glacier

package
v0.4.0 Latest Latest
Warning

This package is not in the latest version of its module.

 Go to latest Published: May 26, 2018 License: Apache-2.0 Imports: 11 Imported by: 0

Documentation

Overview

Package glacier provides the client and types for making API requests to Amazon Glacier.

Amazon Glacier is a storage solution for "cold data."

Amazon Glacier is an extremely low-cost storage service that provides secure, durable, and easy-to-use storage for data backup and archival. With Amazon Glacier, customers can store their data cost effectively for months, years, or decades. Amazon Glacier also enables customers to offload the administrative burdens of operating and scaling storage to AWS, so they don't have to worry about capacity planning, hardware provisioning, data replication, hardware failure and recovery, or time-consuming hardware migrations.

Amazon Glacier is a great storage choice when low storage cost is paramount, your data is rarely retrieved, and retrieval latency of several hours is acceptable. If your application requires fast or frequent access to your data, consider using Amazon S3. For more information, see Amazon Simple Storage Service (Amazon S3) (http://aws.amazon.com/s3/).

You can store any kind of data in any format. There is no maximum limit on the total amount of data you can store in Amazon Glacier.

If you are a first-time user of Amazon Glacier, we recommend that you begin by reading the following sections in the Amazon Glacier Developer Guide:

See glacier package documentation for more information. https://docs.aws.amazon.com/sdk-for-go/api/service/glacier/

Using the Client

To Amazon Glacier with the SDK use the New function to create a new service client. With that client you can make API requests to the service. These clients are safe to use concurrently.

See the SDK's documentation for more information on how to use the SDK. https://docs.aws.amazon.com/sdk-for-go/api/

See aws.Config documentation for more information on configuring SDK clients. https://docs.aws.amazon.com/sdk-for-go/api/aws/#Config

See the Amazon Glacier client Glacier for more information on creating client for this service. https://docs.aws.amazon.com/sdk-for-go/api/service/glacier/#New

Index

Examples

Constants

View Source 
const (

	// ErrCodeInsufficientCapacityException for service response error code
	// "InsufficientCapacityException".
	//
	// Returned if there is insufficient capacity to process this expedited request.
	// This error only applies to expedited retrievals and not to standard or bulk
	// retrievals.
	ErrCodeInsufficientCapacityException = "InsufficientCapacityException"

	// ErrCodeInvalidParameterValueException for service response error code
	// "InvalidParameterValueException".
	//
	// Returned if a parameter of the request is incorrectly specified.
	ErrCodeInvalidParameterValueException = "InvalidParameterValueException"

	// ErrCodeLimitExceededException for service response error code
	// "LimitExceededException".
	//
	// Returned if the request results in a vault or account limit being exceeded.
	ErrCodeLimitExceededException = "LimitExceededException"

	// ErrCodeMissingParameterValueException for service response error code
	// "MissingParameterValueException".
	//
	// Returned if a required header or parameter is missing from the request.
	ErrCodeMissingParameterValueException = "MissingParameterValueException"

	// ErrCodePolicyEnforcedException for service response error code
	// "PolicyEnforcedException".
	//
	// Returned if a retrieval job would exceed the current data policy's retrieval
	// rate limit. For more information about data retrieval policies,
	ErrCodePolicyEnforcedException = "PolicyEnforcedException"

	// ErrCodeRequestTimeoutException for service response error code
	// "RequestTimeoutException".
	//
	// Returned if, when uploading an archive, Amazon Glacier times out while receiving
	// the upload.
	ErrCodeRequestTimeoutException = "RequestTimeoutException"

	// ErrCodeResourceNotFoundException for service response error code
	// "ResourceNotFoundException".
	//
	// Returned if the specified resource (such as a vault, upload ID, or job ID)
	// doesn't exist.
	ErrCodeResourceNotFoundException = "ResourceNotFoundException"

	// ErrCodeServiceUnavailableException for service response error code
	// "ServiceUnavailableException".
	//
	// Returned if the service cannot complete the request.
	ErrCodeServiceUnavailableException = "ServiceUnavailableException"
)
View Source 
const (
	ServiceName = "glacier"   // Service endpoint prefix API calls made to.
	EndpointsID = ServiceName // Service ID for Regions and Endpoints metadata.
)

Service information constants

Variables

This section is empty.

Functions

func ComputeTreeHash 

func ComputeTreeHash(hashes [][]byte) []byte

ComputeTreeHash builds a tree hash root node given a slice of hashes. Glacier tree hash to be derived from SHA256 hashes of 1MB chucks of the data.

See http://docs.aws.amazon.com/amazonglacier/latest/dev/checksum-calculations.html for more information.

Example 
package main

import (
	"bytes"
	"crypto/sha256"
	"fmt"
	"io"

	"github.com/aws/aws-sdk-go-v2/service/glacier"
)

func testCreateReader() io.ReadSeeker {
	buf := make([]byte, 5767168)
	for i := range buf {
		buf[i] = '0'
	}

	return bytes.NewReader(buf)
}

func main() {
	r := testCreateReader()

	const chunkSize = 1024 * 1024 // 1MB
	buf := make([]byte, chunkSize)
	hashes := [][]byte{}

	for {
		// Reach 1MB chunks from reader to generate hashes from
		n, err := io.ReadAtLeast(r, buf, chunkSize)
		if n == 0 {
			break
		}

		tmpHash := sha256.Sum256(buf[:n])
		hashes = append(hashes, tmpHash[:])
		if err != nil {
			break // last chunk
		}
	}

	treeHash := glacier.ComputeTreeHash(hashes)
	fmt.Printf("TreeHash: %x\n", treeHash)

}

Output:

TreeHash: 154e26c78fd74d0c2c9b3cc4644191619dc4f2cd539ae2a74d5fd07957a3ee6a

Types

type AbortMultipartUploadInput 

type AbortMultipartUploadInput struct {

	// The AccountId value is the AWS account ID of the account that owns the vault.
	// You can either specify an AWS account ID or optionally a single '-' (hyphen),
	// in which case Amazon Glacier uses the AWS account ID associated with the
	// credentials used to sign the request. If you use an account ID, do not include
	// any hyphens ('-') in the ID.
	//
	// AccountId is a required field
	AccountId *string `location:"uri" locationName:"accountId" type:"string" required:"true"`

	// The upload ID of the multipart upload to delete.
	//
	// UploadId is a required field
	UploadId *string `location:"uri" locationName:"uploadId" type:"string" required:"true"`

	// The name of the vault.
	//
	// VaultName is a required field
	VaultName *string `location:"uri" locationName:"vaultName" type:"string" required:"true"`
	// contains filtered or unexported fields
}

Provides options to abort a multipart upload identified by the upload ID.

For information about the underlying REST API, see Abort Multipart Upload (http://docs.aws.amazon.com/amazonglacier/latest/dev/api-multipart-abort-upload.html). For conceptual information, see Working with Archives in Amazon Glacier (http://docs.aws.amazon.com/amazonglacier/latest/dev/working-with-archives.html).

func (AbortMultipartUploadInput) GoString 

func (s AbortMultipartUploadInput) GoString() string

GoString returns the string representation

func (AbortMultipartUploadInput) MarshalFields 

func (s AbortMultipartUploadInput) MarshalFields(e protocol.FieldEncoder) error

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (AbortMultipartUploadInput) String 

func (s AbortMultipartUploadInput) String() string

String returns the string representation

func (*AbortMultipartUploadInput) Validate 

func (s *AbortMultipartUploadInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type AbortMultipartUploadOutput 

type AbortMultipartUploadOutput struct {
	// contains filtered or unexported fields
}

func (AbortMultipartUploadOutput) GoString 

func (s AbortMultipartUploadOutput) GoString() string

GoString returns the string representation

func (AbortMultipartUploadOutput) MarshalFields 

func (s AbortMultipartUploadOutput) MarshalFields(e protocol.FieldEncoder) error

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (AbortMultipartUploadOutput) SDKResponseMetadata 

func (s AbortMultipartUploadOutput) SDKResponseMetadata() aws.Response

SDKResponseMetdata return sthe response metadata for the API.

func (AbortMultipartUploadOutput) String 

func (s AbortMultipartUploadOutput) String() string

String returns the string representation

type AbortMultipartUploadRequest 

type AbortMultipartUploadRequest struct {
	*aws.Request
	Input *AbortMultipartUploadInput
	Copy  func(*AbortMultipartUploadInput) AbortMultipartUploadRequest
}

AbortMultipartUploadRequest is a API request type for the AbortMultipartUpload API operation.

func (AbortMultipartUploadRequest) Send 

func (r AbortMultipartUploadRequest) Send() (*AbortMultipartUploadOutput, error)

Send marshals and sends the AbortMultipartUpload API request.

type AbortVaultLockInput 

type AbortVaultLockInput struct {

	// The AccountId value is the AWS account ID. This value must match the AWS
	// account ID associated with the credentials used to sign the request. You
	// can either specify an AWS account ID or optionally a single '-' (hyphen),
	// in which case Amazon Glacier uses the AWS account ID associated with the
	// credentials used to sign the request. If you specify your account ID, do
	// not include any hyphens ('-') in the ID.
	//
	// AccountId is a required field
	AccountId *string `location:"uri" locationName:"accountId" type:"string" required:"true"`

	// The name of the vault.
	//
	// VaultName is a required field
	VaultName *string `location:"uri" locationName:"vaultName" type:"string" required:"true"`
	// contains filtered or unexported fields
}

The input values for AbortVaultLock.

func (AbortVaultLockInput) GoString 

func (s AbortVaultLockInput) GoString() string

GoString returns the string representation

func (AbortVaultLockInput) MarshalFields 

func (s AbortVaultLockInput) MarshalFields(e protocol.FieldEncoder) error

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (AbortVaultLockInput) String 

func (s AbortVaultLockInput) String() string

String returns the string representation

func (*AbortVaultLockInput) Validate 

func (s *AbortVaultLockInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type AbortVaultLockOutput 

type AbortVaultLockOutput struct {
	// contains filtered or unexported fields
}

func (AbortVaultLockOutput) GoString 

func (s AbortVaultLockOutput) GoString() string

GoString returns the string representation

func (AbortVaultLockOutput) MarshalFields 

func (s AbortVaultLockOutput) MarshalFields(e protocol.FieldEncoder) error

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (AbortVaultLockOutput) SDKResponseMetadata 

func (s AbortVaultLockOutput) SDKResponseMetadata() aws.Response

SDKResponseMetdata return sthe response metadata for the API.

func (AbortVaultLockOutput) String 

func (s AbortVaultLockOutput) String() string

String returns the string representation

type AbortVaultLockRequest 

type AbortVaultLockRequest struct {
	*aws.Request
	Input *AbortVaultLockInput
	Copy  func(*AbortVaultLockInput) AbortVaultLockRequest
}

AbortVaultLockRequest is a API request type for the AbortVaultLock API operation.

func (AbortVaultLockRequest) Send 

func (r AbortVaultLockRequest) Send() (*AbortVaultLockOutput, error)

Send marshals and sends the AbortVaultLock API request.

type ActionCode 

type ActionCode string
const (
	ActionCodeArchiveRetrieval   ActionCode = "ArchiveRetrieval"
	ActionCodeInventoryRetrieval ActionCode = "InventoryRetrieval"
	ActionCodeSelect             ActionCode = "Select"
)

Enum values for ActionCode

func (ActionCode) MarshalValue 

func (enum ActionCode) MarshalValue() (string, error)

func (ActionCode) MarshalValueBuf 

func (enum ActionCode) MarshalValueBuf(b []byte) ([]byte, error)

type AddTagsToVaultInput 

type AddTagsToVaultInput struct {

	// The AccountId value is the AWS account ID of the account that owns the vault.
	// You can either specify an AWS account ID or optionally a single '-' (hyphen),
	// in which case Amazon Glacier uses the AWS account ID associated with the
	// credentials used to sign the request. If you use an account ID, do not include
	// any hyphens ('-') in the ID.
	//
	// AccountId is a required field
	AccountId *string `location:"uri" locationName:"accountId" type:"string" required:"true"`

	// The tags to add to the vault. Each tag is composed of a key and a value.
	// The value can be an empty string.
	Tags map[string]string `type:"map"`

	// The name of the vault.
	//
	// VaultName is a required field
	VaultName *string `location:"uri" locationName:"vaultName" type:"string" required:"true"`
	// contains filtered or unexported fields
}

The input values for AddTagsToVault.

func (AddTagsToVaultInput) GoString 

func (s AddTagsToVaultInput) GoString() string

GoString returns the string representation

func (AddTagsToVaultInput) MarshalFields 

func (s AddTagsToVaultInput) MarshalFields(e protocol.FieldEncoder) error

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (AddTagsToVaultInput) String 

func (s AddTagsToVaultInput) String() string

String returns the string representation

func (*AddTagsToVaultInput) Validate 

func (s *AddTagsToVaultInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type AddTagsToVaultOutput 

type AddTagsToVaultOutput struct {
	// contains filtered or unexported fields
}

func (AddTagsToVaultOutput) GoString 

func (s AddTagsToVaultOutput) GoString() string

GoString returns the string representation

func (AddTagsToVaultOutput) MarshalFields 

func (s AddTagsToVaultOutput) MarshalFields(e protocol.FieldEncoder) error

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (AddTagsToVaultOutput) SDKResponseMetadata 

func (s AddTagsToVaultOutput) SDKResponseMetadata() aws.Response

SDKResponseMetdata return sthe response metadata for the API.

func (AddTagsToVaultOutput) String 

func (s AddTagsToVaultOutput) String() string

String returns the string representation

type AddTagsToVaultRequest 

type AddTagsToVaultRequest struct {
	*aws.Request
	Input *AddTagsToVaultInput
	Copy  func(*AddTagsToVaultInput) AddTagsToVaultRequest
}

AddTagsToVaultRequest is a API request type for the AddTagsToVault API operation.

func (AddTagsToVaultRequest) Send 

func (r AddTagsToVaultRequest) Send() (*AddTagsToVaultOutput, error)

Send marshals and sends the AddTagsToVault API request.

type CSVInput 

type CSVInput struct {

	// A single character used to indicate that a row should be ignored when the
	// character is present at the start of that row.
	Comments *string `type:"string"`

	// A value used to separate individual fields from each other within a record.
	FieldDelimiter *string `type:"string"`

	// Describes the first line of input. Valid values are None, Ignore, and Use.
	FileHeaderInfo FileHeaderInfo `type:"string" enum:"true"`

	// A value used as an escape character where the field delimiter is part of
	// the value.
	QuoteCharacter *string `type:"string"`

	// A single character used for escaping the quotation-mark character inside
	// an already escaped value.
	QuoteEscapeCharacter *string `type:"string"`

	// A value used to separate individual records from each other.
	RecordDelimiter *string `type:"string"`
	// contains filtered or unexported fields
}

Contains information about the comma-separated value (CSV) file to select from.

func (CSVInput) GoString 

func (s CSVInput) GoString() string

GoString returns the string representation

func (CSVInput) MarshalFields 

func (s CSVInput) MarshalFields(e protocol.FieldEncoder) error

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (CSVInput) String 

func (s CSVInput) String() string

String returns the string representation

type CSVOutput 

type CSVOutput struct {

	// A value used to separate individual fields from each other within a record.
	FieldDelimiter *string `type:"string"`

	// A value used as an escape character where the field delimiter is part of
	// the value.
	QuoteCharacter *string `type:"string"`

	// A single character used for escaping the quotation-mark character inside
	// an already escaped value.
	QuoteEscapeCharacter *string `type:"string"`

	// A value that indicates whether all output fields should be contained within
	// quotation marks.
	QuoteFields QuoteFields `type:"string" enum:"true"`

	// A value used to separate individual records from each other.
	RecordDelimiter *string `type:"string"`
	// contains filtered or unexported fields
}

Contains information about the comma-separated value (CSV) file that the job results are stored in.

func (CSVOutput) GoString 

func (s CSVOutput) GoString() string

GoString returns the string representation

func (CSVOutput) MarshalFields 

func (s CSVOutput) MarshalFields(e protocol.FieldEncoder) error

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (CSVOutput) String 

func (s CSVOutput) String() string

String returns the string representation

type CannedACL 

type CannedACL string
const (
	CannedACLPrivate                CannedACL = "private"
	CannedACLPublicRead             CannedACL = "public-read"
	CannedACLPublicReadWrite        CannedACL = "public-read-write"
	CannedACLAwsExecRead            CannedACL = "aws-exec-read"
	CannedACLAuthenticatedRead      CannedACL = "authenticated-read"
	CannedACLBucketOwnerRead        CannedACL = "bucket-owner-read"
	CannedACLBucketOwnerFullControl CannedACL = "bucket-owner-full-control"
)

Enum values for CannedACL

func (CannedACL) MarshalValue 

func (enum CannedACL) MarshalValue() (string, error)

func (CannedACL) MarshalValueBuf 

func (enum CannedACL) MarshalValueBuf(b []byte) ([]byte, error)

type CompleteMultipartUploadInput 

type CompleteMultipartUploadInput struct {

	// The AccountId value is the AWS account ID of the account that owns the vault.
	// You can either specify an AWS account ID or optionally a single '-' (hyphen),
	// in which case Amazon Glacier uses the AWS account ID associated with the
	// credentials used to sign the request. If you use an account ID, do not include
	// any hyphens ('-') in the ID.
	//
	// AccountId is a required field
	AccountId *string `location:"uri" locationName:"accountId" type:"string" required:"true"`

	// The total size, in bytes, of the entire archive. This value should be the
	// sum of all the sizes of the individual parts that you uploaded.
	ArchiveSize *string `location:"header" locationName:"x-amz-archive-size" type:"string"`

	// The SHA256 tree hash of the entire archive. It is the tree hash of SHA256
	// tree hash of the individual parts. If the value you specify in the request
	// does not match the SHA256 tree hash of the final assembled archive as computed
	// by Amazon Glacier, Amazon Glacier returns an error and the request fails.
	Checksum *string `location:"header" locationName:"x-amz-sha256-tree-hash" type:"string"`

	// The upload ID of the multipart upload.
	//
	// UploadId is a required field
	UploadId *string `location:"uri" locationName:"uploadId" type:"string" required:"true"`

	// The name of the vault.
	//
	// VaultName is a required field
	VaultName *string `location:"uri" locationName:"vaultName" type:"string" required:"true"`
	// contains filtered or unexported fields
}

Provides options to complete a multipart upload operation. This informs Amazon Glacier that all the archive parts have been uploaded and Amazon Glacier can now assemble the archive from the uploaded parts. After assembling and saving the archive to the vault, Amazon Glacier returns the URI path of the newly created archive resource.

func (CompleteMultipartUploadInput) GoString 

func (s CompleteMultipartUploadInput) GoString() string

GoString returns the string representation

func (CompleteMultipartUploadInput) MarshalFields 

func (s CompleteMultipartUploadInput) MarshalFields(e protocol.FieldEncoder) error

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (CompleteMultipartUploadInput) String 

func (s CompleteMultipartUploadInput) String() string

String returns the string representation

func (*CompleteMultipartUploadInput) Validate 

func (s *CompleteMultipartUploadInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type CompleteMultipartUploadRequest 

type CompleteMultipartUploadRequest struct {
	*aws.Request
	Input *CompleteMultipartUploadInput
	Copy  func(*CompleteMultipartUploadInput) CompleteMultipartUploadRequest
}

CompleteMultipartUploadRequest is a API request type for the CompleteMultipartUpload API operation.

func (CompleteMultipartUploadRequest) Send 

func (r CompleteMultipartUploadRequest) Send() (*UploadArchiveOutput, error)

Send marshals and sends the CompleteMultipartUpload API request.

type CompleteVaultLockInput 

type CompleteVaultLockInput struct {

	// The AccountId value is the AWS account ID. This value must match the AWS
	// account ID associated with the credentials used to sign the request. You
	// can either specify an AWS account ID or optionally a single '-' (hyphen),
	// in which case Amazon Glacier uses the AWS account ID associated with the
	// credentials used to sign the request. If you specify your account ID, do
	// not include any hyphens ('-') in the ID.
	//
	// AccountId is a required field
	AccountId *string `location:"uri" locationName:"accountId" type:"string" required:"true"`

	// The lockId value is the lock ID obtained from a InitiateVaultLock request.
	//
	// LockId is a required field
	LockId *string `location:"uri" locationName:"lockId" type:"string" required:"true"`

	// The name of the vault.
	//
	// VaultName is a required field
	VaultName *string `location:"uri" locationName:"vaultName" type:"string" required:"true"`
	// contains filtered or unexported fields
}

The input values for CompleteVaultLock.

func (CompleteVaultLockInput) GoString 

func (s CompleteVaultLockInput) GoString() string

GoString returns the string representation

func (CompleteVaultLockInput) MarshalFields 

func (s CompleteVaultLockInput) MarshalFields(e protocol.FieldEncoder) error

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (CompleteVaultLockInput) String 

func (s CompleteVaultLockInput) String() string

String returns the string representation

func (*CompleteVaultLockInput) Validate 

func (s *CompleteVaultLockInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type CompleteVaultLockOutput 

type CompleteVaultLockOutput struct {
	// contains filtered or unexported fields
}

func (CompleteVaultLockOutput) GoString 

func (s CompleteVaultLockOutput) GoString() string

GoString returns the string representation

func (CompleteVaultLockOutput) MarshalFields 

func (s CompleteVaultLockOutput) MarshalFields(e protocol.FieldEncoder) error

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (CompleteVaultLockOutput) SDKResponseMetadata 

func (s CompleteVaultLockOutput) SDKResponseMetadata() aws.Response

SDKResponseMetdata return sthe response metadata for the API.

func (CompleteVaultLockOutput) String 

func (s CompleteVaultLockOutput) String() string

String returns the string representation

type CompleteVaultLockRequest 

type CompleteVaultLockRequest struct {
	*aws.Request
	Input *CompleteVaultLockInput
	Copy  func(*CompleteVaultLockInput) CompleteVaultLockRequest
}

CompleteVaultLockRequest is a API request type for the CompleteVaultLock API operation.

func (CompleteVaultLockRequest) Send 

func (r CompleteVaultLockRequest) Send() (*CompleteVaultLockOutput, error)

Send marshals and sends the CompleteVaultLock API request.

type CreateVaultInput 

type CreateVaultInput struct {

	// The AccountId value is the AWS account ID. This value must match the AWS
	// account ID associated with the credentials used to sign the request. You
	// can either specify an AWS account ID or optionally a single '-' (hyphen),
	// in which case Amazon Glacier uses the AWS account ID associated with the
	// credentials used to sign the request. If you specify your account ID, do
	// not include any hyphens ('-') in the ID.
	//
	// AccountId is a required field
	AccountId *string `location:"uri" locationName:"accountId" type:"string" required:"true"`

	// The name of the vault.
	//
	// VaultName is a required field
	VaultName *string `location:"uri" locationName:"vaultName" type:"string" required:"true"`
	// contains filtered or unexported fields
}

Provides options to create a vault.

func (CreateVaultInput) GoString 

func (s CreateVaultInput) GoString() string

GoString returns the string representation

func (CreateVaultInput) MarshalFields 

func (s CreateVaultInput) MarshalFields(e protocol.FieldEncoder) error

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (CreateVaultInput) String 

func (s CreateVaultInput) String() string

String returns the string representation

func (*CreateVaultInput) Validate 

func (s *CreateVaultInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type CreateVaultOutput 

type CreateVaultOutput struct {

	// The URI of the vault that was created.
	Location *string `location:"header" locationName:"Location" type:"string"`
	// contains filtered or unexported fields
}

Contains the Amazon Glacier response to your request.

func (CreateVaultOutput) GoString 

func (s CreateVaultOutput) GoString() string

GoString returns the string representation

func (CreateVaultOutput) MarshalFields 

func (s CreateVaultOutput) MarshalFields(e protocol.FieldEncoder) error

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (CreateVaultOutput) SDKResponseMetadata 

func (s CreateVaultOutput) SDKResponseMetadata() aws.Response

SDKResponseMetdata return sthe response metadata for the API.

func (CreateVaultOutput) String 

func (s CreateVaultOutput) String() string

String returns the string representation

type CreateVaultRequest 

type CreateVaultRequest struct {
	*aws.Request
	Input *CreateVaultInput
	Copy  func(*CreateVaultInput) CreateVaultRequest
}

CreateVaultRequest is a API request type for the CreateVault API operation.

func (CreateVaultRequest) Send 

func (r CreateVaultRequest) Send() (*CreateVaultOutput, error)

Send marshals and sends the CreateVault API request.

type DataRetrievalPolicy 

type DataRetrievalPolicy struct {

	// The policy rule. Although this is a list type, currently there must be only
	// one rule, which contains a Strategy field and optionally a BytesPerHour field.
	Rules []DataRetrievalRule `type:"list"`
	// contains filtered or unexported fields
}

Data retrieval policy.

func (DataRetrievalPolicy) GoString 

func (s DataRetrievalPolicy) GoString() string

GoString returns the string representation

func (DataRetrievalPolicy) MarshalFields 

func (s DataRetrievalPolicy) MarshalFields(e protocol.FieldEncoder) error

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (DataRetrievalPolicy) String 

func (s DataRetrievalPolicy) String() string

String returns the string representation

type DataRetrievalRule 

type DataRetrievalRule struct {

	// The maximum number of bytes that can be retrieved in an hour.
	//
	// This field is required only if the value of the Strategy field is BytesPerHour.
	// Your PUT operation will be rejected if the Strategy field is not set to BytesPerHour
	// and you set this field.
	BytesPerHour *int64 `type:"long"`

	// The type of data retrieval policy to set.
	//
	// Valid values: BytesPerHour|FreeTier|None
	Strategy *string `type:"string"`
	// contains filtered or unexported fields
}

Data retrieval policy rule.

func (DataRetrievalRule) GoString 

func (s DataRetrievalRule) GoString() string

GoString returns the string representation

func (DataRetrievalRule) MarshalFields 

func (s DataRetrievalRule) MarshalFields(e protocol.FieldEncoder) error

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (DataRetrievalRule) String 

func (s DataRetrievalRule) String() string

String returns the string representation

type DeleteArchiveInput 

type DeleteArchiveInput struct {

	// The AccountId value is the AWS account ID of the account that owns the vault.
	// You can either specify an AWS account ID or optionally a single '-' (hyphen),
	// in which case Amazon Glacier uses the AWS account ID associated with the
	// credentials used to sign the request. If you use an account ID, do not include
	// any hyphens ('-') in the ID.
	//
	// AccountId is a required field
	AccountId *string `location:"uri" locationName:"accountId" type:"string" required:"true"`

	// The ID of the archive to delete.
	//
	// ArchiveId is a required field
	ArchiveId *string `location:"uri" locationName:"archiveId" type:"string" required:"true"`

	// The name of the vault.
	//
	// VaultName is a required field
	VaultName *string `location:"uri" locationName:"vaultName" type:"string" required:"true"`
	// contains filtered or unexported fields
}

Provides options for deleting an archive from an Amazon Glacier vault.

func (DeleteArchiveInput) GoString 

func (s DeleteArchiveInput) GoString() string

GoString returns the string representation

func (DeleteArchiveInput) MarshalFields 

func (s DeleteArchiveInput) MarshalFields(e protocol.FieldEncoder) error

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (DeleteArchiveInput) String 

func (s DeleteArchiveInput) String() string

String returns the string representation

func (*DeleteArchiveInput) Validate 

func (s *DeleteArchiveInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DeleteArchiveOutput 

type DeleteArchiveOutput struct {
	// contains filtered or unexported fields
}

func (DeleteArchiveOutput) GoString 

func (s DeleteArchiveOutput) GoString() string

GoString returns the string representation

func (DeleteArchiveOutput) MarshalFields 

func (s DeleteArchiveOutput) MarshalFields(e protocol.FieldEncoder) error

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (DeleteArchiveOutput) SDKResponseMetadata 

func (s DeleteArchiveOutput) SDKResponseMetadata() aws.Response

SDKResponseMetdata return sthe response metadata for the API.

func (DeleteArchiveOutput) String 

func (s DeleteArchiveOutput) String() string

String returns the string representation

type DeleteArchiveRequest 

type DeleteArchiveRequest struct {
	*aws.Request
	Input *DeleteArchiveInput
	Copy  func(*DeleteArchiveInput) DeleteArchiveRequest
}

DeleteArchiveRequest is a API request type for the DeleteArchive API operation.

func (DeleteArchiveRequest) Send 

func (r DeleteArchiveRequest) Send() (*DeleteArchiveOutput, error)

Send marshals and sends the DeleteArchive API request.

type DeleteVaultAccessPolicyInput 

type DeleteVaultAccessPolicyInput struct {

	// The AccountId value is the AWS account ID of the account that owns the vault.
	// You can either specify an AWS account ID or optionally a single '-' (hyphen),
	// in which case Amazon Glacier uses the AWS account ID associated with the
	// credentials used to sign the request. If you use an account ID, do not include
	// any hyphens ('-') in the ID.
	//
	// AccountId is a required field
	AccountId *string `location:"uri" locationName:"accountId" type:"string" required:"true"`

	// The name of the vault.
	//
	// VaultName is a required field
	VaultName *string `location:"uri" locationName:"vaultName" type:"string" required:"true"`
	// contains filtered or unexported fields
}

DeleteVaultAccessPolicy input.

func (DeleteVaultAccessPolicyInput) GoString 

func (s DeleteVaultAccessPolicyInput) GoString() string

GoString returns the string representation

func (DeleteVaultAccessPolicyInput) MarshalFields 

func (s DeleteVaultAccessPolicyInput) MarshalFields(e protocol.FieldEncoder) error

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (DeleteVaultAccessPolicyInput) String 

func (s DeleteVaultAccessPolicyInput) String() string

String returns the string representation

func (*DeleteVaultAccessPolicyInput) Validate 

func (s *DeleteVaultAccessPolicyInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DeleteVaultAccessPolicyOutput 

type DeleteVaultAccessPolicyOutput struct {
	// contains filtered or unexported fields
}

func (DeleteVaultAccessPolicyOutput) GoString 

func (s DeleteVaultAccessPolicyOutput) GoString() string

GoString returns the string representation

func (DeleteVaultAccessPolicyOutput) MarshalFields 

func (s DeleteVaultAccessPolicyOutput) MarshalFields(e protocol.FieldEncoder) error

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (DeleteVaultAccessPolicyOutput) SDKResponseMetadata 

func (s DeleteVaultAccessPolicyOutput) SDKResponseMetadata() aws.Response

SDKResponseMetdata return sthe response metadata for the API.

