message verification of voice VLANs.
	// true   - The voice VLAN vmVoiceVlan is enabled           only after CDP
	// messages are received           from the IP phone.  false -  The voice VLAN
	// vmVoiceVlan is enabled          as soon as the IP phone interface is
	// up. There is no verification needed           from CDP messages from the IP
	// phone. The type is bool.
	VmVoiceVlanCdpVerifyEnable interface{}
}

CISCOVLANMEMBERSHIPMIB_VmVoiceVlanTable_VmVoiceVlanEntry An entry (conceptual row) in the vmVoiceVlanTable. Only interfaces which support Voice Vlan feature are shown.

func (*CISCOVLANMEMBERSHIPMIB_VmVoiceVlanTable_VmVoiceVlanEntry) GetEntityData 

func (vmVoiceVlanEntry *CISCOVLANMEMBERSHIPMIB_VmVoiceVlanTable_VmVoiceVlanEntry) GetEntityData() *types.CommonEntityData

Source Files

View all Source files

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL
go.dev uses cookies from Google to deliver and enhance the quality of its services and to analyze traffic. Learn more.