itf

package
v1.3.1 Latest Latest
Warning

This package is not in the latest version of its module.

 Go to latest Published: Nov 27, 2024 License: GPL-3.0 Imports: 9 Imported by: 4

Documentation

Index

Constants

View Source 
const (
	DeviceFlagVisible = 1 << iota
	DeviceFlagInternal

	DeviceFlagNotDeletable
)
View Source 
const (
	DeviceDirectionNone = iota
	DeviceDirectionSender
	DeviceDirectionReceiver
)
View Source 
const (
	DeviceRXModeAlways = 1 << iota
	DeviceRXModeBurst
	DeviceRXModeConfig
	DeviceRXModeWakeUp
	DeviceRXModeLazyConfig
)
View Source 
const (
	ParameterTypeFloat   = "FLOAT"
	ParameterTypeInteger = "INTEGER"
	ParameterTypeBool    = "BOOL"
	ParameterTypeEnum    = "ENUM"
	ParameterTypeString  = "STRING"
	ParameterTypeAction  = "ACTION"
)
View Source 
const (
	ParameterOperationRead = 1 << iota
	ParameterOperationWrite
	ParameterOperationEvent
)
View Source 
const (
	ParameterFlagVisible = 1 << iota
	ParameterFlagInternal
	ParameterFlagTransform
	ParameterFlagService
	ParameterFlagSticky
)

Variables

This section is empty.

Functions

func SplitAddress added in v0.3.0 

func SplitAddress(address string) (deviceAddress string, channelAddress string)

SplitAddress splits a full address into device and channel part.

Types

type DeviceDescription 

type DeviceDescription struct {
	Type              string
	Address           string
	RFAddress         int
	Children          []string
	Parent            string
	ParentType        string
	Index             int
	AESActive         int
	Paramsets         []string
	Firmware          string
	AvailableFirmware string
	Version           int

	// Flags is a bit mask for the presentation in the UI.
	// 0x01: visible for user
	// 0x02: internal (not visible)
	// 0x08: object not deleteable
	Flags int

	LinkSourceRoles string
	LinkTargetRoles string

	// Direction of a direct channel connection.
	// 0: none (direct connection not supported)
	// 1: sender
	// 2: receiver
	Direction int

	Group        string
	Team         string
	TeamTag      string
	TeamChannels []string
	Interface    string
	Roaming      int

	// RXMode is a bit mask of the receive modes.
	// 0x01: always
	// 0x02: burst (wake on radio)
	// 0x04: config (reachable after pressing config button)
	// 0x08: wakeup (after communication with the CCU)
	// 0x10: lazy config (config mode after normal use, e.g. key press)
	RXMode int
}

DeviceDescription describes a HomeMatic device.

func (*DeviceDescription) ReadFrom 

func (d *DeviceDescription) ReadFrom(e *xmlrpc.Query)

ReadFrom reads the field values from an xmlrpc.Query.

func (*DeviceDescription) ToValue added in v0.3.0 

func (d *DeviceDescription) ToValue() *xmlrpc.Value

ToValue returns an xmlrpc.Value for this device description.

type DeviceLayer added in v0.3.0 

type DeviceLayer interface {
	// Init registers a new logic layer. The receiverAddress should have the
	// format protocol://hostname[:port][/Path]. If the second parameter is
	// omitted, the call is redirected to Deinit.
	Init(receiverAddress, interfaceID string) error

	// Deinit unregisters a logic layer. Init redirects the call to this
	// function, if the second parameter is ommited. This method is not exposed
	// over XML-RPC.
	Deinit(receiverAddress string) error

	// This method returns all devices known to the interface process in the
	// form of device descriptions.
	ListDevices() ([]*DeviceDescription, error)

	// This method deletes a device from the interface process.
	//
	// Flags:
	//   0x01=DELETE_FLAG_RESET
	//   0x02=DELETE_FLAG_FORCE
	//   0x04=DELETE_FLAG_DEFER
	DeleteDevice(deviceAddress string, flags int) error

	// This method returns the device description of the device passed as
	// deviceAddress.
	GetDeviceDescription(deviceAddress string) (*DeviceDescription, error)

	// This method is used to determine the description of a parameter set. The
	// parameter deviceAddress is the address of a logical device (e.g. returned
	// by ListDevices). The parameter paramsetType is "MASTER", "VALUES" or
	// "LINK".
	GetParamsetDescription(deviceAddress, paramsetType string) (ParamsetDescription, error)

	// This method reads a complete parameter set for a logical device. The
	// parameter deviceAddress is the address of a logical device. The parameter
	// paramsetKey is "MASTER" or "VALUES".
	GetParamset(deviceAddress string, paramsetKey string) (map[string]interface{}, error)

