mavlink

README

Mavlink

For information on the MAVlink communication protocol click here.

This package supports Mavlink over serial (such as a SiK modem) and Mavlink over UDP (such as via mavproxy). Serial is useful for point to point links, and UDP is useful for where you have multiple simultaneous clients such as the robot and QGroundControl.

As at 2017-04, this package supports Mavlink 1.0 only. If the robot doesn't receiving data then check that the other devices are configured to send version 1.0 frames.

How to Install

go get -d -u gobot.io/x/gobot/...

How to Use

package main

import (
	"fmt"

	"gobot.io/x/gobot"
	"gobot.io/x/gobot/platforms/mavlink"
	common "gobot.io/x/gobot/platforms/mavlink/common"
)

func main() {
	adaptor := mavlink.NewAdaptor("/dev/ttyACM0")
	iris := mavlink.NewDriver(adaptor)

	work := func() {
		gobot.Once(iris.Event("packet"), func(data interface{}) {
			packet := data.(*common.MAVLinkPacket)

			dataStream := common.NewRequestDataStream(100,
				packet.SystemID,
				packet.ComponentID,
				4,
				1,
			)
			iris.SendPacket(common.CraftMAVLinkPacket(packet.SystemID,
				packet.ComponentID,
				dataStream,
			))
		})

		gobot.On(iris.Event("message"), func(data interface{}) {
			if data.(common.MAVLinkMessage).Id() == 30 {
				message := data.(*common.Attitude)
				fmt.Println("Attitude")
				fmt.Println("TIME_BOOT_MS", message.TIME_BOOT_MS)
				fmt.Println("ROLL", message.ROLL)
				fmt.Println("PITCH", message.PITCH)
				fmt.Println("YAW", message.YAW)
				fmt.Println("ROLLSPEED", message.ROLLSPEED)
				fmt.Println("PITCHSPEED", message.PITCHSPEED)
				fmt.Println("YAWSPEED", message.YAWSPEED)
				fmt.Println("")
			}
		})
	}

	robot := gobot.NewRobot("mavBot",
		[]gobot.Connection{adaptor},
		[]gobot.Device{iris},
		work,
	)

	robot.Start()
}

How to use: UDP

	adaptor := mavlink.NewUDPAdaptor(":14550")

To test, install Mavproxy and set it up to listen on serial and repeat over UDP:

$ mavproxy.py --out=udpbcast:192.168.0.255:14550

Change the address to the broadcast address of your subnet.

Documentation

Overview

Package mavlink contains the Gobot adaptor and driver for the MAVlink Communication Protocol.

Installing:

go get gobot.io/x/gobot/platforms/mavlink

Example:

package main

import (
	"fmt"

	"gobot.io/x/gobot"
	"gobot.io/x/gobot/platforms/mavlink"
	common "gobot.io/x/gobot/platforms/mavlink/common"
)

func main() {
	adaptor := mavlink.NewAdaptor("/dev/ttyACM0")
	iris := mavlink.NewDriver(adaptor)

	work := func() {
		iris.Once(iris.Event("packet"), func(data interface{}) {
			packet := data.(*common.MAVLinkPacket)

			dataStream := common.NewRequestDataStream(100,
				packet.SystemID,
				packet.ComponentID,
				4,
				1,
			)
			iris.SendPacket(common.CraftMAVLinkPacket(packet.SystemID,
				packet.ComponentID,
				dataStream,
			))
		})

		iris.On(iris.Event("message"), func(data interface{}) {
			if data.(common.MAVLinkMessage).Id() == 30 {
				message := data.(*common.Attitude)
				fmt.Println("Attitude")
				fmt.Println("TIME_BOOT_MS", message.TIME_BOOT_MS)
				fmt.Println("ROLL", message.ROLL)
				fmt.Println("PITCH", message.PITCH)
				fmt.Println("YAW", message.YAW)
				fmt.Println("ROLLSPEED", message.ROLLSPEED)
				fmt.Println("PITCHSPEED", message.PITCHSPEED)
				fmt.Println("YAWSPEED", message.YAWSPEED)
				fmt.Println("")
			}
		})
	}

	robot := gobot.NewRobot("mavBot",
		[]gobot.Connection{adaptor},
		[]gobot.Device{iris},
		work,
	)

	robot.Start()
}

For further information refer to mavlink README: https://github.com/hybridgroup/gobot/blob/master/platforms/mavlink/README.md

