sha3

package
v0.0.0-...-4223e8c Latest Latest
Warning

This package is not in the latest version of its module.

Go to latest
Published: Jun 21, 2023 License: BSD-3-Clause Imports: 2 Imported by: 0

Documentation

Overview

Package sha3 implements the SHA-3 fixed-output-length hash functions and the SHAKE variable-output-length hash functions defined by FIPS-202.

Both types of hash function use the "sponge" construction and the Keccak permutation. For a detailed specification see http://keccak.noekeon.org/

Guidance

If you aren't sure what function you need, use SHAKE256 with at least 64 bytes of output. The SHAKE instances are faster than the SHA3 instances; the latter have to allocate memory to conform to the hash.Hash interface.

If you need a secret-key MAC (message authentication code), prepend the secret key to the input, hash with SHAKE256 and read at least 32 bytes of output.

Security strengths

The SHA3-x (x equals 224, 256, 384, or 512) functions have a security strength against preimage attacks of x bits. Since they only produce "x" bits of output, their collision-resistance is only "x/2" bits.

The SHAKE-256 and -128 functions have a generic security strength of 256 and 128 bits against all attacks, provided that at least 2x bits of their output is used. Requesting more than 64 or 32 bytes of output, respectively, does not increase the collision-resistance of the SHAKE functions.

The sponge construction

A sponge builds a pseudo-random function from a public pseudo-random permutation, by applying the permutation to a state of "rate + capacity" bytes, but hiding "capacity" of the bytes.

A sponge starts out with a zero state. To hash an input using a sponge, up to "rate" bytes of the input are XORed into the sponge's state. The sponge is then "full" and the permutation is applied to "empty" it. This process is repeated until all the input has been "absorbed". The input is then padded. The digest is "squeezed" from the sponge in the same way, except that output is copied out instead of input being XORed in.

A sponge is parameterized by its generic security strength, which is equal to half its capacity; capacity + rate is equal to the permutation's width. Since the KeccakF-1600 permutation is 1600 bits (200 bytes) wide, this means that the security strength of a sponge instance is equal to (1600 - bitrate) / 2.

Recommendations

The SHAKE functions are recommended for most new uses. They can produce output of arbitrary length. SHAKE256, with an output length of at least 64 bytes, provides 256-bit security against all attacks. The Keccak team recommends it for most applications upgrading from SHA2-512. (NIST chose a much stronger, but much slower, sponge instance for SHA3-512.)

The SHA-3 functions are "drop-in" replacements for the SHA-2 functions. They produce output of the same length, with the same security strengths against all attacks. This means, in particular, that SHA3-256 only has 128-bit collision resistance, because its output length is 32 bytes.

Example (Mac)
k := []byte("this is a secret key; you should generate a strong random key that's at least 32 bytes long")
buf := []byte("and this is some data to authenticate")
// A MAC with 32 bytes of output has 256-bit security strength -- if you use at least a 32-byte-long key.
h := make([]byte, 32)
d := NewShake256()
// Write the key into the hash.
_, _ = d.Write(k)
// Now write the data.
_, _ = d.Write(buf)
// Read 32 bytes of output from the hash into h.
_, _ = d.Read(h)
fmt.Printf("%x\n", h)
Output:

78de2974bd2711d5549ffd32b753ef0f5fa80a0db2556db60f0987eb8a9218ff
Example (Sum)
buf := []byte("some data to hash")
// A hash needs to be 64 bytes long to have 256-bit collision resistance.
h := make([]byte, 64)
// Compute a 64-byte hash of buf and put it in h.
ShakeSum256(h, buf)
fmt.Printf("%x\n", h)
Output:

0f65fe41fc353e52c55667bb9e2b27bfcc8476f2c413e9437d272ee3194a4e3146d05ec04a25d16b8f577c19b82d16b1424c3e022e783d2b4da98de3658d363d

Index

Examples

Constants

This section is empty.

Variables

View Source
var RC = [24]uint64{
	0x0000000000000001,
	0x0000000000008082,
	0x800000000000808A,
	0x8000000080008000,
	0x000000000000808B,
	0x0000000080000001,
	0x8000000080008081,
	0x8000000000008009,
	0x000000000000008A,
	0x0000000000000088,
	0x0000000080008009,
	0x000000008000000A,
	0x000000008000808B,
	0x800000000000008B,
	0x8000000000008089,
	0x8000000000008003,
	0x8000000000008002,
	0x8000000000000080,
	0x000000000000800A,
	0x800000008000000A,
	0x8000000080008081,
	0x8000000000008080,
	0x0000000080000001,
	0x8000000080008008,
}

RC stores the round constants for use in the ι step.