func (DeleteVaultAccessPolicyOutput) String 

func (s DeleteVaultAccessPolicyOutput) String() string

String returns the string representation

type DeleteVaultAccessPolicyRequest 

type DeleteVaultAccessPolicyRequest struct {
	*aws.Request
	Input *DeleteVaultAccessPolicyInput
	Copy  func(*DeleteVaultAccessPolicyInput) DeleteVaultAccessPolicyRequest
}

DeleteVaultAccessPolicyRequest is a API request type for the DeleteVaultAccessPolicy API operation.

func (DeleteVaultAccessPolicyRequest) Send 

func (r DeleteVaultAccessPolicyRequest) Send() (*DeleteVaultAccessPolicyOutput, error)

Send marshals and sends the DeleteVaultAccessPolicy API request.

type DeleteVaultInput 

type DeleteVaultInput struct {

	// The AccountId value is the AWS account ID of the account that owns the vault.
	// You can either specify an AWS account ID or optionally a single '-' (hyphen),
	// in which case Amazon Glacier uses the AWS account ID associated with the
	// credentials used to sign the request. If you use an account ID, do not include
	// any hyphens ('-') in the ID.
	//
	// AccountId is a required field
	AccountId *string `location:"uri" locationName:"accountId" type:"string" required:"true"`

	// The name of the vault.
	//
	// VaultName is a required field
	VaultName *string `location:"uri" locationName:"vaultName" type:"string" required:"true"`
	// contains filtered or unexported fields
}

Provides options for deleting a vault from Amazon Glacier.

func (DeleteVaultInput) GoString 

func (s DeleteVaultInput) GoString() string

GoString returns the string representation

func (DeleteVaultInput) MarshalFields 

func (s DeleteVaultInput) MarshalFields(e protocol.FieldEncoder) error

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (DeleteVaultInput) String 

func (s DeleteVaultInput) String() string

String returns the string representation

func (*DeleteVaultInput) Validate 

func (s *DeleteVaultInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DeleteVaultNotificationsInput 

type DeleteVaultNotificationsInput struct {

	// The AccountId value is the AWS account ID of the account that owns the vault.
	// You can either specify an AWS account ID or optionally a single '-' (hyphen),
	// in which case Amazon Glacier uses the AWS account ID associated with the
	// credentials used to sign the request. If you use an account ID, do not include
	// any hyphens ('-') in the ID.
	//
	// AccountId is a required field
	AccountId *string `location:"uri" locationName:"accountId" type:"string" required:"true"`

	// The name of the vault.
	//
	// VaultName is a required field
	VaultName *string `location:"uri" locationName:"vaultName" type:"string" required:"true"`
	// contains filtered or unexported fields
}

Provides options for deleting a vault notification configuration from an Amazon Glacier vault.

func (DeleteVaultNotificationsInput) GoString 

func (s DeleteVaultNotificationsInput) GoString() string

GoString returns the string representation

func (DeleteVaultNotificationsInput) MarshalFields 

func (s DeleteVaultNotificationsInput) MarshalFields(e protocol.FieldEncoder) error

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (DeleteVaultNotificationsInput) String 

func (s DeleteVaultNotificationsInput) String() string

String returns the string representation

func (*DeleteVaultNotificationsInput) Validate 

func (s *DeleteVaultNotificationsInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DeleteVaultNotificationsOutput 

type DeleteVaultNotificationsOutput struct {
	// contains filtered or unexported fields
}

func (DeleteVaultNotificationsOutput) GoString 

func (s DeleteVaultNotificationsOutput) GoString() string

GoString returns the string representation

func (DeleteVaultNotificationsOutput) MarshalFields 

func (s DeleteVaultNotificationsOutput) MarshalFields(e protocol.FieldEncoder) error

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (DeleteVaultNotificationsOutput) SDKResponseMetadata 

func (s DeleteVaultNotificationsOutput) SDKResponseMetadata() aws.Response

SDKResponseMetdata return sthe response metadata for the API.

func (DeleteVaultNotificationsOutput) String 

func (s DeleteVaultNotificationsOutput) String() string

String returns the string representation

type DeleteVaultNotificationsRequest 

type DeleteVaultNotificationsRequest struct {
	*aws.Request
	Input *DeleteVaultNotificationsInput
	Copy  func(*DeleteVaultNotificationsInput) DeleteVaultNotificationsRequest
}

DeleteVaultNotificationsRequest is a API request type for the DeleteVaultNotifications API operation.

func (DeleteVaultNotificationsRequest) Send 

func (r DeleteVaultNotificationsRequest) Send() (*DeleteVaultNotificationsOutput, error)

Send marshals and sends the DeleteVaultNotifications API request.

type DeleteVaultOutput 

type DeleteVaultOutput struct {
	// contains filtered or unexported fields
}

func (DeleteVaultOutput) GoString 

func (s DeleteVaultOutput) GoString() string

GoString returns the string representation

func (DeleteVaultOutput) MarshalFields 

func (s DeleteVaultOutput) MarshalFields(e protocol.FieldEncoder) error

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (DeleteVaultOutput) SDKResponseMetadata 

func (s DeleteVaultOutput) SDKResponseMetadata() aws.Response

SDKResponseMetdata return sthe response metadata for the API.

func (DeleteVaultOutput) String 

func (s DeleteVaultOutput) String() string

String returns the string representation

type DeleteVaultRequest 

type DeleteVaultRequest struct {
	*aws.Request
	Input *DeleteVaultInput
	Copy  func(*DeleteVaultInput) DeleteVaultRequest
}

DeleteVaultRequest is a API request type for the DeleteVault API operation.

func (DeleteVaultRequest) Send 

func (r DeleteVaultRequest) Send() (*DeleteVaultOutput, error)

Send marshals and sends the DeleteVault API request.

type DescribeJobInput 

type DescribeJobInput struct {

	// The AccountId value is the AWS account ID of the account that owns the vault.
	// You can either specify an AWS account ID or optionally a single '-' (hyphen),
	// in which case Amazon Glacier uses the AWS account ID associated with the
	// credentials used to sign the request. If you use an account ID, do not include
	// any hyphens ('-') in the ID.
	//
	// AccountId is a required field
	AccountId *string `location:"uri" locationName:"accountId" type:"string" required:"true"`

	// The ID of the job to describe.
	//
	// JobId is a required field
	JobId *string `location:"uri" locationName:"jobId" type:"string" required:"true"`

	// The name of the vault.
	//
	// VaultName is a required field
	VaultName *string `location:"uri" locationName:"vaultName" type:"string" required:"true"`
	// contains filtered or unexported fields
}

Provides options for retrieving a job description.

func (DescribeJobInput) GoString 

func (s DescribeJobInput) GoString() string

GoString returns the string representation

func (DescribeJobInput) MarshalFields 

func (s DescribeJobInput) MarshalFields(e protocol.FieldEncoder) error

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (DescribeJobInput) String 

func (s DescribeJobInput) String() string

String returns the string representation

func (*DescribeJobInput) Validate 

func (s *DescribeJobInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DescribeJobOutput 

type DescribeJobOutput struct {

	// The job type. This value is either ArchiveRetrieval, InventoryRetrieval,
	// or Select.
	Action ActionCode `type:"string" enum:"true"`

	// The archive ID requested for a select job or archive retrieval. Otherwise,
	// this field is null.
	ArchiveId *string `type:"string"`

	// The SHA256 tree hash of the entire archive for an archive retrieval. For
	// inventory retrieval or select jobs, this field is null.
	ArchiveSHA256TreeHash *string `type:"string"`

	// For an archive retrieval job, this value is the size in bytes of the archive
	// being requested for download. For an inventory retrieval or select job, this
	// value is null.
	ArchiveSizeInBytes *int64 `type:"long"`

	// The job status. When a job is completed, you get the job's output using Get
	// Job Output (GET output).
	Completed *bool `type:"boolean"`

	// The UTC time that the job request completed. While the job is in progress,
	// the value is null.
	CompletionDate *string `type:"string"`

	// The UTC date when the job was created. This value is a string representation
	// of ISO 8601 date format, for example "2012-03-20T17:03:43.221Z".
	CreationDate *string `type:"string"`

	// Parameters used for range inventory retrieval.
	InventoryRetrievalParameters *InventoryRetrievalJobDescription `type:"structure"`

	// For an inventory retrieval job, this value is the size in bytes of the inventory
	// requested for download. For an archive retrieval or select job, this value
	// is null.
	InventorySizeInBytes *int64 `type:"long"`

	// The job description provided when initiating the job.
	JobDescription *string `type:"string"`

	// An opaque string that identifies an Amazon Glacier job.
	JobId *string `type:"string"`

	// Contains the job output location.
	JobOutputPath *string `type:"string"`

	// Contains the location where the data from the select job is stored.
	OutputLocation *OutputLocation `type:"structure"`

	// The retrieved byte range for archive retrieval jobs in the form StartByteValue-EndByteValue.
	// If no range was specified in the archive retrieval, then the whole archive
	// is retrieved. In this case, StartByteValue equals 0 and EndByteValue equals
	// the size of the archive minus 1. For inventory retrieval or select jobs,
	// this field is null.
	RetrievalByteRange *string `type:"string"`

	// For an archive retrieval job, this value is the checksum of the archive.
	// Otherwise, this value is null.
	//
	// The SHA256 tree hash value for the requested range of an archive. If the
	// InitiateJob request for an archive specified a tree-hash aligned range, then
	// this field returns a value.
	//
	// If the whole archive is retrieved, this value is the same as the ArchiveSHA256TreeHash
	// value.
	//
	// This field is null for the following:
	//
	//    * Archive retrieval jobs that specify a range that is not tree-hash aligned
	//
	//    * Archival jobs that specify a range that is equal to the whole archive,
	//    when the job status is InProgress
	//
	//    * Inventory jobs
	//
	//    * Select jobs
	SHA256TreeHash *string `type:"string"`

	// An Amazon SNS topic that receives notification.
	SNSTopic *string `type:"string"`

	// Contains the parameters used for a select.
	SelectParameters *SelectParameters `type:"structure"`

	// The status code can be InProgress, Succeeded, or Failed, and indicates the
	// status of the job.
	StatusCode StatusCode `type:"string" enum:"true"`

	// A friendly message that describes the job status.
	StatusMessage *string `type:"string"`

	// The tier to use for a select or an archive retrieval. Valid values are Expedited,
	// Standard, or Bulk. Standard is the default.
	Tier *string `type:"string"`

	// The Amazon Resource Name (ARN) of the vault from which an archive retrieval
	// was requested.
	VaultARN *string `type:"string"`
	// contains filtered or unexported fields
}

Contains the description of an Amazon Glacier job.

func (DescribeJobOutput) GoString 

func (s DescribeJobOutput) GoString() string

GoString returns the string representation

func (DescribeJobOutput) MarshalFields 

func (s DescribeJobOutput) MarshalFields(e protocol.FieldEncoder) error

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (DescribeJobOutput) SDKResponseMetadata 

func (s DescribeJobOutput) SDKResponseMetadata() aws.Response

SDKResponseMetdata return sthe response metadata for the API.

func (DescribeJobOutput) String 

func (s DescribeJobOutput) String() string

String returns the string representation

type DescribeJobRequest 

type DescribeJobRequest struct {
	*aws.Request
	Input *DescribeJobInput
	Copy  func(*DescribeJobInput) DescribeJobRequest
}

DescribeJobRequest is a API request type for the DescribeJob API operation.

func (DescribeJobRequest) Send 

func (r DescribeJobRequest) Send() (*DescribeJobOutput, error)

Send marshals and sends the DescribeJob API request.

type DescribeVaultInput 

type DescribeVaultInput struct {

	// The AccountId value is the AWS account ID of the account that owns the vault.
	// You can either specify an AWS account ID or optionally a single '-' (hyphen),
	// in which case Amazon Glacier uses the AWS account ID associated with the
	// credentials used to sign the request. If you use an account ID, do not include
	// any hyphens ('-') in the ID.
	//
	// AccountId is a required field
	AccountId *string `location:"uri" locationName:"accountId" type:"string" required:"true"`

	// The name of the vault.
	//
	// VaultName is a required field
	VaultName *string `location:"uri" locationName:"vaultName" type:"string" required:"true"`
	// contains filtered or unexported fields
}

Provides options for retrieving metadata for a specific vault in Amazon Glacier.

func (DescribeVaultInput) GoString 

func (s DescribeVaultInput) GoString() string

GoString returns the string representation

func (DescribeVaultInput) MarshalFields 

func (s DescribeVaultInput) MarshalFields(e protocol.FieldEncoder) error

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (DescribeVaultInput) String 

func (s DescribeVaultInput) String() string

String returns the string representation

func (*DescribeVaultInput) Validate 

func (s *DescribeVaultInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DescribeVaultOutput 

type DescribeVaultOutput struct {

	// The Universal Coordinated Time (UTC) date when the vault was created. This
	// value should be a string in the ISO 8601 date format, for example 2012-03-20T17:03:43.221Z.
	CreationDate *string `type:"string"`

	// The Universal Coordinated Time (UTC) date when Amazon Glacier completed the
	// last vault inventory. This value should be a string in the ISO 8601 date
	// format, for example 2012-03-20T17:03:43.221Z.
	LastInventoryDate *string `type:"string"`

	// The number of archives in the vault as of the last inventory date. This field
	// will return null if an inventory has not yet run on the vault, for example
	// if you just created the vault.
	NumberOfArchives *int64 `type:"long"`

	// Total size, in bytes, of the archives in the vault as of the last inventory
	// date. This field will return null if an inventory has not yet run on the
	// vault, for example if you just created the vault.
	SizeInBytes *int64 `type:"long"`

	// The Amazon Resource Name (ARN) of the vault.
	VaultARN *string `type:"string"`

	// The name of the vault.
	VaultName *string `type:"string"`
	// contains filtered or unexported fields
}

Contains the Amazon Glacier response to your request.

func (DescribeVaultOutput) GoString 

func (s DescribeVaultOutput) GoString() string

GoString returns the string representation

func (DescribeVaultOutput) MarshalFields 

func (s DescribeVaultOutput) MarshalFields(e protocol.FieldEncoder) error

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (DescribeVaultOutput) SDKResponseMetadata 

func (s DescribeVaultOutput) SDKResponseMetadata() aws.Response

SDKResponseMetdata return sthe response metadata for the API.

func (DescribeVaultOutput) String 

func (s DescribeVaultOutput) String() string

String returns the string representation

type DescribeVaultRequest 

type DescribeVaultRequest struct {
	*aws.Request
	Input *DescribeVaultInput
	Copy  func(*DescribeVaultInput) DescribeVaultRequest
}

DescribeVaultRequest is a API request type for the DescribeVault API operation.

func (DescribeVaultRequest) Send 

func (r DescribeVaultRequest) Send() (*DescribeVaultOutput, error)

Send marshals and sends the DescribeVault API request.

type Encryption 

type Encryption struct {

	// The server-side encryption algorithm used when storing job results in Amazon
	// S3, for example AES256 or aws:kms.
	EncryptionType EncryptionType `type:"string" enum:"true"`

	// Optional. If the encryption type is aws:kms, you can use this value to specify
	// the encryption context for the job results.
	KMSContext *string `type:"string"`

	// The AWS KMS key ID to use for object encryption. All GET and PUT requests
	// for an object protected by AWS KMS fail if not made by using Secure Sockets
	// Layer (SSL) or Signature Version 4.
	KMSKeyId *string `type:"string"`
	// contains filtered or unexported fields
}

Contains information about the encryption used to store the job results in Amazon S3.

func (Encryption) GoString 

func (s Encryption) GoString() string

GoString returns the string representation

func (Encryption) MarshalFields 

func (s Encryption) MarshalFields(e protocol.FieldEncoder) error

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (Encryption) String 

func (s Encryption) String() string

String returns the string representation

type EncryptionType 

type EncryptionType string
const (
	EncryptionTypeAwsKms EncryptionType = "aws:kms"
	EncryptionTypeAes256 EncryptionType = "AES256"
)

Enum values for EncryptionType

func (EncryptionType) MarshalValue 

func (enum EncryptionType) MarshalValue() (string, error)

func (EncryptionType) MarshalValueBuf 

func (enum EncryptionType) MarshalValueBuf(b []byte) ([]byte, error)

type ExpressionType 

type ExpressionType string
const (
	ExpressionTypeSql ExpressionType = "SQL"
)

Enum values for ExpressionType

func (ExpressionType) MarshalValue 

func (enum ExpressionType) MarshalValue() (string, error)

func (ExpressionType) MarshalValueBuf 

func (enum ExpressionType) MarshalValueBuf(b []byte) ([]byte, error)

type FileHeaderInfo 

type FileHeaderInfo string
const (
	FileHeaderInfoUse    FileHeaderInfo = "USE"
	FileHeaderInfoIgnore FileHeaderInfo = "IGNORE"
	FileHeaderInfoNone   FileHeaderInfo = "NONE"
)

Enum values for FileHeaderInfo

func (FileHeaderInfo) MarshalValue 

func (enum FileHeaderInfo) MarshalValue() (string, error)

func (FileHeaderInfo) MarshalValueBuf 

func (enum FileHeaderInfo) MarshalValueBuf(b []byte) ([]byte, error)

type GetDataRetrievalPolicyInput 

type GetDataRetrievalPolicyInput struct {

	// The AccountId value is the AWS account ID. This value must match the AWS
	// account ID associated with the credentials used to sign the request. You
	// can either specify an AWS account ID or optionally a single '-' (hyphen),
	// in which case Amazon Glacier uses the AWS account ID associated with the
	// credentials used to sign the request. If you specify your account ID, do
	// not include any hyphens ('-') in the ID.
	//
	// AccountId is a required field
	AccountId *string `location:"uri" locationName:"accountId" type:"string" required:"true"`
	// contains filtered or unexported fields
}

Input for GetDataRetrievalPolicy.

func (GetDataRetrievalPolicyInput) GoString 

func (s GetDataRetrievalPolicyInput) GoString() string

GoString returns the string representation

func (GetDataRetrievalPolicyInput) MarshalFields 

func (s GetDataRetrievalPolicyInput) MarshalFields(e protocol.FieldEncoder) error

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (GetDataRetrievalPolicyInput) String 

func (s GetDataRetrievalPolicyInput) String() string

String returns the string representation

func (*GetDataRetrievalPolicyInput) Validate 

func (s *GetDataRetrievalPolicyInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type GetDataRetrievalPolicyOutput 

type GetDataRetrievalPolicyOutput struct {

	// Contains the returned data retrieval policy in JSON format.
	Policy *DataRetrievalPolicy `type:"structure"`
	// contains filtered or unexported fields
}

Contains the Amazon Glacier response to the GetDataRetrievalPolicy request.

func (GetDataRetrievalPolicyOutput) GoString 

func (s GetDataRetrievalPolicyOutput) GoString() string

GoString returns the string representation

func (GetDataRetrievalPolicyOutput) MarshalFields 

func (s GetDataRetrievalPolicyOutput) MarshalFields(e protocol.FieldEncoder) error

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (GetDataRetrievalPolicyOutput) SDKResponseMetadata 

func (s GetDataRetrievalPolicyOutput) SDKResponseMetadata() aws.Response

SDKResponseMetdata return sthe response metadata for the API.

func (GetDataRetrievalPolicyOutput) String 

func (s GetDataRetrievalPolicyOutput) String() string

String returns the string representation

type GetDataRetrievalPolicyRequest 

type GetDataRetrievalPolicyRequest struct {
	*aws.Request
	Input *GetDataRetrievalPolicyInput
	Copy  func(*GetDataRetrievalPolicyInput) GetDataRetrievalPolicyRequest
}

GetDataRetrievalPolicyRequest is a API request type for the GetDataRetrievalPolicy API operation.

func (GetDataRetrievalPolicyRequest) Send 

func (r GetDataRetrievalPolicyRequest) Send() (*GetDataRetrievalPolicyOutput, error)

Send marshals and sends the GetDataRetrievalPolicy API request.

type GetJobOutputInput 

type GetJobOutputInput struct {

	// The AccountId value is the AWS account ID of the account that owns the vault.
	// You can either specify an AWS account ID or optionally a single '-' (hyphen),
	// in which case Amazon Glacier uses the AWS account ID associated with the
	// credentials used to sign the request. If you use an account ID, do not include
	// any hyphens ('-') in the ID.
	//
	// AccountId is a required field
	AccountId *string `location:"uri" locationName:"accountId" type:"string" required:"true"`

	// The job ID whose data is downloaded.
	//
	// JobId is a required field
	JobId *string `location:"uri" locationName:"jobId" type:"string" required:"true"`

	// The range of bytes to retrieve from the output. For example, if you want
	// to download the first 1,048,576 bytes, specify the range as bytes=0-1048575.
	// By default, this operation downloads the entire output.
	//
	// If the job output is large, then you can use a range to retrieve a portion
	// of the output. This allows you to download the entire output in smaller chunks
	// of bytes. For example, suppose you have 1 GB of job output you want to download
	// and you decide to download 128 MB chunks of data at a time, which is a total
	// of eight Get Job Output requests. You use the following process to download
	// the job output:
	//
	// Download a 128 MB chunk of output by specifying the appropriate byte range.
	// Verify that all 128 MB of data was received.
	//
	// Along with the data, the response includes a SHA256 tree hash of the payload.
	// You compute the checksum of the payload on the client and compare it with
	// the checksum you received in the response to ensure you received all the
	// expected data.
	//
	// Repeat steps 1 and 2 for all the eight 128 MB chunks of output data, each
	// time specifying the appropriate byte range.
	//
	// After downloading all the parts of the job output, you have a list of eight
	// checksum values. Compute the tree hash of these values to find the checksum
	// of the entire output. Using the DescribeJob API, obtain job information of
	// the job that provided you the output. The response includes the checksum
	// of the entire archive stored in Amazon Glacier. You compare this value with
	// the checksum you computed to ensure you have downloaded the entire archive
	// content with no errors.
	Range *string `location:"header" locationName:"Range" type:"string"`

	// The name of the vault.
	//
	// VaultName is a required field
	VaultName *string `location:"uri" locationName:"vaultName" type:"string" required:"true"`
	// contains filtered or unexported fields
}

Provides options for downloading output of an Amazon Glacier job.

func (GetJobOutputInput) GoString 

func (s GetJobOutputInput) GoString() string

GoString returns the string representation

func (GetJobOutputInput) MarshalFields 

func (s GetJobOutputInput) MarshalFields(e protocol.FieldEncoder) error

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (GetJobOutputInput) String 

func (s GetJobOutputInput) String() string

String returns the string representation

func (*GetJobOutputInput) Validate 

func (s *GetJobOutputInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type GetJobOutputOutput 

type GetJobOutputOutput struct {

	// Indicates the range units accepted. For more information, see RFC2616 (http://www.w3.org/Protocols/rfc2616/rfc2616-sec14.html).
	AcceptRanges *string `location:"header" locationName:"Accept-Ranges" type:"string"`

	// The description of an archive.
	ArchiveDescription *string `location:"header" locationName:"x-amz-archive-description" type:"string"`

	// The job data, either archive data or inventory data.
	Body io.ReadCloser `locationName:"body" type:"blob"`

	// The checksum of the data in the response. This header is returned only when
	// retrieving the output for an archive retrieval job. Furthermore, this header
	// appears only under the following conditions:
	//
	//    * You get the entire range of the archive.
	//
	//    * You request a range to return of the archive that starts and ends on
	//    a multiple of 1 MB. For example, if you have an 3.1 MB archive and you
	//    specify a range to return that starts at 1 MB and ends at 2 MB, then the
	//    x-amz-sha256-tree-hash is returned as a response header.
	//
	//    * You request a range of the archive to return that starts on a multiple
	//    of 1 MB and goes to the end of the archive. For example, if you have a
	//    3.1 MB archive and you specify a range that starts at 2 MB and ends at
	//    3.1 MB (the end of the archive), then the x-amz-sha256-tree-hash is returned
	//    as a response header.
	Checksum *string `location:"header" locationName:"x-amz-sha256-tree-hash" type:"string"`

	// The range of bytes returned by Amazon Glacier. If only partial output is
	// downloaded, the response provides the range of bytes Amazon Glacier returned.
	// For example, bytes 0-1048575/8388608 returns the first 1 MB from 8 MB.
	ContentRange *string `location:"header" locationName:"Content-Range" type:"string"`

	// The Content-Type depends on whether the job output is an archive or a vault
	// inventory. For archive data, the Content-Type is application/octet-stream.
	// For vault inventory, if you requested CSV format when you initiated the job,
	// the Content-Type is text/csv. Otherwise, by default, vault inventory is returned
	// as JSON, and the Content-Type is application/json.
	ContentType *string `location:"header" locationName:"Content-Type" type:"string"`

	// The HTTP response code for a job output request. The value depends on whether
	// a range was specified in the request.
	Status *int64 `location:"statusCode" locationName:"status" type:"integer"`
	// contains filtered or unexported fields
}

Contains the Amazon Glacier response to your request.

func (GetJobOutputOutput) GoString 

func (s GetJobOutputOutput) GoString() string

GoString returns the string representation

func (GetJobOutputOutput) MarshalFields 

func (s GetJobOutputOutput) MarshalFields(e protocol.FieldEncoder) error

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (GetJobOutputOutput) SDKResponseMetadata 

func (s GetJobOutputOutput) SDKResponseMetadata() aws.Response

SDKResponseMetdata return sthe response metadata for the API.

func (GetJobOutputOutput) String 

func (s GetJobOutputOutput) String() string

String returns the string representation

type GetJobOutputRequest 

type GetJobOutputRequest struct {
	*aws.Request
	Input *GetJobOutputInput
	Copy  func(*GetJobOutputInput) GetJobOutputRequest
}

GetJobOutputRequest is a API request type for the GetJobOutput API operation.

func (GetJobOutputRequest) Send 

func (r GetJobOutputRequest) Send() (*GetJobOutputOutput, error)

Send marshals and sends the GetJobOutput API request.

type GetVaultAccessPolicyInput 

type GetVaultAccessPolicyInput struct {

	// The AccountId value is the AWS account ID of the account that owns the vault.
	// You can either specify an AWS account ID or optionally a single '-' (hyphen),
	// in which case Amazon Glacier uses the AWS account ID associated with the
	// credentials used to sign the request. If you use an account ID, do not include
	// any hyphens ('-') in the ID.
	//
	// AccountId is a required field
	AccountId *string `location:"uri" locationName:"accountId" type:"string" required:"true"`

	// The name of the vault.
	//
	// VaultName is a required field
	VaultName *string `location:"uri" locationName:"vaultName" type:"string" required:"true"`
	// contains filtered or unexported fields
}

Input for GetVaultAccessPolicy.

func (GetVaultAccessPolicyInput) GoString 

func (s GetVaultAccessPolicyInput) GoString() string

GoString returns the string representation

func (GetVaultAccessPolicyInput) MarshalFields 

func (s GetVaultAccessPolicyInput) MarshalFields(e protocol.FieldEncoder) error

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (GetVaultAccessPolicyInput) String 

func (s GetVaultAccessPolicyInput) String() string

String returns the string representation

func (*GetVaultAccessPolicyInput) Validate 

func (s *GetVaultAccessPolicyInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type GetVaultAccessPolicyOutput 

type GetVaultAccessPolicyOutput struct {

	// Contains the returned vault access policy as a JSON string.
	Policy *VaultAccessPolicy `locationName:"policy" type:"structure"`
	// contains filtered or unexported fields
}

Output for GetVaultAccessPolicy.

func (GetVaultAccessPolicyOutput) GoString 

func (s GetVaultAccessPolicyOutput) GoString() string

GoString returns the string representation

func (GetVaultAccessPolicyOutput) MarshalFields 

func (s GetVaultAccessPolicyOutput) MarshalFields(e protocol.FieldEncoder) error

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (GetVaultAccessPolicyOutput) SDKResponseMetadata 

func (s GetVaultAccessPolicyOutput) SDKResponseMetadata() aws.Response

SDKResponseMetdata return sthe response metadata for the API.

func (GetVaultAccessPolicyOutput) String 

func (s GetVaultAccessPolicyOutput) String() string

String returns the string representation

type GetVaultAccessPolicyRequest 

type GetVaultAccessPolicyRequest struct {
	*aws.Request
	Input *GetVaultAccessPolicyInput
	Copy  func(*GetVaultAccessPolicyInput) GetVaultAccessPolicyRequest
}

GetVaultAccessPolicyRequest is a API request type for the GetVaultAccessPolicy API operation.

func (GetVaultAccessPolicyRequest) Send 

func (r GetVaultAccessPolicyRequest) Send() (*GetVaultAccessPolicyOutput, error)

Send marshals and sends the GetVaultAccessPolicy API request.

type GetVaultLockInput 

type GetVaultLockInput struct {

	// The AccountId value is the AWS account ID of the account that owns the vault.
	// You can either specify an AWS account ID or optionally a single '-' (hyphen),
	// in which case Amazon Glacier uses the AWS account ID associated with the
	// credentials used to sign the request. If you use an account ID, do not include
	// any hyphens ('-') in the ID.
	//
	// AccountId is a required field
	AccountId *string `location:"uri" locationName:"accountId" type:"string" required:"true"`

	// The name of the vault.
	//
	// VaultName is a required field
	VaultName *string `location:"uri" locationName:"vaultName" type:"string" required:"true"`
	// contains filtered or unexported fields
}

The input values for GetVaultLock.

func (GetVaultLockInput) GoString 

func (s GetVaultLockInput) GoString() string

GoString returns the string representation

func (GetVaultLockInput) MarshalFields 

func (s GetVaultLockInput) MarshalFields(e protocol.FieldEncoder) error

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (GetVaultLockInput) String 

func (s GetVaultLockInput) String() string

String returns the string representation

func (*GetVaultLockInput) Validate 

func (s *GetVaultLockInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type GetVaultLockOutput 

type GetVaultLockOutput struct {

	// The UTC date and time at which the vault lock was put into the InProgress
	// state.
	CreationDate *string `type:"string"`

	// The UTC date and time at which the lock ID expires. This value can be null
	// if the vault lock is in a Locked state.
	ExpirationDate *string `type:"string"`

	// The vault lock policy as a JSON string, which uses "\" as an escape character.
	Policy *string `type:"string"`

	// The state of the vault lock. InProgress or Locked.
	State *string `type:"string"`
	// contains filtered or unexported fields
}

Contains the Amazon Glacier response to your request.

func (GetVaultLockOutput) GoString 

func (s GetVaultLockOutput) GoString() string

GoString returns the string representation

func (GetVaultLockOutput) MarshalFields 

func (s GetVaultLockOutput) MarshalFields(e protocol.FieldEncoder) error

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (GetVaultLockOutput) SDKResponseMetadata 

func (s GetVaultLockOutput) SDKResponseMetadata() aws.Response

SDKResponseMetdata return sthe response metadata for the API.

func (GetVaultLockOutput) String 

func (s GetVaultLockOutput) String() string

String returns the string representation

type GetVaultLockRequest 

type GetVaultLockRequest struct {
	*aws.Request
	Input *GetVaultLockInput
	Copy  func(*GetVaultLockInput) GetVaultLockRequest
}

GetVaultLockRequest is a API request type for the GetVaultLock API operation.

func (GetVaultLockRequest) Send 

func (r GetVaultLockRequest) Send() (*GetVaultLockOutput, error)

Send marshals and sends the GetVaultLock API request.

type GetVaultNotificationsInput 

type GetVaultNotificationsInput struct {

	// The AccountId value is the AWS account ID of the account that owns the vault.
	// You can either specify an AWS account ID or optionally a single '-' (hyphen),
	// in which case Amazon Glacier uses the AWS account ID associated with the
	// credentials used to sign the request. If you use an account ID, do not include
	// any hyphens ('-') in the ID.
	//
	// AccountId is a required field
	AccountId *string `location:"uri" locationName:"accountId" type:"string" required:"true"`

	// The name of the vault.
	//
	// VaultName is a required field
	VaultName *string `location:"uri" locationName:"vaultName" type:"string" required:"true"`
	// contains filtered or unexported fields
}

Provides options for retrieving the notification configuration set on an Amazon Glacier vault.

func (GetVaultNotificationsInput) GoString 

func (s GetVaultNotificationsInput) GoString() string

GoString returns the string representation

func (GetVaultNotificationsInput) MarshalFields 

func (s GetVaultNotificationsInput) MarshalFields(e protocol.FieldEncoder) error

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (GetVaultNotificationsInput) String 

func (s GetVaultNotificationsInput) String() string

String returns the string representation

func (*GetVaultNotificationsInput) Validate 

func (s *GetVaultNotificationsInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type GetVaultNotificationsOutput 

type GetVaultNotificationsOutput struct {

	// Returns the notification configuration set on the vault.
	VaultNotificationConfig *VaultNotificationConfig `locationName:"vaultNotificationConfig" type:"structure"`
	// contains filtered or unexported fields
}

Contains the Amazon Glacier response to your request.

func (GetVaultNotificationsOutput) GoString 

func (s GetVaultNotificationsOutput) GoString() string

GoString returns the string representation

func (GetVaultNotificationsOutput) MarshalFields 

func (s GetVaultNotificationsOutput) MarshalFields(e protocol.FieldEncoder) error

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (GetVaultNotificationsOutput) SDKResponseMetadata 

func (s GetVaultNotificationsOutput) SDKResponseMetadata() aws.Response

SDKResponseMetdata return sthe response metadata for the API.

func (GetVaultNotificationsOutput) String 

func (s GetVaultNotificationsOutput) String() string

String returns the string representation

type GetVaultNotificationsRequest 

type GetVaultNotificationsRequest struct {
	*aws.Request
	Input *GetVaultNotificationsInput
	Copy  func(*GetVaultNotificationsInput) GetVaultNotificationsRequest
}

GetVaultNotificationsRequest is a API request type for the GetVaultNotifications API operation.

func (GetVaultNotificationsRequest) Send 

func (r GetVaultNotificationsRequest) Send() (*GetVaultNotificationsOutput, error)

Send marshals and sends the GetVaultNotifications API request.

type Glacier 

type Glacier struct {
	*aws.Client
}

Glacier provides the API operation methods for making requests to Amazon Glacier. See this package's package overview docs for details on the service.

