base

package
v0.0.0-...-15cf0d5 Latest Latest
Warning

This package is not in the latest version of its module.

 Go to latest Published: Jul 15, 2024 License: BSD-3-Clause Imports: 19 Imported by: 0

Documentation

Index

Constants

View Source 
const (
	// SeqNumZero is the zero sequence number, set by compactions if they can
	// guarantee there are no keys underneath an internal key.
	SeqNumZero = uint64(0)
	// SeqNumStart is the first sequence number assigned to a key. Sequence
	// numbers 1-9 are reserved for potential future use.
	SeqNumStart = uint64(10)
)
View Source 
const (
	DefaultBlockRestartInterval = 16
	DefaultBlockSize            = 4096
	DefaultBlockSizeThreshold   = 90
)

SSTable block defaults.

View Source 
const InternalTrailerLen = 8

InternalTrailerLen is the number of bytes used to encode InternalKey.Trailer.

View Source 
const MaxShortAttribute = 7

MaxShortAttribute is the maximum value of the short attribute (3 bits).

View Source 
const SeekGEFlagsNone = SeekGEFlags(0)

SeekGEFlagsNone is the default value of SeekGEFlags, with all flags disabled.

View Source 
const SeekLTFlagsNone = SeekLTFlags(0)

SeekLTFlagsNone is the default value of SeekLTFlags, with all flags disabled.

Variables

View Source 
var DefaultComparer = &Comparer{
	Compare: bytes.Compare,
	Equal:   bytes.Equal,

	AbbreviatedKey: func(key []byte) uint64 {
		if len(key) >= 8 {
			return binary.BigEndian.Uint64(key)
		}
		var v uint64
		for _, b := range key {
			v <<= 8
			v |= uint64(b)
		}
		return v << uint(8*(8-len(key)))
	},

	FormatKey: DefaultFormatter,

	Separator: func(dst, a, b []byte) []byte {
		i, n := SharedPrefixLen(a, b), len(dst)
		dst = append(dst, a...)

		min := len(a)
		if min > len(b) {
			min = len(b)
		}
		if i >= min {

			return dst
		}

		if a[i] >= b[i] {

			return dst
		}

		if i < len(b)-1 || a[i]+1 < b[i] {
			i += n
			dst[i]++
			return dst[:i+1]
		}

		i += n + 1
		for ; i < len(dst); i++ {
			if dst[i] != 0xff {
				dst[i]++
				return dst[:i+1]
			}
		}
		return dst
	},

	Successor: func(dst, a []byte) (ret []byte) {
		for i := 0; i < len(a); i++ {
			if a[i] != 0xff {
				dst = append(dst, a[:i+1]...)
				dst[len(dst)-1]++
				return dst
			}
		}

		return append(dst, a...)
	},

	ImmediateSuccessor: func(dst, a []byte) (ret []byte) {
		return append(append(dst, a...), 0x00)
	},

	Name: "leveldb.BytewiseComparator",
}

DefaultComparer is the default implementation of the Comparer interface. It uses the natural ordering, consistent with bytes.Compare.

View Source 
var DefaultFormatter = func(key []byte) fmt.Formatter {
	return FormatBytes(key)
}

DefaultFormatter is the default implementation of user key formatting: non-ASCII data is formatted as escaped hexadecimal values.

View Source 
var DefaultLogger defaultLogger

DefaultLogger logs to the Go stdlib logs.

View Source 
var DefaultMerger = &Merger{
	Merge: func(key, value []byte) (ValueMerger, error) {
		res := &AppendValueMerger{}
		res.buf = append(res.buf, value...)
		return res, nil
	},

	Name: "pebble.concatenate",
}

DefaultMerger is the default implementation of the Merger interface. It concatenates the two values to merge.

View Source 
var ErrCorruption = errors.New("pebble: corruption")

ErrCorruption is a marker to indicate that data in a file (WAL, MANIFEST, sstable) isn't in the expected format.

View Source 
var ErrNotFound = errors.New("pebble: not found")

ErrNotFound means that a get or delete call did not find the requested key.

View Source 
var InvalidInternalKey = MakeInternalKey(nil, 0, InternalKeyKindInvalid)

InvalidInternalKey is an invalid internal key for which Valid() will return false.

Functions

func CorruptionErrorf 

func CorruptionErrorf(format string, args ...interface{}) error

CorruptionErrorf formats according to a format specifier and returns the string as an error value that is marked as a corruption error.

func InternalCompare 

func InternalCompare(userCmp Compare, a, b InternalKey) int

InternalCompare compares two internal keys using the specified comparison function. For equal user keys, internal keys compare in descending sequence number order. For equal user keys and sequence numbers, internal keys compare in descending kind order (this may happen in practice among range keys).

func MakeFilename 

func MakeFilename(fileType FileType, dfn DiskFileNum) string

MakeFilename builds a filename from components.

func MakeFilepath 

func MakeFilepath(fs vfs.FS, dirname string, fileType FileType, dfn DiskFileNum) string

MakeFilepath builds a filepath from components.

func MakeTrailer 

func MakeTrailer(seqNum uint64, kind InternalKeyKind) uint64

MakeTrailer constructs an internal key trailer from the specified sequence number and kind.

func MarkCorruptionError 

func MarkCorruptionError(err error) error

MarkCorruptionError marks given error as a corruption error.

func MustExist 

func MustExist(fs vfs.FS, filename string, fataler Fataler, err error)

MustExist checks if err is an error indicating a file does not exist. If it is, it lists the containing directory's files to annotate the error with counts of the various types of files and invokes the provided fataler. See cockroachdb/cockroach#56490.

func ParseFilename 

func ParseFilename(fs vfs.FS, filename string) (fileType FileType, dfn DiskFileNum, ok bool)

ParseFilename parses the components from a filename.

func SeqNumFromTrailer 

func SeqNumFromTrailer(t uint64) uint64

SeqNumFromTrailer returns the sequence number component of a trailer.

func SharedPrefixLen 

func SharedPrefixLen(a, b []byte) int

SharedPrefixLen returns the largest i such that a[:i] equals b[:i]. This function can be useful in implementing the Comparer interface.

func Visible 

func Visible(seqNum uint64, snapshot, batchSnapshot uint64) bool

Visible returns true if a key with the provided sequence number is visible at the specified snapshot sequence numbers.

Types

type AbbreviatedKey 

type AbbreviatedKey func(key []byte) uint64

AbbreviatedKey returns a fixed length prefix of a user key such that AbbreviatedKey(a) < AbbreviatedKey(b) iff a < b and AbbreviatedKey(a) > AbbreviatedKey(b) iff a > b. If AbbreviatedKey(a) == AbbreviatedKey(b) an additional comparison is required to determine if the two keys are actually equal.

This helps optimize indexed batch comparisons for cache locality. If a Split function is specified, AbbreviatedKey usually returns the first eight bytes of the user key prefix in the order that gives the correct ordering.

type AppendValueMerger 

type AppendValueMerger struct {
	// contains filtered or unexported fields
}

AppendValueMerger concatenates merge operands in order from oldest to newest.

func (*AppendValueMerger) Finish 

func (a *AppendValueMerger) Finish(includesBase bool) ([]byte, io.Closer, error)

Finish returns the buffer that was constructed on-demand in `Merge{OlderNewer}()` calls.

func (*AppendValueMerger) MergeNewer 

func (a *AppendValueMerger) MergeNewer(value []byte) error

MergeNewer appends value to the result.

func (*AppendValueMerger) MergeOlder 

func (a *AppendValueMerger) MergeOlder(value []byte) error

MergeOlder prepends value to the result, which involves allocating a new buffer.

type ArchiveCleaner 

type ArchiveCleaner struct{}

ArchiveCleaner archives file instead delete.

func (ArchiveCleaner) Clean 

func (ArchiveCleaner) Clean(fs vfs.FS, fileType FileType, path string) error

Clean archives file.

