cisco_ietf_pw_mpls_mib

package
v0.0.0-...-fac1166 Latest Latest
Warning

This package is not in the latest version of its module.

 Go to latest Published: Oct 17, 2019 License: Apache-2.0 Imports: 6 Imported by: 0

Documentation

Overview

This MIB complements the CISCO-IETF-PW-MIB for PW operation over MPLS.

Index

Constants

This section is empty.

Variables

This section is empty.

Functions

This section is empty.

Types

type CISCOIETFPWMPLSMIB 

type CISCOIETFPWMPLSMIB struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter

	CpwVcMplsObjects CISCOIETFPWMPLSMIB_CpwVcMplsObjects

	// This table specifies information for VC to be carried over   MPLS PSN.
	CpwVcMplsTable CISCOIETFPWMPLSMIB_CpwVcMplsTable

	// This table associates VCs using MPLS PSN with the outbound  MPLS tunnels
	// (i.e. toward the PSN) or the physical   interface in case of VC only.
	CpwVcMplsOutboundTable CISCOIETFPWMPLSMIB_CpwVcMplsOutboundTable

	// This table associates VCs using MPLS PSN with the inbound  MPLS tunnels
	// (i.e. for packets coming from the PSN),   if such association is desired
	// (mainly for security   reasons).
	CpwVcMplsInboundTable CISCOIETFPWMPLSMIB_CpwVcMplsInboundTable

	// This table maps an inbound/outbound Tunnel to a VC in non-  TE
	// applications.
	CpwVcMplsNonTeMappingTable CISCOIETFPWMPLSMIB_CpwVcMplsNonTeMappingTable

	// This table maps an inbound/outbound Tunnel to a VC in   MPLS-TE
	// applications.
	CpwVcMplsTeMappingTable CISCOIETFPWMPLSMIB_CpwVcMplsTeMappingTable
}

CISCOIETFPWMPLSMIB

func (*CISCOIETFPWMPLSMIB) GetEntityData 

func (cISCOIETFPWMPLSMIB *CISCOIETFPWMPLSMIB) GetEntityData() *types.CommonEntityData

type CISCOIETFPWMPLSMIB_CpwVcMplsInboundTable 

type CISCOIETFPWMPLSMIB_CpwVcMplsInboundTable struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter

	// A row in this table represents a link between PW VCs (that  require MPLS
	// tunnels) and MPLS tunnel for packets arriving  from the PSN.  This table is
	// indexed by the set of indexes used to  identify the VC - cpwVcIndex and an
	// additional  index enabling multiple rows for the same VC index.   Note that
	// the first entry for each VC can be indexed by   cpwVcMplsOutboundIndex
	// equal zero without a need for   retrieval of cpwVcMplsInboundIndexNext.
	// An entry is created in this table either automatically by   the local agent
	// or created manually by the operator in   cases that strict mode is
	// required.   Note that the control messages contain VC ID and VC type,
	// which together with the remote IP address identify the  cpwVcIndex in the
	// local node.  This table points to the appropriate MPLS MIB. In the case
	// of MPLS-TE, the 4 variables relevant to the indexing of a  TE MPLS tunnel
	// are set as in Srinivasan, et al, <draft-  ietf-mpls-te-mib>.   In case of
	// non-TE MPLS tunnel (an outer tunnel label   assigned by LDP or manually)
	// the table points to the XC   entry in the MPLS-LSR-MIB as in Srinivasan, et
	// al, <draft-  ietf-mpls-lsr-mib>.   Each VC may have multiple rows in this
	// tables if protection   is available at the outer tunnel level, each row may
	// be of  different type except for VC only, on which only rows with  ifIndex
	// of the port are allowed. . The type is slice of
	// CISCOIETFPWMPLSMIB_CpwVcMplsInboundTable_CpwVcMplsInboundEntry.
	CpwVcMplsInboundEntry []*CISCOIETFPWMPLSMIB_CpwVcMplsInboundTable_CpwVcMplsInboundEntry
}

CISCOIETFPWMPLSMIB_CpwVcMplsInboundTable This table associates VCs using MPLS PSN with the inbound MPLS tunnels (i.e. for packets coming from the PSN), if such association is desired (mainly for security reasons).