Glacier methods are safe to use concurrently. It is not safe to modify mutate any of the struct's properties though.

func New 

func New(config aws.Config) *Glacier

New creates a new instance of the Glacier client with a config.

Example: 

// Create a Glacier client from just a config.
svc := glacier.New(myConfig)

func (*Glacier) AbortMultipartUploadRequest 

func (c *Glacier) AbortMultipartUploadRequest(input *AbortMultipartUploadInput) AbortMultipartUploadRequest

AbortMultipartUploadRequest returns a request value for making API operation for Amazon Glacier.

This operation aborts a multipart upload identified by the upload ID.

After the Abort Multipart Upload request succeeds, you cannot upload any more parts to the multipart upload or complete the multipart upload. Aborting a completed upload fails. However, aborting an already-aborted upload will succeed, for a short time. For more information about uploading a part and completing a multipart upload, see UploadMultipartPart and CompleteMultipartUpload.

This operation is idempotent.

An AWS account has full permission to perform all operations (actions). However, AWS Identity and Access Management (IAM) users don't have any permissions by default. You must grant them explicit permission to perform specific actions. For more information, see Access Control Using AWS Identity and Access Management (IAM) (http://docs.aws.amazon.com/amazonglacier/latest/dev/using-iam-with-amazon-glacier.html).

For conceptual information and underlying REST API, see Working with Archives in Amazon Glacier (http://docs.aws.amazon.com/amazonglacier/latest/dev/working-with-archives.html) and Abort Multipart Upload (http://docs.aws.amazon.com/amazonglacier/latest/dev/api-multipart-abort-upload.html) in the Amazon Glacier Developer Guide. 

// Example sending a request using the AbortMultipartUploadRequest method.
req := client.AbortMultipartUploadRequest(params)
resp, err := req.Send()
if err == nil {
    fmt.Println(resp)
}
Example (Shared00)

To abort a multipart upload identified by the upload ID

The example deletes an in-progress multipart upload to a vault named my-vault: 

package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go-v2/aws"
	"github.com/aws/aws-sdk-go-v2/aws/awserr"
	"github.com/aws/aws-sdk-go-v2/aws/external"
	"github.com/aws/aws-sdk-go-v2/service/glacier"
)

func main() {
	cfg, err := external.LoadDefaultAWSConfig()
	if err != nil {
		panic("failed to load config, " + err.Error())
	}

	svc := glacier.New(cfg)
	input := &glacier.AbortMultipartUploadInput{
		AccountId: aws.String("-"),
		UploadId:  aws.String("19gaRezEXAMPLES6Ry5YYdqthHOC_kGRCT03L9yetr220UmPtBYKk-OssZtLqyFu7sY1_lR7vgFuJV6NtcV5zpsJ"),
		VaultName: aws.String("my-vault"),
	}

	req := svc.AbortMultipartUploadRequest(input)
	result, err := req.Send()
	if err != nil {
		if aerr, ok := err.(awserr.Error); ok {
			switch aerr.Code() {
			case glacier.ErrCodeResourceNotFoundException:
				fmt.Println(glacier.ErrCodeResourceNotFoundException, aerr.Error())
			case glacier.ErrCodeInvalidParameterValueException:
				fmt.Println(glacier.ErrCodeInvalidParameterValueException, aerr.Error())
			case glacier.ErrCodeMissingParameterValueException:
				fmt.Println(glacier.ErrCodeMissingParameterValueException, aerr.Error())
			case glacier.ErrCodeServiceUnavailableException:
				fmt.Println(glacier.ErrCodeServiceUnavailableException, aerr.Error())
			default:
				fmt.Println(aerr.Error())
			}
		} else {
			// Print the error, cast err to awserr.Error to get the Code and
			// Message from an error.
			fmt.Println(err.Error())
		}
		return
	}

	fmt.Println(result)
}

Output:

func (*Glacier) AbortVaultLockRequest 

func (c *Glacier) AbortVaultLockRequest(input *AbortVaultLockInput) AbortVaultLockRequest

AbortVaultLockRequest returns a request value for making API operation for Amazon Glacier.

This operation aborts the vault locking process if the vault lock is not in the Locked state. If the vault lock is in the Locked state when this operation is requested, the operation returns an AccessDeniedException error. Aborting the vault locking process removes the vault lock policy from the specified vault.

A vault lock is put into the InProgress state by calling InitiateVaultLock. A vault lock is put into the Locked state by calling CompleteVaultLock. You can get the state of a vault lock by calling GetVaultLock. For more information about the vault locking process, see Amazon Glacier Vault Lock (http://docs.aws.amazon.com/amazonglacier/latest/dev/vault-lock.html). For more information about vault lock policies, see Amazon Glacier Access Control with Vault Lock Policies (http://docs.aws.amazon.com/amazonglacier/latest/dev/vault-lock-policy.html).

This operation is idempotent. You can successfully invoke this operation multiple times, if the vault lock is in the InProgress state or if there is no policy associated with the vault. 

// Example sending a request using the AbortVaultLockRequest method.
req := client.AbortVaultLockRequest(params)
resp, err := req.Send()
if err == nil {
    fmt.Println(resp)
}
Example (Shared00)

To abort a vault lock

The example aborts the vault locking process if the vault lock is not in the Locked state for the vault named examplevault. 

package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go-v2/aws"
	"github.com/aws/aws-sdk-go-v2/aws/awserr"
	"github.com/aws/aws-sdk-go-v2/aws/external"
	"github.com/aws/aws-sdk-go-v2/service/glacier"
)

func main() {
	cfg, err := external.LoadDefaultAWSConfig()
	if err != nil {
		panic("failed to load config, " + err.Error())
	}

	svc := glacier.New(cfg)
	input := &glacier.AbortVaultLockInput{
		AccountId: aws.String("-"),
		VaultName: aws.String("examplevault"),
	}

	req := svc.AbortVaultLockRequest(input)
	result, err := req.Send()
	if err != nil {
		if aerr, ok := err.(awserr.Error); ok {
			switch aerr.Code() {
			case glacier.ErrCodeResourceNotFoundException:
				fmt.Println(glacier.ErrCodeResourceNotFoundException, aerr.Error())
			case glacier.ErrCodeInvalidParameterValueException:
				fmt.Println(glacier.ErrCodeInvalidParameterValueException, aerr.Error())
			case glacier.ErrCodeMissingParameterValueException:
				fmt.Println(glacier.ErrCodeMissingParameterValueException, aerr.Error())
			case glacier.ErrCodeServiceUnavailableException:
				fmt.Println(glacier.ErrCodeServiceUnavailableException, aerr.Error())
			default:
				fmt.Println(aerr.Error())
			}
		} else {
			// Print the error, cast err to awserr.Error to get the Code and
			// Message from an error.
			fmt.Println(err.Error())
		}
		return
	}

	fmt.Println(result)
}

Output:

func (*Glacier) AddTagsToVaultRequest 

func (c *Glacier) AddTagsToVaultRequest(input *AddTagsToVaultInput) AddTagsToVaultRequest

AddTagsToVaultRequest returns a request value for making API operation for Amazon Glacier.

This operation adds the specified tags to a vault. Each tag is composed of a key and a value. Each vault can have up to 10 tags. If your request would cause the tag limit for the vault to be exceeded, the operation throws the LimitExceededException error. If a tag already exists on the vault under a specified key, the existing key value will be overwritten. For more information about tags, see Tagging Amazon Glacier Resources (http://docs.aws.amazon.com/amazonglacier/latest/dev/tagging.html). 

// Example sending a request using the AddTagsToVaultRequest method.
req := client.AddTagsToVaultRequest(params)
resp, err := req.Send()
if err == nil {
    fmt.Println(resp)
}
Example (Shared00)

To add tags to a vault

The example adds two tags to a my-vault. 

package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go-v2/aws"
	"github.com/aws/aws-sdk-go-v2/aws/awserr"
	"github.com/aws/aws-sdk-go-v2/aws/external"
	"github.com/aws/aws-sdk-go-v2/service/glacier"
)

func main() {
	cfg, err := external.LoadDefaultAWSConfig()
	if err != nil {
		panic("failed to load config, " + err.Error())
	}

	svc := glacier.New(cfg)
	input := &glacier.AddTagsToVaultInput{
		Tags: map[string]string{
			"examplekey1": "examplevalue1",
			"examplekey2": "examplevalue2",
		},
		AccountId: aws.String("-"),
		VaultName: aws.String("my-vault"),
	}

	req := svc.AddTagsToVaultRequest(input)
	result, err := req.Send()
	if err != nil {
		if aerr, ok := err.(awserr.Error); ok {
			switch aerr.Code() {
			case glacier.ErrCodeInvalidParameterValueException:
				fmt.Println(glacier.ErrCodeInvalidParameterValueException, aerr.Error())
			case glacier.ErrCodeMissingParameterValueException:
				fmt.Println(glacier.ErrCodeMissingParameterValueException, aerr.Error())
			case glacier.ErrCodeResourceNotFoundException:
				fmt.Println(glacier.ErrCodeResourceNotFoundException, aerr.Error())
			case glacier.ErrCodeLimitExceededException:
				fmt.Println(glacier.ErrCodeLimitExceededException, aerr.Error())
			case glacier.ErrCodeServiceUnavailableException:
				fmt.Println(glacier.ErrCodeServiceUnavailableException, aerr.Error())
			default:
				fmt.Println(aerr.Error())
			}
		} else {
			// Print the error, cast err to awserr.Error to get the Code and
			// Message from an error.
			fmt.Println(err.Error())
		}
		return
	}

	fmt.Println(result)
}

Output:

func (*Glacier) CompleteMultipartUploadRequest 

func (c *Glacier) CompleteMultipartUploadRequest(input *CompleteMultipartUploadInput) CompleteMultipartUploadRequest

CompleteMultipartUploadRequest returns a request value for making API operation for Amazon Glacier.

You call this operation to inform Amazon Glacier that all the archive parts have been uploaded and that Amazon Glacier can now assemble the archive from the uploaded parts. After assembling and saving the archive to the vault, Amazon Glacier returns the URI path of the newly created archive resource. Using the URI path, you can then access the archive. After you upload an archive, you should save the archive ID returned to retrieve the archive at a later point. You can also get the vault inventory to obtain a list of archive IDs in a vault. For more information, see InitiateJob.

In the request, you must include the computed SHA256 tree hash of the entire archive you have uploaded. For information about computing a SHA256 tree hash, see Computing Checksums (http://docs.aws.amazon.com/amazonglacier/latest/dev/checksum-calculations.html). On the server side, Amazon Glacier also constructs the SHA256 tree hash of the assembled archive. If the values match, Amazon Glacier saves the archive to the vault; otherwise, it returns an error, and the operation fails. The ListParts operation returns a list of parts uploaded for a specific multipart upload. It includes checksum information for each uploaded part that can be used to debug a bad checksum issue.

Additionally, Amazon Glacier also checks for any missing content ranges when assembling the archive, if missing content ranges are found, Amazon Glacier returns an error and the operation fails.

Complete Multipart Upload is an idempotent operation. After your first successful complete multipart upload, if you call the operation again within a short period, the operation will succeed and return the same archive ID. This is useful in the event you experience a network issue that causes an aborted connection or receive a 500 server error, in which case you can repeat your Complete Multipart Upload request and get the same archive ID without creating duplicate archives. Note, however, that after the multipart upload completes, you cannot call the List Parts operation and the multipart upload will not appear in List Multipart Uploads response, even if idempotent complete is possible.

An AWS account has full permission to perform all operations (actions). However, AWS Identity and Access Management (IAM) users don't have any permissions by default. You must grant them explicit permission to perform specific actions. For more information, see Access Control Using AWS Identity and Access Management (IAM) (http://docs.aws.amazon.com/amazonglacier/latest/dev/using-iam-with-amazon-glacier.html).

For conceptual information and underlying REST API, see Uploading Large Archives in Parts (Multipart Upload) (http://docs.aws.amazon.com/amazonglacier/latest/dev/uploading-archive-mpu.html) and Complete Multipart Upload (http://docs.aws.amazon.com/amazonglacier/latest/dev/api-multipart-complete-upload.html) in the Amazon Glacier Developer Guide. 

// Example sending a request using the CompleteMultipartUploadRequest method.
req := client.CompleteMultipartUploadRequest(params)
resp, err := req.Send()
if err == nil {
    fmt.Println(resp)
}
Example (Shared00)

To complete a multipart upload

The example completes a multipart upload for a 3 MiB archive. 

package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go-v2/aws"
	"github.com/aws/aws-sdk-go-v2/aws/awserr"
	"github.com/aws/aws-sdk-go-v2/aws/external"
	"github.com/aws/aws-sdk-go-v2/service/glacier"
)

func main() {
	cfg, err := external.LoadDefaultAWSConfig()
	if err != nil {
		panic("failed to load config, " + err.Error())
	}

	svc := glacier.New(cfg)
	input := &glacier.CompleteMultipartUploadInput{
		AccountId:   aws.String("-"),
		ArchiveSize: aws.String("3145728"),
		Checksum:    aws.String("9628195fcdbcbbe76cdde456d4646fa7de5f219fb39823836d81f0cc0e18aa67"),
		UploadId:    aws.String("19gaRezEXAMPLES6Ry5YYdqthHOC_kGRCT03L9yetr220UmPtBYKk-OssZtLqyFu7sY1_lR7vgFuJV6NtcV5zpsJ"),
		VaultName:   aws.String("my-vault"),
	}

	req := svc.CompleteMultipartUploadRequest(input)
	result, err := req.Send()
	if err != nil {
		if aerr, ok := err.(awserr.Error); ok {
			switch aerr.Code() {
			case glacier.ErrCodeResourceNotFoundException:
				fmt.Println(glacier.ErrCodeResourceNotFoundException, aerr.Error())
			case glacier.ErrCodeInvalidParameterValueException:
				fmt.Println(glacier.ErrCodeInvalidParameterValueException, aerr.Error())
			case glacier.ErrCodeMissingParameterValueException:
				fmt.Println(glacier.ErrCodeMissingParameterValueException, aerr.Error())
			case glacier.ErrCodeServiceUnavailableException:
				fmt.Println(glacier.ErrCodeServiceUnavailableException, aerr.Error())
			default:
				fmt.Println(aerr.Error())
			}
		} else {
			// Print the error, cast err to awserr.Error to get the Code and
			// Message from an error.
			fmt.Println(err.Error())
		}
		return
	}

	fmt.Println(result)
}

Output:

func (*Glacier) CompleteVaultLockRequest 

func (c *Glacier) CompleteVaultLockRequest(input *CompleteVaultLockInput) CompleteVaultLockRequest

CompleteVaultLockRequest returns a request value for making API operation for Amazon Glacier.

This operation completes the vault locking process by transitioning the vault lock from the InProgress state to the Locked state, which causes the vault lock policy to become unchangeable. A vault lock is put into the InProgress state by calling InitiateVaultLock. You can obtain the state of the vault lock by calling GetVaultLock. For more information about the vault locking process, Amazon Glacier Vault Lock (http://docs.aws.amazon.com/amazonglacier/latest/dev/vault-lock.html).

This operation is idempotent. This request is always successful if the vault lock is in the Locked state and the provided lock ID matches the lock ID originally used to lock the vault.

If an invalid lock ID is passed in the request when the vault lock is in the Locked state, the operation returns an AccessDeniedException error. If an invalid lock ID is passed in the request when the vault lock is in the InProgress state, the operation throws an InvalidParameter error. 

// Example sending a request using the CompleteVaultLockRequest method.
req := client.CompleteVaultLockRequest(params)
resp, err := req.Send()
if err == nil {
    fmt.Println(resp)
}
Example (Shared00)

To complete a vault lock

The example completes the vault locking process by transitioning the vault lock from the InProgress state to the Locked state. 

package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go-v2/aws"
	"github.com/aws/aws-sdk-go-v2/aws/awserr"
	"github.com/aws/aws-sdk-go-v2/aws/external"
	"github.com/aws/aws-sdk-go-v2/service/glacier"
)

func main() {
	cfg, err := external.LoadDefaultAWSConfig()
	if err != nil {
		panic("failed to load config, " + err.Error())
	}

	svc := glacier.New(cfg)
	input := &glacier.CompleteVaultLockInput{
		AccountId: aws.String("-"),
		LockId:    aws.String("AE863rKkWZU53SLW5be4DUcW"),
		VaultName: aws.String("example-vault"),
	}

	req := svc.CompleteVaultLockRequest(input)
	result, err := req.Send()
	if err != nil {
		if aerr, ok := err.(awserr.Error); ok {
			switch aerr.Code() {
			case glacier.ErrCodeResourceNotFoundException:
				fmt.Println(glacier.ErrCodeResourceNotFoundException, aerr.Error())
			case glacier.ErrCodeInvalidParameterValueException:
				fmt.Println(glacier.ErrCodeInvalidParameterValueException, aerr.Error())
			case glacier.ErrCodeMissingParameterValueException:
				fmt.Println(glacier.ErrCodeMissingParameterValueException, aerr.Error())
			case glacier.ErrCodeServiceUnavailableException:
				fmt.Println(glacier.ErrCodeServiceUnavailableException, aerr.Error())
			default:
				fmt.Println(aerr.Error())
			}
		} else {
			// Print the error, cast err to awserr.Error to get the Code and
			// Message from an error.
			fmt.Println(err.Error())
		}
		return
	}

	fmt.Println(result)
}

Output:

func (*Glacier) CreateVaultRequest 

func (c *Glacier) CreateVaultRequest(input *CreateVaultInput) CreateVaultRequest

CreateVaultRequest returns a request value for making API operation for Amazon Glacier.

This operation creates a new vault with the specified name. The name of the vault must be unique within a region for an AWS account. You can create up to 1,000 vaults per account. If you need to create more vaults, contact Amazon Glacier.

You must use the following guidelines when naming a vault.

  • Names can be between 1 and 255 characters long.

  • Allowed characters are a-z, A-Z, 0-9, '_' (underscore), '-' (hyphen), and '.' (period).

This operation is idempotent.

An AWS account has full permission to perform all operations (actions). However, AWS Identity and Access Management (IAM) users don't have any permissions by default. You must grant them explicit permission to perform specific actions. For more information, see Access Control Using AWS Identity and Access Management (IAM) (http://docs.aws.amazon.com/amazonglacier/latest/dev/using-iam-with-amazon-glacier.html).

For conceptual information and underlying REST API, see Creating a Vault in Amazon Glacier (http://docs.aws.amazon.com/amazonglacier/latest/dev/creating-vaults.html) and Create Vault (http://docs.aws.amazon.com/amazonglacier/latest/dev/api-vault-put.html) in the Amazon Glacier Developer Guide. 

// Example sending a request using the CreateVaultRequest method.
req := client.CreateVaultRequest(params)
resp, err := req.Send()
if err == nil {
    fmt.Println(resp)
}
Example (Shared00)

To create a new vault

The following example creates a new vault named my-vault. 

package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go-v2/aws"
	"github.com/aws/aws-sdk-go-v2/aws/awserr"
	"github.com/aws/aws-sdk-go-v2/aws/external"
	"github.com/aws/aws-sdk-go-v2/service/glacier"
)

func main() {
	cfg, err := external.LoadDefaultAWSConfig()
	if err != nil {
		panic("failed to load config, " + err.Error())
	}

	svc := glacier.New(cfg)
	input := &glacier.CreateVaultInput{
		AccountId: aws.String("-"),
		VaultName: aws.String("my-vault"),
	}

	req := svc.CreateVaultRequest(input)
	result, err := req.Send()
	if err != nil {
		if aerr, ok := err.(awserr.Error); ok {
			switch aerr.Code() {
			case glacier.ErrCodeInvalidParameterValueException:
				fmt.Println(glacier.ErrCodeInvalidParameterValueException, aerr.Error())
			case glacier.ErrCodeMissingParameterValueException:
				fmt.Println(glacier.ErrCodeMissingParameterValueException, aerr.Error())
			case glacier.ErrCodeServiceUnavailableException:
				fmt.Println(glacier.ErrCodeServiceUnavailableException, aerr.Error())
			case glacier.ErrCodeLimitExceededException:
				fmt.Println(glacier.ErrCodeLimitExceededException, aerr.Error())
			default:
				fmt.Println(aerr.Error())
			}
		} else {
			// Print the error, cast err to awserr.Error to get the Code and
			// Message from an error.
			fmt.Println(err.Error())
		}
		return
	}

	fmt.Println(result)
}

Output:

func (*Glacier) DeleteArchiveRequest 

func (c *Glacier) DeleteArchiveRequest(input *DeleteArchiveInput) DeleteArchiveRequest

DeleteArchiveRequest returns a request value for making API operation for Amazon Glacier.

This operation deletes an archive from a vault. Subsequent requests to initiate a retrieval of this archive will fail. Archive retrievals that are in progress for this archive ID may or may not succeed according to the following scenarios:

  • If the archive retrieval job is actively preparing the data for download when Amazon Glacier receives the delete archive request, the archival retrieval operation might fail.

  • If the archive retrieval job has successfully prepared the archive for download when Amazon Glacier receives the delete archive request, you will be able to download the output.

This operation is idempotent. Attempting to delete an already-deleted archive does not result in an error.

An AWS account has full permission to perform all operations (actions). However, AWS Identity and Access Management (IAM) users don't have any permissions by default. You must grant them explicit permission to perform specific actions. For more information, see Access Control Using AWS Identity and Access Management (IAM) (http://docs.aws.amazon.com/amazonglacier/latest/dev/using-iam-with-amazon-glacier.html).

For conceptual information and underlying REST API, see Deleting an Archive in Amazon Glacier (http://docs.aws.amazon.com/amazonglacier/latest/dev/deleting-an-archive.html) and Delete Archive (http://docs.aws.amazon.com/amazonglacier/latest/dev/api-archive-delete.html) in the Amazon Glacier Developer Guide. 

// Example sending a request using the DeleteArchiveRequest method.
req := client.DeleteArchiveRequest(params)
resp, err := req.Send()
if err == nil {
    fmt.Println(resp)
}
Example (Shared00)

To delete an archive

The example deletes the archive specified by the archive ID. 

package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go-v2/aws"
	"github.com/aws/aws-sdk-go-v2/aws/awserr"
	"github.com/aws/aws-sdk-go-v2/aws/external"
	"github.com/aws/aws-sdk-go-v2/service/glacier"
)

func main() {
	cfg, err := external.LoadDefaultAWSConfig()
	if err != nil {
		panic("failed to load config, " + err.Error())
	}

	svc := glacier.New(cfg)
	input := &glacier.DeleteArchiveInput{
		AccountId: aws.String("-"),
		ArchiveId: aws.String("NkbByEejwEggmBz2fTHgJrg0XBoDfjP4q6iu87-TjhqG6eGoOY9Z8i1_AUyUsuhPAdTqLHy8pTl5nfCFJmDl2yEZONi5L26Omw12vcs01MNGntHEQL8MBfGlqrEXAMPLEArchiveId"),
		VaultName: aws.String("examplevault"),
	}

	req := svc.DeleteArchiveRequest(input)
	result, err := req.Send()
	if err != nil {
		if aerr, ok := err.(awserr.Error); ok {
			switch aerr.Code() {
			case glacier.ErrCodeResourceNotFoundException:
				fmt.Println(glacier.ErrCodeResourceNotFoundException, aerr.Error())
			case glacier.ErrCodeInvalidParameterValueException:
				fmt.Println(glacier.ErrCodeInvalidParameterValueException, aerr.Error())
			case glacier.ErrCodeMissingParameterValueException:
				fmt.Println(glacier.ErrCodeMissingParameterValueException, aerr.Error())
			case glacier.ErrCodeServiceUnavailableException:
				fmt.Println(glacier.ErrCodeServiceUnavailableException, aerr.Error())
			default:
				fmt.Println(aerr.Error())
			}
		} else {
			// Print the error, cast err to awserr.Error to get the Code and
			// Message from an error.
			fmt.Println(err.Error())
		}
		return
	}

	fmt.Println(result)
}

Output:

func (*Glacier) DeleteVaultAccessPolicyRequest 

func (c *Glacier) DeleteVaultAccessPolicyRequest(input *DeleteVaultAccessPolicyInput) DeleteVaultAccessPolicyRequest

DeleteVaultAccessPolicyRequest returns a request value for making API operation for Amazon Glacier.

This operation deletes the access policy associated with the specified vault. The operation is eventually consistent; that is, it might take some time for Amazon Glacier to completely remove the access policy, and you might still see the effect of the policy for a short time after you send the delete request.

This operation is idempotent. You can invoke delete multiple times, even if there is no policy associated with the vault. For more information about vault access policies, see Amazon Glacier Access Control with Vault Access Policies (http://docs.aws.amazon.com/amazonglacier/latest/dev/vault-access-policy.html). 

// Example sending a request using the DeleteVaultAccessPolicyRequest method.
req := client.DeleteVaultAccessPolicyRequest(params)
resp, err := req.Send()
if err == nil {
    fmt.Println(resp)
}
Example (Shared00)

To delete the vault access policy

The example deletes the access policy associated with the vault named examplevault. 

package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go-v2/aws"
	"github.com/aws/aws-sdk-go-v2/aws/awserr"
	"github.com/aws/aws-sdk-go-v2/aws/external"
	"github.com/aws/aws-sdk-go-v2/service/glacier"
)

func main() {
	cfg, err := external.LoadDefaultAWSConfig()
	if err != nil {
		panic("failed to load config, " + err.Error())
	}

	svc := glacier.New(cfg)
	input := &glacier.DeleteVaultAccessPolicyInput{
		AccountId: aws.String("-"),
		VaultName: aws.String("examplevault"),
	}

	req := svc.DeleteVaultAccessPolicyRequest(input)
	result, err := req.Send()
	if err != nil {
		if aerr, ok := err.(awserr.Error); ok {
			switch aerr.Code() {
			case glacier.ErrCodeResourceNotFoundException:
				fmt.Println(glacier.ErrCodeResourceNotFoundException, aerr.Error())
			case glacier.ErrCodeInvalidParameterValueException:
				fmt.Println(glacier.ErrCodeInvalidParameterValueException, aerr.Error())
			case glacier.ErrCodeMissingParameterValueException:
				fmt.Println(glacier.ErrCodeMissingParameterValueException, aerr.Error())
			case glacier.ErrCodeServiceUnavailableException:
				fmt.Println(glacier.ErrCodeServiceUnavailableException, aerr.Error())
			default:
				fmt.Println(aerr.Error())
			}
		} else {
			// Print the error, cast err to awserr.Error to get the Code and
			// Message from an error.
			fmt.Println(err.Error())
		}
		return
	}

	fmt.Println(result)
}

Output:

func (*Glacier) DeleteVaultNotificationsRequest 

func (c *Glacier) DeleteVaultNotificationsRequest(input *DeleteVaultNotificationsInput) DeleteVaultNotificationsRequest

DeleteVaultNotificationsRequest returns a request value for making API operation for Amazon Glacier.

This operation deletes the notification configuration set for a vault. The operation is eventually consistent; that is, it might take some time for Amazon Glacier to completely disable the notifications and you might still receive some notifications for a short time after you send the delete request.

An AWS account has full permission to perform all operations (actions). However, AWS Identity and Access Management (IAM) users don't have any permissions by default. You must grant them explicit permission to perform specific actions. For more information, see Access Control Using AWS Identity and Access Management (IAM) (http://docs.aws.amazon.com/amazonglacier/latest/dev/using-iam-with-amazon-glacier.html).

For conceptual information and underlying REST API, see Configuring Vault Notifications in Amazon Glacier (http://docs.aws.amazon.com/amazonglacier/latest/dev/configuring-notifications.html) and Delete Vault Notification Configuration (http://docs.aws.amazon.com/amazonglacier/latest/dev/api-vault-notifications-delete.html) in the Amazon Glacier Developer Guide. 

// Example sending a request using the DeleteVaultNotificationsRequest method.
req := client.DeleteVaultNotificationsRequest(params)
resp, err := req.Send()
if err == nil {
    fmt.Println(resp)
}
Example (Shared00)

To delete the notification configuration set for a vault

The example deletes the notification configuration set for the vault named examplevault. 

package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go-v2/aws"
	"github.com/aws/aws-sdk-go-v2/aws/awserr"
	"github.com/aws/aws-sdk-go-v2/aws/external"
	"github.com/aws/aws-sdk-go-v2/service/glacier"
)

func main() {
	cfg, err := external.LoadDefaultAWSConfig()
	if err != nil {
		panic("failed to load config, " + err.Error())
	}

	svc := glacier.New(cfg)
	input := &glacier.DeleteVaultNotificationsInput{
		AccountId: aws.String("-"),
		VaultName: aws.String("examplevault"),
	}

	req := svc.DeleteVaultNotificationsRequest(input)
	result, err := req.Send()
	if err != nil {
		if aerr, ok := err.(awserr.Error); ok {
			switch aerr.Code() {
			case glacier.ErrCodeResourceNotFoundException:
				fmt.Println(glacier.ErrCodeResourceNotFoundException, aerr.Error())
			case glacier.ErrCodeInvalidParameterValueException:
				fmt.Println(glacier.ErrCodeInvalidParameterValueException, aerr.Error())
			case glacier.ErrCodeMissingParameterValueException:
				fmt.Println(glacier.ErrCodeMissingParameterValueException, aerr.Error())
			case glacier.ErrCodeServiceUnavailableException:
				fmt.Println(glacier.ErrCodeServiceUnavailableException, aerr.Error())
			default:
				fmt.Println(aerr.Error())
			}
		} else {
			// Print the error, cast err to awserr.Error to get the Code and
			// Message from an error.
			fmt.Println(err.Error())
		}
		return
	}

	fmt.Println(result)
}

Output:

func (*Glacier) DeleteVaultRequest 

func (c *Glacier) DeleteVaultRequest(input *DeleteVaultInput) DeleteVaultRequest

DeleteVaultRequest returns a request value for making API operation for Amazon Glacier.

This operation deletes a vault. Amazon Glacier will delete a vault only if there are no archives in the vault as of the last inventory and there have been no writes to the vault since the last inventory. If either of these conditions is not satisfied, the vault deletion fails (that is, the vault is not removed) and Amazon Glacier returns an error. You can use DescribeVault to return the number of archives in a vault, and you can use Initiate a Job (POST jobs) (http://docs.aws.amazon.com/amazonglacier/latest/dev/api-initiate-job-post.html) to initiate a new inventory retrieval for a vault. The inventory contains the archive IDs you use to delete archives using Delete Archive (DELETE archive) (http://docs.aws.amazon.com/amazonglacier/latest/dev/api-archive-delete.html).

This operation is idempotent.

An AWS account has full permission to perform all operations (actions). However, AWS Identity and Access Management (IAM) users don't have any permissions by default. You must grant them explicit permission to perform specific actions. For more information, see Access Control Using AWS Identity and Access Management (IAM) (http://docs.aws.amazon.com/amazonglacier/latest/dev/using-iam-with-amazon-glacier.html).

For conceptual information and underlying REST API, see Deleting a Vault in Amazon Glacier (http://docs.aws.amazon.com/amazonglacier/latest/dev/deleting-vaults.html) and Delete Vault (http://docs.aws.amazon.com/amazonglacier/latest/dev/api-vault-delete.html) in the Amazon Glacier Developer Guide. 

// Example sending a request using the DeleteVaultRequest method.
req := client.DeleteVaultRequest(params)
resp, err := req.Send()
if err == nil {
    fmt.Println(resp)
}
Example (Shared00)

To delete a vault

The example deletes a vault named my-vault: 

package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go-v2/aws"
	"github.com/aws/aws-sdk-go-v2/aws/awserr"
	"github.com/aws/aws-sdk-go-v2/aws/external"
	"github.com/aws/aws-sdk-go-v2/service/glacier"
)

func main() {
	cfg, err := external.LoadDefaultAWSConfig()
	if err != nil {
		panic("failed to load config, " + err.Error())
	}

	svc := glacier.New(cfg)
	input := &glacier.DeleteVaultInput{
		AccountId: aws.String("-"),
		VaultName: aws.String("my-vault"),
	}

	req := svc.DeleteVaultRequest(input)
	result, err := req.Send()
	if err != nil {
		if aerr, ok := err.(awserr.Error); ok {
			switch aerr.Code() {
			case glacier.ErrCodeResourceNotFoundException:
				fmt.Println(glacier.ErrCodeResourceNotFoundException, aerr.Error())
			case glacier.ErrCodeInvalidParameterValueException:
				fmt.Println(glacier.ErrCodeInvalidParameterValueException, aerr.Error())
			case glacier.ErrCodeMissingParameterValueException:
				fmt.Println(glacier.ErrCodeMissingParameterValueException, aerr.Error())
			case glacier.ErrCodeServiceUnavailableException:
				fmt.Println(glacier.ErrCodeServiceUnavailableException, aerr.Error())
			default:
				fmt.Println(aerr.Error())
			}
		} else {
			// Print the error, cast err to awserr.Error to get the Code and
			// Message from an error.
			fmt.Println(err.Error())
		}
		return
	}

	fmt.Println(result)
}

Output:

func (*Glacier) DescribeJobRequest 

func (c *Glacier) DescribeJobRequest(input *DescribeJobInput) DescribeJobRequest

DescribeJobRequest returns a request value for making API operation for Amazon Glacier.

This operation returns information about a job you previously initiated, including the job initiation date, the user who initiated the job, the job status code/message and the Amazon SNS topic to notify after Amazon Glacier completes the job. For more information about initiating a job, see InitiateJob.

This operation enables you to check the status of your job. However, it is strongly recommended that you set up an Amazon SNS topic and specify it in your initiate job request so that Amazon Glacier can notify the topic after it completes the job.

A job ID will not expire for at least 24 hours after Amazon Glacier completes the job.

An AWS account has full permission to perform all operations (actions). However, AWS Identity and Access Management (IAM) users don't have any permissions by default. You must grant them explicit permission to perform specific actions. For more information, see Access Control Using AWS Identity and Access Management (IAM) (http://docs.aws.amazon.com/amazonglacier/latest/dev/using-iam-with-amazon-glacier.html).

For more information about using this operation, see the documentation for the underlying REST API Describe Job (http://docs.aws.amazon.com/amazonglacier/latest/dev/api-describe-job-get.html) in the Amazon Glacier Developer Guide. 

// Example sending a request using the DescribeJobRequest method.
req := client.DescribeJobRequest(params)
resp, err := req.Send()
if err == nil {
    fmt.Println(resp)
}
Example (Shared00)

To get information about a previously initiated job

The example returns information about the previously initiated job specified by the job ID. 

package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go-v2/aws"
	"github.com/aws/aws-sdk-go-v2/aws/awserr"
	"github.com/aws/aws-sdk-go-v2/aws/external"
	"github.com/aws/aws-sdk-go-v2/service/glacier"
)

func main() {
	cfg, err := external.LoadDefaultAWSConfig()
	if err != nil {
		panic("failed to load config, " + err.Error())
	}

	svc := glacier.New(cfg)
	input := &glacier.DescribeJobInput{
		AccountId: aws.String("-"),
		JobId:     aws.String("zbxcm3Z_3z5UkoroF7SuZKrxgGoDc3RloGduS7Eg-RO47Yc6FxsdGBgf_Q2DK5Ejh18CnTS5XW4_XqlNHS61dsO4Cn"),
		VaultName: aws.String("my-vault"),
	}

	req := svc.DescribeJobRequest(input)
	result, err := req.Send()
	if err != nil {
		if aerr, ok := err.(awserr.Error); ok {
			switch aerr.Code() {
			case glacier.ErrCodeResourceNotFoundException:
				fmt.Println(glacier.ErrCodeResourceNotFoundException, aerr.Error())
			case glacier.ErrCodeInvalidParameterValueException:
				fmt.Println(glacier.ErrCodeInvalidParameterValueException, aerr.Error())
			case glacier.ErrCodeMissingParameterValueException:
				fmt.Println(glacier.ErrCodeMissingParameterValueException, aerr.Error())
			case glacier.ErrCodeServiceUnavailableException:
				fmt.Println(glacier.ErrCodeServiceUnavailableException, aerr.Error())
			default:
				fmt.Println(aerr.Error())
			}
		} else {
			// Print the error, cast err to awserr.Error to get the Code and
			// Message from an error.
			fmt.Println(err.Error())
		}
		return
	}

	fmt.Println(result)
}

Output:

func (*Glacier) DescribeVaultRequest 

func (c *Glacier) DescribeVaultRequest(input *DescribeVaultInput) DescribeVaultRequest

DescribeVaultRequest returns a request value for making API operation for Amazon Glacier.

This operation returns information about a vault, including the vault's Amazon Resource Name (ARN), the date the vault was created, the number of archives it contains, and the total size of all the archives in the vault. The number of archives and their total size are as of the last inventory generation. This means that if you add or remove an archive from a vault, and then immediately use Describe Vault, the change in contents will not be immediately reflected. If you want to retrieve the latest inventory of the vault, use InitiateJob. Amazon Glacier generates vault inventories approximately daily. For more information, see Downloading a Vault Inventory in Amazon Glacier (http://docs.aws.amazon.com/amazonglacier/latest/dev/vault-inventory.html).

An AWS account has full permission to perform all operations (actions). However, AWS Identity and Access Management (IAM) users don't have any permissions by default. You must grant them explicit permission to perform specific actions. For more information, see Access Control Using AWS Identity and Access Management (IAM) (http://docs.aws.amazon.com/amazonglacier/latest/dev/using-iam-with-amazon-glacier.html).

For conceptual information and underlying REST API, see Retrieving Vault Metadata in Amazon Glacier (http://docs.aws.amazon.com/amazonglacier/latest/dev/retrieving-vault-info.html) and Describe Vault (http://docs.aws.amazon.com/amazonglacier/latest/dev/api-vault-get.html) in the Amazon Glacier Developer Guide. 

// Example sending a request using the DescribeVaultRequest method.
req := client.DescribeVaultRequest(params)
resp, err := req.Send()
if err == nil {
    fmt.Println(resp)
}
Example (Shared00)

To retrieve information about a vault

The example retrieves data about a vault named my-vault. 

package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go-v2/aws"
	"github.com/aws/aws-sdk-go-v2/aws/awserr"
	"github.com/aws/aws-sdk-go-v2/aws/external"
	"github.com/aws/aws-sdk-go-v2/service/glacier"
)

func main() {
	cfg, err := external.LoadDefaultAWSConfig()
	if err != nil {
		panic("failed to load config, " + err.Error())
	}

	svc := glacier.New(cfg)
	input := &glacier.DescribeVaultInput{
		AccountId: aws.String("-"),
		VaultName: aws.String("my-vault"),
	}

	req := svc.DescribeVaultRequest(input)
	result, err := req.Send()
	if err != nil {
		if aerr, ok := err.(awserr.Error); ok {
			switch aerr.Code() {
			case glacier.ErrCodeResourceNotFoundException:
				fmt.Println(glacier.ErrCodeResourceNotFoundException, aerr.Error())
			case glacier.ErrCodeInvalidParameterValueException:
				fmt.Println(glacier.ErrCodeInvalidParameterValueException, aerr.Error())
			case glacier.ErrCodeMissingParameterValueException:
				fmt.Println(glacier.ErrCodeMissingParameterValueException, aerr.Error())
			case glacier.ErrCodeServiceUnavailableException:
				fmt.Println(glacier.ErrCodeServiceUnavailableException, aerr.Error())
			default:
				fmt.Println(aerr.Error())
			}
		} else {
			// Print the error, cast err to awserr.Error to get the Code and
			// Message from an error.
			fmt.Println(err.Error())
		}
		return
	}

	fmt.Println(result)
}

Output:

func (*Glacier) GetDataRetrievalPolicyRequest 

func (c *Glacier) GetDataRetrievalPolicyRequest(input *GetDataRetrievalPolicyInput) GetDataRetrievalPolicyRequest

GetDataRetrievalPolicyRequest returns a request value for making API operation for Amazon Glacier.

This operation returns the current data retrieval policy for the account and region specified in the GET request. For more information about data retrieval policies, see Amazon Glacier Data Retrieval Policies (http://docs.aws.amazon.com/amazonglacier/latest/dev/data-retrieval-policy.html). 

// Example sending a request using the GetDataRetrievalPolicyRequest method.
req := client.GetDataRetrievalPolicyRequest(params)
resp, err := req.Send()
if err == nil {
    fmt.Println(resp)
}
Example (Shared00)

To get the current data retrieval policy for an account

The example returns the current data retrieval policy for the account. 

package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go-v2/aws"
	"github.com/aws/aws-sdk-go-v2/aws/awserr"
	"github.com/aws/aws-sdk-go-v2/aws/external"
	"github.com/aws/aws-sdk-go-v2/service/glacier"
)

func main() {
	cfg, err := external.LoadDefaultAWSConfig()
	if err != nil {
		panic("failed to load config, " + err.Error())
	}

	svc := glacier.New(cfg)
	input := &glacier.GetDataRetrievalPolicyInput{
		AccountId: aws.String("-"),
	}

	req := svc.GetDataRetrievalPolicyRequest(input)
	result, err := req.Send()
	if err != nil {
		if aerr, ok := err.(awserr.Error); ok {
			switch aerr.Code() {
			case glacier.ErrCodeInvalidParameterValueException:
				fmt.Println(glacier.ErrCodeInvalidParameterValueException, aerr.Error())
			case glacier.ErrCodeMissingParameterValueException:
				fmt.Println(glacier.ErrCodeMissingParameterValueException, aerr.Error())
			case glacier.ErrCodeServiceUnavailableException:
				fmt.Println(glacier.ErrCodeServiceUnavailableException, aerr.Error())
			default:
				fmt.Println(aerr.Error())
			}
		} else {
			// Print the error, cast err to awserr.Error to get the Code and
			// Message from an error.
			fmt.Println(err.Error())
		}
		return
	}

	fmt.Println(result)
}

Output:

func (*Glacier) GetJobOutputRequest 

func (c *Glacier) GetJobOutputRequest(input *GetJobOutputInput) GetJobOutputRequest

GetJobOutputRequest returns a request value for making API operation for Amazon Glacier.

This operation downloads the output of the job you initiated using InitiateJob. Depending on the job type you specified when you initiated the job, the output will be either the content of an archive or a vault inventory.

You can download all the job output or download a portion of the output by specifying a byte range. In the case of an archive retrieval job, depending on the byte range you specify, Amazon Glacier returns the checksum for the portion of the data. You can compute the checksum on the client and verify that the values match to ensure the portion you downloaded is the correct data.

A job ID will not expire for at least 24 hours after Amazon Glacier completes the job. That a byte range. For both archive and inventory retrieval jobs, you should verify the downloaded size against the size returned in the headers from the Get Job Output response.

For archive retrieval jobs, you should also verify that the size is what you expected. If you download a portion of the output, the expected size is based on the range of bytes you specified. For example, if you specify a range of bytes=0-1048575, you should verify your download size is 1,048,576 bytes. If you download an entire archive, the expected size is the size of the archive when you uploaded it to Amazon Glacier The expected size is also returned in the headers from the Get Job Output response.

In the case of an archive retrieval job, depending on the byte range you specify, Amazon Glacier returns the checksum for the portion of the data. To ensure the portion you downloaded is the correct data, compute the checksum on the client, verify that the values match, and verify that the size is what you expected.

A job ID does not expire for at least 24 hours after Amazon Glacier completes the job. That is, you can download the job output within the 24 hours period after Amazon Glacier completes the job.

An AWS account has full permission to perform all operations (actions). However, AWS Identity and Access Management (IAM) users don't have any permissions by default. You must grant them explicit permission to perform specific actions. For more information, see Access Control Using AWS Identity and Access Management (IAM) (http://docs.aws.amazon.com/amazonglacier/latest/dev/using-iam-with-amazon-glacier.html).

For conceptual information and the underlying REST API, see Downloading a Vault Inventory (http://docs.aws.amazon.com/amazonglacier/latest/dev/vault-inventory.html), Downloading an Archive (http://docs.aws.amazon.com/amazonglacier/latest/dev/downloading-an-archive.html), and Get Job Output (http://docs.aws.amazon.com/amazonglacier/latest/dev/api-job-output-get.html) 

// Example sending a request using the GetJobOutputRequest method.
req := client.GetJobOutputRequest(params)
resp, err := req.Send()
if err == nil {
    fmt.Println(resp)
}
Example (Shared00)

To get the output of a previously initiated job

The example downloads the output of a previously initiated inventory retrieval job that is identified by the job ID. 

package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go-v2/aws"
	"github.com/aws/aws-sdk-go-v2/aws/awserr"
	"github.com/aws/aws-sdk-go-v2/aws/external"
	"github.com/aws/aws-sdk-go-v2/service/glacier"
)

func main() {
	cfg, err := external.LoadDefaultAWSConfig()
	if err != nil {
		panic("failed to load config, " + err.Error())
	}

	svc := glacier.New(cfg)
	input := &glacier.GetJobOutputInput{
		AccountId: aws.String("-"),
		JobId:     aws.String("zbxcm3Z_3z5UkoroF7SuZKrxgGoDc3RloGduS7Eg-RO47Yc6FxsdGBgf_Q2DK5Ejh18CnTS5XW4_XqlNHS61dsO4CnMW"),
		Range:     aws.String(""),
		VaultName: aws.String("my-vaul"),
	}

	req := svc.GetJobOutputRequest(input)
	result, err := req.Send()
	if err != nil {
		if aerr, ok := err.(awserr.Error); ok {
			switch aerr.Code() {
			case glacier.ErrCodeResourceNotFoundException:
				fmt.Println(glacier.ErrCodeResourceNotFoundException, aerr.Error())
			case glacier.ErrCodeInvalidParameterValueException:
				fmt.Println(glacier.ErrCodeInvalidParameterValueException, aerr.Error())
			case glacier.ErrCodeMissingParameterValueException:
				fmt.Println(glacier.ErrCodeMissingParameterValueException, aerr.Error())
			case glacier.ErrCodeServiceUnavailableException:
				fmt.Println(glacier.ErrCodeServiceUnavailableException, aerr.Error())
			default:
				fmt.Println(aerr.Error())
			}
		} else {
			// Print the error, cast err to awserr.Error to get the Code and
			// Message from an error.
			fmt.Println(err.Error())
		}
		return
	}

	fmt.Println(result)
}

Output:

func (*Glacier) GetVaultAccessPolicyRequest 

func (c *Glacier) GetVaultAccessPolicyRequest(input *GetVaultAccessPolicyInput) GetVaultAccessPolicyRequest

GetVaultAccessPolicyRequest returns a request value for making API operation for Amazon Glacier.

This operation retrieves the access-policy subresource set on the vault; for more information on setting this subresource, see Set Vault Access Policy (PUT access-policy) (http://docs.aws.amazon.com/amazonglacier/latest/dev/api-SetVaultAccessPolicy.html). If there is no access policy set on the vault, the operation returns a 404 Not found error. For more information about vault access policies, see Amazon Glacier Access Control with Vault Access Policies (http://docs.aws.amazon.com/amazonglacier/latest/dev/vault-access-policy.html). 

// Example sending a request using the GetVaultAccessPolicyRequest method.
req := client.GetVaultAccessPolicyRequest(params)
resp, err := req.Send()
if err == nil {
    fmt.Println(resp)
}
Example (Shared00)

To get the access-policy set on the vault

The example retrieves the access-policy set on the vault named example-vault. 

package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go-v2/aws"
	"github.com/aws/aws-sdk-go-v2/aws/awserr"
	"github.com/aws/aws-sdk-go-v2/aws/external"
	"github.com/aws/aws-sdk-go-v2/service/glacier"
)

func main() {
	cfg, err := external.LoadDefaultAWSConfig()
	if err != nil {
		panic("failed to load config, " + err.Error())
	}

	svc := glacier.New(cfg)
	input := &glacier.GetVaultAccessPolicyInput{
		AccountId: aws.String("-"),
		VaultName: aws.String("example-vault"),
	}

	req := svc.GetVaultAccessPolicyRequest(input)
	result, err := req.Send()
	if err != nil {
		if aerr, ok := err.(awserr.Error); ok {
			switch aerr.Code() {
			case glacier.ErrCodeResourceNotFoundException:
				fmt.Println(glacier.ErrCodeResourceNotFoundException, aerr.Error())
			case glacier.ErrCodeInvalidParameterValueException:
				fmt.Println(glacier.ErrCodeInvalidParameterValueException, aerr.Error())
			case glacier.ErrCodeMissingParameterValueException:
				fmt.Println(glacier.ErrCodeMissingParameterValueException, aerr.Error())
			case glacier.ErrCodeServiceUnavailableException:
				fmt.Println(glacier.ErrCodeServiceUnavailableException, aerr.Error())
			default:
				fmt.Println(aerr.Error())
			}
		} else {
			// Print the error, cast err to awserr.Error to get the Code and
			// Message from an error.
			fmt.Println(err.Error())
		}
		return
	}

	fmt.Println(result)
}

Output:

func (*Glacier) GetVaultLockRequest 

func (c *Glacier) GetVaultLockRequest(input *GetVaultLockInput) GetVaultLockRequest

GetVaultLockRequest returns a request value for making API operation for Amazon Glacier.

This operation retrieves the following attributes from the lock-policy subresource set on the specified vault:

  • The vault lock policy set on the vault.

  • The state of the vault lock, which is either InProgess or Locked.

  • When the lock ID expires. The lock ID is used to complete the vault locking process.

  • When the vault lock was initiated and put into the InProgress state.

A vault lock is put into the InProgress state by calling InitiateVaultLock. A vault lock is put into the Locked state by calling CompleteVaultLock. You can abort the vault locking process by calling AbortVaultLock. For more information about the vault locking process, Amazon Glacier Vault Lock (http://docs.aws.amazon.com/amazonglacier/latest/dev/vault-lock.html).

If there is no vault lock policy set on the vault, the operation returns a 404 Not found error. For more information about vault lock policies, Amazon Glacier Access Control with Vault Lock Policies (http://docs.aws.amazon.com/amazonglacier/latest/dev/vault-lock-policy.html). 

// Example sending a request using the GetVaultLockRequest method.
req := client.GetVaultLockRequest(params)
resp, err := req.Send()
if err == nil {
    fmt.Println(resp)
}
Example (Shared00)

To retrieve vault lock-policy related attributes that are set on a vault

The example retrieves the attributes from the lock-policy subresource set on the vault named examplevault. 

package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go-v2/aws"
	"github.com/aws/aws-sdk-go-v2/aws/awserr"
	"github.com/aws/aws-sdk-go-v2/aws/external"
	"github.com/aws/aws-sdk-go-v2/service/glacier"
)

func main() {
	cfg, err := external.LoadDefaultAWSConfig()
	if err != nil {
		panic("failed to load config, " + err.Error())
	}

	svc := glacier.New(cfg)
	input := &glacier.GetVaultLockInput{
		AccountId: aws.String("-"),
		VaultName: aws.String("examplevault"),
	}

	req := svc.GetVaultLockRequest(input)
	result, err := req.Send()
	if err != nil {
		if aerr, ok := err.(awserr.Error); ok {
			switch aerr.Code() {
			case glacier.ErrCodeResourceNotFoundException:
				fmt.Println(glacier.ErrCodeResourceNotFoundException, aerr.Error())
			case glacier.ErrCodeInvalidParameterValueException:
				fmt.Println(glacier.ErrCodeInvalidParameterValueException, aerr.Error())
			case glacier.ErrCodeMissingParameterValueException:
				fmt.Println(glacier.ErrCodeMissingParameterValueException, aerr.Error())
			case glacier.ErrCodeServiceUnavailableException:
				fmt.Println(glacier.ErrCodeServiceUnavailableException, aerr.Error())
			default:
				fmt.Println(aerr.Error())
			}
		} else {
			// Print the error, cast err to awserr.Error to get the Code and
			// Message from an error.
			fmt.Println(err.Error())
		}
		return
	}

	fmt.Println(result)
}

Output:

func (*Glacier) GetVaultNotificationsRequest 

func (c *Glacier) GetVaultNotificationsRequest(input *GetVaultNotificationsInput) GetVaultNotificationsRequest

GetVaultNotificationsRequest returns a request value for making API operation for Amazon Glacier.

This operation retrieves the notification-configuration subresource of the specified vault.

For information about setting a notification configuration on a vault, see SetVaultNotifications. If a notification configuration for a vault is not set, the operation returns a 404 Not Found error. For more information about vault notifications, see Configuring Vault Notifications in Amazon Glacier (http://docs.aws.amazon.com/amazonglacier/latest/dev/configuring-notifications.html).

An AWS account has full permission to perform all operations (actions). However, AWS Identity and Access Management (IAM) users don't have any permissions by default. You must grant them explicit permission to perform specific actions. For more information, see Access Control Using AWS Identity and Access Management (IAM) (http://docs.aws.amazon.com/amazonglacier/latest/dev/using-iam-with-amazon-glacier.html).

For conceptual information and underlying REST API, see Configuring Vault Notifications in Amazon Glacier (http://docs.aws.amazon.com/amazonglacier/latest/dev/configuring-notifications.html) and Get Vault Notification Configuration (http://docs.aws.amazon.com/amazonglacier/latest/dev/api-vault-notifications-get.html) in the Amazon Glacier Developer Guide. 

// Example sending a request using the GetVaultNotificationsRequest method.
req := client.GetVaultNotificationsRequest(params)
resp, err := req.Send()
if err == nil {
    fmt.Println(resp)
}
Example (Shared00)

To get the notification-configuration for the specified vault

The example retrieves the notification-configuration for the vault named my-vault. 

package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go-v2/aws"
	"github.com/aws/aws-sdk-go-v2/aws/awserr"
	"github.com/aws/aws-sdk-go-v2/aws/external"
	"github.com/aws/aws-sdk-go-v2/service/glacier"
)

func main() {
	cfg, err := external.LoadDefaultAWSConfig()
	if err != nil {
		panic("failed to load config, " + err.Error())
	}

	svc := glacier.New(cfg)
	input := &glacier.GetVaultNotificationsInput{
		AccountId: aws.String("-"),
		VaultName: aws.String("my-vault"),
	}

	req := svc.GetVaultNotificationsRequest(input)
	result, err := req.Send()
	if err != nil {
		if aerr, ok := err.(awserr.Error); ok {
			switch aerr.Code() {
			case glacier.ErrCodeResourceNotFoundException:
				fmt.Println(glacier.ErrCodeResourceNotFoundException, aerr.Error())
			case glacier.ErrCodeInvalidParameterValueException:
				fmt.Println(glacier.ErrCodeInvalidParameterValueException, aerr.Error())
			case glacier.ErrCodeMissingParameterValueException:
				fmt.Println(glacier.ErrCodeMissingParameterValueException, aerr.Error())
			case glacier.ErrCodeServiceUnavailableException:
				fmt.Println(glacier.ErrCodeServiceUnavailableException, aerr.Error())
			default:
				fmt.Println(aerr.Error())
			}
		} else {
			// Print the error, cast err to awserr.Error to get the Code and
			// Message from an error.
			fmt.Println(err.Error())
		}
		return
	}

	fmt.Println(result)
}

Output:

func (*Glacier) InitiateJobRequest 

func (c *Glacier) InitiateJobRequest(input *InitiateJobInput) InitiateJobRequest

InitiateJobRequest returns a request value for making API operation for Amazon Glacier.

This operation initiates a job of the specified type, which can be a select, an archival retrieval, or a vault retrieval. For more information about using this operation, see the documentation for the underlying REST API Initiate a Job (http://docs.aws.amazon.com/amazonglacier/latest/dev/api-initiate-job-post.html). 

// Example sending a request using the InitiateJobRequest method.
req := client.InitiateJobRequest(params)
resp, err := req.Send()
if err == nil {
    fmt.Println(resp)
}
Example (Shared00)

To initiate an inventory-retrieval job

The example initiates an inventory-retrieval job for the vault named examplevault. 

package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go-v2/aws"
	"github.com/aws/aws-sdk-go-v2/aws/awserr"
	"github.com/aws/aws-sdk-go-v2/aws/external"
	"github.com/aws/aws-sdk-go-v2/service/glacier"
)

func main() {
	cfg, err := external.LoadDefaultAWSConfig()
	if err != nil {
		panic("failed to load config, " + err.Error())
	}

	svc := glacier.New(cfg)
	input := &glacier.InitiateJobInput{
		AccountId: aws.String("-"),
		JobParameters: &glacier.JobParameters{
			Description: aws.String("My inventory job"),
			Format:      aws.String("CSV"),
			SNSTopic:    aws.String("arn:aws:sns:us-west-2:111111111111:Glacier-InventoryRetrieval-topic-Example"),
			Type:        aws.String("inventory-retrieval"),
		},
		VaultName: aws.String("examplevault"),
	}

	req := svc.InitiateJobRequest(input)
	result, err := req.Send()
	if err != nil {
		if aerr, ok := err.(awserr.Error); ok {
			switch aerr.Code() {
			case glacier.ErrCodeResourceNotFoundException:
				fmt.Println(glacier.ErrCodeResourceNotFoundException, aerr.Error())
			case glacier.ErrCodePolicyEnforcedException:
				fmt.Println(glacier.ErrCodePolicyEnforcedException, aerr.Error())
			case glacier.ErrCodeInvalidParameterValueException:
				fmt.Println(glacier.ErrCodeInvalidParameterValueException, aerr.Error())
			case glacier.ErrCodeMissingParameterValueException:
				fmt.Println(glacier.ErrCodeMissingParameterValueException, aerr.Error())
			case glacier.ErrCodeInsufficientCapacityException:
				fmt.Println(glacier.ErrCodeInsufficientCapacityException, aerr.Error())
			case glacier.ErrCodeServiceUnavailableException:
				fmt.Println(glacier.ErrCodeServiceUnavailableException, aerr.Error())
			default:
				fmt.Println(aerr.Error())
			}
		} else {
			// Print the error, cast err to awserr.Error to get the Code and
			// Message from an error.
			fmt.Println(err.Error())
		}
		return
	}

	fmt.Println(result)
}

Output:

func (*Glacier) InitiateMultipartUploadRequest 

func (c *Glacier) InitiateMultipartUploadRequest(input *InitiateMultipartUploadInput) InitiateMultipartUploadRequest

InitiateMultipartUploadRequest returns a request value for making API operation for Amazon Glacier.

