Documentation ¶
Overview ¶
Package route53domains provides a client for Amazon Route 53 Domains.
Index ¶
- Constants
- type BillingRecord
- type CheckDomainAvailabilityInput
- type CheckDomainAvailabilityOutput
- type ContactDetail
- type DeleteTagsForDomainInput
- type DeleteTagsForDomainOutput
- type DisableDomainAutoRenewInput
- type DisableDomainAutoRenewOutput
- type DisableDomainTransferLockInput
- type DisableDomainTransferLockOutput
- type DomainSuggestion
- type DomainSummary
- type EnableDomainAutoRenewInput
- type EnableDomainAutoRenewOutput
- type EnableDomainTransferLockInput
- type EnableDomainTransferLockOutput
- type ExtraParam
- type GetContactReachabilityStatusInput
- type GetContactReachabilityStatusOutput
- type GetDomainDetailInput
- type GetDomainDetailOutput
- type GetDomainSuggestionsInput
- type GetDomainSuggestionsOutput
- type GetOperationDetailInput
- type GetOperationDetailOutput
- type ListDomainsInput
- type ListDomainsOutput
- type ListOperationsInput
- type ListOperationsOutput
- type ListTagsForDomainInput
- type ListTagsForDomainOutput
- type Nameserver
- type OperationSummary
- type RegisterDomainInput
- type RegisterDomainOutput
- type RenewDomainInput
- type RenewDomainOutput
- type ResendContactReachabilityEmailInput
- type ResendContactReachabilityEmailOutput
- type RetrieveDomainAuthCodeInput
- type RetrieveDomainAuthCodeOutput
- type Route53Domains
- func (c *Route53Domains) CheckDomainAvailability(input *CheckDomainAvailabilityInput) (*CheckDomainAvailabilityOutput, error)
- func (c *Route53Domains) CheckDomainAvailabilityRequest(input *CheckDomainAvailabilityInput) (req *request.Request, output *CheckDomainAvailabilityOutput)
- func (c *Route53Domains) DeleteTagsForDomain(input *DeleteTagsForDomainInput) (*DeleteTagsForDomainOutput, error)
- func (c *Route53Domains) DeleteTagsForDomainRequest(input *DeleteTagsForDomainInput) (req *request.Request, output *DeleteTagsForDomainOutput)
- func (c *Route53Domains) DisableDomainAutoRenew(input *DisableDomainAutoRenewInput) (*DisableDomainAutoRenewOutput, error)
- func (c *Route53Domains) DisableDomainAutoRenewRequest(input *DisableDomainAutoRenewInput) (req *request.Request, output *DisableDomainAutoRenewOutput)
- func (c *Route53Domains) DisableDomainTransferLock(input *DisableDomainTransferLockInput) (*DisableDomainTransferLockOutput, error)
- func (c *Route53Domains) DisableDomainTransferLockRequest(input *DisableDomainTransferLockInput) (req *request.Request, output *DisableDomainTransferLockOutput)
- func (c *Route53Domains) EnableDomainAutoRenew(input *EnableDomainAutoRenewInput) (*EnableDomainAutoRenewOutput, error)
- func (c *Route53Domains) EnableDomainAutoRenewRequest(input *EnableDomainAutoRenewInput) (req *request.Request, output *EnableDomainAutoRenewOutput)
- func (c *Route53Domains) EnableDomainTransferLock(input *EnableDomainTransferLockInput) (*EnableDomainTransferLockOutput, error)
- func (c *Route53Domains) EnableDomainTransferLockRequest(input *EnableDomainTransferLockInput) (req *request.Request, output *EnableDomainTransferLockOutput)
- func (c *Route53Domains) GetContactReachabilityStatus(input *GetContactReachabilityStatusInput) (*GetContactReachabilityStatusOutput, error)
- func (c *Route53Domains) GetContactReachabilityStatusRequest(input *GetContactReachabilityStatusInput) (req *request.Request, output *GetContactReachabilityStatusOutput)
- func (c *Route53Domains) GetDomainDetail(input *GetDomainDetailInput) (*GetDomainDetailOutput, error)
- func (c *Route53Domains) GetDomainDetailRequest(input *GetDomainDetailInput) (req *request.Request, output *GetDomainDetailOutput)
- func (c *Route53Domains) GetDomainSuggestions(input *GetDomainSuggestionsInput) (*GetDomainSuggestionsOutput, error)
- func (c *Route53Domains) GetDomainSuggestionsRequest(input *GetDomainSuggestionsInput) (req *request.Request, output *GetDomainSuggestionsOutput)
- func (c *Route53Domains) GetOperationDetail(input *GetOperationDetailInput) (*GetOperationDetailOutput, error)
- func (c *Route53Domains) GetOperationDetailRequest(input *GetOperationDetailInput) (req *request.Request, output *GetOperationDetailOutput)
- func (c *Route53Domains) ListDomains(input *ListDomainsInput) (*ListDomainsOutput, error)
- func (c *Route53Domains) ListDomainsPages(input *ListDomainsInput, ...) error
- func (c *Route53Domains) ListDomainsRequest(input *ListDomainsInput) (req *request.Request, output *ListDomainsOutput)
- func (c *Route53Domains) ListOperations(input *ListOperationsInput) (*ListOperationsOutput, error)
- func (c *Route53Domains) ListOperationsPages(input *ListOperationsInput, ...) error
- func (c *Route53Domains) ListOperationsRequest(input *ListOperationsInput) (req *request.Request, output *ListOperationsOutput)
- func (c *Route53Domains) ListTagsForDomain(input *ListTagsForDomainInput) (*ListTagsForDomainOutput, error)
- func (c *Route53Domains) ListTagsForDomainRequest(input *ListTagsForDomainInput) (req *request.Request, output *ListTagsForDomainOutput)
- func (c *Route53Domains) RegisterDomain(input *RegisterDomainInput) (*RegisterDomainOutput, error)
- func (c *Route53Domains) RegisterDomainRequest(input *RegisterDomainInput) (req *request.Request, output *RegisterDomainOutput)
- func (c *Route53Domains) RenewDomain(input *RenewDomainInput) (*RenewDomainOutput, error)
- func (c *Route53Domains) RenewDomainRequest(input *RenewDomainInput) (req *request.Request, output *RenewDomainOutput)
- func (c *Route53Domains) ResendContactReachabilityEmail(input *ResendContactReachabilityEmailInput) (*ResendContactReachabilityEmailOutput, error)
- func (c *Route53Domains) ResendContactReachabilityEmailRequest(input *ResendContactReachabilityEmailInput) (req *request.Request, output *ResendContactReachabilityEmailOutput)
- func (c *Route53Domains) RetrieveDomainAuthCode(input *RetrieveDomainAuthCodeInput) (*RetrieveDomainAuthCodeOutput, error)
- func (c *Route53Domains) RetrieveDomainAuthCodeRequest(input *RetrieveDomainAuthCodeInput) (req *request.Request, output *RetrieveDomainAuthCodeOutput)
- func (c *Route53Domains) TransferDomain(input *TransferDomainInput) (*TransferDomainOutput, error)
- func (c *Route53Domains) TransferDomainRequest(input *TransferDomainInput) (req *request.Request, output *TransferDomainOutput)
- func (c *Route53Domains) UpdateDomainContact(input *UpdateDomainContactInput) (*UpdateDomainContactOutput, error)
- func (c *Route53Domains) UpdateDomainContactPrivacy(input *UpdateDomainContactPrivacyInput) (*UpdateDomainContactPrivacyOutput, error)
- func (c *Route53Domains) UpdateDomainContactPrivacyRequest(input *UpdateDomainContactPrivacyInput) (req *request.Request, output *UpdateDomainContactPrivacyOutput)
- func (c *Route53Domains) UpdateDomainContactRequest(input *UpdateDomainContactInput) (req *request.Request, output *UpdateDomainContactOutput)
- func (c *Route53Domains) UpdateDomainNameservers(input *UpdateDomainNameserversInput) (*UpdateDomainNameserversOutput, error)
- func (c *Route53Domains) UpdateDomainNameserversRequest(input *UpdateDomainNameserversInput) (req *request.Request, output *UpdateDomainNameserversOutput)
- func (c *Route53Domains) UpdateTagsForDomain(input *UpdateTagsForDomainInput) (*UpdateTagsForDomainOutput, error)
- func (c *Route53Domains) UpdateTagsForDomainRequest(input *UpdateTagsForDomainInput) (req *request.Request, output *UpdateTagsForDomainOutput)
- func (c *Route53Domains) ViewBilling(input *ViewBillingInput) (*ViewBillingOutput, error)
- func (c *Route53Domains) ViewBillingRequest(input *ViewBillingInput) (req *request.Request, output *ViewBillingOutput)
- type Tag
- type TransferDomainInput
- type TransferDomainOutput
- type UpdateDomainContactInput
- type UpdateDomainContactOutput
- type UpdateDomainContactPrivacyInput
- type UpdateDomainContactPrivacyOutput
- type UpdateDomainNameserversInput
- type UpdateDomainNameserversOutput
- type UpdateTagsForDomainInput
- type UpdateTagsForDomainOutput
- type ViewBillingInput
- type ViewBillingOutput
Examples ¶
- Route53Domains.CheckDomainAvailability
- Route53Domains.DeleteTagsForDomain
- Route53Domains.DisableDomainAutoRenew
- Route53Domains.DisableDomainTransferLock
- Route53Domains.EnableDomainAutoRenew
- Route53Domains.EnableDomainTransferLock
- Route53Domains.GetContactReachabilityStatus
- Route53Domains.GetDomainDetail
- Route53Domains.GetDomainSuggestions
- Route53Domains.GetOperationDetail
- Route53Domains.ListDomains
- Route53Domains.ListOperations
- Route53Domains.ListTagsForDomain
- Route53Domains.RegisterDomain
- Route53Domains.RenewDomain
- Route53Domains.ResendContactReachabilityEmail
- Route53Domains.RetrieveDomainAuthCode
- Route53Domains.TransferDomain
- Route53Domains.UpdateDomainContact
- Route53Domains.UpdateDomainContactPrivacy
- Route53Domains.UpdateDomainNameservers
- Route53Domains.UpdateTagsForDomain
- Route53Domains.ViewBilling
Constants ¶
const ( // @enum ContactType ContactTypePerson = "PERSON" // @enum ContactType ContactTypeCompany = "COMPANY" // @enum ContactType ContactTypeAssociation = "ASSOCIATION" // @enum ContactType ContactTypePublicBody = "PUBLIC_BODY" // @enum ContactType ContactTypeReseller = "RESELLER" )
const ( // @enum CountryCode CountryCodeAd = "AD" // @enum CountryCode CountryCodeAe = "AE" // @enum CountryCode CountryCodeAf = "AF" // @enum CountryCode CountryCodeAg = "AG" // @enum CountryCode CountryCodeAi = "AI" // @enum CountryCode CountryCodeAl = "AL" // @enum CountryCode CountryCodeAm = "AM" // @enum CountryCode CountryCodeAn = "AN" // @enum CountryCode CountryCodeAo = "AO" // @enum CountryCode CountryCodeAq = "AQ" // @enum CountryCode CountryCodeAr = "AR" // @enum CountryCode CountryCodeAs = "AS" // @enum CountryCode CountryCodeAt = "AT" // @enum CountryCode CountryCodeAu = "AU" // @enum CountryCode CountryCodeAw = "AW" // @enum CountryCode CountryCodeAz = "AZ" // @enum CountryCode CountryCodeBa = "BA" // @enum CountryCode CountryCodeBb = "BB" // @enum CountryCode CountryCodeBd = "BD" // @enum CountryCode CountryCodeBe = "BE" // @enum CountryCode CountryCodeBf = "BF" // @enum CountryCode CountryCodeBg = "BG" // @enum CountryCode CountryCodeBh = "BH" // @enum CountryCode CountryCodeBi = "BI" // @enum CountryCode CountryCodeBj = "BJ" // @enum CountryCode CountryCodeBl = "BL" // @enum CountryCode CountryCodeBm = "BM" // @enum CountryCode CountryCodeBn = "BN" // @enum CountryCode CountryCodeBo = "BO" // @enum CountryCode CountryCodeBr = "BR" // @enum CountryCode CountryCodeBs = "BS" // @enum CountryCode CountryCodeBt = "BT" // @enum CountryCode CountryCodeBw = "BW" // @enum CountryCode CountryCodeBy = "BY" // @enum CountryCode CountryCodeBz = "BZ" // @enum CountryCode CountryCodeCa = "CA" // @enum CountryCode CountryCodeCc = "CC" // @enum CountryCode CountryCodeCd = "CD" // @enum CountryCode CountryCodeCf = "CF" // @enum CountryCode CountryCodeCg = "CG" // @enum CountryCode CountryCodeCh = "CH" // @enum CountryCode CountryCodeCi = "CI" // @enum CountryCode CountryCodeCk = "CK" // @enum CountryCode CountryCodeCl = "CL" // @enum CountryCode CountryCodeCm = "CM" // @enum CountryCode CountryCodeCn = "CN" // @enum CountryCode CountryCodeCo = "CO" // @enum CountryCode CountryCodeCr = "CR" // @enum CountryCode CountryCodeCu = "CU" // @enum CountryCode CountryCodeCv = "CV" // @enum CountryCode CountryCodeCx = "CX" // @enum CountryCode CountryCodeCy = "CY" // @enum CountryCode CountryCodeCz = "CZ" // @enum CountryCode CountryCodeDe = "DE" // @enum CountryCode CountryCodeDj = "DJ" // @enum CountryCode CountryCodeDk = "DK" // @enum CountryCode CountryCodeDm = "DM" // @enum CountryCode CountryCodeDo = "DO" // @enum CountryCode CountryCodeDz = "DZ" // @enum CountryCode CountryCodeEc = "EC" // @enum CountryCode CountryCodeEe = "EE" // @enum CountryCode CountryCodeEg = "EG" // @enum CountryCode CountryCodeEr = "ER" // @enum CountryCode CountryCodeEs = "ES" // @enum CountryCode CountryCodeEt = "ET" // @enum CountryCode CountryCodeFi = "FI" // @enum CountryCode CountryCodeFj = "FJ" // @enum CountryCode CountryCodeFk = "FK" // @enum CountryCode CountryCodeFm = "FM" // @enum CountryCode CountryCodeFo = "FO" // @enum CountryCode CountryCodeFr = "FR" // @enum CountryCode CountryCodeGa = "GA" // @enum CountryCode CountryCodeGb = "GB" // @enum CountryCode CountryCodeGd = "GD" // @enum CountryCode CountryCodeGe = "GE" // @enum CountryCode CountryCodeGh = "GH" // @enum CountryCode CountryCodeGi = "GI" // @enum CountryCode CountryCodeGl = "GL" // @enum CountryCode CountryCodeGm = "GM" // @enum CountryCode CountryCodeGn = "GN" // @enum CountryCode CountryCodeGq = "GQ" // @enum CountryCode CountryCodeGr = "GR" // @enum CountryCode CountryCodeGt = "GT" // @enum CountryCode CountryCodeGu = "GU" // @enum CountryCode CountryCodeGw = "GW" // @enum CountryCode CountryCodeGy = "GY" // @enum CountryCode CountryCodeHk = "HK" // @enum CountryCode CountryCodeHn = "HN" // @enum CountryCode CountryCodeHr = "HR" // @enum CountryCode CountryCodeHt = "HT" // @enum CountryCode CountryCodeHu = "HU" // @enum CountryCode CountryCodeId = "ID" // @enum CountryCode CountryCodeIe = "IE" // @enum CountryCode CountryCodeIl = "IL" // @enum CountryCode CountryCodeIm = "IM" // @enum CountryCode CountryCodeIn = "IN" // @enum CountryCode CountryCodeIq = "IQ" // @enum CountryCode CountryCodeIr = "IR" // @enum CountryCode CountryCodeIs = "IS" // @enum CountryCode CountryCodeIt = "IT" // @enum CountryCode CountryCodeJm = "JM" // @enum CountryCode CountryCodeJo = "JO" // @enum CountryCode CountryCodeJp = "JP" // @enum CountryCode CountryCodeKe = "KE" // @enum CountryCode CountryCodeKg = "KG" // @enum CountryCode CountryCodeKh = "KH" // @enum CountryCode CountryCodeKi = "KI" // @enum CountryCode CountryCodeKm = "KM" // @enum CountryCode CountryCodeKn = "KN" // @enum CountryCode CountryCodeKp = "KP" // @enum CountryCode CountryCodeKr = "KR" // @enum CountryCode CountryCodeKw = "KW" // @enum CountryCode CountryCodeKy = "KY" // @enum CountryCode CountryCodeKz = "KZ" // @enum CountryCode CountryCodeLa = "LA" // @enum CountryCode CountryCodeLb = "LB" // @enum CountryCode CountryCodeLc = "LC" // @enum CountryCode CountryCodeLi = "LI" // @enum CountryCode CountryCodeLk = "LK" // @enum CountryCode CountryCodeLr = "LR" // @enum CountryCode CountryCodeLs = "LS" // @enum CountryCode CountryCodeLt = "LT" // @enum CountryCode CountryCodeLu = "LU" // @enum CountryCode CountryCodeLv = "LV" // @enum CountryCode CountryCodeLy = "LY" // @enum CountryCode CountryCodeMa = "MA" // @enum CountryCode CountryCodeMc = "MC" // @enum CountryCode CountryCodeMd = "MD" // @enum CountryCode CountryCodeMe = "ME" // @enum CountryCode CountryCodeMf = "MF" // @enum CountryCode CountryCodeMg = "MG" // @enum CountryCode CountryCodeMh = "MH" // @enum CountryCode CountryCodeMk = "MK" // @enum CountryCode CountryCodeMl = "ML" // @enum CountryCode CountryCodeMm = "MM" // @enum CountryCode CountryCodeMn = "MN" // @enum CountryCode CountryCodeMo = "MO" // @enum CountryCode CountryCodeMp = "MP" // @enum CountryCode CountryCodeMr = "MR" // @enum CountryCode CountryCodeMs = "MS" // @enum CountryCode CountryCodeMt = "MT" // @enum CountryCode CountryCodeMu = "MU" // @enum CountryCode CountryCodeMv = "MV" // @enum CountryCode CountryCodeMw = "MW" // @enum CountryCode CountryCodeMx = "MX" // @enum CountryCode CountryCodeMy = "MY" // @enum CountryCode CountryCodeMz = "MZ" // @enum CountryCode CountryCodeNa = "NA" // @enum CountryCode CountryCodeNc = "NC" // @enum CountryCode CountryCodeNe = "NE" // @enum CountryCode CountryCodeNg = "NG" // @enum CountryCode CountryCodeNi = "NI" // @enum CountryCode CountryCodeNl = "NL" // @enum CountryCode CountryCodeNo = "NO" // @enum CountryCode CountryCodeNp = "NP" // @enum CountryCode CountryCodeNr = "NR" // @enum CountryCode CountryCodeNu = "NU" // @enum CountryCode CountryCodeNz = "NZ" // @enum CountryCode CountryCodeOm = "OM" // @enum CountryCode CountryCodePa = "PA" // @enum CountryCode CountryCodePe = "PE" // @enum CountryCode CountryCodePf = "PF" // @enum CountryCode CountryCodePg = "PG" // @enum CountryCode CountryCodePh = "PH" // @enum CountryCode CountryCodePk = "PK" // @enum CountryCode CountryCodePl = "PL" // @enum CountryCode CountryCodePm = "PM" // @enum CountryCode CountryCodePn = "PN" // @enum CountryCode CountryCodePr = "PR" // @enum CountryCode CountryCodePt = "PT" // @enum CountryCode CountryCodePw = "PW" // @enum CountryCode CountryCodePy = "PY" // @enum CountryCode CountryCodeQa = "QA" // @enum CountryCode CountryCodeRo = "RO" // @enum CountryCode CountryCodeRs = "RS" // @enum CountryCode CountryCodeRu = "RU" // @enum CountryCode CountryCodeRw = "RW" // @enum CountryCode CountryCodeSa = "SA" // @enum CountryCode CountryCodeSb = "SB" // @enum CountryCode CountryCodeSc = "SC" // @enum CountryCode CountryCodeSd = "SD" // @enum CountryCode CountryCodeSe = "SE" // @enum CountryCode CountryCodeSg = "SG" // @enum CountryCode CountryCodeSh = "SH" // @enum CountryCode CountryCodeSi = "SI" // @enum CountryCode CountryCodeSk = "SK" // @enum CountryCode CountryCodeSl = "SL" // @enum CountryCode CountryCodeSm = "SM" // @enum CountryCode CountryCodeSn = "SN" // @enum CountryCode CountryCodeSo = "SO" // @enum CountryCode CountryCodeSr = "SR" // @enum CountryCode CountryCodeSt = "ST" // @enum CountryCode CountryCodeSv = "SV" // @enum CountryCode CountryCodeSy = "SY" // @enum CountryCode CountryCodeSz = "SZ" // @enum CountryCode CountryCodeTc = "TC" // @enum CountryCode CountryCodeTd = "TD" // @enum CountryCode CountryCodeTg = "TG" // @enum CountryCode CountryCodeTh = "TH" // @enum CountryCode CountryCodeTj = "TJ" // @enum CountryCode CountryCodeTk = "TK" // @enum CountryCode CountryCodeTl = "TL" // @enum CountryCode CountryCodeTm = "TM" // @enum CountryCode CountryCodeTn = "TN" // @enum CountryCode CountryCodeTo = "TO" // @enum CountryCode CountryCodeTr = "TR" // @enum CountryCode CountryCodeTt = "TT" // @enum CountryCode CountryCodeTv = "TV" // @enum CountryCode CountryCodeTw = "TW" // @enum CountryCode CountryCodeTz = "TZ" // @enum CountryCode CountryCodeUa = "UA" // @enum CountryCode CountryCodeUg = "UG" // @enum CountryCode CountryCodeUs = "US" // @enum CountryCode CountryCodeUy = "UY" // @enum CountryCode CountryCodeUz = "UZ" // @enum CountryCode CountryCodeVa = "VA" // @enum CountryCode CountryCodeVc = "VC" // @enum CountryCode CountryCodeVe = "VE" // @enum CountryCode CountryCodeVg = "VG" // @enum CountryCode CountryCodeVi = "VI" // @enum CountryCode CountryCodeVn = "VN" // @enum CountryCode CountryCodeVu = "VU" // @enum CountryCode CountryCodeWf = "WF" // @enum CountryCode CountryCodeWs = "WS" // @enum CountryCode CountryCodeYe = "YE" // @enum CountryCode CountryCodeYt = "YT" // @enum CountryCode CountryCodeZa = "ZA" // @enum CountryCode CountryCodeZm = "ZM" // @enum CountryCode CountryCodeZw = "ZW" )
const ( // @enum DomainAvailability DomainAvailabilityAvailable = "AVAILABLE" // @enum DomainAvailability DomainAvailabilityAvailableReserved = "AVAILABLE_RESERVED" // @enum DomainAvailability DomainAvailabilityAvailablePreorder = "AVAILABLE_PREORDER" DomainAvailabilityUnavailable = "UNAVAILABLE" DomainAvailabilityUnavailablePremium = "UNAVAILABLE_PREMIUM" DomainAvailabilityUnavailableRestricted = "UNAVAILABLE_RESTRICTED" // @enum DomainAvailability DomainAvailabilityReserved = "RESERVED" // @enum DomainAvailability DomainAvailabilityDontKnow = "DONT_KNOW" )
const ( // @enum ExtraParamName ExtraParamNameDunsNumber = "DUNS_NUMBER" // @enum ExtraParamName ExtraParamNameBrandNumber = "BRAND_NUMBER" // @enum ExtraParamName ExtraParamNameBirthDepartment = "BIRTH_DEPARTMENT" // @enum ExtraParamName ExtraParamNameBirthDateInYyyyMmDd = "BIRTH_DATE_IN_YYYY_MM_DD" // @enum ExtraParamName ExtraParamNameBirthCountry = "BIRTH_COUNTRY" // @enum ExtraParamName ExtraParamNameBirthCity = "BIRTH_CITY" // @enum ExtraParamName ExtraParamNameDocumentNumber = "DOCUMENT_NUMBER" // @enum ExtraParamName ExtraParamNameAuIdNumber = "AU_ID_NUMBER" // @enum ExtraParamName ExtraParamNameAuIdType = "AU_ID_TYPE" // @enum ExtraParamName ExtraParamNameCaLegalType = "CA_LEGAL_TYPE" // @enum ExtraParamName ExtraParamNameCaBusinessEntityType = "CA_BUSINESS_ENTITY_TYPE" // @enum ExtraParamName ExtraParamNameEsIdentification = "ES_IDENTIFICATION" // @enum ExtraParamName ExtraParamNameEsIdentificationType = "ES_IDENTIFICATION_TYPE" // @enum ExtraParamName ExtraParamNameEsLegalForm = "ES_LEGAL_FORM" // @enum ExtraParamName ExtraParamNameFiBusinessNumber = "FI_BUSINESS_NUMBER" // @enum ExtraParamName ExtraParamNameFiIdNumber = "FI_ID_NUMBER" // @enum ExtraParamName ExtraParamNameItPin = "IT_PIN" // @enum ExtraParamName ExtraParamNameRuPassportData = "RU_PASSPORT_DATA" // @enum ExtraParamName ExtraParamNameSeIdNumber = "SE_ID_NUMBER" // @enum ExtraParamName ExtraParamNameSgIdNumber = "SG_ID_NUMBER" // @enum ExtraParamName ExtraParamNameVatNumber = "VAT_NUMBER" )
const ( // @enum OperationStatus OperationStatusSubmitted = "SUBMITTED" // @enum OperationStatus OperationStatusInProgress = "IN_PROGRESS" // @enum OperationStatus OperationStatusError = "ERROR" // @enum OperationStatus OperationStatusSuccessful = "SUCCESSFUL" // @enum OperationStatus OperationStatusFailed = "FAILED" )
const ( // @enum OperationType OperationTypeRegisterDomain = "REGISTER_DOMAIN" // @enum OperationType OperationTypeDeleteDomain = "DELETE_DOMAIN" // @enum OperationType OperationTypeTransferInDomain = "TRANSFER_IN_DOMAIN" // @enum OperationType OperationTypeUpdateDomainContact = "UPDATE_DOMAIN_CONTACT" // @enum OperationType OperationTypeUpdateNameserver = "UPDATE_NAMESERVER" // @enum OperationType OperationTypeChangePrivacyProtection = "CHANGE_PRIVACY_PROTECTION" // @enum OperationType OperationTypeDomainLock = "DOMAIN_LOCK" )
const ( // @enum ReachabilityStatus ReachabilityStatusPending = "PENDING" // @enum ReachabilityStatus ReachabilityStatusDone = "DONE" // @enum ReachabilityStatus ReachabilityStatusExpired = "EXPIRED" )
const ServiceName = "route53domains"
A ServiceName is the name of the service the client will make API calls to.
Variables ¶
This section is empty.
Functions ¶
This section is empty.
Types ¶
type BillingRecord ¶
type BillingRecord struct { // The date that the operation was billed, in Unix format. // // Type: Double BillDate *time.Time `type:"timestamp" timestampFormat:"unix"` // The name of a domain. // // Type: String DomainName *string `type:"string"` // The ID of the invoice that is associated with the billing record. // // Type: String InvoiceId *string `type:"string"` // The operation that you were charged for. // // Type: String // // Valid values: REGISTER_DOMAIN TRANSFER_IN_DOMAIN RENEW_DOMAIN CHANGE_DOMAIN_OWNER Operation *string `type:"string" enum:"OperationType"` // The price that you were charged for the operation, in US dollars. // // Type: Double // // Example value: 12.0 Price *float64 `type:"double"` // contains filtered or unexported fields }
func (BillingRecord) GoString ¶
func (s BillingRecord) GoString() string
GoString returns the string representation
func (BillingRecord) String ¶
func (s BillingRecord) String() string
String returns the string representation
type CheckDomainAvailabilityInput ¶
type CheckDomainAvailabilityInput struct { // The name of a domain. // // Type: String // // Default: None // // Constraints: The domain name can contain only the letters a through z, the // numbers 0 through 9, and hyphen (-). Internationalized Domain Names are not // supported. // // Required: Yes DomainName *string `type:"string" required:"true"` // Reserved for future use. IdnLangCode *string `type:"string"` // contains filtered or unexported fields }
The CheckDomainAvailability request contains the following elements.
func (CheckDomainAvailabilityInput) GoString ¶
func (s CheckDomainAvailabilityInput) GoString() string
GoString returns the string representation
func (CheckDomainAvailabilityInput) String ¶
func (s CheckDomainAvailabilityInput) String() string
String returns the string representation
func (*CheckDomainAvailabilityInput) Validate ¶
func (s *CheckDomainAvailabilityInput) Validate() error
Validate inspects the fields of the type to determine if they are valid.
type CheckDomainAvailabilityOutput ¶
type CheckDomainAvailabilityOutput struct { // Whether the domain name is available for registering. // // You can only register domains designated as AVAILABLE. // // Type: String // // Valid values: // // AVAILABLE – The domain name is available. AVAILABLE_RESERVED – The domain // name is reserved under specific conditions. AVAILABLE_PREORDER – The domain // name is available and can be preordered. UNAVAILABLE – The domain name is // not available. UNAVAILABLE_PREMIUM – The domain name is not available. UNAVAILABLE_RESTRICTED // – The domain name is forbidden. RESERVED – The domain name has been reserved // for another person or organization. DONT_KNOW – The TLD registry didn't reply // with a definitive answer about whether the domain name is available. Amazon // Route 53 can return this response for a variety of reasons, for example, // the registry is performing maintenance. Try again later. Availability *string `type:"string" required:"true" enum:"DomainAvailability"` // contains filtered or unexported fields }
The CheckDomainAvailability response includes the following elements.
func (CheckDomainAvailabilityOutput) GoString ¶
func (s CheckDomainAvailabilityOutput) GoString() string
GoString returns the string representation
func (CheckDomainAvailabilityOutput) String ¶
func (s CheckDomainAvailabilityOutput) String() string
String returns the string representation
type ContactDetail ¶
type ContactDetail struct { // First line of the contact's address. // // Type: String // // Default: None // // Constraints: Maximum 255 characters. // // Parents: RegistrantContact, AdminContact, TechContact // // Required: Yes AddressLine1 *string `type:"string"` // Second line of contact's address, if any. // // Type: String // // Default: None // // Constraints: Maximum 255 characters. // // Parents: RegistrantContact, AdminContact, TechContact // // Required: No AddressLine2 *string `type:"string"` // The city of the contact's address. // // Type: String // // Default: None // // Constraints: Maximum 255 characters. // // Parents: RegistrantContact, AdminContact, TechContact // // Required: Yes City *string `type:"string"` // Indicates whether the contact is a person, company, association, or public // organization. If you choose an option other than PERSON, you must enter an // organization name, and you can't enable privacy protection for the contact. // // Type: String // // Default: None // // Constraints: Maximum 255 characters. // // Valid values: PERSON | COMPANY | ASSOCIATION | PUBLIC_BODY // // Parents: RegistrantContact, AdminContact, TechContact // // Required: Yes ContactType *string `type:"string" enum:"ContactType"` // Code for the country of the contact's address. // // Type: String // // Default: None // // Constraints: Maximum 255 characters. // // Parents: RegistrantContact, AdminContact, TechContact // // Required: Yes CountryCode *string `type:"string" enum:"CountryCode"` // Email address of the contact. // // Type: String // // Default: None // // Constraints: Maximum 254 characters. // // Parents: RegistrantContact, AdminContact, TechContact // // Required: Yes Email *string `type:"string"` // A list of name-value pairs for parameters required by certain top-level domains. // // Type: Complex // // Default: None // // Parents: RegistrantContact, AdminContact, TechContact // // Children: Name, Value // // Required: No ExtraParams []*ExtraParam `type:"list"` // Fax number of the contact. // // Type: String // // Default: None // // Constraints: Phone number must be specified in the format "+[country dialing // code].[number including any area code]". For example, a US phone number might // appear as "+1.1234567890". // // Parents: RegistrantContact, AdminContact, TechContact // // Required: No Fax *string `type:"string"` // First name of contact. // // Type: String // // Default: None // // Constraints: Maximum 255 characters. // // Parents: RegistrantContact, AdminContact, TechContact // // Required: Yes FirstName *string `type:"string"` // Last name of contact. // // Type: String // // Default: None // // Constraints: Maximum 255 characters. // // Parents: RegistrantContact, AdminContact, TechContact // // Required: Yes LastName *string `type:"string"` // Name of the organization for contact types other than PERSON. // // Type: String // // Default: None // // Constraints: Maximum 255 characters. Contact type must not be PERSON. // // Parents: RegistrantContact, AdminContact, TechContact // // Required: No OrganizationName *string `type:"string"` // The phone number of the contact. // // Type: String // // Default: None // // Constraints: Phone number must be specified in the format "+[country dialing // code].[number including any area code>]". For example, a US phone number // might appear as "+1.1234567890". // // Parents: RegistrantContact, AdminContact, TechContact // // Required: Yes PhoneNumber *string `type:"string"` // The state or province of the contact's city. // // Type: String // // Default: None // // Constraints: Maximum 255 characters. // // Parents: RegistrantContact, AdminContact, TechContact // // Required: No State *string `type:"string"` // The zip or postal code of the contact's address. // // Type: String // // Default: None // // Constraints: Maximum 255 characters. // // Parents: RegistrantContact, AdminContact, TechContact // // Required: No ZipCode *string `type:"string"` // contains filtered or unexported fields }
ContactDetail includes the following elements.
func (ContactDetail) GoString ¶
func (s ContactDetail) GoString() string
GoString returns the string representation
func (ContactDetail) String ¶
func (s ContactDetail) String() string
String returns the string representation
func (*ContactDetail) Validate ¶
func (s *ContactDetail) Validate() error
Validate inspects the fields of the type to determine if they are valid.
type DeleteTagsForDomainInput ¶
type DeleteTagsForDomainInput struct { // The domain for which you want to delete one or more tags. // // The name of a domain. // // Type: String // // Default: None // // Constraints: The domain name can contain only the letters a through z, the // numbers 0 through 9, and hyphen (-). Hyphens are allowed only when they're // surrounded by letters, numbers, or other hyphens. You can't specify a hyphen // at the beginning or end of a label. To specify an Internationalized Domain // Name, you must convert the name to Punycode. // // Required: Yes DomainName *string `type:"string" required:"true"` // A list of tag keys to delete. // // Type: A list that contains the keys of the tags that you want to delete. // // Default: None // // Required: No // // '> TagsToDelete []*string `type:"list" required:"true"` // contains filtered or unexported fields }
The DeleteTagsForDomainRequest includes the following elements.
func (DeleteTagsForDomainInput) GoString ¶
func (s DeleteTagsForDomainInput) GoString() string
GoString returns the string representation
func (DeleteTagsForDomainInput) String ¶
func (s DeleteTagsForDomainInput) String() string
String returns the string representation
func (*DeleteTagsForDomainInput) Validate ¶
func (s *DeleteTagsForDomainInput) Validate() error
Validate inspects the fields of the type to determine if they are valid.
type DeleteTagsForDomainOutput ¶
type DeleteTagsForDomainOutput struct {
// contains filtered or unexported fields
}
func (DeleteTagsForDomainOutput) GoString ¶
func (s DeleteTagsForDomainOutput) GoString() string
GoString returns the string representation
func (DeleteTagsForDomainOutput) String ¶
func (s DeleteTagsForDomainOutput) String() string
String returns the string representation
type DisableDomainAutoRenewInput ¶
type DisableDomainAutoRenewInput struct { DomainName *string `type:"string" required:"true"` // contains filtered or unexported fields }
func (DisableDomainAutoRenewInput) GoString ¶
func (s DisableDomainAutoRenewInput) GoString() string
GoString returns the string representation
func (DisableDomainAutoRenewInput) String ¶
func (s DisableDomainAutoRenewInput) String() string
String returns the string representation
func (*DisableDomainAutoRenewInput) Validate ¶
func (s *DisableDomainAutoRenewInput) Validate() error
Validate inspects the fields of the type to determine if they are valid.
type DisableDomainAutoRenewOutput ¶
type DisableDomainAutoRenewOutput struct {
// contains filtered or unexported fields
}
func (DisableDomainAutoRenewOutput) GoString ¶
func (s DisableDomainAutoRenewOutput) GoString() string
GoString returns the string representation
func (DisableDomainAutoRenewOutput) String ¶
func (s DisableDomainAutoRenewOutput) String() string
String returns the string representation
type DisableDomainTransferLockInput ¶
type DisableDomainTransferLockInput struct { // The name of a domain. // // Type: String // // Default: None // // Constraints: The domain name can contain only the letters a through z, the // numbers 0 through 9, and hyphen (-). Internationalized Domain Names are not // supported. // // Required: Yes DomainName *string `type:"string" required:"true"` // contains filtered or unexported fields }
The DisableDomainTransferLock request includes the following element.
func (DisableDomainTransferLockInput) GoString ¶
func (s DisableDomainTransferLockInput) GoString() string
GoString returns the string representation
func (DisableDomainTransferLockInput) String ¶
func (s DisableDomainTransferLockInput) String() string
String returns the string representation
func (*DisableDomainTransferLockInput) Validate ¶
func (s *DisableDomainTransferLockInput) Validate() error
Validate inspects the fields of the type to determine if they are valid.
type DisableDomainTransferLockOutput ¶
type DisableDomainTransferLockOutput struct { // Identifier for tracking the progress of the request. To use this ID to query // the operation status, use GetOperationDetail. // // Type: String // // Default: None // // Constraints: Maximum 255 characters. OperationId *string `type:"string" required:"true"` // contains filtered or unexported fields }
The DisableDomainTransferLock response includes the following element.
func (DisableDomainTransferLockOutput) GoString ¶
func (s DisableDomainTransferLockOutput) GoString() string
GoString returns the string representation
func (DisableDomainTransferLockOutput) String ¶
func (s DisableDomainTransferLockOutput) String() string
String returns the string representation
type DomainSuggestion ¶
type DomainSuggestion struct { Availability *string `type:"string"` DomainName *string `type:"string"` // contains filtered or unexported fields }
func (DomainSuggestion) GoString ¶
func (s DomainSuggestion) GoString() string
GoString returns the string representation
func (DomainSuggestion) String ¶
func (s DomainSuggestion) String() string
String returns the string representation
type DomainSummary ¶
type DomainSummary struct { // Indicates whether the domain is automatically renewed upon expiration. // // Type: Boolean // // Valid values: True | False AutoRenew *bool `type:"boolean"` // The name of a domain. // // Type: String DomainName *string `type:"string" required:"true"` // Expiration date of the domain in Coordinated Universal Time (UTC). // // Type: Long Expiry *time.Time `type:"timestamp" timestampFormat:"unix"` // Indicates whether a domain is locked from unauthorized transfer to another // party. // // Type: Boolean // // Valid values: True | False TransferLock *bool `type:"boolean"` // contains filtered or unexported fields }
func (DomainSummary) GoString ¶
func (s DomainSummary) GoString() string
GoString returns the string representation
func (DomainSummary) String ¶
func (s DomainSummary) String() string
String returns the string representation
type EnableDomainAutoRenewInput ¶
type EnableDomainAutoRenewInput struct { DomainName *string `type:"string" required:"true"` // contains filtered or unexported fields }
func (EnableDomainAutoRenewInput) GoString ¶
func (s EnableDomainAutoRenewInput) GoString() string
GoString returns the string representation
func (EnableDomainAutoRenewInput) String ¶
func (s EnableDomainAutoRenewInput) String() string
String returns the string representation
func (*EnableDomainAutoRenewInput) Validate ¶
func (s *EnableDomainAutoRenewInput) Validate() error
Validate inspects the fields of the type to determine if they are valid.
type EnableDomainAutoRenewOutput ¶
type EnableDomainAutoRenewOutput struct {
// contains filtered or unexported fields
}
func (EnableDomainAutoRenewOutput) GoString ¶
func (s EnableDomainAutoRenewOutput) GoString() string
GoString returns the string representation
func (EnableDomainAutoRenewOutput) String ¶
func (s EnableDomainAutoRenewOutput) String() string
String returns the string representation
type EnableDomainTransferLockInput ¶
type EnableDomainTransferLockInput struct { // The name of a domain. // // Type: String // // Default: None // // Constraints: The domain name can contain only the letters a through z, the // numbers 0 through 9, and hyphen (-). Internationalized Domain Names are not // supported. // // Required: Yes DomainName *string `type:"string" required:"true"` // contains filtered or unexported fields }
The EnableDomainTransferLock request includes the following element.
func (EnableDomainTransferLockInput) GoString ¶
func (s EnableDomainTransferLockInput) GoString() string
GoString returns the string representation
func (EnableDomainTransferLockInput) String ¶
func (s EnableDomainTransferLockInput) String() string
String returns the string representation
func (*EnableDomainTransferLockInput) Validate ¶
func (s *EnableDomainTransferLockInput) Validate() error
Validate inspects the fields of the type to determine if they are valid.
type EnableDomainTransferLockOutput ¶
type EnableDomainTransferLockOutput struct { // Identifier for tracking the progress of the request. To use this ID to query // the operation status, use GetOperationDetail. // // Type: String // // Default: None // // Constraints: Maximum 255 characters. OperationId *string `type:"string" required:"true"` // contains filtered or unexported fields }
The EnableDomainTransferLock response includes the following elements.
func (EnableDomainTransferLockOutput) GoString ¶
func (s EnableDomainTransferLockOutput) GoString() string
GoString returns the string representation
func (EnableDomainTransferLockOutput) String ¶
func (s EnableDomainTransferLockOutput) String() string
String returns the string representation
type ExtraParam ¶
type ExtraParam struct { // Name of the additional parameter required by the top-level domain. // // Type: String // // Default: None // // Valid values: DUNS_NUMBER | BRAND_NUMBER | BIRTH_DEPARTMENT | BIRTH_DATE_IN_YYYY_MM_DD // | BIRTH_COUNTRY | BIRTH_CITY | DOCUMENT_NUMBER | AU_ID_NUMBER | AU_ID_TYPE // | CA_LEGAL_TYPE | CA_BUSINESS_ENTITY_TYPE |ES_IDENTIFICATION | ES_IDENTIFICATION_TYPE // | ES_LEGAL_FORM | FI_BUSINESS_NUMBER | FI_ID_NUMBER | IT_PIN | RU_PASSPORT_DATA // | SE_ID_NUMBER | SG_ID_NUMBER | VAT_NUMBER // // Parent: ExtraParams // // Required: Yes Name *string `type:"string" required:"true" enum:"ExtraParamName"` // Values corresponding to the additional parameter names required by some top-level // domains. // // Type: String // // Default: None // // Constraints: Maximum 2048 characters. // // Parent: ExtraParams // // Required: Yes Value *string `type:"string" required:"true"` // contains filtered or unexported fields }
ExtraParam includes the following elements.
func (ExtraParam) GoString ¶
func (s ExtraParam) GoString() string
GoString returns the string representation
func (ExtraParam) String ¶
func (s ExtraParam) String() string
String returns the string representation
func (*ExtraParam) Validate ¶
func (s *ExtraParam) Validate() error
Validate inspects the fields of the type to determine if they are valid.
type GetContactReachabilityStatusInput ¶
type GetContactReachabilityStatusInput struct { // The name of the domain for which you want to know whether the registrant // contact has confirmed that the email address is valid. // // Type: String // // Default: None // // Required: Yes DomainName *string `locationName:"domainName" type:"string"` // contains filtered or unexported fields }
func (GetContactReachabilityStatusInput) GoString ¶
func (s GetContactReachabilityStatusInput) GoString() string
GoString returns the string representation
func (GetContactReachabilityStatusInput) String ¶
func (s GetContactReachabilityStatusInput) String() string
String returns the string representation
type GetContactReachabilityStatusOutput ¶
type GetContactReachabilityStatusOutput struct { // The domain name for which you requested the reachability status. DomainName *string `locationName:"domainName" type:"string"` // Whether the registrant contact has responded. PENDING indicates that we sent // the confirmation email and haven't received a response yet, DONE indicates // that we sent the email and got confirmation from the registrant contact, // and EXPIRED indicates that the time limit expired before the registrant contact // responded. // // Type: String // // Valid values: PENDING, DONE, EXPIRED Status *string `locationName:"status" type:"string" enum:"ReachabilityStatus"` // contains filtered or unexported fields }
func (GetContactReachabilityStatusOutput) GoString ¶
func (s GetContactReachabilityStatusOutput) GoString() string
GoString returns the string representation
func (GetContactReachabilityStatusOutput) String ¶
func (s GetContactReachabilityStatusOutput) String() string
String returns the string representation
type GetDomainDetailInput ¶
type GetDomainDetailInput struct { // The name of a domain. // // Type: String // // Default: None // // Constraints: The domain name can contain only the letters a through z, the // numbers 0 through 9, and hyphen (-). Internationalized Domain Names are not // supported. // // Required: Yes DomainName *string `type:"string" required:"true"` // contains filtered or unexported fields }
The GetDomainDetail request includes the following element.
func (GetDomainDetailInput) GoString ¶
func (s GetDomainDetailInput) GoString() string
GoString returns the string representation
func (GetDomainDetailInput) String ¶
func (s GetDomainDetailInput) String() string
String returns the string representation
func (*GetDomainDetailInput) Validate ¶
func (s *GetDomainDetailInput) Validate() error
Validate inspects the fields of the type to determine if they are valid.
type GetDomainDetailOutput ¶
type GetDomainDetailOutput struct { // Email address to contact to report incorrect contact information for a domain, // to report that the domain is being used to send spam, to report that someone // is cybersquatting on a domain name, or report some other type of abuse. // // Type: String AbuseContactEmail *string `type:"string"` // Phone number for reporting abuse. // // Type: String AbuseContactPhone *string `type:"string"` // Provides details about the domain administrative contact. // // Type: Complex // // Children: FirstName, MiddleName, LastName, ContactType, OrganizationName, // AddressLine1, AddressLine2, City, State, CountryCode, ZipCode, PhoneNumber, // Email, Fax, ExtraParams AdminContact *ContactDetail `type:"structure" required:"true"` // Specifies whether contact information for the admin contact is concealed // from WHOIS queries. If the value is true, WHOIS ("who is") queries will return // contact information for our registrar partner, Gandi, instead of the contact // information that you enter. // // Type: Boolean AdminPrivacy *bool `type:"boolean"` // Specifies whether the domain registration is set to renew automatically. // // Type: Boolean AutoRenew *bool `type:"boolean"` // The date when the domain was created as found in the response to a WHOIS // query. The date format is Unix time. CreationDate *time.Time `type:"timestamp" timestampFormat:"unix"` // Reserved for future use. DnsSec *string `type:"string"` // The name of a domain. // // Type: String DomainName *string `type:"string" required:"true"` // The date when the registration for the domain is set to expire. The date // format is Unix time. ExpirationDate *time.Time `type:"timestamp" timestampFormat:"unix"` // The name of the domain. // // Type: String Nameservers []*Nameserver `type:"list" required:"true"` // Provides details about the domain registrant. // // Type: Complex // // Children: FirstName, MiddleName, LastName, ContactType, OrganizationName, // AddressLine1, AddressLine2, City, State, CountryCode, ZipCode, PhoneNumber, // Email, Fax, ExtraParams RegistrantContact *ContactDetail `type:"structure" required:"true"` // Specifies whether contact information for the registrant contact is concealed // from WHOIS queries. If the value is true, WHOIS ("who is") queries will return // contact information for our registrar partner, Gandi, instead of the contact // information that you enter. // // Type: Boolean RegistrantPrivacy *bool `type:"boolean"` // Name of the registrar of the domain as identified in the registry. Amazon // Route 53 domains are registered by registrar Gandi. The value is "GANDI SAS". // // Type: String RegistrarName *string `type:"string"` // Web address of the registrar. // // Type: String RegistrarUrl *string `type:"string"` // Reserved for future use. RegistryDomainId *string `type:"string"` // Reseller of the domain. Domains registered or transferred using Amazon Route // 53 domains will have "Amazon" as the reseller. // // Type: String Reseller *string `type:"string"` // An array of domain name status codes, also known as Extensible Provisioning // Protocol (EPP) status codes. // // ICANN, the organization that maintains a central database of domain names, // has developed a set of domain name status codes that tell you the status // of a variety of operations on a domain name, for example, registering a domain // name, transferring a domain name to another registrar, renewing the registration // for a domain name, and so on. All registrars use this same set of status // codes. // // For a current list of domain name status codes and an explanation of what // each code means, go to the ICANN website (https://www.icann.org/) and search // for epp status codes. (Search on the ICANN website; web searches sometimes // return an old version of the document.) // // Type: Array of String StatusList []*string `type:"list"` // Provides details about the domain technical contact. // // Type: Complex // // Children: FirstName, MiddleName, LastName, ContactType, OrganizationName, // AddressLine1, AddressLine2, City, State, CountryCode, ZipCode, PhoneNumber, // Email, Fax, ExtraParams TechContact *ContactDetail `type:"structure" required:"true"` // Specifies whether contact information for the tech contact is concealed from // WHOIS queries. If the value is true, WHOIS ("who is") queries will return // contact information for our registrar partner, Gandi, instead of the contact // information that you enter. // // Type: Boolean TechPrivacy *bool `type:"boolean"` // The last updated date of the domain as found in the response to a WHOIS query. // The date format is Unix time. UpdatedDate *time.Time `type:"timestamp" timestampFormat:"unix"` // The fully qualified name of the WHOIS server that can answer the WHOIS query // for the domain. // // Type: String WhoIsServer *string `type:"string"` // contains filtered or unexported fields }
The GetDomainDetail response includes the following elements.
func (GetDomainDetailOutput) GoString ¶
func (s GetDomainDetailOutput) GoString() string
GoString returns the string representation
func (GetDomainDetailOutput) String ¶
func (s GetDomainDetailOutput) String() string
String returns the string representation
type GetDomainSuggestionsInput ¶
type GetDomainSuggestionsInput struct { DomainName *string `type:"string" required:"true"` OnlyAvailable *bool `type:"boolean" required:"true"` SuggestionCount *int64 `type:"integer" required:"true"` // contains filtered or unexported fields }
func (GetDomainSuggestionsInput) GoString ¶
func (s GetDomainSuggestionsInput) GoString() string
GoString returns the string representation
func (GetDomainSuggestionsInput) String ¶
func (s GetDomainSuggestionsInput) String() string
String returns the string representation
func (*GetDomainSuggestionsInput) Validate ¶
func (s *GetDomainSuggestionsInput) Validate() error
Validate inspects the fields of the type to determine if they are valid.