Functions

func KeccakF1600

func KeccakF1600(a *[25]uint64, turbo bool)

KeccakF1600 applies the Keccak permutation to a 1600b-wide state represented as a slice of 25 uint64s. If turbo is true, applies the 12-round variant instead of the regular 24-round variant. nolint:funlen

func ShakeSum128

func ShakeSum128(hash, data []byte)

ShakeSum128 writes an arbitrary-length digest of data into hash.

func ShakeSum256

func ShakeSum256(hash, data []byte)

ShakeSum256 writes an arbitrary-length digest of data into hash.

func Sum224

func Sum224(data []byte) (digest [28]byte)

Sum224 returns the SHA3-224 digest of the data.

func Sum256

func Sum256(data []byte) (digest [32]byte)

Sum256 returns the SHA3-256 digest of the data.

func Sum384

func Sum384(data []byte) (digest [48]byte)

Sum384 returns the SHA3-384 digest of the data.

func Sum512

func Sum512(data []byte) (digest [64]byte)

Sum512 returns the SHA3-512 digest of the data.

func TurboShakeSum128

func TurboShakeSum128(hash, data []byte, D byte)

TurboShakeSum128 writes an arbitrary-length digest of data into hash.

func TurboShakeSum256

func TurboShakeSum256(hash, data []byte, D byte)

TurboShakeSum256 writes an arbitrary-length digest of data into hash.

Types

type ShakeHash

type ShakeHash interface {
	// Write absorbs more data into the hash's state. It panics if input is
	// written to it after output has been read from it.
	io.Writer

	// Read reads more output from the hash; reading affects the hash's
	// state. (ShakeHash.Read is thus very different from Hash.Sum)
	// It never returns an error.
	io.Reader

	// Clone returns a copy of the ShakeHash in its current state.
	Clone() ShakeHash

	// Reset resets the ShakeHash to its initial state.
	Reset()
}

ShakeHash defines the interface to hash functions that support arbitrary-length output.

type State

type State struct {
	// contains filtered or unexported fields
}

func New224

func New224() State

New224 creates a new SHA3-224 hash. Its generic security strength is 224 bits against preimage attacks, and 112 bits against collision attacks.

func New256

func New256() State

New256 creates a new SHA3-256 hash. Its generic security strength is 256 bits against preimage attacks, and 128 bits against collision attacks.

func New384

func New384() State

New384 creates a new SHA3-384 hash. Its generic security strength is 384 bits against preimage attacks, and 192 bits against collision attacks.

func New512

func New512() State

New512 creates a new SHA3-512 hash. Its generic security strength is 512 bits against preimage attacks, and 256 bits against collision attacks.

func NewShake128

func NewShake128() State

NewShake128 creates a new SHAKE128 variable-output-length ShakeHash. Its generic security strength is 128 bits against all attacks if at least 32 bytes of its output are used.

func NewShake256

func NewShake256() State

NewShake256 creates a new SHAKE256 variable-output-length ShakeHash. Its generic security strength is 256 bits against all attacks if at least 64 bytes of its output are used.

func NewTurboShake128

func NewTurboShake128(D byte) State

NewTurboShake128 creates a new TurboSHAKE128 variable-output-length ShakeHash. Its generic security strength is 128 bits against all attacks if at least 32 bytes of its output are used. D is the domain separation byte and must be between 0x01 and 0x7f inclusive.

func NewTurboShake256

func NewTurboShake256(D byte) State

NewTurboShake256 creates a new TurboSHAKE256 variable-output-length ShakeHash. Its generic security strength is 256 bits against all attacks if at least 64 bytes of its output are used. D is the domain separation byte and must be between 0x01 and 0x7f inclusive.

func (*State) BlockSize

func (d *State) BlockSize() int

BlockSize returns the rate of sponge underlying this hash function.

func (*State) Clone

func (d *State) Clone() ShakeHash

Clone returns copy of SHAKE context within its current state.

func (*State) IsAbsorbing

func (d *State) IsAbsorbing() bool

func (*State) Read

func (d *State) Read(out []byte) (n int, err error)

Read squeezes an arbitrary number of bytes from the sponge.

func (*State) Reset

func (d *State) Reset()

Reset clears the internal state by zeroing the sponge state and the byte buffer, and setting Sponge.state to absorbing.

func (*State) Size

func (d *State) Size() int

Size returns the output size of the hash function in bytes.

func (*State) Sum

func (d *State) Sum(in []byte) []byte

Sum applies padding to the hash state and then squeezes out the desired number of output bytes.

func (*State) SwitchDS

func (d *State) SwitchDS(D byte)

func (*State) Write

func (d *State) Write(p []byte) (written int, err error)

Write absorbs more data into the hash's state. It produces an error if more data is written to the ShakeHash after writing

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL