types

package
v1.2.4-rc1 Latest Latest
Warning

This package is not in the latest version of its module.

 Go to latest Published: Mar 4, 2022 License: Apache-2.0 Imports: 18 Imported by: 23

Documentation

Index

Constants

View Source 
const (
	SnapPrefix = "snap"
	VolPrefix  = "vol"

	VolumeNameKey   = "volumeName"
	SnapshotNameKey = "snapshotName"
)
View Source 
const (
	LonghornManagerDaemonSetName = "longhorn-manager"

	DriverDeployerName = "longhorn-driver-deployer"
	CSIAttacherName    = "csi-attacher"
	CSIProvisionerName = "csi-provisioner"
	CSIResizerName     = "csi-resizer"
	CSISnapshotterName = "csi-snapshotter"
	CSIPluginName      = "longhorn-csi-plugin"
)
View Source 
const (
	SettingTypeString     = SettingType("string")
	SettingTypeInt        = SettingType("int")
	SettingTypeBool       = SettingType("bool")
	SettingTypeDeprecated = SettingType("deprecated")
)
View Source 
const (
	SettingNameBackupTarget                                 = SettingName("backup-target")
	SettingNameBackupTargetCredentialSecret                 = SettingName("backup-target-credential-secret")
	SettingNameAllowRecurringJobWhileVolumeDetached         = SettingName("allow-recurring-job-while-volume-detached")
	SettingNameCreateDefaultDiskLabeledNodes                = SettingName("create-default-disk-labeled-nodes")
	SettingNameDefaultDataPath                              = SettingName("default-data-path")
	SettingNameDefaultEngineImage                           = SettingName("default-engine-image")
	SettingNameDefaultInstanceManagerImage                  = SettingName("default-instance-manager-image")
	SettingNameDefaultShareManagerImage                     = SettingName("default-share-manager-image")
	SettingNameDefaultBackingImageManagerImage              = SettingName("default-backing-image-manager-image")
	SettingNameReplicaSoftAntiAffinity                      = SettingName("replica-soft-anti-affinity")
	SettingNameReplicaAutoBalance                           = SettingName("replica-auto-balance")
	SettingNameStorageOverProvisioningPercentage            = SettingName("storage-over-provisioning-percentage")
	SettingNameStorageMinimalAvailablePercentage            = SettingName("storage-minimal-available-percentage")
	SettingNameUpgradeChecker                               = SettingName("upgrade-checker")
	SettingNameCurrentLonghornVersion                       = SettingName("current-longhorn-version")
	SettingNameLatestLonghornVersion                        = SettingName("latest-longhorn-version")
	SettingNameStableLonghornVersions                       = SettingName("stable-longhorn-versions")
	SettingNameDefaultReplicaCount                          = SettingName("default-replica-count")
	SettingNameDefaultDataLocality                          = SettingName("default-data-locality")
	SettingNameGuaranteedEngineCPU                          = SettingName("guaranteed-engine-cpu")
	SettingNameDefaultLonghornStaticStorageClass            = SettingName("default-longhorn-static-storage-class")
	SettingNameBackupstorePollInterval                      = SettingName("backupstore-poll-interval")
	SettingNameTaintToleration                              = SettingName("taint-toleration")
	SettingNameSystemManagedComponentsNodeSelector          = SettingName("system-managed-components-node-selector")
	SettingNameCRDAPIVersion                                = SettingName("crd-api-version")
	SettingNameAutoSalvage                                  = SettingName("auto-salvage")
	SettingNameAutoDeletePodWhenVolumeDetachedUnexpectedly  = SettingName("auto-delete-pod-when-volume-detached-unexpectedly")
	SettingNameRegistrySecret                               = SettingName("registry-secret")
	SettingNameDisableSchedulingOnCordonedNode              = SettingName("disable-scheduling-on-cordoned-node")
	SettingNameReplicaZoneSoftAntiAffinity                  = SettingName("replica-zone-soft-anti-affinity")
	SettingNameVolumeAttachmentRecoveryPolicy               = SettingName("volume-attachment-recovery-policy")
	SettingNameNodeDownPodDeletionPolicy                    = SettingName("node-down-pod-deletion-policy")
	SettingNameAllowNodeDrainWithLastHealthyReplica         = SettingName("allow-node-drain-with-last-healthy-replica")
	SettingNameMkfsExt4Parameters                           = SettingName("mkfs-ext4-parameters")
	SettingNamePriorityClass                                = SettingName("priority-class")
	SettingNameDisableRevisionCounter                       = SettingName("disable-revision-counter")
	SettingNameDisableReplicaRebuild                        = SettingName("disable-replica-rebuild")
	SettingNameReplicaReplenishmentWaitInterval             = SettingName("replica-replenishment-wait-interval")
	SettingNameConcurrentReplicaRebuildPerNodeLimit         = SettingName("concurrent-replica-rebuild-per-node-limit")
	SettingNameSystemManagedPodsImagePullPolicy             = SettingName("system-managed-pods-image-pull-policy")
	SettingNameAllowVolumeCreationWithDegradedAvailability  = SettingName("allow-volume-creation-with-degraded-availability")
	SettingNameAutoCleanupSystemGeneratedSnapshot           = SettingName("auto-cleanup-system-generated-snapshot")
	SettingNameConcurrentAutomaticEngineUpgradePerNodeLimit = SettingName("concurrent-automatic-engine-upgrade-per-node-limit")
	SettingNameBackingImageCleanupWaitInterval              = SettingName("backing-image-cleanup-wait-interval")
	SettingNameBackingImageRecoveryWaitInterval             = SettingName("backing-image-recovery-wait-interval")
	SettingNameGuaranteedEngineManagerCPU                   = SettingName("guaranteed-engine-manager-cpu")
	SettingNameGuaranteedReplicaManagerCPU                  = SettingName("guaranteed-replica-manager-cpu")
)
View Source 
const (
	SettingCategoryGeneral    = SettingCategory("general")
	SettingCategoryBackup     = SettingCategory("backup")
	SettingCategoryScheduling = SettingCategory("scheduling")
	SettingCategoryDangerZone = SettingCategory("danger Zone")
)
View Source 
const (
	VolumeAttachmentRecoveryPolicyNever     = VolumeAttachmentRecoveryPolicy("never") // Kubernetes default behavior
	VolumeAttachmentRecoveryPolicyWait      = VolumeAttachmentRecoveryPolicy("wait")  // Longhorn default behavior
	VolumeAttachmentRecoveryPolicyImmediate = VolumeAttachmentRecoveryPolicy("immediate")
)
View Source 
const (
	NodeDownPodDeletionPolicyDoNothing                             = NodeDownPodDeletionPolicy("do-nothing") // Kubernetes default behavior
	NodeDownPodDeletionPolicyDeleteStatefulSetPod                  = NodeDownPodDeletionPolicy("delete-statefulset-pod")
	NodeDownPodDeletionPolicyDeleteDeploymentPod                   = NodeDownPodDeletionPolicy("delete-deployment-pod")
	NodeDownPodDeletionPolicyDeleteBothStatefulsetAndDeploymentPod = NodeDownPodDeletionPolicy("delete-both-statefulset-and-deployment-pod")
)
View Source 
const (
	SystemManagedPodsImagePullPolicyNever        = SystemManagedPodsImagePullPolicy("never")
	SystemManagedPodsImagePullPolicyIfNotPresent = SystemManagedPodsImagePullPolicy("if-not-present")
	SystemManagedPodsImagePullPolicyAlways       = SystemManagedPodsImagePullPolicy("always")
)
View Source 
const (
	LonghornKindNode                = "Node"
	LonghornKindVolume              = "Volume"
	LonghornKindEngineImage         = "EngineImage"
	LonghornKindInstanceManager     = "InstanceManager"
	LonghornKindShareManager        = "ShareManager"
	LonghornKindBackingImage        = "BackingImage"
	LonghornKindBackingImageManager = "BackingImageManager"
	LonghornKindRecurringJob        = "RecurringJob"

	LonghornKindBackingImageDataSource = "BackingImageDataSource"

	CRDAPIVersionV1alpha1 = "longhorn.rancher.io/v1alpha1"
	CRDAPIVersionV1beta1  = "longhorn.io/v1beta1"
	CurrentCRDAPIVersion  = CRDAPIVersionV1beta1
)
View Source 
const (
	DefaultAPIPort = 9500

