statsd

README

StatsD Input Plugin

The StatsD input plugin gathers metrics from a Statsd server.

Service Input

This plugin is a service input. Normal plugins gather metrics determined by the interval setting. Service plugins start a service to listens and waits for metrics or events to occur. Service plugins have two key differences from normal plugins:

1. The global or plugin specific interval setting may not apply
2. The CLI options of --test, --test-wait, and --once may not produce output for this plugin

Global configuration options

In addition to the plugin-specific configuration settings, plugins support additional global and plugin configuration settings. These settings are used to modify metrics, tags, and field or create aliases and configure ordering, etc. See the CONFIGURATION.md for more details.

Configuration

# Statsd Server
[[inputs.statsd]]
  ## Protocol, must be "tcp", "udp4", "udp6" or "udp" (default=udp)
  protocol = "udp"

  ## MaxTCPConnection - applicable when protocol is set to tcp (default=250)
  max_tcp_connections = 250

  ## Enable TCP keep alive probes (default=false)
  tcp_keep_alive = false

  ## Specifies the keep-alive period for an active network connection.
  ## Only applies to TCP sockets and will be ignored if tcp_keep_alive is false.
  ## Defaults to the OS configuration.
  # tcp_keep_alive_period = "2h"

  ## Address and port to host UDP listener on
  service_address = ":8125"

  ## The following configuration options control when telegraf clears it's cache
  ## of previous values. If set to false, then telegraf will only clear it's
  ## cache when the daemon is restarted.
  ## Reset gauges every interval (default=true)
  delete_gauges = true
  ## Reset counters every interval (default=true)
  delete_counters = true
  ## Reset sets every interval (default=true)
  delete_sets = true
  ## Reset timings & histograms every interval (default=true)
  delete_timings = true

  ## Enable aggregation temporality adds temporality=delta or temporality=commulative tag, and
  ## start_time field, which adds the start time of the metric accumulation.
  ## You should use this when using OpenTelemetry output.
  # enable_aggregation_temporality = false

  ## Percentiles to calculate for timing & histogram stats.
  percentiles = [50.0, 90.0, 99.0, 99.9, 99.95, 100.0]

  ## separator to use between elements of a statsd metric
  metric_separator = "_"

  ## Parses extensions to statsd in the datadog statsd format
  ## currently supports metrics and datadog tags.
  ## http://docs.datadoghq.com/guides/dogstatsd/
  datadog_extensions = false

  ## Parses distributions metric as specified in the datadog statsd format
  ## https://docs.datadoghq.com/developers/metrics/types/?tab=distribution#definition
  datadog_distributions = false

  ## Keep or drop the container id as tag. Included as optional field
  ## in DogStatsD protocol v1.2 if source is running in Kubernetes
  ## https://docs.datadoghq.com/developers/dogstatsd/datagram_shell/?tab=metrics#dogstatsd-protocol-v12
  datadog_keep_container_tag = false

  ## Statsd data translation templates, more info can be read here:
  ## https://github.com/influxdata/telegraf/blob/master/docs/TEMPLATE_PATTERN.md
  # templates = [
  #     "cpu.* measurement*"
  # ]

  ## Number of UDP messages allowed to queue up, once filled,
  ## the statsd server will start dropping packets
  allowed_pending_messages = 10000

  ## Number of worker threads used to parse the incoming messages.
  # number_workers_threads = 5

  ## Number of timing/histogram values to track per-measurement in the
  ## calculation of percentiles. Raising this limit increases the accuracy
  ## of percentiles but also increases the memory usage and cpu time.
  percentile_limit = 1000

  ## Maximum socket buffer size in bytes, once the buffer fills up, metrics
  ## will start dropping.  Defaults to the OS default.
  # read_buffer_size = 65535

  ## Max duration (TTL) for each metric to stay cached/reported without being updated.
  # max_ttl = "10h"

  ## Sanitize name method
  ## By default, telegraf will pass names directly as they are received.
  ## However, upstream statsd now does sanitization of names which can be
  ## enabled by using the "upstream" method option. This option will a) replace
  ## white space with '_', replace '/' with '-', and remove characters not
  ## matching 'a-zA-Z_\-0-9\.;='.
  #sanitize_name_method = ""

  ## Replace dots (.) with underscore (_) and dashes (-) with
  ## double underscore (__) in metric names.
  # convert_names = false

  ## Convert all numeric counters to float
  ## Enabling this would ensure that both counters and guages are both emitted
  ## as floats.
  # float_counters = false

  ## Emit timings `metric_<name>_count` field as float, the same as all other
  ## histogram fields
  # float_timings = false

  ## Emit sets as float
  # float_sets = false

Description

The statsd plugin is a special type of plugin which runs a backgrounded statsd listener service while telegraf is running.

