README
¶
Deis Control Utility
deisctl is a command-line utility used to provision and operate a Deis cluster.
Installation
Please refer to the installation docs at http://docs.deis.io/en/latest/installing_deis/install-deisctl/.
Remote Configuration
While deisctl can be used locally on a CoreOS host, it is extremely useful as a tool
for remote administration. This requires an SSH tunnel to one of your CoreOS hosts.
Test password-less SSH connectivity to a CoreOS host:
$ ssh core@172.17.8.100 hostname
deis-1
Export the DEISCTL_TUNNEL environment variable:
$ export DEISCTL_TUNNEL=172.17.8.100
Provision a Deis Platform
The deisctl install platform command will schedule all of the Deis platform
units. deisctl start platform activates these units.
$ deisctl install platform
● ▴ ■
■ ● ▴ Installing Deis...
▴ ■ ●
Logging subsystem...
deis-logger.service: loaded
Storage subsystem...
deis-store-gateway.service: loaded
Control plane...
deis-cache.service: loaded
deis-database.service: loaded
deis-registry@1.service: loaded
deis-controller.service: loaded
deis-builder.service: loaded
Data plane...
Routing mesh...
deis-router@1.service: loaded
deis-router@2.service: loaded
deis-router@3.service: loaded
Done.
Deis installed.
Please run `deisctl start platform` to boot up Deis.
$ deisctl start platform
● ▴ ■
■ ● ▴ Starting Deis...
▴ ■ ●
Logging subsystem...
deis-logger.service: running
deis-logspout.service: running
Storage subsystem...
deis-store-daemon.service: running
deis-store-monitor.service: running
deis-store-gateway.service: running
Control plane...
deis-cache.service: running
deis-database.service: running
deis-registry@1.service: running
deis-controller.service: running
deis-builder.service: running
Data plane...
deis-publisher.service: running
Routing mesh...
deis-router@1.service: running
deis-router@2.service: running
deis-router@3.service: running
Done.
Note that the default start command activates 1 of each component.
You can scale components with deisctl scale router=3, for example.
The router and the registry are the only component that currently scales beyond 1 unit.
You can also use the deisctl uninstall command to destroy platform units:
● ▴ ■
■ ● ▴ Uninstalling Deis...
▴ ■ ●
Routing mesh...
deis-router@1.service: inactive
deis-router@2.service: inactive
deis-router@3.service: inactive
Data plane...
Control plane...
deis-controller.service: inactive
deis-builder.service: inactive
deis-cache.service: inactive
deis-database.service: inactive
deis-registry@1.service: inactive
Storage subsystem...
deis-store-gateway.service: inactive
Logging subsystem...
deis-logger.service: inactive
Done.
To uninstall a specific component, use deisctl uninstall router.
Note that uninstalling platform units will not remove the data units or underlying data containers. Data must be destroyed manually.
Usage
The deisctl tool provides a number of other commands, including:
deisctl list- list Deis platform componentsdeisctl status <component>- retrieve Systemd status of a componentdeisctl journal <component>- retrieve Systemd journal outputdeisctl start <component>- start a platform componentdeisctl stop <component>- stop a platform componentdeisctl install <component>- install a single platform componentdeisctl uninstall <component>- uninstall a single platform componentdeisctl scale <component>=<num>- scale a component to the target number of unitsdeisctl refresh-units- download latest unit files
Usage Examples
$ deisctl list
UNIT MACHINE LOAD ACTIVE SUB
deis-builder.service f936b7a5.../172.17.8.100 loaded active running
deis-cache.service f936b7a5.../172.17.8.100 loaded active running
deis-controller.service f936b7a5.../172.17.8.100 loaded active running
deis-database.service f936b7a5.../172.17.8.100 loaded active running
deis-logger.service f936b7a5.../172.17.8.100 loaded active running
deis-registry@1.service f936b7a5.../172.17.8.100 loaded active running
deis-router@1.service f936b7a5.../172.17.8.100 loaded active running
$ deisctl status controller
● deis-controller.service - deis-controller
Loaded: loaded (/run/fleet/units/deis-controller.service; linked-runtime)
Active: active (running) since Mon 2014-08-25 22:56:50 UTC; 15min ago
Process: 22969 ExecStartPre=/bin/sh -c docker inspect deis-controller >/dev/null && docker rm -f deis-controller || true (code=exited, status=0/SUCCESS)
Process: 22945 ExecStartPre=/bin/sh -c IMAGE=`/run/deis/bin/get_image /deis/controller`; docker history $IMAGE >/dev/null || docker pull $IMAGE (code=exited, status=0/SUCCESS)
Main PID: 22979 (sh)
CGroup: /system.slice/system-deis\x2dcontroller.slice/deis-controller.service
├─22979 /bin/sh -c IMAGE=`/run/deis/bin/get_image /deis/controller` && docker run --name deis-controller --rm -p 8000:8000 -e PUBLISH=8000 -e HOST=$COREOS_PRIVATE_IPV4 --volumes-from=deis-logger $IMAGE
└─22999 docker run --name deis-controller --rm -p 8000:8000 -e PUBLISH=8000 -e HOST=172.17.8.100 --volumes-from=deis-logger deis/controller:latest
Aug 25 22:57:07 deis-1 sh[22979]: [2014-08-25 16:57:07,959: INFO/MainProcess] Connected to redis://172.17.8.100:6379/0
Aug 25 22:57:07 deis-1 sh[22979]: 2014-08-25 16:57:07 [121] [INFO] Booting worker with pid: 121
Aug 25 22:57:07 deis-1 sh[22979]: [2014-08-25 16:57:07,968: INFO/MainProcess] mingle: searching for neighbors
Aug 25 22:57:08 deis-1 sh[22979]: 2014-08-25 16:57:08 [122] [INFO] Booting worker with pid: 122
Aug 25 22:57:08 deis-1 sh[22979]: 2014-08-25 16:57:08 [123] [INFO] Booting worker with pid: 123
Aug 25 22:57:08 deis-1 sh[22979]: 2014-08-25 16:57:08 [124] [INFO] Booting worker with pid: 124
Aug 25 22:57:08 deis-1 sh[22979]: 2014-08-25 16:57:08 [125] [INFO] Booting worker with pid: 125
Aug 25 22:57:08 deis-1 sh[22979]: 2014-08-25 16:57:08 [126] [INFO] Booting worker with pid: 126
Aug 25 22:57:08 deis-1 sh[22979]: [2014-08-25 16:57:08,979: INFO/MainProcess] mingle: all alone
Aug 25 22:57:08 deis-1 sh[22979]: [2014-08-25 16:57:08,997: WARNING/MainProcess] celery@4378062f17a5 ready.
$ deisctl journal controller
...
Aug 25 22:57:08 deis-1 sh[22979]: 2014-08-25 16:57:08 [125] [INFO] Booting worker with pid: 125
Aug 25 22:57:08 deis-1 sh[22979]: 2014-08-25 16:57:08 [126] [INFO] Booting worker with pid: 126
Aug 25 22:57:08 deis-1 sh[22979]: [2014-08-25 16:57:08,979: INFO/MainProcess] mingle: all alone
Aug 25 22:57:08 deis-1 sh[22979]: [2014-08-25 16:57:08,997: WARNING/MainProcess] celery@4378062f17a5 ready.
$ deisctl stop controller
deis-controller.service: loaded
$ deisctl start controller
deis-controller.service: launched
$ deisctl scale router=3
deis-router@1.service: loaded
deis-router@2.service: loaded
deis-router@3.service: loaded
$ deisctl start router
deis-router@1.service: launched
deis-router@2.service: launched
deis-router@3.service: launched
Unit Search Paths
deisctl looks for unit files in these directories, in this order:
- the $DEISCTL_UNITS environment variable, if set
- $HOME/.deis/units
- /var/lib/deis/units
License
Copyright 2014, OpDemand LLC
Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. You may obtain a copy of the License at http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License.
Documentation
¶
There is no documentation for this package.
Source Files
Directories
¶
| Path | Synopsis |
|---|---|
|
Godeps
|
|
|
_workspace/src/code.google.com/p/go.crypto/ssh
Package ssh implements an SSH client and server.
|
Package ssh implements an SSH client and server. |
|
_workspace/src/code.google.com/p/go.crypto/ssh/agent
Package agent implements a client to an ssh-agent daemon.
|
Package agent implements a client to an ssh-agent daemon. |
|
_workspace/src/code.google.com/p/go.crypto/ssh/terminal
Package terminal provides support functions for dealing with terminals, as commonly found on UNIX systems.
|
Package terminal provides support functions for dealing with terminals, as commonly found on UNIX systems. |
|
_workspace/src/code.google.com/p/go.crypto/ssh/test
This package contains integration tests for the code.google.com/p/go.crypto/ssh package.
|
This package contains integration tests for the code.google.com/p/go.crypto/ssh package. |
|
_workspace/src/code.google.com/p/google-api-go-client/googleapi
Package googleapi contains the common code shared by all Google API libraries.
|
Package googleapi contains the common code shared by all Google API libraries. |
|
_workspace/src/code.google.com/p/google-api-go-client/googleapi/internal/uritemplates
Package uritemplates is a level 4 implementation of RFC 6570 (URI Template, http://tools.ietf.org/html/rfc6570).
|
Package uritemplates is a level 4 implementation of RFC 6570 (URI Template, http://tools.ietf.org/html/rfc6570). |
|
_workspace/src/code.google.com/p/google-api-go-client/googleapi/transport
Package transport contains HTTP transports used to make authenticated API requests.
|
Package transport contains HTTP transports used to make authenticated API requests. |
|
_workspace/src/github.com/coreos/fleet/schema
Package schema provides access to the fleet API.
|
Package schema provides access to the fleet API. |
|
_workspace/src/github.com/docker/libcontainer/netlink
Packet netlink provide access to low level Netlink sockets and messages.
|
Packet netlink provide access to low level Netlink sockets and messages. |
|
_workspace/src/github.com/docopt/docopt-go
Package docopt parses command-line arguments based on a help message.
|
Package docopt parses command-line arguments based on a help message. |
Click to show internal directories.
Click to hide internal directories.