func (*CISCOIETFPWMPLSMIB_CpwVcMplsInboundTable) GetEntityData 

func (cpwVcMplsInboundTable *CISCOIETFPWMPLSMIB_CpwVcMplsInboundTable) GetEntityData() *types.CommonEntityData

type CISCOIETFPWMPLSMIB_CpwVcMplsInboundTable_CpwVcMplsInboundEntry 

type CISCOIETFPWMPLSMIB_CpwVcMplsInboundTable_CpwVcMplsInboundEntry struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter
	YListKey   string

	// This attribute is a key. The type is string with range: 0..4294967295.
	// Refers to cisco_ietf_pw_mib.CISCOIETFPWMIB_CpwVcTable_CpwVcEntry_CpwVcIndex
	CpwVcIndex interface{}

	// This attribute is a key. Arbitrary index for enabling multiple rows per VC
	// in  this table. Next available free index can be retrieved  using
	// cpwVcMplsInboundIndexNext. . The type is interface{} with range:
	// 0..4294967295.
	CpwVcMplsInboundIndex interface{}

	// If the outer label is defined in the MPL-LSR-MIB, i.e. set   by LDP or
	// manually, this object points to the XC index   of the outer tunnel.
	// Otherwise, it is set to zero. The type is interface{} with range:
	// 0..4294967295.
	CpwVcMplsInboundLsrXcIndex interface{}

	// Part of set of indexes for outbound tunnel in the case of   MPLS-TE outer
	// tunnel, otherwise set to zero. The type is interface{} with range:
	// 0..65535.
	CpwVcMplsInboundTunnelIndex interface{}

	// Part of set of indexes for outbound tunnel in the case of   MPLS-TE outer
	// tunnel, otherwise set to zero. The type is interface{} with range:
	// 0..4294967295.
	CpwVcMplsInboundTunnelInstance interface{}

	// Part of set of indexes for outbound tunnel in the case of   MPLS-TE outer
	// tunnel, otherwise set to zero. The type is string with length: 4..4.
	CpwVcMplsInboundTunnelLclLSR interface{}

	// Part of set of indexes for outbound tunnel in the case of   MPLS-TE outer
	// tunnel, otherwise set to zero. The type is string with length: 4..4.
	CpwVcMplsInboundTunnelPeerLSR interface{}

	// In case of VC only (no outer tunnel), this object holds the  ifIndex of the
	// inbound port, otherwise set to zero. The type is interface{} with range:
	// 0..2147483647.
	CpwVcMplsInboundIfIndex interface{}

	// For creating, modifying, and deleting this row. The type is RowStatus.
	CpwVcMplsInboundRowStatus interface{}

	// This variable indicates the storage type for this row. The type is
	// StorageType.
	CpwVcMplsInboundStorageType interface{}
}

CISCOIETFPWMPLSMIB_CpwVcMplsInboundTable_CpwVcMplsInboundEntry A row in this table represents a link between PW VCs (that require MPLS tunnels) and MPLS tunnel for packets arriving from the PSN. This table is indexed by the set of indexes used to identify the VC - cpwVcIndex and an additional index enabling multiple rows for the same VC index.

Note that the first entry for each VC can be indexed by cpwVcMplsOutboundIndex equal zero without a need for retrieval of cpwVcMplsInboundIndexNext.

An entry is created in this table either automatically by the local agent or created manually by the operator in cases that strict mode is required.

Note that the control messages contain VC ID and VC type, which together with the remote IP address identify the cpwVcIndex in the local node. This table points to the appropriate MPLS MIB. In the case of MPLS-TE, the 4 variables relevant to the indexing of a TE MPLS tunnel are set as in Srinivasan, et al, <draft- ietf-mpls-te-mib>.

In case of non-TE MPLS tunnel (an outer tunnel label assigned by LDP or manually) the table points to the XC entry in the MPLS-LSR-MIB as in Srinivasan, et al, <draft- ietf-mpls-lsr-mib>.

