cartridge

package
v0.35.2 Latest Latest
Warning

This package is not in the latest version of its module.

 Go to latest Published: Nov 23, 2024 License: GPL-3.0 Imports: 27 Imported by: 0

Documentation

Overview

Package cartridge fully implements loading of mapping of cartridge memory. Cartridge memory is memory that is peripheral to the VCS and can grow quite complex.

There are many different types of mapping scheme supported by the package.

Some cartridge types contain additional RAM but the main difference is how they map additional ROM into the relatively small address space available for cartridges in the VCS. This is called bank-switching. All of these differences are handled transparently by the package.

Currently supported cartridge types are listed in the cartridgeloader package.

Index

Constants

This section is empty.

Variables

View Source 
var Ejected = errors.New("cartridge ejected")

sentinal error returned if operation is on the ejected cartridge type.

Functions

This section is empty.

Types

type Cartridge 

type Cartridge struct {

	// filename/hash taken from cartridgeloader. choosing not to keep a
	// reference to the cartridge loader itself.
	Filename  string
	ShortName string
	Hash      string
	// contains filtered or unexported fields
}

Cartridge defines the information and operations for a VCS cartridge.

func NewCartridge 

func NewCartridge(env *environment.Environment) *Cartridge

NewCartridge is the preferred method of initialisation for the cartridge type.

func (*Cartridge) AccessPassive added in v0.20.0 

func (cart *Cartridge) AccessPassive(addr uint16, data uint8) error

AccessPassive is called so that the cartridge can respond to changes to the address and data bus even when the data bus is not addressed to the cartridge.

The VCS cartridge port is wired up to all 13 address lines of the 6507. Under normal operation, the chip-select line is used by the cartridge to know when to put data on the data bus. If it's not "on" then the cartridge does nothing.

However, regardless of the chip-select line, the address and data buses can be monitored for activity.

Notably the tigervision (3F) mapper monitors and waits for address 0x003f, which is in the TIA address space. When this address is triggered, the tigervision cartridge will use whatever is on the data bus to switch banks.

Similarly, the CBS (FA) mapper will switch banks on cartridge addresses 1ff8 to 1ffa (and mirrors) but only if the data bus has the low bit set to one.

func (*Cartridge) Attach 

func (cart *Cartridge) Attach(cartload cartridgeloader.Loader) error

Attach the cartridge loader to the VCS and make available the data to the CPU bus

How cartridges are mapped into the VCS's 4k space can differs dramatically. Much of the implementation details have been cribbed from Kevin Horton's "Cart Information" document [sizes.txt]. Other sources of information noted as appropriate.

func (*Cartridge) BusStuff added in v0.19.3 

func (cart *Cartridge) BusStuff() (uint8, bool)

BusStuff implements the mapper.CartBusStuff interface

func (*Cartridge) CoProcExecutionState added in v0.25.0 

func (cart *Cartridge) CoProcExecutionState() coprocessor.CoProcExecutionState

CoProcExecutionState implements the coprocessor.CartCoProcBus interface

If cartridge does not have a coprocessor then an empty instance of mapper.CoProcExecutionState is returned

func (*Cartridge) CommandExtension added in v0.35.0 

func (cart *Cartridge) CommandExtension(extension string) *commandline.Commands

CommandExtension returns an instance of commandline.Commands suitable for commandline tab-completion. Implements commandline.Extension interface

func (*Cartridge) ContainerID added in v0.15.0 

func (cart *Cartridge) ContainerID() string

Container returns the cartridge continer ID. If the cartridge is not in a container the empty string is returned.

func (*Cartridge) CopyBanks added in v0.7.1 

func (cart *Cartridge) CopyBanks() ([]mapper.BankContent, error)

CopyBanks returns the sequence of banks in a cartridge. To return the next bank in the sequence, call the function with the instance of mapper.BankContent returned from the previous call. The end of the sequence is indicated by the nil value. Start a new iteration with the nil argument.

func (*Cartridge) Eject 

func (cart *Cartridge) Eject()

Eject removes memory from cartridge space and unlike the real hardware, attaches a bank of empty memory - for convenience of the debugger.

func (*Cartridge) GetBank 

func (cart *Cartridge) GetBank(addr uint16) mapper.BankInfo

GetBank returns the current bank information for the specified address. See documentation for memorymap.Bank for more information.