	EngineBinaryDirectoryInContainer = "/engine-binaries/"
	EngineBinaryDirectoryOnHost      = "/var/lib/longhorn/engine-binaries/"
	ReplicaHostPrefix                = "/host"
	EngineBinaryName                 = "longhorn"

	BackingImageManagerDirectory = "/backing-images/"
	BackingImageFileName         = "backing"

	DefaultBackupTargetName = "default"

	LonghornNodeKey     = "longhornnode"
	LonghornDiskUUIDKey = "longhorndiskuuid"

	NodeCreateDefaultDiskLabelKey             = "node.longhorn.io/create-default-disk"
	NodeCreateDefaultDiskLabelValueTrue       = "true"
	NodeCreateDefaultDiskLabelValueConfig     = "config"
	KubeNodeDefaultDiskConfigAnnotationKey    = "node.longhorn.io/default-disks-config"
	KubeNodeDefaultNodeTagConfigAnnotationKey = "node.longhorn.io/default-node-tags"

	LastAppliedTolerationAnnotationKeySuffix = "last-applied-tolerations"

	KubernetesStatusLabel = "KubernetesStatus"
	KubernetesReplicaSet  = "ReplicaSet"
	KubernetesStatefulSet = "StatefulSet"
	RecurringJobLabel     = "RecurringJob"

	LonghornLabelKeyPrefix = "longhorn.io"

	LonghornLabelRecurringJobKeyPrefixFmt = "recurring-%s.longhorn.io"

	LonghornLabelEngineImage              = "engine-image"
	LonghornLabelInstanceManager          = "instance-manager"
	LonghornLabelNode                     = "node"
	LonghornLabelDiskUUID                 = "disk-uuid"
	LonghornLabelInstanceManagerType      = "instance-manager-type"
	LonghornLabelInstanceManagerImage     = "instance-manager-image"
	LonghornLabelVolume                   = "longhornvolume"
	LonghornLabelShareManager             = "share-manager"
	LonghornLabelShareManagerImage        = "share-manager-image"
	LonghornLabelBackingImage             = "backing-image"
	LonghornLabelBackingImageManager      = "backing-image-manager"
	LonghornLabelManagedBy                = "managed-by"
	LonghornLabelSnapshotForCloningVolume = "for-cloning-volume"
	LonghornLabelBackingImageDataSource   = "backing-image-data-source"
	LonghornLabelBackupVolume             = "backup-volume"
	LonghornLabelRecurringJob             = "job"
	LonghornLabelRecurringJobGroup        = "job-group"

	LonghornLabelValueEnabled = "enabled"

	LonghornLabelExportFromVolume                 = "export-from-volume"
	LonghornLabelSnapshotForExportingBackingImage = "for-exporting-backing-image"

	KubernetesFailureDomainRegionLabelKey = "failure-domain.beta.kubernetes.io/region"
	KubernetesFailureDomainZoneLabelKey   = "failure-domain.beta.kubernetes.io/zone"
	KubernetesTopologyRegionLabelKey      = "topology.kubernetes.io/region"
	KubernetesTopologyZoneLabelKey        = "topology.kubernetes.io/zone"

	LonghornDriverName = "driver.longhorn.io"

	DefaultDiskPrefix = "default-disk-"

	DeprecatedProvisionerName        = "rancher.io/longhorn"
	DepracatedDriverName             = "io.rancher.longhorn"
	DefaultStorageClassConfigMapName = "longhorn-storageclass"
	DefaultStorageClassName          = "longhorn"
	ControlPlaneName                 = "longhorn-manager"

	DefaultRecurringJobConcurrency = 10
)
View Source 
const (
	EnvNodeName       = "NODE_NAME"
	EnvPodNamespace   = "POD_NAMESPACE"
	EnvPodIP          = "POD_IP"
	EnvServiceAccount = "SERVICE_ACCOUNT"

	BackupStoreTypeS3 = "s3"

	AWSIAMRoleAnnotation = "iam.amazonaws.com/role"
	AWSIAMRoleArn        = "AWS_IAM_ROLE_ARN"
	AWSAccessKey         = "AWS_ACCESS_KEY_ID"
	AWSSecretKey         = "AWS_SECRET_ACCESS_KEY"
	AWSEndPoint          = "AWS_ENDPOINTS"
	AWSCert              = "AWS_CERT"

	HTTPSProxy = "HTTPS_PROXY"
	HTTPProxy  = "HTTP_PROXY"
	NOProxy    = "NO_PROXY"

	VirtualHostedStyle = "VIRTUAL_HOSTED_STYLE"

	OptionFromBackup          = "fromBackup"
	OptionNumberOfReplicas    = "numberOfReplicas"
	OptionStaleReplicaTimeout = "staleReplicaTimeout"
	OptionBaseImage           = "baseImage"
	OptionFrontend            = "frontend"
	OptionDiskSelector        = "diskSelector"
	OptionNodeSelector        = "nodeSelector"

	// DefaultStaleReplicaTimeout in minutes. 48h by default
	DefaultStaleReplicaTimeout = "2880"

	ImageChecksumNameLength = 8
)
View Source 
const (
	BackingImageDataSourcePodNamePrefix = "backing-image-ds-"
)
View Source 
const (
	EnvDefaultSettingPath = "DEFAULT_SETTING_PATH"
)
View Source 
const (
	KubernetesMinVersion = "v1.18.0"
)

Variables

View Source 
var (
	SettingDefinitions = map[SettingName]SettingDefinition{
		SettingNameBackupTarget:                                 SettingDefinitionBackupTarget,
		SettingNameBackupTargetCredentialSecret:                 SettingDefinitionBackupTargetCredentialSecret,
		SettingNameAllowRecurringJobWhileVolumeDetached:         SettingDefinitionAllowRecurringJobWhileVolumeDetached,
		SettingNameCreateDefaultDiskLabeledNodes:                SettingDefinitionCreateDefaultDiskLabeledNodes,
		SettingNameDefaultDataPath:                              SettingDefinitionDefaultDataPath,
		SettingNameDefaultEngineImage:                           SettingDefinitionDefaultEngineImage,
		SettingNameDefaultInstanceManagerImage:                  SettingDefinitionDefaultInstanceManagerImage,
		SettingNameDefaultShareManagerImage:                     SettingDefinitionDefaultShareManagerImage,
		SettingNameDefaultBackingImageManagerImage:              SettingDefinitionDefaultBackingImageManagerImage,
		SettingNameReplicaSoftAntiAffinity:                      SettingDefinitionReplicaSoftAntiAffinity,
		SettingNameReplicaAutoBalance:                           SettingDefinitionReplicaAutoBalance,
		SettingNameStorageOverProvisioningPercentage:            SettingDefinitionStorageOverProvisioningPercentage,
		SettingNameStorageMinimalAvailablePercentage:            SettingDefinitionStorageMinimalAvailablePercentage,
		SettingNameUpgradeChecker:                               SettingDefinitionUpgradeChecker,
		SettingNameCurrentLonghornVersion:                       SettingDefinitionCurrentLonghornVersion,
		SettingNameLatestLonghornVersion:                        SettingDefinitionLatestLonghornVersion,
		SettingNameStableLonghornVersions:                       SettingDefinitionStableLonghornVersions,
		SettingNameDefaultReplicaCount:                          SettingDefinitionDefaultReplicaCount,
		SettingNameDefaultDataLocality:                          SettingDefinitionDefaultDataLocality,
		SettingNameGuaranteedEngineCPU:                          SettingDefinitionGuaranteedEngineCPU,
		SettingNameDefaultLonghornStaticStorageClass:            SettingDefinitionDefaultLonghornStaticStorageClass,
		SettingNameBackupstorePollInterval:                      SettingDefinitionBackupstorePollInterval,
		SettingNameTaintToleration:                              SettingDefinitionTaintToleration,
		SettingNameSystemManagedComponentsNodeSelector:          SettingDefinitionSystemManagedComponentsNodeSelector,
		SettingNameCRDAPIVersion:                                SettingDefinitionCRDAPIVersion,
		SettingNameAutoSalvage:                                  SettingDefinitionAutoSalvage,
		SettingNameAutoDeletePodWhenVolumeDetachedUnexpectedly:  SettingDefinitionAutoDeletePodWhenVolumeDetachedUnexpectedly,
		SettingNameRegistrySecret:                               SettingDefinitionRegistrySecret,
		SettingNameDisableSchedulingOnCordonedNode:              SettingDefinitionDisableSchedulingOnCordonedNode,
		SettingNameReplicaZoneSoftAntiAffinity:                  SettingDefinitionReplicaZoneSoftAntiAffinity,
		SettingNameVolumeAttachmentRecoveryPolicy:               SettingDefinitionVolumeAttachmentRecoveryPolicy,
		SettingNameNodeDownPodDeletionPolicy:                    SettingDefinitionNodeDownPodDeletionPolicy,
		SettingNameAllowNodeDrainWithLastHealthyReplica:         SettingDefinitionAllowNodeDrainWithLastHealthyReplica,
		SettingNameMkfsExt4Parameters:                           SettingDefinitionMkfsExt4Parameters,
		SettingNamePriorityClass:                                SettingDefinitionPriorityClass,
		SettingNameDisableRevisionCounter:                       SettingDefinitionDisableRevisionCounter,
		SettingNameDisableReplicaRebuild:                        SettingDefinitionDisableReplicaRebuild,
		SettingNameReplicaReplenishmentWaitInterval:             SettingDefinitionReplicaReplenishmentWaitInterval,
		SettingNameConcurrentReplicaRebuildPerNodeLimit:         SettingDefinitionConcurrentReplicaRebuildPerNodeLimit,
		SettingNameSystemManagedPodsImagePullPolicy:             SettingDefinitionSystemManagedPodsImagePullPolicy,
		SettingNameAllowVolumeCreationWithDegradedAvailability:  SettingDefinitionAllowVolumeCreationWithDegradedAvailability,
		SettingNameAutoCleanupSystemGeneratedSnapshot:           SettingDefinitionAutoCleanupSystemGeneratedSnapshot,
		SettingNameConcurrentAutomaticEngineUpgradePerNodeLimit: SettingDefinitionConcurrentAutomaticEngineUpgradePerNodeLimit,
		SettingNameBackingImageCleanupWaitInterval:              SettingDefinitionBackingImageCleanupWaitInterval,
		SettingNameBackingImageRecoveryWaitInterval:             SettingDefinitionBackingImageRecoveryWaitInterval,
		SettingNameGuaranteedEngineManagerCPU:                   SettingDefinitionGuaranteedEngineManagerCPU,
		SettingNameGuaranteedReplicaManagerCPU:                  SettingDefinitionGuaranteedReplicaManagerCPU,
	}

	SettingDefinitionBackupTarget = SettingDefinition{
		DisplayName: "Backup Target",
		Description: "The endpoint used to access the backupstore. NFS and S3 are supported.",
		Category:    SettingCategoryBackup,
		Type:        SettingTypeString,
		Required:    false,
		ReadOnly:    false,
	}

	SettingDefinitionBackupTargetCredentialSecret = SettingDefinition{
		DisplayName: "Backup Target Credential Secret",
		Description: "The name of the Kubernetes secret associated with the backup target.",
		Category:    SettingCategoryBackup,
		Type:        SettingTypeString,
		Required:    false,
		ReadOnly:    false,
	}

	SettingDefinitionAllowRecurringJobWhileVolumeDetached = SettingDefinition{
		DisplayName: "Allow Recurring Job While Volume Is Detached",
		Description: "If this setting is enabled, Longhorn will automatically attaches the volume and takes snapshot/backup when it is the time to do recurring snapshot/backup. \n\n" +
			"Note that the volume is not ready for workload during the period when the volume was automatically attached. " +
			"Workload will have to wait until the recurring job finishes.",
		Category: SettingCategoryBackup,
		Type:     SettingTypeBool,
		Required: true,
		ReadOnly: false,
		Default:  "false",
	}

	SettingDefinitionBackupstorePollInterval = SettingDefinition{
		DisplayName: "Backupstore Poll Interval",
		Description: "In seconds. The backupstore poll interval determines how often Longhorn checks the backupstore for new backups. Set to 0 to disable the polling.",
		Category:    SettingCategoryBackup,
		Type:        SettingTypeInt,
		Required:    true,
		ReadOnly:    false,
		Default:     "300",
	}

	SettingDefinitionCreateDefaultDiskLabeledNodes = SettingDefinition{
		DisplayName: "Create Default Disk on Labeled Nodes",
		Description: "Create default Disk automatically only on Nodes with the label " +
			"\"node.longhorn.io/create-default-disk=true\" if no other disks exist. If disabled, the default disk will " +
			"be created on all new nodes when each node is first added.",
		Category: SettingCategoryGeneral,
		Type:     SettingTypeBool,
		Required: true,
		ReadOnly: false,
		Default:  "false",
	}

	SettingDefinitionDefaultDataPath = SettingDefinition{
		DisplayName: "Default Data Path",
		Description: "Default path to use for storing data on a host",
		Category:    SettingCategoryGeneral,
		Type:        SettingTypeString,
		Required:    true,
		ReadOnly:    false,
		Default:     "/var/lib/longhorn/",
	}

	SettingDefinitionDefaultEngineImage = SettingDefinition{
		DisplayName: "Default Engine Image",
		Description: "The default engine image used by the manager. Can be changed on the manager starting command line only",
		Category:    SettingCategoryGeneral,
		Type:        SettingTypeString,
		Required:    true,
		ReadOnly:    true,
	}

	SettingDefinitionDefaultInstanceManagerImage = SettingDefinition{
		DisplayName: "Default Instance Manager Image",
		Description: "The default instance manager image used by the manager. Can be changed on the manager starting command line only",
		Category:    SettingCategoryGeneral,
		Type:        SettingTypeString,
		Required:    true,
		ReadOnly:    true,
	}

	SettingDefinitionDefaultShareManagerImage = SettingDefinition{
		DisplayName: "Default Share Manager Image",
		Description: "The default share manager image used by the manager. Can be changed on the manager starting command line only",
		Category:    SettingCategoryGeneral,
		Type:        SettingTypeString,
		Required:    true,
		ReadOnly:    true,
	}

	SettingDefinitionDefaultBackingImageManagerImage = SettingDefinition{
		DisplayName: "Default Backing Image Manager Image",
		Description: "The default backing image manager image used by the manager. Can be changed on the manager starting command line only",
		Category:    SettingCategoryGeneral,
		Type:        SettingTypeString,
		Required:    true,
		ReadOnly:    true,
	}

	SettingDefinitionReplicaSoftAntiAffinity = SettingDefinition{
		DisplayName: "Replica Node Level Soft Anti-Affinity",
		Description: "Allow scheduling on nodes with existing healthy replicas of the same volume",
		Category:    SettingCategoryScheduling,
		Type:        SettingTypeBool,
		Required:    true,
		ReadOnly:    false,
		Default:     "false",
	}

	SettingDefinitionReplicaAutoBalance = SettingDefinition{
		DisplayName: "Replica Auto Balance",
		Description: "Enable this setting automatically rebalances replicas when discovered an available node.\n\n" +
			"The available global options are: \n\n" +
			"- **disabled**. This is the default option. No replica auto-balance will be done.\n" +
			"- **least-effort**. This option instructs Longhorn to balance replicas for minimal redundancy.\n" +
			"- **best-effort**. This option instructs Longhorn to balance replicas for even redundancy.\n\n" +
			"Longhorn also support individual volume setting. The setting can be specified on Volume page, this overrules the global setting.\n\n" +
			"The available volume setting options are: \n\n" +
			"- **ignored**. This is the default option that instructs Longhorn to inherit from the global setting.\n" +
			"- **disabled**. This option instructs Longhorn no replica auto-balance should be done.\n" +
			"- **least-effort**. This option instructs Longhorn to balance replicas for minimal redundancy.\n" +
			"- **best-effort**. This option instructs Longhorn to balance replicas for even redundancy.\n",
		Category: SettingCategoryScheduling,
		Type:     SettingTypeString,
		Required: true,
		ReadOnly: false,
		Default:  string(longhorn.ReplicaAutoBalanceDisabled),
		Choices: []string{
			string(longhorn.ReplicaAutoBalanceDisabled),
			string(longhorn.ReplicaAutoBalanceLeastEffort),
			string(longhorn.ReplicaAutoBalanceBestEffort),
		},
	}

	SettingDefinitionStorageOverProvisioningPercentage = SettingDefinition{
		DisplayName: "Storage Over Provisioning Percentage",
		Description: "The over-provisioning percentage defines how much storage can be allocated relative to the hard drive's capacity",
		Category:    SettingCategoryScheduling,
		Type:        SettingTypeInt,
		Required:    true,
		ReadOnly:    false,
		Default:     "200",
	}

	SettingDefinitionStorageMinimalAvailablePercentage = SettingDefinition{
		DisplayName: "Storage Minimal Available Percentage",
		Description: "If the minimum available disk capacity exceeds the actual percentage of available disk capacity, the disk becomes unschedulable until more space is freed up.",
		Category:    SettingCategoryScheduling,
		Type:        SettingTypeInt,
		Required:    true,
		ReadOnly:    false,
		Default:     "25",
	}

	SettingDefinitionUpgradeChecker = SettingDefinition{
		DisplayName: "Enable Upgrade Checker",
		Description: "Upgrade Checker will check for new Longhorn version periodically. When there is a new version available, a notification will appear in the UI",
		Category:    SettingCategoryGeneral,
		Type:        SettingTypeBool,
		Required:    true,
		ReadOnly:    false,
		Default:     "true",
	}

	SettingDefinitionCurrentLonghornVersion = SettingDefinition{
		DisplayName: "Current Longhorn Version",
		Description: "The current Longhorn version.",
		Category:    SettingCategoryGeneral,
		Type:        SettingTypeString,
		Required:    false,
		ReadOnly:    true,
		Default:     meta.Version,
	}

	SettingDefinitionLatestLonghornVersion = SettingDefinition{
		DisplayName: "Latest Longhorn Version",
		Description: "The latest version of Longhorn available. Updated by Upgrade Checker automatically",
		Category:    SettingCategoryGeneral,
		Type:        SettingTypeString,
		Required:    false,
		ReadOnly:    true,
	}

	SettingDefinitionStableLonghornVersions = SettingDefinition{
		DisplayName: "Stable Longhorn Versions",
		Description: "The latest stable version of every minor release line. Updated by Upgrade Checker automatically",
		Category:    SettingCategoryGeneral,
		Type:        SettingTypeString,
		Required:    false,
		ReadOnly:    true,
	}

	SettingDefinitionDefaultReplicaCount = SettingDefinition{
		DisplayName: "Default Replica Count",
		Description: "The default number of replicas when a volume is created from the Longhorn UI. For Kubernetes configuration, update the `numberOfReplicas` in the StorageClass",
		Category:    SettingCategoryGeneral,
		Type:        SettingTypeInt,
		Required:    true,
		ReadOnly:    false,
		Default:     "3",
	}

	SettingDefinitionDefaultDataLocality = SettingDefinition{
		DisplayName: "Default Data Locality",
		Description: "We say a Longhorn volume has data locality if there is a local replica of the volume on the same node as the pod which is using the volume.\n\n" +
			"This setting specifies the default data locality when a volume is created from the Longhorn UI. For Kubernetes configuration, update the `dataLocality` in the StorageClass\n\n" +
			"The available modes are: \n\n" +
			"- **disabled**. This is the default option. There may or may not be a replica on the same node as the attached volume (workload)\n" +
			"- **best-effort**. This option instructs Longhorn to try to keep a replica on the same node as the attached volume (workload). Longhorn will not stop the volume, even if it cannot keep a replica local to the attached volume (workload) due to environment limitation, e.g. not enough disk space, incompatible disk tags, etc.\n",
		Category: SettingCategoryGeneral,
		Type:     SettingTypeString,
		Required: true,
		ReadOnly: false,
		Default:  string(longhorn.DataLocalityDisabled),
		Choices: []string{
			string(longhorn.DataLocalityDisabled),
			string(longhorn.DataLocalityBestEffort),
		},
	}

	SettingDefinitionGuaranteedEngineCPU = SettingDefinition{
		DisplayName: "Guaranteed Engine CPU (Deprecated)",
		Description: "This setting is replaced by 2 new settings \"Guaranteed Engine Manager CPU\" and \"Guaranteed Replica Manager CPU\" since Longhorn version v1.1.1. \n" +
			"This setting was used to control the CPU requests of all Longhorn Instance Manager pods. \n",
		Category: SettingCategoryDangerZone,
		Type:     SettingTypeDeprecated,
		Required: false,
		ReadOnly: true,
		Default:  "",
	}

	SettingDefinitionDefaultLonghornStaticStorageClass = SettingDefinition{
		DisplayName: "Default Longhorn Static StorageClass Name",
		Description: "The 'storageClassName' is given to PVs and PVCs that are created for an existing Longhorn volume. The StorageClass name can also be used as a label, so it is possible to use a Longhorn StorageClass to bind a workload to an existing PV without creating a Kubernetes StorageClass object.",
		Category:    SettingCategoryGeneral,
		Type:        SettingTypeString,
		Required:    true,
		ReadOnly:    false,
		Default:     "longhorn-static",
	}

	SettingDefinitionTaintToleration = SettingDefinition{
		DisplayName: "Kubernetes Taint Toleration",
		Description: "If you want to dedicate nodes to just store Longhorn replicas and reject other general workloads, you can set tolerations for **all** Longhorn components and add taints to the nodes dedicated for storage. " +
			"Longhorn system contains user deployed components (e.g, Longhorn manager, Longhorn driver, Longhorn UI) and system managed components (e.g, instance manager, engine image, CSI driver, etc.) " +
			"This setting only sets taint tolerations for system managed components. " +
			"Depending on how you deployed Longhorn, you need to set taint tolerations for user deployed components in Helm chart or deployment YAML file. " +
			"All Longhorn volumes should be detached before modifying toleration settings. " +
			"We recommend setting tolerations during Longhorn deployment because the Longhorn system cannot be operated during the update. " +
			"Multiple tolerations can be set here, and these tolerations are separated by semicolon. For example: \n\n" +
			"* `key1=value1:NoSchedule; key2:NoExecute` \n\n" +
			"* `:` this toleration tolerates everything because an empty key with operator `Exists` matches all keys, values and effects \n\n" +
			"* `key1=value1:`  this toleration has empty effect. It matches all effects with key `key1` \n\n" +
			"Because `kubernetes.io` is used as the key of all Kubernetes default tolerations, it should not be used in the toleration settings.\n\n " +
			"WARNING: DO NOT CHANGE THIS SETTING WITH ATTACHED VOLUMES! ",
		Category: SettingCategoryDangerZone,
		Type:     SettingTypeString,
		Required: false,
		ReadOnly: false,
	}

	SettingDefinitionSystemManagedComponentsNodeSelector = SettingDefinition{
		DisplayName: "System Managed Components Node Selector",
		Description: "If you want to restrict Longhorn components to only run on particular set of nodes, you can set node selector for **all** Longhorn components. " +
			"Longhorn system contains user deployed components (e.g, Longhorn manager, Longhorn driver, Longhorn UI) and system managed components (e.g, instance manager, engine image, CSI driver, etc.) " +
			"You must follow the below order when set the node selector:\n\n" +
			"1. Set node selector for user deployed components in Helm chart or deployment YAML file depending on how you deployed Longhorn.\n\n" +
			"2. Set node selector for system managed components in here.\n\n" +
			"All Longhorn volumes should be detached before modifying node selector settings. " +
			"We recommend setting node selector during Longhorn deployment because the Longhorn system cannot be operated during the update. " +
			"Multiple label key-value pairs are separated by semicolon. For example: \n\n" +
			"* `label-key1=label-value1; label-key2=label-value2` \n\n" +
			"WARNING: DO NOT CHANGE THIS SETTING WITH ATTACHED VOLUMES! \n\n" +
			"Please see the documentation at https://longhorn.io for more detailed instructions about changing node selector",
		Category: SettingCategoryDangerZone,
		Type:     SettingTypeString,
		Required: false,
		ReadOnly: false,
	}