The format of the statsd messages was based on the format described in the original etsy statsd implementation. In short, the telegraf statsd listener will accept:

• Gauges
  • users.current.den001.myapp:32|g <- standard
  • users.current.den001.myapp:+10|g <- additive
  • users.current.den001.myapp:-10|g
• Counters
  • deploys.test.myservice:1|c <- increments by 1
  • deploys.test.myservice:101|c <- increments by 101
  • deploys.test.myservice:1|c|@0.1 <- with sample rate, increments by 10
• Sets
  • users.unique:101|s
  • users.unique:101|s
  • users.unique:102|s <- would result in a count of 2 for users.unique
• Timings & Histograms
  • load.time:320|ms
  • load.time.nanoseconds:1|h
  • load.time:200|ms|@0.1 <- sampled 1/10 of the time
• Distributions
  • load.time:320|d
  • load.time.nanoseconds:1|d
  • load.time:200|d|@0.1 <- sampled 1/10 of the time

It is possible to omit repetitive names and merge individual stats into a single line by separating them with additional colons:

• users.current.den001.myapp:32|g:+10|g:-10|g
• deploys.test.myservice:1|c:101|c:1|c|@0.1
• users.unique:101|s:101|s:102|s
• load.time:320|ms:200|ms|@0.1

This also allows for mixed types in a single line:

• foo:1|c:200|ms

The string foo:1|c:200|ms is internally split into two individual metrics foo:1|c and foo:200|ms which are added to the aggregator separately.

Influx Statsd

In order to take advantage of InfluxDB's tagging system, we have made a couple additions to the standard statsd protocol. First, you can specify tags in a manner similar to the line-protocol, like this:

users.current,service=payroll,region=us-west:32|g

Metrics

Meta:

• tags: metric_type=<gauge|set|counter|timing|histogram>

Outputted measurements will depend entirely on the measurements that the user sends, but here is a brief rundown of what you can expect to find from each metric type:

• Gauges
  • Gauges are a constant data type. They are not subject to averaging, and they don’t change unless you change them. That is, once you set a gauge value, it will be a flat line on the graph until you change it again.
• Counters
  • Counters are the most basic type. They are treated as a count of a type of event. They will continually increase unless you set delete_counters=true.
• Sets
  • Sets count the number of unique values passed to a key. For example, you could count the number of users accessing your system using users:<user_id>|s. No matter how many times the same user_id is sent, the count will only increase by 1.
• Timings & Histograms
  • Timers are meant to track how long something took. They are an invaluable tool for tracking application performance.
  • The following aggregate measurements are made for timers:
    • statsd_<name>_lower: The lower bound is the lowest value statsd saw for that stat during that interval.
    • statsd_<name>_upper: The upper bound is the highest value statsd saw for that stat during that interval.
    • statsd_<name>_mean: The mean is the average of all values statsd saw for that stat during that interval.
    • statsd_<name>_median: The median is the middle of all values statsd saw for that stat during that interval.
    • statsd_<name>_stddev: The stddev is the sample standard deviation of all values statsd saw for that stat during that interval.
    • statsd_<name>_sum: The sum is the sample sum of all values statsd saw for that stat during that interval.
    • statsd_<name>_count: The count is the number of timings statsd saw for that stat during that interval. It is not averaged.
    • statsd_<name>_percentile_<P> The Pth percentile is a value x such that P% of all the values statsd saw for that stat during that time period are below x. The most common value that people use for P is the 90, this is a great number to try to optimize.
• Distributions
  • The Distribution metric represents the global statistical distribution of a set of values calculated across your entire distributed infrastructure in one time interval. A Distribution can be used to instrument logical objects, like services, independently from the underlying hosts.
  • Unlike the Histogram metric type, which aggregates on the Agent during a given time interval, a Distribution metric sends all the raw data during a time interval.

Plugin arguments

• protocol string: Protocol used in listener - tcp or udp options
• max_tcp_connections []int: Maximum number of concurrent TCP connections to allow. Used when protocol is set to tcp.
• tcp_keep_alive boolean: Enable TCP keep alive probes
• tcp_keep_alive_period duration: Specifies the keep-alive period for an active network connection
• service_address string: Address to listen for statsd UDP packets on
• delete_gauges boolean: Delete gauges on every collection interval
• delete_counters boolean: Delete counters on every collection interval
• delete_sets boolean: Delete set counters on every collection interval
• delete_timings boolean: Delete timings on every collection interval
• percentiles []int: Percentiles to calculate for timing & histogram stats
• allowed_pending_messages integer: Number of messages allowed to queue up waiting to be processed. When this fills, messages will be dropped and logged.
• percentile_limit integer: Number of timing/histogram values to track per-measurement in the calculation of percentiles. Raising this limit increases the accuracy of percentiles but also increases the memory usage and cpu time.
• templates []string: Templates for transforming statsd buckets into influx measurements and tags.
• parse_data_dog_tags boolean: Enable parsing of tags in DataDog's dogstatsd format (http://docs.datadoghq.com/guides/dogstatsd/)
• datadog_extensions boolean: Enable parsing of DataDog's extensions to dogstatsd format (http://docs.datadoghq.com/guides/dogstatsd/)
• datadog_distributions boolean: Enable parsing of the Distribution metric in DataDog's dogstatsd format (https://docs.datadoghq.com/developers/metrics/types/?tab=distribution#definition)
• datadog_keep_container_tag boolean: Keep or drop the container id as tag. Included as optional field in DogStatsD protocol v1.2 if source is running in Kubernetes.
• max_ttl config.Duration: Max duration (TTL) for each metric to stay cached/reported without being updated.

Statsd bucket -> InfluxDB line-protocol Templates

The plugin supports specifying templates for transforming statsd buckets into InfluxDB measurement names and tags. The templates have a measurement keyword, which can be used to specify parts of the bucket that are to be used in the measurement name. Other words in the template are used as tag names. For example, the following template:

templates = [
    "measurement.measurement.region"
]

would result in the following transformation:

cpu.load.us-west:100|g
=> cpu_load,region=us-west 100

Users can also filter the template to use based on the name of the bucket, using glob matching, like so:

templates = [
    "cpu.* measurement.measurement.region",
    "mem.* measurement.measurement.host"
]

which would result in the following transformation:

cpu.load.us-west:100|g
=> cpu_load,region=us-west 100

mem.cached.localhost:256|g
=> mem_cached,host=localhost 256

Consult the Template Patterns documentation for additional details.

Example Output

Documentation

Index

• Constants
• type Number
  • func (n *Number) UnmarshalTOML(b []byte) error
• type RunningStats
  • func (rs *RunningStats) AddValue(v float64)
  • func (rs *RunningStats) Count() int64
  • func (rs *RunningStats) Lower() float64
  • func (rs *RunningStats) Mean() float64
  • func (rs *RunningStats) Median() float64
  • func (rs *RunningStats) Percentile(n float64) float64
  • func (rs *RunningStats) Stddev() float64
  • func (rs *RunningStats) Sum() float64
  • func (rs *RunningStats) Upper() float64
  • func (rs *RunningStats) Variance() float64
• type Statsd
  • func (s *Statsd) Gather(acc telegraf.Accumulator) error
  • func (*Statsd) SampleConfig() string
  • func (s *Statsd) Start(ac telegraf.Accumulator) error
  • func (s *Statsd) Stop()

Constants

const (
	// UDPMaxPacketSize is the UDP packet limit, see
	// https://en.wikipedia.org/wiki/User_Datagram_Protocol#Packet_structure
	UDPMaxPacketSize int = 64 * 1024
)

Types

type Number

type Number float64

Number will get parsed as an int or float depending on what is passed

func (*Number) UnmarshalTOML

func (n *Number) UnmarshalTOML(b []byte) error

type RunningStats

type RunningStats struct {
	PercLimit int

	// cache if we have sorted the list so that we never re-sort a sorted list,
	// which can have very bad performance.
	SortedPerc bool

	MedLimit       int
	MedInsertIndex int
	// contains filtered or unexported fields
}

RunningStats calculates a running mean, variance, standard deviation, lower bound, upper bound, count, and can calculate estimated percentiles. It is based on the incremental algorithm described here:

https://en.wikipedia.org/wiki/Algorithms_for_calculating_variance

func (*RunningStats) AddValue

func (rs *RunningStats) AddValue(v float64)

func (*RunningStats) Count

func (rs *RunningStats) Count() int64

func (*RunningStats) Lower

func (rs *RunningStats) Lower() float64

func (*RunningStats) Mean

func (rs *RunningStats) Mean() float64

func (*RunningStats) Median

func (rs *RunningStats) Median() float64

func (*RunningStats) Percentile

func (rs *RunningStats) Percentile(n float64) float64

func (*RunningStats) Stddev

func (rs *RunningStats) Stddev() float64

func (*RunningStats) Sum

func (rs *RunningStats) Sum() float64

func (*RunningStats) Upper

func (rs *RunningStats) Upper() float64

func (*RunningStats) Variance

func (rs *RunningStats) Variance() float64

type Statsd

type Statsd struct {
	// Protocol used on listener - udp or tcp
	Protocol string `toml:"protocol"`