func (ArchiveCleaner) String 

func (ArchiveCleaner) String() string

type AttributeAndLen 

type AttributeAndLen struct {
	ValueLen       int32
	ShortAttribute ShortAttribute
}

AttributeAndLen represents the pair of value length and the short attribute.

type BlockPropertyFilter 

type BlockPropertyFilter interface {
	// Name returns the name of the block property collector.
	Name() string
	// Intersects returns true if the set represented by prop intersects with
	// the set in the filter.
	Intersects(prop []byte) (bool, error)
}

BlockPropertyFilter is used in an Iterator to filter sstables and blocks within the sstable. It should not maintain any per-sstable state, and must be thread-safe.

type Cleaner 

type Cleaner interface {
	Clean(fs vfs.FS, fileType FileType, path string) error
}

Cleaner cleans obsolete files.

type Compare 

type Compare func(a, b []byte) int

Compare returns -1, 0, or +1 depending on whether a is 'less than', 'equal to' or 'greater than' b. The two arguments can only be 'equal' if their contents are exactly equal. Furthermore, the empty slice must be 'less than' any non-empty slice. Compare is used to compare user keys, such as those passed as arguments to the various DB methods, as well as those returned from Separator, Successor, and Split.

type Comparer 

type Comparer struct {
	Compare            Compare
	Equal              Equal
	AbbreviatedKey     AbbreviatedKey
	FormatKey          FormatKey
	FormatValue        FormatValue
	Separator          Separator
	Split              Split
	Successor          Successor
	ImmediateSuccessor ImmediateSuccessor

	// Name is the name of the comparer.
	//
	// The Level-DB on-disk format stores the comparer name, and opening a
	// database with a different comparer from the one it was created with
	// will result in an error.
	Name string
}

Comparer defines a total ordering over the space of []byte keys: a 'less than' relationship.

type DeletableValueMerger 

type DeletableValueMerger interface {
	ValueMerger

	// DeletableFinish enables a value merger to indicate that the result of a merge operation
	// is non-existent. See Finish for a description of includesBase.
	DeletableFinish(includesBase bool) (value []byte, delete bool, closer io.Closer, err error)
}

DeletableValueMerger is an extension to ValueMerger which allows indicating that the result of a merge operation is non-existent. Such non-existent entries will eventually be deleted during compaction. Note that during compaction, non-existence of the result of a merge means that the merge operands will not result in any record being output. This is not the same as transforming the merge operands into a deletion tombstone, as older merge operands will still be visible during iteration. Deletion of the merge operands in this way is akin to the way a SingleDelete+Set combine into non-existence while leaving older records for the same key unaffected.

type DeleteCleaner 

type DeleteCleaner struct{}

DeleteCleaner deletes file.

func (DeleteCleaner) Clean 

func (DeleteCleaner) Clean(fs vfs.FS, fileType FileType, path string) error

Clean removes file.

func (DeleteCleaner) String 

func (DeleteCleaner) String() string

type DiskFileNum 

type DiskFileNum struct {
	// contains filtered or unexported fields
}

A DiskFileNum is just a FileNum belonging to a file which exists on disk. Note that a FileNum is an internal DB identifier and it could belong to files which don't exist on disk. An example would be virtual sstable FileNums. Converting a DiskFileNum to a FileNum is always valid, whereas converting a FileNum to DiskFileNum may not be valid and care should be taken to prove that the FileNum actually exists on disk.

func (DiskFileNum) FileNum 

func (dfn DiskFileNum) FileNum() FileNum

FileNum converts a DiskFileNum to a FileNum. This conversion is always valid.

func (DiskFileNum) SafeFormat 

func (dfn DiskFileNum) SafeFormat(w redact.SafePrinter, verb rune)

SafeFormat implements redact.SafeFormatter.

func (DiskFileNum) String 

func (dfn DiskFileNum) String() string

type Equal 

type Equal func(a, b []byte) bool

Equal returns true if a and b are equivalent. For a given Compare, Equal(a,b) must return true iff Compare(a,b) returns zero, that is, Equal is a (potentially faster) specialization of Compare.

type Fataler 

type Fataler interface {
	Fatalf(format string, args ...interface{})
}

A Fataler fatals a process with a message when called.

type FileNum 

type FileNum uint64

FileNum is an internal DB identifier for a file.

func (FileNum) DiskFileNum 

func (fn FileNum) DiskFileNum() DiskFileNum

DiskFileNum converts a FileNum to a DiskFileNum. DiskFileNum should only be called if the caller can ensure that the FileNum belongs to a physical file on disk. These could be manifests, log files, physical sstables on disk, the options file, but not virtual sstables.

func (FileNum) SafeFormat 

func (fn FileNum) SafeFormat(w redact.SafePrinter, _ rune)

SafeFormat implements redact.SafeFormatter.

func (FileNum) String 

func (fn FileNum) String() string

String returns a string representation of the file number.

type FileType 

type FileType int

FileType enumerates the types of files found in a DB. 

const (
	FileTypeLog FileType = iota
	FileTypeLock
	FileTypeTable
	FileTypeManifest
	FileTypeCurrent
	FileTypeOptions
	FileTypeOldTemp
	FileTypeTemp
)

The FileType enumeration.

type FilterPolicy 

type FilterPolicy interface {
	// Name names the filter policy.
	Name() string

	// MayContain returns whether the encoded filter may contain given key.
	// False positives are possible, where it returns true for keys not in the
	// original set.
	MayContain(ftype FilterType, filter, key []byte) bool

	// NewWriter creates a new FilterWriter.
	NewWriter(ftype FilterType) FilterWriter
}

FilterPolicy is an algorithm for probabilistically encoding a set of keys. The canonical implementation is a Bloom filter.

Every FilterPolicy has a name. This names the algorithm itself, not any one particular instance. Aspects specific to a particular instance, such as the set of keys or any other parameters, will be encoded in the []byte filter returned by NewWriter.

The name may be written to files on disk, along with the filter data. To use these filters, the FilterPolicy name at the time of writing must equal the name at the time of reading. If they do not match, the filters will be ignored, which will not affect correctness but may affect performance.

type FilterType 

type FilterType int

FilterType is the level at which to apply a filter: block or table. 

const (
	TableFilter FilterType = iota
)

The available filter types.

func (FilterType) String 

func (t FilterType) String() string

type FilterWriter 

type FilterWriter interface {
	// AddKey adds a key to the current filter block.
	AddKey(key []byte)

	// Finish appends to dst an encoded filter tha holds the current set of
	// keys. The writer state is reset after the call to Finish allowing the
	// writer to be reused for the creation of additional filters.
	Finish(dst []byte) []byte
}

FilterWriter provides an interface for creating filter blocks. See FilterPolicy for more details about filters.

type FormatBytes 

type FormatBytes []byte

FormatBytes formats a byte slice using hexadecimal escapes for non-ASCII data.

func (FormatBytes) Format 

func (p FormatBytes) Format(s fmt.State, c rune)

Format implements the fmt.Formatter interface.

type FormatKey 

type FormatKey func(key []byte) fmt.Formatter

FormatKey returns a formatter for the user key.

type FormatValue 

type FormatValue func(key, value []byte) fmt.Formatter

FormatValue returns a formatter for the user value. The key is also specified for the value formatter in order to support value formatting that is dependent on the key.

type GaugeSampleMetric 

type GaugeSampleMetric struct {
	// contains filtered or unexported fields
}

GaugeSampleMetric is used to measure a gauge value (e.g. queue length) by accumulating samples of that gauge.

func (*GaugeSampleMetric) AddSample 

func (gsm *GaugeSampleMetric) AddSample(sample int64)

AddSample adds the given sample.

func (*GaugeSampleMetric) Mean 

func (gsm *GaugeSampleMetric) Mean() float64

Mean returns the mean value.

func (*GaugeSampleMetric) Merge 

func (gsm *GaugeSampleMetric) Merge(x GaugeSampleMetric)

Merge accumulates the information from another gauge metric.

func (*GaugeSampleMetric) Subtract 

func (gsm *GaugeSampleMetric) Subtract(x GaugeSampleMetric)

Subtract subtracts the information from another gauge metric.

type ImmediateSuccessor 

type ImmediateSuccessor func(dst, a []byte) []byte

ImmediateSuccessor is invoked with a prefix key ([Split(a) == len(a)]) and returns the smallest key that is larger than the given prefix a. ImmediateSuccessor must return a prefix key k such that: 

Split(k) == len(k) and Compare(k, a) > 0

and there exists no representable k2 such that: 

Split(k2) == len(k2) and Compare(k2, a) > 0 and Compare(k2, k) < 0

As an example, an implementation built on the natural byte ordering using bytes.Compare could append a `\0` to `a`.

The dst parameter may be used to store the returned key, though it is valid to pass nil. The returned key must be valid to pass to Compare.

type InMemLogger 

type InMemLogger struct {
	// contains filtered or unexported fields
}

InMemLogger implements Logger using an in-memory buffer (used for testing). The buffer can be read via String() and cleared via Reset().

func (*InMemLogger) Fatalf 

func (b *InMemLogger) Fatalf(format string, args ...interface{})

Fatalf is part of the Logger interface.

func (*InMemLogger) Infof 

func (b *InMemLogger) Infof(format string, args ...interface{})

Infof is part of the Logger interface.

func (*InMemLogger) Reset 

func (b *InMemLogger) Reset()

Reset clears the internal buffer.

func (*InMemLogger) String 

func (b *InMemLogger) String() string

String returns the current internal buffer.

type InternalIterator 

type InternalIterator interface {
	// SeekGE moves the iterator to the first key/value pair whose key is greater
	// than or equal to the given key. Returns the key and value if the iterator
	// is pointing at a valid entry, and (nil, nilv) otherwise. Note that SeekGE
	// only checks the upper bound. It is up to the caller to ensure that key
	// is greater than or equal to the lower bound.
	SeekGE(key []byte, flags SeekGEFlags) (*InternalKey, LazyValue)

	// SeekPrefixGE moves the iterator to the first key/value pair whose key is
	// greater than or equal to the given key. Returns the key and value if the
	// iterator is pointing at a valid entry, and (nil, nilv) otherwise. Note that
	// SeekPrefixGE only checks the upper bound. It is up to the caller to ensure
	// that key is greater than or equal to the lower bound.
	//
	// The prefix argument is used by some InternalIterator implementations (e.g.
	// sstable.Reader) to avoid expensive operations. A user-defined Split
	// function must be supplied to the Comparer for the DB. The supplied prefix
	// will be the prefix of the given key returned by that Split function. If
	// the iterator is able to determine that no key with the prefix exists, it
	// can return (nil,nilv). Unlike SeekGE, this is not an indication that
	// iteration is exhausted.
	//
	// Note that the iterator may return keys not matching the prefix. It is up
	// to the caller to check if the prefix matches.
	//
	// Calling SeekPrefixGE places the receiver into prefix iteration mode. Once
	// in this mode, reverse iteration may not be supported and will return an
	// error. Note that pebble/Iterator.SeekPrefixGE has this same restriction on
	// not supporting reverse iteration in prefix iteration mode until a
	// different positioning routine (SeekGE, SeekLT, First or Last) switches the
	// iterator out of prefix iteration.
	SeekPrefixGE(prefix, key []byte, flags SeekGEFlags) (*InternalKey, LazyValue)

	// SeekLT moves the iterator to the last key/value pair whose key is less
	// than the given key. Returns the key and value if the iterator is pointing
	// at a valid entry, and (nil, nilv) otherwise. Note that SeekLT only checks
	// the lower bound. It is up to the caller to ensure that key is less than
	// the upper bound.
	SeekLT(key []byte, flags SeekLTFlags) (*InternalKey, LazyValue)

	// First moves the iterator the the first key/value pair. Returns the key and
	// value if the iterator is pointing at a valid entry, and (nil, nilv)
	// otherwise. Note that First only checks the upper bound. It is up to the
	// caller to ensure that First() is not called when there is a lower bound,
	// and instead call SeekGE(lower).
	First() (*InternalKey, LazyValue)

	// Last moves the iterator the the last key/value pair. Returns the key and
	// value if the iterator is pointing at a valid entry, and (nil, nilv)
	// otherwise. Note that Last only checks the lower bound. It is up to the
	// caller to ensure that Last() is not called when there is an upper bound,
	// and instead call SeekLT(upper).
	Last() (*InternalKey, LazyValue)

	// Next moves the iterator to the next key/value pair. Returns the key and
	// value if the iterator is pointing at a valid entry, and (nil, nilv)
	// otherwise. Note that Next only checks the upper bound. It is up to the
	// caller to ensure that key is greater than or equal to the lower bound.
	//
	// It is valid to call Next when the iterator is positioned before the first
	// key/value pair due to either a prior call to SeekLT or Prev which returned
	// (nil, nilv). It is not allowed to call Next when the previous call to SeekGE,
	// SeekPrefixGE or Next returned (nil, nilv).
	Next() (*InternalKey, LazyValue)

	// NextPrefix moves the iterator to the next key/value pair with a different
	// prefix than the key at the current iterator position. Returns the key and
	// value if the iterator is pointing at a valid entry, and (nil, nil)
	// otherwise. Note that NextPrefix only checks the upper bound. It is up to
	// the caller to ensure that key is greater than or equal to the lower
	// bound.
	//
	// NextPrefix is passed the immediate successor to the current prefix key. A
	// valid implementation of NextPrefix is to call SeekGE with succKey.
	//
	// It is not allowed to call NextPrefix when the previous call was a reverse
	// positioning operation or a call to a forward positioning method that
	// returned (nil, nilv). It is also not allowed to call NextPrefix when the
	// iterator is in prefix iteration mode.
	NextPrefix(succKey []byte) (*InternalKey, LazyValue)

	// Prev moves the iterator to the previous key/value pair. Returns the key
	// and value if the iterator is pointing at a valid entry, and (nil, nilv)
	// otherwise. Note that Prev only checks the lower bound. It is up to the
	// caller to ensure that key is less than the upper bound.
	//
	// It is valid to call Prev when the iterator is positioned after the last
	// key/value pair due to either a prior call to SeekGE or Next which returned
	// (nil, nilv). It is not allowed to call Prev when the previous call to SeekLT
	// or Prev returned (nil, nilv).
	Prev() (*InternalKey, LazyValue)

	// Error returns any accumulated error. It may not include errors returned
	// to the client when calling LazyValue.Value().
	Error() error

	// Close closes the iterator and returns any accumulated error. Exhausting
	// all the key/value pairs in a table is not considered to be an error.
	// It is valid to call Close multiple times. Other methods should not be
	// called after the iterator has been closed.
	Close() error

	// SetBounds sets the lower and upper bounds for the iterator. Note that the
	// result of Next and Prev will be undefined until the iterator has been
	// repositioned with SeekGE, SeekPrefixGE, SeekLT, First, or Last.
	//
	// The bounds provided must remain valid until a subsequent call to
	// SetBounds has returned. This requirement exists so that iterator
	// implementations may compare old and new bounds to apply low-level
	// optimizations.
	SetBounds(lower, upper []byte)

	fmt.Stringer
}

InternalIterator iterates over a DB's key/value pairs in key order. Unlike the Iterator interface, the returned keys are InternalKeys composed of the user-key, a sequence number and a key kind. In forward iteration, key/value pairs for identical user-keys are returned in descending sequence order. In reverse iteration, key/value pairs for identical user-keys are returned in ascending sequence order.

InternalIterators provide 5 absolute positioning methods and 2 relative positioning methods. The absolute positioning methods are:

- SeekGE - SeekPrefixGE - SeekLT - First - Last

The relative positioning methods are:

- Next - Prev

The relative positioning methods can be used in conjunction with any of the absolute positioning methods with one exception: SeekPrefixGE does not support reverse iteration via Prev. It is undefined to call relative positioning methods without ever calling an absolute positioning method.