	SettingDefinitionCRDAPIVersion = SettingDefinition{
		DisplayName: "Custom Resource API Version",
		Description: "The current customer resource's API version, e.g. longhorn.io/v1beta1. Set by manager automatically",
		Category:    SettingCategoryGeneral,
		Type:        SettingTypeString,
		Required:    true,
		ReadOnly:    true,
	}

	SettingDefinitionAutoSalvage = SettingDefinition{
		DisplayName: "Automatic salvage",
		Description: "If enabled, volumes will be automatically salvaged when all the replicas become faulty e.g. due to network disconnection. Longhorn will try to figure out which replica(s) are usable, then use them for the volume.",
		Category:    SettingCategoryGeneral,
		Type:        SettingTypeBool,
		Required:    true,
		ReadOnly:    false,
		Default:     "true",
	}

	SettingDefinitionAutoDeletePodWhenVolumeDetachedUnexpectedly = SettingDefinition{
		DisplayName: "Automatically Delete Workload Pod when The Volume Is Detached Unexpectedly",
		Description: "If enabled, Longhorn will automatically delete the workload pod that is managed by a controller (e.g. deployment, statefulset, daemonset, etc...) when Longhorn volume is detached unexpectedly (e.g. during Kubernetes upgrade, Docker reboot, or network disconnect). " +
			"By deleting the pod, its controller restarts the pod and Kubernetes handles volume reattachment and remount. \n\n" +
			"If disabled, Longhorn will not delete the workload pod that is managed by a controller. You will have to manually restart the pod to reattach and remount the volume. \n\n" +
			"**Note:** This setting doesn't apply to the workload pods that don't have a controller. Longhorn never deletes them.",
		Category: SettingCategoryGeneral,
		Type:     SettingTypeBool,
		Required: true,
		ReadOnly: false,
		Default:  "true",
	}

	SettingDefinitionRegistrySecret = SettingDefinition{
		DisplayName: "Registry secret",
		Description: "The Kubernetes Secret name",
		Category:    SettingCategoryGeneral,
		Type:        SettingTypeString,
		Required:    false,
		ReadOnly:    false,
		Default:     "",
	}
	SettingDefinitionDisableSchedulingOnCordonedNode = SettingDefinition{
		DisplayName: "Disable Scheduling On Cordoned Node",
		Description: `Disable Longhorn manager to schedule replica on Kubernetes cordoned node`,
		Category:    SettingCategoryScheduling,
		Type:        SettingTypeBool,
		Required:    true,
		ReadOnly:    false,
		Default:     "true",
	}
	SettingDefinitionReplicaZoneSoftAntiAffinity = SettingDefinition{
		DisplayName: "Replica Zone Level Soft Anti-Affinity",
		Description: "Allow scheduling new Replicas of Volume to the Nodes in the same Zone as existing healthy Replicas. Nodes don't belong to any Zone will be treated as in the same Zone. Notice that Longhorn relies on label `topology.kubernetes.io/zone=<Zone name of the node>` in the Kubernetes node object to identify the zone.",
		Category:    SettingCategoryScheduling,
		Type:        SettingTypeBool,
		Required:    true,
		ReadOnly:    false,
		Default:     "true",
	}
	SettingDefinitionVolumeAttachmentRecoveryPolicy = SettingDefinition{
		DisplayName: "Volume Attachment Recovery Policy",
		Description: "Defines the Longhorn action when a Volume is stuck with a Deployment Pod on a failed node.\n" +
			"- **wait** leads to the deletion of the volume attachment as soon as the pods deletion time has passed.\n" +
			"- **never** is the default Kubernetes behavior of never deleting volume attachments on terminating pods.\n" +
			"- **immediate** leads to the deletion of the volume attachment as soon as all workload pods are pending.\n",
		Category: SettingCategoryGeneral,
		Type:     SettingTypeDeprecated,
		Required: true,
		ReadOnly: false,
		Default:  string(VolumeAttachmentRecoveryPolicyWait),
		Choices: []string{
			string(VolumeAttachmentRecoveryPolicyNever),
			string(VolumeAttachmentRecoveryPolicyWait),
			string(VolumeAttachmentRecoveryPolicyImmediate),
		},
	}
	SettingDefinitionNodeDownPodDeletionPolicy = SettingDefinition{
		DisplayName: "Pod Deletion Policy When Node is Down",
		Description: "Defines the Longhorn action when a Volume is stuck with a StatefulSet/Deployment Pod on a node that is down.\n" +
			"- **do-nothing** is the default Kubernetes behavior of never force deleting StatefulSet/Deployment terminating pods. Since the pod on the node that is down isn't removed, Longhorn volumes are stuck on nodes that are down.\n" +
			"- **delete-statefulset-pod** Longhorn will force delete StatefulSet terminating pods on nodes that are down to release Longhorn volumes so that Kubernetes can spin up replacement pods.\n" +
			"- **delete-deployment-pod** Longhorn will force delete Deployment terminating pods on nodes that are down to release Longhorn volumes so that Kubernetes can spin up replacement pods.\n" +
			"- **delete-both-statefulset-and-deployment-pod** Longhorn will force delete StatefulSet/Deployment terminating pods on nodes that are down to release Longhorn volumes so that Kubernetes can spin up replacement pods.\n",
		Category: SettingCategoryGeneral,
		Type:     SettingTypeString,
		Required: true,
		ReadOnly: false,
		Default:  string(NodeDownPodDeletionPolicyDoNothing),
		Choices: []string{
			string(NodeDownPodDeletionPolicyDoNothing),
			string(NodeDownPodDeletionPolicyDeleteStatefulSetPod),
			string(NodeDownPodDeletionPolicyDeleteDeploymentPod),
			string(NodeDownPodDeletionPolicyDeleteBothStatefulsetAndDeploymentPod),
		},
	}

	SettingDefinitionAllowNodeDrainWithLastHealthyReplica = SettingDefinition{
		DisplayName: "Allow Node Drain with the Last Healthy Replica",
		Description: "By default, Longhorn will block `kubectl drain` action on a node if the node contains the last healthy replica of a volume.\n\n" +
			"If this setting is enabled, Longhorn will **not** block `kubectl drain` action on a node even if the node contains the last healthy replica of a volume.",
		Category: SettingCategoryGeneral,
		Type:     SettingTypeBool,
		Required: true,
		ReadOnly: false,
		Default:  "false",
	}

	SettingDefinitionMkfsExt4Parameters = SettingDefinition{
		DisplayName: "Custom mkfs.ext4 parameters",
		Description: "Allows setting additional filesystem creation parameters for ext4. For older host kernels it might be necessary to disable the optional ext4 metadata_csum feature by specifying `-O ^64bit,^metadata_csum`",
		Category:    SettingCategoryGeneral,
		Type:        SettingTypeString,
		Required:    false,
		ReadOnly:    false,
	}
	SettingDefinitionPriorityClass = SettingDefinition{
		DisplayName: "Priority Class",
		Description: "The name of the Priority Class to set on the Longhorn components. This can help prevent Longhorn components from being evicted under Node Pressure. \n" +
			"Longhorn system contains user deployed components (e.g, Longhorn manager, Longhorn driver, Longhorn UI) and system managed components (e.g, instance manager, engine image, CSI driver, etc.) " +
			"Note that this setting only sets Priority Class for system managed components. " +
			"Depending on how you deployed Longhorn, you need to set Priority Class for user deployed components in Helm chart or deployment YAML file. \n" +
			"WARNING: DO NOT CHANGE THIS SETTING WITH ATTACHED VOLUMES.",
		Category: SettingCategoryDangerZone,
		Required: false,
		ReadOnly: false,
	}
	SettingDefinitionDisableRevisionCounter = SettingDefinition{
		DisplayName: "Disable Revision Counter",
		Description: "This setting is only for volumes created by UI. By default, this is false meaning there will be a revision counter file to track every write to the volume. During salvage recovering Longhorn will pick the repica with largest revision counter as candidate to recover the whole volume. If revision counter is disabled, Longhorn will not track every write to the volume. During the salvage recovering, Longhorn will use the 'volume-head-xxx.img' file last modification time and file size to pick the replica candidate to recover the whole volume.",
		Category:    SettingCategoryGeneral,
		Type:        SettingTypeBool,
		Required:    true,
		ReadOnly:    false,
		Default:     "false",
	}
	SettingDefinitionDisableReplicaRebuild = SettingDefinition{
		DisplayName: "Disable Replica Rebuild",
		Description: "This setting disable replica rebuild cross the whole cluster, eviction and data locality feature won't work if this setting is true. But doesn't have any impact to any current replica rebuild and restore disaster recovery volume.",
		Category:    SettingCategoryDangerZone,
		Type:        SettingTypeDeprecated,
		Required:    true,
		ReadOnly:    false,
		Default:     "false",
	}

	SettingDefinitionReplicaReplenishmentWaitInterval = SettingDefinition{
		DisplayName: "Replica Replenishment Wait Interval",
		Description: "In seconds. The interval determines how long Longhorn will wait at least in order to reuse the existing data on a failed replica rather than directly creating a new replica for a degraded volume.\n" +
			"Warning: This option works only when there is a failed replica in the volume. And this option may block the rebuilding for a while in the case.",
		Category: SettingCategoryGeneral,
		Type:     SettingTypeInt,
		Required: true,
		ReadOnly: false,
		Default:  "600",
	}

	SettingDefinitionConcurrentReplicaRebuildPerNodeLimit = SettingDefinition{
		DisplayName: "Concurrent Replica Rebuild Per Node Limit",
		Description: "This setting controls how many replicas on a node can be rebuilt simultaneously. \n\n" +
			"Typically, Longhorn can block the replica starting once the current rebuilding count on a node exceeds the limit. But when the value is 0, it means disabling the replica rebuilding. \n\n" +
			"WARNING: \n\n" +
			"  - The old setting \"Disable Replica Rebuild\" is replaced by this setting. \n\n" +
			"  - Different from relying on replica starting delay to limit the concurrent rebuilding, if the rebuilding is disabled, replica object replenishment will be directly skipped. \n\n" +
			"  - When the value is 0, the eviction and data locality feature won't work. But this shouldn't have any impact to any current replica rebuild and backup restore.",
		Category: SettingCategoryDangerZone,
		Type:     SettingTypeInt,
		Required: true,
		ReadOnly: false,
		Default:  "5",
	}

	SettingDefinitionSystemManagedPodsImagePullPolicy = SettingDefinition{
		DisplayName: "System Managed Pod Image Pull Policy",
		Description: "This setting defines the Image Pull Policy of Longhorn system managed pods, e.g. instance manager, engine image, CSI driver, etc. " +
			"The new Image Pull Policy will only apply after the system managed pods restart.",
		Category: SettingCategoryGeneral,
		Type:     SettingTypeString,
		Required: true,
		ReadOnly: false,
		Default:  string(SystemManagedPodsImagePullPolicyIfNotPresent),
		Choices: []string{
			string(SystemManagedPodsImagePullPolicyIfNotPresent),
			string(SystemManagedPodsImagePullPolicyNever),
			string(SystemManagedPodsImagePullPolicyAlways),
		},
	}

	SettingDefinitionAllowVolumeCreationWithDegradedAvailability = SettingDefinition{
		DisplayName: "Allow Volume Creation with Degraded Availability",
		Description: "This setting allows user to create and attach a volume that doesn't have all the replicas scheduled at the time of creation.",
		Category:    SettingCategoryScheduling,
		Type:        SettingTypeBool,
		Required:    true,
		ReadOnly:    false,
		Default:     "true",
	}

	SettingDefinitionAutoCleanupSystemGeneratedSnapshot = SettingDefinition{
		DisplayName: "Automatically Cleanup System Generated Snapshot",
		Description: "This setting enables Longhorn to automatically cleanup the system generated snapshot after replica rebuild is done.",
		Category:    SettingCategoryGeneral,
		Type:        SettingTypeBool,
		Required:    true,
		ReadOnly:    false,
		Default:     "true",
	}

	SettingDefinitionConcurrentAutomaticEngineUpgradePerNodeLimit = SettingDefinition{
		DisplayName: "Concurrent Automatic Engine Upgrade Per Node Limit",
		Description: "This setting controls how Longhorn automatically upgrades volumes' engines after upgrading Longhorn manager. " +
			"The value of this setting specifies the maximum number of engines per node that are allowed to upgrade to the default engine image at the same time. " +
			"If the value is 0, Longhorn will not automatically upgrade volumes' engines to default version.",
		Category: SettingCategoryGeneral,
		Type:     SettingTypeInt,
		Required: true,
		ReadOnly: false,
		Default:  "0",
	}

	SettingDefinitionBackingImageCleanupWaitInterval = SettingDefinition{
		DisplayName: "Backing Image Cleanup Wait Interval",
		Description: "In minutes. The interval determines how long Longhorn will wait before cleaning up the backing image file when there is no replica in the disk using it.",
		Category:    SettingCategoryGeneral,
		Type:        SettingTypeInt,
		Required:    true,
		ReadOnly:    false,
		Default:     "60",
	}

	SettingDefinitionBackingImageRecoveryWaitInterval = SettingDefinition{
		DisplayName: "Backing Image Recovery Wait Interval",
		Description: "In seconds. The interval determines how long Longhorn will wait before re-downloading the backing image file when all disk files of this backing image become failed or unknown. \n\n" +
			"WARNING: \n\n" +
			"  - This recovery only works for the backing image of which the creation type is \"download\". \n\n" +
			"  - File state \"unknown\" means the related manager pods on the pod is not running or the node itself is down/disconnected.",
		Category: SettingCategoryGeneral,
		Type:     SettingTypeInt,
		Required: true,
		ReadOnly: false,
		Default:  "300",
	}

	SettingDefinitionGuaranteedEngineManagerCPU = SettingDefinition{
		DisplayName: "Guaranteed Engine Manager CPU",
		Description: "This integer value indicates how many percentage of the total allocatable CPU on each node will be reserved for each engine manager Pod. For example, 10 means 10% of the total CPU on a node will be allocated to each engine manager pod on this node. This will help maintain engine stability during high node workload. \n\n" +
			"In order to prevent unexpected volume engine crash as well as guarantee a relative acceptable IO performance, you can use the following formula to calculate a value for this setting: \n\n" +
			"Guaranteed Engine Manager CPU = The estimated max Longhorn volume engine count on a node * 0.1 / The total allocatable CPUs on the node * 100. \n\n" +
			"The result of above calculation doesn't mean that's the maximum CPU resources the Longhorn workloads require. To fully exploit the Longhorn volume I/O performance, you can allocate/guarantee more CPU resources via this setting. \n\n" +
			"If it's hard to estimate the usage now, you can leave it with the default value, which is 12%. Then you can tune it when there is no running workload using Longhorn volumes. \n\n" +
			"WARNING: \n\n" +
			"  - Value 0 means unsetting CPU requests for engine manager pods. \n\n" +
			"  - Considering the possible new instance manager pods in the further system upgrade, this integer value is range from 0 to 40. And the sum with setting 'Guaranteed Engine Manager CPU' should not be greater than 40. \n\n" +
			"  - One more set of instance manager pods may need to be deployed when the Longhorn system is upgraded. If current available CPUs of the nodes are not enough for the new instance manager pods, you need to detach the volumes using the oldest instance manager pods so that Longhorn can clean up the old pods automatically and release the CPU resources. And the new pods with the latest instance manager image will be launched then. \n\n" +
			"  - This global setting will be ignored for a node if the field \"EngineManagerCPURequest\" on the node is set. \n\n" +
			"  - After this setting is changed, all engine manager pods using this global setting on all the nodes will be automatically restarted. In other words, DO NOT CHANGE THIS SETTING WITH ATTACHED VOLUMES. \n\n",
		Category: SettingCategoryDangerZone,
		Type:     SettingTypeString,
		Required: true,
		ReadOnly: false,
		Default:  "12",
	}

	SettingDefinitionGuaranteedReplicaManagerCPU = SettingDefinition{
		DisplayName: "Guaranteed Replica Manager CPU",
		Description: "This integer value indicates how many percentage of the total allocatable CPU on each node will be reserved for each replica manager Pod. 10 means 10% of the total CPU on a node will be allocated to each replica manager pod on this node. This will help maintain replica stability during high node workload. \n\n" +
			"In order to prevent unexpected volume replica crash as well as guarantee a relative acceptable IO performance, you can use the following formula to calculate a value for this setting: \n\n" +
			"Guaranteed Replica Manager CPU = The estimated max Longhorn volume replica count on a node * 0.1 / The total allocatable CPUs on the node * 100. \n\n" +
			"The result of above calculation doesn't mean that's the maximum CPU resources the Longhorn workloads require. To fully exploit the Longhorn volume I/O performance, you can allocate/guarantee more CPU resources via this setting. \n\n" +
			"If it's hard to estimate the usage now, you can leave it with the default value, which is 12%. Then you can tune it when there is no running workload using Longhorn volumes. \n\n" +
			"WARNING: \n\n" +
			"  - Value 0 means unsetting CPU requests for replica manager pods. \n\n" +
			"  - Considering the possible new instance manager pods in the further system upgrade, this integer value is range from 0 to 40. And the sum with setting 'Guaranteed Replica Manager CPU' should not be greater than 40. \n\n" +
			"  - One more set of instance manager pods may need to be deployed when the Longhorn system is upgraded. If current available CPUs of the nodes are not enough for the new instance manager pods, you need to detach the volumes using the oldest instance manager pods so that Longhorn can clean up the old pods automatically and release the CPU resources. And the new pods with the latest instance manager image will be launched then. \n\n" +
			"  - This global setting will be ignored for a node if the field \"ReplicaManagerCPURequest\" on the node is set. \n\n" +
			"  - After this setting is changed, all replica manager pods using this global setting on all the nodes will be automatically restarted. In other words, DO NOT CHANGE THIS SETTING WITH ATTACHED VOLUMES. \n\n",
		Category: SettingCategoryDangerZone,
		Type:     SettingTypeString,
		Required: true,
		ReadOnly: false,
		Default:  "12",
	}
)
View Source 
var (
	LonghornSystemKey = "longhorn"
)
View Source 
var (
	SettingNameList = []SettingName{
		SettingNameBackupTarget,
		SettingNameBackupTargetCredentialSecret,
		SettingNameAllowRecurringJobWhileVolumeDetached,
		SettingNameCreateDefaultDiskLabeledNodes,
		SettingNameDefaultDataPath,
		SettingNameDefaultEngineImage,
		SettingNameDefaultInstanceManagerImage,
		SettingNameDefaultShareManagerImage,
		SettingNameDefaultBackingImageManagerImage,
		SettingNameReplicaSoftAntiAffinity,
		SettingNameReplicaAutoBalance,
		SettingNameStorageOverProvisioningPercentage,
		SettingNameStorageMinimalAvailablePercentage,
		SettingNameUpgradeChecker,
		SettingNameCurrentLonghornVersion,
		SettingNameLatestLonghornVersion,
		SettingNameStableLonghornVersions,
		SettingNameDefaultReplicaCount,
		SettingNameDefaultDataLocality,
		SettingNameGuaranteedEngineCPU,
		SettingNameDefaultLonghornStaticStorageClass,
		SettingNameBackupstorePollInterval,
		SettingNameTaintToleration,
		SettingNameSystemManagedComponentsNodeSelector,
		SettingNameCRDAPIVersion,
		SettingNameAutoSalvage,
		SettingNameAutoDeletePodWhenVolumeDetachedUnexpectedly,
		SettingNameRegistrySecret,
		SettingNameDisableSchedulingOnCordonedNode,
		SettingNameReplicaZoneSoftAntiAffinity,
		SettingNameVolumeAttachmentRecoveryPolicy,
		SettingNameNodeDownPodDeletionPolicy,
		SettingNameAllowNodeDrainWithLastHealthyReplica,
		SettingNameMkfsExt4Parameters,
		SettingNamePriorityClass,
		SettingNameDisableRevisionCounter,
		SettingNameDisableReplicaRebuild,
		SettingNameReplicaReplenishmentWaitInterval,
		SettingNameConcurrentReplicaRebuildPerNodeLimit,
		SettingNameSystemManagedPodsImagePullPolicy,
		SettingNameAllowVolumeCreationWithDegradedAvailability,
		SettingNameAutoCleanupSystemGeneratedSnapshot,
		SettingNameConcurrentAutomaticEngineUpgradePerNodeLimit,
		SettingNameBackingImageCleanupWaitInterval,
		SettingNameBackingImageRecoveryWaitInterval,
		SettingNameGuaranteedEngineManagerCPU,
		SettingNameGuaranteedReplicaManagerCPU,
	}
)

Functions

func CreateDefaultDisk added in v0.8.1 

func CreateDefaultDisk(dataPath string) (map[string]longhorn.DiskSpec, error)

func CreateDisksFromAnnotation added in v0.8.1 

func CreateDisksFromAnnotation(annotation string) (map[string]longhorn.DiskSpec, error)

func EngineBinaryExistOnHostForImage 

func EngineBinaryExistOnHostForImage(image string) bool

func ErrorAlreadyExists added in v0.6.0 

func ErrorAlreadyExists(err error) bool

func ErrorIsNotFound added in v0.6.0 

func ErrorIsNotFound(err error) bool

func GenerateEngineNameForVolume 

func GenerateEngineNameForVolume(vName string) string

func GenerateReplicaNameForVolume 

func GenerateReplicaNameForVolume(vName string) string

func GetAPIServerAddressFromIP 

func GetAPIServerAddressFromIP(ip string) string

func GetBackingImageDataSourceLabels added in v1.2.0 

func GetBackingImageDataSourceLabels(name, nodeID, diskUUID string) map[string]string

func GetBackingImageDataSourcePodName added in v1.2.0 

func GetBackingImageDataSourcePodName(bidsName string) string

func GetBackingImageDirectoryName added in v1.1.1 

func GetBackingImageDirectoryName(backingImageName, backingImageUUID string) string

func GetBackingImageDirectoryOnHost added in v1.1.1 

func GetBackingImageDirectoryOnHost(diskPath, backingImageName, backingImageUUID string) string

func GetBackingImageLabels added in v1.1.1 

func GetBackingImageLabels() map[string]string

func GetBackingImageManagerDirectoryOnHost added in v1.1.1 

func GetBackingImageManagerDirectoryOnHost(diskPath string) string

func GetBackingImageManagerLabels added in v1.1.1 

func GetBackingImageManagerLabels(nodeID, diskUUID string) map[string]string

func GetBackingImageManagerName added in v1.1.1 

func GetBackingImageManagerName(image, diskUUID string) string

func GetBackingImagePathForReplicaManagerContainer added in v1.1.1 

func GetBackingImagePathForReplicaManagerContainer(diskPath, backingImageName, backingImageUUID string) string

func GetBackupVolumeLabels added in v1.2.0 

func GetBackupVolumeLabels(volumeName string) map[string]string

func GetBaseLabelsForSystemManagedComponent added in v1.1.1 

func GetBaseLabelsForSystemManagedComponent() map[string]string

func GetCondition added in v0.8.1 

func GetCondition(conditions map[string]longhorn.Condition, conditionType string) longhorn.Condition

GetCondition returns a copy of conditions[conditionType], and automatically fill the unknown condition

func GetCronJobLabels added in v1.1.2 

func GetCronJobLabels(job *longhorn.RecurringJobSpec) map[string]string

func GetCronJobNameForRecurringJob added in v1.2.0 

func GetCronJobNameForRecurringJob(name string) string

func GetCronJobNameForVolumeAndJob 

func GetCronJobNameForVolumeAndJob(vName, job string) string

func GetCustomizedDefaultSettings added in v0.6.0 

func GetCustomizedDefaultSettings() (map[string]string, error)

func GetDaemonSetNameFromEngineImageName added in v0.6.0 

func GetDaemonSetNameFromEngineImageName(engineImageName string) string

func GetDefaultManagerURL added in v1.0.1 

func GetDefaultManagerURL() string

func GetEIDaemonSetLabelSelector added in v1.1.1 

func GetEIDaemonSetLabelSelector(engineImageName string) map[string]string

GetEIDaemonSetLabelSelector returns labels for engine image daemonset's Spec.Selector.MatchLabels