	// This method is used to write a complete parameter set for a logical
	// device. The parameter address is the address of a logical device. The
	// parameter paramsetKey is "MASTER" or "VALUES". Members not present in
	// values are simply not written and keep their old value.
	PutParamset(deviceAddress string, paramsetType string, paramset map[string]interface{}) error

	// This method is used to write a single value from the "VALUES" parameter
	// set. The parameter deviceAddress is the address of a logical device. The
	// parameter valueName is the name of the value to be written. The possible
	// values for valueName are taken from the ParamsetDescription of the
	// corresponding parameter set "VALUES". The value parameter is the value to
	// be written.
	SetValue(deviceAddress string, valueName string, value interface{}) error

	// This method reads a single value from the "VALUES" parameter set. The
	// parameter deviceAddress is the address of a logical device. The parameter
	// valueName is the name of the value to be read. The possible values for
	// valueName are derived from the ParamsetDescription of the corresponding
	// parameter set "VALUES".
	GetValue(deviceAddress string, valueName string) (interface{}, error)

	// When calling this function an event (called PONG in the following) is
	// generated and sent to all registered logic layers. Since the PONG event
	// is sent to all registered all registered logic layers (as with all other
	// events), one logic layer must expect to receive a logic layer must expect
	// to receive a PONG event without having previously called ping beforehand.
	//
	// The parameter callerId must be passed by the caller and is used as the
	// value of the PONG event. The content of the string is irrelevant. If no
	// exception occurs during processing, the method returns true is returned.
	//
	// The PONG event is delivered via the event method of the logic layer. The
	// address is CENTRAL", the key is "PONG" and the value is the callerId
	// passed in the ping call. passed in the ping call.
	Ping(callerID string) (bool, error)
}

A DeviceLayer is the API of a device interface process.

type DeviceLayerClient added in v0.3.0 

type DeviceLayerClient struct {
	Name string
	xmlrpc.Caller
}

DeviceLayerClient provides access to the HomeMatic XML-RPC API of the device layer.

func (*DeviceLayerClient) Deinit added in v0.3.0 

func (c *DeviceLayerClient) Deinit(receiverAddress string) error

Deinit deregisters an interface. The receiverAddress should match with Init.

func (*DeviceLayerClient) DeleteDevice added in v0.3.0 

func (c *DeviceLayerClient) DeleteDevice(deviceAddress string, flags int) error

DeleteDevice deletes a device.

func (*DeviceLayerClient) GetDeviceDescription added in v0.3.0 

func (c *DeviceLayerClient) GetDeviceDescription(deviceAddress string) (*DeviceDescription, error)

GetDeviceDescription retrieves the device description for the specified device.

func (*DeviceLayerClient) GetParamset added in v0.3.0 

func (c *DeviceLayerClient) GetParamset(deviceAddress string, paramsetType string) (map[string]interface{}, error)

GetParamset retrieves the specified parameter set.

func (*DeviceLayerClient) GetParamsetDescription added in v0.3.0 

func (c *DeviceLayerClient) GetParamsetDescription(deviceAddress string, paramsetType string) (ParamsetDescription, error)

GetParamsetDescription retrieves the paramset description from a device.

func (*DeviceLayerClient) GetValue added in v0.3.0 

func (c *DeviceLayerClient) GetValue(deviceAddress string, valueName string) (interface{}, error)

GetValue gets a single value from the parameter set VALUES.

func (*DeviceLayerClient) Init added in v0.3.0 

func (c *DeviceLayerClient) Init(receiverAddress, id string) error

Init registers a new interface. The receiverAddress should have the format http://hostname[:port][/Path]. If the path is not specified, the CCU will use /RPC2.

func (*DeviceLayerClient) ListDevices added in v0.3.0 

func (c *DeviceLayerClient) ListDevices() ([]*DeviceDescription, error)

ListDevices retrieves the device descriptions from all devices.

func (*DeviceLayerClient) Ping added in v0.3.0 

func (c *DeviceLayerClient) Ping(callerID string) (bool, error)

Ping triggers a pong event. Returns true on success.

func (*DeviceLayerClient) PutParamset added in v0.3.0 

func (c *DeviceLayerClient) PutParamset(deviceAddress string, paramsetType string, paramset map[string]interface{}) error

PutParamset writes the parameter set.

func (*DeviceLayerClient) SetValue added in v0.3.0 

func (c *DeviceLayerClient) SetValue(deviceAddress string, valueName string, value interface{}) error

SetValue sets a single value from the parameter set VALUES.