	// Address & Port to serve from
	ServiceAddress string `toml:"service_address"`

	// Number of messages allowed to queue up in between calls to Gather. If this
	// fills up, packets will get dropped until the next Gather interval is ran.
	AllowedPendingMessages int `toml:"allowed_pending_messages"`
	NumberWorkerThreads    int `toml:"number_workers_threads"`

	// Percentiles specifies the percentiles that will be calculated for timing
	// and histogram stats.
	Percentiles     []Number `toml:"percentiles"`
	PercentileLimit int      `toml:"percentile_limit"`
	DeleteGauges    bool     `toml:"delete_gauges"`
	DeleteCounters  bool     `toml:"delete_counters"`
	DeleteSets      bool     `toml:"delete_sets"`
	DeleteTimings   bool     `toml:"delete_timings"`
	ConvertNames    bool     `toml:"convert_names"`
	FloatCounters   bool     `toml:"float_counters"`
	FloatTimings    bool     `toml:"float_timings"`
	FloatSets       bool     `toml:"float_sets"`

	EnableAggregationTemporality bool `toml:"enable_aggregation_temporality"`

	// MetricSeparator is the separator between parts of the metric name.
	MetricSeparator string `toml:"metric_separator"`
	// This flag enables parsing of tags in the dogstatsd extension to the
	// statsd protocol (http://docs.datadoghq.com/guides/dogstatsd/)
	ParseDataDogTags bool `toml:"parse_data_dog_tags" deprecated:"1.10.0;1.35.0;use 'datadog_extensions' instead"`

	// Parses extensions to statsd in the datadog statsd format
	// currently supports metrics and datadog tags.
	// http://docs.datadoghq.com/guides/dogstatsd/
	DataDogExtensions bool `toml:"datadog_extensions"`

	// Parses distribution metrics in the datadog statsd format.
	// Requires the DataDogExtension flag to be enabled.
	// https://docs.datadoghq.com/developers/metrics/types/?tab=distribution#definition
	DataDogDistributions bool `toml:"datadog_distributions"`

	// Either to keep or drop the container id as tag.
	// Requires the DataDogExtension flag to be enabled.
	// https://docs.datadoghq.com/developers/dogstatsd/datagram_shell/?tab=metrics#dogstatsd-protocol-v12
	DataDogKeepContainerTag bool `toml:"datadog_keep_container_tag"`

	// UDPPacketSize is deprecated, it's only here for legacy support
	// we now always create 1 max size buffer and then copy only what we need
	// into the in channel
	// see https://github.com/influxdata/telegraf/pull/992
	UDPPacketSize int `toml:"udp_packet_size" deprecated:"0.12.1;1.35.0;option is ignored"`

	ReadBufferSize      int              `toml:"read_buffer_size"`
	SanitizeNamesMethod string           `toml:"sanitize_name_method"`
	Templates           []string         `toml:"templates"` // bucket -> influx templates
	MaxTCPConnections   int              `toml:"max_tcp_connections"`
	TCPKeepAlive        bool             `toml:"tcp_keep_alive"`
	TCPKeepAlivePeriod  *config.Duration `toml:"tcp_keep_alive_period"`

	// Max duration for each metric to stay cached without being updated.
	MaxTTL config.Duration `toml:"max_ttl"`
	Log    telegraf.Logger `toml:"-"`

	sync.Mutex

	// Protocol listeners
	UDPlistener *net.UDPConn
	TCPlistener *net.TCPListener

	// Internal statistics counters
	MaxConnections     selfstat.Stat
	CurrentConnections selfstat.Stat
	TotalConnections   selfstat.Stat
	TCPPacketsRecv     selfstat.Stat
	TCPBytesRecv       selfstat.Stat
	UDPPacketsRecv     selfstat.Stat
	UDPPacketsDrop     selfstat.Stat
	UDPBytesRecv       selfstat.Stat
	ParseTimeNS        selfstat.Stat
	PendingMessages    selfstat.Stat
	MaxPendingMessages selfstat.Stat
	// contains filtered or unexported fields
}

Statsd allows the importing of statsd and dogstatsd data.

func (*Statsd) Gather

func (s *Statsd) Gather(acc telegraf.Accumulator) error

func (*Statsd) SampleConfig

func (*Statsd) SampleConfig() string

func (*Statsd) Start

func (s *Statsd) Start(ac telegraf.Accumulator) error

func (*Statsd) Stop

func (s *Statsd) Stop()