InternalIterators can optionally implement a prefix iteration mode. This mode is entered by calling SeekPrefixGE and exited by any other absolute positioning method (SeekGE, SeekLT, First, Last). When in prefix iteration mode, a call to Next will advance to the next key which has the same "prefix" as the one supplied to SeekPrefixGE. Note that "prefix" in this context is not a strict byte prefix, but defined by byte equality for the result of the Comparer.Split method. An InternalIterator is not required to support prefix iteration mode, and can implement SeekPrefixGE by forwarding to SeekGE. When the iteration prefix is exhausted, it is not valid to call Next on an internal iterator that's already returned (nil,nilv) or a key beyond the prefix.

Bounds, [lower, upper), can be set on iterators, either using the SetBounds() function in the interface, or in implementation specific ways during iterator creation. The forward positioning routines (SeekGE, First, and Next) only check the upper bound. The reverse positioning routines (SeekLT, Last, and Prev) only check the lower bound. It is up to the caller to ensure that the forward positioning routines respect the lower bound and the reverse positioning routines respect the upper bound (i.e. calling SeekGE instead of First if there is a lower bound, and SeekLT instead of Last if there is an upper bound). This imposition is done in order to elevate that enforcement to the caller (generally pebble.Iterator or pebble.mergingIter) rather than having it duplicated in every InternalIterator implementation.

Additionally, the caller needs to ensure that SeekGE/SeekPrefixGE are not called with a key > the upper bound, and SeekLT is not called with a key < the lower bound. InternalIterator implementations are required to respect the iterator bounds, never returning records outside of the bounds with one exception: an iterator may generate synthetic RANGEDEL marker records. See levelIter.syntheticBoundary for the sole existing example of this behavior. Specifically, levelIter can return synthetic keys whose user key is equal to the lower/upper bound.

The bounds provided to an internal iterator must remain valid until a subsequent call to SetBounds has returned. This requirement exists so that iterator implementations may compare old and new bounds to apply low-level optimizations. The pebble.Iterator satisfies this requirement by maintaining two bound buffers and switching between them.

An iterator must be closed after use, but it is not necessary to read an iterator until exhaustion.

An iterator is not goroutine-safe, but it is safe to use multiple iterators concurrently, either in separate goroutines or switching between the iterators in a single goroutine.

It is also safe to use an iterator concurrently with modifying its underlying DB, if that DB permits modification. However, the resultant key/value pairs are not guaranteed to be a consistent snapshot of that DB at a particular point in time.

InternalIterators accumulate errors encountered during operation, exposing them through the Error method. All of the absolute positioning methods reset any accumulated error before positioning. Relative positioning methods return without advancing if the iterator has accumulated an error.

nilv == shorthand for LazyValue{}, which represents a nil value.

type InternalIteratorStats 

type InternalIteratorStats struct {
	// Bytes in the loaded blocks. If the block was compressed, this is the
	// compressed bytes. Currently, only the index blocks, data blocks
	// containing points, and filter blocks are included.
	BlockBytes uint64
	// Subset of BlockBytes that were in the block cache.
	BlockBytesInCache uint64
	// BlockReadDuration accumulates the duration spent fetching blocks
	// due to block cache misses.
	// TODO(sumeer): this currently excludes the time spent in Reader creation,
	// and in reading the rangedel and rangekey blocks. Fix that.
	BlockReadDuration time.Duration

	// Bytes in keys that were iterated over. Currently, only point keys are
	// included.
	KeyBytes uint64
	// Bytes in values that were iterated over. Currently, only point values are
	// included. For separated values, this is the size of the handle.
	ValueBytes uint64
	// The count of points iterated over.
	PointCount uint64
	// Points that were iterated over that were covered by range tombstones. It
	// can be useful for discovering instances of
	// https://github.com/idrecun/go-ethereum/vendoring/pebble/issues/1070.
	PointsCoveredByRangeTombstones uint64

	// Stats related to points in value blocks encountered during iteration.
	// These are useful to understand outliers, since typical user facing
	// iteration should tend to only look at the latest point, and hence have
	// the following stats close to 0.
	SeparatedPointValue struct {
		// Count is a count of points that were in value blocks. This is not a
		// subset of PointCount: PointCount is produced by mergingIter and if
		// positioned once, and successful in returning a point, will have a
		// PointCount of 1, regardless of how many sstables (and memtables etc.)
		// in the heap got positioned. The count here includes every sstable
		// iterator that got positioned in the heap.
		Count uint64
		// ValueBytes represent the total byte length of the values (in value
		// blocks) of the points corresponding to Count.
		ValueBytes uint64
		// ValueBytesFetched is the total byte length of the values (in value
		// blocks) that were retrieved.
		ValueBytesFetched uint64
	}
}

InternalIteratorStats contains miscellaneous stats produced by InternalIterators that are part of the InternalIterator tree. Not every field is relevant for an InternalIterator implementation. The field values are aggregated as one goes up the InternalIterator tree.

func (*InternalIteratorStats) Merge 

func (s *InternalIteratorStats) Merge(from InternalIteratorStats)

Merge merges the stats in from into the given stats.

func (*InternalIteratorStats) SafeFormat 

func (s *InternalIteratorStats) SafeFormat(p redact.SafePrinter, verb rune)

SafeFormat implements the redact.SafeFormatter interface.

func (*InternalIteratorStats) String 

func (s *InternalIteratorStats) String() string

type InternalKey 

type InternalKey struct {
	UserKey []byte
	Trailer uint64
}

InternalKey is a key used for the in-memory and on-disk partial DBs that make up a pebble DB.

It consists of the user key (as given by the code that uses package pebble) followed by 8-bytes of metadata:

  • 1 byte for the type of internal key: delete or set,
  • 7 bytes for a uint56 sequence number, in little-endian format.

func DecodeInternalKey 

func DecodeInternalKey(encodedKey []byte) InternalKey

DecodeInternalKey decodes an encoded internal key. See InternalKey.Encode().

func MakeExclusiveSentinelKey 

func MakeExclusiveSentinelKey(kind InternalKeyKind, userKey []byte) InternalKey

MakeExclusiveSentinelKey constructs an internal key that is an exclusive sentinel key, used as the upper boundary for an sstable when a ranged key is the largest key in an sstable.

func MakeInternalKey 

func MakeInternalKey(userKey []byte, seqNum uint64, kind InternalKeyKind) InternalKey

MakeInternalKey constructs an internal key from a specified user key, sequence number and kind.

func MakeRangeDeleteSentinelKey 

func MakeRangeDeleteSentinelKey(userKey []byte) InternalKey

MakeRangeDeleteSentinelKey constructs an internal key that is a range deletion sentinel key, used as the upper boundary for an sstable when a range deletion is the largest key in an sstable.

func MakeSearchKey 

func MakeSearchKey(userKey []byte) InternalKey

MakeSearchKey constructs an internal key that is appropriate for searching for a the specified user key. The search key contain the maximal sequence number and kind ensuring that it sorts before any other internal keys for the same user key.

func ParseInternalKey 

func ParseInternalKey(s string) InternalKey

ParseInternalKey parses the string representation of an internal key. The format is <user-key>.<kind>.<seq-num>. If the seq-num starts with a "b" it is marked as a batch-seq-num (i.e. the InternalKeySeqNumBatch bit is set).

func ParsePrettyInternalKey 

func ParsePrettyInternalKey(s string) InternalKey

ParsePrettyInternalKey parses the pretty string representation of an internal key. The format is <user-key>#<seq-num>,<kind>.

func (InternalKey) Clone 

func (k InternalKey) Clone() InternalKey

Clone clones the storage for the UserKey component of the key.

func (*InternalKey) CopyFrom 

func (k *InternalKey) CopyFrom(k2 InternalKey)

CopyFrom converts this InternalKey into a clone of the passed-in InternalKey, reusing any space already used for the current UserKey.