This operation initiates a multipart upload. Amazon Glacier creates a multipart upload resource and returns its ID in the response. The multipart upload ID is used in subsequent requests to upload parts of an archive (see UploadMultipartPart).

When you initiate a multipart upload, you specify the part size in number of bytes. The part size must be a megabyte (1024 KB) multiplied by a power of 2-for example, 1048576 (1 MB), 2097152 (2 MB), 4194304 (4 MB), 8388608 (8 MB), and so on. The minimum allowable part size is 1 MB, and the maximum is 4 GB.

Every part you upload to this resource (see UploadMultipartPart), except the last one, must have the same size. The last one can be the same size or smaller. For example, suppose you want to upload a 16.2 MB file. If you initiate the multipart upload with a part size of 4 MB, you will upload four parts of 4 MB each and one part of 0.2 MB.

You don't need to know the size of the archive when you start a multipart upload because Amazon Glacier does not require you to specify the overall archive size.

After you complete the multipart upload, Amazon Glacier removes the multipart upload resource referenced by the ID. Amazon Glacier also removes the multipart upload resource if you cancel the multipart upload or it may be removed if there is no activity for a period of 24 hours.

An AWS account has full permission to perform all operations (actions). However, AWS Identity and Access Management (IAM) users don't have any permissions by default. You must grant them explicit permission to perform specific actions. For more information, see Access Control Using AWS Identity and Access Management (IAM) (http://docs.aws.amazon.com/amazonglacier/latest/dev/using-iam-with-amazon-glacier.html).

For conceptual information and underlying REST API, see Uploading Large Archives in Parts (Multipart Upload) (http://docs.aws.amazon.com/amazonglacier/latest/dev/uploading-archive-mpu.html) and Initiate Multipart Upload (http://docs.aws.amazon.com/amazonglacier/latest/dev/api-multipart-initiate-upload.html) in the Amazon Glacier Developer Guide. 

// Example sending a request using the InitiateMultipartUploadRequest method.
req := client.InitiateMultipartUploadRequest(params)
resp, err := req.Send()
if err == nil {
    fmt.Println(resp)
}
Example (Shared00)

To initiate a multipart upload

The example initiates a multipart upload to a vault named my-vault with a part size of 1 MiB (1024 x 1024 bytes) per file. 

package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go-v2/aws"
	"github.com/aws/aws-sdk-go-v2/aws/awserr"
	"github.com/aws/aws-sdk-go-v2/aws/external"
	"github.com/aws/aws-sdk-go-v2/service/glacier"
)

func main() {
	cfg, err := external.LoadDefaultAWSConfig()
	if err != nil {
		panic("failed to load config, " + err.Error())
	}

	svc := glacier.New(cfg)
	input := &glacier.InitiateMultipartUploadInput{
		AccountId: aws.String("-"),
		PartSize:  aws.String("1048576"),
		VaultName: aws.String("my-vault"),
	}

	req := svc.InitiateMultipartUploadRequest(input)
	result, err := req.Send()
	if err != nil {
		if aerr, ok := err.(awserr.Error); ok {
			switch aerr.Code() {
			case glacier.ErrCodeResourceNotFoundException:
				fmt.Println(glacier.ErrCodeResourceNotFoundException, aerr.Error())
			case glacier.ErrCodeInvalidParameterValueException:
				fmt.Println(glacier.ErrCodeInvalidParameterValueException, aerr.Error())
			case glacier.ErrCodeMissingParameterValueException:
				fmt.Println(glacier.ErrCodeMissingParameterValueException, aerr.Error())
			case glacier.ErrCodeServiceUnavailableException:
				fmt.Println(glacier.ErrCodeServiceUnavailableException, aerr.Error())
			default:
				fmt.Println(aerr.Error())
			}
		} else {
			// Print the error, cast err to awserr.Error to get the Code and
			// Message from an error.
			fmt.Println(err.Error())
		}
		return
	}

	fmt.Println(result)
}

Output:

func (*Glacier) InitiateVaultLockRequest 

func (c *Glacier) InitiateVaultLockRequest(input *InitiateVaultLockInput) InitiateVaultLockRequest

InitiateVaultLockRequest returns a request value for making API operation for Amazon Glacier.

This operation initiates the vault locking process by doing the following:

  • Installing a vault lock policy on the specified vault.

  • Setting the lock state of vault lock to InProgress.

  • Returning a lock ID, which is used to complete the vault locking process.

You can set one vault lock policy for each vault and this policy can be up to 20 KB in size. For more information about vault lock policies, see Amazon Glacier Access Control with Vault Lock Policies (http://docs.aws.amazon.com/amazonglacier/latest/dev/vault-lock-policy.html).

You must complete the vault locking process within 24 hours after the vault lock enters the InProgress state. After the 24 hour window ends, the lock ID expires, the vault automatically exits the InProgress state, and the vault lock policy is removed from the vault. You call CompleteVaultLock to complete the vault locking process by setting the state of the vault lock to Locked.

After a vault lock is in the Locked state, you cannot initiate a new vault lock for the vault.

You can abort the vault locking process by calling AbortVaultLock. You can get the state of the vault lock by calling GetVaultLock. For more information about the vault locking process, Amazon Glacier Vault Lock (http://docs.aws.amazon.com/amazonglacier/latest/dev/vault-lock.html).

If this operation is called when the vault lock is in the InProgress state, the operation returns an AccessDeniedException error. When the vault lock is in the InProgress state you must call AbortVaultLock before you can initiate a new vault lock policy. 

// Example sending a request using the InitiateVaultLockRequest method.
req := client.InitiateVaultLockRequest(params)
resp, err := req.Send()
if err == nil {
    fmt.Println(resp)
}
Example (Shared00)

To initiate the vault locking process

The example initiates the vault locking process for the vault named my-vault. 

package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go-v2/aws"
	"github.com/aws/aws-sdk-go-v2/aws/awserr"
	"github.com/aws/aws-sdk-go-v2/aws/external"
	"github.com/aws/aws-sdk-go-v2/service/glacier"
)

func main() {
	cfg, err := external.LoadDefaultAWSConfig()
	if err != nil {
		panic("failed to load config, " + err.Error())
	}

	svc := glacier.New(cfg)
	input := &glacier.InitiateVaultLockInput{
		AccountId: aws.String("-"),
		Policy: &glacier.VaultLockPolicy{
			Policy: aws.String("{\"Version\":\"2012-10-17\",\"Statement\":[{\"Sid\":\"Define-vault-lock\",\"Effect\":\"Deny\",\"Principal\":{\"AWS\":\"arn:aws:iam::999999999999:root\"},\"Action\":\"glacier:DeleteArchive\",\"Resource\":\"arn:aws:glacier:us-west-2:999999999999:vaults/examplevault\",\"Condition\":{\"NumericLessThanEquals\":{\"glacier:ArchiveAgeinDays\":\"365\"}}}]}"),
		},
		VaultName: aws.String("my-vault"),
	}

	req := svc.InitiateVaultLockRequest(input)
	result, err := req.Send()
	if err != nil {
		if aerr, ok := err.(awserr.Error); ok {
			switch aerr.Code() {
			case glacier.ErrCodeResourceNotFoundException:
				fmt.Println(glacier.ErrCodeResourceNotFoundException, aerr.Error())
			case glacier.ErrCodeInvalidParameterValueException:
				fmt.Println(glacier.ErrCodeInvalidParameterValueException, aerr.Error())
			case glacier.ErrCodeMissingParameterValueException:
				fmt.Println(glacier.ErrCodeMissingParameterValueException, aerr.Error())
			case glacier.ErrCodeServiceUnavailableException:
				fmt.Println(glacier.ErrCodeServiceUnavailableException, aerr.Error())
			default:
				fmt.Println(aerr.Error())
			}
		} else {
			// Print the error, cast err to awserr.Error to get the Code and
			// Message from an error.
			fmt.Println(err.Error())
		}
		return
	}

	fmt.Println(result)
}

Output:

func (*Glacier) ListJobsRequest 

func (c *Glacier) ListJobsRequest(input *ListJobsInput) ListJobsRequest

ListJobsRequest returns a request value for making API operation for Amazon Glacier.

This operation lists jobs for a vault, including jobs that are in-progress and jobs that have recently finished. The List Job operation returns a list of these jobs sorted by job initiation time.

Amazon Glacier retains recently completed jobs for a period before deleting them; however, it eventually removes completed jobs. The output of completed jobs can be retrieved. Retaining completed jobs for a period of time after they have completed enables you to get a job output in the event you miss the job completion notification or your first attempt to download it fails. For example, suppose you start an archive retrieval job to download an archive. After the job completes, you start to download the archive but encounter a network error. In this scenario, you can retry and download the archive while the job exists.

The List Jobs operation supports pagination. You should always check the response Marker field. If there are no more jobs to list, the Marker field is set to null. If there are more jobs to list, the Marker field is set to a non-null value, which you can use to continue the pagination of the list. To return a list of jobs that begins at a specific job, set the marker request parameter to the Marker value for that job that you obtained from a previous List Jobs request.

You can set a maximum limit for the number of jobs returned in the response by specifying the limit parameter in the request. The default limit is 1000. The number of jobs returned might be fewer than the limit, but the number of returned jobs never exceeds the limit.

Additionally, you can filter the jobs list returned by specifying the optional statuscode parameter or completed parameter, or both. Using the statuscode parameter, you can specify to return only jobs that match either the InProgress, Succeeded, or Failed status. Using the completed parameter, you can specify to return only jobs that were completed (true) or jobs that were not completed (false).

For more information about using this operation, see the documentation for the underlying REST API List Jobs (http://docs.aws.amazon.com/amazonglacier/latest/dev/api-jobs-get.html). 

// Example sending a request using the ListJobsRequest method.
req := client.ListJobsRequest(params)
resp, err := req.Send()
if err == nil {
    fmt.Println(resp)
}
Example (Shared00)

To list jobs for a vault

The example lists jobs for the vault named my-vault. 

package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go-v2/aws"
	"github.com/aws/aws-sdk-go-v2/aws/awserr"
	"github.com/aws/aws-sdk-go-v2/aws/external"
	"github.com/aws/aws-sdk-go-v2/service/glacier"
)

func main() {
	cfg, err := external.LoadDefaultAWSConfig()
	if err != nil {
		panic("failed to load config, " + err.Error())
	}

	svc := glacier.New(cfg)
	input := &glacier.ListJobsInput{
		AccountId: aws.String("-"),
		VaultName: aws.String("my-vault"),
	}

	req := svc.ListJobsRequest(input)
	result, err := req.Send()
	if err != nil {
		if aerr, ok := err.(awserr.Error); ok {
			switch aerr.Code() {
			case glacier.ErrCodeResourceNotFoundException:
				fmt.Println(glacier.ErrCodeResourceNotFoundException, aerr.Error())
			case glacier.ErrCodeInvalidParameterValueException:
				fmt.Println(glacier.ErrCodeInvalidParameterValueException, aerr.Error())
			case glacier.ErrCodeMissingParameterValueException:
				fmt.Println(glacier.ErrCodeMissingParameterValueException, aerr.Error())
			case glacier.ErrCodeServiceUnavailableException:
				fmt.Println(glacier.ErrCodeServiceUnavailableException, aerr.Error())
			default:
				fmt.Println(aerr.Error())
			}
		} else {
			// Print the error, cast err to awserr.Error to get the Code and
			// Message from an error.
			fmt.Println(err.Error())
		}
		return
	}

	fmt.Println(result)
}

Output:

func (*Glacier) ListMultipartUploadsRequest 

func (c *Glacier) ListMultipartUploadsRequest(input *ListMultipartUploadsInput) ListMultipartUploadsRequest

ListMultipartUploadsRequest returns a request value for making API operation for Amazon Glacier.

This operation lists in-progress multipart uploads for the specified vault. An in-progress multipart upload is a multipart upload that has been initiated by an InitiateMultipartUpload request, but has not yet been completed or aborted. The list returned in the List Multipart Upload response has no guaranteed order.

The List Multipart Uploads operation supports pagination. By default, this operation returns up to 1,000 multipart uploads in the response. You should always check the response for a marker at which to continue the list; if there are no more items the marker is null. To return a list of multipart uploads that begins at a specific upload, set the marker request parameter to the value you obtained from a previous List Multipart Upload request. You can also limit the number of uploads returned in the response by specifying the limit parameter in the request.

Note the difference between this operation and listing parts (ListParts). The List Multipart Uploads operation lists all multipart uploads for a vault and does not require a multipart upload ID. The List Parts operation requires a multipart upload ID since parts are associated with a single upload.

An AWS account has full permission to perform all operations (actions). However, AWS Identity and Access Management (IAM) users don't have any permissions by default. You must grant them explicit permission to perform specific actions. For more information, see Access Control Using AWS Identity and Access Management (IAM) (http://docs.aws.amazon.com/amazonglacier/latest/dev/using-iam-with-amazon-glacier.html).

For conceptual information and the underlying REST API, see Working with Archives in Amazon Glacier (http://docs.aws.amazon.com/amazonglacier/latest/dev/working-with-archives.html) and List Multipart Uploads (http://docs.aws.amazon.com/amazonglacier/latest/dev/api-multipart-list-uploads.html) in the Amazon Glacier Developer Guide. 

// Example sending a request using the ListMultipartUploadsRequest method.
req := client.ListMultipartUploadsRequest(params)
resp, err := req.Send()
if err == nil {
    fmt.Println(resp)
}
Example (Shared00)

To list all the in-progress multipart uploads for a vault

The example lists all the in-progress multipart uploads for the vault named examplevault. 

package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go-v2/aws"
	"github.com/aws/aws-sdk-go-v2/aws/awserr"
	"github.com/aws/aws-sdk-go-v2/aws/external"
	"github.com/aws/aws-sdk-go-v2/service/glacier"
)

func main() {
	cfg, err := external.LoadDefaultAWSConfig()
	if err != nil {
		panic("failed to load config, " + err.Error())
	}

	svc := glacier.New(cfg)
	input := &glacier.ListMultipartUploadsInput{
		AccountId: aws.String("-"),
		VaultName: aws.String("examplevault"),
	}

	req := svc.ListMultipartUploadsRequest(input)
	result, err := req.Send()
	if err != nil {
		if aerr, ok := err.(awserr.Error); ok {
			switch aerr.Code() {
			case glacier.ErrCodeResourceNotFoundException:
				fmt.Println(glacier.ErrCodeResourceNotFoundException, aerr.Error())
			case glacier.ErrCodeInvalidParameterValueException:
				fmt.Println(glacier.ErrCodeInvalidParameterValueException, aerr.Error())
			case glacier.ErrCodeMissingParameterValueException:
				fmt.Println(glacier.ErrCodeMissingParameterValueException, aerr.Error())
			case glacier.ErrCodeServiceUnavailableException:
				fmt.Println(glacier.ErrCodeServiceUnavailableException, aerr.Error())
			default:
				fmt.Println(aerr.Error())
			}
		} else {
			// Print the error, cast err to awserr.Error to get the Code and
			// Message from an error.
			fmt.Println(err.Error())
		}
		return
	}

	fmt.Println(result)
}

Output:

func (*Glacier) ListPartsRequest 

func (c *Glacier) ListPartsRequest(input *ListPartsInput) ListPartsRequest

ListPartsRequest returns a request value for making API operation for Amazon Glacier.

This operation lists the parts of an archive that have been uploaded in a specific multipart upload. You can make this request at any time during an in-progress multipart upload before you complete the upload (see CompleteMultipartUpload. List Parts returns an error for completed uploads. The list returned in the List Parts response is sorted by part range.

The List Parts operation supports pagination. By default, this operation returns up to 1,000 uploaded parts in the response. You should always check the response for a marker at which to continue the list; if there are no more items the marker is null. To return a list of parts that begins at a specific part, set the marker request parameter to the value you obtained from a previous List Parts request. You can also limit the number of parts returned in the response by specifying the limit parameter in the request.

An AWS account has full permission to perform all operations (actions). However, AWS Identity and Access Management (IAM) users don't have any permissions by default. You must grant them explicit permission to perform specific actions. For more information, see Access Control Using AWS Identity and Access Management (IAM) (http://docs.aws.amazon.com/amazonglacier/latest/dev/using-iam-with-amazon-glacier.html).

For conceptual information and the underlying REST API, see Working with Archives in Amazon Glacier (http://docs.aws.amazon.com/amazonglacier/latest/dev/working-with-archives.html) and List Parts (http://docs.aws.amazon.com/amazonglacier/latest/dev/api-multipart-list-parts.html) in the Amazon Glacier Developer Guide. 

// Example sending a request using the ListPartsRequest method.
req := client.ListPartsRequest(params)
resp, err := req.Send()
if err == nil {
    fmt.Println(resp)
}
Example (Shared00)

To list the parts of an archive that have been uploaded in a multipart upload

The example lists all the parts of a multipart upload. 

package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go-v2/aws"
	"github.com/aws/aws-sdk-go-v2/aws/awserr"
	"github.com/aws/aws-sdk-go-v2/aws/external"
	"github.com/aws/aws-sdk-go-v2/service/glacier"
)

func main() {
	cfg, err := external.LoadDefaultAWSConfig()
	if err != nil {
		panic("failed to load config, " + err.Error())
	}

	svc := glacier.New(cfg)
	input := &glacier.ListPartsInput{
		AccountId: aws.String("-"),
		UploadId:  aws.String("OW2fM5iVylEpFEMM9_HpKowRapC3vn5sSL39_396UW9zLFUWVrnRHaPjUJddQ5OxSHVXjYtrN47NBZ-khxOjyEXAMPLE"),
		VaultName: aws.String("examplevault"),
	}

	req := svc.ListPartsRequest(input)
	result, err := req.Send()
	if err != nil {
		if aerr, ok := err.(awserr.Error); ok {
			switch aerr.Code() {
			case glacier.ErrCodeResourceNotFoundException:
				fmt.Println(glacier.ErrCodeResourceNotFoundException, aerr.Error())
			case glacier.ErrCodeInvalidParameterValueException:
				fmt.Println(glacier.ErrCodeInvalidParameterValueException, aerr.Error())
			case glacier.ErrCodeMissingParameterValueException:
				fmt.Println(glacier.ErrCodeMissingParameterValueException, aerr.Error())
			case glacier.ErrCodeServiceUnavailableException:
				fmt.Println(glacier.ErrCodeServiceUnavailableException, aerr.Error())
			default:
				fmt.Println(aerr.Error())
			}
		} else {
			// Print the error, cast err to awserr.Error to get the Code and
			// Message from an error.
			fmt.Println(err.Error())
		}
		return
	}

	fmt.Println(result)
}

Output:

func (*Glacier) ListProvisionedCapacityRequest 

func (c *Glacier) ListProvisionedCapacityRequest(input *ListProvisionedCapacityInput) ListProvisionedCapacityRequest

ListProvisionedCapacityRequest returns a request value for making API operation for Amazon Glacier.

This operation lists the provisioned capacity units for the specified AWS account. 

// Example sending a request using the ListProvisionedCapacityRequest method.
req := client.ListProvisionedCapacityRequest(params)
resp, err := req.Send()
if err == nil {
    fmt.Println(resp)
}
Example (Shared00)

To list the provisioned capacity units for an account

The example lists the provisioned capacity units for an account. 

package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go-v2/aws"
	"github.com/aws/aws-sdk-go-v2/aws/awserr"
	"github.com/aws/aws-sdk-go-v2/aws/external"
	"github.com/aws/aws-sdk-go-v2/service/glacier"
)

func main() {
	cfg, err := external.LoadDefaultAWSConfig()
	if err != nil {
		panic("failed to load config, " + err.Error())
	}

	svc := glacier.New(cfg)
	input := &glacier.ListProvisionedCapacityInput{
		AccountId: aws.String("-"),
	}

	req := svc.ListProvisionedCapacityRequest(input)
	result, err := req.Send()
	if err != nil {
		if aerr, ok := err.(awserr.Error); ok {
			switch aerr.Code() {
			case glacier.ErrCodeInvalidParameterValueException:
				fmt.Println(glacier.ErrCodeInvalidParameterValueException, aerr.Error())
			case glacier.ErrCodeMissingParameterValueException:
				fmt.Println(glacier.ErrCodeMissingParameterValueException, aerr.Error())
			case glacier.ErrCodeServiceUnavailableException:
				fmt.Println(glacier.ErrCodeServiceUnavailableException, aerr.Error())
			default:
				fmt.Println(aerr.Error())
			}
		} else {
			// Print the error, cast err to awserr.Error to get the Code and
			// Message from an error.
			fmt.Println(err.Error())
		}
		return
	}

	fmt.Println(result)
}

Output:

func (*Glacier) ListTagsForVaultRequest 

func (c *Glacier) ListTagsForVaultRequest(input *ListTagsForVaultInput) ListTagsForVaultRequest

ListTagsForVaultRequest returns a request value for making API operation for Amazon Glacier.

This operation lists all the tags attached to a vault. The operation returns an empty map if there are no tags. For more information about tags, see Tagging Amazon Glacier Resources (http://docs.aws.amazon.com/amazonglacier/latest/dev/tagging.html). 

// Example sending a request using the ListTagsForVaultRequest method.
req := client.ListTagsForVaultRequest(params)
resp, err := req.Send()
if err == nil {
    fmt.Println(resp)
}
Example (Shared00)

To list the tags for a vault

The example lists all the tags attached to the vault examplevault. 

package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go-v2/aws"
	"github.com/aws/aws-sdk-go-v2/aws/awserr"
	"github.com/aws/aws-sdk-go-v2/aws/external"
	"github.com/aws/aws-sdk-go-v2/service/glacier"
)

func main() {
	cfg, err := external.LoadDefaultAWSConfig()
	if err != nil {
		panic("failed to load config, " + err.Error())
	}

	svc := glacier.New(cfg)
	input := &glacier.ListTagsForVaultInput{
		AccountId: aws.String("-"),
		VaultName: aws.String("examplevault"),
	}

	req := svc.ListTagsForVaultRequest(input)
	result, err := req.Send()
	if err != nil {
		if aerr, ok := err.(awserr.Error); ok {
			switch aerr.Code() {
			case glacier.ErrCodeInvalidParameterValueException:
				fmt.Println(glacier.ErrCodeInvalidParameterValueException, aerr.Error())
			case glacier.ErrCodeMissingParameterValueException:
				fmt.Println(glacier.ErrCodeMissingParameterValueException, aerr.Error())
			case glacier.ErrCodeResourceNotFoundException:
				fmt.Println(glacier.ErrCodeResourceNotFoundException, aerr.Error())
			case glacier.ErrCodeServiceUnavailableException:
				fmt.Println(glacier.ErrCodeServiceUnavailableException, aerr.Error())
			default:
				fmt.Println(aerr.Error())
			}
		} else {
			// Print the error, cast err to awserr.Error to get the Code and
			// Message from an error.
			fmt.Println(err.Error())
		}
		return
	}

	fmt.Println(result)
}

Output:

func (*Glacier) ListVaultsRequest 

func (c *Glacier) ListVaultsRequest(input *ListVaultsInput) ListVaultsRequest

ListVaultsRequest returns a request value for making API operation for Amazon Glacier.

This operation lists all vaults owned by the calling user's account. The list returned in the response is ASCII-sorted by vault name.

By default, this operation returns up to 1,000 items. If there are more vaults to list, the response marker field contains the vault Amazon Resource Name (ARN) at which to continue the list with a new List Vaults request; otherwise, the marker field is null. To return a list of vaults that begins at a specific vault, set the marker request parameter to the vault ARN you obtained from a previous List Vaults request. You can also limit the number of vaults returned in the response by specifying the limit parameter in the request.

An AWS account has full permission to perform all operations (actions). However, AWS Identity and Access Management (IAM) users don't have any permissions by default. You must grant them explicit permission to perform specific actions. For more information, see Access Control Using AWS Identity and Access Management (IAM) (http://docs.aws.amazon.com/amazonglacier/latest/dev/using-iam-with-amazon-glacier.html).

For conceptual information and underlying REST API, see Retrieving Vault Metadata in Amazon Glacier (http://docs.aws.amazon.com/amazonglacier/latest/dev/retrieving-vault-info.html) and List Vaults (http://docs.aws.amazon.com/amazonglacier/latest/dev/api-vaults-get.html) in the Amazon Glacier Developer Guide. 

// Example sending a request using the ListVaultsRequest method.
req := client.ListVaultsRequest(params)
resp, err := req.Send()
if err == nil {
    fmt.Println(resp)
}
Example (Shared00)

To list all vaults owned by the calling user's account

The example lists all vaults owned by the specified AWS account. 

package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go-v2/aws"
	"github.com/aws/aws-sdk-go-v2/aws/awserr"
	"github.com/aws/aws-sdk-go-v2/aws/external"
	"github.com/aws/aws-sdk-go-v2/service/glacier"
)

func main() {
	cfg, err := external.LoadDefaultAWSConfig()
	if err != nil {
		panic("failed to load config, " + err.Error())
	}

	svc := glacier.New(cfg)
	input := &glacier.ListVaultsInput{
		AccountId: aws.String("-"),
		Limit:     aws.String(""),
		Marker:    aws.String(""),
	}

	req := svc.ListVaultsRequest(input)
	result, err := req.Send()
	if err != nil {
		if aerr, ok := err.(awserr.Error); ok {
			switch aerr.Code() {
			case glacier.ErrCodeResourceNotFoundException:
				fmt.Println(glacier.ErrCodeResourceNotFoundException, aerr.Error())
			case glacier.ErrCodeInvalidParameterValueException:
				fmt.Println(glacier.ErrCodeInvalidParameterValueException, aerr.Error())
			case glacier.ErrCodeMissingParameterValueException:
				fmt.Println(glacier.ErrCodeMissingParameterValueException, aerr.Error())
			case glacier.ErrCodeServiceUnavailableException:
				fmt.Println(glacier.ErrCodeServiceUnavailableException, aerr.Error())
			default:
				fmt.Println(aerr.Error())
			}
		} else {
			// Print the error, cast err to awserr.Error to get the Code and
			// Message from an error.
			fmt.Println(err.Error())
		}
		return
	}

	fmt.Println(result)
}

Output:

func (*Glacier) PurchaseProvisionedCapacityRequest 

func (c *Glacier) PurchaseProvisionedCapacityRequest(input *PurchaseProvisionedCapacityInput) PurchaseProvisionedCapacityRequest

PurchaseProvisionedCapacityRequest returns a request value for making API operation for Amazon Glacier.

This operation purchases a provisioned capacity unit for an AWS account. 

// Example sending a request using the PurchaseProvisionedCapacityRequest method.
req := client.PurchaseProvisionedCapacityRequest(params)
resp, err := req.Send()
if err == nil {
    fmt.Println(resp)
}
Example (Shared00)

To purchases a provisioned capacity unit for an AWS account

The example purchases provisioned capacity unit for an AWS account. 

package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go-v2/aws"
	"github.com/aws/aws-sdk-go-v2/aws/awserr"
	"github.com/aws/aws-sdk-go-v2/aws/external"
	"github.com/aws/aws-sdk-go-v2/service/glacier"
)

func main() {
	cfg, err := external.LoadDefaultAWSConfig()
	if err != nil {
		panic("failed to load config, " + err.Error())
	}

	svc := glacier.New(cfg)
	input := &glacier.PurchaseProvisionedCapacityInput{
		AccountId: aws.String("-"),
	}

	req := svc.PurchaseProvisionedCapacityRequest(input)
	result, err := req.Send()
	if err != nil {
		if aerr, ok := err.(awserr.Error); ok {
			switch aerr.Code() {
			case glacier.ErrCodeInvalidParameterValueException:
				fmt.Println(glacier.ErrCodeInvalidParameterValueException, aerr.Error())
			case glacier.ErrCodeMissingParameterValueException:
				fmt.Println(glacier.ErrCodeMissingParameterValueException, aerr.Error())
			case glacier.ErrCodeLimitExceededException:
				fmt.Println(glacier.ErrCodeLimitExceededException, aerr.Error())
			case glacier.ErrCodeServiceUnavailableException:
				fmt.Println(glacier.ErrCodeServiceUnavailableException, aerr.Error())
			default:
				fmt.Println(aerr.Error())
			}
		} else {
			// Print the error, cast err to awserr.Error to get the Code and
			// Message from an error.
			fmt.Println(err.Error())
		}
		return
	}

	fmt.Println(result)
}

Output:

func (*Glacier) RemoveTagsFromVaultRequest 

func (c *Glacier) RemoveTagsFromVaultRequest(input *RemoveTagsFromVaultInput) RemoveTagsFromVaultRequest

RemoveTagsFromVaultRequest returns a request value for making API operation for Amazon Glacier.

This operation removes one or more tags from the set of tags attached to a vault. For more information about tags, see Tagging Amazon Glacier Resources (http://docs.aws.amazon.com/amazonglacier/latest/dev/tagging.html). This operation is idempotent. The operation will be successful, even if there are no tags attached to the vault. 

