socket_listener

package
v1.28.2 Latest Latest
Warning

This package is not in the latest version of its module.

Go to latest
Published: Oct 2, 2023 License: MIT Imports: 23 Imported by: 13

README

Socket Listener Input Plugin

The Socket Listener is a service input plugin that listens for messages from streaming (tcp, unix) or datagram (udp, unixgram) protocols.

The plugin expects messages in the Telegraf Input Data Formats.

Service Input

This plugin is a service input. Normal plugins gather metrics determined by the interval setting. Service plugins start a service to listens and waits for metrics or events to occur. Service plugins have two key differences from normal plugins:

  1. The global or plugin specific interval setting may not apply
  2. The CLI options of --test, --test-wait, and --once may not produce output for this plugin

Global configuration options

In addition to the plugin-specific configuration settings, plugins support additional global and plugin configuration settings. These settings are used to modify metrics, tags, and field or create aliases and configure ordering, etc. See the CONFIGURATION.md for more details.

Configuration

# Generic socket listener capable of handling multiple socket types.
[[inputs.socket_listener]]
  ## URL to listen on
  # service_address = "tcp://:8094"
  # service_address = "tcp://127.0.0.1:http"
  # service_address = "tcp4://:8094"
  # service_address = "tcp6://:8094"
  # service_address = "tcp6://[2001:db8::1]:8094"
  # service_address = "udp://:8094"
  # service_address = "udp4://:8094"
  # service_address = "udp6://:8094"
  # service_address = "unix:///tmp/telegraf.sock"
  # service_address = "unixgram:///tmp/telegraf.sock"

  ## Change the file mode bits on unix sockets.  These permissions may not be
  ## respected by some platforms, to safely restrict write permissions it is best
  ## to place the socket into a directory that has previously been created
  ## with the desired permissions.
  ##   ex: socket_mode = "777"
  # socket_mode = ""

  ## Maximum number of concurrent connections.
  ## Only applies to stream sockets (e.g. TCP).
  ## 0 (default) is unlimited.
  # max_connections = 1024

  ## Read timeout.
  ## Only applies to stream sockets (e.g. TCP).
  ## 0 (default) is unlimited.
  # read_timeout = "30s"

  ## Optional TLS configuration.
  ## Only applies to stream sockets (e.g. TCP).
  # tls_cert = "/etc/telegraf/cert.pem"
  # tls_key  = "/etc/telegraf/key.pem"
  ## Enables client authentication if set.
  # tls_allowed_cacerts = ["/etc/telegraf/clientca.pem"]

  ## Maximum socket buffer size (in bytes when no unit specified).
  ## For stream sockets, once the buffer fills up, the sender will start backing up.
  ## For datagram sockets, once the buffer fills up, metrics will start dropping.
  ## Defaults to the OS default.
  # read_buffer_size = "64KiB"

  ## Period between keep alive probes.
  ## Only applies to TCP sockets.
  ## 0 disables keep alive probes.
  ## Defaults to the OS configuration.
  # keep_alive_period = "5m"

  ## Data format to consume.
  ## Each data format has its own unique set of configuration options, read
  ## more about them here:
  ## https://github.com/influxdata/telegraf/blob/master/docs/DATA_FORMATS_INPUT.md
  # data_format = "influx"

  ## Content encoding for message payloads, can be set to "gzip" to or
  ## "identity" to apply no encoding.
  # content_encoding = "identity"

  ## Maximum size of decoded packet.
  ## Acceptable units are B, KiB, KB, MiB, MB...
  ## Without quotes and units, interpreted as size in bytes.
  # max_decompression_size = "500MB"

  ## Message splitting strategy and corresponding settings for stream sockets
  ## (tcp, tcp4, tcp6, unix or unixpacket). The setting is ignored for packet
  ## listeners such as udp.
  ## Available strategies are:
  ##   newline         -- split at newlines (default)
  ##   null            -- split at null bytes
  ##   delimiter       -- split at delimiter byte-sequence in hex-format
  ##                      given in `splitting_delimiter`
  ##   fixed length    -- split after number of bytes given in `splitting_length`
  ##   variable length -- split depending on length information received in the
  ##                      data. The length field information is specified in
  ##                      `splitting_length_field`.
  # splitting_strategy = "newline"

  ## Delimiter used to split received data to messages consumed by the parser.
  ## The delimiter is a hex byte-sequence marking the end of a message
  ## e.g. "0x0D0A", "x0d0a" or "0d0a" marks a Windows line-break (CR LF).
  ## The value is case-insensitive and can be specifed with "0x" or "x" prefix
  ## or withou.
  ## Note: This setting is only used for splitting_strategy = "delimiter".
  # splitting_delimiter = ""

  ## Fixed length of a message in bytes.
  ## Note: This setting is only used for splitting_strategy = "fixed length".
  # splitting_length = 0

  ## Specification of the length field contained in the data to split messages
  ## with variable length. The specification contains the following fields:
  ##  offset        -- start of length field in bytes from begin of data
  ##  bytes         -- length of length field in bytes
  ##  endianness    -- endianness of the value, either "be" for big endian or
  ##                   "le" for little endian
  ##  header_length -- total length of header to be skipped when passing
  ##                   data on to the parser. If zero (default), the header
  ##                   is passed on to the parser together with the message.
  ## Note: This setting is only used for splitting_strategy = "variable length".
  # splitting_length_field = {offset = 0, bytes = 0, endianness = "be", header_length = 0}

A Note on UDP OS Buffer Sizes

The read_buffer_size config option can be used to adjust the size of the socket buffer, but this number is limited by OS settings. On Linux, read_buffer_size will default to rmem_default and will be capped by rmem_max. On BSD systems, read_buffer_size is capped by maxsockbuf, and there is no OS default setting.

Instructions on how to adjust these OS settings are available below.

Some OSes (most notably, Linux) place very restrictive limits on the performance of UDP protocols. It is highly recommended that you increase these OS limits to at least 8MB before trying to run large amounts of UDP traffic to your instance. 8MB is just a recommendation, and can be adjusted higher.

Linux

Check the current UDP/IP receive buffer limit & default by typing the following commands:

sysctl net.core.rmem_max
sysctl net.core.rmem_default

If the values are less than 8388608 bytes you should add the following lines to the /etc/sysctl.conf file:

net.core.rmem_max=8388608
net.core.rmem_default=8388608

Changes to /etc/sysctl.conf do not take effect until reboot. To update the values immediately, type the following commands as root:

sysctl -w net.core.rmem_max=8388608
sysctl -w net.core.rmem_default=8388608
BSD/Darwin

On BSD/Darwin systems you need to add about a 15% padding to the kernel limit socket buffer. Meaning if you want an 8MB buffer (8388608 bytes) you need to set the kernel limit to 8388608*1.15 = 9646900. This is not documented anywhere but can be seen in the kernel source code.

Check the current UDP/IP buffer limit by typing the following command:

sysctl kern.ipc.maxsockbuf

If the value is less than 9646900 bytes you should add the following lines to the /etc/sysctl.conf file (create it if necessary):

kern.ipc.maxsockbuf=9646900

Changes to /etc/sysctl.conf do not take effect until reboot. To update the values immediately, type the following command as root:

sysctl -w kern.ipc.maxsockbuf=9646900

Metrics

The plugin accepts arbitrary input and parses it according to the data_format setting. There is no predefined metric format.

Example Output

There is no predefined metric format, so output depends on plugin input.

Documentation

Index

Constants

This section is empty.

Variables

This section is empty.

Functions

This section is empty.

Types

type SocketListener

type SocketListener struct {
	ServiceAddress       string           `toml:"service_address"`
	MaxConnections       int              `toml:"max_connections"`
	ReadBufferSize       config.Size      `toml:"read_buffer_size"`
	ReadTimeout          config.Duration  `toml:"read_timeout"`
	KeepAlivePeriod      *config.Duration `toml:"keep_alive_period"`
	SocketMode           string           `toml:"socket_mode"`
	ContentEncoding      string           `toml:"content_encoding"`
	MaxDecompressionSize config.Size      `toml:"max_decompression_size"`
	SplittingStrategy    string           `toml:"splitting_strategy"`
	SplittingDelimiter   string           `toml:"splitting_delimiter"`
	SplittingLength      int              `toml:"splitting_length"`
	SplittingLengthField lengthFieldSpec  `toml:"splitting_length_field"`
	Log                  telegraf.Logger  `toml:"-"`
	tlsint.ServerConfig
	// contains filtered or unexported fields
}

func (*SocketListener) Gather

func (sl *SocketListener) Gather(_ telegraf.Accumulator) error

func (*SocketListener) Init added in v1.25.0

func (sl *SocketListener) Init() error

func (*SocketListener) SampleConfig

func (*SocketListener) SampleConfig() string

func (*SocketListener) SetParser

func (sl *SocketListener) SetParser(parser telegraf.Parser)

func (*SocketListener) Start

func (sl *SocketListener) Start(acc telegraf.Accumulator) error

func (*SocketListener) Stop

func (sl *SocketListener) Stop()

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL