ccprovider

package
v1.0.5 Latest Latest
Warning

This package is not in the latest version of its module.

 Go to latest Published: Dec 6, 2017 License: Apache-2.0 Imports: 16 Imported by: 5,329

Documentation

Index

Constants

This section is empty.

Variables

This section is empty.

Functions

func ChaincodePackageExists 

func ChaincodePackageExists(ccname string, ccversion string) (bool, error)

ChaincodePackageExists returns whether the chaincode package exists in the file system

func CheckInsantiationPolicy 

func CheckInsantiationPolicy(name, version string, cdLedger *ChaincodeData) error

func EnableCCInfoCache 

func EnableCCInfoCache()

EnableCCInfoCache can be called to enable the cache

func GetChaincodePackage 

func GetChaincodePackage(ccname string, ccversion string) ([]byte, error)

GetChaincodePackage returns the chaincode package from the file system

func GetInstalledChaincodes 

func GetInstalledChaincodes() (*pb.ChaincodeQueryResponse, error)

GetInstalledChaincodes returns a map whose key is the chaincode id and value is the ChaincodeDeploymentSpec struct for that chaincodes that have been installed (but not necessarily instantiated) on the peer by searching the chaincode install path

func NewCCInfoCache 

func NewCCInfoCache(cs CCCacheSupport) *ccInfoCacheImpl

NewCCInfoCache returns a new cache on top of the supplied CCInfoProvider instance

func PutChaincodeIntoFS 

func PutChaincodeIntoFS(depSpec *pb.ChaincodeDeploymentSpec) error

PutChaincodeIntoFS puts chaincode information in the file system (and also in the cache to prime it) if the cache is enabled, or directly from the file system otherwise

func RegisterChaincodeProviderFactory 

func RegisterChaincodeProviderFactory(ccfact ChaincodeProviderFactory)

RegisterChaincodeProviderFactory is to be called once to set the factory that will be used to obtain instances of ChaincodeProvider

func SetChaincodesPath 

func SetChaincodesPath(path string)

SetChaincodesPath sets the chaincode path for this peer

Types

type CCCacheSupport 

type CCCacheSupport interface {
	//GetChaincode is needed by the cache to get chaincode data
	GetChaincode(ccname string, ccversion string) (CCPackage, error)
}

type CCContext 

type CCContext struct {
	//ChainID chain id
	ChainID string

	//Name chaincode name
	Name string

	//Version used to construct the chaincode image and register
	Version string

	//TxID is the transaction id for the proposal (if any)
	TxID string

	//Syscc is this a system chaincode
	Syscc bool

	//SignedProposal for this invoke (if any)
	//this is kept here for access control and in case we need to pass something
	//from this to the chaincode
	SignedProposal *pb.SignedProposal

	//Proposal for this invoke (if any)
	//this is kept here just in case we need to pass something
	//from this to the chaincode
	Proposal *pb.Proposal
	// contains filtered or unexported fields
}

CCContext pass this around instead of string of args

func NewCCContext 

func NewCCContext(cid, name, version, txid string, syscc bool, signedProp *pb.SignedProposal, prop *pb.Proposal) *CCContext

NewCCContext just construct a new struct with whatever args

func (*CCContext) GetCanonicalName 

func (cccid *CCContext) GetCanonicalName() string

GetCanonicalName returns the canonical name associated with the proposal context

type CCInfoFSImpl 

type CCInfoFSImpl struct{}

CCInfoFSImpl provides the implementation for CC on the FS and the access to it It implements CCCacheSupport

func (*CCInfoFSImpl) GetChaincode 

func (*CCInfoFSImpl) GetChaincode(ccname string, ccversion string) (CCPackage, error)

GetChaincodeFromFS this is a wrapper for hiding package implementation.

func (*CCInfoFSImpl) PutChaincode 

func (*CCInfoFSImpl) PutChaincode(depSpec *pb.ChaincodeDeploymentSpec) (CCPackage, error)

PutChaincodeIntoFS is a wrapper for putting raw ChaincodeDeploymentSpec using CDSPackage. This is only used in UTs

type CCPackage 

type CCPackage interface {
	//InitFromBuffer initialize the package from bytes
	InitFromBuffer(buf []byte) (*ChaincodeData, error)

	// InitFromFS gets the chaincode from the filesystem (includes the raw bytes too)
	InitFromFS(ccname string, ccversion string) ([]byte, *pb.ChaincodeDeploymentSpec, error)

	// PutChaincodeToFS writes the chaincode to the filesystem
	PutChaincodeToFS() error

	// GetDepSpec gets the ChaincodeDeploymentSpec from the package
	GetDepSpec() *pb.ChaincodeDeploymentSpec

	// GetDepSpecBytes gets the serialized ChaincodeDeploymentSpec from the package
	GetDepSpecBytes() []byte

	// ValidateCC validates and returns the chaincode deployment spec corresponding to
	// ChaincodeData. The validation is based on the metadata from ChaincodeData
	// One use of this method is to validate the chaincode before launching
	ValidateCC(ccdata *ChaincodeData) error

	// GetPackageObject gets the object as a proto.Message
	GetPackageObject() proto.Message

	// GetChaincodeData gets the ChaincodeData
	GetChaincodeData() *ChaincodeData

	// GetId gets the fingerprint of the chaincode based on package computation
	GetId() []byte
}

CCPackage encapsulates a chaincode package which can be 

raw ChaincodeDeploymentSpec
SignedChaincodeDeploymentSpec

Attempt to keep the interface at a level with minimal interface for possible generalization.

func GetCCPackage 

func GetCCPackage(buf []byte) (CCPackage, error)

GetCCPackage tries each known package implementation one by one till the right package is found

func GetChaincodeFromFS 

func GetChaincodeFromFS(ccname string, ccversion string) (CCPackage, error)

GetChaincodeFromFS retrieves chaincode information from the file system

type CDSData 

type CDSData struct {
	//CodeHash hash of CodePackage from ChaincodeDeploymentSpec
	CodeHash []byte `protobuf:"bytes,1,opt,name=codehash,proto3"`

	//MetaDataHash hash of Name and Version from ChaincodeDeploymentSpec
	MetaDataHash []byte `protobuf:"bytes,2,opt,name=metadatahash,proto3"`
}

CDSData is data stored in the LSCC on instantiation of a CC for CDSPackage. This needs to be serialized for ChaincodeData hence the protobuf format

func (*CDSData) Equals 

func (data *CDSData) Equals(other *CDSData) bool

Equals data equals other

func (*CDSData) ProtoMessage 

func (*CDSData) ProtoMessage()

ProtoMessage just exists to make proto happy

func (*CDSData) Reset 

func (data *CDSData) Reset()

Reset resets

func (*CDSData) String 

func (data *CDSData) String() string

String converts to string

type CDSPackage 

type CDSPackage struct {
	// contains filtered or unexported fields
}

CDSPackage encapsulates ChaincodeDeploymentSpec.

func (*CDSPackage) GetChaincodeData 

func (ccpack *CDSPackage) GetChaincodeData() *ChaincodeData

GetChaincodeData gets the ChaincodeData

func (*CDSPackage) GetDepSpec 

func (ccpack *CDSPackage) GetDepSpec() *pb.ChaincodeDeploymentSpec

GetDepSpec gets the ChaincodeDeploymentSpec from the package

func (*CDSPackage) GetDepSpecBytes 

func (ccpack *CDSPackage) GetDepSpecBytes() []byte

GetDepSpecBytes gets the serialized ChaincodeDeploymentSpec from the package

func (*CDSPackage) GetId 

func (ccpack *CDSPackage) GetId() []byte

GetId gets the fingerprint of the chaincode based on package computation

func (*CDSPackage) GetPackageObject 

func (ccpack *CDSPackage) GetPackageObject() proto.Message

GetPackageObject gets the ChaincodeDeploymentSpec as proto.Message

func (*CDSPackage) InitFromBuffer 

func (ccpack *CDSPackage) InitFromBuffer(buf []byte) (*ChaincodeData, error)

InitFromBuffer sets the buffer if valid and returns ChaincodeData

func (*CDSPackage) InitFromFS 

func (ccpack *CDSPackage) InitFromFS(ccname string, ccversion string) ([]byte, *pb.ChaincodeDeploymentSpec, error)

InitFromFS returns the chaincode and its package from the file system

func (*CDSPackage) PutChaincodeToFS 

func (ccpack *CDSPackage) PutChaincodeToFS() error

PutChaincodeToFS - serializes chaincode to a package on the file system

func (*CDSPackage) ValidateCC 

func (ccpack *CDSPackage) ValidateCC(ccdata *ChaincodeData) error

ValidateCC returns error if the chaincode is not found or if its not a ChaincodeDeploymentSpec

type ChaincodeData 

type ChaincodeData struct {
	//Name of the chaincode
	Name string `protobuf:"bytes,1,opt,name=name"`

	//Version of the chaincode
	Version string `protobuf:"bytes,2,opt,name=version"`

	//Escc for the chaincode instance
	Escc string `protobuf:"bytes,3,opt,name=escc"`

	//Vscc for the chaincode instance
	Vscc string `protobuf:"bytes,4,opt,name=vscc"`

	//Policy endorsement policy for the chaincode instance
	Policy []byte `protobuf:"bytes,5,opt,name=policy,proto3"`

	//Data data specific to the package
	Data []byte `protobuf:"bytes,6,opt,name=data,proto3"`

	//Id of the chaincode that's the unique fingerprint for the CC
	//This is not currently used anywhere but serves as a good
	//eyecatcher
	Id []byte `protobuf:"bytes,7,opt,name=id,proto3"`

	//InstantiationPolicy for the chaincode
	InstantiationPolicy []byte `protobuf:"bytes,8,opt,name=instantiation_policy,proto3"`
}

ChaincodeData defines the datastructure for chaincodes to be serialized by proto Type provides an additional check by directing to use a specific package after instantiation Data is Type specifc (see CDSPackage and SignedCDSPackage)

func GetChaincodeData 

func GetChaincodeData(ccname string, ccversion string) (*ChaincodeData, error)

GetChaincodeData gets chaincode data from cache if there's one

func (*ChaincodeData) ProtoMessage 

func (*ChaincodeData) ProtoMessage()

ProtoMessage just exists to make proto happy

func (*ChaincodeData) Reset 

func (cd *ChaincodeData) Reset()

Reset resets

func (*ChaincodeData) String 

func (cd *ChaincodeData) String() string

String converts to string

type ChaincodeProvider 

type ChaincodeProvider interface {
	// GetContext returns a ledger context
	GetContext(ledger ledger.PeerLedger) (context.Context, error)
	// GetCCContext returns an opaque chaincode context
	GetCCContext(cid, name, version, txid string, syscc bool, signedProp *pb.SignedProposal, prop *pb.Proposal) interface{}
	// GetCCValidationInfoFromLSCC returns the VSCC and the policy listed by LSCC for the supplied chaincode
	GetCCValidationInfoFromLSCC(ctxt context.Context, txid string, signedProp *pb.SignedProposal, prop *pb.Proposal, chainID string, chaincodeID string) (string, []byte, error)
	// ExecuteChaincode executes the chaincode given context and args
	ExecuteChaincode(ctxt context.Context, cccid interface{}, args [][]byte) (*pb.Response, *pb.ChaincodeEvent, error)
	// Execute executes the chaincode given context and spec (invocation or deploy)
	Execute(ctxt context.Context, cccid interface{}, spec interface{}) (*pb.Response, *pb.ChaincodeEvent, error)
	// ExecuteWithErrorFilder executes the chaincode given context and spec and returns payload
	ExecuteWithErrorFilter(ctxt context.Context, cccid interface{}, spec interface{}) ([]byte, *pb.ChaincodeEvent, error)
	// Stop stops the chaincode given context and deployment spec
	Stop(ctxt context.Context, cccid interface{}, spec *pb.ChaincodeDeploymentSpec) error
	// ReleaseContext releases the context returned previously by GetContext
	ReleaseContext()
}