// Example sending a request using the RemoveTagsFromVaultRequest method.
req := client.RemoveTagsFromVaultRequest(params)
resp, err := req.Send()
if err == nil {
    fmt.Println(resp)
}
Example (Shared00)

To remove tags from a vault

The example removes two tags from the vault named examplevault. 

package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go-v2/aws"
	"github.com/aws/aws-sdk-go-v2/aws/awserr"
	"github.com/aws/aws-sdk-go-v2/aws/external"
	"github.com/aws/aws-sdk-go-v2/service/glacier"
)

func main() {
	cfg, err := external.LoadDefaultAWSConfig()
	if err != nil {
		panic("failed to load config, " + err.Error())
	}

	svc := glacier.New(cfg)
	input := &glacier.RemoveTagsFromVaultInput{
		TagKeys: []string{
			"examplekey1",
			"examplekey2",
		},
		AccountId: aws.String("-"),
		VaultName: aws.String("examplevault"),
	}

	req := svc.RemoveTagsFromVaultRequest(input)
	result, err := req.Send()
	if err != nil {
		if aerr, ok := err.(awserr.Error); ok {
			switch aerr.Code() {
			case glacier.ErrCodeInvalidParameterValueException:
				fmt.Println(glacier.ErrCodeInvalidParameterValueException, aerr.Error())
			case glacier.ErrCodeMissingParameterValueException:
				fmt.Println(glacier.ErrCodeMissingParameterValueException, aerr.Error())
			case glacier.ErrCodeResourceNotFoundException:
				fmt.Println(glacier.ErrCodeResourceNotFoundException, aerr.Error())
			case glacier.ErrCodeServiceUnavailableException:
				fmt.Println(glacier.ErrCodeServiceUnavailableException, aerr.Error())
			default:
				fmt.Println(aerr.Error())
			}
		} else {
			// Print the error, cast err to awserr.Error to get the Code and
			// Message from an error.
			fmt.Println(err.Error())
		}
		return
	}

	fmt.Println(result)
}

Output:

func (*Glacier) SetDataRetrievalPolicyRequest 

func (c *Glacier) SetDataRetrievalPolicyRequest(input *SetDataRetrievalPolicyInput) SetDataRetrievalPolicyRequest

SetDataRetrievalPolicyRequest returns a request value for making API operation for Amazon Glacier.

This operation sets and then enacts a data retrieval policy in the region specified in the PUT request. You can set one policy per region for an AWS account. The policy is enacted within a few minutes of a successful PUT operation.

The set policy operation does not affect retrieval jobs that were in progress before the policy was enacted. For more information about data retrieval policies, see Amazon Glacier Data Retrieval Policies (http://docs.aws.amazon.com/amazonglacier/latest/dev/data-retrieval-policy.html). 

// Example sending a request using the SetDataRetrievalPolicyRequest method.
req := client.SetDataRetrievalPolicyRequest(params)
resp, err := req.Send()
if err == nil {
    fmt.Println(resp)
}
Example (Shared00)

To set and then enact a data retrieval policy

The example sets and then enacts a data retrieval policy. 

package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go-v2/aws"
	"github.com/aws/aws-sdk-go-v2/aws/awserr"
	"github.com/aws/aws-sdk-go-v2/aws/external"
	"github.com/aws/aws-sdk-go-v2/service/glacier"
)

func main() {
	cfg, err := external.LoadDefaultAWSConfig()
	if err != nil {
		panic("failed to load config, " + err.Error())
	}

	svc := glacier.New(cfg)
	input := &glacier.SetDataRetrievalPolicyInput{
		Policy: &glacier.DataRetrievalPolicy{
			Rules: []glacier.DataRetrievalRule{
				{
					BytesPerHour: aws.Int64(10737418240),
					Strategy:     aws.String("BytesPerHour"),
				},
			},
		},
		AccountId: aws.String("-"),
	}

	req := svc.SetDataRetrievalPolicyRequest(input)
	result, err := req.Send()
	if err != nil {
		if aerr, ok := err.(awserr.Error); ok {
			switch aerr.Code() {
			case glacier.ErrCodeInvalidParameterValueException:
				fmt.Println(glacier.ErrCodeInvalidParameterValueException, aerr.Error())
			case glacier.ErrCodeMissingParameterValueException:
				fmt.Println(glacier.ErrCodeMissingParameterValueException, aerr.Error())
			case glacier.ErrCodeServiceUnavailableException:
				fmt.Println(glacier.ErrCodeServiceUnavailableException, aerr.Error())
			default:
				fmt.Println(aerr.Error())
			}
		} else {
			// Print the error, cast err to awserr.Error to get the Code and
			// Message from an error.
			fmt.Println(err.Error())
		}
		return
	}

	fmt.Println(result)
}

Output:

func (*Glacier) SetVaultAccessPolicyRequest 

func (c *Glacier) SetVaultAccessPolicyRequest(input *SetVaultAccessPolicyInput) SetVaultAccessPolicyRequest

SetVaultAccessPolicyRequest returns a request value for making API operation for Amazon Glacier.

This operation configures an access policy for a vault and will overwrite an existing policy. To configure a vault access policy, send a PUT request to the access-policy subresource of the vault. An access policy is specific to a vault and is also called a vault subresource. You can set one access policy per vault and the policy can be up to 20 KB in size. For more information about vault access policies, see Amazon Glacier Access Control with Vault Access Policies (http://docs.aws.amazon.com/amazonglacier/latest/dev/vault-access-policy.html). 

// Example sending a request using the SetVaultAccessPolicyRequest method.
req := client.SetVaultAccessPolicyRequest(params)
resp, err := req.Send()
if err == nil {
    fmt.Println(resp)
}
Example (Shared00)

To set the access-policy on a vault

The example configures an access policy for the vault named examplevault. 

package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go-v2/aws"
	"github.com/aws/aws-sdk-go-v2/aws/awserr"
	"github.com/aws/aws-sdk-go-v2/aws/external"
	"github.com/aws/aws-sdk-go-v2/service/glacier"
)

func main() {
	cfg, err := external.LoadDefaultAWSConfig()
	if err != nil {
		panic("failed to load config, " + err.Error())
	}

	svc := glacier.New(cfg)
	input := &glacier.SetVaultAccessPolicyInput{
		AccountId: aws.String("-"),
		Policy: &glacier.VaultAccessPolicy{
			Policy: aws.String("{\"Version\":\"2012-10-17\",\"Statement\":[{\"Sid\":\"Define-owner-access-rights\",\"Effect\":\"Allow\",\"Principal\":{\"AWS\":\"arn:aws:iam::999999999999:root\"},\"Action\":\"glacier:DeleteArchive\",\"Resource\":\"arn:aws:glacier:us-west-2:999999999999:vaults/examplevault\"}]}"),
		},
		VaultName: aws.String("examplevault"),
	}

	req := svc.SetVaultAccessPolicyRequest(input)
	result, err := req.Send()
	if err != nil {
		if aerr, ok := err.(awserr.Error); ok {
			switch aerr.Code() {
			case glacier.ErrCodeResourceNotFoundException:
				fmt.Println(glacier.ErrCodeResourceNotFoundException, aerr.Error())
			case glacier.ErrCodeInvalidParameterValueException:
				fmt.Println(glacier.ErrCodeInvalidParameterValueException, aerr.Error())
			case glacier.ErrCodeMissingParameterValueException:
				fmt.Println(glacier.ErrCodeMissingParameterValueException, aerr.Error())
			case glacier.ErrCodeServiceUnavailableException:
				fmt.Println(glacier.ErrCodeServiceUnavailableException, aerr.Error())
			default:
				fmt.Println(aerr.Error())
			}
		} else {
			// Print the error, cast err to awserr.Error to get the Code and
			// Message from an error.
			fmt.Println(err.Error())
		}
		return
	}

	fmt.Println(result)
}

Output:

func (*Glacier) SetVaultNotificationsRequest 

func (c *Glacier) SetVaultNotificationsRequest(input *SetVaultNotificationsInput) SetVaultNotificationsRequest

SetVaultNotificationsRequest returns a request value for making API operation for Amazon Glacier.

This operation configures notifications that will be sent when specific events happen to a vault. By default, you don't get any notifications.

To configure vault notifications, send a PUT request to the notification-configuration subresource of the vault. The request should include a JSON document that provides an Amazon SNS topic and specific events for which you want Amazon Glacier to send notifications to the topic.

Amazon SNS topics must grant permission to the vault to be allowed to publish notifications to the topic. You can configure a vault to publish a notification for the following vault events:

  • ArchiveRetrievalCompleted This event occurs when a job that was initiated for an archive retrieval is completed (InitiateJob). The status of the completed job can be "Succeeded" or "Failed". The notification sent to the SNS topic is the same output as returned from DescribeJob.

  • InventoryRetrievalCompleted This event occurs when a job that was initiated for an inventory retrieval is completed (InitiateJob). The status of the completed job can be "Succeeded" or "Failed". The notification sent to the SNS topic is the same output as returned from DescribeJob.

An AWS account has full permission to perform all operations (actions). However, AWS Identity and Access Management (IAM) users don't have any permissions by default. You must grant them explicit permission to perform specific actions. For more information, see Access Control Using AWS Identity and Access Management (IAM) (http://docs.aws.amazon.com/amazonglacier/latest/dev/using-iam-with-amazon-glacier.html).

For conceptual information and underlying REST API, see Configuring Vault Notifications in Amazon Glacier (http://docs.aws.amazon.com/amazonglacier/latest/dev/configuring-notifications.html) and Set Vault Notification Configuration (http://docs.aws.amazon.com/amazonglacier/latest/dev/api-vault-notifications-put.html) in the Amazon Glacier Developer Guide. 

// Example sending a request using the SetVaultNotificationsRequest method.
req := client.SetVaultNotificationsRequest(params)
resp, err := req.Send()
if err == nil {
    fmt.Println(resp)
}
Example (Shared00)

To configure a vault to post a message to an Amazon SNS topic when jobs complete

The example sets the examplevault notification configuration. 

package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go-v2/aws"
	"github.com/aws/aws-sdk-go-v2/aws/awserr"
	"github.com/aws/aws-sdk-go-v2/aws/external"
	"github.com/aws/aws-sdk-go-v2/service/glacier"
)

func main() {
	cfg, err := external.LoadDefaultAWSConfig()
	if err != nil {
		panic("failed to load config, " + err.Error())
	}

	svc := glacier.New(cfg)
	input := &glacier.SetVaultNotificationsInput{
		AccountId: aws.String("-"),
		VaultName: aws.String("examplevault"),
		VaultNotificationConfig: &glacier.VaultNotificationConfig{
			Events: []string{
				"ArchiveRetrievalCompleted",
				"InventoryRetrievalCompleted",
			},
			SNSTopic: aws.String("arn:aws:sns:us-west-2:012345678901:mytopic"),
		},
	}

	req := svc.SetVaultNotificationsRequest(input)
	result, err := req.Send()
	if err != nil {
		if aerr, ok := err.(awserr.Error); ok {
			switch aerr.Code() {
			case glacier.ErrCodeResourceNotFoundException:
				fmt.Println(glacier.ErrCodeResourceNotFoundException, aerr.Error())
			case glacier.ErrCodeInvalidParameterValueException:
				fmt.Println(glacier.ErrCodeInvalidParameterValueException, aerr.Error())
			case glacier.ErrCodeMissingParameterValueException:
				fmt.Println(glacier.ErrCodeMissingParameterValueException, aerr.Error())
			case glacier.ErrCodeServiceUnavailableException:
				fmt.Println(glacier.ErrCodeServiceUnavailableException, aerr.Error())
			default:
				fmt.Println(aerr.Error())
			}
		} else {
			// Print the error, cast err to awserr.Error to get the Code and
			// Message from an error.
			fmt.Println(err.Error())
		}
		return
	}

	fmt.Println(result)
}

Output:

func (*Glacier) UploadArchiveRequest 

func (c *Glacier) UploadArchiveRequest(input *UploadArchiveInput) UploadArchiveRequest

UploadArchiveRequest returns a request value for making API operation for Amazon Glacier.

This operation adds an archive to a vault. This is a synchronous operation, and for a successful upload, your data is durably persisted. Amazon Glacier returns the archive ID in the x-amz-archive-id header of the response.

You must use the archive ID to access your data in Amazon Glacier. After you upload an archive, you should save the archive ID returned so that you can retrieve or delete the archive later. Besides saving the archive ID, you can also index it and give it a friendly name to allow for better searching. You can also use the optional archive description field to specify how the archive is referred to in an external index of archives, such as you might create in Amazon DynamoDB. You can also get the vault inventory to obtain a list of archive IDs in a vault. For more information, see InitiateJob.

You must provide a SHA256 tree hash of the data you are uploading. For information about computing a SHA256 tree hash, see Computing Checksums (http://docs.aws.amazon.com/amazonglacier/latest/dev/checksum-calculations.html).

You can optionally specify an archive description of up to 1,024 printable ASCII characters. You can get the archive description when you either retrieve the archive or get the vault inventory. For more information, see InitiateJob. Amazon Glacier does not interpret the description in any way. An archive description does not need to be unique. You cannot use the description to retrieve or sort the archive list.

Archives are immutable. After you upload an archive, you cannot edit the archive or its description.

An AWS account has full permission to perform all operations (actions). However, AWS Identity and Access Management (IAM) users don't have any permissions by default. You must grant them explicit permission to perform specific actions. For more information, see Access Control Using AWS Identity and Access Management (IAM) (http://docs.aws.amazon.com/amazonglacier/latest/dev/using-iam-with-amazon-glacier.html).

For conceptual information and underlying REST API, see Uploading an Archive in Amazon Glacier (http://docs.aws.amazon.com/amazonglacier/latest/dev/uploading-an-archive.html) and Upload Archive (http://docs.aws.amazon.com/amazonglacier/latest/dev/api-archive-post.html) in the Amazon Glacier Developer Guide. 

// Example sending a request using the UploadArchiveRequest method.
req := client.UploadArchiveRequest(params)
resp, err := req.Send()
if err == nil {
    fmt.Println(resp)
}
Example (Shared00)

To upload an archive

The example adds an archive to a vault. 

package main

import (
	"fmt"
	"strings"

	"github.com/aws/aws-sdk-go-v2/aws"
	"github.com/aws/aws-sdk-go-v2/aws/awserr"
	"github.com/aws/aws-sdk-go-v2/aws/external"
	"github.com/aws/aws-sdk-go-v2/service/glacier"
)

func main() {
	cfg, err := external.LoadDefaultAWSConfig()
	if err != nil {
		panic("failed to load config, " + err.Error())
	}

	svc := glacier.New(cfg)
	input := &glacier.UploadArchiveInput{
		AccountId:          aws.String("-"),
		ArchiveDescription: aws.String(""),
		Body:               aws.ReadSeekCloser(strings.NewReader("example-data-to-upload")),
		Checksum:           aws.String(""),
		VaultName:          aws.String("my-vault"),
	}

	req := svc.UploadArchiveRequest(input)
	result, err := req.Send()
	if err != nil {
		if aerr, ok := err.(awserr.Error); ok {
			switch aerr.Code() {
			case glacier.ErrCodeResourceNotFoundException:
				fmt.Println(glacier.ErrCodeResourceNotFoundException, aerr.Error())
			case glacier.ErrCodeInvalidParameterValueException:
				fmt.Println(glacier.ErrCodeInvalidParameterValueException, aerr.Error())
			case glacier.ErrCodeMissingParameterValueException:
				fmt.Println(glacier.ErrCodeMissingParameterValueException, aerr.Error())
			case glacier.ErrCodeRequestTimeoutException:
				fmt.Println(glacier.ErrCodeRequestTimeoutException, aerr.Error())
			case glacier.ErrCodeServiceUnavailableException:
				fmt.Println(glacier.ErrCodeServiceUnavailableException, aerr.Error())
			default:
				fmt.Println(aerr.Error())
			}
		} else {
			// Print the error, cast err to awserr.Error to get the Code and
			// Message from an error.
			fmt.Println(err.Error())
		}
		return
	}

	fmt.Println(result)
}

Output:

func (*Glacier) UploadMultipartPartRequest 

func (c *Glacier) UploadMultipartPartRequest(input *UploadMultipartPartInput) UploadMultipartPartRequest

UploadMultipartPartRequest returns a request value for making API operation for Amazon Glacier.

This operation uploads a part of an archive. You can upload archive parts in any order. You can also upload them in parallel. You can upload up to 10,000 parts for a multipart upload.

Amazon Glacier rejects your upload part request if any of the following conditions is true:

  • SHA256 tree hash does not matchTo ensure that part data is not corrupted in transmission, you compute a SHA256 tree hash of the part and include it in your request. Upon receiving the part data, Amazon Glacier also computes a SHA256 tree hash. If these hash values don't match, the operation fails. For information about computing a SHA256 tree hash, see Computing Checksums (http://docs.aws.amazon.com/amazonglacier/latest/dev/checksum-calculations.html).

  • Part size does not matchThe size of each part except the last must match the size specified in the corresponding InitiateMultipartUpload request. The size of the last part must be the same size as, or smaller than, the specified size.

If you upload a part whose size is smaller than the part size you specified 

in your initiate multipart upload request and that part is not the last
part, then the upload part request will succeed. However, the subsequent
Complete Multipart Upload request will fail.

* Range does not alignThe byte range value in the request does not align
with the part size specified in the corresponding initiate request. For
example, if you specify a part size of 4194304 bytes (4 MB), then 0 to
4194303 bytes (4 MB - 1) and 4194304 (4 MB) to 8388607 (8 MB - 1) are
valid part ranges. However, if you set a range value of 2 MB to 6 MB,
the range does not align with the part size and the upload will fail.

This operation is idempotent. If you upload the same part multiple times, the data included in the most recent request overwrites the previously uploaded data.

An AWS account has full permission to perform all operations (actions). However, AWS Identity and Access Management (IAM) users don't have any permissions by default. You must grant them explicit permission to perform specific actions. For more information, see Access Control Using AWS Identity and Access Management (IAM) (http://docs.aws.amazon.com/amazonglacier/latest/dev/using-iam-with-amazon-glacier.html).

For conceptual information and underlying REST API, see Uploading Large Archives in Parts (Multipart Upload) (http://docs.aws.amazon.com/amazonglacier/latest/dev/uploading-archive-mpu.html) and Upload Part (http://docs.aws.amazon.com/amazonglacier/latest/dev/api-upload-part.html) in the Amazon Glacier Developer Guide. 

// Example sending a request using the UploadMultipartPartRequest method.
req := client.UploadMultipartPartRequest(params)
resp, err := req.Send()
if err == nil {
    fmt.Println(resp)
}
Example (Shared00)

To upload the first part of an archive

The example uploads the first 1 MiB (1024 x 1024 bytes) part of an archive. 

package main

import (
	"fmt"
	"strings"

	"github.com/aws/aws-sdk-go-v2/aws"
	"github.com/aws/aws-sdk-go-v2/aws/awserr"
	"github.com/aws/aws-sdk-go-v2/aws/external"
	"github.com/aws/aws-sdk-go-v2/service/glacier"
)

func main() {
	cfg, err := external.LoadDefaultAWSConfig()
	if err != nil {
		panic("failed to load config, " + err.Error())
	}

	svc := glacier.New(cfg)
	input := &glacier.UploadMultipartPartInput{
		AccountId: aws.String("-"),
		Body:      aws.ReadSeekCloser(strings.NewReader("part1")),
		Checksum:  aws.String("c06f7cd4baacb087002a99a5f48bf953"),
		Range:     aws.String("bytes 0-1048575/*"),
		UploadId:  aws.String("19gaRezEXAMPLES6Ry5YYdqthHOC_kGRCT03L9yetr220UmPtBYKk-OssZtLqyFu7sY1_lR7vgFuJV6NtcV5zpsJ"),
		VaultName: aws.String("examplevault"),
	}

	req := svc.UploadMultipartPartRequest(input)
	result, err := req.Send()
	if err != nil {
		if aerr, ok := err.(awserr.Error); ok {
			switch aerr.Code() {
			case glacier.ErrCodeResourceNotFoundException:
				fmt.Println(glacier.ErrCodeResourceNotFoundException, aerr.Error())
			case glacier.ErrCodeInvalidParameterValueException:
				fmt.Println(glacier.ErrCodeInvalidParameterValueException, aerr.Error())
			case glacier.ErrCodeMissingParameterValueException:
				fmt.Println(glacier.ErrCodeMissingParameterValueException, aerr.Error())
			case glacier.ErrCodeRequestTimeoutException:
				fmt.Println(glacier.ErrCodeRequestTimeoutException, aerr.Error())
			case glacier.ErrCodeServiceUnavailableException:
				fmt.Println(glacier.ErrCodeServiceUnavailableException, aerr.Error())
			default:
				fmt.Println(aerr.Error())
			}
		} else {
			// Print the error, cast err to awserr.Error to get the Code and
			// Message from an error.
			fmt.Println(err.Error())
		}
		return
	}

	fmt.Println(result)
}

Output:

func (*Glacier) WaitUntilVaultExists 

func (c *Glacier) WaitUntilVaultExists(input *DescribeVaultInput) error

WaitUntilVaultExists uses the Amazon Glacier API operation DescribeVault to wait for a condition to be met before returning. If the condition is not met within the max attempt window, an error will be returned.

func (*Glacier) WaitUntilVaultExistsWithContext 

func (c *Glacier) WaitUntilVaultExistsWithContext(ctx aws.Context, input *DescribeVaultInput, opts ...aws.WaiterOption) error

WaitUntilVaultExistsWithContext is an extended version of WaitUntilVaultExists. With the support for passing in a context and options to configure the Waiter and the underlying request options.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*Glacier) WaitUntilVaultNotExists 

func (c *Glacier) WaitUntilVaultNotExists(input *DescribeVaultInput) error

WaitUntilVaultNotExists uses the Amazon Glacier API operation DescribeVault to wait for a condition to be met before returning. If the condition is not met within the max attempt window, an error will be returned.

func (*Glacier) WaitUntilVaultNotExistsWithContext 

func (c *Glacier) WaitUntilVaultNotExistsWithContext(ctx aws.Context, input *DescribeVaultInput, opts ...aws.WaiterOption) error

WaitUntilVaultNotExistsWithContext is an extended version of WaitUntilVaultNotExists. With the support for passing in a context and options to configure the Waiter and the underlying request options.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

type Grant 

type Grant struct {

	// The grantee.
	Grantee *Grantee `type:"structure"`

	// Specifies the permission given to the grantee.
	Permission Permission `type:"string" enum:"true"`
	// contains filtered or unexported fields
}

Contains information about a grant.

func (Grant) GoString 

func (s Grant) GoString() string

GoString returns the string representation

func (Grant) MarshalFields 

func (s Grant) MarshalFields(e protocol.FieldEncoder) error

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (Grant) String 

func (s Grant) String() string

String returns the string representation

func (*Grant) Validate 

func (s *Grant) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type Grantee 

type Grantee struct {

	// Screen name of the grantee.
	DisplayName *string `type:"string"`

	// Email address of the grantee.
	EmailAddress *string `type:"string"`

	// The canonical user ID of the grantee.
	ID *string `type:"string"`

	// Type of grantee
	//
	// Type is a required field
	Type Type `type:"string" required:"true" enum:"true"`

	// URI of the grantee group.
	URI *string `type:"string"`
	// contains filtered or unexported fields
}

Contains information about the grantee.

func (Grantee) GoString 

func (s Grantee) GoString() string

GoString returns the string representation

func (Grantee) MarshalFields 

func (s Grantee) MarshalFields(e protocol.FieldEncoder) error

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (Grantee) String 

func (s Grantee) String() string

String returns the string representation

func (*Grantee) Validate 

func (s *Grantee) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type Hash 

type Hash struct {
	TreeHash   []byte
	LinearHash []byte
}

Hash contains information about the tree-hash and linear hash of a Glacier payload. This structure is generated by ComputeHashes().

func ComputeHashes 

func ComputeHashes(r io.ReadSeeker) Hash

ComputeHashes computes the tree-hash and linear hash of a seekable reader r.

See http://docs.aws.amazon.com/amazonglacier/latest/dev/checksum-calculations.html for more information.

Example 
package main

import (
	"bytes"
	"fmt"
	"io"

	"github.com/aws/aws-sdk-go-v2/service/glacier"
)

func main() {
	r := testCreateReader()

	h := glacier.ComputeHashes(r)
	n, _ := r.Seek(0, 1) // Check position after checksumming

	fmt.Printf("linear: %x\n", h.LinearHash)
	fmt.Printf("tree: %x\n", h.TreeHash)
	fmt.Printf("pos: %d\n", n)

}

func testCreateReader() io.ReadSeeker {
	buf := make([]byte, 5767168)
	for i := range buf {
		buf[i] = '0'
	}

	return bytes.NewReader(buf)
}

Output:

linear: 68aff0c5a91aa0491752bfb96e3fef33eb74953804f6a2f7b708d5bcefa8ff6b
tree: 154e26c78fd74d0c2c9b3cc4644191619dc4f2cd539ae2a74d5fd07957a3ee6a
pos: 0

type InitiateJobInput 

type InitiateJobInput struct {

	// The AccountId value is the AWS account ID of the account that owns the vault.
	// You can either specify an AWS account ID or optionally a single '-' (hyphen),
	// in which case Amazon Glacier uses the AWS account ID associated with the
	// credentials used to sign the request. If you use an account ID, do not include
	// any hyphens ('-') in the ID.
	//
	// AccountId is a required field
	AccountId *string `location:"uri" locationName:"accountId" type:"string" required:"true"`

	// Provides options for specifying job information.
	JobParameters *JobParameters `locationName:"jobParameters" type:"structure"`

	// The name of the vault.
	//
	// VaultName is a required field
	VaultName *string `location:"uri" locationName:"vaultName" type:"string" required:"true"`
	// contains filtered or unexported fields
}

Provides options for initiating an Amazon Glacier job.

func (InitiateJobInput) GoString 

func (s InitiateJobInput) GoString() string

GoString returns the string representation

func (InitiateJobInput) MarshalFields 

func (s InitiateJobInput) MarshalFields(e protocol.FieldEncoder) error

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (InitiateJobInput) String 

func (s InitiateJobInput) String() string

String returns the string representation

func (*InitiateJobInput) Validate 

func (s *InitiateJobInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type InitiateJobOutput 

type InitiateJobOutput struct {

	// The ID of the job.
	JobId *string `location:"header" locationName:"x-amz-job-id" type:"string"`

	// The path to the location of where the select results are stored.
	JobOutputPath *string `location:"header" locationName:"x-amz-job-output-path" type:"string"`

	// The relative URI path of the job.
	Location *string `location:"header" locationName:"Location" type:"string"`
	// contains filtered or unexported fields
}

Contains the Amazon Glacier response to your request.

func (InitiateJobOutput) GoString 

func (s InitiateJobOutput) GoString() string

GoString returns the string representation

func (InitiateJobOutput) MarshalFields 

func (s InitiateJobOutput) MarshalFields(e protocol.FieldEncoder) error

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (InitiateJobOutput) SDKResponseMetadata 

func (s InitiateJobOutput) SDKResponseMetadata() aws.Response

SDKResponseMetdata return sthe response metadata for the API.

func (InitiateJobOutput) String 

func (s InitiateJobOutput) String() string

String returns the string representation

type InitiateJobRequest 

type InitiateJobRequest struct {
	*aws.Request
	Input *InitiateJobInput
	Copy  func(*InitiateJobInput) InitiateJobRequest
}

InitiateJobRequest is a API request type for the InitiateJob API operation.

func (InitiateJobRequest) Send 

func (r InitiateJobRequest) Send() (*InitiateJobOutput, error)

Send marshals and sends the InitiateJob API request.

type InitiateMultipartUploadInput 

type InitiateMultipartUploadInput struct {

	// The AccountId value is the AWS account ID of the account that owns the vault.
	// You can either specify an AWS account ID or optionally a single '-' (hyphen),
	// in which case Amazon Glacier uses the AWS account ID associated with the
	// credentials used to sign the request. If you use an account ID, do not include
	// any hyphens ('-') in the ID.
	//
	// AccountId is a required field
	AccountId *string `location:"uri" locationName:"accountId" type:"string" required:"true"`

	// The archive description that you are uploading in parts.
	//
	// The part size must be a megabyte (1024 KB) multiplied by a power of 2, for
	// example 1048576 (1 MB), 2097152 (2 MB), 4194304 (4 MB), 8388608 (8 MB), and
	// so on. The minimum allowable part size is 1 MB, and the maximum is 4 GB (4096
	// MB).
	ArchiveDescription *string `location:"header" locationName:"x-amz-archive-description" type:"string"`

	// The size of each part except the last, in bytes. The last part can be smaller
	// than this part size.
	PartSize *string `location:"header" locationName:"x-amz-part-size" type:"string"`

	// The name of the vault.
	//
	// VaultName is a required field
	VaultName *string `location:"uri" locationName:"vaultName" type:"string" required:"true"`
	// contains filtered or unexported fields
}

Provides options for initiating a multipart upload to an Amazon Glacier vault.

func (InitiateMultipartUploadInput) GoString 

func (s InitiateMultipartUploadInput) GoString() string

GoString returns the string representation

func (InitiateMultipartUploadInput) MarshalFields 

func (s InitiateMultipartUploadInput) MarshalFields(e protocol.FieldEncoder) error

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (InitiateMultipartUploadInput) String 

func (s InitiateMultipartUploadInput) String() string

String returns the string representation

func (*InitiateMultipartUploadInput) Validate 

func (s *InitiateMultipartUploadInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type InitiateMultipartUploadOutput 

type InitiateMultipartUploadOutput struct {

	// The relative URI path of the multipart upload ID Amazon Glacier created.
	Location *string `location:"header" locationName:"Location" type:"string"`

	// The ID of the multipart upload. This value is also included as part of the
	// location.
	UploadId *string `location:"header" locationName:"x-amz-multipart-upload-id" type:"string"`
	// contains filtered or unexported fields
}

The Amazon Glacier response to your request.

func (InitiateMultipartUploadOutput) GoString 

func (s InitiateMultipartUploadOutput) GoString() string

GoString returns the string representation

func (InitiateMultipartUploadOutput) MarshalFields 

func (s InitiateMultipartUploadOutput) MarshalFields(e protocol.FieldEncoder) error

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (InitiateMultipartUploadOutput) SDKResponseMetadata 

func (s InitiateMultipartUploadOutput) SDKResponseMetadata() aws.Response

SDKResponseMetdata return sthe response metadata for the API.

func (InitiateMultipartUploadOutput) String 

func (s InitiateMultipartUploadOutput) String() string

String returns the string representation

type InitiateMultipartUploadRequest 

type InitiateMultipartUploadRequest struct {
	*aws.Request
	Input *InitiateMultipartUploadInput
	Copy  func(*InitiateMultipartUploadInput) InitiateMultipartUploadRequest
}

InitiateMultipartUploadRequest is a API request type for the InitiateMultipartUpload API operation.

func (InitiateMultipartUploadRequest) Send 

func (r InitiateMultipartUploadRequest) Send() (*InitiateMultipartUploadOutput, error)

Send marshals and sends the InitiateMultipartUpload API request.

type InitiateVaultLockInput 

type InitiateVaultLockInput struct {

	// The AccountId value is the AWS account ID. This value must match the AWS
	// account ID associated with the credentials used to sign the request. You
	// can either specify an AWS account ID or optionally a single '-' (hyphen),
	// in which case Amazon Glacier uses the AWS account ID associated with the
	// credentials used to sign the request. If you specify your account ID, do
	// not include any hyphens ('-') in the ID.
	//
	// AccountId is a required field
	AccountId *string `location:"uri" locationName:"accountId" type:"string" required:"true"`

