cisco_ipsla_echo_mib

package
v0.0.0-...-fac1166 Latest Latest
Warning

This package is not in the latest version of its module.

 Go to latest Published: Oct 17, 2019 License: Apache-2.0 Imports: 6 Imported by: 0

Documentation

Overview

This MIB module defines the templates for IP SLA operations of ICMP echo, UDP echo and TCP connect.

The ICMP echo operation measures end-to-end response time between a Cisco router and any IP enabled device by computing the time taken between sending an ICMP echo request message to the destination and receiving an ICMP echo reply.

The UDP echo operation measures end-to-end response time between a Cisco router and any IP enabled device by computing the time taken between sending an UDP echo request message to the destination and receiving an UDP echo reply.

The TCP connect operation measures end-to-end response time between a Cisco router and any IP enabled device by computing the time taken to perform a TCP connect operation.

Index

Constants

This section is empty.

Variables

This section is empty.

Functions

This section is empty.

Types

type CISCOIPSLAECHOMIB 

type CISCOIPSLAECHOMIB struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter

	// A table that contains ICMP echo template definitions.
	CipslaIcmpEchoTmplTable CISCOIPSLAECHOMIB_CipslaIcmpEchoTmplTable

	// A table that contains UDP echo template specific definitions.
	CipslaUdpEchoTmplTable CISCOIPSLAECHOMIB_CipslaUdpEchoTmplTable

	// A table that contains TCP connect template specific definitions.
	CipslaTcpConnTmplTable CISCOIPSLAECHOMIB_CipslaTcpConnTmplTable
}

CISCOIPSLAECHOMIB

func (*CISCOIPSLAECHOMIB) GetEntityData 

func (cISCOIPSLAECHOMIB *CISCOIPSLAECHOMIB) GetEntityData() *types.CommonEntityData

type CISCOIPSLAECHOMIB_CipslaIcmpEchoTmplTable 

type CISCOIPSLAECHOMIB_CipslaIcmpEchoTmplTable struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter

	// A row entry representing an IPSLA ICMP echo template. The type is slice of
	// CISCOIPSLAECHOMIB_CipslaIcmpEchoTmplTable_CipslaIcmpEchoTmplEntry.
	CipslaIcmpEchoTmplEntry []*CISCOIPSLAECHOMIB_CipslaIcmpEchoTmplTable_CipslaIcmpEchoTmplEntry
}

CISCOIPSLAECHOMIB_CipslaIcmpEchoTmplTable A table that contains ICMP echo template definitions.

func (*CISCOIPSLAECHOMIB_CipslaIcmpEchoTmplTable) GetEntityData 

func (cipslaIcmpEchoTmplTable *CISCOIPSLAECHOMIB_CipslaIcmpEchoTmplTable) GetEntityData() *types.CommonEntityData

type CISCOIPSLAECHOMIB_CipslaIcmpEchoTmplTable_CipslaIcmpEchoTmplEntry 

type CISCOIPSLAECHOMIB_CipslaIcmpEchoTmplTable_CipslaIcmpEchoTmplEntry struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter
	YListKey   string

	// This attribute is a key. This field is used to specify the ICMP echo
	// template name. The type is string with length: 1..64.
	CipslaIcmpEchoTmplName interface{}

	// This field is used to provide description for the ICMP echo template. The
	// type is string with length: 0..128.
	CipslaIcmpEchoTmplDescription interface{}

	// An enumerated value which specifies the IP address type of the source. It
	// must be used along with the cipslaIcmpEchoTmplSrcAddr object. The type is
	// InetAddressType.
	CipslaIcmpEchoTmplSrcAddrType interface{}

	// A string which specifies the IP address of the source. The type is string
	// with length: 0..255.
	CipslaIcmpEchoTmplSrcAddr interface{}

