gnmi

README

gNMI (gRPC Network Management Interface) Input Plugin

This plugin consumes telemetry data based on the gNMI Subscribe method. TLS is supported for authentication and encryption. This input plugin is vendor-agnostic and is supported on any platform that supports the gNMI spec.

For Cisco devices: It has been optimized to support gNMI telemetry as produced by Cisco IOS XR (64-bit) version 6.5.1, Cisco NX-OS 9.3 and Cisco IOS XE 16.12 and later.

Configuration

[[inputs.gnmi]]
  ## Address and port of the gNMI GRPC server
  addresses = ["10.49.234.114:57777"]

  ## define credentials
  username = "cisco"
  password = "cisco"

  ## gNMI encoding requested (one of: "proto", "json", "json_ietf", "bytes")
  # encoding = "proto"

  ## redial in case of failures after
  redial = "10s"

  ## enable client-side TLS and define CA to authenticate the device
  # enable_tls = true
  # tls_ca = "/etc/telegraf/ca.pem"
  # insecure_skip_verify = true

  ## define client-side TLS certificate & key to authenticate to the device
  # tls_cert = "/etc/telegraf/cert.pem"
  # tls_key = "/etc/telegraf/key.pem"

  ## gNMI subscription prefix (optional, can usually be left empty)
  ## See: https://github.com/openconfig/reference/blob/master/rpc/gnmi/gnmi-specification.md#222-paths
  # origin = ""
  # prefix = ""
  # target = ""

  ## Define additional aliases to map telemetry encoding paths to simple measurement names
  # [inputs.gnmi.aliases]
  #   ifcounters = "openconfig:/interfaces/interface/state/counters"

  [[inputs.gnmi.subscription]]
    ## Name of the measurement that will be emitted
    name = "ifcounters"

    ## Origin and path of the subscription
    ## See: https://github.com/openconfig/reference/blob/master/rpc/gnmi/gnmi-specification.md#222-paths
    ##
    ## origin usually refers to a (YANG) data model implemented by the device
    ## and path to a specific substructure inside it that should be subscribed to (similar to an XPath)
    ## YANG models can be found e.g. here: https://github.com/YangModels/yang/tree/master/vendor/cisco/xr
    origin = "openconfig-interfaces"
    path = "/interfaces/interface/state/counters"

    # Subscription mode (one of: "target_defined", "sample", "on_change") and interval
    subscription_mode = "sample"
    sample_interval = "10s"

    ## Suppress redundant transmissions when measured values are unchanged
    # suppress_redundant = false

    ## If suppression is enabled, send updates at least every X seconds anyway
    # heartbeat_interval = "60s"

Example Output

ifcounters,path=openconfig-interfaces:/interfaces/interface/state/counters,host=linux,name=MgmtEth0/RP0/CPU0/0,source=10.49.234.115 in-multicast-pkts=0i,out-multicast-pkts=0i,out-errors=0i,out-discards=0i,in-broadcast-pkts=0i,out-broadcast-pkts=0i,in-discards=0i,in-unknown-protos=0i,in-errors=0i,out-unicast-pkts=0i,in-octets=0i,out-octets=0i,last-clear="2019-05-22T16:53:21Z",in-unicast-pkts=0i 1559145777425000000
ifcounters,path=openconfig-interfaces:/interfaces/interface/state/counters,host=linux,name=GigabitEthernet0/0/0/0,source=10.49.234.115 out-multicast-pkts=0i,out-broadcast-pkts=0i,in-errors=0i,out-errors=0i,in-discards=0i,out-octets=0i,in-unknown-protos=0i,in-unicast-pkts=0i,in-octets=0i,in-multicast-pkts=0i,in-broadcast-pkts=0i,last-clear="2019-05-22T16:54:50Z",out-unicast-pkts=0i,out-discards=0i 1559145777425000000

Documentation

Index

• func New() telegraf.Input
• type GNMI
  • func (c *GNMI) Description() string
  • func (c *GNMI) Gather(_ telegraf.Accumulator) error
  • func (c *GNMI) SampleConfig() string
  • func (c *GNMI) Start(acc telegraf.Accumulator) error
  • func (c *GNMI) Stop()
• type Subscription

Functions

func New

func New() telegraf.Input

Types

type GNMI

type GNMI struct {
	Addresses     []string          `toml:"addresses"`
	Subscriptions []Subscription    `toml:"subscription"`
	Aliases       map[string]string `toml:"aliases"`

	// Optional subscription configuration
	Encoding    string
	Origin      string
	Prefix      string
	Target      string
	UpdatesOnly bool `toml:"updates_only"`

	// gNMI target credentials
	Username string
	Password string

	// Redial
	Redial config.Duration

	// GRPC TLS settings
	EnableTLS bool `toml:"enable_tls"`
	internaltls.ClientConfig

	Log telegraf.Logger
	// contains filtered or unexported fields
}

gNMI plugin instance

func (*GNMI) Description

func (c *GNMI) Description() string

Description of plugin

func (*GNMI) Gather

func (c *GNMI) Gather(_ telegraf.Accumulator) error

Gather plugin measurements (unused)

func (*GNMI) SampleConfig

func (c *GNMI) SampleConfig() string

SampleConfig of plugin

func (*GNMI) Start

func (c *GNMI) Start(acc telegraf.Accumulator) error

Start the http listener service

func (*GNMI) Stop

func (c *GNMI) Stop()

Stop listener and cleanup

type Subscription

type Subscription struct {
	Name   string
	Origin string
	Path   string

	// Subscription mode and interval
	SubscriptionMode string          `toml:"subscription_mode"`
	SampleInterval   config.Duration `toml:"sample_interval"`

	// Duplicate suppression
	SuppressRedundant bool            `toml:"suppress_redundant"`
	HeartbeatInterval config.Duration `toml:"heartbeat_interval"`
}

Subscription for a gNMI client