	// The vault lock policy as a JSON string, which uses "\" as an escape character.
	Policy *VaultLockPolicy `locationName:"policy" type:"structure"`

	// The name of the vault.
	//
	// VaultName is a required field
	VaultName *string `location:"uri" locationName:"vaultName" type:"string" required:"true"`
	// contains filtered or unexported fields
}

The input values for InitiateVaultLock.

func (InitiateVaultLockInput) GoString 

func (s InitiateVaultLockInput) GoString() string

GoString returns the string representation

func (InitiateVaultLockInput) MarshalFields 

func (s InitiateVaultLockInput) MarshalFields(e protocol.FieldEncoder) error

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (InitiateVaultLockInput) String 

func (s InitiateVaultLockInput) String() string

String returns the string representation

func (*InitiateVaultLockInput) Validate 

func (s *InitiateVaultLockInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type InitiateVaultLockOutput 

type InitiateVaultLockOutput struct {

	// The lock ID, which is used to complete the vault locking process.
	LockId *string `location:"header" locationName:"x-amz-lock-id" type:"string"`
	// contains filtered or unexported fields
}

Contains the Amazon Glacier response to your request.

func (InitiateVaultLockOutput) GoString 

func (s InitiateVaultLockOutput) GoString() string

GoString returns the string representation

func (InitiateVaultLockOutput) MarshalFields 

func (s InitiateVaultLockOutput) MarshalFields(e protocol.FieldEncoder) error

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (InitiateVaultLockOutput) SDKResponseMetadata 

func (s InitiateVaultLockOutput) SDKResponseMetadata() aws.Response

SDKResponseMetdata return sthe response metadata for the API.

func (InitiateVaultLockOutput) String 

func (s InitiateVaultLockOutput) String() string

String returns the string representation

type InitiateVaultLockRequest 

type InitiateVaultLockRequest struct {
	*aws.Request
	Input *InitiateVaultLockInput
	Copy  func(*InitiateVaultLockInput) InitiateVaultLockRequest
}

InitiateVaultLockRequest is a API request type for the InitiateVaultLock API operation.

func (InitiateVaultLockRequest) Send 

func (r InitiateVaultLockRequest) Send() (*InitiateVaultLockOutput, error)

Send marshals and sends the InitiateVaultLock API request.

type InputSerialization 

type InputSerialization struct {

	// Describes the serialization of a CSV-encoded object.
	Csv *CSVInput `locationName:"csv" type:"structure"`
	// contains filtered or unexported fields
}

Describes how the archive is serialized.

func (InputSerialization) GoString 

func (s InputSerialization) GoString() string

GoString returns the string representation

func (InputSerialization) MarshalFields 

func (s InputSerialization) MarshalFields(e protocol.FieldEncoder) error

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (InputSerialization) String 

func (s InputSerialization) String() string

String returns the string representation

type InventoryRetrievalJobDescription 

type InventoryRetrievalJobDescription struct {

	// The end of the date range in UTC for vault inventory retrieval that includes
	// archives created before this date. This value should be a string in the ISO
	// 8601 date format, for example 2013-03-20T17:03:43Z.
	EndDate *string `type:"string"`

	// The output format for the vault inventory list, which is set by the InitiateJob
	// request when initiating a job to retrieve a vault inventory. Valid values
	// are CSV and JSON.
	Format *string `type:"string"`

	// The maximum number of inventory items returned per vault inventory retrieval
	// request. This limit is set when initiating the job with the a InitiateJob
	// request.
	Limit *string `type:"string"`

	// An opaque string that represents where to continue pagination of the vault
	// inventory retrieval results. You use the marker in a new InitiateJob request
	// to obtain additional inventory items. If there are no more inventory items,
	// this value is null. For more information, see  Range Inventory Retrieval
	// (http://docs.aws.amazon.com/amazonglacier/latest/dev/api-initiate-job-post.html#api-initiate-job-post-vault-inventory-list-filtering).
	Marker *string `type:"string"`

	// The start of the date range in Universal Coordinated Time (UTC) for vault
	// inventory retrieval that includes archives created on or after this date.
	// This value should be a string in the ISO 8601 date format, for example 2013-03-20T17:03:43Z.
	StartDate *string `type:"string"`
	// contains filtered or unexported fields
}

Describes the options for a range inventory retrieval job.

func (InventoryRetrievalJobDescription) GoString 

func (s InventoryRetrievalJobDescription) GoString() string

GoString returns the string representation

func (InventoryRetrievalJobDescription) MarshalFields 

func (s InventoryRetrievalJobDescription) MarshalFields(e protocol.FieldEncoder) error

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (InventoryRetrievalJobDescription) String 

func (s InventoryRetrievalJobDescription) String() string

String returns the string representation

type InventoryRetrievalJobInput 

type InventoryRetrievalJobInput struct {

	// The end of the date range in UTC for vault inventory retrieval that includes
	// archives created before this date. This value should be a string in the ISO
	// 8601 date format, for example 2013-03-20T17:03:43Z.
	EndDate *string `type:"string"`

	// Specifies the maximum number of inventory items returned per vault inventory
	// retrieval request. Valid values are greater than or equal to 1.
	Limit *string `type:"string"`

	// An opaque string that represents where to continue pagination of the vault
	// inventory retrieval results. You use the marker in a new InitiateJob request
	// to obtain additional inventory items. If there are no more inventory items,
	// this value is null.
	Marker *string `type:"string"`

	// The start of the date range in UTC for vault inventory retrieval that includes
	// archives created on or after this date. This value should be a string in
	// the ISO 8601 date format, for example 2013-03-20T17:03:43Z.
	StartDate *string `type:"string"`
	// contains filtered or unexported fields
}

Provides options for specifying a range inventory retrieval job.

func (InventoryRetrievalJobInput) GoString 

func (s InventoryRetrievalJobInput) GoString() string

GoString returns the string representation

func (InventoryRetrievalJobInput) MarshalFields 

func (s InventoryRetrievalJobInput) MarshalFields(e protocol.FieldEncoder) error

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (InventoryRetrievalJobInput) String 

func (s InventoryRetrievalJobInput) String() string

String returns the string representation

type JobParameters 

type JobParameters struct {

	// The ID of the archive that you want to retrieve. This field is required only
	// if Type is set to select or archive-retrievalcode>. An error occurs if you
	// specify this request parameter for an inventory retrieval job request.
	ArchiveId *string `type:"string"`

	// The optional description for the job. The description must be less than or
	// equal to 1,024 bytes. The allowable characters are 7-bit ASCII without control
	// codes-specifically, ASCII values 32-126 decimal or 0x20-0x7E hexadecimal.
	Description *string `type:"string"`

	// When initiating a job to retrieve a vault inventory, you can optionally add
	// this parameter to your request to specify the output format. If you are initiating
	// an inventory job and do not specify a Format field, JSON is the default format.
	// Valid values are "CSV" and "JSON".
	Format *string `type:"string"`

	// Input parameters used for range inventory retrieval.
	InventoryRetrievalParameters *InventoryRetrievalJobInput `type:"structure"`

	// Contains information about the location where the select job results are
	// stored.
	OutputLocation *OutputLocation `type:"structure"`

	// The byte range to retrieve for an archive retrieval. in the form "StartByteValue-EndByteValue"
	// If not specified, the whole archive is retrieved. If specified, the byte
	// range must be megabyte (1024*1024) aligned which means that StartByteValue
	// must be divisible by 1 MB and EndByteValue plus 1 must be divisible by 1
	// MB or be the end of the archive specified as the archive byte size value
	// minus 1. If RetrievalByteRange is not megabyte aligned, this operation returns
	// a 400 response.
	//
	// An error occurs if you specify this field for an inventory retrieval job
	// request.
	RetrievalByteRange *string `type:"string"`

	// The Amazon SNS topic ARN to which Amazon Glacier sends a notification when
	// the job is completed and the output is ready for you to download. The specified
	// topic publishes the notification to its subscribers. The SNS topic must exist.
	SNSTopic *string `type:"string"`

	// Contains the parameters that define a job.
	SelectParameters *SelectParameters `type:"structure"`

	// The tier to use for a select or an archive retrieval job. Valid values are
	// Expedited, Standard, or Bulk. Standard is the default.
	Tier *string `type:"string"`

	// The job type. You can initiate a job to perform a select query on an archive,
	// retrieve an archive, or get an inventory of a vault. Valid values are "select",
	// "archive-retrieval" and "inventory-retrieval".
	Type *string `type:"string"`
	// contains filtered or unexported fields
}

Provides options for defining a job.

func (JobParameters) GoString 

func (s JobParameters) GoString() string

GoString returns the string representation

func (JobParameters) MarshalFields 

func (s JobParameters) MarshalFields(e protocol.FieldEncoder) error

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (JobParameters) String 

func (s JobParameters) String() string

String returns the string representation

func (*JobParameters) Validate 

func (s *JobParameters) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type ListJobsInput 

type ListJobsInput struct {

	// The AccountId value is the AWS account ID of the account that owns the vault.
	// You can either specify an AWS account ID or optionally a single '-' (hyphen),
	// in which case Amazon Glacier uses the AWS account ID associated with the
	// credentials used to sign the request. If you use an account ID, do not include
	// any hyphens ('-') in the ID.
	//
	// AccountId is a required field
	AccountId *string `location:"uri" locationName:"accountId" type:"string" required:"true"`

	// The state of the jobs to return. You can specify true or false.
	Completed *string `location:"querystring" locationName:"completed" type:"string"`

	// The maximum number of jobs to be returned. The default limit is 1000. The
	// number of jobs returned might be fewer than the specified limit, but the
	// number of returned jobs never exceeds the limit.
	Limit *string `location:"querystring" locationName:"limit" type:"string"`

	// An opaque string used for pagination. This value specifies the job at which
	// the listing of jobs should begin. Get the marker value from a previous List
	// Jobs response. You only need to include the marker if you are continuing
	// the pagination of results started in a previous List Jobs request.
	Marker *string `location:"querystring" locationName:"marker" type:"string"`

	// The type of job status to return. You can specify the following values: InProgress,
	// Succeeded, or Failed.
	Statuscode *string `location:"querystring" locationName:"statuscode" type:"string"`

	// The name of the vault.
	//
	// VaultName is a required field
	VaultName *string `location:"uri" locationName:"vaultName" type:"string" required:"true"`
	// contains filtered or unexported fields
}

Provides options for retrieving a job list for an Amazon Glacier vault.

func (ListJobsInput) GoString 

func (s ListJobsInput) GoString() string

GoString returns the string representation

func (ListJobsInput) MarshalFields 

func (s ListJobsInput) MarshalFields(e protocol.FieldEncoder) error

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (ListJobsInput) String 

func (s ListJobsInput) String() string

String returns the string representation

func (*ListJobsInput) Validate 

func (s *ListJobsInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type ListJobsOutput 

type ListJobsOutput struct {

	// A list of job objects. Each job object contains metadata describing the job.
	JobList []DescribeJobOutput `type:"list"`

	// An opaque string used for pagination that specifies the job at which the
	// listing of jobs should begin. You get the marker value from a previous List
	// Jobs response. You only need to include the marker if you are continuing
	// the pagination of the results started in a previous List Jobs request.
	Marker *string `type:"string"`
	// contains filtered or unexported fields
}

Contains the Amazon Glacier response to your request.

func (ListJobsOutput) GoString 

func (s ListJobsOutput) GoString() string

GoString returns the string representation

func (ListJobsOutput) MarshalFields 

func (s ListJobsOutput) MarshalFields(e protocol.FieldEncoder) error

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (ListJobsOutput) SDKResponseMetadata 

func (s ListJobsOutput) SDKResponseMetadata() aws.Response

SDKResponseMetdata return sthe response metadata for the API.

func (ListJobsOutput) String 

func (s ListJobsOutput) String() string

String returns the string representation

type ListJobsPager 

type ListJobsPager struct {
	aws.Pager
}

ListJobsPager is used to paginate the request. This can be done by calling Next and CurrentPage.

func (*ListJobsPager) CurrentPage 

func (p *ListJobsPager) CurrentPage() *ListJobsOutput

type ListJobsRequest 

type ListJobsRequest struct {
	*aws.Request
	Input *ListJobsInput
	Copy  func(*ListJobsInput) ListJobsRequest
}

ListJobsRequest is a API request type for the ListJobs API operation.

func (*ListJobsRequest) Paginate 

func (p *ListJobsRequest) Paginate(opts ...aws.Option) ListJobsPager

Paginate pages iterates over the pages of a ListJobsRequest operation, calling the Next method for each page. Using the paginators Next method will depict whether or not there are more pages.

Note: This operation can generate multiple requests to a service. 

   // Example iterating over at most 3 pages of a ListJobs operation.
		req := client.ListJobsRequest(input)
		p := req.Paginate()
		for p.Next() {
			page := p.CurrentPage()
		}

		if err := p.Err(); err != nil {
			return err
		}

func (ListJobsRequest) Send 

func (r ListJobsRequest) Send() (*ListJobsOutput, error)

Send marshals and sends the ListJobs API request.

type ListMultipartUploadsInput 

type ListMultipartUploadsInput struct {

	// The AccountId value is the AWS account ID of the account that owns the vault.
	// You can either specify an AWS account ID or optionally a single '-' (hyphen),
	// in which case Amazon Glacier uses the AWS account ID associated with the
	// credentials used to sign the request. If you use an account ID, do not include
	// any hyphens ('-') in the ID.
	//
	// AccountId is a required field
	AccountId *string `location:"uri" locationName:"accountId" type:"string" required:"true"`

	// Specifies the maximum number of uploads returned in the response body. If
	// this value is not specified, the List Uploads operation returns up to 1,000
	// uploads.
	Limit *string `location:"querystring" locationName:"limit" type:"string"`

	// An opaque string used for pagination. This value specifies the upload at
	// which the listing of uploads should begin. Get the marker value from a previous
	// List Uploads response. You need only include the marker if you are continuing
	// the pagination of results started in a previous List Uploads request.
	Marker *string `location:"querystring" locationName:"marker" type:"string"`

	// The name of the vault.
	//
	// VaultName is a required field
	VaultName *string `location:"uri" locationName:"vaultName" type:"string" required:"true"`
	// contains filtered or unexported fields
}

Provides options for retrieving list of in-progress multipart uploads for an Amazon Glacier vault.

func (ListMultipartUploadsInput) GoString 

func (s ListMultipartUploadsInput) GoString() string

GoString returns the string representation

func (ListMultipartUploadsInput) MarshalFields 

func (s ListMultipartUploadsInput) MarshalFields(e protocol.FieldEncoder) error

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (ListMultipartUploadsInput) String 

func (s ListMultipartUploadsInput) String() string

String returns the string representation

func (*ListMultipartUploadsInput) Validate 

func (s *ListMultipartUploadsInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type ListMultipartUploadsOutput 

type ListMultipartUploadsOutput struct {

	// An opaque string that represents where to continue pagination of the results.
	// You use the marker in a new List Multipart Uploads request to obtain more
	// uploads in the list. If there are no more uploads, this value is null.
	Marker *string `type:"string"`

	// A list of in-progress multipart uploads.
	UploadsList []UploadListElement `type:"list"`
	// contains filtered or unexported fields
}

Contains the Amazon Glacier response to your request.

func (ListMultipartUploadsOutput) GoString 

func (s ListMultipartUploadsOutput) GoString() string

GoString returns the string representation

func (ListMultipartUploadsOutput) MarshalFields 

func (s ListMultipartUploadsOutput) MarshalFields(e protocol.FieldEncoder) error

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (ListMultipartUploadsOutput) SDKResponseMetadata 

func (s ListMultipartUploadsOutput) SDKResponseMetadata() aws.Response

SDKResponseMetdata return sthe response metadata for the API.

func (ListMultipartUploadsOutput) String 

func (s ListMultipartUploadsOutput) String() string

String returns the string representation

type ListMultipartUploadsPager 

type ListMultipartUploadsPager struct {
	aws.Pager
}

ListMultipartUploadsPager is used to paginate the request. This can be done by calling Next and CurrentPage.

func (*ListMultipartUploadsPager) CurrentPage 

func (p *ListMultipartUploadsPager) CurrentPage() *ListMultipartUploadsOutput

type ListMultipartUploadsRequest 

type ListMultipartUploadsRequest struct {
	*aws.Request
	Input *ListMultipartUploadsInput
	Copy  func(*ListMultipartUploadsInput) ListMultipartUploadsRequest
}

ListMultipartUploadsRequest is a API request type for the ListMultipartUploads API operation.

func (*ListMultipartUploadsRequest) Paginate 

func (p *ListMultipartUploadsRequest) Paginate(opts ...aws.Option) ListMultipartUploadsPager

Paginate pages iterates over the pages of a ListMultipartUploadsRequest operation, calling the Next method for each page. Using the paginators Next method will depict whether or not there are more pages.

Note: This operation can generate multiple requests to a service. 

   // Example iterating over at most 3 pages of a ListMultipartUploads operation.
		req := client.ListMultipartUploadsRequest(input)
		p := req.Paginate()
		for p.Next() {
			page := p.CurrentPage()
		}

		if err := p.Err(); err != nil {
			return err
		}

func (ListMultipartUploadsRequest) Send 

func (r ListMultipartUploadsRequest) Send() (*ListMultipartUploadsOutput, error)

Send marshals and sends the ListMultipartUploads API request.

type ListPartsInput 

type ListPartsInput struct {

	// The AccountId value is the AWS account ID of the account that owns the vault.
	// You can either specify an AWS account ID or optionally a single '-' (hyphen),
	// in which case Amazon Glacier uses the AWS account ID associated with the
	// credentials used to sign the request. If you use an account ID, do not include
	// any hyphens ('-') in the ID.
	//
	// AccountId is a required field
	AccountId *string `location:"uri" locationName:"accountId" type:"string" required:"true"`

	// The maximum number of parts to be returned. The default limit is 1000. The
	// number of parts returned might be fewer than the specified limit, but the
	// number of returned parts never exceeds the limit.
	Limit *string `location:"querystring" locationName:"limit" type:"string"`

	// An opaque string used for pagination. This value specifies the part at which
	// the listing of parts should begin. Get the marker value from the response
	// of a previous List Parts response. You need only include the marker if you
	// are continuing the pagination of results started in a previous List Parts
	// request.
	Marker *string `location:"querystring" locationName:"marker" type:"string"`

	// The upload ID of the multipart upload.
	//
	// UploadId is a required field
	UploadId *string `location:"uri" locationName:"uploadId" type:"string" required:"true"`

	// The name of the vault.
	//
	// VaultName is a required field
	VaultName *string `location:"uri" locationName:"vaultName" type:"string" required:"true"`
	// contains filtered or unexported fields
}

Provides options for retrieving a list of parts of an archive that have been uploaded in a specific multipart upload.

func (ListPartsInput) GoString 

func (s ListPartsInput) GoString() string

GoString returns the string representation

func (ListPartsInput) MarshalFields 

func (s ListPartsInput) MarshalFields(e protocol.FieldEncoder) error

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (ListPartsInput) String 

func (s ListPartsInput) String() string

String returns the string representation

func (*ListPartsInput) Validate 

func (s *ListPartsInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type ListPartsOutput 

type ListPartsOutput struct {

	// The description of the archive that was specified in the Initiate Multipart
	// Upload request.
	ArchiveDescription *string `type:"string"`

	// The UTC time at which the multipart upload was initiated.
	CreationDate *string `type:"string"`

	// An opaque string that represents where to continue pagination of the results.
	// You use the marker in a new List Parts request to obtain more jobs in the
	// list. If there are no more parts, this value is null.
	Marker *string `type:"string"`

	// The ID of the upload to which the parts are associated.
	MultipartUploadId *string `type:"string"`

	// The part size in bytes. This is the same value that you specified in the
	// Initiate Multipart Upload request.
	PartSizeInBytes *int64 `type:"long"`

	// A list of the part sizes of the multipart upload. Each object in the array
	// contains a RangeBytes and sha256-tree-hash name/value pair.
	Parts []PartListElement `type:"list"`

	// The Amazon Resource Name (ARN) of the vault to which the multipart upload
	// was initiated.
	VaultARN *string `type:"string"`
	// contains filtered or unexported fields
}

Contains the Amazon Glacier response to your request.

func (ListPartsOutput) GoString 

func (s ListPartsOutput) GoString() string

GoString returns the string representation

func (ListPartsOutput) MarshalFields 

func (s ListPartsOutput) MarshalFields(e protocol.FieldEncoder) error

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (ListPartsOutput) SDKResponseMetadata 

func (s ListPartsOutput) SDKResponseMetadata() aws.Response

SDKResponseMetdata return sthe response metadata for the API.

func (ListPartsOutput) String 

func (s ListPartsOutput) String() string

String returns the string representation

type ListPartsPager 

type ListPartsPager struct {
	aws.Pager
}

ListPartsPager is used to paginate the request. This can be done by calling Next and CurrentPage.

func (*ListPartsPager) CurrentPage 

func (p *ListPartsPager) CurrentPage() *ListPartsOutput

type ListPartsRequest 

type ListPartsRequest struct {
	*aws.Request
	Input *ListPartsInput
	Copy  func(*ListPartsInput) ListPartsRequest
}

ListPartsRequest is a API request type for the ListParts API operation.

func (*ListPartsRequest) Paginate 

func (p *ListPartsRequest) Paginate(opts ...aws.Option) ListPartsPager

Paginate pages iterates over the pages of a ListPartsRequest operation, calling the Next method for each page. Using the paginators Next method will depict whether or not there are more pages.

Note: This operation can generate multiple requests to a service. 

   // Example iterating over at most 3 pages of a ListParts operation.
		req := client.ListPartsRequest(input)
		p := req.Paginate()
		for p.Next() {
			page := p.CurrentPage()
		}

		if err := p.Err(); err != nil {
			return err
		}

func (ListPartsRequest) Send 

func (r ListPartsRequest) Send() (*ListPartsOutput, error)

Send marshals and sends the ListParts API request.

type ListProvisionedCapacityInput 

type ListProvisionedCapacityInput struct {

	// The AWS account ID of the account that owns the vault. You can either specify
	// an AWS account ID or optionally a single '-' (hyphen), in which case Amazon
	// Glacier uses the AWS account ID associated with the credentials used to sign
	// the request. If you use an account ID, don't include any hyphens ('-') in
	// the ID.
	//
	// AccountId is a required field
	AccountId *string `location:"uri" locationName:"accountId" type:"string" required:"true"`
	// contains filtered or unexported fields
}

func (ListProvisionedCapacityInput) GoString 

func (s ListProvisionedCapacityInput) GoString() string

GoString returns the string representation

func (ListProvisionedCapacityInput) MarshalFields 

func (s ListProvisionedCapacityInput) MarshalFields(e protocol.FieldEncoder) error

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (ListProvisionedCapacityInput) String 

func (s ListProvisionedCapacityInput) String() string

String returns the string representation

func (*ListProvisionedCapacityInput) Validate 

func (s *ListProvisionedCapacityInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type ListProvisionedCapacityOutput 

type ListProvisionedCapacityOutput struct {

	// The response body contains the following JSON fields.
	ProvisionedCapacityList []ProvisionedCapacityDescription `type:"list"`
	// contains filtered or unexported fields
}

func (ListProvisionedCapacityOutput) GoString 

func (s ListProvisionedCapacityOutput) GoString() string

GoString returns the string representation

func (ListProvisionedCapacityOutput) MarshalFields 

func (s ListProvisionedCapacityOutput) MarshalFields(e protocol.FieldEncoder) error

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (ListProvisionedCapacityOutput) SDKResponseMetadata 

func (s ListProvisionedCapacityOutput) SDKResponseMetadata() aws.Response

SDKResponseMetdata return sthe response metadata for the API.

func (ListProvisionedCapacityOutput) String 

func (s ListProvisionedCapacityOutput) String() string

String returns the string representation

type ListProvisionedCapacityRequest 

type ListProvisionedCapacityRequest struct {
	*aws.Request
	Input *ListProvisionedCapacityInput
	Copy  func(*ListProvisionedCapacityInput) ListProvisionedCapacityRequest
}

ListProvisionedCapacityRequest is a API request type for the ListProvisionedCapacity API operation.

func (ListProvisionedCapacityRequest) Send 

func (r ListProvisionedCapacityRequest) Send() (*ListProvisionedCapacityOutput, error)

Send marshals and sends the ListProvisionedCapacity API request.

type ListTagsForVaultInput 

type ListTagsForVaultInput struct {

	// The AccountId value is the AWS account ID of the account that owns the vault.
	// You can either specify an AWS account ID or optionally a single '-' (hyphen),
	// in which case Amazon Glacier uses the AWS account ID associated with the
	// credentials used to sign the request. If you use an account ID, do not include
	// any hyphens ('-') in the ID.
	//
	// AccountId is a required field
	AccountId *string `location:"uri" locationName:"accountId" type:"string" required:"true"`

	// The name of the vault.
	//
	// VaultName is a required field
	VaultName *string `location:"uri" locationName:"vaultName" type:"string" required:"true"`
	// contains filtered or unexported fields
}

The input value for ListTagsForVaultInput.

func (ListTagsForVaultInput) GoString 

func (s ListTagsForVaultInput) GoString() string

GoString returns the string representation

func (ListTagsForVaultInput) MarshalFields 

func (s ListTagsForVaultInput) MarshalFields(e protocol.FieldEncoder) error

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (ListTagsForVaultInput) String 

func (s ListTagsForVaultInput) String() string

String returns the string representation

func (*ListTagsForVaultInput) Validate 

func (s *ListTagsForVaultInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type ListTagsForVaultOutput 

type ListTagsForVaultOutput struct {

	// The tags attached to the vault. Each tag is composed of a key and a value.
	Tags map[string]string `type:"map"`
	// contains filtered or unexported fields
}

Contains the Amazon Glacier response to your request.

func (ListTagsForVaultOutput) GoString 

func (s ListTagsForVaultOutput) GoString() string

GoString returns the string representation

func (ListTagsForVaultOutput) MarshalFields 

func (s ListTagsForVaultOutput) MarshalFields(e protocol.FieldEncoder) error

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (ListTagsForVaultOutput) SDKResponseMetadata 

func (s ListTagsForVaultOutput) SDKResponseMetadata() aws.Response

SDKResponseMetdata return sthe response metadata for the API.

func (ListTagsForVaultOutput) String 

func (s ListTagsForVaultOutput) String() string

String returns the string representation

type ListTagsForVaultRequest 

type ListTagsForVaultRequest struct {
	*aws.Request
	Input *ListTagsForVaultInput
	Copy  func(*ListTagsForVaultInput) ListTagsForVaultRequest
}

ListTagsForVaultRequest is a API request type for the ListTagsForVault API operation.

func (ListTagsForVaultRequest) Send 

func (r ListTagsForVaultRequest) Send() (*ListTagsForVaultOutput, error)

Send marshals and sends the ListTagsForVault API request.

type ListVaultsInput 

type ListVaultsInput struct {

	// The AccountId value is the AWS account ID. This value must match the AWS
	// account ID associated with the credentials used to sign the request. You
	// can either specify an AWS account ID or optionally a single '-' (hyphen),
	// in which case Amazon Glacier uses the AWS account ID associated with the
	// credentials used to sign the request. If you specify your account ID, do
	// not include any hyphens ('-') in the ID.
	//
	// AccountId is a required field
	AccountId *string `location:"uri" locationName:"accountId" type:"string" required:"true"`

	// The maximum number of vaults to be returned. The default limit is 1000. The
	// number of vaults returned might be fewer than the specified limit, but the
	// number of returned vaults never exceeds the limit.
	Limit *string `location:"querystring" locationName:"limit" type:"string"`

	// A string used for pagination. The marker specifies the vault ARN after which
	// the listing of vaults should begin.
	Marker *string `location:"querystring" locationName:"marker" type:"string"`
	// contains filtered or unexported fields
}

Provides options to retrieve the vault list owned by the calling user's account. The list provides metadata information for each vault.

func (ListVaultsInput) GoString 

func (s ListVaultsInput) GoString() string

GoString returns the string representation

func (ListVaultsInput) MarshalFields 

func (s ListVaultsInput) MarshalFields(e protocol.FieldEncoder) error

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (ListVaultsInput) String 

func (s ListVaultsInput) String() string

String returns the string representation

func (*ListVaultsInput) Validate 

func (s *ListVaultsInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type ListVaultsOutput 

type ListVaultsOutput struct {

	// The vault ARN at which to continue pagination of the results. You use the
	// marker in another List Vaults request to obtain more vaults in the list.
	Marker *string `type:"string"`

	// List of vaults.
	VaultList []DescribeVaultOutput `type:"list"`
	// contains filtered or unexported fields
}

Contains the Amazon Glacier response to your request.

func (ListVaultsOutput) GoString 

func (s ListVaultsOutput) GoString() string

GoString returns the string representation

func (ListVaultsOutput) MarshalFields 

func (s ListVaultsOutput) MarshalFields(e protocol.FieldEncoder) error

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (ListVaultsOutput) SDKResponseMetadata 

func (s ListVaultsOutput) SDKResponseMetadata() aws.Response

SDKResponseMetdata return sthe response metadata for the API.

func (ListVaultsOutput) String 

func (s ListVaultsOutput) String() string

String returns the string representation

type ListVaultsPager 

type ListVaultsPager struct {
	aws.Pager
}

ListVaultsPager is used to paginate the request. This can be done by calling Next and CurrentPage.

func (*ListVaultsPager) CurrentPage 

func (p *ListVaultsPager) CurrentPage() *ListVaultsOutput

type ListVaultsRequest 

type ListVaultsRequest struct {
	*aws.Request
	Input *ListVaultsInput
	Copy  func(*ListVaultsInput) ListVaultsRequest
}

ListVaultsRequest is a API request type for the ListVaults API operation.

func (*ListVaultsRequest) Paginate 

func (p *ListVaultsRequest) Paginate(opts ...aws.Option) ListVaultsPager

Paginate pages iterates over the pages of a ListVaultsRequest operation, calling the Next method for each page. Using the paginators Next method will depict whether or not there are more pages.

Note: This operation can generate multiple requests to a service. 