	// Specifies the duration to wait for a IP SLA operation completion.   For
	// connection oriented protocols, this may cause the connection to be closed
	// by the operation.  Once closed, it will be assumed that the connection
	// reestablishment will be performed.  To prevent unwanted closure of
	// connections, be sure to set this value to a realistic connection timeout.
	// The type is interface{} with range: 0..604800000. Units are milliseconds.
	CipslaIcmpEchoTmplTimeOut interface{}

	// When set to true, the resulting data in each IP SLA operation is compared
	// with the expected data.  This includes checking header information (if
	// possible) and exact packet size. The type is bool.
	CipslaIcmpEchoTmplVerifyData interface{}

	// This object represents the number of octets to be placed into the ARR Data
	// portion of the request message, when using SNA protocols.  For non-ARR
	// protocols' IP SLA request/responses, this value represents the native
	// payload size.  REMEMBER:  The ARR Header overhead is not included
	// in this value. The type is interface{} with range: 0..16384. Units are
	// octets.
	CipslaIcmpEchoTmplReqDataSize interface{}

	// This object represents the type of service octet in an IP header. The type
	// is interface{} with range: 0..255.
	CipslaIcmpEchoTmplTOS interface{}

	// This field is used to specify the VRF name with which the IP SLA operation
	// will be used. For regular IP SLA operation this field should not be
	// configured. The agent will use this field to identify the VRF routing table
	// for this operation. The type is string with length: 0..32.
	CipslaIcmpEchoTmplVrfName interface{}

	// This object defines an administrative threshold limit. If the IP SLA
	// operation time exceeds this limit and if the condition specified in
	// cipslaIcmpEchoTmplHistFilter is satisfied, one threshold crossing
	// occurrence will be counted. The type is interface{} with range:
	// 0..2147483647. Units are milliseconds.
	CipslaIcmpEchoTmplThreshold interface{}

	// The maximum number of history lives to record.  A life is defined by the
	// countdown (or transition) to zero  by the cipslaAutoGroupScheduleLife
	// object.  A new life is created when the same conceptual control row is
	// restarted via the transition of the  cipslaAutoGroupScheduleLife object and
	// its subsequent  countdown.  The value of zero will shut off all data
	// collection. The type is interface{} with range: 0..2.
	CipslaIcmpEchoTmplHistLives interface{}

	// The maximum number of history buckets to record. This value is set to the
	// number of operations  to keep per lifetime.  After
	// cipslaIcmpEchoTmplHistBuckets are filled, the  oldest entries are deleted
	// and the most recent cipslaIcmpEchoTmplHistBuckets buckets are retained. The
	// type is interface{} with range: 1..60.
	CipslaIcmpEchoTmplHistBuckets interface{}

	// Defines a filter for adding RTT results to the history buffer:  none(1)
	// - no history is recorded all(2)           - the results of all completion
	// times                     and failed completions are recorded
	// overThreshold(3) - the results of completion times                    over
	// cipslaIcmpEchoTmplThreshold are                     recorded. failures(4)
	// - the results of failed operations (only)                     are recorded.
	// The type is CipslaIcmpEchoTmplHistFilter.
	CipslaIcmpEchoTmplHistFilter interface{}

	// The maximum number of hours for which statistics are maintained.
	// Specifically this is the number of hourly  groups to keep before rolling
	// over.  The value of one is not advisable because the hourly group will
	// close and immediately be deleted before the network management station will
	// have the opportunity to retrieve the statistics.  The value of zero will
	// shut off data collection. The type is interface{} with range: 0..25. Units
	// are hours.
	CipslaIcmpEchoTmplStatsHours interface{}

	// The maximum number of statistical distribution buckets to accumulate.
	// Since this index does not rollover, only the first
	// cipslaIcmpEchoTmplStatsNumDistBuckets will be kept.  The last
	// cipslaIcmpEchoTmplStatsNumDistBucket will contain all entries from its
	// distribution interval start point to infinity. The type is interface{} with
	// range: 1..20.
	CipslaIcmpEchoTmplDistBuckets interface{}