type GetDomainSuggestionsOutput ¶
type GetDomainSuggestionsOutput struct { SuggestionsList []*DomainSuggestion `type:"list"` // contains filtered or unexported fields }
func (GetDomainSuggestionsOutput) GoString ¶
func (s GetDomainSuggestionsOutput) GoString() string
GoString returns the string representation
func (GetDomainSuggestionsOutput) String ¶
func (s GetDomainSuggestionsOutput) String() string
String returns the string representation
type GetOperationDetailInput ¶
type GetOperationDetailInput struct { // The identifier for the operation for which you want to get the status. Amazon // Route 53 returned the identifier in the response to the original request. // // Type: String // // Default: None // // Required: Yes OperationId *string `type:"string" required:"true"` // contains filtered or unexported fields }
The GetOperationDetail request includes the following element.
func (GetOperationDetailInput) GoString ¶
func (s GetOperationDetailInput) GoString() string
GoString returns the string representation
func (GetOperationDetailInput) String ¶
func (s GetOperationDetailInput) String() string
String returns the string representation
func (*GetOperationDetailInput) Validate ¶
func (s *GetOperationDetailInput) Validate() error
Validate inspects the fields of the type to determine if they are valid.
type GetOperationDetailOutput ¶
type GetOperationDetailOutput struct { // The name of a domain. // // Type: String DomainName *string `type:"string"` // Detailed information on the status including possible errors. // // Type: String Message *string `type:"string"` // The identifier for the operation. // // Type: String OperationId *string `type:"string"` // The current status of the requested operation in the system. // // Type: String Status *string `type:"string" enum:"OperationStatus"` // The date when the request was submitted. SubmittedDate *time.Time `type:"timestamp" timestampFormat:"unix"` // The type of operation that was requested. // // Type: String Type *string `type:"string" enum:"OperationType"` // contains filtered or unexported fields }
The GetOperationDetail response includes the following elements.
func (GetOperationDetailOutput) GoString ¶
func (s GetOperationDetailOutput) GoString() string
GoString returns the string representation
func (GetOperationDetailOutput) String ¶
func (s GetOperationDetailOutput) String() string
String returns the string representation
type ListDomainsInput ¶
type ListDomainsInput struct { // For an initial request for a list of domains, omit this element. If the number // of domains that are associated with the current AWS account is greater than // the value that you specified for MaxItems, you can use Marker to return additional // domains. Get the value of NextPageMarker from the previous response, and // submit another request that includes the value of NextPageMarker in the Marker // element. // // Type: String // // Default: None // // Constraints: The marker must match the value specified in the previous request. // // Required: No Marker *string `type:"string"` // Number of domains to be returned. // // Type: Integer // // Default: 20 // // Constraints: A numeral between 1 and 100. // // Required: No MaxItems *int64 `type:"integer"` // contains filtered or unexported fields }
The ListDomains request includes the following elements.
func (ListDomainsInput) GoString ¶
func (s ListDomainsInput) GoString() string
GoString returns the string representation
func (ListDomainsInput) String ¶
func (s ListDomainsInput) String() string
String returns the string representation
type ListDomainsOutput ¶
type ListDomainsOutput struct { // A summary of domains. // // Type: Complex type containing a list of domain summaries. // // Children: AutoRenew, DomainName, Expiry, TransferLock Domains []*DomainSummary `type:"list" required:"true"` // If there are more domains than you specified for MaxItems in the request, // submit another request and include the value of NextPageMarker in the value // of Marker. // // Type: String // // Parent: Operations NextPageMarker *string `type:"string"` // contains filtered or unexported fields }
The ListDomains response includes the following elements.
func (ListDomainsOutput) GoString ¶
func (s ListDomainsOutput) GoString() string
GoString returns the string representation
func (ListDomainsOutput) String ¶
func (s ListDomainsOutput) String() string
String returns the string representation
type ListOperationsInput ¶
type ListOperationsInput struct { // For an initial request for a list of operations, omit this element. If the // number of operations that are not yet complete is greater than the value // that you specified for MaxItems, you can use Marker to return additional // operations. Get the value of NextPageMarker from the previous response, and // submit another request that includes the value of NextPageMarker in the Marker // element. // // Type: String // // Default: None // // Required: No Marker *string `type:"string"` // Number of domains to be returned. // // Type: Integer // // Default: 20 // // Constraints: A value between 1 and 100. // // Required: No MaxItems *int64 `type:"integer"` // contains filtered or unexported fields }
The ListOperations request includes the following elements.
func (ListOperationsInput) GoString ¶
func (s ListOperationsInput) GoString() string
GoString returns the string representation
func (ListOperationsInput) String ¶
func (s ListOperationsInput) String() string
String returns the string representation
type ListOperationsOutput ¶
type ListOperationsOutput struct { // If there are more operations than you specified for MaxItems in the request, // submit another request and include the value of NextPageMarker in the value // of Marker. // // Type: String // // Parent: Operations NextPageMarker *string `type:"string"` // Lists summaries of the operations. // // Type: Complex type containing a list of operation summaries // // Children: OperationId, Status, SubmittedDate, Type Operations []*OperationSummary `type:"list" required:"true"` // contains filtered or unexported fields }
The ListOperations response includes the following elements.
func (ListOperationsOutput) GoString ¶
func (s ListOperationsOutput) GoString() string
GoString returns the string representation
func (ListOperationsOutput) String ¶
func (s ListOperationsOutput) String() string
String returns the string representation
type ListTagsForDomainInput ¶
type ListTagsForDomainInput struct { // The domain for which you want to get a list of tags. DomainName *string `type:"string" required:"true"` // contains filtered or unexported fields }
The ListTagsForDomainRequest includes the following elements.
func (ListTagsForDomainInput) GoString ¶
func (s ListTagsForDomainInput) GoString() string
GoString returns the string representation
func (ListTagsForDomainInput) String ¶
func (s ListTagsForDomainInput) String() string
String returns the string representation
func (*ListTagsForDomainInput) Validate ¶
func (s *ListTagsForDomainInput) Validate() error
Validate inspects the fields of the type to determine if they are valid.
type ListTagsForDomainOutput ¶
type ListTagsForDomainOutput struct { // A list of the tags that are associated with the specified domain. // // Type: A complex type containing a list of tags // // Each tag includes the following elements. // // Key // // The key (name) of a tag. // // Type: String // // Value // // The value of a tag. // // Type: String TagList []*Tag `type:"list" required:"true"` // contains filtered or unexported fields }
The ListTagsForDomain response includes the following elements.
func (ListTagsForDomainOutput) GoString ¶
func (s ListTagsForDomainOutput) GoString() string
GoString returns the string representation
func (ListTagsForDomainOutput) String ¶
func (s ListTagsForDomainOutput) String() string
String returns the string representation
type Nameserver ¶
type Nameserver struct { // Glue IP address of a name server entry. Glue IP addresses are required only // when the name of the name server is a subdomain of the domain. For example, // if your domain is example.com and the name server for the domain is ns.example.com, // you need to specify the IP address for ns.example.com. // // Type: List of IP addresses. // // Constraints: The list can contain only one IPv4 and one IPv6 address. // // Parent: Nameservers GlueIps []*string `type:"list"` // The fully qualified host name of the name server. // // Type: String // // Constraint: Maximum 255 characterss // // Parent: Nameservers Name *string `type:"string" required:"true"` // contains filtered or unexported fields }
Nameserver includes the following elements.
func (Nameserver) GoString ¶
func (s Nameserver) GoString() string
GoString returns the string representation
func (Nameserver) String ¶
func (s Nameserver) String() string
String returns the string representation
func (*Nameserver) Validate ¶
func (s *Nameserver) Validate() error
Validate inspects the fields of the type to determine if they are valid.
type OperationSummary ¶
type OperationSummary struct { // Identifier returned to track the requested action. // // Type: String OperationId *string `type:"string" required:"true"` // The current status of the requested operation in the system. // // Type: String Status *string `type:"string" required:"true" enum:"OperationStatus"` // The date when the request was submitted. SubmittedDate *time.Time `type:"timestamp" timestampFormat:"unix" required:"true"` // Type of the action requested. // // Type: String // // Valid values: REGISTER_DOMAIN | DELETE_DOMAIN | TRANSFER_IN_DOMAIN | UPDATE_DOMAIN_CONTACT // | UPDATE_NAMESERVER | CHANGE_PRIVACY_PROTECTION | DOMAIN_LOCK Type *string `type:"string" required:"true" enum:"OperationType"` // contains filtered or unexported fields }
OperationSummary includes the following elements.
func (OperationSummary) GoString ¶
func (s OperationSummary) GoString() string
GoString returns the string representation
func (OperationSummary) String ¶
func (s OperationSummary) String() string
String returns the string representation
type RegisterDomainInput ¶
type RegisterDomainInput struct { // Provides detailed contact information. // // Type: Complex // // Children: FirstName, MiddleName, LastName, ContactType, OrganizationName, // AddressLine1, AddressLine2, City, State, CountryCode, ZipCode, PhoneNumber, // Email, Fax, ExtraParams // // Required: Yes AdminContact *ContactDetail `type:"structure" required:"true"` // Indicates whether the domain will be automatically renewed (true) or not // (false). Autorenewal only takes effect after the account is charged. // // Type: Boolean // // Valid values: true | false // // Default: true // // Required: No AutoRenew *bool `type:"boolean"` // The name of a domain. // // Type: String // // Default: None // // Constraints: The domain name can contain only the letters a through z, the // numbers 0 through 9, and hyphen (-). Internationalized Domain Names are not // supported. // // Required: Yes DomainName *string `type:"string" required:"true"` // The number of years the domain will be registered. Domains are registered // for a minimum of one year. The maximum period depends on the top-level domain. // // Type: Integer // // Default: 1 // // Valid values: Integer from 1 to 10 // // Required: Yes DurationInYears *int64 `min:"1" type:"integer" required:"true"` // Reserved for future use. IdnLangCode *string `type:"string"` // Whether you want to conceal contact information from WHOIS queries. If you // specify true, WHOIS ("who is") queries will return contact information for // our registrar partner, Gandi, instead of the contact information that you // enter. // // Type: Boolean // // Default: true // // Valid values: true | false // // Required: No PrivacyProtectAdminContact *bool `type:"boolean"` // Whether you want to conceal contact information from WHOIS queries. If you // specify true, WHOIS ("who is") queries will return contact information for // our registrar partner, Gandi, instead of the contact information that you // enter. // // Type: Boolean // // Default: true // // Valid values: true | false // // Required: No PrivacyProtectRegistrantContact *bool `type:"boolean"` // Whether you want to conceal contact information from WHOIS queries. If you // specify true, WHOIS ("who is") queries will return contact information for // our registrar partner, Gandi, instead of the contact information that you // enter. // // Type: Boolean // // Default: true // // Valid values: true | false // // Required: No PrivacyProtectTechContact *bool `type:"boolean"` // Provides detailed contact information. // // Type: Complex // // Children: FirstName, MiddleName, LastName, ContactType, OrganizationName, // AddressLine1, AddressLine2, City, State, CountryCode, ZipCode, PhoneNumber, // Email, Fax, ExtraParams // // Required: Yes RegistrantContact *ContactDetail `type:"structure" required:"true"` // Provides detailed contact information. // // Type: Complex // // Children: FirstName, MiddleName, LastName, ContactType, OrganizationName, // AddressLine1, AddressLine2, City, State, CountryCode, ZipCode, PhoneNumber, // Email, Fax, ExtraParams // // Required: Yes TechContact *ContactDetail `type:"structure" required:"true"` // contains filtered or unexported fields }
The RegisterDomain request includes the following elements.
func (RegisterDomainInput) GoString ¶
func (s RegisterDomainInput) GoString() string
GoString returns the string representation
func (RegisterDomainInput) String ¶
func (s RegisterDomainInput) String() string
String returns the string representation
func (*RegisterDomainInput) Validate ¶
func (s *RegisterDomainInput) Validate() error
Validate inspects the fields of the type to determine if they are valid.
type RegisterDomainOutput ¶
type RegisterDomainOutput struct { // Identifier for tracking the progress of the request. To use this ID to query // the operation status, use GetOperationDetail. // // Type: String // // Default: None // // Constraints: Maximum 255 characters. OperationId *string `type:"string" required:"true"` // contains filtered or unexported fields }
The RegisterDomain response includes the following element.
func (RegisterDomainOutput) GoString ¶
func (s RegisterDomainOutput) GoString() string
GoString returns the string representation
func (RegisterDomainOutput) String ¶
func (s RegisterDomainOutput) String() string
String returns the string representation
type RenewDomainInput ¶
type RenewDomainInput struct { // The year when the registration for the domain is set to expire. This value // must match the current expiration date for the domain. // // Type: Integer // // Default: None // // Valid values: Integer // // Required: Yes CurrentExpiryYear *int64 `type:"integer" required:"true"` DomainName *string `type:"string" required:"true"` // The number of years that you want to renew the domain for. The maximum number // of years depends on the top-level domain. For the range of valid values for // your domain, see Domains that You Can Register with Amazon Route 53 (http://docs.aws.amazon.com/console/route53/domain-tld-list) // in the Amazon Route 53 documentation. // // Type: Integer // // Default: 1 // // Valid values: Integer from 1 to 10 // // Required: No DurationInYears *int64 `min:"1" type:"integer"` // contains filtered or unexported fields }
A RenewDomain request includes the number of years that you want to renew for and the current expiration year.
func (RenewDomainInput) GoString ¶
func (s RenewDomainInput) GoString() string
GoString returns the string representation
func (RenewDomainInput) String ¶
func (s RenewDomainInput) String() string
String returns the string representation
func (*RenewDomainInput) Validate ¶
func (s *RenewDomainInput) Validate() error
Validate inspects the fields of the type to determine if they are valid.
type RenewDomainOutput ¶
type RenewDomainOutput struct { OperationId *string `type:"string" required:"true"` // contains filtered or unexported fields }
func (RenewDomainOutput) GoString ¶
func (s RenewDomainOutput) GoString() string
GoString returns the string representation
func (RenewDomainOutput) String ¶
func (s RenewDomainOutput) String() string
String returns the string representation
type ResendContactReachabilityEmailInput ¶
type ResendContactReachabilityEmailInput struct { // The name of the domain for which you want Amazon Route 53 to resend a confirmation // email to the registrant contact. // // Type: String // // Default: None // // Required: Yes DomainName *string `locationName:"domainName" type:"string"` // contains filtered or unexported fields }
func (ResendContactReachabilityEmailInput) GoString ¶
func (s ResendContactReachabilityEmailInput) GoString() string
GoString returns the string representation
func (ResendContactReachabilityEmailInput) String ¶
func (s ResendContactReachabilityEmailInput) String() string
String returns the string representation
type ResendContactReachabilityEmailOutput ¶
type ResendContactReachabilityEmailOutput struct { // The domain name for which you requested a confirmation email. DomainName *string `locationName:"domainName" type:"string"` // The email address for the registrant contact at the time that we sent the // verification email. EmailAddress *string `locationName:"emailAddress" type:"string"` // True if the email address for the registrant contact has already been verified, // and false otherwise. If the email address has already been verified, we don't // send another confirmation email. IsAlreadyVerified *bool `locationName:"isAlreadyVerified" type:"boolean"` // contains filtered or unexported fields }
func (ResendContactReachabilityEmailOutput) GoString ¶
func (s ResendContactReachabilityEmailOutput) GoString() string
GoString returns the string representation
func (ResendContactReachabilityEmailOutput) String ¶
func (s ResendContactReachabilityEmailOutput) String() string
String returns the string representation
type RetrieveDomainAuthCodeInput ¶
type RetrieveDomainAuthCodeInput struct { // The name of a domain. // // Type: String // // Default: None // // Constraints: The domain name can contain only the letters a through z, the // numbers 0 through 9, and hyphen (-). Internationalized Domain Names are not // supported. // // Required: Yes DomainName *string `type:"string" required:"true"` // contains filtered or unexported fields }
The RetrieveDomainAuthCode request includes the following element.
func (RetrieveDomainAuthCodeInput) GoString ¶
func (s RetrieveDomainAuthCodeInput) GoString() string
GoString returns the string representation
func (RetrieveDomainAuthCodeInput) String ¶
func (s RetrieveDomainAuthCodeInput) String() string
String returns the string representation
func (*RetrieveDomainAuthCodeInput) Validate ¶
func (s *RetrieveDomainAuthCodeInput) Validate() error
Validate inspects the fields of the type to determine if they are valid.
type RetrieveDomainAuthCodeOutput ¶
type RetrieveDomainAuthCodeOutput struct { // The authorization code for the domain. // // Type: String AuthCode *string `type:"string" required:"true"` // contains filtered or unexported fields }
The RetrieveDomainAuthCode response includes the following element.
func (RetrieveDomainAuthCodeOutput) GoString ¶
func (s RetrieveDomainAuthCodeOutput) GoString() string
GoString returns the string representation
func (RetrieveDomainAuthCodeOutput) String ¶
func (s RetrieveDomainAuthCodeOutput) String() string
String returns the string representation
type Route53Domains ¶
Route53Domains is a client for Amazon Route 53 Domains. The service client's operations are safe to be used concurrently. It is not safe to mutate any of the client's properties though.
func New ¶
func New(p client.ConfigProvider, cfgs ...*aws.Config) *Route53Domains
New creates a new instance of the Route53Domains client with a session. If additional configuration is needed for the client instance use the optional aws.Config parameter to add your extra config.
Example:
// Create a Route53Domains client from just a session. svc := route53domains.New(mySession) // Create a Route53Domains client with additional configuration svc := route53domains.New(mySession, aws.NewConfig().WithRegion("us-west-2"))
func (*Route53Domains) CheckDomainAvailability ¶
func (c *Route53Domains) CheckDomainAvailability(input *CheckDomainAvailabilityInput) (*CheckDomainAvailabilityOutput, error)
This operation checks the availability of one domain name. Note that if the availability status of a domain is pending, you must submit another request to determine the availability of the domain name.
Example ¶
package main import ( "fmt" "github.com/aws/aws-sdk-go/aws" "github.com/aws/aws-sdk-go/aws/session" "github.com/aws/aws-sdk-go/service/route53domains" ) func main() { sess, err := session.NewSession() if err != nil { fmt.Println("failed to create session,", err) return } svc := route53domains.New(sess) params := &route53domains.CheckDomainAvailabilityInput{ DomainName: aws.String("DomainName"), // Required IdnLangCode: aws.String("LangCode"), } resp, err := svc.CheckDomainAvailability(params) if err != nil { // Print the error, cast err to awserr.Error to get the Code and // Message from an error. fmt.Println(err.Error()) return } // Pretty-print the response data. fmt.Println(resp) }
Output:
func (*Route53Domains) CheckDomainAvailabilityRequest ¶
func (c *Route53Domains) CheckDomainAvailabilityRequest(input *CheckDomainAvailabilityInput) (req *request.Request, output *CheckDomainAvailabilityOutput)
CheckDomainAvailabilityRequest generates a "aws/request.Request" representing the client's request for the CheckDomainAvailability operation. The "output" return value can be used to capture response data after the request's "Send" method is called.
Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the CheckDomainAvailability method directly instead.
Note: You must call the "Send" method on the returned request object in order to execute the request.
// Example sending a request using the CheckDomainAvailabilityRequest method. req, resp := client.CheckDomainAvailabilityRequest(params) err := req.Send() if err == nil { // resp is now filled fmt.Println(resp) }
func (*Route53Domains) DeleteTagsForDomain ¶
func (c *Route53Domains) DeleteTagsForDomain(input *DeleteTagsForDomainInput) (*DeleteTagsForDomainOutput, error)
This operation deletes the specified tags for a domain.
All tag operations are eventually consistent; subsequent operations may not immediately represent all issued operations.
Example ¶
package main import ( "fmt" "github.com/aws/aws-sdk-go/aws" "github.com/aws/aws-sdk-go/aws/session" "github.com/aws/aws-sdk-go/service/route53domains" ) func main() { sess, err := session.NewSession() if err != nil { fmt.Println("failed to create session,", err) return } svc := route53domains.New(sess) params := &route53domains.DeleteTagsForDomainInput{ DomainName: aws.String("DomainName"), // Required TagsToDelete: []*string{ // Required aws.String("TagKey"), // Required // More values... }, } resp, err := svc.DeleteTagsForDomain(params) if err != nil { // Print the error, cast err to awserr.Error to get the Code and // Message from an error. fmt.Println(err.Error()) return } // Pretty-print the response data. fmt.Println(resp) }
Output:
func (*Route53Domains) DeleteTagsForDomainRequest ¶
func (c *Route53Domains) DeleteTagsForDomainRequest(input *DeleteTagsForDomainInput) (req *request.Request, output *DeleteTagsForDomainOutput)
DeleteTagsForDomainRequest generates a "aws/request.Request" representing the client's request for the DeleteTagsForDomain operation. The "output" return value can be used to capture response data after the request's "Send" method is called.
Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DeleteTagsForDomain method directly instead.
Note: You must call the "Send" method on the returned request object in order to execute the request.
// Example sending a request using the DeleteTagsForDomainRequest method. req, resp := client.DeleteTagsForDomainRequest(params) err := req.Send() if err == nil { // resp is now filled fmt.Println(resp) }
func (*Route53Domains) DisableDomainAutoRenew ¶
func (c *Route53Domains) DisableDomainAutoRenew(input *DisableDomainAutoRenewInput) (*DisableDomainAutoRenewOutput, error)
This operation disables automatic renewal of domain registration for the specified domain.
Example ¶
package main import ( "fmt" "github.com/aws/aws-sdk-go/aws" "github.com/aws/aws-sdk-go/aws/session" "github.com/aws/aws-sdk-go/service/route53domains" ) func main() { sess, err := session.NewSession() if err != nil { fmt.Println("failed to create session,", err) return } svc := route53domains.New(sess) params := &route53domains.DisableDomainAutoRenewInput{ DomainName: aws.String("DomainName"), // Required } resp, err := svc.DisableDomainAutoRenew(params) if err != nil { // Print the error, cast err to awserr.Error to get the Code and // Message from an error. fmt.Println(err.Error()) return } // Pretty-print the response data. fmt.Println(resp) }
Output:
func (*Route53Domains) DisableDomainAutoRenewRequest ¶
func (c *Route53Domains) DisableDomainAutoRenewRequest(input *DisableDomainAutoRenewInput) (req *request.Request, output *DisableDomainAutoRenewOutput)
DisableDomainAutoRenewRequest generates a "aws/request.Request" representing the client's request for the DisableDomainAutoRenew operation. The "output" return value can be used to capture response data after the request's "Send" method is called.
Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DisableDomainAutoRenew method directly instead.
Note: You must call the "Send" method on the returned request object in order to execute the request.
// Example sending a request using the DisableDomainAutoRenewRequest method. req, resp := client.DisableDomainAutoRenewRequest(params) err := req.Send() if err == nil { // resp is now filled fmt.Println(resp) }
func (*Route53Domains) DisableDomainTransferLock ¶
func (c *Route53Domains) DisableDomainTransferLock(input *DisableDomainTransferLockInput) (*DisableDomainTransferLockOutput, error)
This operation removes the transfer lock on the domain (specifically the clientTransferProhibited status) to allow domain transfers. We recommend you refrain from performing this action unless you intend to transfer the domain to a different registrar. Successful submission returns an operation ID that you can use to track the progress and completion of the action. If the request is not completed successfully, the domain registrant will be notified by email.
Example ¶
package main import ( "fmt" "github.com/aws/aws-sdk-go/aws" "github.com/aws/aws-sdk-go/aws/session" "github.com/aws/aws-sdk-go/service/route53domains" ) func main() { sess, err := session.NewSession() if err != nil { fmt.Println("failed to create session,", err) return } svc := route53domains.New(sess) params := &route53domains.DisableDomainTransferLockInput{ DomainName: aws.String("DomainName"), // Required } resp, err := svc.DisableDomainTransferLock(params) if err != nil { // Print the error, cast err to awserr.Error to get the Code and // Message from an error. fmt.Println(err.Error()) return } // Pretty-print the response data. fmt.Println(resp) }
Output:
func (*Route53Domains) DisableDomainTransferLockRequest ¶
func (c *Route53Domains) DisableDomainTransferLockRequest(input *DisableDomainTransferLockInput) (req *request.Request, output *DisableDomainTransferLockOutput)
DisableDomainTransferLockRequest generates a "aws/request.Request" representing the client's request for the DisableDomainTransferLock operation. The "output" return value can be used to capture response data after the request's "Send" method is called.
Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DisableDomainTransferLock method directly instead.
Note: You must call the "Send" method on the returned request object in order to execute the request.
// Example sending a request using the DisableDomainTransferLockRequest method. req, resp := client.DisableDomainTransferLockRequest(params) err := req.Send() if err == nil { // resp is now filled fmt.Println(resp) }
func (*Route53Domains) EnableDomainAutoRenew ¶
func (c *Route53Domains) EnableDomainAutoRenew(input *EnableDomainAutoRenewInput) (*EnableDomainAutoRenewOutput, error)
This operation configures Amazon Route 53 to automatically renew the specified domain before the domain registration expires. The cost of renewing your domain registration is billed to your AWS account.
The period during which you can renew a domain name varies by TLD. For a list of TLDs and their renewal policies, see "Renewal, restoration, and deletion times" (http://wiki.gandi.net/en/domains/renew#renewal_restoration_and_deletion_times) on the website for our registrar partner, Gandi. Route 53 requires that you renew before the end of the renewal period that is listed on the Gandi website so we can complete processing before the deadline.
Example ¶
package main import ( "fmt" "github.com/aws/aws-sdk-go/aws" "github.com/aws/aws-sdk-go/aws/session" "github.com/aws/aws-sdk-go/service/route53domains" ) func main() { sess, err := session.NewSession() if err != nil { fmt.Println("failed to create session,", err) return } svc := route53domains.New(sess) params := &route53domains.EnableDomainAutoRenewInput{ DomainName: aws.String("DomainName"), // Required } resp, err := svc.EnableDomainAutoRenew(params) if err != nil { // Print the error, cast err to awserr.Error to get the Code and // Message from an error. fmt.Println(err.Error()) return } // Pretty-print the response data. fmt.Println(resp) }
Output:
func (*Route53Domains) EnableDomainAutoRenewRequest ¶
func (c *Route53Domains) EnableDomainAutoRenewRequest(input *EnableDomainAutoRenewInput) (req *request.Request, output *EnableDomainAutoRenewOutput)
EnableDomainAutoRenewRequest generates a "aws/request.Request" representing the client's request for the EnableDomainAutoRenew operation. The "output" return value can be used to capture response data after the request's "Send" method is called.
Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the EnableDomainAutoRenew method directly instead.
Note: You must call the "Send" method on the returned request object in order to execute the request.
// Example sending a request using the EnableDomainAutoRenewRequest method. req, resp := client.EnableDomainAutoRenewRequest(params) err := req.Send() if err == nil { // resp is now filled fmt.Println(resp) }
func (*Route53Domains) EnableDomainTransferLock ¶
func (c *Route53Domains) EnableDomainTransferLock(input *EnableDomainTransferLockInput) (*EnableDomainTransferLockOutput, error)
This operation sets the transfer lock on the domain (specifically the clientTransferProhibited status) to prevent domain transfers. Successful submission returns an operation ID that you can use to track the progress and completion of the action. If the request is not completed successfully, the domain registrant will be notified by email.
Example ¶
package main import ( "fmt" "github.com/aws/aws-sdk-go/aws" "github.com/aws/aws-sdk-go/aws/session" "github.com/aws/aws-sdk-go/service/route53domains" ) func main() { sess, err := session.NewSession() if err != nil { fmt.Println("failed to create session,", err) return } svc := route53domains.New(sess) params := &route53domains.EnableDomainTransferLockInput{ DomainName: aws.String("DomainName"), // Required } resp, err := svc.EnableDomainTransferLock(params) if err != nil { // Print the error, cast err to awserr.Error to get the Code and // Message from an error. fmt.Println(err.Error()) return } // Pretty-print the response data. fmt.Println(resp) }
Output:
func (*Route53Domains) EnableDomainTransferLockRequest ¶
func (c *Route53Domains) EnableDomainTransferLockRequest(input *EnableDomainTransferLockInput) (req *request.Request, output *EnableDomainTransferLockOutput)
EnableDomainTransferLockRequest generates a "aws/request.Request" representing the client's request for the EnableDomainTransferLock operation. The "output" return value can be used to capture response data after the request's "Send" method is called.
Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the EnableDomainTransferLock method directly instead.
Note: You must call the "Send" method on the returned request object in order to execute the request.
// Example sending a request using the EnableDomainTransferLockRequest method. req, resp := client.EnableDomainTransferLockRequest(params) err := req.Send() if err == nil { // resp is now filled fmt.Println(resp) }
func (*Route53Domains) GetContactReachabilityStatus ¶
func (c *Route53Domains) GetContactReachabilityStatus(input *GetContactReachabilityStatusInput) (*GetContactReachabilityStatusOutput, error)
For operations that require confirmation that the email address for the registrant contact is valid, such as registering a new domain, this operation returns information about whether the registrant contact has responded.
If you want us to resend the email, use the ResendContactReachabilityEmail operation.
Example ¶
package main import ( "fmt" "github.com/aws/aws-sdk-go/aws" "github.com/aws/aws-sdk-go/aws/session" "github.com/aws/aws-sdk-go/service/route53domains" ) func main() { sess, err := session.NewSession() if err != nil { fmt.Println("failed to create session,", err) return } svc := route53domains.New(sess) params := &route53domains.GetContactReachabilityStatusInput{ DomainName: aws.String("DomainName"), } resp, err := svc.GetContactReachabilityStatus(params) if err != nil { // Print the error, cast err to awserr.Error to get the Code and // Message from an error. fmt.Println(err.Error()) return } // Pretty-print the response data. fmt.Println(resp) }
Output:
func (*Route53Domains) GetContactReachabilityStatusRequest ¶
func (c *Route53Domains) GetContactReachabilityStatusRequest(input *GetContactReachabilityStatusInput) (req *request.Request, output *GetContactReachabilityStatusOutput)
GetContactReachabilityStatusRequest generates a "aws/request.Request" representing the client's request for the GetContactReachabilityStatus operation. The "output" return value can be used to capture response data after the request's "Send" method is called.
Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the GetContactReachabilityStatus method directly instead.
Note: You must call the "Send" method on the returned request object in order to execute the request.
// Example sending a request using the GetContactReachabilityStatusRequest method. req, resp := client.GetContactReachabilityStatusRequest(params) err := req.Send() if err == nil { // resp is now filled fmt.Println(resp) }
func (*Route53Domains) GetDomainDetail ¶
func (c *Route53Domains) GetDomainDetail(input *GetDomainDetailInput) (*GetDomainDetailOutput, error)
This operation returns detailed information about the domain. The domain's contact information is also returned as part of the output.
Example ¶
package main import ( "fmt" "github.com/aws/aws-sdk-go/aws" "github.com/aws/aws-sdk-go/aws/session" "github.com/aws/aws-sdk-go/service/route53domains" ) func main() { sess, err := session.NewSession() if err != nil { fmt.Println("failed to create session,", err) return } svc := route53domains.New(sess) params := &route53domains.GetDomainDetailInput{ DomainName: aws.String("DomainName"), // Required } resp, err := svc.GetDomainDetail(params) if err != nil { // Print the error, cast err to awserr.Error to get the Code and // Message from an error. fmt.Println(err.Error()) return } // Pretty-print the response data. fmt.Println(resp) }
Output:
func (*Route53Domains) GetDomainDetailRequest ¶
func (c *Route53Domains) GetDomainDetailRequest(input *GetDomainDetailInput) (req *request.Request, output *GetDomainDetailOutput)
GetDomainDetailRequest generates a "aws/request.Request" representing the client's request for the GetDomainDetail operation. The "output" return value can be used to capture response data after the request's "Send" method is called.
Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the GetDomainDetail method directly instead.
Note: You must call the "Send" method on the returned request object in order to execute the request.
// Example sending a request using the GetDomainDetailRequest method. req, resp := client.GetDomainDetailRequest(params) err := req.Send() if err == nil { // resp is now filled fmt.Println(resp) }
func (*Route53Domains) GetDomainSuggestions ¶
func (c *Route53Domains) GetDomainSuggestions(input *GetDomainSuggestionsInput) (*GetDomainSuggestionsOutput, error)
The GetDomainSuggestions operation returns a list of suggested domain names given a string, which can either be a domain name or simply a word or phrase (without spaces).
Parameters: DomainName (string): The basis for your domain suggestion search,
a string with (or without) top-level domain specified. SuggestionCount (int): The number of domain suggestions to be returned, maximum 50, minimum 1. OnlyAvailable (bool): If true, availability check will be performed on suggestion results, and only available domains will be returned. If false, suggestions will be returned without checking whether the domain is actually available, and caller will have to call checkDomainAvailability for each suggestion to determine availability for registration.
Example ¶
package main import ( "fmt" "github.com/aws/aws-sdk-go/aws" "github.com/aws/aws-sdk-go/aws/session" "github.com/aws/aws-sdk-go/service/route53domains" ) func main() { sess, err := session.NewSession() if err != nil { fmt.Println("failed to create session,", err) return } svc := route53domains.New(sess) params := &route53domains.GetDomainSuggestionsInput{ DomainName: aws.String("DomainName"), // Required OnlyAvailable: aws.Bool(true), // Required SuggestionCount: aws.Int64(1), // Required } resp, err := svc.GetDomainSuggestions(params) if err != nil { // Print the error, cast err to awserr.Error to get the Code and // Message from an error. fmt.Println(err.Error()) return } // Pretty-print the response data. fmt.Println(resp) }
Output:
func (*Route53Domains) GetDomainSuggestionsRequest ¶
func (c *Route53Domains) GetDomainSuggestionsRequest(input *GetDomainSuggestionsInput) (req *request.Request, output *GetDomainSuggestionsOutput)
GetDomainSuggestionsRequest generates a "aws/request.Request" representing the client's request for the GetDomainSuggestions operation. The "output" return value can be used to capture response data after the request's "Send" method is called.
Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the GetDomainSuggestions method directly instead.
Note: You must call the "Send" method on the returned request object in order to execute the request.