Each VC may have multiple rows in this tables if protection is available at the outer tunnel level, each row may be of different type except for VC only, on which only rows with ifIndex of the port are allowed.

func (*CISCOIETFPWMPLSMIB_CpwVcMplsInboundTable_CpwVcMplsInboundEntry) GetEntityData 

func (cpwVcMplsInboundEntry *CISCOIETFPWMPLSMIB_CpwVcMplsInboundTable_CpwVcMplsInboundEntry) GetEntityData() *types.CommonEntityData

type CISCOIETFPWMPLSMIB_CpwVcMplsNonTeMappingTable 

type CISCOIETFPWMPLSMIB_CpwVcMplsNonTeMappingTable struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter

	// A row in this table represents the association  between the PW VC and it's
	// non TE MPLS outer Tunnel  it's physical interface if there is no outer
	// tunnel   (VC only).   An application can use this table to quickly retrieve
	// the   PW carried over specific non-TE MPLS outer tunnel or   physical
	// interface.   The table in indexed by the XC index for MPLS Non-TE   tunnel,
	// or ifIndex of the port in VC only case, the   direction of the VC in the
	// specific entry and the VCIndex.   The same table is used in both inbound
	// and outbound  directions, but in a different row for each direction. If
	// the inbound association is not known, no rows should exist   for it.   Rows
	// are created by the local agent when all the   association data is available
	// for display. The type is slice of
	// CISCOIETFPWMPLSMIB_CpwVcMplsNonTeMappingTable_CpwVcMplsNonTeMappingEntry.
	CpwVcMplsNonTeMappingEntry []*CISCOIETFPWMPLSMIB_CpwVcMplsNonTeMappingTable_CpwVcMplsNonTeMappingEntry
}

CISCOIETFPWMPLSMIB_CpwVcMplsNonTeMappingTable This table maps an inbound/outbound Tunnel to a VC in non- TE applications.

func (*CISCOIETFPWMPLSMIB_CpwVcMplsNonTeMappingTable) GetEntityData 

func (cpwVcMplsNonTeMappingTable *CISCOIETFPWMPLSMIB_CpwVcMplsNonTeMappingTable) GetEntityData() *types.CommonEntityData

type CISCOIETFPWMPLSMIB_CpwVcMplsNonTeMappingTable_CpwVcMplsNonTeMappingEntry 

type CISCOIETFPWMPLSMIB_CpwVcMplsNonTeMappingTable_CpwVcMplsNonTeMappingEntry struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter
	YListKey   string

	// This attribute is a key. Identifies if the row represent an outbound or
	// inbound   mapping. The type is CpwVcMplsNonTeMappingTunnelDirection.
	CpwVcMplsNonTeMappingTunnelDirection interface{}

	// This attribute is a key. Index for the conceptual XC row identifying Tunnel
	// to VC   mappings when the outer tunnel is created by the MPLS-LSR-  MIB,
	// Zero otherwise. The type is interface{} with range: 0..4294967295.
	CpwVcMplsNonTeMappingXcTunnelIndex interface{}

	// This attribute is a key. Identify the port on which the VC is carried for
	// VC only   case. The type is interface{} with range: 0..2147483647.
	CpwVcMplsNonTeMappingIfIndex interface{}

	// This attribute is a key. The value that represent the VC in the cpwVcTable.
	// The type is interface{} with range: 0..4294967295.
	CpwVcMplsNonTeMappingVcIndex interface{}
}

CISCOIETFPWMPLSMIB_CpwVcMplsNonTeMappingTable_CpwVcMplsNonTeMappingEntry A row in this table represents the association between the PW VC and it's non TE MPLS outer Tunnel it's physical interface if there is no outer tunnel (VC only).

An application can use this table to quickly retrieve the PW carried over specific non-TE MPLS outer tunnel or physical interface.

The table in indexed by the XC index for MPLS Non-TE tunnel, or ifIndex of the port in VC only case, the direction of the VC in the specific entry and the VCIndex.

The same table is used in both inbound and outbound directions, but in a different row for each direction. If the inbound association is not known, no rows should exist for it.