func GetEngineBinaryDirectoryForEngineManagerContainer added in v0.8.0 

func GetEngineBinaryDirectoryForEngineManagerContainer(image string) string

func GetEngineBinaryDirectoryForReplicaManagerContainer added in v0.8.0 

func GetEngineBinaryDirectoryForReplicaManagerContainer(image string) string

func GetEngineBinaryDirectoryOnHostForImage 

func GetEngineBinaryDirectoryOnHostForImage(image string) string

func GetEngineImageChecksumName 

func GetEngineImageChecksumName(image string) string

func GetEngineImageComponentLabel added in v1.1.1 

func GetEngineImageComponentLabel() map[string]string

func GetEngineImageLabels added in v0.6.0 

func GetEngineImageLabels(engineImageName string) map[string]string

func GetEngineImageNameFromDaemonSetName added in v0.6.0 

func GetEngineImageNameFromDaemonSetName(dsName string) string

func GetImageCanonicalName 

func GetImageCanonicalName(image string) string

func GetInstanceManagerComponentLabel added in v0.6.0 

func GetInstanceManagerComponentLabel() map[string]string

func GetInstanceManagerImageChecksumName added in v1.0.1 

func GetInstanceManagerImageChecksumName(image string) string

func GetInstanceManagerLabels added in v0.6.0 

func GetInstanceManagerLabels(node, instanceManagerImage string, managerType longhorn.InstanceManagerType) map[string]string

func GetInstanceManagerName added in v0.8.0 

func GetInstanceManagerName(imType longhorn.InstanceManagerType) (string, error)

func GetInstanceManagerPrefix added in v1.1.0 

func GetInstanceManagerPrefix(imType longhorn.InstanceManagerType) string

func GetLonghornLabelComponentKey added in v0.6.0 

func GetLonghornLabelComponentKey() string

func GetLonghornLabelKey added in v0.6.0 

func GetLonghornLabelKey(name string) string

func GetNodeTagsFromAnnotation added in v0.8.1 

func GetNodeTagsFromAnnotation(annotation string) ([]string, error)

func GetRecurringJobLabelKey added in v1.2.0 

func GetRecurringJobLabelKey(labelType, recurringJobName string) string

func GetRecurringJobLabelValueMap added in v1.2.0 

func GetRecurringJobLabelValueMap(labelType, recurringJobName string) map[string]string

func GetRegionAndZone added in v0.8.0 

func GetRegionAndZone(labels map[string]string) (string, string)

func GetReplicaDataPath added in v1.1.0 

func GetReplicaDataPath(diskPath, dataDirectoryName string) string

func GetReplicaMountedDataPath added in v0.6.0 

func GetReplicaMountedDataPath(dataPath string) string

func GetShareManagerComponentLabel added in v1.1.0 

func GetShareManagerComponentLabel() map[string]string

func GetShareManagerImageChecksumName added in v1.1.0 

func GetShareManagerImageChecksumName(image string) string

func GetShareManagerInstanceLabel added in v1.1.0 

func GetShareManagerInstanceLabel(name string) map[string]string

func GetShareManagerLabels added in v1.1.0 

func GetShareManagerLabels(name, image string) map[string]string

func GetShareManagerNameFromShareManagerPodName added in v1.1.1 

func GetShareManagerNameFromShareManagerPodName(podName string) string

func GetShareManagerPodNameFromShareManagerName added in v1.1.1 

func GetShareManagerPodNameFromShareManagerName(smName string) string

func GetSnapshotName added in v1.2.3 

func GetSnapshotName(vds longhorn.VolumeDataSource) string

func GetVolumeLabels added in v0.7.0 

func GetVolumeLabels(volumeName string) map[string]string

func GetVolumeName added in v1.2.3 

func GetVolumeName(vds longhorn.VolumeDataSource) string

func IsDataFromVolume added in v1.2.3 

func IsDataFromVolume(vds longhorn.VolumeDataSource) bool

func IsValidVolumeDataSource added in v1.2.0 

func IsValidVolumeDataSource(vds longhorn.VolumeDataSource) bool

func LabelsToString added in v0.7.0 

func LabelsToString(labels map[string]string) string

func NewVolumeDataSource added in v1.2.0 

func NewVolumeDataSource(volumeDataSourceType string, parameters map[string]string) (dataSource longhorn.VolumeDataSource, err error)

func NewVolumeDataSourceTypeSnapshot added in v1.2.0 

func NewVolumeDataSourceTypeSnapshot(volumeName, snapshotName string) longhorn.VolumeDataSource

func NewVolumeDataSourceTypeVolume added in v1.2.0 

func NewVolumeDataSourceTypeVolume(volumeName string) longhorn.VolumeDataSource

func OverwriteBuiltInSettingsWithCustomizedValues added in v0.6.0 

func OverwriteBuiltInSettingsWithCustomizedValues() error

func SetCondition added in v0.8.1 

func SetCondition(originConditions map[string]longhorn.Condition, conditionType string, conditionValue longhorn.ConditionStatus, reason, message string) map[string]longhorn.Condition

func SetConditionAndRecord added in v0.8.1 

func SetConditionAndRecord(conditions map[string]longhorn.Condition, conditionType string, conditionValue longhorn.ConditionStatus,
	reason, message string, eventRecorder record.EventRecorder, obj runtime.Object, eventtype string) map[string]longhorn.Condition

func UnmarshalNodeSelector added in v1.1.1 

func UnmarshalNodeSelector(nodeSelectorSetting string) (map[string]string, error)

func UnmarshalToNodeTags added in v0.8.1 

func UnmarshalToNodeTags(s string) ([]string, error)

UnmarshalToNodeTags input format should be: `["worker1","enabled"]`

func UnmarshalTolerations added in v0.6.0 

func UnmarshalTolerations(tolerationSetting string) ([]v1.Toleration, error)

func ValidateAccessMode added in v1.1.0 

func ValidateAccessMode(mode longhorn.AccessMode) error

func ValidateAndUnmarshalToleration added in v0.6.0 

func ValidateAndUnmarshalToleration(s string) (*v1.Toleration, error)

func ValidateCPUReservationValues added in v1.1.1 

func ValidateCPUReservationValues(engineManagerCPUStr, replicaManagerCPUStr string) error

func ValidateDataLocality added in v1.1.0 

func ValidateDataLocality(mode longhorn.DataLocality) error

func ValidateEngineImageChecksumName added in v0.8.0 

func ValidateEngineImageChecksumName(name string) bool

func ValidateInitSetting added in v0.6.0 

func ValidateInitSetting(name, value string) (err error)

func ValidateReplicaAutoBalance added in v1.2.0 

func ValidateReplicaAutoBalance(option longhorn.ReplicaAutoBalance) error

func ValidateReplicaCount added in v0.6.0 

func ValidateReplicaCount(count int) error

Types

type DiskSpecWithName added in v0.8.1 

type DiskSpecWithName struct {
	longhorn.DiskSpec
	Name string `json:"name"`
}

func UnmarshalToDisks added in v0.8.1 

func UnmarshalToDisks(s string) (ret []DiskSpecWithName, err error)

UnmarshalToDisks input format should be: `[{"path":"/mnt/disk1","allowScheduling":false}, 

{"path":"/mnt/disk2","allowScheduling":false,"storageReserved":1024,"tags":["ssd","fast"]}]`

type NodeDownPodDeletionPolicy added in v1.1.0 

type NodeDownPodDeletionPolicy string

type NotFoundError 

type NotFoundError struct {
	Name string
}

func (*NotFoundError) Error 

func (e *NotFoundError) Error() string

type SettingCategory 

type SettingCategory string

type SettingDefinition 

type SettingDefinition struct {
	DisplayName string          `json:"displayName"`
	Description string          `json:"description"`
	Category    SettingCategory `json:"category"`
	Type        SettingType     `json:"type"`
	Required    bool            `json:"required"`
	ReadOnly    bool            `json:"readOnly"`
	Default     string          `json:"default"`
	Choices     []string        `json:"options,omitempty"` // +optional
}

type SettingName 

type SettingName string

type SettingType 

type SettingType string

type SystemManagedPodsImagePullPolicy added in v1.1.0 

type SystemManagedPodsImagePullPolicy string

type VolumeAttachmentRecoveryPolicy added in v1.0.0 

type VolumeAttachmentRecoveryPolicy string

Source Files

View all Source files

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL
go.dev uses cookies from Google to deliver and enhance the quality of its services and to analyze traffic. Learn more.