	// The statistical distribution buckets interval.  Distribution Bucket
	// Example:  cipslaIcmpEchoTmplDistBuckets = 5 buckets
	// cipslaIcmpEchoTmplDistInterval = 10 milliseconds  | Bucket 1 | Bucket 2 |
	// Bucket 3 | Bucket 4 | Bucket 5  | |  0-9 ms  | 10-19 ms | 20-29 ms | 30-39
	// ms | 40-Inf ms |  Odd Example:  cipslaIcmpEchoTmplDistBuckets = 1 buckets
	// cipslaIcmpEchoTmplDistInterval = 10 milliseconds  | Bucket 1  | |  0-Inf ms
	// |  Thus, this odd example shows that the value of
	// cipslaIcmpEchoTmplDistInterval does not apply when
	// cipslaIcmpEchoTmplDistBuckets is one. The type is interface{} with range:
	// 1..100. Units are milliseconds.
	CipslaIcmpEchoTmplDistInterval interface{}

	// The storage type of this conceptual row. The type is StorageType.
	CipslaIcmpEchoTmplStorageType interface{}

	// The status of the conceptual ICMP echo template control row. When the
	// status is active, all the read-create objects in that  row can be modified.
	// The type is RowStatus.
	CipslaIcmpEchoTmplRowStatus interface{}
}

CISCOIPSLAECHOMIB_CipslaIcmpEchoTmplTable_CipslaIcmpEchoTmplEntry A row entry representing an IPSLA ICMP echo template.

func (*CISCOIPSLAECHOMIB_CipslaIcmpEchoTmplTable_CipslaIcmpEchoTmplEntry) GetEntityData 

func (cipslaIcmpEchoTmplEntry *CISCOIPSLAECHOMIB_CipslaIcmpEchoTmplTable_CipslaIcmpEchoTmplEntry) GetEntityData() *types.CommonEntityData

type CISCOIPSLAECHOMIB_CipslaIcmpEchoTmplTable_CipslaIcmpEchoTmplEntry_CipslaIcmpEchoTmplHistFilter 

type CISCOIPSLAECHOMIB_CipslaIcmpEchoTmplTable_CipslaIcmpEchoTmplEntry_CipslaIcmpEchoTmplHistFilter string

CISCOIPSLAECHOMIB_CipslaIcmpEchoTmplTable_CipslaIcmpEchoTmplEntry_CipslaIcmpEchoTmplHistFilter represents are recorded. 

const (
	CISCOIPSLAECHOMIB_CipslaIcmpEchoTmplTable_CipslaIcmpEchoTmplEntry_CipslaIcmpEchoTmplHistFilter_none CISCOIPSLAECHOMIB_CipslaIcmpEchoTmplTable_CipslaIcmpEchoTmplEntry_CipslaIcmpEchoTmplHistFilter = "none"

	CISCOIPSLAECHOMIB_CipslaIcmpEchoTmplTable_CipslaIcmpEchoTmplEntry_CipslaIcmpEchoTmplHistFilter_all CISCOIPSLAECHOMIB_CipslaIcmpEchoTmplTable_CipslaIcmpEchoTmplEntry_CipslaIcmpEchoTmplHistFilter = "all"

	CISCOIPSLAECHOMIB_CipslaIcmpEchoTmplTable_CipslaIcmpEchoTmplEntry_CipslaIcmpEchoTmplHistFilter_overThreshold CISCOIPSLAECHOMIB_CipslaIcmpEchoTmplTable_CipslaIcmpEchoTmplEntry_CipslaIcmpEchoTmplHistFilter = "overThreshold"

	CISCOIPSLAECHOMIB_CipslaIcmpEchoTmplTable_CipslaIcmpEchoTmplEntry_CipslaIcmpEchoTmplHistFilter_failures CISCOIPSLAECHOMIB_CipslaIcmpEchoTmplTable_CipslaIcmpEchoTmplEntry_CipslaIcmpEchoTmplHistFilter = "failures"
)

type CISCOIPSLAECHOMIB_CipslaTcpConnTmplTable 

type CISCOIPSLAECHOMIB_CipslaTcpConnTmplTable struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter

	// A row entry representing an IPSLA TCP connect template. The type is slice
	// of CISCOIPSLAECHOMIB_CipslaTcpConnTmplTable_CipslaTcpConnTmplEntry.
	CipslaTcpConnTmplEntry []*CISCOIPSLAECHOMIB_CipslaTcpConnTmplTable_CipslaTcpConnTmplEntry
}

CISCOIPSLAECHOMIB_CipslaTcpConnTmplTable A table that contains TCP connect template specific definitions.

func (*CISCOIPSLAECHOMIB_CipslaTcpConnTmplTable) GetEntityData 

func (cipslaTcpConnTmplTable *CISCOIPSLAECHOMIB_CipslaTcpConnTmplTable) GetEntityData() *types.CommonEntityData

type CISCOIPSLAECHOMIB_CipslaTcpConnTmplTable_CipslaTcpConnTmplEntry 

type CISCOIPSLAECHOMIB_CipslaTcpConnTmplTable_CipslaTcpConnTmplEntry struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter
	YListKey   string

	// This attribute is a key. A string which specifies the TCP connect template
	// name. The type is string with length: 1..64.
	CipslaTcpConnTmplName interface{}

	// A string which provides description for the TCP connect template. The type
	// is string with length: 0..128.
	CipslaTcpConnTmplDescription interface{}

	// If this object is enabled, then the IP SLA application will send control
	// messages to a responder, residing on the target router to respond to the
	// data request packets being sent by the source router. The type is bool.
	CipslaTcpConnTmplControlEnable interface{}

	// An enumerated value which specifies the IP address type of the source. It
	// must be used along with the cipslaTcpConnTmplSrcAddr object. The type is
	// InetAddressType.
	CipslaTcpConnTmplSrcAddrType interface{}

	// A string which specifies the IP address of the source. The type is string
	// with length: 0..255.
	CipslaTcpConnTmplSrcAddr interface{}

	// This object represents the source's port number. If this object is not
	// specified, the application will get a port allocated by the system. The
	// type is interface{} with range: 0..65535.
	CipslaTcpConnTmplSrcPort interface{}

	// Specifies the duration to wait for an IP SLA operation completion.  For
	// connection oriented protocols, this may cause the connection to be closed
	// by the operation.  Once closed, it will be assumed that the connection
	// reestablishment will be performed.  To prevent unwanted closure of
	// connections, be sure to set this value to a realistic connection timeout.
	// The type is interface{} with range: 0..604800000. Units are milliseconds.
	CipslaTcpConnTmplTimeOut interface{}

	// When set to true, the resulting data in each IP SLA operation is compared
	// with the expected data.  This includes checking header information (if
	// possible) and exact packet size. The type is bool.
	CipslaTcpConnTmplVerifyData interface{}

	// This object represents the type of service octet in an IP header. The type
	// is interface{} with range: 0..255.
	CipslaTcpConnTmplTOS interface{}

	// This object defines an administrative threshold limit. If the IP SLA
	// operation time exceeds this limit and if the condition specified in
	// cipslaTcpConnTmplHistFilter is  satisfied, one threshold crossing
	// occurrence will be counted. The type is interface{} with range:
	// 0..2147483647. Units are milliseconds.
	CipslaTcpConnTmplThreshold interface{}

	// The maximum number of history lives to record.  A life is defined by the
	// countdown (or transition) to zero  by the cipslaAutoGroupScheduleLife
	// object.  A new life is created when the same conceptual control row is
	// restarted via the transition of the  cipslaAutoGroupScheduleLife object and
	// its subsequent  countdown.  The value of zero will shut off all data
	// collection. The type is interface{} with range: 0..2.
	CipslaTcpConnTmplHistLives interface{}

	// The maximum number of history buckets to record. This value should be set
	// to the number of operations  to keep per lifetime.  After
	// cipslaTcpConnTmplHistBuckets are filled, the  oldest entries are deleted
	// and the most recent cipslaTcpConnTmplHistBuckets buckets are retained. The
	// type is interface{} with range: 1..60.
	CipslaTcpConnTmplHistBuckets interface{}

	// Defines a filter for adding RTT results to the history buffer:  none(1)
	// - no history is recorded all(2)           - the results of all completion
	// times                     and failed completions are recorded
	// overThreshold(3) - the results of completion times                    over
	// cipslaTcpConnTmplThreshold are                     recorded. failures(4)
	// - the results of failed operations (only)                     are recorded.
	// The type is CipslaTcpConnTmplHistFilter.
	CipslaTcpConnTmplHistFilter interface{}

	// The maximum number of hours for which statistics are maintained.
	// Specifically this is the number of hourly  groups to keep before rolling
	// over.  The value of one is not advisable because the hourly group will
	// close and immediately be deleted before the network management station will
	// have the opportunity to retrieve the statistics.  The value of zero will
	// shut off data collection. The type is interface{} with range: 0..25. Units
	// are hours.
	CipslaTcpConnTmplStatsHours interface{}

	// The maximum number of statistical distribution buckets to accumulate.
	// Since this index does not rollover, only the first
	// cipslaTcpConnTmplDistBuckets will be kept.  The last
	// cipslaTcpConnTmplDistBuckets will contain all entries from its distribution
	// interval start point to infinity. The type is interface{} with range:
	// 1..20.
	CipslaTcpConnTmplDistBuckets interface{}

	// The statistical distribution buckets interval.  Distribution Bucket
	// Example:  cipslaTcpConnTmplDistBuckets = 5 buckets
	// cipslaTcpConnTmplDistInterval = 10 milliseconds  | Bucket 1 | Bucket 2 |
	// Bucket 3 | Bucket 4 | Bucket 5  | |  0-9 ms  | 10-19 ms | 20-29 ms | 30-39
	// ms | 40-Inf ms |  Odd Example:  cipslaTcpConnTmplDistBuckets = 1 buckets
	// cipslaTcpConnTmplDistInterval = 10 milliseconds  | Bucket 1  | |  0-Inf ms
	// |  Thus, this odd example shows that the value of
	// cipslaTcpConnTmplDistInterval does not apply when
	// cipslaTcpConnTmplDistBuckets is one. The type is interface{} with range:
	// 1..100. Units are milliseconds.
	CipslaTcpConnTmplDistInterval interface{}

	// The storage type of this conceptual row. The type is StorageType.
	CipslaTcpConnTmplStorageType interface{}

	// The status of the conceptual tcp connect control row. When the status is
	// active, all the read-create objects  in that row can be modified. The type
	// is RowStatus.
	CipslaTcpConnTmplRowStatus interface{}
}

CISCOIPSLAECHOMIB_CipslaTcpConnTmplTable_CipslaTcpConnTmplEntry A row entry representing an IPSLA TCP connect template.

func (*CISCOIPSLAECHOMIB_CipslaTcpConnTmplTable_CipslaTcpConnTmplEntry) GetEntityData 

func (cipslaTcpConnTmplEntry *CISCOIPSLAECHOMIB_CipslaTcpConnTmplTable_CipslaTcpConnTmplEntry) GetEntityData() *types.CommonEntityData

type CISCOIPSLAECHOMIB_CipslaTcpConnTmplTable_CipslaTcpConnTmplEntry_CipslaTcpConnTmplHistFilter 

type CISCOIPSLAECHOMIB_CipslaTcpConnTmplTable_CipslaTcpConnTmplEntry_CipslaTcpConnTmplHistFilter string

CISCOIPSLAECHOMIB_CipslaTcpConnTmplTable_CipslaTcpConnTmplEntry_CipslaTcpConnTmplHistFilter represents are recorded. 