func (InternalKey) Encode 

func (k InternalKey) Encode(buf []byte)

Encode encodes the receiver into the buffer. The buffer must be large enough to hold the encoded data. See InternalKey.Size().

func (InternalKey) EncodeTrailer 

func (k InternalKey) EncodeTrailer() [8]byte

EncodeTrailer returns the trailer encoded to an 8-byte array.

func (InternalKey) IsExclusiveSentinel 

func (k InternalKey) IsExclusiveSentinel() bool

IsExclusiveSentinel returns whether this internal key excludes point keys with the same user key if used as an end boundary. See the comment on InternalKeyRangeDeletionSentinel.

func (InternalKey) Kind 

func (k InternalKey) Kind() InternalKeyKind

Kind returns the kind component of the key.

func (InternalKey) Pretty 

func (k InternalKey) Pretty(f FormatKey) fmt.Formatter

Pretty returns a formatter for the key.

func (InternalKey) Separator 

func (k InternalKey) Separator(
	cmp Compare, sep Separator, buf []byte, other InternalKey,
) InternalKey

Separator returns a separator key such that k <= x && x < other, where less than is consistent with the Compare function. The buf parameter may be used to store the returned InternalKey.UserKey, though it is valid to pass a nil. See the Separator type for details on separator keys.

func (InternalKey) SeqNum 

func (k InternalKey) SeqNum() uint64

SeqNum returns the sequence number component of the key.

func (*InternalKey) SetKind 

func (k *InternalKey) SetKind(kind InternalKeyKind)

SetKind sets the kind component of the key.

func (*InternalKey) SetSeqNum 

func (k *InternalKey) SetSeqNum(seqNum uint64)

SetSeqNum sets the sequence number component of the key.

func (InternalKey) Size 

func (k InternalKey) Size() int

Size returns the encoded size of the key.

func (InternalKey) String 

func (k InternalKey) String() string

String returns a string representation of the key.

func (InternalKey) Successor 

func (k InternalKey) Successor(cmp Compare, succ Successor, buf []byte) InternalKey

Successor returns a successor key such that k <= x. A simple implementation may return k unchanged. The buf parameter may be used to store the returned InternalKey.UserKey, though it is valid to pass a nil.

func (InternalKey) Valid 

func (k InternalKey) Valid() bool

Valid returns true if the key has a valid kind.

func (InternalKey) Visible 

func (k InternalKey) Visible(snapshot, batchSnapshot uint64) bool

Visible returns true if the key is visible at the specified snapshot sequence number.

type InternalKeyKind 

type InternalKeyKind uint8

InternalKeyKind enumerates the kind of key: a deletion tombstone, a set value, a merged value, etc. 

const (
	InternalKeyKindDelete  InternalKeyKind = 0
	InternalKeyKindSet     InternalKeyKind = 1
	InternalKeyKindMerge   InternalKeyKind = 2
	InternalKeyKindLogData InternalKeyKind = 3

	// InternalKeyKindSingleDelete (SINGLEDEL) is a performance optimization
	// solely for compactions (to reduce write amp and space amp). Readers other
	// than compactions should treat SINGLEDEL as equivalent to a DEL.
	// Historically, it was simpler for readers other than compactions to treat
	// SINGLEDEL as equivalent to DEL, but as of the introduction of
	// InternalKeyKindSSTableInternalObsoleteBit, this is also necessary for
	// correctness.
	InternalKeyKindSingleDelete InternalKeyKind = 7
	//InternalKeyKindColumnFamilySingleDelete InternalKeyKind = 8
	//InternalKeyKindBeginPrepareXID          InternalKeyKind = 9
	//InternalKeyKindEndPrepareXID            InternalKeyKind = 10
	//InternalKeyKindCommitXID                InternalKeyKind = 11
	//InternalKeyKindRollbackXID              InternalKeyKind = 12
	//InternalKeyKindNoop                     InternalKeyKind = 13
	//InternalKeyKindColumnFamilyRangeDelete  InternalKeyKind = 14
	InternalKeyKindRangeDelete InternalKeyKind = 15

	// InternalKeyKindSeparator is a key used for separator / successor keys
	// written to sstable block indexes.
	//
	// NOTE: the RocksDB value has been repurposed. This was done to ensure that
	// keys written to block indexes with value "17" (when 17 happened to be the
	// max value, and InternalKeyKindMax was therefore set to 17), remain stable
	// when new key kinds are supported in Pebble.
	InternalKeyKindSeparator InternalKeyKind = 17

	// InternalKeyKindSetWithDelete keys are SET keys that have met with a
	// DELETE or SINGLEDEL key in a prior compaction. This key kind is
	// specific to Pebble. See
	// https://github.com/idrecun/go-ethereum/vendoring/pebble/issues/1255.
	InternalKeyKindSetWithDelete InternalKeyKind = 18

	// InternalKeyKindRangeKeyDelete removes all range keys within a key range.
	// See the internal/rangekey package for more details.
	InternalKeyKindRangeKeyDelete InternalKeyKind = 19
	// InternalKeyKindRangeKeySet and InternalKeyKindRangeUnset represent
	// keys that set and unset values associated with ranges of key
	// space. See the internal/rangekey package for more details.
	InternalKeyKindRangeKeyUnset InternalKeyKind = 20
	InternalKeyKindRangeKeySet   InternalKeyKind = 21

	// InternalKeyKindIngestSST is used to distinguish a batch that corresponds to
	// the WAL entry for ingested sstables that are added to the flushable
	// queue. This InternalKeyKind cannot appear, amongst other key kinds in a
	// batch, or in an sstable.
	InternalKeyKindIngestSST InternalKeyKind = 22

	// InternalKeyKindDeleteSized keys behave identically to
	// InternalKeyKindDelete keys, except that they hold an associated uint64
	// value indicating the (len(key)+len(value)) of the shadowed entry the
	// tombstone is expected to delete. This value is used to inform compaction
	// heuristics, but is not required to be accurate for correctness.
	InternalKeyKindDeleteSized InternalKeyKind = 23

	// This maximum value isn't part of the file format. Future extensions may
	// increase this value.
	//
	// When constructing an internal key to pass to DB.Seek{GE,LE},
	// internalKeyComparer sorts decreasing by kind (after sorting increasing by
	// user key and decreasing by sequence number). Thus, use InternalKeyKindMax,
	// which sorts 'less than or equal to' any other valid internalKeyKind, when
	// searching for any kind of internal key formed by a certain user key and
	// seqNum.
	InternalKeyKindMax InternalKeyKind = 23

	// Internal to the sstable format. Not exposed by any sstable iterator.
	// Declared here to prevent definition of valid key kinds that set this bit.
	InternalKeyKindSSTableInternalObsoleteBit  InternalKeyKind = 64
	InternalKeyKindSSTableInternalObsoleteMask InternalKeyKind = 191

	// InternalKeyZeroSeqnumMaxTrailer is the largest trailer with a
	// zero sequence number.
	InternalKeyZeroSeqnumMaxTrailer = uint64(255)

	// A marker for an invalid key.
	InternalKeyKindInvalid InternalKeyKind = InternalKeyKindSSTableInternalObsoleteMask

	// InternalKeySeqNumBatch is a bit that is set on batch sequence numbers
	// which prevents those entries from being excluded from iteration.
	InternalKeySeqNumBatch = uint64(1 << 55)

	// InternalKeySeqNumMax is the largest valid sequence number.
	InternalKeySeqNumMax = uint64(1<<56 - 1)

	// InternalKeyRangeDeleteSentinel is the marker for a range delete sentinel
	// key. This sequence number and kind are used for the upper stable boundary
	// when a range deletion tombstone is the largest key in an sstable. This is
	// necessary because sstable boundaries are inclusive, while the end key of a
	// range deletion tombstone is exclusive.
	InternalKeyRangeDeleteSentinel = (InternalKeySeqNumMax << 8) | uint64(InternalKeyKindRangeDelete)

	// InternalKeyBoundaryRangeKey is the marker for a range key boundary. This
	// sequence number and kind are used during interleaved range key and point
	// iteration to allow an iterator to stop at range key start keys where
	// there exists no point key.
	InternalKeyBoundaryRangeKey = (InternalKeySeqNumMax << 8) | uint64(InternalKeyKindRangeKeySet)
)

These constants are part of the file format, and should not be changed.

func ParseKind 

func ParseKind(s string) InternalKeyKind

ParseKind parses the string representation of an internal key kind.

func TrailerKind 

func TrailerKind(trailer uint64) InternalKeyKind

TrailerKind returns the key kind of the key trailer.

func (InternalKeyKind) SafeFormat 

func (k InternalKeyKind) SafeFormat(w redact.SafePrinter, _ rune)

SafeFormat implements redact.SafeFormatter.

func (InternalKeyKind) String 

func (k InternalKeyKind) String() string

type LazyFetcher 

type LazyFetcher struct {
	// Fetcher, given a handle, returns the value.
	Fetcher ValueFetcher

	// Attribute includes the short attribute and value length.
	Attribute AttributeAndLen
	// contains filtered or unexported fields
}

LazyFetcher supports fetching a lazy value.

Fetcher and Attribute are to be initialized at creation time. The fields are arranged to reduce the sizeof this struct.

type LazyValue 

type LazyValue struct {
	// ValueOrHandle represents a value, or a handle to be passed to ValueFetcher.
	// - Fetcher == nil: ValueOrHandle is a value.
	// - Fetcher != nil: ValueOrHandle is a handle and Fetcher.Attribute is
	//   initialized.
	// The ValueOrHandle exposed by InternalIterator or Iterator may not be stable
	// if the iterator is stepped. To make it stable, make a copy using Clone.
	ValueOrHandle []byte
	// Fetcher provides support for fetching an actually lazy value.
	Fetcher *LazyFetcher
}

LazyValue represents a value that may not already have been extracted. Currently, it can represent either an in-place value (stored with the key) or a value stored in the value section. However, the interface is general enough to support values that are stored in separate files.

LazyValue is used in the InternalIterator interface, such that all positioning calls return (*InternalKey, LazyValue). It is also exposed via the public Iterator for callers that need to remember a recent but not necessarily latest LazyValue, in case they need the actual value in the future. An example is a caller that is iterating in reverse and looking for the latest MVCC version for a key -- it cannot identify the latest MVCC version without stepping to the previous key-value pair e.g. storage.pebbleMVCCScanner in CockroachDB.

Performance note: It is important for this struct to not exceed a sizeof 32 bytes, for optimizing the common case of the in-place value. Prior to introducing LazyValue, we were passing around a []byte which is 24 bytes. Passing a 40 byte or larger struct causes performance to drop by 75% on some benchmarks that do tight iteration loops.

Memory management: This is subtle, but important for performance.

A LazyValue returned by an InternalIterator or Iterator is unstable in that repositioning the iterator will invalidate the memory inside it. A caller wishing to maintain that LazyValue needs to call LazyValue.Clone(). Note that this does not fetch the value if it is not in-place. Clone() should ideally not be called if LazyValue.Value() has been called, since the cloned LazyValue will forget the extracted/fetched value, and calling Value() on this clone will cause the value to be extracted again. That is, Clone() does not make any promise about the memory stability of the underlying value.

A user of an iterator that calls LazyValue.Value() wants as much as possible for the returned value []byte to point to iterator owned memory.

  1. [P1] The underlying iterator that owns that memory also needs a promise from that user that at any time there is at most one value []byte slice that the caller is expecting it to maintain. Otherwise, the underlying iterator has to maintain multiple such []byte slices which results in more complicated and inefficient code.

  2. [P2] The underlying iterator, in order to make the promise that it is maintaining the one value []byte slice, also needs a way to know when it is relieved of that promise. One way it is relieved of that promise is by being told that it is being repositioned. Typically, the owner of the value []byte slice is a sstable iterator, and it will know that it is relieved of the promise when it is repositioned. However, consider the case where the caller has used LazyValue.Clone() and repositioned the iterator (which is actually a tree of iterators). In this case the underlying sstable iterator may not even be open. LazyValue.Value() will still work (at a higher cost), but since the sstable iterator is not open, it does not have a mechanism to know when the retrieved value is no longer in use. We refer to this situation as "not satisfying P2". To handle this situation, the LazyValue.Value() method accepts a caller owned buffer, that the callee will use if needed. The callee explicitly tells the caller whether the []byte slice for the value is now owned by the caller. This will be true if the callee attempted to use buf and either successfully used it or allocated a new []byte slice.

To ground the above in reality, we consider three examples of callers of LazyValue.Value():

  • Iterator: it calls LazyValue.Value for its own use when merging values. When merging during reverse iteration, it may have cloned the LazyValue. In this case it calls LazyValue.Value() on the cloned value, merges it, and then calls LazyValue.Value() on the current iterator position and merges it. So it is honoring P1.

  • Iterator on behalf of Iterator clients: The Iterator.Value() method needs to call LazyValue.Value(). The client of Iterator is satisfying P1 because of the inherent Iterator interface constraint, i.e., it is calling Iterator.Value() on the current Iterator position. It is possible that the Iterator has cloned this LazyValue (for the reverse iteration case), which the client is unaware of, so the underlying sstable iterator may not be able to satisfy P2. This is ok because Iterator will call LazyValue.Value with its (reusable) owned buffer.

  • CockroachDB's pebbleMVCCScanner: This will use LazyValues from Iterator since during reverse iteration in order to find the highest version that satisfies a read it needs to clone the LazyValue, step back the iterator and then decide whether it needs the value from the previously cloned LazyValue. The pebbleMVCCScanner will satisfy P1. The P2 story is similar to the previous case in that it will call LazyValue.Value with its (reusable) owned buffer.

Corollary: callers that directly use InternalIterator can know that they have done nothing to interfere with promise P2 can pass in a nil buf and be sure that it will not trigger an allocation.

Repeated calling of LazyValue.Value: This is ok as long as the caller continues to satisfy P1. The previously fetched value will be remembered inside LazyValue to avoid fetching again. So if the caller's buffer is used the first time the value was fetched, it is still in use.

LazyValue fields are visible outside the package for use in InternalIterator implementations and in Iterator, but not meant for direct use by users of Pebble.

func MakeInPlaceValue 

func MakeInPlaceValue(val []byte) LazyValue

MakeInPlaceValue constructs an in-place value.

func (*LazyValue) Clone 

func (lv *LazyValue) Clone(buf []byte, fetcher *LazyFetcher) (LazyValue, []byte)

Clone creates a stable copy of the LazyValue, by appending bytes to buf. The fetcher parameter must be non-nil and may be over-written and used inside the returned LazyValue -- this is needed to avoid an allocation. Most callers have at most K cloned LazyValues, where K is hard-coded, so they can have a pool of exactly K LazyFetcher structs they can reuse in these calls. The alternative of allocating LazyFetchers from a sync.Pool is not viable since we have no code trigger for returning to the pool (LazyValues are simply GC'd).

NB: It is highly preferable that LazyValue.Value() has not been called, since the Clone will forget any previously extracted value, and a future call to Value will cause it to be fetched again. We do this since we don't want to reason about whether or not to clone an already extracted value inside the Fetcher (we don't). Property P1 applies here too: if lv1.Value() has been called, and then lv2 is created as a clone of lv1, then calling lv2.Value() can invalidate any backing memory maintained inside the fetcher for lv1 (even though these are the same values). We initially prohibited calling LazyValue.Clone() if LazyValue.Value() has been called, but there is at least one complex caller (pebbleMVCCScanner inside CockroachDB) where it is not easy to prove this invariant.

func (*LazyValue) InPlaceValue 

func (lv *LazyValue) InPlaceValue() []byte

InPlaceValue returns the value under the assumption that it is in-place. This is for Pebble-internal code.

func (*LazyValue) Len 

func (lv *LazyValue) Len() int

Len returns the length of the value.

func (*LazyValue) TryGetShortAttribute 

func (lv *LazyValue) TryGetShortAttribute() (ShortAttribute, bool)

TryGetShortAttribute returns the ShortAttribute and a bool indicating whether the ShortAttribute was populated.

func (*LazyValue) Value 

func (lv *LazyValue) Value(buf []byte) (val []byte, callerOwned bool, err error)

Value returns the underlying value.

type Logger 

type Logger interface {
	Infof(format string, args ...interface{})
	Fatalf(format string, args ...interface{})
}

Logger defines an interface for writing log messages.

type LoggerAndTracer 

type LoggerAndTracer interface {
	Logger
	// Eventf formats and emits a tracing log, if tracing is enabled in the
	// current context.
	Eventf(ctx context.Context, format string, args ...interface{})
	// IsTracingEnabled returns true if tracing is enabled. It can be used as an
	// optimization to avoid calling Eventf (which will be a noop when tracing
	// is not enabled) to avoid the overhead of boxing the args.
	IsTracingEnabled(ctx context.Context) bool
}

LoggerAndTracer defines an interface for logging and tracing.

type LoggerWithNoopTracer 

type LoggerWithNoopTracer struct {
	Logger
}

LoggerWithNoopTracer wraps a logger and does no tracing.

func (*LoggerWithNoopTracer) Eventf 

func (*LoggerWithNoopTracer) Eventf(ctx context.Context, format string, args ...interface{})

Eventf implements LoggerAndTracer.

func (*LoggerWithNoopTracer) IsTracingEnabled 

func (*LoggerWithNoopTracer) IsTracingEnabled(ctx context.Context) bool

IsTracingEnabled implements LoggerAndTracer.

type Merge 

type Merge func(key, value []byte) (ValueMerger, error)

Merge creates a ValueMerger for the specified key initialized with the value of one merge operand.

type Merger 

type Merger struct {
	Merge Merge

	// Name is the name of the merger.
	//
	// Pebble stores the merger name on disk, and opening a database with a
	// different merger from the one it was created with will result in an error.
	Name string
}

Merger defines an associative merge operation. The merge operation merges two or more values for a single key. A merge operation is requested by writing a value using {Batch,DB}.Merge(). The value at that key is merged with any existing value. It is valid to Set a value at a key and then Merge a new value. Similar to non-merged values, a merged value can be deleted by either Delete or DeleteRange.

The merge operation is invoked when a merge value is encountered during a read, either during a compaction or during iteration.

type NeedsFileContents 

type NeedsFileContents interface {
	// contains filtered or unexported methods
}

NeedsFileContents is implemented by a cleaner that needs the contents of the files that it is being asked to clean.

type NoopLoggerAndTracer 

type NoopLoggerAndTracer struct{}

NoopLoggerAndTracer does no logging and tracing. Remember that struct{} is special cased in Go and does not incur an allocation when it backs the interface LoggerAndTracer.

func (NoopLoggerAndTracer) Eventf 

func (l NoopLoggerAndTracer) Eventf(ctx context.Context, format string, args ...interface{})

Eventf implements LoggerAndTracer.

func (NoopLoggerAndTracer) Fatalf 

func (l NoopLoggerAndTracer) Fatalf(format string, args ...interface{})

Fatalf implements LoggerAndTracer.

func (NoopLoggerAndTracer) Infof 

func (l NoopLoggerAndTracer) Infof(format string, args ...interface{})

Infof implements LoggerAndTracer.

func (NoopLoggerAndTracer) IsTracingEnabled 

func (l NoopLoggerAndTracer) IsTracingEnabled(ctx context.Context) bool

IsTracingEnabled implements LoggerAndTracer.

type SeekGEFlags 

type SeekGEFlags uint8

SeekGEFlags holds flags that may configure the behavior of a forward seek. Not all flags are relevant to all iterators.

func (SeekGEFlags) BatchJustRefreshed 

func (s SeekGEFlags) BatchJustRefreshed() bool

BatchJustRefreshed is set by Seek[Prefix]GE when an iterator's view of an indexed batch was just refreshed. It serves as a signal to the batch iterator to ignore the TrySeekUsingNext optimization, because the external knowledge imparted by the TrySeekUsingNext flag does not apply to the batch iterator's position. See (pebble.Iterator).batchJustRefreshed.

func (SeekGEFlags) DisableBatchJustRefreshed 

func (s SeekGEFlags) DisableBatchJustRefreshed() SeekGEFlags

DisableBatchJustRefreshed returns the provided flags with the batch-just-refreshed bit unset.

func (SeekGEFlags) DisableRelativeSeek 

func (s SeekGEFlags) DisableRelativeSeek() SeekGEFlags

DisableRelativeSeek returns the provided flags with the relative-seek flag disabled.

func (SeekGEFlags) DisableTrySeekUsingNext 

func (s SeekGEFlags) DisableTrySeekUsingNext() SeekGEFlags

DisableTrySeekUsingNext returns the provided flags with the try-seek-using-next optimization disabled.

func (SeekGEFlags) EnableBatchJustRefreshed 

func (s SeekGEFlags) EnableBatchJustRefreshed() SeekGEFlags

EnableBatchJustRefreshed returns the provided flags with the batch-just-refreshed bit set. See BatchJustRefreshed for an explanation of this flag.

func (SeekGEFlags) EnableRelativeSeek 

func (s SeekGEFlags) EnableRelativeSeek() SeekGEFlags

EnableRelativeSeek returns the provided flags with the relative-seek flag enabled. See RelativeSeek for an explanation of this flag's use.

func (SeekGEFlags) EnableTrySeekUsingNext 

func (s SeekGEFlags) EnableTrySeekUsingNext() SeekGEFlags

EnableTrySeekUsingNext returns the provided flags with the try-seek-using-next optimization enabled. See TrySeekUsingNext for an explanation of this optimization.

func (SeekGEFlags) RelativeSeek 

func (s SeekGEFlags) RelativeSeek() bool

RelativeSeek is set when in the course of a forward positioning operation, a higher-level iterator seeks a lower-level iterator to a larger key than the one at the current iterator position.

Concretely, this occurs when the merging iterator observes a range deletion covering the key at a level's current position, and the merging iterator seeks the level to the range deletion's end key. During lazy-combined iteration, this flag signals to the level iterator that the seek is NOT an absolute-positioning operation from the perspective of the pebble.Iterator, and the level iterator must look for range keys in tables between the current iterator position and the new seeked position.

func (SeekGEFlags) TrySeekUsingNext 

func (s SeekGEFlags) TrySeekUsingNext() bool

TrySeekUsingNext indicates whether a performance optimization was enabled by a caller, indicating the caller has not done any action to move this iterator beyond the first key that would be found if this iterator were to honestly do the intended seek. For example, say the caller did a SeekGE(k1...), followed by SeekGE(k2...) where k1 <= k2, without any intermediate positioning calls. The caller can safely specify true for this parameter in the second call. As another example, say the caller did do one call to Next between the two Seek calls, and k1 < k2. Again, the caller can safely specify a true value for this parameter. Note that a false value is always safe. The callee is free to ignore the true value if its implementation does not permit this optimization.

We make the caller do this determination since a string comparison of k1, k2 is not necessarily cheap, and there may be many iterators in the iterator stack. Doing it once at the root of the iterator stack is cheaper.

This optimization could also be applied to SeekLT (where it would be trySeekUsingPrev). We currently only do it for SeekPrefixGE and SeekGE because this is where this optimization helps the performance of CockroachDB. The SeekLT cases in CockroachDB are typically accompanied with bounds that change between seek calls, and is optimized inside certain iterator implementations, like singleLevelIterator, without any extra parameter passing (though the same amortization of string comparisons could be done to improve that optimization, by making the root of the iterator stack do it).

type SeekLTFlags 

type SeekLTFlags uint8

SeekLTFlags holds flags that may configure the behavior of a reverse seek. Not all flags are relevant to all iterators.

func (SeekLTFlags) DisableRelativeSeek 

func (s SeekLTFlags) DisableRelativeSeek() SeekLTFlags

DisableRelativeSeek returns the provided flags with the relative-seek flag disabled.

func (SeekLTFlags) EnableRelativeSeek 

func (s SeekLTFlags) EnableRelativeSeek() SeekLTFlags

EnableRelativeSeek returns the provided flags with the relative-seek flag enabled. See RelativeSeek for an explanation of this flag's use.

func (SeekLTFlags) RelativeSeek 

func (s SeekLTFlags) RelativeSeek() bool

RelativeSeek is set when in the course of a reverse positioning operation, a higher-level iterator seeks a lower-level iterator to a smaller key than the one at the current iterator position.

Concretely, this occurs when the merging iterator observes a range deletion covering the key at a level's current position, and the merging iterator seeks the level to the range deletion's start key. During lazy-combined iteration, this flag signals to the level iterator that the seek is NOT an absolute-positioning operation from the perspective of the pebble.Iterator, and the level iterator must look for range keys in tables between the current iterator position and the new seeked position.

type Separator 

type Separator func(dst, a, b []byte) []byte

Separator is used to construct SSTable index blocks. A trivial implementation is `return a`, but appending fewer bytes leads to smaller SSTables.

Given keys a, b for which Compare(a, b) < 0, Separator returns a key k such that:

1. Compare(a, k) <= 0, and 2. Compare(k, b) < 0.

As a special case, b may be nil in which case the second condition is dropped.

For example, if dst, a and b are the []byte equivalents of the strings "aqua", "black" and "blue", then the result may be "aquablb". Similarly, if the arguments were "aqua", "green" and "", then the result may be "aquah".

type ShortAttribute 

type ShortAttribute uint8

ShortAttribute encodes a user-specified attribute of the value.

type ShortAttributeExtractor 

type ShortAttributeExtractor func(
	key []byte, keyPrefixLen int, value []byte) (ShortAttribute, error)

ShortAttributeExtractor is an extractor that given the value, will return the ShortAttribute.

type Split 

type Split func(a []byte) int

Split returns the length of the prefix of the user key that corresponds to the key portion of an MVCC encoding scheme to enable the use of prefix bloom filters.

The method will only ever be called with valid MVCC keys, that is, keys that the user could potentially store in the database. Pebble does not know which keys are MVCC keys and which are not, and may call Split on both MVCC keys and non-MVCC keys.

A trivial MVCC scheme is one in which Split() returns len(a). This corresponds to assigning a constant version to each key in the database. For performance reasons, it is preferable to use a `nil` split in this case.

The returned prefix must have the following properties:

  1. The prefix must be a byte prefix:

    bytes.HasPrefix(a, prefix(a))

  2. A key consisting of just a prefix must sort before all other keys with that prefix:

    Compare(prefix(a), a) < 0 if len(suffix(a)) > 0

  3. Prefixes must be used to order keys before suffixes:

    If Compare(a, b) <= 0, then Compare(prefix(a), prefix(b)) <= 0

  4. Suffixes themselves must be valid keys and comparable, respecting the same ordering as within a key.

    If Compare(prefix(a), prefix(b)) == 0, then Compare(suffix(a), suffix(b)) == Compare(a, b)

type Successor 

type Successor func(dst, a []byte) []byte

Successor returns a shortened key given a key a, such that Compare(k, a) >= 0. A simple implementation may return a unchanged. The dst parameter may be used to store the returned key, though it is valid to pass nil. The returned key must be valid to pass to Compare.

type ThroughputMetric 

type ThroughputMetric struct {
	// Bytes is the processes bytes by the component.
	Bytes int64
	// WorkDuration is the duration that the component spent doing work.
	WorkDuration time.Duration
	// IdleDuration is the duration that the component was idling, waiting for
	// work.
	IdleDuration time.Duration
}

ThroughputMetric is used to measure the byte throughput of some component that performs work in a single-threaded manner. The throughput can be approximated by Bytes/(WorkDuration+IdleTime). The idle time is represented separately, so that the user of this metric could approximate the peak throughput as Bytes/WorkTime. The metric is designed to be cumulative (see Merge).

func (*ThroughputMetric) Merge 

func (tm *ThroughputMetric) Merge(x ThroughputMetric)

Merge accumulates the information from another throughput metric.

func (*ThroughputMetric) PeakRate 

func (tm *ThroughputMetric) PeakRate() int64

PeakRate returns the approximate peak rate if there was no idling.

func (*ThroughputMetric) Rate 

func (tm *ThroughputMetric) Rate() int64

Rate returns the observed rate.

func (*ThroughputMetric) Subtract 

func (tm *ThroughputMetric) Subtract(x ThroughputMetric)

Subtract subtracts the information from another ThroughputMetric

func (*ThroughputMetric) Utilization 

func (tm *ThroughputMetric) Utilization() float64

Utilization returns a percent [0, 1.0] indicating the percent of time work was performed.

type ValueFetcher 

type ValueFetcher interface {
	// Fetch returns the value, given the handle. It is acceptable to call the
	// ValueFetcher.Fetch as long as the DB is open. However, one should assume
	// there is a fast-path when the iterator tree has not moved off the sstable
	// iterator that initially provided this LazyValue. Hence, to utilize this
	// fast-path the caller should try to decide whether it needs the value or
	// not as soon as possible, with minimal possible stepping of the iterator.
	//
	// buf will be used if the fetcher cannot satisfy P2 (see earlier comment).
	// If the fetcher attempted to use buf *and* len(buf) was insufficient, it
	// will allocate a new slice for the value. In either case it will set
	// callerOwned to true.
	Fetch(
		handle []byte, valLen int32, buf []byte) (val []byte, callerOwned bool, err error)
}

ValueFetcher is an interface for fetching a value.

type ValueMerger 

type ValueMerger interface {
	// MergeNewer adds an operand that is newer than all existing operands.
	// The caller retains ownership of value.
	//
	// If an error is returned the merge is aborted and no other methods must
	// be called.
	MergeNewer(value []byte) error

	// MergeOlder adds an operand that is older than all existing operands.
	// The caller retains ownership of value.
	//
	// If an error is returned the merge is aborted and no other methods must
	// be called.
	MergeOlder(value []byte) error

	// Finish does any final processing of the added operands and returns a
	// result. The caller can assume the returned byte slice will not be mutated.
	//
	// Finish must be the last function called on the ValueMerger. The caller
	// must not call any other ValueMerger functions after calling Finish.
	//
	// If `includesBase` is true, the oldest merge operand was part of the
	// merge. This will always be the true during normal iteration, but may be
	// false during compaction when only a subset of operands may be
	// available. Note that `includesBase` is set to true conservatively: a false
	// value means that we could not definitely determine that the base merge
	// operand was included.
	//
	// If a Closer is returned, the returned slice will remain valid until it is
	// closed. The caller must arrange for the closer to be eventually closed.
	Finish(includesBase bool) ([]byte, io.Closer, error)
}

ValueMerger receives merge operands one by one. The operand received is either newer or older than all operands received so far as indicated by the function names, `MergeNewer()` and `MergeOlder()`. Once all operands have been received, the client will invoke `Finish()` to obtain the final result. The order of a merge is not changed after the first call to `MergeNewer()` or `MergeOlder()`, i.e. the same method is used to submit all operands.

The implementation may choose to merge values into the result immediately upon receiving each operand, or buffer operands until Finish() is called. For example, buffering may be useful to avoid (de)serializing partial merge results.

The merge operation must be associative. That is, for the values A, B, C: 

Merge(A).MergeOlder(B).MergeOlder(C) == Merge(C).MergeNewer(B).MergeNewer(A)

Examples of merge operators are integer addition, list append, and string concatenation.

Source Files

View all Source files

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL
go.dev uses cookies from Google to deliver and enhance the quality of its services and to analyze traffic. Learn more.