intel_rdt

README

Intel RDT Input Plugin

The intel_rdt plugin collects information provided by monitoring features of the Intel Resource Director Technology (Intel(R) RDT). Intel RDT provides the hardware framework to monitor and control the utilization of shared resources (ex: last level cache, memory bandwidth).

About Intel RDT

Intel’s Resource Director Technology (RDT) framework consists of:

• Cache Monitoring Technology (CMT)
• Memory Bandwidth Monitoring (MBM)
• Cache Allocation Technology (CAT)
• Code and Data Prioritization (CDP)

As multithreaded and multicore platform architectures emerge, the last level cache and memory bandwidth are key resources to manage for running workloads in single-threaded, multithreaded, or complex virtual machine environments. Intel introduces CMT, MBM, CAT and CDP to manage these workloads across shared resources.

Prerequsities - PQoS Tool

To gather Intel RDT metrics, the intel_rdt plugin uses pqos cli tool which is a part of Intel(R) RDT Software Package. Before using this plugin please be sure pqos is properly installed and configured regarding that the plugin run pqos to work with OS Interface mode. This plugin supports pqos version 4.0.0 and above. Note: pqos tool needs root privileges to work properly.

Metrics will be constantly reported from the following pqos commands within the given interval:

If telegraf does not run as the root user

The pqos binary needs to run as root. If telegraf is running as a non-root user, you may enable sudo to allow pqos to run correctly. The pqos command requires root level access to run. There are two options to overcome this if you run telegraf as a non-root user.

It is possible to update the pqos binary with setuid using chmod u+s /path/to/pqos. This approach is simple and requires no modification to the Telegraf configuration, however pqos is not a read-only tool and there are security implications for making such a command setuid root.

Alternately, you may enable sudo to allow pqos to run correctly, as follows:

Add the following to your sudoers file (assumes telegraf runs as a user named telegraf):

telegraf ALL=(ALL) NOPASSWD:/usr/sbin/pqos -r --iface-os --mon-file-type=csv --mon-interval=*

If you wish to use sudo, you must also add use_sudo = true to the Telegraf configuration (see below).

In case of cores monitoring

pqos -r --iface-os --mon-file-type=csv --mon-interval=INTERVAL --mon-core=all:[CORES]\;mbt:[CORES]

where CORES is equal to group of cores provided in config. User can provide many groups.

In case of process monitoring

pqos -r --iface-os --mon-file-type=csv --mon-interval=INTERVAL --mon-pid=all:[PIDS]\;mbt:[PIDS]

where PIDS is group of processes IDs which name are equal to provided process name in a config. User can provide many process names which lead to create many processes groups.

In both cases INTERVAL is equal to sampling_interval from config.

Because PIDs association within system could change in every moment, Intel RDT plugin provides a functionality to check on every interval if desired processes change their PIDs association. If some change is reported, plugin will restart pqos tool with new arguments. If provided by user process name is not equal to any of available processes, will be omitted and plugin will constantly check for process availability.

Useful links

• Pqos installation process: https://github.com/intel/intel-cmt-cat/blob/master/INSTALL
• Enabling OS interface: https://github.com/intel/intel-cmt-cat/wiki, https://github.com/intel/intel-cmt-cat/wiki/resctrl
• More about Intel RDT: https://www.intel.com/content/www/us/en/architecture-and-technology/resource-director-technology.html

Global configuration options

In addition to the plugin-specific configuration settings, plugins support additional global and plugin configuration settings. These settings are used to modify metrics, tags, and field or create aliases and configure ordering, etc. See the CONFIGURATION.md for more details.

Configuration

# Read Intel RDT metrics
[[inputs.intel_rdt]]
  ## Optionally set sampling interval to Nx100ms. 
  ## This value is propagated to pqos tool. Interval format is defined by pqos itself.
  ## If not provided or provided 0, will be set to 10 = 10x100ms = 1s.
  # sampling_interval = "10"
 
  ## Optionally specify the path to pqos executable. 
  ## If not provided, auto discovery will be performed.
  # pqos_path = "/usr/local/bin/pqos"

  ## Optionally specify if IPC and LLC_Misses metrics shouldn't be propagated.
  ## If not provided, default value is false.
  # shortened_metrics = false

  ## Specify the list of groups of CPU core(s) to be provided as pqos input. 
  ## Mandatory if processes aren't set and forbidden if processes are specified.
  ## e.g. ["0-3", "4,5,6"] or ["1-3,4"]
  # cores = ["0-3"]

  ## Specify the list of processes for which Metrics will be collected.
  ## Mandatory if cores aren't set and forbidden if cores are specified.
  ## e.g. ["qemu", "pmd"]
  # processes = ["process"]

  ## Specify if the pqos process should be called with sudo.
  ## Mandatory if the telegraf process does not run as root.
  # use_sudo = false

Exposed metrics

Name	Full name	Description
MBL	Memory Bandwidth on Local NUMA Node	Memory bandwidth utilization by the relevant CPU core/process on the local NUMA memory channel
MBR	Memory Bandwidth on Remote NUMA Node	Memory bandwidth utilization by the relevant CPU core/process on the remote NUMA memory channel
MBT	Total Memory Bandwidth	Total memory bandwidth utilized by a CPU core/process on local and remote NUMA memory channels
LLC	L3 Cache Occupancy	Total Last Level Cache occupancy by a CPU core/process
LLC_Misses*	L3 Cache Misses	Total Last Level Cache misses by a CPU core/process
IPC*	Instructions Per Cycle	Total instructions per cycle executed by a CPU core/process

*optional

Troubleshooting

Pointing to non-existing cores will lead to throwing an error by pqos and the plugin will not work properly. Be sure to check provided core number exists within desired system.

Be aware, reading Intel RDT metrics by pqos cannot be done simultaneously on the same resource. Do not use any other pqos instance that is monitoring the same cores or PIDs within the working system. It is not possible to monitor same cores or PIDs on different groups.

PIDs associated for the given process could be manually checked by pidof command. E.g:

pidof PROCESS

where PROCESS is process name.

Example Output

> rdt_metric,cores=12\,19,host=r2-compute-20,name=IPC,process=top value=0 1598962030000000000
> rdt_metric,cores=12\,19,host=r2-compute-20,name=LLC_Misses,process=top value=0 1598962030000000000
> rdt_metric,cores=12\,19,host=r2-compute-20,name=LLC,process=top value=0 1598962030000000000
> rdt_metric,cores=12\,19,host=r2-compute-20,name=MBL,process=top value=0 1598962030000000000
> rdt_metric,cores=12\,19,host=r2-compute-20,name=MBR,process=top value=0 1598962030000000000
> rdt_metric,cores=12\,19,host=r2-compute-20,name=MBT,process=top value=0 1598962030000000000

Documentation

Index

• type IntelRDT
  • func (r *IntelRDT) Gather(_ telegraf.Accumulator) error
  • func (r *IntelRDT) Initialize() error
  • func (*IntelRDT) SampleConfig() string
  • func (r *IntelRDT) Start(acc telegraf.Accumulator) error
  • func (r *IntelRDT) Stop()
• type Process
• type ProcessManager
• type ProcessesHandler
  • func NewProcessor() ProcessesHandler
• type Publisher
  • func NewPublisher(acc telegraf.Accumulator, log telegraf.Logger, shortenedMetrics bool) Publisher

Types

type IntelRDT

type IntelRDT struct {
	PqosPath         string   `toml:"pqos_path"`
	Cores            []string `toml:"cores"`
	Processes        []string `toml:"processes"`
	SamplingInterval int32    `toml:"sampling_interval"`
	ShortenedMetrics bool     `toml:"shortened_metrics"`
	UseSudo          bool     `toml:"use_sudo"`

	Log       telegraf.Logger  `toml:"-"`
	Publisher Publisher        `toml:"-"`
	Processor ProcessesHandler `toml:"-"`
	// contains filtered or unexported fields
}

func (*IntelRDT) Gather

func (r *IntelRDT) Gather(_ telegraf.Accumulator) error

All gathering is done in the Start function

func (*IntelRDT) Initialize

func (r *IntelRDT) Initialize() error

func (*IntelRDT) SampleConfig

func (*IntelRDT) SampleConfig() string

func (*IntelRDT) Start

func (r *IntelRDT) Start(acc telegraf.Accumulator) error

func (*IntelRDT) Stop

func (r *IntelRDT) Stop()

type Process

type Process struct {
	Name string
	PID  int
}

type ProcessManager

type ProcessManager struct{}

type ProcessesHandler

type ProcessesHandler interface {
	// contains filtered or unexported methods
}

func NewProcessor

func NewProcessor() ProcessesHandler

type Publisher

type Publisher struct {
	Log telegraf.Logger

	BufferChanProcess chan processMeasurement
	BufferChanCores   chan string
	// contains filtered or unexported fields
}

Publisher for publish new RDT metrics to telegraf accumulator

func NewPublisher

func NewPublisher(acc telegraf.Accumulator, log telegraf.Logger, shortenedMetrics bool) Publisher