const (
	CISCOIPSLAECHOMIB_CipslaTcpConnTmplTable_CipslaTcpConnTmplEntry_CipslaTcpConnTmplHistFilter_none CISCOIPSLAECHOMIB_CipslaTcpConnTmplTable_CipslaTcpConnTmplEntry_CipslaTcpConnTmplHistFilter = "none"

	CISCOIPSLAECHOMIB_CipslaTcpConnTmplTable_CipslaTcpConnTmplEntry_CipslaTcpConnTmplHistFilter_all CISCOIPSLAECHOMIB_CipslaTcpConnTmplTable_CipslaTcpConnTmplEntry_CipslaTcpConnTmplHistFilter = "all"

	CISCOIPSLAECHOMIB_CipslaTcpConnTmplTable_CipslaTcpConnTmplEntry_CipslaTcpConnTmplHistFilter_overThreshold CISCOIPSLAECHOMIB_CipslaTcpConnTmplTable_CipslaTcpConnTmplEntry_CipslaTcpConnTmplHistFilter = "overThreshold"

	CISCOIPSLAECHOMIB_CipslaTcpConnTmplTable_CipslaTcpConnTmplEntry_CipslaTcpConnTmplHistFilter_failures CISCOIPSLAECHOMIB_CipslaTcpConnTmplTable_CipslaTcpConnTmplEntry_CipslaTcpConnTmplHistFilter = "failures"
)

type CISCOIPSLAECHOMIB_CipslaUdpEchoTmplTable 

type CISCOIPSLAECHOMIB_CipslaUdpEchoTmplTable struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter

	// A row entry representing an IPSLA UDP echo template. The type is slice of
	// CISCOIPSLAECHOMIB_CipslaUdpEchoTmplTable_CipslaUdpEchoTmplEntry.
	CipslaUdpEchoTmplEntry []*CISCOIPSLAECHOMIB_CipslaUdpEchoTmplTable_CipslaUdpEchoTmplEntry
}

CISCOIPSLAECHOMIB_CipslaUdpEchoTmplTable A table that contains UDP echo template specific definitions.

func (*CISCOIPSLAECHOMIB_CipslaUdpEchoTmplTable) GetEntityData 

func (cipslaUdpEchoTmplTable *CISCOIPSLAECHOMIB_CipslaUdpEchoTmplTable) GetEntityData() *types.CommonEntityData

type CISCOIPSLAECHOMIB_CipslaUdpEchoTmplTable_CipslaUdpEchoTmplEntry 

type CISCOIPSLAECHOMIB_CipslaUdpEchoTmplTable_CipslaUdpEchoTmplEntry struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter
	YListKey   string

	// This attribute is a key. A string which specifies the UDP echo template
	// name. The type is string with length: 1..64.
	CipslaUdpEchoTmplName interface{}

	// A string which provides description to the UDP echo template. The type is
	// string with length: 0..128.
	CipslaUdpEchoTmplDescription interface{}

	// If this object is enabled, then the IP SLA application will send control
	// messages to a responder, residing on the target router to respond to the
	// data request packets being sent by the source router. The type is bool.
	CipslaUdpEchoTmplControlEnable interface{}

	// An enumerated value which specifies the IP address type of the source. It
	// must be used along with the cipslaUdpEchoTmplSrcAddr object. The type is
	// InetAddressType.
	CipslaUdpEchoTmplSrcAddrType interface{}

	// A string which specifies the IP address of the source. The type is string
	// with length: 0..255.
	CipslaUdpEchoTmplSrcAddr interface{}

	// This object represents the source's port number. If this object is not
	// specified, the application will get a port allocated by the system. The
	// type is interface{} with range: 0..65535.
	CipslaUdpEchoTmplSrcPort interface{}

	// Specifies the duration to wait for an IP SLA operation completion.  For
	// connection oriented protocols, this may cause the connection to be closed
	// by the operation.  Once closed, it will be assumed that the connection
	// reestablishment will be performed.  To prevent unwanted closure of
	// connections, be sure to set this value to a realistic connection timeout.
	// The type is interface{} with range: 0..604800000. Units are milliseconds.
	CipslaUdpEchoTmplTimeOut interface{}

	// When set to true, the resulting data in each IP SLA operation is compared
	// with the expected data.  This includes checking header information (if
	// possible) and exact packet size. The type is bool.
	CipslaUdpEchoTmplVerifyData interface{}

	// This object represents the number of octets to be placed into the ARR Data
	// portion of the request message, when using SNA protocols.  For non-ARR
	// protocols' RTT request/responses, this value represents the native payload
	// size.  REMEMBER:  The ARR Header overhead is not included            in
	// this value. The type is interface{} with range: 4..1500. Units are octets.
	CipslaUdpEchoTmplReqDataSize interface{}

	// This object represents the type of service octet in an IP header. The type
	// is interface{} with range: 0..255.
	CipslaUdpEchoTmplTOS interface{}

	// This field is used to specify the VRF name with which the IP SLA operation
	// will be used. For regular IP SLA operation this field should not be
	// configured. The agent will use this field to identify the VRF routing Table
	// for this operation. The type is string with length: 0..32.
	CipslaUdpEchoTmplVrfName interface{}

	// This object defines an administrative threshold limit. If the IP SLA
	// operation time exceeds this limit and if the condition specified in
	// cipslaUdpEchoTmplHistFilter is  satisfied, one threshold crossing
	// occurrence will be counted. The type is interface{} with range:
	// 0..2147483647. Units are milliseconds.
	CipslaUdpEchoTmplThreshold interface{}

	// The maximum number of history lives to record.  A life is defined by the
	// countdown (or transition) to zero  by the cipslaAutoGroupScheduleLife
	// object.  A new life is created when the same conceptual control row is
	// restarted via the transition of the  cipslaAutoGroupScheduleLife object and
	// its subsequent  countdown.  The value of zero will shut off all data
	// collection. The type is interface{} with range: 0..2.
	CipslaUdpEchoTmplHistLives interface{}

	// The maximum number of history buckets to record. This value should be set
	// to the number of operations  to keep per lifetime.  After
	// cipslaUdpEchoTmplHistBuckets are filled, the  oldest entries are deleted
	// and the most recent cipslaUdpEchoTmplHistBuckets buckets are retained. The
	// type is interface{} with range: 1..60.
	CipslaUdpEchoTmplHistBuckets interface{}

	// Defines a filter for adding RTT results to the history buffer:  none(1)
	// - no history is recorded all(2)           - the results of all completion
	// times                     and failed completions are recorded
	// overThreshold(3) - the results of completion times                    over
	// cipslaUdpEchoTmplThreshold are                     recorded. failures(4)
	// - the results of failed operations (only)                     are recorded.
	// The type is CipslaUdpEchoTmplHistFilter.
	CipslaUdpEchoTmplHistFilter interface{}

	// The maximum number of hours for which statistics are maintained.
	// Specifically this is the number of hourly  groups to keep before rolling
	// over.  The value of one is not advisable because the hourly group will
	// close and immediately be deleted before the network management station will
	// have the opportunity to retrieve the statistics.  The value of zero will
	// shut off data collection. The type is interface{} with range: 0..25. Units
	// are hours.
	CipslaUdpEchoTmplStatsHours interface{}

	// The maximum number of statistical distribution buckets to accumulate.
	// Since this index does not rollover, only the first
	// cipslaUdpEchoTmplStatsNumDistBuckets will be kept.  The last
	// cipslaUdpEchoTmplStatsNumDistBuckets will contain all entries from its
	// distribution interval start point to infinity. The type is interface{} with
	// range: 1..20.
	CipslaUdpEchoTmplDistBuckets interface{}

	// The statistical distribution buckets interval.  Distribution Bucket
	// Example:  cipslaUdpEchoTmplDistBuckets = 5 buckets
	// cipslaUdpEchoTmplDistInterval = 10 milliseconds  | Bucket 1 | Bucket 2 |
	// Bucket 3 | Bucket 4 | Bucket 5  | |  0-9 ms  | 10-19 ms | 20-29 ms | 30-39
	// ms | 40-Inf ms |  Odd Example:  cipslaUdpEchoTmplDistBuckets = 1 buckets
	// cipslaUdpEchoTmplDistInterval = 10 milliseconds  | Bucket 1  | |  0-Inf ms
	// |  Thus, this odd example shows that the value of
	// cipslaUdpEchoTmplDistInterval does not apply when
	// cipslaUdpEchoTmplDistBuckets is one. The type is interface{} with range:
	// 1..100. Units are milliseconds.
	CipslaUdpEchoTmplDistInterval interface{}

	// The storage type of this conceptual row. The type is StorageType.
	CipslaUdpEchoTmplStorageType interface{}

	// The status of the conceptual UDP echo template control row. When the status
	// is active, all the read-create objects in  that row can be modified. The
	// type is RowStatus.
	CipslaUdpEchoTmplRowStatus interface{}
}

CISCOIPSLAECHOMIB_CipslaUdpEchoTmplTable_CipslaUdpEchoTmplEntry A row entry representing an IPSLA UDP echo template.

func (*CISCOIPSLAECHOMIB_CipslaUdpEchoTmplTable_CipslaUdpEchoTmplEntry) GetEntityData 

func (cipslaUdpEchoTmplEntry *CISCOIPSLAECHOMIB_CipslaUdpEchoTmplTable_CipslaUdpEchoTmplEntry) GetEntityData() *types.CommonEntityData

type CISCOIPSLAECHOMIB_CipslaUdpEchoTmplTable_CipslaUdpEchoTmplEntry_CipslaUdpEchoTmplHistFilter 

type CISCOIPSLAECHOMIB_CipslaUdpEchoTmplTable_CipslaUdpEchoTmplEntry_CipslaUdpEchoTmplHistFilter string

CISCOIPSLAECHOMIB_CipslaUdpEchoTmplTable_CipslaUdpEchoTmplEntry_CipslaUdpEchoTmplHistFilter represents are recorded. 

const (
	CISCOIPSLAECHOMIB_CipslaUdpEchoTmplTable_CipslaUdpEchoTmplEntry_CipslaUdpEchoTmplHistFilter_none CISCOIPSLAECHOMIB_CipslaUdpEchoTmplTable_CipslaUdpEchoTmplEntry_CipslaUdpEchoTmplHistFilter = "none"

	CISCOIPSLAECHOMIB_CipslaUdpEchoTmplTable_CipslaUdpEchoTmplEntry_CipslaUdpEchoTmplHistFilter_all CISCOIPSLAECHOMIB_CipslaUdpEchoTmplTable_CipslaUdpEchoTmplEntry_CipslaUdpEchoTmplHistFilter = "all"

	CISCOIPSLAECHOMIB_CipslaUdpEchoTmplTable_CipslaUdpEchoTmplEntry_CipslaUdpEchoTmplHistFilter_overThreshold CISCOIPSLAECHOMIB_CipslaUdpEchoTmplTable_CipslaUdpEchoTmplEntry_CipslaUdpEchoTmplHistFilter = "overThreshold"

	CISCOIPSLAECHOMIB_CipslaUdpEchoTmplTable_CipslaUdpEchoTmplEntry_CipslaUdpEchoTmplHistFilter_failures CISCOIPSLAECHOMIB_CipslaUdpEchoTmplTable_CipslaUdpEchoTmplEntry_CipslaUdpEchoTmplHistFilter = "failures"
)

Source Files

View all Source files

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL
go.dev uses cookies from Google to deliver and enhance the quality of its services and to analyze traffic. Learn more.