Rows are created by the local agent when all the association data is available for display.

func (*CISCOIETFPWMPLSMIB_CpwVcMplsNonTeMappingTable_CpwVcMplsNonTeMappingEntry) GetEntityData 

func (cpwVcMplsNonTeMappingEntry *CISCOIETFPWMPLSMIB_CpwVcMplsNonTeMappingTable_CpwVcMplsNonTeMappingEntry) GetEntityData() *types.CommonEntityData

type CISCOIETFPWMPLSMIB_CpwVcMplsNonTeMappingTable_CpwVcMplsNonTeMappingEntry_CpwVcMplsNonTeMappingTunnelDirection 

type CISCOIETFPWMPLSMIB_CpwVcMplsNonTeMappingTable_CpwVcMplsNonTeMappingEntry_CpwVcMplsNonTeMappingTunnelDirection string

CISCOIETFPWMPLSMIB_CpwVcMplsNonTeMappingTable_CpwVcMplsNonTeMappingEntry_CpwVcMplsNonTeMappingTunnelDirection represents mapping. 

const (
	CISCOIETFPWMPLSMIB_CpwVcMplsNonTeMappingTable_CpwVcMplsNonTeMappingEntry_CpwVcMplsNonTeMappingTunnelDirection_outbound CISCOIETFPWMPLSMIB_CpwVcMplsNonTeMappingTable_CpwVcMplsNonTeMappingEntry_CpwVcMplsNonTeMappingTunnelDirection = "outbound"

	CISCOIETFPWMPLSMIB_CpwVcMplsNonTeMappingTable_CpwVcMplsNonTeMappingEntry_CpwVcMplsNonTeMappingTunnelDirection_inbound CISCOIETFPWMPLSMIB_CpwVcMplsNonTeMappingTable_CpwVcMplsNonTeMappingEntry_CpwVcMplsNonTeMappingTunnelDirection = "inbound"
)

type CISCOIETFPWMPLSMIB_CpwVcMplsObjects 

type CISCOIETFPWMPLSMIB_CpwVcMplsObjects struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter

	// This object contains an appropriate value to  be used for
	// cpwVcMplsOutboundIndex when creating  entries in the
	// cpwVcMplsOutboundTable. The value  0 indicates that no unassigned entries
	// are  available. To obtain the cpwVcMplsOutboundIndex  value for a new
	// entry, the manager issues a  management protocol retrieval operation to
	// obtain  the current value of this object.  After each  retrieval, the agent
	// should modify the value to  the next unassigned index, however the agent
	// MUST  NOT assume such retrieval will be done for each   row created. The
	// type is interface{} with range: 0..4294967295.
	CpwVcMplsOutboundIndexNext interface{}

	// This object contains an appropriate value to  be used for
	// cpwVcMplsInboundIndex when creating  entries in the cpwVcMplsInboundTable.
	// The value  0 indicates that no unassigned entries are  available. To obtain
	// the cpwVcMplsInboundIndex  value for a new entry, the manager issues a
	// management protocol retrieval operation to obtain  the current value of
	// this object.  After each  retrieval, the agent should modify the value to
	// the next unassigned index, however the agent MUST  NOT assume such
	// retrieval will be done for each   row created. The type is interface{} with
	// range: 0..4294967295.
	CpwVcMplsInboundIndexNext interface{}
}

CISCOIETFPWMPLSMIB_CpwVcMplsObjects

func (*CISCOIETFPWMPLSMIB_CpwVcMplsObjects) GetEntityData 

func (cpwVcMplsObjects *CISCOIETFPWMPLSMIB_CpwVcMplsObjects) GetEntityData() *types.CommonEntityData

type CISCOIETFPWMPLSMIB_CpwVcMplsOutboundTable 

type CISCOIETFPWMPLSMIB_CpwVcMplsOutboundTable struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter

	// A row in this table represents a link between PW VC (that  require MPLS
	// tunnels) and MPLS tunnel toward the PSN.  In the case of VC only, it
	// associate the VC with the   interface that shall carry the VC.  This table
	// is indexed by the pwVcIndex and an additional  index enabling multiple rows
	// for the same VC index.   At least one entry is created in this table by the
	// operator   for each PW VC that requires MPLS PSN. Note that the first
	// entry for each VC can be indexed by cpwVcMplsOutboundIndex   equal zero
	// without a need for retrieval of   cpwVcMplsOutboundIndexNext.   This table
	// points to the appropriate MPLS MIB. In the case   of MPLS-TE, the 4
	// variables relevant to the indexing of   a TE MPLS tunnel are set as in
	// Srinivasan, et al, <draft-  ietf-mpls-te-mib>.  In case of Non-TE MPLS (an
	// outer tunnel label assigned by   LDP or manually) the table points to the
	// XC entry in the   LSR MIB as in Srinivasan, et al,
	// <draft-ietf-mpls-lsr-mib>.  In case of VC only (no outer tunnel) the
	// ifIndex of the  port to carry the VC is configured.    Each VC may have
	// multiple rows in this tables if protection   is available at the outer
	// tunnel level, each row may be of  different type except for VC only, on
	// which only rows with  ifIndex of the port are allowed. . The type is slice
	// of CISCOIETFPWMPLSMIB_CpwVcMplsOutboundTable_CpwVcMplsOutboundEntry.
	CpwVcMplsOutboundEntry []*CISCOIETFPWMPLSMIB_CpwVcMplsOutboundTable_CpwVcMplsOutboundEntry
}

CISCOIETFPWMPLSMIB_CpwVcMplsOutboundTable This table associates VCs using MPLS PSN with the outbound MPLS tunnels (i.e. toward the PSN) or the physical interface in case of VC only.

func (*CISCOIETFPWMPLSMIB_CpwVcMplsOutboundTable) GetEntityData 

func (cpwVcMplsOutboundTable *CISCOIETFPWMPLSMIB_CpwVcMplsOutboundTable) GetEntityData() *types.CommonEntityData

type CISCOIETFPWMPLSMIB_CpwVcMplsOutboundTable_CpwVcMplsOutboundEntry 

type CISCOIETFPWMPLSMIB_CpwVcMplsOutboundTable_CpwVcMplsOutboundEntry struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter
	YListKey   string

	// This attribute is a key. The type is string with range: 0..4294967295.
	// Refers to cisco_ietf_pw_mib.CISCOIETFPWMIB_CpwVcTable_CpwVcEntry_CpwVcIndex
	CpwVcIndex interface{}

	// This attribute is a key. Arbitrary index for enabling multiple rows per VC
	// in  this table. Next available free index can be retrieved   using
	// cpwVcMplsOutboundIndexNext. . The type is interface{} with range:
	// 0..4294967295.
	CpwVcMplsOutboundIndex interface{}

	// This object will be set by the operator. If the outer  label is defined in
	// the MPL-LSR-MIB, i.e. set by LDP  or manually, this object points to the XC
	// index   of the outer tunnel. Otherwise, it is set to zero. The type is
	// interface{} with range: 0..4294967295.
	CpwVcMplsOutboundLsrXcIndex interface{}

	// Part of set of indexes for outbound tunnel in the case of   MPLS-TE outer
	// tunnel, otherwise set to zero. The type is interface{} with range:
	// 0..65535.
	CpwVcMplsOutboundTunnelIndex interface{}

	// Part of set of indexes for outbound tunnel in the case of   MPLS-TE outer
	// tunnel, otherwise set to zero. The type is interface{} with range:
	// 0..4294967295.
	CpwVcMplsOutboundTunnelInstance interface{}

	// Part of set of indexes for outbound tunnel in the case of   MPLS-TE outer
	// tunnel, otherwise set to zero. The type is string with length: 4..4.
	CpwVcMplsOutboundTunnelLclLSR interface{}

	// Part of set of indexes for outbound tunnel in the case of   MPLS-TE outer
	// tunnel, otherwise set to zero. The type is string with length: 4..4.
	CpwVcMplsOutboundTunnelPeerLSR interface{}

	// In case of VC only (no outer tunnel), this object holds  the ifIndex of the
	// outbound port, otherwise set to zero. The type is interface{} with range:
	// 0..2147483647.
	CpwVcMplsOutboundIfIndex interface{}

	// For creating, modifying, and deleting this row. The type is RowStatus.
	CpwVcMplsOutboundRowStatus interface{}

	// This variable indicates the storage type for this object. The type is
	// StorageType.
	CpwVcMplsOutboundStorageType interface{}
}

CISCOIETFPWMPLSMIB_CpwVcMplsOutboundTable_CpwVcMplsOutboundEntry A row in this table represents a link between PW VC (that require MPLS tunnels) and MPLS tunnel toward the PSN. In the case of VC only, it associate the VC with the interface that shall carry the VC. This table is indexed by the pwVcIndex and an additional index enabling multiple rows for the same VC index.

At least one entry is created in this table by the operator for each PW VC that requires MPLS PSN. Note that the first entry for each VC can be indexed by cpwVcMplsOutboundIndex equal zero without a need for retrieval of cpwVcMplsOutboundIndexNext.

This table points to the appropriate MPLS MIB. In the case of MPLS-TE, the 4 variables relevant to the indexing of a TE MPLS tunnel are set as in Srinivasan, et al, <draft- ietf-mpls-te-mib>. In case of Non-TE MPLS (an outer tunnel label assigned by LDP or manually) the table points to the XC entry in the LSR MIB as in Srinivasan, et al, <draft-ietf-mpls-lsr-mib>. In case of VC only (no outer tunnel) the ifIndex of the port to carry the VC is configured.

Each VC may have multiple rows in this tables if protection is available at the outer tunnel level, each row may be of different type except for VC only, on which only rows with ifIndex of the port are allowed.

func (*CISCOIETFPWMPLSMIB_CpwVcMplsOutboundTable_CpwVcMplsOutboundEntry) GetEntityData 

func (cpwVcMplsOutboundEntry *CISCOIETFPWMPLSMIB_CpwVcMplsOutboundTable_CpwVcMplsOutboundEntry) GetEntityData() *types.CommonEntityData

type CISCOIETFPWMPLSMIB_CpwVcMplsTable 

type CISCOIETFPWMPLSMIB_CpwVcMplsTable struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter

	// A row in this table represents parameters specific to MPLS   PSN for a
	// pseudo wire connection (VC). The row is created   automatically by the
	// local agent if the cpwVcPsnType is   MPLS. It is indexed by cpwVcIndex,
	// which uniquely   identifying a singular connection. . The type is slice of
	// CISCOIETFPWMPLSMIB_CpwVcMplsTable_CpwVcMplsEntry.
	CpwVcMplsEntry []*CISCOIETFPWMPLSMIB_CpwVcMplsTable_CpwVcMplsEntry
}

CISCOIETFPWMPLSMIB_CpwVcMplsTable This table specifies information for VC to be carried over MPLS PSN.

func (*CISCOIETFPWMPLSMIB_CpwVcMplsTable) GetEntityData 

func (cpwVcMplsTable *CISCOIETFPWMPLSMIB_CpwVcMplsTable) GetEntityData() *types.CommonEntityData

type CISCOIETFPWMPLSMIB_CpwVcMplsTable_CpwVcMplsEntry 

type CISCOIETFPWMPLSMIB_CpwVcMplsTable_CpwVcMplsEntry struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter
	YListKey   string

	// This attribute is a key. The type is string with range: 0..4294967295.
	// Refers to cisco_ietf_pw_mib.CISCOIETFPWMIB_CpwVcTable_CpwVcEntry_CpwVcIndex
	CpwVcIndex interface{}

	// Set by the operator to indicate the outer tunnel types, if  exists. mplsTe
	// is used if the outer tunnel was set-up by   MPLS-TE, and mplsNonTe is used
	// the outer tunnel was set up  by LDP or manually. Combination of mplsTe and
	// mplsNonTe   may exist in case of outer tunnel protection.  vcOnly is used
	// if there is no outer tunnel label. vcOnly   cannot be combined with
	// mplsNonTe or mplsTe. The type is map[string]bool.
	CpwVcMplsMplsType interface{}

	// Set by the operator to indicate the way the VC shim label  EXP bits are to
	// be determined. The value of outerTunnel(1)  is used where there is an outer
	// tunnel - cpwVcMplsMplsType   is mplsTe or mplsNonTe. Note that in this case
	// there is no  need to mark the VC label with the EXP bits since the VC
	// label is not visible to the intermediate nodes.  If there is no outer
	// tunnel, specifiedValue(2) indicate   that the value is specified by
	// cpwVcMplsExpBits, and   serviceDependant(3) indicate that the EXP bits are
	// setup   based on a rule specified in the emulated service specific
	// tables, for example when the EXP bits are a function of   802.1p marking
	// for Ethernet emulated service. The type is CpwVcMplsExpBitsMode.
	CpwVcMplsExpBitsMode interface{}

	// Set by the operator to indicate the MPLS EXP bits to be   used on the VC
	// shim label if cpwVcMplsExpBitsMode is    specifiedValue(2), zero otherwise.
	// The type is interface{} with range: 0..7.
	CpwVcMplsExpBits interface{}