Index

• Constants
• type Adaptor
  • func NewAdaptor(port string) *Adaptor
  • func (m *Adaptor) Connect() (err error)
  • func (m *Adaptor) Finalize() (err error)
  • func (m *Adaptor) Name() string
  • func (m *Adaptor) Port() string
  • func (m *Adaptor) ReadMAVLinkPacket() (*common.MAVLinkPacket, error)
  • func (m *Adaptor) SetName(n string)
  • func (m *Adaptor) Write(b []byte) (int, error)
• type BaseAdaptor
• type Driver
  • func NewDriver(a BaseAdaptor, v ...time.Duration) *Driver
  • func (m *Driver) Connection() gobot.Connection
  • func (m *Driver) Halt() (err error)
  • func (m *Driver) Name() string
  • func (m *Driver) SendPacket(packet *common.MAVLinkPacket) (err error)
  • func (m *Driver) SetName(n string)
  • func (m *Driver) Start() error
• type MavlinkInterface
• type UDPAdaptor
  • func NewUDPAdaptor(port string) *UDPAdaptor
  • func (m *UDPAdaptor) Connect() error
  • func (m *UDPAdaptor) Finalize() (err error)
  • func (m *UDPAdaptor) Name() string
  • func (m *UDPAdaptor) Port() string
  • func (m *UDPAdaptor) ReadMAVLinkPacket() (*common.MAVLinkPacket, error)
  • func (m *UDPAdaptor) SetName(n string)
  • func (m *UDPAdaptor) Write(b []byte) (int, error)
• type UDPConnection

Constants

const (
	// PacketEvent event
	PacketEvent = "packet"
	// MessageEvent event
	MessageEvent = "message"
	// ErrorIOEEvent event
	ErrorIOEvent = "errorIO"
	// ErrorMAVLinkEvent event
	ErrorMAVLinkEvent = "errorMAVLink"
)

Types

type Adaptor

type Adaptor struct {
	// contains filtered or unexported fields
}

Adaptor is a Mavlink-over-serial adaptor.

func NewAdaptor

func NewAdaptor(port string) *Adaptor

NewAdaptor creates a new mavlink adaptor with specified port

func (*Adaptor) Connect

func (m *Adaptor) Connect() (err error)

Connect returns true if connection to device is successful

func (*Adaptor) Finalize

func (m *Adaptor) Finalize() (err error)

Finalize returns true if connection to devices is closed successfully

func (*Adaptor) Name

func (m *Adaptor) Name() string

func (*Adaptor) Port

func (m *Adaptor) Port() string

func (*Adaptor) ReadMAVLinkPacket

func (m *Adaptor) ReadMAVLinkPacket() (*common.MAVLinkPacket, error)

func (*Adaptor) SetName

func (m *Adaptor) SetName(n string)

func (*Adaptor) Write

func (m *Adaptor) Write(b []byte) (int, error)

type BaseAdaptor

type BaseAdaptor interface {
	gobot.Connection

	io.Writer
	ReadMAVLinkPacket() (*common.MAVLinkPacket, error)
}

Adaptor is a Mavlink transport adaptor.

type Driver

type Driver struct {
	gobot.Eventer
	// contains filtered or unexported fields
}

func NewDriver

func NewDriver(a BaseAdaptor, v ...time.Duration) *Driver

NewDriver creates a new mavlink driver.

It add the following events:

"packet" - triggered when a new packet is read
"message" - triggered when a new valid message is processed

func (*Driver) Connection

func (m *Driver) Connection() gobot.Connection

func (*Driver) Halt

func (m *Driver) Halt() (err error)

Halt returns true if device is halted successfully

func (*Driver) Name

func (m *Driver) Name() string

func (*Driver) SendPacket

func (m *Driver) SendPacket(packet *common.MAVLinkPacket) (err error)

SendPacket sends a packet to mavlink device

func (*Driver) SetName

func (m *Driver) SetName(n string)

func (*Driver) Start

func (m *Driver) Start() error

Start begins process to read mavlink packets every m.Interval and process them

type MavlinkInterface

type MavlinkInterface interface {
}

type UDPAdaptor

type UDPAdaptor struct {
	// contains filtered or unexported fields
}

func NewUDPAdaptor

func NewUDPAdaptor(port string) *UDPAdaptor

NewAdaptor creates a new Mavlink-over-UDP adaptor with specified port.

func (*UDPAdaptor) Connect

func (m *UDPAdaptor) Connect() error

Connect returns true if connection to device is successful

func (*UDPAdaptor) Finalize

func (m *UDPAdaptor) Finalize() (err error)

Finalize returns true if connection to devices is closed successfully

func (*UDPAdaptor) Name

func (m *UDPAdaptor) Name() string

func (*UDPAdaptor) Port

func (m *UDPAdaptor) Port() string

func (*UDPAdaptor) ReadMAVLinkPacket

func (m *UDPAdaptor) ReadMAVLinkPacket() (*common.MAVLinkPacket, error)

func (*UDPAdaptor) SetName

func (m *UDPAdaptor) SetName(n string)

func (*UDPAdaptor) Write

func (m *UDPAdaptor) Write(b []byte) (int, error)

type UDPConnection

type UDPConnection interface {
	Close() error
	ReadFromUDP([]byte) (int, *net.UDPAddr, error)
	WriteTo([]byte, net.Addr) (int, error)
}