func (*Cartridge) GetCartHotspotsBus added in v0.17.0 

func (cart *Cartridge) GetCartHotspotsBus() mapper.CartHotspotsBus

GetCartHotspotsBus returns interface to hotspots bus or nil if cartridge has no hotspots it wants to report.

func (*Cartridge) GetCartLabelsBus added in v0.17.0 

func (cart *Cartridge) GetCartLabelsBus() mapper.CartLabelsBus

GetCartHotspots returns interface to hotspots bus or nil if cartridge has no hotspots it wants to report.

func (*Cartridge) GetCoProc added in v0.19.3 

func (cart *Cartridge) GetCoProc() coprocessor.CartCoProc

GetCoProc returns interface to the coprocessor interface or nil if no coprocessor is available on the cartridge.

func (*Cartridge) GetCoProcBus added in v0.8.0 

func (cart *Cartridge) GetCoProcBus() coprocessor.CartCoProcBus

GetCoProcBus returns interface to the coprocessor interface or nil if no coprocessor is available on the cartridge.

func (*Cartridge) GetContainer added in v0.7.1 

func (cart *Cartridge) GetContainer() mapper.CartContainer

GetContainer returns interface to cartridge container or nil if cartridge is not in a container.

func (*Cartridge) GetRAMbus added in v0.2.1 

func (cart *Cartridge) GetRAMbus() mapper.CartRAMbus

GetRAMbus returns interface to ram busor nil if catridge contains no RAM.

func (*Cartridge) GetRegistersBus added in v0.3.1 

func (cart *Cartridge) GetRegistersBus() mapper.CartRegistersBus

GetRegistersBus returns interface to the registers of the cartridge or nil if cartridge has no registers.

func (*Cartridge) GetStaticBus added in v0.3.1 

func (cart *Cartridge) GetStaticBus() mapper.CartStaticBus

GetStaticBus returns interface to the static area of the cartridge or nil if cartridge has no static area.

func (*Cartridge) GetSuperchargerFastLoad added in v0.30.0 

func (cart *Cartridge) GetSuperchargerFastLoad() mapper.CartSuperChargerFastLoad

func (*Cartridge) GetTapeBus added in v0.7.1 

func (cart *Cartridge) GetTapeBus() mapper.CartTapeBus

GetTapeBus returns interface to a tape bus or nil if catridge has no tape.

func (*Cartridge) ID added in v0.2.1 

func (cart *Cartridge) ID() string

ID returns the cartridge mapping ID.

func (*Cartridge) IsEjected 

func (cart *Cartridge) IsEjected() bool

IsEjected returns true if no cartridge is attached.

func (*Cartridge) MappedBanks added in v0.15.0 

func (cart *Cartridge) MappedBanks() string

MappedBanks returns a string summary of the mapping. ie. what banks are mapped in.

func (*Cartridge) NumBanks 

func (cart *Cartridge) NumBanks() int

NumBanks returns the number of banks in the catridge.

func (*Cartridge) ParseCommand added in v0.35.0 

func (cart *Cartridge) ParseCommand(w io.Writer, command string) error

ParseCommand forwards a terminal command to the mapper

func (*Cartridge) Patch 

func (cart *Cartridge) Patch(offset int, data uint8) error

Patch implements the mapper.CartPatchable interface

func (*Cartridge) Peek 

func (cart *Cartridge) Peek(addr uint16) (uint8, error)

Peek is an implementation of memory.DebugBus. Address must be normalised.

func (*Cartridge) Plumb added in v0.7.1 

func (cart *Cartridge) Plumb(env *environment.Environment, fromDifferentEmulation bool)

Plumb makes sure everything is ship-shape after a rewind event.

The fromDifferentEmulation indicates that the State has been created by a different VCS emulation than the one being plumbed into.

See mapper.PlumbFromDifferentEmulation for how this affects mapper implementations.

func (*Cartridge) Poke 

func (cart *Cartridge) Poke(addr uint16, data uint8) error

Poke is an implementation of memory.DebugBus. Address must be normalised.

func (*Cartridge) ROMDump added in v0.19.3 

func (cart *Cartridge) ROMDump() (string, error)

ROMDump implements the mapper.CartROMDump interface.

func (*Cartridge) Read 

func (cart *Cartridge) Read(addr uint16) (uint8, uint8, error)

Read is an implementation of memory.CPUBus.

func (*Cartridge) Reset added in v0.7.1 

func (cart *Cartridge) Reset()

Reset volative contents of Cartridge.

func (*Cartridge) RewindBoundary added in v0.7.1 

func (cart *Cartridge) RewindBoundary() bool

RewindBoundary returns true if the cartridge indicates that something has happened that should not be part of the rewind history. Returns false if cartridge mapper does not care about the rewind sub-system.

func (*Cartridge) SetBank 

func (cart *Cartridge) SetBank(bank string) error

SetBank sets the current bank of the cartridge

func (*Cartridge) SetYieldHook added in v0.20.0 

func (cart *Cartridge) SetYieldHook(hook coprocessor.CartYieldHook)

SetYieldHook implements the coprocessor.CartCoProcBus interface.

func (*Cartridge) Snapshot added in v0.7.1 

func (cart *Cartridge) Snapshot() *Cartridge

Snapshot creates a copy of the current cartridge.

func (*Cartridge) Step added in v0.2.1 

func (cart *Cartridge) Step(clock float32)

Step should be called every CPU cycle. The attached cartridge may or may not change its state as a result. In fact, very few cartridges care about this.

func (*Cartridge) String 

func (cart *Cartridge) String() string

String returns a summary of the cartridge, it's mapper and any containers.

For just the filename use the Filename field or the ShortName field. Filename includes the path.

For just the mapping use the ID() function and for just the container ID use the ContainerID() function.

func (*Cartridge) Write 

func (cart *Cartridge) Write(addr uint16, data uint8) error

Write is an implementation of memory.CPUBus.

type DPCdataFetcher added in v0.2.1 

type DPCdataFetcher struct {
	Low    byte
	Hi     byte
	Top    byte
	Bottom byte

	// is the Low byte in the window between top and bottom
	Flag bool

	// music mode only used by data fetchers 4-7
	MusicMode bool
	OSCclock  bool
}

DPCdataFetcher represents a single DPC data fetcher.

type DPCregisters added in v0.2.1 

type DPCregisters struct {
	Fetcher [8]DPCdataFetcher

	// the current random number value
	RNG uint8
}

DPCregisters implements the mapper.CartRegisters interface.

func (DPCregisters) String added in v0.2.1 

func (r DPCregisters) String() string

Source Files

View all Source files

Directories

Path Synopsis
Package ace implements the ACE cartridge mapper.
 Package ace implements the ACE cartridge mapper.
arm
Package arm imlplements the ARM7TDMI instruction set as defined in the ARM7TDMI Instruction Set Reference:
 Package arm imlplements the ARM7TDMI instruction set as defined in the ARM7TDMI Instruction Set Reference:
architecture
Package architecture defines the Map type that is used to specify the differences in cartridge and ARM archtectures.
 Package architecture defines the Map type that is used to specify the differences in cartridge and ARM archtectures.
callfn
Package Callfn facilitates the ARM CALLFN process common to both DPC+ and CDF* cartridge mappers.
 Package Callfn facilitates the ARM CALLFN process common to both DPC+ and CDF* cartridge mappers.
fpu
peripherals
Package peripherals implements the optional modules that can make up the ARM processor.
 Package peripherals implements the optional modules that can make up the ARM processor.
Package cdf implemnents the various CDF type cartridge mappers including CDFJ.
 Package cdf implemnents the various CDF type cartridge mappers including CDFJ.
Package dpcplus implements the DPC+ cartridge mapper.
 Package dpcplus implements the DPC+ cartridge mapper.
Package ace implements the ELF cartridge mapper.
 Package ace implements the ELF cartridge mapper.
Package mapper contains the CartMapper interface.
 Package mapper contains the CartMapper interface.
Package moviecart implements the Movie Cart special cartridge type.
 Package moviecart implements the Movie Cart special cartridge type.
Package plusrom implements the PlusROM cartridge as developed by Wolfgang Stubig.
 Package plusrom implements the PlusROM cartridge as developed by Wolfgang Stubig.
plusnet
Package plusnet contains details of the PlusNET protocol.
 Package plusnet contains details of the PlusNET protocol.
Package supercharger implements the tape based cartridge format.
 Package supercharger implements the tape based cartridge format.

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL
go.dev uses cookies from Google to deliver and enhance the quality of its services and to analyze traffic. Learn more.