// Example sending a request using the GetDomainSuggestionsRequest method. req, resp := client.GetDomainSuggestionsRequest(params) err := req.Send() if err == nil { // resp is now filled fmt.Println(resp) }
func (*Route53Domains) GetOperationDetail ¶
func (c *Route53Domains) GetOperationDetail(input *GetOperationDetailInput) (*GetOperationDetailOutput, error)
This operation returns the current status of an operation that is not completed.
Example ¶
package main import ( "fmt" "github.com/aws/aws-sdk-go/aws" "github.com/aws/aws-sdk-go/aws/session" "github.com/aws/aws-sdk-go/service/route53domains" ) func main() { sess, err := session.NewSession() if err != nil { fmt.Println("failed to create session,", err) return } svc := route53domains.New(sess) params := &route53domains.GetOperationDetailInput{ OperationId: aws.String("OperationId"), // Required } resp, err := svc.GetOperationDetail(params) if err != nil { // Print the error, cast err to awserr.Error to get the Code and // Message from an error. fmt.Println(err.Error()) return } // Pretty-print the response data. fmt.Println(resp) }
Output:
func (*Route53Domains) GetOperationDetailRequest ¶
func (c *Route53Domains) GetOperationDetailRequest(input *GetOperationDetailInput) (req *request.Request, output *GetOperationDetailOutput)
GetOperationDetailRequest generates a "aws/request.Request" representing the client's request for the GetOperationDetail operation. The "output" return value can be used to capture response data after the request's "Send" method is called.
Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the GetOperationDetail method directly instead.
Note: You must call the "Send" method on the returned request object in order to execute the request.
// Example sending a request using the GetOperationDetailRequest method. req, resp := client.GetOperationDetailRequest(params) err := req.Send() if err == nil { // resp is now filled fmt.Println(resp) }
func (*Route53Domains) ListDomains ¶
func (c *Route53Domains) ListDomains(input *ListDomainsInput) (*ListDomainsOutput, error)
This operation returns all the domain names registered with Amazon Route 53 for the current AWS account.
Example ¶
package main import ( "fmt" "github.com/aws/aws-sdk-go/aws" "github.com/aws/aws-sdk-go/aws/session" "github.com/aws/aws-sdk-go/service/route53domains" ) func main() { sess, err := session.NewSession() if err != nil { fmt.Println("failed to create session,", err) return } svc := route53domains.New(sess) params := &route53domains.ListDomainsInput{ Marker: aws.String("PageMarker"), MaxItems: aws.Int64(1), } resp, err := svc.ListDomains(params) if err != nil { // Print the error, cast err to awserr.Error to get the Code and // Message from an error. fmt.Println(err.Error()) return } // Pretty-print the response data. fmt.Println(resp) }
Output:
func (*Route53Domains) ListDomainsPages ¶
func (c *Route53Domains) ListDomainsPages(input *ListDomainsInput, fn func(p *ListDomainsOutput, lastPage bool) (shouldContinue bool)) error
ListDomainsPages iterates over the pages of a ListDomains operation, calling the "fn" function with the response data for each page. To stop iterating, return false from the fn function.
See ListDomains method for more information on how to use this operation.
Note: This operation can generate multiple requests to a service.
// Example iterating over at most 3 pages of a ListDomains operation. pageNum := 0 err := client.ListDomainsPages(params, func(page *ListDomainsOutput, lastPage bool) bool { pageNum++ fmt.Println(page) return pageNum <= 3 })
func (*Route53Domains) ListDomainsRequest ¶
func (c *Route53Domains) ListDomainsRequest(input *ListDomainsInput) (req *request.Request, output *ListDomainsOutput)
ListDomainsRequest generates a "aws/request.Request" representing the client's request for the ListDomains operation. The "output" return value can be used to capture response data after the request's "Send" method is called.
Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the ListDomains method directly instead.
Note: You must call the "Send" method on the returned request object in order to execute the request.
// Example sending a request using the ListDomainsRequest method. req, resp := client.ListDomainsRequest(params) err := req.Send() if err == nil { // resp is now filled fmt.Println(resp) }
func (*Route53Domains) ListOperations ¶
func (c *Route53Domains) ListOperations(input *ListOperationsInput) (*ListOperationsOutput, error)
This operation returns the operation IDs of operations that are not yet complete.
Example ¶
package main import ( "fmt" "github.com/aws/aws-sdk-go/aws" "github.com/aws/aws-sdk-go/aws/session" "github.com/aws/aws-sdk-go/service/route53domains" ) func main() { sess, err := session.NewSession() if err != nil { fmt.Println("failed to create session,", err) return } svc := route53domains.New(sess) params := &route53domains.ListOperationsInput{ Marker: aws.String("PageMarker"), MaxItems: aws.Int64(1), } resp, err := svc.ListOperations(params) if err != nil { // Print the error, cast err to awserr.Error to get the Code and // Message from an error. fmt.Println(err.Error()) return } // Pretty-print the response data. fmt.Println(resp) }
Output:
func (*Route53Domains) ListOperationsPages ¶
func (c *Route53Domains) ListOperationsPages(input *ListOperationsInput, fn func(p *ListOperationsOutput, lastPage bool) (shouldContinue bool)) error
ListOperationsPages iterates over the pages of a ListOperations operation, calling the "fn" function with the response data for each page. To stop iterating, return false from the fn function.
See ListOperations method for more information on how to use this operation.
Note: This operation can generate multiple requests to a service.
// Example iterating over at most 3 pages of a ListOperations operation. pageNum := 0 err := client.ListOperationsPages(params, func(page *ListOperationsOutput, lastPage bool) bool { pageNum++ fmt.Println(page) return pageNum <= 3 })
func (*Route53Domains) ListOperationsRequest ¶
func (c *Route53Domains) ListOperationsRequest(input *ListOperationsInput) (req *request.Request, output *ListOperationsOutput)
ListOperationsRequest generates a "aws/request.Request" representing the client's request for the ListOperations operation. The "output" return value can be used to capture response data after the request's "Send" method is called.
Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the ListOperations method directly instead.
Note: You must call the "Send" method on the returned request object in order to execute the request.
// Example sending a request using the ListOperationsRequest method. req, resp := client.ListOperationsRequest(params) err := req.Send() if err == nil { // resp is now filled fmt.Println(resp) }
func (*Route53Domains) ListTagsForDomain ¶
func (c *Route53Domains) ListTagsForDomain(input *ListTagsForDomainInput) (*ListTagsForDomainOutput, error)
This operation returns all of the tags that are associated with the specified domain.
All tag operations are eventually consistent; subsequent operations may not immediately represent all issued operations.
Example ¶
package main import ( "fmt" "github.com/aws/aws-sdk-go/aws" "github.com/aws/aws-sdk-go/aws/session" "github.com/aws/aws-sdk-go/service/route53domains" ) func main() { sess, err := session.NewSession() if err != nil { fmt.Println("failed to create session,", err) return } svc := route53domains.New(sess) params := &route53domains.ListTagsForDomainInput{ DomainName: aws.String("DomainName"), // Required } resp, err := svc.ListTagsForDomain(params) if err != nil { // Print the error, cast err to awserr.Error to get the Code and // Message from an error. fmt.Println(err.Error()) return } // Pretty-print the response data. fmt.Println(resp) }
Output:
func (*Route53Domains) ListTagsForDomainRequest ¶
func (c *Route53Domains) ListTagsForDomainRequest(input *ListTagsForDomainInput) (req *request.Request, output *ListTagsForDomainOutput)
ListTagsForDomainRequest generates a "aws/request.Request" representing the client's request for the ListTagsForDomain operation. The "output" return value can be used to capture response data after the request's "Send" method is called.
Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the ListTagsForDomain method directly instead.
Note: You must call the "Send" method on the returned request object in order to execute the request.
// Example sending a request using the ListTagsForDomainRequest method. req, resp := client.ListTagsForDomainRequest(params) err := req.Send() if err == nil { // resp is now filled fmt.Println(resp) }
func (*Route53Domains) RegisterDomain ¶
func (c *Route53Domains) RegisterDomain(input *RegisterDomainInput) (*RegisterDomainOutput, error)
This operation registers a domain. Domains are registered by the AWS registrar partner, Gandi. For some top-level domains (TLDs), this operation requires extra parameters.
When you register a domain, Amazon Route 53 does the following:
Creates a Amazon Route 53 hosted zone that has the same name as the domain.
Amazon Route 53 assigns four name servers to your hosted zone and automatically updates your domain registration with the names of these name servers. Enables autorenew, so your domain registration will renew automatically each year. We'll notify you in advance of the renewal date so you can choose whether to renew the registration. Optionally enables privacy protection, so WHOIS queries return contact information for our registrar partner, Gandi, instead of the information you entered for registrant, admin, and tech contacts. If registration is successful, returns an operation ID that you can use to track the progress and completion of the action. If the request is not completed successfully, the domain registrant is notified by email. Charges your AWS account an amount based on the top-level domain. For more information, see Amazon Route 53 Pricing (http://aws.amazon.com/route53/pricing/).
Example ¶
package main import ( "fmt" "github.com/aws/aws-sdk-go/aws" "github.com/aws/aws-sdk-go/aws/session" "github.com/aws/aws-sdk-go/service/route53domains" ) func main() { sess, err := session.NewSession() if err != nil { fmt.Println("failed to create session,", err) return } svc := route53domains.New(sess) params := &route53domains.RegisterDomainInput{ AdminContact: &route53domains.ContactDetail{ // Required AddressLine1: aws.String("AddressLine"), AddressLine2: aws.String("AddressLine"), City: aws.String("City"), ContactType: aws.String("ContactType"), CountryCode: aws.String("CountryCode"), Email: aws.String("Email"), ExtraParams: []*route53domains.ExtraParam{ { // Required Name: aws.String("ExtraParamName"), // Required Value: aws.String("ExtraParamValue"), // Required }, // More values... }, Fax: aws.String("ContactNumber"), FirstName: aws.String("ContactName"), LastName: aws.String("ContactName"), OrganizationName: aws.String("ContactName"), PhoneNumber: aws.String("ContactNumber"), State: aws.String("State"), ZipCode: aws.String("ZipCode"), }, DomainName: aws.String("DomainName"), // Required DurationInYears: aws.Int64(1), // Required RegistrantContact: &route53domains.ContactDetail{ // Required AddressLine1: aws.String("AddressLine"), AddressLine2: aws.String("AddressLine"), City: aws.String("City"), ContactType: aws.String("ContactType"), CountryCode: aws.String("CountryCode"), Email: aws.String("Email"), ExtraParams: []*route53domains.ExtraParam{ { // Required Name: aws.String("ExtraParamName"), // Required Value: aws.String("ExtraParamValue"), // Required }, // More values... }, Fax: aws.String("ContactNumber"), FirstName: aws.String("ContactName"), LastName: aws.String("ContactName"), OrganizationName: aws.String("ContactName"), PhoneNumber: aws.String("ContactNumber"), State: aws.String("State"), ZipCode: aws.String("ZipCode"), }, TechContact: &route53domains.ContactDetail{ // Required AddressLine1: aws.String("AddressLine"), AddressLine2: aws.String("AddressLine"), City: aws.String("City"), ContactType: aws.String("ContactType"), CountryCode: aws.String("CountryCode"), Email: aws.String("Email"), ExtraParams: []*route53domains.ExtraParam{ { // Required Name: aws.String("ExtraParamName"), // Required Value: aws.String("ExtraParamValue"), // Required }, // More values... }, Fax: aws.String("ContactNumber"), FirstName: aws.String("ContactName"), LastName: aws.String("ContactName"), OrganizationName: aws.String("ContactName"), PhoneNumber: aws.String("ContactNumber"), State: aws.String("State"), ZipCode: aws.String("ZipCode"), }, AutoRenew: aws.Bool(true), IdnLangCode: aws.String("LangCode"), PrivacyProtectAdminContact: aws.Bool(true), PrivacyProtectRegistrantContact: aws.Bool(true), PrivacyProtectTechContact: aws.Bool(true), } resp, err := svc.RegisterDomain(params) if err != nil { // Print the error, cast err to awserr.Error to get the Code and // Message from an error. fmt.Println(err.Error()) return } // Pretty-print the response data. fmt.Println(resp) }
Output:
func (*Route53Domains) RegisterDomainRequest ¶
func (c *Route53Domains) RegisterDomainRequest(input *RegisterDomainInput) (req *request.Request, output *RegisterDomainOutput)
RegisterDomainRequest generates a "aws/request.Request" representing the client's request for the RegisterDomain operation. The "output" return value can be used to capture response data after the request's "Send" method is called.
Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the RegisterDomain method directly instead.
Note: You must call the "Send" method on the returned request object in order to execute the request.
// Example sending a request using the RegisterDomainRequest method. req, resp := client.RegisterDomainRequest(params) err := req.Send() if err == nil { // resp is now filled fmt.Println(resp) }
func (*Route53Domains) RenewDomain ¶
func (c *Route53Domains) RenewDomain(input *RenewDomainInput) (*RenewDomainOutput, error)
This operation renews a domain for the specified number of years. The cost of renewing your domain is billed to your AWS account.
We recommend that you renew your domain several weeks before the expiration date. Some TLD registries delete domains before the expiration date if you haven't renewed far enough in advance. For more information about renewing domain registration, see Renewing Registration for a Domain (http://docs.aws.amazon.com/console/route53/domain-renew) in the Amazon Route 53 documentation.
Example ¶
package main import ( "fmt" "github.com/aws/aws-sdk-go/aws" "github.com/aws/aws-sdk-go/aws/session" "github.com/aws/aws-sdk-go/service/route53domains" ) func main() { sess, err := session.NewSession() if err != nil { fmt.Println("failed to create session,", err) return } svc := route53domains.New(sess) params := &route53domains.RenewDomainInput{ CurrentExpiryYear: aws.Int64(1), // Required DomainName: aws.String("DomainName"), // Required DurationInYears: aws.Int64(1), } resp, err := svc.RenewDomain(params) if err != nil { // Print the error, cast err to awserr.Error to get the Code and // Message from an error. fmt.Println(err.Error()) return } // Pretty-print the response data. fmt.Println(resp) }
Output:
func (*Route53Domains) RenewDomainRequest ¶
func (c *Route53Domains) RenewDomainRequest(input *RenewDomainInput) (req *request.Request, output *RenewDomainOutput)
RenewDomainRequest generates a "aws/request.Request" representing the client's request for the RenewDomain operation. The "output" return value can be used to capture response data after the request's "Send" method is called.
Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the RenewDomain method directly instead.
Note: You must call the "Send" method on the returned request object in order to execute the request.
// Example sending a request using the RenewDomainRequest method. req, resp := client.RenewDomainRequest(params) err := req.Send() if err == nil { // resp is now filled fmt.Println(resp) }
func (*Route53Domains) ResendContactReachabilityEmail ¶
func (c *Route53Domains) ResendContactReachabilityEmail(input *ResendContactReachabilityEmailInput) (*ResendContactReachabilityEmailOutput, error)
For operations that require confirmation that the email address for the registrant contact is valid, such as registering a new domain, this operation resends the confirmation email to the current email address for the registrant contact.
Example ¶
package main import ( "fmt" "github.com/aws/aws-sdk-go/aws" "github.com/aws/aws-sdk-go/aws/session" "github.com/aws/aws-sdk-go/service/route53domains" ) func main() { sess, err := session.NewSession() if err != nil { fmt.Println("failed to create session,", err) return } svc := route53domains.New(sess) params := &route53domains.ResendContactReachabilityEmailInput{ DomainName: aws.String("DomainName"), } resp, err := svc.ResendContactReachabilityEmail(params) if err != nil { // Print the error, cast err to awserr.Error to get the Code and // Message from an error. fmt.Println(err.Error()) return } // Pretty-print the response data. fmt.Println(resp) }
Output:
func (*Route53Domains) ResendContactReachabilityEmailRequest ¶
func (c *Route53Domains) ResendContactReachabilityEmailRequest(input *ResendContactReachabilityEmailInput) (req *request.Request, output *ResendContactReachabilityEmailOutput)
ResendContactReachabilityEmailRequest generates a "aws/request.Request" representing the client's request for the ResendContactReachabilityEmail operation. The "output" return value can be used to capture response data after the request's "Send" method is called.
Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the ResendContactReachabilityEmail method directly instead.
Note: You must call the "Send" method on the returned request object in order to execute the request.
// Example sending a request using the ResendContactReachabilityEmailRequest method. req, resp := client.ResendContactReachabilityEmailRequest(params) err := req.Send() if err == nil { // resp is now filled fmt.Println(resp) }
func (*Route53Domains) RetrieveDomainAuthCode ¶
func (c *Route53Domains) RetrieveDomainAuthCode(input *RetrieveDomainAuthCodeInput) (*RetrieveDomainAuthCodeOutput, error)
This operation returns the AuthCode for the domain. To transfer a domain to another registrar, you provide this value to the new registrar.
Example ¶
package main import ( "fmt" "github.com/aws/aws-sdk-go/aws" "github.com/aws/aws-sdk-go/aws/session" "github.com/aws/aws-sdk-go/service/route53domains" ) func main() { sess, err := session.NewSession() if err != nil { fmt.Println("failed to create session,", err) return } svc := route53domains.New(sess) params := &route53domains.RetrieveDomainAuthCodeInput{ DomainName: aws.String("DomainName"), // Required } resp, err := svc.RetrieveDomainAuthCode(params) if err != nil { // Print the error, cast err to awserr.Error to get the Code and // Message from an error. fmt.Println(err.Error()) return } // Pretty-print the response data. fmt.Println(resp) }
Output:
func (*Route53Domains) RetrieveDomainAuthCodeRequest ¶
func (c *Route53Domains) RetrieveDomainAuthCodeRequest(input *RetrieveDomainAuthCodeInput) (req *request.Request, output *RetrieveDomainAuthCodeOutput)
RetrieveDomainAuthCodeRequest generates a "aws/request.Request" representing the client's request for the RetrieveDomainAuthCode operation. The "output" return value can be used to capture response data after the request's "Send" method is called.
Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the RetrieveDomainAuthCode method directly instead.
Note: You must call the "Send" method on the returned request object in order to execute the request.
// Example sending a request using the RetrieveDomainAuthCodeRequest method. req, resp := client.RetrieveDomainAuthCodeRequest(params) err := req.Send() if err == nil { // resp is now filled fmt.Println(resp) }
func (*Route53Domains) TransferDomain ¶
func (c *Route53Domains) TransferDomain(input *TransferDomainInput) (*TransferDomainOutput, error)
This operation transfers a domain from another registrar to Amazon Route 53. When the transfer is complete, the domain is registered with the AWS registrar partner, Gandi.
For transfer requirements, a detailed procedure, and information about viewing the status of a domain transfer, see Transferring Registration for a Domain to Amazon Route 53 (http://docs.aws.amazon.com/Route53/latest/DeveloperGuide/domain-transfer-to-route-53.html) in the Amazon Route 53 Developer Guide.
If the registrar for your domain is also the DNS service provider for the domain, we highly recommend that you consider transferring your DNS service to Amazon Route 53 or to another DNS service provider before you transfer your registration. Some registrars provide free DNS service when you purchase a domain registration. When you transfer the registration, the previous registrar will not renew your domain registration and could end your DNS service at any time.
Caution! If the registrar for your domain is also the DNS service provider for the domain and you don't transfer DNS service to another provider, your website, email, and the web applications associated with the domain might become unavailable. If the transfer is successful, this method returns an operation ID that you can use to track the progress and completion of the action. If the transfer doesn't complete successfully, the domain registrant will be notified by email.
Example ¶
package main import ( "fmt" "github.com/aws/aws-sdk-go/aws" "github.com/aws/aws-sdk-go/aws/session" "github.com/aws/aws-sdk-go/service/route53domains" ) func main() { sess, err := session.NewSession() if err != nil { fmt.Println("failed to create session,", err) return } svc := route53domains.New(sess) params := &route53domains.TransferDomainInput{ AdminContact: &route53domains.ContactDetail{ // Required AddressLine1: aws.String("AddressLine"), AddressLine2: aws.String("AddressLine"), City: aws.String("City"), ContactType: aws.String("ContactType"), CountryCode: aws.String("CountryCode"), Email: aws.String("Email"), ExtraParams: []*route53domains.ExtraParam{ { // Required Name: aws.String("ExtraParamName"), // Required Value: aws.String("ExtraParamValue"), // Required }, // More values... }, Fax: aws.String("ContactNumber"), FirstName: aws.String("ContactName"), LastName: aws.String("ContactName"), OrganizationName: aws.String("ContactName"), PhoneNumber: aws.String("ContactNumber"), State: aws.String("State"), ZipCode: aws.String("ZipCode"), }, DomainName: aws.String("DomainName"), // Required DurationInYears: aws.Int64(1), // Required RegistrantContact: &route53domains.ContactDetail{ // Required AddressLine1: aws.String("AddressLine"), AddressLine2: aws.String("AddressLine"), City: aws.String("City"), ContactType: aws.String("ContactType"), CountryCode: aws.String("CountryCode"), Email: aws.String("Email"), ExtraParams: []*route53domains.ExtraParam{ { // Required Name: aws.String("ExtraParamName"), // Required Value: aws.String("ExtraParamValue"), // Required }, // More values... }, Fax: aws.String("ContactNumber"), FirstName: aws.String("ContactName"), LastName: aws.String("ContactName"), OrganizationName: aws.String("ContactName"), PhoneNumber: aws.String("ContactNumber"), State: aws.String("State"), ZipCode: aws.String("ZipCode"), }, TechContact: &route53domains.ContactDetail{ // Required AddressLine1: aws.String("AddressLine"), AddressLine2: aws.String("AddressLine"), City: aws.String("City"), ContactType: aws.String("ContactType"), CountryCode: aws.String("CountryCode"), Email: aws.String("Email"), ExtraParams: []*route53domains.ExtraParam{ { // Required Name: aws.String("ExtraParamName"), // Required Value: aws.String("ExtraParamValue"), // Required }, // More values... }, Fax: aws.String("ContactNumber"), FirstName: aws.String("ContactName"), LastName: aws.String("ContactName"), OrganizationName: aws.String("ContactName"), PhoneNumber: aws.String("ContactNumber"), State: aws.String("State"), ZipCode: aws.String("ZipCode"), }, AuthCode: aws.String("DomainAuthCode"), AutoRenew: aws.Bool(true), IdnLangCode: aws.String("LangCode"), Nameservers: []*route53domains.Nameserver{ { // Required Name: aws.String("HostName"), // Required GlueIps: []*string{ aws.String("GlueIp"), // Required // More values... }, }, // More values... }, PrivacyProtectAdminContact: aws.Bool(true), PrivacyProtectRegistrantContact: aws.Bool(true), PrivacyProtectTechContact: aws.Bool(true), } resp, err := svc.TransferDomain(params) if err != nil { // Print the error, cast err to awserr.Error to get the Code and // Message from an error. fmt.Println(err.Error()) return } // Pretty-print the response data. fmt.Println(resp) }
Output:
func (*Route53Domains) TransferDomainRequest ¶
func (c *Route53Domains) TransferDomainRequest(input *TransferDomainInput) (req *request.Request, output *TransferDomainOutput)
TransferDomainRequest generates a "aws/request.Request" representing the client's request for the TransferDomain operation. The "output" return value can be used to capture response data after the request's "Send" method is called.
Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the TransferDomain method directly instead.
Note: You must call the "Send" method on the returned request object in order to execute the request.
// Example sending a request using the TransferDomainRequest method. req, resp := client.TransferDomainRequest(params) err := req.Send() if err == nil { // resp is now filled fmt.Println(resp) }
func (*Route53Domains) UpdateDomainContact ¶
func (c *Route53Domains) UpdateDomainContact(input *UpdateDomainContactInput) (*UpdateDomainContactOutput, error)
This operation updates the contact information for a particular domain. Information for at least one contact (registrant, administrator, or technical) must be supplied for update.
If the update is successful, this method returns an operation ID that you can use to track the progress and completion of the action. If the request is not completed successfully, the domain registrant will be notified by email.
Example ¶
package main import ( "fmt" "github.com/aws/aws-sdk-go/aws" "github.com/aws/aws-sdk-go/aws/session" "github.com/aws/aws-sdk-go/service/route53domains" ) func main() { sess, err := session.NewSession() if err != nil { fmt.Println("failed to create session,", err) return } svc := route53domains.New(sess) params := &route53domains.UpdateDomainContactInput{ DomainName: aws.String("DomainName"), // Required AdminContact: &route53domains.ContactDetail{ AddressLine1: aws.String("AddressLine"), AddressLine2: aws.String("AddressLine"), City: aws.String("City"), ContactType: aws.String("ContactType"), CountryCode: aws.String("CountryCode"), Email: aws.String("Email"), ExtraParams: []*route53domains.ExtraParam{ { // Required Name: aws.String("ExtraParamName"), // Required Value: aws.String("ExtraParamValue"), // Required }, // More values... }, Fax: aws.String("ContactNumber"), FirstName: aws.String("ContactName"), LastName: aws.String("ContactName"), OrganizationName: aws.String("ContactName"), PhoneNumber: aws.String("ContactNumber"), State: aws.String("State"), ZipCode: aws.String("ZipCode"), }, RegistrantContact: &route53domains.ContactDetail{ AddressLine1: aws.String("AddressLine"), AddressLine2: aws.String("AddressLine"), City: aws.String("City"), ContactType: aws.String("ContactType"), CountryCode: aws.String("CountryCode"), Email: aws.String("Email"), ExtraParams: []*route53domains.ExtraParam{ { // Required Name: aws.String("ExtraParamName"), // Required Value: aws.String("ExtraParamValue"), // Required }, // More values... }, Fax: aws.String("ContactNumber"), FirstName: aws.String("ContactName"), LastName: aws.String("ContactName"), OrganizationName: aws.String("ContactName"), PhoneNumber: aws.String("ContactNumber"), State: aws.String("State"), ZipCode: aws.String("ZipCode"), }, TechContact: &route53domains.ContactDetail{ AddressLine1: aws.String("AddressLine"), AddressLine2: aws.String("AddressLine"), City: aws.String("City"), ContactType: aws.String("ContactType"), CountryCode: aws.String("CountryCode"), Email: aws.String("Email"), ExtraParams: []*route53domains.ExtraParam{ { // Required Name: aws.String("ExtraParamName"), // Required Value: aws.String("ExtraParamValue"), // Required }, // More values... }, Fax: aws.String("ContactNumber"), FirstName: aws.String("ContactName"), LastName: aws.String("ContactName"), OrganizationName: aws.String("ContactName"), PhoneNumber: aws.String("ContactNumber"), State: aws.String("State"), ZipCode: aws.String("ZipCode"), }, } resp, err := svc.UpdateDomainContact(params) if err != nil { // Print the error, cast err to awserr.Error to get the Code and // Message from an error. fmt.Println(err.Error()) return } // Pretty-print the response data. fmt.Println(resp) }
Output:
func (*Route53Domains) UpdateDomainContactPrivacy ¶
func (c *Route53Domains) UpdateDomainContactPrivacy(input *UpdateDomainContactPrivacyInput) (*UpdateDomainContactPrivacyOutput, error)
This operation updates the specified domain contact's privacy setting. When the privacy option is enabled, personal information such as postal or email address is hidden from the results of a public WHOIS query. The privacy services are provided by the AWS registrar, Gandi. For more information, see the Gandi privacy features (http://www.gandi.net/domain/whois/?currency=USD&lang=en).
This operation only affects the privacy of the specified contact type (registrant, administrator, or tech). Successful acceptance returns an operation ID that you can use with GetOperationDetail to track the progress and completion of the action. If the request is not completed successfully, the domain registrant will be notified by email.
Example ¶
package main import ( "fmt" "github.com/aws/aws-sdk-go/aws" "github.com/aws/aws-sdk-go/aws/session" "github.com/aws/aws-sdk-go/service/route53domains" ) func main() { sess, err := session.NewSession() if err != nil { fmt.Println("failed to create session,", err) return } svc := route53domains.New(sess) params := &route53domains.UpdateDomainContactPrivacyInput{ DomainName: aws.String("DomainName"), // Required AdminPrivacy: aws.Bool(true), RegistrantPrivacy: aws.Bool(true), TechPrivacy: aws.Bool(true), } resp, err := svc.UpdateDomainContactPrivacy(params) if err != nil { // Print the error, cast err to awserr.Error to get the Code and // Message from an error. fmt.Println(err.Error()) return } // Pretty-print the response data. fmt.Println(resp) }
Output:
func (*Route53Domains) UpdateDomainContactPrivacyRequest ¶
func (c *Route53Domains) UpdateDomainContactPrivacyRequest(input *UpdateDomainContactPrivacyInput) (req *request.Request, output *UpdateDomainContactPrivacyOutput)
UpdateDomainContactPrivacyRequest generates a "aws/request.Request" representing the client's request for the UpdateDomainContactPrivacy operation. The "output" return value can be used to capture response data after the request's "Send" method is called.
Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the UpdateDomainContactPrivacy method directly instead.
Note: You must call the "Send" method on the returned request object in order to execute the request.
// Example sending a request using the UpdateDomainContactPrivacyRequest method. req, resp := client.UpdateDomainContactPrivacyRequest(params) err := req.Send() if err == nil { // resp is now filled fmt.Println(resp) }
func (*Route53Domains) UpdateDomainContactRequest ¶
func (c *Route53Domains) UpdateDomainContactRequest(input *UpdateDomainContactInput) (req *request.Request, output *UpdateDomainContactOutput)
UpdateDomainContactRequest generates a "aws/request.Request" representing the client's request for the UpdateDomainContact operation. The "output" return value can be used to capture response data after the request's "Send" method is called.
Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the UpdateDomainContact method directly instead.
Note: You must call the "Send" method on the returned request object in order to execute the request.
// Example sending a request using the UpdateDomainContactRequest method. req, resp := client.UpdateDomainContactRequest(params) err := req.Send() if err == nil { // resp is now filled fmt.Println(resp) }
func (*Route53Domains) UpdateDomainNameservers ¶
func (c *Route53Domains) UpdateDomainNameservers(input *UpdateDomainNameserversInput) (*UpdateDomainNameserversOutput, error)
This operation replaces the current set of name servers for the domain with the specified set of name servers. If you use Amazon Route 53 as your DNS service, specify the four name servers in the delegation set for the hosted zone for the domain.
If successful, this operation returns an operation ID that you can use to track the progress and completion of the action. If the request is not completed successfully, the domain registrant will be notified by email.
Example ¶
package main import ( "fmt" "github.com/aws/aws-sdk-go/aws" "github.com/aws/aws-sdk-go/aws/session" "github.com/aws/aws-sdk-go/service/route53domains" ) func main() { sess, err := session.NewSession() if err != nil { fmt.Println("failed to create session,", err) return } svc := route53domains.New(sess) params := &route53domains.UpdateDomainNameserversInput{ DomainName: aws.String("DomainName"), // Required Nameservers: []*route53domains.Nameserver{ // Required { // Required Name: aws.String("HostName"), // Required GlueIps: []*string{ aws.String("GlueIp"), // Required // More values... }, }, // More values... }, FIAuthKey: aws.String("FIAuthKey"), } resp, err := svc.UpdateDomainNameservers(params) if err != nil { // Print the error, cast err to awserr.Error to get the Code and // Message from an error. fmt.Println(err.Error()) return } // Pretty-print the response data. fmt.Println(resp) }
Output:
func (*Route53Domains) UpdateDomainNameserversRequest ¶
func (c *Route53Domains) UpdateDomainNameserversRequest(input *UpdateDomainNameserversInput) (req *request.Request, output *UpdateDomainNameserversOutput)
UpdateDomainNameserversRequest generates a "aws/request.Request" representing the client's request for the UpdateDomainNameservers operation. The "output" return value can be used to capture response data after the request's "Send" method is called.
Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the UpdateDomainNameservers method directly instead.
Note: You must call the "Send" method on the returned request object in order to execute the request.
// Example sending a request using the UpdateDomainNameserversRequest method. req, resp := client.UpdateDomainNameserversRequest(params) err := req.Send() if err == nil { // resp is now filled fmt.Println(resp) }
func (*Route53Domains) UpdateTagsForDomain ¶
func (c *Route53Domains) UpdateTagsForDomain(input *UpdateTagsForDomainInput) (*UpdateTagsForDomainOutput, error)
This operation adds or updates tags for a specified domain.
All tag operations are eventually consistent; subsequent operations may not immediately represent all issued operations.
Example ¶
package main import ( "fmt" "github.com/aws/aws-sdk-go/aws" "github.com/aws/aws-sdk-go/aws/session" "github.com/aws/aws-sdk-go/service/route53domains" ) func main() { sess, err := session.NewSession() if err != nil { fmt.Println("failed to create session,", err) return } svc := route53domains.New(sess) params := &route53domains.UpdateTagsForDomainInput{ DomainName: aws.String("DomainName"), // Required TagsToUpdate: []*route53domains.Tag{ { // Required Key: aws.String("TagKey"), Value: aws.String("TagValue"), }, // More values... }, } resp, err := svc.UpdateTagsForDomain(params) if err != nil { // Print the error, cast err to awserr.Error to get the Code and // Message from an error. fmt.Println(err.Error()) return } // Pretty-print the response data. fmt.Println(resp) }
Output:
func (*Route53Domains) UpdateTagsForDomainRequest ¶
func (c *Route53Domains) UpdateTagsForDomainRequest(input *UpdateTagsForDomainInput) (req *request.Request, output *UpdateTagsForDomainOutput)
UpdateTagsForDomainRequest generates a "aws/request.Request" representing the client's request for the UpdateTagsForDomain operation. The "output" return value can be used to capture response data after the request's "Send" method is called.
Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the UpdateTagsForDomain method directly instead.
Note: You must call the "Send" method on the returned request object in order to execute the request.
// Example sending a request using the UpdateTagsForDomainRequest method. req, resp := client.UpdateTagsForDomainRequest(params) err := req.Send() if err == nil { // resp is now filled fmt.Println(resp) }
func (*Route53Domains) ViewBilling ¶
func (c *Route53Domains) ViewBilling(input *ViewBillingInput) (*ViewBillingOutput, error)
This operation returns all the domain-related billing records for the current AWS account for a specified period
Example ¶
package main import ( "fmt" "time" "github.com/aws/aws-sdk-go/aws" "github.com/aws/aws-sdk-go/aws/session" "github.com/aws/aws-sdk-go/service/route53domains" ) func main() { sess, err := session.NewSession() if err != nil { fmt.Println("failed to create session,", err) return } svc := route53domains.New(sess) params := &route53domains.ViewBillingInput{ End: aws.Time(time.Now()), Marker: aws.String("PageMarker"), MaxItems: aws.Int64(1), Start: aws.Time(time.Now()), } resp, err := svc.ViewBilling(params) if err != nil { // Print the error, cast err to awserr.Error to get the Code and // Message from an error. fmt.Println(err.Error()) return } // Pretty-print the response data. fmt.Println(resp) }
Output:
func (*Route53Domains) ViewBillingRequest ¶
func (c *Route53Domains) ViewBillingRequest(input *ViewBillingInput) (req *request.Request, output *ViewBillingOutput)
ViewBillingRequest generates a "aws/request.Request" representing the client's request for the ViewBilling operation. The "output" return value can be used to capture response data after the request's "Send" method is called.
Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the ViewBilling method directly instead.
Note: You must call the "Send" method on the returned request object in order to execute the request.
// Example sending a request using the ViewBillingRequest method. req, resp := client.ViewBillingRequest(params) err := req.Send() if err == nil { // resp is now filled fmt.Println(resp) }
type Tag ¶
type Tag struct { // The key (name) of a tag. // // Type: String // // Default: None // // Valid values: A-Z, a-z, 0-9, space, ".:/=+\-@" // // Constraints: Each key can be 1-128 characters long. // // Required: Yes Key *string `type:"string"` // The value of a tag. // // Type: String // // Default: None // // Valid values: A-Z, a-z, 0-9, space, ".:/=+\-@" // // Constraints: Each value can be 0-256 characters long. // // Required: Yes Value *string `type:"string"` // contains filtered or unexported fields }
Each tag includes the following elements.
type TransferDomainInput ¶
type TransferDomainInput struct { // Provides detailed contact information. // // Type: Complex // // Children: FirstName, MiddleName, LastName, ContactType, OrganizationName, // AddressLine1, AddressLine2, City, State, CountryCode, ZipCode, PhoneNumber, // Email, Fax, ExtraParams // // Required: Yes AdminContact *ContactDetail `type:"structure" required:"true"` // The authorization code for the domain. You get this value from the current // registrar. // // Type: String // // Required: Yes AuthCode *string `type:"string"` // Indicates whether the domain will be automatically renewed (true) or not // (false). Autorenewal only takes effect after the account is charged. // // Type: Boolean // // Valid values: true | false // // Default: true // // Required: No AutoRenew *bool `type:"boolean"` // The name of a domain. // // Type: String // // Default: None // // Constraints: The domain name can contain only the letters a through z, the // numbers 0 through 9, and hyphen (-). Internationalized Domain Names are not // supported. // // Required: Yes DomainName *string `type:"string" required:"true"` // The number of years the domain will be registered. Domains are registered // for a minimum of one year. The maximum period depends on the top-level domain. // // Type: Integer // // Default: 1 // // Valid values: Integer from 1 to 10 // // Required: Yes DurationInYears *int64 `min:"1" type:"integer" required:"true"` // Reserved for future use. IdnLangCode *string `type:"string"` // Contains details for the host and glue IP addresses. // // Type: Complex // // Children: GlueIps, Name // // Required: No Nameservers []*Nameserver `type:"list"` // Whether you want to conceal contact information from WHOIS queries. If you // specify true, WHOIS ("who is") queries will return contact information for // our registrar partner, Gandi, instead of the contact information that you // enter. // // Type: Boolean // // Default: true // // Valid values: true | false // // Required: No PrivacyProtectAdminContact *bool `type:"boolean"` // Whether you want to conceal contact information from WHOIS queries. If you // specify true, WHOIS ("who is") queries will return contact information for // our registrar partner, Gandi, instead of the contact information that you // enter. // // Type: Boolean // // Default: true // // Valid values: true | false // // Required: No PrivacyProtectRegistrantContact *bool `type:"boolean"` // Whether you want to conceal contact information from WHOIS queries. If you // specify true, WHOIS ("who is") queries will return contact information for // our registrar partner, Gandi, instead of the contact information that you // enter. // // Type: Boolean // // Default: true // // Valid values: true | false // // Required: No PrivacyProtectTechContact *bool `type:"boolean"` // Provides detailed contact information. // // Type: Complex // // Children: FirstName, MiddleName, LastName, ContactType, OrganizationName, // AddressLine1, AddressLine2, City, State, CountryCode, ZipCode, PhoneNumber, // Email, Fax, ExtraParams // // Required: Yes RegistrantContact *ContactDetail `type:"structure" required:"true"` // Provides detailed contact information. // // Type: Complex // // Children: FirstName, MiddleName, LastName, ContactType, OrganizationName, // AddressLine1, AddressLine2, City, State, CountryCode, ZipCode, PhoneNumber, // Email, Fax, ExtraParams // // Required: Yes TechContact *ContactDetail `type:"structure" required:"true"` // contains filtered or unexported fields }
The TransferDomain request includes the following elements.
func (TransferDomainInput) GoString ¶
func (s TransferDomainInput) GoString() string
GoString returns the string representation
func (TransferDomainInput) String ¶
func (s TransferDomainInput) String() string
String returns the string representation
func (*TransferDomainInput) Validate ¶
func (s *TransferDomainInput) Validate() error
Validate inspects the fields of the type to determine if they are valid.
type TransferDomainOutput ¶
type TransferDomainOutput struct { // Identifier for tracking the progress of the request. To use this ID to query // the operation status, use GetOperationDetail. // // Type: String // // Default: None // // Constraints: Maximum 255 characters. OperationId *string `type:"string" required:"true"` // contains filtered or unexported fields }
The TranserDomain response includes the following element.
func (TransferDomainOutput) GoString ¶
func (s TransferDomainOutput) GoString() string
GoString returns the string representation
func (TransferDomainOutput) String ¶
func (s TransferDomainOutput) String() string
String returns the string representation
type UpdateDomainContactInput ¶
type UpdateDomainContactInput struct { // Provides detailed contact information. // // Type: Complex // // Children: FirstName, MiddleName, LastName, ContactType, OrganizationName, // AddressLine1, AddressLine2, City, State, CountryCode, ZipCode, PhoneNumber, // Email, Fax, ExtraParams // // Required: Yes AdminContact *ContactDetail `type:"structure"` // The name of a domain. // // Type: String // // Default: None // // Constraints: The domain name can contain only the letters a through z, the // numbers 0 through 9, and hyphen (-). Internationalized Domain Names are not // supported. // // Required: Yes DomainName *string `type:"string" required:"true"` // Provides detailed contact information. // // Type: Complex // // Children: FirstName, MiddleName, LastName, ContactType, OrganizationName, // AddressLine1, AddressLine2, City, State, CountryCode, ZipCode, PhoneNumber, // Email, Fax, ExtraParams // // Required: Yes RegistrantContact *ContactDetail `type:"structure"` // Provides detailed contact information. // // Type: Complex // // Children: FirstName, MiddleName, LastName, ContactType, OrganizationName, // AddressLine1, AddressLine2, City, State, CountryCode, ZipCode, PhoneNumber, // Email, Fax, ExtraParams // // Required: Yes TechContact *ContactDetail `type:"structure"` // contains filtered or unexported fields }
The UpdateDomainContact request includes the following elements.
func (UpdateDomainContactInput) GoString ¶
func (s UpdateDomainContactInput) GoString() string
GoString returns the string representation
func (UpdateDomainContactInput) String ¶
func (s UpdateDomainContactInput) String() string
String returns the string representation
func (*UpdateDomainContactInput) Validate ¶
func (s *UpdateDomainContactInput) Validate() error
Validate inspects the fields of the type to determine if they are valid.
type UpdateDomainContactOutput ¶
type UpdateDomainContactOutput struct { // Identifier for tracking the progress of the request. To use this ID to query // the operation status, use GetOperationDetail. // // Type: String // // Default: None // // Constraints: Maximum 255 characters. OperationId *string `type:"string" required:"true"` // contains filtered or unexported fields }
The UpdateDomainContact response includes the following element.
func (UpdateDomainContactOutput) GoString ¶
func (s UpdateDomainContactOutput) GoString() string
GoString returns the string representation
func (UpdateDomainContactOutput) String ¶
func (s UpdateDomainContactOutput) String() string
String returns the string representation
type UpdateDomainContactPrivacyInput ¶
type UpdateDomainContactPrivacyInput struct { // Whether you want to conceal contact information from WHOIS queries. If you // specify true, WHOIS ("who is") queries will return contact information for // our registrar partner, Gandi, instead of the contact information that you // enter. // // Type: Boolean // // Default: None // // Valid values: true | false // // Required: No AdminPrivacy *bool `type:"boolean"` // The name of a domain. // // Type: String // // Default: None // // Constraints: The domain name can contain only the letters a through z, the // numbers 0 through 9, and hyphen (-). Internationalized Domain Names are not // supported. // // Required: Yes DomainName *string `type:"string" required:"true"` // Whether you want to conceal contact information from WHOIS queries. If you // specify true, WHOIS ("who is") queries will return contact information for // our registrar partner, Gandi, instead of the contact information that you // enter. // // Type: Boolean // // Default: None // // Valid values: true | false // // Required: No RegistrantPrivacy *bool `type:"boolean"` // Whether you want to conceal contact information from WHOIS queries. If you // specify true, WHOIS ("who is") queries will return contact information for // our registrar partner, Gandi, instead of the contact information that you // enter. // // Type: Boolean // // Default: None // // Valid values: true | false // // Required: No TechPrivacy *bool `type:"boolean"` // contains filtered or unexported fields }
The UpdateDomainContactPrivacy request includes the following elements.
func (UpdateDomainContactPrivacyInput) GoString ¶
func (s UpdateDomainContactPrivacyInput) GoString() string
GoString returns the string representation
func (UpdateDomainContactPrivacyInput) String ¶
func (s UpdateDomainContactPrivacyInput) String() string
String returns the string representation
func (*UpdateDomainContactPrivacyInput) Validate ¶
func (s *UpdateDomainContactPrivacyInput) Validate() error
Validate inspects the fields of the type to determine if they are valid.
type UpdateDomainContactPrivacyOutput ¶
type UpdateDomainContactPrivacyOutput struct { // Identifier for tracking the progress of the request. To use this ID to query // the operation status, use GetOperationDetail. // // Type: String // // Default: None // // Constraints: Maximum 255 characters. OperationId *string `type:"string" required:"true"` // contains filtered or unexported fields }
The UpdateDomainContactPrivacy response includes the following element.
func (UpdateDomainContactPrivacyOutput) GoString ¶
func (s UpdateDomainContactPrivacyOutput) GoString() string
GoString returns the string representation
func (UpdateDomainContactPrivacyOutput) String ¶
func (s UpdateDomainContactPrivacyOutput) String() string
String returns the string representation
type UpdateDomainNameserversInput ¶
type UpdateDomainNameserversInput struct { // The name of a domain. // // Type: String // // Default: None // // Constraints: The domain name can contain only the letters a through z, the // numbers 0 through 9, and hyphen (-). Internationalized Domain Names are not // supported. // // Required: Yes DomainName *string `type:"string" required:"true"` // The authorization key for .fi domains FIAuthKey *string `type:"string"` // A list of new name servers for the domain. // // Type: Complex // // Children: Name, GlueIps // // Required: Yes Nameservers []*Nameserver `type:"list" required:"true"` // contains filtered or unexported fields }
The UpdateDomainNameserver request includes the following elements.
func (UpdateDomainNameserversInput) GoString ¶
func (s UpdateDomainNameserversInput) GoString() string
GoString returns the string representation
func (UpdateDomainNameserversInput) String ¶
func (s UpdateDomainNameserversInput) String() string
String returns the string representation
func (*UpdateDomainNameserversInput) Validate ¶
func (s *UpdateDomainNameserversInput) Validate() error
Validate inspects the fields of the type to determine if they are valid.
type UpdateDomainNameserversOutput ¶
type UpdateDomainNameserversOutput struct { // Identifier for tracking the progress of the request. To use this ID to query // the operation status, use GetOperationDetail. // // Type: String // // Default: None // // Constraints: Maximum 255 characters. OperationId *string `type:"string" required:"true"` // contains filtered or unexported fields }
The UpdateDomainNameservers response includes the following element.
func (UpdateDomainNameserversOutput) GoString ¶
func (s UpdateDomainNameserversOutput) GoString() string
GoString returns the string representation
func (UpdateDomainNameserversOutput) String ¶
func (s UpdateDomainNameserversOutput) String() string
String returns the string representation
type UpdateTagsForDomainInput ¶
type UpdateTagsForDomainInput struct { // The domain for which you want to add or update tags. // // The name of a domain. // // Type: String // // Default: None // // Constraints: The domain name can contain only the letters a through z, the // numbers 0 through 9, and hyphen (-). Hyphens are allowed only when they're // surrounded by letters, numbers, or other hyphens. You can't specify a hyphen // at the beginning or end of a label. To specify an Internationalized Domain // Name, you must convert the name to Punycode. // // Required: Yes DomainName *string `type:"string" required:"true"` // A list of the tag keys and values that you want to add or update. If you // specify a key that already exists, the corresponding value will be replaced. // // Type: A complex type containing a list of tags // // Default: None // // Required: No // // '> Each tag includes the following elements: // // Key // // The key (name) of a tag. // // Type: String // // Default: None // // Valid values: Unicode characters including alphanumeric, space, and ".:/=+\-@" // // Constraints: Each key can be 1-128 characters long. // // Required: Yes // // Value // // The value of a tag. // // Type: String // // Default: None // // Valid values: Unicode characters including alphanumeric, space, and ".:/=+\-@" // // Constraints: Each value can be 0-256 characters long. // // Required: Yes TagsToUpdate []*Tag `type:"list"` // contains filtered or unexported fields }
The UpdateTagsForDomainRequest includes the following elements.
func (UpdateTagsForDomainInput) GoString ¶
func (s UpdateTagsForDomainInput) GoString() string
GoString returns the string representation
func (UpdateTagsForDomainInput) String ¶
func (s UpdateTagsForDomainInput) String() string
String returns the string representation
func (*UpdateTagsForDomainInput) Validate ¶
func (s *UpdateTagsForDomainInput) Validate() error
Validate inspects the fields of the type to determine if they are valid.
type UpdateTagsForDomainOutput ¶
type UpdateTagsForDomainOutput struct {
// contains filtered or unexported fields
}
func (UpdateTagsForDomainOutput) GoString ¶
func (s UpdateTagsForDomainOutput) GoString() string
GoString returns the string representation
func (UpdateTagsForDomainOutput) String ¶
func (s UpdateTagsForDomainOutput) String() string
String returns the string representation
type ViewBillingInput ¶
type ViewBillingInput struct { // The end date and time for the time period for which you want a list of billing // records. Specify the date in Unix time format. // // Type: Double // // Default: None // // Required: Yes End *time.Time `type:"timestamp" timestampFormat:"unix"` // For an initial request for a list of billing records, omit this element. // If the number of billing records that are associated with the current AWS // account during the specified period is greater than the value that you specified // for MaxItems, you can use Marker to return additional billing records. Get // the value of NextPageMarker from the previous response, and submit another // request that includes the value of NextPageMarker in the Marker element. // // Type: String // // Default: None // // Constraints: The marker must match the value of NextPageMarker that was // returned in the previous response. // // Required: No Marker *string `type:"string"` // The number of billing records to be returned. // // Type: Integer // // Default: 20 // // Constraints: A value between 1 and 100. // // Required: No MaxItems *int64 `type:"integer"` // The beginning date and time for the time period for which you want a list // of billing records. Specify the date in Unix time format. // // Type: Double // // Default: None // // Required: Yes Start *time.Time `type:"timestamp" timestampFormat:"unix"` // contains filtered or unexported fields }
The ViewBilling request includes the following elements.
func (ViewBillingInput) GoString ¶
func (s ViewBillingInput) GoString() string
GoString returns the string representation
func (ViewBillingInput) String ¶
func (s ViewBillingInput) String() string
String returns the string representation
type ViewBillingOutput ¶
type ViewBillingOutput struct { // A summary of billing records. // // Type: Complex type containing a list of billing record summaries. // // Children: DomainName, Operation, InvoiceId, BillDate and Price BillingRecords []*BillingRecord `type:"list"` // If there are more billing records than you specified for MaxItems in the // request, submit another request and include the value of NextPageMarker in // the value of Marker. // // Type: String // // Parent: BillingRecords NextPageMarker *string `type:"string"` // contains filtered or unexported fields }
The ViewBilling response includes the following elements.
func (ViewBillingOutput) GoString ¶
func (s ViewBillingOutput) GoString() string
GoString returns the string representation
func (ViewBillingOutput) String ¶
func (s ViewBillingOutput) String() string
String returns the string representation
Directories ¶
Path | Synopsis |
---|---|
Package route53domainsiface provides an interface for the Amazon Route 53 Domains.
|
Package route53domainsiface provides an interface for the Amazon Route 53 Domains. |