syslog

README

Syslog Input Plugin

The syslog plugin listens for syslog messages transmitted over a Unix Domain socket, UDP, TCP, or TLS; with or without the octet counting framing.

Syslog messages should be formatted according to RFC 5424.

Configuration

[[inputs.syslog]]
  ## Protocol, address and port to host the syslog receiver.
  ## If no host is specified, then localhost is used.
  ## If no port is specified, 6514 is used (RFC5425#section-4.1).
  ##   ex: server = "tcp://localhost:6514"
  ##       server = "udp://:6514"
  ##       server = "unix:///var/run/telegraf-syslog.sock"
  server = "tcp://:6514"

  ## TLS Config
  # tls_allowed_cacerts = ["/etc/telegraf/ca.pem"]
  # tls_cert = "/etc/telegraf/cert.pem"
  # tls_key = "/etc/telegraf/key.pem"

  ## Period between keep alive probes.
  ## 0 disables keep alive probes.
  ## Defaults to the OS configuration.
  ## Only applies to stream sockets (e.g. TCP).
  # keep_alive_period = "5m"

  ## Maximum number of concurrent connections (default = 0).
  ## 0 means unlimited.
  ## Only applies to stream sockets (e.g. TCP).
  # max_connections = 1024

  ## Read timeout is the maximum time allowed for reading a single message (default = 5s).
  ## 0 means unlimited.
  # read_timeout = "5s"

  ## The framing technique with which it is expected that messages are transported (default = "octet-counting").
  ## Whether the messages come using the octect-counting (RFC5425#section-4.3.1, RFC6587#section-3.4.1),
  ## or the non-transparent framing technique (RFC6587#section-3.4.2).
  ## Must be one of "octect-counting", "non-transparent".
  # framing = "octet-counting"

  ## The trailer to be expected in case of non-transparent framing (default = "LF").
  ## Must be one of "LF", or "NUL".
  # trailer = "LF"

  ## Whether to parse in best effort mode or not (default = false).
  ## By default best effort parsing is off.
  # best_effort = false

  ## The RFC standard to use for message parsing
  ## By default RFC5424 is used. RFC3164 only supports UDP transport (no streaming support)
  ## Must be one of "RFC5424", or "RFC3164".
  # syslog_standard = "RFC5424"

  ## Character to prepend to SD-PARAMs (default = "_").
  ## A syslog message can contain multiple parameters and multiple identifiers within structured data section.
  ## Eg., [id1 name1="val1" name2="val2"][id2 name1="val1" nameA="valA"]
  ## For each combination a field is created.
  ## Its name is created concatenating identifier, sdparam_separator, and parameter name.
  # sdparam_separator = "_"

Message transport

The framing option only applies to streams. It governs the way we expect to receive messages within the stream. Namely, with the "octet counting" technique (default) or with the "non-transparent" framing.

The trailer option only applies when framing option is "non-transparent". It must have one of the following values: "LF" (default), or "NUL".

Best effort

The best_effort option instructs the parser to extract partial but valid info from syslog messages. If unset only full messages will be collected.

Rsyslog Integration

Rsyslog can be configured to forward logging messages to Telegraf by configuring remote logging.

Most system are setup with a configuration split between /etc/rsyslog.conf and the files in the /etc/rsyslog.d/ directory, it is recommended to add the new configuration into the config directory to simplify updates to the main config file.

Add the following lines to /etc/rsyslog.d/50-telegraf.conf making adjustments to the target address as needed:

$ActionQueueType LinkedList # use asynchronous processing
$ActionQueueFileName srvrfwd # set file name, also enables disk mode
$ActionResumeRetryCount -1 # infinite retries on insert failure
$ActionQueueSaveOnShutdown on # save in-memory data if rsyslog shuts down

# forward over tcp with octet framing according to RFC 5425
*.* @@(o)127.0.0.1:6514;RSYSLOG_SyslogProtocol23Format

# uncomment to use udp according to RFC 5424
#*.* @127.0.0.1:6514;RSYSLOG_SyslogProtocol23Format

You can alternately use advanced format (aka RainerScript):

# forward over tcp with octet framing according to RFC 5425
action(type="omfwd" Protocol="tcp" TCP_Framing="octet-counted" Target="127.0.0.1" Port="6514" Template="RSYSLOG_SyslogProtocol23Format")

# uncomment to use udp according to RFC 5424
#action(type="omfwd" Protocol="udp" Target="127.0.0.1" Port="6514" Template="RSYSLOG_SyslogProtocol23Format")

To complete TLS setup please refer to rsyslog docs.

Metrics

• syslog
  • tags
    • severity (string)
    • facility (string)
    • hostname (string)
    • appname (string)
  • fields
    • version (integer)
    • severity_code (integer)
    • facility_code (integer)
    • timestamp (integer): the time recorded in the syslog message
    • procid (string)
    • msgid (string)
    • sdid (bool)
    • Structured Data (string)
  • timestamp: the time the messages was received

Structured Data

Structured data produces field keys by combining the SD_ID with the PARAM_NAME combined using the sdparam_separator as in the following example:

170 <165>1 2018-10-01:14:15.000Z mymachine.example.com evntslog - ID47 [exampleSDID@32473 iut="3" eventSource="Application" eventID="1011"] An application event log entry...

syslog,appname=evntslog,facility=local4,hostname=mymachine.example.com,severity=notice exampleSDID@32473_eventID="1011",exampleSDID@32473_eventSource="Application",exampleSDID@32473_iut="3",facility_code=20i,message="An application event log entry...",msgid="ID47",severity_code=5i,timestamp=1065910455003000000i,version=1i 1538421339749472344

Troubleshooting

You can send debugging messages directly to the input plugin using netcat:

# TCP with octet framing
echo "57 <13>1 2018-10-01T12:00:00.0Z example.org root - - - test" | nc 127.0.0.1 6514

# UDP
echo "<13>1 2018-10-01T12:00:00.0Z example.org root - - - test" | nc -u 127.0.0.1 6514

RFC3164

RFC3164 encoded messages are supported for UDP only, but not all vendors output valid RFC3164 messages by default

• E.g. Cisco IOS

If you see the following error, it is due to a message encoded in this format:

E! Error in plugin [inputs.syslog]: expecting a version value in the range 1-999 [col 5]

Users can use rsyslog to translate RFC3164 syslog messages into RFC5424 format. Add the following lines to the rsyslog configuration file (e.g. /etc/rsyslog.d/50-telegraf.conf):

# This makes rsyslog listen on 127.0.0.1:514 to receive RFC3164 udp
# messages which can them be forwared to telegraf as RFC5424
$ModLoad imudp #loads the udp module
$UDPServerAddress 127.0.0.1
$UDPServerRun 514

Make adjustments to the target address as needed and sent your RFC3164 messages to port 514.

Documentation

Index

• type Syslog
  • func (s *Syslog) Description() string
  • func (s *Syslog) Gather(_ telegraf.Accumulator) error
  • func (s *Syslog) SampleConfig() string
  • func (s *Syslog) Start(acc telegraf.Accumulator) error
  • func (s *Syslog) Stop()

Types

type Syslog

type Syslog struct {
	tlsConfig.ServerConfig
	Address         string `toml:"server"`
	KeepAlivePeriod *config.Duration
	MaxConnections  int
	ReadTimeout     *config.Duration
	Framing         framing.Framing
	SyslogStandard  syslogRFC
	Trailer         nontransparent.TrailerType
	BestEffort      bool
	Separator       string `toml:"sdparam_separator"`

	io.Closer
	// contains filtered or unexported fields
}

Syslog is a syslog plugin

func (*Syslog) Description

func (s *Syslog) Description() string

Description returns the plugin description

func (*Syslog) Gather

func (s *Syslog) Gather(_ telegraf.Accumulator) error

Gather ...

func (*Syslog) SampleConfig

func (s *Syslog) SampleConfig() string

SampleConfig returns sample configuration message

func (*Syslog) Start

func (s *Syslog) Start(acc telegraf.Accumulator) error

Start starts the service.

func (*Syslog) Stop

func (s *Syslog) Stop()

Stop cleans up all resources