	// Set by the operator to indicate the VC TTL bits to be used  on the VC shim
	// label. The type is interface{} with range: 0..255.
	CpwVcMplsTtl interface{}

	// The local LDP identifier of the LDP entity creating  this VC in the local
	// node. As the VC labels are always  set from the per platform label space,
	// the last two octets   in the LDP ID MUST be always both zeros. The type is
	// string.
	CpwVcMplsLocalLdpID interface{}

	// The local LDP Entity index of the LDP entity to be used   for this VC on
	// the local node. Should be set to all zeros   if not used. The type is
	// interface{} with range: 0..4294967295.
	CpwVcMplsLocalLdpEntityID interface{}

	// The peer LDP identifier as identified from the LDP   session. Should be
	// zero if not relevant or not known yet. The type is string.
	CpwVcMplsPeerLdpID interface{}

	// This variable indicates the storage type for this row. The type is
	// StorageType.
	CpwVcMplsStorageType interface{}
}

CISCOIETFPWMPLSMIB_CpwVcMplsTable_CpwVcMplsEntry A row in this table represents parameters specific to MPLS PSN for a pseudo wire connection (VC). The row is created automatically by the local agent if the cpwVcPsnType is MPLS. It is indexed by cpwVcIndex, which uniquely identifying a singular connection.

func (*CISCOIETFPWMPLSMIB_CpwVcMplsTable_CpwVcMplsEntry) GetEntityData 

func (cpwVcMplsEntry *CISCOIETFPWMPLSMIB_CpwVcMplsTable_CpwVcMplsEntry) GetEntityData() *types.CommonEntityData

type CISCOIETFPWMPLSMIB_CpwVcMplsTable_CpwVcMplsEntry_CpwVcMplsExpBitsMode 

type CISCOIETFPWMPLSMIB_CpwVcMplsTable_CpwVcMplsEntry_CpwVcMplsExpBitsMode string

CISCOIETFPWMPLSMIB_CpwVcMplsTable_CpwVcMplsEntry_CpwVcMplsExpBitsMode represents 802.1p marking for Ethernet emulated service. 

const (
	CISCOIETFPWMPLSMIB_CpwVcMplsTable_CpwVcMplsEntry_CpwVcMplsExpBitsMode_outerTunnel CISCOIETFPWMPLSMIB_CpwVcMplsTable_CpwVcMplsEntry_CpwVcMplsExpBitsMode = "outerTunnel"

	CISCOIETFPWMPLSMIB_CpwVcMplsTable_CpwVcMplsEntry_CpwVcMplsExpBitsMode_specifiedValue CISCOIETFPWMPLSMIB_CpwVcMplsTable_CpwVcMplsEntry_CpwVcMplsExpBitsMode = "specifiedValue"

	CISCOIETFPWMPLSMIB_CpwVcMplsTable_CpwVcMplsEntry_CpwVcMplsExpBitsMode_serviceDependant CISCOIETFPWMPLSMIB_CpwVcMplsTable_CpwVcMplsEntry_CpwVcMplsExpBitsMode = "serviceDependant"
)

type CISCOIETFPWMPLSMIB_CpwVcMplsTeMappingTable 

type CISCOIETFPWMPLSMIB_CpwVcMplsTeMappingTable struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter

	// A row in this table represents the association  between a PW VC and it's
	// MPLS-TE outer Tunnel.   An application can use this table to quickly
	// retrieve the   PW carried over specific TE MPLS outer tunnel.   The table
	// in indexed by the 4 indexes of a TE tunnel,  the direction of the VC
	// specific entry and the VcIndex.   The same table is used in both inbound
	// and outbound  directions, a different row for each direction. If the
	// inbound association is not known, no rows should exist for   it.   Rows are
	// created by the local agent when all the   association data is available for
	// display. The type is slice of
	// CISCOIETFPWMPLSMIB_CpwVcMplsTeMappingTable_CpwVcMplsTeMappingEntry.
	CpwVcMplsTeMappingEntry []*CISCOIETFPWMPLSMIB_CpwVcMplsTeMappingTable_CpwVcMplsTeMappingEntry
}

CISCOIETFPWMPLSMIB_CpwVcMplsTeMappingTable This table maps an inbound/outbound Tunnel to a VC in MPLS-TE applications.

func (*CISCOIETFPWMPLSMIB_CpwVcMplsTeMappingTable) GetEntityData 

func (cpwVcMplsTeMappingTable *CISCOIETFPWMPLSMIB_CpwVcMplsTeMappingTable) GetEntityData() *types.CommonEntityData

type CISCOIETFPWMPLSMIB_CpwVcMplsTeMappingTable_CpwVcMplsTeMappingEntry 

type CISCOIETFPWMPLSMIB_CpwVcMplsTeMappingTable_CpwVcMplsTeMappingEntry struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter
	YListKey   string

	// This attribute is a key. Identifies if the row represent an outbound or
	// inbound   mapping. The type is CpwVcMplsTeMappingTunnelDirection.
	CpwVcMplsTeMappingTunnelDirection interface{}

	// This attribute is a key. Primary index for the conceptual row identifying
	// the   MPLS-TE tunnel. The type is interface{} with range: 0..65535.
	CpwVcMplsTeMappingTunnelIndex interface{}

	// This attribute is a key. Identifies an instance of the MPLS-TE tunnel. The
	// type is interface{} with range: 0..4294967295.
	CpwVcMplsTeMappingTunnelInstance interface{}

	// This attribute is a key. Identifies an Peer LSR when the outer tunnel is
	// MPLS-TE   based. The type is string with length: 4..4.
	CpwVcMplsTeMappingTunnelPeerLsrID interface{}

	// This attribute is a key. Identifies the local LSR. The type is string with
	// length: 4..4.
	CpwVcMplsTeMappingTunnelLocalLsrID interface{}

	// This attribute is a key. The value that represent the VC in the cpwVcTable.
	// The type is interface{} with range: 0..4294967295.
	CpwVcMplsTeMappingVcIndex interface{}
}

CISCOIETFPWMPLSMIB_CpwVcMplsTeMappingTable_CpwVcMplsTeMappingEntry A row in this table represents the association between a PW VC and it's MPLS-TE outer Tunnel.

An application can use this table to quickly retrieve the PW carried over specific TE MPLS outer tunnel.

The table in indexed by the 4 indexes of a TE tunnel, the direction of the VC specific entry and the VcIndex.

The same table is used in both inbound and outbound directions, a different row for each direction. If the inbound association is not known, no rows should exist for it.

Rows are created by the local agent when all the association data is available for display.

func (*CISCOIETFPWMPLSMIB_CpwVcMplsTeMappingTable_CpwVcMplsTeMappingEntry) GetEntityData 

func (cpwVcMplsTeMappingEntry *CISCOIETFPWMPLSMIB_CpwVcMplsTeMappingTable_CpwVcMplsTeMappingEntry) GetEntityData() *types.CommonEntityData

type CISCOIETFPWMPLSMIB_CpwVcMplsTeMappingTable_CpwVcMplsTeMappingEntry_CpwVcMplsTeMappingTunnelDirection 

type CISCOIETFPWMPLSMIB_CpwVcMplsTeMappingTable_CpwVcMplsTeMappingEntry_CpwVcMplsTeMappingTunnelDirection string

CISCOIETFPWMPLSMIB_CpwVcMplsTeMappingTable_CpwVcMplsTeMappingEntry_CpwVcMplsTeMappingTunnelDirection represents mapping. 

const (
	CISCOIETFPWMPLSMIB_CpwVcMplsTeMappingTable_CpwVcMplsTeMappingEntry_CpwVcMplsTeMappingTunnelDirection_outbound CISCOIETFPWMPLSMIB_CpwVcMplsTeMappingTable_CpwVcMplsTeMappingEntry_CpwVcMplsTeMappingTunnelDirection = "outbound"

	CISCOIETFPWMPLSMIB_CpwVcMplsTeMappingTable_CpwVcMplsTeMappingEntry_CpwVcMplsTeMappingTunnelDirection_inbound CISCOIETFPWMPLSMIB_CpwVcMplsTeMappingTable_CpwVcMplsTeMappingEntry_CpwVcMplsTeMappingTunnelDirection = "inbound"
)

Source Files

View all Source files

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL
go.dev uses cookies from Google to deliver and enhance the quality of its services and to analyze traffic. Learn more.