ChaincodeProvider provides an abstraction layer that is used for different packages to interact with code in the chaincode package without importing it; more methods should be added below if necessary

func GetChaincodeProvider 

func GetChaincodeProvider() ChaincodeProvider

GetChaincodeProvider returns instances of ChaincodeProvider; the actual implementation is controlled by the factory that is registered via RegisterChaincodeProviderFactory

type ChaincodeProviderFactory 

type ChaincodeProviderFactory interface {
	NewChaincodeProvider() ChaincodeProvider
}

ChaincodeProviderFactory defines a factory interface so that the actual implementation can be injected

type SignedCDSData 

type SignedCDSData struct {
	CodeHash      []byte `protobuf:"bytes,1,opt,name=hash"`
	MetaDataHash  []byte `protobuf:"bytes,2,opt,name=metadatahash"`
	SignatureHash []byte `protobuf:"bytes,3,opt,name=signaturehash"`
}

SignedCDSData is data stored in the LSCC on instantiation of a CC for SignedCDSPackage. This needs to be serialized for ChaincodeData hence the protobuf format

func (*SignedCDSData) Equals 

func (data *SignedCDSData) Equals(other *SignedCDSData) bool

Equals data equals other

func (*SignedCDSData) ProtoMessage 

func (*SignedCDSData) ProtoMessage()

ProtoMessage just exists to make proto happy

func (*SignedCDSData) Reset 

func (data *SignedCDSData) Reset()

Reset resets

func (*SignedCDSData) String 

func (data *SignedCDSData) String() string

String converts to string

type SignedCDSPackage 

type SignedCDSPackage struct {
	// contains filtered or unexported fields
}

SignedCDSPackage encapsulates SignedChaincodeDeploymentSpec.

func (*SignedCDSPackage) GetChaincodeData 

func (ccpack *SignedCDSPackage) GetChaincodeData() *ChaincodeData

GetChaincodeData gets the ChaincodeData

func (*SignedCDSPackage) GetDepSpec 

func (ccpack *SignedCDSPackage) GetDepSpec() *pb.ChaincodeDeploymentSpec

GetDepSpec gets the ChaincodeDeploymentSpec from the package

func (*SignedCDSPackage) GetDepSpecBytes 

func (ccpack *SignedCDSPackage) GetDepSpecBytes() []byte

GetDepSpecBytes gets the serialized ChaincodeDeploymentSpec from the package

func (*SignedCDSPackage) GetId 

func (ccpack *SignedCDSPackage) GetId() []byte

GetId gets the fingerprint of the chaincode based on package computation

func (*SignedCDSPackage) GetInstantiationPolicy 

func (ccpack *SignedCDSPackage) GetInstantiationPolicy() []byte

GetInstantiationPolicy gets the instantiation policy from the package

func (*SignedCDSPackage) GetPackageObject 

func (ccpack *SignedCDSPackage) GetPackageObject() proto.Message

GetPackageObject gets the ChaincodeDeploymentSpec as proto.Message

func (*SignedCDSPackage) InitFromBuffer 

func (ccpack *SignedCDSPackage) InitFromBuffer(buf []byte) (*ChaincodeData, error)

InitFromBuffer sets the buffer if valid and returns ChaincodeData

func (*SignedCDSPackage) InitFromFS 

func (ccpack *SignedCDSPackage) InitFromFS(ccname string, ccversion string) ([]byte, *pb.ChaincodeDeploymentSpec, error)

InitFromFS returns the chaincode and its package from the file system

func (*SignedCDSPackage) PutChaincodeToFS 

func (ccpack *SignedCDSPackage) PutChaincodeToFS() error

PutChaincodeToFS - serializes chaincode to a package on the file system

func (*SignedCDSPackage) ValidateCC 

func (ccpack *SignedCDSPackage) ValidateCC(ccdata *ChaincodeData) error

ValidateCC returns error if the chaincode is not found or if its not a ChaincodeDeploymentSpec

Source Files

View all Source files

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL
go.dev uses cookies from Google to deliver and enhance the quality of its services and to analyze traffic. Learn more.