   // Example iterating over at most 3 pages of a ListVaults operation.
		req := client.ListVaultsRequest(input)
		p := req.Paginate()
		for p.Next() {
			page := p.CurrentPage()
		}

		if err := p.Err(); err != nil {
			return err
		}

func (ListVaultsRequest) Send 

func (r ListVaultsRequest) Send() (*ListVaultsOutput, error)

Send marshals and sends the ListVaults API request.

type OutputLocation 

type OutputLocation struct {

	// Describes an S3 location that will receive the results of the job request.
	S3 *S3Location `type:"structure"`
	// contains filtered or unexported fields
}

Contains information about the location where the select job results are stored.

func (OutputLocation) GoString 

func (s OutputLocation) GoString() string

GoString returns the string representation

func (OutputLocation) MarshalFields 

func (s OutputLocation) MarshalFields(e protocol.FieldEncoder) error

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (OutputLocation) String 

func (s OutputLocation) String() string

String returns the string representation

func (*OutputLocation) Validate 

func (s *OutputLocation) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type OutputSerialization 

type OutputSerialization struct {

	// Describes the serialization of CSV-encoded query results.
	Csv *CSVOutput `locationName:"csv" type:"structure"`
	// contains filtered or unexported fields
}

Describes how the select output is serialized.

func (OutputSerialization) GoString 

func (s OutputSerialization) GoString() string

GoString returns the string representation

func (OutputSerialization) MarshalFields 

func (s OutputSerialization) MarshalFields(e protocol.FieldEncoder) error

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (OutputSerialization) String 

func (s OutputSerialization) String() string

String returns the string representation

type PartListElement 

type PartListElement struct {

	// The byte range of a part, inclusive of the upper value of the range.
	RangeInBytes *string `type:"string"`

	// The SHA256 tree hash value that Amazon Glacier calculated for the part. This
	// field is never null.
	SHA256TreeHash *string `type:"string"`
	// contains filtered or unexported fields
}

A list of the part sizes of the multipart upload.

func (PartListElement) GoString 

func (s PartListElement) GoString() string

GoString returns the string representation

func (PartListElement) MarshalFields 

func (s PartListElement) MarshalFields(e protocol.FieldEncoder) error

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (PartListElement) String 

func (s PartListElement) String() string

String returns the string representation

type Permission 

type Permission string
const (
	PermissionFullControl Permission = "FULL_CONTROL"
	PermissionWrite       Permission = "WRITE"
	PermissionWriteAcp    Permission = "WRITE_ACP"
	PermissionRead        Permission = "READ"
	PermissionReadAcp     Permission = "READ_ACP"
)

Enum values for Permission

func (Permission) MarshalValue 

func (enum Permission) MarshalValue() (string, error)

func (Permission) MarshalValueBuf 

func (enum Permission) MarshalValueBuf(b []byte) ([]byte, error)

type ProvisionedCapacityDescription 

type ProvisionedCapacityDescription struct {

	// The ID that identifies the provisioned capacity unit.
	CapacityId *string `type:"string"`

	// The date that the provisioned capacity unit expires, in Universal Coordinated
	// Time (UTC).
	ExpirationDate *string `type:"string"`

	// The date that the provisioned capacity unit was purchased, in Universal Coordinated
	// Time (UTC).
	StartDate *string `type:"string"`
	// contains filtered or unexported fields
}

The definition for a provisioned capacity unit.

func (ProvisionedCapacityDescription) GoString 

func (s ProvisionedCapacityDescription) GoString() string

GoString returns the string representation

func (ProvisionedCapacityDescription) MarshalFields 

func (s ProvisionedCapacityDescription) MarshalFields(e protocol.FieldEncoder) error

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (ProvisionedCapacityDescription) String 

func (s ProvisionedCapacityDescription) String() string

String returns the string representation

type PurchaseProvisionedCapacityInput 

type PurchaseProvisionedCapacityInput struct {

	// The AWS account ID of the account that owns the vault. You can either specify
	// an AWS account ID or optionally a single '-' (hyphen), in which case Amazon
	// Glacier uses the AWS account ID associated with the credentials used to sign
	// the request. If you use an account ID, don't include any hyphens ('-') in
	// the ID.
	//
	// AccountId is a required field
	AccountId *string `location:"uri" locationName:"accountId" type:"string" required:"true"`
	// contains filtered or unexported fields
}

func (PurchaseProvisionedCapacityInput) GoString 

func (s PurchaseProvisionedCapacityInput) GoString() string

GoString returns the string representation

func (PurchaseProvisionedCapacityInput) MarshalFields 

func (s PurchaseProvisionedCapacityInput) MarshalFields(e protocol.FieldEncoder) error

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (PurchaseProvisionedCapacityInput) String 

func (s PurchaseProvisionedCapacityInput) String() string

String returns the string representation

func (*PurchaseProvisionedCapacityInput) Validate 

func (s *PurchaseProvisionedCapacityInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type PurchaseProvisionedCapacityOutput 

type PurchaseProvisionedCapacityOutput struct {

	// The ID that identifies the provisioned capacity unit.
	CapacityId *string `location:"header" locationName:"x-amz-capacity-id" type:"string"`
	// contains filtered or unexported fields
}

func (PurchaseProvisionedCapacityOutput) GoString 

func (s PurchaseProvisionedCapacityOutput) GoString() string

GoString returns the string representation

func (PurchaseProvisionedCapacityOutput) MarshalFields 

func (s PurchaseProvisionedCapacityOutput) MarshalFields(e protocol.FieldEncoder) error

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (PurchaseProvisionedCapacityOutput) SDKResponseMetadata 

func (s PurchaseProvisionedCapacityOutput) SDKResponseMetadata() aws.Response

SDKResponseMetdata return sthe response metadata for the API.

func (PurchaseProvisionedCapacityOutput) String 

func (s PurchaseProvisionedCapacityOutput) String() string

String returns the string representation

type PurchaseProvisionedCapacityRequest 

type PurchaseProvisionedCapacityRequest struct {
	*aws.Request
	Input *PurchaseProvisionedCapacityInput
	Copy  func(*PurchaseProvisionedCapacityInput) PurchaseProvisionedCapacityRequest
}

PurchaseProvisionedCapacityRequest is a API request type for the PurchaseProvisionedCapacity API operation.

func (PurchaseProvisionedCapacityRequest) Send 

func (r PurchaseProvisionedCapacityRequest) Send() (*PurchaseProvisionedCapacityOutput, error)

Send marshals and sends the PurchaseProvisionedCapacity API request.

type QuoteFields 

type QuoteFields string
const (
	QuoteFieldsAlways   QuoteFields = "ALWAYS"
	QuoteFieldsAsneeded QuoteFields = "ASNEEDED"
)

Enum values for QuoteFields

func (QuoteFields) MarshalValue 

func (enum QuoteFields) MarshalValue() (string, error)

func (QuoteFields) MarshalValueBuf 

func (enum QuoteFields) MarshalValueBuf(b []byte) ([]byte, error)

type RemoveTagsFromVaultInput 

type RemoveTagsFromVaultInput struct {

	// The AccountId value is the AWS account ID of the account that owns the vault.
	// You can either specify an AWS account ID or optionally a single '-' (hyphen),
	// in which case Amazon Glacier uses the AWS account ID associated with the
	// credentials used to sign the request. If you use an account ID, do not include
	// any hyphens ('-') in the ID.
	//
	// AccountId is a required field
	AccountId *string `location:"uri" locationName:"accountId" type:"string" required:"true"`

	// A list of tag keys. Each corresponding tag is removed from the vault.
	TagKeys []string `type:"list"`

	// The name of the vault.
	//
	// VaultName is a required field
	VaultName *string `location:"uri" locationName:"vaultName" type:"string" required:"true"`
	// contains filtered or unexported fields
}

The input value for RemoveTagsFromVaultInput.

func (RemoveTagsFromVaultInput) GoString 

func (s RemoveTagsFromVaultInput) GoString() string

GoString returns the string representation

func (RemoveTagsFromVaultInput) MarshalFields 

func (s RemoveTagsFromVaultInput) MarshalFields(e protocol.FieldEncoder) error

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (RemoveTagsFromVaultInput) String 

func (s RemoveTagsFromVaultInput) String() string

String returns the string representation

func (*RemoveTagsFromVaultInput) Validate 

func (s *RemoveTagsFromVaultInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type RemoveTagsFromVaultOutput 

type RemoveTagsFromVaultOutput struct {
	// contains filtered or unexported fields
}

func (RemoveTagsFromVaultOutput) GoString 

func (s RemoveTagsFromVaultOutput) GoString() string

GoString returns the string representation

func (RemoveTagsFromVaultOutput) MarshalFields 

func (s RemoveTagsFromVaultOutput) MarshalFields(e protocol.FieldEncoder) error

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (RemoveTagsFromVaultOutput) SDKResponseMetadata 

func (s RemoveTagsFromVaultOutput) SDKResponseMetadata() aws.Response

SDKResponseMetdata return sthe response metadata for the API.

func (RemoveTagsFromVaultOutput) String 

func (s RemoveTagsFromVaultOutput) String() string

String returns the string representation

type RemoveTagsFromVaultRequest 

type RemoveTagsFromVaultRequest struct {
	*aws.Request
	Input *RemoveTagsFromVaultInput
	Copy  func(*RemoveTagsFromVaultInput) RemoveTagsFromVaultRequest
}

RemoveTagsFromVaultRequest is a API request type for the RemoveTagsFromVault API operation.

func (RemoveTagsFromVaultRequest) Send 

func (r RemoveTagsFromVaultRequest) Send() (*RemoveTagsFromVaultOutput, error)

Send marshals and sends the RemoveTagsFromVault API request.

type S3Location 

type S3Location struct {

	// A list of grants that control access to the staged results.
	AccessControlList []Grant `type:"list"`

	// The name of the Amazon S3 bucket where the job results are stored.
	BucketName *string `type:"string"`

	// The canned access control list (ACL) to apply to the job results.
	CannedACL CannedACL `type:"string" enum:"true"`

	// Contains information about the encryption used to store the job results in
	// Amazon S3.
	Encryption *Encryption `type:"structure"`

	// The prefix that is prepended to the results for this request.
	Prefix *string `type:"string"`

	// The storage class used to store the job results.
	StorageClass StorageClass `type:"string" enum:"true"`

	// The tag-set that is applied to the job results.
	Tagging map[string]string `type:"map"`

	// A map of metadata to store with the job results in Amazon S3.
	UserMetadata map[string]string `type:"map"`
	// contains filtered or unexported fields
}

Contains information about the location in Amazon S3 where the select job results are stored.

func (S3Location) GoString 

func (s S3Location) GoString() string

GoString returns the string representation

func (S3Location) MarshalFields 

func (s S3Location) MarshalFields(e protocol.FieldEncoder) error

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (S3Location) String 

func (s S3Location) String() string

String returns the string representation

func (*S3Location) Validate 

func (s *S3Location) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type SelectParameters 

type SelectParameters struct {

	// The expression that is used to select the object.
	Expression *string `type:"string"`

	// The type of the provided expression, for example SQL.
	ExpressionType ExpressionType `type:"string" enum:"true"`

	// Describes the serialization format of the object.
	InputSerialization *InputSerialization `type:"structure"`

	// Describes how the results of the select job are serialized.
	OutputSerialization *OutputSerialization `type:"structure"`
	// contains filtered or unexported fields
}

Contains information about the parameters used for a select.

func (SelectParameters) GoString 

func (s SelectParameters) GoString() string

GoString returns the string representation

func (SelectParameters) MarshalFields 

func (s SelectParameters) MarshalFields(e protocol.FieldEncoder) error

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (SelectParameters) String 

func (s SelectParameters) String() string

String returns the string representation

type SetDataRetrievalPolicyInput 

type SetDataRetrievalPolicyInput struct {

	// The AccountId value is the AWS account ID. This value must match the AWS
	// account ID associated with the credentials used to sign the request. You
	// can either specify an AWS account ID or optionally a single '-' (hyphen),
	// in which case Amazon Glacier uses the AWS account ID associated with the
	// credentials used to sign the request. If you specify your account ID, do
	// not include any hyphens ('-') in the ID.
	//
	// AccountId is a required field
	AccountId *string `location:"uri" locationName:"accountId" type:"string" required:"true"`

	// The data retrieval policy in JSON format.
	Policy *DataRetrievalPolicy `type:"structure"`
	// contains filtered or unexported fields
}

SetDataRetrievalPolicy input.

func (SetDataRetrievalPolicyInput) GoString 

func (s SetDataRetrievalPolicyInput) GoString() string

GoString returns the string representation

func (SetDataRetrievalPolicyInput) MarshalFields 

func (s SetDataRetrievalPolicyInput) MarshalFields(e protocol.FieldEncoder) error

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (SetDataRetrievalPolicyInput) String 

func (s SetDataRetrievalPolicyInput) String() string

String returns the string representation

func (*SetDataRetrievalPolicyInput) Validate 

func (s *SetDataRetrievalPolicyInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type SetDataRetrievalPolicyOutput 

type SetDataRetrievalPolicyOutput struct {
	// contains filtered or unexported fields
}

func (SetDataRetrievalPolicyOutput) GoString 

func (s SetDataRetrievalPolicyOutput) GoString() string

GoString returns the string representation

func (SetDataRetrievalPolicyOutput) MarshalFields 

func (s SetDataRetrievalPolicyOutput) MarshalFields(e protocol.FieldEncoder) error

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (SetDataRetrievalPolicyOutput) SDKResponseMetadata 

func (s SetDataRetrievalPolicyOutput) SDKResponseMetadata() aws.Response

SDKResponseMetdata return sthe response metadata for the API.

func (SetDataRetrievalPolicyOutput) String 

func (s SetDataRetrievalPolicyOutput) String() string

String returns the string representation

type SetDataRetrievalPolicyRequest 

type SetDataRetrievalPolicyRequest struct {
	*aws.Request
	Input *SetDataRetrievalPolicyInput
	Copy  func(*SetDataRetrievalPolicyInput) SetDataRetrievalPolicyRequest
}

SetDataRetrievalPolicyRequest is a API request type for the SetDataRetrievalPolicy API operation.

func (SetDataRetrievalPolicyRequest) Send 

func (r SetDataRetrievalPolicyRequest) Send() (*SetDataRetrievalPolicyOutput, error)

Send marshals and sends the SetDataRetrievalPolicy API request.

type SetVaultAccessPolicyInput 

type SetVaultAccessPolicyInput struct {

	// The AccountId value is the AWS account ID of the account that owns the vault.
	// You can either specify an AWS account ID or optionally a single '-' (hyphen),
	// in which case Amazon Glacier uses the AWS account ID associated with the
	// credentials used to sign the request. If you use an account ID, do not include
	// any hyphens ('-') in the ID.
	//
	// AccountId is a required field
	AccountId *string `location:"uri" locationName:"accountId" type:"string" required:"true"`

	// The vault access policy as a JSON string.
	Policy *VaultAccessPolicy `locationName:"policy" type:"structure"`

	// The name of the vault.
	//
	// VaultName is a required field
	VaultName *string `location:"uri" locationName:"vaultName" type:"string" required:"true"`
	// contains filtered or unexported fields
}

SetVaultAccessPolicy input.

func (SetVaultAccessPolicyInput) GoString 

func (s SetVaultAccessPolicyInput) GoString() string

GoString returns the string representation

func (SetVaultAccessPolicyInput) MarshalFields 

func (s SetVaultAccessPolicyInput) MarshalFields(e protocol.FieldEncoder) error

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (SetVaultAccessPolicyInput) String 

func (s SetVaultAccessPolicyInput) String() string

String returns the string representation

func (*SetVaultAccessPolicyInput) Validate 

func (s *SetVaultAccessPolicyInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type SetVaultAccessPolicyOutput 

type SetVaultAccessPolicyOutput struct {
	// contains filtered or unexported fields
}

func (SetVaultAccessPolicyOutput) GoString 

func (s SetVaultAccessPolicyOutput) GoString() string

GoString returns the string representation

func (SetVaultAccessPolicyOutput) MarshalFields 

func (s SetVaultAccessPolicyOutput) MarshalFields(e protocol.FieldEncoder) error

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (SetVaultAccessPolicyOutput) SDKResponseMetadata 

func (s SetVaultAccessPolicyOutput) SDKResponseMetadata() aws.Response

SDKResponseMetdata return sthe response metadata for the API.

func (SetVaultAccessPolicyOutput) String 

func (s SetVaultAccessPolicyOutput) String() string

String returns the string representation

type SetVaultAccessPolicyRequest 

type SetVaultAccessPolicyRequest struct {
	*aws.Request
	Input *SetVaultAccessPolicyInput
	Copy  func(*SetVaultAccessPolicyInput) SetVaultAccessPolicyRequest
}

SetVaultAccessPolicyRequest is a API request type for the SetVaultAccessPolicy API operation.

func (SetVaultAccessPolicyRequest) Send 

func (r SetVaultAccessPolicyRequest) Send() (*SetVaultAccessPolicyOutput, error)

Send marshals and sends the SetVaultAccessPolicy API request.

type SetVaultNotificationsInput 

type SetVaultNotificationsInput struct {

	// The AccountId value is the AWS account ID of the account that owns the vault.
	// You can either specify an AWS account ID or optionally a single '-' (hyphen),
	// in which case Amazon Glacier uses the AWS account ID associated with the
	// credentials used to sign the request. If you use an account ID, do not include
	// any hyphens ('-') in the ID.
	//
	// AccountId is a required field
	AccountId *string `location:"uri" locationName:"accountId" type:"string" required:"true"`

	// The name of the vault.
	//
	// VaultName is a required field
	VaultName *string `location:"uri" locationName:"vaultName" type:"string" required:"true"`

	// Provides options for specifying notification configuration.
	VaultNotificationConfig *VaultNotificationConfig `locationName:"vaultNotificationConfig" type:"structure"`
	// contains filtered or unexported fields
}

Provides options to configure notifications that will be sent when specific events happen to a vault.

func (SetVaultNotificationsInput) GoString 

func (s SetVaultNotificationsInput) GoString() string

GoString returns the string representation

func (SetVaultNotificationsInput) MarshalFields 

func (s SetVaultNotificationsInput) MarshalFields(e protocol.FieldEncoder) error

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (SetVaultNotificationsInput) String 

func (s SetVaultNotificationsInput) String() string

String returns the string representation

func (*SetVaultNotificationsInput) Validate 

func (s *SetVaultNotificationsInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type SetVaultNotificationsOutput 

type SetVaultNotificationsOutput struct {
	// contains filtered or unexported fields
}

func (SetVaultNotificationsOutput) GoString 

func (s SetVaultNotificationsOutput) GoString() string

GoString returns the string representation

func (SetVaultNotificationsOutput) MarshalFields 

func (s SetVaultNotificationsOutput) MarshalFields(e protocol.FieldEncoder) error

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (SetVaultNotificationsOutput) SDKResponseMetadata 

func (s SetVaultNotificationsOutput) SDKResponseMetadata() aws.Response

SDKResponseMetdata return sthe response metadata for the API.

func (SetVaultNotificationsOutput) String 

func (s SetVaultNotificationsOutput) String() string

String returns the string representation

type SetVaultNotificationsRequest 

type SetVaultNotificationsRequest struct {
	*aws.Request
	Input *SetVaultNotificationsInput
	Copy  func(*SetVaultNotificationsInput) SetVaultNotificationsRequest
}

SetVaultNotificationsRequest is a API request type for the SetVaultNotifications API operation.

func (SetVaultNotificationsRequest) Send 

func (r SetVaultNotificationsRequest) Send() (*SetVaultNotificationsOutput, error)

Send marshals and sends the SetVaultNotifications API request.

type StatusCode 

type StatusCode string
const (
	StatusCodeInProgress StatusCode = "InProgress"
	StatusCodeSucceeded  StatusCode = "Succeeded"
	StatusCodeFailed     StatusCode = "Failed"
)

Enum values for StatusCode

func (StatusCode) MarshalValue 

func (enum StatusCode) MarshalValue() (string, error)

func (StatusCode) MarshalValueBuf 

func (enum StatusCode) MarshalValueBuf(b []byte) ([]byte, error)

type StorageClass 

type StorageClass string
const (
	StorageClassStandard          StorageClass = "STANDARD"
	StorageClassReducedRedundancy StorageClass = "REDUCED_REDUNDANCY"
	StorageClassStandardIa        StorageClass = "STANDARD_IA"
)

Enum values for StorageClass

func (StorageClass) MarshalValue 

func (enum StorageClass) MarshalValue() (string, error)

func (StorageClass) MarshalValueBuf 

func (enum StorageClass) MarshalValueBuf(b []byte) ([]byte, error)

type Type 

type Type string
const (
	TypeAmazonCustomerByEmail Type = "AmazonCustomerByEmail"
	TypeCanonicalUser         Type = "CanonicalUser"
	TypeGroup                 Type = "Group"
)

Enum values for Type

func (Type) MarshalValue 

func (enum Type) MarshalValue() (string, error)

func (Type) MarshalValueBuf 

func (enum Type) MarshalValueBuf(b []byte) ([]byte, error)

type UploadArchiveInput 

type UploadArchiveInput struct {

	// The AccountId value is the AWS account ID of the account that owns the vault.
	// You can either specify an AWS account ID or optionally a single '-' (hyphen),
	// in which case Amazon Glacier uses the AWS account ID associated with the
	// credentials used to sign the request. If you use an account ID, do not include
	// any hyphens ('-') in the ID.
	//
	// AccountId is a required field
	AccountId *string `location:"uri" locationName:"accountId" type:"string" required:"true"`

	// The optional description of the archive you are uploading.
	ArchiveDescription *string `location:"header" locationName:"x-amz-archive-description" type:"string"`

	// The data to upload.
	Body io.ReadSeeker `locationName:"body" type:"blob"`

	// The SHA256 tree hash of the data being uploaded.
	Checksum *string `location:"header" locationName:"x-amz-sha256-tree-hash" type:"string"`

	// The name of the vault.
	//
	// VaultName is a required field
	VaultName *string `location:"uri" locationName:"vaultName" type:"string" required:"true"`
	// contains filtered or unexported fields
}

Provides options to add an archive to a vault.

func (UploadArchiveInput) GoString 

func (s UploadArchiveInput) GoString() string

GoString returns the string representation

func (UploadArchiveInput) MarshalFields 

func (s UploadArchiveInput) MarshalFields(e protocol.FieldEncoder) error

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (UploadArchiveInput) String 

func (s UploadArchiveInput) String() string

String returns the string representation

func (*UploadArchiveInput) Validate 

func (s *UploadArchiveInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type UploadArchiveOutput 

type UploadArchiveOutput struct {

	// The ID of the archive. This value is also included as part of the location.
	ArchiveId *string `location:"header" locationName:"x-amz-archive-id" type:"string"`

	// The checksum of the archive computed by Amazon Glacier.
	Checksum *string `location:"header" locationName:"x-amz-sha256-tree-hash" type:"string"`

	// The relative URI path of the newly added archive resource.
	Location *string `location:"header" locationName:"Location" type:"string"`
	// contains filtered or unexported fields
}

Contains the Amazon Glacier response to your request.

For information about the underlying REST API, see Upload Archive (http://docs.aws.amazon.com/amazonglacier/latest/dev/api-archive-post.html). For conceptual information, see Working with Archives in Amazon Glacier (http://docs.aws.amazon.com/amazonglacier/latest/dev/working-with-archives.html).

func (UploadArchiveOutput) GoString 

func (s UploadArchiveOutput) GoString() string

GoString returns the string representation

func (UploadArchiveOutput) MarshalFields 

func (s UploadArchiveOutput) MarshalFields(e protocol.FieldEncoder) error

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (UploadArchiveOutput) SDKResponseMetadata 

func (s UploadArchiveOutput) SDKResponseMetadata() aws.Response

SDKResponseMetdata return sthe response metadata for the API.

func (UploadArchiveOutput) String 

func (s UploadArchiveOutput) String() string

String returns the string representation

type UploadArchiveRequest 

type UploadArchiveRequest struct {
	*aws.Request
	Input *UploadArchiveInput
	Copy  func(*UploadArchiveInput) UploadArchiveRequest
}

UploadArchiveRequest is a API request type for the UploadArchive API operation.

func (UploadArchiveRequest) Send 

func (r UploadArchiveRequest) Send() (*UploadArchiveOutput, error)

Send marshals and sends the UploadArchive API request.

type UploadListElement 

type UploadListElement struct {

	// The description of the archive that was specified in the Initiate Multipart
	// Upload request.
	ArchiveDescription *string `type:"string"`

	// The UTC time at which the multipart upload was initiated.
	CreationDate *string `type:"string"`

	// The ID of a multipart upload.
	MultipartUploadId *string `type:"string"`

	// The part size, in bytes, specified in the Initiate Multipart Upload request.
	// This is the size of all the parts in the upload except the last part, which
	// may be smaller than this size.
	PartSizeInBytes *int64 `type:"long"`

	// The Amazon Resource Name (ARN) of the vault that contains the archive.
	VaultARN *string `type:"string"`
	// contains filtered or unexported fields
}

A list of in-progress multipart uploads for a vault.

func (UploadListElement) GoString 

func (s UploadListElement) GoString() string

GoString returns the string representation

func (UploadListElement) MarshalFields 

func (s UploadListElement) MarshalFields(e protocol.FieldEncoder) error

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (UploadListElement) String 

func (s UploadListElement) String() string

String returns the string representation

type UploadMultipartPartInput 

type UploadMultipartPartInput struct {

	// The AccountId value is the AWS account ID of the account that owns the vault.
	// You can either specify an AWS account ID or optionally a single '-' (hyphen),
	// in which case Amazon Glacier uses the AWS account ID associated with the
	// credentials used to sign the request. If you use an account ID, do not include
	// any hyphens ('-') in the ID.
	//
	// AccountId is a required field
	AccountId *string `location:"uri" locationName:"accountId" type:"string" required:"true"`

	// The data to upload.
	Body io.ReadSeeker `locationName:"body" type:"blob"`

	// The SHA256 tree hash of the data being uploaded.
	Checksum *string `location:"header" locationName:"x-amz-sha256-tree-hash" type:"string"`

	// Identifies the range of bytes in the assembled archive that will be uploaded
	// in this part. Amazon Glacier uses this information to assemble the archive
	// in the proper sequence. The format of this header follows RFC 2616. An example
	// header is Content-Range:bytes 0-4194303/*.
	Range *string `location:"header" locationName:"Content-Range" type:"string"`

	// The upload ID of the multipart upload.
	//
	// UploadId is a required field
	UploadId *string `location:"uri" locationName:"uploadId" type:"string" required:"true"`

	// The name of the vault.
	//
	// VaultName is a required field
	VaultName *string `location:"uri" locationName:"vaultName" type:"string" required:"true"`
	// contains filtered or unexported fields
}

Provides options to upload a part of an archive in a multipart upload operation.

func (UploadMultipartPartInput) GoString 

func (s UploadMultipartPartInput) GoString() string

GoString returns the string representation

func (UploadMultipartPartInput) MarshalFields 

func (s UploadMultipartPartInput) MarshalFields(e protocol.FieldEncoder) error

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (UploadMultipartPartInput) String 

func (s UploadMultipartPartInput) String() string

String returns the string representation

func (*UploadMultipartPartInput) Validate 

func (s *UploadMultipartPartInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type UploadMultipartPartOutput 

type UploadMultipartPartOutput struct {

	// The SHA256 tree hash that Amazon Glacier computed for the uploaded part.
	Checksum *string `location:"header" locationName:"x-amz-sha256-tree-hash" type:"string"`
	// contains filtered or unexported fields
}

Contains the Amazon Glacier response to your request.

func (UploadMultipartPartOutput) GoString 

func (s UploadMultipartPartOutput) GoString() string

GoString returns the string representation

func (UploadMultipartPartOutput) MarshalFields 

func (s UploadMultipartPartOutput) MarshalFields(e protocol.FieldEncoder) error

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (UploadMultipartPartOutput) SDKResponseMetadata 

func (s UploadMultipartPartOutput) SDKResponseMetadata() aws.Response

SDKResponseMetdata return sthe response metadata for the API.

func (UploadMultipartPartOutput) String 

func (s UploadMultipartPartOutput) String() string

String returns the string representation

type UploadMultipartPartRequest 

type UploadMultipartPartRequest struct {
	*aws.Request
	Input *UploadMultipartPartInput
	Copy  func(*UploadMultipartPartInput) UploadMultipartPartRequest
}

UploadMultipartPartRequest is a API request type for the UploadMultipartPart API operation.

func (UploadMultipartPartRequest) Send 

func (r UploadMultipartPartRequest) Send() (*UploadMultipartPartOutput, error)

Send marshals and sends the UploadMultipartPart API request.

type VaultAccessPolicy 

type VaultAccessPolicy struct {

	// The vault access policy.
	Policy *string `type:"string"`
	// contains filtered or unexported fields
}

Contains the vault access policy.

func (VaultAccessPolicy) GoString 

func (s VaultAccessPolicy) GoString() string

GoString returns the string representation

func (VaultAccessPolicy) MarshalFields 

func (s VaultAccessPolicy) MarshalFields(e protocol.FieldEncoder) error

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (VaultAccessPolicy) String 

func (s VaultAccessPolicy) String() string

String returns the string representation

type VaultLockPolicy 

type VaultLockPolicy struct {

	// The vault lock policy.
	Policy *string `type:"string"`
	// contains filtered or unexported fields
}

Contains the vault lock policy.

func (VaultLockPolicy) GoString 

func (s VaultLockPolicy) GoString() string

GoString returns the string representation

func (VaultLockPolicy) MarshalFields 

func (s VaultLockPolicy) MarshalFields(e protocol.FieldEncoder) error

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (VaultLockPolicy) String 

func (s VaultLockPolicy) String() string

String returns the string representation

type VaultNotificationConfig 

type VaultNotificationConfig struct {

	// A list of one or more events for which Amazon Glacier will send a notification
	// to the specified Amazon SNS topic.
	Events []string `type:"list"`

	// The Amazon Simple Notification Service (Amazon SNS) topic Amazon Resource
	// Name (ARN).
	SNSTopic *string `type:"string"`
	// contains filtered or unexported fields
}

Represents a vault's notification configuration.

func (VaultNotificationConfig) GoString 

func (s VaultNotificationConfig) GoString() string

GoString returns the string representation

func (VaultNotificationConfig) MarshalFields 

func (s VaultNotificationConfig) MarshalFields(e protocol.FieldEncoder) error

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (VaultNotificationConfig) String 

func (s VaultNotificationConfig) String() string

String returns the string representation

Source Files

View all Source files

Directories

Path Synopsis
Package glacieriface provides an interface to enable mocking the Amazon Glacier service client for testing your code.
 Package glacieriface provides an interface to enable mocking the Amazon Glacier service client for testing your code.

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL
go.dev uses cookies from Google to deliver and enhance the quality of its services and to analyze traffic. Learn more.