config

Documentation

Index

• type APIConfig
• type ImageConfig
• type ImageVolumesType
• type NetworkConfig
• type RootConfig
• type RuntimeConfig

Types

type APIConfig

type APIConfig struct {
	// GRPCMaxSendMsgSize is the maximum grpc send message size in bytes.
	GRPCMaxSendMsgSize int `toml:"grpc_max_send_msg_size"`

	// GRPCMaxRecvMsgSize is the maximum grpc receive message size in bytes.
	GRPCMaxRecvMsgSize int `toml:"grpc_max_recv_msg_size"`

	// Listen is the path to the AF_LOCAL socket on which cri-o will listen.
	// This may support proto://addr formats later, but currently this is just
	// a path.
	Listen string `toml:"listen"`

	// StreamAddress is the IP address on which the stream server will listen.
	StreamAddress string `toml:"stream_address"`

	// StreamPort is the port on which the stream server will listen.
	StreamPort string `toml:"stream_port"`

	// StreamEnableTLS enables encrypted tls transport of the stream server
	StreamEnableTLS bool `toml:"stream_enable_tls"`

	// StreamTLSCert is the x509 certificate file path used to serve the encrypted stream
	StreamTLSCert string `toml:"stream_tls_cert"`

	// StreamTLSKey is the key file path used to serve the encrypted stream
	StreamTLSKey string `toml:"stream_tls_key"`

	// StreamTLSCA is the x509 CA(s) file used to verify and authenticate client
	// communication with the tls encrypted stream
	StreamTLSCA string `toml:"stream_tls_ca"`
}

APIConfig represents the "crio.api" TOML config table.

type ImageConfig

type ImageConfig struct {
	// DefaultTransport is a value we prefix to image names that fail to
	// validate source references.
	DefaultTransport string `toml:"default_transport"`
	// PauseImage is the name of an image which we use to instantiate infra
	// containers.
	PauseImage string `toml:"pause_image"`
	// PauseImageAuthFile, if not empty, is a path to a docker/config.json-like
	// file containing credentials necessary for pulling PauseImage
	PauseImageAuthFile string `toml:"pause_image_auth_file"`
	// PauseCommand is the path of the binary we run in an infra
	// container that's been instantiated using PauseImage.
	PauseCommand string `toml:"pause_command"`
	// SignaturePolicyPath is the name of the file which decides what sort
	// of policy we use when deciding whether or not to trust an image that
	// we've pulled.  Outside of testing situations, it is strongly advised
	// that this be left unspecified so that the default system-wide policy
	// will be used.
	SignaturePolicyPath string `toml:"signature_policy"`
	// InsecureRegistries is a list of registries that must be contacted w/o
	// TLS verification.
	InsecureRegistries []string `toml:"insecure_registries"`
	// ImageVolumes controls how volumes specified in image config are handled
	ImageVolumes ImageVolumesType `toml:"image_volumes"`
	// Registries holds a list of registries used to pull unqualified images
	Registries []string `toml:"registries"`
}

ImageConfig represents the "crio.image" TOML config table.

type ImageVolumesType

type ImageVolumesType string

ImageVolumesType describes image volume handling strategies

const (
	// ImageVolumesMkdir option is for using mkdir to handle image volumes
	ImageVolumesMkdir ImageVolumesType = "mkdir"
	// ImageVolumesIgnore option is for ignoring image volumes altogether
	ImageVolumesIgnore ImageVolumesType = "ignore"
	// ImageVolumesBind option is for using bind mounted volumes
	ImageVolumesBind ImageVolumesType = "bind"
)

type NetworkConfig

type NetworkConfig struct {
	// NetworkDir is where CNI network configuration files are stored.
	NetworkDir string `toml:"network_dir"`

	// PluginDir is where CNI plugin binaries are stored.
	PluginDir string `toml:"plugin_dir"`
}

NetworkConfig represents the "crio.network" TOML config table

type RootConfig

type RootConfig struct {
	// Root is a path to the "root directory" where data not
	// explicitly handled by other options will be stored.
	Root string `toml:"root"`

	// RunRoot is a path to the "run directory" where state information not
	// explicitly handled by other options will be stored.
	RunRoot string `toml:"runroot"`

	// Storage is the name of the storage driver which handles actually
	// storing the contents of containers.
	Storage string `toml:"storage_driver"`

	// StorageOption is a list of storage driver specific options.
	StorageOptions []string `toml:"storage_option"`

	// LogDir is the default log directory were all logs will go unless kubelet
	// tells us to put them somewhere else.
	LogDir string `toml:"log_dir"`

	// FileLocking specifies whether to use file-based or in-memory locking
	// File-based locking is required when multiple users of lib are
	// present on the same system
	FileLocking bool `toml:"file_locking"`

	// FileLockingPath specifies the path to use for the locking.
	FileLockingPath string `toml:"file_locking_path"`
}

RootConfig represents the root of the "crio" TOML config table.

type RuntimeConfig

type RuntimeConfig struct {
	// Runtime is the OCI compatible runtime used for trusted container workloads.
	// This is a mandatory setting as this runtime will be the default one and
	// will also be used for untrusted container workloads if
	// RuntimeUntrustedWorkload is not set.
	//
	// DEPRECATED: use Runtimes instead.
	//
	Runtime string `toml:"runtime"`

	// DefaultRuntime is the _name_ of the OCI runtime to be used as the default.
	// The name is matched against the Runtimes map below.
	DefaultRuntime string `toml:"default_runtime"`

	// RuntimeUntrustedWorkload is the OCI compatible runtime used for
	// untrusted container workloads. This is an optional setting, except
	// if DefaultWorkloadTrust is set to "untrusted".
	// DEPRECATED: use Runtimes instead. If provided, this runtime is
	//     mapped to the runtime handler named 'untrusted'. It is a
	//     configuration error to provide both the (now deprecated)
	//     RuntimeUntrustedWorkload and a handler in the Runtimes handler
	//     map (below) for 'untrusted' workloads at the same time. Please
	//     provide one or the other.
	//     The support of this option will continue through versions 1.12 and 1.13.
	//     By version 1.14, this option will no longer exist.
	RuntimeUntrustedWorkload string `toml:"runtime_untrusted_workload"`

	// DefaultWorkloadTrust is the default level of trust crio puts in container
	// workloads. This can either be "trusted" or "untrusted" and the default
	// is "trusted"
	// Containers can be run through different container runtimes, depending on
	// the trust hints we receive from kubelet:
	// - If kubelet tags a container workload as untrusted, crio will try first
	// to run it through the untrusted container workload runtime. If it is not
	// set, crio will use the trusted runtime.
	// - If kubelet does not provide any information about the container workload trust
	// level, the selected runtime will depend on the DefaultWorkloadTrust setting.
	// If it is set to "untrusted", then all containers except for the host privileged
	// ones, will be run by the RuntimeUntrustedWorkload runtime. Host privileged
	// containers are by definition trusted and will always use the trusted container
	// runtime. If DefaultWorkloadTrust is set to "trusted", crio will use the trusted
	// container runtime for all containers.
	// DEPRECATED: The runtime handler should provide a key to the map of runtimes,
	//     avoiding the need to rely on the level of trust of the workload to choose
	//     an appropriate runtime.
	//     The support of this option will continue through versions 1.12 and 1.13.
	//     By version 1.14, this option will no longer exist.
	DefaultWorkloadTrust string `toml:"default_workload_trust"`

	// Runtimes defines a list of OCI compatible runtimes. The runtime to
	// use is picked based on the runtime_handler provided by the CRI. If
	// no runtime_handler is provided, the runtime will be picked based on
	// the level of trust of the workload.
	Runtimes map[string]oci.RuntimeHandler `toml:"runtimes"`

	// NoPivot instructs the runtime to not use `pivot_root`, but instead use `MS_MOVE`
	NoPivot bool `toml:"no_pivot"`

	// Conmon is the path to conmon binary, used for managing the runtime.
	Conmon string `toml:"conmon"`

	// ConmonEnv is the environment variable list for conmon process.
	ConmonEnv []string `toml:"conmon_env"`

	// SELinux determines whether or not SELinux is used for pod separation.
	SELinux bool `toml:"selinux"`

	// SeccompProfile is the seccomp json profile path which is used as the
	// default for the runtime.
	SeccompProfile string `toml:"seccomp_profile"`

	// ApparmorProfile is the apparmor profile name which is used as the
	// default for the runtime.
	ApparmorProfile string `toml:"apparmor_profile"`

	// CgroupManager is the manager implementation name which is used to
	// handle cgroups for containers.
	CgroupManager string `toml:"cgroup_manager"`

	// HooksDir holds paths to the directories containing hooks
	// configuration files.  When the same filename is present in in
	// multiple directories, the file in the directory listed last in
	// this slice takes precedence.
	HooksDir []string `toml:"hooks_dir"`

	// DefaultMounts is the list of mounts to be mounted for each container
	// The format of each mount is "host-path:container-path"
	DefaultMounts []string `toml:"default_mounts"`

	// DefaultMountsFile is the file path for the default mounts to be mounted for the container
	// Note, for testing purposes mainly
	DefaultMountsFile string `toml:"default_mounts_file"`

	// PidsLimit is the number of processes each container is restricted to
	// by the cgroup process number controller.
	PidsLimit int64 `toml:"pids_limit"`

	// LogSizeMax is the maximum number of bytes after which the log file
	// will be truncated. It can be expressed as a human-friendly string
	// that is parsed to bytes.
	// Negative values indicate that the log file won't be truncated.
	LogSizeMax int64 `toml:"log_size_max"`

	// ContainerExitsDir is the directory in which container exit files are
	// written to by conmon.
	ContainerExitsDir string `toml:"container_exits_dir"`

	// ContainerAttachSocketDir is the location for container attach sockets.
	ContainerAttachSocketDir string `toml:"container_attach_socket_dir"`

	// ManageNetworkNSLifecycle determines whether we pin and remove network namespace
	// and manage its lifecycle
	ManageNetworkNSLifecycle bool `toml:"manage_network_ns_lifecycle"`

	// ReadOnly run all pods/containers in read-only mode.
	// This mode will mount tmpfs on /run, /tmp and /var/tmp, if those are not mountpoints
	// Will also set the readonly flag in the OCI Runtime Spec.  In this mode containers
	// will only be able to write to volumes mounted into them
	ReadOnly bool `toml:"read_only"`

	// BindMountPrefix is the prefix to use for the source of the bind mounts.
	BindMountPrefix string `toml:"bind_mount_prefix"`

	// UIDMappings specifies the UID mappings to have in the user namespace.
	// A range is specified in the form containerUID:HostUID:Size.  Multiple
	// ranges are separed by comma.
	UIDMappings string `toml:"uid_mappings"`

	// GIDMappings specifies the GID mappings to have in the user namespace.
	// A range is specified in the form containerUID:HostUID:Size.  Multiple
	// ranges are separed by comma.
	GIDMappings string `toml:"gid_mappings"`

	// Capabilities to add to all containers.
	DefaultCapabilities []string `toml:"default_capabilities"`

	// LogLevel determines the verbosity of the logs based on the level it is set to.
	// Options are fatal, panic, error (default), warn, info, and debug.
	LogLevel string `toml:"log_level"`

	// CtrStopTimeout specifies the time to wait before to generate an
	// error because the container state is still tagged as "running".
	CtrStopTimeout int64 `toml:"ctr_stop_timeout"`

	// Sysctls to add to all containers.
	DefaultSysctls []string `toml:"default_sysctls"`

	// DefeultUlimits specifies the default ulimits to apply to containers
	DefaultUlimits []string `toml:"default_ulimits"`
}

RuntimeConfig represents the "crio.runtime" TOML config table.