type Dispatcher added in v0.2.2 

type Dispatcher struct {
	xmlrpc.BasicDispatcher
}

Dispatcher is an extended xmlrpc.Dispatcher for HM.

func NewDispatcher added in v0.1.2 

func NewDispatcher() *Dispatcher

NewDispatcher creates a new Dispatcher with HM specific RPC functions.

func (*Dispatcher) AddDeviceLayer added in v0.3.0 

func (d *Dispatcher) AddDeviceLayer(dl DeviceLayer)

AddDeviceLayer adds handlers for a device layer.

func (*Dispatcher) AddLogicLayer added in v0.2.2 

func (d *Dispatcher) AddLogicLayer(ll LogicLayer)

AddLogicLayer adds handlers for a logic layer. After calling init on BidCos-RF normally following callbacks happen: system.listMethods, listDevices, newDevices and system.multicall with event's. Attention: listDevices is not forwarded to the receiver and returns always an empty device list to the interface process.

type Interconnector 

type Interconnector struct {
	CCUAddr  string
	Types    Types
	IDPrefix string
	ServeErr chan<- error
	// for callbacks from CCU interface processes
	HostAddr   string
	ServerURL  string
	XMLRPCPort int
	BINRPCPort int
	// the Logiclayer receives the callbacks
	LogicLayer LogicLayer
	// contains filtered or unexported fields
}

Interconnector gives access to the CCU data model and current data point values.

func (*Interconnector) Client 

func (i *Interconnector) Client(regID string) (*RegisteredClient, error)

Client returns the specified interface client.

func (*Interconnector) DeleteDevices 

func (i *Interconnector) DeleteDevices(interfaceID string, addresses []string) error

DeleteDevices implements interface hmccu.Receiver.

func (*Interconnector) Event 

func (i *Interconnector) Event(interfaceID, address, valueKey string, value interface{}) error

Event implements interface hmccu.Receiver.

func (*Interconnector) NewDevices 

func (i *Interconnector) NewDevices(interfaceID string, devDescriptions []*DeviceDescription) error

NewDevices implements interface hmccu.Receiver.

func (*Interconnector) ReaddedDevice 

func (i *Interconnector) ReaddedDevice(interfaceID string, deletedAddresses []string) error

ReaddedDevice implements interface hmccu.Receiver.

func (*Interconnector) ReplaceDevice 

func (i *Interconnector) ReplaceDevice(interfaceID, oldDeviceAddress, newDeviceAddress string) error

ReplaceDevice implements interface hmccu.Receiver.

func (*Interconnector) Start 

func (i *Interconnector) Start()

Start connects to the CCU and starts querying model and values. An additional handler for XMLRPC ist registered at the DefaultServeMux.

func (*Interconnector) Stop 

func (i *Interconnector) Stop()

Stop disconnects from the CCU and releases ressources.

func (*Interconnector) UpdateDevice 

func (i *Interconnector) UpdateDevice(interfaceID, address string, hint int) error

UpdateDevice implements interface hmccu.Receiver.

type LogicLayer added in v0.2.2 

type LogicLayer interface {
	// A value has changed.
	Event(interfaceID, address, valueKey string, value interface{}) error

	// Devices are added.
	NewDevices(interfaceID string, devDescriptions []*DeviceDescription) error

	// Devices are deleted.
	DeleteDevices(interfaceID string, addresses []string) error

	// A device or channels has changed. hint=0: any changes; hint=1: number of
	// links changed
	UpdateDevice(interfaceID, address string, hint int) error

	// A device was replaced.
	ReplaceDevice(interfaceID, oldDeviceAddress, newDeviceAddress string) error

	// ReaddedDevice is called, when an already connected device is paired again
	// with the CCU. Deleted logical devices are listed in deletedAddresses.
	ReaddedDevice(interfaceID string, deletedAddresses []string) error
}

A LogicLayer handles notifications from a device interface processes (of the CCU).

type LogicLayerClient added in v0.3.0 

type LogicLayerClient struct {
	Name string
	xmlrpc.Caller
}

LogicLayerClient provides access to the HomeMatic XML-RPC API of the logic layer.

func (*LogicLayerClient) DeleteDevices added in v0.3.0 

func (c *LogicLayerClient) DeleteDevices(interfaceID string, addresses []string) error

DeleteDevices delete devicess from the logic layer.

func (*LogicLayerClient) Event added in v0.3.0 

func (c *LogicLayerClient) Event(interfaceID, address, valueKey string, value interface{}) error

Event sends an event.

func (*LogicLayerClient) ListDevices added in v0.3.0 

func (c *LogicLayerClient) ListDevices(interfaceID string) ([]*DeviceDescription, error)

ListDevices retrieves the device descriptions from all devices.

func (*LogicLayerClient) NewDevices added in v0.3.0 

func (c *LogicLayerClient) NewDevices(interfaceID string, devDescriptions []*DeviceDescription) error

NewDevices adds devices to the logic layer.

type ParameterDescription 

type ParameterDescription struct {
	// FLOAT, INTEGER, BOOL, ENUM, STRING, ACTION
	Type string

	// Bit field: 0x01=Read, 0x02=Write, 0x04=Event
	Operations int

	// Bit field: 0x01=Visible, 0x02=Internal, 0x04=Transform, 0x08=Service, 0x10=Sticky
	Flags int

	Default  interface{}
	Max      interface{}
	Min      interface{}
	Unit     string
	TabOrder int
	Control  string
	ID       string

	// Only for type FLOAT or INTEGER
	Special []SpecialValue

	// Only for type ENUM
	ValueList []string
}

ParameterDescription describes a single parameter.

func (*ParameterDescription) ReadFrom 

func (p *ParameterDescription) ReadFrom(e *xmlrpc.Query)

ReadFrom reads the field values from an xmlrpc.Query.

func (*ParameterDescription) ToValue added in v0.3.0 

func (p *ParameterDescription) ToValue() (*xmlrpc.Value, error)

ToValue returns an xmlrpc.Value for this device description.

type ParamsetDescription 

type ParamsetDescription map[string]*ParameterDescription

ParamsetDescription describes a parameter set (e.g. VALUES) of a device.

func (ParamsetDescription) ReadFrom added in v0.3.0 

func (ps ParamsetDescription) ReadFrom(q *xmlrpc.Query)

ReadFrom reads the field values from an xmlrpc.Query.

func (ParamsetDescription) ToValue added in v0.3.0 

func (ps ParamsetDescription) ToValue() (*xmlrpc.Value, error)

ToValue returns an xmlrpc.Value for this paramset description.

type RegisteredClient 

type RegisteredClient struct {
	*DeviceLayerClient
	RegistrationURL string
	RegistrationID  string
	ReGaHssID       string
	// contains filtered or unexported fields
}

RegisteredClient provides access to a CCU interface process. The registration state is monitored and reestablished on time out.

func (*RegisteredClient) CallbackReceived 

func (i *RegisteredClient) CallbackReceived()

CallbackReceived must be called, when a callback from the CCU is received. The call is always non-blocking. Startup must be called first.

func (*RegisteredClient) Setup 

func (i *RegisteredClient) Setup()

Setup initializes the RegisteredClient.

func (*RegisteredClient) Start 

func (i *RegisteredClient) Start()

Start registers at the CCU interface process and starts monitoring.

func (*RegisteredClient) Stop 

func (i *RegisteredClient) Stop()

Stop stops the registration and monitoring.

type SpecialValue added in v0.2.3 

type SpecialValue struct {
	ID    string
	Value interface{}
}

SpecialValue defines a special value für an INTEGER or FLOAT. Value must be of type int or float64.

type Type 

type Type int

Type is the type of a CCU interface (BidCos-RF, HmIP-RF, ...). 

const (
	// CCU1 or CCU2/3 with HMW-LGW
	BidCosWired Type = iota
	// CCU1/2/3, RaspberryMatic with RF module or HM-LGW
	BidCosRF
	// CCU1
	System
	// CCU2/3, RaspberryMatic with RF module
	HmIPRF
	// CCU2/3, RaspberryMatic with RF module
	VirtualDevices
	// CUxD add on
	CUxD
	// Haus-Bus.de add on
	HausBusDe
)

Predefined CCU interface types.

func (Type) MarshalText 

func (t Type) MarshalText() ([]byte, error)

MarshalText implements TextUnmarshaler (for e.g. JSON encoding). For the method to be found by the JSON encoder, use a value receiver.

func (*Type) Set 

func (t *Type) Set(value string) error

Set implements flag.Value interface.

func (Type) String 

func (t Type) String() string

String implements the Stringer interface.

func (*Type) UnmarshalText 

func (t *Type) UnmarshalText(text []byte) error

UnmarshalText implements TextMarshaler (for e.g. JSON decoding).

type Types 

type Types []Type

Types is a list of CCU interface types.

func (*Types) Set 

func (it *Types) Set(value string) error

Set implements flag.Value interface.

func (*Types) String 

func (it *Types) String() string

Source Files

View all Source files

Directories

Path Synopsis

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL
go.dev uses cookies from Google to deliver and enhance the quality of its services and to analyze traffic. Learn more.